Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
48,316 Commits 71 Branches 509 Tags 716 MiB
Commit Graph

1194 Commits

Author SHA1 Message Date
Henry Wurzburg b6518b6b46 AP_HAL_ChiibOS: change omnibusf4 board type to be unique 2019-08-06 11:20:11 +10:00
Andrew Tridgell 4fca69c5e9 HAL_ChibiOS: renamed Pixhawk6 to Durandal 
new name for FC from Holybro
 2019-08-01 14:11:06 +10:00
Andrew Tridgell adcf9c4fa4 HAL_ChibiOS: added commented out baro on SPI5 for fmuv5 
useful for SPI debugging
 2019-07-29 10:09:08 +10:00
Andrew Tridgell 98f578394f HAL_ChibiOS: default OTG2 protocol to mavlink2 on most boards 
For boards that haven't yet had a driver update in MissionPlanner to
cope with the 2nd OTG interface this change makes both interfaces work
as MAVLink

This also fixes an issue with connecting under a windows VM within
vmware
 2019-07-26 21:58:57 +10:00
bugobliterator cba98096e9 HAL_ChibiOS: move to using hardcoded heater PWM polarity in iofirmware 2019-07-25 17:05:41 +10:00
Andrew Tridgell e57228646e HAL_ChibiOS: added unused CS pins for fmuv5 
these are needed to ensure SPI works correctly if the unused pins are
later attached to a device
 2019-07-19 16:58:10 +10:00
vierfuffzig bed92e8ca8 AP_HAL_ChibiOS: fix buzzer pin define on OMNIBUSF7V2 2019-07-13 17:26:43 +10:00
Andrew Tridgell 2f79639e36 HAL_ChibiOS: added support for MatekF765-Wing 2019-07-13 15:23:45 +10:00
reubenfinch cabd6aec8f AP_HAL_ChibiOS: Correct the README.md for fmuv5 boards 
the IST8310 magnetometer uses I2C, not SPI
 2019-07-12 10:59:48 +01:00
Andrew Tridgell 2f0a4ff1ab HAL_ChibiOS: fixed build on boards with less than max uarts 2019-07-12 17:01:21 +10:00
Andrew Tridgell 1919268801 HAL_ChibiOS: added OTG2 on all F7 and H7 boards with CAN 
allows for SLCAN on 2nd port
 2019-07-12 17:01:21 +10:00
Andrew Tridgell 02014776e8 HAL_ChibiOS: auto-set HAL_HAVE_DUAL_USB_CDC 2019-07-12 17:01:21 +10:00
Siddharth Purohit dcf17e5bc2 HAL_ChibiOS: hwdef: add support for dual cdc on CubeYellow and CubeOrange 2019-07-12 17:01:21 +10:00
Siddharth Purohit 2f0d1336e6 HAL_ChibiOS: add support for dual usd cdc 2019-07-12 17:01:21 +10:00
anbello b65f5bf632 ChibiOS: hwdef revo-mini correct IMU rotation 2019-07-12 14:01:06 +10:00
Andrew Tridgell b12cc57c64 HAL_ChibiOS: switched on fast sampling on IMU3 by default on hex cubes 
as some people are flying with EK2_IMU_MASK=7 this reduces the risk of
aliasing on IMU3
 2019-07-11 10:24:45 +10:00
Andrew Tridgell 3b0bd67afb HAL_ChibiOS: enable CAN on Pixhawk6 2019-07-08 12:19:20 +10:00
Siddharth Purohit 67c925865c HAL_ChibiOS: add support for CAN on STM32H7 boards 2019-07-08 12:18:29 +10:00
Peter Barker a61028c55d AP_HAL_ChibiOS: disable scripting if USE_FATFS=no 2019-07-08 09:55:46 +10:00
Atxheli 7f3cb09da2 correct comment placement for second led 2019-07-04 08:36:33 +10:00
Hwurzburg a9783de61c correct include paths, uncomment alarm pin, fix conflict with rssi 2019-07-04 08:36:33 +10:00
Hwurzburg 3e3d7b8e7f Change to "include" style for new board, fix to allow LED to be used as status indicator 2019-07-04 08:36:33 +10:00
Hwurzburg 10838387c5 Split Omnibus F4 pro and non-pro into two boards to allow pro boards to have 8 pwm outputs 2019-07-04 08:36:33 +10:00
Alexey Kozin e5988f7153 AP_HAL_ChibiOS: fix voltage sensor connected to fmu adc 2019-07-02 06:42:11 +10:00
bugobliterator 7d4a758059 hwdef: fix default battery monitor pins for CubeOrange 2019-06-28 14:18:11 +10:00
Michael du Breuil a34ac14ec5 AP_HAL_ChibiOS: Make BOARD_FLASH_SIZE available at configure time 2019-06-18 00:06:32 -07:00
vierfuffzig 7780e8ed00 AP_HAL_ChibiOS: add support for AIO and OSD board types 
this allows init on board variant without onboard baro
 2019-06-18 10:10:22 +10:00
Andrew Tridgell 51e187342b HAL_ChibiOS: move the power control changes to be only CubeBlack 
This aims to fix #11455. I have been unable to reproduce the issue,
which leaves me thinking it is either a bootloader difference or a hw
difference between pixhawk1 clones and real pixhawk1 boards
 2019-06-09 16:56:14 +10:00
Siddharth Purohit a926effee5 hwdef: iomcu set pin mode to input for autodetecting heater control level 2019-06-08 14:31:01 +10:00
Andrew Tridgell 73bc277470 HAL_ChibiOS: fixed KakuteF7 build 
low on flash
 2019-06-06 12:19:13 +10:00
Andrew Tridgell 2acaada884 HAL_ChibiOS: fixed OMNIBUSF7V2 build 
ran out of flash for plane
 2019-06-06 12:19:13 +10:00
Andrew Tridgell bfdf857b34 HAL_ChibiOS: fixed airbotf4 build 2019-06-06 12:19:13 +10:00
Andrew Tridgell 614a059819 HAL_ChibiOS: convert more boards to using new sensor config system 2019-06-05 18:54:40 +10:00
Andrew Tridgell ff603a1f0b HAL_ChibiOS: convert mini-pix 2019-05-30 15:39:57 +10:00
Andrew Tridgell 4548aa162b HAL_ChibiOS: convert mindpx-v2 2019-05-30 15:39:57 +10:00
Andrew Tridgell 91aa49ba6f HAL_ChibiOS: convert matek boards 2019-05-30 15:39:57 +10:00
Andrew Tridgell fca03bef8d HAL_ChibiOS: convert F4BY 2019-05-30 15:39:57 +10:00
Andrew Tridgell 8605060dfc HAL_ChibiOS: convert F35Lightning 2019-05-30 15:39:57 +10:00
Andrew Tridgell 288d5d6fe6 HAL_ChibiOS: convert DrotekP3Pro 2019-05-30 15:39:57 +10:00
Andrew Tridgell d90b05f685 HAL_ChibiOS: convert all fmuv5 boards to sensor config system 2019-05-30 15:39:57 +10:00
Andrew Tridgell 03bb94599b HAL_ChibiOS: support I2C sensor probes by bus mask 2019-05-30 15:39:57 +10:00
Andrew Tridgell fc1ec8a465 HAL_ChibiOS: convert airbot to new config 2019-05-30 15:39:57 +10:00
Andrew Tridgell 82b171582e HAL_ChibiOS: added sensor config for cube varients 2019-05-30 15:39:57 +10:00
Andrew Tridgell c36d76c213 HAL_ChibiOS: convert Pixhawk1 to new sensor config 
saves 26k of flash, making 1M boards work for longer
 2019-05-30 15:39:57 +10:00
Andrew Tridgell eae852962e HAL_ChibiOS: fixed case of no IMU, BARO or COMPASS config settings 2019-05-30 15:39:57 +10:00
Andrew Tridgell 068e6ea8d2 HAL_ChibiOS: convert KakuteF4 and KakuteF7 to new sensor config 2019-05-30 15:39:57 +10:00
Andrew Tridgell 1b0bf88c8f HAL_ChibiOS: convert crazyflie2 to new config 2019-05-30 15:39:57 +10:00
Andrew Tridgell b47ab5c8a9 HAL_ChibiOS: support I2C sensor config in hwdef.dat 2019-05-30 15:39:57 +10:00
Andrew Tridgell ceb9c3b83e HAL_ChibiOS: convert mRoControlZeroF7 to new sensor config 2019-05-30 15:39:57 +10:00
Andrew Tridgell 5eb488303c HAL_ChibiOS: convert Pixracer to use new sensor config 2019-05-30 15:39:57 +10:00
Andrew Tridgell e198d552a8 HAL_ChibiOS: support IMU, COMPASS and BARO lines in hwdef.dat 
this allows for main sensors to be set in hwdef.dat, making adding new
boards simpler
 2019-05-30 15:39:57 +10:00
Phillip Kocmoud 734abe3d7d hwdef: Correct typo for mRo x2.1-777 USB PID 
This needed to match the firmware directory which contains the compiled binaries hosted at http://firmware.ardupilot.org so that MissionPlanner can automatically download and update firmware.
 2019-05-23 11:05:42 +10:00
Andrew Tridgell d7a0eb42ee HAL_ChibiOS: added logging of watchdog data 
log MON msgs in the leadup to a watchdog, and log a WDOG message after
a watchdog reset
 2019-05-15 15:33:48 +10:00
Andrew Tridgell dbfe6b8019 HAL_ChibiOS: implement persistent_data for watchdog 
this is a much simpler approach to persistent data
 2019-05-15 15:33:48 +10:00
Andrew Tridgell 6333494d99 HAL_ChibiOS: disable peripheral power on boot on fmuv3 
then enable after 100ms, and let settle for 20ms. This is to fix an
issue with peripheral power on consistency with all fmuv3 boards

Thanks to Philip for the suggestion
 2019-05-11 18:45:18 +10:00
Phillip Kocmoud 16f1ec8ce2 HAL_ChibiOS: added missing AF functions for F777 2019-05-10 15:05:42 +10:00
Phillip Kocmoud 9709401595 HAL_ChibiOS: added hwdef for mRoControlZeroF7 2019-05-10 15:05:42 +10:00
Andrew Tridgell 2b0a30a2c5 HAL_ChibiOS: ensure we don't overflow bootloader area 
this modifies the ld script to use the maximum size available for the
bootloader, so we can't accidentially grow the bootloader beyond its
max size
 2019-05-06 12:36:41 +10:00
Andrew Tridgell 11021bbaa9 HAL_ChibiOS: fixed LEDs on new CUAVv5 revision 2019-05-03 16:32:00 +10:00
Andrew Tridgell 8d2f016cc8 HAL_ChibiOS: fixed LEDs on CUAVv5Nano 
need to be opendrain
 2019-05-03 16:32:00 +10:00
Peter Hall 26a6cccf21 AP_HAL_ChibiOS: KakuteF7 add two PWM pin options 2019-05-03 14:47:00 +10:00
Andrew Tridgell 4deb2c38f6 HAL_ChibiOS: fixed brick2 valid status in POWR flags for fmuv5 
and fixed sense of VBUS
 2019-05-03 10:32:41 +10:00
Matt Lawrence f7383179e8 HAL CHIBIOS: Solo stock cube child of fmuv3 instead of CubeBlack 
CubeBlack-Solo hardware def to use FMUv3 as its parent rather than CubeBlack.  Since this older cube doesn't have the same hardware as a new CubeBlack, it is causing conflicts.  Nearly everything is the same.
 2019-04-29 11:14:46 +10:00
Michael du Breuil a4d9853f1d AP_HAL_ChibiOS: Actually enable the wrapper on remove 2019-04-26 08:07:19 +10:00
Jonathan Challinger 183b55d3df AP_HAL_ChibiOS: add define HAL_CHIBIOS_ARCH_CUBEBLACK to cubeblack hwdef 2019-04-24 11:45:14 +10:00
Andrew Tridgell 508aae8f2a HAL_ChibiOS: added save/restore of attitude in backup registers 2019-04-22 16:53:35 +10:00
Andrew Tridgell 730982b3c4 HAL_ChibiOS: fixed build with older gcc 2019-04-22 16:53:35 +10:00
Andrew Tridgell 2778a1b01e HAL_ChibiOS: save/restore home position in backup registers 
# Conflicts:
#	libraries/AP_HAL_ChibiOS/hwdef/common/stm32_util.c
 2019-04-22 16:53:35 +10:00
Andrew Tridgell f0f36c6237 HAL_ChibiOS: fixed watchdog timeout setting 2019-04-22 16:53:35 +10:00
Andrew Tridgell 9ca67dc811 HAL_ChibiOS: implement was_watchdog_armed() 2019-04-22 16:53:35 +10:00
Andrew Tridgell 1acb7e977f HAL_ChibiOS: added ability to restore safety state on watchdog reset 2019-04-22 16:53:35 +10:00
Andrew Tridgell 54cbf8ea9e HAL_ChibiOS: change to 2s timeout on watchdog 
a bit more of a safety net against false positives for stable release
 2019-04-22 16:53:35 +10:00
Andrew Tridgell 58aca561fd HAL_ChibiOS: fixed watchdog on H7 2019-04-22 16:53:35 +10:00
Andrew Tridgell 19526b5826 HAL_ChibiOS: implement scheduler->expect_delay_ms() 2019-04-22 16:53:35 +10:00
Andrew Tridgell a5309b3afa HAL_ChibiOS: record reason for reset 
allows us to tell if reset was due to watchdog
 2019-04-22 16:53:35 +10:00
Andrew Tridgell c09df1ea7b HAL_ChibiOS: added IWDG watchdog support 
this resets the MCU if the main loop stops for 1 second
 2019-04-22 16:53:35 +10:00
Michael du Breuil b0f4611ddc AP_HAL_ChibiOS: Fix python3 with F7 builds 2019-04-20 12:33:44 +10:00
Randy Mackay 69882d9898 AP_HAL_ChibiOS: fix Pixhawk4 readme 2019-04-17 09:08:41 +09:00
Andrew Tridgell 967c6462cb HAL_ChibiOS: rename Pixhawk4Pro to Pixhawk6 2019-04-16 04:33:17 +10:00
Andrew Tridgell 32ebd2080f HAL_ChibiOS: mark SDIO and SDMMC IO as pullup 
this is needed for boards such as PixhackV3 which don't have hardware
pullups. Thanks to Hongle for reporting this.
 2019-04-12 19:44:00 +10:00
Andrew Tridgell a767c15986 HAL_ChibiOS: change CUAVv5Nano default PWM count to 11 2019-04-08 08:21:39 -07:00
Andrew Tridgell c6637fbe38 HAL_ChibiOS: fixed CUAVv5Nano uarts 2019-04-08 08:21:39 -07:00
Andrew Tridgell ce4abf8dcb HAL_ChibiOS: support for CUAVv5Nano board 
F765 with no IOMCU
 2019-04-08 08:21:39 -07:00
Andrew Tridgell d59cf15594 HAL_ChibiOS: enable heater pin on Pixhawk4Pro 2019-04-06 10:08:39 +11:00
Siddharth Purohit 7b54103271 HAL_ChibiOS: set pwm select pins high for 3.3V PWMout on startup 2019-04-01 21:30:12 +11:00
Siddharth Purohit 051842ea34 HAL_ChibiOS: add support for PWM Voltage level selection on CubeYellow and CubeOrange 2019-04-01 21:30:12 +11:00
Tom Pittenger 91b0650765 AP_HAL_ChibiOS: rename dataflash to logger 2019-03-28 16:40:58 +11:00
Andrew Tridgell 591e2ebeea HAL_ChibiOS: remove unused config files 
these do not build correctly
 2019-03-15 20:08:26 +11:00
Andrew Tridgell d942b64584 HAL_ChibiOS: fixed NucleoH743 build 2019-03-15 20:08:26 +11:00
Andrew Tridgell bf0a4a23b2 HAL_ChibiOS: fixed build of crazyflie2 2019-03-15 20:08:26 +11:00
Andrew Tridgell b754d56ecb HAL_ChibiOS: fixed revo-mini build 2019-03-15 11:54:57 +11:00
Andrew Tridgell 69edd5a544 HAL_ChibiOS: fixed typos in hwdef.dat files 2019-03-15 11:54:57 +11:00
Andrew Tridgell cd27e3022f HAL_ChibiOS: check for prefix match on peripherals 2019-03-15 11:54:57 +11:00
Andrew Tridgell 3fd3e88d04 HAL_ChibiOS: fixed typo 
thanks to Malcolm Churn for noticing
 2019-03-15 08:51:52 +11:00
Andrew Tridgell b3f48a1477 HAL_ChibiOS: added CS line for Pixhawk4Pro temp sensor 2019-03-14 16:10:40 +11:00
Andrew Tridgell 2842063146 HAL_ChibiOS: optimize CubeYellow build 
and fixed comment in CubeOrange
 2019-03-11 12:40:21 +11:00
Andrew Tridgell 59652ad147 HAL_ChibiOS: added more IMU devices for Hex Cube boards 2019-03-11 12:40:21 +11:00
Andrew Tridgell 7577ebb33e HAL_ChibiOS: added bootloader hwdef for mindpx-v2 2019-03-11 09:58:12 +11:00
Andrew Tridgell 26d1371d25 HAL_ChibiOS: separate out DMA allocation for sdcard IO 
this fixes an issue with DMA to SPI6 on STM32H7. On the H7 SRAM4 can
be used for DMA and BDMA to all devices except for SDMMC which uses
IDMA.

by separating out DMA of sdcard data from other data we can arrange
for DMA to all devices to work
 2019-03-09 07:33:47 +11:00
Siddharth Purohit fef81b6381 HAL_ChibiOS: add support for new main sensors 2019-03-06 20:47:10 +11:00
Andrew Tridgell 160de969a5 HAL_ChibiOS: simplify H7 clock tree setup 
and push more peripherals to max of 100MHz
 2019-03-04 21:42:07 +11:00
Andrew Tridgell 5bcfe41d1f HAL_ChibiOS: push H7 clock to 400MHz 2019-03-04 19:38:06 +11:00
Andrew Tridgell a59e1d0e0f HAL_ChibiOS: fixed H7 dma sharing between BDMA and DMA 
the BDMA and DMA controllers have separate namespaces for streams, so
we can allocate a lot more streams than we were
 2019-03-02 20:50:59 +11:00
Andrew Tridgell c7ca6d77c7 HAL_ChibiOS: H7 doesn't need a DMA mapping for SDMMC 
it uses a dedicated internal DMA controller in the SDMMC peripheral
 2019-03-02 20:50:59 +11:00
Andrew Tridgell 6f07d804b9 HAL_ChibiOS: adjust Pixhawk4Pro VBUS and DMA priority 2019-03-02 20:50:59 +11:00
Andrew Tridgell 603d9f6907 HAL_ChibiOS: fixed typo in ITCM base address 2019-03-02 09:01:20 +11:00
Andrew Tridgell 4c12ba4c2c HAL_ChibiOS: fixed SDMMC IRQ priority 2019-03-01 11:39:27 +11:00
Andrew Tridgell 2f833c92d3 HAL_ChibiOS: enable SDMMC for CubeOrange 2019-03-01 11:39:12 +11:00
Andrew Tridgell 37010a568e HAL_ChibiOS: enable SDMMC on Pixhawk4Pro 2019-03-01 11:39:12 +11:00
Andrew Tridgell e192bc6c10 HAL_ChibiOS: adjust H7 clocks, and enabled SDMMC 2019-03-01 11:39:12 +11:00
Andrew Tridgell ff28337bfd HAL_ChibiOS: fixed typos 2019-03-01 07:27:47 +11:00
Andrew Tridgell 64681cb05c HAL_ChibiOS: allocate threads from any heap 
this fixes a failure on MatekF405-Wing where it fails to allocate the
SPI thread for the IMU
 2019-02-27 11:54:28 +11:00
Andrew Tridgell 3a2227c912 HAL_ChibiOS: updated IDs for CubeOrange 2019-02-26 18:21:13 +11:00
Andrew Tridgell ff4614b399 HAL_ChibiOS: rename CubeH7 to CubeOrange 2019-02-26 18:21:13 +11:00
Andrew Tridgell 26e76e51ed HAL_ChibiOS: fixed H7 build with older compilers 2019-02-26 16:18:26 +11:00
Andrew Tridgell 70930cca29 HAL_ChibiOS: fixed bootloader build with gcc 4.9 2019-02-26 16:18:26 +11:00
Andrew Tridgell 723e8a23fc HAL_ChibiOS: enable HSE_BYPASS for NucleoH743 2019-02-26 16:18:26 +11:00
Andrew Tridgell f8aeeb0333 HAL_ChibiOS: adjust clock tree to be more consistent 
use 96MHz for all peripheral buses
 2019-02-26 16:18:26 +11:00
Andrew Tridgell 5dd82f1d63 HAL_ChibiOS: adjust 16MHz HSE settings for H743 (CubeH7) 2019-02-26 16:18:26 +11:00
Andrew Tridgell b0f4494c4a HAL_ChibiOS: fixed DMA on SPI for Pixhawk4Pro 2019-02-26 16:18:26 +11:00
Andrew Tridgell 312597ac20 HAL_ChibiOS: fixed default batt2 pins for fmuv5 2019-02-26 16:18:26 +11:00
Andrew Tridgell 584e36e360 HAL_ChibiOS: switch Holybro to their own VID 2019-02-26 16:18:26 +11:00
Andrew Tridgell 9966fbea0f HAL_ChibiOS: fixed bootloader build error 2019-02-26 16:18:26 +11:00
Andrew Tridgell 8e745f74fb HAL_ChibiOS: support SPI6 on Pixhawk4Pro 2019-02-26 16:18:26 +11:00
Andrew Tridgell 75cd20aea4 HAL_ChibiOS: handle DMAMUX2 on H7 
with BDMA
 2019-02-26 16:18:26 +11:00
Andrew Tridgell e43ad56920 HAL_ChibiOS: fixed Pixhawk4Pro battery defaults 2019-02-26 16:18:26 +11:00
Andrew Tridgell 87e7ea368f HAL_ChibiOS: fixed battery monitoring and buzzer for Pixhawk4Pro 2019-02-26 16:18:26 +11:00
Andrew Tridgell 542372014e HAL_ChibiOS: enable SPI5 on Pixhawk4Pro 2019-02-26 16:18:26 +11:00
Andrew Tridgell 778d892fc2 HAL_ChibiOS: fixed dma resolved for H7 2019-02-26 16:18:26 +11:00
Andrew Tridgell bf783e73ab HAL_ChibiOS: use polled SPI for Pixhawk4Pro for now 
and disable sensors rail till later in startup
 2019-02-26 16:18:26 +11:00
Andrew Tridgell e92c66418d HAL_ChibiOS: fixed bouncebuffer code on STM32F7 2019-02-26 16:18:26 +11:00
Andrew Tridgell a3e69e715d HAL_ChibiOS: avoid doing one-way SPI transfers 
these transfers use dummy bytes in the hal driver, which may not be in
DMA safe memory, so best to avoid them
 2019-02-26 16:18:26 +11:00
Andrew Tridgell cda1959629 HAL_ChibiOS: added support for more flexible memory regions 
this allows for an arbitrary number of memory regions, with each one
flagged as DMA safe, fast or normal
 2019-02-26 16:18:26 +11:00
Andrew Tridgell 5f88340919 HAL_ChibiOS: fixed flash build warning 2019-02-26 16:18:26 +11:00
Andrew Tridgell 8a40ee8132 HAL_ChibiOS: fixed idle wait on H7 flash program 2019-02-26 16:18:26 +11:00
Andrew Tridgell 1d6c877c3c HAL_ChibiOS: set board type on PH4Pro 2019-02-26 16:18:26 +11:00
Andrew Tridgell 6177129e41 HAL_ChibiOS: fixed typo in dma_resolver.py 2019-02-26 16:18:26 +11:00
Andrew Tridgell 4e067ee3cd HAL_ChibiOS: fixed DMA on TIM12 for Pixhawk4Pro 2019-02-26 16:18:26 +11:00
Andrew Tridgell dd835f5fce HAL_ChibiOS: optimize for speed on more boards 2019-02-26 16:18:26 +11:00
Andrew Tridgell 34a7812416 HAL_ChibiOS: use -O3 on boards with 2M flash 2019-02-26 16:18:26 +11:00
Andrew Tridgell b07ba37359 HAL_ChibiOS: pass optimization to ChibiOS build 2019-02-26 16:18:26 +11:00
Andrew Tridgell 77d4e1f796 HAL_ChibiOS: removed ID_ANY streams for H7 
use generated map instead
 2019-02-26 16:18:26 +11:00
Andrew Tridgell ee1d2e8edb HAL_ChibiOS: adjust H743 DMA settings 2019-02-26 16:18:26 +11:00
Andrew Tridgell cb77b06460 HAL_ChibiOS: generate a dma map for H7 
this allows for DMA sharing, allowing for more peripherals with DMA
 2019-02-26 16:18:26 +11:00
Andrew Tridgell 423ad60c47 HAL_ChibiOS: enable all DMAs on Pixhawk4Pro 2019-02-26 16:18:26 +11:00
Andrew Tridgell 718cf4377d HAL_ChibiOS: reduce DMA count until we can share 2019-02-26 16:18:26 +11:00
Andrew Tridgell 0c01375799 HAL_ChibiOS: enable IOMCU for CubeH7 2019-02-26 16:18:26 +11:00
Andrew Tridgell 9647a68c9e HAL_ChibiOS: fixed UART RX DMA for H7 2019-02-26 16:18:26 +11:00
Andrew Tridgell 6422068e6b HAL_ChibiOS: fixed analog input on H7 2019-02-26 16:18:26 +11:00
Andrew Tridgell efc8da9f9a HAL_ChibiOS: enable TX DMA on uarts on H7 2019-02-26 16:18:26 +11:00
Andrew Tridgell f4e31ce65b HAL_ChibiOS: added more cache flush ops 2019-02-26 16:18:26 +11:00
Andrew Tridgell 46787fe7d8 HAL_ChibiOS: adjust clocks for H743 2019-02-26 16:18:26 +11:00
Andrew Tridgell 8e52ed4e9b HAL_ChibiOS: update Pixhawk4Pro hwdef 2019-02-26 16:18:26 +11:00
Andrew Tridgell b662adf8cc HAL_ChibiOS: setup sensors on NucleoH743 2019-02-26 16:18:26 +11:00
Andrew Tridgell c0e47754fa HAL_ChibiOS: enable more peripherals on CubeH7 2019-02-26 16:18:26 +11:00
Andrew Tridgell d6bedc3bdf HAL_ChibiOS: use ifndef on more peripheral types 2019-02-26 16:18:26 +11:00
Andrew Tridgell 6fb40a9713 HAL_ChibiOS: set FPU=hard if not set elsewhere 2019-02-26 16:18:26 +11:00
Andrew Tridgell f753669a58 HAL_ChibiOS: improved check for DTCM ram 2019-02-26 16:18:26 +11:00
Andrew Tridgell a4687930b0 HAL_ChibiOS: enable FRAM for storage 2019-02-26 16:18:26 +11:00
Andrew Tridgell 37bcd6e7d8 HAL_ChibiOS: default to timer 5 for H7 2019-02-26 16:18:26 +11:00
Andrew Tridgell e6b41fbe0b HAL_ChibiOS: added initial CubeH7 hwdef 2019-02-26 16:18:26 +11:00
Andrew Tridgell e581be8df7 HAL_ChibiOS: optionally disable DCache on H7 2019-02-26 16:18:26 +11:00
Andrew Tridgell 46cb506a22 HAL_ChibiOS: added cache management for H7 in bouncebuffer code 2019-02-26 16:18:26 +11:00
Andrew Tridgell 50b7b7beb5 HAL_ChibiOS: disable DTCM on H7 for now 
DTCM doesn't allow for DMA yet
 2019-02-26 16:18:26 +11:00
Andrew Tridgell ff21508ce8 HAL_ChibiOS: ensure 32 byte alignment for DMA on H7 2019-02-26 16:18:26 +11:00
Andrew Tridgell c36f677c94 HAL_ChibiOS: initial hwdef for Pixhawk4Pro 2019-02-26 16:18:26 +11:00
Andrew Tridgell 5faec2f869 HAL_ChibiOS: removed HSE bypass for NucleoH743 
not needed any more
 2019-02-26 16:18:26 +11:00
Andrew Tridgell 0691e23219 HAL_ChibiOS: setup some sensors on NucleoH743 2019-02-26 16:18:26 +11:00
Andrew Tridgell 4b01e2c3b3 HAL_ChibiOS: fixed clock tree for no LSE on H7 2019-02-26 16:18:26 +11:00
Andrew Tridgell 3c9ba02ce9 HAL_ChibiOS: fixed H7 flash 2019-02-26 16:18:26 +11:00
Andrew Tridgell 8c55f7bc49 HAL_ChibiOS: enable debug on SD7 for bootloader for NucleoH743 2019-02-26 16:18:26 +11:00
Andrew Tridgell 52b47e499b HAL_ChibiOS: fixed H7 clock tree for ADC driver 2019-02-26 16:18:26 +11:00
Andrew Tridgell de335f14d7 HAL_ChibiOS: fixed GPIO init for H7 2019-02-26 16:18:26 +11:00
Andrew Tridgell 1fa0a2eeca HAL_ChibiOS: fixed peripheral enables on H7 2019-02-26 16:18:26 +11:00
Andrew Tridgell acf77ba49a HAL_ChibiOS: fixed dma resolver for H7 2019-02-26 16:18:26 +11:00
Andrew Tridgell ae448a6932 HAL_ChibiOS: enable DMA checking on H7 2019-02-26 16:18:26 +11:00
Andrew Tridgell 51b4d54f70 HAL_ChibiOS: disable show_stack_usage in bootloader 2019-02-26 16:18:26 +11:00
Andrew Tridgell 565706cf7e HAL_ChibiOS: fixed H7 flash handling 2019-02-26 16:18:26 +11:00
Andrew Tridgell c2746ca9f9 HAL_ChibiOS: simplify H7 hwdef.dat 2019-02-26 16:18:26 +11:00
Andrew Tridgell 84ac98622c HAL_ChibiOS: fixed charset issue in H7 database 2019-02-26 16:18:26 +11:00
Andrew Tridgell 227ecc53ac HAL_ChibiOS: support mcuconf for STM32H7 MCU 2019-02-26 16:18:26 +11:00
Andrew Tridgell 972ae519a6 HAL_ChibiOS: added minimal hwdef for STM32H743 Nucleo board 2019-02-26 16:18:26 +11:00
Andrew Tridgell aab911ac50 HAL_ChibiOS: added hwdef database for STM32H743 2019-02-26 16:18:26 +11:00
Andrew Tridgell 1b06b0f41c HAL_ChibiOS: fixed F765 build 2019-02-26 16:18:26 +11:00
Andrew Tridgell ceb0ec70f9 HAL_ChibiOS: disable pipes API 
not used
 2019-02-26 16:18:26 +11:00
Andrew Tridgell 908b444a50 HAL_ChibiOS: update halconf for VER_7_0 API 2019-02-26 16:18:26 +11:00
Andrew Tridgell 247bb433ec HAL_ChibiOS: update chconf.h for VER_6_0 API 2019-02-26 16:18:26 +11:00
Andrew Tridgell 17d804f051 HAL_ChibiOS: fixed GPIO numbering for KakuteF4 2019-02-22 11:34:43 +11:00
Stephen Dade de37e2e179 HAL_ChibiOS: Corrected servo output order for KakuteF4 2019-02-22 11:34:43 +11:00
Andrew Tridgell 70a10c6375 HAL_ChibiOS: adjust TBS-F7 bootloader setup 2019-02-22 10:27:17 +11:00
Andrew Tridgell 5319fbb52b HAL_ChibiOS: enable heater pin on TBS-Colibri-F7 2019-02-22 10:27:17 +11:00
Andrew Tridgell 27a1fec911 HAL_ChibiOS: TBS-F7 is active low on sd power 2019-02-22 10:27:17 +11:00
Andrew Tridgell 94bace91a4 HAL_ChibiOS: bring up sensors rail after boot on TBS F7 
this prevents a reset loop on GPIO config
 2019-02-22 10:27:17 +11:00
Andrew Tridgell 025bd7e0d8 HAL_ChibiOS: added support for TBS-Colibri-F7 
This is a fmuv5 board varient
 2019-02-22 10:27:17 +11:00
Andrew Tridgell 54ffeef20e HAL_ChibiOS: fixed pixhawk4 i2c bus numbers 2019-02-12 15:20:36 +11:00
Andrew Tridgell 5ab75b5ccb HAL_ChibiOS: updated Pixhawk4 pinout 2019-02-12 15:17:27 +11:00
Andrew Tridgell ee97f0dccd HAL_ChibiOS: setup power brick on mini-pix by default 2019-02-10 19:51:51 +11:00
Andrew Tridgell bb76143095 HAL_ChibiOS: fixed mini-pix uart order 2019-02-04 08:21:58 +11:00
Andrew Tridgell ff52ceabba HAL_ChibiOS: fixed default volt and current pins for VRBrain 2019-01-24 18:41:38 +11:00
LukeMike e15d2c0f89 HAL_ChibiOS: added ChibiOS configuration of VR Brain 5.4 2019-01-24 18:41:38 +11:00
LukeMike 33f7f5b7b6 HAL_ChibiOS: added ChibiOS configuration for VR Core 1.0 2019-01-24 18:41:38 +11:00
LukeMike f615ab9a0a HAL_ChibiOS: added ChibiOS configuration for VR Brain 5.1 2019-01-24 18:41:38 +11:00
LukeMike db61e50fe8 HAL_ChibiOS: fixed USB_PRODUCT for VR Brain 5.2 2019-01-24 18:41:38 +11:00
Andrew Tridgell 18e97bd895 HAL_ChibiOS: fixed CAN on Pixhawk4 and PH4-mini 
the silent pins floating disabled CAN
 2019-01-23 13:24:13 +11:00
Andrew Tridgell f98bfb1a35 HAL_ChibiOS: enable flash logging on Omnibus and speedybeef4 2019-01-23 09:00:42 +11:00
Andrew Tridgell c9bab2f36e HAL_ChibiOS: enable dataflash logging on AirbotF4 2019-01-21 21:57:21 +11:00
Andrew Tridgell 7219ec3482 HAL_ChibiOS: enabled df logging on revo and sparky2 2019-01-21 21:57:21 +11:00
Andrew Tridgell 2882e5d5e1 HAL_ChibiOS: enable dataflash logging on KakuteF4 2019-01-21 21:57:21 +11:00
Andrew Tridgell 2765f6e8f0 HAL_ChibiOS: setup APJ board IDs in environment 2019-01-19 17:19:41 +11:00
Andrew Tridgell b8aa6e5834 HAL_ChibiOS: rename VRBrain hwdef folders 
nicer names in fw download
 2019-01-18 11:49:19 +11:00
LukeMike aa0a2aaba2 HAL_ChibiOS: final base configuration of the Brain VR Micro Brain 5.1. 
- Bootloader (32k) - Tested
- 3 UART (GPS, Telemetry and AUX - debug enable on Telemetry) - Tested
- MS5611 driver - Tested
- MPU600 driver - Tested
- HMC5883 External - Tested
- SD Card - Tested
- Parameters on Flash (32k reserved) - Tested
- Buzzer (no timer available for tonealarm) - Tested
- External LEDs (Arm and GPS) - Tested
- OnBord LEDs - Tested
- 2 Relay (from 33 to 34) - Tested
- Voltage Battery Monitor - Tested
- 14 PWM available (GPIO mapped from 50 to 63) - Tested
 2019-01-18 11:49:19 +11:00
LukeMike 9f3b57f7eb HAL_ChibiOS: final base configuration of the Brain VR board 5.2. 
- Bootloader (16k) - Tested
- 3 UART (GPS, Telemetry and AUX - debug enable on Telemetry) - Tested
- MS5611 driver - Tested
- MPU600 driver - Tested
- HMC5883 Internal and External - Tested
- SD Card - Tested
- RAMTRON - Tested
- Buzzer (no timer available for tonealarm) - Tested
- External LEDs (Arm and GPS) - Tested
- OnBord LEDs - Tested
- 3 Relay (from 33 to 35) - Tested
- Voltage and Current Battery Monitor - Tested
- 14 PWM available (GPIO mapped from 50 to 63) - Tested
 2019-01-18 11:49:19 +11:00
LukeMike 2146368e7c HAL_ChibiOS: added ChibiOS support for VR Micro Brain 5.1 2019-01-18 11:49:19 +11:00
LukeMike 13d1d281e1 HAL_ChibiOS: added ChibiOS support for VR Brain 5.2 2019-01-18 11:49:19 +11:00
Nigel Williams 071dca8fe8 HAL_ChibIOS: Fix INS default rotation for OmnibusNanoV6 
This makes the default orientation match betaflight (i.e. USB
connector top of the board at the front, ESC connector bottom of the
board to the rear).
 2019-01-18 11:00:43 +11:00
Andrew Tridgell 17d62be9bb HAL_ChibiOS: disable USART6_TX on fmuv5 
this prevents it acting as a pullup on SBUS input for Pixhawk4. Thanks
to David Sidrane for the suggestion.
 2019-01-18 10:24:27 +11:00
Andrew Tridgell 155ccdd6e1 HAL_ChibiOS: added extra LEDs for CUAVv5 2019-01-17 12:29:44 +11:00
Michael du Breuil 3aee083540 AP_HAL_ChibiOS: Fix FMUv2 LED lighting up 2019-01-11 17:45:43 +11:00
murata 6bb11b5cc8 HAL_ChibiOS: Get the number of characters in strlen 2019-01-09 10:12:51 +11:00
Michael du Breuil e8373e1fdf AP_HAL_ChibiOS: add scripting heap 2018-12-31 19:25:23 -07:00
Andrew Tridgell 8188b4a039 HAL_ChibiOS: fixed card inserted test for SDC 2018-12-31 08:00:14 +11:00
Andrew Tridgell 4886ccd8ba HAL_ChibiOS: fixed safety switch and LEDs on PH4-mini 
fixes #10127
 2018-12-29 15:50:00 +11:00
Siddharth Purohit 8d850e979a HAL_ChibiOS: add CubePurple/PH2Slim board config 2018-12-28 14:33:14 +11:00
Matt d4bd7e790a HAL_ChibiOS: Add hwdef for Solo's Cube Black & Green 
Adds hwdef files for the 3DR Solo.  CubeBlack-solo is based on the
CubeBlack hwdef, with the only difference being default parameters
required by the Solo.  CubeGreen-solo is is also identical to CubeBlack,
but has default parameters required by those with a Green Cube in their
Solo.  Parameter default files are pulled from the Tools\Frame_Parms
directory where the Solo's parameter files are maintained.
 2018-12-11 10:45:37 +11:00
Andrew Tridgell 735a4b6f18 HAL_ChibiOS: setup PH4 for right voltage scaling 2018-12-10 07:45:34 +11:00
Jani Hirvinen d9b9638b4a HAL_ChibiOS: fixed F405 PE15 afnum 
should be 15 and not 1
 2018-12-06 12:43:47 +11:00
Siddharth Purohit 8df52aba29 HAL_ChibiOS: move vsnprintf call to redirect Ardupilot's instead of ChibiOS's 2018-11-29 16:36:29 +11:00
Andrew Tridgell 7459709acb HAL_ChibiOS: allow ROMFS to override a file 
this allows a hwdef.dat with an include to change an embedded file
specified in the include
 2018-11-28 10:35:50 +11:00
Michael du Breuil 8c464572d8 AP_HAL_ChibiOS: Use a less clever version of realloc 
The clever version loses access to memory, and is excessively hard coded
 2018-11-26 22:32:56 +00:00
Andrew Tridgell 1428594daf HAL_ChibiOS: fixed uart order for PH4-mini 
thanks to Arthur from Holybro
 2018-11-21 09:29:15 +11:00
Andrew Tridgell 8ac18f343f HAL_ChibiOS: added note on KakuteF7 ESC telem 2018-11-20 19:47:48 +11:00
Andrew Tridgell 08199eb5ff HAL_ChibiOS: updated KakuteF7 docs 2018-11-20 19:45:08 +11:00
Andrew Tridgell 62f07f36c7 HAL_ChibiOS: updated KakuteF4 docs 2018-11-20 19:16:37 +11:00
Andrew Tridgell 101b12617d HAL_ChibiOS: updated PH4-mini docs 2018-11-20 18:46:35 +11:00
Andrew Tridgell eac6435dec HAL_ChibiOS: allow CAP ports to be used as PWM on PH4-mini 2018-11-20 18:46:34 +11:00
Andrew Tridgell a6ab885866 HAL_ChibiOS: fixed typo in F767 pin def file 2018-11-20 18:28:11 +11:00
Andrew Tridgell cfc6ec5e57 HAL_ChibiOS: added PH4-mini docs 2018-11-20 17:26:14 +11:00
Andrew Tridgell 7c2dc84d45 HAL_ChibiOS: added Pixhawk4 docs 2018-11-20 16:19:00 +11:00
Andrew Tridgell 9f22dae444 HAL_ChibiOS: added docs for CUAVv5 2018-11-20 16:03:34 +11:00
Andrew Tridgell d422e6a6ff HAL_ChibiOS: correct SPKT pin numbers for CubeBlack 2018-11-20 15:23:06 +11:00
Andrew Tridgell 742d8b8933 HAL_ChibiOS: pixracer and cube doc updates 2018-11-20 15:09:51 +11:00
Andrew Tridgell 8a85d9db69 HAL_ChibiOS: added CubeBlack docs 2018-11-20 14:52:48 +11:00
Andrew Tridgell 715ac2d6c5 HAL_ChibiOS: fixed error in pixracer docs 2018-11-20 13:37:07 +11:00
Andrew Tridgell 35db9c4b85 HAL_ChibiOS: added Pixracer docs 2018-11-20 13:32:46 +11:00
Andrew Tridgell 62be29fbcf HAL_ChibiOS: added board docs for KakuteF4 2018-11-18 21:37:56 +11:00
Andrew Tridgell 39003905b9 HAL_ChibiOS: re-arrange KakuteF4 UARTs 
this allows for FrSky S.PORT on Telem2, and enables it by default
 2018-11-18 21:37:56 +11:00
Andrew Tridgell da402f4fb7 HAL_ChibiOS: fixed KakuteF7 UART order 2018-11-18 15:56:42 +11:00
Andrew Tridgell fa487fe1bc HAL_ChibiOS: added Pixhawk1 docs 2018-11-18 15:56:42 +11:00
Andrew Tridgell 774cea0dd5 HAL_ChibiOS: added KakuteF7 docs 2018-11-18 14:59:04 +11:00
Andrew Tridgell adf7fefc2e HAL_ChibiOS: detect stuck I2C bus and clear with SCL 
This detects the I2C bus becoming stuck with SDA low after a timeout
and clears the bus by toggling SCL. Many thanks to @jhw84 for the
suggestion
 2018-11-16 08:30:40 +11:00
Andrew Tridgell a0ed658fcc HAL_ChibiOS: added palReadLineMode() function 
used to change and restore line modes
 2018-11-16 08:30:40 +11:00
Andrew Tridgell b346d82f96 HAL_ChibiOS: allow frsky invert for p3pro and mindpx-v2 2018-11-14 19:05:09 +11:00
Andrew Tridgell f0c13d4089 HAL_ChibiOS: allow user control of frsky inversion on Pixracer 2018-11-14 19:05:09 +11:00
Andrew Tridgell bd117f1548 HAL_ChibiOS: define pins for inverting uarts 2018-11-14 19:05:09 +11:00
Andrew Tridgell d824cf0a40 HAL_ChibiOS: default the battery2 pins correctly for CubeBlack 2018-11-13 14:33:17 +11:00
Michael du Breuil be8d4e6c9d AP_HAL_ChibiOS: Assume that IOMCU implies servo voltage monitoring 2018-11-12 23:29:04 +00:00
Michael du Breuil a5115930dd AP_HAL_ChibiOS: Fix board voltage checks being disabled 2018-11-12 23:29:04 +00:00
Andrew Tridgell f48c3da497 HAL_ChibiOS: fixed undefine typo 2018-11-11 07:07:52 +11:00
vierfuffzig f8d43bc96b HAL_ChibiOs: add default support for board versions with ICM20602 2018-11-11 07:07:52 +11:00
Andrew Tridgell 24ba876e88 HAL_ChibiOS: don't use STDOUT_SERIAL on mindpx-v2 or cube-red 
better to use USB, giving us one more uart
 2018-11-10 14:12:42 +11:00
auturgy 575d03796c AP_HAL_ChibiOS: fix typo in fmuv5 hwdef [NFC] 
header comment fixed from fmuv3 to fmuv5
 2018-11-09 18:58:27 +09:00
vierfuffzig d204939cb2 AP_HAL_ChibiOS: set default type for boards with onboard OSD 2018-11-09 08:12:51 +11:00
Andrew Tridgell a0c57979ab HAL_ChibiOS: use opendrain outputs for LEDs on iomcu 2018-11-07 07:35:45 +11:00
Andrew Tridgell a69f66eadd HAL_ChibiOS: ensure RCIN sigbuf has even number of words 
ObjectBuffer rounds up by 1, leaving an odd number of words, which
caused DSM RC input corruption
 2018-11-07 07:35:45 +11:00
Andrew Tridgell e3a01c661f HAL_ChibiOS: switched to USB for console on pixracer 2018-11-07 07:35:45 +11:00
Andrew Tridgell d18277487e HAL_ChibiOS: use RCIN pin for only PPM only on iomcu 
use uarts for SBUS and other serial protocols
 2018-11-07 07:35:45 +11:00
Andrew Tridgell 7c1ba15031 HAL_ChibiOS: fixed syntax error on RCIN pin for iomcu 2018-11-07 07:35:45 +11:00
Andrew Tridgell 86ab3d7669 HAL_ChibiOS: turn off green ring LED on cube 2018-11-07 07:35:45 +11:00
Andrew Tridgell fcc259ae31 HAL_ChibiOS: separate out F1 CR1 calculations 
and modify pin speeds for iomcu uarts
 2018-11-07 07:35:45 +11:00
Andrew Tridgell 7e66bb69b9 HAL_ChibiOS: enable amber LED on iomcu 2018-11-07 07:35:45 +11:00
Andrew Tridgell f69360844f HAL_ChibiOS: enable USART1 for iomcu for spektrum input 2018-11-07 07:35:45 +11:00
Andrew Tridgell 065dba973b HAL_ChibiOS: fixed build warning on iomcu 2018-11-07 07:35:45 +11:00
fat_dell d1f557e96b HAL_ChibiOS: added Omnibusf4v6 board, based on omnibusnanov6. 2018-11-04 22:00:15 +11:00
vierfuffzig e04ebb1326 HAL_ChibiOS: set BATT_MON default on boards with onboard volt/curr sens 2018-10-31 21:29:33 +11:00
Andrew Tridgell 78a32df2e7 HAL_ChibiOS: make all boards base GPIOs for servos at 50 
this makes the docs for GPIO pins consistent across boards
 2018-10-31 20:10:52 +11:00
fnoop deeaf6ec09 AP_HAL_ChibiOS: Add UARTS to F405-Wing bootloader 
AP_HAL_ChibiOS: Add pins to support new UART_ORDER uarts

AP_HAL_ChibiOS: Add UARTs to F405-Wing hwdef-bl.dat to support firmware upload on UARTS
 2018-10-31 16:01:39 +11:00
Andrew Tridgell 7e777d8b28 HAL_ChibiOS: disable loop() delay for iofirmware 2018-10-30 13:00:48 +11:00
Andrew Tridgell b3946fc458 HAL_ChibiOS: added uart for sbus out in IOMCU 2018-10-30 13:00:48 +11:00
Andrew Tridgell af4340d1d1 HAL_ChibiOS: enable analog input on IOMCU 2018-10-30 13:00:48 +11:00
Andrew Tridgell a6b35d6496 HAL_ChibiOS: restore old ODR behaviour for F4 boards 
This fixes an issue with ESP8366 on Pixracer
 2018-10-30 12:49:16 +11:00
Andrew Tridgell 6dd44a6d35 HAL_ChibiOS: fixed LED mapping for fmuv4 2018-10-29 14:04:32 +11:00
vierfuffzig 895cc0713b ChibiOS: fix F35Lightning default BATT_CURR_SCALE 2018-10-24 07:45:10 +10:00
Andrew Tridgell d644150871 HAL_ChibiOS: fixes for DrotekP3Pro 2018-10-21 09:59:44 +11:00
Kevin Lopez Alvarez 6f99c706d6 HAL_ChibiOS: add MCU tables for STM32F469 2018-10-21 09:59:44 +11:00
Kevin Lopez Alvarez bf745d1960 HAL_ChibiOS: add DrotekP3Pro hardware definitions 2018-10-21 09:59:44 +11:00
Phillip Kocmoud 44fb61da37 HAL_ChibiOS: mRo X2.1-777 / hwdef.dat 
Set proper sensor orientation.
 2018-10-21 07:50:44 +11:00
Andrew Tridgell c622a4c4d6 HAL_ChibiOS: fixed output pins on F100 iomcu 2018-10-17 16:45:37 +11:00
Andrew Tridgell 7b67146bc4 HAL_ChibiOS: use less memory in SoftSigReader 2018-10-17 15:11:28 +11:00
Andrew Tridgell d083cd87d6 HAL_ChibiOS: disable debug code by default for iomcu 
use --enable-asserts instead
 2018-10-17 15:11:28 +11:00
Andrew Tridgell d7aaaa35bd HAL_ChibiOS: disable RCIN and timer threads for iomcu 2018-10-17 15:11:28 +11:00
Andrew Tridgell 4674a1c68d HAL_ChibiOS: fixed system time for clocks other than 1MHz 
needed for IOMCU
 2018-10-17 15:11:28 +11:00
rain-er 565b370330 UART4 added for BLHeli ESC telemetry 2018-10-17 13:57:19 +11:00
Phillip Kocmoud f1d223a32a HAL_ChibiOS: Add support for the mRo X2.1-777 
a new flight controller from Mayan Robotics based on the x2.1 upgraded to a STM32F777 MCU
 2018-10-16 09:37:39 +11:00
vierfuffzig 2243c524db Chibios: Add board FuriousFPV F35Lightning 2018-10-12 20:28:50 +11:00
Andrew Tridgell bcc1bd9752 HAL_ChibiOS: added realloc implementation 
needed for AP_Scripting
 2018-10-09 10:08:52 +11:00
Michael du Breuil 8382d377bd AP_HAL_ChibiOS: Add a BUFSIZ value 2018-10-09 10:08:52 +11:00
Michael du Breuil 9a48a0835e AP_HAL_ChibiOS: Don't redefine errno 2018-10-03 08:01:13 +10:00
Michael du Breuil f810b7b9f6 AP_HAL_ChibiOS: Make getcwd() take size_t as per the standard 2018-10-02 06:04:40 +10:00
Michael du Breuil 7fda309d3c AP_HAL_ChibiOS: Remap unused pins to ADC 2018-09-20 01:07:47 +01:00
Siddharth Purohit 8ac38d73f7 HAL_ChibiOS: add option for NO_FASTBOOT build and enable it for iomcu 2018-09-19 12:14:15 +10:00
Siddharth Purohit 6622c9b8fd HAL_ChibiOS: wrap sscanf and snprintf methods 2018-09-19 12:14:15 +10:00
Siddharth Purohit 05539cd93b HAL_ChibiOS:remove print statement left over from previous changes 2018-09-19 12:14:15 +10:00
Siddharth Purohit 2d1153081c HAL_ChibiOS: do not build float support for bootloader builds 2018-09-19 12:14:15 +10:00
Siddharth Purohit f9149f45b2 HAL_ChibiOS: explicitly mention if RTC not available 2018-09-19 12:14:15 +10:00
Siddharth Purohit 22f74b0827 HAL_ChibiOS: add option to set iomcu firmware environment var 2018-09-19 12:14:15 +10:00
Siddharth Purohit 42b4730d88 HAL_ChibiOS: add changes to hwdef to support STM32F1 based controller 2018-09-19 12:14:15 +10:00
Siddharth Purohit e824a9c360 HAL_ChibiOS: add hwdef files to support IOMCU 2018-09-19 12:14:15 +10:00
s0up 066cf90111 HAL_ChibiOS: Add speedybee hardware definition 2018-09-07 08:33:35 +10:00
Paul Atkin bb99165221 HAL_ChibiOS: updates for KakuteF7 
fixed PWM and added full tonealarm support
 2018-09-06 10:11:34 +10:00
Andrew Tridgell 33076be585 HAL_ChibiOS: fixed handling of 16 bit timers 
when we have a 16 bit timer then systime_t is 16 bit, and we need to
handle wrap of get_systime_us32()
 2018-08-26 18:34:26 +10:00
Andrew Tridgell db9a8f16ed HAL_ChibiOS: enable terrain on Pixracer, minpx-v2 and mini-pix 2018-08-24 19:43:27 +10:00
Andrew Tridgell 5526dac4fc HAL_ChibiOS: probe all i2c baros for revo-mini 
this ensures we build this functionality in CI
 2018-08-23 13:29:59 +10:00
Andrew Tridgell d3af854949 HAL_ChibiOS: fixed bootloader build 2018-08-16 12:40:10 +10:00
Andrew Tridgell dabdb969f6 HAL_ChibiOS: added support for HAL_Semaphore type 2018-08-16 12:40:10 +10:00
Alexander Malishev 05099b8b8b HAL_ChibiOS: restore default dataflash buffer size 
This fix log corruption in copter
 2018-08-15 10:15:09 +10:00
mirkix c33b692f53 AP_HAL_ChibiOS: fix CubeYellow build 2018-08-14 06:26:22 +10:00
Andrew Tridgell 385f735799 HAL_ChibiOS: avoid 64 bit maths in AP_HAL::micros() 
this saves a few cycles
 2018-08-08 21:24:49 +10:00
vierfuffzig bc52d430f9 Chibios add bootloader for mini-pix 2018-08-07 07:09:39 +10:00
utkinpol 2912e732b4 HAL_ChibiOS: updated for KakuteF7 2018-08-04 08:24:49 +10:00
Andrew Tridgell 4e6ac85057 HAL_ChibiOS: use 32 bit time intervals 
this makes for smaller and faster code. We really don't need 64 bit
intervals as long sleeps are done with a loop.
 2018-08-03 13:44:59 +10:00
Andrew Tridgell 1bd0ea079b HAL_ChibiOS: fixed build on older compilers 
allow build with gcc 4.9.x
 2018-08-03 13:44:59 +10:00
Andrew Tridgell 7aba99e229 HAL_ChibiOS: fixes for ChibiOS version update 2018-08-03 13:44:59 +10:00
Andrew Tridgell f8e2edbc7f HAL_ChibiOS: fixed cache flush for updated ChibiOS version 2018-08-03 13:44:59 +10:00
Siddharth Purohit 2604b00b43 HAL_ChibiOS: use ch.h header for oslib api 2018-08-03 13:44:59 +10:00
Siddharth Purohit ff65487ab3 HAL_ChibiOS: follow updated gpio pin setup procedure 2018-08-03 13:44:59 +10:00
Siddharth Purohit 5f88163e17 HAL_ChibiOS: update configuration and rtlib headers for ChibiOS 18.x.x 2018-08-03 13:44:59 +10:00
Siddharth Purohit 395c48933c HAL_ChibiOS: move tto using updated time conversion API 2018-08-03 13:44:59 +10:00
Siddharth Purohit 4e8d072d6d HAL_ChibiOS: move to using recent pal driver api for GPIO IRQ events 2018-08-03 13:44:59 +10:00
Mark Whitehorn 86b7adf68f AP_HAL_Chibios: fix fmuv3/hwdef.dat printf/STDOUT description and clean up 2018-08-03 13:08:37 +10:00
Lucas De Marchi 20778f73f1 AP_HAL_ChibiOS: define HAL_HAVE_SAFETY_SWITCH accordingly 2018-08-02 13:15:02 -07:00
Andrew Tridgell b0badf8caf HAL_ChibiOS: fixes for F745 builds 2018-08-02 11:56:33 +10:00
Andrew Tridgell 44fd85ff29 HAL_ChibiOS: reduce memory used by serial buffers 
this does not appear to affect log download speed. It saves about 27k
of memory
 2018-08-01 13:11:16 +10:00
Hwurzburg 19f44f80ad HAL_ChibiOS: Added Omnibus F4 NanoV6 (only V6) 
bench tested all ports
 2018-07-30 19:32:29 +10:00
Andrew Tridgell 4026b9f49d HAL_ChibiOS: probe all external compasses on mini-pix 2018-07-30 17:26:19 +10:00
Andrew Tridgell 72ee20c590 HAL_ChibiOS: added RC input for OMNIBUSF7V2 2018-07-30 10:45:55 +10:00
Timothy Knab d4c19ebc3c HAL_ChibiOS: Updated OMNIBUSF7V2 
Compasses on the I2C bus are now detected properly and GPS on UART3 works.
 2018-07-30 10:45:55 +10:00
Andrew Tridgell 95aaa01014 HAL_ChibiOS: override COMPASS_AUTO_ROT on several boards 2018-07-28 18:05:12 +10:00
Andrew Tridgell 2174c53eb6 HAL_ChibiOS: added Pixhawk1 build target 
this is more obvious to users than fmuv3
 2018-07-27 10:02:31 +10:00
Alexander Malishev 1377943eb3 HAL_ChibiOS: fix DTCM size in stm32f745 mcu 2018-07-26 17:52:37 +10:00
Andrew Tridgell 8a26ca1ddf HAL_ChibiOS: added a DMA reserve heap 
this ensures we keep some DMA-capable memory aside for when it is
needed
 2018-07-20 15:48:21 +10:00
Andrew Tridgell ec97e7772d HAL_ChibiOS: rename f4by-ch to F4BY 2018-07-18 21:24:11 +10:00
Alexander Malishev f265d7e128 AP_Bootloader: add f4by bootloader 2018-07-18 21:10:39 +10:00
Andrew Tridgell caa553e727 HAL_ChibiOS: fixed internal i2c mask for Pixracer 2018-07-18 12:04:01 +10:00
Alexander Malishev 4342dae065 HAL_ChibiOS: define BOARD_RSSI_ANA_PIN to simpify tuning 2018-07-16 08:29:49 +10:00
Alexander Malishev e04f438ce3 HAL_ChibiOS: fix analog pins on MatekF405 2018-07-16 08:29:49 +10:00
Alexander Malishev 89f7d652e0 HAL_ChibiOS: removed wrong led pin 2018-07-16 08:29:49 +10:00
Andrew Tridgell 9ab55f6838 HAL_ChibiOS: probe for external compasses on several boards 
boards that have no internal compass will now probe for all external
compass types
 2018-07-14 17:51:50 +10:00
Andrew Tridgell 7eabee04a3 HAL_ChibiOS: enable OSD on KakuteF7 2018-07-13 14:53:53 +10:00
Andrew Tridgell b96f24c80e HAL_ChibiOS: added KakuteF7 
thanks to Huibean for the fixes!
 2018-07-13 14:53:53 +10:00
Andrew Tridgell f2d602690e HAL_ChibiOS: fixed build error with some compilers 2018-07-13 08:50:46 +10:00
Andrew Tridgell 0201893f7c HAL_ChibiOS: fixed peripheral power-up on fmuv5 
we need to do the powerup before we initialise the UARTs
 2018-07-13 07:34:30 +10:00
Andrew Tridgell 409e857f6b HAL_ChibiOS: use pullup on CTS line 
this makes life less difficult for SiK radios which go into bootloader
mode on low CTS
 2018-07-13 07:34:30 +10:00
Andrew Tridgell 11e09a846c HAL_ChibiOS: setup RTS pins as pullup 
this prevents RTS pins from keeping SiK radios in bootloader mode on
peripheral powerup
 2018-07-13 07:34:30 +10:00
Andrew Tridgell 63a0a4979c HAL_ChibiOS: delay peripheral power on for fmuv5 
this should prevent SiK radios staying in the bootloader
 2018-07-13 07:34:30 +10:00
Andrew Tridgell f083b80700 HAL_ChibiOS: added preallocation of DMA bouncebuffers 
we need 512 bytes for microSD
 2018-07-12 14:34:04 +10:00
Andrew Tridgell f84424cca4 HAL_ChibiOS: added specific builds for the Pixracer and mRoX21 boards 2018-07-12 12:33:32 +10:00
Andrew Tridgell 721f5d86b1 HAL_ChibiOS: fixed mRoX21 IMU setup 2018-07-12 12:33:32 +10:00
Andrew Tridgell 0310bd468c HAL_ChibiOS: changed uart order for KakuteF4 
thanks to feedback from Arther
 2018-07-12 11:50:10 +10:00
fnoop 374c46bd57 HAL_ChibiOS: MatekF405-Wing UART reorder 2018-07-11 16:26:04 -07:00
fnoop 922a9762df HAL_ChibiOS: Fix MatekF405-Wing default compass rotation 2018-07-11 10:10:34 +10:00
Andrew Tridgell 2d8dbc05d0 HAL_ChibiOS: fixed omnibusf4pro I2C 
many thanks to Kelly-Foster and @sh83
 2018-07-11 08:33:49 +10:00
Andrew Tridgell ece10082e2 HAL_ChibiOS: added separate builds for Pixhawk4 and CUAVv5 
this makes it easier to distinguish boards in logs, plus makes life
easier when the user is selecting the right firmware.

It also gives us the flexibility to make parameter changes as needed
 2018-07-10 18:29:14 +10:00
Andrew Tridgell b647dde28f HAL_ChibiOS: changed which I2C bus is internal on fmuv5 
match PH4 arrangement
 2018-07-10 18:29:14 +10:00
Andrew Tridgell 385713abdd HAL_ChibiOS: support for PH4-mini board 2018-07-10 18:29:14 +10:00
Andrew Tridgell 63a9b903ba HAL_ChibiOS: added fallback to microSD for param storage 
useful for boards without flash sectors setup in bootloader for
storage, but can use microSD
 2018-07-10 15:41:44 +10:00
Randy Mackay af6c5ebda1 AP_HAL_ChibiOS: reduce default BRD_PWM_COUNT to 4 for fmv3 
also default relay pins to use aux out 5 and 6
 2018-07-10 05:30:05 +10:00
Andrew Tridgell a7d9f4eef7 HAL_ChibiOS: don't add defaults.parm when building bootloader 2018-07-09 20:59:51 +10:00
Andrew Tridgell fd02865a8b HAL_ChibiOS: use wildcard ROMFS name for fonts 2018-07-09 19:41:56 +10:00
Andrew Tridgell 847cb760b4 HAL_ChibiOS: fixed fmuv4-beta hwdef for dup pin 2018-07-06 10:21:12 +10:00
Andrew Tridgell bf6906819d HAL_ChibiOS: fixed configure of cube-red 2018-07-06 10:21:12 +10:00
Alexander Malishev 7a3eb69818 HAL_ChibiOS: allow arm without compass on omnibusf4pro 2018-07-06 09:04:50 +10:00
Andrew Tridgell 840362f355 HAL_ChibiOS: fixed default revo compass orientation 2018-07-05 19:43:12 +10:00
Andrew Tridgell 15ee9593b5 HAL_ChibiOS: fixed duplicate pin definitions 
thanks to @liang-tang for noticing
 2018-07-05 12:07:55 +10:00
Andrew Tridgell 53dcf5bef8 HAL_ChibiOS: fixed build warning with MATEKF405 2018-07-05 11:48:40 +10:00
Andrew Tridgell 5c2c5efc35 HAL_ChibiOS: rename to CubeYellow 2018-07-05 07:53:48 +10:00
Andrew Tridgell f289c71b89 HAL_ChibiOS: make CubeOrange IDs consistent with CubeBlack 2018-07-05 07:53:48 +10:00
Andrew Tridgell 47fec1859b HAL_ChibiOS: rename cube-orange to CubeOrange 2018-07-05 07:53:48 +10:00
proficnc 5519986848 HAL_ChibiOS: Added CubeBlack hwdef 2018-07-05 07:53:48 +10:00
Andrew Tridgell d3bc281a10 HAL_ChibiOS: use generic ROMFS embedding system 2018-07-02 10:43:48 +10:00
Andrew Tridgell 8ba137bd9a waf: moved ROMFS embed script into waf folder 2018-07-02 10:43:48 +10:00
Andrew Tridgell ca3beb88b7 HAL_ChibiOS: allow for telem1 and telem2 for bootloader on fmuv3 2018-06-29 08:17:38 +10:00
Andrew Tridgell 6cf205bdbe HAL_ChibiOS: make sure we populate up to uartG 2018-06-29 08:17:38 +10:00
Andrew Tridgell dd059b89f3 HAL_ChibiOS: added uartG for fmuv4 and fmuv5 2018-06-29 08:17:38 +10:00
Andrew Tridgell 963675689c HAL_ChibiOS: fixed substitution of %BOARD%-BL 2018-06-28 11:35:13 +10:00
Andrew Tridgell 54dc67e2a9 HAL_ChibiOS: default bootloader product string to XX-BL 2018-06-28 11:35:13 +10:00
Andrew Tridgell 946d0208e5 HAL_ChibiOS: fixed stm32f7 cache bug in erase flash page 2018-06-28 11:35:13 +10:00
Andrew Tridgell d183efa720 HAL_ChibiOS: fixed USB string of fmuv5 bootloader 2018-06-28 11:35:13 +10:00
Andrew Tridgell 2b7b499c63 HAL_ChibiOS: added support for RTC sig for fast boot 2018-06-28 11:35:13 +10:00
Andrew Tridgell f7f9d2b0e7 HAL_ChibiOS: added fmuv4 bootloader hwdef-bl.dat 2018-06-28 11:35:13 +10:00
Andrew Tridgell 3a5b3b4b1b HAL_ChibiOS: fixed adding bootloader to ROMFS 2018-06-28 11:35:13 +10:00
Peter Barker e332bece0f AP_HAL_ChibiOS: embed any bootloader found for a board 2018-06-28 11:35:13 +10:00
Peter Barker a81b3c8a7c AP_HAL_ChibiOS: specify bootloader for sparky2 2018-06-28 11:35:13 +10:00
Andrew Tridgell 10533fb249 HAL_ChibiOS: enable OSD font on OMNIBUSF7V2 2018-06-27 14:55:00 +10:00
Alexander Malishev 79b289f97e HAL_ChibiOS: reverted change in omnibus hwdef.dat 2018-06-27 14:55:00 +10:00
Andrew Tridgell 8e8508a9f3 HAL_ChibiOS: enable OSD for MatekF405 2018-06-27 14:55:00 +10:00
Andrew Tridgell cf19e7a3ae HAL_ChibiOS: enabled OSD on KakuteF4 2018-06-27 14:55:00 +10:00
Alexander Malishev 8ce7ef1342 HAL_ChibiOS: added OSD support for MatekF405 and Omnibuspro 2018-06-27 14:55:00 +10:00
Andrew Tridgell 35f835a021 HAL_ChibiOS: improved OMNIBUSF7V2 support 2018-06-27 13:01:30 +10:00
Andrew Tridgell 7cce23671a HAL_CbibiOS: removed unnecessary BOARD_SUBTYPE define 
just causes build warnings
 2018-06-27 11:37:45 +10:00
Andrew Tridgell bf6fb72904 HAL_ChibiOS: fixed 32 bit flash writes 2018-06-25 21:22:31 +10:00
Andrew Tridgell f71d2a7417 HAL_ChibiOS: support bootloaders with no uarts 2018-06-25 21:22:31 +10:00
Andrew Tridgell 277836ccc7 HAL_ChibiOS: added bootloader definition for fmuv3 
including UART support on 2 UARTs
 2018-06-25 21:22:31 +10:00
Andrew Tridgell e40457d98f HAL_ChibiOS: avoid malloc in usbcfg 
this avoids the need for malloc in the bootloader
 2018-06-25 21:22:31 +10:00
Andrew Tridgell 369ac5edd0 HAL_ChibiOS: save more space in the bootloader 2018-06-25 21:22:31 +10:00
Andrew Tridgell e870b5f00a HAL_ChibiOS: use 32 bit flash operations when possible 2018-06-25 21:22:31 +10:00
Andrew Tridgell feefa05b41 HAL_ChibiOS: expose stm32_flash_ispageerased() 2018-06-25 21:22:31 +10:00
Andrew Tridgell dd1bd43a2e HAL_ChibiOS: added stm32_flash_keep_unlocked() 2018-06-25 21:22:31 +10:00
Alexander Malishev cfa18b8e70 HAL_ChibiOS: reduce dataflash buffer size on targets with 128KB ram 2018-06-25 17:43:26 +10:00
Andrew Tridgell dc0f2f9319 HAL_ChibiOS: use USB for stdout on more boards 
don't waste a UART
 2018-06-24 08:26:28 +10:00
Andrew Tridgell 2cfdc98453 HAL_ChibiOS: fixed omnibusf4pro bootloader LED pins 2018-06-24 08:26:28 +10:00
Andrew Tridgell b149089830 HAL_ChibiOS: fixed board IDs and added more bootloaders 2018-06-24 08:26:28 +10:00
Andrew Tridgell 2f8a534243 HAL_ChibiOS: expand param storage on F4 boards with flash storage 
this allows for a lot more param space on these boards
 2018-06-24 08:26:28 +10:00
Andrew Tridgell e868a4fe8b HAL_ChibiOS: set FLASH_RESERVE_START_KB in the environment 
used to correctly setup an intel hex file
 2018-06-23 17:06:38 +10:00
Andrew Tridgell 1c807e0078 HAL_ChibiOS: added option to limit size of bootloader 
this will ensure our F4 bootloaders stay under 16k
 2018-06-23 17:06:38 +10:00
Andrew Tridgell d88b710ea9 HAL_ChibiOS: added more bootloader hwdef-bl.dat files 2018-06-22 08:00:31 +10:00
Andrew Tridgell 518d41e0d4 HAL_ChibiOS: added OTP defines 2018-06-22 08:00:31 +10:00
Kelly-Foster ae84202bf2 HAL_ChibiOS: added MatekF405-Wing hwdef.dat 2018-06-22 08:00:31 +10:00
Andrew Tridgell 14f66461a7 HAL_ChibiOS: shrink build size for bootloader 
thanks to @sh83 for the idea
 2018-06-22 08:00:31 +10:00
Alexander Malishev 661259de4e HAL_ChibiOS: reduce .text aigment to save flash space 2018-06-22 08:00:31 +10:00
Andrew Tridgell 608490f5ae HAL_ChibiOS: fixed cube-orange bl build 2018-06-22 08:00:31 +10:00
Andrew Tridgell f9faa0765d HAL_ChibiOS: fixed bootloader IDs 2018-06-22 08:00:31 +10:00
Andrew Tridgell 3fc6824bfb HAL_ChibiOS: setup more bootloader config files 2018-06-22 08:00:31 +10:00
Andrew Tridgell 0cd46c063c HAL_ChibiOS: fixed flash driver for F7 
we need a data sync barrier due to the F7 cache
 2018-06-22 08:00:31 +10:00
Andrew Tridgell 82428dfbc6 HAL_ChibiOS: added f405-bl hwdef.dat 2018-06-22 08:00:31 +10:00
Andrew Tridgell 3ef88e1b8f HAL_ChibiOS: allow flash support for bootloader 2018-06-22 08:00:31 +10:00
Andrew Tridgell 5216870492 HAL_ChibiOS: avoid strstr in usbcfg 
saves nearly 2k of flash
 2018-06-22 08:00:31 +10:00
Andrew Tridgell c12d14d7a4 HAL_ChibiOS: check for ChibiOS features 2018-06-22 08:00:31 +10:00
Andrew Tridgell 03f67d82c9 HAL_ChibiOS: allow more ChibiOS functionality to be disabled 
used by bootloader builds for minimal flash size
 2018-06-22 08:00:31 +10:00
Andrew Tridgell e3a23921a2 HAL_ChibiOS: fixed FLASH_LOAD_ADDRESS 
needs 0x08000000 base
 2018-06-22 08:00:31 +10:00
Andrew Tridgell 1c054f0e4a HAL_ChibiOS: fixed clock line on fmuv5 I2C4 
there was a typo in the datasheet
 2018-06-21 13:08:20 +10:00
Andrew Tridgell a8f99882ba HAL_ChibiOS: allow FrSky_INV to be controlled as GPIO 
this allows control via relay settings
 2018-06-21 07:40:50 +10:00
Hyungsub 8ae2729022 AP_HAL_ChibiOS: fix memory leaks 
Fixes #8644
 2018-06-18 10:30:56 +01:00
Andrew Tridgell 1c4bf3d804 HAL_ChibiOS: fixed build warning 2018-06-15 11:26:40 +10:00
Lucas De Marchi 46213eb97e chibios_hwdef: fix wrong uart index 
calling uart_list.index() will find the first element with that name,
which is not really what we want when we have multiple EMPTY uarts.
 2018-06-15 08:21:40 +10:00
Andrew Tridgell 00d919018b HAL_ChibiOS: added RTC clock implementation 2018-06-15 08:01:22 +10:00
Andrew Tridgell 10ca1e78e8 HAL_ChibiOS: switched to Mode3 on SPI1 
this is now working correctly
 2018-06-13 20:05:26 +10:00
Andrew Tridgell 9d248456e4 HAL_ChibiOS: re-enable I2C4 DMA for F765 
now we have fixed the error from the datasheet we can do DMA
 2018-06-13 20:05:26 +10:00
Andrew Tridgell ad3eca4e6b HAL_ChibiOS: fixed I2C4 DMA streams 
There is an error in the datasheet. See
https://community.st.com/thread/50484-documentation-error-on-dma-channels-for-i2c4-on-stm32f7
 2018-06-13 20:05:26 +10:00
Andrew Tridgell 62e8fbb9d3 HAL_ChibiOS: fixed OMNIBUSF7V2 hwdef.dat 2018-06-13 20:05:26 +10:00
Andrew Tridgell e068106669 HAL_ChibiOS: support I2C devices on STM32F7 without DMA 
this allows us to support I2C4 on fmuv5
 2018-06-13 20:05:26 +10:00
Alexander Malishev 289b93c3d0 HAL_ChibiOS: added parse_timer to chibios_hwdef.dat 2018-06-11 18:32:17 +10:00
Andrew Tridgell ab946b5d76 HAL_ChibiOS: disable debug code for FMUv5 2018-06-08 09:56:41 +10:00
Philip 2424e38ed2 HAL_ChibiOS: Update cube-orange hwdef.dat for USB IDs 2018-06-08 09:56:41 +10:00
Andrew Tridgell 058e83c180 HAL_ChibiOS: switched cube-orange SPI1 devices to Mode0 2018-06-08 09:56:41 +10:00
Andrew Tridgell 2df0a71a4b HAL_ChibiOS: fixed flash load address in hwdef.h 2018-06-08 09:56:41 +10:00
Andrew Tridgell 3a7c1b4d42 HAL_ChibiOS: switch BMI055 to mode0 on fmuv5 2018-06-08 09:56:41 +10:00
Andrew Tridgell 3be9077ba9 HAL_ChibiOS: added FMUv5 FMU capture pins 2018-06-06 15:01:38 +10:00
Andrew Tridgell c05086430d HAL_ChibiOS: fixed hwdef.h generation for PWM on tim12 2018-06-06 15:01:38 +10:00
Andrew Tridgell 63087b6425 HAL_ChibiOS: enable fmu out 7 and 8 for fmuv5 
these are exposed on the Pixhawk4
 2018-06-06 15:01:38 +10:00
Alexander Malishev eac5d13f1c HAL_ChibiOS: use 2 channels in SoftSigReaderInt.cpp 2018-06-06 08:23:51 +10:00
Alexander Malishev fd45b3a69b HAL_ChibiOS: slightly increase EICU interrupt priority 2018-06-06 08:23:51 +10:00
Alexander Malishev 73d33356ad HAL_ChibiOS: detect overcapture in SoftSigReaderInt.cpp 2018-06-06 08:23:51 +10:00
Andrew Tridgell 7a1f87eb52 HAL_ChibiOS: added cube-orange hwdef 2018-06-06 08:13:38 +10:00
Andrew Tridgell 1ed6a9d34b HAL_ChibiOS: added MCU tables for STM32F777 2018-06-06 07:15:41 +10:00
Andrew Tridgell d1caa86e12 HAL_ChibiOS: adjust DMA priorities for fmuv3 2018-06-06 07:15:41 +10:00
Andrew Tridgell c273b23940 HAL_ChibiOS: moved MCU config to python database 
this moves the key MCU config variables related to memory to the
python MCU database, allowing the hwdef.dat to be considerably simpler
 2018-06-06 07:15:41 +10:00
Andrew Tridgell a1c97d0585 HAL_ChibiOS: disable paranoid checks for fmuv5 2018-06-06 07:15:41 +10:00
Andrew Tridgell 0e09dc75c0 HAL_ChibiOS: flush all memory on chSysHalt() 
this makes debugging a lot easier, as gdb can see the values in dcache
 2018-06-06 07:15:41 +10:00
Andrew Tridgell 2493cdbcb6 HAL_ChibiOS: switch to new bouncebuffer system 
this removes the dma_flush and dma_invalidate methods and uses a
common bouncebuffer system for all CPU types. This enables microSD
support on STM32F7
 2018-06-06 07:15:41 +10:00
Andrew Tridgell 0b1e26a470 HAL_ChibiOS: added bouncebuffer system 
this makes our bouncebuffers available for ChibiOS system
drivers. This is needed for SDMMCv1 on STM32F7
 2018-06-06 07:15:41 +10:00
Andrew Tridgell 56ce3f057d HAL_ChibiOS: added DRDY and SDMMC pins for FMUv5 2018-06-06 07:15:41 +10:00
Andrew Tridgell 018c9ad40b HAL_ChibiOS: fixed build warnings 2018-06-06 07:15:41 +10:00
Andrew Tridgell eec4a12cc2 HAL_ChibiOS: switched to using DTCM memory for DMA 
this uses SRAM1 and SRAM2 for main memory, which enables the use of the
data cache for faster operation, and using DTCM for all DMA operations.
 2018-06-06 07:15:41 +10:00
Andrew Tridgell bb2e7a189f HAL_ChibiOS: added a debug function for showing stack free 
this can be enabled when needed to investigate stack space remaining
 2018-06-06 07:15:41 +10:00
Andrew Tridgell 010cd71ab6 HAL_ChibiOS: enable CAN on FMUv5 
and fixed voltage scaling defaults
 2018-06-06 07:15:41 +10:00
Andrew Tridgell 2087354939 HAL_ChibiOS: align buffers to STM32F7 cache lines 
this allows for DMA flush and invalidate operations to work on all
dynamically allocated memory
 2018-06-06 07:15:41 +10:00
Andrew Tridgell 762e4f9915 HAL_ChibiOS: fixed dma priorities for fmuv5 2018-06-06 07:15:41 +10:00
Andrew Tridgell 77d95f6744 HAL_ChibiOS: fmuv5 tweaks 2018-06-06 07:15:41 +10:00
Andrew Tridgell edb831653f HAL_ChibiOS: added dma_flush and dma_invalidate operations 
these are needed to manage the data cache on the STM32F7
 2018-06-06 07:15:41 +10:00
Andrew Tridgell 7449e15313 HAL_ChibiOS: disable flash storage option on FMUv5 
F7 flash driver not working yet
 2018-06-06 07:15:41 +10:00
Andrew Tridgell 2d8748ddce HAL_ChibiOS: enable ADCs and buzzer for fmuv5 2018-06-06 07:15:41 +10:00
Andrew Tridgell 6aab9232ef HAL_ChibiOS: enable aux pwm channels on FMUv5 2018-06-06 07:15:41 +10:00
Andrew Tridgell db9bf19e46 HAL_ChibiOS: enable i2c for FMUv5 2018-06-06 07:15:41 +10:00
Andrew Tridgell 77bb69fa2e HAL_ChibiOS: enabled UARTs for FMUv5 2018-06-06 07:15:41 +10:00
Andrew Tridgell ac44189ab2 HAL_ChibiOS: setup two IMUs for FMUv5 2018-06-06 07:15:41 +10:00
Andrew Tridgell 721f3cd5d1 HAL_ChibiOS: fixed flash layout for F7 
thanks to @alielectric
 2018-06-06 07:15:41 +10:00
Andrew Tridgell 01f5d1a17c HAL_ChibiOS: first IMU working 2018-06-06 07:15:41 +10:00
Andrew Tridgell 4ad757b4d1 HAL_ChibiOS: fixed pincount for F7 2018-06-06 07:15:41 +10:00
Andrew Tridgell 876899c48d HAL_ChibiOS: baro and FRAM working for fmuv5 2018-06-06 07:15:41 +10:00
Andrew Tridgell 8d2f57898b HAL_ChibiOS: adjust pin counts for STM32F7 2018-06-06 07:15:41 +10:00
Andrew Tridgell 1f6ffc48e5 HAL_ChibiOS: allow STM32F7 to build with flash driver 2018-06-06 07:15:41 +10:00
Andrew Tridgell 7c09a1781b HAL_ChibiOS: started on fmuv5 2018-06-06 07:15:41 +10:00
Andrew Tridgell a011561a6a HAL_ChibiOS: support sdcard on MatekF405 2018-05-27 19:10:24 +10:00
Andrew Tridgell 2c55589488 HAL_ChibiOS: added hwdef for MatekF405 2018-05-27 19:10:24 +10:00
Alexander Malishev 83e65b3c6e HAL_ChibiOS: turn on sdcard on f4by 2018-05-27 19:10:24 +10:00
Alexander Malishev 66de6d770a HAL_ChibiOS: Enable reentrancy on FatFS sybsystem 2018-05-27 19:10:24 +10:00
Alexander Malishev 6b15b2f44f HAL_ChibiOS: Enable sdcard on spi bus 2018-05-27 19:10:24 +10:00
Andrew Tridgell 7b720aae46 HAL_ChibiOS: allow printf() to work on systems without debug console 
map to hal.console once initialised
 2018-05-26 19:06:25 +10:00
Michael du Breuil 3a62bca7d0 AP_HAL_ChibiOS: Make redefined pins an error, fix FMUv3 2018-05-25 09:57:18 +10:00
Andrew Tridgell 8571e59d85 HAL_ChibiOS: fixed SBUS inversion for KakuteF4 2018-05-20 15:50:44 +10:00
Alexander Malishev 7eb08bbd40 HAL_ChibiOS: Fix inverter on Omnibus F4 V3 2018-05-14 06:06:40 +10:00
mirkix 34c96c80ff AP_HAL_ChibiOS: rename BUZZER_PIN into HAL_BUZZER_PIN 2018-05-10 17:48:25 +01:00
anbello 5b56887428 Changes to be committed: 
modified:   hwdef.dat

Modified as per @sh83 hints
 2018-05-08 07:33:19 +10:00
anbello 93f551e56e define for AirbotF4 board (ChibiOS HAL) 
modified:   libraries/AP_HAL/AP_HAL_Boards.h
	new file:   libraries/AP_HAL_ChibiOS/hwdef/airbotf4/hwdef.dat
 2018-05-08 07:33:19 +10:00
Andrew Tridgell 2684f46641 HAL_ChibiOS: fixed IMU orientation for revo-mini 2018-04-30 08:33:39 +10:00
Alexander Malishev 1fd52c4e01 HAL_ChibiOS: added input capture filter 2018-04-28 07:31:58 +10:00
Alexander Malishev 0d6043e0c6 HAL_ChibiOS: Fixed current and voltage sense on OmnibusF4PRO 2018-04-26 07:57:06 +10:00
Andrew Tridgell bba8d506d6 HAL_ChibiOS: port for kakutef4 flight board 2018-04-24 08:03:46 +10:00
Andrew Tridgell 95108a2d2c HAL_ChibiOS: added support for 16 bit timers 2018-04-24 08:03:46 +10:00
Alexander Malishev 03d88b01be HAL_ChibiOS: added support for interrupt based rcin parsing 2018-04-24 08:03:46 +10:00
malcolm churn 7718196838 HAL_ChibiOS: Fix sparky2 target. 
Correct pin mappings, ADC, PWM.

Not working
Flash memory, Logging, external i2c tested with NXP MAG3110.
 2018-04-22 21:01:14 +10:00
Andrew Tridgell bb0cbd15a4 HAL_ChibiOS: implement fmuv4 safety state 
and added safety_mask and safety_pwm support for both fmuv3 and fmuv4
 2018-04-17 10:14:01 +10:00
Andrew Tridgell 77c922e6b8 HAL_ChibiOS: make embed.py work with python3 2018-04-17 08:44:44 +10:00
Andrew Tridgell 3749480dd8 HAL_ChibiOS: create ap_romfs_embedded.h 
use ROMFS keywork for romfs files
 2018-04-17 08:44:44 +10:00
Alexey Kozin f87cc4e172 f4by chibios new style dma table build fix 2018-04-16 07:50:34 +10:00
mirkix a9449ccd29 AP_HAL_ChibiOS: add f767-min board support 2018-04-15 07:40:46 +10:00
kozinalexey 2316fee279 HAL_ChibiOS: f4by conf2 fixed ram size, ext compass, pwm count 2018-04-14 11:09:34 +10:00
Alexander Malishev ca33ff04d9 ChibiOS: add support for omnibusf4pro board 2018-04-14 09:25:15 +10:00
Alexander Malishev 79b5719419 ChibiOS: add support for complementry output timer channels 2018-04-14 09:25:15 +10:00
Alexander Malishev 1b7eecdf2f ChibiOS: fixed tables for F405 mcu 2018-04-14 09:25:15 +10:00
mirkix 8074361bb8 AP_HAL_ChibiOS: add hardware def for STM32F767xx 2018-04-12 14:19:40 +10:00
Andrew Tridgell c6d7691667 HAL_ChibiOS: fixed F745 database for new DMA system 2018-04-12 11:50:44 +10:00
Andrew Tridgell 7286ffab77 HAL_ChibiOS: define FLASH_LOAD_ADDRESS in hwdef.h 
used for bootloader support
 2018-04-12 11:50:44 +10:00
Andrew Tridgell e4ce2f532b HAL_ChibiOS: make smaller builds possible 
this allows for much smaller builds when you disable a lot of
options. This is part of an effort to create a bootloader of less than
16k using ChibiOS
 2018-04-12 11:50:44 +10:00
Andrew Tridgell ef9d9d9c26 HAL_ChibiOS: first boot of OMNIBUSF7V2 
only the 20608 works, and it has lots of errors.
The bmp280 is detected, but does not give good data
no UARTs yet
 2018-04-12 11:50:44 +10:00
Andrew Tridgell 02f20b4114 HAL_ChibiOS: first version of OMNIBUSF7V2 board support 
first F7 based board
 2018-04-12 11:50:44 +10:00
Andrew Tridgell a9edbb6b2d HAL_ChibiOS: allow for a defaults.parm file in hwdef directory 
this keeps defaults with the board, where that is appropriate
 2018-04-12 11:50:44 +10:00
Andrew Tridgell 6e5cbc7c3d HAL_ChibiOS: initial support for F745 boards 2018-04-12 11:50:44 +10:00
Andrew Tridgell 551dca63e1 HAL_ChibiOS: added build information for each MCU 
this abstracts the build information for each MCU, so that hwdef.dat
can control the build process of ChibiOS
 2018-04-12 11:50:44 +10:00
Andrew Tridgell d1e4185817 HAL_ChibiOS: don't build flash.c if not needed 2018-04-12 11:50:44 +10:00
Andrew Tridgell cdbbceb6b6 HAL_ChibiOS: cope with SDMMC peripheral for microSD 2018-04-12 11:50:44 +10:00
Andrew Tridgell 751024f483 HAL_ChibiOS: mark two skyviper builds as needing abin files 2018-04-11 15:09:49 +10:00
Andrew Tridgell f2df171fdd HAL_ChibiOS: fixed DSM input on fmuv4 2018-04-10 17:22:21 +10:00
Andrew Tridgell b4aeffbaed HAL_ChibiOS: added power status flags reporting 2018-04-09 15:32:04 +10:00
Andrew Tridgell 7c85d06600 HAL_ChibiOS: setup pwm counts, and cleanup mindpx-v2 PWM lines 2018-04-09 15:32:04 +10:00
Andrew Tridgell 9b22e0b7cc HAL_ChibiOS: fixed SPI rates on fmuv3 
this fixes a SPI bandwidth issue on PH2.1 with 3 IMUs active
 2018-04-07 09:10:29 +10:00
Andrew Tridgell 751c3a554a HAL_ChibiOS: added fmuv4-beta hardware definition 
for an old pixracer quad I have (and I believe Peter has one too)
 2018-04-07 09:10:29 +10:00
Andrew Tridgell 692f22c17f HAL_ChibiOS: added GPIO assignments for revo-mini 2018-04-07 09:10:29 +10:00
Andrew Tridgell 67bae2669b HAL_ChibiOS: enable serial5 on fmuv3 2018-04-07 09:10:29 +10:00
Andrew Tridgell 382772d999 HAL_ChibiOS: initial support for ESC serial output 2018-04-07 09:10:29 +10:00
Andrew Tridgell 93111dc0b1 HAL_ChibiOS: ensure that IO UART gets DMA 2018-04-07 09:10:29 +10:00
Andrew Tridgell 95a261e061 HAL_ChibiOS: don't generate DMA channels for ALARM pin 2018-04-07 09:10:29 +10:00
Andrew Tridgell 610a6a6c88 HAL_ChibiOS: optimise USB config driver 2018-04-07 09:10:29 +10:00
Andrew Tridgell bc32276966 HAL_ChibiOS: support DShot output 
use DMAR burst DMA to minimise number of DMA channels needed

thanks to betaflight for the great reference implementation!
 2018-04-07 09:10:29 +10:00
Andrew Tridgell 294aac6955 HAL_ChibiOS: fixed CTS pulldown 
we need to pulldown to prevent delays in uart sends
 2018-04-07 09:10:29 +10:00
Andrew Tridgell 64278f07d3 HAL_ChibiOS: removed the DMA channels from RCIN in hwdef.dat 
no longer needed as this is automatic now
 2018-04-07 09:10:29 +10:00
Andrew Tridgell 9a5df6d1f7 HAL_ChibiOS: auto-generate DMA channels for RCIN 
and add DMA channels for TIMx_UP ready for DMAR based DShot support
 2018-04-07 09:10:29 +10:00
Andrew Tridgell 6aff7ecbf5 HAL_ChibiOS: added channel numbers for STM32F4xx MCUs 2018-04-07 09:10:29 +10:00
Andrew Tridgell da2e79130b HAL_ChibiOS: generate channel numbers in DMA tables 2018-04-07 09:10:29 +10:00
Tom Pittenger b864cd6ae6 AP_HAL_ChibiOS: include correct wrappers 2018-04-03 08:27:44 +10:00
Andrew Tridgell c311599e0a HAL_ChibiOS: make DEFAULT_PARAMETERS relative to source root 2018-03-24 16:12:10 +11:00
kozinalexey 5df2b1a3ac chibios hal config for F4BY 2018-03-24 06:39:09 +11:00
Peter Barker 2efd9341cd AP_HAL_ChibiOS: copy the common linker script to outdir, use it from there 
The directory we write the linker script to might not have the correct relative path to reference this common.ld script.  So make it reference common.ld in the current directory and copy common.ld to the output directory
 2018-03-23 11:06:24 +11:00
Andrew Tridgell fd6185be0f HAL_ChibiOS: fixed python3 pickle error 2018-03-05 09:50:27 +11:00
Andrew Tridgell 961a97a8c9 HAL_ChibiOS: expand docs on STDOUT_SERIAL 2018-03-02 21:46:23 +11:00
Andrew Tridgell 0cd6c9e5fb HAL_ChibiOS: added commented block on enable debug for builds 2018-03-02 21:39:38 +11:00
Andrew Tridgell 33dd14b8d9 HAL_ChibiOS: use PULLUP on UART TX/RX lines 
this can prevent spurious bytes on disconnected pins
 2018-03-02 21:39:38 +11:00
Andrew Tridgell 08634903c8 HAL_ChibiOS: use relative path for common.ld 
this avoids a path length issue under cygwin
 2018-03-02 17:11:31 +11:00
Andrew Tridgell 153ad95398 HAL_ChibiOS: added hwdef.dat for minimal F405 and F427 boards 2018-03-02 12:52:50 +11:00
Andrew Tridgell 306d35655e HAL_ChibiOS: allow for bare board builds 
this allows for a build with no UARTs, no SPI, no I2C, no PWM. Great
for initial board bringup with just USB
 2018-03-02 12:52:50 +11:00