Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
48,168 Commits 71 Branches 509 Tags 731 MiB
Commit Graph

1713 Commits

Author SHA1 Message Date
Andrew Tridgell a9df9fe0c0 HAL_ChibiOS: removed clock tree settings in most hwdef.dat 
these are better set automatically in the headers. This simplifies the
task of doing a new port
 2020-04-28 10:32:23 +10:00
Andrew Tridgell a638196334 HAL_ChibiOS: skyviper-f412-rev1 uses a custom clock tree 2020-04-28 10:32:23 +10:00
Andrew Tridgell e8b2b52bae HAL_ChibiOS: removed STM32_VDD from hwdef.dat 
use default
 2020-04-28 10:32:23 +10:00
Andrew Tridgell d9efac2993 HAL_ChibiOS: only allow PLL override in clock selection part of header 2020-04-28 10:32:23 +10:00
Andrew Tridgell fe765b8845 HAL_ChibiOS: switched CUAV_GPS to use same clocks as other F4 2020-04-28 10:32:23 +10:00
Andrew Tridgell 82c45f6cdb HAL_ChibiOS: default STM32_VDD to 3.3V 2020-04-28 10:32:23 +10:00
Andrew Tridgell 29f538dec9 HAL_ChibiOS: use common header for STM32 clock config 
avoid the need for clock config lines in most hwdef.dat files
 2020-04-28 10:32:23 +10:00
Andrew Tridgell 3d5475a1d9 HAL_ChibiOS: fixed skyviper-journey build 2020-04-28 10:32:23 +10:00
Andrew Tridgell 7320cd3174 HAL_ChibiOS: fixed assert in wait_pin() 2020-04-27 14:01:04 +10:00
Ivannikov Kirill 3ab1b29397 AP_HAL_ChibiOS: error if system clock not 1mhz on 16 CH_CFG_ST_RESOLUTION. prevent variable overflow 
if CH_CFG_ST_FREQUENCY not match 1000000U on 16 bit CH_CFG_ST_RESOLUTION
we try to multiply now *= 1000000U/CH_CFG_ST_FREQUENCY; it may overflow 16 bit value.
 2020-04-26 19:58:54 +10:00
Andrew Tridgell d9e2a644ea HAL_ChibiOS: fixed Durandal buzzer in bootloader 
need to pull low to avoid buzzer running in bootloader
 2020-04-24 19:46:22 +10:00
bugobliterator b94f089984 HAL_ChibiOS: improve throughput of slcan router 2020-04-24 19:39:18 +10:00
Andrew Tridgell 43ac58c63b HAL_ChibiOS: added STM32CubeMX configs for H7 processor crystal varients 
useful for checking clock config changes
 2020-04-24 16:55:03 +10:00
Andrew Tridgell db642717be HAL_ChibiOS: fixed clock for FDCAN to be below 80MHz 
we were running at 100MHz, which is out of spec
 2020-04-24 16:55:03 +10:00
Andrew Tridgell 2c68ce1986 HAL_ChibiOS: fixed clock source for FDCAN 
use selected source and add 80MHz limit, as per manual and latest STM32CubeMX tool
 2020-04-24 16:55:03 +10:00
Andrew Tridgell 4ec1717361 HAL_ChibiOS: enable IMU temp control on CUAV-X7 2020-04-23 09:05:52 +10:00
Andrew Tridgell 56b0dddb7c HAL_ChibiOS: set IMU temp on CUAV-X7 2020-04-23 07:28:13 +10:00
Andrew Tridgell 5892e6421e HAL_ChibiOS: enable DRDY on ADIS16470 on CUAV-X7 2020-04-23 07:28:13 +10:00
Andrew Tridgell ffe773ff6f HAL_ChibiOS: use DRDY pin for ADIS16470 on mRoNexus 2020-04-23 07:28:13 +10:00
Andrew Tridgell 450871cde1 HAL_ChibiOS: added wait_pin() implementation 2020-04-23 07:28:13 +10:00
Andrew Tridgell 8e977183fe HAL_ChibiOS: added mRoNexus 2020-04-23 07:28:13 +10:00
Andrew Tridgell 6be519fb0d HAL_ChibiOS: added alt-config for UART4 on omnibusf4pro 2020-04-21 18:42:12 +10:00
Andy Piper f3b240533f AP_HAL_ChibiOS: eliminate EKF2 from fmuv2 build 2020-04-18 20:18:30 +10:00
Andrew Tridgell db8fdeebeb HAL_ChibiOS: fixed Hott telem half duplex handling 
this fixes an issue with single byte writes with half duplex. It isn't
an elegent solution, but nicely separates the different types of half
duplex operation
 2020-04-17 17:52:28 +10:00
Andrew Tridgell cac455ff2d HAL_ChibiOS: added another uart to omnibusf4v6 
for RC telemetry such as Hott telem
 2020-04-17 11:23:06 +10:00
vierfuffzig 7c7b199bbd AP_HAL_ChibiOS: add I2C / USART3 ALT_CONFIG for omnibusf4pro 2020-04-16 08:42:24 +10:00
Andrew Tridgell 74f33d57c5 HAL_ChibiOS: avoid unnecessary H7 flash writes 2020-04-14 10:02:51 +10:00
Andrew Tridgell 8dabd6cefc HAL_ChibiOS: expect a long delay on flash page erase 
this prevents the display of errors on flash page erase
 2020-04-14 10:02:51 +10:00
Andrew Tridgell 4b236e52b2 HAL_ChibiOS: added MatekH743 port 2020-04-14 10:02:51 +10:00
Andrew Tridgell 2165fd66f1 HAL_ChibiOS: define FLASH_RESERVE_END_KB 2020-04-14 10:02:51 +10:00
Henry Wurzburg e5319397b4 AP_HAL_ChibiOS: eliminate EKF2 from F4 builds not using HAL_MINIMIZE_FEATURES 2020-04-14 09:19:28 +10:00
murata 124d8c7fdf AP_HAL_ChibiOS: Changing the timeout detection 2020-04-14 07:32:46 +10:00
Andrew Tridgell db4f1a1473 HAL_ChibiOS: enable ADIS16470 on SPI1 2020-04-13 15:26:02 +10:00
CUAVcaijie 942b2fd29f HAL_ChibiOS: Added support for CUAV X7 flight controller 2020-04-13 15:26:02 +10:00
bugobliterator a31f2e5d90 hwdef: add validation checks for CubeOrange 2020-04-10 07:04:21 +10:00
bugobliterator ef91f1634b HAL_ChibiOS: add support for adding board validation test 2020-04-10 07:04:21 +10:00
Andrew Tridgell 376116c99b HAL_ChibiOS: fixed skyviper-journey build 2020-04-04 10:47:15 +11:00
Peter Barker 9ba2aecbb8 AP_HAL_ChibiOS: send statustext at regular intervals after watchdog reset 2020-03-31 14:30:11 +11:00
Henry Wurzburg a637073dad AP_HAL_Chibios: add tenth PWM output to MatekF405-Wing 2020-03-30 11:23:14 +11:00
Andrew Tridgell e0957c2bcc HAL_ChibiOS: include hwdef.dat in ROMFS 
this allows download via ftp
 2020-03-28 15:28:03 +11:00
Andrew Tridgell ea57b7b3cd HAL_ChibiOS: embed ROMFS files from hwdef directory 
this allows for a scripts/ directory under hwdef board directory to
embed lua scripts
 2020-03-28 15:28:03 +11:00
Andrew Tridgell 822460ce7d HAL_ChibiOS: fixed strdup() on ChibiOS 2020-03-28 15:28:03 +11:00
bugobliterator 8215537f99 HAL_ChibiOS: deprecate realloc for ChibiOS build, so as to return error when used 2020-03-24 10:32:14 +11:00
bugobliterator 89d03f0243 AP_HAL_ChibiOS: implement standard realloc method 2020-03-24 10:32:14 +11:00
Andrew Tridgell fc0b2ef920 HAL_ChibiOS: added half-duplex protection for non-inverted 
to prevent output bytes being seen as input bytes we disable half
duplex during transmit. This was previously only done for non-inverted
UARTs. This patch enables it whether we are inverted or not. This
greatly reduces the number of bad input bytes.
 2020-03-20 12:37:52 +11:00
Peter Barker a59c3670c8 AP_HAL_ChibiOS: stash lr_thd in watchdog hardfault handler 2020-03-19 16:03:58 +11:00
Andrew Tridgell 5a4b648cf5 HAL_ChibiOS: disable flash fallback for boards with FRAM 
this saves on flash and prevents confusing results when fram fails
 2020-03-14 13:47:25 +11:00
Nick Exton 4cd39a4619 HAL_ChibiOS: improved selection of storage backend 2020-03-14 13:47:25 +11:00
Andy Piper 104dd7cd75 AP_HAL_ChibiOS: remove board subtype for OmnibusNanoV6 2020-03-14 10:20:46 +11:00
Andrew Tridgell 986ad0dc27 HAL_ChibiOS: removed unnecessary subtype defines 2020-03-14 08:35:32 +11:00
Andrew Tridgell c3f2117590 HAL_ChibiOS: fixed R9Pilot board ID 2020-03-14 07:05:22 +11:00
Andrew Tridgell 1540cf958b HAL_ChibiOS: improve error messages for flashing bootloader 
send progress as statustext messages
 2020-03-11 16:30:06 +11:00
Andrew Tridgell cf7c2b1475 HAL_ChibiOS: suppress SPI timeout error for expected delay 2020-03-11 16:30:06 +11:00
Andrew Tridgell 65cd223023 HAL_ChibiOS: implement in_expected_delay() 2020-03-11 16:30:06 +11:00
Andrew Tridgell d35fff5186 HAL_ChibiOS: set CS pins high while in bootloader 
this appears to be the root cause of the parameter resets on
CubeOrange. We need to ensure the CS pin is not floating or random
noise on the SPI bus for FRAM can cause the FRAM to become corrupt
 2020-03-11 09:53:06 +11:00
Peter Barker d0edfd2c0d AP_HAL_ChibiOS: VRUBrain-v51: reduce AP_MAX_EMBEDDED_PARAM to 1024 
Stops us overflowing on Copter and Plane builds
 2020-03-10 10:50:18 +11:00
Peter Hall fe5779fd88 AP_HAL_ChibiOS: add support for ProfiLEDs 2020-03-10 10:37:26 +11:00
Andrew Tridgell 16f34778fc HAL_ChibiOS: added f103-HWESC target 2020-03-04 16:21:06 +11:00
Andrew Tridgell bca1bd2c72 HAL_ChibiOS: added f303-HWESC firmware 2020-03-04 16:21:06 +11:00
Peter Barker 1a123e5f8d AP_HAL_ChibiOS: avoid referencing flash sector/page 22 on 1MB boards 2020-03-03 10:13:53 +11:00
Peter Barker 2d2fdf8bd0 AP_HAL_ChibiOS: make a static-const hal a reference to the external symbol 2020-03-03 10:12:14 +11:00
Andrew Tridgell ccc7d48c20 HAL_ChibiOS: reserve plenty of DMA memory for luminousbee4 2020-02-27 13:12:26 +11:00
Andrew Tridgell 669b98c6df HAL_ChibiOS: allow more than 32 WS2812 LEDs on a pin 2020-02-27 13:12:26 +11:00
Andrew Tridgell 5bfd607300 HAL_ChibiOS: added luminousbee4 flight controller 2020-02-27 13:12:26 +11:00
Peter Hall 0ca6b7cf77 AP_HAL_ChibiOS: retry neopixel until successful send 2020-02-25 11:15:55 +11:00
Andrew Tridgell 41b74ec014 HAL_ChibiOS: use DNA by default for all AP_Periph builds 
this makes multiple sensors of the same type on the bus easier
 2020-02-22 12:28:16 +11:00
Andrew Tridgell 6139860a64 HAL_ChibiOS: use default USB IDs for fmuv3 2020-02-22 12:17:05 +11:00
Andy Piper 3d0cf7e12a AP_HAL_ChibiOS: hardware M4-Cortex and M7-Cortex (and H7) implementation of HAL FFT abstraction 
implements an FFT engine based on the betaflight feature using ARM hardware accelerated CMSIS library
make the FFT feature optional
add dynamic gyro windows
add quinns and candans estimators and record in DSP state
disable DSP for boards with limited flash
calculate power spectrum rather than amplitude
start/analyse version of analysis to support threading
allocate memory in a specific region
constrain window size by CPU class
control inclusion of DSP based on board size
 2020-02-22 11:15:37 +11:00
pkocmoud 8c764bb568 hwdef: switch to (0) DNA as the default NODEID 2020-02-17 12:48:37 +11:00
pkocmoud 8f6d2aab7a hwdef: add mRo M10025 KITCAN 2020-02-17 12:48:37 +11:00
Andrew Tridgell bebfef369f HAL_ChibiOS: fixed power flags for CUAV-Nora 2020-02-12 21:17:49 +11:00
CUAVcaijie 561808ba3c HAL_ChibiOS: Added support for CUAV Nora flight controller 2020-02-12 21:17:49 +11:00
Andrew Tridgell a0fe1a7598 HAL_ChibiOS: produce more accurate clocks for DShot and PWM 2020-02-12 18:12:39 +11:00
Andrew Tridgell 9e0edba31d HAL_ChibiOS: raised timer clocks to 200MHz 
this gives more flexibility in setting up timers for DShot
 2020-02-12 18:12:39 +11:00
Andrew Tridgell 8b93e0f57d HAL_ChibiOS: prevent double init of USB 
this prevented init of USB CubeBlack on Windows. Thanks to Randy for
reporting
 2020-02-12 17:44:09 +11:00
Andrew Tridgell adf17414e0 HAL_ChibiOS: fixed output string for non-DMA capable chan 
this fixes a problem where the user requests DShot (which rquired DMA)
on an output channel which cannot allocate a DMA channel. We end up
sending normal PWM, so the string representation of the output modes
should reflect that
 2020-02-12 14:08:40 +11:00
Andrew Tridgell e8ab35a192 HAL_ChibiOS: fixed stdout in early startup bug 
this caused a failure to boot on some boards if they tried to print
messages in early startup code before hal was initialised

thanks to @Shadowru for reporting the issue
 2020-02-12 13:51:10 +11:00
Matt Lawrence e6f32f4572 AP_HAL_ChibiOS: Fix waf --default-parameters 
If a defaults.parm file was present in the hwdef, waf ignored the --default-parameters=xyz.parm command line argument.  This will allow it to use that command line argument specified file.
 2020-02-11 11:00:01 +11:00
Andrew Tridgell 12f31e328f HAL_ChibiOS: fixed dshot docs for Pixhawk4 2020-02-08 14:15:37 +11:00
Randy Mackay 76c982ced8 AP_HAL_CHibiOS: update Pixhawk4 README to 16 pwm outputs 
also correct Main PWM ouput's number of groups
 2020-02-08 14:14:32 +11:00
Andrew Tridgell bdef7d7158 HAL_ChibiOS: fixed default fast sampling on CubeOrange and Durandal 2020-02-05 12:48:51 +11:00
Andrew Tridgell e0cd790505 HAL_ChibiOS: fixed spektrum RC input on Pixracer 
RCININT is inverted compared to RCIN, so need to enable SBUS_INV pin
 2020-02-05 10:45:36 +11:00
Randy Mackay a71ae54d3a AP_HAL: add RCOutput::get_output_mode_banner 2020-02-04 12:23:33 +11:00
giacomo892 529f067914 HAL_ChibiOS: save more flash on SuccexF4 2020-02-02 06:02:59 +11:00
giacomo892 23a42b1914 HAL_ChibiOS: disable parachute and sprayer on SuccexF4 2020-02-02 06:02:59 +11:00
Andrew Tridgell 8b2629bfc1 HAL_ChibiOS: save 7k flash for boards close to flash limit 2020-02-01 06:58:43 +11:00
Andrew Tridgell c8395bb2c1 HAL_ChibiOS: use blocking semaphore for new_input() 
this prevents a race where we continually fail to get new input
 2020-01-31 11:09:07 +11:00
Andrew Tridgell 05f095f338 HAL_ChibiOS: fixed build 2020-01-31 11:09:07 +11:00
Andrew Tridgell 3fe3c8ecdc HAL_ChibiOS: implement pulse_input_enable() 
and cleanup use of mutexes in RC input
 2020-01-31 11:09:07 +11:00
Andrew Tridgell 9c0cf0871b HAL_ChibiOS: added disable() API for pulse input 2020-01-31 11:09:07 +11:00
Andrew Tridgell 27c114828b HAL_ChibiOS: fixed bitmask error on storage erase 2020-01-31 11:06:29 +11:00
Peter Barker bff97eb150 AP_HAL_ChibiOS: assert that storage size is an even number of storage-lines 2020-01-30 19:53:02 +11:00
Andrew Tridgell a7b6887f44 HAL_ChibiOS: added a f303-Universal build target 2020-01-26 09:12:55 +11:00
Andrew Tridgell 7a812a5516 HAL_ChibiOS: use cortex m7 instructions on F7/H7 2020-01-25 08:50:09 +11:00
Peter Barker 73c32f403b AP_HAL_ChibiOS: do not compile EKF2 for MatekF405-Wing 2020-01-21 11:53:18 +11:00
Peter Barker e189b17efb AP_HAL_ChibiOS: remove unused AnalogIn fields 2020-01-21 10:06:18 +11:00
Andrew Tridgell a8501a91c7 HAL_ChibiOS: fixed handling of write mutex 
this fixes an issue with log download on USB and mavlink throughput
caused lock contention. The issue was introduced with the changes for
unbuffered writes recently (does not affect stable releases)
 2020-01-21 08:37:25 +11:00
Andrew Tridgell 982cff0695 AP_HAL_ChibiOS: make all semaphores recursive 
the cost is very similar and this prevents an easy coding error which
can occur on less used code paths
 2020-01-19 20:19:30 +11:00
Andrew Tridgell 0aae8e13c1 AP_HAL_ChibiOS: use take_blocking instead of HAL_SEMAPHORE_BLOCK_FOREVER 
this makes for cleaner and smaller code as the failure case is not
needed
 2020-01-19 20:19:30 +11:00
Andrew Tridgell 7ce771734c HAL_ChibiOS: fixed fw build size for several boards 2020-01-19 07:24:57 +11:00
Andrew Tridgell 320a703afc HAL_ChibiOS: fixed UART DMA config for ALT() pins 2020-01-19 07:24:57 +11:00
Andrew Tridgell 0cc6d4a70b HAL_ChibiOS: added support for FrSky R9 flight controller 2020-01-18 17:00:44 +11:00
Andrew Tridgell f7a65afa67 HAL_ChibiOS: allow for baro with no arguments 2020-01-18 17:00:44 +11:00
Andrew Tridgell 83d3488eb2 HAL_ChibiOS: fixed ZubaxGNSS board ID 2020-01-18 15:44:51 +11:00
Michel Pastor 6fa09c05c2 HAL_ChibiOS: added SuccexF4 board 2020-01-18 14:54:29 +11:00
Andrew Tridgell ce4120e803 HAL_ChibiOS: disable parachute and sprayer on MatekF405-Wing 
fixes build size
 2020-01-18 13:48:48 +11:00
Andrew Tridgell a935b764f4 HAL_ChibiOS: fixed UART DMA issue on F4 
disabling in rx irq callback should only be done on F3
 2020-01-18 07:13:11 +11:00
Andrew Tridgell a220b37bf8 HAL_ChibiOS: use 4k bouncebuffer for sdcard 
match AP_Logger IO size
 2020-01-18 07:13:11 +11:00
Andrew Tridgell 2b7bffa906 HAL_ChibiOS: adjust dma reserve allocation 
use larger target and allow for smaller allocation
 2020-01-18 07:13:11 +11:00
Andrew Tridgell 9554103418 HAL_ChibiOS: don't extend alloc of iomcu uart 2020-01-18 07:13:11 +11:00
Andrew Tridgell 56985f8c33 HAL_ChibiOS: added checking on bouncebuffer allocation 
fail operations if DMA bouncebuffer alloc fails
 2020-01-18 07:13:11 +11:00
Andrew Tridgell a7b83b1e26 HAL_ChibiOS: allow for unbuffered writes without DMA 2020-01-16 20:36:54 +11:00
CUAVcaijie 7e89591e90 HAL_ChibiOS: Modify the default orientation of the compass 2020-01-08 07:33:51 +11:00
Andrew Tridgell fced7d78fc HAL_ChibiOS: fixed clock src for I2C4 on H7 2020-01-08 05:56:23 +11:00
Andrew Tridgell 43172bdd57 HAL_ChibiOS: switch non-composite USB ID 
use newly allocated 0x1209/0x5740
 2020-01-06 11:43:15 +11:00
Andrew Tridgell 793b867706 HAL_ChibiOS: switched to new USB VID for dual-CDC boards 2020-01-06 09:55:26 +11:00
Andrew Tridgell bb5c1d07e1 HAL_ChibiOS: implement new UART option bits 2020-01-03 17:32:23 +11:00
Andrew Tridgell ab0f1a8887 HAL_ChibiOS: added max uarts check 2020-01-03 17:32:23 +11:00
Andrew Tridgell 0d31e614ed HAL_ChibiOS: added ALT(1) configs for more boards 
this allows more boards to use the FPort protocol
 2020-01-03 17:32:23 +11:00
Andrew Tridgell 61f8e6f0d1 HAL_ChibiOS: added alt config for USART6 on MatekF765-Wing 2020-01-02 12:13:55 +11:00
Andrew Tridgell 296a4cb086 HAL_ChibiOS: re-format and fix chibios_hwdef.py for flake8 2020-01-02 09:52:57 +11:00
Andrew Tridgell 9c2b5a05bd HAL_ChibiOS: fixed python3 error 2020-01-02 09:52:57 +11:00
Andrew Tridgell c5df48faa7 HAL_ChibiOS: break out make_line() for PAL_LINE defines 2020-01-02 09:52:57 +11:00
Andrew Tridgell 66dd5925cf HAL_ChibiOS: added support for alternative pin configs 2020-01-02 09:52:57 +11:00
Andrew Tridgell 06a9baeb9b HAL_ChibiOS: adjust fmuv3 SPI priority 
fixes an issue with SPI4 assignment
 2020-01-02 09:52:57 +11:00
Andrew Tridgell a30e637484 HAL_ChibiOS: fixed bug in UART pin assignment 
this fixes an issue with the setting of pullup/pulldown on UARTs. It
also adds enforcement of DMA assignment for DMA required peripherals
 2020-01-02 09:52:57 +11:00
Andrew Tridgell 8ffd1050eb HAL_ChibiOS: fixed build on STM32F3 2020-01-02 09:52:57 +11:00
Andrew Tridgell b1ca7380be HAL_ChibiOS: re-implement half-duplex using HDSEL switching 
this makes half-duplex more reliable on UARTs with pullups or level
shifters
 2020-01-02 09:52:57 +11:00
Andrew Tridgell faf34970e1 HAL_ChibiOS: automatically control pullup/pulldown on inverted UARTs 
this makes setup of sport telemetry much easier
 2020-01-02 09:52:57 +11:00
Andrew Tridgell 58e915155d HAL_ChibiOS: fixed panic to output error every 500ms 2020-01-02 09:52:57 +11:00
Andrew Tridgell 8fdbb88827 HAL_ChibiOS: implement erase() method on Storage in HAL_ChibiOS 2020-01-02 09:52:57 +11:00
Andrew Tridgell e9dded98ce HAL_ChibiOS: enable UART6 for use as RC input on MatekF765-Wing 2020-01-02 09:52:57 +11:00
Andrew Tridgell 6447cc2519 HAL_ChibiOS: support receiver RSSI 2020-01-02 09:52:57 +11:00
Andrew Tridgell f68b9bafd8 HAL_ChibiOS: fixed H7 I2C timing 
we were running the clock at too low speed. This affected the SSD1306 display
 2019-12-30 16:10:44 +11:00
Andy Piper 6f979d5f7f AP_HAL_ChibiOS: define OSD_ENABLED as 1 rather than ENABLED 2019-12-30 13:02:04 +11:00
CUAVcaijie ccd54409f3 HAL_ChibiOS: Adding SPI devices for CUAV_GPS 2019-12-26 15:51:44 +11:00
CUAVcaijie 2df2e5c275 HAL_ChibiOS: Fix DMA of SPI1 TX on STM32F412 2019-12-26 15:50:18 +11:00
Andrew Tridgell 4b4642dd4d HAL_ChibiOS: allow handling of much higher receiver baudrates with DMA 
this uses two DMA RX bouncebuffers to minimise the time with DMA
disabled so that we can handle much higher baudrates
 2019-12-26 10:42:48 +11:00
Andrew Tridgell 58292821b3 HAL_ChibiOS: fix DMA on UARTs for F303 2019-12-26 10:42:48 +11:00
Andrew Tridgell 652d137594 HAL_ChibiOS: fixed DMA channels for f3 USART2 2019-12-26 10:42:48 +11:00
Andrew Tridgell 6eb86c6cdb HAL_ChibiOS: removed PB1 and PB0 TIM1 complementary channels for F76x 
these do not work, possibly a datasheet bug
 2019-12-23 21:46:57 +11:00
Andrew Tridgell c8c6c80aef HAL_ChibiOS: switch MatekF765 to timer 12 
fixes PWM 5 and 6
 2019-12-23 21:46:57 +11:00
Andrew Tridgell ccd1ce406c HAL_ChibiOS: scale uart rx buffer size with baudrate 
this ensures we have enough buffer space for a RTK GPS, as well as for
high speed comms with a companion computer
 2019-12-23 09:54:36 +11:00
Andrew Tridgell 1248519b11 HAL_ChibiOS: account for empty uarts in uart count 
this fixes uart count on MatekF405-Wing
 2019-12-22 08:27:17 +11:00
Andrew Tridgell 6f6fbb5b48 HAL_ChibiOS: make pwm pin pulldown 2019-12-20 16:50:48 +11:00
Andrew Tridgell f732a482fe HAL_ChibiOS: support wider range of clock frequencies 2019-12-20 16:50:48 +11:00
Andrew Tridgell a9946b41e9 HAL_ChibiOS: added f103-Trigger board 2019-12-20 16:50:48 +11:00
Andrew Tridgell a87e3e41f0 HAL_ChibiOS: make Pixhawk4 GPS2 connection clearer 2019-12-20 12:34:26 +11:00
Andrew Tridgell d422825715 HAL_ChibiOS: removed per-board AP_FEATURE_RTSCTS and AP_FEATURE_SBUS_OUT 
not needed any more
 2019-12-18 17:18:44 +11:00
Andrew Tridgell fc867b1596 HAL_ChibiOS: automatically set AP_FEATURE_SBUS_OUT 2019-12-18 17:18:44 +11:00
Andrew Tridgell b3459c024c HAL_ChibiOS: automatically set AP_FEATURE_RTSCTS 2019-12-18 17:18:44 +11:00
Andrew Tridgell b99d6e075c HAL_ChibiOS: change CUAVv5Nano volt scale to 18.000 2019-12-18 15:50:34 +11:00
Andrew Tridgell f17178ace0 HAL_ChibiOS: fixed build of SPI clock test 2019-12-13 09:30:48 +11:00
Andrew Tridgell 95b527dac8 HAL_ChibiOS: save 3k of flash on MatekF405-Wing 
disable SMBUS and fuel battery monitors
 2019-12-09 21:35:00 +11:00
Andrew Tridgell 4f429e6c5a HAL_ChibiOS: fixed handling of 16bit timer wrap 
this fixes #12948
 2019-12-09 12:43:39 +11:00
Andrew Tridgell d4d44990e1 HAL_ChibiOS: added assert for systime_t size 2019-12-09 12:43:39 +11:00
Henry Wurzburg ccc7968f91 HWDEF: Speedybeef4 change I2C internal mask to 0 to allow probing ext baros 2019-12-09 12:03:33 +11:00
Andy Piper 16d2dd4e2d AP_HAL_ChibiOS: specify Durdanal IMUs so that ordering is correct 2019-12-08 17:23:20 +11:00
Andrew Tridgell 0a81c48d9c HAL_ChibiOS: lower gains on CubyOrange and Yellow heater 
this should reduce the chance of baro oscillation due to rapid change
in heater temperature
 2019-11-28 21:35:29 +11:00
Phillip Kocmoud 73c56220ff HAL_ChibiOS: update mRoControlZeroF7 I2C mask 2019-11-27 16:08:19 +11:00
Andrew Tridgell 0317b66139 HAL_ChibiOS: update mRoX21-777 I2C mask 
all external
 2019-11-27 14:25:18 +11:00
Andrew Tridgell 0c4a4ccb74 HAL_ChibiOS: optionally print information on a HardFault 2019-11-27 14:12:04 +11:00
Andrew Tridgell ef993f380f HAL_ChibiOS: use system_halt_hook() 2019-11-27 14:12:04 +11:00
Andrew Tridgell c1575654e2 HAL_ChibiOS: added optional debug code for hardfaults and panics 
this implements a soft-serial print function that can be used to get
debug out on a GPIO pin in a panic
 2019-11-27 14:12:04 +11:00
Michael du Breuil 21f6695acd AP_HAL_ChibiOS: Add defaults.parm for CubeOrange and CubeYellow 2019-11-20 20:52:36 +11:00
Stephen Dade e1e7c6ea8a AP_HAL: Ensure scheduler does not log if there is no logger 2019-11-20 11:46:34 +11:00
Andrew Tridgell 4636a4c458 HAL_ChibiOS: support LEDs with a wider range of frequencies 
this fixed LEDs on FMUv5 boards on first 4 aux channels. We need to
round up not round down in the resulting bitrate
 2019-11-18 15:54:36 -08:00
Andrew Tridgell 4745c9f78d HAL_ChibiOS: setup define for number of serial ports 2019-11-19 07:13:20 +08:00
Andrew Tridgell 0751756e91 HAL_ChibiOS: retain OPENDRAIN if set on a pin 
this allows OPENDRAIN when set on a pin to be retained when set with a
pinMode(). This fixes a partially lit B/E LED on the Pixhawk4
 2019-11-17 11:45:38 +11:00
Andrew Tridgell fdd2e93f7e HAL_ChibiOS: disable debug port on f103 to save memory 2019-11-09 17:11:32 +11:00
Andrew Tridgell a90a2e20dc HAL_ChibiOS: enable CAN callbacks 
this allows for much more reliable CAN comms in AP_Periph
 2019-11-09 17:11:32 +11:00
Matt Lawrence 7a63bda027 Frame_params: Updated solo params for Copter 4 2019-11-08 07:28:17 +08:00
Andrew Tridgell 1db4afb844 HAL_ChibiOS: enable MatekF765 LED pin 
- use tonealarm for buzzer
 - add more baro options
 2019-11-04 08:14:27 +11:00
Andrew Tridgell 64aae4f67e HAL_ChibiOS: removed heater control 2019-11-02 16:31:04 +11:00
Andrew Tridgell d8445928d1 HAL_ChibiOS: fixed SPI timeout bug 
thanks to CUAV for noticing
 2019-11-01 22:11:17 +11:00
Andrew Tridgell 6c0c09e690 Revert "HAL_ChibiOS: lower speed of mpu9250" 
This reverts commit a4e51f3942.

This commit led to more errors on the first IMU on a normal
CubeBlack. I don't yet know why this happens, but I'm removing this in
master for now as it affects primary IMU
 2019-11-01 11:20:32 +11:00
Andrew Tridgell 22f0e8a065 HAL_ChibiOS: added RM3100 in f303-GPS 2019-11-01 10:53:53 +11:00
Andrew Tridgell 207dffba88 HAL_ChibiOS: moved compass support for f103-GPS 
not needed for other builds
 2019-11-01 10:53:53 +11:00
Andrew Tridgell 1d44718016 HAL_ChibiOS: added f303-periph and f303-GPS firmware 2019-11-01 10:53:53 +11:00
Andrew Tridgell bc1de7a208 HAL_ChibiOS: support STM32F3xx MCUs 2019-11-01 10:53:53 +11:00
Siddharth Purohit 8c413d3c09 HAL_ChibiOS: fix writing into a NULL pointer CANFD interrupt 2019-10-30 22:15:04 +11:00
Andrew Tridgell 8f14ea9e80 HAL_ChibiOS: enable advanced timers if we have any N PWM channels 2019-10-29 13:09:14 +11:00
Andrew Tridgell ff30ba87bc HAL_ChibiOS: fixed build of sparky2 
running out of flash
 2019-10-29 12:15:12 +11:00
Andrew Tridgell fcf9356e2c HAL_ChibiOS: fixed build of f103 rangefinder 2019-10-29 08:07:29 +11:00
Andrew Tridgell a4e51f3942 HAL_ChibiOS: lower speed of mpu9250 
it isn't handling the full speed well, getting some SPI transfer
errors
 2019-10-28 21:06:41 +11:00
Andrew Tridgell b5af1edf0d HAL_ChibiOS: moved app_descriptor to start of flash 
this prevents the bootloader from finding it's own image as a false
posititve in searching for the app_descriptor
 2019-10-28 15:53:16 +11:00
Andrew Tridgell 3800d7c084 HAL_ChibiOS: added crazyflie2 bootloader 2019-10-28 09:27:31 +11:00
Andrew Tridgell d1bc0f236d HAL_ChibiOS: added pragma once for watchdog header 2019-10-26 15:32:10 +11:00
Andrew Tridgell fc8d9e8af5 HAL_ChibiOS: added RTC_BOOT_FWOK value for RTC reboot register 
this is used in CAN firmware to know if the main app firmware has run
for long enough to be considered good
 2019-10-26 15:32:10 +11:00
Andrew Tridgell 378d5c7a5a HAL_ChibiOS: added expected delay in bootloader flash 2019-10-25 21:36:55 +11:00
Andrew Tridgell 81325ab14d HAL_ChibiOS: fixed multi-page bootloader update 
and use new enum
 2019-10-25 21:36:55 +11:00
Andrew Tridgell 6f9fda5094 HAL_ChibiOS: removed CAN_APP_VERSION_MAJOR from hwdef.dat 2019-10-25 13:52:43 +11:00
Andrew Tridgell 1bf037297d HAL_ChibiOS: set correct APJ_BOARD_ID for ZubaxGNSS 2019-10-25 09:35:27 +11:00
Andrew Tridgell 49e669aa1f HAL_ChibiOS: support uncompressed bootloader on f103-periph 
this allows update with very low memory
 2019-10-24 22:03:43 +11:00
Andrew Tridgell cffb434de8 HAL_ChibiOS: tweak stack on f103-periph 2019-10-24 22:03:43 +11:00
Andrew Tridgell a3b61a1b02 HAL_ChibiOS: enable ROMFS for ZubaxGNSS and f103-periph 
this allows for bootloader update
 2019-10-24 22:03:43 +11:00
Andrew Tridgell a224342b18 HAL_ChibiOS: enable ROMFS for CUAV_GPS 2019-10-24 22:03:43 +11:00
Andrew Tridgell f69be70772 HAL_ChibiOS: save some memory in f103-periph build 2019-10-22 17:51:24 +11:00
Andrew Tridgell 0a4576728e HAL_ChibiOS: support a app->bootloader comms region in SRAM 
this allows for UAVCAN update without a 2nd BeginFirmwareUpdate call
 2019-10-21 19:12:01 +11:00
Andrew Tridgell 5605ad6c59 HAL_ChibiOS: enable MissionPlanner compatible app descriptor 2019-10-21 19:12:01 +11:00
Andrew Tridgell 6b841e781c HAL_ChibiOS: pat watchdog immediately in expect_delay_ms() 
this fixes a watchdog issue on AP_Periph if we don't have a timer
thread
 2019-10-21 19:12:01 +11:00
Andrew Tridgell 7973a25c40 HAL_ChibiOS: fixed stack on ZubaxGNSS 2019-10-21 19:12:01 +11:00
Andrew Tridgell 910129eafc HAL_ChibiOS: enable watchdog in AP_Periph firmwares 2019-10-21 19:12:01 +11:00
Andrew Tridgell 5efaea2d92 HAL_ChibiOS: fixed flash storage in ZubaxGNSS 2019-10-21 19:12:01 +11:00
Andrew Tridgell e376884377 HAL_ChibiOS: fixed Zubax bootloader debug 2019-10-21 19:12:01 +11:00
Andrew Tridgell 1f06aa069e HAL_ChibiOS: fixed uprintf() in bootloader 2019-10-21 19:12:01 +11:00
Andrew Tridgell e6cb35090c HAL_ChibiOS: fixed page size for STM31F105 flash 2019-10-21 19:12:01 +11:00
Andrew Tridgell 0ef2a60682 HAL_ChibiOS: support ZubaxGNSS as a AP_Periph target 2019-10-21 19:12:01 +11:00
Andrew Tridgell 44f895ab16 HAL_ChibiOS: fixed for ZubaxGNSS build 2019-10-21 19:12:01 +11:00
Andrew Tridgell 8c796ecd2c HAL_ChibiOS: support f103-RangeFinder 2019-10-21 19:12:01 +11:00
Andrew Tridgell 3cd7dd9f12 HAL_ChibiOS: disable GPS and MAG in base f103 build 
enable in f103-GPS
 2019-10-21 19:12:01 +11:00
Andrew Tridgell 3ca478747c HAL_ChibiOS: enable airspeed in f103-ADSB 2019-10-21 19:12:01 +11:00
Andrew Tridgell fa6b6140e3 HAL_ChibiOS: split out f103-GPS from base f103-periph 
this makes it easier to create more peripheral variants
 2019-10-21 19:12:01 +11:00
Mirko Denecke b84dcd483d AP_HAL_ChibiOS: remove unnecessary tabs and whitespaces 2019-10-21 08:01:56 +11:00
Andrew Tridgell e90bd27435 HAL_ChibiOS: fixed I2C on F103 
we need to use open-drain, and the sign of the constant matters
 2019-10-20 20:31:02 +11:00
Andrew Tridgell 6f11926dbd HAL_ChibiOS: enable NCP5623 LED in f103-GPS 2019-10-20 20:31:02 +11:00
Siddharth Purohit 2b410479af HAL_ChibiOS: remove unused code 2019-10-19 09:55:38 +11:00
Andrew Tridgell b9885034b1 HAL_ChibiOS: added a f103-ADSB firmware 
for presenting a ping ADSB device as UAVCAN
 2019-10-16 13:13:24 +11:00
Andrew Tridgell 85271a8747 HAL_ChibiOS: split out f103-GPS from base f103-periph 
this makes it easier to create more peripheral variants
 2019-10-16 13:13:24 +11:00
Andrew Tridgell b7ae12a9d3 HAL_ChibiOS: reduce max compasses to 1 on AP_Periph 2019-10-16 08:58:52 +11:00
Andrew Tridgell 97dc76732c HAL_ChibiOS: drop mRoControlZeroF7 DPS310 clock to 5MHz 2019-10-15 10:22:15 +11:00
Henry Wurzburg c515f4b317 AP_HAL_ChibiOS/hwdef: update KakuteF4 readme 2019-10-14 10:04:30 +11:00
Andy Piper 28b866cc8f AP_HAL_ChibiOS: hardware definitions for Kakute F7 Mini 2019-10-12 21:53:55 +11:00
Andrew Tridgell 77bf67e15f HAL_ChibiOS: fixed padding of neopixel bits 
lack of padding at start caused occasional glitches in colors
displayed
 2019-10-10 10:41:19 +11:00
Andrew Tridgell 15e4641e51 AP_HAL_ChibiOS: cleanup ifdefs for SLCAN enable 2019-10-08 10:02:14 +11:00
Andrew Tridgell 555f56a8af HAL_ChibiOS: removed wait on CAN peripheral in H7 
these wait busy loops can take a very long time, and end up causing
interrupts to be lost elsewhere in the system, causing lost bytes on
UARTs

We should not have while loops waiting on peripharals like this. If we
do need to wait for a flag to clear then it needs to be done in a low
priority thread, or we need to check for completion in a timer

CAN still seems to work with this change, but needs flight testing
 2019-10-03 15:26:47 +10:00
Andrew Tridgell 47f2f1764d HAL_ChibiOS: generate HAL_MEMORY_TOTAL_KB for each board 2019-10-01 09:29:55 +10:00
Andrew Tridgell e3a965272c HAL_ChibiOS: added Pixhawk1-1M 
this is for 1M versions of the Pixhawk1. It is smaller than fmuv2 as
it only links the specific sensors needed for Pixhawk1
 2019-10-01 09:08:25 +10:00
Mark Whitehorn d8a07b6c44 HAL_ChibiOS: fix FMU fast_channel_mask 
fix IO fast channel mask
use IOMCU chmask to only set right channels
remove unused variable
 2019-10-01 07:13:33 +10:00
Andrew Tridgell 748cf39116 HAL_ChibiOS: disable DMA for RCIN on Pixracer 
this frees up DMA for USART1_RX, which gives DMA for input over the
SERIAL5 WiFi port, which is important for applications where a
pixracer is being fed vision data over WiFi
 2019-09-30 07:58:40 +10:00
Andrew Tridgell e820219202 HAL_ChibiOS: changed optimisation of higher end boards to -O2 
-O3 does not seem to be a win, and takes up a lot more flash
 2019-09-28 08:57:26 +10:00
Peter Barker 9fb715692e AP_HAL_ChibiOS: correct include of mavlink header for analog debug 2019-09-25 12:22:27 +10:00
Andrew Tridgell 386e7dc3e8 HAL_ChibiOS: fixed delay for OneShot125 channels 
we were delaying output for OneShot125 by 8x as much as we need to,
which reduced our max loop rate
 2019-09-22 19:43:35 +10:00
Andrew Tridgell 850892c3d9 HAL_ChibiOS: fixes from LGTM errors 2019-09-22 18:35:15 +10:00
Michael du Breuil 95bca05322 AP_HAL_ChibiOS: Only include MAVLink when using the MAVLink debugging 2019-09-19 10:48:25 +09:00
Andrew Tridgell 3c058851b2 HAL_ChibiOS: fixed undef for define lines 
this fixes IMU heater enable for CubeBlack+
 2019-09-16 12:53:44 +10:00
Andrew Tridgell 255e769171 HAL_ChibiOS: fixed IMU order and board ID for CubeBlack+ 2019-09-16 12:53:44 +10:00
bugobliterator e82da992c9 HAL_ChibiOS: hwdef: add hwdef for CubeBlack+ 2019-09-16 12:53:44 +10:00
Andrew Tridgell 28cca004f2 HAL_ChibiOS: added default params for skyviper-journey 2019-09-12 14:02:36 +10:00
Andrew Tridgell 1dca0a16f5 HAL_ChibiOS: rename skyviper-f412 to skyviper-journey 2019-09-12 14:02:36 +10:00
Andrew Tridgell b33afde884 HAL_ChibiOS: allow safety button on CUAV_GPS to be used for "stay in bootloader" 
allows for recovery of bad CAN firmware
 2019-09-10 16:22:33 +10:00
Andrew Tridgell c6a9f067e2 HAL_ChibiOS: enable LEDs on CUAV_GPS 2019-09-10 16:22:33 +10:00
Andrew Tridgell 3dfe15443d HAL_ChibiOS: fixed orientation of CUAV_GPS compass 2019-09-10 16:22:33 +10:00
Andrew Tridgell 03c1a8bfd9 HAL_ChibiOS: use safety button logic from AP_BoardConfig 2019-09-10 16:22:33 +10:00
Andrew Tridgell 0ea67943b9 HAL_ChibiOS: enable safety button on CUAV_GPS 2019-09-10 16:22:33 +10:00
Andrew Tridgell 186eedf838 HAL_ChibiOS: enable safety LED 2019-09-10 16:22:33 +10:00
Andrew Tridgell 75696997cc HAL_ChibiOS: added buzzer support to CUAV_GPS 2019-09-10 16:22:33 +10:00
Andrew Tridgell cbe0af2463 HAL_ChibiOS: setup for LEDs on KakuteF4 
this makes Kopis1 display LEDs properly
 2019-09-10 13:03:28 +10:00
Andrew Tridgell f441223b55 HAL_ChibiOS: implement updated NeoPixel API 
allow for N leds per chain, and setting separate colours per led in
each chain
 2019-09-10 13:03:28 +10:00
Tom Pittenger e3416b66dc AP_HAL_ChibiOS: add Neopixel output type, similar to dshot 2019-09-10 13:03:28 +10:00
Andrew Tridgell 91e8752c17 HAL_ChibiOS: wrap more libc functions 
this saves a few k of flash as it avoids linking libc versions of some
functions
 2019-09-09 13:31:30 +10:00
Andrew Tridgell 3166f84954 HAL_ChibiOS: added vsnprintf wrapper 
this allows us to use a common snprintf implementation
 2019-09-09 13:31:30 +10:00
Andrew Tridgell 83872c23e5 HAL_ChibiOS: fixed AP_Periph build 2019-09-06 08:51:45 +10:00
Andrew Tridgell fd80220d3e HAL_ChibiOS: setup PH4-mini RCIN port by default 2019-09-06 08:51:45 +10:00
Andrew Tridgell 54649a0e4f HAL_ChibiOS: fixed KakuteF4 define for SERIAL2 2019-09-06 08:51:45 +10:00
Andrew Tridgell 06b272705e HAL_ChibiOS: run RCIN thread at 1kHz 
this gives fast enough response for SBUS parsing on a UART
 2019-09-06 08:51:45 +10:00
Andrew Tridgell c841b39ea2 HAL_ChibiOS: switch to AP::RC() for AP_RCProtocol 2019-09-06 08:51:45 +10:00
Andrew Tridgell bf2cf7834d HAL_ChibiOS: fixed a bug in parity/stop-bit setting on STM32F7 and H7 
and add get_options() method
 2019-09-06 08:51:45 +10:00
Andrew Tridgell ad2890dc5a HAL_ChibiOS: added connector pinouts for PH4-mini 2019-09-06 08:51:45 +10:00
Andrew Tridgell b344946300 HAL_ChibiOS: prevent duplicate sensors in hwdef.dat 
throw an error on configure if there is a duplicate
 2019-09-05 06:37:35 +10:00
Andrew Tridgell 2c5c8106a5 HAL_ChibiOS: removed duplicate barometer from fmuv5 2019-09-04 21:24:01 +10:00
Andrew Tridgell 708ee47c03 HAL_ChibiOS: fixed f103 rm3100 2019-09-04 16:27:47 +10:00
Andrew Tridgell c2c8702329 HAL_ChibiOS: convert remaining boards to use COMPASS specifier 2019-09-04 16:27:47 +10:00
Andrew Tridgell 3aa01448ff HAL_ChibiOS: use COMPASS specifier for f103-periph 2019-09-04 16:27:47 +10:00
Andrew Tridgell 316e7cf7e6 HAL_ChibiOS: fixed mini-pix compass and baro probing 
removed dup baro and fixed compass probe
 2019-09-04 16:27:47 +10:00
Andrew Tridgell beca17c638 HAL_ChibiOS: use GET_I2C_DEVICE() for i2c probing 
this allows for the driver probing to use a macro to prevent loading
of duplicate i2c devices (AP_Compass does this)
 2019-09-04 16:27:47 +10:00
Michael du Breuil e19f0ef238 AP_HAL_ChibiOS: Remove set_stop_pin from AnalogSource 2019-09-04 09:54:50 +10:00
E Thomas c09d6908ed Enabled active buzzer output on OmnibusNanoV6 2019-09-03 09:59:53 +10:00
Andrew Tridgell 72494788f7 HAL_ChibiOS: convert more boards to use BARO specifier 2019-08-28 06:54:11 +10:00
Andrew Tridgell 0667747506 HAL_ChibiOS: convert some more boards to new IMU specifiers 2019-08-28 06:54:11 +10:00
Andrew Tridgell 5ce4ff916e HAL_ChibiOS: fixed Pixhawk1 gyro orientation 
this was broken by the recent switch to hwdef.dat for orientations
 2019-08-27 19:29:37 +10:00
Andrew Tridgell 0ffe2e75be HAL_ChibiOS: fixed warnings 2019-08-27 15:40:43 +10:00
Andrew Tridgell 9d760a2956 HAL_ChibiOS: disable re-entrancy in FATFS 
not needed now we have a semaphore in AP_Filesystem
 2019-08-27 15:40:43 +10:00
Andrew Tridgell bf79b65e07 HAL_ChibiOS: simplify stubs code 2019-08-27 15:40:43 +10:00
Andrew Tridgell d1565a96c5 HAL_ChibiOS: wrap cacheBuffer functions 
needed to avoid problem with end() method in UARTDriver shadowing with
F7 implementation of cache macros
 2019-08-27 15:40:43 +10:00
Andrew Tridgell b867ef35c0 HAL_ChibiOS: use AP_Filesystem API 2019-08-27 15:40:43 +10:00
Andrew Tridgell b30f3697d2 HAL_ChibiOS: fixed build without ISR limit 2019-08-27 10:29:56 +10:00
Andrew Tridgell 97c56c068e HAL_ChibiOS: update board IDs for AP_Periph firmwares 2019-08-27 10:29:56 +10:00
Andrew Tridgell 63f39c2bd6 HAL_ChibiOS: fixed build of iomcu firmware 2019-08-27 10:29:56 +10:00
Andrew Tridgell 64921b64f5 HAL_ChibiOS: enable sensors in peripheral firmwares 2019-08-27 10:29:56 +10:00
Andrew Tridgell fa76d1fbe6 HAL_ChibiOS: disable watchdog save in bootloader 2019-08-27 10:29:56 +10:00
Andrew Tridgell 5cbe85ee19 HAL_ChibiOS: allow for ADC and clock overrides 2019-08-27 10:29:56 +10:00
Andrew Tridgell dc89d10ccf HAL_ChibiOS: added hwdef.dat for CUAV_GPS 2019-08-27 10:29:56 +10:00
Andrew Tridgell c8806acaf5 HAL_ChibiOS: use AP_PERIPH env var 2019-08-27 10:29:56 +10:00
Andrew Tridgell cbc83d68cd HAL_ChibiOS: allow for CAN enable override on F4 2019-08-27 10:29:56 +10:00
Andrew Tridgell fb68fa8bc9 HAL_ChibiOS: fixed typo for 512k F4 parts 2019-08-27 10:29:56 +10:00
Andrew Tridgell e51a1a88df HAL_ChibiOS: initial hwdef-bl.dat for CUAV CAN GPS 2019-08-27 10:29:56 +10:00
Andrew Tridgell 66ab585a24 HAL_ChibiOS: setup defaults for CAN app versions 2019-08-27 10:29:56 +10:00
Andrew Tridgell d711bed405 HAL_ChibiOS: set default node ID of 117 
this allows for flight controllers without DNA support
 2019-08-27 10:29:56 +10:00
Andrew Tridgell ababe1e81d HAL_ChibiOS: disable UART support in f103-periph bootloader 2019-08-27 10:29:56 +10:00
Andrew Tridgell 2facfe0baa HAL_ChibiOS: support empty UART_ORDER 
for CAN bootloader without uart support
 2019-08-27 10:29:56 +10:00
Andrew Tridgell 9a7b52fd15 HAL_ChibiOS: added hwdef.dat for f103-periph 2019-08-27 10:29:56 +10:00
Andrew Tridgell 16bdaaa1af HAL_ChibiOS: added support for STM31F10x for AP_Periph 2019-08-27 10:29:56 +10:00
Stone white ec911710c9 hwdef: Enable Spektrum 3.3V VDD Power on fmuv5 2019-08-26 17:27:02 +10:00
Michael du Breuil 56e35e0712 AP_HAL_ChibiOS: Remove almost redundant code duplication from the HAL 2019-08-26 17:24:09 +10:00
Andrew Tridgell ffe0f338d3 HAL_ChibiOS: enable utime() API 2019-08-26 15:41:44 +10:00
Henry Wurzburg 00c111651a ChiBios: Omnibusf4pro hwdef tweak to allow active or passive buzzer 2019-08-26 12:22:53 +10:00
Andrew Tridgell aeb58cede1 HAL_ChibiOS: I2C timeout should be send+recv, not MAX(send,recv) 
MAX() is right for SPI, not I2C
 2019-08-26 09:13:39 +10:00
Andrew Tridgell 578e5dfdaa HAL_ChibiOS: add up i2c ISR count 2019-08-26 09:13:39 +10:00
Andrew Tridgell f8cfbb8062 HAL_ChibiOS: added ISR limit on I2C 
this will prevent any possibility of an I2C interrupt storm. This is
designed to address the most likely cause of #11642
 2019-08-25 17:12:16 +10:00
Andrew Tridgell 8080efbc6a HAL_ChibiOS: allow for blocking unbuffered uarts 
this is used by AP_IOMCU to avoid a race condition where the mutex is
busy on write() causing a zero-length write and delayed output
 2019-08-17 17:36:41 +10:00
Andrew Tridgell afc8a70ce4 HAL_ChibiOS: fixed a bug in wait_timeout() on UARTs 
wait_timeout() could return true on a read of less bytes than are
expected.
 2019-08-17 17:36:41 +10:00
Peter Barker 35c2406b17 AP_HAL_ChibiOS: add missing override keywords 
This was causing CubeOrange not to build
 2019-08-17 13:25:05 +10:00
Peter Barker 54b200a777 AP_HAL_ChibiOS: add missing uavcan-related override keywords 2019-08-14 16:33:29 +10:00
Andrew Tridgell 5e40921b42 HAL_ChibiOS: fixed reboot hold in bootloader 
thanks to Tom for noticing this
 2019-08-12 22:21:13 -07:00
Henry Wurzburg b6518b6b46 AP_HAL_ChiibOS: change omnibusf4 board type to be unique 2019-08-06 11:20:11 +10:00
Andrew Tridgell 4fca69c5e9 HAL_ChibiOS: renamed Pixhawk6 to Durandal 
new name for FC from Holybro
 2019-08-01 14:11:06 +10:00
Andrew Tridgell adcf9c4fa4 HAL_ChibiOS: added commented out baro on SPI5 for fmuv5 
useful for SPI debugging
 2019-07-29 10:09:08 +10:00
Andrew Tridgell 98f578394f HAL_ChibiOS: default OTG2 protocol to mavlink2 on most boards 
For boards that haven't yet had a driver update in MissionPlanner to
cope with the 2nd OTG interface this change makes both interfaces work
as MAVLink

This also fixes an issue with connecting under a windows VM within
vmware
 2019-07-26 21:58:57 +10:00
bugobliterator cba98096e9 HAL_ChibiOS: move to using hardcoded heater PWM polarity in iofirmware 2019-07-25 17:05:41 +10:00
Andrew Tridgell e57228646e HAL_ChibiOS: added unused CS pins for fmuv5 
these are needed to ensure SPI works correctly if the unused pins are
later attached to a device
 2019-07-19 16:58:10 +10:00
Andrew Tridgell 12dd33ac2b HAL_ChibiOS: added logging of hardware fault information in watchdog 
this may help trackdown software bugs that trigger hard faults
 2019-07-19 16:02:41 +10:00
Andrew Tridgell 2d5e4dcfa2 HAL_ChibiOS: fixed SemLine data in WDOG msg 
semline was being overwritten in the setup() call
 2019-07-15 08:08:54 +10:00
vierfuffzig bed92e8ca8 AP_HAL_ChibiOS: fix buzzer pin define on OMNIBUSF7V2 2019-07-13 17:26:43 +10:00
Andrew Tridgell 2f79639e36 HAL_ChibiOS: added support for MatekF765-Wing 2019-07-13 15:23:45 +10:00
reubenfinch cabd6aec8f AP_HAL_ChibiOS: Correct the README.md for fmuv5 boards 
the IST8310 magnetometer uses I2C, not SPI
 2019-07-12 10:59:48 +01:00
Andrew Tridgell 2f0a4ff1ab HAL_ChibiOS: fixed build on boards with less than max uarts 2019-07-12 17:01:21 +10:00
Andrew Tridgell 1919268801 HAL_ChibiOS: added OTG2 on all F7 and H7 boards with CAN 
allows for SLCAN on 2nd port
 2019-07-12 17:01:21 +10:00
Andrew Tridgell 02014776e8 HAL_ChibiOS: auto-set HAL_HAVE_DUAL_USB_CDC 2019-07-12 17:01:21 +10:00
Andrew Tridgell 0075b96f3a HAL_ChibiOS: added uartH 2019-07-12 17:01:21 +10:00
Siddharth Purohit dcf17e5bc2 HAL_ChibiOS: hwdef: add support for dual cdc on CubeYellow and CubeOrange 2019-07-12 17:01:21 +10:00
Siddharth Purohit 2f0d1336e6 HAL_ChibiOS: add support for dual usd cdc 2019-07-12 17:01:21 +10:00
anbello b65f5bf632 ChibiOS: hwdef revo-mini correct IMU rotation 2019-07-12 14:01:06 +10:00
Andrew Tridgell d2fe47d2e0 HAL_ChibiOS: dither heater pins to prevent magnetic impact 2019-07-12 12:46:27 +10:00
Andrew Tridgell b12cc57c64 HAL_ChibiOS: switched on fast sampling on IMU3 by default on hex cubes 
as some people are flying with EK2_IMU_MASK=7 this reduces the risk of
aliasing on IMU3
 2019-07-11 10:24:45 +10:00
Andrew Tridgell 3b0bd67afb HAL_ChibiOS: enable CAN on Pixhawk6 2019-07-08 12:19:20 +10:00
Siddharth Purohit 2f153a3577 HAL_ChibiOS: remove singleton interface from slcan_router 2019-07-08 12:18:29 +10:00
Siddharth Purohit 67c925865c HAL_ChibiOS: add support for CAN on STM32H7 boards 2019-07-08 12:18:29 +10:00
Peter Barker a61028c55d AP_HAL_ChibiOS: disable scripting if USE_FATFS=no 2019-07-08 09:55:46 +10:00
Andrew Tridgell 898150e460 HAL_ChibiOS: cope with calling delay_microseconds_boost() multiple times 
needed for updated IMU wait code
 2019-07-07 19:03:01 +10:00
Atxheli 7f3cb09da2 correct comment placement for second led 2019-07-04 08:36:33 +10:00
Hwurzburg a9783de61c correct include paths, uncomment alarm pin, fix conflict with rssi 2019-07-04 08:36:33 +10:00
Hwurzburg 3e3d7b8e7f Change to "include" style for new board, fix to allow LED to be used as status indicator 2019-07-04 08:36:33 +10:00
Hwurzburg 10838387c5 Split Omnibus F4 pro and non-pro into two boards to allow pro boards to have 8 pwm outputs 2019-07-04 08:36:33 +10:00
Alexey Kozin e5988f7153 AP_HAL_ChibiOS: fix voltage sensor connected to fmu adc 2019-07-02 06:42:11 +10:00
bugobliterator 7d4a758059 hwdef: fix default battery monitor pins for CubeOrange 2019-06-28 14:18:11 +10:00
Michael du Breuil a34ac14ec5 AP_HAL_ChibiOS: Make BOARD_FLASH_SIZE available at configure time 2019-06-18 00:06:32 -07:00
Peter Barker 1f4de871da AP_HAL_ChibiOS: return RC protocol being decoded 2019-06-18 11:35:38 +10:00
vierfuffzig 7780e8ed00 AP_HAL_ChibiOS: add support for AIO and OSD board types 
this allows init on board variant without onboard baro
 2019-06-18 10:10:22 +10:00
Andrew Tridgell 51e187342b HAL_ChibiOS: move the power control changes to be only CubeBlack 
This aims to fix #11455. I have been unable to reproduce the issue,
which leaves me thinking it is either a bootloader difference or a hw
difference between pixhawk1 clones and real pixhawk1 boards
 2019-06-09 16:56:14 +10:00
Siddharth Purohit a926effee5 hwdef: iomcu set pin mode to input for autodetecting heater control level 2019-06-08 14:31:01 +10:00
Lucas De Marchi e66de36016 HAL_ChibiOS: fix I2C transaction without stop condition 
Start using i2cSoftStop() instead of i2cStop() so the peripheral
continues to be enabled and with non-gated clock.  This allows time for
the I2C peripheral to continue the ack or stop.
 2019-06-06 09:27:47 -07:00
Andrew Tridgell 73bc277470 HAL_ChibiOS: fixed KakuteF7 build 
low on flash
 2019-06-06 12:19:13 +10:00
Andrew Tridgell 2acaada884 HAL_ChibiOS: fixed OMNIBUSF7V2 build 
ran out of flash for plane
 2019-06-06 12:19:13 +10:00
Andrew Tridgell bfdf857b34 HAL_ChibiOS: fixed airbotf4 build 2019-06-06 12:19:13 +10:00
Andrew Tridgell 614a059819 HAL_ChibiOS: convert more boards to using new sensor config system 2019-06-05 18:54:40 +10:00
Andrew Tridgell ff603a1f0b HAL_ChibiOS: convert mini-pix 2019-05-30 15:39:57 +10:00
Andrew Tridgell 4548aa162b HAL_ChibiOS: convert mindpx-v2 2019-05-30 15:39:57 +10:00
Andrew Tridgell 91aa49ba6f HAL_ChibiOS: convert matek boards 2019-05-30 15:39:57 +10:00
Andrew Tridgell fca03bef8d HAL_ChibiOS: convert F4BY 2019-05-30 15:39:57 +10:00
Andrew Tridgell 8605060dfc HAL_ChibiOS: convert F35Lightning 2019-05-30 15:39:57 +10:00
Andrew Tridgell 288d5d6fe6 HAL_ChibiOS: convert DrotekP3Pro 2019-05-30 15:39:57 +10:00
Andrew Tridgell d90b05f685 HAL_ChibiOS: convert all fmuv5 boards to sensor config system 2019-05-30 15:39:57 +10:00
Andrew Tridgell 03bb94599b HAL_ChibiOS: support I2C sensor probes by bus mask 2019-05-30 15:39:57 +10:00
Andrew Tridgell fc1ec8a465 HAL_ChibiOS: convert airbot to new config 2019-05-30 15:39:57 +10:00
Andrew Tridgell 82b171582e HAL_ChibiOS: added sensor config for cube varients 2019-05-30 15:39:57 +10:00
Andrew Tridgell c36d76c213 HAL_ChibiOS: convert Pixhawk1 to new sensor config 
saves 26k of flash, making 1M boards work for longer
 2019-05-30 15:39:57 +10:00
Andrew Tridgell eae852962e HAL_ChibiOS: fixed case of no IMU, BARO or COMPASS config settings 2019-05-30 15:39:57 +10:00
Andrew Tridgell 068e6ea8d2 HAL_ChibiOS: convert KakuteF4 and KakuteF7 to new sensor config 2019-05-30 15:39:57 +10:00
Andrew Tridgell 1b0bf88c8f HAL_ChibiOS: convert crazyflie2 to new config 2019-05-30 15:39:57 +10:00
Andrew Tridgell b47ab5c8a9 HAL_ChibiOS: support I2C sensor config in hwdef.dat 2019-05-30 15:39:57 +10:00
Andrew Tridgell ceb9c3b83e HAL_ChibiOS: convert mRoControlZeroF7 to new sensor config 2019-05-30 15:39:57 +10:00
Andrew Tridgell 5eb488303c HAL_ChibiOS: convert Pixracer to use new sensor config 2019-05-30 15:39:57 +10:00
Andrew Tridgell e198d552a8 HAL_ChibiOS: support IMU, COMPASS and BARO lines in hwdef.dat 
this allows for main sensors to be set in hwdef.dat, making adding new
boards simpler
 2019-05-30 15:39:57 +10:00
Phillip Kocmoud 734abe3d7d hwdef: Correct typo for mRo x2.1-777 USB PID 
This needed to match the firmware directory which contains the compiled binaries hosted at http://firmware.ardupilot.org so that MissionPlanner can automatically download and update firmware.
 2019-05-23 11:05:42 +10:00
Andrew Tridgell 59678840a8 HAL_ChibiOS: log SPI and I2C counters 2019-05-17 08:56:06 +10:00
Peter Barker f5190d1bcc AP_HAL_ChibiOS: use logger().WriteCritical(...) for WDOG message 2019-05-16 17:21:24 +10:00
Andrew Tridgell 0708b65c2d AP_HAL_ChibiOS: added const for PersistentData 2019-05-15 15:33:48 +10:00
Andrew Tridgell 48302427c7 HAL_ChibiOS: rename to EXPECT_DELAY_MS() 2019-05-15 15:33:48 +10:00
Andrew Tridgell a7eb85e1c5 HAL_ChibiOS: cope with nesting of expected_delay_ms() 2019-05-15 15:33:48 +10:00
Andrew Tridgell 8d0bca6ba9 HAL_ChibiOS: log mavlink IDs and semaphore lines for watchdog 
this gives a better chance of tracking down a hang
 2019-05-15 15:33:48 +10:00
Andrew Tridgell 1b8cbfc6a4 HAL_ChibiOS: use EXPECT_DELAY() macro 2019-05-15 15:33:48 +10:00
Andrew Tridgell d368d95aa7 HAL_ChibiOS: removed unusued AP_Common/Semaphore.h 2019-05-15 15:33:48 +10:00
Andrew Tridgell e3c80bf08f HAL_ChibiOS: fixed bootloader build 2019-05-15 15:33:48 +10:00
Andrew Tridgell d7a0eb42ee HAL_ChibiOS: added logging of watchdog data 
log MON msgs in the leadup to a watchdog, and log a WDOG message after
a watchdog reset
 2019-05-15 15:33:48 +10:00
Andrew Tridgell dbfe6b8019 HAL_ChibiOS: implement persistent_data for watchdog 
this is a much simpler approach to persistent data
 2019-05-15 15:33:48 +10:00
Andrew Tridgell 6333494d99 HAL_ChibiOS: disable peripheral power on boot on fmuv3 
then enable after 100ms, and let settle for 20ms. This is to fix an
issue with peripheral power on consistency with all fmuv3 boards

Thanks to Philip for the suggestion
 2019-05-11 18:45:18 +10:00
Andrew Tridgell ce9e9d8670 HAL_ChibiOS: end scheduler boost on expected delay 
we want timer thread to be higher priority than main thread while in a
long operation
 2019-05-11 05:56:34 +10:00
Phillip Kocmoud 16f1ec8ce2 HAL_ChibiOS: added missing AF functions for F777 2019-05-10 15:05:42 +10:00
Phillip Kocmoud 9709401595 HAL_ChibiOS: added hwdef for mRoControlZeroF7 2019-05-10 15:05:42 +10:00
Andrew Tridgell 2b0a30a2c5 HAL_ChibiOS: ensure we don't overflow bootloader area 
this modifies the ld script to use the maximum size available for the
bootloader, so we can't accidentially grow the bootloader beyond its
max size
 2019-05-06 12:36:41 +10:00
Andrew Tridgell 11021bbaa9 HAL_ChibiOS: fixed LEDs on new CUAVv5 revision 2019-05-03 16:32:00 +10:00
Andrew Tridgell 8d2f016cc8 HAL_ChibiOS: fixed LEDs on CUAVv5Nano 
need to be opendrain
 2019-05-03 16:32:00 +10:00
Peter Hall 26a6cccf21 AP_HAL_ChibiOS: KakuteF7 add two PWM pin options 2019-05-03 14:47:00 +10:00
Andrew Tridgell 4deb2c38f6 HAL_ChibiOS: fixed brick2 valid status in POWR flags for fmuv5 
and fixed sense of VBUS
 2019-05-03 10:32:41 +10:00
Jaaaky 464540ab56 AP_HAL_ChibiOS: tune delay for flashing bootloader 
As the function can internally loop for 10 seconds
 2019-05-01 14:23:20 +10:00
Andrew Tridgell f48d07ffca HAL_ChibiOS: added WARN_IF_UNUSED based on PR feedback 2019-04-30 10:16:38 +10:00
Andrew Tridgell ce9b75fdf0 HAL_ChibiOS: added timeouts on all SPI transfers 
this is never expected to trigger unless we have a severe MCU error as
SPI transfers don't rely on a response from a device.

The only case that we could get a timeout is when a bug leads to use
doing transfers from memory that does not support the DMA
transaction (such as on H7). This change turns that from a immediately
fatal lockup into a bus error and failed sensor
 2019-04-30 10:16:38 +10:00
Matt Lawrence f7383179e8 HAL CHIBIOS: Solo stock cube child of fmuv3 instead of CubeBlack 
CubeBlack-Solo hardware def to use FMUv3 as its parent rather than CubeBlack.  Since this older cube doesn't have the same hardware as a new CubeBlack, it is causing conflicts.  Nearly everything is the same.
 2019-04-29 11:14:46 +10:00
Michael du Breuil a4d9853f1d AP_HAL_ChibiOS: Actually enable the wrapper on remove 2019-04-26 08:07:19 +10:00
Jonathan Challinger 183b55d3df AP_HAL_ChibiOS: add define HAL_CHIBIOS_ARCH_CUBEBLACK to cubeblack hwdef 2019-04-24 11:45:14 +10:00
Andrew Tridgell 0461692ea5 HAL_ChibiOS: enable watchdog on IOMCU 2019-04-22 16:53:35 +10:00
Andrew Tridgell 352546c9f0 HAL_ChibiOS: removed unsafe ISR disable for bl update 
can't disable interrupts and call a fn that takes a mutex
 2019-04-22 16:53:35 +10:00
Andrew Tridgell 508aae8f2a HAL_ChibiOS: added save/restore of attitude in backup registers 2019-04-22 16:53:35 +10:00
Andrew Tridgell 730982b3c4 HAL_ChibiOS: fixed build with older gcc 2019-04-22 16:53:35 +10:00
Andrew Tridgell 2778a1b01e HAL_ChibiOS: save/restore home position in backup registers 
# Conflicts:
#	libraries/AP_HAL_ChibiOS/hwdef/common/stm32_util.c
 2019-04-22 16:53:35 +10:00
Andrew Tridgell f0f36c6237 HAL_ChibiOS: fixed watchdog timeout setting 2019-04-22 16:53:35 +10:00
Andrew Tridgell 3b5463f061 HAL_ChibiOS: allow for delay in bootloader flash 2019-04-22 16:53:35 +10:00
Andrew Tridgell 2476927048 HAL_ChibiOS: don't call internalerror for iomcu 2019-04-22 16:53:35 +10:00
Andrew Tridgell 63d21d995a HAL_ChibiOS: setup watchdog_reset internal error 2019-04-22 16:53:35 +10:00
Andrew Tridgell 9ca67dc811 HAL_ChibiOS: implement was_watchdog_armed() 2019-04-22 16:53:35 +10:00
Andrew Tridgell 1acb7e977f HAL_ChibiOS: added ability to restore safety state on watchdog reset 2019-04-22 16:53:35 +10:00
Andrew Tridgell 54cbf8ea9e HAL_ChibiOS: change to 2s timeout on watchdog 
a bit more of a safety net against false positives for stable release
 2019-04-22 16:53:35 +10:00
Andrew Tridgell 58aca561fd HAL_ChibiOS: fixed watchdog on H7 2019-04-22 16:53:35 +10:00
Andrew Tridgell 19526b5826 HAL_ChibiOS: implement scheduler->expect_delay_ms() 2019-04-22 16:53:35 +10:00
Andrew Tridgell 8100c71a96 HAL_ChibiOS: added commented out test code for watchdog 2019-04-22 16:53:35 +10:00
Andrew Tridgell 03886f241e HAL_ChibiOS: implement was_watchdog_reset() 2019-04-22 16:53:35 +10:00
Andrew Tridgell a5309b3afa HAL_ChibiOS: record reason for reset 
allows us to tell if reset was due to watchdog
 2019-04-22 16:53:35 +10:00
Andrew Tridgell 272c277056 HAL_ChibiOS: use BRD_OPTIONS to enable watchdog 2019-04-22 16:53:35 +10:00
Andrew Tridgell c09df1ea7b HAL_ChibiOS: added IWDG watchdog support 
this resets the MCU if the main loop stops for 1 second
 2019-04-22 16:53:35 +10:00
Michael du Breuil b0f4611ddc AP_HAL_ChibiOS: Fix python3 with F7 builds 2019-04-20 12:33:44 +10:00
Randy Mackay 69882d9898 AP_HAL_ChibiOS: fix Pixhawk4 readme 2019-04-17 09:08:41 +09:00
Peter Barker 3c3b12ba77 AP_HAL_ChibiOS: Bitmask is now a template 2019-04-16 15:12:07 +10:00
Andrew Tridgell 967c6462cb HAL_ChibiOS: rename Pixhawk4Pro to Pixhawk6 2019-04-16 04:33:17 +10:00
Andrew Tridgell 32ebd2080f HAL_ChibiOS: mark SDIO and SDMMC IO as pullup 
this is needed for boards such as PixhackV3 which don't have hardware
pullups. Thanks to Hongle for reporting this.
 2019-04-12 19:44:00 +10:00
Andrew Tridgell 006583d812 HAL_ChibiOS: fixed iomcu build with flash driver 2019-04-11 13:22:53 +10:00
Andrew Tridgell 7c726b2f42 HAL_ChibiOS: use hal.flash API 2019-04-11 13:22:53 +10:00
Andrew Tridgell 36f7116054 HAL_ChibiOS: implement flash driver 2019-04-11 13:22:53 +10:00
Andrew Tridgell a767c15986 HAL_ChibiOS: change CUAVv5Nano default PWM count to 11 2019-04-08 08:21:39 -07:00
Andrew Tridgell c6637fbe38 HAL_ChibiOS: fixed CUAVv5Nano uarts 2019-04-08 08:21:39 -07:00
Andrew Tridgell ce4abf8dcb HAL_ChibiOS: support for CUAVv5Nano board 
F765 with no IOMCU
 2019-04-08 08:21:39 -07:00
Andrew Tridgell edd793c152 HAL_ChibiOS: fixed fallback to microSD for storage 
this is used when FRAM fails on a board with microSD support. The
double init caused the validate() in the FATFS code to fail
 2019-04-07 13:37:57 +10:00
Andrew Tridgell d59cf15594 HAL_ChibiOS: enable heater pin on Pixhawk4Pro 2019-04-06 10:08:39 +11:00
Siddharth Purohit 7b54103271 HAL_ChibiOS: set pwm select pins high for 3.3V PWMout on startup 2019-04-01 21:30:12 +11:00
Siddharth Purohit 051842ea34 HAL_ChibiOS: add support for PWM Voltage level selection on CubeYellow and CubeOrange 2019-04-01 21:30:12 +11:00
Tom Pittenger 91b0650765 AP_HAL_ChibiOS: rename dataflash to logger 2019-03-28 16:40:58 +11:00
Andrew Tridgell 591e2ebeea HAL_ChibiOS: remove unused config files 
these do not build correctly
 2019-03-15 20:08:26 +11:00
Andrew Tridgell d942b64584 HAL_ChibiOS: fixed NucleoH743 build 2019-03-15 20:08:26 +11:00
Andrew Tridgell bf0a4a23b2 HAL_ChibiOS: fixed build of crazyflie2 2019-03-15 20:08:26 +11:00
Andrew Tridgell b754d56ecb HAL_ChibiOS: fixed revo-mini build 2019-03-15 11:54:57 +11:00
Andrew Tridgell 69edd5a544 HAL_ChibiOS: fixed typos in hwdef.dat files 2019-03-15 11:54:57 +11:00
Andrew Tridgell cd27e3022f HAL_ChibiOS: check for prefix match on peripherals 2019-03-15 11:54:57 +11:00
Andrew Tridgell 3fd3e88d04 HAL_ChibiOS: fixed typo 
thanks to Malcolm Churn for noticing
 2019-03-15 08:51:52 +11:00
Andrew Tridgell b3f48a1477 HAL_ChibiOS: added CS line for Pixhawk4Pro temp sensor 2019-03-14 16:10:40 +11:00
Andrew Tridgell 2842063146 HAL_ChibiOS: optimize CubeYellow build 
and fixed comment in CubeOrange
 2019-03-11 12:40:21 +11:00
Andrew Tridgell 59652ad147 HAL_ChibiOS: added more IMU devices for Hex Cube boards 2019-03-11 12:40:21 +11:00
Andrew Tridgell 7577ebb33e HAL_ChibiOS: added bootloader hwdef for mindpx-v2 2019-03-11 09:58:12 +11:00
Andrew Tridgell f7b6f9d70b HAL_ChibiOS: added retries to flash based storage 
this prevents a single flash write error from causing parameter reset
 2019-03-11 09:52:19 +11:00
Andrew Tridgell 63895d8b0c HAL_ChibiOS: setup dummy pointers for H7 SPI 2019-03-10 21:53:06 +11:00
Andrew Tridgell 1414988870 HAL_ChibiOS: use spiSend/spiReceive 
this fixes an issue with microSD on F405.
 2019-03-10 21:53:06 +11:00
Andrew Tridgell 26d1371d25 HAL_ChibiOS: separate out DMA allocation for sdcard IO 
this fixes an issue with DMA to SPI6 on STM32H7. On the H7 SRAM4 can
be used for DMA and BDMA to all devices except for SDMMC which uses
IDMA.

by separating out DMA of sdcard data from other data we can arrange
for DMA to all devices to work
 2019-03-09 07:33:47 +11:00
Andrew Tridgell a7c91d1cb4 HAL_ChibiOS: show all SPI clocks 2019-03-09 07:33:47 +11:00
Siddharth Purohit fef81b6381 HAL_ChibiOS: add support for new main sensors 2019-03-06 20:47:10 +11:00
Andrew Tridgell 160de969a5 HAL_ChibiOS: simplify H7 clock tree setup 
and push more peripherals to max of 100MHz
 2019-03-04 21:42:07 +11:00
Andrew Tridgell 5bcfe41d1f HAL_ChibiOS: push H7 clock to 400MHz 2019-03-04 19:38:06 +11:00
Andrew Tridgell a59e1d0e0f HAL_ChibiOS: fixed H7 dma sharing between BDMA and DMA 
the BDMA and DMA controllers have separate namespaces for streams, so
we can allocate a lot more streams than we were
 2019-03-02 20:50:59 +11:00
Andrew Tridgell c7ca6d77c7 HAL_ChibiOS: H7 doesn't need a DMA mapping for SDMMC 
it uses a dedicated internal DMA controller in the SDMMC peripheral
 2019-03-02 20:50:59 +11:00
Andrew Tridgell 6f07d804b9 HAL_ChibiOS: adjust Pixhawk4Pro VBUS and DMA priority 2019-03-02 20:50:59 +11:00
Andrew Tridgell 603d9f6907 HAL_ChibiOS: fixed typo in ITCM base address 2019-03-02 09:01:20 +11:00
Andrew Tridgell 4c12ba4c2c HAL_ChibiOS: fixed SDMMC IRQ priority 2019-03-01 11:39:27 +11:00