Andrew Tridgell
7b67146bc4
HAL_ChibiOS: use less memory in SoftSigReader
2018-10-17 15:11:28 +11:00
Andrew Tridgell
d083cd87d6
HAL_ChibiOS: disable debug code by default for iomcu
...
use --enable-asserts instead
2018-10-17 15:11:28 +11:00
Andrew Tridgell
d7aaaa35bd
HAL_ChibiOS: disable RCIN and timer threads for iomcu
2018-10-17 15:11:28 +11:00
Andrew Tridgell
8a4e0bd58c
HAL_ChibiOS: fixed RCIN for iomcu
...
we need to disable/re-enable DMA on each IRQ for the STM32F10x
2018-10-17 15:11:28 +11:00
Andrew Tridgell
15141a6a5a
HAL_ChibiOS: allow for no RCIN or TIMER thread
...
saves memory on iomcu
2018-10-17 15:11:28 +11:00
Andrew Tridgell
4674a1c68d
HAL_ChibiOS: fixed system time for clocks other than 1MHz
...
needed for IOMCU
2018-10-17 15:11:28 +11:00
Andrew Tridgell
298a91ac7c
HAL_ChibiOS: allow reduction of memory for SoftSigReader
...
for IOMCU
2018-10-17 15:11:28 +11:00
rain-er
565b370330
UART4 added for BLHeli ESC telemetry
2018-10-17 13:57:19 +11:00
Andrew Tridgell
4416404137
HAL_ChibiOS: removed hal.util->new_semaphore()
...
replaced with HAL_Semaphore
2018-10-17 12:54:22 +11:00
Phillip Kocmoud
f1d223a32a
HAL_ChibiOS: Add support for the mRo X2.1-777
...
a new flight controller from Mayan Robotics based on the x2.1 upgraded to a STM32F777 MCU
2018-10-16 09:37:39 +11:00
vierfuffzig
2243c524db
Chibios: Add board FuriousFPV F35Lightning
2018-10-12 20:28:50 +11:00
Andrew Tridgell
bcc1bd9752
HAL_ChibiOS: added realloc implementation
...
needed for AP_Scripting
2018-10-09 10:08:52 +11:00
Michael du Breuil
8382d377bd
AP_HAL_ChibiOS: Add a BUFSIZ value
2018-10-09 10:08:52 +11:00
Michael du Breuil
11ab6c59e1
AP_HAL_ChibiOS: Handle scripting priority
2018-10-09 10:08:52 +11:00
Randy Mackay
c1ab3afb6c
AP_HAL_ChibiOS: fix safety switch option handling
2018-10-04 16:13:24 +10:00
Andrew Tridgell
8c391291a3
HAL_ChibiOS: fixed a race in DShot code
...
this fixes a problem found by Daniel Met with the copter 3.6 beta
release
2018-10-03 15:28:07 +10:00
Michael du Breuil
9a48a0835e
AP_HAL_ChibiOS: Don't redefine errno
2018-10-03 08:01:13 +10:00
Michael du Breuil
f810b7b9f6
AP_HAL_ChibiOS: Make getcwd() take size_t as per the standard
2018-10-02 06:04:40 +10:00
Michael du Breuil
7fda309d3c
AP_HAL_ChibiOS: Remap unused pins to ADC
2018-09-20 01:07:47 +01:00
Siddharth Purohit
8ac38d73f7
HAL_ChibiOS: add option for NO_FASTBOOT build and enable it for iomcu
2018-09-19 12:14:15 +10:00
Siddharth Purohit
6622c9b8fd
HAL_ChibiOS: wrap sscanf and snprintf methods
2018-09-19 12:14:15 +10:00
Siddharth Purohit
05539cd93b
HAL_ChibiOS:remove print statement left over from previous changes
2018-09-19 12:14:15 +10:00
Siddharth Purohit
2d1153081c
HAL_ChibiOS: do not build float support for bootloader builds
2018-09-19 12:14:15 +10:00
Siddharth Purohit
f9149f45b2
HAL_ChibiOS: explicitly mention if RTC not available
2018-09-19 12:14:15 +10:00
Siddharth Purohit
22f74b0827
HAL_ChibiOS: add option to set iomcu firmware environment var
2018-09-19 12:14:15 +10:00
Siddharth Purohit
42b4730d88
HAL_ChibiOS: add changes to hwdef to support STM32F1 based controller
2018-09-19 12:14:15 +10:00
Siddharth Purohit
1a20fb4ea9
HAL_ChibiOS: disable flash methods where there is no Flash API support
2018-09-19 12:14:15 +10:00
Siddharth Purohit
847aca3c30
HAL_ChibiOS: reduce signal transitions count to save RAM
2018-09-19 12:14:15 +10:00
Siddharth Purohit
b9319cae56
HAL_ChibiOS: disable segments relating to unused features
2018-09-19 12:14:15 +10:00
Siddharth Purohit
87a2dea9d4
HAL_ChibiOS: disable features that require advanced dma
2018-09-19 12:14:15 +10:00
Siddharth Purohit
0f07480faf
HAL_ChibiOS: continue main_loop branching from main instead of allocating a separate thread
2018-09-19 12:14:15 +10:00
Siddharth Purohit
e824a9c360
HAL_ChibiOS: add hwdef files to support IOMCU
2018-09-19 12:14:15 +10:00
Andrew Tridgell
340f1b43e6
HAL_ChibiOS: fixed RSSI voltage from IOMCU
2018-09-15 16:08:32 +10:00
Andrew Tridgell
8c33b4b97d
HAL_ChibiOS: implement set_failsafe_pwm()
2018-09-13 08:15:02 +10:00
Andrew Tridgell
490d6eea20
HAL_ChibiOS: fixed ADC bug
...
this caused bad analog readings when the number of channels being read
was more than the number of hw channels
thanks to @vierfuffzig for reporting!
2018-09-12 07:10:04 +10:00
s0up
066cf90111
HAL_ChibiOS: Add speedybee hardware definition
2018-09-07 08:33:35 +10:00
Paul Atkin
bb99165221
HAL_ChibiOS: updates for KakuteF7
...
fixed PWM and added full tonealarm support
2018-09-06 10:11:34 +10:00
Andrew Tridgell
a9e29f7556
HAL_ChibiOS: added pullup/pulldown support on GPIO
...
using the convention of write() on an input pin to set pullup/pulldown
2018-09-06 07:20:46 +10:00
Michael du Breuil
f6cb196d53
AP_HAL_ChibiOS: Remove unimplemented force_safety_no_wait()
...
ChibiOS doesn't implement the method, so there is nothing to be gained
by calling the function.
2018-09-04 10:23:18 +10:00
Hannes Verschore
fefde53d58
AP_HAL_ChibiOS: Fix comment in Device.cpp
...
This was decreased to 100 in b07c599bf2
. I assume it would be best to also update the comment.
2018-08-31 08:36:47 +09:00
Andrew Tridgell
8c962e6f0f
HAL_ChibiOS: use a larger TX buffer on USB
...
this is needed for fast log download on vehicles with 50Hz main loop
2018-08-28 08:50:50 +10:00
Andrew Tridgell
33076be585
HAL_ChibiOS: fixed handling of 16 bit timers
...
when we have a 16 bit timer then systime_t is 16 bit, and we need to
handle wrap of get_systime_us32()
2018-08-26 18:34:26 +10:00
Andrew Tridgell
dc20e2baed
HAL_ChibiOS: support recursive semaphores
2018-08-25 15:44:36 +10:00
Andrew Tridgell
db9a8f16ed
HAL_ChibiOS: enable terrain on Pixracer, minpx-v2 and mini-pix
2018-08-24 19:43:27 +10:00
Andrew Tridgell
5526dac4fc
HAL_ChibiOS: probe all i2c baros for revo-mini
...
this ensures we build this functionality in CI
2018-08-23 13:29:59 +10:00
Peter Barker
2209e4a697
AP_HAL_ChibiOS: new HAL functor-based methods
...
AP_HAL_ChibiOS: adjust for irq-type enumeration change
AP_HAL_ChibiOS: implement attach-AP_HAL::Proc to interrupt interface
2018-08-21 20:34:01 +09:00
Andrew Tridgell
d3af854949
HAL_ChibiOS: fixed bootloader build
2018-08-16 12:40:10 +10:00
Andrew Tridgell
dabdb969f6
HAL_ChibiOS: added support for HAL_Semaphore type
2018-08-16 12:40:10 +10:00
Alexander Malishev
05099b8b8b
HAL_ChibiOS: restore default dataflash buffer size
...
This fix log corruption in copter
2018-08-15 10:15:09 +10:00
Francisco Ferreira
1b46104a98
AP_HAL_ChibiOS: fix warning when STDOUT is defined
...
../../libraries/AP_HAL_ChibiOS/UARTDriver.cpp:118:12: warning: 'int hal_console_vprintf(const char*, va_list)' defined but not used [-Wunused-function]
static int hal_console_vprintf(const char *fmt, va_list arg)
^
2018-08-14 10:17:38 +10:00
mirkix
c33b692f53
AP_HAL_ChibiOS: fix CubeYellow build
2018-08-14 06:26:22 +10:00
Francisco Ferreira
7278af05e0
AP_HAL_ChibiOS: remove CAN thread management
2018-08-12 13:35:01 +01:00
Francisco Ferreira
e1bf89f32d
AP_HAL_ChibiOS: fix CAN manager initialization
2018-08-12 13:35:01 +01:00
Andrew Tridgell
385f735799
HAL_ChibiOS: avoid 64 bit maths in AP_HAL::micros()
...
this saves a few cycles
2018-08-08 21:24:49 +10:00
vierfuffzig
bc52d430f9
Chibios add bootloader for mini-pix
2018-08-07 07:09:39 +10:00
Andrew Tridgell
846418e5e9
HAL_ChibiOS: raise timer thread priority
...
needs to be above main for guaranteed DShot and oneshot output periods
2018-08-06 11:41:42 +10:00
Andrew Tridgell
3df2a1c228
HAL_ChibiOS: fixed dshot bad frames
...
adding a pre-bit on the DMAR, and ensuring that all groups are setup
for DMA together fixes the remaining bad frames reports in BLHeli32
2018-08-04 19:29:13 +10:00
Andrew Tridgell
946b4db0e6
HAL_ChibiOS: set min dshot separation to 100usec
...
this fixes a problem with BLHeli32 not recognising dshot
2018-08-04 19:29:13 +10:00
Andrew Tridgell
22ba9a0aea
HAL_ChibiOS: fixed timeout of serial read bytes
...
this allows for fast timeout of serial read bytes in BLHeli pass-thru
2018-08-04 19:29:13 +10:00
Lucas De Marchi
668c941717
Global: use new version of ARRAY_SIZE
2018-08-04 15:31:55 +10:00
utkinpol
2912e732b4
HAL_ChibiOS: updated for KakuteF7
2018-08-04 08:24:49 +10:00
Andrew Tridgell
64c8ca514c
HAL_ChibiOS: fixed attach_interrupt check
...
we can't have two handlers on the same pad
2018-08-03 13:44:59 +10:00
Andrew Tridgell
4e6ac85057
HAL_ChibiOS: use 32 bit time intervals
...
this makes for smaller and faster code. We really don't need 64 bit
intervals as long sleeps are done with a loop.
2018-08-03 13:44:59 +10:00
Andrew Tridgell
1bd0ea079b
HAL_ChibiOS: fixed build on older compilers
...
allow build with gcc 4.9.x
2018-08-03 13:44:59 +10:00
Andrew Tridgell
7aba99e229
HAL_ChibiOS: fixes for ChibiOS version update
2018-08-03 13:44:59 +10:00
Andrew Tridgell
f8e2edbc7f
HAL_ChibiOS: fixed cache flush for updated ChibiOS version
2018-08-03 13:44:59 +10:00
Siddharth Purohit
2604b00b43
HAL_ChibiOS: use ch.h header for oslib api
2018-08-03 13:44:59 +10:00
Siddharth Purohit
ff65487ab3
HAL_ChibiOS: follow updated gpio pin setup procedure
2018-08-03 13:44:59 +10:00
Siddharth Purohit
5f88163e17
HAL_ChibiOS: update configuration and rtlib headers for ChibiOS 18.x.x
2018-08-03 13:44:59 +10:00
Siddharth Purohit
395c48933c
HAL_ChibiOS: move tto using updated time conversion API
2018-08-03 13:44:59 +10:00
Siddharth Purohit
4e8d072d6d
HAL_ChibiOS: move to using recent pal driver api for GPIO IRQ events
2018-08-03 13:44:59 +10:00
Mark Whitehorn
86b7adf68f
AP_HAL_Chibios: fix fmuv3/hwdef.dat printf/STDOUT description and clean up
2018-08-03 13:08:37 +10:00
Lucas De Marchi
20778f73f1
AP_HAL_ChibiOS: define HAL_HAVE_SAFETY_SWITCH accordingly
2018-08-02 13:15:02 -07:00
Andrew Tridgell
13f96bcb00
HAL_ChibiOS: fixed an i2c dma callback bug
...
many thanks to Kelly-Foster for chasing me on this one!
2018-08-02 12:29:02 +10:00
Andrew Tridgell
b0badf8caf
HAL_ChibiOS: fixes for F745 builds
2018-08-02 11:56:33 +10:00
Andrew Tridgell
44fd85ff29
HAL_ChibiOS: reduce memory used by serial buffers
...
this does not appear to affect log download speed. It saves about 27k
of memory
2018-08-01 13:11:16 +10:00
Hwurzburg
19f44f80ad
HAL_ChibiOS: Added Omnibus F4 NanoV6 (only V6)
...
bench tested all ports
2018-07-30 19:32:29 +10:00
Andrew Tridgell
4026b9f49d
HAL_ChibiOS: probe all external compasses on mini-pix
2018-07-30 17:26:19 +10:00
Andrew Tridgell
c83567dcba
HAL_ChibiOS: added duration to toneAlarm_set_buzzer_tone
2018-07-30 14:02:12 +10:00
Jonathan Challinger
f5f6220283
AP_HAL_ChibiOS: reflect changes to AP_HAL tonealarm interface
2018-07-30 14:02:12 +10:00
Andrew Tridgell
72ee20c590
HAL_ChibiOS: added RC input for OMNIBUSF7V2
2018-07-30 10:45:55 +10:00
Timothy Knab
d4c19ebc3c
HAL_ChibiOS: Updated OMNIBUSF7V2
...
Compasses on the I2C bus are now detected properly and GPS on UART3 works.
2018-07-30 10:45:55 +10:00
Andrew Tridgell
95aaa01014
HAL_ChibiOS: override COMPASS_AUTO_ROT on several boards
2018-07-28 18:05:12 +10:00
Andrew Tridgell
1eef29e525
HAL_ChibiOS: only set freq on valid IO channels
2018-07-28 15:25:57 +10:00
Andrew Tridgell
2174c53eb6
HAL_ChibiOS: added Pixhawk1 build target
...
this is more obvious to users than fmuv3
2018-07-27 10:02:31 +10:00
Alexander Malishev
1377943eb3
HAL_ChibiOS: fix DTCM size in stm32f745 mcu
2018-07-26 17:52:37 +10:00
Andrew Tridgell
8a26ca1ddf
HAL_ChibiOS: added a DMA reserve heap
...
this ensures we keep some DMA-capable memory aside for when it is
needed
2018-07-20 15:48:21 +10:00
Siddharth Purohit
f9ab7e54d4
HAL_ChibiOS: increase sigread buffer size for protocols with longer length
2018-07-20 15:47:18 +10:00
Andrew Tridgell
73cfd40e7f
HAL_ChibiOS: reduce latency of DMA sharing
...
if we are sharing a DMA channel between i2c and SPI then this saves
latency on SPI by giving up the DMA channel between retries
2018-07-20 14:51:18 +10:00
Andrew Tridgell
4244daeb2d
HAL_ChibiOS: support playing tunes by string
2018-07-20 14:37:16 +10:00
Andrew Tridgell
ec97e7772d
HAL_ChibiOS: rename f4by-ch to F4BY
2018-07-18 21:24:11 +10:00
Alexander Malishev
f265d7e128
AP_Bootloader: add f4by bootloader
2018-07-18 21:10:39 +10:00
Andrew Tridgell
caa553e727
HAL_ChibiOS: fixed internal i2c mask for Pixracer
2018-07-18 12:04:01 +10:00
Andrew Tridgell
59aab9987e
HAL_ChibiOS: account for I2C base in compass masks
2018-07-18 12:04:01 +10:00
Alexander Malishev
4342dae065
HAL_ChibiOS: define BOARD_RSSI_ANA_PIN to simpify tuning
2018-07-16 08:29:49 +10:00
Alexander Malishev
e04f438ce3
HAL_ChibiOS: fix analog pins on MatekF405
2018-07-16 08:29:49 +10:00
Alexander Malishev
89f7d652e0
HAL_ChibiOS: removed wrong led pin
2018-07-16 08:29:49 +10:00
Andrew Tridgell
9ab55f6838
HAL_ChibiOS: probe for external compasses on several boards
...
boards that have no internal compass will now probe for all external
compass types
2018-07-14 17:51:50 +10:00
Andrew Tridgell
476bddd9a3
HAL_ChibiOS: use HAL_I2C_INTERNAL_MASK
2018-07-14 17:51:50 +10:00
Andrew Tridgell
7eabee04a3
HAL_ChibiOS: enable OSD on KakuteF7
2018-07-13 14:53:53 +10:00
Andrew Tridgell
b96f24c80e
HAL_ChibiOS: added KakuteF7
...
thanks to Huibean for the fixes!
2018-07-13 14:53:53 +10:00
Andrew Tridgell
f2d602690e
HAL_ChibiOS: fixed build error with some compilers
2018-07-13 08:50:46 +10:00
Andrew Tridgell
83f38d536e
HAL_ChibiOS: fixed flow control auto-detect without DMA
...
this fixes automatic flow control detection when we are not using DMA
for TX
2018-07-13 07:34:30 +10:00
Andrew Tridgell
0201893f7c
HAL_ChibiOS: fixed peripheral power-up on fmuv5
...
we need to do the powerup before we initialise the UARTs
2018-07-13 07:34:30 +10:00
Andrew Tridgell
409e857f6b
HAL_ChibiOS: use pullup on CTS line
...
this makes life less difficult for SiK radios which go into bootloader
mode on low CTS
2018-07-13 07:34:30 +10:00
Andrew Tridgell
11e09a846c
HAL_ChibiOS: setup RTS pins as pullup
...
this prevents RTS pins from keeping SiK radios in bootloader mode on
peripheral powerup
2018-07-13 07:34:30 +10:00
Andrew Tridgell
63a0a4979c
HAL_ChibiOS: delay peripheral power on for fmuv5
...
this should prevent SiK radios staying in the bootloader
2018-07-13 07:34:30 +10:00
Michael du Breuil
6fba374069
AP_HAL_ChibiOS: Remove GPIO::analogPinToDigitalPin()
2018-07-11 23:09:52 -07:00
Andrew Tridgell
f083b80700
HAL_ChibiOS: added preallocation of DMA bouncebuffers
...
we need 512 bytes for microSD
2018-07-12 14:34:04 +10:00
Andrew Tridgell
e193a161f2
HAL_ChibiOS: enable SDIOv1 bouncebuffers
2018-07-12 14:34:04 +10:00
Andrew Tridgell
f84424cca4
HAL_ChibiOS: added specific builds for the Pixracer and mRoX21 boards
2018-07-12 12:33:32 +10:00
Andrew Tridgell
721f5d86b1
HAL_ChibiOS: fixed mRoX21 IMU setup
2018-07-12 12:33:32 +10:00
Andrew Tridgell
0310bd468c
HAL_ChibiOS: changed uart order for KakuteF4
...
thanks to feedback from Arther
2018-07-12 11:50:10 +10:00
Andrew Tridgell
50f7e55f0b
HAL_ChibiOS: don't clear buffers if no baudrate change
2018-07-12 11:41:31 +10:00
fnoop
374c46bd57
HAL_ChibiOS: MatekF405-Wing UART reorder
2018-07-11 16:26:04 -07:00
Andrew Tridgell
1f2c24ef7b
HAL_ChibiOS: backup storage to microSD if possible
...
very useful for diagnostics.
This also fixes a bug on boards with flash storage, to not switch to
microSD storage if flash storage available
2018-07-11 16:38:03 +10:00
fnoop
922a9762df
HAL_ChibiOS: Fix MatekF405-Wing default compass rotation
2018-07-11 10:10:34 +10:00
Andrew Tridgell
2d8dbc05d0
HAL_ChibiOS: fixed omnibusf4pro I2C
...
many thanks to Kelly-Foster and @sh83
2018-07-11 08:33:49 +10:00
Andrew Tridgell
fff4b3b4a0
HAL_ChibiOS: fixed build on some F4 boards
2018-07-11 07:24:39 +10:00
Andrew Tridgell
ece10082e2
HAL_ChibiOS: added separate builds for Pixhawk4 and CUAVv5
...
this makes it easier to distinguish boards in logs, plus makes life
easier when the user is selecting the right firmware.
It also gives us the flexibility to make parameter changes as needed
2018-07-10 18:29:14 +10:00
Andrew Tridgell
b647dde28f
HAL_ChibiOS: changed which I2C bus is internal on fmuv5
...
match PH4 arrangement
2018-07-10 18:29:14 +10:00
Andrew Tridgell
385713abdd
HAL_ChibiOS: support for PH4-mini board
2018-07-10 18:29:14 +10:00
Andrew Tridgell
63a9b903ba
HAL_ChibiOS: added fallback to microSD for param storage
...
useful for boards without flash sectors setup in bootloader for
storage, but can use microSD
2018-07-10 15:41:44 +10:00
Andrew Tridgell
5d8b4c1e23
HAL_ChibiOS: ensure system_id is nul terminated
2018-07-10 15:40:08 +10:00
Andrew Tridgell
4f9bd50038
HAL_ChibiOS: implement I2C bus masks
2018-07-10 15:39:47 +10:00
Andrew Tridgell
3292abaa19
HAL_ChibiOS: fixed F412 build
2018-07-10 11:48:06 +10:00
Randy Mackay
af6c5ebda1
AP_HAL_ChibiOS: reduce default BRD_PWM_COUNT to 4 for fmv3
...
also default relay pins to use aux out 5 and 6
2018-07-10 05:30:05 +10:00
Andrew Tridgell
a7d9f4eef7
HAL_ChibiOS: don't add defaults.parm when building bootloader
2018-07-09 20:59:51 +10:00
Andrew Tridgell
fd02865a8b
HAL_ChibiOS: use wildcard ROMFS name for fonts
2018-07-09 19:41:56 +10:00
Andrew Tridgell
27c435e217
HAL_ChibiOS: use compressed ROMFS for bootloader update
2018-07-09 19:41:56 +10:00
Andrew Tridgell
a489c93001
HAL_ChibiOS: removed restriction on delay in threads
...
threads other than the main thread should be able to sleep, but not
call the delay callback
2018-07-09 19:41:18 +10:00
Andrew Tridgell
df3ce87e02
HAL_ChibiOS: implement thread_create()
2018-07-09 19:41:18 +10:00
Andrew Tridgell
847cb760b4
HAL_ChibiOS: fixed fmuv4-beta hwdef for dup pin
2018-07-06 10:21:12 +10:00
Andrew Tridgell
bf6906819d
HAL_ChibiOS: fixed configure of cube-red
2018-07-06 10:21:12 +10:00
Alexander Malishev
7a3eb69818
HAL_ChibiOS: allow arm without compass on omnibusf4pro
2018-07-06 09:04:50 +10:00
Andrew Tridgell
fbf24f0492
HAL_ChibiOS: make serial number match HAL_PX4
2018-07-06 09:02:11 +10:00
Andrew Tridgell
840362f355
HAL_ChibiOS: fixed default revo compass orientation
2018-07-05 19:43:12 +10:00
Andrew Tridgell
15ee9593b5
HAL_ChibiOS: fixed duplicate pin definitions
...
thanks to @liang-tang for noticing
2018-07-05 12:07:55 +10:00
Andrew Tridgell
53dcf5bef8
HAL_ChibiOS: fixed build warning with MATEKF405
2018-07-05 11:48:40 +10:00
Andrew Tridgell
5c2c5efc35
HAL_ChibiOS: rename to CubeYellow
2018-07-05 07:53:48 +10:00
Andrew Tridgell
f289c71b89
HAL_ChibiOS: make CubeOrange IDs consistent with CubeBlack
2018-07-05 07:53:48 +10:00
Andrew Tridgell
47fec1859b
HAL_ChibiOS: rename cube-orange to CubeOrange
2018-07-05 07:53:48 +10:00
proficnc
5519986848
HAL_ChibiOS: Added CubeBlack hwdef
2018-07-05 07:53:48 +10:00
Andrew Tridgell
d3bc281a10
HAL_ChibiOS: use generic ROMFS embedding system
2018-07-02 10:43:48 +10:00
Andrew Tridgell
8ba137bd9a
waf: moved ROMFS embed script into waf folder
2018-07-02 10:43:48 +10:00
Andrew Tridgell
e5435e02ad
HAL_ChibiOS: report system ID in mavlink and logs
2018-06-29 20:27:36 +10:00
Andrew Tridgell
ca3beb88b7
HAL_ChibiOS: allow for telem1 and telem2 for bootloader on fmuv3
2018-06-29 08:17:38 +10:00
Andrew Tridgell
6cf205bdbe
HAL_ChibiOS: make sure we populate up to uartG
2018-06-29 08:17:38 +10:00
Andrew Tridgell
dd059b89f3
HAL_ChibiOS: added uartG for fmuv4 and fmuv5
2018-06-29 08:17:38 +10:00
Andrew Tridgell
0a5d287326
HAL_ChibiOS: support uartG
2018-06-29 08:17:38 +10:00
Andrew Tridgell
963675689c
HAL_ChibiOS: fixed substitution of %BOARD%-BL
2018-06-28 11:35:13 +10:00
Andrew Tridgell
54dc67e2a9
HAL_ChibiOS: default bootloader product string to XX-BL
2018-06-28 11:35:13 +10:00
Andrew Tridgell
946d0208e5
HAL_ChibiOS: fixed stm32f7 cache bug in erase flash page
2018-06-28 11:35:13 +10:00
Andrew Tridgell
d183efa720
HAL_ChibiOS: fixed USB string of fmuv5 bootloader
2018-06-28 11:35:13 +10:00
Andrew Tridgell
2b7b499c63
HAL_ChibiOS: added support for RTC sig for fast boot
2018-06-28 11:35:13 +10:00
Andrew Tridgell
f7f9d2b0e7
HAL_ChibiOS: added fmuv4 bootloader hwdef-bl.dat
2018-06-28 11:35:13 +10:00
Andrew Tridgell
3a5b3b4b1b
HAL_ChibiOS: fixed adding bootloader to ROMFS
2018-06-28 11:35:13 +10:00
Peter Barker
e332bece0f
AP_HAL_ChibiOS: embed any bootloader found for a board
2018-06-28 11:35:13 +10:00
Peter Barker
a81b3c8a7c
AP_HAL_ChibiOS: specify bootloader for sparky2
2018-06-28 11:35:13 +10:00
Peter Barker
f07b6f3d78
AP_HAL_ChibiOS: add support for flashing bootloader
2018-06-28 11:35:13 +10:00
Andrew Tridgell
10533fb249
HAL_ChibiOS: enable OSD font on OMNIBUSF7V2
2018-06-27 14:55:00 +10:00
Alexander Malishev
79b289f97e
HAL_ChibiOS: reverted change in omnibus hwdef.dat
2018-06-27 14:55:00 +10:00
Andrew Tridgell
8e8508a9f3
HAL_ChibiOS: enable OSD for MatekF405
2018-06-27 14:55:00 +10:00
Andrew Tridgell
cf19e7a3ae
HAL_ChibiOS: enabled OSD on KakuteF4
2018-06-27 14:55:00 +10:00
Alexander Malishev
8ce7ef1342
HAL_ChibiOS: added OSD support for MatekF405 and Omnibuspro
2018-06-27 14:55:00 +10:00
Andrew Tridgell
35f835a021
HAL_ChibiOS: improved OMNIBUSF7V2 support
2018-06-27 13:01:30 +10:00
Andrew Tridgell
7cce23671a
HAL_CbibiOS: removed unnecessary BOARD_SUBTYPE define
...
just causes build warnings
2018-06-27 11:37:45 +10:00
Andrew Tridgell
5bf078cc86
HAL_ChibiOS: fixed build with -Werror-sign-compare
2018-06-27 11:37:45 +10:00
Michael du Breuil
153ee6ca8e
AP_HAL_ChibiOS: Clear UART buffers when opening a port
2018-06-26 02:18:18 +01:00
Michael du Breuil
037e53ba8a
AP_HAL_ChibiOS: Reduce flash space of UARTDriver
...
Saves 32 bytes
2018-06-26 02:18:18 +01:00
Andrew Tridgell
a0b4553a26
HAL_ChibiOS: fixed bootloader build issue
2018-06-25 21:22:31 +10:00
Andrew Tridgell
bf6fb72904
HAL_ChibiOS: fixed 32 bit flash writes
2018-06-25 21:22:31 +10:00
Andrew Tridgell
f71d2a7417
HAL_ChibiOS: support bootloaders with no uarts
2018-06-25 21:22:31 +10:00
Andrew Tridgell
277836ccc7
HAL_ChibiOS: added bootloader definition for fmuv3
...
including UART support on 2 UARTs
2018-06-25 21:22:31 +10:00
Andrew Tridgell
e40457d98f
HAL_ChibiOS: avoid malloc in usbcfg
...
this avoids the need for malloc in the bootloader
2018-06-25 21:22:31 +10:00
Andrew Tridgell
369ac5edd0
HAL_ChibiOS: save more space in the bootloader
2018-06-25 21:22:31 +10:00
Andrew Tridgell
e870b5f00a
HAL_ChibiOS: use 32 bit flash operations when possible
2018-06-25 21:22:31 +10:00
Andrew Tridgell
feefa05b41
HAL_ChibiOS: expose stm32_flash_ispageerased()
2018-06-25 21:22:31 +10:00
Andrew Tridgell
dd1bd43a2e
HAL_ChibiOS: added stm32_flash_keep_unlocked()
2018-06-25 21:22:31 +10:00
Alexander Malishev
95f3eb5ab6
HAL_ChibiOS: stop logging before reboot
2018-06-25 17:46:20 +10:00
Alexander Malishev
cfa18b8e70
HAL_ChibiOS: reduce dataflash buffer size on targets with 128KB ram
2018-06-25 17:43:26 +10:00
Andrew Tridgell
dc0f2f9319
HAL_ChibiOS: use USB for stdout on more boards
...
don't waste a UART
2018-06-24 08:26:28 +10:00
Andrew Tridgell
2cfdc98453
HAL_ChibiOS: fixed omnibusf4pro bootloader LED pins
2018-06-24 08:26:28 +10:00
Andrew Tridgell
b149089830
HAL_ChibiOS: fixed board IDs and added more bootloaders
2018-06-24 08:26:28 +10:00
Andrew Tridgell
2f8a534243
HAL_ChibiOS: expand param storage on F4 boards with flash storage
...
this allows for a lot more param space on these boards
2018-06-24 08:26:28 +10:00
Andrew Tridgell
e868a4fe8b
HAL_ChibiOS: set FLASH_RESERVE_START_KB in the environment
...
used to correctly setup an intel hex file
2018-06-23 17:06:38 +10:00
Andrew Tridgell
1c807e0078
HAL_ChibiOS: added option to limit size of bootloader
...
this will ensure our F4 bootloaders stay under 16k
2018-06-23 17:06:38 +10:00
Andrew Tridgell
e11b3f2f0e
HAL_ChibiOS: run CAN thread at 3KHz
...
at 10KHz we were causing occasional CRC errors on the UART to IOMCU
2018-06-22 08:40:12 +10:00
Andrew Tridgell
d88b710ea9
HAL_ChibiOS: added more bootloader hwdef-bl.dat files
2018-06-22 08:00:31 +10:00
Andrew Tridgell
518d41e0d4
HAL_ChibiOS: added OTP defines
2018-06-22 08:00:31 +10:00
Kelly-Foster
ae84202bf2
HAL_ChibiOS: added MatekF405-Wing hwdef.dat
2018-06-22 08:00:31 +10:00
Andrew Tridgell
14f66461a7
HAL_ChibiOS: shrink build size for bootloader
...
thanks to @sh83 for the idea
2018-06-22 08:00:31 +10:00
Alexander Malishev
661259de4e
HAL_ChibiOS: reduce .text aigment to save flash space
2018-06-22 08:00:31 +10:00
Andrew Tridgell
608490f5ae
HAL_ChibiOS: fixed cube-orange bl build
2018-06-22 08:00:31 +10:00
Andrew Tridgell
f9faa0765d
HAL_ChibiOS: fixed bootloader IDs
2018-06-22 08:00:31 +10:00
Andrew Tridgell
3fc6824bfb
HAL_ChibiOS: setup more bootloader config files
2018-06-22 08:00:31 +10:00
Andrew Tridgell
0cd46c063c
HAL_ChibiOS: fixed flash driver for F7
...
we need a data sync barrier due to the F7 cache
2018-06-22 08:00:31 +10:00
Andrew Tridgell
82428dfbc6
HAL_ChibiOS: added f405-bl hwdef.dat
2018-06-22 08:00:31 +10:00
Andrew Tridgell
3ef88e1b8f
HAL_ChibiOS: allow flash support for bootloader
2018-06-22 08:00:31 +10:00
Andrew Tridgell
5216870492
HAL_ChibiOS: avoid strstr in usbcfg
...
saves nearly 2k of flash
2018-06-22 08:00:31 +10:00
Andrew Tridgell
c12d14d7a4
HAL_ChibiOS: check for ChibiOS features
2018-06-22 08:00:31 +10:00
Andrew Tridgell
03f67d82c9
HAL_ChibiOS: allow more ChibiOS functionality to be disabled
...
used by bootloader builds for minimal flash size
2018-06-22 08:00:31 +10:00
Andrew Tridgell
e3a23921a2
HAL_ChibiOS: fixed FLASH_LOAD_ADDRESS
...
needs 0x08000000 base
2018-06-22 08:00:31 +10:00
Andrew Tridgell
1c054f0e4a
HAL_ChibiOS: fixed clock line on fmuv5 I2C4
...
there was a typo in the datasheet
2018-06-21 13:08:20 +10:00
Andrew Tridgell
a8f99882ba
HAL_ChibiOS: allow FrSky_INV to be controlled as GPIO
...
this allows control via relay settings
2018-06-21 07:40:50 +10:00
Andrew Tridgell
e3b68876a9
HAL_ChibiOS: fixed tx_len on tx DMA timeout
2018-06-19 09:08:45 +10:00
Andrew Tridgell
8431a677d9
HAL_ChibiOS: added a timeout to DMA UART TX
...
this prevents a shared DMA channel being held for a long time if a CTS
pin is held either by not being connected or by a radio
2018-06-19 09:08:45 +10:00
Hyungsub
8ae2729022
AP_HAL_ChibiOS: fix memory leaks
...
Fixes #8644
2018-06-18 10:30:56 +01:00
Andrew Tridgell
1c4bf3d804
HAL_ChibiOS: fixed build warning
2018-06-15 11:26:40 +10:00
Lucas De Marchi
46213eb97e
chibios_hwdef: fix wrong uart index
...
calling uart_list.index() will find the first element with that name,
which is not really what we want when we have multiple EMPTY uarts.
2018-06-15 08:21:40 +10:00
Andrew Tridgell
00d919018b
HAL_ChibiOS: added RTC clock implementation
2018-06-15 08:01:22 +10:00
Andrew Tridgell
10ca1e78e8
HAL_ChibiOS: switched to Mode3 on SPI1
...
this is now working correctly
2018-06-13 20:05:26 +10:00
Andrew Tridgell
9d248456e4
HAL_ChibiOS: re-enable I2C4 DMA for F765
...
now we have fixed the error from the datasheet we can do DMA
2018-06-13 20:05:26 +10:00
Andrew Tridgell
ad3eca4e6b
HAL_ChibiOS: fixed I2C4 DMA streams
...
There is an error in the datasheet. See
https://community.st.com/thread/50484-documentation-error-on-dma-channels-for-i2c4-on-stm32f7
2018-06-13 20:05:26 +10:00
Andrew Tridgell
62e8fbb9d3
HAL_ChibiOS: fixed OMNIBUSF7V2 hwdef.dat
2018-06-13 20:05:26 +10:00
Andrew Tridgell
e068106669
HAL_ChibiOS: support I2C devices on STM32F7 without DMA
...
this allows us to support I2C4 on fmuv5
2018-06-13 20:05:26 +10:00
Alexander Malishev
289b93c3d0
HAL_ChibiOS: added parse_timer to chibios_hwdef.dat
2018-06-11 18:32:17 +10:00
Eugene Shamaev
2055f264e5
AP_HAL_ChibiOS: helper func
2018-06-09 22:46:48 -07:00
Andrew Tridgell
ab946b5d76
HAL_ChibiOS: disable debug code for FMUv5
2018-06-08 09:56:41 +10:00
Philip
2424e38ed2
HAL_ChibiOS: Update cube-orange hwdef.dat for USB IDs
2018-06-08 09:56:41 +10:00
Andrew Tridgell
058e83c180
HAL_ChibiOS: switched cube-orange SPI1 devices to Mode0
2018-06-08 09:56:41 +10:00
Andrew Tridgell
2df0a71a4b
HAL_ChibiOS: fixed flash load address in hwdef.h
2018-06-08 09:56:41 +10:00
Andrew Tridgell
3a7c1b4d42
HAL_ChibiOS: switch BMI055 to mode0 on fmuv5
2018-06-08 09:56:41 +10:00
Andrew Tridgell
3be9077ba9
HAL_ChibiOS: added FMUv5 FMU capture pins
2018-06-06 15:01:38 +10:00
Andrew Tridgell
c05086430d
HAL_ChibiOS: fixed hwdef.h generation for PWM on tim12
2018-06-06 15:01:38 +10:00
Andrew Tridgell
63087b6425
HAL_ChibiOS: enable fmu out 7 and 8 for fmuv5
...
these are exposed on the Pixhawk4
2018-06-06 15:01:38 +10:00
Alexander Malishev
eac5d13f1c
HAL_ChibiOS: use 2 channels in SoftSigReaderInt.cpp
2018-06-06 08:23:51 +10:00
Alexander Malishev
fd45b3a69b
HAL_ChibiOS: slightly increase EICU interrupt priority
2018-06-06 08:23:51 +10:00
Alexander Malishev
73d33356ad
HAL_ChibiOS: detect overcapture in SoftSigReaderInt.cpp
2018-06-06 08:23:51 +10:00
Andrew Tridgell
7a1f87eb52
HAL_ChibiOS: added cube-orange hwdef
2018-06-06 08:13:38 +10:00
Michael du Breuil
1123023a6f
AP_HAL_ChibiOS: Wrap process registration with a semaphore
2018-06-06 07:16:58 +10:00
Michael du Breuil
a832bdfd04
AP_HAL_ChibiOS: fix race condition on analog reading
2018-06-06 07:16:58 +10:00
Michael du Breuil
4a9fe1745f
AP_ChibiOS: Remove timer process suspension interface
2018-06-06 07:16:58 +10:00
Andrew Tridgell
1ed6a9d34b
HAL_ChibiOS: added MCU tables for STM32F777
2018-06-06 07:15:41 +10:00
Andrew Tridgell
d1caa86e12
HAL_ChibiOS: adjust DMA priorities for fmuv3
2018-06-06 07:15:41 +10:00
Andrew Tridgell
c273b23940
HAL_ChibiOS: moved MCU config to python database
...
this moves the key MCU config variables related to memory to the
python MCU database, allowing the hwdef.dat to be considerably simpler
2018-06-06 07:15:41 +10:00
Andrew Tridgell
f390e35c99
HAL_ChibiOS: use port_disable in reboot
...
this provides a more reliable way to stop all interrupts
2018-06-06 07:15:41 +10:00
Andrew Tridgell
a1c97d0585
HAL_ChibiOS: disable paranoid checks for fmuv5
2018-06-06 07:15:41 +10:00
Andrew Tridgell
a945c97ec6
HAL_ChibiOS: fixed 3-way DMA sharing bug
...
when we have 3 way contention across two DMA streams we could get the
dma_deallocate function called in an object from two places at
once. This adds a mutex that prevents that scenario
2018-06-06 07:15:41 +10:00
Andrew Tridgell
0e09dc75c0
HAL_ChibiOS: flush all memory on chSysHalt()
...
this makes debugging a lot easier, as gdb can see the values in dcache
2018-06-06 07:15:41 +10:00
Andrew Tridgell
2493cdbcb6
HAL_ChibiOS: switch to new bouncebuffer system
...
this removes the dma_flush and dma_invalidate methods and uses a
common bouncebuffer system for all CPU types. This enables microSD
support on STM32F7
2018-06-06 07:15:41 +10:00
Andrew Tridgell
0b1e26a470
HAL_ChibiOS: added bouncebuffer system
...
this makes our bouncebuffers available for ChibiOS system
drivers. This is needed for SDMMCv1 on STM32F7
2018-06-06 07:15:41 +10:00
Andrew Tridgell
56ce3f057d
HAL_ChibiOS: added DRDY and SDMMC pins for FMUv5
2018-06-06 07:15:41 +10:00
Andrew Tridgell
018c9ad40b
HAL_ChibiOS: fixed build warnings
2018-06-06 07:15:41 +10:00
Andrew Tridgell
f25b95f287
HAL_ChibiOS: fixed array length in ADC debug code
2018-06-06 07:15:41 +10:00
Andrew Tridgell
fef1b0ffc6
HAL_ChibiOS: fixed I2C flush/invalidate calls
2018-06-06 07:15:41 +10:00
Andrew Tridgell
0fade4eb9e
HAL_ChibiOS: make sure the UART bounce buffers are DMA safe
2018-06-06 07:15:41 +10:00
Andrew Tridgell
eec4a12cc2
HAL_ChibiOS: switched to using DTCM memory for DMA
...
this uses SRAM1 and SRAM2 for main memory, which enables the use of the
data cache for faster operation, and using DTCM for all DMA operations.
2018-06-06 07:15:41 +10:00
Andrew Tridgell
8b1db792ee
HAL_ChibiOS: ensure ADC memory is aligned for DMA access
2018-06-06 07:15:41 +10:00
Andrew Tridgell
bb2e7a189f
HAL_ChibiOS: added a debug function for showing stack free
...
this can be enabled when needed to investigate stack space remaining
2018-06-06 07:15:41 +10:00
Andrew Tridgell
010cd71ab6
HAL_ChibiOS: enable CAN on FMUv5
...
and fixed voltage scaling defaults
2018-06-06 07:15:41 +10:00
Andrew Tridgell
2087354939
HAL_ChibiOS: align buffers to STM32F7 cache lines
...
this allows for DMA flush and invalidate operations to work on all
dynamically allocated memory
2018-06-06 07:15:41 +10:00
Andrew Tridgell
762e4f9915
HAL_ChibiOS: fixed dma priorities for fmuv5
2018-06-06 07:15:41 +10:00
Andrew Tridgell
77d95f6744
HAL_ChibiOS: fmuv5 tweaks
2018-06-06 07:15:41 +10:00
Andrew Tridgell
a220220758
HAL_ChibiOS: added comment on IS_DMA_SAFE()
2018-06-06 07:15:41 +10:00
Andrew Tridgell
4d4ea894e8
HAL_ChibiOS: disable i2c device debug code
2018-06-06 07:15:41 +10:00
Andrew Tridgell
edb831653f
HAL_ChibiOS: added dma_flush and dma_invalidate operations
...
these are needed to manage the data cache on the STM32F7
2018-06-06 07:15:41 +10:00
Andrew Tridgell
7449e15313
HAL_ChibiOS: disable flash storage option on FMUv5
...
F7 flash driver not working yet
2018-06-06 07:15:41 +10:00
Andrew Tridgell
b961e12456
HAL_ChibiOS: support having no flash storage option
2018-06-06 07:15:41 +10:00
Andrew Tridgell
2d8748ddce
HAL_ChibiOS: enable ADCs and buzzer for fmuv5
2018-06-06 07:15:41 +10:00
Andrew Tridgell
6aab9232ef
HAL_ChibiOS: enable aux pwm channels on FMUv5
2018-06-06 07:15:41 +10:00
Andrew Tridgell
db9bf19e46
HAL_ChibiOS: enable i2c for FMUv5
2018-06-06 07:15:41 +10:00
Andrew Tridgell
77bb69fa2e
HAL_ChibiOS: enabled UARTs for FMUv5
2018-06-06 07:15:41 +10:00
Andrew Tridgell
ac44189ab2
HAL_ChibiOS: setup two IMUs for FMUv5
2018-06-06 07:15:41 +10:00
Andrew Tridgell
721f3cd5d1
HAL_ChibiOS: fixed flash layout for F7
...
thanks to @alielectric
2018-06-06 07:15:41 +10:00
Andrew Tridgell
01f5d1a17c
HAL_ChibiOS: first IMU working
2018-06-06 07:15:41 +10:00
Andrew Tridgell
eca634ec62
HAL_ChibiOS: support 6 SPI buses
2018-06-06 07:15:41 +10:00
Andrew Tridgell
4ad757b4d1
HAL_ChibiOS: fixed pincount for F7
2018-06-06 07:15:41 +10:00
Andrew Tridgell
876899c48d
HAL_ChibiOS: baro and FRAM working for fmuv5
2018-06-06 07:15:41 +10:00
Andrew Tridgell
8d2f57898b
HAL_ChibiOS: adjust pin counts for STM32F7
2018-06-06 07:15:41 +10:00
Andrew Tridgell
1f6ffc48e5
HAL_ChibiOS: allow STM32F7 to build with flash driver
2018-06-06 07:15:41 +10:00
Andrew Tridgell
7c09a1781b
HAL_ChibiOS: started on fmuv5
2018-06-06 07:15:41 +10:00
Michael du Breuil
593da25a7a
AP_HAL_ChibiOS: Remove RC overrides
2018-06-05 09:51:09 +10:00
Andrew Tridgell
a011561a6a
HAL_ChibiOS: support sdcard on MatekF405
2018-05-27 19:10:24 +10:00
Andrew Tridgell
ea37cede28
HAL_ChibiOS: stop sdcard interface on reboot
2018-05-27 19:10:24 +10:00
Andrew Tridgell
86ded2c40c
HAL_ChibiOS: cleanup sdcard API usage
2018-05-27 19:10:24 +10:00
Andrew Tridgell
52c8d3ed9f
HAL_ChibiOS: fixed SPI select error
...
changes by sdcard PR
2018-05-27 19:10:24 +10:00
Andrew Tridgell
2c55589488
HAL_ChibiOS: added hwdef for MatekF405
2018-05-27 19:10:24 +10:00
Alexander Malishev
83e65b3c6e
HAL_ChibiOS: turn on sdcard on f4by
2018-05-27 19:10:24 +10:00
Alexander Malishev
66de6d770a
HAL_ChibiOS: Enable reentrancy on FatFS sybsystem
2018-05-27 19:10:24 +10:00
Alexander Malishev
6b15b2f44f
HAL_ChibiOS: Enable sdcard on spi bus
2018-05-27 19:10:24 +10:00
Andrew Tridgell
7b720aae46
HAL_ChibiOS: allow printf() to work on systems without debug console
...
map to hal.console once initialised
2018-05-26 19:06:25 +10:00
Andrew Tridgell
dbe0f3c575
HAL_ChibiOS: fixed assert in reboot
...
with asserts enabled we can't sleep with interrupts off
2018-05-26 17:23:46 +10:00
Andrew Tridgell
79ca1e76c0
HAL_ChibiOS: improve reliability of reboot
2018-05-26 15:53:25 +10:00
Andrew Tridgell
7e897c16c0
HAL_ChibiOS: maintain rcout state beyond BRD_PWM_COUNT
...
allow channels beyond BRD_PWM_COUNT to be sent over SBUS or DShot
distribution
2018-05-26 12:08:54 +10:00
Andrew Tridgell
afb36ec168
HAL_ChibiOS: run can loop much more often
...
this allows for much higher ESC and servo rates, as it gives more
changes for frames to get out
2018-05-25 13:53:17 +10:00
Michael du Breuil
3a62bca7d0
AP_HAL_ChibiOS: Make redefined pins an error, fix FMUv3
2018-05-25 09:57:18 +10:00
Andrew Tridgell
f3179e7934
HAL_ChibiOS: improved reliability of DShot passthru
...
thanks to WickedShell for debugging this on his Wraith32 ESCs. We were
truncating the last bit on some BLHeli transfers
2018-05-22 18:59:51 +10:00
Eugene Shamaev
4ab2ff8c81
AP_HAL_ChibiOS: HAL_RCINPUT_WITH_AP_RADIO definition
2018-05-22 08:35:01 +09:00
Andrew Tridgell
89898bae1d
HAL_ChibiOS: take account of available bytes in receive_time_constraint_us
2018-05-21 14:53:18 +10:00
Andrew Tridgell
dcd7799ec9
HAL_ChibiOS: fixed DShot output on fixed wing
...
we need to mark the channels as 'fast' for DShot to enable properly
2018-05-21 13:31:00 +10:00
Andrew Tridgell
8571e59d85
HAL_ChibiOS: fixed SBUS inversion for KakuteF4
2018-05-20 15:50:44 +10:00
Andrew Tridgell
7005383f82
HAL_ChibiOS: implement uart receive timestamp API
2018-05-16 18:49:22 +10:00
mirkix
cb50639e27
AP_HAL_ChibiOS: add STM32F7 UART support
2018-05-15 07:23:56 +10:00
Alexander Malishev
7eb08bbd40
HAL_ChibiOS: Fix inverter on Omnibus F4 V3
2018-05-14 06:06:40 +10:00
Andrew Tridgell
794ebe32e3
HAL_ChibiOS: fixed mixture of oneshot and normal PWM on IOMCU
2018-05-12 07:28:05 +10:00
Michael du Breuil
72a4846f40
AP_HAL_ChibiOS: Remove set_overrides() method
2018-05-11 12:13:39 +01:00
mirkix
34c96c80ff
AP_HAL_ChibiOS: rename BUZZER_PIN into HAL_BUZZER_PIN
2018-05-10 17:48:25 +01:00
Peter Barker
b2a81405ea
AP_HAL_ChibiOS: move delay callback handling to base HAL Scheduler class
2018-05-09 16:15:38 +10:00
anbello
5b56887428
Changes to be committed:
...
modified: hwdef.dat
Modified as per @sh83 hints
2018-05-08 07:33:19 +10:00
anbello
93f551e56e
define for AirbotF4 board (ChibiOS HAL)
...
modified: libraries/AP_HAL/AP_HAL_Boards.h
new file: libraries/AP_HAL_ChibiOS/hwdef/airbotf4/hwdef.dat
2018-05-08 07:33:19 +10:00
Alexander Malishev
776d5e6ba3
HAL_ChibiOS: Fixed s-bus signal polarity in SoftSigReaderInt.cpp
2018-05-07 11:46:35 +10:00
Andrew Tridgell
dcab51801c
HAL_ChibiOS: implement boost_end
...
this fixes problems with main thread priority and SPI bus delays on
fmuv3
2018-05-05 07:45:53 +10:00
Andrew Tridgell
5854ccbb4c
HAL_ChibiOS: removed stray debug code
...
thanks to @alielectric for noticing
2018-05-03 17:04:14 +10:00
Andrew Tridgell
2684f46641
HAL_ChibiOS: fixed IMU orientation for revo-mini
2018-04-30 08:33:39 +10:00
mirkix
c2eee2db23
AP_HAL_ChibiOS: add STM32F7 I2C support
2018-04-29 07:59:52 +10:00
Alexander Malishev
1fd52c4e01
HAL_ChibiOS: added input capture filter
2018-04-28 07:31:58 +10:00
Alexander Malishev
0d6043e0c6
HAL_ChibiOS: Fixed current and voltage sense on OmnibusF4PRO
2018-04-26 07:57:06 +10:00
Andrew Tridgell
f75dea34e1
HAL_ChibiOS: fixed integer promotion bug in SoftSigReaderInt
...
this caused corrupted PPM values. Many thanks to Andrea Belloni for reporting
2018-04-25 22:25:26 +10:00
Andrew Tridgell
bba8d506d6
HAL_ChibiOS: port for kakutef4 flight board
2018-04-24 08:03:46 +10:00
Andrew Tridgell
95108a2d2c
HAL_ChibiOS: added support for 16 bit timers
2018-04-24 08:03:46 +10:00
Alexander Malishev
03d88b01be
HAL_ChibiOS: added support for interrupt based rcin parsing
2018-04-24 08:03:46 +10:00
malcolm churn
7718196838
HAL_ChibiOS: Fix sparky2 target.
...
Correct pin mappings, ADC, PWM.
Not working
Flash memory, Logging, external i2c tested with NXP MAG3110.
2018-04-22 21:01:14 +10:00
Peter Barker
557f8cee43
AP_HAL_ChibiOS: add mode-change-beeps
2018-04-19 09:29:41 +10:00
mirkix
79f3fd532b
AP_HAL_ChibiOS: fix spi clock calculation
2018-04-19 08:32:31 +10:00
Andrew Tridgell
bb0cbd15a4
HAL_ChibiOS: implement fmuv4 safety state
...
and added safety_mask and safety_pwm support for both fmuv3 and fmuv4
2018-04-17 10:14:01 +10:00
Andrew Tridgell
77c922e6b8
HAL_ChibiOS: make embed.py work with python3
2018-04-17 08:44:44 +10:00
Andrew Tridgell
3749480dd8
HAL_ChibiOS: create ap_romfs_embedded.h
...
use ROMFS keywork for romfs files
2018-04-17 08:44:44 +10:00
Alexey Kozin
f87cc4e172
f4by chibios new style dma table build fix
2018-04-16 07:50:34 +10:00
Andrew Tridgell
4871bbf403
HAL_ChibiOS: make soft serial for RC serial more efficient
...
using system ticks halves the IRQ time
2018-04-16 07:40:55 +10:00
mirkix
a9449ccd29
AP_HAL_ChibiOS: add f767-min board support
2018-04-15 07:40:46 +10:00
Michael du Breuil
8374c5a4f3
AP_HAL_ChibiOS: Remove unused priority level
2018-04-15 07:28:20 +10:00
kozinalexey
2316fee279
HAL_ChibiOS: f4by conf2 fixed ram size, ext compass, pwm count
2018-04-14 11:09:34 +10:00
Alexander Malishev
ca33ff04d9
ChibiOS: add support for omnibusf4pro board
2018-04-14 09:25:15 +10:00
Alexander Malishev
79b5719419
ChibiOS: add support for complementry output timer channels
2018-04-14 09:25:15 +10:00
Alexander Malishev
1b7eecdf2f
ChibiOS: fixed tables for F405 mcu
2018-04-14 09:25:15 +10:00
mirkix
8074361bb8
AP_HAL_ChibiOS: add hardware def for STM32F767xx
2018-04-12 14:19:40 +10:00
Andrew Tridgell
c6d7691667
HAL_ChibiOS: fixed F745 database for new DMA system
2018-04-12 11:50:44 +10:00
Andrew Tridgell
7286ffab77
HAL_ChibiOS: define FLASH_LOAD_ADDRESS in hwdef.h
...
used for bootloader support
2018-04-12 11:50:44 +10:00
Andrew Tridgell
e4ce2f532b
HAL_ChibiOS: make smaller builds possible
...
this allows for much smaller builds when you disable a lot of
options. This is part of an effort to create a bootloader of less than
16k using ChibiOS
2018-04-12 11:50:44 +10:00
Andrew Tridgell
ef9d9d9c26
HAL_ChibiOS: first boot of OMNIBUSF7V2
...
only the 20608 works, and it has lots of errors.
The bmp280 is detected, but does not give good data
no UARTs yet
2018-04-12 11:50:44 +10:00
Andrew Tridgell
02f20b4114
HAL_ChibiOS: first version of OMNIBUSF7V2 board support
...
first F7 based board
2018-04-12 11:50:44 +10:00
Andrew Tridgell
a9edbb6b2d
HAL_ChibiOS: allow for a defaults.parm file in hwdef directory
...
this keeps defaults with the board, where that is appropriate
2018-04-12 11:50:44 +10:00
Andrew Tridgell
6e5cbc7c3d
HAL_ChibiOS: initial support for F745 boards
2018-04-12 11:50:44 +10:00
Andrew Tridgell
551dca63e1
HAL_ChibiOS: added build information for each MCU
...
this abstracts the build information for each MCU, so that hwdef.dat
can control the build process of ChibiOS
2018-04-12 11:50:44 +10:00
Andrew Tridgell
d1e4185817
HAL_ChibiOS: don't build flash.c if not needed
2018-04-12 11:50:44 +10:00
Andrew Tridgell
cdbbceb6b6
HAL_ChibiOS: cope with SDMMC peripheral for microSD
2018-04-12 11:50:44 +10:00
Andrew Tridgell
751024f483
HAL_ChibiOS: mark two skyviper builds as needing abin files
2018-04-11 15:09:49 +10:00
Mark Whitehorn
960e217e79
AP_HAL_Chibios: fix latent bug in ToneAlarm
2018-04-10 21:48:16 +10:00
Andrew Tridgell
f2df171fdd
HAL_ChibiOS: fixed DSM input on fmuv4
2018-04-10 17:22:21 +10:00
Andrew Tridgell
96cc657bd0
HAL_ChibiOS: fixed GPIO interrupt port mapping
2018-04-09 15:32:04 +10:00
Andrew Tridgell
b4aeffbaed
HAL_ChibiOS: added power status flags reporting
2018-04-09 15:32:04 +10:00
Andrew Tridgell
7c85d06600
HAL_ChibiOS: setup pwm counts, and cleanup mindpx-v2 PWM lines
2018-04-09 15:32:04 +10:00
Andrew Tridgell
1b9cebc3f2
HAL_ChibiOS: check pwm count in rcout init
2018-04-09 15:32:04 +10:00
Andrew Tridgell
68293c9c11
HAL_ChibiOS: don't require GPIO() markers on PWM outputs
...
this fixes blheli pass-thru on MindPX-v2
2018-04-09 15:32:04 +10:00
Andrew Tridgell
eb6c852ee3
HAL_ChibiOS: use simpler pullup on serial input
...
this maps to the right bits for each MCU type
2018-04-07 09:10:29 +10:00
Andrew Tridgell
71cd58cc7e
HAL_ChibiOS: run rc serial thread at top priority
...
this maximises reliability for serial IO to ESCs, increasing flashing
reliability
2018-04-07 09:10:29 +10:00
Andrew Tridgell
3cd4f2a002
AP_ChibiOS: handle oneshot125 separately
...
this sets up oneshot125 with the full 1000 steps of throttle
resolution, using a 8MHz clock. This matches the behaviour of modern
ESCs that measure PWM values with high accuracy
2018-04-07 09:10:29 +10:00
Andrew Tridgell
67993d6e5c
HAL_ChibiOS: re-instate priority boost system
...
this adds back in the priority boost system for the main thread when
waiting for a IMU sample. This significantly improves scheduling
performance on very busy boards like a PH2.1
2018-04-07 09:10:29 +10:00
Andrew Tridgell
2c6e6e3b13
HAL_ChibiOS: removed obsolete DShot example code
2018-04-07 09:10:29 +10:00
Andrew Tridgell
9b22e0b7cc
HAL_ChibiOS: fixed SPI rates on fmuv3
...
this fixes a SPI bandwidth issue on PH2.1 with 3 IMUs active
2018-04-07 09:10:29 +10:00
Andrew Tridgell
8e59f6aad6
HAL_ChibiOS: implement get_esc_scaling()
2018-04-07 09:10:29 +10:00
Andrew Tridgell
a2eec97325
HAL_ChibiOS: raised default SPI priority
...
this was causing transfer errors on the primary IMU of a PH2.1 when
fast sampling was enabled
2018-04-07 09:10:29 +10:00
Andrew Tridgell
5bfc97f9c0
HAL_ChibiOS: fixed dshot trigger while serial active
2018-04-07 09:10:29 +10:00
Andrew Tridgell
e448b5d069
HAL_ChibiOS: implement UART port locking
2018-04-07 09:10:29 +10:00
Andrew Tridgell
6fd0af11ef
HAL_ChibiOS: implement telem request API
2018-04-07 09:10:29 +10:00
Andrew Tridgell
751c3a554a
HAL_ChibiOS: added fmuv4-beta hardware definition
...
for an old pixracer quad I have (and I believe Peter has one too)
2018-04-07 09:10:29 +10:00
Andrew Tridgell
6bdb523630
HAL_ChibiOS: guarantee 1kHz output for DShot
2018-04-07 09:10:29 +10:00
Andrew Tridgell
692f22c17f
HAL_ChibiOS: added GPIO assignments for revo-mini
2018-04-07 09:10:29 +10:00
Andrew Tridgell
ef539d4145
HAL_ChibiOS: added debug timing option for RCOut
2018-04-07 09:10:29 +10:00
Andrew Tridgell
af1e3aa64d
HAL_ChibiOS: increase timeout on bytes for blheli
2018-04-07 09:10:29 +10:00
Andrew Tridgell
756c0d4b0b
HAL_ChibiOS: fixed reset for oneshot
...
after a BLHeli connection we need to go back to 1Hz on timer
2018-04-07 09:10:29 +10:00
Andrew Tridgell
9a29c6d3b5
HAL_ChibiOS: implement DigitalSource()
2018-04-07 09:10:29 +10:00
Andrew Tridgell
51c40a013b
HAL_ChibiOS: added IRQ save/restore to hal.scheduler
...
these are used by RPM driver
2018-04-07 09:10:29 +10:00
Andrew Tridgell
019049e76b
HAL_ChibiOS: fixed RC period setting
2018-04-07 09:10:29 +10:00
Andrew Tridgell
d258eac88d
HAL_ChibiOS: fixed reconfig of group after serial_end()
2018-04-07 09:10:29 +10:00
Andrew Tridgell
46c76c3d5d
HAL_ChibiOS: increase serial byte timeout
...
needs 2ms for final ack in verify
2018-04-07 09:10:29 +10:00
Andrew Tridgell
202a7dd091
HAL_ChibiOS: don't allow dshot while serial active
2018-04-07 09:10:29 +10:00
Andrew Tridgell
b350b07593
HAL_ChibiOS: allow internal GPIO fuctions to use disabled pins
2018-04-07 09:10:29 +10:00
Andrew Tridgell
67bae2669b
HAL_ChibiOS: enable serial5 on fmuv3
2018-04-07 09:10:29 +10:00
Andrew Tridgell
382772d999
HAL_ChibiOS: initial support for ESC serial output
2018-04-07 09:10:29 +10:00
Andrew Tridgell
26d279e165
HAL_ChibiOS: improve DShot timing accuracy
2018-04-07 09:10:29 +10:00
Andrew Tridgell
93111dc0b1
HAL_ChibiOS: ensure that IO UART gets DMA
2018-04-07 09:10:29 +10:00
Andrew Tridgell
95a261e061
HAL_ChibiOS: don't generate DMA channels for ALARM pin
2018-04-07 09:10:29 +10:00
Andrew Tridgell
01e9c55721
HAL_ChibiOS: fixed SPI bus speed on SPI3
...
and add optional bootup test of SPI bus speeds to help with porting to
new MCUs
2018-04-07 09:10:29 +10:00
Andrew Tridgell
610a6a6c88
HAL_ChibiOS: optimise USB config driver
2018-04-07 09:10:29 +10:00
Andrew Tridgell
bc32276966
HAL_ChibiOS: support DShot output
...
use DMAR burst DMA to minimise number of DMA channels needed
thanks to betaflight for the great reference implementation!
2018-04-07 09:10:29 +10:00
Andrew Tridgell
294aac6955
HAL_ChibiOS: fixed CTS pulldown
...
we need to pulldown to prevent delays in uart sends
2018-04-07 09:10:29 +10:00
Andrew Tridgell
a64819cbf2
HAL_ChibiOS: minimise DMA TX latency on contended UARTs
...
try to prevent long delays on other users of a DMA channel
2018-04-07 09:10:29 +10:00
Andrew Tridgell
a86e85c6b2
HAL_ChibiOS: enable checking for DMA contention
2018-04-07 09:10:29 +10:00
Andrew Tridgell
64278f07d3
HAL_ChibiOS: removed the DMA channels from RCIN in hwdef.dat
...
no longer needed as this is automatic now
2018-04-07 09:10:29 +10:00
Andrew Tridgell
9a5df6d1f7
HAL_ChibiOS: auto-generate DMA channels for RCIN
...
and add DMA channels for TIMx_UP ready for DMAR based DShot support
2018-04-07 09:10:29 +10:00
Andrew Tridgell
6aff7ecbf5
HAL_ChibiOS: added channel numbers for STM32F4xx MCUs
2018-04-07 09:10:29 +10:00
Andrew Tridgell
da2e79130b
HAL_ChibiOS: generate channel numbers in DMA tables
2018-04-07 09:10:29 +10:00
Andrew Tridgell
3501763f4e
HAL_ChibiOS: added DShot example app
2018-04-07 09:10:29 +10:00
Tom Pittenger
b864cd6ae6
AP_HAL_ChibiOS: include correct wrappers
2018-04-03 08:27:44 +10:00
Andrew Tridgell
c311599e0a
HAL_ChibiOS: make DEFAULT_PARAMETERS relative to source root
2018-03-24 16:12:10 +11:00
kozinalexey
5df2b1a3ac
chibios hal config for F4BY
2018-03-24 06:39:09 +11:00
Peter Barker
2efd9341cd
AP_HAL_ChibiOS: copy the common linker script to outdir, use it from there
...
The directory we write the linker script to might not have the correct relative path to reference this common.ld script. So make it reference common.ld in the current directory and copy common.ld to the output directory
2018-03-23 11:06:24 +11:00
Andrew Tridgell
fd6185be0f
HAL_ChibiOS: fixed python3 pickle error
2018-03-05 09:50:27 +11:00
Andrew Tridgell
961a97a8c9
HAL_ChibiOS: expand docs on STDOUT_SERIAL
2018-03-02 21:46:23 +11:00
Andrew Tridgell
0cd6c9e5fb
HAL_ChibiOS: added commented block on enable debug for builds
2018-03-02 21:39:38 +11:00
Andrew Tridgell
556f3ba53f
HAL_ChibiOS: make UARTs non-blocking by default
...
we never want blocking ports any more with ArduPilot, so defaulting to
blocking makes no sense
2018-03-02 21:39:38 +11:00
Andrew Tridgell
33dd14b8d9
HAL_ChibiOS: use PULLUP on UART TX/RX lines
...
this can prevent spurious bytes on disconnected pins
2018-03-02 21:39:38 +11:00
Andrew Tridgell
91c741ef07
HAL_ChibiOS: use a non-blocking lock for UART shared DMA
...
we can have multiple UARTs on the same thread sharing the same DMA TX
channel. That can lead to deadlock with blocking locks on DMA. This
makes UART requests for DMA locks non-blocking to fix the issue
2018-03-02 21:39:38 +11:00
Andrew Tridgell
08634903c8
HAL_ChibiOS: use relative path for common.ld
...
this avoids a path length issue under cygwin
2018-03-02 17:11:31 +11:00
Andrew Tridgell
9ab695b7ca
HAL_ChibiOS: fixed namespace error
...
thanks to Peter for noticing
2018-03-02 17:11:31 +11:00
Andrew Tridgell
153ad95398
HAL_ChibiOS: added hwdef.dat for minimal F405 and F427 boards
2018-03-02 12:52:50 +11:00
Andrew Tridgell
306d35655e
HAL_ChibiOS: allow for bare board builds
...
this allows for a build with no UARTs, no SPI, no I2C, no PWM. Great
for initial board bringup with just USB
2018-03-02 12:52:50 +11:00
Andrew Tridgell
74ed19f460
HAL_ChibiOS: moved more board setup into hwdef.dat
2018-03-02 12:52:50 +11:00
Andrew Tridgell
ebbd15ea17
HAL_ChibiOS: auto-enable CAN when pins are defined
2018-03-02 12:52:50 +11:00
Andrew Tridgell
d84c487a60
HAL_ChibiOS: generate env.py from hwdef.dat
...
allowing for environment override in hwdef.dat
2018-03-02 12:52:50 +11:00
Andrew Tridgell
5f353b5c85
HAL_ChibiOS: fixed build of I2C without I2C1 defined
2018-03-02 12:52:50 +11:00
Andrew Tridgell
6b6c35a435
waf: use relative paths for ChibiOS build
...
this fixes the ChibiOS build on cygwin by reducing path lengths to
below the cygwin limit
2018-03-02 12:52:50 +11:00
Andrew Tridgell
21951243f0
HAL_ChibiOS: default debug checks off
...
these can be enabled as needed for board bringup, but are too
expensive for general use
2018-03-02 12:52:50 +11:00
Andrew Tridgell
0cf104f2f3
HAL_ChibiOS: added scale_esc_to_unity()
...
needed for per-motor compass cal
2018-03-02 12:52:50 +11:00
Andrew Tridgell
21d401e844
HAL_ChibiOS: fixed compass orientation for revo-mini
2018-03-02 12:52:50 +11:00
Andrew Tridgell
46c3308964
HAL_ChibiOS: enable mag on crazyflie2
2018-03-02 12:52:50 +11:00
Andrew Tridgell
d5fc1ff3d4
HAL_ChibiOS: fixed crazyflie motor order
2018-03-02 12:52:50 +11:00
Andrew Tridgell
7e8ceb1121
HAL_ChibiOS: define ALLOW_ARM_NO_COMPASS
2018-03-02 12:52:50 +11:00
Andrew Tridgell
e05bac425f
HAL_ChibiOS: setup crazyflie2 IMU and baro
2018-03-02 12:52:50 +11:00
Andrew Tridgell
9e84c45035
HAL_ChibiOS: dynamically create name for bus threads
2018-03-02 12:52:50 +11:00
Andrew Tridgell
312bde54b4
HAL_ChibiOS: added fmuv2 build for 1M flash boards
2018-03-01 15:25:55 +11:00
Francisco Ferreira
e4382c2232
AP_HAL_ChibiOS: fix CAN thread name
2018-02-28 11:37:55 +09:00
Andrew Tridgell
2581965669
HAL_ChibiOS: fixed mini-pix IMU orientation
2018-02-26 19:16:24 +11:00
Andrew Tridgell
11cfa5fd01
HAL_ChibiOS: correct LSM9DS0 bus IDs to match HAL_PX4
2018-02-19 15:49:32 +11:00
Andrew Tridgell
4d0c3b6581
HAL_ChibiOS: added pixartPC15 SPI device for SPI01
2018-02-14 18:27:00 +11:00
Andrew Tridgell
c4445a7dfd
AP_HAL_ChibiOS: initial hwdef for crazyflie2
2018-02-14 18:27:00 +11:00
Andrew Tridgell
a6e0bb4ed0
HAL_ChibiOS: fixed uart order for revo-mini
...
and setup right battery pins
2018-02-14 18:27:00 +11:00
Andrew Tridgell
17b3607aa8
HAL_ChibiOS: fixed RCIN on revo-mini
...
this also adds an attempt at using 'N' (inverted) channels for
RCIN. This doesn't work yet, but would be better for the revo-mini, as
it would allow the normal RCIN pin to be used
2018-02-14 18:27:00 +11:00
Andrew Tridgell
c6879c679a
HAL_ChibiOS: re-enable USART1 on revo-mini
2018-02-14 18:27:00 +11:00
Andrew Tridgell
427e00dd41
HAL_ChibiOS: switched to system timer for AP_HAL::micros()
...
this uses the ChibiOS system timer instead of a separate GPT timer for
the core ChibiOS timer. The advantage is it saves us a timer, plus it
changes ChibiOS to use a 1MHz clock on its timer, which gives us
higher resolution for delays.
This has a remarkable effect on timing jitter, reducing it greatly
2018-02-14 18:27:00 +11:00
Andrew Tridgell
f357eec78b
HAL_ChibiOS: added more comments in hwdef.dat
2018-02-14 18:27:00 +11:00
Andrew Tridgell
9a95737d7d
HAL_ChibiOS: added lots of comments to FMUv3 hwdef.dat
...
this should help for developers of new boards
2018-02-14 18:27:00 +11:00
Andrew Tridgell
a057498e0c
HAL_ChibiOS: pull PA9 PA10 high on revo-mini
...
needed for correct operation of USB
2018-02-14 18:27:00 +11:00
Andrew Tridgell
66608e8cad
HAL_ChibiOS: improved mini-pix support
2018-02-14 18:27:00 +11:00
ljwang
9b99a0ce55
AP_HAL_ChibiOS: fixed mini-pix hwdef.dat
2018-02-14 18:27:00 +11:00
Andrew Tridgell
c3f8d5580a
HAL_ChibiOS: undef log directory for skyviper-v2450
2018-02-14 07:39:27 +11:00
Andrew Tridgell
b7c4dea9d3
HAL_ChibiOS: gain back 250usec in loop time
...
if we have already called delay_microseconds_boost() then we know
we've given up time to drivers, so we can avoid the extra delay in the
HAL
2018-02-13 17:15:05 +11:00
Mark Whitehorn
da69832140
AP_HAL_ChibiOS: add #ifdef around toneAlarm thread stack declaration
2018-02-13 07:27:02 +11:00
Mark Whitehorn
59b2d44323
AP_HAL_ChibiOS: make ToneAlarm compilation conditional on presence of
...
alarm pin
2018-02-11 14:55:23 +11:00
Mark Whitehorn
d569e35a0f
AP_HAL_ChibiOS: add toneAlarm support for ChibiOS on MindPX-v2
2018-02-11 14:55:23 +11:00
Mark Whitehorn
6baad37e47
AP_HAL_ChibiOS: add ICM208060-am to SPI device table in fmuv3/hwdef.dat
2018-02-11 14:55:23 +11:00
Mark Whitehorn
13c54c0543
AP_HAL_ChibiOS: add missing declaration in chibios_hwdef.py
2018-02-11 14:55:23 +11:00
Mark Whitehorn
3a40ba1d3e
AP_HAL_ChibiOS: add buzzer support to hwdef.dat for fmuv3
2018-02-11 14:55:23 +11:00
Mark Whitehorn
fb142422f6
AP_HAL_ChibiOS: pull ALARM_CHANNEL into pwmGroup
...
and improve formatting of HAL_PWM_ALARM in hwdef.h
2018-02-11 14:55:23 +11:00
Mark Whitehorn
8b216cf182
AP_HAL_ChibiOS: add ToneAlarm thread
...
fmuv4 hwdef.dat: remove PWM label from buzzer output pin
add buzzer pin labeled ALARM
remove timer PWM from HAL_PWM_GROUPs
2018-02-11 14:55:23 +11:00
Andrew Tridgell
10f940c8d0
HAL_ChibiOS: adjust RCIN pin settings for fmuv4
...
thanks to Mark for this change
2018-02-09 10:14:53 +11:00
Andrew Tridgell
9301e4888a
HAL_ChibiOS: make not having bus lock a soft error
...
this is nicer for driver developers
2018-02-09 10:14:49 +11:00
Andrew Tridgell
2b86c0e962
HAL_ChibiOS: tweak DMA settings for skyviper-v2450
...
this resolves a problem with the cypress radio.
Thanks to Sid for working this out
2018-02-08 22:15:41 +11:00
Andrew Tridgell
8226530610
HAL_ChibiOS: added DMA_PRIORITY and DMA_NOSHARE options
...
this allows finer grained control of DMA streams
2018-02-08 22:13:00 +11:00
Andrew Tridgell
507fcb0f27
Tools: moved make_abin.sh into Tools/scripts
...
will be used in px4 build
2018-02-08 18:56:51 +11:00
Andrew Tridgell
4ce0c2c827
HAL_ChibiOS: simplify skyviper-v2450 config
...
remove unused peripherals
2018-02-08 17:36:33 +11:00
Andrew Tridgell
b90c0d78f3
HAL_ChibiOS: fixed build warning
2018-02-08 17:36:33 +11:00
Andrew Tridgell
8eff43a352
HAL_ChibiOS: fixed printf arguments
2018-02-08 17:36:33 +11:00
Andrew Tridgell
aee6462deb
HAL_ChibiOS: enable I2C clearing on F412 board only
...
may be needed on other boards in the future, but for now we only know
its needed on an I2C 20789, which is rare
2018-02-08 17:36:33 +11:00
Siddharth Purohit
40142e5aef
ChibiOS: implement way to clear i2c bus by toggling clock line
2018-02-08 17:36:33 +11:00
Andrew Tridgell
0d089e8116
HAL_ChibiOS: fixed F412 OF reset pin
2018-02-08 17:36:33 +11:00
Andrew Tridgell
3c3389a005
HAL_ChibiOS: raise I2C bus priority on F412
...
needed for good scheduling with I2C IMU
2018-02-08 17:36:33 +11:00
Andrew Tridgell
20a008c80a
HAL_ChibiOS: disable trace buffers
...
these were unusued but still allocated
2018-02-08 17:36:33 +11:00
Andrew Tridgell
875008f2a6
HAL_ChibiOS: lock all DMA channels on reboot
...
this fixes a problem with the ICM-20789 on I2C where a reboot while the bus is active
leaves the IMU in a dead state where it can't be recovered without a power cycle.
2018-02-08 17:36:33 +11:00
Andrew Tridgell
6faace278a
HAL_ChibiOS: run i2c at 400kHz on F412
2018-02-08 17:36:33 +11:00
Andrew Tridgell
9f53ae1ea4
HAL_ChibiOS: added F412-rev1 hwdef.dat
2018-02-08 17:36:33 +11:00
Andrew Tridgell
47ce37f463
HAL_ChibiOS: report I2C clock downgrades
2018-02-08 17:36:33 +11:00
Andrew Tridgell
73418519eb
HAL_ChibiOS: enable analog debug on F412
2018-02-08 17:36:33 +11:00
Andrew Tridgell
fd824e6258
HAL_ChibiOS: enable toy mode on F412
2018-02-08 17:36:33 +11:00
Andrew Tridgell
d208dc69d3
Tools: moved make_abin.sh into ChibiOS scripts
2018-02-08 17:36:33 +11:00
Andrew Tridgell
4aa604a193
HAL_ChibiOS: enable pixartflow on skyviper-V2450
2018-02-08 17:36:33 +11:00
Andrew Tridgell
591e0c2249
HAL_ChibiOS: allow control of interrupt port
...
F412 has radio IRQ on port B
2018-02-08 17:36:33 +11:00
Andrew Tridgell
3cacb1d4b5
HAL_ChibiOS: commented the motor order in hwdef
2018-02-08 17:36:33 +11:00
Andrew Tridgell
f3f6972fc0
HAL_ChibiOS: output panics on system console
2018-02-08 17:36:33 +11:00
Andrew Tridgell
75226ba187
HAL_ChibiOS: enable logging on MindPX-v2
...
not working yet, seems to be a problem with SDIO interface
2018-02-07 20:33:45 +11:00
Andrew Tridgell
4548fd4d2f
HAL_ChibiOS: changed RCIN to PULLDOWN
...
this fixes a high cpu load with no receiver connected
2018-02-07 20:33:45 +11:00
Andrew Tridgell
86189393a7
HAL_ChibiOS: fixed build warnings
2018-02-07 20:33:45 +11:00
Andrew Tridgell
4886ffbf8a
HAL_ChibiOS: fixed build warnings
2018-02-07 20:33:45 +11:00
Andrew Tridgell
30e4323c6d
HAL_ChibiOS: disable USART1 till USB problem solved
...
using USART1 causes USB disconnects. The behaviour is like CTS/RTS is
enabled on USART1, but it is disabled.
2018-02-07 20:33:45 +11:00
Andrew Tridgell
d0eb2970c7
HAL_ChibiOS: ensure RTS and CTS are both disabled for no flow control
2018-02-07 20:33:45 +11:00
Andrew Tridgell
82f1f462ae
HAL_ChibiOS: ensure we don't init a uart driver twice
2018-02-07 20:33:45 +11:00
Andrew Tridgell
ad5a04fc89
HAL_ChibiOS: added NODMA option
...
this allows a peripheral to be configured without DMA (for low-use
UARTs)
2018-02-07 20:33:45 +11:00
Andrew Tridgell
74f4d5a3c9
HAL_ChibiOS: push MPU6500 to 4MHz on mindpx-v2
2018-02-07 20:33:45 +11:00
Andrew Tridgell
f1ce321a2f
HAL_ChibiOS: added checking of bus owner
...
this ensures all bus transfers are only done by the thread that owns
the semaphore
2018-02-07 20:33:45 +11:00
Andrew Tridgell
fa68210210
HAL_ChibiOS: fixed build with older compilers
2018-02-07 20:33:45 +11:00
Andrew Tridgell
626632989e
HAL_ChibiOS: fixed build for boards with no USB
2018-02-07 20:33:45 +11:00
Andrew Tridgell
41758348e5
HAL_ChibiOS: added checking of lock state in shared_dma
...
and use lock around check for tx completion in UART handler
2018-02-07 20:33:45 +11:00
Andrew Tridgell
dce4c90467
HAL_ChibiOS: moved UART thread to UART driver
...
use an event model for triggering sends from tx complete DMA handler
for unbuffered uarts
2018-02-07 20:33:45 +11:00
Andrew Tridgell
5fc12f82fb
HAL_ChibiOS: expanded interrupt stack to 256
...
this is very conservative, and may be trimmed later based on analysis
of stack usage
2018-02-07 20:33:45 +11:00
Andrew Tridgell
aae1cc22f4
HAL_ChibiOS: updated USB device strings
...
use defaults or add in serial number
2018-02-07 20:33:45 +11:00
Andrew Tridgell
4b8bde746e
HAL_ChibiOS: improved default USB strings
...
use board name and serial number to make IDs unique
2018-02-07 20:33:45 +11:00
Andrew Tridgell
23e1b2e271
HAL_ChibiOS: added paranoid state checking on I2C
...
this is here just while debugging an issue with Mark
2018-02-07 20:33:45 +11:00
Andrew Tridgell
7e19f49e42
HAL_ChibiOS: fixed DMA lock in SoftSigReader
2018-02-07 20:33:45 +11:00
Andrew Tridgell
1aa6a0068a
HAL_ChibiOS: fixed order of I2C DMA
...
this was harmless, but confusing for debugging
2018-02-07 20:33:45 +11:00
Andrew Tridgell
111e5b6268
HAL_ChibiOS: change USB ID for revo-mini
2018-02-07 20:33:45 +11:00
Andrew Tridgell
4d018cf5e2
HAL_ChibiOS: take lock on DMA allocate/deallocate
...
this is required for the stm32_dma_stream bitmask manipulation
2018-02-07 20:33:45 +11:00
Andrew Tridgell
bc49c0d2c5
HAL_ChibiOS: make hwdef.h the same on python2 and python3
...
and output to /tmp by default to prevent accidental use of old hwdef.h
in the build
2018-02-07 20:33:45 +11:00
Andrew Tridgell
e002fbdb8d
HAL_ChibiOS: fixed a build warning
2018-02-07 20:33:45 +11:00
Andrew Tridgell
077aa24c6d
HAL_ChibiOS: add more pins for revo-mini port
2018-02-07 20:33:45 +11:00
Andrew Tridgell
e91144cc8e
HAL_ChibiOS: allow for empty UART drivers
...
allows for boards with no default GPS port
2018-02-07 20:33:45 +11:00
Andrew Tridgell
e0212ebe85
HAL_ChibiOS: cope with ETR timer channels
...
trean the ETR capability as a separate AF
2018-02-07 20:33:45 +11:00
Andrew Tridgell
c1df2a8a4b
HAL_ChibiOS: cope with timers 10 and later
2018-02-07 20:33:45 +11:00
Andrew Tridgell
d191b37520
HAL_ChibiOS: cope with having no ADC inputs
2018-02-07 20:33:45 +11:00
Andrew Tridgell
87389e0fdc
HAL_ChibiOS: fixed double DMA allocation on i2c
2018-02-07 20:33:45 +11:00
Andrew Tridgell
19e1349d0a
HAL_ChibiOS: setup serial5 for fmuv3 ESP8266
2018-02-07 20:33:45 +11:00
Andrew Tridgell
560948dc69
HAL_ChibiOS: fixed GPIOs for ESP8266 port
2018-02-07 20:33:45 +11:00
Andrew Tridgell
fa96e23552
HAL_ChibiOS: setup correct volt and current pins
...
use hwdef.dat to specify battery pins
2018-02-07 20:33:45 +11:00
Andrew Tridgell
85acbcb21d
HAL_ChibiOS: fixed UART send from TX complete IRQ
2018-02-07 20:33:45 +11:00
Andrew Tridgell
63a825dd2c
HAL_ChibiOS: don't call spiStart() unless bus is stopped
2018-02-07 20:33:45 +11:00
Andrew Tridgell
e29b79f41b
HAL_ChibiOS: fixed DMA allocation bug on SPI
...
thanks to Mark Whitehorn for finding this crash
2018-02-07 20:33:45 +11:00
Andrew Tridgell
29add8a880
HAL_ChibiOS: fixed build without FATFS enabled
2018-02-07 20:33:45 +11:00
Andrew Tridgell
6b187b393a
HAL_ChibiOS: fixed fmuv4 build
2018-02-07 20:33:45 +11:00
Siddharth Purohit
e1a8bba58b
HAL_ChibiOS: increase the stack size for uavcan thread
2018-02-07 20:33:45 +11:00
Siddharth Purohit
77f8acd7a1
HAL_ChibiOS: add CAN to supported peripherals list
2018-02-07 20:33:45 +11:00
Siddharth Purohit
6f21c1583f
HAL_ChibiOS: add definitions to support uavcan in fmuv3
2018-02-07 20:33:45 +11:00
Siddharth Purohit
edd0e8d2f5
HAL_ChibiOS: add CANManager to ChibiOS namespace
2018-02-07 20:33:45 +11:00
Siddharth Purohit
143686f70d
HAL_ChibiOS: add placeholder cstdio header
2018-02-07 20:33:45 +11:00
Siddharth Purohit
539d5adc13
hwdef: add more posix methods
2018-02-07 20:33:45 +11:00
Siddharth Purohit
288f6b1fa0
HAL_ChibiOS: add chibios cpp wrapers, libuavcan's stm32 driver uses it
2018-02-07 20:33:45 +11:00
Siddharth Purohit
f2e77ab773
AP_HAL_ChibiOS: add uavcan thread
2018-02-07 20:33:45 +11:00
Siddharth Purohit
3c009cf02c
AP_HAL_ChibiOS: add CAN driver
2018-02-07 20:33:45 +11:00
Andrew Tridgell
b992b5e02a
HAL_ChibiOS: allow for 16kHz brushed on all timers
2018-02-07 20:33:45 +11:00
Andrew Tridgell
b0d0ee1f01
HAL_ChibiOS: reformat using yapf and support python3
...
allow hwdef.h compilation using python3
2018-02-07 20:33:45 +11:00
Andrew Tridgell
67e0ba22fe
HAL_ChibiOS: fixed some errors in F405 tables
2018-02-07 20:33:45 +11:00
Andrew Tridgell
70ff3871e0
HAL_ChibiOS: fixed RC in on CH1 of timer
2018-02-07 20:33:45 +11:00
Andrew Tridgell
890d322b47
HAL_ChibiOS: starting on mini-pix hwdef.dat
...
for RadioLink mini-pix board
2018-02-07 20:33:45 +11:00
Andrew Tridgell
23555f4c25
HAL_ChibiOS: allow for empty storage during bringup
...
useful when storage backend driver isn't written yet
2018-02-07 20:33:45 +11:00
Andrew Tridgell
ecce2a73d0
HAL_ChibiOS: Storage::_timer_tick is an override
2018-02-07 20:33:45 +11:00
Andrew Tridgell
713006bb1d
HAL_ChibiOS: allow more OTG defines to be overridden
2018-02-07 20:33:45 +11:00
Andrew Tridgell
1fb257a35a
HAL_ChibiOS: initial hwdef.dat for revo mini
2018-02-07 20:33:45 +11:00
Andrew Tridgell
979a2a4796
HAL_ChibiOS: removed debug code
2018-02-07 20:33:45 +11:00
Siddharth Purohit
538af2a58a
HAL_ChibiOS: fix parity and stop bit setting
2018-02-07 20:33:45 +11:00
Mark Whitehorn
b94b1dcd97
AP_HAL_ChibiOS: add missing declaration
2018-02-07 20:33:45 +11:00
Siddharth Purohit
df4bf7e476
HAL_ChibiOS: fix irq clash with unnecessary access to readbuf ring buffer
2018-02-07 20:33:45 +11:00
Siddharth Purohit
02696882e9
HAL_ChibiOS: if unbuffered write, do continue to invoke DMA writes
...
adds higher latency to device sharing DMA
2018-02-07 20:33:45 +11:00
proficnc
c613c0bde2
added the cube red hardware definition
2018-02-07 20:33:45 +11:00
Andrew Tridgell
3dacbd1b36
HAL_ChibiOS: hold write lock for unbuffered writes
2018-02-07 20:33:45 +11:00
Andrew Tridgell
ad26ca4a27
HAL_ChibiOS: implement parity and stop bits controls
2018-02-07 20:33:45 +11:00
Andrew Tridgell
2e15285c51
HAL_ChibiOS: refuse unbuffered writes without DMA
...
we would need much more complex code to handle this
2018-02-07 20:33:45 +11:00
Andrew Tridgell
3f2cc2c9d6
HAL_ChibiOS: implement low latency UART writes
...
this implements the set_unbuffered_writes() API by performing writes
directly in the write() call and not from a timer
2018-02-07 20:33:45 +11:00
Andrew Tridgell
015c3a1fa3
HAL_ChibiOS: removed duplicate defines
2018-02-07 20:33:45 +11:00
Andrew Tridgell
865e4f3104
HAL_ChibiOS: implement _timer_tick in UARTDriver
2018-02-07 20:33:45 +11:00
Andrew Tridgell
a5bafb399f
HAL_ChibiOS: adjust SPI pin speeds
2018-02-07 20:33:45 +11:00
Andrew Tridgell
7b251c9739
HAL_ChibiOS: lower FRAM CS speed to 2MHz
...
this matches old firmware
2018-01-20 17:40:07 +11:00
Andrew Tridgell
30fd2da108
HAL_ChibiOS: enable RTSCTS and SBUS_OUT
2018-01-20 17:40:07 +11:00
Andrew Tridgell
63671b06a8
HAL_ChibiOS: added HAL_I2C_MAX_CLOCK define
2018-01-20 17:40:07 +11:00
Andrew Tridgell
88f11f5a50
HAL_ChibiOS: added HAL_I2C_BUS_BASE
...
this allows fmuv4 to start at bus 1
2018-01-20 17:40:07 +11:00
bugobliterator
c60c0b8ab1
HAL_ChibiOS: fix undef line processing
2018-01-20 17:40:07 +11:00
Andrew Tridgell
8286486890
HAL_ChibiOS: drop default SPI priority to 179
2018-01-20 17:40:07 +11:00
Andrew Tridgell
ab748034a2
HAL_ChibiOS: removed RC inversion logic
...
not needed any more
2018-01-20 17:40:07 +11:00
bugobliterator
7db19cfae0
HAL_ChibiOS: use separate parameter for detect timeout
2018-01-20 17:40:07 +11:00
Andrew Tridgell
613d7a47ba
HAL_ChibiOS: support RCIN on mindpx-v2
2018-01-20 17:40:07 +11:00
bugobliterator
02c7513f83
HAL_ChibiOS: add invert method and fix width measurement
2018-01-20 17:40:07 +11:00
bugobliterator
f7ac5aa079
HAL_ChibiOS: put rcin on a separate thread
2018-01-20 17:40:07 +11:00
Andrew Tridgell
f50f427a59
HAL_ChibiOS: added comment on beta fmuv4 board
2018-01-20 17:40:07 +11:00
Andrew Tridgell
743806116d
HAL_ChibiOS: removed unusued ppm driver
...
now uses AP_RCProtocol
2018-01-20 17:40:07 +11:00
Andrew Tridgell
ccb85c2707
HAL_ChibiOS: fixed fmuv3 build with no ICU
2018-01-20 17:40:07 +11:00
Andrew Tridgell
33c7cba9af
HAL_ChibiOS: use more efficient push mechanism in IRQ
...
and don't use push_force() as it is not safe to do reads from within
the producer
2018-01-20 17:40:07 +11:00
Andrew Tridgell
7a4f429b85
HAL_ChibiOS: don't adjust buffer size for protocol
...
its all about IRQ latency, not IRQ rate
2018-01-20 17:40:07 +11:00
Andrew Tridgell
e2c8fe27ef
HAL_ChibiOS: fixed memory handling in SoftSigReader
2018-01-20 17:40:07 +11:00
bugobliterator
eeea2c9961
HAL_ChibiOS: use software signal reader for RCInput if available
2018-01-20 17:40:07 +11:00
bugobliterator
6be4c710c3
HAL_ChibiOS: add Software Signal reader using timer and DMA
2018-01-20 17:40:07 +11:00
bugobliterator
1db1ff799e
HAL_ChibiOS: modify hwdef scripts to setup for generic RCIN
2018-01-20 17:40:07 +11:00