Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
65,006 Commits 71 Branches 509 Tags 814 MiB
Commit Graph

3280 Commits

Author SHA1 Message Date
Andy Piper 2415c2998b AP_HAL_ChibiOS: allow dshot to be used even if bdshot was specified. 
correct zero handling in bdshot decoding
 2023-12-18 19:02:52 +11:00
Andy Piper 8c03c9e4bf AP_HAL_ChibiOS: cache values of io_dshot() and io_enabled() 
enabled shared_up_dma to be fully compiled out
address some minor review comments
 2023-12-18 19:02:52 +11:00
Andy Piper a5b6c3b5ef AP_HAL_ChibiOS: utility to print out bdshot encoded data 2023-12-18 19:02:52 +11:00
Andy Piper 9f30d01561 AP_HAL_ChibiOS: bdshot for f103 iofirmware 
add support to tell if shared DMA channel is actually shared
avoid starting and stopping the timer peripheral with bdshot
ensure that rcout DMA allocation and deallocation happens entirely within the lock
increase rcout thread working area for bdshot
fix mode mask that is sent to the iomcu
ensure iomcu rcout thread gets timeouts for callbacks
control bdshot input and output line levels on f103
use input capture channel pairs to read rising and falling edges of telemetry on f103
reset channel pairs together on iomcu
generalize the bdshot input path to support suitable buffer sizes for iomcu
generalize DMAR reading of CCR registers to read two at a time on iomcu
enable bi-directional dshot channels on PWM1-4 on iomcu
add methods to directly access erpm values from rcout
update erpm mask and esc telemetry correctly for firmware supporting dshot
add support for propagating bdmask to iomcu
dshot commands to all channels need to be aware of iomcu
ensure esc type is propagated to iomcu
cope with iomcu channel numbering when using EDT
ensure pwm driver is reset properly for dshot commands on iomcu
correctly reset pwm for dshot commands
correctly mask off bdshot bits going to iomcu
don't reset GPIO modes on disabled lines
don't reset pwm_started when sharing DMA channels
set thread name on iomcu rcout and reduce stack size on iomcu
ensure that bdshot pulses with no response are handled correctly
correctly setup DMA for input capture on f103
deal with out of order captured bytes when decoding bdshot telemetry
ensure DMA sharing on f103 does not pull lines low
only disable the timer peripheral when switching DMA channels on iomcu
add support for waiting for _UP to finish before proceeding with dshot
re-order iomcu dshot channels to let TIM4_UP go first
ensure that a cascading event will always come when expected on rcout
allow timeouts when using cascading dshot
always rotate telemetry channel after trying to capture input
cater for both in order and out-of-order bdshot telemetry packets
cope with reversed packets when decoding bdshot telemetry
ensure UP DMA channel is fully free on iomcu before starting next dshot cycle
refactor rcout for iofirmware into separate file
 2023-12-18 19:02:52 +11:00
tomas.vrsansky e6feebb2fb AP_HAL_ChibiOS: add hwdef files for Airvolute DCS2 onboard FMU 
added ethernet config to hwdef
updated readme.md
hwdef: MAC parameters redefined according to ChibiOS
hwdef: add default params for Airvolute DCS2 on board FMU
update according to new changes in ChibiOS MAC driver
added defines to support ethernet communication
bootloaders: Airvolute-DCS2
 2023-12-12 11:09:09 +11:00
Andrew Tridgell a4fb05de95 HAL_ChibiOS: increase LWIP windows 
now getting 6.8MByte/s with NET_TESTS=4
 2023-12-11 18:00:38 +11:00
Andrew Tridgell 28885dca4c HAL_ChibiOS: adjust buffer sizes 
this fixes issues with TCP accepts being lost in web server
 2023-12-11 18:00:38 +11:00
Andrew Tridgell f603f045b5 HAL_ChibiOS: make lwip debugging easier 
use ap_networking_printf wrapper
 2023-12-11 18:00:38 +11:00
Andrew Tridgell 436c60c7de HAL_ChibiOS: defaults to 50 socket limit 
makes for more useful web server
 2023-12-11 18:00:38 +11:00
bugobliterator 00a65632eb AP_HAL_ChibiOS: add support for swapping ICM42688 with ICM45686 2023-12-06 13:34:52 +11:00
bugobliterator e34e9c61aa AP_HAL_ChibiOS: disable core m4 use to silence the chibios asserts 
checking allocation of peripherals
 2023-12-06 13:31:26 +11:00
Andy Piper cca8f8219a hwdef: new variant of KakuteH7 using ICM42688 2023-12-05 11:41:08 +11:00
Andy Piper 0cc5cf7d2d AP_HAL_ChibiOS: allow betaflight converter to run on output from "dump hardware" 2023-12-05 11:38:53 +11:00
Martin Luessi 6e417f1d0c RADIX2HD: Set HAL_I2C_INTERNAL_MASK 2023-12-05 11:37:57 +11:00
jfbblue0922 c16e1a28df AP_HAL_ChibiOS/hwdef: changed defaults parm in JFB110 board definition 
Co-authored-by: Randy Mackay <rmackay9@yahoo.com>
 2023-11-28 15:58:53 +09:00
Andrew Tridgell f471732aad HAL_ChibiOS: enable SO_REUSEADDR 2023-11-28 12:18:55 +11:00
Andrew Tridgell 0659ab8ef4 HAL_ChibiOS: increase max TCP resources 2023-11-28 12:18:55 +11:00
Henry Wurzburg d9d5e91110 hwdef: update SDH7V1 readme 2023-11-28 11:47:32 +11:00
daniel.li e6b7daa323 AP_HAL_ChibiOS: Add Aocoda-RC-H743Dual target 2023-11-28 10:29:23 +11:00
Thomas Watson 87fef1ae5d AP_HAL_ChibiOS: use get_HAL_mutable() to install new CAN interfaces 
Avoids dubious extern redefinition.
 2023-11-28 08:24:25 +11:00
Thomas Watson a9ddadee3b AP_HAL_ChibiOS: introduce get_HAL_mutable() to complement get_HAL() 
Returns a mutable reference to the same HAL for certain purposes where
the HAL needs to be mutated to avoid UB problems with casting away const
and to make the fact that mutation is happening obvious.
 2023-11-28 08:24:25 +11:00
Tom Pittenger 1f7b4d0938 AP_HAL_ChibiOS: set AP_BATTERY_WATT_MAX_ENABLED 0 for minimize 2023-11-26 11:57:14 +11:00
Tom Pittenger cd6a656acf AP_HAL_ChibiOS: set AP_BATTERY_WATT_MAX_ENABLED 0 for periph 2023-11-26 11:57:14 +11:00
Peter Barker 27f836b66e hwdef: correct ARK_CANNODE compilation 
this was turning SPI on when there aren't any devices...
 2023-11-25 13:47:13 -08:00
alexklimaj ddba794420 hwdef: ark_rtk_gps fix safety led 2023-11-25 13:45:56 -08:00
Peter Barker e9fc99b1bf AP_HAL_ChibiOS: base HAL_USE_SPI on devices not buses 
fixes compilation problem with gcc 10.3

../../libraries/AP_HAL_ChibiOS/SPIDevice.cpp: In static member function 'static void ChibiOS::SPIDeviceManager::__static_initialization_and_destruction_0(int, int)':
../../libraries/AP_HAL_ChibiOS/SPIDevice.cpp:76:18: error: statement has no effect [-Werror=unused-value]
   76 | ChibiOS::SPIDesc SPIDeviceManager::device_table[] = { HAL_SPI_DEVICE_LIST };
      |                  ^~~~~~~~~~~~~~~~
compilation terminated due to -Wfatal-errors.
cc1plus: some warnings being treated as errors
 2023-11-22 18:14:00 +11:00
Peter Barker 15e0f689c2 AP_HAL_ChibiOS: correct AP_Filter defines 
- checking the build type is very rarely used and definitely not required here
 - fix boilerplate to conform to normal pattern of including the config header and #if'ing based on the _ENABLED directly after that
 2023-11-21 21:13:42 +11:00
Andy Piper 229916a48c AP_HAL_ChibiOS: enable serial LEDs on ARK_CANNODE 2023-11-20 19:23:06 +11:00
Andy Piper 73610c8932 AP_HAL_ChibiOS: return success status from serial_led_send and set_serial_led_rgb_data 2023-11-20 19:22:20 +11:00
Andy Piper b7fd04318a AP_HAL_ChibiOS: fix race condition in sending serial LED data 2023-11-20 19:22:20 +11:00
Andrew Tridgell 2ba4bf1478 HAL_ChibiOS: allow for --disable-networking 2023-11-17 10:54:24 -08:00
Andrew Tridgell 6bf3debe73 HAL_ChibiOS: default disable ICE in periph 2023-11-17 13:09:02 +11:00
Tom Pittenger ac16f10ecd AP_HAL_ChibiOS: hwdef kha_eth to show SerialManager params 2023-11-16 10:58:50 -08:00
Jonathan Loong 16c55a3bc1 AP_HAL_ChibiOS: Add in CarbonixF405 QMC5883P compass enable 2023-11-15 10:53:38 +11:00
Jonathan Loong 8d64d5215e AP_Periph: CarbonixL496 crystal hwdef changes 2023-11-15 10:53:38 +11:00
Andy Piper 7639761d28 AP_HAL_ChibiOS: correct neopixel bitwidth 
Use 64-bit timestamps for dshot send checks
 2023-11-14 11:06:25 +11:00
Henry Wurzburg 4681e5fba6 hwdef:correct JFB110 defaults 2023-11-14 10:55:33 +11:00
Andrew Tridgell 2f9bfb648f HAL_ChibiOS: default RTS pins to PULLDOWN 
this avoids issues with SiK and RFD900x radios getting stuck in
bootloader mode due to a high RTS pin on power on.

We did this for Pixhawk6C in this PR:
https://github.com/ArduPilot/ardupilot/pull/24169

this now applies it to all boards
 2023-11-12 07:26:50 +11:00
Cedric0489 95dbb7a3f5 AP_HAL_ChibiOS: added PixPilot-C3 2023-11-10 17:14:18 +11:00
Henry Wurzburg ba76d4e2f9 hwdef:save flash on FlywooF405S-AIO 2023-11-09 12:49:13 +11:00
Andrew Tridgell 7b6ad15f90 hwdef: make f103-QiotekPeriph a single compass 
dual compass periph is not supported
 2023-11-08 18:34:41 +11:00
Peter Barker d2a3fed4a1 hwdef: AP_BATTERY_ESC_ENABLED needs HAL_WITH_ESC_TELEM 2023-11-08 18:05:55 +11:00
yjuav f7dd6dec96 hwdef: add YJUAV_A6SE_H743 board support 2023-11-07 10:31:20 +11:00
jfbblue0922 7d4d2f98bf AP_HAL_ChibiOS: corrected analog input pin number 2023-11-02 19:08:09 +11:00
bugobliterator 5bd5aa87a7 AP_HAL_ChibiOS: add CubeNode pinout diagram 2023-11-01 14:18:02 +00:00
Andy Piper 2bef8f2cad AP_HAL_ChibiOS: add support for SpeedyBeeF405v4 2023-11-01 19:25:19 +11:00
Andrew Tridgell cd3eab3c5d hwdef: support Holybro Pixhawk6X_Rev6 2023-10-31 10:42:25 +11:00
Andrew Tridgell 6173726846 HAL_ChibiOS: fail on badly formed SPIDEV line 2023-10-31 10:42:25 +11:00
Peter Barker 9dbd6f335a hwdef: minimize_features on mini-pix, not minimize_fpv_osd 2023-10-31 09:13:01 +11:00
Henry Wurzburg e474305c6d hwdef:free flash for space critical bds 2023-10-28 13:32:19 +11:00
Peter Barker f70a510c6b AP_HAL_ChibiOS: move AP_BOOTLOADER_FLASHING_ENABLED default to AP_HAL 
.... need the defines on HALs other than ChibiOS
 2023-10-27 14:16:47 +11:00
Peter Barker 90607ffa5f hwdef: remove payload place from minimized boards 2023-10-27 14:15:53 +11:00
Peter Barker ba72b7edfd hwdef: fix speedybeef4v3 build 
double-definition
 2023-10-26 18:15:30 +11:00
Peter Barker 8e5708b6f2 speedybeef4: remove redefinition of AP_BATTERY_SYNTHETIC_CURRENT_ENABLED 2023-10-26 18:15:30 +11:00
Peter Barker f5045384cf hwdef: correct ReaperF745 build 2023-10-26 18:15:30 +11:00
Peter Barker b757319245 hwdef: fix KakuteF4Mini build 
redefinition
 2023-10-26 18:15:30 +11:00
Peter Barker 38db3d8cbc hwdef: fix F35Lightning build 
.... and remove redundantdefine
 2023-10-26 18:15:30 +11:00
Andy Piper 9ba9553d96 AP_HAL_ChibiOS: NFC refactor of dshot/bdshot in preparation for bdshot on iomcu 2023-10-25 19:30:35 +11:00
Andy Piper fee43af729 AP_HAL_ChibiOS: enable highres sampling on CubeOrangePlus 2023-10-25 19:23:11 +11:00
Peter Barker b86c5b7eea hwdef: remove unused HAL_NO_LOGGING define from hwdefs 2023-10-25 19:17:18 +11:00
Peter Barker 28e89505fe hwdef: remove redundant HAL_GCS_ENABLED lines 2023-10-25 19:17:18 +11:00
Peter Barker 6152059843 hwdef: rearrange FlyingMoonH743 IMU order 2023-10-25 09:47:43 +11:00
Peter Barker 782b51b89b hwdef: rearrange FlyingMoonF427 IMU order 2023-10-25 09:47:43 +11:00
Tom Pittenger 4dc9d1ebc7 AP_HAL_ChibiOS: enable scripting on CubeOrange-periph-heavy 2023-10-23 22:44:35 -07:00
Henry Wurzburg 5c546dedcb hwdef:include minimal in minimize_common 2023-10-24 12:20:41 +11:00
Andy Piper 51793ef5ca hwdef: bugfixes for BETAFPV-F405 2023-10-24 11:44:54 +11:00
Martin Luessi 0970cb29c7 AP_HAL_ChibiOS: RADIX2HD Probe external I2C compasses 2023-10-24 10:44:57 +11:00
Martin Luessi 04564882fa AP_HAL_ChibiOS: Add UART7 to RADIX2HD target 2023-10-24 10:05:57 +11:00
Michael du Breuil 0739f0839f AP_HAL_ChibiOS: Add sw-spar-f407 periph target 2023-10-24 09:48:13 +11:00
bugobliterator fd319c6b2c AP_HAL_ChibiOS: fix setting APP_RAM size 
also allows passing APP_RAM_START index through hwdef
 2023-10-23 10:43:42 +11:00
Peter Barker 5b34a9bf13 hwdef: remove redundant MODE_TURTLE_ENABLED 
this is defined later in the file
 2023-10-19 20:53:28 +11:00
AerofoxTech 63f28b6720 hwdef: To adapt the rotation directionof the QMC5883L on new Aerofox-Airspeed-DLVR 2023-10-18 19:50:46 +11:00
AerofoxTech c0780a45c1 hwdef: Adapt the rotation direction of the QMC5883L 2023-10-18 19:50:10 +11:00
bugobliterator 1ae842e4ed AP_HAL_ChibiOS: add option to set HAL_SPI_SCK_SAVE_RESTORE 2023-10-18 19:25:19 +11:00
bugobliterator 6c13d7bee9 AP_HAL_ChibiOS: fix mode setting for ICM45686 on CubeOrangePlus 2023-10-18 19:25:19 +11:00
bugobliterator 57f6f8e34d AP_HAL_ChibiOS: add support for saving and restoring SCK pin state 
when SPI goes into undefined state during reset
 2023-10-18 19:25:19 +11:00
Andy Piper 7a937cd23a AP_HAL_ChibiOS: correct printing of timer information 2023-10-18 18:01:48 +11:00
Henry Wurzburg 42d4b2671b hwdef:fix bug in AtomRCF405NAVI,fix some bds that aren't building 2023-10-17 18:21:04 +11:00
Iampete1 e736d5ecb7 AP_HAL_ChibiOS: hwdef: scripts: defaults_periph: disable unused libaries by defualt 2023-10-17 10:23:20 +11:00
muramura e0a012919c hwdef: Cite CubeOrange-SimOnHW as the default file 2023-10-14 17:55:56 +11:00
Peter Barker 4b0958fb4f hwdef: correct compilation of CubeOrange-SimOnHW 
../../libraries/AP_InertialSensor/AP_InertialSensor_config.h:20:2: error: #error "INS_AUX_INSTANCES must be zero if INS_MAX_INSTANCES is less than 3"
   20 | #error "INS_AUX_INSTANCES must be zero if INS_MAX_INSTANCES is less than 3"
      |  ^~~~~
 2023-10-13 17:26:35 +11:00
jfbblue0922 0f1e766269 AP_HAL_ChibiOS: JFB110 board definition 
Co-authored-by: Randy Mackay <rmackay9@yahoo.com>
 2023-10-12 17:03:04 +11:00
Peter Barker 28d827cedc AP_HAL_ChibiOS: add RTC support to GPS periphs that log 
this re-adds support for RTC into GPS peripherals that also log.  This was removed as these boards were calling methods on the nullptr
 2023-10-11 19:17:27 +11:00
Peter Barker cf96791fe2 AP_HAL_ChibiOS: add and use HAP_PERIPH_ENABLE_RTC 2023-10-11 19:17:27 +11:00
Peter Barker 53f4709a78 AP_HAL_ChibiOS: disable RTC on periphs 
the singleton isn't instantiated
 2023-10-11 19:17:27 +11:00
Henry Wurzburg 912a088c2b hwdef: Create correct README and add defaults to ease setup 2023-10-11 19:11:16 +11:00
muramura 007c3460ea AP_ChibiOS: Delete the same definition 2023-10-11 14:42:32 +11:00
rishabsingh3003 5897aab566 hwdef: add MatekL431 ADSB Periph 2023-10-09 16:18:13 -07:00
thu5cob 49d7d0b1c4 HAL_ChibiOS: Fix stm32l4+ flash issue 
stm32l4+ flash reset register has been reset properly
 2023-10-06 14:52:34 +11:00
Henry Wurzburg de7dd9d692 hwdef:add VTX power control to SpeedyBeeF405-Wing 2023-10-06 14:51:52 +11:00
Peter Barker 3b2dec7ec6 hwdef: CubeOrangePlus: build abin files 
... for use with flash-from-SD-card
 2023-10-05 18:55:48 +11:00
alexklimaj e1b991a84a hwdef: ARKV6X ADIS16507 example 2023-10-05 08:21:50 +11:00
Peter Barker fe9932855b hwdef: HerePro requires AHRS to compile 2023-10-04 18:10:58 +11:00
Andy Piper 9ff3d21c20 AP_HAL_ChibiOS: add support for NeoPixelRGB 2023-10-04 18:06:17 +11:00
Andrew Tridgell da0870f616 HAL_ChibiOS: enable mavlink bindings for ADSB periph 2023-10-02 21:45:28 +11:00
Peter Barker e2975a67e7 AP_HAL_ChibiOS: use AP_GPS_ENABLED to exclude more code when GPS not compiled in 2023-09-27 16:38:15 +10:00
Peter Barker 0824eca776 AP_GPS: use AP_GPS_ENABLED to exclude more code when GPS not compiled in 2023-09-27 16:38:15 +10:00
Andy Piper 82452758b4 AP_HAL_ChibiOS: write out serial ports that are available when configuring 2023-09-26 11:31:08 +10:00
James O'Shannessy 70bee8e67a AP_HAL_ChibiOS: Explicitly include InternalError 
Debug builds utilise internal error in the Util class.

The include was being passed up from Logger->LoggerMessageWriter->LoggerBackend->Bitmask.
Periph Builds tend not to have HAL_LOGGING_ENABLED, and so the include was not present.
 2023-09-20 19:51:48 +10:00
Andy Piper 36fc7521ea AP_HAL_ChibiOS: modify prescaler based on dshot type 2023-09-20 17:35:44 +10:00
Andy Piper 1b1e5b1085 hwdef: correct inversion pin on MambaF405v2 
correct battery setup for MambaF405v2
provide suitable serial defaults for MambaF405v2
reallocate DMA channels to allow full DMA on USART3 and NeoPixel on MambaF405v2
add camera control pin to MambaF405v2
 2023-09-19 11:43:58 +10:00
Henry Wurzburg d13085d4bb HWDEF:Correct hwdef of BETAFPV-F405 2023-09-19 08:03:58 +10:00
Andrew Tridgell ebffc8fc65 HAL_ChibiOS: fixed CAN statistics on F4/L4/F3/F7 2023-09-19 07:33:53 +10:00
subashchandar d1e8cef9b6 AP_HAL_ChibiOS: Increase limit for Storage pages 
STm32l4+ has 512 flash pages in dual flash mode
 2023-09-17 21:03:37 +10:00
subashchandar 2207f7bb14 AP_HAL_ChibiOS: change adc sampling rate 
STm32l4r5 adc sampling rate.
 2023-09-17 21:02:42 +10:00
Davide_Lentini 5b0d7928bd hwdef: Update luminousbee5 defaults.parm 2023-09-14 12:40:59 +10:00
Michael du Breuil dcfd9f6586 AP_HAL_ChibiOS: Add sw-nav-f405 target 
Navlight board with a compass, requires #24945 for status light to work
 2023-09-14 10:56:20 +10:00
Henry Wurzburg ae05df22eb HWDEF: Correct define errors in HEEWING and Tmotor bds 2023-09-14 10:38:01 +10:00
TunaLobster 6f80f8f200 AP_HAL_ChibiOS: Add hwdef for ARK_CANNODE 2023-09-13 17:06:02 +10:00
Andy Piper f02b34fc02 hwdef: mRoControlZeroOEMH7 bdshot version 2023-09-13 17:04:24 +10:00
Andy Piper feabd1f568 AP_HAL_ChibiOS: hwdef for Flywoo F405 Pro 2023-09-13 17:03:51 +10:00
Andy Piper 9387236e6c AP_HAL_ChibiOS: prefer bi-directional dshot channels that can be shared on F4 and F7 2023-09-13 17:03:51 +10:00
Andy Piper f3ac8f9d75 hwdef: SpeedyBeeF405Mini 2023-09-12 09:23:39 +10:00
cuav-chen2 13195464d5 hwdef: added ICP-20100 baro to CUAV_GPS 2023-09-08 18:03:02 +10:00
Ryan Friedman f92a6bf2b2 AP_HAL_ChibiOS: Remove executable permissions 
* Fixes a pre-commit violation; the ioc files are not supposed to be executable

Signed-off-by: Ryan Friedman <ryanfriedman5410+github@gmail.com>
 2023-09-08 17:09:26 +10:00
yjuav 914c3c702d hwdef: Modify YJUAV_A6SE board TIME12 to TIM8 2023-09-08 07:57:07 +10:00
Peter Barker 6bb5723b18 hwdef: fpv/osd boards get turtle, flowhold and msp 2023-09-06 20:32:06 +10:00
Peter Barker b9df48e2ec AP_HAL_ChibiOS: include hexa and octa frames in mimimize_fpv_osd 2023-09-06 20:32:06 +10:00
Peter Barker bc83de5eac hwdef: fpv/osd boards get CRSF Text and spektrum telemetry 2023-09-06 20:32:06 +10:00
Peter Barker 0400282416 hwdef: fpv/osd boards get Tramp 2023-09-06 20:32:06 +10:00
Peter Barker d3c32ba440 hwdef: add comments clarifying use of each of the minimize includes 2023-09-06 20:32:06 +10:00
Peter Barker 91e1dac053 hwdef: minimize_fpv_osd.inc: remove features not needed for fpv/osd 2023-09-06 20:32:06 +10:00
Peter Barker 7deb7e2c20 ArduCopter: disable turtle mode in minimize_features.inc 
instead of using the define.

This enables turtle mode on minimised fpv-osd boards.
 2023-09-06 20:32:06 +10:00
Peter Barker 472dda6555 AP_HAL_ChibiOS: disable turtle mode in minimize_features.inc 
instead of using the define.

This enables turtle mode on minimised fpv-osd boards.
 2023-09-06 20:32:06 +10:00
Peter Barker 19b066a46a hwdef: enable SmartAudio on fpv-osd boards 2023-09-06 20:32:06 +10:00
Peter Barker cdfabf2038 hwdef: enable RunCam on fpv-osd boards 2023-09-06 20:32:06 +10:00
Peter Barker 9dda151a2d hwdef: make soaring and crsf aailable on minimized-OSD boards 2023-09-06 20:32:06 +10:00
Peter Barker c29948c69a hwdef: do not remove OSD in common minimized boards 2023-09-06 20:32:06 +10:00
Peter Barker 1c07c875d6 hwdef: recreate minimize_features.inc to just include minimize_common.inc 2023-09-06 20:32:06 +10:00
Peter Barker d55c08009f hwdef: rename minimize_features.inc to minimize_common..inc 2023-09-06 20:32:06 +10:00
Andy Piper c6511b513b AP_HAL_ChibiOS: T-Motor H743 Mini 2023-09-06 17:13:07 +10:00
Andy Piper 194f555c7b AP_HAL_ChibiOS: provide mcu defaults in betaflight conversion 2023-09-06 17:13:07 +10:00
Andy Piper 2160a1afb4 AP_HAL_ChibiOS: correct hwdef generator battery scale 2023-09-06 17:13:07 +10:00
Andy Piper ee8631e9fd AP_HAL_ChibiOS: cope with different IMU drivers in hwdef conversion 2023-09-06 17:13:07 +10:00
Andrew Tridgell 698673b0b2 hwdef: reduced size of f103-periph bootloader 
serial not needed
 2023-09-06 11:21:51 +10:00
Andrew Tridgell 684385c7d5 hwdef: reduced size of Hitec-Airspeed bootloader 
serial not needed in bootloader
 2023-09-06 11:21:51 +10:00
Andrew Tridgell ea51aea2e5 hwdef: removed most CAN_APP_NODE_NAME defines 
both bootloader and AP_Periph now default to
"org.ardupilot.BOARD_NAME". This makes it much easier to find the
right firmware for update
 2023-09-06 11:21:51 +10:00
Andrew Tridgell fb5dba9d86 hwdef: disable HAL_USE_CAN on all boards except f103-periph 
setting HAL_USE_CAN uses the ChibiOS CAN driver instead of the AP_HAL
CAN driver. This is only used on the f103-periph as it significantly
reduces the size of the bootloader, which allows for f103 builds to
fit in the limited flash

on all other builds we are much better off using the HAL CAN driver as
it is much faster
 2023-09-06 11:21:51 +10:00
Andrew Tridgell fbd44dddd0 HAL_ChibiOS: enable ISRs during flash ops in bootloader 
this makes a huge difference in AP_Periph bootloader speeed, where
disabling interrupts prevents CAN packets from being received
 2023-09-06 11:21:51 +10:00
Peter Barker c7080825d3 AP_HAL_ChibiOS: chibios_hwdef.py: canonicalise AP_PERIPH env define 
before this change this environment variable is a string, which means anything checking it for truth will get back true even if it is empty ("") or the string zero ("0").  The existing is_periph_fw check only works because "1" != 0 - if it was "0" then it would still be considered a periph firmware
 2023-09-06 09:28:37 +10:00
Peter Barker f6f6b08af8 hwdef: include defaults.parm files from other identical defaults.parm 
where the files were identical and the board an obvious derivative, grab the defaults.parm from the other place.
 2023-09-05 11:37:19 +10:00
Davide_Lentini 5a996952f6 hwdef: Update defaults.parm luminousbee5 2023-09-05 07:29:26 +10:00
Andrew Tridgell ef3d42ee9d HAL_ChibiOS: fixed bootloader build with F4 CAN 2023-09-05 06:56:51 +10:00
Andrew Tridgell bc373354fc HAL_ChibiOS: enable CAN stats on AP_Periph for bxCAN interface 
this allows for dead interface detection
 2023-09-05 06:56:51 +10:00
Andrew Tridgell d5fbce0547 AP_HAL_ChibiOS: added last_transmit_us to CAN stats 2023-09-05 06:56:51 +10:00
Vincent Poon 1b6148cba8 hwdef: Restore I2C2 on HolybroG4_GPS 
I2C2 was removed by mistake previously, causing LED Driver to not function.
 2023-09-01 13:44:23 +10:00
Andrew Tridgell c0cd255135 hwdef: use HAL_PERIPH_ENABLE_PROXIMITY 2023-09-01 13:04:59 +10:00
subashchandar 3cfa13c0b2 AP_HAL_CHIBIOS: allow RCIN thread priority to be overridden 
Add provision to change Rcin thread priority
-needed to increase priority for some low speed cpu
 2023-08-31 09:24:05 +10:00
Iampete1 2fbc27584b AP_HAL_ChibiOS: default to 0 battery capacity on periph 2023-08-30 12:25:46 +10:00
Peter Barker b751224ae1 hwdef: don't include solo gimbal or oreoled on thepeach autopilots 2023-08-29 11:14:15 +10:00
Andrew Tridgell 8888cac10f hwdef: added DMA for USART3 for MatekL431-RC and GPS 
this allows for faster connections

also added 4 PWM output requested by Josh and Sampson
 2023-08-29 08:00:20 +10:00
Tim Tuxworth 2850740bd8 hwdef: added QiotekAdeptF407 2023-08-26 21:14:15 +10:00
Andrew Tridgell e1f3cb9f71 hwdef: added AR-F407SmartBat 
balance plug DroneCAN periph node
 2023-08-26 21:12:42 +10:00
Andrew Tridgell 202e71482f HAL_ChibiOS: support CKS32F407 MCU 
based on STM32F407
 2023-08-26 21:12:42 +10:00
Andrew Tridgell 999919424b hwdef: allow for MCO pin to be configured 
this allows for hwdef.dat lines like this:

  PA8 MCO1 RCC
  PC9 MCO2 RCC

you can control the scaling by defining the following:

- STM32_MCO1SEL
- STM32_MCO1PRE_VALUE
- STM32_MCO2SEL
- STM32_MCO2PRE_VALUE
 2023-08-25 07:37:12 +10:00
MallikarjunSE 00879e9b0b AP_HAL_ChibiOS/hwdef: Add hwdef for Sierra True series periphs 2023-08-24 17:47:05 +10:00
MallikarjunSE 5e6591fa58 AP_HAL_ChibiOS/hwdef: Add hwdef for Sierra-PrecisionPoint 2023-08-24 17:45:31 +10:00
Andrew Tridgell 49f1e5d1db HAL_ChibiOS: removed ESC scaling, moved to AP_HAL 2023-08-24 13:06:40 +10:00
Andrew Tridgell 39153a1c01 AP_HAL_ChibiOS: removed native_millis/micros 2023-08-24 13:06:40 +10:00
Peter Barker 81326a17db hwdef: qiotek: correct HAL_BATT_MONITOR_DEFAULT define name 2023-08-23 17:20:20 +10:00
Tom Pittenger ed43f095ce AP_HAL_ChibiOS: add AP_BATTERY_ESC_TELEM_OUTBOUND_ENABLED to defaults_periph 2023-08-22 16:14:36 -07:00
Andy Piper 37a3f85a9a AP_HAL_ChibiOS: add 8 bi-directional dshot channels to KakuteH7-Wing 2023-08-22 11:08:14 +10:00
Andrew Tridgell aaec99ae31 hwdef: removed baro from HolybroG4_GPS 
not included in production versions, and baro is not generally a good
idea on a GPS due to impact of airflow

also disable unused IMU, SPI bus and 2nd I2C and re-enable 2nd CAN as
helical units have dual CAN
 2023-08-22 09:37:20 +10:00
Peter Barker efa680f1e0 AP_HAL_ChibiOS: add hwdef for bootloader for MatekL431-RC 2023-08-20 17:37:44 +10:00
Peter Barker ca549e1887 hwdef: add MatekL431-RC for RC input 2023-08-19 20:27:24 +10:00
Peter Barker 103caac92c AP_HAL_ChibiOS: add support for DroneCAN RCInput packets 2023-08-19 20:27:24 +10:00
Tom Pittenger 27f9a54a54 AP_HAL_ChibiOS: fix CubeRed default MAC Address 2023-08-17 13:51:54 +10:00
Peter Barker bb6f0ae527 AP_HAL_ChibiOS: improve gating of use of AP_InternalError library 
- gate calls into library directly on the define
 - INTERNAL_ERROR becomes empty if library not compiled in
 2023-08-17 09:16:46 +10:00
Peter Barker c2f4fb5def hwdef: use APJ_BOARD_ID mapping for ACNS-CM4Pilot 2023-08-17 09:13:54 +10:00
Peter Barker 19bd97a893 chibios_hwdef.py: permit board ID to be specified as a string 2023-08-17 09:13:54 +10:00
Peter Barker b8978ad73a hwdef: explicitly state no-bootloader-embedding on some boards 2023-08-17 08:37:31 +10:00
Peter Barker a11df25490 chibios_hwdef.py: enforce presence of bootloader if embedding desired 2023-08-17 08:37:31 +10:00
yunjiuav f92073fa4d HAL_ChibiOS: modify APJ_BOARD_ID of YJUAV_A6SE 2023-08-17 08:35:18 +10:00
Andy Piper 7896b04365 AP_HAL_ChibiOS: betafpv F450 AIO hwdef 2023-08-16 17:51:23 +10:00
Henry Wurzburg b1fc5bd69f AP_HAL_ChibiOS: add missing bootloader binaries 2023-08-16 17:49:00 +10:00
Peter Barker 7273c8416a AP_HAL_ChibiOS: prevent Periph bricking problem when paniccing early 
if Periph panics before we mark the scheduler as initialised then we don't watchdog, which we really need to do on periph nodes so they can be re-flashed conveniently.
 2023-08-16 17:21:30 +10:00
yjuav ac993753eb Modify the LED light pins and adjust the direction of the IMU and COMPASS sensors. 2023-08-15 08:35:26 +10:00
yunjiuav 5671e502d3 HAL_ChibiOS: added YJUAV_A6SE support 2023-08-15 08:35:26 +10:00
Andy Piper 75c1ad6efa AP_HAL_ChibiOS: explicitly set dshot rate when using iomcu 2023-08-15 06:53:48 +10:00
Andy Piper c6c78a9c32 AP_HAL_ChibiOS: ensure reverse and reversible masks are applied to iomcu 2023-08-15 06:53:48 +10:00
Andy Piper 52dbac1de7 AP_HAL_ChibiOS: run STM32F103 core clock at 72Mhz on 24Mhz oscillators 2023-08-15 06:53:48 +10:00
Andy Piper 33c40eaba3 AP_HAL_ChibiOS: add iomcu dshot for Pixhawk1, Pixhawk5X and fmuv5 2023-08-15 06:53:48 +10:00
Andy Piper 876f4f7a8f AP_HAL_ChibiOS: dshot iofirmware for Durandal, Pixhawk6C, CubePurple and CubeYellow 2023-08-15 06:53:48 +10:00
Andy Piper 1c646d2986 AP_HAL_ChibiOS: use f103 iofirmware for Pixhawk6X 2023-08-15 06:53:48 +10:00
Andy Piper c057cc5485 AP_HAL_ChibiOS: add get_output_mode() and use it to print correct banner for iomcu 
add support for undef of STM32 lines and DMA_NOMAP
add support for F103 running at 24Mhz
add f103 variants of iofirmware
reduce memory usage in iomcu for new model
correct pwm output reporting
split iofirmware into config + mcu to allow f103 definition
don't enable non-existant timers on F103
 2023-08-15 06:53:48 +10:00
Andy Piper 83fddd0d61 AP_HAL_ChibiOS: enable iomcu-dshot on CubeBlack 2023-08-15 06:53:48 +10:00
Andy Piper 10a612566a AP_HAL_ChibiOS: ensure shared DMA works in IOMCU 
enable TIM4 in shared mode on IOMCU for dshot
stop the PWM peripheral in rcout DMA swapping on IOMCU to prevent UART corruption
provide debugging options on iomcu dshot
support unshared DMA with iomcu dshot
optimize rcout on iomcu
tune iomcu stack for 8 channels
 2023-08-15 06:53:48 +10:00
Andy Piper 3c42f1b7d9 AP_HAL_ChibiOS: disable stack checking on iomcu 2023-08-15 06:53:48 +10:00
Andy Piper 837c81af5e AP_HAL_ChibiOS: fix sending of dshot commands to all channels 2023-08-15 06:53:48 +10:00
bugobliterator 9a21297cd1 AP_HAL_ChibiOS: add support for DShot on IOMCU 
set timer counter size to be a byte wide
use HAL_DSHOT_ENABLED instead of DISABLE_DSHOT
build iomcu-dshot from existing iomcu
correct defines for DMAR size on iomcu
allow iomcu dshot rate to be configured from FMU
correct DMA allocation for dshot on iomcu
allow debug builds on iofirmware
ensure dshot is enabled on iomcu dshot
support proper iomcu dshot output thread triggered by FMU
allow selective disablement of serial LEDs and passthrough
disable serial LEDs and passthrough on iomcu-dshot
propagate ESC telemetry to iomcu
dshot_send_groups() for iomcu
remove use of ICU on iomcu for dshot. only allocate possible DMA channels
rename serial passthrough and dshot defines
update dshot docs
resize dshot iomcu main stack to minimum
correct dshot prescaler usage and bit_width_mul calculation
use ChibiOS in tickless mode on iomcu-dshot so that virtual timers can be used
propagate dshot commands to iomcu
passthrough oneshot125 to iomcu
 2023-08-15 06:53:48 +10:00
Andy Piper f233a65580 AP_HAL_ChibiOS: add global interrupt handlers for TIM15 and TIM17 on F1 2023-08-15 06:53:48 +10:00
alexklimaj 738a4c638a hwdef: arkv6x default to no IO MCU 2023-08-14 12:06:25 +10:00
Andy Piper 205e6bebc7 AP_HAL_ChibiOS: fix incorrect removal of HAL_I2C_INTERNAL_MASK undef in SkystarsH743HD 2023-08-12 14:00:11 +10:00
Tom Pittenger 2b30fbcfb2 AP_HAL_ChibiOS: disable RPM by default on Periph 2023-08-11 13:31:45 -07:00
Peter Barker e638925ee0 AP_HAL_ChibiOS: chibios_hwdef.py: fix minor bugs 
also mark as flake8-clean
 2023-08-11 10:41:02 +10:00
Peter Barker 536f3ac922 chibios_hwdef.py: minor flake8 fixes 
whitespace, long lines, ambiguous variables etc
 2023-08-11 10:41:02 +10:00
Andy Piper f787e940b3 AP_HAL_ChibiOS: change incorrect I2C internal mask from SkystarsH7HD bdshot 2023-08-10 16:16:16 +10:00
Andy Piper 9212a24248 AP_HAL_ChibiOS: properly support CRSF on HEEWING-F405 
update HeeWing F405 README to reflect VTX pinout
 2023-08-09 17:44:14 +10:00
Peter Barker ceab0180ec AP_HAL_ChibiOS: remove use of HAL_BUILD_AP_PERIPH 
turn torqeedo off in chibios_hwdef.py instead for Periph
 2023-08-09 17:39:49 +10:00
Peter Barker 68e3b1e79b AP_HAL_ChibiOS: move rangefinder rotation default down into AP_Periph 2023-08-09 17:39:49 +10:00
Peter Barker 67988320a7 hwdef: disable sending of RELAY_STATUS on mimimized boards 2023-08-09 07:44:07 +10:00
Andy Piper fe56a6aedd AP_HAL_ChibiOS: allow 8 bdshot channels on mRoControlZeroH7 2023-08-08 11:50:56 +10:00
Peter Barker 53d5d1b9a9 AP_HAL_ChibiOS: break out include files for firmware defaults 2023-08-08 11:45:50 +10:00
Peter Barker 009172685e AP_HAL_ChibiOS: avoid use of MINIMIZE_FEATURES define in Copter directory 2023-08-08 10:35:19 +10:00
Peter Barker 646704c5dc AP_HAL_ChibiOS: remove MINIMIZE_FEATURES define 2023-08-08 10:35:19 +10:00
Michael du Breuil c1e6f130dd AP_HAL_ChibiOS: CubeOrange map EXTERN_DRDY and !EXTERN_CS to ADC 2023-08-08 09:16:56 +10:00
Peter Barker 37de51f1d4 hwdef: remove un-needed lines in KakuteH7 config 
these are the default values, and KakuteH7 isn't minimized
 2023-08-06 17:36:25 -07:00
Andrew Tridgell 0333e92cbc hwdef: update SIYI_N7 hwdef 
the N7 isn't the same as the Durandal. It has 1 CAN bus, and 2 less
UARTs, and an extra compass. This fixes the hwdef.dat to match the
schematic
 2023-08-06 09:23:45 +10:00
Tom Pittenger 8bddd4168b AP_HAL_ChibiOS: update hwdefs for eth 2023-08-06 09:20:08 +10:00
Tom Pittenger d59c3d7de0 AP_HAL_ChibiOS: remove common_eth.ld 2023-08-06 09:20:08 +10:00
Tom Pittenger 772465fef3 AP_HAL_ChibiOS: fix whitespace 2023-08-06 09:20:08 +10:00
bugobliterator f84572a545 AP_HAL_ChibiOS: remove legacy define WATCHDOG_DISABLED 2023-08-06 09:20:08 +10:00
bugobliterator cf6fd6717b AP_HAL_ChibiOS: fix alignment for Ethernet safe memory 2023-08-06 09:20:08 +10:00
Tom Pittenger 9698291920 AP_HAL_ChibiOS: fix unused var compile error 2023-08-06 09:20:08 +10:00
bugobliterator 5c657cad9a AP_HAL_ChibiOS: disable AP_Periph_Heavy for CubePilot-CANMod 2023-08-06 09:20:08 +10:00
bugobliterator 7bdee92d77 AP_HAL_ChibiOS: disable CAN2 on CubePilot-CANMod 2023-08-06 09:20:08 +10:00
bugobliterator 4e39318920 AP_HAL_ChibiOS: disable watchdog on CubePilot-CANMod 2023-08-06 09:20:08 +10:00
bugobliterator 50ae1ca7e8 AP_HAL_ChibiOS: update CubePilot-CANMod to support Networking 2023-08-06 09:20:08 +10:00
bugobliterator e6b51df7cd AP_HAL_ChibiOS: dynamically allocate memory for MAC Peripheral 2023-08-06 09:20:08 +10:00
Tom Pittenger ec65b5175b AP_HAL_ChibiOS: update Networking hwdef's param defaults 2023-08-06 09:20:08 +10:00
Tom Pittenger 291226eb5d AP_HAL_ChibiOS: hwdef add support for Networking 2023-08-06 09:20:08 +10:00
Tom Pittenger f66327d97d AP_HAL_ChibiOS: Ethernet related memory allocations 2023-08-06 09:20:08 +10:00
Tom Pittenger 3b79ff0ad3 AP_HAL_ChibiOS: add hooks to compile Networking 2023-08-06 09:20:08 +10:00
Tom Pittenger d841d250d8 AP_HAL_ChibiOS: allow HW without HW_RNG to SW-based create psuedo-random 2023-08-06 09:20:08 +10:00
Peter Barker 31281b5d11 AP_HAL_ChibiOS: eliminate use of MINIMIZE_FEATURES for Plane features 2023-08-02 17:48:25 +10:00
Andrew Tridgell 0ed33653fc HAL_ChibiOS: added a method for just changing port owner 2023-08-02 17:44:39 +10:00
Andrew Tridgell 3cde2d964b hwdef: enable custom LED reset code 2023-08-01 11:38:03 +10:00
Andrew Tridgell 865be0df64 hwdef: support for Here4 GPS 2023-08-01 11:38:03 +10:00
Peter Barker ac9fd6fcb6 AP_HAL_ChibiOS: avoid use of MINIMIZE_FEATURES in AP_LandingGear_config.h 2023-08-01 10:44:59 +10:00
Martin Luessi 459ea697d9 AP_HAL_ChibiOS: RADIX2HD target change Serial4 default protocol to ESC telemetry 2023-08-01 10:40:53 +10:00
Peter Barker 3f791ed734 hwdef: exclude landing library from SkyViper build 2023-08-01 10:07:28 +10:00
Peter Barker ab15485968 hwdef: only one GPS receiver on SkyViper 
notably that means no blending
 2023-08-01 10:03:19 +10:00
Andrew Tridgell 5908508811 hwdef: default most boards to MAVLink2 for 2nd USB endpoint 
only CubeOrange and CubeBlack left as SLCAN
 2023-07-31 19:03:13 +10:00
Andrew Tridgell 9d5560fc42 hwdef: default 2nd USB endpoint to MAVLink2 2023-07-31 19:03:13 +10:00
robin luo 0137b1f31e AP_HAL_ChibiOS/hwdef: add controller ACNS-F405AIO 
hwdef: add a new integrated flight controller ACNS-F405AIO
 2023-07-26 18:35:29 +10:00
robin luo 9d0f7f2586 AP_HAL_ChibiOS/hwdef: add controller CM4Pilot 
hwdef: add a new flight controller CM4Pilot
 2023-07-26 18:33:43 +10:00
Andrew Tridgell a602473e89 hwdef: added SIYI NY flight controller 
based on pinout of Durandal
 2023-07-24 17:25:29 +10:00
Andy Piper f93295017a Revert "AP_HAL_ChibiOS: correct voltage sensor and current scale on speedybeef4v3" 
This reverts commit 9f9be8da0f.
 2023-07-24 13:16:52 +10:00
Andy Piper 9f9be8da0f AP_HAL_ChibiOS: correct voltage sensor and current scale on speedybeef4v3 2023-07-23 12:47:14 +10:00
Peter Barker dd325a7aaf AP_HAL_ChibiOS: disable terrain unless SD card available 2023-07-19 17:25:18 +09:00
Peter Barker 338a4d6b38 hwdef: remove HAL_BOARD_LOG_DIRECTORY and HAL_BOARD_TERRAIN_DIRECTORY defaults 
these are now defaulted in chibios_hwdef.py
 2023-07-19 17:25:18 +09:00
Peter Barker 092afa54a9 AP_HAL_ChibiOS: defaults for board log directory and terrain directory in chibios_hwdef.py 2023-07-19 17:25:18 +09:00
Andy Piper 016448ca40 AP_HAL_ChibiOS: correct comment in HEEWING-F405 v1 2023-07-19 16:29:47 +09:00
Andy Piper c2820b2d87 AP_HAL_ChibiOS: HEEWING-F405v2 which includes dataflash logging 2023-07-19 16:29:47 +09:00
Peter Barker 0302672722 hwdef: remove bootloader flashing from MambaF405US-I2C and omnibusf4pro-bdshot 
also use an include where appropriate on a pair of other boards
 2023-07-18 11:40:32 +10:00
Andrew Tridgell 56be632916 HAL_ChibiOS: use set_size_best() 
maximise chance of getting a reasonable uart buffer size
 2023-07-18 11:38:27 +10:00
Henry Wurzburg f70c1e96c7 hwdef:add bdshot to MatekF765-SE 2023-07-18 10:26:44 +10:00
Andrew Tridgell aa0b119806 HAL_ChibiOS: disable CANFD bits if CANFD not enabled 
cannot support CANFD receive on G4
 2023-07-12 18:54:45 +10:00
Andrew Tridgell deab955a0f hwdef: update HolybroG4_GPS 
disable CAN2 (unused), and prevent sharing of DMA for GPS UART
 2023-07-12 18:54:45 +10:00
Peter Barker ab5908cb59 hwdef: disable bootloader flashing for F35Lightning 
both boards on our Wiki seem to show boot0 pins
 2023-07-12 17:54:02 +10:00
Andrew Tridgell a3eba8bbd3 HAL_ChibiOS: enable UART monitor 
enabled if GPS moving baseline available or the board flash size is
256k or over
 2023-07-12 17:06:02 +10:00
Andrew Tridgell 8fd5341b5b HAL_ChibiOS: moved uart locking up to AP_HAL 
and removed set_blocking_writes
 2023-07-12 17:06:02 +10:00
HelloLeFei 8ec404c6fc AP_HAL_ChibiOS: add HEEWING-F405 flight controller 
add bi-directional dshot
add back in features.
juggle DMA allocations to allow CRSF to work correctly
disable dshot on PWM 10 as it is not used
do not enable quadplane by default
do not disable arming checks
run ICM42688 at 1Mhz for low speed to avoid gyro noise
add HEEWING README and picture
 2023-07-12 10:40:37 +10:00
Andrew Tridgell 7a1b7e85be HAL_ChibiOS: default AP_BOOTLOADER_ALWAYS_ERASE to 1 on AP_Periph 2023-07-10 06:52:44 +10:00
Andrew Tridgell 0accc9f897 HAL_ChibiOS: clear EOP bit at end of F4 programming 2023-07-10 06:52:44 +10:00
Andy Piper d98666832c AP_HAL_ChibiOS: correct incorrect defaults for serial ports on FoxeerH743v1 2023-07-07 16:55:26 +10:00
yunjiuav 92a7d09e2e HAL_ChibiOS: added YJUAV_A6 support 2023-07-06 20:36:28 +10:00
Peter Barker 4ef85b14d0 hwdef: add hwdef for SDMODELH7V1 2023-07-06 17:35:44 +10:00
Mikhail Degtiarenko cc0b2ab3bb AP_HAL_ChibiOS: add SPL06 to MambaH743v4 
The Diatone Mamba MK4 H743 v2 Flight Control have moved from the DPS280 barometer to using SPL06.

https://www.diatone.us/products/mamba-mk4-h743-v2-flight-control-30mm-m3l
 2023-07-05 16:26:57 +10:00
Andrew Tridgell 0aab2f7974 HAL_ChibiOS: implement newlib alloc functions as malloc wrappers 
this fixes issue #24106
 2023-07-05 07:13:39 +10:00
Peter Barker d0b967097e AP_HAL_ChibiOS: process @include lines within hwdef files 2023-07-04 17:36:32 +10:00
Peter Barker 53e6f289e5 AP_HAL_ChibiOS: factor out a write_processed_defaults_file method 2023-07-04 17:36:32 +10:00
Peter Barker 26359204bd AP_HAL_ChibiOS: tidy defaults.parm handling 2023-07-04 17:36:32 +10:00
Andy Piper 810dfaf4f6 AP_HAL_ChibiOS: pull RTS lines low on Pixhawk6C to avoid glitches on startup 2023-07-04 11:13:26 +10:00
Peter Barker 257c684edf hwdef: update FlyingMoonF407 hwdef 
changes from vendor
 2023-07-04 10:25:19 +10:00
Peter Barker edb7a76b87 hwdef: add FlyingMoonH743 2023-07-04 10:04:55 +10:00
Martin Luessi 232fdd51da AP_HAL_ChibiOS: Added RADIX2HD 2023-07-04 09:36:10 +10:00
jfbblue0922 f990bb7374 AP_HAL_ChibiOS: jfb100 gets shorter EXT_WDOG_INTERVAL_MS 2023-06-29 19:30:14 +09:00
tiralonghipol c4b7bc9d8c AP_HAL_ChibiOS: add new board BlitzF745AIO 2023-06-28 17:23:19 +10:00
Andy Piper 539277ba2f AP_HAL_ChibiOS: Pixhawk6X bdshot version 2023-06-27 11:22:12 +10:00
Peter Barker 6e39565ce8 AP_HAL_ChibiOS: add and use AP_SCHEDULER_EXTENDED_TASKINFO_ENABLED 2023-06-27 10:43:39 +10:00
Andrew Tridgell 4219d498ec hwdef: set NRST_MODE on HolybroG4_GPS to fix reboot issue 2023-06-27 10:32:43 +10:00
Andrew Tridgell 54e2e33ee1 HAL_ChibiOS: allow hwdef to specify a NRST_MODE override 
this allows the boot behaviour of a board to be changes to avoid a
reset issue
 2023-06-27 10:32:43 +10:00
Andrew Tridgell 81e0685d33 HAL_ChibiOS: support recovery from a mutex deadlock 
if we have a bug which causes a lock order deadlock locking up the
main thread then try a force release of the mutex to allow flight to
continue without a watchdog
 2023-06-27 10:11:46 +10:00
Peter Barker 3869c4c0e9 AP_HAL_ChibiOS: add and use AP_SBUSOUTPUT_ENABLED 
.... which will allow periphs to instantiate this if they really feel like it, and for it to be removed on smaller boards on the custom build server (and potentially on lower-specced boards.
 2023-06-27 10:10:41 +10:00
Peter Barker 20e10dc401 hwdef: update FlyingMoonF427 
vendor update
 2023-06-27 09:38:48 +10:00
Andy Piper a7ad2dc940 AP_HAL_ChibiOS: use unsigned math as appropriate 2023-06-27 09:28:33 +10:00
Andy Piper 76b7566cd1 AP_HAL_ChibiOS: implement extended dshot telemetry (EDT) 2023-06-27 09:28:33 +10:00
Peter Barker 55227bc487 Tools: add and use AP_GPS_ENABLED 2023-06-21 22:28:48 +10:00
Peter Barker 3657852e30 AP_HAL_ChibiOS: add and use AP_BARO_ENABLED 2023-06-21 22:28:48 +10:00
Peter Barker b3c5889d7d AP_HAL_ChibiOS: add and use AP_COMPASS_ENABLED 2023-06-21 22:28:48 +10:00
Peter Barker e11384454f AP_HAL_ChibiOS: add and use AP_AHRS_ENABLED 2023-06-21 22:28:48 +10:00
Peter Barker 209cba7f89 AP_HAL_ChibiOS: create and use AP_BATTERY_ENABLED 
simply as a way to get HAL_PERIPH_ENABLE_BATTERY out of the main code
 2023-06-21 22:28:48 +10:00
Andrew Tridgell f138824449 HAL_ChibiOS: make clock asserts show the incorrect value 
this makes it easier to debug clock checking issues
 2023-06-20 18:56:13 +10:00
Andrew Tridgell 409d3fdc9d hwdef: removed unused lines for luminousbee5 2023-06-20 18:56:13 +10:00
Andrew Tridgell ddb991d9b5 HAL_ChibiOS: fixed 24mhz crystal on H7 with 480MHz clock 
need to adjust the PLLQ as well as the PLLN
 2023-06-20 18:56:13 +10:00
Andrew Tridgell 1055c5f1c6 waf: fixed dependency of ChibiOS build on compiler flags 
this adds a chibios_flags.h which contains the flags we pass to the
ChibiOS make, which allows us to have a make level dependency on the
flags

this fixes (among other things) the build of copter followed by
bootloader for SPRacingH7
 2023-06-20 18:08:31 +10:00
Peter Barker 916379b1b9 hwdef: remove bootloader flashing on ReaperF745 and FlywooF745 2023-06-20 15:34:19 +10:00
Peter Barker 400dd851a6 hwdef: remove fuelflow lines from ReaperF745 hwdef 
these are already removed because it's a 1M board
 2023-06-20 15:34:19 +10:00
Peter Barker 3de811ed0a hwdef: sort save_some_flash.inc (NFC) 2023-06-20 15:34:19 +10:00
Peter Barker 45e336dfcf hwdef: save_some_flash.inc on revo-mini-i2c-bdshot 2023-06-20 15:34:19 +10:00
Peter Barker c18b65a68e hwdef: no bootloader update on MambaF405v2 2023-06-20 15:34:19 +10:00
Peter Barker 5800e9d785 AP_HAL_ChibiOS: heavy periphs get servos and relays 2023-06-20 09:36:39 +10:00
Peter Barker 2932dea4ff AP_HAL_ChibiOS: add option to disable relay and servorelay libraries 2023-06-20 09:36:39 +10:00
Henry Wurzburg 15ba495f78 AP_HAL_ChibiOS: add Holybro KakuteH7-Wing 2023-06-20 09:09:12 +10:00
bugobliterator 04b7c7e4ee AP_HAL_ChibiOS: remove Chip ID as Basic ID mechanism 2023-06-17 14:49:22 +10:00
bugobliterator 6b88ed007d AP_HAL_ChibiOS: explain DID_OPTIONS config in CubeOrange-ODID/defaults.parm 2023-06-17 14:49:22 +10:00
bugobliterator 65cbd87228 AP_HAL_ChibiOS: add support for get_persistent_param_by_name 2023-06-17 14:49:22 +10:00
bugobliterator 0850ea6b61 AP_HAL_ChibiOS: add support for storing OpenDroneID in bootloader sector 2023-06-17 14:49:22 +10:00
Peter Barker 42e0d85ac9 hwdef: SkyViper doesn't have two batteries; remove code based on that 2023-06-17 11:27:46 +10:00
Andrew Tridgell 5afabf7bfb HAL_CbibiOS: get crash dump info for main thread lockups 2023-06-17 11:24:56 +10:00
Peter Barker 9a24a3f61d AP_HAL_ChibiOS: allow CrashCatcher to be disabled via hwdef 2023-06-14 18:39:11 +10:00
Peter Barker 8e0a879122 AP_HAL_ChibiOS: use minimize.inc for HAL_MSP_ENABLED and dependencies 2023-06-14 17:44:13 +10:00
jfbblue0922 f1fadbf84f AP_HAL_CHibiOS: JFB100 hwdef fix for ext watchdog 2023-06-14 17:13:10 +10:00
jfbblue0922 2f05624545 AP_HAL_ChibiOS: support external watchdog gpio 
Co-authored-by: Randy Mackay <rmackay9@yahoo.com>

optional support to toggle GPIO pin at 10hz
 2023-06-14 17:13:10 +10:00
Andrew Tridgell 514434193d hwdef: save flash on several boards with DFU 
omit bootloader on boards with DFU and low on flash
 2023-06-12 12:42:45 +10:00
Andrew Tridgell 3c0a9af505 hwdef: added no_bootloader_DFU.inc 2023-06-12 12:42:45 +10:00
Peter Barker 3aaeb0f29c AP_HAL_ChibiOS: allow AP_SCRIPTING_ENABLED to come from hwdef files 2023-06-09 16:10:52 +10:00
Peter Barker 0ec35718d7 AP_HAL_ChibiOS: use HAL_PROXIMITY_ENABLED in place of HAL_PERIPH_ENABLE_PRX 
boolean truth rather than defines, and simplifies code
 2023-06-08 11:53:01 +10:00
Andrew Tridgell 0cfd9c2ed5 HAL_ChibiOS: don't consider a MAVCAN send failure as a send failure 
this prevents duplicate sends if MAVCAN buffer is full
 2023-06-08 10:15:50 +10:00
Peter Barker 82e15536d2 AP_HAL_ChibiOS: create define specifically for the developer feature for killing IMUs 2023-06-07 18:23:01 +10:00
Martin Luessi b336526765 AP_HAL_ChibiOS: Move scheduler task table to RAM for H750 2023-06-06 19:19:10 +10:00
Martin Luessi 82280b6a8d AP_HAL_ChibiOS: Rename STM32_FORCE_CLOCK_INIT to HAL_FORCE_CLOCK_INIT 2023-06-06 19:19:10 +10:00
Martin Luessi 350dfc235e AP_HAL_ChibiOS: Add libgcc comment to H750 linker script 2023-06-06 19:19:10 +10:00
Martin Luessi f55261c852 AP_HAL_ChibiOS: Use DTCM for vector table for external flash targets 2023-06-06 19:19:10 +10:00
Martin Luessi ab03c49ea8 AP_HAL_ChibiOS: Move more time critical code to RAM for H750 2023-06-06 19:19:10 +10:00
Martin Luessi 00c8c24b1e AP_HAL_ChibiOS: increase FLASH_RAM and rename FDCAN to CAN for H750 2023-06-06 19:19:10 +10:00
Martin Luessi 0c93800ec1 AP_HAL_ChibiOS: Copy vector table to RAM if external flash is primary 2023-06-06 19:19:10 +10:00
Martin Luessi 84ccd046c6 AP_HAL_ChibiOS: Change linker script so vector table can be copied to RAM for external flash targets 2023-06-06 19:19:10 +10:00
Martin Luessi f5e6b055b6 AP_HAL_ChibiOS: Allow custom STM32_QSPISEL for H7 2023-06-06 19:19:10 +10:00
Martin Luessi 01f030da7c AP_HAL_ChibiOS: Option to force clock init 2023-06-06 19:19:10 +10:00
Andrew Tridgell 6f469c48e7 HAL_ChibiOS: support f_mkfs on all boards 2023-06-06 15:19:00 +10:00
Andy Piper 3de424e74f AP_HAL_ChibiOS: Pixhawk1-bdshot 2023-06-06 10:24:11 +10:00
Peter Barker cf24382e58 AP_HAL_ChibiOS: use minimize_features.inc for more features 2023-06-06 10:14:02 +10:00
mateksys 6187cd0350 hwdef: added MSP support in MatekL431-GPS 2023-06-06 07:30:25 +10:00
Andrew Tridgell 146cc3312c HAL_ChibiOS: implement ff_memalloc, fixing mkdir() after format 
this implements FATFS memory allocation in the HAL_ChibiOS malloc.c
which fixes mkdir() after a format of the microSD

The strategy is to deny large allocations and try for DMA allocations
if possible. This both fixes mkdir() and makes filesystem operations
faster as we have less copying of memory via the bouncebuffer
 2023-06-03 17:07:04 +10:00
Andrew Tridgell 4946ce5431 HAL_ChibiOS: revert recent USB changes 
these are causing some boards to crash on startup. Tested with a
QiotekZealotH743 which doesn't get out of setup_usb_strings()

once we have debugged this we can re-add the functionality
 2023-06-03 16:50:30 +10:00
Peter Barker 02802c88ad hwdef: minimize CRUbrain51 
get it compiling again
 2023-06-01 11:37:12 +10:00
Andy Piper de6f2ef552 AP_HAL_ChibiOS: remove bdshot from speedybeef4 as it doesn't work and increases flash usage 2023-05-31 20:45:27 +01:00
bugobliterator f7d3969116 AP_HAL_ChibiOS: enable write protection on USB msd 
also fixes support for MSD on FS
 2023-05-31 18:40:17 +10:00
bugobliterator a9ef3b031e AP_HAL_ChibiOS: add support for setting baudrate for ACM port in USB MSD 2023-05-31 18:40:17 +10:00
bugobliterator fa631c11a1 AP_HAL_ChibiOS: fix script for HerePro 2023-05-31 18:40:17 +10:00
bugobliterator a05d7ae645 AP_HAL_ChibiOS: do not init usb in sdcard_init 2023-05-31 18:40:17 +10:00
bugobliterator 5d5fdbb44d AP_HAL_ChibiOS: update HerePro hwdef and move to HereProAP 2023-05-31 18:40:17 +10:00
bugobliterator 0c5d19ff44 AP_HAL_ChibiOS: initialise SDCard before starting USB 2023-05-31 18:40:17 +10:00
bugobliterator ee45deeda8 AP_HAL_ChibiOS: silence unused functions under sdcard.cpp 2023-05-31 18:40:17 +10:00
bugobliterator c6631bce57 AP_HAL_ChibiOS: add block filesystem access support when using MSD USB 2023-05-31 18:40:17 +10:00
bugobliterator 6d6c791fdf AP_HAL_ChibiOS: add support for mass storage device 2023-05-31 18:40:17 +10:00
bugobliterator cc302d8b8c AP_HAL_ChibiOS: add support for OTG HS 2023-05-31 18:40:17 +10:00
Maxim Buzdalov c31db47bff AP_HAL_Chibios: Update hwdef for FlywooF405S-AIO (alternative IMUs) 2023-05-30 10:50:06 +10:00
Andrew Tridgell 7234ec2e52 HAL_ChibiOS: fixed USB pass-thru for 2nd USB endpoint 
we need to align the endpoint ID in the structure
 2023-05-29 08:55:38 +10:00
Davide_Lentini e808ffb22d AP_HAL_ChibiOS: Update luminousbee5 hwdefs, Add new bootloaders 
This modification allows to have imu 42605 and 42688 defined in the same hwdef

Tools: luminousbee5 add new bootloaders

AP_HAL_ChibiOS: luminousbee5 , change PC7 from FLOAT to PULLDOWN

AP_HAL_ChibiOS: luminousbee5 , change version 5.32/5.4

Tools: Update luminousbee5 hwdefs, Add new bootloaders

AP_HAL_ChibiOS: luminousbee5 hwdefs Rev 2 , luminousbee5 default.parm

Tools: Update luminousbee5 hwdefs, Add new bootloaders

This modification allows to have imu 42605 and 42688 defined in the same hwdef

Tools: luminousbee5 add new bootloaders

AP_HAL_ChibiOS: luminousbee5 , change PC7 from FLOAT to PULLDOWN

AP_HAL_ChibiOS: luminousbee5 , change version 5.32/5.4

Tools: Update luminousbee5 hwdefs, Add new bootloaders

AP_HAL_ChibiOS: luminousbee5 hwdefs Rev 2 , luminousbee5 default.parm

AP_HAL_ChibiOS: Removed BETA in comment
 2023-05-26 10:52:22 -07:00
Peter Barker 4bcd4decb1 AP_HAL_ChibiOS: add and use AP_RCPROTOCOL_ENABLE_SET_RC_PROTOCOLS 2023-05-26 14:26:27 +10:00
bugobliterator 160629eb18 AP_HAL_ChibiOS: add links to detailed documentation at docs.cubepilot.org 2023-05-24 18:15:16 +10:00
bugobliterator faca23fe74 AP_HAL_ChibiOS: update CubeOrange pinout image 2023-05-24 18:15:16 +10:00
Andrew Tridgell 7a2e2f4927 hwdef: update CubeBlack/Orange/OrangePlus pinouts 
the motivation for this was to add the SWD pinouts, but I took the
opportunity to get the orange and orangeplus information more up to
date as well
 2023-05-24 18:15:16 +10:00
bugobliterator b5617a9ff8 Revert "AP_HAL_ChibiOS: disable watchdog in hwdef.h not in-line in code" 
This reverts commit ccfad8ceea.
 2023-05-23 09:00:11 +10:00
AerofoxTech 91f3e3a9a7 hwdef: add Aerofox GNSS F9P module 2023-05-20 08:57:25 +10:00
Andy Piper d7bcfd757b AP_HAL_ChibiOS: correct locking on LED thread 2023-05-18 07:53:33 +10:00
Peter Barker 0c7a16b03d AP_HAL_ChibiOS: use chibios_hwdef to define NOTIFY_LED_OVERRIDE_DEFAULT 2023-05-18 07:53:22 +10:00
Peter Barker 586851e40f hwdef: create and use convenient is_periph_firmware method 2023-05-17 18:39:51 +10:00
Peter Barker 30131a2f36 AP_HAL_ChibiOS: replace HAVE_FILESYSTEM_SUPPORT with backend defines 2023-05-17 09:40:39 +10:00
Peter Barker 6aeeb3d51d AP_HAL_ChibiOS: consolidate AP_Periph serialmanager defaults 2023-05-16 10:16:10 +10:00
Peter Barker 537fc19bb5 AP_HAL_ChibiOS: do not build ChibiOS with debug symbols unless debug build 
debug symbols subtly change the compiler output which can lead to problems with repeatable builds
 2023-05-16 09:55:47 +10:00
Peter Barker 2d7123fcff AP_HAL_ChibiOS: add and use AP_RCPROTOCOL_ENABLED 2023-05-16 09:16:37 +10:00
bugobliterator 75ef9a27cb AP_HAL_ChibiOS: fix battery monitor params for CubeRed 2023-05-15 07:14:57 +10:00
Andrew Tridgell 7e84028a91 HAL_ChibiOS: fixed sdcard lockup with SPI sdcard 
this affects boards that share sdcard on the same bus as another SPI
device. In this case it was a QiotekZealotH743 where logging stopped

this issue is that the SPI hooks for MMC SPI did not do a DMA channel
lock before the SPI device lock. So when the RAMTRON driver on the
QiotekZealotH743 which is on the same SPI2 bus as the sdcard did an
operation we had a lock order violation
 2023-05-13 18:18:14 +10:00
Henry Wurzburg d0ac8f3016 AP_HAL_ChibiOS: normalize SerialManagers ports defaults to allow inclusion in hwdefs 2023-05-11 18:45:53 +10:00
Andrew Tridgell b019978e22 hwdef: use zero address for INA2XX to allow for different sensors 2023-05-10 18:15:52 +10:00
Randy Mackay d6eb11d27e AP_HAL_ChibiOS: JFB100 LED definition fix 2023-05-10 17:24:02 +10:00
Randy Mackay 9c44d79241 AP_HAL_ChibiOS: JFB100 board def fixup 2023-05-10 17:24:02 +10:00
jfbblue0922 79f5cdaf04 AP_HAL_ChibiOS: add JFB100 board definition 2023-05-10 17:24:02 +10:00
Peter Barker db6deee9e1 hwdef: chibios_hwdef.py becomes a library 2023-05-10 17:14:43 +10:00
Andy Piper 99e6958e36 AP_HAL_ChibiOS: FoxeerH743 GA release 2023-05-10 17:07:45 +10:00
Peter Barker 871797d436 hwdef: correct double-definitions of DEFAULT_NTF_LED_TYPES 
these hwdefs include other hwdefs which define the samething.

Remove where identical to file beingincluded, undef otherwise
 2023-05-07 20:13:44 +10:00
Peter Barker 85012b003e hwdef: correct compilation for KakuteF4Mini 
we include KakuteF4 which also sets this define, so you end up with a redefinition error
 2023-05-06 21:59:58 +10:00
Andrew Tridgell ce703cbed7 HAL_ChibiOS: fixed asserts in AnalogIn driver 
when building with --enable-asserts on boards with ADC1 and ADC3
(eg. Holybro H7 based boards) we were triggering asserts on bad ADC
index. In order to preserve the asserts (which are good for catching
errors) we need to ifdef the relevant calls
 2023-05-06 07:24:58 +10:00
Henry Wurzburg fc42f8f9be AP_HAL_ChibiOS: move NTF_LED_TYPES from defaults to hwdef 2023-05-04 07:45:12 +10:00
Henry Wurzburg 8293c1f8c9 AP_HAL_ChibiOS: change BUILD_DEFAULT_LED_TYPE to new pattern 2023-05-04 07:45:12 +10:00
Peter Barker 43f9f08b8f AP_HAL_ChibiOS: define accepted RC backends for IOMCU in its hwdef files 2023-05-03 19:06:33 +10:00
Peter Barker a4ee729035 hwdef: airbotf4: minimize this board 
not currently building.

The FLASH_RESERVE_START_KB at 64 means we're short on space on this board
 2023-05-03 18:35:26 +10:00
Andy Piper 95437d248f AP_HAL_ChibiOS: advanced timers are now determined automatically on L4+ 2023-05-03 07:39:39 +10:00
Henry Wurzburg e5336a8e9e AP_HAL_ChibiOS:correct KakauteH7 IMU label 2023-05-02 10:02:35 +10:00
Andy Piper d69b8c2693 AP_HAL_ChibiOS: fix usage of ADC2 and ADC3 in STM32H730 2023-04-28 08:31:15 +10:00
Andy Piper e6c1897dd3 AP_HAL_ChibiOS: provide complete ADC2/ADC3 maps for STM32H750 and STM32H743 
Fix dummy pin generation
 2023-04-28 08:31:15 +10:00
Andy Piper 26c59349d5 AP_HAL_ChibiOS: use HAL_XIP_ENABLED to denote running in external flash 2023-04-28 08:31:15 +10:00
Andy Piper ff1661a8de AP_HAL_ChibiOS: use STM32_FLASH_NBANKS for flash actions 2023-04-28 08:31:15 +10:00
Andy Piper 5b43926d0a AP_HAL_ChibiOS: for H730/H750 running in XIP mode do not reset clocks 
create mcuconf file for STM32H730 (type2)
allow OTG2 to be used as OTG1 on MCUs that need it
remove redundant OTG enablement
 2023-04-28 08:31:15 +10:00
Andy Piper b75ff2e2ae AP_HAL_ChibiOS: allow only ADC2 to be used 2023-04-28 08:31:15 +10:00
Andy Piper 798fc05ba8 AP_HAL_ChibiOS: clean up linker map on H730 and H750 
use regular ChibiOS RAM areas for RAM functions
exclude board.o from RAM functions and add some comments
use separate linker script for H750
use correct RAM area for process stack on H750/H743
update EXCLUDE items to put __early_init in flash on H730 and H750
optimize H730 ramfunc usage
 2023-04-28 08:31:15 +10:00
Andy Piper 8b8f5eadd6 AP_HAL_ChibiOS: detect QSPI and OSPI separately for setting NO_RESET 2023-04-28 08:31:15 +10:00
Andy Piper fee853dc7d AP_HAL_ChibiOS: correct OSPI clock in WSPIDevice 2023-04-28 08:31:15 +10:00
Andy Piper 7516f04106 AP_HAL_ChibiOS: create two configurable non-cacheable memory areas for DMA 2023-04-28 08:31:15 +10:00
Andy Piper 1607e66977 AP_HAL_ChibiOS: prototype CubeMX configuration for H730 2023-04-28 08:31:15 +10:00
Andy Piper 93e1859ba6 AP_HAL_ChibiOS: support is_busy() on WSPI device 2023-04-28 08:31:15 +10:00
Andy Piper 8ef92805e1 AP_HAL_ChibiOS: support for OCTOSPI 2023-04-28 08:31:15 +10:00
Andy Piper c4d30879d2 AP_HAL_ChibiOS: hwdef for SPRacing H7RF 2023-04-28 08:31:15 +10:00
Andy Piper 61e70a5fb1 AP_HAL_ChibiOS: add support in hwdef for OCTOSPI 2023-04-28 08:31:15 +10:00
Andy Piper f8dd6a1b2a AP_HAL_ChibiOS: rename QSPIDevice to WSPIDevice 2023-04-28 08:31:15 +10:00
Andy Piper cc086ab8d4 AP_HAL_ChibiOS: support for STM32H730xx MCUs 
correct calculation of advanced timers
add support for linker script configuration in mcu config script
use linker script configuration for H750 and H730
add single OTG_HS support on H730 via OTG2
make sure complimentary channels get advanced timers
complemntary timers do not require advanced mode
allow custom clockspeeds of 550Mhz
correct debug pins on H730
support custom clockrate of 520Mhz on H730
correct H730 USB end point pins
restructure linker script for STM32H730
allow chibios_hwdef.py to set advanced timer on L431
don't define RAMFUNC on STM32H730
clock tree for STM32H730
create non-cacheable memory area for SDMMC DMA
don't look for RAM_MAP in bootloader with external flash
 2023-04-28 08:31:15 +10:00
Peter Barker 1f3aecf41b AP_HAL_ChibiOS: use defaults to turn off CRSF telem on IO firmware 2023-04-27 18:31:30 +10:00
Peter Barker 926c7d64b1 AP_HAL_ChibiOS: add and use AP_BOOTLOADER_FLASHING_ENABLED 2023-04-26 22:55:36 +10:00
bugobliterator ac8a447bbf AP_HAL_ChibiOS: add asserts to AnalogIn 2023-04-26 18:04:00 +10:00
bugobliterator 240556acc5 AP_HAL_ChibiOS: ignore the settings for ANALOG_INPUT_NONE 2023-04-26 18:04:00 +10:00
bugobliterator 09c6500ac7 bootloaders: add CubeRed bootloaders 2023-04-26 18:04:00 +10:00
bugobliterator 91c0bda4da AP_HAL_ChibiOS: add hwdef for CubeRedSecondary 2023-04-26 18:04:00 +10:00
bugobliterator 9e6c9022a3 AP_HAL_ChibiOS: add support for forwarding USB COM2 to Secondary controller 2023-04-26 18:04:00 +10:00
bugobliterator 2ac7dcc764 AP_HAL_ChibiOS: use HAL_SERIAL0_BAUD_DEFAULT when setting up serial(0) 2023-04-26 18:04:00 +10:00
bugobliterator 918a7355c5 AP_HAL_ChibiOS: add CubeRedPrimary hwdef 2023-04-26 18:04:00 +10:00
bugobliterator 0343b789e6 AP_HAL_ChibiOS: add support for mixed internal and external flash 2023-04-26 18:04:00 +10:00