Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
47,960 Commits 71 Branches 509 Tags 714 MiB
Commit Graph

6746 Commits

Author SHA1 Message Date
Jason Short 71d57a5371 Enabled PWM test 2012-02-09 22:22:01 -08:00
Jason Short b315e23bbd Found missing Break in Switch statement. 2012-02-09 22:22:01 -08:00
Jason Short 2335b74bc3 faster FS timer 2012-02-09 22:22:00 -08:00
Jason Short c35ad2d493 Loiter update - removed compensation curve. Did some more math and its's not worth the effort, harder to tune. 2012-02-09 22:22:00 -08:00
Jason Short 6848dc17e5 Added safety to prevent shutdown of motors during Auto-land 2012-02-09 22:22:00 -08:00
Jason Short f40d40b0f9 Acro fix - we had lost the scaling of Acro mode in 2.1. This restores that. 2012-02-09 22:22:00 -08:00
Randy Mackay fe7a0a97ab ArduCopter - CH7 - changed default to CH7_DO_NOTHING 2012-02-09 20:26:01 +09:00
levinemax 345a23273e Motor mix update for X8 (octo quad), 
diagrams:
http://wiki.ardupilot-mega.googlecode.com/git/images/APM1/ACM-X8_APM14.jpg
http://wiki.ardupilot-mega.googlecode.com/git/images/APM2/FRAMES_X8.jpg
 2012-02-09 03:57:40 +00:00
Randy Mackay 3517964e14 ArduCopter - Camera.pde - turn off camera pitch control (which uses channel 6) when channel 6 is being used for tuning. 2012-02-08 23:51:53 +09:00
Randy Mackay 70f91e3cc3 Arducopter - reduced rate of decent when landing using sonar 2012-02-08 22:46:32 +09:00
Randy Mackay f1a129c8ea ArduCopter - Log.pde - fixed Log_Read_Control_Tuning so that it doesn't read too many bytes. Also fixed up some comments 2012-02-05 16:56:51 +09:00
Randy Mackay 498970a948 TradHeli - tiny fix for yaw_offset. Yaw_offset is used to proactively counteract rotational force caused by changing the collective pitch (i.e. rapidly climbing or decending). There was a small bug for when the collective pitch is negative (i.e. powered decent) in which case the offset was in the incorrect direction. 2012-02-05 11:04:38 +09:00
Andrew Tridgell 1a861b3de5 allow for lower serial baud rates 
not many people will use less than 9600 baud, except for those wanting
to test extreme range radios, which is what I'm trying to do :-)
 2012-02-04 19:07:18 +11:00
Jason Short ef9418c2de fix issue with low throttle in air 2012-02-03 13:29:59 +00:00
Michael Oborne 151479f769 fix issue 502 
to identify quad over mavlink
 2012-02-03 06:53:08 +08:00
Pat Hickey dad4ee92e5 Revert all changes to ArduCopter Motors MOT mappings. 
Revert "Arducopter Motors Octa: Change V frame MOT_ output ordering."

This reverts commit bdab02f408ddc5451fcb4c6390b2475d31ac657f.

Revert "hexa frame FRAME_CONFIG fixup"

This reverts commit d15e692df613cb728ec671a54dce166f6f1940a0.

Revert "Arducopter Motors Octa: revert OCTA_V_FRAME back to part of OCTA_FRAME"

This reverts commit cb0a8c62fbd07a8ae9dcb8d4fffce337ace1aa1c.

Revert "Arducopter Motors Hexa: Change ordering of MOT designations in Plus frame"

This reverts commit 120d7f9050d5ec9f8fbe02c0ed4f38621949f4ee.

Revert "Arducopter Motors Hexa: Revert HEXA_PLUS_ and HEXA_X_ to single HEXA_FRAME"

This reverts commit 7d65ec311fd2e1222a36d0b34c366e21f3869fcc.

Revert "Arducopter Frames: revert to old HEXA_FRAME and OCTA_FRAME defines."

This reverts commit 47c6e8662f4d5e8fb920f2049338541343d8d18e.

Revert "Add Max's changes for new MOT mappings. Defines new FRAME_CONFIG types."

This reverts commit 8259c90ec7cb29dedac19890cd9a4449b7399e36.
 2012-02-01 10:14:46 -08:00
analoguedevices 3288b518c0 credits 2012-02-01 04:44:36 +00:00
analoguedevices 6dbcac855a Incremented version number to 2.3 2012-02-01 04:39:15 +00:00
Pat Hickey 36389cdbd8 ArduCopter Octa: fix yaw motors for Octa V. 
* I based this off the APM1 Octa V diagram at
  http://code.google.com/p/arducopter/wiki/AC2_Multi
 2012-01-31 19:37:49 -08:00
Pat Hickey 6a333b743a Arducopter Motors Octa: Change V frame MOT_ output ordering. 
* I backed this out from Max's changes, but I'm not sure whether its correct.
 2012-01-31 18:19:41 -08:00
Pat Hickey 7ca81bd2c9 hexa frame FRAME_CONFIG fixup 2012-01-31 18:19:41 -08:00
Pat Hickey a24f89fb6d Arducopter Motors Octa: revert OCTA_V_FRAME back to part of OCTA_FRAME 2012-01-31 18:19:41 -08:00
Pat Hickey 0735c2b62f Arducopter Motors Hexa: Change ordering of MOT designations in Plus frame 
* This will change the output order for APM2, but not APM1.
 2012-01-31 18:18:13 -08:00
Pat Hickey dbd1cc6a9f Arducopter Motors Hexa: Revert HEXA_PLUS_ and HEXA_X_ to single HEXA_FRAME 2012-01-31 18:18:13 -08:00
Pat Hickey b245265669 Arducopter Frames: revert to old HEXA_FRAME and OCTA_FRAME defines. 
* HEXA_X_FRAME and HEXA_PLUS_FRAME merged back into HEXA_FRAME
* OCTA_V_FRAME merged back into OCTA_FRAME
 2012-01-31 18:18:13 -08:00
Pat Hickey 0e9294538b Add Max's changes for new MOT mappings. Defines new FRAME_CONFIG types. 
* HEXA_FRAME has been eliminated and changed to HEXA_X_FRAME and
  HEXA_PLUS_FRAME
* OCTA_FRAME stays the same name for X and +, but the V frame
  configuration requires new OCTA_V_FRAME name.
 2012-01-31 18:18:13 -08:00
Randy Mackay b851d39eaa OptFlow - reenable OF_LOITER pid controller and reduce I term 2012-02-01 08:04:18 +09:00
Jason Short 21bd48b6c3 Loiter PIDs 2012-01-30 21:13:03 -08:00
Jason Short 8aaf88e13b tweaks to Loiter 2012-01-30 21:13:03 -08:00
Jason Short 90099d4a42 ATT tuning update 2012-01-30 21:13:03 -08:00
Jason Short f225efef9f tuning 2012-01-30 21:13:03 -08:00
Jason Short 08a9249e2b cosmetic 2012-01-30 21:13:03 -08:00
Jason Short 5934b503b8 tuning fixes 2012-01-30 21:13:03 -08:00
Jason Short 31614c39dd Cosmetic 2012-01-30 21:13:03 -08:00
Jani Hirvinen 009e87105f Minor changes for PID for jDrones motors due latest changes on control laws. 2012-01-31 09:00:31 +07:00
Jason Short 23709bafef pid_nav_lat incorrectly labeled 2012-01-29 23:02:00 -08:00
Jason Short a3862ced62 cosmetic 2012-01-29 21:55:17 -08:00
Jason Short 46e08fb46a Added more attributions 2012-01-29 21:53:44 -08:00
Jason Short ae65a0f03f removed filter. Don't need it. 2012-01-29 17:10:52 -08:00
Jason Short bf2cc6072d limiting alt hold rate error to 1m/s 2012-01-29 17:08:34 -08:00
Jason Short 02aacc454b Lowering the throttle_P values by default 2012-01-29 16:27:13 -08:00
Jason Short 650c0ed3f1 made Loiter over ride exit dependent not on speed, but centered sticks. 2012-01-29 16:15:02 -08:00
Randy Mackay 693a2cfdcd TradHeli - fix to servo limits. They had been unnecessarily limited to the collective pitch's min and max but actually there are cases (for example when the swash is leaning over 45degrees) where one servo goes well beyond the collective pitch's min or max. 2012-01-29 21:14:37 +09:00
Randy Mackay 974c825f4a Optflow - minor fix to D term defaulting 2012-01-29 21:06:41 +09:00
Jason Short 67cd412105 Landing update for better baro landing 2012-01-28 22:35:57 -08:00
Jason Short 5ab37a346c reduce test.pde size for 1280 users 2012-01-28 22:16:24 -08:00
Jason Short 7833cea9d4 2.2B6 - Please verify Heli still functions properly. 
Added AC_PID lib
Updated landing code
bug fixes
 2012-01-28 22:00:05 -08:00
Jason Short 295631139a formatting 2012-01-28 21:19:46 -08:00
Jason Short d1fcebb5ca Cosmetic changes 
GPS LED lock waits for home_is_set to be true
 2012-01-28 21:19:46 -08:00
Jason Short 326a663c6b changed tuning range 2012-01-28 21:18:43 -08:00
Randy Mackay f3a95ff3cb Arducopter - Tri - move yaw servo (channel7/motor7/CH_TRI_YAW) to mid point on startup 2012-01-28 10:13:58 +09:00
Randy Mackay 122623f64b OpticalFlow - added OF_LOITER flightmode 2012-01-28 09:27:16 +09:00
Pat Hickey 1dcd50e3be ArduCopter Tri: fix for enable_out of yaw servo, defined yaw servo for APM2 2012-01-27 07:39:01 -08:00
Randy Mackay 8dee001657 Sonar - changed default pin to A0 2012-01-26 22:50:48 +09:00
Pat Hickey 6c03307217 ArduCopter Heli: add motors_output_enable function 2012-01-25 22:41:09 -08:00
Randy Mackay 2c906b7b27 OpticalFlow - replaced PI controller with PID controller. 
Modified optical flow hold to use aggregated position instead of speed.
 2012-01-25 21:55:14 +09:00
Randy Mackay 4434ddf389 Optical flow - updated standard frame rate to 2000hz and increased resolution to 1600cpi 2012-01-25 21:53:20 +09:00
Jason Short 25529dec69 added loiter_d to allow users to configure alternate Loiter alg 2012-01-22 14:19:27 -08:00
Jason Short 74daadb252 Revert "test to switch loiter controls" 
This reverts commit 92270371d038f246d535f0ace9fc19272c44291d.
 2012-01-22 14:19:27 -08:00
Jason Short 6476ba22f2 test to switch loiter controls 2012-01-22 12:28:34 -08:00
Pat Hickey 89e11afc09 ArduCopter: Call APM_RC.enable_out for camera channels in init_camera() 2012-01-22 12:03:11 -08:00
Pat Hickey 98a90d0352 ArduCopter: Call motors_output_enable at correct spot during init 2012-01-22 12:03:11 -08:00
Pat Hickey 04a3112f33 ArduCopter: Add implementation of motors_output_enable to each motors_ frame type 2012-01-22 12:03:11 -08:00
Jason Short dd1e08a7e0 Causes Aero_SIM to fail 2012-01-22 09:34:43 -08:00
Jason Short 1d9783652a added Beta 4 tag 2012-01-21 22:15:23 -08:00
Jason Short 60e3508f7c converted to cm 
Signed-off-by: Jason Short <jasonshort@mac.com>
 2012-01-21 22:14:08 -08:00
Jason Short aace39e65c Converted distance gains to CM 
added loiter_d for rate control, equal to old Nav_P gain
 2012-01-21 22:13:57 -08:00
Jason Short fffa1af3b3 Fixed speed governor which was letting speed get to 0. 
added Loiter_d to replace Nav_P for rate control
wp_distance calc now returns CM
 2012-01-21 22:12:57 -08:00
Jason Short f638a4b81d recording nav_bearing rather than target bearing 
recording x and y speed rather than Iterms for nav since they are always 0 now
 2012-01-21 22:10:28 -08:00
Jason Short 2fa24e0557 added conversions of CM to M 2012-01-21 22:09:39 -08:00
Jason Short 7edd16e5fe Added Loiter_D to replace Nav_P for better separation of loiter and navigation tuning. 
Upped Nav_P defaults to 3 based on windy flight testing
Added minimum WP speed define of 1m/s
Upped loiter_I for better wind performance - was not seeing any overshoot in logs
Made Nav_I default of 0, since we are not using it in the code.
 2012-01-21 22:09:13 -08:00
Jason Short 59d1f225d5 convert command into CM from M 
Making Landing boost be one at minimum to trigger better navthrottle output
 2012-01-21 22:06:35 -08:00
Jason Short f3cc1121aa better default for speed governer 2012-01-21 22:05:48 -08:00
Jason Short 5cc19bbe7c slightly less filtering for less latency 2012-01-21 22:04:54 -08:00
Jason Short 9003b95499 Converted to cm for distance 2012-01-21 22:04:35 -08:00
Jason Short 8cb645f3c2 increasing the velocity near WP 2012-01-21 11:59:49 -08:00
Jason Short 1aa6d0ea08 limiting the pitch throttle compensation 2012-01-21 11:59:49 -08:00
Jason Short ab5716c42d Calc error for logs 2012-01-21 11:59:49 -08:00
Jason Short 7c25253422 Enabled auto throttle hold 2012-01-20 22:52:31 -08:00
Jason Short 7fb641ab77 added note 2012-01-20 22:52:31 -08:00
Jason Short fb72ecd4e4 formatting 2012-01-20 22:52:31 -08:00
Jason Short 127544b833 Added cast for comparison 2012-01-20 22:52:30 -08:00
Jason Short 42b1362bba cleanup 2012-01-20 22:52:30 -08:00
Jason Short 5ac26a5500 error on comparison operator 2012-01-20 22:52:30 -08:00
Jason Short 5180592913 Added Auto_land_timeout to params 2012-01-20 22:52:30 -08:00
Jason Short c190f83bb0 AutoLanding timeout for Mission Planner 2012-01-20 22:52:30 -08:00
Jason Short a22596fb33 Max throttle output was to high 2012-01-20 22:52:30 -08:00
Jason Short 19053bb725 Updated Firmware version 2012-01-20 22:52:30 -08:00
Jason Short f5fd3a0597 reset all I terms at Arming 2012-01-20 22:52:30 -08:00
Jason Short 287ffb5fb4 enabled Mavlink Land command 2012-01-20 22:52:30 -08:00
Jason Short 6784989e83 relocated reset_I term functions to central location 2012-01-20 22:52:30 -08:00
Jason Short d2c78d2b75 Stab_D changes units with the new dampening controller updates 
Stabilize roll is raised to .1 - Flies great, and avoids a slow oscillation that could be affecting loiter.
Loiter P lowered to 1.5 based on feedback
 2012-01-20 22:52:30 -08:00
Jason Short 932869b686 renamed function 2012-01-20 22:52:30 -08:00
Jason Short 43365fe802 Verify land updates from JLN 
Effectively a throttle control for landing that mimics a person lowering the throttle.
 2012-01-20 22:52:29 -08:00
Jason Short ed32ad30fd Refined the D term for stabilize 
moved all the rest_I terms from code into 1 central place
 2012-01-20 22:52:29 -08:00
Jason Short 5141534ea9 B3 2012-01-20 22:52:29 -08:00
Jason Short db6db1ab91 set dampening range from 0 - .08 from 0 to .6. The new dampening code has changed units. 
added the ability to force nav_throttle so we  don't get ground effects screwing up baro sensor.
Added more descriptive Rest_I functions
 2012-01-20 22:52:29 -08:00
Jason Short 6e94b21d67 Altitude no longer resets when moving loiter WP 2012-01-20 22:52:29 -08:00
Jason Short 85f10589b2 slowed down slightly 2012-01-20 22:52:29 -08:00
Jason Short 017364fc5b Lowered range to more sensible values 2012-01-20 22:52:29 -08:00
Jason Short 2831ff9148 Off by default 2012-01-20 22:52:29 -08:00
Michael Oborne 3142a75913 AC fix attitude level hil 2012-01-21 07:52:52 +08:00
Michael Oborne 95f58b0432 fix scale error 2012-01-21 06:33:18 +08:00
Michael Oborne 1bebb9452b AC sync battery code with arduplane 2012-01-21 06:29:09 +08:00
Michael Oborne 52a9bb3cd1 fix SITL attitude hil AC 2012-01-20 16:32:25 +08:00
Doug Weibel ed9f7cb1b6 Update battery monitoring code for ArduCopter 
Fixes compatibility for APM2.  Also a significant update to the battery monitoring code:  We previously had monitoring modes for individual cell voltages for 3 and 4 cell lipos.  These have been removed as they were never really supported (the cell voltages were computed but were not reported or recorded anywhere).  Also, some clean-up/prep work was done for supporting monitoring 2 separate battery packs.  The CLI battery and current monitoring tests were consolidated into 1 test.
changed
 2012-01-15 17:10:02 -07:00
Doug Weibel 0306bf97a0 Just a little more commenting work on global variables 2012-01-15 16:11:02 -07:00
Jason Short e2c2a453a8 APM2 Channel assignments 2012-01-15 10:24:16 -08:00
Jason Short 3ebed0b278 This allows users to test the Auto_throttle hold or cruise value 2012-01-14 11:43:52 -08:00
Jason Short 46ef246e67 b2 2012-01-14 11:37:00 -08:00
Jason Short 0ae82da0fd Fix for SIMPLE mode 2012-01-14 11:32:48 -08:00
Jason Short 72faa6525e Tweak to make circle mode scripting more accurate 2012-01-14 11:21:50 -08:00
Jason Short 89343ae306 adjusted GPS watch dog not to be so aggressive, 
removed unneeded flag clearing
 2012-01-14 11:20:40 -08:00
Jason Short 95ac9d163e lowered Loiter I, commented out unused var 2012-01-14 11:20:40 -08:00
Jason Short c02b403a06 temp removed alt D term until more testing 2012-01-14 11:20:40 -08:00
Jason Short 1843798697 Clarified the Increment for WP total 2012-01-14 11:20:40 -08:00
Jason Short f97d58c753 added notes, removed redundant save wp_total 2012-01-14 11:20:40 -08:00
Jason Short 7877a872d3 added update throttle cruise function 2012-01-13 16:48:05 -08:00
Jason Short 1269b07d9a Made RTL always the current Altitude 2012-01-13 16:47:38 -08:00
Jason Short ec9880f725 made resetting throttle cruise a function 2012-01-13 16:47:08 -08:00
Jason Short 6591089110 Disabled Ryans filter until we get real-world testing in. 2012-01-13 12:48:02 -08:00
Jason Short 8d909f6eed fixed GPS bug - moved to fast loop location 2012-01-13 12:47:22 -08:00
Jason Short c327a9f000 made landing shoot for below home by 2 meters to avoid bounce up. 2012-01-13 12:46:40 -08:00
Jason Short 7c475f178c tuned down Alt hold D gain 2012-01-13 09:36:51 -08:00
Jason Short 4eacc6f3eb re-enabled relay test 2012-01-13 08:55:02 -08:00
Jason Short ee7c948781 Added simple constrain for Alt d term 2012-01-13 08:49:55 -08:00
Jason Short b0810e054e moved GPS routines to 50hz loop to avoid delay. 2012-01-12 22:59:47 -08:00
Jason Short 648a404ee1 Version 2.2 2012-01-12 22:37:33 -08:00
Jason Short 91e05834c8 removed wind comp code, 
Added Landing boost code
 2012-01-12 22:28:58 -08:00
Jason Short 4459fc4e34 Added a small D term on alt hold 2012-01-12 22:28:58 -08:00
Jason Short 6b85adb460 Added Landing throttle control to force down the copter 2012-01-12 22:28:58 -08:00
Jason Short 154411c96c removed unused defines 
lowered default Loiter gain
 2012-01-12 22:28:58 -08:00
Jason Short 569ff5046f Added Ryan's GPS lag filter 
Removed unused code
refined alt change
 2012-01-12 22:28:58 -08:00
Jason Short a59c9ae22c added notes 2012-01-12 22:28:58 -08:00
Doug Weibel 9846822748 Bug fix for compass. 
This is a fix for an interesting bug when a DCM matrix reset was added to the ground start.  This bug only showed up if (A) a ground start were performed after an air start or due to use of the "Calibrate Gryo" action, (B) if the current orientation were sufficiently different from 0/0/0, and (C.) if the particular magnetometer had sufficiently large offsets.  Why did resetting the DCM matrix to 0/0/0 pitch/roll/yaw at ground start cause a bug?  The magnetometer offset nulling determines the proper offsets for the magnetometer by comparing the observed change in the magnetic field vector with the expected change due to rotation as calculated from the rotation in the DCM matrix.  This comparison is made at 10Hz, and then filtered with a weight based on the amount of rotation to estimate the offsets. Normally it would take considerable time at normal in-flight rotation rates for the offset estimate to converge. 

If a DCM matrix reset occurs when the offset nulling algorithm is up and running, the algorithm sees the DCM reset as a instantaneous rotation, however the magnetic field vector did not change at all.  Under certain conditions the algorithm would interpret this as indicating that the offset(s) should be very large.  Since the "rotation" could also have been large the filter weighting would be large and it was possible for a large erroneous estimate of the offset(s) to be made based on this single (bad) data point.

To fix this bug methods were added to the compass object to start and stop the offset nulling algorithm.  Further, when the algorithm is started, it is set up to get fresh samples.  The DCM matrix reset method now calls these new methods to stop the offset nulling before resetting the matrix, and resume after the matrix has been reset.
 2012-01-12 14:44:24 -07:00
analoguedevices 70b7951366 Eliminated second instance of APM2 #defines 2012-01-12 20:38:41 +00:00
Jason Short a7bce15365 R10 2012-01-11 22:41:51 -08:00
Jason Short 99ea69ef7b New Loiter control 2012-01-11 22:41:51 -08:00
Jason Short 257890d5be New Loiter Gains for new Loiter methods 2012-01-11 22:41:51 -08:00
Jason Short 98f637282b moved to verify_land 2012-01-11 22:41:51 -08:00
Jason Short 5e9db462f5 attempting to force down without using Manual boost. 2012-01-11 22:41:51 -08:00
Jason Short f35411ac45 R9 2012-01-10 23:46:08 -08:00
Jason Short 84e001594d comma 2012-01-10 23:45:33 -08:00
Jason Short 4b54887c6c Switched to set_next_WP for mode switches 2012-01-10 23:43:44 -08:00
Jason Short 6b836d1a09 Fixed Type Error 2012-01-10 23:43:44 -08:00
Jason Short c4476bdd80 Fixed type error 2012-01-10 23:43:44 -08:00
Jason Short 3e8ff39d4b Climb rate control 2012-01-10 23:43:44 -08:00
Jason Short a79d302b98 added set_new_altitude call() 2012-01-10 23:43:44 -08:00
Jason Short e102cb9e6a Added ending for auto landing 2012-01-10 23:42:27 -08:00
Jason Short 3a5ffc252d updated climb rate control 
Land detector
 2012-01-10 23:42:27 -08:00
Jason Short acd877abda added set_new_altitude call 2012-01-10 23:42:27 -08:00
Jason Short f36aba8af2 climb rate control 2012-01-10 23:42:26 -08:00
Jason Short 5a91396f63 Added climb rate control 
removed unused vars
 2012-01-10 23:42:26 -08:00
Jason Short dab4fb43d4 Added altitude change flags 2012-01-10 23:42:26 -08:00
Jason Short 351be7c305 Made timer unsigned 2012-01-10 23:42:26 -08:00
Jason Short 7b8767d846 Added comments 2012-01-10 23:42:26 -08:00
Jason Short b1e971ea18 added location error calc to get better data. Otherwise we'll be 1 GPS read off. 2012-01-10 23:42:26 -08:00
Jason Short 5f55780b5e Added comments 
moved out failsafe check. otherwise the reporting was erroneous.
 2012-01-10 23:42:26 -08:00
Jason Short 92f7b22722 Moved failsafe check to more logical place 2012-01-10 23:42:26 -08:00
Jason Short cf92631d33 added #if to wind compensation code 2012-01-10 23:42:26 -08:00
Pat Hickey fc6321b7ca ArduCopter motors_y6: rewrite CH_ macros with MOT_ macros 2012-01-09 22:06:49 -08:00
Pat Hickey 927e60d85b ArduCopter motors_y6: rewrite loop in terms of motors 2012-01-09 22:06:49 -08:00
Pat Hickey ac7f6a5602 ArduCopter motors_tri: rewrite CH_ macros with MOT_ macros 
* Third Tricopter motor was on CH_4, so it is called MOT_4. This
  will be changed in a subsequent commit.
 2012-01-09 22:06:49 -08:00
Pat Hickey 73610ddb6c ArduCopter motors_octa_quad: rewrite remainder from CH_ macros to MOT_ macros 2012-01-09 22:06:48 -08:00
Pat Hickey 7f4c994346 ArduCopter motors_octa_quad: rewrite loop in terms of motors 2012-01-09 22:05:01 -08:00
Pat Hickey e2be119433 ArduCopter motors_octa: rewrite remainder from CH_ macros to MOT_ macros 2012-01-09 21:57:02 -08:00
Pat Hickey 46b8037a73 ArduCopter motors_octa: rewrite janky loops to use ch_of_mot 
* Previously the loop was written over channels, now it is over motors
* the correct channel for that motor is determined by ch_of_mot.
* ch_of_mot is defined correctly based on the config_channels macros.
 2012-01-09 21:57:02 -08:00
Pat Hickey 79030a84b8 ArduCopter motors_hexa: rewrite remainder from CH_ macros to MOT_ macros. 2012-01-09 21:57:02 -08:00
Pat Hickey f7e14fff37 ArduCopter motors_hexa: rewrite janky loops to use ch_of_mot 
* Previously the loop was written over channels, now it is over motors
* the correct channel for that motor is determined by ch_of_mot.
* ch_of_mot is defined correctly based on the config_channels macros.
 2012-01-09 21:57:02 -08:00
Pat Hickey b907c1fd5c ArduCopter: add ch_of_mot lookup to motors.pde 2012-01-09 21:57:02 -08:00
Pat Hickey 7535c1c3fe ArduCopter test.pde: translate from CH_ to MOT_ notation 2012-01-09 21:57:02 -08:00
Pat Hickey 6a4442557c ArduCopter setup.pde: translate from CH_ to MOT_ notation 2012-01-09 21:57:02 -08:00
Pat Hickey 91bc2698a8 ArduCopter radio.pde: translate CH_ to MOT_ outputs 2012-01-09 21:57:02 -08:00
Pat Hickey 2f63c636ad Rename ArduCopter/config_motors.h to config_channels.h 2012-01-09 21:57:02 -08:00
Pat Hickey f5b6746ad7 ArduCopter: Change TRI_FRAME yaw servo output to CH_TRI_YAW define 2012-01-09 21:57:02 -08:00
Pat Hickey c105f64dca ArduCopter Camera.pde: changed from CH_n to CH_CAM_ notation. 2012-01-09 21:57:02 -08:00
Pat Hickey e0e430895e motors_quad: translate from CH_ to MOT_ notation. 2012-01-09 21:57:02 -08:00
Pat Hickey 0b40f55334 ArduCopter: include config_motors.h in sketch 2012-01-09 21:57:01 -08:00
Pat Hickey e5e8ed8a54 ArduCopter config_motors.h: stubs in for CH_CAM_PITCH and CH_CAM_ROLL 2012-01-09 21:57:01 -08:00
Pat Hickey 9eae2ec7fe ArduCopter config_motors.h: proper defs for APM1 MOT_[5..8] 2012-01-09 21:57:01 -08:00
Pat Hickey a30558e9b2 ArduCopter config.h: add standard ifndef/define header macro wrappers 2012-01-09 21:57:01 -08:00
Pat Hickey a7628b7f78 ArduCopter: add config_motors.h with MOT_n to CH_m mapping 
* APM1 values are not valid, but hopefully APM2 will stay that way?
 2012-01-09 21:57:01 -08:00
Pat Hickey a19afd926a APM_RC & ArduCopter: Change interface to SetFastOutputChannels to use _BV 
* Every use of MSK_CH_n changed to _BV(CH_n)
* Easier to read, and will allow CH_n to be parameterized without needing
  a separate macro expansion for the MSK value.
 2012-01-09 21:57:01 -08:00
Jason Short 78255b722e Slowed Auto Descent 
Don't return true in Landing code to prevent flyways in Stabilize
 2012-01-08 23:01:22 -08:00
Randy Mackay f68d23d91e ArduCopter - added ROLL_PITCH_STABLE_OF (i.e. Stabilised Roll/Pitch + adjustments based on optical flow) 
Removed optical flow from regular loiter for now until it's tested.
 2012-01-09 13:53:54 +09:00
analoguedevices d46f36e624 Put in commented-out APM2 #defines, to save people the trouble of having to type them in themselves 2012-01-09 01:59:55 +00:00
Jason Short d45c0ce9f2 Added Acro to Rate_P 2012-01-08 14:52:10 -08:00
Randy Mackay 3dfa26920f ArduCopter - changed Sonar to use A1 (was AN4) 2012-01-08 17:48:30 +09:00
Jason Short f4b530ebb1 R8 2012-01-07 22:28:03 -08:00
Jason Short 48c211e055 Added finish to missions - auto-land or stabilize 2012-01-07 22:27:26 -08:00
Jason Short 9c8122e061 converted auto land to use the mission planner version 
Removed gate that looked for already set control_mode. Wasn't compatible with failsafe
 2012-01-07 22:27:26 -08:00
Jason Short 63be9c5f7b Moved wind comp into a define 2012-01-07 22:27:26 -08:00
Jason Short 06e032db68 Quad frame - X is default 
added wind comp stability option to config - off by default
 2012-01-07 22:27:26 -08:00
Jason Short 6678edf243 Auto-land updates - removed sonar option - not needed 
updates from JLN
 2012-01-07 22:27:26 -08:00
Jason Short 76dd79e7b5 Made RTL hold position until it reaches altitude 2012-01-07 22:27:26 -08:00
Jason Short dd42f06275 Cleanup 2012-01-07 22:27:26 -08:00
Jason Short faa9dd43cf scaled to 0-1023 2012-01-06 21:43:37 -08:00
Jason Short ee0551037e Revved to R7 2012-01-06 10:22:53 -08:00
Jason Short 98f9a5f237 Forced Faildafe throttle mode to throttle Auto 2012-01-06 10:21:50 -08:00
Jason Short 5b66a09688 Added check for armed motors in failsafe 2012-01-06 10:21:23 -08:00
Jason Short c9f60f239d Added Note 2012-01-06 10:20:59 -08:00
Jason Short 8f3c577e47 Made RTL go up 10m for failsafe 2012-01-06 10:20:48 -08:00
Jason Short 17873eb09c Changed default throttle type for failsafe to avoid checking 
changed timer to 20 seconds.
 2012-01-06 10:20:31 -08:00
Jason Short e116636fe9 Auto_land update 2012-01-05 21:57:34 -08:00
Jason Short e3c16fc1b1 Added auto_land to RTL 2012-01-05 21:15:12 -08:00
Jason Short 40ad164c8d Clears Auto_land timer 2012-01-05 21:15:12 -08:00
Jason Short 20661e5020 timer set to unsigned 2012-01-04 17:31:20 -08:00
Andrew Tridgell df81a9459a ACM: reset all I terms on gyro calibration 2012-01-05 10:15:14 +11:00
Andrew Tridgell 2913948520 ACM: fixed a warning 
comment out some unused debug code
 2012-01-05 10:14:53 +11:00
Andrew Tridgell c1c3115b42 ACM: fixed a alt hold bug 
== instead of =
 2012-01-05 10:14:30 +11:00
Andrew Tridgell 92f9c0b648 ACM: fixed a signed/unsigned warning 2012-01-05 10:14:12 +11:00
Andrew Tridgell 596a1f43f4 ACM-simple: don't use uninitialised simple trig values 2012-01-05 10:13:36 +11:00
Jason Short 3cf77729ef Disabled stable mode wind comp by default for release 2012-01-04 09:28:38 -08:00
Jason Short 28262dd825 Added Xplane output option 2012-01-04 09:28:38 -08:00
Jason Short 467ef66a77 Added home offset for altitude 2012-01-04 09:28:38 -08:00
Jason Short 40c649a27b Made landing disarm the motors 2012-01-04 09:28:38 -08:00
Jason Short ed1ff0b171 Upped Revision 2012-01-04 09:28:38 -08:00
Jason Short 76cfdca6cc Cleaned up and documented each global vavriable 
Added Wind compensation for Stability
Acro mode fixes
 2012-01-04 09:28:37 -08:00
Jason Short 2e83e42764 Added precalc for wind compensation when entering Stabilze mode 2012-01-04 09:28:37 -08:00
Jason Short e36d2f6e96 Added Wind compensation for Stabilize 
moved speed calc to it's own function
decreased acceleration from WPs
 2012-01-04 09:28:37 -08:00
Jason Short fe8c99c49b removed PM test field 1 - not needed 2012-01-04 09:28:37 -08:00
Jason Short a2c8f5af15 removed unused vars 2012-01-04 09:28:37 -08:00
Jason Short de6325fb8a removed unused vars 2012-01-04 09:28:37 -08:00
Jason Short cf9e744ed2 removed unused vars 2012-01-04 09:28:37 -08:00
Jason Short 8ed2d96396 removed unused var 2012-01-04 09:28:37 -08:00
Jason Short 59f22f0ca0 removed airspeed 2012-01-04 09:28:37 -08:00
Jason Short ecb3241489 calc_wind_compensation called when exiting AP modes 
Rate I terms reset in Acro Mode switch
Limit of 1 m set to alt hold
Reset circle angle to 0 by default
Land got land_complete var set to false by default
 2012-01-04 09:28:37 -08:00
Jason Short 4e0e783e7c added Reset_Rate_I function 
Removed I term from Throttle rate calc
Added some basic constrains to Acro
 2012-01-04 09:28:37 -08:00
Jason Short b8c0bdb66f removed airspeed 2012-01-04 09:28:37 -08:00
Jason Short 92eece79a4 cleanup - removed unused functions, made pressure reading Float to avoid extra cast 2012-01-04 09:28:36 -08:00
Jason Short e1232e7b80 cosmetic 2012-01-04 09:28:36 -08:00
Jason Short e7b750074b Added takeoff state and ground state variable 2012-01-04 09:28:36 -08:00
Jason Short 37cda3c364 Cosmetic 2012-01-04 09:28:36 -08:00
Jason Short 2fc6a645b4 removed unused Airspeed config 2012-01-04 09:28:36 -08:00
Jason Short b28ae04e0d Removed unused options 2012-01-04 09:28:36 -08:00
Jason Short 6513b12eb2 Cosmetic 2012-01-04 09:28:36 -08:00
Jason Short 67bf991598 removed unused Airspeed config 2012-01-04 09:28:36 -08:00
Jason Short c7b5b747e8 change how Reset Nav params work - no longer clear I terms 2012-01-04 09:28:36 -08:00
Jason Short 580ad2c5ce Added JLN's landing patch, moved some variables local such as Jump counter 2012-01-04 09:28:36 -08:00
Jason Short c0c2ea4ebb removed unused functions 2012-01-04 09:28:36 -08:00
Andrew Tridgell ca39fc8b47 sitl: added build targets for different ACM frames 2012-01-04 21:45:46 +11:00
Andrew Tridgell 9d1c4ecfcd ACM: don't set defaults in APM_Config.h 
defaults set here prevent Makefile overrides, which breaks autotest
for non-default frame types
 2012-01-04 19:35:05 +11:00
Andrew Tridgell cdd5589498 I2c: default to 5ms timeout, and faster bus speed 
we will slow down the speed when we get a failure
 2012-01-04 16:36:47 +11:00
Jason Short 26d0bf93ff Added more constraints around velocity 2011-12-31 10:59:59 -08:00
Jason Short b3cea96970 Cosmetic 2011-12-31 10:54:31 -08:00
Jason Short 74b203c7f2 Lowered Yaw to prevent overshoot based on feedback 2011-12-31 10:10:45 -08:00
Jason Short ea832c0818 upped to r5 2011-12-31 10:05:13 -08:00
Jason Short 1ef7f9fe62 Loiter I reset 2011-12-31 09:45:25 -08:00
Jason Short 0ace8474d7 R4 2011-12-30 23:54:02 -08:00
Jason Short c6586810cf New Style WP navigation for high wind 2011-12-30 23:48:05 -08:00
Jason Short 2cb09f46e9 no longer calling reset_nav 2011-12-30 23:48:04 -08:00
Jason Short 6a8391f0a7 removing I term clearance 2011-12-30 23:48:04 -08:00
Jason Short 28984a72e4 no longer calling reset_nav 2011-12-30 23:48:04 -08:00
Jason Short 26267f75b2 Reverted to Crosstrack like in Arduplane, requires Degrees * 100 2011-12-30 23:48:04 -08:00
Jason Short dac29af7ab Sync with Arduplane 2011-12-30 23:48:04 -08:00
Jason Short c7f93f8718 Updated Configs based on field testing. 2011-12-30 23:48:04 -08:00
Jason Short 15a377d759 Added a default Yaw tracking setting 
Added Nav_Bearing
 2011-12-30 23:48:04 -08:00
Jason Short 84d3e3135f Added Nav_bearing, just like APlane 
added fix for LOITER in missions so we don't Yaw in circles
 2011-12-30 23:48:04 -08:00
Jason Short cf48091d00 removed old loiter method option 2011-12-30 23:48:04 -08:00
Randy Mackay 3cb74cb459 ArduCopter - init_compass - fixed HIL build issue 2011-12-31 12:29:54 +09:00
Jason Short 3ea49e1415 updated rev 2011-12-29 23:02:41 -08:00
Jason Short 21460a57ae Yaw Performance tweaks 2011-12-29 23:02:03 -08:00
Jason Short 95a70cf32e lowered to nav_lat and nav_lon int16 
added a version that didn't have I term added to get a better indication of velocity estimation
 2011-12-29 23:02:03 -08:00
Jason Short 10abb7871e removed loiter I from Reset Nav 2011-12-29 23:02:03 -08:00
Jason Short 17acbc4572 updated Loiter gains 2011-12-29 23:02:03 -08:00
Jason Short 53c09774e5 removed Rate_I from Loiter, lowing Rate_P from Loiter too. Too aggressive leads to rapid oscillations in air, and not around loiter position. 2011-12-29 23:02:03 -08:00
Jason Short 2c1fe93856 cosmetic 2011-12-29 23:02:03 -08:00
Jason Short 6f42442e57 Added 5 sec Takeoff Timer to clear i terms when lifting 
Moved loiter relocation function to update_nav
moved User hooks to correct place
Added tuning for D term
 2011-12-29 23:02:03 -08:00
Jason Short f41835d546 Added Stabilize_D parameter 2011-12-29 23:02:02 -08:00
Jason Short bb954bc479 Upped Yaw speed to deal with performance complaints 
Added new Stabilize D term default of .25
 2011-12-29 23:02:02 -08:00
Jason Short d055763947 Added second order, filtered derivative in stabilize. Works much better than the non-filtered one I used to have. 2011-12-29 23:02:02 -08:00
Jason Short fa49aa5eec Fixes for Smooth Loiter 2011-12-29 23:02:02 -08:00
Jason Short 4f60fa412c Set Define for Max throttle 2011-12-29 23:02:02 -08:00
Jason Short 8a921e869c Fixed a 1280 only test 2011-12-29 23:02:02 -08:00
Jason Short db96b9ec7a added define for Max throttle 2011-12-29 23:02:02 -08:00
Jason Short 244ca98264 Added Dampening term for tuning 2011-12-29 23:02:02 -08:00
Jason Short 7e1e1f84b3 updated Loiter PIDs 2011-12-29 23:02:02 -08:00
Jason Short 4b5437afe8 Enable Magnetometer by default 2011-12-29 23:02:02 -08:00
Jason Short 51e6170ecb Missing ; 2011-12-29 23:02:01 -08:00
Jason Short 4353f60f60 removed takeoff complete flag from missions, not used and would be useful elsewhere. 2011-12-29 23:02:01 -08:00
Jason Short fbb35928fe removed unused function 
Simplified the baro init filter
 2011-12-29 23:02:01 -08:00
Randy Mackay bbe6dea980 OptFlow - initial support for APM2 (there are still problems) including adding ability to set Chip Select pin. 
Other unrelated changes are:
a) fixed typo in 'esitmate_velocity' to 'estimate_velocity'.
b) moved init_compass from system.pde to sensors.pde which seemed consistent with other sensors.
 2011-12-30 12:06:31 +09:00
Andrew Tridgell 955dfe0226 ACM: check compass health before using it 2011-12-28 20:41:53 +11:00
Andrew Tridgell 03a16c6e45 ACM: use new I2C library 2011-12-28 20:41:53 +11:00
Andrew Tridgell 433df08cb3 ACM: enable compass by default on APM2 2011-12-28 20:30:35 +11:00
Andrew Tridgell 73e6d5ee11 ACM: update for DataFlash changes 2011-12-28 16:00:49 +11:00
Jason Short 234121f3c3 Fix for 11 channels of motors. 2011-12-26 14:39:01 -08:00
Andrew Tridgell 4fe527aefa ACM: use LED_OFF/LED_ON instead of LOW/HIGH 2011-12-26 19:32:53 +11:00
Andrew Tridgell 111d156a99 ACM: fixed HIL build again 2011-12-26 19:17:11 +11:00
Andrew Tridgell ab64a689c8 ACM-log: use DataFlash.df_NumLogs 
this fixes the flash size on APM2
 2011-12-26 19:17:11 +11:00
Randy Mackay 07041c2149 TradHeli - modified the default collective min/max values to restrict movement to about half the full range. 2011-12-26 16:59:01 +09:00
Jason Short 1afa25d9ef Tweaks to fix Loiter 
Changed save location to int32
added some filtering and smoothing
 2011-12-25 15:44:49 -08:00
Randy Mackay c24b5229e1 AP_GPS - updated MTK rate to 10Hz and fixed lat/lon printing inaccuracy in Arducopter logs and AP_TEST example sketch 2011-12-25 12:33:06 +09:00
Andrew Tridgell 0dadbf932a removed "Please run setup" loop from ArduCopter 
Chris asked for this to be removed as it was really mucking up the
initial experience setting up ArduCopter via the planner
 2011-12-24 18:12:51 +11:00
Jason Short cc4f5e7c74 disabled some tests with warnings 2011-12-23 18:54:38 -08:00
Jason Short 0491d4feca added define for optflow 2011-12-23 18:45:01 -08:00
Jason Short d7af42c925 Getting rid of Simple Logging 2011-12-23 18:44:30 -08:00
Jason Short 0f91fbcee5 Made WP radius 1 by default 2011-12-23 15:01:53 -08:00
Jason Short d9590a44d6 Fixed merge issues 2011-12-23 14:51:40 -08:00
Jason Short e5a3899b7f added ability to enter Loiter with only optflow available 2011-12-23 14:46:32 -08:00
Jason Short 73a73fbf35 moved some defines around 2011-12-23 14:46:32 -08:00
Jason Short 5518882c69 Fixed resolution issue with Xtrack 
Added stub for loiter based on estimation
integrated fix for tracking GPS at slow speeds for loiter
 2011-12-23 14:46:32 -08:00
Jason Short 2d46022a2b This is the test to deal with big props with lots of inertia. We use a low pass filter on positive acceleration. 2011-12-23 14:46:32 -08:00
Jason Short 58ad9faf6d initing z dampener at arming 2011-12-23 14:46:08 -08:00
Jason Short 5f03c62bd9 Too complicated 2011-12-23 14:46:08 -08:00
Jason Short be4b031c7d added back in the Disabled log - gave up on Log Simple idea 2011-12-23 14:45:56 -08:00
Jason Short ca8f71a705 used for testing 2011-12-23 14:42:50 -08:00
Jason Short a966a178f8 increased crosstrack thanks to float math fix 
decreased loiter iterm, decreased throttle iterm based on simulator runs
 2011-12-23 14:42:50 -08:00
Jason Short a284fc222c No longer blocking before initing home 2011-12-23 14:42:50 -08:00
Jason Short 79fff0f096 the second accel test is just for fun. 
Filtered output for Nav_throttle
 2011-12-23 14:42:50 -08:00
Jason Short 62cb407558 Begin to better integrate OptFlow, added necessary globals for Loiter estimation 2011-12-23 14:42:50 -08:00
Jason Short 85b564c5eb removed some unneeded HIL #defines 2011-12-23 14:42:49 -08:00
Pat Hickey c40fccbc26 Log_simple uses identical implementation of do_erase_logs. 
* fix build1280.ArduCopter
 2011-12-22 13:31:28 -08:00
Pat Hickey f1624621b3 ArduCopter Logging: DISABLED means DISABLED again; CONFIG_LOGGING added 
CONFIG_LOGGING selects LOGGING_SIMPLE and LOGGING_VERBOSE. Verbose
logging is the default, implemented in Log.pde. Simple logging is
optional, but the default for the 1280 build, implemented in
Log_simple.pde
 2011-12-19 21:04:51 -08:00
Randy Mackay 310f072d50 Arducopter - added "//#define APM2_BETA_HARDWARE" to AP_Config.h for developer's who received early version of the board with the old barometer 2011-12-19 22:57:00 +09:00
Jani Hirvinen 106801a59c config settings for jD motors 2011-12-19 09:29:05 +07:00
Jason Short b53a6bd4b4 Hexa stability patch bug fix by borna.segulin 2011-12-18 16:38:07 -08:00
Jason Short 239eb53983 change Alpha name 2011-12-18 16:38:07 -08:00
Andrew Tridgell ad9c0533d8 ACM: run mavlink loop while erasing logs 2011-12-18 10:19:41 +11:00
Jason Short 8970948804 Sync logging 2011-12-16 22:02:41 -08:00
Jason Short 47e4c875e1 Cleanup 
removed Iterm experiment - no noticeable effect in actual flight
 2011-12-16 20:47:23 -08:00
Andrew Tridgell f6f808357c removed AperiodicProcess code 
this code was never being used, and was more complex than it was
worth.
 2011-12-17 07:29:09 +11:00
Jason Short 2fc25d963d renamed super simple, added framework for auto calc of throttle cruise 2011-12-15 20:51:41 -08:00
Jason Short 3019c35364 turned off iterm for traverse 2011-12-15 20:51:41 -08:00
Jason Short f11f2c6d97 added some more throttle imax range 
renamed Super Simple
 2011-12-15 20:51:41 -08:00
Jason Short 72605f846c renamed super simple 2011-12-15 20:51:41 -08:00
Jason Short 88b3708dcf added altitude to circle mission 2011-12-15 20:51:40 -08:00
Jason Short 0ba8a9f30b Allows user to specify just an altitude for Circle Mode 2011-12-15 20:51:40 -08:00
Jason Short 4e280bb0dc More power to descend 2011-12-15 20:51:40 -08:00
Jason Short 3446744ae9 Addition of nav mode that tries to maintain level 2011-12-14 22:08:42 -08:00
Jason Short 4d90058c90 dupe of landing logic for scripting 2011-12-14 22:08:41 -08:00
Jason Short f48e394511 made the last step of landing stop navigating so we can drop straight down. 2011-12-14 22:08:41 -08:00
Jason Short 1251e8105d Added failsafe check 2011-12-14 22:08:41 -08:00
Jason Short c6657f4a93 updated Loiter control to provide an alternative to GPS rate control for users with circling issues. Works in SIM, needs flight testing 2011-12-14 22:08:41 -08:00
Jason Short d2fd6c5ee5 added loiter control to reset nav 2011-12-14 22:08:41 -08:00
Jason Short 8691b10ee9 added failsafe check, 
enable loiter repositioning
 2011-12-14 22:08:41 -08:00
Doug Weibel 5d197ae337 Change logging to default on for 2560 2011-12-13 20:53:44 -07:00
Doug Weibel 8b78c4a4c5 Changes to logging file system to avoid problems with 0 and 1 page logs 2011-12-13 20:09:07 -07:00
Michael Oborne e20d3a3676 add method of detecting if motors are armed 2011-12-14 06:18:29 +08:00
Randy Mackay 7f64080877 Arducopter - Attitude.pde - fixed small bug in pitch stabilise 2011-12-13 22:10:51 +09:00
Andrew Tridgell 483bef35e5 IMU: update ACM and APM for flash_leds change in IMU init 2011-12-13 18:19:41 +11:00
Andrew Tridgell 888d6226b2 fixed two more CONFIG_HARDWARE #ifdef bugs 2011-12-13 17:05:48 +11:00
Jason Short edc3a731d4 Adjustments for High Wind enviroments 2011-12-12 17:47:45 -08:00
Jason Short ba8fc57bd8 Stability patch2 - Jose style. 2011-12-12 17:47:45 -08:00
Jason Short c9b317fc27 Gain updates 2011-12-12 17:47:45 -08:00
Jason Short f3e408e7e0 Added a simplified Log that is just GPS for my 1280 board 2011-12-12 17:47:45 -08:00
Jason Short e4559bbf5c Added param option for Simple mode reset 2011-12-12 17:47:45 -08:00
Jason Short d83ad1acd4 Upped the max pitch to deal with wind - based on T3 testing 2011-12-12 10:10:33 -08:00
Jason Short 6bc90d6289 Just upped the nav_imax value 2011-12-12 10:10:33 -08:00
Andrew Tridgell a22893124d fixed LOGGING_ENABLED default on ArduCopter 2011-12-12 23:40:43 +11:00
Andrew Tridgell 5760239670 quad: fixed the comments on the + motors 2011-12-12 21:01:58 +11:00
Andrew Tridgell d076fb54b5 fixed barometer detection on APM2 2011-12-12 15:45:36 +11:00
Andrew Tridgell f5e439554d fixed == that should be = 2011-12-12 15:19:50 +11:00
Andrew Tridgell 358dc91d41 fixed hil ArduCopter build 2011-12-12 15:14:55 +11:00
Andrew Tridgell 07dba4eff7 desktop: fixed Wire.begin() build problem 2011-12-12 15:14:55 +11:00
Andrew Tridgell 1b1c629167 added sitl build target 2011-12-12 15:14:55 +11:00
Andrew Tridgell 011110e1dd airspeed: use floating point values and better averaging in zero_airspeed() 
this makes the calibration of airspeed a bit more accurate, and
prevents truncation of airspeed values
 2011-12-12 15:14:55 +11:00
Pat Hickey a48c65b5b5 ArduCopter: update AP_Baro constructors & initializers 2011-12-11 15:21:10 -08:00
Pat Hickey f3ad7f3af8 Wire and SPI Init: move to sketch system.pde from libraries 
* Wire.begin removed from AP_Baro_BMP085::init()
* SPI.begin  removed from AP_Baro_MS5611::init()
* SPI.begin  removed from AP_InertialSensor_MPU6000::hardware_init()

* Both Wire.begin and SPI.begin added very early in init_ardupilot in
  ArduCopter/system.pde and ArduPlane/system.pde
 2011-12-11 15:21:10 -08:00
Pat Hickey 6dbd6b4181 ArduCopter: Get barometer data in terms of AP_Baro interface 
* Major change: Log.pde Log_Write_Control_Tuning has changed significantly
* MS5611 has no concept of RawPres and _offset_press
* Log the get_pressure() instead. (If we don't trust the barometer, what's the point?)
 2011-12-11 15:21:10 -08:00
Pat Hickey 39fe9075d9 ArduCopter Init: different call to barometer.init based on CONFIG_BARO 
* BMP085 has two arguments, second varying on apm1/apm2
* ms5611 has no arguments
 2011-12-11 15:21:10 -08:00
Pat Hickey b055aa6f81 ArduCopter: instantiate correct AP_Baro object based on CONFIG_BARO 2011-12-11 15:21:09 -08:00
Pat Hickey d7f77aec93 ArduCopter & ArduPlane: Added support for apm2beta build via APM2_BETA_HARDWARE define 
* This enables the BMA085 driver for compatibility with beta boards.
* The CLI_SLIDER_ENABLED=DISABLED line does not need to be in the makefile.
  config.h takes care of this default.
 2011-12-11 15:21:09 -08:00
Pat Hickey 62844d8ddc ArduCopter: added config.h and defines.h to support CONFIG_BARO 2011-12-11 15:21:09 -08:00
Pat Hickey de6507a47d ArduCopter: Rename APM_BMP085 classes to AP_Baro_BMP085 classes. 2011-12-11 15:21:09 -08:00
Pat Hickey 8d878a2cae ArduCopter CLI: Add imu.init before imu.init_accel for "level" 
* Depending on when you entered the CLI, the imu might not be
  initialized yet, and init_accel would hang.
 2011-12-11 15:19:46 -08:00
Pat Hickey 2e200834e1 ArduCopter: Revert "Switched to Gyro only startup" 
This reverts commit f932f0a9f6a29e9c3193622109298c657ed5a908.

I fixed this bug in 734185599cd9d6a487c675460c09895172e012b0.

It is no longer valid to call IMU::init_gyro() before IMU::init().
 2011-12-11 14:50:02 -08:00
Jason Short 5d0e3664ad Hack to prevent fly aways 
Cleanup to remove SIMPLE mode switch note
 2011-12-11 12:01:06 -08:00
Jason Short e8e126a636 removed CLI switch by default, decreased Nav I 2011-12-11 09:53:44 -08:00
Jason Short c1aa015ef1 added debug prints, broke out Angle val to debug 2011-12-11 09:53:44 -08:00
Jason Short a685e5b575 fix for navigation scaleLongUp 2011-12-11 09:53:44 -08:00
Randy Mackay fe336fb749 ArduCopter - small fixes to fix HIL compile errors 2011-12-11 23:25:03 +09:00
Randy Mackay 67855b207d Arducopter, RangeFinder - added SONAR_TYPE parameter and properly support the XL (default), LV and long distance XL (aka XLL) sonar types 2011-12-11 16:40:59 +09:00
Jason Short f89fed02c3 made it so nav is called in Simple mode 2011-12-10 23:31:37 -08:00
Jason Short 4659a9ffce Adjust Simple mode on the fly. 2011-12-10 23:29:29 -08:00
Jason Short af0ae6a10f Set Nav_WP as home 2011-12-10 23:26:10 -08:00
Jason Short 1f3abcf048 eased up on the i term blocker 2011-12-10 23:25:52 -08:00
Jason Short 069bcbf5e6 Made landing slower 2011-12-10 19:33:19 -08:00
Jason Short 873daae095 Allows you to clear the stored mission when in Auto 2011-12-10 19:32:46 -08:00
Jason Short 29554b7d73 Will add a landing command to last WP if we are on the ground. 2011-12-10 19:29:42 -08:00
Jason Short 648ab5f4ae Switched to Gyro only startup 2011-12-10 15:13:20 -08:00
Jason Short f3ff7aa0a8 rework of inflight trim. 2011-12-10 15:05:53 -08:00
Jason Short 5e12924907 Removed Instant PWM from disarmed output 2011-12-10 10:33:25 -08:00
Jason Short 0289e35347 Ground course saved as long for SIM compat 2011-12-10 10:19:20 -08:00
Jason Short 84b72b627b Added SIMPLE mode reset outside of bounding box of 10M, will do more testing before enabling. 2011-12-10 10:19:20 -08:00
Jason Short 7cecca74bc Made Baro_alt int32_t 
Added home to copter bearing, home to copter distance
Added Land mode
 2011-12-10 10:19:20 -08:00
Jason Short 69f1841d8e Debugging some motor issues 2011-12-10 10:19:20 -08:00
Jason Short 76d60a2111 Added Home Bearing 2011-12-10 10:19:20 -08:00
Jason Short d9347290a4 Added notes to Imu.ax, ay, az 2011-12-10 10:19:20 -08:00
Jason Short 2b8280e533 Added enumeration for Land 2011-12-10 10:19:20 -08:00
Jason Short 307723960d Increased slightly the Auto_trim time 2011-12-10 10:19:20 -08:00
Jason Short 3ff7b047d5 Added Bearing to home, distance to home calcs 2011-12-10 10:19:20 -08:00
Jason Short 49806d93d9 Added Land FLight mode definition 2011-12-10 10:19:20 -08:00
Randy Mackay 0b24914066 OptFlow - turning on optical by default 2011-12-10 23:22:40 +09:00
Randy Mackay fa0723f115 ArduCopter - removed limitation on Maxbotix sonar type requiring ADC so it can work with APM2. 
modified default analog pin in test sketch to be AN4 which is consistent with APM2 default
 2011-12-10 18:33:30 +09:00
Pat Hickey cc38189f71 ArduCopter config: Correct LOGGING_ENABLED defaults to force disable for 1280 
Per email, this is what Jason meant to do in aeb92870, but previous code
forced logging enable for all non-1280 users.
 2011-12-09 15:06:10 -08:00
Randy Mackay 4dc2956ca9 Navigatino - small bug fix in loiter controller in which the y_iterm was coming from the Lon controller instead of the lat controller. Found by Sylvain. http://www.diydrones.com/forum/topic/listForContributor?user=18fsncw0k1x6i 2011-12-09 22:13:37 +09:00
Randy Mackay 42421a09e2 TradHeli - Attitude.pde - made yaw contol use jason's stability patch 
Quad - fixed small bug in pitch control (was using roll's stabilise controller)
 2011-12-08 22:23:50 +09:00
Randy Mackay 68e6be5eeb TradHeli - fixed roll/pitch so it's not scaled when throttle is scaled 2011-12-08 21:30:47 +09:00
Doug Weibel 502a98dda1 Add hook to dump log filesystem index for debugging 2011-12-07 08:13:30 -07:00
Jason Short 6dfdd754ea Stability patch updates, 
Cleanup
 2011-12-06 21:03:56 -08:00
Jason Short 05409b8c1c made RateP range a little more sensible 
removed unused var
 2011-12-06 21:03:07 -08:00
Jason Short a632c49b44 Alt_hold_patch, removed Z dampening from Manual override. Fixed integrator conversion to throttle_cruise 2011-12-04 21:32:33 -08:00
Jason Short e8a14c8d93 simple patch to improve alt hold based on stability patch 2011-12-04 21:32:33 -08:00
Jason Short 9bc6fce3b8 Function call defs commented with // so the preprocessor doesn't get confused 2011-12-03 17:55:44 -08:00
Jason Short 0d8071a401 Added new gain and clamp value for DCM 2011-12-03 17:55:11 -08:00
Jason Short 54c8e1033c Fixing reversed Simple mode switch 2011-12-03 17:54:57 -08:00
Jason Short aad45c692f Stability patch from 55 2011-12-03 17:54:38 -08:00
Jason Short 778393c4a7 Enabled the compass test 2011-12-03 15:39:02 -08:00
Jason Short 5ed300db7e disabled Flash logs in 1280 by default 
Added stability patch I values and limits
 2011-12-03 15:38:46 -08:00
Jason Short c99da66506 Formatting, swicth Omega to raw IMU rates 2011-12-03 15:29:33 -08:00
Jason Short 401c985572 Added Deg to rad, rad to deg * 100 to save a float calc 2011-12-03 15:29:33 -08:00
Jason Short d7cc241f85 formatting 2011-12-03 15:29:33 -08:00
Michael Oborne 4c61462dfd Merge branch 'master' of https://code.google.com/p/ardupilot-mega 2011-12-04 06:32:27 +08:00
Michael Oborne edf3195384 add 1hz mavlink loop. 2011-12-04 06:32:08 +08:00
Andrew Tridgell 39a36fe946 fixed the "reboot on GPS lock" bug 
the problem was that with APM2 we may not have a 2nd GCS instance. The
"gps alt: xxx" message was being unconditionally sent to both GCS
instances, which caused a crash
 2011-12-04 09:06:58 +11:00
Andrew Tridgell aaac6212ab MAVLink: use the configured system ID for ArduCopter 2011-12-03 07:54:36 +11:00
Jason Short 9931cacec7 Enabled Ch7 simple mode switching 2011-11-28 22:41:12 -08:00
Jason Short 69dd8264e6 adding flag for finished mission 2011-11-28 22:28:51 -08:00
Jason Short b92b4e9092 cleanup 2011-11-28 21:40:22 -08:00
Jason Short eb6d34e1fc Fix error with calc_nav_pitch_roll 2011-11-28 21:27:29 -08:00
Doug Weibel 88ab4f7d70 Fix for intermittent bug of log #1 starting on page 2 and confusing file system 2011-11-28 19:43:10 -07:00
Doug Weibel b03de3095e Add DataFlash.Init before doing a forced log erase on eeprom reset. 
Add progress indication during log erase
 2011-11-28 19:42:27 -07:00
Jason Short b4a0d8a275 Fixed navigation bug 2011-11-28 14:22:05 -08:00
Jason Short ce5ad442fc Git Test 2011-11-28 10:54:20 -08:00
Jason Short 62ed256fca made the crosstrack use the previous WP instead of the current loc to get a better line in AP. 2011-11-28 10:33:06 -08:00
Jason Short 82adf1df6b removed need to send increment flag to update commands 
constrained climb_rate value
 2011-11-28 10:33:06 -08:00
Jason Short 504b4b52d6 slight refactoring to avoid the increment issue when changing commands 2011-11-28 10:33:06 -08:00
Jason Short 4a6feb3acb better comments out of some old unused functions to avoid compiler errors 2011-11-28 10:33:06 -08:00
Jason Short 909e5796eb Logging input to find this freeze bug 2011-11-28 10:33:06 -08:00
Jason Short df57380adc Erasing Logs causing major havoc. Users getting infinite loop. 2011-11-28 10:33:05 -08:00
Jason Short cc1593d16d made Logs dump with dump 0 or -1 2011-11-27 22:23:02 -08:00
Jason Short b3bd4bd3c9 Cosmetic cleanup, commented functions for compiler warnings 2011-11-27 22:23:02 -08:00
Jason Short fb5302c50b No longer resetting ch7 wp index with mode change, requires reboot 2011-11-27 22:23:02 -08:00
Andrew Tridgell 2cabb11307 mavlink: don't force CLI and HIL with mavlink10 build 2011-11-28 16:22:33 +11:00
Jason Short 940fa9621c Added minimum Altitude for RTL failsafe 2011-11-26 16:39:29 -08:00
Jason Short 44cb73c9fa added safety checks for RTL 2011-11-26 16:39:29 -08:00
Jason Short d0af4e7200 CH7 with params 2011-11-26 16:39:29 -08:00
Jason Short ec5b080167 Enable RTL 2011-11-26 16:39:29 -08:00
Jason Short ca5e4bb802 Allow output of system type 2011-11-26 16:39:28 -08:00
Jason Short 1621f3a638 allow CH7 to be set via params 2011-11-26 16:39:28 -08:00
Jason Short ea911e0bcb updated failsafe code 2011-11-26 16:39:28 -08:00
Jason Short 19c3c27ed0 Erasing Logs at new FW version detection 2011-11-26 16:39:28 -08:00
Jason Short 52297679c4 sending Mavlink system type 2011-11-26 16:39:28 -08:00
Andrew Tridgell a048709828 Logs: don't print hundreds of bogus log boundaries 
this can take quite a long time
 2011-11-26 17:02:55 +11:00
Andrew Tridgell a99bcec762 desktop: report motors armed in desktop build too 
this helps in autotest
 2011-11-25 20:00:19 -08:00
Pat Hickey 6ee477bd8d ArduCopter: rev version number from 2.0.51 to 2.1.0 Alpha 2011-11-25 20:00:19 -08:00
Andrew Tridgell 38c85c44ae ArduCopter: rename purple to APM2 2011-11-25 20:00:19 -08:00
Andrew Tridgell 3a542b3ef3 USB-MUX: enable USB MUX switching for ArduCopter 2011-11-25 20:00:19 -08:00
Andrew Tridgell 338445e60c ArduCopter-HIL: fixed HIL build 
Logging isn't always enabled
 2011-11-25 20:00:18 -08:00
Andrew Tridgell ffba37d599 desktop: first version of register level SITL support 
this adds register level emulation of the ADS7844 and the RC
input/output hardware on the APM1, allowing for SITL testing without
enabling HIL in the code
 2011-11-25 20:00:18 -08:00
Andrew Tridgell aa558eb033 fixed a valgrind error 
this error is harmless, but false positives can disguise real errors
 2011-11-25 20:00:18 -08:00
Pat Hickey eee2da01ac Arducopter: each motors_ pde uses APM_RC.SetFastOutputChannels 2011-11-25 20:00:18 -08:00
Pat Hickey ea4c220ee9 APM_RC: OCR register init moved from ArduCopter/radio.pde to lib inits. 2011-11-25 20:00:18 -08:00
Andrew Tridgell 6093db948b compass: added AP_COMPASS_APM2_SHIELD 
this makes the orientation clearer
 2011-11-25 20:00:18 -08:00
Andrew Tridgell 41caa949ca fixed InertialSensor stub build 2011-11-25 20:00:18 -08:00
Pat Hickey 1d50bb80fd hil-sensors ArduCopter: fixes to make hil-sensors build work properly 
* requires new stub libraries for InertialSensor and PeriodicProcess.
 2011-11-25 20:00:18 -08:00
Andrew Tridgell 1e41b4b2b0 timer_scheduler doesn't exist in HIL_MODE_ATTITUDE 2011-11-25 20:00:18 -08:00
Andrew Tridgell a3701e521a build: added hlsensors target 2011-11-25 20:00:18 -08:00
Andrew Tridgell 1c20efe4b8 re-organiser sensor declarations 
this tries to make the #ifdef nesting easier to understand
 2011-11-25 20:00:17 -08:00
Andrew Tridgell 2a5a15abce test: fixed test code for HIL build 2011-11-25 20:00:17 -08:00
Andrew Tridgell 3072fdda85 adc.Init() needs timer_scheduler 2011-11-25 20:00:17 -08:00
Andrew Tridgell c0898ab3b9 purple: timer_scheduler should be in all builds 2011-11-25 20:00:17 -08:00
Andrew Tridgell 2d8cfc0c3f test: neaten up the output of the dcm test 2011-11-25 20:00:17 -08:00
Pat Hickey 3131ab16ef remove BROKEN_SLIDER code 
use the new CLI_SLIDER_ENABLED option and the "hit ENTER 3 times"
method
 2011-11-25 20:00:17 -08:00
Pat Hickey 475afd6ac2 purple: enable dcm test, and fixed imu test to test the IMU API 2011-11-25 20:00:17 -08:00
Pat Hickey c2972ff1f9 purple: fixed CLI code for non-ADC hardware and no sonar 
purple hardware does not use the ADC driver
 2011-11-25 20:00:17 -08:00
Pat Hickey 63393b206a purple: added ins test 
this tests the InertialSensor library API
 2011-11-25 20:00:17 -08:00
Pat Hickey f1bad83d21 purple: fixed system init for purple sensor objects 2011-11-25 20:00:16 -08:00
Pat Hickey e3027fe54e purple: pass isr_registry to APM_RC.Init() 2011-11-25 20:00:16 -08:00
Pat Hickey 660174e610 purple: switch ArduCopter to new sensor objects 
this uses the new sensor abstractions for the purple/APM1 hardware
choice
 2011-11-25 20:00:16 -08:00
Pat Hickey 4869ac3385 purple: use the new LED_ON/LED_OFF macros for LED level 
this gets this right on both APM1 and purple for ArduCopter
 2011-11-25 20:00:16 -08:00
Pat Hickey 3f2692d1da purple: added configuration logic for APM1 versus purple hardware 
This abstracts the names for LED on/off (due to the different wiring
of LEDs on APM1 and purple), and adds the needed config defines for
the two hardware types
 2011-11-25 20:00:16 -08:00
Pat Hickey 90c5eb8487 purple: added defines for APM hardware selection 
we can now choose APM_HARDWARE_APM1 or APM_HARDWARE_PURPLE
 2011-11-25 20:00:16 -08:00
Pat Hickey cc67062442 build: added new command line build targets 
this makes it more convenient to build common options
 2011-11-25 20:00:16 -08:00
Pat Hickey 5ee5036fa1 purple: added comment for enabling purple hardware 2011-11-25 20:00:16 -08:00
Andrew Tridgell 89d2f0f849 mod barometer.Init() based on hardware 2011-11-25 20:00:15 -08:00
Michael Oborne 0a0b2d32f4 Add rc input to cli planner mode 2011-11-26 11:23:14 +08:00
Jason Short abe4758c3b no longer using the raw pressure 2011-11-25 11:34:05 -08:00
Doug Weibel 9ecfac1156 Change ArduCopter DataFlash log file system to new file system which allows overwriting logs. 
Also changed the feature to dump all DataFlash memory to occur when user requests dumping log "-1"
 2011-11-25 07:17:15 -07:00
Jason Short c5c5884006 v number 2011-11-21 22:13:18 -08:00
Jason Short 89e014c06a Added alternate alt hold, 
New ESC Calibration Routine
 2011-11-21 22:12:19 -08:00
Jason Short 85a5647f5d cleanup 2011-11-21 22:11:06 -08:00
Jason Short 6d99e78887 removed unused function 2011-11-20 21:59:55 -08:00
Jason Short 95b797d359 removed the init_esc - reworking the method to avoid the use of the CLI. 2011-11-20 21:24:32 -08:00
Jason Short 5c797e91b5 Better function definition 2011-11-20 20:32:46 -08:00
Jason Short beeba99b92 Missed a function definition for no_logs option 2011-11-20 20:29:58 -08:00
Jason Short 2600f19172 RTL Yaw hold as default 2011-11-20 12:50:13 -08:00
Jason Short fbf09dbf2d Made save WP the default 
Cosmetic updates
 2011-11-20 12:50:12 -08:00
Randy Mackay f397bae793 ArduCopter Alt Hold - Change to not run get_nav_throttle if manually adjusting altitude with manual_boost - removes possibility of I term running up 
Tuning - added ability to modify altitude (position, not rate) controller
TradHeli - Fairly large change to how throttle is scaled and collective moves.
 2011-11-20 22:30:42 +09:00
Jason Short 17041e5346 my take at a merge to give tridge a head start at Mav1.0 2011-11-20 00:23:40 -08:00
Jason Short 556db68d2d Made loiter rad smaller in storage 2011-11-20 00:22:53 -08:00
Jason Short 7feecf3220 renamed WP mask 2011-11-20 00:22:53 -08:00
Jason Short 185c2a50ce added some params from Arduplane to make Mavlink upgrade easier 
made loiter radius smaller in storage
 2011-11-20 00:22:53 -08:00
Jason Short 94ef8a91ff removed typo 2011-11-20 00:22:52 -08:00
Jason Short 1e855503da renamed MASK_OPTIONS_RELATIVE_ALT 2011-11-20 00:22:52 -08:00
Jason Short c6f9c532af renamed set_command_with_index 2011-11-20 00:22:52 -08:00
Jason Short b883ff937c renamed the options_mask 2011-11-20 00:22:52 -08:00
Jason Short 77da1227bb renamed set_cmd function 2011-11-20 00:22:52 -08:00
Jason Short 10a24f22fa renamed set_cmd function 2011-11-20 00:22:52 -08:00
Jason Short aef4db8263 Logging stabilization KP to hunt bug 2011-11-19 16:59:54 -08:00
Jason Short 194778a6f9 Logging APVar saves 2011-11-19 16:59:54 -08:00
Jason Short 90bc03ef99 new DataLog message 2011-11-19 16:59:54 -08:00
Jason Short 56179a24e1 Added Arbitrary data logging 2011-11-19 16:59:54 -08:00
Jason Short b6adfdb62f missed == 2011-11-19 14:42:57 -08:00
Jason Short eef04a5a54 removed some tests 2011-11-19 14:02:00 -08:00
Jason Short 8e1f311c36 s 
shortened strings, logging defines updated
 2011-11-19 14:01:47 -08:00
Jason Short 8e509b63a7 shortened strings for mem 2011-11-19 14:00:55 -08:00
Jason Short d02b4342ae removed some unused code, made output min by default 2011-11-19 14:00:42 -08:00
Jason Short d1c161ecd0 Upped version 
added new logging params
added crosstrack gain
re-ordered param inits
 2011-11-19 14:00:23 -08:00
Jason Short 39d0df4cef added param for crosstrack gain defaulted to 4 2011-11-19 13:59:37 -08:00
Jason Short 9bc4328724 Added crosstrack gain and lowered alt hold rate gain 2011-11-19 13:59:15 -08:00
Jason Short e4f2ad1809 remove PI_crosstrack 2011-11-19 13:58:53 -08:00
Jason Short 579096cd2e return to prev climb rate calc 2011-11-19 13:58:41 -08:00
Jason Short 35524f6da7 Added optimizations for radian calls to remove a division. 
added a protection for entering AP modes without Home being set by GPS lock.
 2011-11-19 11:08:13 -08:00
Jason Short 791fd194a4 added logging of raw baro 2011-11-19 11:08:13 -08:00
Jason Short 802dd6994a PM restored to normal output 2011-11-17 10:37:01 -08:00
Jason Short 7ebab2a9fe Log type error fix 2011-11-17 10:27:02 -08:00
Randy Mackay c8d2341156 TradHeli - automatically reinitialise swash plate if HSV_MAN is switched from 1 to 0. 
Turn-off feed forward correction to yaw based on collect when in HIL mode.
 2011-11-17 20:43:07 +09:00
Jason Short a168691eba Working implementation of Jump Command 2011-11-16 21:28:56 -08:00
Jason Short ddd89e1849 Mission Scripting updates 2011-11-16 00:22:23 -08:00
Jason Short 833fe17c6a disabled raw GPS temp 2011-11-16 00:22:23 -08:00
Jason Short fed5c0b204 Mission Scripting updates 2011-11-16 00:22:23 -08:00
Jason Short 8392e375e1 Do not write home from GS, 
MAV_Action_Continue disabled until I find out what it does and how to do it.
 2011-11-16 00:22:23 -08:00
Jason Short 937a364dce Made RTL Altitude hold current by default 2011-11-16 00:22:23 -08:00
Jason Short 0245e73a8b Mission Scripting re-write 2011-11-16 00:22:23 -08:00
Jason Short 163345dadd Mission Scripting re-write 2011-11-16 00:22:22 -08:00
Jason Short 65fe467a57 Mission Scripting re-write 2011-11-16 00:22:22 -08:00
Jason Short 5ed931c582 Mission Scripting re-write 2011-11-16 00:22:22 -08:00
Jason Short 3eaef4081c Added better navigation flag for more accurate dtnav timing 
Added better support for climb rate in SIM
 2011-11-16 00:22:22 -08:00
Jason Short c343cee727 Fixed typo in notes about timer speed 2011-11-14 12:25:06 -08:00
Jason Short 2ad1294514 scaling width of circle mode to make it more round. 2011-11-13 23:09:42 -08:00
Jason Short 687d0eda98 fixed bad indexing for setting current mission index 2011-11-13 22:59:57 -08:00
Jason Short be1007d032 Moved updated alt to GPS so the climb rate is sane 2011-11-13 22:54:57 -08:00
Jason Short 288db5c7c5 Better error and defaults checking 2011-11-13 22:54:18 -08:00
Jason Short 349ab7e0c6 slowed Circle flight 2011-11-13 13:41:23 -08:00
Jason Short daaf681417 error checking command saving 2011-11-13 13:41:23 -08:00
Randy Mackay 2112f74324 TradHeli - reversed the direction of "phase angle" to make it more intuitive. This parameter is used to correct for a heli's tendency to lean left or right when the pilot gives it a pitch forward command. 2011-11-13 22:40:46 +09:00
Randy Mackay 70aadd4afc TradHeli - added two parameters to improve heli control. 
heli_phase_angle allows pilot roll/pitch command to be translated into mixed roll and pitch.
heli_coll_yaw_effect mixes some collective into the yaw so tail can counter act collective movements more easily.
 2011-11-13 22:20:57 +09:00
Jason Short 930ee51bbe added scale note 2011-11-13 00:25:04 -08:00
Jason Short 04491d66db Fixed scaling issue with Circle mode 2011-11-13 00:24:25 -08:00
Jason Short 7dd737ad90 Merge branch 'master' of https://code.google.com/p/ardupilot-mega 
Conflicts:
	Tools/autotest/autotest.py
 2011-11-12 21:53:08 -08:00
Jason Short bee53453d6 nav updates 2011-11-12 21:46:57 -08:00
Jason Short ea57fad80c WP counting update 2011-11-12 21:46:03 -08:00
Jason Short 901e46334d updates to Mavlink for zero based WP counting 2011-11-12 21:44:38 -08:00
Jason Short e1315b1ab8 Update and fix for Circle mode 
HIL updates for altitude
 2011-11-12 21:43:21 -08:00
Jason Short bcfb3a0ee3 Fix for WP saving with CH7 2011-11-12 21:40:58 -08:00
Jason Short d6bfae598f WIP: adding 255 to represent a completed mission 2011-11-12 21:40:33 -08:00
Jason Short fd02ebca74 Work in progress for using 0 based counting 2011-11-12 21:39:24 -08:00
Jason Short 9e67c7efca Added additional nav params to reset 2011-11-12 21:39:00 -08:00
Michael Oborne b3747ab10f fix loiter radius 2011-11-13 08:24:56 +08:00
Jason Short be3edc19f8 Fixed type error in params 2011-11-12 15:15:33 -08:00
Jason Short bb4e612241 Shortened test name 2011-11-12 15:14:32 -08:00
unknown a7038cbaf9 TradHeli - new parameter HSV_MAN to allow better set-up from APMissionPlanner. Also changed swash movement to use radio_out which fixes some setup bugs 2011-11-12 23:23:07 +09:00
Jason Short dd96b146b5 Merge branch 'master' of https://code.google.com/p/ardupilot-mega 2011-11-10 10:02:08 -08:00
Jason Short 3450e91039 Trying to break Nav to test a feature 2011-11-10 10:01:57 -08:00
Andrew Tridgell 2d204b727b fixed build error 
the prototype extractor was finding the commented out version of
cross_track_test(), which had a different prototype
 2011-11-10 22:01:09 +11:00
Jason Short 3f0b42f64f made crosstrack functions static 2011-11-09 23:30:16 -08:00
Jason Short 2c9ebf11b8 removed unused functions, log fix 2011-11-09 23:28:50 -08:00
Jason Short d8361dfe67 renamed original_target_bearing 2011-11-09 23:04:04 -08:00
Jason Short 8ad94b9993 Merge branch 'master' of https://code.google.com/p/ardupilot-mega 2011-11-09 22:56:52 -08:00
Jason Short ae1684a37c crosstrack angle variable 2011-11-09 22:56:38 -08:00
Jason Short 7259cf2180 Added in crosstrack correction - test for SIM 2011-11-09 22:56:09 -08:00
Andrew Tridgell c056c4f0cb HIL: allow for fast HIL attitude update in HIL_MODE_ATTITUDE 
this runs it at the full loop rate
 2011-11-10 13:17:06 +11:00
Jason Short 6211cc4e50 back to original config for testing 2011-11-10 13:00:34 +11:00
Jason Short 6b26c32e9d Lowered Nav_P based on SIM data 2011-11-10 13:00:34 +11:00
Jason Short fafa6e52e9 back to original config for testing 2011-11-09 13:53:26 -08:00
Jason Short f994d16a48 Lowered Nav_P based on SIM data 2011-11-09 12:46:34 -08:00
Jason Short 6e3b3fd974 CTUN log update 2011-11-09 12:28:12 -08:00
Jason Short 3732b7db71 Added code notes 2011-11-09 12:07:15 -08:00
Jason Short 630f2dbf05 Code formatting 2011-11-09 12:06:55 -08:00
Jason Short d6c0e34516 Tuning nav_WP 
Added more notes
 2011-11-09 12:06:37 -08:00
Jason Short a8d622d8e6 Lowered Nav_P I term to ramp slower base on SIM 2011-11-09 11:30:50 -08:00
Jason Short 27d9bc92f3 Added more output to Mavlink for debugging 2011-11-09 11:00:40 -08:00
Jason Short e5b37d9d89 Added MAV_CMD YAW parsing 2011-11-08 23:44:14 -08:00
Jason Short 7714f203f9 Added Mav_CMD_Yaw parsing 2011-11-08 23:42:41 -08:00
Andrew Tridgell c158cb8e63 call gcs_update() while waiting for GPS lock 
this ensures we react to ground commands, and also allows HIL GPS to
work
 2011-11-09 17:43:55 +11:00
Jason Short 79e30b5f21 removed debugging code 2011-11-08 14:41:46 -08:00
Jason Short d375de8424 SIM test 2011-11-08 14:11:02 -08:00
Jason Short b29f4456c4 fix for SIM GPS 2011-11-08 14:10:09 -08:00
Andrew Tridgell 3b67321945 Log: try to fix -ve lat in logging 2011-11-09 08:46:05 +11:00
Jason Short 2dc2a2114a restoring throttle i term for SIM 2011-11-08 11:51:49 -08:00
Jason Short 90ee0f7e09 bad hijacking of GPS_Status 2011-11-08 10:48:47 -08:00
Jason Short 1ab1d8bab4 Fixes for Sim - Missing climb rate calculation 2011-11-08 10:46:52 -08:00
Jason Short 10bbfdbe11 PID test for alt hold to narrow down on a bug 2011-11-08 10:13:16 -08:00
Jason Short c3d5d92a71 Updated Logs to be C++ compliant 2011-11-07 22:23:48 -08:00
Jason Short 69fec433e6 Update to RTL logic. 2011-11-07 21:30:12 -08:00
Jason Short 4afc3e9f17 Fix for bad RTL tracking in Autopilot 2011-11-07 21:09:29 -08:00
Andrew Tridgell dc6fb484cd Log: fixed a few more casts 2011-11-08 11:59:30 +11:00
Andrew Tridgell 28634f51b7 ArduCopter: use specific sized data types in a lot of places 
this will make the Desktop build more consistent with the real AVR
build, and also with a future ARM build
 2011-11-08 11:05:36 +11:00
Jason Short 6bf0c32173 Removed some old debug prints from motors.pde 
added ability to not increment I term for traversals.
 2011-11-07 14:32:39 -08:00
Andrew Tridgell 3176d4ffc5 HIL: enable CTUN log message in ATTITUDE HIL 2011-11-08 07:58:35 +11:00
Andrew Tridgell 92471aead2 Log: better way to check for -1 long portably 2011-11-08 07:58:34 +11:00
Jason Short 0446cae242 Alt hold fix 2011-11-07 12:00:37 -08:00
Andrew Tridgell 2bd451b445 Log: make find_last_log_page() portable 
this makes it work with platforms with a larger 'long'
 2011-11-07 23:50:49 +11:00
Andrew Tridgell ae1e1c940f Log: fixed a bug where we could index outside an array 
when we first start up, num_existing_logs may be zero
 2011-11-07 22:56:13 +11:00
Jason Short 3a37e7fe60 Merge branch 'master' of https://code.google.com/p/ardupilot-mega 2011-11-06 22:46:57 -08:00
Jason Short a37fadbedb moved to 200hz update 
Zccel Z updates from Aurelio in attitude.pde
lowered baro_alt sanity check
moved user hooks to the medium 10hz loop.
 2011-11-06 22:46:39 -08:00
Jason Short d1431f1070 default top_bottom ratio 1.0 2011-11-06 22:45:07 -08:00
Jason Short 3153257d37 default top_bottom ratio 1.0 2011-11-06 22:43:49 -08:00
Jason Short 4bb0bf96ae Y6 Motors now have top bottom ratio 2011-11-06 22:42:59 -08:00
unknown 9c59fdfdd6 AltHold - another correction to the manual boost. Hopefully properly transferring building up I terms to g.throttle_cruise 2011-11-06 19:06:13 +08:00
unknown 32057fb3c9 AltHold - made TradHeli code also use manual_boost 2011-11-06 18:25:13 +08:00
unknown 755cb4b201 Altitude hold bug fix - changed g.throttle_cruise to be updated to steal I term from correct controller 2011-11-06 17:47:24 +08:00
unknown 156b496bab TradHeli - small change to make throttle_cruise in terms of radio input instead of servo output 2011-11-06 17:40:17 +08:00
unknown f1e626e3c1 TradHeli - changed deadzones for throttle to zero (and also reduced for yaw) 2011-11-06 17:37:59 +08:00
Jason Short c265555b69 Merge branch 'master' of https://code.google.com/p/ardupilot-mega 2011-11-04 21:42:10 -07:00
Jason Short c8304114a3 renamed some command variables to align with Arduplane 
reworked the arming code and moved the DCM gains out.
updated climb_rate to include sonar data.
 2011-11-04 21:41:51 -07:00
unknown 12f5f3f96e TradHeli - fix to allow tail servo to be reversed. Also increase max movement of tail servo to 45 degrees. 2011-11-05 12:31:30 +08:00
Jason Short 3f211121fe Merge branch 'master' of https://code.google.com/p/ardupilot-mega 2011-11-01 21:18:56 -07:00
Jason Short 27fc6eea10 Z dampener 
Integrated Aurelio R. Ramos' Z dampening code.
 2011-11-01 21:18:47 -07:00
Andrew Tridgell acc03753ab fixed HIL build 2011-11-02 08:14:07 +11:00
Jason Short 4f8ef25643 Merge branch 'master' of https://code.google.com/p/ardupilot-mega 2011-11-01 09:30:54 -07:00
Jason Short 1df9f8488d updated Alt hold PIDs 2011-11-01 09:30:34 -07:00
Jason Short 0a538baeb2 updated baro test 2011-11-01 09:29:55 -07:00
Jason Short c32a707632 cleanup 2011-11-01 09:28:36 -07:00
Jason Short c402311077 removed accel.z references 2011-11-01 09:28:23 -07:00
Jason Short c6ed8ed0ea alt hold logging 2011-11-01 09:28:04 -07:00
Jason Short fd9b16e787 resetting alt hold I 2011-11-01 09:27:49 -07:00
Jason Short 48db60a4eb Tweaks to alt hold 2011-11-01 09:25:23 -07:00
Jason Short ab1de277dc altered the interactive throttle to be more aggressive and proportional. 
reworked baro reading strategy.
 2011-11-01 09:24:51 -07:00
Andrew Tridgell 56390c4696 GCS: fixed timeout loading waypoints (ArduCopter) 
prevents link saturation
 2011-10-31 21:25:58 +11:00
James Goppert 3f8603331d Switching to new eclipse project style. 2011-10-30 22:57:34 -04:00
James Goppert 8102b31d8d Merge branch 'master' of https://code.google.com/p/ardupilot-mega 2011-10-29 15:09:35 -04:00
James Goppert 1a8c4a2597 Working on cmake support. 2011-10-29 15:01:05 -04:00
Jason Short 67e98ae867 Added additional NTUN logging entries. 2011-10-29 11:53:50 -07:00
unknown c253996ea9 TradHeli - added TUNE value 13 to allow adjusting of external gyro gain using channel 6 2011-10-29 20:34:21 +09:00
unknown ea66c74ff0 TradHeli - added throttle scaling and heli specific angle_boost function that takes into account that heli's main blades can have -ve pitch. 2011-10-29 17:27:43 +09:00
Jason Short 1238944573 logging type change in CTUN 2011-10-28 21:59:47 -07:00
Jason Short 842311dfcd Added save WP note to APM_Config.h 2011-10-28 21:46:31 -07:00
Jason Short 7266c5372a Merge branch 'master' of https://code.google.com/p/ardupilot-mega 2011-10-28 21:29:18 -07:00
Jason Short 07daf34ccc Added a slew rate to the alt change rate. 
Added better reporting of throttle control
upped constraints for alt hold
Additional logging for CTUN lay hold
 2011-10-28 21:29:10 -07:00
Andrew Tridgell 1118d26f03 fixed "Free RAM" display on bootup 2011-10-28 21:34:10 +11:00
Jason Short 46590e5f28 Log updates 
Added motor logging for different frame types. Switched the PM log to some new debugging values and speed up the writing of the value to the logs.
 2011-10-27 22:36:25 -07:00
Jason Short 04b5776601 50 rev 
Work in progress, revved the EEPROM
 2011-10-27 12:42:28 -07:00
Jason Short 27d9712e80 Merge branch 'master' of https://code.google.com/p/ardupilot-mega 
Conflicts:
	libraries/APM_PI/APM_PI.cpp
 2011-10-27 12:41:00 -07:00
Jason Short 2458fe078f Loiter updates 
Added new option to do rate based Loiter with lat and long values, avoiding GPS heading latency issues.
 2011-10-27 12:37:33 -07:00
Jason Short d089059f58 Set default gain to 20 2011-10-27 12:33:44 -07:00
Jason Short c8c26d8193 added boost scalar arguments 
removed accel math from Trig function into Attitude.pde
 2011-10-27 12:33:19 -07:00
Jason Short c6c7966205 Attitude 
Made the Acro mode more NG like. Should be much more nimble!
Tweaked the Accel hold with sim tests. not flight tested or enabled by default.
added option to set scalar in angle boost
 2011-10-27 12:31:46 -07:00
Jason Short 0b4a3ccadb Acro PI defaults 2011-10-27 11:55:13 -07:00
Jason Short dd23883097 Motor arming delays 
Speeding up delays for motor arming commands - Level and Inflight leveling.
 2011-10-27 11:54:46 -07:00
Jason Short a076b45506 Added Acro Params 
Allows user's to fly separate PI loops settings for Acro
 2011-10-27 11:52:00 -07:00
Jason Short d4e5281a4c Deafaut dead_zone call 
Sets the correct default values for the RC_Channel group for Quads.
 2011-10-27 11:35:02 -07:00
Jason Short 76bf784f8c RC_Channel Dead zone 
Added APVar dead_zone to the RC_Channel library so you could edit it in the Mission planner
Made CH filtering off by default.
 2011-10-27 11:34:00 -07:00
Andrew Tridgell 5a44298d57 CLI: enable "hit enter 3 times" support for CLI 
if you hit enter 3 times before you send any mavlink packets, we will
enter CLI mode
 2011-10-27 21:54:07 +11:00
Jani Hirvinen a503d9a7a7 adding missing config parameters 2011-10-21 10:41:52 +07:00
Jani Hirvinen f5f3fa8fb9 Adding second default PID sets for bigger motors 2011-10-21 10:38:36 +07:00
Jason Short d551494b94 Added ability to dynamically set wp with toggle switch 2011-10-18 17:59:45 -07:00
Jason Short a693bea7d9 added extra user hook 2011-10-17 23:51:47 -07:00
Jason Short 42d0b5cdb3 tweaked Alt hold PIDs, loiter PIDs based on SIM testing and feedback. 
Increased distance error for loiter for faster return to center.
 2011-10-16 15:41:54 -07:00
Jason Short 3bf36b5427 fix for Camera Roll 2011-10-15 20:45:45 -07:00
Jason Short 2f751793bc typoo in params for camera roll gain. fixed. 2011-10-15 18:34:23 -07:00
Jason Short 4c1d10a75e Merge branch 'master' of https://code.google.com/p/ardupilot-mega 2011-10-15 16:35:09 -07:00
Jason Short 6a5aefd0ec Added gains to adjust travel of camera. 2011-10-15 16:34:57 -07:00
Michael Oborne 5c10b2af6c ac quick redo fix 2011-10-16 06:58:03 +08:00
Jason Short 4052fd4f73 Made wpspeed governor run per second so 1hz gps doesn't fail. Gave a 1m/s minimum. Increased WPspeed max to 4.0m/s 2011-10-15 15:35:18 -07:00
Jason Short 4be2776b17 Added Andrew's user hooks. 2011-10-15 15:29:33 -07:00
Jason Short 142707711e Updates to guided mode from Michael O. 
removed or commented unused static vars
 2011-10-15 13:09:04 -07:00
Jason Short 65f26f7138 Merge branch 'master' of https://code.google.com/p/ardupilot-mega 2011-10-13 10:55:17 -07:00
Jason Short 338396b76a slowed acceleration from WP 2011-10-13 10:54:51 -07:00
Michael Oborne e85e3b87a8 AC2 fix guide mode fly off 2011-10-13 18:34:32 +08:00
Jason Short 2330006fbe logging for gyro and accell testing 2011-10-12 21:21:46 -07:00
Jason Short 9500171a46 tweak to the Loiter N turns 2011-10-12 20:59:12 -07:00
Jason Short 43b3015963 lowered DCM RP gains 
made Instant_PWM optional
upped PWM output to 400hz
 2011-10-11 22:20:23 -07:00
Amilcar Lucas 04299122d8 Spell 2011-10-11 22:52:02 +02:00
Andrew Tridgell d11303ef78 removed an unused variable 2011-10-11 20:53:43 +11:00
Andrew Tridgell 97b3ced7aa fixed a signed/unsigned warning 2011-10-11 20:53:43 +11:00
Andrew Tridgell eed26ae91a fixed a '=' vs '==' bug in do_loiter_turns() 2011-10-11 20:53:43 +11:00
Andrew Tridgell d89ae696ef merged the GCS updates from ArduPlane to ArduCopter 
this removes all the non-MAVLink GCS options, and simplifies the HIL
and GCS code a lot. It also adds async sending of low priority GCS
text messages.
 2011-10-11 20:53:43 +11:00
Andrew Tridgell ea82b27fe5 support building with common Makefile.desktop 2011-10-11 17:49:40 +11:00
Andrew Tridgell 0939b51a4c added build makefiles 2011-10-10 07:18:38 +11:00
Andrew Tridgell 5a71030d76 don't check the slider switch if CLI is disabled 
this prevents a build error in desktop mode
 2011-10-09 22:39:23 +11:00
Andrew Tridgell c61fe55d76 don't initialise DataFlash if logging is disabled 2011-10-09 22:38:49 +11:00
Andrew Tridgell 01e5ae2ab9 use memcheck_available_memory() instead of freeRAM() 
this provides a more accurate view of memory
 2011-10-09 22:38:14 +11:00
Michael Oborne d42f2e230e undo config change 2011-10-08 21:13:53 +08:00
Michael Oborne a052c25899 Merge commit 'e7f5e4a623b79872a015dff5ca959e60f6f7fd64' 2011-10-08 20:43:13 +08:00
Jason Short c25478448b Quick RTL Fix, logic was backward 2011-10-07 11:06:31 -07:00
Jason Short 167df79b49 Better Loiter PIDs 
Fixed RTL overshoot bug
 2011-10-06 17:42:09 -07:00
Michael Oborne fab2121c6d fix ac2 hil build 2011-10-04 18:55:10 +08:00
Michael Oborne f9883bf382 fix make issue 2011-10-04 09:34:47 +08:00
Jason Short 1ff372a41d Implementing a limiter for the ramp up of speed to WPs. 2011-10-03 10:37:56 -07:00
Jason Short eb1117b136 Merge branch 'master' of https://code.google.com/p/ardupilot-mega 2011-10-02 11:36:31 -07:00
Jason Short b0bd9d1c44 Added second PI loop for alt hold. 
Upped gains for default JDrones Frame
added gains for second PI loop for alt
removed some tests for 1280 space constraints
 2011-10-02 11:36:23 -07:00
Amilcar Lucas ee4251baef Fix compilation 2011-10-02 14:52:02 +02:00
Amilcar Lucas 3d1902abac Use the new AP_Relay library 2011-10-02 14:22:27 +02:00
Jason Short 189fc194b6 Merge branch 'master' of https://code.google.com/p/ardupilot-mega 2011-09-30 18:40:40 -07:00
Jason Short f89da12387 Minimized the accel_filtered vector to be faster and more accurate. 
Made the Filter include the Accels and moved from 8 to 4 terms in the filter
 2011-09-30 18:40:29 -07:00
James Goppert e20c279ca5 Added makefiles for ArduCopter/ArduPlane. 
These files are not generated by cmake. They are necessary for
the make based build to work. To build using this method
type make in the directoy such as ArudPlane/ArduCopter. Make
sure that you do not call cmake in the ArduPlane etc directory
as this will overwrite this Makefile with the autogenerated cmake
version. Cmake should be called from withing a build directory.
 2011-09-30 07:16:48 -04:00
Janne M b4e56e889f ArduCopter: Fixed board setting in cmake-file. Removed now autogenerated Makefile 2011-09-30 11:30:43 +03:00
Jason Short 12cd4539a3 2.0.46 preliminary release 2011-09-29 23:30:32 -07:00
Jason Short a7ea200407 Merge branch 'master' of https://code.google.com/p/ardupilot-mega 2011-09-29 23:27:36 -07:00
Jason Short de61e87128 Added ADC gyro Filtering for quads - this fixes a noise issue introduced into the controller 
added Position mode
removed
Added back in the accelerometer experiment
Added filter_result boolean to enable filter on the fly
 2011-09-29 23:27:23 -07:00
James Goppert 5489b84f8e Improvements to cmake. 2011-09-29 21:23:26 -04:00
James Goppert dafaa1fa0b Merge branch 'apo' 
Conflicts:
	ArduBoat/ArduBoat.pde
	ArduBoat/CMakeLists.txt
	ArduRover/ArduRover.pde
	ArduRover/CMakeLists.txt
	apo/CMakeLists.txt
	apo/apo.pde
 2011-09-29 14:22:55 -04:00
James Goppert d887a28b91 Added ArduBoat/ ArduRover/ and APO library. 2011-09-29 14:12:15 -04:00
Jason Short 758d0e1aec Attempting to mimic loiter values for 4.0.42 
lowered Rate Error max in loiter
 2011-09-28 23:11:19 -07:00
Jason Short c881600385 lowered the deadzone a tad 2011-09-27 13:56:02 -07:00
Jason Short 888e1119e8 Added Loiter P tuning as #12 2011-09-27 09:39:32 -07:00
Jason Short c209d6e6dd 2.0.46 -Not flight tested! 
restored 42 alt hold code
removed throttle timer, replaced with safer constant
increased alt control range
reformatted nav_rate calls
removed unused simple mode defines
set alt hold home to 10m
tuned down rateP to .13 from .14 for broader application.
 2011-09-27 09:35:05 -07:00
Jason Short 326cfef808 Dead Zone fix - Now the range is full instead of clipped. Should make the Yaw much more smooth. 2011-09-26 22:12:39 -07:00
Michael Oborne d8fd3eadfd heli config 2011-09-27 07:36:12 +08:00
Michael Oborne b33eaa8c9c heli hil config 2011-09-27 07:34:32 +08:00
Michael Oborne 108a89f617 heli hil 2011-09-27 07:30:28 +08:00
Jason Short 0ed9af1bf5 Turned off Rate_I for Arduino users. 2011-09-25 15:34:59 -07:00
Jason Short b2a2221474 Fixed issue with Simple mode changes. 
Reverted to simpler, safer timer code for throttle hold
 2011-09-25 14:16:35 -07:00
Jason Short f437e4b2d1 Revved the firmware to force resetting the EERPOM 2011-09-25 12:24:02 -07:00
Jason Short 706211b757 Merge branch 'master' of https://code.google.com/p/ardupilot-mega 2011-09-25 12:22:07 -07:00
Jason Short 239164fa19 Fixed Flip code to compile. Flip still not flight tested! 2011-09-25 12:21:54 -07:00
rmackay9 bd79e1f73c Merge remote-tracking branch 'origin/master' 2011-09-25 16:55:52 +09:00
rmackay9 b5ea05698e TradHeli - added servo averaging to allow support of analog servos 
- moved heli parameters to 80 because they were causing flight modes to overlap with waypoints
 2011-09-25 16:51:25 +09:00
Jason Short bb8f97ec0b Better throttle boost value 2011-09-24 21:55:54 -07:00
Jason Short d262fdb264 Merge branch 'master' of https://code.google.com/p/ardupilot-mega 2011-09-24 21:50:08 -07:00
Jason Short d495e6a9c4 turned off Stabilize_I by default because it was hurting loiter 
tweaked speed control of rate_nav
 2011-09-24 21:49:45 -07:00
rmackay9 ddb4de1949 TradHeli - fix to set motor_auto_armed = true if throttle > 0. Required to let ALT_HOLD work! 2011-09-25 12:30:37 +09:00
Jason Short 236f665378 Added Loiter Turns - It orbits the Current location 
Added WP to Loiter_time so you can spec a specific location in the planner
added new Navigation alg. Should perform better (doesn't rely on 45° flow fields like last one)
Added "Jump" counter so missions don't get overwritten in flight.
removed I term by default for Rate pitch and roll
 2011-09-24 17:40:29 -07:00
Jason Short 35c30e91bf Test for new nav function 2011-09-24 16:48:04 -07:00
Jason Short e961d3f3d4 Removed default Rate_I for pitch and roll 
added change speed control for missions
 2011-09-24 09:49:11 -07:00
Amilcar Lucas e5c248e2bf Moved mavlink_check_target() to the libraries/. 
This allows it to be reused by the other libraries and by other projects ArduPlane, ArduCopter, ArduRover ... etc.
It also reduces code duplication
 2011-09-24 14:40:07 +02:00
Jason Short a8befb189c Fixed throttle_boost 2011-09-23 15:34:18 -07:00
Jason Short 2ae163ef75 Trying to make Alt hold more aggressively change altitudes. 2011-09-23 13:58:39 -07:00
Jason Short ba7abd62d8 Adjusted DCM Gains to normal levels. Added a check to stop navigating when landing and to land faster. 2011-09-23 13:52:10 -07:00
Jason Short 25b0a3c43b Added a default, but low throttle cruise value 
Added a clear integrator for Rate I to prevent tip ups at launch.
 2011-09-22 23:10:55 -07:00
Jason Short 7177bcec77 removed old CH6 tuning defines 2011-09-22 18:51:41 -07:00
Jason Short cfd2c31fb2 Better Tuning for default Quad 2011-09-22 18:30:29 -07:00
Jason Short 991279851a Refined Throttle Timer reset 
Reduced Loiter I gain to decrease overshoot.
 2011-09-22 17:38:39 -07:00
Jason Short f49621bde1 Fixed for sticky RTL CH7 option 2011-09-22 15:25:07 -07:00
Jason Short 078f64e276 Fixed Throttle integrator bug. Time was not being reset causing a big drop in throttle control. 2011-09-22 12:28:46 -07:00
Jason Short a012e7981a removed debug statements 2011-09-21 22:34:27 -07:00
Jason Short c91ad14e18 Fixed Timer overflow for throttle PI loop. 
Moved look at home to update_nav where it belongs
 2011-09-21 22:31:12 -07:00
Jason Short 0fba3e6742 Added Auto_trim to CH7 option 2011-09-21 16:24:09 -07:00
Jason Short 5ca50f1f01 Altered CIRCLE mode to allow Loiter_N_Turns to work in AP mode. 2011-09-21 13:19:36 -07:00
Jason Short 2a6d2dea5c upped to 2.0.44 - not flight tested 2011-09-20 23:23:42 -07:00
Jason Short 00fe8e0450 Fixed do_flip, 2011-09-20 23:20:33 -07:00
Jason Short 94313ea88f Fixed Yaw for Auto mode. 2011-09-20 22:59:23 -07:00
Jason Short c143e08d2e Logic fix for RTL option 2011-09-20 10:39:39 -07:00
Jason Short 020062498b Edited CH7 options to include Do Nothing and RTL. 2011-09-20 10:37:50 -07:00
Jason Short b2b28cc90c Converted Millis to Micros 
added navigation check to return a failed navigation
 2011-09-19 22:24:57 -07:00
Jason Short bf94ba551e changed PI Library to take Float for DeltaTime 
Changed timing to be more accurate in main loop. Still need to switch to micros(). Left that for Tridge. This gets rid of six floating point calcs *250. Nice!
 2011-09-19 14:02:42 -07:00
Jason Short 6dd2cc058a removed outdated reference file. 2011-09-18 17:18:35 -07:00
Jason Short b9b5c57662 added contributor 2011-09-18 17:12:59 -07:00
Jason Short 73fd0084be Added Piezo Support, code from Oliver. 2011-09-18 17:12:28 -07:00
Jason Short ddc5ced162 removed saving - not needed for copters 2011-09-18 16:28:53 -07:00
Jason Short 151cae6074 Jump command was reported to have issues, updated to match APM branch. 2011-09-18 16:27:43 -07:00
Amilcar Lucas 2755748d44 Added comment, spellcheck 
This reduces the diff to the APM_Camera branch
 2011-09-18 14:57:55 +02:00
Andrew Tridgell dc23ad4275 MAVLink: merged in the stack saving changes from ArduPlane 2011-09-18 11:37:24 +10:00
Jason Short 2f961ad315 Merge branch 'master' of https://code.google.com/p/ardupilot-mega 2011-09-17 12:23:22 -07:00
Jason Short 99065d5035 Added a GPS watchdog to stop navigating if we loose signal. 2011-09-17 12:23:16 -07:00
Amilcar Lucas 1dca64f190 Merge branch 'master' of https://code.google.com/p/ardupilot-mega 2011-09-17 20:25:49 +02:00
Amilcar Lucas 227ce0a92d Merge some small misc improvements from APM_Camera branch 2011-09-17 20:25:31 +02:00
Jason Short 0b701f7351 Reverted to current_loc.alt in MSG_VFR_HUD and MSG_Location 2011-09-17 11:16:13 -07:00
rmackay9 c825e76a88 ArduCopter - small changes to fix compile errors when optical flow enabled 2011-09-17 22:09:18 +09:00
Andrew Tridgell d4a068416f fixed bit-logic for simple modes 2011-09-17 14:58:02 +10:00
Andrew Tridgell 3c69404d5b fixed build of OpticalFlow code 2011-09-17 14:58:02 +10:00
Andrew Tridgell 0425f4be54 updates for new DCM code 
G_Dt is no longer needed by the DCM
 2011-09-17 14:58:02 +10:00
Jason Short 4607bdb4b5 fixed naming for opt flow 2011-09-16 19:26:17 -07:00
Jason Short f79b8de5e8 removed DCM reference from OPT FLOW 2011-09-16 19:17:50 -07:00
Jason Short cd72e6bea9 roughed in an expo option idea 
made min and max values 1100, 1900
removed hard coded init for camera values
 2011-09-16 19:06:53 -07:00
Jason Short 1689a9857c removed unused pde file 2011-09-16 18:57:35 -07:00
Jason Short 9c5cba56eb Added low voltage code flashing code. 2011-09-16 18:56:51 -07:00
Jason Short 9bcbe70e59 Merge branch 'master' of https://code.google.com/p/ardupilot-mega 2011-09-16 18:35:14 -07:00
Jason Short b948e0f02b Lowered Loiter_I - higher value didn't test well. 2011-09-16 18:24:42 -07:00
Jason Short 129c13e065 Fixed CIRCLE mode trig error 
made loiter_radius * 100 in Params
updated gains
 2011-09-16 16:54:45 -07:00
Jason Short 8d0a2fae9b cleanup 
added more ifdef for optflow
 2011-09-15 23:41:15 -07:00
Jason Short d29cfbcee3 Integration of optical flow 
bug fixes for new Simple mode
increased Baro filter by 2 fields
 2011-09-15 23:33:00 -07:00
Michael Oborne e43b711e96 fix remote error value 2011-09-15 18:26:59 +08:00
Jason Short 1025fc3abf Merge branch 'master' of https://code.google.com/p/ardupilot-mega 2011-09-14 14:45:13 -07:00
Jason Short 1ce2308d11 Removed Simple Mode 
Added Simple option to mode switch positions
removed unused OptFlow code
added reset lat and lon error
removed unused init_auto
Fixed log formatting
Added simple mode bitmask
removed pitchmax
added CLI setup for enabling Simple mode to any switch position
 2011-09-14 13:58:18 -07:00
unknown a4e001bbcf Adding CMake support 2011-09-14 15:44:55 +02:00
Jason Short fdc56c9ad5 Merge branch 'master' of https://code.google.com/p/ardupilot-mega 2011-09-12 12:57:56 -07:00
Jason Short ecd14f4425 Cleaned up guided mode 
Reduced ADC filter to 3 from 6 to increase speed of filter.
 2011-09-12 12:57:36 -07:00
Amilcar Lucas d1a63db767 These defines got moved to the library 2011-09-12 21:32:05 +02:00
Jason Short a6182965c1 Merge branch 'master' of https://code.google.com/p/ardupilot-mega 2011-09-11 21:46:53 -07:00
Jason Short 885ec18182 Removed last of Xtrack 2011-09-11 20:40:05 -07:00
Jason Short bae05178f0 removed Xtrack and increased rate error limit 2011-09-11 20:36:20 -07:00
Jason Short 285029856b removed nav_bearing 2011-09-11 20:33:29 -07:00
Jason Short 5f94aa1d40 removed Nav_bearing 2011-09-11 20:32:58 -07:00
Jason Short c15b6be83f increased imax 2011-09-11 20:28:43 -07:00
Jason Short 466488e78d removed nav_bearing - not used 2011-09-11 20:27:56 -07:00
Olivier ADLER b9383537e2 Added missing motor tests for octa quad and octa V 2011-09-12 00:43:54 +02:00
Olivier ADLER 1ee65e3ef2 Merge branch 'APM_Camera' of https://code.google.com/p/ardupilot-mega/ 
Conflicts:
	ArduPlane/ArduPlane.pde
	libraries/AP_Camera/AP_Camera.h
	libraries/AP_Mount/AP_Mount.cpp
	libraries/AP_Mount/AP_Mount.h
 2011-09-12 00:31:18 +02:00
Olivier ADLER 8b3e9d2df6 Signed-off-by: Olivier ADLER <contact2@nerim.net> 
slightly upped motor out values for motor test. Was too low for some ESCs.
 2011-09-11 23:32:04 +02:00
Jason Short d733868fea Fixed Yaw mode for CIRCLE 2011-09-11 11:48:11 -07:00
Jason Short e6b7c57d26 Circle Mode now working 
250Hz loop implemented
 2011-09-11 11:22:01 -07:00
Jason Short 482844b87a Added Input Voltage value to params 2011-09-10 18:44:56 -07:00
Jason Short b4a51806bc Added Nav Rate tuning 2011-09-10 18:37:28 -07:00
Jason Short bb1b7b47a7 Fixed numbering issue with defines 2011-09-10 16:25:52 -07:00
Jason Short 97d69906dd Incremented to 2.0.41 2011-09-10 15:28:55 -07:00
Jason Short 02bfd43390 Fixes Alt hold mistake 
Moves tuning into runtime definable param
Added more IMax to throttle

Signed-off-by: Jason Short <jasonshort@gmail.com>
 2011-09-10 15:16:51 -07:00
Chris Anderson 59b5bafdd1 Renamed code to ArduCopter 2011-09-08 19:14:12 -07:00
jasonshort 8870e2f309 circle mode patch 2011-09-09 11:59:42 +10:00
Andrew Tridgell ec398505a6 rename main pde file for arduino requirements 2011-09-09 11:52:25 +10:00
Andrew Tridgell b9fad1262a move Frame into ArduCopter 2011-09-09 11:52:15 +10:00
Andrew Tridgell d95e454609 rename main pde file for arduino requirements 2011-09-09 11:51:21 +10:00
Andrew Tridgell afe0fa18ea move Frame into ArduCopter 2011-09-09 11:49:11 +10:00
Andrew Tridgell 1456a2a912 renamed top level directories 
ArduCopterMega -> ArduCopter
added archives directory for old code
 2011-09-09 11:27:41 +10:00