Mirror/ardupilot
5
0
Fork 0
mirror of https://github.com/ArduPilot/ardupilot synced 2025-01-11 02:18:29 -04:00
Code Issues Packages Projects Releases Wiki Activity
8,905 Commits 71 Branches 511 Tags 786 MiB
7413c15959
Commit Graph

2393 Commits

Author SHA1 Message Date
rmackay9
396024e802 ArduCopter: move scaleLongUp and scaleLongDown initialisation to init_home 2013-01-02 09:19:17 +11:00
rmackay9
7a5e4b8549 ArduCopter: stop unnecessary updates of target altitude and knock-on effect of too many EV message in dataflash log 2013-01-02 09:19:17 +11:00
rmackay9
1b5ff6aac6 ArduCopter: restore initial climb to RTL 2013-01-02 09:19:17 +11:00
rmackay9
52802cb29e ArduCopter: limit output throttle to 800 only for TRI which does not have the new stability patch 2013-01-02 09:19:17 +11:00
rmackay9
34e18ae12a ArduCopter: increase accel based throttle PIDs and add D term to rate based throttle 2013-01-02 09:19:17 +11:00
rmackay9
ac8af9a53f ArduCopter: Leonard Hall's changes to alt hold including adding low pass filter to climb rate 
get_throttle_rate_stabilized changed to simply update the target altitude instead of talking directly to the rate controller.
get_throttle_althold changed to use sqrt of distance when calculating the desired rate towards the target altitude.
added reset of accel based throttle PID's I term.
unrelated small bug fix from Randy to allow CH6 tuning of throttle rate D term.
 2013-01-02 09:19:17 +11:00
rmackay9
f4c50353b9 ArduCopter: allow tuning of the Throttle Rate D term 2013-01-02 09:16:48 +11:00
Robert Lefebvre
9605bd8ee1 ACM: Trying to set a default MPU6K filter rate of 10Hz for TradHeli. Doesn't Work. 2013-01-02 09:14:55 +11:00
rmackay9
d926360e81 ArduCopter: move gcs updates to run only when there are 4ms of spare time before the next 100hz iteration starts 2013-01-02 09:14:31 +11:00
rmackay9
881dae1e27 ArduCopter: remove throttle limit of 800 for quads, hexas and octacopters 
Note: Y6 and OctaQuads still have the 800 limit because they do not have the latest stability patch
 2013-01-02 09:13:42 +11:00
rmackay9
6da68c53a5 ArduCopter: bug fix so AP_Limits does not use up memory if it is disabled 2013-01-02 09:13:42 +11:00
rmackay9
d8e3d5c10c ArduCopter: allow RTL's yaw mode to be overridden with a #define in APM_Config.h 2013-01-02 09:12:40 +11:00
rmackay9
5633164fa0 ArduCopter: bug fix for compass.accumulate check in main loop (millis vs micros issue) 2013-01-02 09:12:40 +11:00
rmackay9
50d46898fb ArduCopter: allow GUIDED mode roll-pitch, yaw and throttle control modes to be overridden 2013-01-02 09:12:17 +11:00
rmackay9
ddc578fd18 ArduCopter: restore YAW to default AUTO_YAW mode instead of YAW_LOOK_AT_NEXT_WP mode 2013-01-02 09:12:17 +11:00
rmackay9
0ab82f8c4e ArduCopter: clear ahrs roll and pitch trims after an accel level command 2013-01-02 09:12:17 +11:00
rmackay9
7ea34d4fb7 ArduCopter: updated accel based throttle to use ahrs's get_accel_ef method 
Also removed slow low pass filter meant to correct for accelerometer calibration.  This is no longer required now that we have the improved calibration method.
 2013-01-02 09:11:25 +11:00
rmackay9
4dfe3a2d73 ArduCopter: remove weird character from navigation.pde 2013-01-02 09:11:25 +11:00
Robert Lefebvre
ab95f04a91 ACM: TradHeli 
Change name of attitude rate feed-forward parameters.
 2013-01-02 09:10:40 +11:00
rmackay9
8e032b89ee ArduCopter: create 2.9 branch and update firmware version 2013-01-02 09:10:40 +11:00
Andrew Tridgell
cf8e648558 CLI: fixed accel setup 
disable mavlink callback in CLI
 2012-12-24 08:51:33 +11:00
Andrew Tridgell
9931009db2 Math: use pythagorous2() in some more places 2012-12-20 15:16:18 +11:00
Andrew Tridgell
78d98023f4 Copter: remove use of 'byte' 2012-12-20 14:58:07 +11:00
Pat Hickey
1878290510 ArduCopter: fixes for AP_InertialSenor_UserInteract 2012-12-20 14:53:23 +11:00
Andrew Tridgell
3c0440b0b4 Math: use common degrees() and radians() functions 2012-12-20 14:53:22 +11:00
Andrew Tridgell
06357c40f2 Copter: use new functions 2012-12-20 14:53:22 +11:00
Pat Hickey
2ad4fed8cd Rover/Copter/Plane: change from vsnprintf to vsnprintf_P 2012-12-20 14:52:38 +11:00
Pat Hickey
54b98c0a7c ArduPlane: use hal's vsnprintf 2012-12-20 14:52:37 +11:00
Andrew Tridgell
a02f723f3a Copter: fixed HIL builds 2012-12-20 14:52:37 +11:00
Andrew Tridgell
2e8e84ba8b Copter: switch to using targets.mk 2012-12-20 14:52:36 +11:00
Pat Hickey
eb530b86e8 move Arduino.mk to /mk/Arduino.mk 2012-12-20 14:52:35 +11:00
Andrew Tridgell
9e986801c9 Copter: fixed SITL for ArduCopter 2012-12-20 14:52:34 +11:00
Andrew Tridgell
08b1c2d590 Copter: fixed GPS init 2012-12-20 14:52:33 +11:00
Pat Hickey
9a28ed2df6 ArduCopter: refactor Makefile targets in terms of Arduino.mk targets 2012-12-20 14:52:31 +11:00
Andrew Tridgell
7d27e420ae AP_HAL: remove unnecessary Arduino.h includes 2012-12-20 14:52:30 +11:00
Pat Hickey
22ac39a4ef ArduCopter: disable and remove InertialNav defines from APM_Config 
* We're not going to have the RAM available to support those in general release
 2012-12-20 14:52:29 +11:00
Pat Hickey
d5d97be837 ArduCopter: add param loader properly implement parameters 
* thanks tridge!
 2012-12-20 14:52:29 +11:00
Pat Hickey
5e63491994 ArduCopter: fix issues with HAL/HIL mixup and baro/compass instances 2012-12-20 14:52:29 +11:00
Pat Hickey
21d0da84a6 ArduCopter: temporarily disable AP_Param::setup_sketch_results 
* rebased away tridge's AP_Param changes as they seemed possibly buggy?
 2012-12-20 14:52:29 +11:00
Pat Hickey
a0151aa66c ArduCopter: fix cliSerial null ptr, do AP_Param::setup_sketch_defaults 
* plus make SITL DataFlash available.
 2012-12-20 14:52:29 +11:00
Pat Hickey
1e48d0fc69 Makefile Targets rewritten to use per-target extension style 2012-12-20 14:52:29 +11:00
Pat Hickey
524e52f449 ArduCopter: changed makefile to inherit environments properly 2012-12-20 14:52:29 +11:00
Pat Hickey
d93d932831 ArduCopter: defines fixes 
Conflicts:

	libraries/AP_Common/Arduino.mk
 2012-12-20 14:52:28 +11:00
Pat Hickey
2aa4657315 ArduCopter: changes to use CONFIG_HIL_BOARD 2012-12-20 14:52:28 +11:00
Pat Hickey
ade7099d75 ArduCopter: add AP_HAL_MAIN 2012-12-20 14:52:28 +11:00
Pat Hickey
5bd7046a95 ArduCopter: sketch cpp builds! 2012-12-20 14:52:28 +11:00
Pat Hickey
8b49208771 ArduCopter: some fixes 2012-12-20 14:52:28 +11:00
Pat Hickey
13c044ab3e ArduCopter: fixes to radio.pde 2012-12-20 14:52:28 +11:00
Pat Hickey
7af03127f6 ArduCopter: more work 2012-12-20 14:52:28 +11:00
Pat Hickey
b90889dd11 ArduCopter: add ArduPlane's compat.h & compat.pde 2012-12-20 14:52:28 +11:00
Pat Hickey
70f4739522 ArduCopter: more fixes 2012-12-20 14:52:28 +11:00
Pat Hickey
4b84e99f85 remove dumb user hooks comments 2012-12-20 14:52:28 +11:00
Pat Hickey
901c692ee3 arducopter: type fix 2012-12-20 14:52:28 +11:00
Pat Hickey
f281d9265e ArduCopter: reworked sonar analog source creation 2012-12-20 14:52:28 +11:00
Pat Hickey
d9e0bbbbab ArduCopter: first pass at AP_HAL porting 
* changed all the byte types to uint8_t
* fixed up much of the serial stuff
 2012-12-20 14:52:27 +11:00
Pat Hickey
b7a7eceef8 ArduCopter: add nocore.inoflag and Arduino.h 2012-12-20 14:51:40 +11:00
Pat Hickey
ada10f6eb2 ArduCopter: change comment references to AP_Var to AP_Param 
* jsut to clean up the grep for "AP_Var"
 2012-12-20 14:51:31 +11:00
Pat Hickey
a4f1f6a5db AP_Progmem: fix dependencies for all sketches touched by AP_HAL_AVR 2012-12-20 14:51:28 +11:00
Pat Hickey
3f1d9d7f69 AP_Param: #include <AP_Param.h> fixups for libraries & sketches 
* I mostly went through with grep and added an #include <AP_Param.h> below
  every #include <AP_Common.h>. Not all of these example sketches might
  strictly need AP_Param.
 2012-12-20 14:51:19 +11:00
Jason Short
0419dc8dfd ACM: Simplified control mode code 2012-12-14 13:30:48 -08:00
Jason Short
19ae5c30eb ACM : Formatting 2012-12-13 20:12:39 -08:00
rmackay9
52177c63f7 ArduCopter: only attempt to change settings of optical flow sensor if it has been successfully initialised 2012-12-11 00:14:29 +09:00
rmackay9
af77425636 ArduCopter: fix Failed to Init Optflow message at startup 2012-12-11 00:09:45 +09:00
rmackay9
2f748f8382 ArduCopter: renamed BATT_FAILSAFE to FS_BATT_ENABLE 2012-12-10 23:47:14 +09:00
rmackay9
d31efebd44 ArduCopter: rename throttle failsafe parameters. 
Switch to LAND flight mode if throttle failsafe triggers and we do not have a GPS.
THR_FAILSAFE renamed to FS_THR_ENABLE.
THR_FS_VALUE renamed to FS_THR_VALUE.
THR_FS_ACTION removed (action is now controlled by setting FS_THR parameter).
 2012-12-10 23:38:43 +09:00
rmackay9
2f1b2b70e6 ArduCopter: added ACRO_TRAINER parameter to allow enabling/disabling the acro training function which will bring the roll back to within +- 45 degrees 2012-12-10 22:27:46 +09:00
rmackay9
dadad8677e ArduCopter: added descriptions for most parameters that did not have them 
Renamed loiter_radius to circle_radius to better reflect it's purpose.
Removed some unused parameters including WP_MODE, WP_MUST_INDEX, LOG_LASTFILE, AXIS_P
 2012-12-10 21:45:57 +09:00
rmackay9
f522ef078e ArduCopter: remove unused functions do_target_yaw, do_loiter_at_location, get_altitude_error and clear_new_altitude 2012-12-10 17:30:50 +09:00
rmackay9
047f848cc7 ArduCopter: remove ThirdOrderCompFilter from list of includes 2012-12-10 09:14:44 +09:00
rmackay9
154e3c33f7 ArduCopter, AP_InertialNav: consolidated ThirdOrderComplementaryFilter into AP_InertialNav to save about 200bytes of RAM 2012-12-10 00:43:11 +09:00
rmackay9
cfe2507c0b ArduCopter: reduce Rate Roll/Pitch P to 0.150 (was 0.175) and increase I to 0.1 (was 0.01) 2012-12-09 18:08:45 +09:00
rmackay9
56ceb230cb ArduCopter: add YAW_OVR_BEHAVE to allow control of when autopilot takes back control of yaw after pilot overrides it during a mission 2012-12-09 18:04:31 +09:00
rmackay9
0f7bb79d89 ArduCopter: add comments to tuning parameters. 
Use RC_CHANNEL types as defined by RC_Channel library.
Remove unused definitions.
 2012-12-09 16:44:42 +09:00
rmackay9
9a05d3bd36 ArduCopter: add comments at the top of many navigation functions 2012-12-09 15:50:50 +09:00
rmackay9
8c2423f618 ArduCopter: code clean-up. Changed update_nav_wp to use a switch statement and relocated to navigation.pde 2012-12-09 15:24:19 +09:00
rmackay9
b36eb406d4 ArduCopter: allow alt hold to be engaged with alt < 1m because sometimes we get baro drift. 
Also initialisation of target altitude is done in set_throttle_mode function.
 2012-12-09 14:48:01 +09:00
rmackay9
b4e5176e2a ArduCopter, AP_InertialSensor: restore mpu6k sample rate to 200hz but keep default filtering at 42hz. 2012-12-09 14:27:33 +09:00
Robert Lefebvre
aa4d4f8c24 ACM: Adding Pre-Compiler Define for Stabilize Throttle Mode. 2012-12-08 20:41:05 -05:00
Robert Lefebvre
0eb57bf93d ACM: TradHeli 
Fix to make update_throttle_cruise work with stab_throttle scaling.
 2012-12-08 15:12:39 -05:00
Robert Lefebvre
1b97a92098 ACM: Code Cleanup 2012-12-08 14:49:38 -05:00
rmackay9
f98a807d36 ArduCopter: remove debug related to yaw mode used for alt hold 2012-12-08 14:24:50 +09:00
rmackay9
9dd978576b ArduCopter: auto yaw changes to allow pilot override of yaw during missions 
Added set_yaw_mode to better control of yaw controller changes and variable initialisation.
Replaced AUTO_YAW mode with separate yaw controllers YAW_LOOK_AT_NEXT_WP, YAW_LOOK_AT_LOCATION, YAW_LOOK_AT_HEADING.
Pilot manual override of yaw causes yaw to change to YAW_HOLD (i.e. manual yaw) until next waypoint is reached.
Added get_yaw_slew function to control how quickly autopilot turns copter
Changed YAW_LOOK_AHEAD to use GPS heading and moved to new get_look_ahead_yaw function in Attitude.pde
Renamed variables: target_bearing->wp_bearing, original_target_bearing->original_wp_bearing.
Removed auto_yaw_tracking and auto_yaw variables and update_auto_yaw function as they are no longer needed.
Simplified MAV_CMD_CONDITION_YAW handling (do_yaw).  We lose ability to control direction of turn and ability to do long panorama shots but it now works between waypoints and save 20bytes.
 2012-12-08 14:23:32 +09:00
rmackay9
85c8bdce15 ArduCopter: removed unused and out-of-date #defines from APM_Config.h 2012-12-08 13:38:39 +09:00
rmackay9
68ca123224 ArduCopter: remove some unused #defines 2012-12-07 15:17:35 +09:00
rmackay9
99b32a39c4 ArduCopter: InertialNav time constant CH6 tuning changed to only update enabled axis 2012-12-07 13:01:40 +09:00
rmackay9
cca9f9dbce ArduCopter: do_set_servo fix to resolve -1 being assigned to uint8_t 2012-12-07 12:58:44 +09:00
rmackay9
3a90fc77f9 ArduCopter: add dataflash logging of camera events 2012-12-07 00:57:08 +09:00
rmackay9
d74cf54b5d ArduCopter: allow triggering of camera from a mission 2012-12-06 23:48:30 +09:00
rmackay9
d3de77f74c ArduCopter: fix do_set_servo so that it works again 2012-12-06 20:18:33 +09:00
rmackay9
653535b9a1 ArduCopter: added CH7 option to trigger camera 
Restructured reading of channel 7 into a switch statement.
 2012-12-06 17:47:01 +09:00
rmackay9
4ca27defb3 ArduCopter: update comments related to CH7 switch options 2012-12-06 17:40:36 +09:00
rmackay9
75401756f2 ArduCopter: maintain loiter control even below 1m while landing 2012-12-06 12:40:53 +09:00
rmackay9
2dd4694eef ArduCopter: adjusted pid_throttle_accel dt to 0.01 (100hz) 2012-12-06 10:32:12 +09:00
rmackay9
269e02ee93 ArduCopter: bug fix - initialise inertial nav 2012-12-06 10:32:07 +09:00
rmackay9
8d682b9812 ArduCopter: disable INERTIAL_NAV_XY by default 2012-12-06 10:32:02 +09:00
rmackay9
39d524212f ArduCopter: allow accel based throttle controller to be enabled/disabled with the new THR_ACC_ENABLE parameter. 
When disabled the original velocity based throttle controller is used.
 2012-12-06 10:31:57 +09:00
rmackay9
a5bb54e36e ArduCopter: RTL clean-up and slightly improved landing sensor 
Consolidated RTL state to be captured by rtl_state variable.
Combined update_RTL_Nav and verify_RTL functions which performed the same function but one was for missions, the other for the RTL flight mode.
Renamed some RTL parameters and global variables to have RTL at the front.
Landing detector now checks accel-throttle's I term and/or a very low throttle value
 2012-12-06 10:31:52 +09:00
rmackay9
6da07ef1d2 ArduCopter: increase CONTROL_SWITCH_COUNTER so that flight mode switch must be changed for at least 1/10th of a second 2012-12-06 10:31:46 +09:00
rmackay9
072ffec493 ArduCopter: allow INERTIAL_NAV to be enabled separately for horizontal and vertical position 2012-12-06 10:31:41 +09:00
rmackay9
aa5e7e63a0 ArduCopter: switch on INS in APM_Config.h (i.e. on by default for users uploading through Arduino IDE) 2012-12-06 10:31:36 +09:00
rmackay9
bdb47c449a ArduCopter: pass linear altitude error to throttle rate controllers. 
Previously the requested rate used the square root of the altitude error.

Scale pilot's desired vertical rate and acceleration based on ACCELERATION_MAX_Z and VELOCITY_MAX_Z #defines
 2012-12-06 10:31:31 +09:00
rmackay9
d7f76ebd87 ArduCopter: add tuning of throttle rate controller's I term (THROTTLE_KI) 2012-12-06 10:31:25 +09:00
rmackay9
7b4ed2d227 ArduCopter: restored landing detector to landing throttle mode. 
Added LAND_SPEED parameter to control the rate of descent for the last 10m of a landing.
Added CH6 tuning for accel based throttle controller.
 2012-12-06 10:31:20 +09:00
rmackay9
560bb1d738 ArduCopter: removed unused AUTO_THROTTLE_HOLD #define 2012-12-06 10:31:15 +09:00
rmackay9
7035529953 ArduCopter: remove unused get_desired_climb_rate function 2012-12-06 10:31:09 +09:00
rmackay9
a94826f182 ArduCopter: add set_throttle_mode to better control initialisation of variables 2012-12-06 10:31:04 +09:00
rmackay9
1036b35128 ArduCopter: added back in angle boost and recombined for heli and multicopter 2012-12-06 10:30:55 +09:00
rmackay9
3cbef57c64 ArduCopter: first merge of leonard's accel based altitude controller plus other changes from Randy 
Changes include:
New low-level get_throttle_accel function takes target acceleration and compares vs earth-frame Z accelerometer values to produce output to motors.
Higher level throttle controllers modified to call new get_throttle_accel controller
Throttle_rate_stabilized controller added which maintains a desired climb/descent rate
Throttle_land controller added - descends using normal auto throttle controller to 10m then descends at 50cm/s
Multiple throttle modes added including landing mode
Land flight mode no longer needs GPS
Throttle cruise maintenance moved to update_throttle_cruise function
 2012-12-06 10:30:49 +09:00
Robert Lefebvre
8c18a60766 ACM: Small fix to Yaw Look Ahead 2012-12-04 14:50:14 -05:00
Robert Lefebvre
1d589c0b7d ACM: TradHeli 
Fixes for Attitude rate controllers.
 2012-12-04 14:42:04 -05:00
Robert Lefebvre
5723021be1 ACM: TradHeli 
Creating Rate Feed-Forward Parameters
 2012-12-04 13:47:38 -05:00
Robert Lefebvre
3e65dd3ded ACM: TradHeli APM_Config.h changes 2012-12-04 13:32:40 -05:00
Robert Lefebvre
315a7e8000 ACM: Yaw Look Ahead Changes 2012-12-04 13:26:41 -05:00
Robert Lefebvre
9130045298 ACM: Code Cleanup 2012-11-30 17:05:12 -05:00
rmackay9
8141f0b600 ArduCopter: bug fix - increase mpu6k sample rate to 100hz 2012-11-30 23:49:18 +09:00
Andrew Tridgell
6fbf5ec8f2 Copter: update ArduCopter for new ins interface 2012-11-30 07:15:18 +11:00
Michael Oborne
68aa5e4682 AC add ability to start new accel_scale via mavlink 2012-11-28 21:38:58 +08:00
Andrew Tridgell
2949d58b71 Copter: re-enable sending of GLOBAL_POSITION_INT message 
this gives important raw GPS velocity information, plus relative and
absolute height
 2012-11-28 11:26:19 +11:00
Robert Lefebvre
07d7d90882 ACM: TradHeli 
Bringing in Low Pass Filter for Rate Controllers
 2012-11-26 21:51:23 -05:00
Robert Lefebvre
6b8c39dd10 ACM: Creating Yaw_Look_Ahead yaw mode. 
This function is not fully tested yet.
 2012-11-26 21:37:13 -05:00
Robert Lefebvre
3f0e8dd358 ACM: TradHeli 
Bringing in Low Pas Filter
Commented out because it does not build.
Needs updates to Low Pass Filter Lib
 2012-11-26 21:21:12 -05:00
Robert Lefebvre
e8d619acad ACM: Begin creation of TradHeli rate control. 
May affect Multi-Rotors.
 2012-11-26 21:02:41 -05:00
Robert Lefebvre
6b1fee767a ACM: TradHeli 
Creating Stab_Collective Function to allow for different collective ranges between Stabilize and other modes.
This makes for a smoother collective action in Stabilize mode with manual throttle, while still allowing full collective travel in Acro and other modes.
 2012-11-26 19:37:20 -05:00
Robert Lefebvre
9e45e906fb ACM: TradHeli 
Move some TradHeli #defines into one place in APM_Config to clean up config.h and defines.h
 2012-11-26 19:09:55 -05:00
Robert Lefebvre
b32d7c8b63 ACM: TradHeli 
Prevent helis from arming while RSC control is switched on.
 2012-11-26 19:03:28 -05:00
Robert Lefebvre
95eeda7cf7 ACM: TradHeli 
Removing Angle Boost function.
Does not make sense for helis due to aerodynamics.  Can cause more problems than it solves.
 2012-11-26 18:58:21 -05:00
Robert Lefebvre
8056b78c55 ACM: TradHeli 
Remove Rate I-term reset when throttle stick is on the bottom.  This could be very bad for helis since it's plausible to use full downstick while flying.
There is obviously a risk here of building up a false I-term on the ground but this isn't a good solution for that anyway.
Also removed what appears to be some deadwood.
 2012-11-26 18:49:24 -05:00
Robert Lefebvre
637c9a1a72 ACM: TradHeli 
Removing this "throttle" output restriction for TradHelis.
 2012-11-26 18:44:03 -05:00
Andrew Tridgell
5818aaad42 Copter: fixed build error 
thanks to Marco for pointing this out
 2012-11-24 20:39:35 +11:00
Andrew Tridgell
f6ec932d63 Copter: added reboot in CLI and over MAVLink 
useful for getting out of CLI
 2012-11-24 18:20:37 +11:00
Andrew Tridgell
cd07d965a7 Copter: ported RSSI_PIN option from ArduPlane 
this is useful for OSD users
 2012-11-22 20:59:33 +11:00
rmackay9
3372355e07 ArduCopter: remove commented out remnants of roll_scale_d and pitch_scale_d 2012-11-22 12:50:39 +09:00
rmackay9
eb6d8fca57 ArduCopter: added ReleaseNotes.txt 2012-11-22 09:51:04 +09:00
Robert Lefebvre
6ffc115236 Changes to get_throttle_rate() 
Commented out a bit of code that is not used currently
Change the output constrains to #defines so they can be easily changed, particularly for use in TradHeli.
 2012-11-21 17:11:38 -05:00
Andrew Tridgell
dbdb3e1194 ACM: allow fetch of parameters by index 
this makes it more efficient to re-fetch parameters that are missing
 2012-11-22 00:16:57 +11:00
Andrew Tridgell
bcae83c4f6 ACM: make it possible to run CLI on radio port in ArduCopter 2012-11-21 21:41:34 +11:00
Andrew Tridgell
704da2a5d9 MAVLink: make it possible to enter the CLI over the radio 
this only works on the APM2, where UART0 is also the radio port
 2012-11-21 14:11:05 +11:00
Michael Oborne
a5e3ce4655 remove cli planner mode - no longer used 2012-11-21 07:45:45 +08:00
Michael Oborne
0c84b8abf1 fix unit max. and unit type 2012-11-21 07:42:53 +08:00
Andrew Tridgell
bcf740a82f ACM: support 16 character parameter names 2012-11-20 21:38:58 +11:00
Andrew Tridgell
c008ca7560 ACM: fixed documentation of disabling voltage/current pins for ArduCopter 2012-11-20 20:26:14 +11:00
Andrew Tridgell
69fbcc8683 MAVLink: fixed accel and gyro sensor offsets in MAVLink 2012-11-20 18:32:26 +11:00
rmackay9
810da878e7 ArduCopter: performance monitoring - changed loop counters to uint16_t. 
Removed an unused items from dataflash logging of Performance.
 2012-11-19 11:55:47 +09:00
Andrew Tridgell
dafaa2efc8 SITL: disable optical flow on the desktop build 
it doesn't work yet, as no sensor emulator is available
 2012-11-19 09:04:03 +11:00
Andrew Tridgell
a3c3c59b82 ACM: fixed some memory cast warnings 2012-11-19 08:42:36 +11:00
rmackay9
07a7a1acd8 ArduCopter: replaced digitalRead and digitalWrite with faster calls 
improved performance logging to dataflash
 2012-11-19 01:16:07 +09:00
Andrew Tridgell
531e62d3b5 MAVLink: improve usefulness of logged GPS velocities 
we need them to align with time to use them for accelerations
 2012-11-17 17:45:30 +11:00
Jason Short
5f57678a9c ACM Nav_throttle- removed sign inversion 2012-11-16 17:38:57 -08:00
Robert Lefebvre
9c6e914bf8 Added Leonard to Contributor List. 2012-11-16 15:43:03 -05:00
rmackay9
e92b560df5 ArduCopter: low baterry failsafe 2012-11-15 23:35:41 +09:00
rmackay9
73ed6c9dbf ArduCopter, APM_RC: failsafe if PPM encoder fails to update for 2 seconds 2012-11-15 23:35:36 +09:00
rmackay9
258442770d ArduCopter: flight mode changes ignored while in throttle failsafe 
reaction time to flight mode changes (when not in failsafe) reduced from 0.6 seconds to 0.1 seconds
 2012-11-13 12:50:51 +09:00
rmackay9
cdfd3f9ccc ArduCopter, ArduPlane: rename ap variable in GCS_Mavlink.pde to resolve compiler warning re shadowing of variable 'ap' 
Changed ArduPlane to keep function consistent with ArduCopter
 2012-11-12 13:30:04 +09:00
rmackay9
dcd98eee78 ArduCopter: remove some variables no longer required with introduction of AP_state 2012-11-12 12:41:25 +09:00
rmackay9
ac5dcc8d49 ArduCopter: remove last remanants of rate_d to resolve compiler warning of unused variables 2012-11-12 12:35:58 +09:00
Jason Short
ea7f639ebf ACM: Added fast descent with Bill P's equation for managed accerlation 2012-11-11 18:23:45 -08:00
Jason Short
69db678252 ACM: attitude.pde - adjusted the FF of the alt hold algorithm, the old way was pretty crap. increased the output range of rate controller. 2012-11-11 18:22:54 -08:00
Jason Short
c1b759d5d8 ACM: Added a speed filter for throttle cruise, increased alt change rate for alt hold, increased the max climb_rate reporting 2012-11-11 18:17:33 -08:00
Jason Short
f344eb875a ACM: Allow greater than 45° pitch and roll in Stab 2012-11-11 18:07:58 -08:00
Jason Short
be63481a8c ACM : Logging.pde formatting 2012-11-11 18:06:50 -08:00
Jason Short
9e0b0b9fcd ACM : loging ApState at faster rate 2012-11-11 18:00:10 -08:00
Jason Short
9735a0eff1 ACM: Allow for user defined roll and pitch input max 2012-11-11 18:00:10 -08:00
Andrew Tridgell
fddfb0b1a3 MAVLink: update compass health in SYS_STATUS 
this will make it easier to tell if a I2C error occurred in flight
 2012-11-12 11:26:54 +11:00
rmackay9
bcb9519fd7 ArduCopter: renamed system bitmap to ap_system to resolve desktop compile issues 2012-11-11 22:42:10 +09:00
rmackay9
e212744f4c ArduCopter: failsafe improvements 
resolves momentary throttle drop to zero before failsafe engages
resolves motor cut after 30seconds if flying in stabilize without GPS (now switches to ALT_HOLD with target altitude zero)
disables motors if throttle was zero before failsafe event
 2012-11-11 22:11:12 +09:00
rmackay9
96872493ae ArduCopter: remove unnecessary debug print mesage from save_trim function 2012-11-10 23:10:29 +09:00
rmackay9
95f6357d35 ArduCopter: fix APM2 build 2012-11-10 22:06:23 +09:00
Jason Short
883bb7cfc0 ACM formatting 2012-11-09 22:15:16 -08:00
Jason Short
fb2180ddcd ACM : climb rate option using Bill P's equation 2012-11-09 22:15:16 -08:00
Jason Short
129ec35c35 ACM crosstrack min distance 2012-11-09 22:15:16 -08:00
Jason Short
4b5e0a5046 ACM Logging Events 2012-11-09 22:15:16 -08:00
Jason Short
6dba79e3a7 ACM Log, formatting 2012-11-09 22:15:16 -08:00
Jason Short
549489ddbb ACM : Setup, format 2012-11-09 22:15:16 -08:00
Jason Short
ecdc281315 ACM | removing old files 2012-11-09 22:15:16 -08:00
Jason Short
d2a5928c06 Ap state updates 2012-11-09 22:15:15 -08:00
Jason Short
4d7b9137fe ACM: Added max RTL altitude 2012-11-09 22:15:15 -08:00
Jason Short
bfca0ff9bc ACM: added ap_state.pde 2012-11-09 22:15:15 -08:00
Jason Short
5ad38a32bf ACM : Attitude : added nav param reset 2012-11-09 22:15:15 -08:00
Jason Short
3c78c4a7a3 ACM : Attitude.pde added ap bitfield for failsafe bit 2012-11-09 22:15:15 -08:00
Jason Short
a42c6bb609 ACM : Attitude.pde removed stabilize D 2012-11-09 22:15:15 -08:00
Jason Short
e4cec91e59 ACM : Arducopter Added ap state bitfield, system bitfield 2012-11-09 22:15:15 -08:00
Jason Short
cdabc3878b ACM: Arducopter - remove the stabilize D scheduling 2012-11-09 22:15:15 -08:00
Jason Short
d2a0913b2d ACM : formatting 2012-11-09 22:15:15 -08:00
rmackay9
2b714ff7b0 ArduCopter: remove unused functions wrap_360f, wrap_180f and wrap_PI 2012-11-08 15:20:08 +09:00
rmackay9
14cbe37d3e ArduCopter: remove unused get_stabilize_rate_yaw 2012-11-07 23:28:25 +09:00
rmackay9
b13264c884 AP_InertialNav: reanme AP_InertialNav and ThirdOrderCompFilter classes to resolve desktop build compiler errors 2012-11-07 22:24:00 +09:00
rmackay9
ad431d2f25 ArduCopter: fixed HIL build caused by optical flow semaphore changes 2012-11-07 21:13:34 +09:00
rmackay9
cec96a76d7 ArduCopter: comment out InertialNav related Alt Hold and Loiter PID changes from APM_Config.h 2012-11-07 19:21:36 +09:00
rmackay9
1f801714e8 ArduCopter: incorporate new version of inertial navigation 
Moved several navigation functions from ArduCopter.pde to navigation.pde
 2012-11-07 19:21:31 +09:00
rmackay9
d9b4407e64 AP_InertialSensor: changes after review with Tridge. 
sanity checking added to accelerometer calibration routine.
user feedback is sent using gcs_send_text_fmt instead of Serial.printf.
moved ins parameters to new eeprom number to avoid conflicts with older parameters.
other small changes including renaming of functions and parameters.
 2012-11-07 19:21:15 +09:00
rmackay9
a1b4ec6d0e ArduCopter: move to use new INS library instead of IMU library 2012-11-07 19:21:09 +09:00
Andrew Tridgell
e8ab62f6e5 ACM: switch to GPS velocity numbers in GLOBAL_POSITION_INT 
these numbers are much more useful than the redundent rotated ground
speed. They tell us exactly what the GPS is giving to AHRS
 2012-11-05 15:23:41 +11:00
Jason Short
8a8ed7a711 ACM : Formatting 2012-10-28 12:12:38 -07:00
Jason Short
36040461df ACM : Formatting 2012-10-28 12:12:38 -07:00
Jason Short
e138b0a1d7 ACM: Added simple mode bearing logging for bug hunting 2012-10-28 12:12:38 -07:00
Jason Short
1713279ace ACM: Formatting 2012-10-27 14:13:46 -07:00
Jason Short
5149a8c723 ACM: Added notes, credit to decel code. added speed_min to calc. 2012-10-27 14:13:24 -07:00
Jason Short
73bc90f9b8 ACM: config.h cleanup 
Added LOG_ITERM default to enabled
 2012-10-27 09:59:57 -07:00
rmackay9
cebcc226ee ArduCopter: change TOY_M throttle mode to THROTTLE_HOLD 2012-10-26 10:56:06 +09:00
rmackay9
4877348c49 ArduCopter: remove some unhelpful constraints on nav_lat and nav_lon. 
Increase other constraints from 3200 to 32000.  These constraints are there to ensure int32_t do not cause an overflow when added to an int16_t.
 2012-10-24 22:04:35 +09:00
rmackay9
5e8043fd9c ArduCopter: changed ACRO_ROLL_STABILIZE and ACRO_PITCH_STABILIZE to parameters 
Changes on behalf of Leonard Hall
 2012-10-23 21:30:50 +09:00
Andrew Tridgell
406a5dc328 ACM: save another 20 bytes 2012-10-22 18:59:51 +11:00
Andrew Tridgell
9592be5af7 ACM: saved some more memory for strings 2012-10-22 18:57:08 +11:00
rmackay9
78316adf75 ArduCopter: replace Serial.print with Serial.print_P to save memory. 
Includes replacing flight_mode_strings with print_flight_mode function.
SendDebug macro replaced with direct Serial.print_P calls.
 2012-10-22 16:45:24 +09:00
Jason Short
6a40fcd56a ACM : fix compiler warning on non returning function 2012-10-21 14:37:42 -07:00
Jason Short
8842a7dc1b ACM : Cast to int32_T 
Don't think it really needs it, but I feel better with the cast.
 2012-10-21 14:36:05 -07:00
Jason Short
a0752dc7dc ACM Acceleration management 
removed unused waypoint_radius var
removed slow_wp
updated speed management system to maintain a constant acceleration or deceleration of 1m/s
changed version to 2.8.1a
 2012-10-21 14:32:39 -07:00
rmackay9
a37a9b5b67 ArduCopter: updated firmware version to 2.8 2012-10-20 09:50:53 +09:00
rmackay9
4395fad6e9 ArduCopter: incremented eeprom format version to force users to accept the new defaults. 
Particularly important is the roll-pitch I term move from the stabilize to rate controllers.
 2012-10-19 16:14:51 +09:00
Pat Hickey
d4bb8a10d7 Update ArduCopter and ArduPlane dependencies on AP_Menu 2012-10-18 20:53:39 -07:00
Robert Lefebvre
bfade7d0ed Fixed that last commit 
#define Stupid_Mistake
 2012-10-18 16:50:42 -04:00
Robert Lefebvre
592f4040fd Changed RLT Yaw Mode for TradHeli. Also a few comment cleanups. 2012-10-18 16:39:05 -04:00
rmackay9
1c08e48b4b ArduCopter: updated firmware version to 2.7.4-Zeta 2012-10-18 23:30:28 +09:00
rmackay9
583f2e49a3 ArduCopter: integrated Leonard Hall's improved ACRO mode 2012-10-18 23:24:34 +09:00
rmackay9
a2a3eed063 ArduCopter: bug fix for telemetry not working on APM1. 
SPI3 is also UART3.  On APM1 we use UART3 for telemetry and don't need SPI3.
 2012-10-18 19:15:21 +09:00
rmackay9
d2912e4e01 ArduCopter: added spi_semaphore to stop conflicts between dataflash and optical flow sensor on APM1 2012-10-18 17:04:44 +09:00
rmackay9
401fb4101c ArduCopter: removed deprecated mag offset routine. 
Also removed commented-out block of code from navigation.pde.
 2012-10-17 19:47:21 +09:00
rmackay9
9e3c2dd105 ArduCopter: updated firmware version to 2.7.4-Epsilon 2012-10-17 19:27:11 +09:00
rmackay9
8519fe55d3 ArduCopter: more out-of-date commented out code removed 2012-10-17 19:25:14 +09:00
rmackay9
b944d9df26 ArduCopter: bug fix in earthframe->body frame translation. 
Provided by Leonard Hall.

Also removed large unnecessary comments.
 2012-10-17 19:15:25 +09:00
rmackay9
7d7de976c3 ArduCopter: reduced optical flow's I and IMAX terms 2012-10-17 17:47:43 +09:00
rmackay9
956b347d68 ArduCopter: updated firmware version to 2.7.4-Delta 2012-10-17 10:20:41 +09:00
rmackay9
5fbe53a84d ArduCopter: bug fix for get_yaw_rate_stabilized_ef 
Provided by Leonard Hall
 2012-10-17 10:18:24 +09:00
Andrew Tridgell
f828956cb8 battery: use set_pin() to allow pins to be changed at runtime 2012-10-16 17:20:49 +11:00
Robert Lefebvre
063cb41a11 Adding some comments to parameters. 2012-10-15 09:37:02 -04:00
rmackay9
4016f3ba85 ArduCopter: update version information ahead of testing 2012-10-15 18:15:38 +09:00
LeonardTHall
d7b7e1cefa New Yaw controller using rate feed forward and stabilize. 
Signed-off-by: LeonardTHall <LeonardTHall@gmail.com>
 2012-10-15 11:37:49 +09:00
rmackay9
ee5dab9647 ArduCopter: enable ACRO mode's AXIS_LOCK by default 2012-10-14 19:50:45 +09:00
rmackay9
997fe85880 ArduCopter: fixed acro mode 
Changes included:
Removing earth frame roll_rate_trim, pitch_rate_trim and yaw_rate_trim.
Switch ACRO mode to use YAW_ACRO instead of YAW_HOLD.
Changed YAW_ACRO to use stabilize yaw when axis_enabled.
Reset ACRO roll, pitch and yaw targets to current attitude when first entering ACRO.
 2012-10-14 17:47:46 +09:00
rmackay9
240b0b43fd ArduCopter: small comment fixes related to battery monitoring 2012-10-13 20:52:14 +09:00
rmackay9
4a41a3d210 ArduCopter: added BATT_VOLT_PIN and BATT_CURR_PIN parameters to allow support for new 3DR IV battery voltage and current monitor 2012-10-13 18:40:46 +09:00
Robert Lefebvre
dae81d2068 Added #define for Tilt_Compensation. 
Also added some detail to WP_Speed_Max parameter.
 2012-10-12 14:51:31 -04:00
Robert Lefebvre
4e649a381c Added comment detail for Tilt_Comp Parameter. 
Reduced parameter default value for TradHeli.
 2012-10-11 13:17:39 -04:00
rmackay9
1e79d265a1 ArduCopter: remove unnecessary (probably slightly harmful) extra barometer read 
The barometer reads including reading temperature was all moved to a timer but this extra read (originally to read the temperature) was probably forgotten.
 2012-10-11 18:31:10 +09:00
rmackay9
cf3e49eea2 ArduCopter: changed sin_pitch and sin_roll to faster equivalents 2012-10-11 17:54:42 +09:00
rmackay9
03933df5b7 ArduCopter: set default rate roll and pitch I terms to 0.010, and rate yaw to 0.015 
Updated after discussing with Marco
 2012-10-11 17:25:01 +09:00
rmackay9
35fa50234f ArduCopter: move I terms from stabilize to rate controllers 2012-10-11 17:20:05 +09:00
rmackay9
2848bb8ee6 ArduCopter: freeze I terms if motor limits breached 2012-10-11 17:20:00 +09:00
Andrew Tridgell
601fe89baa ACM-HIL: fixed optflow declaration 2012-10-11 11:51:25 +11:00
Pat Hickey
bbc7f050e5 ArduCopter GCS_MAVLink: COMMAND_LONG for arm/disarm motors 
Date: Wed, 26 Sep 2012 15:56:43 -0700
Subject: ArduCopter arm/disarm command consensus
From: Pat Hickey
To: Michael Oborne
Cc: "Craig J. Elder", arducopter
<arducopter@googlegroups.com>,
    mavelous <mavelous@googlegroups.com>

    Michael,

    Per our discussion today,

    In a MAVLINK_MSG_ID_COMMAND_LONG
    A MAV_CMD of type MAV_CMD_COMPONENT_ARM_DISARM
    with component id MAV_COMP_ID_SYSTEM_CONTROL = 250,
    uses param index 1 to specify an arm/disarm motors event: 1 to arm,
    0 to disarm

    Thanks for working this out with me. Sorry to get it so completely
    wrong the first time around!

    Best
    Pat
 2012-10-10 18:59:55 +08:00
Pat Hickey
da374f9043 ArduCopter: Provide AP_Semaphore instance for SPI3 bus on APM2. 2012-10-09 11:39:39 -07:00
rmackay9
b876733c0d ArduCopter: added message to console when entering ESC Calibration on startup 2012-10-09 12:31:05 +09:00
rmackay9
c0ad98be31 ArduCopter: failsafe added to shutdown motors if mainloop fails 2012-10-09 12:30:17 +09:00
rmackay9
fa0963d592 ArduCopter: APM_Config.h - make it ever so slightly easier to enable INERTIAL_NAV 2012-10-08 12:31:51 +09:00
rmackay9
3c9ba94f42 ArduCopter: bug fix to ROI when no camera mount is specific 2012-10-08 12:31:10 +09:00
rmackay9
7cf60e61b4 ArduCopter: bug fix in earth-frame to body-frame conversion for roll 2012-10-07 19:14:40 +09:00
rmackay9
05fd04134a ArduCopter: fix heli build 2012-10-06 13:46:19 +09:00
rmackay9
61d0c8e35c ArduCopter: added AP_Semaphore to list of includes 2012-10-06 12:41:58 +09:00
rmackay9
af1d6a9b82 ArduCopter: reduce Stabilize Yaw P term to 4.5 2012-10-03 14:19:49 +09:00
rmackay9
e375a27058 ArduCopter: prioritise rate controllers, rate controller targets converted to body frame 2012-10-03 14:10:31 +09:00
rmackay9
ea4f256f8e ArduCopter: BATT_PIN parameter added to allow you to select which pin is used for voltage and current measurements 
To save a parameter, the current sensor pin is assumed to always be 1 higher than the voltage pin.
 2012-10-02 22:16:19 +09:00
Michael Oborne
a38fef65c7 AP,AC Add ability to override an altitude in any auto mode, on the current active target 2012-09-30 07:29:33 +08:00
rmackay9
95763e610b ArduCopter: allow DMP to run in parallel with DCM 
Parallel DMP can be enabled by #define SECONDARY_DMP_ENABLED in APM_Config.h
New DMP dataflash log type added to allow easy comparison with DCM
 2012-09-30 00:25:40 +09:00
rmackay9
8c6fd340d7 AP_AHRS: added scheduler parameter to init 
Required by the AP_AHRS_MPU6000 class which needs to disable timed processes that could interfere with it's communication with the mpu6000
 2012-09-29 13:51:21 +09:00
rmackay9
41fbb19cf5 AP_InertialSensor_MPU6000: replaced _cs_pin parameter with #define and saved 1 byte of memory 
Updated ArduCopter, ArduPlane and example sketches in AP_InertialSensor, AP_IMU and AP_AHRS libraries because they no longer need to pass in cs_pin to the constructor
 2012-09-28 19:21:59 +09:00
rmackay9
bae53807b2 ArduCopter: tiny formatting change in defines.h 2012-09-27 17:40:54 +09:00
rmackay9
280488fa5e ArduCopter: bug fix to display ITERM enabled/disabled properly from cli 
Also changed header for this message type to ITERM instead of just IT to make it more clear what it is
 2012-09-27 17:40:30 +09:00
rmackay9
ed881117e0 ArduCopter: updated version to 2.7.4-Beta 2012-09-25 23:39:15 +09:00
rmackay9
fff5d51694 ArduCopter: reduced Loiter Rate I to 0.04 (was 0.08) 2012-09-25 19:08:31 +09:00
rmackay9
a71aa21514 ArduCopter: increase default Loiter Rate P to 5.0 2012-09-25 12:19:44 +09:00
rmackay9
b2f12c4854 ArduCopter: optical flow initialisation changes now that optical flow library automatically works on APM1, APM2 and APM2.5 2012-09-24 18:39:33 +09:00
rmackay9
889d1bb36c ArduCopter: alt hold bug fix - removed reset next_WP in init_home 2012-09-23 01:00:06 +09:00
rmackay9
b3ff368589 ArduCopter: position lead filters modified to use lag which varies by gps 2012-09-20 15:49:09 +09:00
rmackay9
361ff0c08f ArduCopter: allow PID logging of throttle. Make get_angle_boost actually use parameter passed in. 2012-09-18 23:19:23 +09:00
rmackay9
93ae29a3e9 ArduCopter: added throttle curve (although disabled by default) for all multicopters 2012-09-18 23:05:08 +09:00
rmackay9
498cbb063b ArduCopter: set fast gains while auto trim is being executed 2012-09-18 09:03:29 +09:00
Andrew Tridgell
5fd39bb928 ACM: updates for new GPS detection 
a GPS can now be attached after startup
 2012-09-17 14:45:47 +10:00
rmackay9
6f32f52377 ArduCopter: bug fix in Log_Read_Attitude. It was printing two uninitialised variables. 2012-09-17 13:44:29 +09:00
rmackay9
303ca11c4c HIL: changes to fix HIL for ArduCopter after recent timing changes. 
Changes include using AP_PeriodicProcess and calling imu.init even in HIL mode
 2012-09-15 18:42:56 +09:00
rmackay9
b6d2d4723f ArduCopter: print firmware version of code instead of zero. 2012-09-13 21:49:11 +09:00
rmackay9
9e66b555cb ArduCopter: removed INSTANT_PWM from ArduCopter and AP_Motors library 2012-09-13 21:31:13 +09:00
Jason Short
072085d2d8 ACM : better debugging text 2012-09-12 23:06:06 -07:00
Jason Short
6b6075ed30 ACM l Prevent pre-mature finish of mission 2012-09-12 23:06:06 -07:00
Jason Short
834f961409 ACM : Fix enduf 2012-09-10 21:25:53 -07:00
Jason Short
4c8e257ea2 ACM : forced setup_show to dump params during log dump for better analysis. 2012-09-10 20:52:30 -07:00
Jason Short
34e07c826f ACM : Added centralized Iterm logging at a lower rate. Logs all iterms. 2012-09-10 20:26:48 -07:00
Jason Short
e8e8c27db4 ACM Mavlink - fixed comparison of unsigned to signed int by casting to uint8_t 2012-09-10 20:22:57 -07:00
Jason Short
a73bc70553 ACM : Params - formatting cleanup 2012-09-10 20:22:11 -07:00
Andrew Tridgell
841d2700b6 ACM: use spare CPU cycles to read the magnetometer 2012-09-10 11:38:18 +09:00
rmackay9
fd110a2723 ArduCopter: modified mainloop timing to be in sync with the arrival of new data from the IMU. 
This reduces the maximum delay between when new sensor data arrives and when it is actually used by about 5ms.
 2012-09-10 11:37:53 +09:00
rmackay9
42406c827a ArduCopter: added NUM_IMU_SAMPLES_FOR_XYZHZ definitions for MPU6000 and Oilpan to allow more syncing of the mainloop with the arrival of data from the IMU. 2012-09-10 11:37:48 +09:00
rmackay9
5d3ddf1fc9 ArduCopter: bug fix for ROI not working if user did not have a camera mount 
Changed verify_nav_roi command to attempt to point at the target if our camera mount type is not pan_tilt nor pan_tilt_roll
 2012-09-10 02:03:32 +09:00
Andrew Tridgell
f97104b435 ACM: use compass.accumulate() in ArduCopter 
this gives us a much less noisy magnetometer
 2012-09-08 10:06:04 +10:00
Michael Oborne
c1235c55d5 Fix Approach Altitude min 2012-09-06 17:43:58 +08:00
Pat Hickey
b02340fe10 APM_Config.h for ArduCopter/ArduPlane: better descr of APM2_BETA_HARDWARE 2012-09-05 15:36:57 -07:00
rmackay9
5073e56c06 ArduCopter: upgraded firmware version to 2.7.3 2012-09-02 12:58:16 +09:00
rmackay9
c9d34c1737 ArduCopter: fixes to allow AP_Mount to work on APM1 with original default channels and fix to reenable support for 3-axis gimbals on APM2. 
Channels 5 to 11 changed to RC_Channel_aux.
Removed channel 9 because APM_RC doesn't support it in any case.
Updated EEPROM format version to 119 because of the change to RC_Channel_aux and because k_param_rc_11 moved to be after k_param_rc_10.
 2012-09-02 12:51:23 +09:00
rmackay9
9013d9be43 ArduCopter: remove unnecessary references to CH_CAM_PITCH, CH_CAM_ROLL, CH_CAM_YAW 2012-09-02 12:47:27 +09:00
Craig Elder
274b2e2143 Arducopter: Release 2.7.2 2012-08-31 19:18:10 -07:00
Andrew Tridgell
e8d928cca4 ACM: added TELEM_DELAY to ArduCopter 2012-08-30 09:03:01 +10:00
Jason Short
51969dca22 ACM Log.pde : whitespace clean up 2012-08-28 21:22:07 -07:00
Jason Short
082913efd4 ACM : revert back to the 2.6 climb rate calc 
The current filter is outputting wild oscillations.
 2012-08-28 21:22:07 -07:00
Craig Elder
4ad516c445 Arducopter: increased MAVLINK delay to 6s to reduce the chance of xBee bricking 
Arduplane:  increased MAVLINK delay to 6s to reduce the chance of xBee bricking
Ardurover:  increased MAVLINK delay to 6s to reduce the chance of xBee bricking
 2012-08-28 20:09:10 -07:00
rmackay9
2ad6dcb7c4 ArduCopter: increased Stabilize Roll and Pitch I term to 0.05 (was 0.01) based on feedback from Jason 2012-08-29 11:34:53 +09:00
Craig Elder
d8a2bfb9e8 Arducopter: Preparing for 2.7.2 Release 2012-08-28 18:30:41 -07:00
Jason Short
fd4bc69d77 ACM : Logging updates 2012-08-28 15:40:08 -07:00
Jason Short
9d64bea2ef ACM: Altitude Adjust 2012-08-28 15:40:08 -07:00
Jason Short
98cc65862d ACM : Log Timing 2012-08-28 15:40:08 -07:00
rmackay9
2e9e3ce5a6 ArduCopter: increase SPI bus speed to 2Mhz after IMU initialisation has completed (MPU6000 accepts maximum of 1Mhz for some registers but up to 20Mhz for main sensor and interrupt registers) 2012-08-28 17:29:48 +09:00
rmackay9
b4b394e67e ArduCopter: reduced Rate Roll and Pitch PID values 
RATE_ROLL_P, RATE_PITCH_P reduced to 0.165 (was 0.185)
RATE_ROLL_D, RATE_PITCH_D reduced to 0.004 (was 0.008)
 2012-08-26 10:45:45 +09:00
uncrustify
09fbe8e29a uncrustify ArduCopter/APM_Config.h 2012-08-21 19:19:50 -07:00
uncrustify
429c41155c uncrustify ArduCopter/config.h 2012-08-21 19:19:50 -07:00
uncrustify
969166c4e3 uncrustify ArduCopter/system.pde 2012-08-21 19:19:50 -07:00
uncrustify
841b4ce9c8 uncrustify ArduCopter/test.pde 2012-08-21 19:19:50 -07:00
uncrustify
bb6e4ac969 uncrustify ArduCopter/setup.pde 2012-08-21 19:19:50 -07:00
uncrustify
7f89e6c677 uncrustify ArduCopter/motors.pde 2012-08-21 19:19:50 -07:00
uncrustify
d49df965f3 uncrustify ArduCopter/navigation.pde 2012-08-21 19:19:50 -07:00
uncrustify
6791da4ee7 uncrustify ArduCopter/commands_logic.pde 2012-08-21 19:19:50 -07:00
uncrustify
f783ace0de uncrustify ArduCopter/Attitude.pde 2012-08-21 19:19:50 -07:00
uncrustify
2438cd32fc uncrustify ArduCopter/Parameters.pde 2012-08-21 19:19:50 -07:00
uncrustify
4021a64747 uncrustify ArduCopter/ArduCopter.pde 2012-08-21 19:19:50 -07:00
uncrustify
c1ce689e38 uncrustify ArduCopter/Log.pde 2012-08-21 19:19:50 -07:00
uncrustify
6a893c11c7 uncrustify ArduCopter/Parameters.h 2012-08-21 18:57:21 -07:00
uncrustify
b9ba41c12a uncrustify ArduCopter/defines.h 2012-08-21 18:57:21 -07:00
uncrustify
d0e48755ab uncrustify ArduCopter/config_channels.h 2012-08-21 18:57:21 -07:00
uncrustify
4311b15005 uncrustify ArduCopter/UserVariables.h 2012-08-21 18:56:57 -07:00
uncrustify
3d4ca7aa30 uncrustify ArduCopter/GCS.h 2012-08-21 18:56:56 -07:00
uncrustify
37e00fae80 uncrustify ArduCopter/APM_Config_mavlink_hil.h 2012-08-21 18:56:56 -07:00
uncrustify
42f107706e uncrustify ArduCopter/planner.pde 2012-08-21 18:56:56 -07:00
uncrustify
8dccd9d6b0 uncrustify ArduCopter/sensors.pde 2012-08-21 18:56:50 -07:00
uncrustify
df6bdfbd5a uncrustify ArduCopter/UserCode.pde 2012-08-21 18:56:01 -07:00
uncrustify
f7a748d43b uncrustify ArduCopter/GCS_Mavlink.pde 2012-08-21 18:56:01 -07:00
uncrustify
30c0328d0c uncrustify ArduCopter/flip.pde 2012-08-21 18:56:01 -07:00
uncrustify
58b5f4e271 uncrustify ArduCopter/GCS.pde 2012-08-21 18:56:00 -07:00
uncrustify
c7ff6a6335 uncrustify ArduCopter/toy.pde 2012-08-21 18:56:00 -07:00
uncrustify
1e2c01d8f6 uncrustify ArduCopter/commands_process.pde 2012-08-21 18:56:00 -07:00
uncrustify
b6dd8aa592 uncrustify ArduCopter/leds.pde 2012-08-21 18:55:44 -07:00
uncrustify
2d398aa663 uncrustify ArduCopter/commands.pde 2012-08-21 18:55:43 -07:00
uncrustify
a75d477071 uncrustify ArduCopter/radio.pde 2012-08-21 18:55:43 -07:00
uncrustify
ff0e2e537e uncrustify ArduCopter/events.pde 2012-08-21 18:55:43 -07:00
uncrustify
4303e0bcae uncrustify ArduCopter/limits.pde 2012-08-21 18:55:16 -07:00
uncrustify
a20f75e12c uncrustify ArduCopter/inertia.pde 2012-08-21 18:54:57 -07:00
uncrustify
7c8f4421a3 uncrustify ArduCopter/control_modes.pde 2012-08-21 18:54:57 -07:00
Andrew Tridgell
6d11940ada AHRS: removed Quaternion build support from APM/ACM/rover 2012-08-22 10:42:21 +10:00
Andrew Tridgell
e9928e78de ACM: fixed TradHeli build 2012-08-22 09:55:31 +10:00
Robert Lefebvre
575b99b4be TradHeli: Creating Flybar Acro mode. 2012-08-21 16:54:01 -04:00
Andrew Tridgell
16e06ea1f4 ACM: build DMP version in autotest 
this gives it a chance of keeping working
 2012-08-21 15:58:59 +10:00
Andrew Tridgell
bf2319a0fc AHRS: fixed reference to AHRS var_info for APM and ACM 2012-08-21 15:58:32 +10:00
Andrew Tridgell
1b0f5ac84f ACM: use ahrs.set_fast_gains() on arm/disarm 2012-08-21 15:38:31 +10:00
rmackay9
1d32e03f61 ArduCopter: added ACCEL_ALT_HOLD and INERTIAL_NAV to config.h and commented out of APM_Config.h. 
Reduces possibility of difference between arduino ide compiled code and script built code (i.e. autotester, mission planner)
 2012-08-19 12:31:02 +09:00
rmackay9
75459b09be ArduCopter: changed reset_throttle_counter to uint8_t to get rid of overflow bug that was preventing target altitude from being locked in after pilot input down throttle. 2012-08-19 11:50:35 +09:00
Jason Short
c81064279a ACM : removed 2-level DCM gain change - .1 will still be the default. 2012-08-18 15:43:34 -07:00
Jason Short
575a9c4fd1 ACM : Fix for reloading the user DCM gains upon arming 2012-08-18 13:17:43 -07:00
Jason Short
0a25a189eb ACM | Attitude.pde - removed next_wp.alt reset. 2012-08-18 12:25:48 -07:00
Jason Short
988d0c98fc ACM : Alt hold adjustment - made angle boost work during alt hold changes. 
increased length of delay when reverting to automatic hold to deal with latency of baro sensor
 2012-08-18 09:30:46 -07:00
Jason Short
77f47a45d0 ACM : Nav rate limit lowered to prevent bad oscillations due to GPS latency. 2012-08-18 09:04:22 -07:00
Jason Short
522fa58ea5 ACM : temp fix for throttle output limit 
I had a bad crash when I lost authority. The logs showed the throttle pegged at 1000 which killed my control. We went round and round on this and somehow settled on no limit. That wasn't a good idea. This should really be hard coded into the Motors Library, but for now I'm just sticking it here.
 2012-08-18 09:04:22 -07:00
Jason Short
bc631b656e ACM: Added a more sane limit to Angle boost 2012-08-18 09:04:21 -07:00
rmackay9
64cfaf74b7 ArduCopter: renamed "_new_alt" parameter to just "new_alt" in force_new_altitude and set_new_altitude functions 2012-08-18 21:46:48 +09:00
rmackay9
5b6f7f0012 ArduCopter: modified altitude hold so that 1 second slow down period is executed after pilot moves throttle back into deadzone 2012-08-18 21:45:49 +09:00
rmackay9
11e946eb54 ArduCopter, ArduPilot: revert mavlink delay callback to be "unsigned long" 2012-08-18 20:34:41 +09:00
rmackay9
2e4e8bbf1a ArduCopter: changed "unsigned long" to "uint32_t" 2012-08-18 19:05:55 +09:00
rmackay9
99859ae42f ArduCopter: added cast to (int) in printf statments. 
Also modified dump_log function's last_log_num to be int16_t to match return type from DataFlash's find_last_log method.
 2012-08-18 18:58:15 +09:00
rmackay9
7a6732fb4b ArduCopter: removed unused icount variable from commands_logic.pde to reduce compiler warnings. 2012-08-18 16:04:23 +09:00
rmackay9
87d5b5944d ArduCopter: commented out get_acro_yaw2 function to reduce compiler warnings 2012-08-18 16:03:49 +09:00
rmackay9
8a6085a3ba ArduCopter: removed unused maggy variable from test.pde to reduce compiler warnings. 2012-08-18 16:03:26 +09:00
rmackay9
07c7c3945d ArduCopter: fixed small bug re arming_counter for TOY mode 2012-08-18 13:21:41 +09:00
rmackay9
92688a793a ArduCopter: fixed compiler warning related to shadowing of control_roll and control_pitch in get_of_roll and get_of_pitch. 2012-08-18 11:48:12 +09:00
rmackay9
8c636ca263 ArduCopter: fix compiler error related to printing boarding type in dataflash logs. 2012-08-18 11:47:10 +09:00
Michael Oborne
b2b73cc6cb AC fix some Parameter units 2012-08-18 08:30:16 +08:00
Jason Short
1b7e27658b ACM : removed old note 2012-08-17 17:03:40 -07:00
Jason Short
0ac1373591 ACM Logging - added APM version #, stab_I term logging 2012-08-17 17:03:40 -07:00
Jason Short
387a021c30 ACM : APM_Config.h : default removed for toy mixer. 2012-08-16 15:41:35 -07:00
Jason Short
3ee2fd3fb6 ACM: Config.h - added default for toy mixer 2012-08-16 15:40:28 -07:00
Jason Short
770956a3fd ACM : Made control_roll and pitch global for logging; made yaw towards waypoint use initial angle and not a recalculated angle to deal with wiggles as we approach WP 2012-08-16 15:39:50 -07:00
Jason Short
9cee1b2fa0 ACM : Upped Yaw Limit to 2200 2012-08-16 15:38:46 -07:00
Jason Short
bdc1c41e62 ACM: made target bearing the lead filtered location 
Had some major nav trouble from crosstrack if I used the laggy position.
 2012-08-16 15:38:25 -07:00
Jason Short
0f9f72e8ab ACM: added nav_yaw to att logging 
Removed unnecessary casting
 2012-08-16 12:43:55 -07:00
rmackay9
36f947acb9 ArduCopter: changed all "int" to "int16_t" and a few "long"s to "int32_t". 
Also moved "simple_counter" variable from global scope to the "update_simple_mode" function which is the only place that it's actually used.
 2012-08-16 20:04:46 +09:00
rmackay9
a72bf6ef57 ArduCopter: replaced abs with labs as required in a few places. 
Also fixed a small bug in the get_stabilize_pitch function in which it was using the roll (instead of pitch) to decide whether it should let the i term build-up or not.
 2012-08-16 17:51:09 +09:00
Jason Short
4d5d16720b ACM Test: Added a return statement 2012-08-15 21:37:23 -07:00
Jason Short
31f31eec75 ACM : Test for bearing calc 2012-08-15 21:04:24 -07:00
Jason Short
99dcbd039d ACM Log : fixed formatting 2012-08-15 21:04:24 -07:00
Andrew Tridgell
ed064b2506 MAVLink: enable fetching of single parameters 
this makes it possible for the GCS to fetch a single parameter by
name, which is useful for parameters that change in flight
 2012-08-16 10:14:46 +10:00
Jason Short
f1af837543 ACM: Switched to filtered loc 2012-08-14 14:11:52 -07:00
Jason Short
cdd2093a4c ACM: Switched to filtered_loc for distance calcs 2012-08-14 14:11:52 -07:00
Jason Short
a4bc5950cf ACM: Added a filtered version of Location for GPS lag. 
I did this because when you are close to a WP the Yaw angle can go a bit wacky as the location jumps around. The filtered loc is only used in the wp_distance calculation now.
 2012-08-14 14:11:51 -07:00
Jason Short
993c89c4f8 ACM: Revved the version 2012-08-14 14:11:51 -07:00
rmackay9
2a83f1eef2 ArduCopter: remove RTL_LAND parameter as it's been deprecated in favour of APPROACH_ALT. 
Updated comments on ALT_HOLD_RTL and APPROACH_ALT to make it a little easier to understand.
 2012-08-14 12:14:35 +09:00
Jason Short
b01a71c4b9 ACM: Toy mode updates - added second toy mode 2012-08-11 22:37:27 -07:00
Jason Short
8160aa6103 ACM : Toy mode updates 2012-08-11 22:37:27 -07:00
Jason Short
1e0ab8768e ACM: Toy mode updates 2012-08-11 22:37:26 -07:00
Jason Short
b27c1ce396 ACM : Added check for second Toy mode 2012-08-11 22:37:26 -07:00
Jason Short
11b7475ff9 ACM : Added CH7 multimode triggers, split Toy mode into two 2012-08-11 22:37:26 -07:00
Jason Short
45574c0b1a ACM : CH_7 multimode option added 2012-08-11 22:37:26 -07:00
Jason Short
c305237e3a ACM : Added CH_7 Multimode 2012-08-11 22:37:26 -07:00
Andrew Tridgell
3bdc7d41be INS: disable INS AP_Param table when not on APM1 hardware 
this could cause overwriting of memory with default values
 2012-08-11 22:06:03 +10:00
Amilcar Lucas
780b469b11 ArduCopter: Enable the aux servos later, only in the slow periodic loop 
This might solve some of the boot issues some users are having
 2012-08-11 12:58:13 +02:00
Andrew Tridgell
81440a1b09 AHRS: fixed build 
AP_Airspeed.h is now needed to build AHRS
 2012-08-11 12:22:55 +10:00
Andrew Tridgell
c2dc920d02 ACM: allow users to set the AHRS_YAW_P and AHRS_RP_P 
the forced set left users with parameters they couldn't use
 2012-08-11 08:35:10 +10:00
Jason Short
3ad08b7ffc ACM : Added larger WP radius for fast waypoints so we don't loose speed angling in on the WP at the last second. 2012-08-10 10:02:32 -07:00
Jason Short
9a568385b0 ACM increase the minimum speed at WP 2012-08-10 10:01:40 -07:00
Jason Short
be0559864c ACM : switched to get_bearing_cd 2012-08-09 17:04:30 -07:00
Jason Short
132ac7d412 ACM : attitude.pde - removed unused function 2012-08-09 17:04:12 -07:00
Jason Short
e73c0250ad ACM: Radio.pde - toy mode updates 2012-08-09 17:00:11 -07:00
Jason Short
f641c5d077 ACM system.pde - toy mode update, cleanup of throttle cruise code 2012-08-09 16:59:44 -07:00
Jason Short
35839070ad ACM - isolated Toy code 2012-08-09 16:59:44 -07:00
Jason Short
adf5939ba4 ACM: navigation - Alt cleanup, fast corner support 2012-08-09 16:59:44 -07:00
Jason Short
6037fabb5c ACM Motors.pde 
Added Toy mode options,
Added DCM kp set to .1(armed) and .8 (disarmed)
 2012-08-09 16:59:44 -07:00
Jason Short
88a94c88b5 ACM : more aggressive and flexible flip code. Will flip right or left, and while pitching hard. 
Increase in throttle is removed from init sequence to remove delay.
 2012-08-09 16:59:44 -07:00
Jason Short
d674baadd2 ACM : Events - renamed target alt 2012-08-09 16:59:44 -07:00
Jason Short
07bd1940e7 ACM Defines.h -added Toy mixer enums 2012-08-09 16:59:43 -07:00
Jason Short
26e3d6090e ACM control modes - renames CH_7 flag 2012-08-09 16:59:43 -07:00
Jason Short
3e57f8afd8 ACM: config.h = updated default gains 
More yaw rate control
 2012-08-09 16:59:43 -07:00
Jason Short
b5156185cc ACM Commands parser to look for future nav commands to inspect upcoming turn angle 2012-08-09 16:59:43 -07:00
Jason Short
d796814dfc ACM : Commands Logic 
Altitude cleanup
 2012-08-09 16:59:43 -07:00
Jason Short
98b8866215 ACM: Added fast corner support 2012-08-09 16:59:43 -07:00
Jason Short
5d756decd2 ACM : Attitude.pde 
yaw limit, moved toy code out of att to it's own pre
 2012-08-09 16:59:43 -07:00
Jason Short
02649f3f11 ACM : Arducopter.pde 
command_nav_index upped to in16t for negative number
renamed trim flag > CH7_flag
Added fast_corner var
removed unused alt vars
Alt hold I term update
 2012-08-09 16:59:43 -07:00
Jason Short
4a56e8ea2c ACM : Toy Mixer options 2012-08-09 16:59:43 -07:00
Andrew Tridgell
dc47074dbd MAVLink: removed the need for Mavlink_compat.h 
we have now fully transitioned to MAVLink 1.0, so we no longer need
the compatibility layer and the old names in the code
 2012-08-09 12:22:46 +10:00
Andrew Tridgell
2a7b298bbc MAVLink: moved mavlink variables back to library 
these were moved to the main sketches to allow for compile time
selection of MAVLink 0.9 vs 1.0. We no longer support 0.9, so we can
move it back, which simplifies some test sketches
 2012-08-09 12:06:21 +10:00
Amilcar Lucas
d34549f386 Add an optional second mount to ArduPlane and ArduCopter 2012-08-08 23:22:24 +02:00
Amilcar Lucas
0b0b9c29a2 Allow fully independent operation of two AP_Mount instances 2012-08-08 23:11:23 +02:00
Amilcar Lucas
9cc705939a Add a second mount instance 2012-08-08 23:07:25 +02:00
Andrew Tridgell
03714fc695 ACM: make it possible to set AHRS_GPS_GAIN on ArduCopter 
this was affected by the AP_Param change, in particular the
constructor ordering. To ensure a user can set AHRS_GPS_GAIN to 1.0 if
they want to, we need to do a set_and_save() if the value isn't in
EEPROM
 2012-08-08 17:36:01 +10:00
Andrew Tridgell
103b02fe94 ACM: removed pointless load() calls 2012-08-08 16:51:14 +10:00
Andrew Tridgell
fb26160d3b ACM: change to use get_bearing_cd() instead of get_bearing() 2012-08-08 12:12:30 +10:00
Andrew Tridgell
c2a4d59132 AP_Param: update ArduCopter core for new AP_Param interface 2012-08-08 12:11:57 +10:00
rmackay9
f79b90725e ArduCopter: Dan Gray's fix for Condition_Yaw 
command_yaw_dir is an unsigned byte but was being set to a -ve number leading to very incorrect yaw target heading for counter clockwise turns.
command_yaw_end (i.e. turn's end target) was not being set if turn was of type "relative"
 2012-08-07 06:43:10 -07:00
Amilcar Lucas
d9f1140278 ArduCopter: Use generic channel names for AP_Mount servos. 
This simplifies mission planner, the same code can be used for plane and copter now.
 2012-08-06 23:33:51 +02:00
Amilcar Lucas
e93daca17e Fix heli compilation 2012-08-06 23:30:02 +02:00
Amilcar Lucas
f14237126a Add me :) 2012-08-06 00:40:12 +02:00
Amilcar Lucas
aa3cc63b15 ArduCopter: Make the code fit in a 1280 chip again 
Even allows to control a camera/antenna mount, if the user explicitly wants to.
 2012-08-06 00:23:48 +02:00
Amilcar Lucas
0106c133cf Default CLI_SLIDER_ENABLED to DISABLED 
Chris asked for this on the mailing list
 2012-08-06 00:22:33 +02:00
Amilcar Lucas
af08b630cd Spellcheck in comments 2012-08-06 00:21:14 +02:00
Amilcar Lucas
107155fa1a AP_Mount: Allow using any RC channel to control any of the mount axes. 
This has the added benefit of saving 60 bytes and simplifying Mission Planner gui.
Moved some code from RC_Channel_aux to AP_Mount class
The servos get written by the update_mount_position() function, this simplifies main()
PS: The beauty of using libraries: I did not have to touch a single line of ArduPlane's code!
 2012-08-05 23:48:57 +02:00
Amilcar Lucas
b8c7b8a786 RC_Channel: Allow each channel to know who they are, this simplifies the enabling and output function calls. 2012-08-05 23:08:31 +02:00
Amilcar Lucas
afd96025a7 ArduCopter: Save more space in APM1280 2012-08-05 23:05:52 +02:00
Amilcar Lucas
9c1ac2d9e6 More work on ch9, 10 and 11 2012-08-04 19:44:41 +02:00
Amilcar Lucas
4ba847c449 The mount type must be updated periodically 2012-08-04 18:44:08 +02:00
Amilcar Lucas
bbc4bdb729 More flexible RC support 2012-08-04 18:39:20 +02:00
Amilcar Lucas
d29f7023cc Merge from ArduPlane 2012-08-04 18:38:50 +02:00
rmackay9
c091c8e0e6 ArduCopter: bug fix to reset yaw target when zero and when in stabilize or acro mode. 2012-08-01 12:15:02 +09:00
rmackay9
a5b5f6a619 ArduCopter: bug fix to global var_info parameter list for ahrs object. 2012-08-01 10:52:27 +09:00
Andreas M. Antonopoulos
7262b0429a AP_Limits: experimental "bounce" mode. 2012-07-31 18:39:58 -07:00
Andreas M. Antonopoulos
de85442c36 AC2.7.1: Updated version and tag 2012-07-31 13:11:17 -07:00
Jason Short
8c47b0c087 ACM: Toy mode fix - Pitch flipped the sign on roll/Yaw coupling. 2012-07-30 15:43:05 -07:00
rmackay9
77b1785bc6 ArduCopter: reduce stabilize roll, pitch and rate yaw IMAX values 2012-07-30 11:01:45 +09:00
Michael Oborne
e577b51e17 AC remove attitude hil unused extra (gps jump issue.) 2012-07-29 08:18:41 +08:00
rmackay9
5cb4a88292 ArduCopter: reset target yaw when throttle is zero (except if failsafe has been triggered) 2012-07-28 23:05:05 +09:00
rmackay9
3047084ed3 ArduCopter: added DMP_ENABLED to APM_Config.h to make it easier for people to enable it. 2012-07-28 16:31:38 +09:00
rmackay9
670a66667f ArduCopter: fixed HIL build by removing ability to change _kp and _kp_yaw gains (used for accel and gyro sensor mixing) 2012-07-28 16:22:35 +09:00
Michael Oborne
ef870e3ca1 AC remove some attitude HIL limitations 2012-07-28 13:59:30 +08:00
rmackay9
94cb325184 ArduCopter: added ahrs.ini() to system.pde to allow offsets to be pushed into MPU6000's DMP 2012-07-28 14:21:45 +09:00
rmackay9
014f5aae99 ArduCopter: added DMP_ENABLE #define and CH6 tuning value for AHRS_KP 2012-07-28 14:21:07 +09:00
rmackay9
f97257830b ArduCopter: changes in arducopter to support moving AHRS var_info from AP_AHRS to AP_AHRS_DCM 2012-07-28 14:18:31 +09:00
rmackay9
8e5312a759 ArduCopter: add support for MAVLink's MAV_CMD_NAV_ROI command 
do_nav_roi and verify_nav_roi functions added to turn the copter and/or mount in response to a MAV_CMD_NAV_ROI way point
 2012-07-25 11:02:54 +09:00
Michael Oborne
f4705577c8 AC fix sitl attitude hil build 2012-07-24 21:18:36 +08:00
Jason Short
8188058404 ACM: Failsafe Fix for Mission planner initiated AUTO mode 
Keeps the failsafe from exiting Auto mode when returning from failsafe. Added arming ability for Toy mode.
 2012-07-23 19:34:25 -07:00
Andreas M. Antonopoulos
80cf794c86 AC: ArduCopter 2.7 release candidate - updated THISFIRMWARE constant. 2012-07-21 17:52:06 -07:00
Jason Short
b17eb7f768 ACM: Fixed Baro rate patch to work with Sonar and added simple filter 2012-07-21 16:45:00 -07:00
Jason Short
96aabb7712 ACM: Lowered default Alt hold P 2012-07-21 16:45:00 -07:00
Jason Short
55c342c858 ACM: Safety patch for CH7 flip toggle. Prevents flipping while on the ground. ouch. 2012-07-20 16:47:05 -07:00
Jason Short
1d085c8cf4 Added minimum speed for RTL 2012-07-20 13:27:35 -07:00
Jason Short
fcd0e12a1e ACM: Flip code revision to fix bad orientation bug. 2012-07-20 13:27:35 -07:00
Jason Short
ca70acbf64 Arducopter: Added safety check for inadvertent triggering of flip code. 2012-07-20 13:27:35 -07:00
Jason Short
9f6e1347b6 Ardcucopter: RTL distance check update, reset I terms fixed. 2012-07-20 13:27:35 -07:00
Jason Short
613849a8df Arducopter: Force nav_yaw to match auto_yaw when starting a mission 2012-07-19 22:59:03 -07:00
Jason Short
2b20c85279 Arducopter: cleanup, skip out of throttle control when flipping. 2012-07-19 22:35:21 -07:00
Jason Short
fbe898a6db Arducopter: motors.pde formatting 2012-07-19 22:35:21 -07:00
Jason Short
3b496ff229 Arducopter: Upped D rate to .005 by default 2012-07-19 22:35:21 -07:00
Andrew Tridgell
0a12b6ad6f ACM: fixed HIL build with new accel setup code 2012-07-20 12:46:16 +10:00
Andrew Tridgell
85465c9126 MAVLink: fixed another two places where micros() was used for a millisecond time 2012-07-20 11:57:15 +10:00
Jason Short
f46e8468c4 Arducopter: Adjusted speed of climb to not stall out before hitting peak 2012-07-19 17:53:49 -07:00
Jason Short
da6d981479 Arducopter: Testing toy mode - commented out by default 2012-07-19 17:50:42 -07:00
Jason Short
ad45012739 Arducopter: Renamed Config define (RTL_HOLD_ALT) 2012-07-19 17:50:15 -07:00
Jason Short
351b503fb6 Arducopter: Flip Check 2012-07-19 17:49:17 -07:00
Jason Short
49c7579079 Arducopter: Config.h defaults adjustments 2012-07-19 17:48:48 -07:00
Jason Short
610d1d1795 Arducopter: deprecated the get_nav_yaw_offset function. 
Small Toy mode updates
 2012-07-19 17:41:52 -07:00
Jason Short
91062b56af Arducopter.pde: Increased the throttle Hold altitude control 
simplified Yaw reset
 2012-07-19 17:38:25 -07:00
Jason Short
6506ebf69f Arducopter: Fix compile issue 2012-07-19 10:09:16 -07:00
Jason Short
5a73a2b9cd Arducopters parameter: Adjusted RTL_ALTITUDE units so they reflect comments in config.h 2012-07-19 09:50:57 -07:00
Jason Short
2df487ab7b Arducopter: Slower WP deceleration for RTL and WP navigation 
Slower descent and slightly faster ascent
 2012-07-19 09:50:18 -07:00
Jason Short
3401bd3583 Arducopter: Clarified units in comment 2012-07-19 09:49:13 -07:00
Jason Short
3a62608355 Arducopter: Added Slow_WP setting to regular wp navigation 2012-07-19 09:48:54 -07:00
Jason Short
1efc9eac58 Arducopter: Adjust landing speed 
removed commented out calc_loiter_pitch_roll calls
Changed updateRTL to use 1m be default instead of wp_radius to avoid poor loiter entry speed.
 2012-07-19 09:48:31 -07:00
Jason Short
c9d3ab5413 Oilpan ADC parameters added 
including a function that configures each Accel Axis
Defaults matching old behavior
Added param group
 2012-07-18 22:57:11 -07:00
Jason Short
e09d6ad7a8 Arducopter 
Simplified the inertial calcs for now
 2012-07-18 22:57:11 -07:00
Jason Short
a7b1252b51 arducopter 
alt hold state reset
 2012-07-18 22:57:11 -07:00
Jason Short
c995749aaa Arducopter 
upped nav max to 32deg from 30
renamed calc_desired_speed to get_desired_speed
Added get_desired_climb_rate function to do smooth transitions in altitude
modified get_altitude_error to override the older altitude manager.
 2012-07-18 22:57:11 -07:00
Jason Short
66ac438b9e Arducopter 
Better logging for Raw Inertial values
 2012-07-18 22:57:11 -07:00
Jason Short
dcf9f9dab1 Arducopter 
for rate altitude changes
 2012-07-18 22:57:10 -07:00
Jason Short
71248fe114 Arducopter 
increased landing authority
 2012-07-18 22:57:10 -07:00
Jason Short
c9851344e7 Arducopter 
removed old Var
 2012-07-18 22:57:10 -07:00
Jason Short
a88d69e40e Arducopter: 
Loiter unlimited can now travel to a WP and then loiter.
set_altitude for landing now set to 0
 2012-07-18 22:57:10 -07:00
Jason Short
aa645afe2b Arducopter: Altitude change nav 
Split altitude hold into two controls to parallel navigation.
 2012-07-18 22:57:10 -07:00
Jason Short
cb1cdcd4a7 Arducopter: New Alt control code 
Uses a new method to manage altitude changes. Alt hold controller was split into a hold and a rate controller just like navigation. Changing alt is done by specifying a climb rate.
Interactive alt hold is now simplified and is an 80cm climb or descent.
 2012-07-18 22:57:10 -07:00
Jason Short
3f5e787fe8 Arducopter: Flip mode 2012-07-18 22:57:10 -07:00
Jason Short
9dad38e91d Arducopter: Flip mode 
Flip mode graduates
 2012-07-18 22:57:10 -07:00
Jason Short
5965632888 Arducopter: Flip mode 
Flip mode graduates to pre-compiled option
 2012-07-18 22:57:10 -07:00
Jason Short
f73a2004be Arducopter: INS 
updated Nav control to use INS
 2012-07-18 22:57:10 -07:00
Jason Short
98725be0ec Arducopter: INS 
removed calibrate accels for now
 2012-07-18 22:57:10 -07:00
Jason Short
97845cace1 Arducopter: INS 
Updated INS gains
 2012-07-18 22:57:10 -07:00
Jason Short
0d8e8e0a04 Arducopter: INS 
removed IMU test, updated INS test to include normalized gravity accel vector.
 2012-07-18 22:57:10 -07:00
Jason Short
bb99bd4626 Arducopter: INS 
removed zero accells call
 2012-07-18 22:57:10 -07:00
rmackay9
33d8cbfd51 ArduCopter: small bug fix to radio.pde to allow code to compile when MOUNT == DISABLED 2012-07-18 23:49:41 +09:00
rmackay9
b691c3f658 ArduCopter.pde: added call to set_manual_rc_channel to allow pilot's channel 6 to control pitch. 
This initialisation code should be moved to init_ardupilot and/or into the AP_Mount library.
 2012-07-18 23:49:09 +09:00
Michael Oborne
636fcadde4 fix rc libray param gen 2012-07-18 07:03:39 +08:00
Andreas M. Antonopoulos
0e5345d17b AP_Limits: documentation bug (which uncovered a param_parser bug - the irony burns) 2012-07-16 23:35:11 -07:00
Jonathan Challinger
fc4f111d15 Changed mavlink GLOBAL_POSITION_INT.relative_alt message to correctly return altitude above ground. 2012-07-17 16:15:11 +10:00
Andreas M. Antonopoulos
a976a59c88 AP_Limits: Configuration defaults moved to config.h. Fixed AP_LIMITS==DISABLED handling. 2012-07-16 11:46:43 -07:00
Michael Oborne
e632ad6aa4 AC fix limits param gen header 2012-07-15 18:23:06 +08:00
rmackay9
36ecdff593 ArduCopter: removed unused config for CAM_ROLL_GAIN and CAM_ROLL_PITCH now in AP_Mount library) 2012-07-15 16:38:52 +09:00
rmackay9
c495a5f36e ArduCopter: added enable_out_ch and output_ch calls for rc_camera_roll, pitch and yaw servos so they actually move 2012-07-15 16:38:28 +09:00
rmackay9
761dad4e99 ArduCopter: restored set_range calls for RC_Channels 5 ~ 8. 2012-07-15 16:37:40 +09:00
rmackay9
29b6ec0b11 ArduCopter: reverted channel 5~8 to be regular RC_Channel objects, restored rc_camera_roll and rc_camera_pitch RC_Channels and created new rc_camera_yaw RC_Channel to control the camera mount servos. 
Defined camera_mount (MNT_) in Parameters.h and Parameters.pde so that it appears in global parameters list.
Removed unused camera_*_gain and camaera_*_continuous parameters.
 2012-07-15 16:36:05 +09:00
rmackay9
793fb7f059 ArduCopter: added definition for yaw channels. 
APM1 uses channel 11 for camera's yaw servo, APM2 uses channel 8.  This should allow all frame types except octacopters to potentially use a 3 axis camera mount.
 2012-07-15 16:31:23 +09:00
Andreas M. Antonopoulos
c73f7ef3ab AP_Limits library, provides modular "limits" such as altitude and geo-fencing. 2012-07-14 19:26:17 -07:00
Jason Short
584e7dcda4 Arducopter: Removed Yaw Limit for Quads 2012-07-14 14:06:34 -07:00
Jason Short
44b16b7b61 Arducopter: Temp reversion to old Yaw controller. 2012-07-14 12:26:13 -07:00
Jason Short
e3af0c7920 Arducopter: Yaw stop fix 2012-07-14 12:23:10 -07:00
Robert Lefebvre
59e133235f Implementing Yaw Fix. Tried to blend with Jason's changes. 2012-07-14 00:24:22 -04:00
Jason Short
4af392290b Circle_WP: Fix for Yaw toward center, fix for transit to Circle WP from a distance 2012-07-13 19:29:36 -07:00
Jason Short
7b746cf5e1 Arducopter: Wrong define used, caused Copter to Yaw to home when flying missions 2012-07-13 12:51:38 -07:00
Jason Short
d34ca0e6ea Arducopter - commands: Add home logging 2012-07-13 11:51:40 -07:00
Jason Short
d8ff5dcfab Arducopter: Fix circle_WP 2012-07-12 09:22:20 -07:00
Jason Short
a28070e0e0 Arducopter: Loiter unlimited fix 2012-07-12 08:52:49 -07:00
Andreas M. Antonopoulos
d4a0cb5db1 Added Michael Pursifull's Maxsonar HRLV model support 2012-07-11 18:46:47 -07:00
Jason Short
7a5544051d Arducopter 
Lowered WP speed default to 500. 600 was quite high once the nav routines were fixed and quad could achieve that speed.
 2012-07-11 17:46:07 -07:00
Jason Short
6f9e2bf3a8 Arducopter: Toy mode update 
Removed debugging printfs,
lowered roll response - was too high in test flights
made roll limit 2500 for testing
 2012-07-11 17:46:06 -07:00
Jason Short
1feaaa4655 Arducopter: Toy mode refinements 2012-07-10 21:53:38 -07:00
Jason Short
293f17902b Arducopter:Arducopter.pde 
switched over to barometer.get_climb_rate() * 100
removed +home.alt calcs since home is always 0 altitude
 2012-07-10 21:53:38 -07:00
Jason Short
c04bff67de Arducopter: Config.h, default gain tweaks from flight tests. 2012-07-10 21:53:38 -07:00
Jason Short
f35b5ba13f Arducopter:test.pde made a note for WP radius that shows m in the printout. 2012-07-10 21:53:38 -07:00
Jason Short
782ebf5176 Arducopter:Log.pde Logging the calculated Climbrate 2012-07-10 21:53:38 -07:00
Jason Short
3048d2f9b4 Arducopter: WP_radius 
Switching to stored WP_radius in meters, just like Arduplane
 2012-07-10 21:53:38 -07:00
Jason Short
0620d86bfd Arducopter:Params 
WP_RADIUS_DEFAULT is now stored the same as Arduplane
 2012-07-10 21:53:37 -07:00
Jason Short
1dbde3f803 Arducopter: Added note 2012-07-10 21:53:37 -07:00
Jason Short
af5423b863 Toy Mode: High Yaw default 2012-07-10 21:53:37 -07:00
Jason Short
19d8c405fd Arducopter : Force home alt to 0 2012-07-10 21:53:37 -07:00
Jason Short
89fec907e2 Arducopter: CH7 Waypoint saving 
Saves the takeoff Waypoint as Home + new altitude rather than current location.
 2012-07-10 21:53:37 -07:00
Amilcar Lucas
dfe0983e1e Merge the changes from APM_Camera branch into ArduCopter 
Conflicts:

	ArduCopter/Camera.pde
	ArduCopter/Parameters.pde
 2012-07-11 00:39:13 +02:00
Andrew Tridgell
be763a6ead ACM: use get_distance_cm() not get_distance() 
this fixes a bug introduced in 28f2eb6b9
 2012-07-11 07:50:07 +10:00
Andrew Tridgell
0f9fb2c64b AHRS: added AHRS_GPS_GAIN parameter 
this allows control of how much GPS velocity information is used in
doing centripetal correction in DCM
 2012-07-10 16:22:48 +10:00
Jason Short
f019d41729 arducopter.pde 
Timer was set =0 at initialization.
 2012-07-09 13:13:32 -07:00
Jason Short
226bba48a6 Toy Mode Yaw Rate fix 2012-07-09 13:13:32 -07:00
Jason Short
cf6d73ec88 commands.pde RTL Alt 
fix to maintain current altitude of we are above our RTL alt for safety.
 2012-07-09 13:13:32 -07:00
Jason Short
038116f521 Airspeed patch: 
pre-calculated airspeed resistance pitches copter automatically to gain a certain speed allowing the speed controller to work off of a better set point - similar to Alt hold.
added param tilt_comp with a default of 54 which equals 19.5° of pitch to go 6m/s
upped Z and Y target speeds to int32_t for speed squared calculation
 2012-07-09 13:13:32 -07:00
Andreas M. Antonopoulos
384365832a ArduCopter: Copied parameter documentation from ArduPlane, where appropriate 2012-07-04 23:33:55 -07:00
Andrew Tridgell
8220ae8096 MAVLink: climb_rate is in m/s 2012-07-05 13:20:26 +10:00
Andreas M. Antonopoulos
fdbb1ebd42 parameter documentation to test auto build 2012-07-04 20:06:12 -07:00
Andrew Tridgell
60caaa4b04 MAVLink: remove MAVLink 0.9 protocol support 
this simplifies the code a lot. We're not going back to 1.0
 2012-07-05 13:00:46 +10:00
Adam M Rivera
857ad6c706 Camera.pde: Implemented gyro based camera stabilization to support continuous servo gimbals. 2012-07-04 21:08:03 -05:00
Adam M Rivera
6e93ab6af6 Parameters: Added flag for camera pitch/roll servos (continuous or regular) 2012-07-04 21:06:21 -05:00
Andrew Tridgell
5ed345fe94 ACM: removed some Location functions which are now in AP_Math 2012-07-04 13:44:36 +10:00
Jason Short
fd97eb5a8d commands 
fixed logic bug to make a copter loiter after the mission is ended.
 2012-07-03 17:38:50 -07:00
Jason Short
37685756df Config.h: 
decreased alt hold_P to .4
removed RTL_AUTO_LAND default
increased alt hold I
 2012-07-03 17:37:37 -07:00
Jason Short
c29a0bc3f8 Navigation 
increased speed governor to get faster WP travel
added param for WP tilt - basically a precalculated I term for wind resistance.
 2012-07-03 17:34:50 -07:00
Jason Short
3a3966736c Params 
Added Tilt_Compensation to Params,
deprecated RTL_Land_Enabeled
RTL_Approach_alt is not int16_t, -1 means do noting. 0 means land, >1 means hover to that altitude after timeout.
 2012-07-03 17:33:03 -07:00
Jason Short
8ccda519fa Arducopter.pde: 
Added note about -1 to disable feature
Set RTL_Atl by default after reaching home in case we're at the wrong alt.
increased speed of Yaw rotation for WPs
 2012-07-03 17:21:46 -07:00
Jason Short
b076b571eb commands_logic: Removed some old unused code 2012-07-03 17:19:19 -07:00
Jason Short
2d572461ec Config: increased WP distance to 2m but default, removed alt hold D: causing issues with APM1 noise. 2012-07-03 17:18:33 -07:00
Jason Short
1070eea70b Log.pde: formatting 2012-07-03 17:16:26 -07:00
Jason Short
1a6549fef7 removed GPS ground speed calc - was causing some funny business during the transition. 2012-07-03 17:16:14 -07:00
Jason Short
c62706ad06 Toy Mode: Yaw performance update. 2012-07-03 17:14:54 -07:00
Jason Short
8a08a74cc6 Config.h : shortening the landing time to 10s 2012-07-02 17:52:38 -07:00
Jason Short
16b25a26c2 Toy Mode: removed virtual WP, copter now just goes into auto_loiter when not holding the sticks. 2012-07-02 17:52:38 -07:00
Jason Short
e0b3309500 Yaw mode: 
Improved hybrid Yaw mode:
- uses rate controller rather than as fast as possible
- waits 1.5 seconds before entering hold
- bounce free
 2012-07-01 13:40:12 -07:00
Jason Short
9a30270879 System.pde - RTL 
removed Approach mode, fixed RTL to loiter until desired altitude is reached
 2012-07-01 13:40:12 -07:00
Jason Short
e35fb9ecd7 Parameters 
removed unused parameters for retro loiter
 2012-07-01 13:40:12 -07:00
Jason Short
3cf16c1424 GCS_Mavlink.pde 
removed Approach define
 2012-07-01 13:40:11 -07:00
Jason Short
ab564b8a86 defines.h 
removed Approach mode enumeration
 2012-07-01 13:40:11 -07:00
Jason Short
3646d69faf read_control_switch 
Removed Prev_WP reference. unneeded.
 2012-07-01 13:40:11 -07:00
Jason Short
8ab1acfb92 Config.h 
Removed Approach delay redundancy - using land timer instead
Removed Retro loiter mode param
 2012-07-01 13:40:11 -07:00
Jason Short
2ad08fdd98 RTL: Commands.pde 
When we are out of commands we land or Loiter at the RTL_Approach_altitude.
 2012-07-01 13:40:11 -07:00
Jason Short
d58ceb2b09 RTL: Commands.pde 
Removed do_approach function - now redundant
 2012-07-01 13:40:11 -07:00
Jason Short
c5617eeeac Arducopter.pde_RTL: 
added a new RTL function that goes into Loiter, first, checks if we have reached RTL_Altitude, then enters WP mode to come home.
Removes Approach mode. Uses Auto_Approach value to decide if we should land or descend to a certain altitude
 2012-07-01 13:40:11 -07:00
Jason Short
2450c25544 Arducopter: enabled RTL_altitude, renamed function to be more accurate 2012-07-01 13:40:11 -07:00
Jason Short
2e8eee9306 Added code for self centering throttle - disabled by default. 2012-07-01 13:40:11 -07:00
Andrew Tridgell
82ede937e7 AnalogSource: convert analogRead() calls to the new API 
this should give us much better analog values, plus save a bunch of
CPU time
 2012-07-01 15:01:05 +10:00
rmackay9
78fa903e17 ArduCopter: updated STABILIZE_ROLL_I to 0.01 (was 0.1) as instructed by Marco 2012-06-30 19:26:14 +09:00
Jason Short
4d6ccccef5 Circle_WP distance check fix 2012-06-29 21:20:28 -07:00
Jason Short
59d16f5fe0 Commands.pde: increased bad WP distance check 2012-06-29 21:20:28 -07:00
Jason Short
eea788b63f navigation.pde : Added a drag/velocity prediction filter for improved I term wind correction. 2012-06-29 21:20:28 -07:00
Jason Short
031830b5fe System.pde: Toy mode details for set_mode() 2012-06-29 21:20:28 -07:00
Jason Short
c276fe8fa0 GCS_Mavlink: added notes to #if malink10 2012-06-29 21:20:28 -07:00
Jason Short
0011190880 defines.h: Toy Mode defines for flight modes 2012-06-29 21:20:28 -07:00
Jason Short
4450d80ea3 Config.h: Optimizing Nav gains 2012-06-29 21:20:28 -07:00
Jason Short
3ce867508b Attitude.pde: Toy mode logic 2012-06-29 21:20:27 -07:00
Jason Short
668135ea8b Arducopter.pde: Added Toy mode refinements 2012-06-29 21:20:27 -07:00
Jason Short
49401bffae Params: Added toy_yate_rate 2012-06-29 21:20:27 -07:00
Jason Short
5e4d28baf0 Added Toy mode to navigation 2012-06-29 21:20:27 -07:00
Jason Short
e036bee424 Aeducopter.pde: Toy mode updates 2012-06-29 21:20:27 -07:00
Adam M Rivera
61baa666c4 commands_process.pde: Bug fix 427. By default, the copter would land after an AUTO mission. Updated to check for valid approach altitude at end of mission. 2012-06-29 21:41:56 -05:00
Andrew Tridgell
55092c25a6 SITL: enable the SIM_* parameters in ArduCopter and ArduPlane 2012-06-29 15:10:52 +10:00
Adam M Rivera
dadc7d5a7d ArduCopter: Loiter Timer should have been set when the approach altitude was set. Previously, land had to be enabled before auto approach would work. 2012-06-28 20:34:53 -05:00
Andrew Tridgell
33440567e6 ACM: ArduCopter updates for new compass interface 2012-06-27 16:01:50 +10:00
Andrew Tridgell
dae1a57dc5 ACM: adapt the ArduCopter code for new barometer interface 2012-06-27 16:01:50 +10:00
Andrew Tridgell
b676caa626 ACM: enable GPS in AHRS for ArduCopter 
this is an experiment in centripetal correction for multicopters
 2012-06-27 16:01:49 +10:00
Jason Short
eeab4c5363 Attitude.pde: Turned off boost_p for nav_throttle based on Testing feedback from Marco. 2012-06-26 10:39:42 -07:00
Jason Short
c76ac4543b Added user editable define for Super simple radius 2012-06-26 10:38:46 -07:00
rmackay9
068fe64b9b ArduCopter HIL: changed calls to setHIL to send in time as a uint32_t (it was a float) 2012-06-26 22:50:17 +09:00
Jason Short
812bf7d874 Attitude.pde - Added small boost to alt hold for takeoff. 2012-06-25 23:12:19 -07:00
Jason Short
46fb3b783a GCS_Mavlink.pde : mav_nav only used in legacy Mavlink. 2012-06-25 23:08:25 -07:00
Jason Short
cd93c40f09 Added Toy Mode control 2012-06-25 23:08:25 -07:00
Jason Short
807c4ced34 Added Toy Mode defines 2012-06-25 23:08:25 -07:00
Jason Short
80d15368bc Arducopter.pde : Added Approach mode, added "Toy" mode fun code I'm playing with. 
Added landing code to make landing happen closer to home loc
Added check for distance to Loiter WP before overriding a new Loiter position.
Moved calc_loiter_pitch_roll() to 50 hz.
removed the nav_bearing var - not used with new crosstrack.
 2012-06-25 23:08:25 -07:00
Jason Short
7f92d702ab commands.pde: fixed unit error for distance check 2012-06-25 23:06:28 -07:00
Jason Short
a0dc1f7ab1 Config.h : New Gains based on testing, new Crosstrack gain. from 1.0 to .2 because of new algorithm 2012-06-25 23:06:28 -07:00
Jason Short
c71c503c84 GCS Mavlink.pde: change reference to nav_bearing to target_bearing. 2012-06-25 23:06:28 -07:00
Jason Short
53d2a46cd6 Navigation.pde : removed old cross tracking from Arduplane. Added new 2D cross tracking. Added use of GPS velocity when above 1.5m/s 2012-06-25 23:06:28 -07:00
Jason Short
92d481c08c inertia.pde: WIP don't fly with inertia enabled until FN. 2012-06-25 23:06:28 -07:00
Jason Short
28829b0d60 Log.pde: removed nav_bearing reference and replaced with target_bearing ref 2012-06-25 23:06:28 -07:00
Andreas M. Antonopoulos
bef005b5f2 AC2.6: Fix battery calculation and scaling bug for MAV1.0, now same as ArduPlane 
http://code.google.com/p/arducopter/issues/detail?id=430
 2012-06-24 17:01:25 -07:00
Robert Lefebvre
1064dcbd34 Open up constraint on Rate Yaw Output for all copters. 2012-06-22 10:06:01 -04:00
Jason Short
7e0708ca36 Config.h - returned low to original 120 2012-06-20 15:22:35 -07:00
Jason Short
839b8865aa Parameters.h: throttle_min and throttle_max now have defaults from Config.h 2012-06-20 15:02:00 -07:00
Jason Short
efdf0a7fc8 changed define to a param for throttle_min and throttle_max 2012-06-20 15:00:53 -07:00
Jason Short
e8510faf5d changed define to param for throttle_min 2012-06-20 15:00:05 -07:00
Jason Short
6020f6d9fa Added throttle_min as a user definable param 2012-06-20 14:58:34 -07:00
Jason Short
4f18e7f80b lowered minimum throttle 2012-06-20 08:47:47 -07:00
Jason Short
27e0aee03f Small fix to angle boost - increases by about 20% to deal with inefficiencies of non-downward thrust 2012-06-20 08:47:47 -07:00
Jason Short
39a253a273 decreased I term based on the tests last weekend in high winds 2012-06-20 08:47:47 -07:00
Jason Short
8b212d8baa Adjustments to the Inertial_nav 
lowered Rate_I and Rate_P to be less jumpy. raised throttle_p
added a clear to rate when entering loiter
moved the raw reporting
 2012-06-20 08:47:47 -07:00
Andrew Tridgell
58379b928f MAVLink: make usage of MAVLink defines more consistent 2012-06-15 16:27:11 +10:00
rmackay9
c62cc4844e ArduCopter: updated firmware to simply 2.6 (i.e. removed Epsilon) ahead of the release 2012-06-15 00:42:59 +09:00
Jason Short
e31a1d969f Inertial Nav disabled by default 2012-06-13 22:37:52 -07:00
Jason Short
c42f9ece43 Inertial Control 
I added inertial navigation based on the simulator data. This is an option only available if you compile with Arduino and set
#define INERTIAL_NAV ENABLED
in the APM_Config.h file.

This has been tested for one real flight and did not crash my quad, but consider it very alpha. The quad may be unpredictable at first until the error correction fixes poorly calibrated accels. Be Careful.

Most of the real work is in the inertia file, but the error correction, new variable defines and calibration calls are sprinkled throughout.

The Log should record RAW messages with special debugging values.
 2012-06-13 22:34:45 -07:00
rmackay9
65050775e1 ArduCopter: made Robert's new yaw method optional (off by default). 
Add this line to APM_Config.h to enable Robert's yaw
#define ALTERNATIVE_YAW_MODE ENABLED
 2012-06-13 21:50:16 +09:00
Jason Short
ff0659535e Raised the Max throttle to 1000, min to 200. Worked good in SIM with Tridge's motor safety patch. 2012-06-12 13:58:49 -07:00
rmackay9
e1acf21381 ArduCopter: updated firmware version to 2.6 Epsilon 2012-06-12 23:22:57 +09:00
rmackay9
c6f1d93849 ArduCopter: updated standard loiter pids. 
Loiter_P (speed from distance to target) = 0.2 (was 0.35)
Loiter_Rate_P (lean angle from desired acceleration) = 2.4 (was 2.5)
Loiter_Rate_I = unchanged at 0.08
Loiter_Rate_D = 0.40 (was 0.45)
 2012-06-12 20:56:31 +09:00
Jason Short
f5a85d48a0 Added Angel's name to contrib list 2012-06-10 12:38:22 -07:00
Andrew Tridgell
940d994efb GPS: Use appropiate GPS_ENGINE settings in APM, ACM and rover 2012-06-10 16:36:18 +10:00
rmackay9
aeaebb21d5 ArduCopter: updated firmware version to 2.6 Delta ahead of the next round of testing (and hopefully soon a release) 2012-06-08 21:54:09 +09:00
Andrew Tridgell
a684bddbda GPS: open the GPS serial port with a 256 byte buffer 
the UBLOX needs more than 128 bytes for reliable parsing
 2012-06-08 16:42:03 +10:00
Robert Lefebvre
c5916a8b4d Opening up the Yaw Rate constraint for Trad Heli. 2012-06-07 22:40:25 -04:00
Robert Lefebvre
e2496181ff Yaw Fix 
Modified Nav_Yaw controller to better track intended heading changes.
 2012-06-07 17:15:33 -04:00
Jason Short
a9610a0761 Stabilization patches 
removed Angle error limit for stabilization
constricted Iterm to +- 5° error and limited the implementation to when the quad is +- 5° from center
doubled the output limit for Rate controller.
increased default Rate_P gain to .18 with matching Rate_D of .004
Tested in the SIM and in backyard. dramatically increases performance and quad no longer overshoots and flips when pushed hard.
 2012-06-05 16:41:44 -07:00
rmackay9
70b04d9427 ArduCopter: updated firmware description to 2.6 Gamma 2012-06-05 21:28:13 +09:00
Andrew Tridgell
8b258e23e7 ACM: prevent link flood with "Low Battery" warnings 
thanks to Marco for noticing this
 2012-06-05 11:31:40 +10:00
Michael Oborne
14be88dd55 AC: add hilstate message 2012-06-04 16:24:08 +08:00
Jason Short
71f80f3a77 Bug fix: When adjusting altitude, RTL then land will fail unless this var is reset to false. 2012-06-03 22:25:27 -07:00
Jason Short
1b9f75c844 Updates to Flip: 
Ability to abort flip mode if things go wrong
init function to re-enter flip mode if aborted
 2012-06-03 22:15:19 -07:00
Andrew Tridgell
7c63d2c17b ACM: MAVLINK10 uses HIL_STATE 
thanks to Michael for noticing this
 2012-06-04 13:31:07 +10:00
Andrew Tridgell
e7cf643386 added mavlink09 targets 
allows easier building with mavlink0.9
 2012-06-04 13:14:52 +10:00
Andrew Tridgell
3f4e87cccc ACM: fixed HIL build for MAVLINK10 2012-06-04 13:14:52 +10:00
Michael Oborne
9303a89573 fix AC hil build 2012-06-04 11:12:52 +08:00
Michael Oborne
a71ed6c5ce enable mavlink10 by default 2012-06-04 08:02:08 +08:00
Jason Short
15aea320cb Added note to remove this unused param 2012-06-03 11:13:50 -07:00
Jason Short
12ab875d58 using current PWM rather than a re-read of the PWM. 2012-06-03 11:13:50 -07:00
Jason Short
9ab06c5542 Moved PID logging counter into define 2012-06-03 11:13:50 -07:00
rmackay9
72d76558a7 ArduCopter: Ensure update_GPS does nothing when gps is disabled. 
This fixes a bug in which an APM without a GPS would not work because it would constantly scan for a valid GPS long after it should have given up and moved on.
 2012-06-03 23:48:45 +09:00
rmackay9
fd6b21d0c7 ArduCopter: updated firmware version to 2.6Beta in preparation for beginning of testing 2012-06-03 17:02:35 +09:00
rmackay9
4544b37fec ArduCopter: updated firmware version to 2.6Beta in preparation for beginning of testing 2012-06-03 16:59:23 +09:00
rmackay9
dcdeae412e ArduCopter: Another attempt at fixing the lat/lon printing bug in which small negative lattitudes or longitudes were appearing as positives. 
Fixed in both ArduCopter Log.pde and the GPS Auto test sketch
 2012-06-03 16:58:19 +09:00
rmackay9
2a216ce900 ArduCopter: fixed print_latlon bug in which it would print negative lat/lon numbers incorrectly (i.e. -1234567890 would be printed as -124.xxx). 2012-06-02 12:51:12 +09:00
Jason Short
c2d14a5cad RC_Channel fix for throttle output. 
throttle was outputting incorrectly and allowing the user to max out the throttle leaving nothing for attitude control
 2012-05-31 14:59:03 -07:00
Robert Lefebvre
5f058fb9b2 TradHeli: Incorporating Ext ESC Control 2012-05-30 21:50:25 -04:00