Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
5,423 Commits 71 Branches 509 Tags 714 MiB
Commit Graph

1520 Commits

Author SHA1 Message Date
rmackay9 0efb0e5b4d ArduCopter - added CH6_STABILIZE_KD tuning value 2012-03-29 21:09:41 +09:00
rmackay9 599cea21bb Added multiple new tuning parameters to the inflight channel 6 tuning feature: 
#define CH6_YAW_KI 24
        #define CH6_ACRO_KP 25
        #define CH6_YAW_RATE_KD 26
        #define CH6_LOITER_KI 27
        #define CH6_LOITER_RATE_KI 28
 2012-03-28 23:58:58 +09:00
Andrew Tridgell 34506b170f Mavlink: fixed warnings about limits on int32 values 2012-03-27 15:37:25 +11:00
Andrew Tridgell e0c9ab5a29 ACM: fixed heli build 2012-03-27 15:37:25 +11:00
Andrew Tridgell 47f9dfd125 ACM: fixed the build on the 1280 2012-03-27 15:37:24 +11:00
Andrew Tridgell e956e21e7d ACM: enable the new compass offset nulling in ACM 2012-03-27 15:37:24 +11:00
rmackay9 1f4cfb9333 ArduCopter - added PID log type. Implemented for Yaw stabilize and rate controllers. 2012-03-25 16:09:08 +09:00
rmackay9 67cf7b9eed ArduCopter - updated firmware version to 2.5.3 2012-03-25 09:13:51 +09:00
rmackay9 63b96c0153 ArduCopter - altitude hold - ensure throttle_avg is initialised from g.throttle_cruise parameter 2012-03-23 23:48:24 +09:00
rmackay9 89576a281a ArduCopter - updated to firmware version to 2.5.2 to avoid confusion with post 2.5.1 versions posted to downloads area 2012-03-23 23:12:49 +09:00
Robert Lefebvre 84d8414a2e Fix Auto_Trim to allow it to actually be called when setup on Ch7 pulldown menu in MP. 2012-03-23 09:17:58 -04:00
Jason Short e2560c5865 Throttle_hold was in APM_Config - which is ignored by the Mission planner Hex generator 2012-03-22 10:01:24 -07:00
rmackay9 ad4a2aa9f3 ArduCopter - motors_quad.pde - corrected test sequence for + configuration 2012-03-21 22:04:50 +09:00
rmackay9 66c4f752e3 ArduCopter - navigation - corrected comment in check_missed_wp function to clarify that you've passed the waypoint when the direction to the way point is more than 100 degrees off (not 10 degrees off) from your original bearing towards the waypoint 2012-03-20 17:11:22 +09:00
rmackay9 1dd554c333 ArduCopter - updated version to 2.5.1 2012-03-20 17:08:18 +09:00
rmackay9 0773a25b5d ArduCopter - increased default THROTTLE_CRUISE to 450 2012-03-20 16:34:07 +09:00
rmackay9 22315cd41a ArduCopter - Navigation.pde - corrected comment re wp_distance and get_distance to clarify that they are in cm (not meters!) 2012-03-20 16:13:38 +09:00
Andrew Tridgell 458d55e5bc MAVLink: constrain variable changes to the datatype range 
if someone tries to set a AP_Int16 to a value of 300000, they now get
32767 instead of -27678
 2012-03-19 17:29:02 +11:00
Andrew Tridgell 547b4ed55b AHRS: adapt ArduCopter for new AHRS framework 2012-03-19 17:29:02 +11:00
Jason Short c5344a2a85 ACM: Arducopter.pde - Added a constraint to the NO_NAV mode to be similar to the Loiter and rate nav modes. 2012-03-18 22:31:22 -07:00
Jason Short a0717f082e ACM: Attitude.pde - consolidated wind I term resets 2012-03-18 22:31:21 -07:00
Jason Short fe7ca98701 ACM: system.pde - removed reset_nav_I() to consolidate the wind control reset. 2012-03-18 22:31:21 -07:00
rmackay9 9841cb0335 ArduCopter - small change to ensure both roll and pitch commands are zero before switching out of loiter_override (loiter override becomes true when roll+pitch command is greater than 5 degrees and switches back to false when both become zero) 
- remove incorrect comments about when loiter target position is reset.
 2012-03-18 15:16:04 +09:00
rmackay9 dc92da818c ArduCopter - remove reference to AUTO_RESET_LOITER that is not used anymore 2012-03-18 14:53:19 +09:00
rmackay9 91b2b48fd8 ArduCopter - bug fix to calc_XY_velocity (was using uninitialised last_longitutde and last_latitude for speed calculations) 2012-03-18 12:11:12 +09:00
Jason Short 491af02d8a ACM: Lowered gains from flight tests today with 3DR Quad 2012-03-17 11:04:01 -07:00
Jason Short 427dacba70 ACM: Smoother Speed calcs 2012-03-16 14:10:19 -07:00
Jason Short 3038da1dc3 ACM: Softer Loiter Gains 2012-03-16 14:10:19 -07:00
Jason Short 48a0c9a818 ACM: Small fix to nav_throttle to prevent too fast of a landing. 2012-03-16 14:10:19 -07:00
Jason Short 6201bdb8a7 ACM: Fixed comment 2012-03-16 14:10:19 -07:00
Jason Short 1c0b28c956 Fixed Scaling bug in Sonar mixing 2012-03-16 14:10:19 -07:00
Jason Short 7153b94ade ACM: Disabled D term experiment for Loiter until more testing 2012-03-15 19:20:03 -07:00
Jason Short a52a14bf12 Tune down Loiter_P a hair 2012-03-15 19:17:27 -07:00
Robert Lefebvre be3fe36c52 Small fix on the Traditional Helicopter Collective-Yaw compensation calculation. 2012-03-15 20:14:18 -04:00
rmackay9 68e37774a6 ArduCopter - removed #define AUTOMATIC_DECLINATION ENABLED line to ensure users don't try and enable it because it needs a bit more work before it's ready for general use 2012-03-15 21:58:42 +09:00
analoguedevices 86eff20d5d Rev'ed version number to 2.5. Added more credits 2012-03-15 02:38:54 +00:00
Jason Short 6f8b97bf6a ACM: Added constraints for invalid climb rates. Robert Lefebvre had a bad sonar and very invalid rates crept into the system. 2012-03-13 21:31:16 -07:00
Jason Short 4315c06f34 Lowering the D filter for less latency and less oscillation. 2012-03-13 12:58:46 -07:00
Jason Short 48ba24a810 ACM: Loiter tuning updates, turned up I a bit, a higher I will work better if the system is well tuned. 2012-03-13 10:23:31 -07:00
Jason Short 468d9c4b4f ACM: Loiter D performance updates 2012-03-13 10:23:31 -07:00
Jason Short 7953808d14 ACM: Larger filter for Loiter D 2012-03-13 10:23:30 -07:00
Jason Short 7034b709d1 ACM: removing old define 2012-03-12 13:11:30 -07:00
Jason Short 73e2bd6cd8 ACM: Got the sign wrong. I'm using the derivative of the error now and not the sensor, so the sign was reversed. 2012-03-12 13:11:05 -07:00
Jason Short 0b51d9b8b0 ACM: Made Loiter_D 0 by default. Accidentally left it on by default. 2012-03-12 10:37:15 -07:00
Jason Short deed802d1a ACM: Broke out the D term for the PID loop to add custom filtering. The current AC_PID filtering wasn't working for this application and we needed more smoothing. Bad pitch oscillations were being transmitted to the copter. 2012-03-11 23:21:49 -07:00
Jason Short b3795f1c00 ACM: removed Filtering code for motors in Quad for testing 2012-03-11 23:21:49 -07:00
Jason Short a989b88680 ACM: made same as Loiter I 2012-03-11 23:21:49 -07:00
Jason Short 0d434ca92c ACM: Tuning based on flights today 2012-03-11 23:21:49 -07:00
Jason Short 0ab6b6e592 ACM: Rate_d filter for PID loop of Loiter. 2012-03-11 23:21:49 -07:00
Jason Short 77fe7de55d ACM: The I term in update_nav_wp with the no_nav condition was pulling from the wrong PID loop and was essentially 0 all the time. 2012-03-11 23:21:49 -07:00
rmackay9 a869a01294 ArduCopter - Log.pde - added wrap_360 to compass heading field of ATT message to resolve overflow problem that caused heading to appear as being off by 70 degrees 2012-03-12 12:09:04 +09:00
Andrew Tridgell 2a03a0584f AP_Declination: disable library when AUTOMATIC_DECLINATION is not ENABLED 
unfortunately this library was causing avrdude to fail to load the hex
to my APM2. Until we work out why, it's disabled.
 2012-03-11 21:46:41 +11:00
Adam M Rivera d3667faef4 AP_Declination: Added call to compass.set_initial_location if the compass is enabled when the 3D fix is obtained. 
Signed-off-by: Andrew Tridgell <tridge@samba.org>
 2012-03-11 20:59:47 +11:00
Adam M Rivera 2524f9c8df AP_Declination: Added new config value to allow the user to have the declination overwritten on every 3D fix. 
Signed-off-by: Andrew Tridgell <tridge@samba.org>
 2012-03-11 20:59:47 +11:00
Jason Short 62c2aa4924 ACM: Added Loiter D tuning 2012-03-10 14:17:57 -08:00
Jason Short cb8729109c ACM: Added Loiter_D for tuning as #23 2012-03-10 14:17:16 -08:00
Jason Short 0671bb9168 ACM: Firmware rev 2012-03-10 12:45:03 -08:00
Jason Short f9d0dc9daa ACM: disabled auto_calibration until more testing can be done 2012-03-10 12:44:49 -08:00
Jason Short 5ad7320505 ACM: changed alt hold initialization of altitude to be immediate 2012-03-10 12:44:18 -08:00
Jason Short 450f89ec5d ACM: Added note about scaling rates 2012-03-10 12:43:28 -08:00
Jason Short eb53200179 ACM: Altered the scaling speed for altitude changes for faster rises. 2012-03-10 12:43:01 -08:00
Jason Short 204f9957b0 ACM: Added force_new_altitude call to do immediate changes in altitude and no gradual changes. 2012-03-10 12:42:22 -08:00
Jason Short 83729d0f75 ACM: decreased rate P for alt hold to remove bumpy repsonse 2012-03-10 12:41:06 -08:00
Jason Short 220d5a1c6e ACM: Increased the altitude error P for smoother alt hold response 2012-03-10 12:40:44 -08:00
Jason Short 4b703e8842 decreased the loiter rate P for overshoot 2012-03-10 12:40:07 -08:00
Jason Short fc32da0d2e ACM: increased the available rate error constrain, it was too low 2012-03-10 12:39:16 -08:00
Jason Short bd4835a1b2 ACM: removed the experiment for rate error. 2012-03-10 12:38:29 -08:00
Jason Short 29d6085bab added Force_new_altitude call for alt hold 2012-03-10 12:37:54 -08:00
Jason Short 4ba600c0c5 upped throttle manual boost to 225 2012-03-10 12:37:28 -08:00
rmackay9 afc4aceb32 ArduCopter - fixed small compile warning about unused x_iterm and y_iterm in navigation.pde 2012-03-11 01:27:58 +09:00
rmackay9 c7480f2281 ArduCopter - fix to dataflash logging of Mag heading 2012-03-11 01:27:29 +09:00
Andrew Tridgell d75e883fe8 GCS: get_integrator() is now get_gyro_drift() in DCM 2012-03-10 10:34:33 +11:00
Andrew Tridgell 9a06d35772 make 'ENABLE' and 'ENABLED' mean the same things 
users get this wrong far too often!
 2012-03-10 10:34:33 +11:00
Andrew Tridgell 828ad7625b ACM: removed the ADC filtering code 2012-03-10 10:34:32 +11:00
Andrew Tridgell 1016d3c95d ACM: removed quaternion special cases in CLI code 2012-03-10 10:34:31 +11:00
Andrew Tridgell 8393c0299b ACM: removed the DCM tuning overrides 
not needed now that DCM scales with deltat
 2012-03-10 10:34:31 +11:00
Andrew Tridgell 7291dfc25a ACM: removed the special case for quaternions in GCS code 2012-03-10 10:34:31 +11:00
Andrew Tridgell d6cfc51ae4 ACM: no need to fetch offsets at startup 
AP_Param handles this
 2012-03-10 10:34:31 +11:00
Andrew Tridgell ef771fecdc ACM: removed a lot of the special case code for quaternions 2012-03-10 10:34:31 +11:00
Andrew Tridgell 69c29d35ce ACM: change DCM loop to 100Hz 
On my APM2 quad this seems to give better results
 2012-03-10 10:34:31 +11:00
Andrew Tridgell 2596acc8eb ACM: removed incorrect mode definition 2012-03-10 10:34:30 +11:00
Andrew Tridgell 7a9b3d3388 Quaternion: show "Quaternion test" on startup if enabled 2012-03-10 10:34:29 +11:00
Andrew Tridgell 7e4c8592ff ACM: make it possible to build ArduCopter with quaternions 2012-03-10 10:34:29 +11:00
Andrew Tridgell 9bff4e2c4c ACM: only call the fast loop if the imu has new data 
this prevents us spinning waiting for the sensors to gather some data
 2012-03-10 10:34:29 +11:00
Andrew Tridgell 367947fd33 HWSTATUS: if we don't know the voltage, report it as zero 
this will tell us if board_voltage() is really working
 2012-03-10 10:34:28 +11:00
Andrew Tridgell 64cc04ae09 ACM: adjust yaw drift correction constants 
this should give the compass a bit more authority
 2012-03-10 10:34:28 +11:00
Andrew Tridgell a0ce202d87 ACM: added SIMSTATE, DCM and HWSTATUS messages to ACM 2012-03-10 10:34:27 +11:00
Jason Short 486c56ce41 Consolidated Barometer pressure sensing to a single filter based on Randy's new filter class. 2012-03-08 23:13:04 -08:00
Jason Short c8e9d57567 temp remove filter for quad motors during testing. It's unlikely this filter did anything at all to be honest. 2012-03-06 22:23:06 -08:00
Jason Short 730476fdfd ACM - 
Implemented automatic ranging of Alt Hold gains. Works well in simulator and testing.
- alt hold estimation moved to 50 hz
- simple fixed observer calc for smooth and accurate climb rates useful for derivative calcs
- auto-reset of the I term by moving I value into throttle value. This recalcs the gain every 20seconds for battery drainage compensation in long flights.
- remove filtering for Nav_throttle
- added a way to lower the gain on nav_throttle for descents by / climb_rate error by 2 - seems to work OK and keeps copter from dropping like a rock when the Baro drifts quickly lower.
- removed old throttle hold set point code
- made throttle override for alt hold +- 200 vs 250
 2012-03-06 22:22:14 -08:00
Jason Short c26eb6afcc ACM: Updated config values 2012-03-06 22:12:24 -08:00
rmackay9 8b256cf924 ArduCopter - fix for stability patch and motor filter meant to deal with engines tendency to speed up faster than they slow down 2012-03-06 23:20:30 +09:00
rmackay9 72a775cc2a ArduCopter - fixed typo in motor filtering for octa, octa_quad and y6 that is suppose to correct for props speeding up faster than they slow down. 2012-03-06 22:19:19 +09:00
rmackay9 706bea5992 ArduCopter - added OCTA_QUAD_FRAME to comments in APM_Configh.h to help user select frame when compiling with arduino 2012-03-06 22:15:02 +09:00
Jason Short 46d7da4d14 Added define for throttle range for altitude changes, updated it to 250 2012-03-05 22:12:53 -08:00
Robert Lefebvre a480b32400 Added support for TradHeli H1 swashplate type. Added new param heli_h1_swash_enabled. 
Signed-off-by: Robert Lefebvre <robert.lefebvre@gmail.com>
 2012-03-03 08:14:14 -05:00
Andrew Tridgell 0ff44563ec ACM: use g.rc_speed for all APM_RC.SetFastOutputChannels calls 2012-03-02 17:57:08 +11:00
Andrew Tridgell 0fc646d666 ACM: set default RC fast speed to 400Hz 2012-03-02 17:57:08 +11:00
Andrew Tridgell e213f6780e ACM: added RC_SPEED MAVLink parameter 
this will set the speed for APM_RC.SetFastOutputChannels()
 2012-03-02 17:57:08 +11:00
Andrew Tridgell f781bd735b ACM: fixed Parameters.h to avoid duplicate keys 
unfortunately everyone needs to reload
 2012-03-02 15:48:28 +11:00
Andrew Tridgell cb874d6097 ACM: added board_voltage() 2012-03-02 15:48:28 +11:00
Robert Lefebvre e49c2d2871 Rescale TradHeli roll_out and pitch_out into the min and max ranges to provide linear motion across the input range instead of stopping when the input hits the constrain value. These calculations are based on an assumption of the user specified roll_max and pitch_max coming into this equation at 4500 or less, and based on the original assumption of the total g.heli_servo_x.servo_out range being -4500 to 4500. 
Signed-off-by: Robert Lefebvre <robert.lefebvre@gmail.com>
 2012-03-01 22:04:50 -05:00
Jason Short 7c09e4a5e6 added stab_d gain scheduling - off by default 2012-02-28 20:16:40 -08:00
Jason Short a387956814 added stab_d gain scheduling 2012-02-28 20:16:40 -08:00
Jason Short ceef8070ac added stab_d gain scheduling 2012-02-28 20:16:40 -08:00
Jason Short b76c4ecb22 added stab_d gain scheduling 2012-02-28 20:16:40 -08:00
Jason Short efdf6ee79f added option for stab_d gain scheduling 2012-02-28 20:16:40 -08:00
Jason Short ca34d7b7c2 Added test for stab_d gain scheduling. 2012-02-28 20:16:40 -08:00
Pat Hickey 16ed16f403 Cleanup: rm ArduCopter/GCS_Mavlink\ copy.txt 
* Not needed, but we can always checkout an old version if it is.

Hi Pat,
This may have been my WIP for the Mavlink 1.0 conversion. I tried to
give Tridge a head start on it. I've made small updates to it in
parallel to the current Mavlink. You can delete it as he would have used
it by now if he felt it was helpful.

Jason

On Feb 28, 2012, at 4:08 PM, Pat Hickey wrote:

It looks like this file was checked in by accident, possibly, but you've
made a few small changes to it since creating it.

Is it important? Should we get rid of it?

Git log of file below.

Thanks
Pat
...
 2012-02-28 16:28:27 -08:00
Pat Hickey ff0fc26484 Cleanup: rename files with spaces in their names, replace with underscores 
* Skipped /Tools/ArdupilotMegaPlanner/Resources/new...
  and /archive/Configurator/Source/Utilities/TDMS/G...
  because I don't want to mess with that.
 2012-02-28 16:14:31 -08:00
Robert Lefebvre 76c3cd88f0 Added heli_collectiveFactor array 
Signed-off-by: Robert Lefebvre <robert.lefebvre@gmail.com>
 2012-02-28 10:49:28 -05:00
rmackay9 744e5b8c60 ArduCopter - made rate controller filters globals to fix compiler error on Arduino 022 (Arduino 1.0 was fine) 2012-02-28 22:56:26 +09:00
rmackay9 4a0989f95d ArduCopter - Attitude.pde - updated get_rate_roll and get_rate_pitch to use new average filter. 
modified all int to int16_t in Attitude.pde
 2012-02-28 21:26:37 +09:00
rmackay9 17d94b61ed ArduCopter - modified to work with new Filter library 2012-02-28 21:02:44 +09:00
Jason Short ba68d6d8a1 Set loiter rate enabled by default 2012-02-26 12:29:28 -08:00
Jason Short e06d8142c1 Added OPtion for non-rate based loiter 2012-02-26 11:33:37 -08:00
Jason Short 6e53949c2a removed Constraint that caused JLN's horizontal drift. 2012-02-26 11:33:37 -08:00
Jason Short 517172ba20 Added Loiter Rate Tuning 2012-02-26 11:33:37 -08:00
Jason Short 0ce0c7c262 Added Loiter_rate_tuning 2012-02-26 11:33:36 -08:00
Jason Short eac77504a3 Added more Logging for PIDs. 2012-02-26 11:33:36 -08:00
rmackay9 8193c786ef ArduCopter - added #include <Filter.h> to unbreak the build! 2012-02-26 17:05:41 +09:00
rmackay9 69132e0fe7 ArduCopter - change sonar to use new mode filter from Filter library 2012-02-26 15:35:14 +09:00
Jason Short f27e9f9ca1 added a simple rest of nav_throttle just in case 2012-02-25 13:31:21 -08:00
Jason Short cc5ab4aebf increased speed of alt hold I term based on Jani's Logs 2012-02-25 13:31:21 -08:00
Jason Short 1ce267f904 increased the rate error for more responsive alt hold 2012-02-25 13:31:21 -08:00
Jason Short a924c3685e Based on Jani's latest logs I've made two tweaks to alt hold. 
The first is to remove the filter on the throttle output for alt_hold.

The second was to open up the constraint on climb rate. This is to deal with larger than expected disturbances causing altitude changes.
 2012-02-25 13:31:21 -08:00
Andrew Tridgell e2bbc795ad ACM: use a NULL gps pointer in DCM init 
current DCM API does need a GPS reference passed in, but it can be
NULL
 2012-02-25 15:08:49 +11:00
Andrew Tridgell 0248b48d30 allow MAG_ENABLE to be changed in flight 
this disables the compass in DCM if MAG_ENABLE is changed in
flight. Without this we would use a fixed yaw once the compass is
disabled

This also makes sure we don't pass the compass to DCM till we have
done a read. This ensures we have a good compass fix for the initial
DCM heading
 2012-02-25 14:51:09 +11:00
Andrew Tridgell 864ed1a87f ACM: check the return of compass.init() 
if the compass fails to initialise then don't pass it to DCM, or we
will get no yaw control. Report the init failure to the user.
 2012-02-25 14:51:08 +11:00
Andrew Tridgell 698749dd92 ACM: don't pass a gps pointer to DCM 
after discussion with Randy, we don't want ArduCopter to fall back to
GPS for yaw when the compass becomes unhealthy. So we shouldn't pass
the gps object to the DCM code at all.
 2012-02-25 14:51:08 +11:00
Andrew Tridgell 690dc9052a GCS: force scalar type in copy_name() 
this enables access to compass offsets over MAVLink
 2012-02-25 11:37:20 +11:00
Andrew Tridgell 2e9105c68a AP_Param: added special handling for Vector3f 
We would like to be able to use Vector3f as a parameter while exposing
the individual elements of the vector as MAVLink parameters. This
change to AP_Param makes that possible, by giving AP_Vector3f a dual
personality
 2012-02-25 11:37:20 +11:00
Jason Short 1e254cbca0 Compass heading added to ATT log 2012-02-24 12:11:15 -08:00
rmackay9 57e5eee8c8 TradHeli - increase max yaw input to 45 degrees 2012-02-24 20:18:40 +09:00
Jason Short 385828824d updated Gains for Marco's loiter test 2012-02-23 22:03:26 -08:00
Jason Short 24345d4f43 Loiter updates 2012-02-23 22:03:26 -08:00
Andrew Tridgell 1cd3172954 ACM: ensure update_trig() doesn't cause NAN values for cos_roll/cos_pitch 
the DCM matrix could have a value over 1.0 for c.x due to rounding
errors
 2012-02-24 11:52:55 +11:00
Jason Short 364afe8da0 added a constraint to D term 2012-02-23 09:14:44 -08:00
Andrew Tridgell 95ef9206dc DCM: renorm_sqrt_count is now called renorm_range_count 2012-02-23 08:16:08 +11:00
Jason Short c7c16a5b0f Emile's Fixes 2012-02-22 10:27:34 -08:00
Jason Short 4483f19f85 Marco's Hexa Motors 2012-02-22 09:55:44 -08:00
Jason Short 242f54793c revved a version 2012-02-22 09:00:42 -08:00
Jason Short 729c824809 made timer unsigned 2012-02-21 21:49:03 -08:00
Jason Short 42b5d47f7b commented out control mode debug print 2012-02-21 21:48:07 -08:00
Jason Short 30efbae0e9 removed old comments 2012-02-19 14:21:27 -08:00
Jason Short 265c5255a3 Added slow_wp default in AP mode 2012-02-19 13:15:40 -08:00
Jason Short 336441b109 reset slow_WP option at mode switch 2012-02-19 13:13:42 -08:00
Jason Short 81a861c8ac Added slow wp option in calc_desired_speed 2012-02-19 13:13:21 -08:00
Jason Short 33d4d52a6b set Slow WP option for RTL in Auto mode 2012-02-19 13:12:23 -08:00
Jason Short cae49b3543 Added "slow WP" option for RTL. 2012-02-19 13:11:59 -08:00
Jason Short b54d08f410 Updated manual throttle control during throttle hold 2012-02-19 12:40:51 -08:00
Jason Short bcd5129f9b added workaround for resetting alt. 2012-02-19 12:40:08 -08:00
Jason Short fa32b084bd Added SW test for Manual Boost 2012-02-19 12:39:40 -08:00
Randy Mackay 9fabdb5797 TradHeli - change throttle range back to 0~1000 (was temporarily changed to be 1250~850 which limited the range of the swash plate's vertical movements) 2012-02-20 00:27:12 +09:00
Randy Mackay e146f225b1 ArduCopter - remove unnecessary block for next GPS value before saving home location 2012-02-19 15:38:40 +09:00
Andrew Tridgell df8a557630 AP_Param: update users of AP_Param for ParamToken 2012-02-19 17:05:28 +11:00
Andrew Tridgell 12327eb2a9 Heli: fixed some 'used before initialised' warnings 2012-02-19 16:34:43 +11:00
Jason Short 028de5d2c5 Axis lock beta (off by default) 2012-02-18 21:16:19 -08:00
Jason Short 885710fce6 updated max throttle define 2012-02-18 21:14:13 -08:00
Jason Short 05024cc06c Change 800 to a define 2012-02-18 21:13:28 -08:00
Jason Short 04b70ffdc2 added Axis_Lock params 2012-02-18 21:13:06 -08:00
Jason Short ff2b4ecb7a updated throttle range 2012-02-18 21:11:06 -08:00
Jason Short 1e37a0ec17 added a limit to range output 2012-02-18 21:08:17 -08:00
Jason Short 1b46daa12e some better defaults for JDrones 2012-02-18 14:23:21 -08:00
Randy Mackay b92d7aaad5 ArduCopter - fix for yaw control on Octa Quad Plus frame. 2012-02-18 22:04:09 +09:00
Randy Mackay 232359186e TradHeli - fixed small parameter bug affecting helis. The servo parameters were declared as GSCALAR instead of GGROUP in Parameters.pde. 
also renamed heli parameters from _coll_ to the more descriptive _collective_
 2012-02-18 20:57:51 +09:00
Randy Mackay b64c0da003 ArduCopter - updated version to 2.4 2012-02-18 18:44:29 +09:00
Andrew Tridgell 6929226b96 ACM: expanded EEPROM parameter area by 256 bytes 2012-02-18 10:51:57 +11:00
Andrew Tridgell 718a5b70e3 AP_Param: fixed saving of sensor calibration 
this fixes the saving of the accel and gyro calibration to EEPROM,
which was initially broken by the AP_Param conversion
 2012-02-18 10:51:57 +11:00
Jason Short b532cb91b1 added Rate_D tuning value 2012-02-17 15:23:59 -08:00
Jason Short 0075901f77 upped rate loop to 250hz 2012-02-17 15:23:59 -08:00
Jason Short 5218220f0f re-implemented WII Dampening filter for Marco. 2012-02-16 22:38:23 -08:00
Jason Short b052dab80d Adjusted gains to move closer to Marco's tests 2012-02-16 22:19:39 -08:00
Jason Short 17c6c7b294 added extra gain logging 2012-02-16 22:09:22 -08:00
Jason Short 908ca4e915 scaled X velocity 2012-02-16 22:09:22 -08:00
Jason Short bc1593e89c cast to float 2012-02-16 22:09:21 -08:00
Jason Short 632cc783a1 cast D term to float just in case 2012-02-16 22:09:21 -08:00
Jason Short 36a120d8df removed some unused vars, 
formatting, made loop speed same as PIDT1 to eliminate variable.
 2012-02-16 22:09:21 -08:00
Jason Short a43ee36bee CH 6 Range setup 2012-02-15 11:47:54 -08:00
Jason Short 3d63bb6cd4 Added acro_p to the params 2012-02-15 11:29:25 -08:00
Jason Short e8b6f5ecee allow auto-land if failsafe is triggered 2012-02-15 10:53:54 -08:00
Jason Short fabeccad4a Marco's updated Motor testing code 2012-02-15 10:49:35 -08:00
Jason Short 73591a0ca5 Added lengthy note about motor testing 2012-02-15 10:49:11 -08:00
Jason Short 9a3e862b55 added option in code for Loiter specific gains 2012-02-15 09:10:15 -08:00
Jason Short e249c8466d AP slew rate 2012-02-15 09:10:15 -08:00
Jason Short 21856e7696 new defaults for params 2012-02-15 09:10:15 -08:00
Jason Short fcb24ee17d Added Acro_P 2012-02-15 09:10:14 -08:00
Jason Short 574b86b02e synced params 2012-02-15 09:10:14 -08:00
Jason Short 91edeeeef2 added RTL_land_enabled 
added auto_pilot slew rate
 2012-02-15 09:10:14 -08:00
Jason Short aa0662008b Added new params for CH6 Tuning 
moved enums to give more room for additional PIDs for Loiter
added new Acro_P gain
added auto_land_enabled option
added pi_loiter_lon and pi_loiter_lat for separate tuning of loiter
 2012-02-15 09:10:14 -08:00
Jason Short 05abe44f32 Added range setting via a parameter for CH6 tuning 2012-02-15 09:10:14 -08:00
Jason Short c9b432955d removed unused Vars 2012-02-13 15:25:23 -08:00
Jason Short 4faba2048c Lowered for Jani 2012-02-13 15:25:23 -08:00
Andrew Tridgell ecdbfd257a token is 16 bits now 2012-02-13 16:22:53 +11:00
Andrew Tridgell d55a0c3a71 added AP_Param::show_all() 
this moves the logic into common code
 2012-02-13 16:22:52 +11:00
Andrew Tridgell 0f9adbdae0 token size for first()/next() is now 16 bits 2012-02-13 16:22:52 +11:00
Andrew Tridgell 617082769a go back to 1024 bytes for variables in EEPROM 2012-02-13 16:22:52 +11:00
Andrew Tridgell 0b3e3ec5c8 added group indexes to GCS_MAVLINK class 2012-02-13 16:22:52 +11:00
Andrew Tridgell d4305e0ae2 fixed apm2beta build with AP_Param 2012-02-13 16:22:52 +11:00
Andrew Tridgell 16417b651e the ACM parameters have a max size of 1114 bytes 
to ensure that all parameters can be saved, expand parameter area by
256 bytes
 2012-02-13 16:22:52 +11:00
Andrew Tridgell 3b4cae3cc3 adapted main ACM code for AP_Param 2012-02-13 16:22:52 +11:00
Andrew Tridgell c9c422539e update ACM MAVLink code for AP_Param 2012-02-13 16:22:52 +11:00
Andrew Tridgell a2d0900460 fixed warning in Log build 2012-02-13 16:22:52 +11:00
Andrew Tridgell bf1eb670e3 update main parameter code for AP_Param in ACM 2012-02-13 16:22:52 +11:00
Andrew Tridgell f1a41b041f log: fixed some integer size errors 
need to be careful with the types passed to printf()
 2012-02-12 20:38:37 +11:00
Pat Hickey 306a3bb4f9 Makefile: extra convenience target for apm2hexa 2012-02-11 16:05:51 -08:00
Pat Hickey 84dd0d2fda ArduCopter Hexa output_motor_test: individually select all 6 motors 
* each of the 6 hexacopter motors can be selected individually
  by moving the joystick to extremes.

* previously, this was built from the quadcopter output_motor_test
  and some motors (left/right motors on +, front/back motors on X)
  were only selectable as pairs.
 2012-02-11 16:05:51 -08:00
Pat Hickey 739317276d ArduCopter setup motors: print basic instructions. 2012-02-11 16:05:51 -08:00
Pat Hickey 6573cec611 ArduCopter APM_Config.h: add sample custom channel config 
* uses new config variables introduced in 8a19543fd1e09621ba
 2012-02-11 16:05:51 -08:00
Pat Hickey 470fd8788e ArduCopter Channel Config: config vars for user override of MOT_n mapping 
* config variable CONFIG_CHANNELS has possible values
  CHANNEL_CONFIG_DEFAULT or CHANNEL_CONFIG_CUSTOM
* config_channels.h only provides APM1/APM2 mapping when
  CONFIG_CHANNELS == CHANNEL_CONFIG_DEFAULT
 2012-02-11 16:05:51 -08:00
Jason Short 2c65fc9ddf Cosmetic tweaks for tuning 2012-02-11 15:29:11 -08:00
Jason Short 0a63f104ab Gain adjustments for 3d frame. 2012-02-11 15:29:11 -08:00
Jason Short 969ac70000 reset All for Auto takeoff 2012-02-10 22:54:29 -08:00
Jason Short b1d52da431 reset Rate_I for takeoff 2012-02-10 22:50:56 -08:00
Jason Short efce991bfb upped max target speed to center of loiter 2012-02-10 22:46:27 -08:00
Jason Short 8ae53bffd2 Made Yaw Hold universal for Acro 2012-02-10 22:32:55 -08:00
Jason Short dc15fe4c5d Moved to Rate_I by default for Jani to test 2012-02-10 22:32:55 -08:00
Jason Short c64d781dce get_acro_yaw added 2012-02-10 22:32:55 -08:00
Jason Short 19ab0f481e made Yaw work like Roll and Pitch 2012-02-10 22:32:55 -08:00
Jason Short 9f8d7d5076 Minimize the Yaw Deadzone 2012-02-10 22:32:55 -08:00
Jason Short 50aaa09348 Up Nav_Rate_P 2012-02-09 22:38:36 -08:00
Jason Short 62627e9b57 reverted to Save_WP now that CH7 triggering is fixed 2012-02-09 22:33:01 -08:00
Jason Short 3afaf2689c Fix for disabled CH7 value triggering WP saving 2012-02-09 22:32:04 -08:00
Jason Short 4313d19bc5 2.3.1v 2012-02-09 22:22:01 -08:00
Jason Short 71d57a5371 Enabled PWM test 2012-02-09 22:22:01 -08:00
Jason Short b315e23bbd Found missing Break in Switch statement. 2012-02-09 22:22:01 -08:00
Jason Short 2335b74bc3 faster FS timer 2012-02-09 22:22:00 -08:00
Jason Short c35ad2d493 Loiter update - removed compensation curve. Did some more math and its's not worth the effort, harder to tune. 2012-02-09 22:22:00 -08:00
Jason Short 6848dc17e5 Added safety to prevent shutdown of motors during Auto-land 2012-02-09 22:22:00 -08:00
Jason Short f40d40b0f9 Acro fix - we had lost the scaling of Acro mode in 2.1. This restores that. 2012-02-09 22:22:00 -08:00
Randy Mackay fe7a0a97ab ArduCopter - CH7 - changed default to CH7_DO_NOTHING 2012-02-09 20:26:01 +09:00
levinemax 345a23273e Motor mix update for X8 (octo quad), 
diagrams:
http://wiki.ardupilot-mega.googlecode.com/git/images/APM1/ACM-X8_APM14.jpg
http://wiki.ardupilot-mega.googlecode.com/git/images/APM2/FRAMES_X8.jpg
 2012-02-09 03:57:40 +00:00
Randy Mackay 3517964e14 ArduCopter - Camera.pde - turn off camera pitch control (which uses channel 6) when channel 6 is being used for tuning. 2012-02-08 23:51:53 +09:00
Randy Mackay 70f91e3cc3 Arducopter - reduced rate of decent when landing using sonar 2012-02-08 22:46:32 +09:00
Randy Mackay f1a129c8ea ArduCopter - Log.pde - fixed Log_Read_Control_Tuning so that it doesn't read too many bytes. Also fixed up some comments 2012-02-05 16:56:51 +09:00
Randy Mackay 498970a948 TradHeli - tiny fix for yaw_offset. Yaw_offset is used to proactively counteract rotational force caused by changing the collective pitch (i.e. rapidly climbing or decending). There was a small bug for when the collective pitch is negative (i.e. powered decent) in which case the offset was in the incorrect direction. 2012-02-05 11:04:38 +09:00
Andrew Tridgell 1a861b3de5 allow for lower serial baud rates 
not many people will use less than 9600 baud, except for those wanting
to test extreme range radios, which is what I'm trying to do :-)
 2012-02-04 19:07:18 +11:00
Jason Short ef9418c2de fix issue with low throttle in air 2012-02-03 13:29:59 +00:00
Michael Oborne 151479f769 fix issue 502 
to identify quad over mavlink
 2012-02-03 06:53:08 +08:00
Pat Hickey dad4ee92e5 Revert all changes to ArduCopter Motors MOT mappings. 
Revert "Arducopter Motors Octa: Change V frame MOT_ output ordering."

This reverts commit bdab02f408ddc5451fcb4c6390b2475d31ac657f.

Revert "hexa frame FRAME_CONFIG fixup"

This reverts commit d15e692df613cb728ec671a54dce166f6f1940a0.

Revert "Arducopter Motors Octa: revert OCTA_V_FRAME back to part of OCTA_FRAME"

This reverts commit cb0a8c62fbd07a8ae9dcb8d4fffce337ace1aa1c.

Revert "Arducopter Motors Hexa: Change ordering of MOT designations in Plus frame"

This reverts commit 120d7f9050d5ec9f8fbe02c0ed4f38621949f4ee.

Revert "Arducopter Motors Hexa: Revert HEXA_PLUS_ and HEXA_X_ to single HEXA_FRAME"

This reverts commit 7d65ec311fd2e1222a36d0b34c366e21f3869fcc.

Revert "Arducopter Frames: revert to old HEXA_FRAME and OCTA_FRAME defines."

This reverts commit 47c6e8662f4d5e8fb920f2049338541343d8d18e.

Revert "Add Max's changes for new MOT mappings. Defines new FRAME_CONFIG types."

This reverts commit 8259c90ec7cb29dedac19890cd9a4449b7399e36.
 2012-02-01 10:14:46 -08:00
analoguedevices 3288b518c0 credits 2012-02-01 04:44:36 +00:00
analoguedevices 6dbcac855a Incremented version number to 2.3 2012-02-01 04:39:15 +00:00
Pat Hickey 36389cdbd8 ArduCopter Octa: fix yaw motors for Octa V. 
* I based this off the APM1 Octa V diagram at
  http://code.google.com/p/arducopter/wiki/AC2_Multi
 2012-01-31 19:37:49 -08:00
Pat Hickey 6a333b743a Arducopter Motors Octa: Change V frame MOT_ output ordering. 
* I backed this out from Max's changes, but I'm not sure whether its correct.
 2012-01-31 18:19:41 -08:00
Pat Hickey 7ca81bd2c9 hexa frame FRAME_CONFIG fixup 2012-01-31 18:19:41 -08:00
Pat Hickey a24f89fb6d Arducopter Motors Octa: revert OCTA_V_FRAME back to part of OCTA_FRAME 2012-01-31 18:19:41 -08:00
Pat Hickey 0735c2b62f Arducopter Motors Hexa: Change ordering of MOT designations in Plus frame 
* This will change the output order for APM2, but not APM1.
 2012-01-31 18:18:13 -08:00
Pat Hickey dbd1cc6a9f Arducopter Motors Hexa: Revert HEXA_PLUS_ and HEXA_X_ to single HEXA_FRAME 2012-01-31 18:18:13 -08:00
Pat Hickey b245265669 Arducopter Frames: revert to old HEXA_FRAME and OCTA_FRAME defines. 
* HEXA_X_FRAME and HEXA_PLUS_FRAME merged back into HEXA_FRAME
* OCTA_V_FRAME merged back into OCTA_FRAME
 2012-01-31 18:18:13 -08:00
Pat Hickey 0e9294538b Add Max's changes for new MOT mappings. Defines new FRAME_CONFIG types. 
* HEXA_FRAME has been eliminated and changed to HEXA_X_FRAME and
  HEXA_PLUS_FRAME
* OCTA_FRAME stays the same name for X and +, but the V frame
  configuration requires new OCTA_V_FRAME name.
 2012-01-31 18:18:13 -08:00
Randy Mackay b851d39eaa OptFlow - reenable OF_LOITER pid controller and reduce I term 2012-02-01 08:04:18 +09:00
Jason Short 21bd48b6c3 Loiter PIDs 2012-01-30 21:13:03 -08:00
Jason Short 8aaf88e13b tweaks to Loiter 2012-01-30 21:13:03 -08:00
Jason Short 90099d4a42 ATT tuning update 2012-01-30 21:13:03 -08:00
Jason Short f225efef9f tuning 2012-01-30 21:13:03 -08:00
Jason Short 08a9249e2b cosmetic 2012-01-30 21:13:03 -08:00
Jason Short 5934b503b8 tuning fixes 2012-01-30 21:13:03 -08:00
Jason Short 31614c39dd Cosmetic 2012-01-30 21:13:03 -08:00
Jani Hirvinen 009e87105f Minor changes for PID for jDrones motors due latest changes on control laws. 2012-01-31 09:00:31 +07:00
Jason Short 23709bafef pid_nav_lat incorrectly labeled 2012-01-29 23:02:00 -08:00
Jason Short a3862ced62 cosmetic 2012-01-29 21:55:17 -08:00
Jason Short 46e08fb46a Added more attributions 2012-01-29 21:53:44 -08:00
Jason Short ae65a0f03f removed filter. Don't need it. 2012-01-29 17:10:52 -08:00
Jason Short bf2cc6072d limiting alt hold rate error to 1m/s 2012-01-29 17:08:34 -08:00
Jason Short 02aacc454b Lowering the throttle_P values by default 2012-01-29 16:27:13 -08:00
Jason Short 650c0ed3f1 made Loiter over ride exit dependent not on speed, but centered sticks. 2012-01-29 16:15:02 -08:00
Randy Mackay 693a2cfdcd TradHeli - fix to servo limits. They had been unnecessarily limited to the collective pitch's min and max but actually there are cases (for example when the swash is leaning over 45degrees) where one servo goes well beyond the collective pitch's min or max. 2012-01-29 21:14:37 +09:00
Randy Mackay 974c825f4a Optflow - minor fix to D term defaulting 2012-01-29 21:06:41 +09:00
Jason Short 67cd412105 Landing update for better baro landing 2012-01-28 22:35:57 -08:00
Jason Short 5ab37a346c reduce test.pde size for 1280 users 2012-01-28 22:16:24 -08:00
Jason Short 7833cea9d4 2.2B6 - Please verify Heli still functions properly. 
Added AC_PID lib
Updated landing code
bug fixes
 2012-01-28 22:00:05 -08:00
Jason Short 295631139a formatting 2012-01-28 21:19:46 -08:00
Jason Short d1fcebb5ca Cosmetic changes 
GPS LED lock waits for home_is_set to be true
 2012-01-28 21:19:46 -08:00
Jason Short 326a663c6b changed tuning range 2012-01-28 21:18:43 -08:00
Randy Mackay f3a95ff3cb Arducopter - Tri - move yaw servo (channel7/motor7/CH_TRI_YAW) to mid point on startup 2012-01-28 10:13:58 +09:00
Randy Mackay 122623f64b OpticalFlow - added OF_LOITER flightmode 2012-01-28 09:27:16 +09:00
Pat Hickey 1dcd50e3be ArduCopter Tri: fix for enable_out of yaw servo, defined yaw servo for APM2 2012-01-27 07:39:01 -08:00
Randy Mackay 8dee001657 Sonar - changed default pin to A0 2012-01-26 22:50:48 +09:00
Pat Hickey 6c03307217 ArduCopter Heli: add motors_output_enable function 2012-01-25 22:41:09 -08:00
Randy Mackay 2c906b7b27 OpticalFlow - replaced PI controller with PID controller. 
Modified optical flow hold to use aggregated position instead of speed.
 2012-01-25 21:55:14 +09:00
Randy Mackay 4434ddf389 Optical flow - updated standard frame rate to 2000hz and increased resolution to 1600cpi 2012-01-25 21:53:20 +09:00
Jason Short 25529dec69 added loiter_d to allow users to configure alternate Loiter alg 2012-01-22 14:19:27 -08:00
Jason Short 74daadb252 Revert "test to switch loiter controls" 
This reverts commit 92270371d038f246d535f0ace9fc19272c44291d.
 2012-01-22 14:19:27 -08:00
Jason Short 6476ba22f2 test to switch loiter controls 2012-01-22 12:28:34 -08:00
Pat Hickey 89e11afc09 ArduCopter: Call APM_RC.enable_out for camera channels in init_camera() 2012-01-22 12:03:11 -08:00
Pat Hickey 98a90d0352 ArduCopter: Call motors_output_enable at correct spot during init 2012-01-22 12:03:11 -08:00
Pat Hickey 04a3112f33 ArduCopter: Add implementation of motors_output_enable to each motors_ frame type 2012-01-22 12:03:11 -08:00
Jason Short dd1e08a7e0 Causes Aero_SIM to fail 2012-01-22 09:34:43 -08:00
Jason Short 1d9783652a added Beta 4 tag 2012-01-21 22:15:23 -08:00
Jason Short 60e3508f7c converted to cm 
Signed-off-by: Jason Short <jasonshort@mac.com>
 2012-01-21 22:14:08 -08:00
Jason Short aace39e65c Converted distance gains to CM 
added loiter_d for rate control, equal to old Nav_P gain
 2012-01-21 22:13:57 -08:00
Jason Short fffa1af3b3 Fixed speed governor which was letting speed get to 0. 
added Loiter_d to replace Nav_P for rate control
wp_distance calc now returns CM
 2012-01-21 22:12:57 -08:00
Jason Short f638a4b81d recording nav_bearing rather than target bearing 
recording x and y speed rather than Iterms for nav since they are always 0 now
 2012-01-21 22:10:28 -08:00
Jason Short 2fa24e0557 added conversions of CM to M 2012-01-21 22:09:39 -08:00
Jason Short 7edd16e5fe Added Loiter_D to replace Nav_P for better separation of loiter and navigation tuning. 
Upped Nav_P defaults to 3 based on windy flight testing
Added minimum WP speed define of 1m/s
Upped loiter_I for better wind performance - was not seeing any overshoot in logs
Made Nav_I default of 0, since we are not using it in the code.
 2012-01-21 22:09:13 -08:00
Jason Short 59d1f225d5 convert command into CM from M 
Making Landing boost be one at minimum to trigger better navthrottle output
 2012-01-21 22:06:35 -08:00
Jason Short f3cc1121aa better default for speed governer 2012-01-21 22:05:48 -08:00
Jason Short 5cc19bbe7c slightly less filtering for less latency 2012-01-21 22:04:54 -08:00
Jason Short 9003b95499 Converted to cm for distance 2012-01-21 22:04:35 -08:00
Jason Short 8cb645f3c2 increasing the velocity near WP 2012-01-21 11:59:49 -08:00
Jason Short 1aa6d0ea08 limiting the pitch throttle compensation 2012-01-21 11:59:49 -08:00
Jason Short ab5716c42d Calc error for logs 2012-01-21 11:59:49 -08:00
Jason Short 7c25253422 Enabled auto throttle hold 2012-01-20 22:52:31 -08:00
Jason Short 7fb641ab77 added note 2012-01-20 22:52:31 -08:00
Jason Short fb72ecd4e4 formatting 2012-01-20 22:52:31 -08:00
Jason Short 127544b833 Added cast for comparison 2012-01-20 22:52:30 -08:00
Jason Short 42b1362bba cleanup 2012-01-20 22:52:30 -08:00
Jason Short 5ac26a5500 error on comparison operator 2012-01-20 22:52:30 -08:00
Jason Short 5180592913 Added Auto_land_timeout to params 2012-01-20 22:52:30 -08:00
Jason Short c190f83bb0 AutoLanding timeout for Mission Planner 2012-01-20 22:52:30 -08:00
Jason Short a22596fb33 Max throttle output was to high 2012-01-20 22:52:30 -08:00
Jason Short 19053bb725 Updated Firmware version 2012-01-20 22:52:30 -08:00
Jason Short f5fd3a0597 reset all I terms at Arming 2012-01-20 22:52:30 -08:00
Jason Short 287ffb5fb4 enabled Mavlink Land command 2012-01-20 22:52:30 -08:00
Jason Short 6784989e83 relocated reset_I term functions to central location 2012-01-20 22:52:30 -08:00
Jason Short d2c78d2b75 Stab_D changes units with the new dampening controller updates 
Stabilize roll is raised to .1 - Flies great, and avoids a slow oscillation that could be affecting loiter.
Loiter P lowered to 1.5 based on feedback
 2012-01-20 22:52:30 -08:00
Jason Short 932869b686 renamed function 2012-01-20 22:52:30 -08:00
Jason Short 43365fe802 Verify land updates from JLN 
Effectively a throttle control for landing that mimics a person lowering the throttle.
 2012-01-20 22:52:29 -08:00
Jason Short ed32ad30fd Refined the D term for stabilize 
moved all the rest_I terms from code into 1 central place
 2012-01-20 22:52:29 -08:00
Jason Short 5141534ea9 B3 2012-01-20 22:52:29 -08:00
Jason Short db6db1ab91 set dampening range from 0 - .08 from 0 to .6. The new dampening code has changed units. 
added the ability to force nav_throttle so we  don't get ground effects screwing up baro sensor.
Added more descriptive Rest_I functions
 2012-01-20 22:52:29 -08:00
Jason Short 6e94b21d67 Altitude no longer resets when moving loiter WP 2012-01-20 22:52:29 -08:00
Jason Short 85f10589b2 slowed down slightly 2012-01-20 22:52:29 -08:00
Jason Short 017364fc5b Lowered range to more sensible values 2012-01-20 22:52:29 -08:00
Jason Short 2831ff9148 Off by default 2012-01-20 22:52:29 -08:00
Michael Oborne 3142a75913 AC fix attitude level hil 2012-01-21 07:52:52 +08:00
Michael Oborne 95f58b0432 fix scale error 2012-01-21 06:33:18 +08:00
Michael Oborne 1bebb9452b AC sync battery code with arduplane 2012-01-21 06:29:09 +08:00
Michael Oborne 52a9bb3cd1 fix SITL attitude hil AC 2012-01-20 16:32:25 +08:00
Doug Weibel ed9f7cb1b6 Update battery monitoring code for ArduCopter 
Fixes compatibility for APM2.  Also a significant update to the battery monitoring code:  We previously had monitoring modes for individual cell voltages for 3 and 4 cell lipos.  These have been removed as they were never really supported (the cell voltages were computed but were not reported or recorded anywhere).  Also, some clean-up/prep work was done for supporting monitoring 2 separate battery packs.  The CLI battery and current monitoring tests were consolidated into 1 test.
changed
 2012-01-15 17:10:02 -07:00
Doug Weibel 0306bf97a0 Just a little more commenting work on global variables 2012-01-15 16:11:02 -07:00
Jason Short e2c2a453a8 APM2 Channel assignments 2012-01-15 10:24:16 -08:00
Jason Short 3ebed0b278 This allows users to test the Auto_throttle hold or cruise value 2012-01-14 11:43:52 -08:00
Jason Short 46ef246e67 b2 2012-01-14 11:37:00 -08:00
Jason Short 0ae82da0fd Fix for SIMPLE mode 2012-01-14 11:32:48 -08:00
Jason Short 72faa6525e Tweak to make circle mode scripting more accurate 2012-01-14 11:21:50 -08:00
Jason Short 89343ae306 adjusted GPS watch dog not to be so aggressive, 
removed unneeded flag clearing
 2012-01-14 11:20:40 -08:00
Jason Short 95ac9d163e lowered Loiter I, commented out unused var 2012-01-14 11:20:40 -08:00
Jason Short c02b403a06 temp removed alt D term until more testing 2012-01-14 11:20:40 -08:00
Jason Short 1843798697 Clarified the Increment for WP total 2012-01-14 11:20:40 -08:00
Jason Short f97d58c753 added notes, removed redundant save wp_total 2012-01-14 11:20:40 -08:00
Jason Short 7877a872d3 added update throttle cruise function 2012-01-13 16:48:05 -08:00
Jason Short 1269b07d9a Made RTL always the current Altitude 2012-01-13 16:47:38 -08:00
Jason Short ec9880f725 made resetting throttle cruise a function 2012-01-13 16:47:08 -08:00
Jason Short 6591089110 Disabled Ryans filter until we get real-world testing in. 2012-01-13 12:48:02 -08:00
Jason Short 8d909f6eed fixed GPS bug - moved to fast loop location 2012-01-13 12:47:22 -08:00
Jason Short c327a9f000 made landing shoot for below home by 2 meters to avoid bounce up. 2012-01-13 12:46:40 -08:00
Jason Short 7c475f178c tuned down Alt hold D gain 2012-01-13 09:36:51 -08:00
Jason Short 4eacc6f3eb re-enabled relay test 2012-01-13 08:55:02 -08:00
Jason Short ee7c948781 Added simple constrain for Alt d term 2012-01-13 08:49:55 -08:00
Jason Short b0810e054e moved GPS routines to 50hz loop to avoid delay. 2012-01-12 22:59:47 -08:00
Jason Short 648a404ee1 Version 2.2 2012-01-12 22:37:33 -08:00
Jason Short 91e05834c8 removed wind comp code, 
Added Landing boost code
 2012-01-12 22:28:58 -08:00
Jason Short 4459fc4e34 Added a small D term on alt hold 2012-01-12 22:28:58 -08:00
Jason Short 6b85adb460 Added Landing throttle control to force down the copter 2012-01-12 22:28:58 -08:00
Jason Short 154411c96c removed unused defines 
lowered default Loiter gain
 2012-01-12 22:28:58 -08:00
Jason Short 569ff5046f Added Ryan's GPS lag filter 
Removed unused code
refined alt change
 2012-01-12 22:28:58 -08:00
Jason Short a59c9ae22c added notes 2012-01-12 22:28:58 -08:00
Doug Weibel 9846822748 Bug fix for compass. 
This is a fix for an interesting bug when a DCM matrix reset was added to the ground start.  This bug only showed up if (A) a ground start were performed after an air start or due to use of the "Calibrate Gryo" action, (B) if the current orientation were sufficiently different from 0/0/0, and (C.) if the particular magnetometer had sufficiently large offsets.  Why did resetting the DCM matrix to 0/0/0 pitch/roll/yaw at ground start cause a bug?  The magnetometer offset nulling determines the proper offsets for the magnetometer by comparing the observed change in the magnetic field vector with the expected change due to rotation as calculated from the rotation in the DCM matrix.  This comparison is made at 10Hz, and then filtered with a weight based on the amount of rotation to estimate the offsets. Normally it would take considerable time at normal in-flight rotation rates for the offset estimate to converge. 

If a DCM matrix reset occurs when the offset nulling algorithm is up and running, the algorithm sees the DCM reset as a instantaneous rotation, however the magnetic field vector did not change at all.  Under certain conditions the algorithm would interpret this as indicating that the offset(s) should be very large.  Since the "rotation" could also have been large the filter weighting would be large and it was possible for a large erroneous estimate of the offset(s) to be made based on this single (bad) data point.

To fix this bug methods were added to the compass object to start and stop the offset nulling algorithm.  Further, when the algorithm is started, it is set up to get fresh samples.  The DCM matrix reset method now calls these new methods to stop the offset nulling before resetting the matrix, and resume after the matrix has been reset.
 2012-01-12 14:44:24 -07:00
analoguedevices 70b7951366 Eliminated second instance of APM2 #defines 2012-01-12 20:38:41 +00:00
Jason Short a7bce15365 R10 2012-01-11 22:41:51 -08:00
Jason Short 99ea69ef7b New Loiter control 2012-01-11 22:41:51 -08:00
Jason Short 257890d5be New Loiter Gains for new Loiter methods 2012-01-11 22:41:51 -08:00
Jason Short 98f637282b moved to verify_land 2012-01-11 22:41:51 -08:00
Jason Short 5e9db462f5 attempting to force down without using Manual boost. 2012-01-11 22:41:51 -08:00
Jason Short f35411ac45 R9 2012-01-10 23:46:08 -08:00
Jason Short 84e001594d comma 2012-01-10 23:45:33 -08:00
Jason Short 4b54887c6c Switched to set_next_WP for mode switches 2012-01-10 23:43:44 -08:00
Jason Short 6b836d1a09 Fixed Type Error 2012-01-10 23:43:44 -08:00
Jason Short c4476bdd80 Fixed type error 2012-01-10 23:43:44 -08:00
Jason Short 3e8ff39d4b Climb rate control 2012-01-10 23:43:44 -08:00
Jason Short a79d302b98 added set_new_altitude call() 2012-01-10 23:43:44 -08:00
Jason Short e102cb9e6a Added ending for auto landing 2012-01-10 23:42:27 -08:00
Jason Short 3a5ffc252d updated climb rate control 
Land detector
 2012-01-10 23:42:27 -08:00
Jason Short acd877abda added set_new_altitude call 2012-01-10 23:42:27 -08:00
Jason Short f36aba8af2 climb rate control 2012-01-10 23:42:26 -08:00
Jason Short 5a91396f63 Added climb rate control 
removed unused vars
 2012-01-10 23:42:26 -08:00
Jason Short dab4fb43d4 Added altitude change flags 2012-01-10 23:42:26 -08:00
Jason Short 351be7c305 Made timer unsigned 2012-01-10 23:42:26 -08:00
Jason Short 7b8767d846 Added comments 2012-01-10 23:42:26 -08:00
Jason Short b1e971ea18 added location error calc to get better data. Otherwise we'll be 1 GPS read off. 2012-01-10 23:42:26 -08:00
Jason Short 5f55780b5e Added comments 
moved out failsafe check. otherwise the reporting was erroneous.
 2012-01-10 23:42:26 -08:00
Jason Short 92f7b22722 Moved failsafe check to more logical place 2012-01-10 23:42:26 -08:00
Jason Short cf92631d33 added #if to wind compensation code 2012-01-10 23:42:26 -08:00
Pat Hickey fc6321b7ca ArduCopter motors_y6: rewrite CH_ macros with MOT_ macros 2012-01-09 22:06:49 -08:00
Pat Hickey 927e60d85b ArduCopter motors_y6: rewrite loop in terms of motors 2012-01-09 22:06:49 -08:00
Pat Hickey ac7f6a5602 ArduCopter motors_tri: rewrite CH_ macros with MOT_ macros 
* Third Tricopter motor was on CH_4, so it is called MOT_4. This
  will be changed in a subsequent commit.
 2012-01-09 22:06:49 -08:00
Pat Hickey 73610ddb6c ArduCopter motors_octa_quad: rewrite remainder from CH_ macros to MOT_ macros 2012-01-09 22:06:48 -08:00
Pat Hickey 7f4c994346 ArduCopter motors_octa_quad: rewrite loop in terms of motors 2012-01-09 22:05:01 -08:00
Pat Hickey e2be119433 ArduCopter motors_octa: rewrite remainder from CH_ macros to MOT_ macros 2012-01-09 21:57:02 -08:00
Pat Hickey 46b8037a73 ArduCopter motors_octa: rewrite janky loops to use ch_of_mot 
* Previously the loop was written over channels, now it is over motors
* the correct channel for that motor is determined by ch_of_mot.
* ch_of_mot is defined correctly based on the config_channels macros.
 2012-01-09 21:57:02 -08:00
Pat Hickey 79030a84b8 ArduCopter motors_hexa: rewrite remainder from CH_ macros to MOT_ macros. 2012-01-09 21:57:02 -08:00
Pat Hickey f7e14fff37 ArduCopter motors_hexa: rewrite janky loops to use ch_of_mot 
* Previously the loop was written over channels, now it is over motors
* the correct channel for that motor is determined by ch_of_mot.
* ch_of_mot is defined correctly based on the config_channels macros.
 2012-01-09 21:57:02 -08:00
Pat Hickey b907c1fd5c ArduCopter: add ch_of_mot lookup to motors.pde 2012-01-09 21:57:02 -08:00
Pat Hickey 7535c1c3fe ArduCopter test.pde: translate from CH_ to MOT_ notation 2012-01-09 21:57:02 -08:00
Pat Hickey 6a4442557c ArduCopter setup.pde: translate from CH_ to MOT_ notation 2012-01-09 21:57:02 -08:00
Pat Hickey 91bc2698a8 ArduCopter radio.pde: translate CH_ to MOT_ outputs 2012-01-09 21:57:02 -08:00
Pat Hickey 2f63c636ad Rename ArduCopter/config_motors.h to config_channels.h 2012-01-09 21:57:02 -08:00
Pat Hickey f5b6746ad7 ArduCopter: Change TRI_FRAME yaw servo output to CH_TRI_YAW define 2012-01-09 21:57:02 -08:00
Pat Hickey c105f64dca ArduCopter Camera.pde: changed from CH_n to CH_CAM_ notation. 2012-01-09 21:57:02 -08:00
Pat Hickey e0e430895e motors_quad: translate from CH_ to MOT_ notation. 2012-01-09 21:57:02 -08:00
Pat Hickey 0b40f55334 ArduCopter: include config_motors.h in sketch 2012-01-09 21:57:01 -08:00
Pat Hickey e5e8ed8a54 ArduCopter config_motors.h: stubs in for CH_CAM_PITCH and CH_CAM_ROLL 2012-01-09 21:57:01 -08:00
Pat Hickey 9eae2ec7fe ArduCopter config_motors.h: proper defs for APM1 MOT_[5..8] 2012-01-09 21:57:01 -08:00
Pat Hickey a30558e9b2 ArduCopter config.h: add standard ifndef/define header macro wrappers 2012-01-09 21:57:01 -08:00
Pat Hickey a7628b7f78 ArduCopter: add config_motors.h with MOT_n to CH_m mapping 
* APM1 values are not valid, but hopefully APM2 will stay that way?
 2012-01-09 21:57:01 -08:00
Pat Hickey a19afd926a APM_RC & ArduCopter: Change interface to SetFastOutputChannels to use _BV 
* Every use of MSK_CH_n changed to _BV(CH_n)
* Easier to read, and will allow CH_n to be parameterized without needing
  a separate macro expansion for the MSK value.
 2012-01-09 21:57:01 -08:00
Jason Short 78255b722e Slowed Auto Descent 
Don't return true in Landing code to prevent flyways in Stabilize
 2012-01-08 23:01:22 -08:00
Randy Mackay f68d23d91e ArduCopter - added ROLL_PITCH_STABLE_OF (i.e. Stabilised Roll/Pitch + adjustments based on optical flow) 
Removed optical flow from regular loiter for now until it's tested.
 2012-01-09 13:53:54 +09:00
analoguedevices d46f36e624 Put in commented-out APM2 #defines, to save people the trouble of having to type them in themselves 2012-01-09 01:59:55 +00:00
Jason Short d45c0ce9f2 Added Acro to Rate_P 2012-01-08 14:52:10 -08:00
Randy Mackay 3dfa26920f ArduCopter - changed Sonar to use A1 (was AN4) 2012-01-08 17:48:30 +09:00
Jason Short f4b530ebb1 R8 2012-01-07 22:28:03 -08:00
Jason Short 48c211e055 Added finish to missions - auto-land or stabilize 2012-01-07 22:27:26 -08:00
Jason Short 9c8122e061 converted auto land to use the mission planner version 
Removed gate that looked for already set control_mode. Wasn't compatible with failsafe
 2012-01-07 22:27:26 -08:00
Jason Short 63be9c5f7b Moved wind comp into a define 2012-01-07 22:27:26 -08:00
Jason Short 06e032db68 Quad frame - X is default 
added wind comp stability option to config - off by default
 2012-01-07 22:27:26 -08:00
Jason Short 6678edf243 Auto-land updates - removed sonar option - not needed 
updates from JLN
 2012-01-07 22:27:26 -08:00
Jason Short 76dd79e7b5 Made RTL hold position until it reaches altitude 2012-01-07 22:27:26 -08:00
Jason Short dd42f06275 Cleanup 2012-01-07 22:27:26 -08:00
Jason Short faa9dd43cf scaled to 0-1023 2012-01-06 21:43:37 -08:00
Jason Short ee0551037e Revved to R7 2012-01-06 10:22:53 -08:00
Jason Short 98f9a5f237 Forced Faildafe throttle mode to throttle Auto 2012-01-06 10:21:50 -08:00
Jason Short 5b66a09688 Added check for armed motors in failsafe 2012-01-06 10:21:23 -08:00
Jason Short c9f60f239d Added Note 2012-01-06 10:20:59 -08:00
Jason Short 8f3c577e47 Made RTL go up 10m for failsafe 2012-01-06 10:20:48 -08:00
Jason Short 17873eb09c Changed default throttle type for failsafe to avoid checking 
changed timer to 20 seconds.
 2012-01-06 10:20:31 -08:00
Jason Short e116636fe9 Auto_land update 2012-01-05 21:57:34 -08:00
Jason Short e3c16fc1b1 Added auto_land to RTL 2012-01-05 21:15:12 -08:00
Jason Short 40ad164c8d Clears Auto_land timer 2012-01-05 21:15:12 -08:00
Jason Short 20661e5020 timer set to unsigned 2012-01-04 17:31:20 -08:00
Andrew Tridgell df81a9459a ACM: reset all I terms on gyro calibration 2012-01-05 10:15:14 +11:00
Andrew Tridgell 2913948520 ACM: fixed a warning 
comment out some unused debug code
 2012-01-05 10:14:53 +11:00
Andrew Tridgell c1c3115b42 ACM: fixed a alt hold bug 
== instead of =
 2012-01-05 10:14:30 +11:00
Andrew Tridgell 92f9c0b648 ACM: fixed a signed/unsigned warning 2012-01-05 10:14:12 +11:00
Andrew Tridgell 596a1f43f4 ACM-simple: don't use uninitialised simple trig values 2012-01-05 10:13:36 +11:00
Jason Short 3cf77729ef Disabled stable mode wind comp by default for release 2012-01-04 09:28:38 -08:00
Jason Short 28262dd825 Added Xplane output option 2012-01-04 09:28:38 -08:00
Jason Short 467ef66a77 Added home offset for altitude 2012-01-04 09:28:38 -08:00
Jason Short 40c649a27b Made landing disarm the motors 2012-01-04 09:28:38 -08:00
Jason Short ed1ff0b171 Upped Revision 2012-01-04 09:28:38 -08:00
Jason Short 76cfdca6cc Cleaned up and documented each global vavriable 
Added Wind compensation for Stability
Acro mode fixes
 2012-01-04 09:28:37 -08:00
Jason Short 2e83e42764 Added precalc for wind compensation when entering Stabilze mode 2012-01-04 09:28:37 -08:00
Jason Short e36d2f6e96 Added Wind compensation for Stabilize 
moved speed calc to it's own function
decreased acceleration from WPs
 2012-01-04 09:28:37 -08:00
Jason Short fe8c99c49b removed PM test field 1 - not needed 2012-01-04 09:28:37 -08:00
Jason Short a2c8f5af15 removed unused vars 2012-01-04 09:28:37 -08:00
Jason Short de6325fb8a removed unused vars 2012-01-04 09:28:37 -08:00
Jason Short cf9e744ed2 removed unused vars 2012-01-04 09:28:37 -08:00
Jason Short 8ed2d96396 removed unused var 2012-01-04 09:28:37 -08:00
Jason Short 59f22f0ca0 removed airspeed 2012-01-04 09:28:37 -08:00
Jason Short ecb3241489 calc_wind_compensation called when exiting AP modes 
Rate I terms reset in Acro Mode switch
Limit of 1 m set to alt hold
Reset circle angle to 0 by default
Land got land_complete var set to false by default
 2012-01-04 09:28:37 -08:00
Jason Short 4e0e783e7c added Reset_Rate_I function 
Removed I term from Throttle rate calc
Added some basic constrains to Acro
 2012-01-04 09:28:37 -08:00
Jason Short b8c0bdb66f removed airspeed 2012-01-04 09:28:37 -08:00
Jason Short 92eece79a4 cleanup - removed unused functions, made pressure reading Float to avoid extra cast 2012-01-04 09:28:36 -08:00
Jason Short e1232e7b80 cosmetic 2012-01-04 09:28:36 -08:00
Jason Short e7b750074b Added takeoff state and ground state variable 2012-01-04 09:28:36 -08:00
Jason Short 37cda3c364 Cosmetic 2012-01-04 09:28:36 -08:00
Jason Short 2fc6a645b4 removed unused Airspeed config 2012-01-04 09:28:36 -08:00
Jason Short b28ae04e0d Removed unused options 2012-01-04 09:28:36 -08:00
Jason Short 6513b12eb2 Cosmetic 2012-01-04 09:28:36 -08:00
Jason Short 67bf991598 removed unused Airspeed config 2012-01-04 09:28:36 -08:00
Jason Short c7b5b747e8 change how Reset Nav params work - no longer clear I terms 2012-01-04 09:28:36 -08:00
Jason Short 580ad2c5ce Added JLN's landing patch, moved some variables local such as Jump counter 2012-01-04 09:28:36 -08:00
Jason Short c0c2ea4ebb removed unused functions 2012-01-04 09:28:36 -08:00
Andrew Tridgell ca39fc8b47 sitl: added build targets for different ACM frames 2012-01-04 21:45:46 +11:00
Andrew Tridgell 9d1c4ecfcd ACM: don't set defaults in APM_Config.h 
defaults set here prevent Makefile overrides, which breaks autotest
for non-default frame types
 2012-01-04 19:35:05 +11:00
Andrew Tridgell cdd5589498 I2c: default to 5ms timeout, and faster bus speed 
we will slow down the speed when we get a failure
 2012-01-04 16:36:47 +11:00
Jason Short 26d0bf93ff Added more constraints around velocity 2011-12-31 10:59:59 -08:00
Jason Short b3cea96970 Cosmetic 2011-12-31 10:54:31 -08:00
Jason Short 74b203c7f2 Lowered Yaw to prevent overshoot based on feedback 2011-12-31 10:10:45 -08:00
Jason Short ea832c0818 upped to r5 2011-12-31 10:05:13 -08:00
Jason Short 1ef7f9fe62 Loiter I reset 2011-12-31 09:45:25 -08:00
Jason Short 0ace8474d7 R4 2011-12-30 23:54:02 -08:00
Jason Short c6586810cf New Style WP navigation for high wind 2011-12-30 23:48:05 -08:00
Jason Short 2cb09f46e9 no longer calling reset_nav 2011-12-30 23:48:04 -08:00
Jason Short 6a8391f0a7 removing I term clearance 2011-12-30 23:48:04 -08:00
Jason Short 28984a72e4 no longer calling reset_nav 2011-12-30 23:48:04 -08:00
Jason Short 26267f75b2 Reverted to Crosstrack like in Arduplane, requires Degrees * 100 2011-12-30 23:48:04 -08:00
Jason Short dac29af7ab Sync with Arduplane 2011-12-30 23:48:04 -08:00
Jason Short c7f93f8718 Updated Configs based on field testing. 2011-12-30 23:48:04 -08:00
Jason Short 15a377d759 Added a default Yaw tracking setting 
Added Nav_Bearing
 2011-12-30 23:48:04 -08:00
Jason Short 84d3e3135f Added Nav_bearing, just like APlane 
added fix for LOITER in missions so we don't Yaw in circles
 2011-12-30 23:48:04 -08:00
Jason Short cf48091d00 removed old loiter method option 2011-12-30 23:48:04 -08:00
Randy Mackay 3cb74cb459 ArduCopter - init_compass - fixed HIL build issue 2011-12-31 12:29:54 +09:00
Jason Short 3ea49e1415 updated rev 2011-12-29 23:02:41 -08:00
Jason Short 21460a57ae Yaw Performance tweaks 2011-12-29 23:02:03 -08:00
Jason Short 95a70cf32e lowered to nav_lat and nav_lon int16 
added a version that didn't have I term added to get a better indication of velocity estimation
 2011-12-29 23:02:03 -08:00
Jason Short 10abb7871e removed loiter I from Reset Nav 2011-12-29 23:02:03 -08:00
Jason Short 17acbc4572 updated Loiter gains 2011-12-29 23:02:03 -08:00
Jason Short 53c09774e5 removed Rate_I from Loiter, lowing Rate_P from Loiter too. Too aggressive leads to rapid oscillations in air, and not around loiter position. 2011-12-29 23:02:03 -08:00
Jason Short 2c1fe93856 cosmetic 2011-12-29 23:02:03 -08:00
Jason Short 6f42442e57 Added 5 sec Takeoff Timer to clear i terms when lifting 
Moved loiter relocation function to update_nav
moved User hooks to correct place
Added tuning for D term
 2011-12-29 23:02:03 -08:00
Jason Short f41835d546 Added Stabilize_D parameter 2011-12-29 23:02:02 -08:00
Jason Short bb954bc479 Upped Yaw speed to deal with performance complaints 
Added new Stabilize D term default of .25
 2011-12-29 23:02:02 -08:00
Jason Short d055763947 Added second order, filtered derivative in stabilize. Works much better than the non-filtered one I used to have. 2011-12-29 23:02:02 -08:00
Jason Short fa49aa5eec Fixes for Smooth Loiter 2011-12-29 23:02:02 -08:00
Jason Short 4f60fa412c Set Define for Max throttle 2011-12-29 23:02:02 -08:00
Jason Short 8a921e869c Fixed a 1280 only test 2011-12-29 23:02:02 -08:00
Jason Short db96b9ec7a added define for Max throttle 2011-12-29 23:02:02 -08:00
Jason Short 244ca98264 Added Dampening term for tuning 2011-12-29 23:02:02 -08:00
Jason Short 7e1e1f84b3 updated Loiter PIDs 2011-12-29 23:02:02 -08:00
Jason Short 4b5437afe8 Enable Magnetometer by default 2011-12-29 23:02:02 -08:00
Jason Short 51e6170ecb Missing ; 2011-12-29 23:02:01 -08:00
Jason Short 4353f60f60 removed takeoff complete flag from missions, not used and would be useful elsewhere. 2011-12-29 23:02:01 -08:00
Jason Short fbb35928fe removed unused function 
Simplified the baro init filter
 2011-12-29 23:02:01 -08:00
Randy Mackay bbe6dea980 OptFlow - initial support for APM2 (there are still problems) including adding ability to set Chip Select pin. 
Other unrelated changes are:
a) fixed typo in 'esitmate_velocity' to 'estimate_velocity'.
b) moved init_compass from system.pde to sensors.pde which seemed consistent with other sensors.
 2011-12-30 12:06:31 +09:00
Andrew Tridgell 955dfe0226 ACM: check compass health before using it 2011-12-28 20:41:53 +11:00
Andrew Tridgell 03a16c6e45 ACM: use new I2C library 2011-12-28 20:41:53 +11:00
Andrew Tridgell 433df08cb3 ACM: enable compass by default on APM2 2011-12-28 20:30:35 +11:00
Andrew Tridgell 73e6d5ee11 ACM: update for DataFlash changes 2011-12-28 16:00:49 +11:00
Jason Short 234121f3c3 Fix for 11 channels of motors. 2011-12-26 14:39:01 -08:00
Andrew Tridgell 4fe527aefa ACM: use LED_OFF/LED_ON instead of LOW/HIGH 2011-12-26 19:32:53 +11:00
Andrew Tridgell 111d156a99 ACM: fixed HIL build again 2011-12-26 19:17:11 +11:00
Andrew Tridgell ab64a689c8 ACM-log: use DataFlash.df_NumLogs 
this fixes the flash size on APM2
 2011-12-26 19:17:11 +11:00
Randy Mackay 07041c2149 TradHeli - modified the default collective min/max values to restrict movement to about half the full range. 2011-12-26 16:59:01 +09:00
Jason Short 1afa25d9ef Tweaks to fix Loiter 
Changed save location to int32
added some filtering and smoothing
 2011-12-25 15:44:49 -08:00
Randy Mackay c24b5229e1 AP_GPS - updated MTK rate to 10Hz and fixed lat/lon printing inaccuracy in Arducopter logs and AP_TEST example sketch 2011-12-25 12:33:06 +09:00
Andrew Tridgell 0dadbf932a removed "Please run setup" loop from ArduCopter 
Chris asked for this to be removed as it was really mucking up the
initial experience setting up ArduCopter via the planner
 2011-12-24 18:12:51 +11:00
Jason Short cc4f5e7c74 disabled some tests with warnings 2011-12-23 18:54:38 -08:00
Jason Short 0491d4feca added define for optflow 2011-12-23 18:45:01 -08:00
Jason Short d7af42c925 Getting rid of Simple Logging 2011-12-23 18:44:30 -08:00
Jason Short 0f91fbcee5 Made WP radius 1 by default 2011-12-23 15:01:53 -08:00
Jason Short d9590a44d6 Fixed merge issues 2011-12-23 14:51:40 -08:00
Jason Short e5a3899b7f added ability to enter Loiter with only optflow available 2011-12-23 14:46:32 -08:00
Jason Short 73a73fbf35 moved some defines around 2011-12-23 14:46:32 -08:00
Jason Short 5518882c69 Fixed resolution issue with Xtrack 
Added stub for loiter based on estimation
integrated fix for tracking GPS at slow speeds for loiter
 2011-12-23 14:46:32 -08:00
Jason Short 2d46022a2b This is the test to deal with big props with lots of inertia. We use a low pass filter on positive acceleration. 2011-12-23 14:46:32 -08:00
Jason Short 58ad9faf6d initing z dampener at arming 2011-12-23 14:46:08 -08:00
Jason Short 5f03c62bd9 Too complicated 2011-12-23 14:46:08 -08:00
Jason Short be4b031c7d added back in the Disabled log - gave up on Log Simple idea 2011-12-23 14:45:56 -08:00
Jason Short ca8f71a705 used for testing 2011-12-23 14:42:50 -08:00
Jason Short a966a178f8 increased crosstrack thanks to float math fix 
decreased loiter iterm, decreased throttle iterm based on simulator runs
 2011-12-23 14:42:50 -08:00
Jason Short a284fc222c No longer blocking before initing home 2011-12-23 14:42:50 -08:00
Jason Short 79fff0f096 the second accel test is just for fun. 
Filtered output for Nav_throttle
 2011-12-23 14:42:50 -08:00
Jason Short 62cb407558 Begin to better integrate OptFlow, added necessary globals for Loiter estimation 2011-12-23 14:42:50 -08:00
Jason Short 85b564c5eb removed some unneeded HIL #defines 2011-12-23 14:42:49 -08:00
Pat Hickey c40fccbc26 Log_simple uses identical implementation of do_erase_logs. 
* fix build1280.ArduCopter
 2011-12-22 13:31:28 -08:00
Pat Hickey f1624621b3 ArduCopter Logging: DISABLED means DISABLED again; CONFIG_LOGGING added 
CONFIG_LOGGING selects LOGGING_SIMPLE and LOGGING_VERBOSE. Verbose
logging is the default, implemented in Log.pde. Simple logging is
optional, but the default for the 1280 build, implemented in
Log_simple.pde
 2011-12-19 21:04:51 -08:00
Randy Mackay 310f072d50 Arducopter - added "//#define APM2_BETA_HARDWARE" to AP_Config.h for developer's who received early version of the board with the old barometer 2011-12-19 22:57:00 +09:00
Jani Hirvinen 106801a59c config settings for jD motors 2011-12-19 09:29:05 +07:00
Jason Short b53a6bd4b4 Hexa stability patch bug fix by borna.segulin 2011-12-18 16:38:07 -08:00
Jason Short 239eb53983 change Alpha name 2011-12-18 16:38:07 -08:00
Andrew Tridgell ad9c0533d8 ACM: run mavlink loop while erasing logs 2011-12-18 10:19:41 +11:00
Jason Short 8970948804 Sync logging 2011-12-16 22:02:41 -08:00
Jason Short 47e4c875e1 Cleanup 
removed Iterm experiment - no noticeable effect in actual flight
 2011-12-16 20:47:23 -08:00
Andrew Tridgell f6f808357c removed AperiodicProcess code 
this code was never being used, and was more complex than it was
worth.
 2011-12-17 07:29:09 +11:00
Jason Short 2fc25d963d renamed super simple, added framework for auto calc of throttle cruise 2011-12-15 20:51:41 -08:00
Jason Short 3019c35364 turned off iterm for traverse 2011-12-15 20:51:41 -08:00
Jason Short f11f2c6d97 added some more throttle imax range 
renamed Super Simple
 2011-12-15 20:51:41 -08:00
Jason Short 72605f846c renamed super simple 2011-12-15 20:51:41 -08:00