Andrew Tridgell
d37f1a1376
Plane: updates for OBC API change
2014-04-11 16:47:40 +10:00
Andrew Tridgell
4d990fa6c8
Plane: ensure we log both GPS at the time we receive a msg
2014-04-10 10:29:53 +10:00
Andrew Tridgell
e79f1d0940
Plane: prepare for release of 3.0.1
2014-04-10 07:52:36 +10:00
Andrew Tridgell
aabcc2bb35
Plane: fixed a bug in PWM based throttle failsafe
...
many thanks to Sam Tabor for finding this bug!
2014-04-10 07:43:48 +10:00
Andrew Tridgell
affcea5342
Plane: fixed typo in VRBrain port
2014-04-08 21:22:05 +10:00
Emile Castelnuovo
a111d174c1
Plane: added VRBRAIN #defines and #includes
2014-04-08 16:19:20 +10:00
Andrew Tridgell
d0331e0f25
Plane: spelling fixes
2014-04-08 09:49:25 +10:00
Andrew Tridgell
d2d9ad5bbd
Plane: prepare for 3.0.0 release
2014-04-08 09:46:30 +10:00
Andrew Tridgell
c66008cdfa
Plane: fixed displayname for FENCE_AUTOENABLE
2014-04-08 09:13:39 +10:00
Andrew Tridgell
95764f4d78
Plane: fixed allocation and reporting of fence status
...
prevent a false fence active report on boot, and prevent the fence
from loading when it is not needed. This saves about 200 bytes of ram
on APM2 for most users
2014-04-07 17:28:03 +10:00
Michael Oborne
3fe9486868
Plane: fix auto doc unit on GROUND_STEER_DPS
2014-04-07 13:43:15 +10:00
Andrew Tridgell
de3c04adaf
Plane: show next wp when not running a mission
...
this lets the GCS know what wp would be run if auto mode is selected
2014-04-07 11:40:58 +10:00
Andrew Tridgell
1fe7b2fe18
Plane: update for new APM_OBC API
2014-04-07 07:28:35 +10:00
Andrew Tridgell
f7858bfb0a
Plane: added support for SERIAL_CONTROL message
2014-04-05 07:34:33 +11:00
Andrew Tridgell
5a84fb96ed
Plane: build fix
2014-04-03 20:54:50 +11:00
Andrew Tridgell
1efadb7a05
Plane: fixed some warnings
2014-04-03 12:48:06 +11:00
Andrew Tridgell
3c33eb3f09
Plane: use new channel output API
2014-04-03 12:19:11 +11:00
Andrew Tridgell
88693796ef
Plane: update for GPS.setHIL() API
2014-04-02 07:55:28 +11:00
Andrew Tridgell
e19341ca32
Plane: convert to new GPS driver API
2014-04-01 06:38:24 +11:00
Andrew Tridgell
958e17f4ff
Plane: use AP_GPS_Auto for 2nd GPS
2014-04-01 06:38:23 +11:00
Andrew Tridgell
14671d0bcd
Plane: fixed previous_mode error in geofence
...
when we were in MANUAL we would switch back to STABILIZE
2014-03-29 13:53:19 +11:00
Andrew Tridgell
bcbdb15c7d
Plane: changed version to 2.79beta1
2014-03-28 09:47:59 +11:00
Andrew Tridgell
61ebf365d9
Plane: fixed reverting modes when FENCE_SET_RALLY is enabled
...
we need to keep the guided destination we are using
2014-03-27 10:41:24 +11:00
Andrew Tridgell
8639676eb3
Plane: we need 5 points for a valid geofence
...
the first and last points need to be the same for it to be a closed
polygon
2014-03-27 10:40:00 +11:00
Michael Day
268b1e85a1
Plane: Changes needed prior to merging with master identified by Tridge.
2014-03-27 09:26:20 +11:00
Michael Day
f921d4fbac
Plane: FENCE_RET_RALLY param. Plane returns to rally point on breach.
2014-03-27 09:26:20 +11:00
Michael Day
25f23cf16c
Plane: Sends MAV_SYS_STATUS_GEOFENCE and also allows GCS to enable/disable fence.
2014-03-27 09:26:20 +11:00
Andrew Tridgell
32a1c717e6
Plane: report up to 18 RC input channels via MAVLink
2014-03-25 14:47:43 +11:00
Andrew Tridgell
ff70c87f0b
Plane: support 14 RC channels on PX4
2014-03-25 14:47:05 +11:00
Andrew Tridgell
09ed8d5819
Plane: updates for new RCInput API
2014-03-25 14:47:05 +11:00
Andrew Tridgell
b8781ccea7
Plane: fixed a compiler warning
2014-03-24 12:52:05 +11:00
Andrew Tridgell
e8b9f22b01
Plane: updates for GPS changes
2014-03-24 12:04:31 +11:00
Andrew Tridgell
d124fdb182
Plane: report compass unhealthy if primary compass unhealthy
2014-03-24 07:03:53 +11:00
Andrew Tridgell
f6b56b5d26
Plane: fixed mission resume at arbitrary waypoints
...
on completion of a mission a user can ask for it to resume at any wp
2014-03-21 10:21:37 +11:00
Andrew Tridgell
861523a00a
Plane: use TECS get_target_airspeed()
2014-03-20 17:34:33 +11:00
Michael Day
dd06756abf
Plane: Add Log_Write_Radio. MASK_LOG_PM must be set for logging to occur.
2014-03-20 09:56:37 +11:00
Andrew Tridgell
4257d8365c
Plane: removed check on target_component in ARM/DISARM
...
Thanks to DonLakeFlyer for finding this, see
https://github.com/diydrones/ardupilot/pull/909
2014-03-20 09:06:48 +11:00
Andrew Tridgell
ce3f40b095
Plane: use should_log() for more msgs
2014-03-19 14:18:14 +11:00
Andrew Tridgell
abfcee1cef
Plane: fixed channel reversal in HIL
...
makes it possible to reverse channels
2014-03-19 14:17:40 +11:00
Randy Mackay
3ce56f3086
Plane: integrate Mission cmd field changes
2014-03-19 12:14:24 +09:00
Andrew Tridgell
4031f7d368
Plane: use common deferred message handling
2014-03-19 12:14:17 +09:00
Andrew Tridgell
b74fddade3
Plane: use common MISSION_ITEM code
2014-03-19 12:14:11 +09:00
Andrew Tridgell
0d39f354b0
Plane: use new common MAVLink code
2014-03-19 12:13:38 +09:00
Andrew Tridgell
7d3523b4a7
Plane: use _send_buf() functions to reduce stack usage in MAVLink replies
...
this re-uses the incoming message buffer in constructing the reply
2014-03-19 12:13:28 +09:00
Andrew Tridgell
537e78f9fa
Plane: much faster mission upload
...
send next WP request immediately if possible. This speeds up mission
upload on USB by about 10x
2014-03-19 12:13:27 +09:00
Randy Mackay
1ad743c4e1
Plane: use common GCS_MAVLink handle_mission methods
2014-03-19 12:13:21 +09:00
Andrew Tridgell
740ecc2c1b
Plane: use new handle_mission_request() function
2014-03-19 12:13:12 +09:00
Randy Mackay
2184ff1e58
Plane: set_next_WP fn accepts Location
2014-03-19 12:13:06 +09:00
Randy Mackay
96b2e88e36
Plane: add comment to GCS_Mavlink.pde
2014-03-19 12:13:03 +09:00
Randy Mackay
ce9f2ef7f0
Plane: minor command logic comments and reordering
2014-03-19 12:13:01 +09:00
Randy Mackay
ad4f30e790
Plane: use mission command specific structures
2014-03-19 12:12:52 +09:00
Randy Mackay
9ef920b0be
Plane: integrate dataflash Log_Write_MavCmd
2014-03-19 12:12:45 +09:00
Andrew Tridgell
4bf140aeac
Plane: make next_WP and prev_WP be locations
...
having a command ID in them doesn't really make sense
Pair-Programmed-With: Randy Mackay <rmackay9@yahoo.com>
2014-03-19 12:12:39 +09:00
Randy Mackay
f1b97fee53
Plane: correct typo re RTL home with no mission
2014-03-19 12:12:33 +09:00
Randy Mackay
7f21e3885e
Plane: RTL home when AUTO run with no mission
2014-03-19 12:12:31 +09:00
Randy Mackay
6b789cd711
Plane: rename next_nav_command to auto_rtl_command
...
This command is only used to get the vehicle home (or to a rally point)
after the mission has completed
2014-03-19 12:12:30 +09:00
Randy Mackay
982ce56d2b
Plane: bug fix to set_current_cmd
...
When set_current_cmd mavlink message is received, resume mission only if
the mission has completed.
Stop mission when vehicle leaves AUTO mode.
2014-03-19 12:12:28 +09:00
Andrew Tridgell
3e05baf95c
Plane: fixed build (forward declarations)
2014-03-19 12:12:25 +09:00
Andrew Tridgell
2b5bf45e83
Plane: only activate mission callbacks in AUTO mode
2014-03-19 12:12:24 +09:00
Andrew Tridgell
3277416aeb
Plane: fixed relative altitudes and resuming mission
...
Pair-Programmed-With: Randy Mackay <rmackay9@yahoo.com>
2014-03-19 12:12:22 +09:00
Andrew Tridgell
4992e2e2cf
Plane: use mission.resume() not mission.start()
2014-03-19 12:12:19 +09:00
Andrew Tridgell
d4510d9b9b
Plane: altitude for do_set_home() is in meters
2014-03-19 12:12:18 +09:00
Randy Mackay
27969175d9
Plane: bug fix to Loiter after mission completes
2014-03-19 12:12:16 +09:00
Randy Mackay
790a907811
Plane: use Dataflash lib's Log_Write_Cmd
2014-03-19 12:12:08 +09:00
Randy Mackay
033b7eca9e
Plane: integrate variable max num commands
2014-03-19 12:12:02 +09:00
Randy Mackay
fcea127537
Plane: CLI uses HAL eeprom storage size definition
2014-03-19 12:11:59 +09:00
Randy Mackay
693ce27bf6
Plane: pass eeprom start to Mission constructor
2014-03-19 12:11:58 +09:00
Randy Mackay
36a5287de5
Plane: call mission.init during startup
2014-03-19 12:11:49 +09:00
Randy Mackay
6e60730c89
Plane: cli test checks read_cmd success before printing
2014-03-19 12:11:41 +09:00
Randy Mackay
ccb2daaed3
Plane: Log_Write_Startup checks success of cmd read before logging
2014-03-19 12:11:40 +09:00
Randy Mackay
0827506533
Plane: remove unused WAIT_COMMAND
2014-03-19 12:11:24 +09:00
Randy Mackay
53add04d36
Plane: remove some comments in commands_logic.pde
2014-03-19 12:11:22 +09:00
Randy Mackay
802ab79c84
Plane: bug fix for setting flight_stage based on current command
2014-03-19 12:11:19 +09:00
Randy Mackay
c4364a8ff5
Plane: remove unused nonnav_command variables
...
non_nav_command_ID and next_nonnav_command variables removed
2014-03-19 12:11:18 +09:00
Randy Mackay
52a08a5284
Plane: CMD dataflash logs use uint16 for total and num
...
Also bug fix for Log_Write_Cmd definition when logging disabled
2014-03-19 12:11:16 +09:00
Andrew Tridgell
f036aa1780
Plane: fixed altitude for takeoff and takeoff heading
...
fixes for AP_Mission integration
Pair-Programmed-With: Randy Mackay <rmackay9@yahoo.com>
2014-03-19 12:11:09 +09:00
Randy Mackay
601cde2a32
Plane: remove alt_in_cm from mavlink to cmd conversion
2014-03-19 12:11:03 +09:00
Randy Mackay
bc86a5043a
Plane: bug fix for relative alt
2014-03-19 12:11:00 +09:00
Randy Mackay
9446e9fd2e
Plane: integrate AP_Mission library
2014-03-19 12:10:58 +09:00
Randy Mackay
ddba6f5c19
Plane: mission integration into GCS_Mavlink.pde
2014-03-19 12:10:57 +09:00
Randy Mackay
97f09ab426
Plane: dataflash logging to use Mission command
2014-03-19 12:10:55 +09:00
Randy Mackay
fdaf3fc177
Plane: add AP_Mission object to parameter list
2014-03-19 12:10:54 +09:00
Randy Mackay
e88f1953d0
Plane: use common location options masks
2014-03-19 12:10:21 +09:00
Andrew Tridgell
2b8cc1a1df
Plane: use set_mode() in do_RTL()
...
thanks to Randy for spotting this
2014-03-15 22:15:06 +11:00
Andrew Tridgell
eb7db82210
Plane: altitude for do_set_home() is in meters
2014-03-14 11:26:10 +11:00
Andrew Tridgell
d595f36ca5
Plane: print PX4 compass type
2014-03-13 16:26:25 +11:00
Andrew Tridgell
65ae9663d4
Plane: set 2nd GPS as secondary
2014-03-08 21:48:12 +11:00
Andrew Tridgell
8574303a94
Plane: treat PWM below 900 as invalid for mode switch
...
the FrSky X8R receiver will briefly give a PWM of 874 on channel 5
when connection is lost to the transmitter. We need to ensure this
doesn't cause a mode switch
2014-03-08 19:27:50 +11:00
Andrew Tridgell
3a3397d926
Plane: fixup throttle trim on failsafe
2014-03-08 19:27:50 +11:00
Andrew Tridgell
c9ebd6a175
Plane: improved RC failsafe handling
...
this forces all primary control inputs to the trim value on loss of RC
input, and reduces the timeout for loss of RC input to 1 second from 2
2014-03-08 16:20:54 +11:00
Andrew Tridgell
2cf98e476c
Plane: added support for a separate steering channel
...
good for ground steering on larger aircraft
2014-03-05 12:57:50 +11:00
Andrew Tridgell
8d95b953c3
Plane: removed some unused functions
2014-03-05 09:17:50 +11:00
Andrew Tridgell
0d6064034a
Plane: use percent_input() for flaps
2014-03-05 09:17:50 +11:00
Andrew Tridgell
e3952112ad
Plane: raise default LIM_PITCH_MAX to 20 degrees
...
15 is often not enough to climb
2014-03-03 15:49:04 +11:00
Andrew Tridgell
e784c81f3e
Plane: only send GPS2_RAW when we have a 2nd GPS
2014-03-03 07:05:52 +11:00
Andrew Tridgell
6b9e1edf38
Plane: disable GPS2 in HIL
2014-02-27 08:16:28 +11:00
Andrew Tridgell
07826096a2
Plane: support a 2nd GPS
2014-02-26 09:24:23 +11:00
Andrew Tridgell
95dd252f29
Plane: pass fix type to gps->setHIL()
2014-02-25 21:11:15 +11:00
Andrew Tridgell
8a4289b56f
Plane: remove unused variables
...
thanks to Mike McCauley
2014-02-24 18:49:14 +11:00
Andrew Tridgell
4bcf9b5d98
Plane: fixed logging of relative altitude
2014-02-23 08:18:43 +11:00
Andrew Tridgell
492e65acde
Plane: fix for HIL API change
2014-02-23 08:18:31 +11:00
Randy Mackay
a76e2ab02e
Plane: reserve NavEKF slot in param list even when not used
...
Although this wasn't a problem immediatley, if someone had added a
parameter after k_param_NavEKF it's position in eeprom could have moved
as AP_AHRS_NAVEKF_AVAILABLE was enabled/disabled
2014-02-21 13:53:05 +09:00
Andrew Tridgell
2908beb9bd
Plane: fixed Log when disarmed value in docs
2014-02-19 19:01:48 +11:00
Andrew Tridgell
33851030a4
Plane: use ahrs.get_armed()
2014-02-19 10:53:26 +11:00
Andrew Tridgell
9282c8d0d9
Plane: allow for a wider range of values on the control switch
2014-02-17 13:58:11 +11:00
Paul Riseborough
98f72a4864
Plane : changed useage of ahrs.set_correct_centrifugal
2014-02-16 22:34:52 +11:00
Andrew Tridgell
99f2c8387c
Plane: change to Compass::learn_offsets
2014-02-16 13:22:06 +11:00
Andrew Tridgell
59a56c9b46
Plane: enable Baro logging
2014-02-15 07:29:39 +11:00
Andrew Tridgell
566b0ccc61
Plane: call esimate_wind()
2014-02-15 05:48:24 +11:00
Andrew Tridgell
d7839aa4ab
Plane: removed duplicate log description
2014-02-15 05:48:24 +11:00
Andrew Tridgell
1001df0e56
Plane: removed extra log enum
2014-02-15 05:48:23 +11:00
Andrew Tridgell
35a9201c9a
Plane: fixed comma
2014-02-15 05:48:23 +11:00
Andrew Tridgell
a7faa58879
Plane: fixed up merge errors
2014-02-15 05:48:23 +11:00
Andrew Tridgell
a551703877
Plane: fixed parameter build for NavEKF
2014-02-15 05:48:22 +11:00
Paul Riseborough
8c4b0b9be9
Plane : NavEKF Mavlink tunable parameter - first attempt
2014-02-15 05:48:22 +11:00
Paul Riseborough
24f8f02942
Plane : disable AHRS centrifugal corrections when disarmed
2014-02-15 05:48:20 +11:00
Andrew Tridgell
bb4789a875
Plane: use common EKF logging
2014-02-15 05:48:16 +11:00
Andrew Tridgell
4646682a31
Plane: use common send_ahrs2()
2014-02-15 05:48:16 +11:00
Andrew Tridgell
57e0eb4db5
Plane: use a const reference for home
2014-02-15 05:48:15 +11:00
Andrew Tridgell
2817a11f23
Plane: added AHR2 and SIM logging
2014-02-15 05:48:14 +11:00
Andrew Tridgell
11337ab2df
Plane: updates for AHRS holding home position
2014-02-15 05:29:47 +11:00
Andrew Tridgell
df5195e2c9
Plane: change for new AHRS API
2014-02-15 05:29:47 +11:00
Andrew Tridgell
e39247868c
Plane: cleanup HIL defines
2014-02-15 05:29:46 +11:00
Andrew Tridgell
2cd6efa23e
Plane: added DF logging of secondary AHRS solution
2014-02-15 05:29:45 +11:00
Andrew Tridgell
99cfaf6097
Plane: switched to AHRS2 message for reporting
2014-02-15 05:29:45 +11:00
Andrew Tridgell
9ac886f58d
Plane: use AP_AHRS_NavEKF when available
2014-02-15 05:28:09 +11:00
Paul Riseborough
e0e4b1aefa
Plane : Updated NavEKF flash data logging
2014-02-15 05:28:09 +11:00
Paul Riseborough
d6ead64083
Plane : Additional NavEKF flash logging
2014-02-15 05:28:08 +11:00
Andrew Tridgell
006b9da6be
Plane: only include NavEKF on fast CPUs
2014-02-15 05:28:08 +11:00
Andrew Tridgell
ce9047cec5
Plane: added dataflash logging of EKF data
2014-02-15 05:28:07 +11:00
Andrew Tridgell
1fbae4dd44
Plane: enable NavEKF logging in plane
2014-02-15 05:28:07 +11:00
Andrew Tridgell
cd9027adfd
Plane: added NavEKF object
2014-02-15 05:27:52 +11:00
Paul Riseborough
fb1345dd99
Plane : add suport for NavEKF
2014-02-15 05:27:52 +11:00
Andrew Tridgell
7de8be1956
Plane: log power status on Pixhawk
2014-02-15 05:00:09 +11:00
Andrew Tridgell
dfa95b3464
Plane: moved the always log flag to 1<<16
...
this prevent problems with transferring the bitmask as a float
2014-02-14 21:51:00 +11:00
Andrew Tridgell
043c80dbe6
Plane: use new board_voltage() method
2014-02-14 21:50:59 +11:00
Andrew Tridgell
ae9201342a
Plane: allow FLAP_IN_CHANNEL to control k_flap and k_flap_auto too
2014-02-06 14:09:49 +11:00
Andrew Tridgell
c3b7e76c28
Plane: added flaperon support
...
this adds FLAPERON_OUTPUT and FLAP_IN_CHANNEL to allow both manual
and auto flap control for both normal flaps and flaperons
2014-02-06 12:38:59 +11:00
Andrew Tridgell
04f2c07b2b
Plane: use new RC_Channels API
2014-02-06 10:17:16 +11:00
Andrew Tridgell
e42a10a764
Plane: allow printing of GUIDED mode in logs
2014-02-02 14:04:36 +11:00
Andrew Tridgell
48577ffbc2
Plane: check the parameter table on startup
2014-01-31 13:07:52 +11:00
Andrew Tridgell
f06152530c
Plane: prepare for 2.78b release
2014-01-31 12:15:27 +11:00
Andrew Tridgell
6cabca690e
Plane: fixed RSSI_RANGE enum
...
many thanks to Valince for spotting this
2014-01-31 12:14:18 +11:00
Andrew Tridgell
7009c4aead
Plane: prepare for 2.78 release
2014-01-30 14:26:46 +11:00
Andrew Tridgell
3a986474e0
Plane: added RSSI_RANGE parameter
2014-01-30 11:29:35 +11:00
Andrew Tridgell
6b12f13d64
Plane: prepare 2.78beta2
2014-01-29 22:05:21 +11:00
Andrew Tridgell
906fc17905
Plane: added baro and airspeed logging
...
including raw temperature and pressure values
2014-01-28 10:35:59 +11:00
Andrew Tridgell
9f683e6b9b
Plane: prepare 2.78beta1
2014-01-27 14:08:43 +11:00
Andrew Tridgell
369c130c2d
Plane: consider GPS unhealthy if it doesn't have 3D lock
2014-01-27 09:02:22 +11:00
Andrew Tridgell
11ece65656
Plane: update docs for RSSI_PIN for pixhawk
2014-01-24 11:18:28 +11:00
Andrew Tridgell
e5e04d65ee
Plane: improve LOG_BITMASK docs
2014-01-24 10:00:23 +11:00
Andrew Tridgell
c37a7cd9e1
Plane: update AP_Notify flags for arming state
2014-01-23 21:40:34 +11:00
Andrew Tridgell
ab4a5d676e
Plane: ready for 2.77 release
2014-01-20 19:41:19 +11:00
Andrew Tridgell
c16e3a035f
Plane: fixed disarmed throttle in HIL
2014-01-20 19:41:19 +11:00
Andrew Tridgell
776b999f43
Plane: fixed disarmed PWM output
2014-01-20 17:34:50 +11:00
Andrew Tridgell
cdd36b2c41
Plane: use AP_ServoRelayEvents library
2014-01-20 17:06:29 +11:00
Andrew Tridgell
2045591bed
Plane: fixed servo and relay repeat code
2014-01-20 17:06:29 +11:00
Andrew Tridgell
e4e5c92453
Plane: fixed relay handling
...
the parameters were badly out of whack!
2014-01-20 17:06:29 +11:00
Andrew Tridgell
d3adf4c32c
Plane: enable AP_BoardConfig
2014-01-20 17:06:28 +11:00
Andrew Tridgell
ada0dd5504
Plane: check both ground and airspeed in autocal test
...
when the airspeed ratio is far too low we were not raising it as the
airspeed was never getting above the minimum airspeed
Pair-Programmed-With: Jon Challinger
2014-01-17 10:29:28 +11:00
Andrew Tridgell
30a210cfa6
Plane: setup PWM to be used on throttle when safety is safe on PX4
2014-01-15 22:28:00 +11:00
Andrew Tridgell
3a5fb46dc2
Plane: fixed integer size problem on APM2
2014-01-14 21:27:39 +11:00
Andrew Tridgell
91cc08a3ef
Plane: log PX4Firmware and NuttX git revisions in logs
2014-01-14 15:37:03 +11:00
Andrew Tridgell
cf09fef1db
Plane: prevent log corruption when new log started
2014-01-14 14:29:14 +11:00
Andrew Tridgell
a15336079e
Plane: start logging when first needed
2014-01-14 13:51:49 +11:00
Andrew Tridgell
8755747da0
Plane: only log when armed by default
...
use safety switch if arming not enabled
2014-01-14 13:07:43 +11:00
Andrew Tridgell
874110b29d
Plane: make LOG_BITMASK 32 bits
2014-01-14 13:06:52 +11:00
Andrew Tridgell
def782c441
Plane: use uppercase names on microSD card where possible
2014-01-14 12:46:26 +11:00
Don Gagne
e68cf2d1c5
Plane: Fix parameter documentation
...
Fixes some problems with incorrect docs which would in turn generate
bad amp.pdef.xml files for ground stations.
merge with below
2014-01-09 14:02:21 +09:00
Andrew Tridgell
9df5887aab
Plane: fixed redundent logging
2013-12-31 15:55:33 +11:00
Andrew Tridgell
d9cb101a03
Plane: default LOG_BITMASK to 32767 on non-APM
2013-12-31 10:28:38 +11:00
Michael Day
d4f42d41f7
Plane: removed some compile warnings from rally.pde
2013-12-31 09:48:24 +11:00
Michael Day
c87d72353f
Plane: Introducing FENCE_RETALT parameter.
2013-12-31 09:48:20 +11:00
Michael Day
87c60ee293
Plane: Doc. update for ALT_HOLD_RTL with Rally Points.
2013-12-31 09:48:16 +11:00
Andrew Tridgell
f35cf2beba
Plane: use file based logs in SITL
2013-12-29 07:14:31 +11:00
Andrew Tridgell
3486b933c0
Plane: use common send_meminfo()
2013-12-28 16:02:06 +11:00
Andrew Tridgell
72473e4317
Plane: use AP_HAL available_memory() call
2013-12-28 14:51:37 +11:00
Andrew Tridgell
6856cc6e4b
Plane: break up GPS and logging, allow GPS update at 50Hz
...
this prevents mismatches in GPS message arrival and accel message
arrival from causing small DCM errors
2013-12-28 14:25:54 +11:00
Randy Mackay
a1d5c0a02a
Plane: replace APM with board in cli
2013-12-28 10:42:30 +09:00
Andrew Tridgell
7ffbed24cc
Plane: initialise scheduler callback after logging
...
this could cause log corruption otherwise
2013-12-28 10:24:46 +11:00
Andrew Tridgell
43a56151d7
Plane: reset mission on disarm
...
this makes repeated missions easier
2013-12-20 12:04:23 +11:00
Andrew Tridgell
89366a1ee1
Plane: fixed ARMING_REQUIRED=2 on APM2 to disable rc output on throttle
2013-12-20 11:59:45 +11:00
Andrew Tridgell
ce773f085a
Plane: make the defaut for FS_GCS_ENABL clearer
2013-12-20 11:44:44 +11:00
Andrew Tridgell
263f3b116b
Plane: added FS_GCS_ENABL==2 option
...
this allows GCS failsafe when the GCS isn't getting updates from the
aircraft
2013-12-20 11:39:00 +11:00
Andrew Tridgell
a4af83d454
Plane: only allow right rudder for arming
...
copter users may try to use left rudder to ensure aircraft is
disarmed. Making left rudder arm could be dangerous
2013-12-20 09:43:04 +11:00
Andrew Tridgell
77c6e51887
Plane: allow throttle failsafe on no RC input
...
on PX4 we just stop getting input on loss of RC - we need to consider
this to be "throttle failsafe"
2013-12-20 09:43:04 +11:00
Andrew Tridgell
4f242aedec
Plane: fixed a bug where mode would not revert on geo-fence disable
...
the mode would not revert if the switch was in position 0
2013-12-17 14:14:13 +11:00
Michael Day
dcfed13c87
Plane: Fence breach now sends to correct return point in Guided Mode.
2013-12-17 14:14:13 +11:00
Andrew Tridgell
ca67c24eef
Plane: removed common functions
2013-12-17 12:00:46 +11:00
Andrew Tridgell
d93b95186d
Plane: prevent a build warning
2013-12-17 11:51:36 +11:00
Andrew Tridgell
8b7fe3cf50
Plane: changes for new DataFlash API
2013-12-17 11:51:36 +11:00
Andrew Tridgell
e0b511e367
Plane: enable new log download functions
2013-12-17 11:51:35 +11:00
Andrew Tridgell
508817d617
Plane: moved ap_message into GCS.h
2013-12-17 11:51:35 +11:00
Andrew Tridgell
4bad2cfb3a
Plane: use common GCS.h
2013-12-17 11:51:35 +11:00
Andrew Tridgell
622a2053ff
Plane: fixed parameters typo
2013-12-11 21:37:01 +11:00
Andrew Tridgell
3508a14542
Plane: small arming tidyups
2013-12-11 17:29:26 +11:00
Andrew Tridgell
b0236610b2
Plane: fixed arming bit in MAVLink heartbeat message
2013-12-11 17:29:26 +11:00
Andrew Tridgell
103da0c889
Plane: when no GPS lock always send GPS messages
2013-12-11 17:29:26 +11:00
Michael Day
b0a0316dd6
Plane: Now using AP_Arming library.
2013-12-11 17:29:23 +11:00
Andrew Tridgell
6ed21c12db
Plane: added logging of 2nd compass
2013-12-10 15:32:11 +11:00
Andrew Tridgell
49f49648ec
Plane: changes for compass healthy API
2013-12-09 17:47:38 +11:00
Andrew Tridgell
02af644010
Plane: report both sets of sensors in MAVLink
2013-12-09 17:34:07 +11:00
Andrew Tridgell
b637ab35e4
Plane: lower the priority of mount update
2013-12-09 17:34:07 +11:00
Andrew Tridgell
d642254f18
Plane: breakup one second loop into 3 pieces
...
this prevents it not running when gimbal is active
2013-12-09 17:34:07 +11:00
Andrew Tridgell
65c97a2f5f
Plane: updates for compass API change
2013-12-09 17:34:06 +11:00
Randy Mackay
b6462c23af
Plane: disable external leds
2013-11-30 22:53:55 +09:00
Andrew Tridgell
1124e84ae0
Plane: fixed APM1 build
2013-11-30 06:56:16 +11:00
Andrew Tridgell
6b4a3ef98b
Plane: added MAVLink sonar logging
2013-11-28 21:49:27 +11:00
Andrew Tridgell
5a0cb5dea4
Plane: added sonar logging to dataflash
2013-11-28 21:49:27 +11:00
Randy Mackay
45ab18f131
Plane: rename Log_Write_SERVO to Log_Write_RCOU
2013-11-27 20:18:16 +09:00
Andrew Tridgell
079d48f6cc
Plane: use log system ID if available
2013-11-26 13:00:03 +11:00
Andrew Tridgell
8383abc1fe
Plane: added SERIAL2_BAUD and rename SERIAL3_BAUD to SERIAL1_BAUD
2013-11-26 13:00:03 +11:00
Andrew Tridgell
a05a32dbda
Plane: added RCIN and SRVO logging
2013-11-26 09:04:43 +11:00
Andrew Tridgell
457183b6f5
Plane: cope with uartD being NULL
2013-11-23 21:44:45 +11:00
Andrew Tridgell
5f32f44366
Plane: fixed mavlink_queue[] size
2013-11-23 19:29:23 +11:00
Andrew Tridgell
2fa5e6310d
Plane: added 3rd telemetry stream on platforms that have it
...
this generalises the gcs object usage
2013-11-23 19:29:22 +11:00
Andrew Tridgell
490a061c6f
Plane: added HIL_ERR_LIMIT
...
this allows DCM to recover if HIL attitude drifts too far from true attitude
2013-11-23 18:50:57 +11:00
Andrew Tridgell
17c9cedac1
Plane: send out HIL servo updates as soon as we can
...
this improves the servo responsiveness of HIL a lot
2013-11-23 18:50:57 +11:00
Andrew Tridgell
1e36ebc31b
Plane: reset HIL attitude if off by more than 5 degrees
2013-11-23 18:50:56 +11:00
Andrew Tridgell
8bfe59cea5
Plane: send SIMSTATE messages in HIL
...
this allows better tracking of the simulator state, to see if issues
are caused by DCM failure
2013-11-23 18:50:56 +11:00
Andrew Tridgell
58b767b8e4
Plane: rename geofence structure
...
makes using gdb easier as it doesn't mix up the structure and the
pointer
2013-11-23 18:50:55 +11:00
Randy Mackay
c01a3debd6
Plane: log INS errors in PM message
2013-11-18 13:08:40 +09:00
Andrew Tridgell
56f574684d
Plane: fixed throttle failsafe with reversed throttle
2013-11-17 15:32:53 +11:00
Andrew Tridgell
2af69b7131
Plane: make batter failsafe docs clearer
2013-11-09 18:14:02 +11:00
Andrew Tridgell
7e10811673
Plane: send firmware and git version in tlog
2013-11-09 10:09:20 +11:00
Andrew Tridgell
eee1364f05
Plane: update comments on ALT_CTRL_ALG and NAV_CONTROLLER
2013-11-08 07:54:16 +11:00
Andrew Tridgell
c1bc093cf5
Plane: removed unused variable
2013-11-07 13:54:25 +11:00
Andrew Tridgell
1aa29df52d
Plane: report INS and airspeed health
2013-11-07 12:48:17 +11:00
Andrew Tridgell
53c3dff334
Plane: allow changing of loiter direction while loitering
...
useful for causing path capture failures in the sim
2013-11-07 11:54:28 +11:00
Andrew Tridgell
1328bbf040
Plane: log the AHRS error terms in dataflash
...
also log raw IMU at 10Hz with default config
2013-11-07 10:19:13 +11:00
Andrew Tridgell
691eaabe94
Plane: prepare for 2.76 release
2013-11-05 15:55:08 +11:00
Andrew Tridgell
78604bd84e
Plane: only send GPS_RAW_INT if new data
...
this reduces link load when asking for high rate telemetry
2013-11-05 14:40:51 +11:00
Andrew Tridgell
5e4b243c7b
Plane: make DataFlash objects static
2013-11-04 21:37:50 +11:00
Andrew Tridgell
ae8ef344bf
Plane: added time to most plane log messages
2013-11-04 21:37:30 +11:00
Andrew Tridgell
231b5ab793
Plane: prevent too large combined pitch/roll angles
...
this reduces the roll limit by cos(pitch) and pitch minimum by
cos(roll). This prevents unreasonable attitudes in all stabilised
modes
Pair-Programmed-With: Paul Riseborough <p_riseborough@live.com.au>
2013-11-04 21:21:42 +11:00
Andrew Tridgell
ff5f2ceae5
Plane: update for API changes
2013-11-04 21:21:42 +11:00
Andrew Tridgell
b1c9b57c73
Plane: mark 2.76beta1
2013-11-02 21:48:17 +11:00
Andrew Tridgell
26a3860af2
Plane: fixed PM message
2013-11-02 21:41:30 +11:00
Andrew Tridgell
5a92ce4af6
Plane: added altitude and ground speed to NTUN logs
2013-11-02 21:41:11 +11:00
Andrew Tridgell
fe3943e686
Plane: faster startup
...
make it less likely to send wrong INS_PRODUCT_ID, plus don't waste as
much time
2013-11-02 21:41:11 +11:00
Randy Mackay
328de5fc7b
Plane: add @Increment to battery failsafe descriptions
2013-10-29 11:23:54 +09:00
Andrew Tridgell
bcb0deb888
Plane: ready for 2.75 release
2013-10-28 18:22:25 +11:00
Andrew Tridgell
3ff407cb75
Plane: improved perf monitoring with SCHED_DEBUG
2013-10-28 17:10:00 +11:00
Andrew Tridgell
cfa38df528
Plane: allow parameters to download at full speed
2013-10-28 10:34:32 +11:00
Andrew Tridgell
a407609dbe
Plane: tag 2.75beta5
2013-10-26 07:57:35 +11:00
Andrew Tridgell
b897285737
Plane: set system time on GPS lock
2013-10-24 14:22:48 +11:00
Andrew Tridgell
3289041428
Plane: added MAVLink SYSTEM_TIME message
2013-10-24 14:22:47 +11:00
Andrew Tridgell
6f3458eb25
Plane: fixed setting of waypoint when not in AUTO
...
this fixes a bug where the next waypoint is set incorrectly if set via
MAVLink when not in AUTO
2013-10-23 09:40:41 +11:00
Andrew Tridgell
210ca08abd
Plane: changed to 2.75beta4
2013-10-18 11:53:51 +11:00
Andrew Tridgell
4239498b62
Plane: moved fast_loop() into main scheduler table
2013-10-15 09:52:23 +11:00
Andrew Tridgell
294b669948
Plane: fixed rally altitude to be in meters
...
this matches the docs
2013-10-14 16:38:40 +11:00
Andrew Tridgell
5adf4e1706
Plane: improve THROTTLE_NUDGE docs
2013-10-14 15:40:26 +11:00
Andrew Tridgell
5e1f5ffb7f
Plane: removed some old defines
2013-10-14 14:40:30 +11:00
Andrew Tridgell
7f6eecd9d5
Plane: cleanup cruft in Makefile
2013-10-13 21:41:01 +11:00
Andrew Tridgell
a3168bcbaa
Plane: fixes for AP_Mount API
2013-10-13 11:03:31 +09:00
Andrew Tridgell
035ac3800a
Plane: use G_Dt for acro angle integration
...
also cleanup some other uses of performance timing
2013-10-12 13:30:27 +11:00
Andrew Tridgell
05115684c1
Plane: pass FlightStage to TECS
...
this will allow for better throttle and pitch control on landing
2013-10-12 13:14:30 +11:00
Andrew Tridgell
0ec322ee47
Plane: support MAV_CMD_DO_SET_CAM_TRIGG_DIST
2013-10-11 21:37:27 +11:00
Andrew Tridgell
72505cf4e5
Plane: release 2.75beta3
2013-10-11 16:29:08 +11:00
Andrew Tridgell
8e5d1430da
Plane: use ins.wait_for_sample()
2013-10-08 17:31:15 +11:00
Andrew Tridgell
2bb497703c
Plane: avoid delay_microseconds() until fixed on PX4
2013-10-08 14:55:38 +11:00
Andrew Tridgell
48ed480d59
Plane: improved latency of main loop
...
use a 500usec delay
2013-10-08 11:50:54 +11:00
Andrew Tridgell
e6af7dad3d
Plane: switched to L3G4200D driver for Linux
2013-10-08 11:50:54 +11:00
Andrew Tridgell
a4604ab317
Plane: honor zero RALLY_LIMIT_KM
2013-10-06 14:54:50 +11:00
Andrew Tridgell
5bf1463e7a
Plane: added RALLY_LIMIT_KM
...
this will prevent an embarressing use of a rally point from the wrong
airfield
2013-10-06 14:51:13 +11:00
Andrew Tridgell
365e82aecb
Plane: use a rally point when out of mission items
2013-10-05 23:07:32 +10:00
Andrew Tridgell
61dd04ccb5
Plane: auto-update home and baro calibration when disarmed
...
this takes advantage of the PX4 arming state to ensure position and
baro calibration is updated
2013-10-05 18:45:45 +10:00
Andrew Tridgell
536fbb4a30
Plane: if pilot gives aileron input then disable ground steering
...
otherwise it would be very tricky to do a low pass!
2013-10-05 07:46:27 +10:00
Andrew Tridgell
d32e58db84
Plane: split out the channel stick mixing
...
makes code a bit clearer
2013-10-05 07:46:27 +10:00
Andrew Tridgell
3be939eb03
Plane: give manual steering when still
...
useful for servo testing
2013-10-05 07:46:27 +10:00
Andrew Tridgell
d275f50539
Plane: added GROUND_STEER_ALT and GROUND_STEER_DPS
...
this uses the new AP_SteerController steering controller developed for
the rover code to allow for ground steering of planes
2013-10-05 07:46:27 +10:00
Andrew Tridgell
081510d37a
Plane: added ACRO_LOCKING parameter
...
this enables/disables the attitude locking in acro mode, allowing acro
to be a pure rate controller
2013-10-05 07:45:12 +10:00
Randy Mackay
6e2b1093fc
Plane: mavlink ext status to use SYS_STATUS_SENSOR enum
2013-10-04 13:21:01 +09:00
Andrew Tridgell
011915eb1c
Plane: added error checking to rally load save
...
sanity check the rally points
2013-10-03 12:21:08 +10:00
Michael Day
497c95de8e
Plane: Add support for rally points.
...
Added parameter RALLY_TOTAL.
Added handlers for new MAVLink messages RALLY_POINT and
RALLY_FETCH_POINT.
defines.h modified to make room in EEPROM to store rally points.
rally.pde added and is responsible for ensuring rally points get
stored in the correct spot in EEPROM.
Multiple Rally/RTL point support now done. If rally points have
been defined, then when RTL mode is entered, the closest Rally
point is chosend and the plane loiters at that point.
Note only 10 rally points can be defined; this is to save space in
the APM's EEPROM.
2013-10-03 12:21:08 +10:00
Randy Mackay
21360aeebf
Plane: sent current as -1 to GCS when can't be monitored
2013-10-03 11:16:33 +09:00
Randy Mackay
9722276827
Plane: batt curr and remaining should be int16
2013-10-03 11:16:26 +09:00
Randy Mackay
cb91440c63
Plane: remove test_battery from CLI
2013-10-03 11:16:22 +09:00
Randy Mackay
9388ea3848
Plane: integrate BattMonitor exhausted method
...
BatteryMonitor object made static
Removed unused macros for battery voltage and current monitoring
2013-10-03 11:16:21 +09:00
Andrew Tridgell
74c8c8aafa
Plane: auto-upgrade battery variables in EEPROM
2013-10-03 11:16:12 +09:00
Randy Mackay
c64d444b5a
Plane: integrate BattMonitor
2013-10-03 11:16:08 +09:00
Andrew Tridgell
65976831e2
Plane: moved Linux logs to logs directory
2013-10-01 13:05:18 +10:00
Andrew Tridgell
eef693f243
Plane: removed some compat code
...
fixes warnings
2013-09-30 21:06:43 +10:00
Andrew Tridgell
24099a520d
Plane: updates for AP_HAL::MemberProc
2013-09-30 21:06:43 +10:00
Andrew Tridgell
444d053dc2
Plane: enable Oilpan and BMP085 on Linux
2013-09-29 01:02:05 +10:00
Andrew Tridgell
f68778d453
Plane: be friendly to multi-tasking OSes
2013-09-28 22:04:15 +10:00
Andrew Tridgell
287db19119
Plane: updates for Stub -> HIL
2013-09-28 22:04:15 +10:00
Andrew Tridgell
88959004d7
Plane: use new scheduler API
2013-09-28 21:24:03 +10:00
Andrew Tridgell
1fd0f73e3f
Plane: use DataFlash_File on Linux
2013-09-28 21:24:02 +10:00
Andrew Tridgell
c3d0b315cf
Plane: added HAL_LINUX includes
2013-09-28 21:24:02 +10:00
Andrew Tridgell
650ff258db
Plane: update for new INS API
2013-09-27 10:49:00 +10:00
Mike McCauley
6a8c1a0c36
Plane: Added flymaple to ArduPlane
2013-09-24 13:51:28 +10:00
Mike McCauley
aa800472be
Plane: defines.h added Flymaple INS
2013-09-24 13:51:28 +10:00
Mike McCauley
3ddcdba659
Plane: Parameters BATTERY_MONITORING for Flymaple
2013-09-24 13:51:28 +10:00
Mike McCauley
18c6b00b5b
Plane: Added definitions for Flymaple
2013-09-24 13:51:28 +10:00
Andrew Tridgell
4f310aaec8
Plane: fixed build with print() base change
2013-09-23 18:10:22 +10:00
Mike McCauley
767884b7f1
Plane: workaround conflicts between wirish and APM compatibility
2013-09-23 18:10:21 +10:00
Kevin Hester
996eda0080
Plane: Report MAV_STATE_ACTIVE if flying, MAV_STATE_STANDBY otherwise
...
(There are also various error states MAV_STATE_CRITICAL that are unchanged
by this check in).
The is_flying() check is similar to the code in suppress_throttle, but
I wanted to make it very optimistic on thinking we are flying - which is
not what you want for set_throttle...
(AC has similar MAV_STATE_ACTIVE vs MAV_STATE_STANDBY behavior now)
2013-09-21 21:57:07 +10:00
Andrew Tridgell
bcce2e4fc5
Plane: use new Baro API
2013-09-21 21:31:03 +10:00
Andrew Tridgell
36466e91ed
Plane: run SENSOR_OFFSETS message at 1/10 of the requested rate
...
this message wastes bandwidth, as the values change very slowly
2013-09-21 09:35:45 +10:00
Andrew Tridgell
c4dcdcf5a2
Plane: only send RC_CHANNELS_SCALED in HIL
...
saves a bit of telemetry bandwidth
2013-09-21 09:30:29 +10:00
Andrew Tridgell
b28a4f21f2
Plane: fixed uartA baud rates for APM1
2013-09-21 09:30:29 +10:00
Andrew Tridgell
e455ee0a94
Plane: fixed throttle suppression for AUTO_FBW_STEER=1
2013-09-20 17:20:06 +10:00
Andrew Tridgell
1869cd52e1
Plane: fixed AUTO_FBW_STEER stick mixing
2013-09-20 17:20:06 +10:00
Andrew Tridgell
328e900364
Plane: changed TKOFF_THR_DELAY default to 2
...
this makes it safer for hand launch with pusher props
2013-09-19 21:42:21 +10:00
Paul Riseborough
43cf0736a3
Plane: Auto Takeoff Check updates
...
Adds additional launch angle protection and protection against early
exit from auto causing unexpected motor start on re-entry
2013-09-19 21:37:31 +10:00
Randy Mackay
ab4274aa8d
Plane: disable battery failsafe when usb connected
2013-09-19 17:43:08 +09:00
Andrew Tridgell
21a4da0d29
Plane: removed flash_leds() calls
2013-09-19 18:38:28 +10:00
Andrew Tridgell
4bd6b2f428
Plane: use new usb_connected() function
2013-09-19 16:23:58 +10:00
Andrew Tridgell
8a76d82de4
Plane: set failsafe_radio AP_Notify bits
2013-09-18 11:58:54 +10:00
Andrew Tridgell
150e7a3f16
Plane: prevent arming tone on startup
2013-09-18 10:56:06 +10:00
Andrew Tridgell
95a696ea36
Plane: enable failsafe battery reporting
2013-09-18 10:50:34 +10:00
Andrew Tridgell
ec0c894306
Plane: use the projected position for geofencing and waypoints
2013-09-17 21:05:25 +10:00
Andrew Tridgell
43ffe91546
Plane: added FS_ACTION of 2 for glide
...
this allows people without specified settings in their receiver for
failsafe to choose FBWA zero throttle glide on throttle failsafe. That
can be a better choice when flying at a R/C club field
2013-09-15 15:05:39 +10:00
Andrew Tridgell
dd6a69f588
Plane: added WP_MAX_RADIUS parameter
...
useful when using AUTO_FBW_STEER for manual steering in competitions
2013-09-13 17:43:08 +10:00
Andrew Tridgell
cc6acac1dd
Plane: added AUTO_FBW_STEER option
...
this is an unusual option that gives FBWA flight control in AUTO
mode. It is being added to support use of APM in an aerial robotics
competition where students need to pilot the plane, but they still
need waypoint triggering of payloads
2013-09-13 14:38:09 +10:00
Andrew Tridgell
de7b42e323
Plane: changed to AP_Vehicle.h
2013-09-13 11:46:54 +10:00
Andrew Tridgell
8010d7fd78
Plane: update battery pin docs
2013-09-12 13:43:22 +10:00
Andrew Tridgell
fe5a4ab710
Plane: fixed Vcc
2013-09-12 13:26:27 +10:00
Andrew Tridgell
0c8d56632e
Plane: fixed SR0 and SR3 autodocs
2013-09-12 09:53:24 +10:00
Andrew Tridgell
f6688582a6
Plane: added FENCE_ACTION=3 behaviour
...
this makes it safer to enable the geofence as a receiver failsafe
mode. It retains manual throttle control, so if it triggers on the
ground due to the receiver losing signal from the transmitter then the
throttle can be kept low, preventing an unexpected takeoff.
2013-09-08 07:31:10 +10:00
Craig3DRobotics
630095adaa
Revert "Copter: Corrected SR0 & SR3 parameter descriptions"
...
This reverts commit 6568234018
.
2013-09-06 09:58:19 -07:00
Craig3DRobotics
2b726abe0e
Plane: Correction on SR0 & SR3 parameter description.
2013-09-05 22:29:10 -07:00
Andrew Tridgell
4a8c9a7765
Plane: support reboot to bootloader
2013-09-04 11:59:16 +10:00
Andrew Tridgell
a00e4a1e83
Plane: send GCS message on relay change
...
makes it easier to debug
2013-08-30 15:05:16 +10:00
Andrew Tridgell
45cf82ba15
Plane: removed CONFIG_RELAY check
...
relay is always available
2013-08-30 14:40:47 +10:00
Andrew Tridgell
4762b3e7c6
Plane: change to 2.75beta2
2013-08-30 14:02:21 +10:00
Andrew Tridgell
a93f7c39a9
Plane: updates for new notify API
2013-08-30 13:01:35 +10:00
Randy Mackay
ad8bd16725
Plane: integrate AP_Notify
2013-08-30 13:01:35 +10:00
Andrew Tridgell
2ba9ce60e3
Plane: fixed comment
2013-08-30 13:01:34 +10:00
Andrew Tridgell
8733391315
Plane: call airspeed MAVLink logging function
2013-08-30 13:01:34 +10:00
Andrew Tridgell
5cec9b65c9
Plane: constrain calibration to roll/pitch limits
2013-08-30 13:01:34 +10:00
Andrew Tridgell
364790414c
Plane: support new RADIO_STATUS msg
2013-08-24 17:59:13 +10:00
Andrew Tridgell
b16e3e4c85
Plane: changed FBW min to 9 m/s
...
6 m/s is too dangerous for widely used planes
2013-08-18 11:42:23 +10:00
Andrew Tridgell
8dd0aa12ed
Plane: prevent GPS speed spikes at startup from breaking airspeed cal
...
the filter can be affected by a huge GPS velocity spike
2013-08-18 11:42:22 +10:00
Andrew Tridgell
4425b6af7c
Plane: update for new TECS API
2013-08-14 14:59:01 +10:00
Andrew Tridgell
accfd46633
Plane: update for new APM_Control API
2013-08-14 14:57:41 +10:00
Andrew Tridgell
8378dc9779
Plane: use reference to AHRS
2013-08-13 13:49:34 +10:00
Andrew Tridgell
5cfdf52381
Plane: change default modes to FBWA not STABILIZE
2013-08-13 13:42:27 +10:00
Andrew Tridgell
d4ca3ebf65
Plane: check for parameter send at default of 10Hz
...
50Hz can cause overruns, especially on PX4 which can drain the tx
buffer very rapidly
2013-08-13 13:42:25 +10:00
Andrew Tridgell
a33573352e
Plane: fixes for updated AP_Math and AHRS APIs
...
Pair-Programmed-With: Brandon Jones <brnjones@gmail.com>
2013-08-05 10:30:04 +10:00
Andrew Tridgell
e22f58c9fc
Plane: fixed build with OBC failsafe
2013-08-03 09:18:01 +10:00
Andrew Tridgell
890b77447a
Plane: allow integrator in stabilize mode when no stick input
...
fixes issue #472
2013-08-02 21:55:34 +10:00
Andrew Tridgell
c083c15240
Plane: use a larger serial buffer
...
this makes higher rate MAVLink possible again
2013-08-02 18:46:54 +10:00
Andrew Tridgell
c3b5f20a45
Plane: run TECS 50Hz code when throttle suppressed
...
this fixes auto-launch detection using TECS
2013-08-02 18:46:48 +10:00
Andrew Tridgell
8428779558
Plane: make it easier to find task numbers
2013-08-02 18:46:42 +10:00
Andrew Tridgell
62cc84aba3
Plane: use new scheduler load_average() function
...
this also simplifies the main loop
2013-08-02 18:46:28 +10:00
Andrew Tridgell
233b033e8c
Plane: removed old speed/altitude control algorithms
...
Use TECS only. This makes the code a lot simpler and easier to
properly document
2013-07-22 13:28:11 +10:00
Andrew Tridgell
c0697d0a2d
Plane: mark 2.75beta1
2013-07-22 12:50:30 +10:00
Andrew Tridgell
965dc228c2
Plane: fixed GUIDED mode change of altitude down
2013-07-22 12:50:02 +10:00
Andrew Tridgell
b8fa83ff54
Plane: change default slewrate to 100%/second
2013-07-22 12:50:02 +10:00
Andrew Tridgell
29c854e676
Plane: remove unused function
2013-07-22 12:50:02 +10:00
Andrew Tridgell
6e288551ab
Plane: fixed reversion to pre-failsafe mode
...
if AUTO was entered using GCS, we need to switch back to the old mode,
not control channel
2013-07-22 12:50:02 +10:00
Andrew Tridgell
74dabad1f3
Plane: added SKIP_GYRO_CAL parameter
...
useful for starting the sim at high altitudes, and for starting planes
without having to hold them still
2013-07-22 12:50:01 +10:00
Andrew Tridgell
c8a83e17d0
Plane: remove old AIR_START code
...
this was never used or tested
2013-07-22 12:50:01 +10:00
Andrew Tridgell
7673ca0bac
Plane: updates for new EAS2TAS scaling
2013-07-22 12:50:01 +10:00
Andrew Tridgell
9bbe6c1967
Plane: update to new license boilerplate for GPLv3
...
we had LGPLv2 in some places, despite the fw being GPLv3
2013-07-22 12:50:01 +10:00
Andrew Tridgell
882aa68c16
Plane: use new airspeed calibration code
...
Pair-Programmed-With: Paul Riseborough <p_riseborough@live.com.au>
2013-07-22 12:50:01 +10:00
Andrew Tridgell
53b1b9b575
Plane: added note on type of airspeed in docs
2013-07-22 12:50:01 +10:00
Andrew Tridgell
2d5deddd30
Plane: set mode CIRCLE on short failsafe in AUTO
...
this makes the code match the docs
2013-07-22 12:50:00 +10:00
Andrew Tridgell
9b70675b12
Plane: check the control switch a bit more often
...
faster response to mode changes
2013-07-22 12:50:00 +10:00
Andrew Tridgell
6ed78c89ac
Plane: don't read control switch when ch3 is in failsafe
...
use ch3_counter not just the final flag
2013-07-22 12:50:00 +10:00
Andrew Tridgell
51b9cf3e76
Plane: move failsafe variables into a structure
...
this makes the logic a bit easier to follow
2013-07-22 12:50:00 +10:00
Andrew Tridgell
608345415b
Plane: pass aircraft parameters to attitude controllers
...
also cope with rename of airspeed min/max variables
Pair-Programmed-With: Paul Riseborough <p_riseborough@live.com.au>
2013-07-18 14:53:37 +10:00
Andrew Tridgell
a4f49a28fb
Plane: prepare for 2.74b release
2013-07-16 09:45:32 +10:00
Andrew Tridgell
e27dd14bcc
Plane: fixed FBWB aileron control
2013-07-16 09:44:23 +10:00
Andrew Tridgell
e8355905dd
Plane: prepare for 2.74 release
2013-07-15 11:19:38 +10:00
Andrew Tridgell
dbd47b2a30
Plane: make TECS the default speed/height controller
2013-07-15 11:12:24 +10:00
Andrew Tridgell
ec21922233
Plane: make wp_distance static
...
removed hack in AP_Camera library
2013-07-15 09:56:28 +10:00
Andrew Tridgell
3ba713352f
Plane: use update_aux() for setting up extra channels
2013-07-15 09:56:12 +10:00
Andrew Tridgell
ed20c4cbc8
Plane: fixed initial reporting of battery remaining
...
we were not showing battery remaining 100% until we used some battery
2013-07-14 21:59:15 +10:00
Andrew Tridgell
e80d73df93
Plane: expand docs for TRIM_AUTO
2013-07-14 21:23:15 +10:00
Andrew Tridgell
4087fde140
Plane: enable CTUN log message by default
2013-07-14 21:10:12 +10:00
Andrew Tridgell
e79023ceee
Plane: fixed problem with slow ground station connects
...
don't trigger the "scheduler out of time" code when in the delay
callback
Thanks to Marijm Slootweg for noticing this!
2013-07-14 17:28:34 +10:00
Andrew Tridgell
d4db2231d4
Plane: change to 2.73beta4
2013-07-13 21:47:22 +10:00
Andrew Tridgell
dc024d425a
Plane: re-do roll hanging in ACRO mode
...
this avoids the euler angle zeros of the previous method by using a
gyro integrator on the roll axis
Pair-Programmed-With: Paul Riseborough <p_riseborough@live.com.au>
2013-07-13 21:45:58 +10:00
Andrew Tridgell
b37f79d307
Plane: update for new APM_Control API
2013-07-13 21:45:58 +10:00
Andrew Tridgell
113bc20f8a
Plane: added a new CRUISE flight mode
...
See
http://diydrones.com/group/apmusergroup/forum/topics/feature-request-hold-heading-mode
this fixes issue #438
2013-07-13 21:45:58 +10:00
Andrew Tridgell
399970e76f
Plane: fixed default deadzone for the throttle channel
...
this is the 2nd half of the fix for issue #303
2013-07-13 13:19:25 +10:00
Andrew Tridgell
826ad6c086
Plane: unlock roll and pitch when we enter ACRO mode
2013-07-13 12:34:34 +10:00
Randy Mackay
1772a62415
Plane: fix to gps present check in mavlink extended status 1 msg
2013-07-13 10:27:39 +09:00
Andrew Tridgell
ea9ae31a7a
Plane: fixed a bug with altitude drift in FBWB mode
...
not taking account of deadzone correctly
2013-07-12 21:17:09 +10:00
Andrew Tridgell
cc57bfcf12
Plane: fixed handling of deadzone in ACRO mode
...
RC_Channel norm_input() does not take account of the dead zone
2013-07-12 17:54:51 +10:00
Randy Mackay
9df93881fb
Plane: set_dead_zone renamed to set_default_dead_zone
...
Change in use of parameter means value passed in should be 1/2 what it
was previously
2013-07-12 11:44:18 +09:00
Andrew Tridgell
f300df5fd1
Plane: added FS_LONG_TIMEOUT and FS_SHORT_TIMEOUT parameters
...
this is to address the issue raised here:
http://diydrones.com/forum/topics/ardupilot-circle-mode
2013-07-12 11:56:04 +10:00
Andrew Tridgell
73928b82a6
Plane: fixed FBWB airspeed control
...
thanks to Gabor for reporting this!
2013-07-11 11:58:54 +10:00
Andrew Tridgell
1d04290eab
Plane: change to 2.74beta3
2013-07-11 11:58:54 +10:00
Andrew Tridgell
11a4628409
Plane: added ACRO mode to mode choices
2013-07-11 09:10:41 +10:00
Andrew Tridgell
fc67f51901
Plane: added ACRO_ROLL_RATE and ACRO_PITCH_RATE parameters
...
default to 180 degrees/second, which seems reasonable
2013-07-11 09:10:41 +10:00
Andrew Tridgell
608007361b
Plane: added initial implementation of ACRO mode
...
rate based control with attitude locking
2013-07-11 09:10:41 +10:00
Andrew Tridgell
2005d5642a
Plane: fixed a documentation string
...
GND_ALT_OFFSET is now for barometric corrections
2013-07-10 14:46:22 +10:00
Andrew Tridgell
3c97fad2ec
Plane: changes for GPS field changes
2013-07-10 14:04:22 +10:00
Andrew Tridgell
7aa360b176
Plane: added relative_altitude helper functions
...
prevents some code duplication
2013-07-10 14:04:22 +10:00
Paul Riseborough
971d36f06b
Plane: added height to 10Hz TECS call
2013-07-10 14:04:22 +10:00
Andrew Tridgell
3c177867a4
Plane: allow enable/disable of camera log messages in CLI
2013-07-10 12:23:36 +10:00
Andrew Tridgell
f7c8d1e1ee
Plane: use current_loc.alt for altitude to TECS
2013-07-10 11:55:35 +10:00
Craig@3DR
7f4336430a
Plane: trigger picture + logging on camera update_location()
2013-07-10 08:40:01 +10:00
Paul Riseborough
a4f3180e2a
Plane: added support for throttle nudging with TECS
2013-07-09 20:51:03 +10:00
Paul Riseborough
c34803db13
Plane: pass in adjusted height above field to TECS
2013-07-09 09:25:55 +10:00
Andrew Tridgell
9f612f6f78
Plane: only call TECS when throttle is not suppressed
...
this helps prevent integrator buildup on the ground
2013-07-08 12:07:50 +10:00