Commit Graph

1393 Commits

Author SHA1 Message Date
QioTek ca6102ed28 f103Qiotek_Periph
f103Qiotek_Periph
2021-04-24 07:48:40 +10:00
QioTek 1de3135d14 HAL_ChibiOS: added f103-QiotekPeriph hwdef (#1)
HAL_ChibiOS: added f103-QiotekPeriph
2021-04-24 07:48:40 +10:00
Andy Piper 42ebc13e6c Revert "AP_HAL_ChibiOS: support 6 bi-directional dshot channels on the MatekH743"
This reverts commit f9d166edf6.
2021-04-22 18:39:06 +10:00
Andrew Tridgell 6764f039ca HAL_ChibiOS: added support for the new H7 luminousbee version 5 2021-04-21 20:41:34 +10:00
Andy Piper f9d166edf6 AP_HAL_ChibiOS: support 6 bi-directional dshot channels on the MatekH743 2021-04-21 17:18:53 +10:00
Andy Piper 558631918c AP_HAL_ChibiOS: add %age of total to thread statistics
don't display meaningless thread info
2021-04-21 17:14:11 +10:00
Andrew Tridgell 961e538cc0 HAL_ChibiOS: reduced flash usage on MatekF405
overflowing by 1k
2021-04-21 07:12:55 +10:00
Andrew Tridgell eca8cf3414 HAL_ChibiOS: save flash on boards that are critically low
move to single OSD font on some boards

this saves about 12k on these boards. They were also extremely close
to overflowing flash, under 2k on some

Now that we support having an OSD font on the microSD card (where
available) we can reduce built in fonts without a large functionality
impact

This also disables some less used features on these boards:

 - generator support
 - object avoidance path planning
 - precision landing

This will give us some breathing room on these boards
2021-04-13 09:58:59 +10:00
anbello 77998fb5ba revo-mini bdshot 2021-04-07 17:44:29 +10:00
anbello dcb90c7bdb revo-mini ext i2c 2021-04-07 17:26:56 +10:00
Andy Piper be39e1f297 AP_HAL_ChibiOS: correct current scale for BeastH7 and BeastF7 2021-04-07 17:25:19 +10:00
Andy Piper aa0ec0f091 AP_HAL_ChibiOS: optimize BeastH7 compilation 2021-04-07 17:25:19 +10:00
Andrew Tridgell 61c829d624 HAL_ChibiOS: only use SRAM4 for DMA for now
we can enable others when we have an allocation interface that
specifies the peripheral type
2021-04-07 17:10:45 +10:00
Iampete1 2377d33417 AP_HAL_ChibiOS: H7 set SRAM4 to no cache and allow DMA 2021-04-07 17:10:45 +10:00
Andy Piper b3dbc21fa7 AP_HAL_ChibiOS: KakuteF7 bdshot configuration, tested by yaapu 2021-04-06 11:33:53 +10:00
Andrew Tridgell 45477f6063 HAL_ChibiOS: fixed default MSP port for f405-MatekGPS 2021-04-05 11:02:32 +10:00
Andrew Tridgell ca948171fe HAL_ChibiOS: fixed ADC error on revXY STM32H7 boards
with the new ChibiOS revision we were configuring for newer revisions
of the H7, which meant that we changed the ADC config. This broke ADC
readings on revX and revY H7 MCUs.

This PR fixes it in two ways:

 1) change ChibiOS config to assume XY config chips

 2) use 16 bit ADC for H7, which means the chip rev doesn't matter,
    and also gives us 16x the resolution for ADC readinga, so we can
    read smaller voltage and current values
2021-04-05 11:01:03 +10:00
willpiper 94bdca7f6f AP_HAL_ChibiOS: tidy up beastF7 DMA channels 2021-04-04 16:51:19 +10:00
Andrew Tridgell f0d6b79e8a HAL_ChibiOS: fixed skyviper builds with BMM150 2021-03-30 13:31:50 +09:00
Andrew Tridgell 2d4dfe8a2a HAL_ChibiOS: fixed (unused) FF_FS_TIMEOUT
this change was harmless as we don't define FF_FS_REENTRANT
2021-03-23 12:01:20 +11:00
Andrew Tridgell ffb2876f58 HAL_ChibiOS: disable unused ChibiOS features 2021-03-23 12:01:20 +11:00
Andrew Tridgell b4e4d48e52 HAL_ChibiOS: switch OMNIBUSF7V2 timer for RCIN
this avoids a conflict with shared interrupt on TIM1
2021-03-23 12:01:20 +11:00
Andrew Tridgell ff31e10d9e HAL_ChibiOS: ensure that RCIN DMA channel is not shared
RCIN DMA cannot be shared as it runs all the time
2021-03-23 12:01:20 +11:00
Andrew Tridgell 2842730868 HAL_ChibiOS: fixed F3 CAN build 2021-03-23 12:01:20 +11:00
Andrew Tridgell 2fc7ea1a8b HAL_ChibiOS: added G4-ESC hwdef 2021-03-23 12:01:20 +11:00
Andrew Tridgell ac9e6ba86d HAL_ChibiOS: fix label for CCM on G4 2021-03-23 12:01:20 +11:00
Andrew Tridgell f57b1b9c4b HAL_ChibiOS: support logical/physical CAN bus mapping
allow for first CAN interface to be CAN2 or CAN3
2021-03-23 12:01:20 +11:00
Andrew Tridgell 2f7ff778be HAL_ChibiOS: fixed bug in DMA resolver
idsets can be empty for a peripheral
2021-03-23 12:01:20 +11:00
Andrew Tridgell 439a944801 HAL_ChibiOS: added support for STM32G474 MCU 2021-03-23 12:01:20 +11:00
Andy Piper e1d71486e4 AP_HAL_ChibiOS: build fixes for ChibiOS 20.3.x 2021-03-23 12:01:20 +11:00
Andrew Tridgell 5b59445471 AP_HAL_ChibiOS: fixes for build with 20.3.x ChibiOS 2021-03-23 12:01:20 +11:00
QioTek fe30612bb0 AP_HAL_ChibiOS: release ICM20649 reserve sensor
BMI055 & BMI088 out of stock, release ICM20649 reserve sensor
2021-03-22 19:05:03 +11:00
Andrew Tridgell bbd32844d1 HAL_ChibiOS: switch more boards to 32k FRAM
this enables the parameter backup/restore on those boards, as well as
more waypoints

This is in response to a report that CUAVv5 boards can suffer from the
parameter reset issue
2021-03-21 11:59:12 +11:00
Andy Piper bb270014e7 AP_HAL_ChibiOS: make sure LEDs get a DMA channel on MatekH743-bdshot 2021-03-17 18:28:01 +11:00
Andrew Tridgell 8a8db85b9c HAL_ChibiOS: fixed build of f103-trigger fw 2021-03-16 18:28:58 +11:00
Lava Chemist 4a52f945db AP_HAL_ChibiOS: Add FlywooF745 2021-03-16 11:27:23 +11:00
Andy Piper d6575fb6ad AP_HAL_ChibiOS: bdshot configs for CubeYellow and mRoControlZeroH7 2021-03-03 18:02:26 +11:00
Andrew Tridgell 4fbdb59398 HAL_ChibiOS: prevent sharing the same DMA stream on TIMn_UP channels
this avoids an issue with DShot where we run the same DMA stream on
two timers at once
2021-03-02 11:58:38 +11:00
Andy Piper 6cb263056d AP_HAL_ChibiOS: build fix for iomcu 2021-03-02 11:58:38 +11:00
Andy Piper d0e4d510cf AP_HAL_ChibiOS: order PWM timers by DMA UP stream id to prevent deadlocks in dshot 2021-03-02 11:58:38 +11:00
Andrew Tridgell 243cf2199d HAL_ChibiOS: disable shared DMA on IOMCU
this saves about 600 bytes of ram
2021-02-24 18:21:08 +11:00
Mirko Denecke edc2b0c94e AP_HAL_ChibiOS: fix copy and paste typo 2021-02-23 08:15:50 +09:00
Andrew Tridgell 7af20e9ea3 HAL_ChibiOS: increase H7 serial buffer sizes
this takes better advantage of the new UART code. Log download over
USB gets to 730 kbyte/s. For comparison, with the 4.0 code on the same
H7 we get about 300 kbyte/s
2021-02-20 20:49:45 +11:00
Andrew Tridgell 5e0f175223 HAL_ChibiOS: adjust UART buffer sizes for new UART code
this gains about 20k of RAM, and has almost no impact on log download
speed at 921600 on a F427. The improved threading means we can afford
to have smaller buffers
2021-02-20 14:37:11 +11:00
Andy Piper 94de238751 AP_HAL_ChibiOS: disable RCOUT thread on iomcu and rebuild iomcu. 2021-02-20 14:37:11 +11:00
Andy Piper f9c5f9be00 AP_HAL_ChibiOS: make dshot DMA unlock event driven in order to allow unlocking from rcout thread
refactor rcout into separate thread and process all dshot requests there
move uart DMA completion to event model
process dshot locks in strick reverse order when unlocking
convert Shared_DMA to use mutexes
move UART transmit to a thread-per-uart
do blocking UART DMA transactions
do blocking dshot DMA transactions
trim stack sizes
cancel dma transactions on dshot when timeout occurs
support contention stats on blocking locking
move thread supression into chibios_hwdef.py
invalidate DMA bounce buffer correctly
separate UART initialisation into two halves
cleanup UART transaction timeouts
add @SYS/uarts.txt
move half-duplex handling to TX thread
correct thread statistics after use of ExpandingString
set unbuffered TX thread priority owner + 1
correctly unlock serial_led_send()
don't share IMU RX on KakuteF7Mini
observe dshot pulse time more accurately.
set TRBUFF bit for UART DMA transfers
deal with UART DMA timeouts correctly
don't deadlock on reverse ordered DMA locks
change PORT_INT_REQUIRED_STACK to 128
2021-02-20 14:37:11 +11:00
mateksys 7eb4e9b370 AP_Periph: set PORT defaults for F405-MatekGPS 2021-02-18 11:51:50 +11:00
mateksys 97c2b7228e AP_Periph: Matek F303 and F405 AP_Periph use DSP310 baro 2021-02-18 11:51:50 +11:00
Michael du Breuil c0da87c066 AP_HAL_ChibiOS: Update HitecMosaic to reflect changes to GPS config 2021-02-15 16:31:45 -07:00
Andrew Tridgell 9de1519928 HAL_ChibiOS: prevent hw flow control from hogging a DMA channel
When hw flow control is enabled check the CTS pin before we grab the
DMA channel to prevent a long timeout trying to send to a blocked port
from holding a DMA channel against another device

this fixes issue #16587
2021-02-15 07:23:56 +11:00
Andrew Tridgell 098a17fe2e HAL_ChibiOS: fixed CubeOrange ADSB param name 2021-02-13 13:06:20 +11:00
Andy Piper 20d8696a0a AP_HAL_ChibiOS: BeastH7 has DPS310 baro 2021-02-10 18:33:59 +11:00
Andrew Tridgell 814393c9c2 HAL_ChibiOS: switch from DPS280 to DPS310 in boards that use the DPS310 2021-02-09 11:37:07 +11:00
Andrew Tridgell 86fda93781 HAL_ChibiOS: added heater correction of AK09916
this fixes a problem with the internal compass being impacted by the
magnetic field from the heater
2021-02-09 11:32:19 +11:00
Andrew Tridgell 2ab8ad0ef0 HAL_ChibiOS: added Durandal pinout details 2021-02-09 07:14:02 +11:00
Michael du Breuil 623951a262 AP_HAL_ChibiOS: Add some extra GPS SBF config 2021-02-05 11:52:29 -07:00
Andy Piper 2cdc202d19 AP_HAL_ChibiOS: use non-cachable SRAM3 for DMA on H743
Adjust SRAM1+SRAM2 to 256k as describe in the H743 reference manual
Provide access to mem_info() information

Co-authored-by: Andrew Tridgell <andrew@tridgell.net>
2021-02-03 23:35:44 +11:00
Andy Piper 06a1500f98 AP_HAL_ChibiOS: ensure GPIO pins get undef'ed properly
minimise bi-directional dshot configs for:

CubeOrange
Durandal
MatekF405
MatekH743
OmnibusNanoV6
Pixracer
mRoPixracerPro
omnibusf4pro
CUAV-X7
2021-02-03 18:49:06 +11:00
Michel Pastor 41f7587637 ChibiOS: Add SWD pins to SuccexF4 bootloader 2021-02-03 18:37:46 +11:00
auturgy 24268cc6de AP_HAL_ChibiOS: add MatekH743-periph hwdef 2021-02-03 18:17:44 +11:00
mateksys b91c65b4a4 AP_HAL_ChibiOS: add f405-MatekGPS & MatekF405-CAN hwdef 2021-02-03 18:09:35 +11:00
huhen 9ba35580db HAL_ChibiOS: Init kakutef7 motor pins for correct initialization of some ESCs 2021-02-03 13:13:32 +11:00
Andy Piper 6f5d5c2bf9 AAP_HAL_ChibiOS: allow asserts to be printed on a GPIO pin 2021-01-27 19:36:58 +11:00
Andy Piper 20d928a86a AP_HAL_ChibiOS: don't share DMA on OmnibusNanoV6 for Flash SPI 2021-01-27 19:04:49 +11:00
Andy Piper 873d35acd9 AP_HAL_ChibiOS: bi-directional dshot for MatekH743 2021-01-27 18:58:38 +11:00
Andy Piper 877dde4736 AP_HAL_ChibiOS: on BeastF7 share TIM3 UP/CH and give flash SPI dedicated channel 2021-01-27 18:54:43 +11:00
Andy Piper 2823fa7245 AP_HAL_ChibiOS: never write bytes that have not been erased on H7
Be more careful about flash failure conditions on H7
2021-01-27 18:30:36 +11:00
Andy Piper 78735a946e AP_HAL_ChibiOS: allow STM32_FLASH_DISABLE_ISR for H7 2021-01-27 18:30:36 +11:00
Andrew Tridgell d81c2ee407 HAL_ChibiOS: allow for some embedded parameters on AP_Periph builds 2021-01-21 06:19:46 +11:00
bugobliterator 8b90eb23e0 AP_HAL_ChibiOS: distcc doesn't like lst generation commands 2021-01-20 19:21:14 +11:00
Andy Piper 9e641a32ad AP_HAL_ChibiOS: don't share flash SPI on BeastH7 and compile with -Os 2021-01-20 18:12:57 +11:00
bugobliterator c02c546077 AP_HAL_ChibiOS: add support for inline comments in hwdef.dat 2021-01-18 09:37:11 +11:00
bugobliterator 41693403e2 AP_HAL_ChibiOS: retain memory of past conflicts in dma_resolver 2021-01-18 09:37:11 +11:00
Andrew Tridgell f93e2f6717 HAL_ChibiOS: enable 32k FRAM on H7 boards 2021-01-16 06:47:10 +11:00
pkocmoud 7b61a4d8c2 HAL_ChibiOS: support F7 with no crystal 2021-01-15 15:48:01 +11:00
Andy Piper cb5be4fcc1 AP_HAL_ChibiOS: don't share IMU DMA on MatekH743 to avoid SPI DMA contention 2021-01-15 14:32:39 +11:00
Andy Piper e781572d53 AP_HAL_ChibiOS: support iFlight BeastF7
reduce DMA contention on BeastH7 and correct sharing
add README's for BeastF7 and BeastH7
2021-01-13 18:09:33 +11:00
bugobliterator 4346264113 AP_HAL_ChibiOS: ensure UP and CH timer channels share DMA for H7 2021-01-12 10:45:03 +11:00
Andrew Tridgell 14433c3ae3 HAL_ChibiOS: enable ICM-40609 on mRoNexus 2021-01-11 14:43:35 +11:00
Andrew Tridgell afbdd69165 AP_HAL_ChibiOS: adjust stack sizes 2021-01-10 08:28:55 +11:00
Andy Piper 8fb403c569 AP_HAL_ChibiOS: make sure BDMA channels are not adjacent 2021-01-10 08:11:37 +11:00
Andrew Tridgell 42bc9adfb7 HAL_ChibiOS: use ExpandingString for @SYS buffers 2021-01-05 10:52:00 +11:00
Andrew Tridgell 324ff178d8 HAL_ChibiOS: fixed CUAV_GPS defaults.parm 2021-01-03 16:24:12 -08:00
Tom Pittenger 113f792ad1 AP_HAL_ChibiOS: update periph targets who have buzzer/LEDs with notify 2021-01-03 16:24:12 -08:00
Hwurzburg ce361e51bf HAL_ChibiOS: Reinstate HAL_MINIMIZE_FEATURES for 1MB F7 boards 2021-01-02 08:57:47 +11:00
Andrew Tridgell e260c7ad59 HAL_ChibiOS: update f303-MatekGPS to allow disable of MSP
and use DMA for MSP
2021-01-01 15:40:13 +11:00
David B. Bitton 8dbe0a71ba AP_HAL_ChibiOS: add support for Toshiba LED 2020-12-31 11:02:10 -08:00
Andy Piper 401e5c2073 AP_HAL_ChibiOS: add support for bidir DShot support in RCOutput
add support for sampling GPIO pins using timer
don't restart pwm group when not doing bi-dir
fix hwdef generation preproc for TIM DMA
decode telemetry at the start of the dshot cycle
calculate dshot pulse separation correctly and ensure we output rapidly enough
calculate dshot min periods and timeouts correctly
refactor dshot_send() into dshot_send_groups()
use bi-dir dshot channel mask
selectively enable bi-dir RC Channels
process bi-dir mask correctly when allocating DMA channels
allow UP and CH DMA channel sharing
optionally enable bidir vars in hwdef.

enable bi-dir dshot in KakuteF7Mini
enable bi-dir dshot in OmnibusF4Pro
enable bi-dir dshot in OmnibusNanoV6
enable bi-dir dshot in MatekF405
enable bi-dir dshot in fmuv5
enable bi-dir dshot in fmuv3
enable bi-dir dshot in OmnibusF7V2
enable bi-dir dshot in OmnibusNanoV6
enable bi-dir dshot in CubeOrange
enable bi-dir dshot in Pixracer
enable bi-dir dshot in mRoPixracerPro

Co-authored-by: bugobliterator <siddharthbharatpurohit@gmail.com>
2020-12-30 19:14:16 +11:00
Andy Piper 83c8807b39 AP_HAL_ChibiOS: when HAL_ENABLE_THREAD_STATISTICS is defined add ChibiOS thread stats to threads.txt
define HAL_ENABLE_THREAD_STATISTICS in hwdef.h
2020-12-30 18:15:05 +11:00
Andy Piper a4b2930223 AP_HAL_ChibiOS: iFlight Beast H7 AIO hwdef 2020-12-30 18:13:03 +11:00
ukmook bf34041211 AP_HAL_ChibiOS: add support for Pixracer-periph 2020-12-29 07:52:39 -07:00
Tom Pittenger 5432c9957a AP_HAL_ChibiOS: rename AP_PERIPH_<feature>_DEFAULT to HAL_PERIPH_<feature>_DEFAULT 2020-12-28 09:16:02 +11:00
Tom Pittenger 083088bfff AP_HAL_ChibiOS: adjust defaults to use param instead of hardcoded defaults 2020-12-25 16:24:50 -07:00
Ari Krupnik 79e1f5e8bd AP_HAL_ChibiOS: standard spelling of variant 2020-12-25 00:01:50 +11:00
Phillip Kocmoud 062c6cef41 HAL_ChibiOS: Fix typo relating to pin PB7:I2C4_SDA 2020-12-23 06:43:19 +11:00
Siddharth Purohit 5b58163c35 AP_HAL_ChibiOS: add HAL_PERIPH_ENABLE_RCOUT_TRANSLATOR to CubeBlack-periph and CubeOrange-periph 2020-12-21 18:27:07 -08:00
Tom Pittenger da74d755d0 AP_HAL_ChibiOS: add new HAL_PWM_COUNT define 2020-12-21 18:27:07 -08:00
Tom Pittenger f670f7a9b6 AP_HAL_ChibiOS: change ADSB to use param ADSB_PORT instead of define 2020-12-17 23:24:04 -08:00
Tom Pittenger 5c98e18236 AP_HAL_CubeORange-periph: enable HAL_PERIPH_ALLOW_MAVLINK_UART_OR_USB_REBOOT_CMD on USB 2020-12-18 06:59:09 +11:00
Andrew Tridgell b4201436dd HAL_ChibiOS: fixed flash space on 16k bl boards
this avoids the stm32_flash_recent_erase() function which added around
800 bytes to the bootloader. It is not needed
2020-12-17 12:51:25 +11:00
Sebastian Witt 6cfaae4e7d AP_HAL_ChibiOS: Support for Diatone MambaF405 MK2 2020-12-16 19:07:07 +11:00
Andrew Tridgell e54fc4b0de AP_HAL_ChibiOS: convert to using hal.serial() instead of hal.uartX 2020-12-15 10:32:46 +11:00
Phillip Kocmoud ce87b62dcc AP_Periph: Add alternate ordering of NCP5623 LED colors 2020-12-12 14:57:35 +11:00
Tom Pittenger 68b2982cc6 AP_HAL_ChibiOS: CubeBlack/Orange-periph to use default HAL_SUPPORT_RCOUT_SERIAL 2020-12-09 07:53:09 -08:00
Tom Pittenger 2203bf2400 AP_HAL_ChibiOS: Add f303-periph default RANGEFINDER_MAX_INSTANCES 1 2020-12-09 18:05:24 +11:00
Andrew Tridgell 0c440d5675 HAL_ChibiOS: cope with flash erase in expected delay
when there has been a flash erase when we are definately in an
expected delay
2020-12-08 13:22:36 +11:00
Andrew Tridgell b4de6fb56a HAL_ChibiOS: added new option DEFAULTGPIO for hwdef.dat
this allows ESD issues to be avoided by pulling all unused pins low
2020-12-08 11:21:57 +11:00
Andrew Tridgell f44e4aaefb HAL_ChibiOS: always set STM32_DMA_REQUIRED for non-bootloader
this fixes an issue for uart-only AP_Periph builds
2020-12-08 10:27:27 +11:00
Andrew Tridgell b1e7b508db HAL_ChibiOS: added HitecMosaic 2020-12-06 16:48:08 +11:00
Andrew Tridgell 1723cf8efb HAL_ChibiOS: reduce SPI clock on MatekH743 mpu6k to 2MHz
this fixes regular transfer errors
2020-12-06 13:04:52 +11:00
Tom Pittenger e235fd311e AP_HAL_ChibiOS: fixed comment in script file 2020-12-03 20:33:51 +11:00
Andrew Tridgell 6765265a3b AP_Periph: switched to 1kHz clock for f303-periph
and use CAN RX buffer size of 64.

This makes for more efficient CPU usage on f3, and fixes an issue with
lost CAN parameter replies causing timeouts in the CAN parameter
download protocol
2020-12-03 20:00:55 +11:00
Andrew Tridgell b289701d20 HAL_ChibiOS: removed SPI devices on f103-periph
these are unused and saves us a couple of k of flash
2020-12-03 15:50:50 +11:00
Phillip Kocmoud 38dd3b9209 hwdef: add mRo Control Zero Classic 2020-12-01 15:19:50 +11:00
Phillip Kocmoud bef522387a hwdef: add mRo Control Zero H7 2020-12-01 14:46:55 +11:00
Andrew Tridgell cf22caa7ef HAL_ChibiOS: raise stack limits in f303 peripherals 2020-12-01 11:14:50 +11:00
Andrew Tridgell ba69cd72c9 HAL_ChibiOS: improved stack checking and stack display
display both ISR stack and thread stacks. Show total stack sizes as
well as amount of stack remaining
2020-12-01 11:14:50 +11:00
Andrew Tridgell 84eac7642b HAL_ChibiOS: improved stack checking 2020-12-01 11:14:50 +11:00
Andrew Tridgell c778d14fd3 HAL_ChibiOS: enable stack checking on f303 boards 2020-12-01 11:14:50 +11:00
Andrew Tridgell 573cd6db6d HAL_ChibiOS: adjust MAIN_STACK for more ISR stack
we need more stack to deal with interrupt nesting between CAN, system
timer and serial interrupts
2020-12-01 11:14:50 +11:00
Andrew Tridgell 2a29b0fcf5 HAL_ChibiOS: fixed AP_Periph build with --enable-asserts 2020-12-01 11:14:50 +11:00
Andrew Tridgell 4d171ec19a AP_HAL_ChibiOS: support uartI, allowing a total of 9 uarts
this allows for OTG2 on the MatekH743 board, which makes SLCAN much
easier
2020-11-30 14:09:31 +11:00
Phillip Kocmoud c9182b39d5 hwdef: mRo Control Zero H7 OEM - update and improve uniformity 2020-11-30 08:48:36 +11:00
Phillip Kocmoud b55920165a hwdef: mRo Pixracer Pro - update and improve uniformity 2020-11-30 08:48:36 +11:00
Phillip Kocmoud a379bb8fc5 hwdef: mRo Control Zero F7 update and improve uniformity 2020-11-28 20:28:22 +11:00
Andrew Tridgell a587195912 HAL_ChibiOS: change f303-MatekGPS to 5Hz by default 2020-11-27 19:41:33 +11:00
Tom Pittenger 67405cedb2 AP_HAL_ChibiOS: add AP_BattMonitor support to CubeBlack&Orange-periph 2020-11-25 14:20:53 +11:00
斯东Stone 4990048efb HAL_ChibiOS: Correct a typo and Update product link url for PH4-mini 2020-11-24 12:48:11 +11:00
QioTek e4f4868d9b HAL_ChibiOS: add QMC5883L on QioTekZealotF427
add QMC5883L on QioTekZealotF427
2020-11-22 06:10:34 +11:00
Marek Łukasiewicz 64f208cbec HAL_ChibiOS: Add af_parse for CubeMX pinout csv 2020-11-18 18:39:07 +11:00
Phillip Kocmoud 701ab83f01 HAL_ChibiOS: Added support for mRo ControlZero OEM H7 flight controller 2020-11-18 18:28:24 +11:00
Andrew Tridgell 408f8b3940 HAL_ChibiOS: added check for overwrite of nullptr on H7
the STM32H7 has 64k of ITCM memory at address zero. We allow
allocation of everything except the first 1024 bytes. This checks for
those reserved bytes being overwritte, which would indicate a write to
nullptr
2020-11-18 17:14:43 +11:00
Andrew Tridgell 95a823a702 HAL_ChibiOS: added link list of all memory allocations
check all allocations for corruption on free() and malloc_check()
2020-11-18 17:14:43 +11:00
Andrew Tridgell ce3e1a69ec HAL_ChibiOS: added memory guard system 2020-11-18 17:14:43 +11:00
Huibean cf2b89c4f1 AP_HAL_ChibiOS:add mazzy star drone hwdef 2020-11-17 17:57:07 +11:00
Tom Pittenger e0e3c23a87 AP_HAL_ChibiOS/hwdef: fix misprint in comment 2020-11-14 08:00:40 +11:00
Marek Łukasiewicz 8813057b4c AP_HAL_ChibiOS: Tweak sorting to be py2/py3 compatible 2020-11-12 10:27:31 +11:00
Andrew Tridgell 17b4198921 HAL_ChibiOS: add WITH_FATFS to environment 2020-11-10 16:15:45 +11:00
Andrew Tridgell bb3b59966f HAL_ChibiOS: define INS_MAX_INSTANCES if less than 3
save some flash and memory
2020-11-10 16:15:45 +11:00
Andrew Tridgell cb034c50a7 HAL_ChibiOS: fixed orientation of compass on M10070B 2020-11-08 16:13:17 +11:00
Andrew Tridgell 3b7b2b89a5 HAL_ChibiOS: added baro for mRo Location-one GPS 2020-11-08 16:13:17 +11:00
Phillip Kocmoud c192efea0a hwdef:PixracerPro - Fix analog volt pin assignments 2020-11-03 08:17:54 +11:00
Andrew Tridgell 46976c4358 HAL_ChibiOS: fixed remapping of ioline_t with BRD_ALT_CONFIG
when a peripheral is made available via BRD_ALT_CONFIG we need to
remap the existing ioline_t in the UART and I2C drivers to use the new
pin.

This fixes an issue with half-duplex, inverted, swapped UART pins for
protocols like FPort and FPort2
2020-10-28 19:51:45 +11:00
Andrew Tridgell 96f7397099 HAL_ChibiOS: make PowerC primary power on CUAV-X7
CUAV considers the CAN power to be the main power for this board
2020-10-24 08:27:21 +11:00
Michael Oborne b383db15c7 ChibiOS: fix cubeblack+ name and usbid 2020-10-24 08:26:55 +11:00
Andrew Tridgell fb1dcdb059 HAL_ChibiOS: added BL suffix to bootloader USB IDs for two boards
our convention is to have -BL on end of USB product IDs in bootloaders
2020-10-13 17:59:13 +11:00
Andrew Tridgell 418bd33c43 HAL_ChibiOS: fix CUAV-X7 power bits 2020-10-13 17:58:30 +11:00
bugobliterator 5880628b01 hwdef: add support for CubeBlack-periph 2020-10-08 09:31:35 +11:00
QioTek f04de7d610 HAL_ChibiOS: Add QioTekZealotF427 build target
I've added the hwdef to support the QioTekZealotF427

It has 3 IMU sensors(ICM20698,ICM20602,BMI055), a Compass(Ist8310),
2Baro sensors(DSP310,MS5611), an integrated analog OSD, 14motor
outputs, 4Relay output, 5uarts, 2Power Module input, an i2c, a Can.
2020-10-05 07:41:06 +11:00
Andrew Tridgell 702a3926f8 HAL_ChibiOS: setup defines for more flow control pins
allow all uarts to have flow control
2020-10-03 20:22:56 +10:00
Andrew Tridgell 5e80b10396 HAL_ChibiOS: enable telem3 on Durandal
the RCIN issue is not there in the final production boards
2020-10-03 20:22:56 +10:00
Andrew Tridgell 4b747430e1 HAL_ChibiOS: save 2k in f103 bootloader
don't include serial bl support if dev list is empty
2020-09-24 12:32:19 +10:00
Siddharth Purohit 6fb973081b AP_HAL_ChibiOS: enable all I2C compasses by default for f103 boards 2020-09-24 12:32:19 +10:00
Andrew Tridgell 0e8c8c29a8 HAL_ChibiOS: fixed f303-MatekGPS build 2020-09-24 12:32:19 +10:00
Andrew Tridgell 246e790484 AP_Bootloader: use new hal CAN interface for CAN support 2020-09-24 12:32:19 +10:00
Siddharth Purohit a79efaeb1d AP_HAL_ChibiOS: hwdef: add support for HAL CANIface based bootloader 2020-09-24 12:32:19 +10:00
Siddharth Purohit 882c86c394 AP_HAL_ChibiOS: add app start offset to leave space for params 2020-09-24 12:32:19 +10:00
Siddharth Purohit 1f16aa8360 HAL_ChibiOS: add hwdef for CubeOrange-periph 2020-09-24 12:32:19 +10:00
Siddharth Purohit 62df67a4b8 HAL_ChibiOS: hwdef: modify to use HAL CAN driver instead of ChibiOS's 2020-09-24 12:32:19 +10:00
Hwurzburg d5722b15e9 AP_ChibiOS: fix configuration number in OmnibusF7V2 hwdef 2020-09-23 07:35:22 +10:00
Hwurzburg de8002ab5e AP_HAL_ChbiOS: ALT config to enable UART3 in place of I2C 2020-09-22 09:48:02 +10:00
Hwurzburg c64f286333 AP_ChibOS: add UART7_RX to OMNIBUSF7V2 2020-09-17 10:47:18 +10:00
bugobliterator 575a56a6b6 hwdef: CubeOrange: do power reset on peripherals and sensor at boot 2020-09-16 18:08:08 +10:00
bugobliterator a2ee82d8d9 hwdef: use inv2 sensor checks in CubeOrange 2020-09-16 18:08:08 +10:00
Andy Piper 570fd59c39 AP_HAL_ChibiOS: disable OSD parameters on F7 1Mb boards with SD cards 2020-09-10 18:10:32 +10:00
Andrew Tridgell 1ffbbb2896 HAL_ChibiOS: added FLASH_TOTAL to environment 2020-09-10 07:41:25 +10:00
Andy Piper bbaaf7d66f AP_HAL_ChibiOS: disable features on KakuteF7 and OmnibusF7v2 to mirror KakuteF7Mini 2020-09-09 20:36:42 +10:00
Andrew Tridgell 90e488d29d HAL_ChibiOS: set airspeed type in f303-MatekGPS fw 2020-09-09 12:04:49 +10:00
Andrew Tridgell e95a44e73c HAL_ChibiOS: run f303-MatekGPS at 10Hz 2020-09-09 06:35:50 +10:00
Andrew Tridgell 844db20db0 HAL_ChibiOS: use a default node ID for f303-MatekGPS 2020-09-09 06:35:50 +10:00
Andrew Tridgell 9c7568eb5f HAL_ChibiOS: enable MSP output for f303-MatekGPS 2020-09-09 06:35:50 +10:00
chobits f4320c935c AP_HAL_ChibiOS: fix kakutef7/mini motor glitch when using dshot 2020-09-08 18:57:30 +10:00
vierfuffzig 63fdac0048 AP_HAL_ChibiOS: add USART3 as alt config on OmnibusNanoV6 2020-09-07 15:34:01 +10:00
Andrew Tridgell 3a252a042b HAL_ChibiOS: fixed fast sampling on F32Lightning
this SPI bus on this board can't handle 8MHz
2020-09-02 06:42:44 +10:00
Andrew Tridgell 491e82159c HAL_ChibiOS: add HAL_WITH_SPI_xx defines for SPI devices
this allows us to avoid building drivers for SPI devices we don't
have, such as OSD
2020-09-02 05:56:46 +10:00
vierfuffzig 56e44c46ca AP_HAL_ChibiOS: disable IMU fast sampling on F35 / WingFC10
fast sampling introduces random IMU glitches, bisect search identifies 9c2caf5b12 
disabling fast sampling fixes IMU back to expected behaviour. see:
https://github.com/ArduPilot/ardupilot/issues/15090
https://discuss.ardupilot.org/t/shaking-horizon-and-jittering-servos/60420
for reference
2020-08-31 19:50:09 +10:00
Andrew Tridgell 36442dc9b0 HAL_ChibiOS: added Matek CAN GPS
supports GPS, baro, mag and airspeed
2020-08-25 09:59:15 +10:00
Andrew Tridgell 4c4c3d467b HAL_ChibiOS: added f103-Airspeed sensor
for Matek CAN airspeed sensor
2020-08-25 09:59:15 +10:00
Siddharth Purohit 8dcb973dad HAL_ChibiOS: fix SWD config in f3 boards 2020-08-20 19:08:14 +10:00
Siddharth Purohit cdf8e369f1 AP_HAL_ChibiOS: create UAVCAN agnostic CANIface driver
HAL_ChibiOS
2020-08-19 17:31:09 +10:00
Andy Piper baf92a17f9 AP_HAL_ChibiOS: disable AP_Mount on "mini" boards 2020-08-04 09:18:14 +10:00
Andrew Tridgell d283dd7d00 HAL_ChibiOS: define polarity of 3.3/5v selection for PWM 2020-07-21 08:47:27 +10:00
Andrew Tridgell 99ac8e2fbe HAL_ChibiOS: enable BRD_PWM_VOLT_SEL parameter for mRoPixracerPro 2020-07-21 08:47:27 +10:00
Henry Wurzburg d78c5371db AP_HAL_ChibiOS: remove fmuv4 and update Pixracer 2020-07-13 15:24:54 +10:00
Andrew Tridgell 9f1e641637 HAL_ChibiOS: added new STM32Cube configs 2020-07-10 13:33:51 +10:00
Andrew Tridgell 84bd59a7bb HAL_ChibiOS: support H7 with no crystal 2020-07-10 13:33:51 +10:00
Andrew Tridgell cfbfb27004 HAL_ChibiOS: support no-crystal F3 setups 2020-07-10 13:33:51 +10:00
Peter Barker cadb1012df AP_HAL_ChibiOS: reenable full features on KakuteF7Mini 2020-07-02 18:38:46 +10:00
Andrew Tridgell ce8591ddbc HAL_ChibiOS: re-enable full features on KakuteF7 and OMNIBUSF7V2
we now have enough space with recent changes for these boards
2020-07-02 18:38:46 +10:00
Andy Piper c707303336 AP_HAL_ChibiOS: hold buzzer ping low in bootloader for omnibusf4pro 2020-06-30 17:58:35 +10:00
Andy Piper 48e0da8444 AP_HAL_ChibiOS: pull buzzer pin low in Kakute F7 bootloader to prevent startup scream 2020-06-30 17:58:35 +10:00
Andrew Tridgell 20b2396646 HAL_ChibiOS: fixed bug in undef of pins
revert pin to initial state on undef
2020-06-30 14:28:30 +10:00
Randy Mackay f9a866d09a AP_HAL_ChibiOS: luminousbee4 serial5 to mavlink2 2020-06-30 09:42:49 +10:00
Randy Mackay 3e0bb4110a AP_HAL_ChibiOS: fmuv4 serial5 to mavlink2 2020-06-30 09:42:49 +10:00
Randy Mackay ced448b706 AP_HAL_ChibiOS: DrotekP3Pro serial5 to mavlink2 2020-06-30 09:42:49 +10:00
MATEKSYS 903b44da7d HAL_ChibiOS: Add DPS310 for MatekF405-WING,F765-WING and H743 2020-06-22 19:35:01 +10:00
Andrew Tridgell 6fa623d074 HAL_ChibiOS: added Holybro Pix32v5 2020-06-12 21:23:16 +10:00
MATEKSYS 14e01e21b7 HAL_ChibiOS: MatekH743: move baro to I2C2 bus 2020-06-11 17:31:59 +10:00
Andrew Tridgell c1403a2e2b HAL_ChibiOS: fixed default CubeOrange pin for 2nd current sensor 2020-06-10 17:32:11 +10:00
Andrew Tridgell 6a1f43d5df HAL_ChibiOS: fixed build with our old compiler
gcc 4.9 doesn't like static_assert() in C code
2020-06-07 14:11:48 +10:00
duccan cdcdd5ce27 AP_HAL_ChibiOS: Added support for Bitcraze Crazyflie 2.1
Rework after review:
- Kept old IMU and barometer definition of crazyflie 2.0 in hwdef
- Added comment regarding soft-reset command
- Added defaults.parm for crazyflie
2020-06-07 07:49:37 +10:00
duccan 0d96c7f7a5 AP_HAL_ChibiOS: Added support for Bitcraze Crazyflie 2.1 2020-06-07 07:49:37 +10:00
James Jacobsson 8a87322d93 AP_HAL_Chibios: Adjust MatekF765-Wing voltage and current scales
The new values matches the ones from here:
http://www.mateksys.com/?portfolio=f765-wing#tab-id-5

Also verified to be a lot more accurate in real life.
2020-06-04 10:06:22 +10:00
Phillip Kocmoud 0d5a0f392c hwdef.dat update x2.1-777 2020-06-04 09:51:27 +10:00
Andrew Tridgell 571fbf8f71 HAL_ChibiOS: update power VALID pins 2020-06-04 09:51:27 +10:00
CUAVcaijie 220e6999c7 HAL_ChibiOS:Adapt to CUAV Nora V1.2 hardware 2020-05-28 19:13:49 +10:00
pkocmoud 7809dc849c HAL_ChibiOS: Added support for mRo Pixracer Pro flight controller 2020-05-27 21:22:56 +10:00
Henry Wurzburg 9c72525bbf AP_HAL_ChibiOS: Add unused LED output as GPIO in OmnibusF4Pro def 2020-05-26 10:51:32 +10:00
Henry Wurzburg 12d5602926 AP_HAL_ChibiOS: Add ability to use UART3 and UART4 in bd alt config 4 2020-05-11 14:18:35 +10:00
Andrew Tridgell 259cb0aafd HAL_ChibiOS: removed EKF2 define, not needed any more 2020-05-10 15:09:54 +10:00
Andrew Tridgell 61d036acf3 HAL_ChibiOS: added build time check for right system clock
this helps prevent cases where we underclock a chip due to mistake in
headers or hwdef.dat
2020-05-10 15:09:28 +10:00
Andrew Tridgell 69676cd614 HAL_ChibiOS: support 24MHz f3 MCUs 2020-05-10 15:09:28 +10:00
Henry Wurzburg 3f735e7e54 HAL_ChibiOS: Make full UART4 available as bd config option 2020-05-10 08:00:57 +10:00
Henry Wurzburg 225a305cb9 AP_HAL_ChibiOS:Remove alt config since its not useful (no TX available) 2020-05-10 08:00:21 +10:00
Peter Barker 967f8bf726 AP_HAL_ChibiOS: correct description of where stdout goes 2020-05-05 07:57:57 +10:00
pkocmoud defb7dc43f hwdef: add mRo M10070 Location One CAN GPS 2020-04-30 11:31:43 +10:00
Andrew Tridgell 3ec2ef787d HAL_ChibiOS: fixed build warning 2020-04-29 12:20:19 +10:00
Andrew Tridgell ce68e0fbb5 HAL_ChibiOS: fixed bootloader build 2020-04-29 07:36:55 +10:00
Andrew Tridgell 18e88e0ea3 HAL_ChibiOS: implement stack overflow hook
this needs C bindings to allow call from low level RTOS thread
switching code
2020-04-29 07:36:55 +10:00
Andrew Tridgell a5965d5a9e HAL_Chibios: removed unnecessary debug defines 2020-04-29 07:36:55 +10:00
Andrew Tridgell 2c26807736 HAL_ChibiOS: embed hwdef.dat in ROMFS for all boards 2020-04-29 07:36:55 +10:00
Andrew Tridgell 6bacf021c8 HAL_ChibiOS: disable thread_info in AP_Periph and bootloader 2020-04-29 07:36:55 +10:00
Andrew Tridgell f0c9f4003e HAL_ChibiOS: implement thread_info() 2020-04-29 07:36:55 +10:00
Andrew Tridgell ea71b72c87 HAL_ChibiOS: fixed issue with I2C4 on H743
when both I2C4 and SPI4 are active on a H743 I found that some BDMA
completion interrupts were lost, which resulted in SPI transfer
timeouts. Close inspection of the ChibiOS BDMA, I2Cv3 and SPIv3
drivers did not reveal any issues, but I found that the issue only
happened when the first 4 BDMA streams were used. This change splits
the 4 streams across the first and 2nd half of the BDMA controller,
and that fixes the problem.

This works as there are only 2 peripherals (I2C4 and SPI6) that want
to use BDMA with our current setup. If we ever wish to enable ADC3
(which also uses BDMA) we will need to revisit this issue
2020-04-28 17:42:15 +10:00
Andrew Tridgell 32cdfddf12 HAL_ChibiOS: convert all hwdef from UART_ORDER to SERIAL_ORDER
much easier to understand
2020-04-28 10:32:23 +10:00
Andrew Tridgell a52070d226 HAL_ChibiOS: use SERIAL_ORDER instead of UART_ORDER
SERIAL_ORDER is much easier for developers to understand as it maps
directly to the SERIALn_ parameters
2020-04-28 10:32:23 +10:00
Andrew Tridgell 0994655f5b HAL_ChibiOS: fixed build warnings for bootloader builds 2020-04-28 10:32:23 +10:00
Andrew Tridgell 9557a5c22c HAL_ChibiOS: added more STM32CubeMX configs 2020-04-28 10:32:23 +10:00
Andrew Tridgell a9df9fe0c0 HAL_ChibiOS: removed clock tree settings in most hwdef.dat
these are better set automatically in the headers. This simplifies the
task of doing a new port
2020-04-28 10:32:23 +10:00
Andrew Tridgell a638196334 HAL_ChibiOS: skyviper-f412-rev1 uses a custom clock tree 2020-04-28 10:32:23 +10:00
Andrew Tridgell e8b2b52bae HAL_ChibiOS: removed STM32_VDD from hwdef.dat
use default
2020-04-28 10:32:23 +10:00
Andrew Tridgell d9efac2993 HAL_ChibiOS: only allow PLL override in clock selection part of header 2020-04-28 10:32:23 +10:00
Andrew Tridgell fe765b8845 HAL_ChibiOS: switched CUAV_GPS to use same clocks as other F4 2020-04-28 10:32:23 +10:00
Andrew Tridgell 82c45f6cdb HAL_ChibiOS: default STM32_VDD to 3.3V 2020-04-28 10:32:23 +10:00
Andrew Tridgell 29f538dec9 HAL_ChibiOS: use common header for STM32 clock config
avoid the need for clock config lines in most hwdef.dat files
2020-04-28 10:32:23 +10:00
Andrew Tridgell 3d5475a1d9 HAL_ChibiOS: fixed skyviper-journey build 2020-04-28 10:32:23 +10:00
Ivannikov Kirill 3ab1b29397 AP_HAL_ChibiOS: error if system clock not 1mhz on 16 CH_CFG_ST_RESOLUTION. prevent variable overflow
if CH_CFG_ST_FREQUENCY not match 1000000U on 16 bit CH_CFG_ST_RESOLUTION
we try to multiply now *= 1000000U/CH_CFG_ST_FREQUENCY; it may overflow 16 bit value.
2020-04-26 19:58:54 +10:00
Andrew Tridgell d9e2a644ea HAL_ChibiOS: fixed Durandal buzzer in bootloader
need to pull low to avoid buzzer running in bootloader
2020-04-24 19:46:22 +10:00
Andrew Tridgell 43ac58c63b HAL_ChibiOS: added STM32CubeMX configs for H7 processor crystal varients
useful for checking clock config changes
2020-04-24 16:55:03 +10:00
Andrew Tridgell db642717be HAL_ChibiOS: fixed clock for FDCAN to be below 80MHz
we were running at 100MHz, which is out of spec
2020-04-24 16:55:03 +10:00
Andrew Tridgell 4ec1717361 HAL_ChibiOS: enable IMU temp control on CUAV-X7 2020-04-23 09:05:52 +10:00
Andrew Tridgell 56b0dddb7c HAL_ChibiOS: set IMU temp on CUAV-X7 2020-04-23 07:28:13 +10:00
Andrew Tridgell 5892e6421e HAL_ChibiOS: enable DRDY on ADIS16470 on CUAV-X7 2020-04-23 07:28:13 +10:00
Andrew Tridgell ffe773ff6f HAL_ChibiOS: use DRDY pin for ADIS16470 on mRoNexus 2020-04-23 07:28:13 +10:00
Andrew Tridgell 8e977183fe HAL_ChibiOS: added mRoNexus 2020-04-23 07:28:13 +10:00
Andrew Tridgell 6be519fb0d HAL_ChibiOS: added alt-config for UART4 on omnibusf4pro 2020-04-21 18:42:12 +10:00
Andy Piper f3b240533f AP_HAL_ChibiOS: eliminate EKF2 from fmuv2 build 2020-04-18 20:18:30 +10:00
Andrew Tridgell cac455ff2d HAL_ChibiOS: added another uart to omnibusf4v6
for RC telemetry such as Hott telem
2020-04-17 11:23:06 +10:00
vierfuffzig 7c7b199bbd AP_HAL_ChibiOS: add I2C / USART3 ALT_CONFIG for omnibusf4pro 2020-04-16 08:42:24 +10:00
Andrew Tridgell 74f33d57c5 HAL_ChibiOS: avoid unnecessary H7 flash writes 2020-04-14 10:02:51 +10:00
Andrew Tridgell 4b236e52b2 HAL_ChibiOS: added MatekH743 port 2020-04-14 10:02:51 +10:00
Andrew Tridgell 2165fd66f1 HAL_ChibiOS: define FLASH_RESERVE_END_KB 2020-04-14 10:02:51 +10:00
Henry Wurzburg e5319397b4 AP_HAL_ChibiOS: eliminate EKF2 from F4 builds not using HAL_MINIMIZE_FEATURES 2020-04-14 09:19:28 +10:00
Andrew Tridgell db4f1a1473 HAL_ChibiOS: enable ADIS16470 on SPI1 2020-04-13 15:26:02 +10:00
CUAVcaijie 942b2fd29f HAL_ChibiOS: Added support for CUAV X7 flight controller 2020-04-13 15:26:02 +10:00
bugobliterator a31f2e5d90 hwdef: add validation checks for CubeOrange 2020-04-10 07:04:21 +10:00
bugobliterator ef91f1634b HAL_ChibiOS: add support for adding board validation test 2020-04-10 07:04:21 +10:00
Andrew Tridgell 376116c99b HAL_ChibiOS: fixed skyviper-journey build 2020-04-04 10:47:15 +11:00
Henry Wurzburg a637073dad AP_HAL_Chibios: add tenth PWM output to MatekF405-Wing 2020-03-30 11:23:14 +11:00
Andrew Tridgell e0957c2bcc HAL_ChibiOS: include hwdef.dat in ROMFS
this allows download via ftp
2020-03-28 15:28:03 +11:00
Andrew Tridgell ea57b7b3cd HAL_ChibiOS: embed ROMFS files from hwdef directory
this allows for a scripts/ directory under hwdef board directory to
embed lua scripts
2020-03-28 15:28:03 +11:00
Andrew Tridgell 822460ce7d HAL_ChibiOS: fixed strdup() on ChibiOS 2020-03-28 15:28:03 +11:00
bugobliterator 8215537f99 HAL_ChibiOS: deprecate realloc for ChibiOS build, so as to return error when used 2020-03-24 10:32:14 +11:00
Andrew Tridgell 5a4b648cf5 HAL_ChibiOS: disable flash fallback for boards with FRAM
this saves on flash and prevents confusing results when fram fails
2020-03-14 13:47:25 +11:00
Andy Piper 104dd7cd75 AP_HAL_ChibiOS: remove board subtype for OmnibusNanoV6 2020-03-14 10:20:46 +11:00
Andrew Tridgell 986ad0dc27 HAL_ChibiOS: removed unnecessary subtype defines 2020-03-14 08:35:32 +11:00
Andrew Tridgell c3f2117590 HAL_ChibiOS: fixed R9Pilot board ID 2020-03-14 07:05:22 +11:00
Andrew Tridgell d35fff5186 HAL_ChibiOS: set CS pins high while in bootloader
this appears to be the root cause of the parameter resets on
CubeOrange. We need to ensure the CS pin is not floating or random
noise on the SPI bus for FRAM can cause the FRAM to become corrupt
2020-03-11 09:53:06 +11:00
Peter Barker d0edfd2c0d AP_HAL_ChibiOS: VRUBrain-v51: reduce AP_MAX_EMBEDDED_PARAM to 1024
Stops us overflowing on Copter and Plane builds
2020-03-10 10:50:18 +11:00
Andrew Tridgell 16f34778fc HAL_ChibiOS: added f103-HWESC target 2020-03-04 16:21:06 +11:00
Andrew Tridgell bca1bd2c72 HAL_ChibiOS: added f303-HWESC firmware 2020-03-04 16:21:06 +11:00
Peter Barker 1a123e5f8d AP_HAL_ChibiOS: avoid referencing flash sector/page 22 on 1MB boards 2020-03-03 10:13:53 +11:00
Andrew Tridgell ccc7d48c20 HAL_ChibiOS: reserve plenty of DMA memory for luminousbee4 2020-02-27 13:12:26 +11:00
Andrew Tridgell 5bfd607300 HAL_ChibiOS: added luminousbee4 flight controller 2020-02-27 13:12:26 +11:00
Andrew Tridgell 41b74ec014 HAL_ChibiOS: use DNA by default for all AP_Periph builds
this makes multiple sensors of the same type on the bus easier
2020-02-22 12:28:16 +11:00
Andrew Tridgell 6139860a64 HAL_ChibiOS: use default USB IDs for fmuv3 2020-02-22 12:17:05 +11:00
Andy Piper 3d0cf7e12a AP_HAL_ChibiOS: hardware M4-Cortex and M7-Cortex (and H7) implementation of HAL FFT abstraction
implements an FFT engine based on the betaflight feature using ARM hardware accelerated CMSIS library
make the FFT feature optional
add dynamic gyro windows
add quinns and candans estimators and record in DSP state
disable DSP for boards with limited flash
calculate power spectrum rather than amplitude
start/analyse version of analysis to support threading
allocate memory in a specific region
constrain window size by CPU class
control inclusion of DSP based on board size
2020-02-22 11:15:37 +11:00
pkocmoud 8c764bb568 hwdef: switch to (0) DNA as the default NODEID 2020-02-17 12:48:37 +11:00
pkocmoud 8f6d2aab7a hwdef: add mRo M10025 KITCAN 2020-02-17 12:48:37 +11:00
Andrew Tridgell bebfef369f HAL_ChibiOS: fixed power flags for CUAV-Nora 2020-02-12 21:17:49 +11:00
CUAVcaijie 561808ba3c HAL_ChibiOS: Added support for CUAV Nora flight controller 2020-02-12 21:17:49 +11:00
Andrew Tridgell 9e0edba31d HAL_ChibiOS: raised timer clocks to 200MHz
this gives more flexibility in setting up timers for DShot
2020-02-12 18:12:39 +11:00
Matt Lawrence e6f32f4572 AP_HAL_ChibiOS: Fix waf --default-parameters
If a defaults.parm file was present in the hwdef, waf ignored the --default-parameters=xyz.parm command line argument.  This will allow it to use that command line argument specified file.
2020-02-11 11:00:01 +11:00
Andrew Tridgell 12f31e328f HAL_ChibiOS: fixed dshot docs for Pixhawk4 2020-02-08 14:15:37 +11:00
Randy Mackay 76c982ced8 AP_HAL_CHibiOS: update Pixhawk4 README to 16 pwm outputs
also correct Main PWM ouput's number of groups
2020-02-08 14:14:32 +11:00
Andrew Tridgell bdef7d7158 HAL_ChibiOS: fixed default fast sampling on CubeOrange and Durandal 2020-02-05 12:48:51 +11:00
Andrew Tridgell e0cd790505 HAL_ChibiOS: fixed spektrum RC input on Pixracer
RCININT is inverted compared to RCIN, so need to enable SBUS_INV pin
2020-02-05 10:45:36 +11:00
giacomo892 529f067914 HAL_ChibiOS: save more flash on SuccexF4 2020-02-02 06:02:59 +11:00
giacomo892 23a42b1914 HAL_ChibiOS: disable parachute and sprayer on SuccexF4 2020-02-02 06:02:59 +11:00
Andrew Tridgell 8b2629bfc1 HAL_ChibiOS: save 7k flash for boards close to flash limit 2020-02-01 06:58:43 +11:00
Andrew Tridgell a7b6887f44 HAL_ChibiOS: added a f303-Universal build target 2020-01-26 09:12:55 +11:00
Andrew Tridgell 7a812a5516 HAL_ChibiOS: use cortex m7 instructions on F7/H7 2020-01-25 08:50:09 +11:00
Peter Barker 73c32f403b AP_HAL_ChibiOS: do not compile EKF2 for MatekF405-Wing 2020-01-21 11:53:18 +11:00
Andrew Tridgell 982cff0695 AP_HAL_ChibiOS: make all semaphores recursive
the cost is very similar and this prevents an easy coding error which
can occur on less used code paths
2020-01-19 20:19:30 +11:00
Andrew Tridgell 7ce771734c HAL_ChibiOS: fixed fw build size for several boards 2020-01-19 07:24:57 +11:00
Andrew Tridgell 320a703afc HAL_ChibiOS: fixed UART DMA config for ALT() pins 2020-01-19 07:24:57 +11:00
Andrew Tridgell 0cc6d4a70b HAL_ChibiOS: added support for FrSky R9 flight controller 2020-01-18 17:00:44 +11:00
Andrew Tridgell f7a65afa67 HAL_ChibiOS: allow for baro with no arguments 2020-01-18 17:00:44 +11:00
Andrew Tridgell 83d3488eb2 HAL_ChibiOS: fixed ZubaxGNSS board ID 2020-01-18 15:44:51 +11:00
Michel Pastor 6fa09c05c2 HAL_ChibiOS: added SuccexF4 board 2020-01-18 14:54:29 +11:00