Commit Graph

1398 Commits

Author SHA1 Message Date
Andrew Tridgell 793b867706 HAL_ChibiOS: switched to new USB VID for dual-CDC boards 2020-01-06 09:55:26 +11:00
Andrew Tridgell bb5c1d07e1 HAL_ChibiOS: implement new UART option bits 2020-01-03 17:32:23 +11:00
Andrew Tridgell ab0f1a8887 HAL_ChibiOS: added max uarts check 2020-01-03 17:32:23 +11:00
Andrew Tridgell 0d31e614ed HAL_ChibiOS: added ALT(1) configs for more boards
this allows more boards to use the FPort protocol
2020-01-03 17:32:23 +11:00
Andrew Tridgell 61f8e6f0d1 HAL_ChibiOS: added alt config for USART6 on MatekF765-Wing 2020-01-02 12:13:55 +11:00
Andrew Tridgell 296a4cb086 HAL_ChibiOS: re-format and fix chibios_hwdef.py for flake8 2020-01-02 09:52:57 +11:00
Andrew Tridgell 9c2b5a05bd HAL_ChibiOS: fixed python3 error 2020-01-02 09:52:57 +11:00
Andrew Tridgell c5df48faa7 HAL_ChibiOS: break out make_line() for PAL_LINE defines 2020-01-02 09:52:57 +11:00
Andrew Tridgell 66dd5925cf HAL_ChibiOS: added support for alternative pin configs 2020-01-02 09:52:57 +11:00
Andrew Tridgell 06a9baeb9b HAL_ChibiOS: adjust fmuv3 SPI priority
fixes an issue with SPI4 assignment
2020-01-02 09:52:57 +11:00
Andrew Tridgell a30e637484 HAL_ChibiOS: fixed bug in UART pin assignment
this fixes an issue with the setting of pullup/pulldown on UARTs. It
also adds enforcement of DMA assignment for DMA required peripherals
2020-01-02 09:52:57 +11:00
Andrew Tridgell 8ffd1050eb HAL_ChibiOS: fixed build on STM32F3 2020-01-02 09:52:57 +11:00
Andrew Tridgell b1ca7380be HAL_ChibiOS: re-implement half-duplex using HDSEL switching
this makes half-duplex more reliable on UARTs with pullups or level
shifters
2020-01-02 09:52:57 +11:00
Andrew Tridgell faf34970e1 HAL_ChibiOS: automatically control pullup/pulldown on inverted UARTs
this makes setup of sport telemetry much easier
2020-01-02 09:52:57 +11:00
Andrew Tridgell 58e915155d HAL_ChibiOS: fixed panic to output error every 500ms 2020-01-02 09:52:57 +11:00
Andrew Tridgell 8fdbb88827 HAL_ChibiOS: implement erase() method on Storage in HAL_ChibiOS 2020-01-02 09:52:57 +11:00
Andrew Tridgell e9dded98ce HAL_ChibiOS: enable UART6 for use as RC input on MatekF765-Wing 2020-01-02 09:52:57 +11:00
Andrew Tridgell 6447cc2519 HAL_ChibiOS: support receiver RSSI 2020-01-02 09:52:57 +11:00
Andrew Tridgell f68b9bafd8 HAL_ChibiOS: fixed H7 I2C timing
we were running the clock at too low speed. This affected the SSD1306 display
2019-12-30 16:10:44 +11:00
Andy Piper 6f979d5f7f AP_HAL_ChibiOS: define OSD_ENABLED as 1 rather than ENABLED 2019-12-30 13:02:04 +11:00
CUAVcaijie ccd54409f3 HAL_ChibiOS: Adding SPI devices for CUAV_GPS 2019-12-26 15:51:44 +11:00
CUAVcaijie 2df2e5c275 HAL_ChibiOS: Fix DMA of SPI1 TX on STM32F412 2019-12-26 15:50:18 +11:00
Andrew Tridgell 4b4642dd4d HAL_ChibiOS: allow handling of much higher receiver baudrates with DMA
this uses two DMA RX bouncebuffers to minimise the time with DMA
disabled so that we can handle much higher baudrates
2019-12-26 10:42:48 +11:00
Andrew Tridgell 58292821b3 HAL_ChibiOS: fix DMA on UARTs for F303 2019-12-26 10:42:48 +11:00
Andrew Tridgell 652d137594 HAL_ChibiOS: fixed DMA channels for f3 USART2 2019-12-26 10:42:48 +11:00
Andrew Tridgell 6eb86c6cdb HAL_ChibiOS: removed PB1 and PB0 TIM1 complementary channels for F76x
these do not work, possibly a datasheet bug
2019-12-23 21:46:57 +11:00
Andrew Tridgell c8c6c80aef HAL_ChibiOS: switch MatekF765 to timer 12
fixes PWM 5 and 6
2019-12-23 21:46:57 +11:00
Andrew Tridgell ccd1ce406c HAL_ChibiOS: scale uart rx buffer size with baudrate
this ensures we have enough buffer space for a RTK GPS, as well as for
high speed comms with a companion computer
2019-12-23 09:54:36 +11:00
Andrew Tridgell 1248519b11 HAL_ChibiOS: account for empty uarts in uart count
this fixes uart count on MatekF405-Wing
2019-12-22 08:27:17 +11:00
Andrew Tridgell 6f6fbb5b48 HAL_ChibiOS: make pwm pin pulldown 2019-12-20 16:50:48 +11:00
Andrew Tridgell f732a482fe HAL_ChibiOS: support wider range of clock frequencies 2019-12-20 16:50:48 +11:00
Andrew Tridgell a9946b41e9 HAL_ChibiOS: added f103-Trigger board 2019-12-20 16:50:48 +11:00
Andrew Tridgell a87e3e41f0 HAL_ChibiOS: make Pixhawk4 GPS2 connection clearer 2019-12-20 12:34:26 +11:00
Andrew Tridgell d422825715 HAL_ChibiOS: removed per-board AP_FEATURE_RTSCTS and AP_FEATURE_SBUS_OUT
not needed any more
2019-12-18 17:18:44 +11:00
Andrew Tridgell fc867b1596 HAL_ChibiOS: automatically set AP_FEATURE_SBUS_OUT 2019-12-18 17:18:44 +11:00
Andrew Tridgell b3459c024c HAL_ChibiOS: automatically set AP_FEATURE_RTSCTS 2019-12-18 17:18:44 +11:00
Andrew Tridgell b99d6e075c HAL_ChibiOS: change CUAVv5Nano volt scale to 18.000 2019-12-18 15:50:34 +11:00
Andrew Tridgell f17178ace0 HAL_ChibiOS: fixed build of SPI clock test 2019-12-13 09:30:48 +11:00
Andrew Tridgell 95b527dac8 HAL_ChibiOS: save 3k of flash on MatekF405-Wing
disable SMBUS and fuel battery monitors
2019-12-09 21:35:00 +11:00
Andrew Tridgell 4f429e6c5a HAL_ChibiOS: fixed handling of 16bit timer wrap
this fixes #12948
2019-12-09 12:43:39 +11:00
Andrew Tridgell d4d44990e1 HAL_ChibiOS: added assert for systime_t size 2019-12-09 12:43:39 +11:00
Henry Wurzburg ccc7968f91 HWDEF: Speedybeef4 change I2C internal mask to 0 to allow probing ext baros 2019-12-09 12:03:33 +11:00
Andy Piper 16d2dd4e2d AP_HAL_ChibiOS: specify Durdanal IMUs so that ordering is correct 2019-12-08 17:23:20 +11:00
Andrew Tridgell 0a81c48d9c HAL_ChibiOS: lower gains on CubyOrange and Yellow heater
this should reduce the chance of baro oscillation due to rapid change
in heater temperature
2019-11-28 21:35:29 +11:00
Phillip Kocmoud 73c56220ff HAL_ChibiOS: update mRoControlZeroF7 I2C mask 2019-11-27 16:08:19 +11:00
Andrew Tridgell 0317b66139 HAL_ChibiOS: update mRoX21-777 I2C mask
all external
2019-11-27 14:25:18 +11:00
Andrew Tridgell 0c4a4ccb74 HAL_ChibiOS: optionally print information on a HardFault 2019-11-27 14:12:04 +11:00
Andrew Tridgell ef993f380f HAL_ChibiOS: use system_halt_hook() 2019-11-27 14:12:04 +11:00
Andrew Tridgell c1575654e2 HAL_ChibiOS: added optional debug code for hardfaults and panics
this implements a soft-serial print function that can be used to get
debug out on a GPIO pin in a panic
2019-11-27 14:12:04 +11:00
Michael du Breuil 21f6695acd AP_HAL_ChibiOS: Add defaults.parm for CubeOrange and CubeYellow 2019-11-20 20:52:36 +11:00
Stephen Dade e1e7c6ea8a AP_HAL: Ensure scheduler does not log if there is no logger 2019-11-20 11:46:34 +11:00
Andrew Tridgell 4636a4c458 HAL_ChibiOS: support LEDs with a wider range of frequencies
this fixed LEDs on FMUv5 boards on first 4 aux channels. We need to
round up not round down in the resulting bitrate
2019-11-18 15:54:36 -08:00
Andrew Tridgell 4745c9f78d HAL_ChibiOS: setup define for number of serial ports 2019-11-19 07:13:20 +08:00
Andrew Tridgell 0751756e91 HAL_ChibiOS: retain OPENDRAIN if set on a pin
this allows OPENDRAIN when set on a pin to be retained when set with a
pinMode(). This fixes a partially lit B/E LED on the Pixhawk4
2019-11-17 11:45:38 +11:00
Andrew Tridgell fdd2e93f7e HAL_ChibiOS: disable debug port on f103 to save memory 2019-11-09 17:11:32 +11:00
Andrew Tridgell a90a2e20dc HAL_ChibiOS: enable CAN callbacks
this allows for much more reliable CAN comms in AP_Periph
2019-11-09 17:11:32 +11:00
Matt Lawrence 7a63bda027 Frame_params: Updated solo params for Copter 4 2019-11-08 07:28:17 +08:00
Andrew Tridgell 1db4afb844 HAL_ChibiOS: enable MatekF765 LED pin
- use tonealarm for buzzer
 - add more baro options
2019-11-04 08:14:27 +11:00
Andrew Tridgell 64aae4f67e HAL_ChibiOS: removed heater control 2019-11-02 16:31:04 +11:00
Andrew Tridgell d8445928d1 HAL_ChibiOS: fixed SPI timeout bug
thanks to CUAV for noticing
2019-11-01 22:11:17 +11:00
Andrew Tridgell 6c0c09e690 Revert "HAL_ChibiOS: lower speed of mpu9250"
This reverts commit a4e51f3942.

This commit led to more errors on the first IMU on a normal
CubeBlack. I don't yet know why this happens, but I'm removing this in
master for now as it affects primary IMU
2019-11-01 11:20:32 +11:00
Andrew Tridgell 22f0e8a065 HAL_ChibiOS: added RM3100 in f303-GPS 2019-11-01 10:53:53 +11:00
Andrew Tridgell 207dffba88 HAL_ChibiOS: moved compass support for f103-GPS
not needed for other builds
2019-11-01 10:53:53 +11:00
Andrew Tridgell 1d44718016 HAL_ChibiOS: added f303-periph and f303-GPS firmware 2019-11-01 10:53:53 +11:00
Andrew Tridgell bc1de7a208 HAL_ChibiOS: support STM32F3xx MCUs 2019-11-01 10:53:53 +11:00
Siddharth Purohit 8c413d3c09 HAL_ChibiOS: fix writing into a NULL pointer CANFD interrupt 2019-10-30 22:15:04 +11:00
Andrew Tridgell 8f14ea9e80 HAL_ChibiOS: enable advanced timers if we have any N PWM channels 2019-10-29 13:09:14 +11:00
Andrew Tridgell ff30ba87bc HAL_ChibiOS: fixed build of sparky2
running out of flash
2019-10-29 12:15:12 +11:00
Andrew Tridgell fcf9356e2c HAL_ChibiOS: fixed build of f103 rangefinder 2019-10-29 08:07:29 +11:00
Andrew Tridgell a4e51f3942 HAL_ChibiOS: lower speed of mpu9250
it isn't handling the full speed well, getting some SPI transfer
errors
2019-10-28 21:06:41 +11:00
Andrew Tridgell b5af1edf0d HAL_ChibiOS: moved app_descriptor to start of flash
this prevents the bootloader from finding it's own image as a false
posititve in searching for the app_descriptor
2019-10-28 15:53:16 +11:00
Andrew Tridgell 3800d7c084 HAL_ChibiOS: added crazyflie2 bootloader 2019-10-28 09:27:31 +11:00
Andrew Tridgell d1bc0f236d HAL_ChibiOS: added pragma once for watchdog header 2019-10-26 15:32:10 +11:00
Andrew Tridgell fc8d9e8af5 HAL_ChibiOS: added RTC_BOOT_FWOK value for RTC reboot register
this is used in CAN firmware to know if the main app firmware has run
for long enough to be considered good
2019-10-26 15:32:10 +11:00
Andrew Tridgell 378d5c7a5a HAL_ChibiOS: added expected delay in bootloader flash 2019-10-25 21:36:55 +11:00
Andrew Tridgell 81325ab14d HAL_ChibiOS: fixed multi-page bootloader update
and use new enum
2019-10-25 21:36:55 +11:00
Andrew Tridgell 6f9fda5094 HAL_ChibiOS: removed CAN_APP_VERSION_MAJOR from hwdef.dat 2019-10-25 13:52:43 +11:00
Andrew Tridgell 1bf037297d HAL_ChibiOS: set correct APJ_BOARD_ID for ZubaxGNSS 2019-10-25 09:35:27 +11:00
Andrew Tridgell 49e669aa1f HAL_ChibiOS: support uncompressed bootloader on f103-periph
this allows update with very low memory
2019-10-24 22:03:43 +11:00
Andrew Tridgell cffb434de8 HAL_ChibiOS: tweak stack on f103-periph 2019-10-24 22:03:43 +11:00
Andrew Tridgell a3b61a1b02 HAL_ChibiOS: enable ROMFS for ZubaxGNSS and f103-periph
this allows for bootloader update
2019-10-24 22:03:43 +11:00
Andrew Tridgell a224342b18 HAL_ChibiOS: enable ROMFS for CUAV_GPS 2019-10-24 22:03:43 +11:00
Andrew Tridgell f69be70772 HAL_ChibiOS: save some memory in f103-periph build 2019-10-22 17:51:24 +11:00
Andrew Tridgell 0a4576728e HAL_ChibiOS: support a app->bootloader comms region in SRAM
this allows for UAVCAN update without a 2nd BeginFirmwareUpdate call
2019-10-21 19:12:01 +11:00
Andrew Tridgell 5605ad6c59 HAL_ChibiOS: enable MissionPlanner compatible app descriptor 2019-10-21 19:12:01 +11:00
Andrew Tridgell 6b841e781c HAL_ChibiOS: pat watchdog immediately in expect_delay_ms()
this fixes a watchdog issue on AP_Periph if we don't have a timer
thread
2019-10-21 19:12:01 +11:00
Andrew Tridgell 7973a25c40 HAL_ChibiOS: fixed stack on ZubaxGNSS 2019-10-21 19:12:01 +11:00
Andrew Tridgell 910129eafc HAL_ChibiOS: enable watchdog in AP_Periph firmwares 2019-10-21 19:12:01 +11:00
Andrew Tridgell 5efaea2d92 HAL_ChibiOS: fixed flash storage in ZubaxGNSS 2019-10-21 19:12:01 +11:00
Andrew Tridgell e376884377 HAL_ChibiOS: fixed Zubax bootloader debug 2019-10-21 19:12:01 +11:00
Andrew Tridgell 1f06aa069e HAL_ChibiOS: fixed uprintf() in bootloader 2019-10-21 19:12:01 +11:00
Andrew Tridgell e6cb35090c HAL_ChibiOS: fixed page size for STM31F105 flash 2019-10-21 19:12:01 +11:00
Andrew Tridgell 0ef2a60682 HAL_ChibiOS: support ZubaxGNSS as a AP_Periph target 2019-10-21 19:12:01 +11:00
Andrew Tridgell 44f895ab16 HAL_ChibiOS: fixed for ZubaxGNSS build 2019-10-21 19:12:01 +11:00
Andrew Tridgell 8c796ecd2c HAL_ChibiOS: support f103-RangeFinder 2019-10-21 19:12:01 +11:00
Andrew Tridgell 3cd7dd9f12 HAL_ChibiOS: disable GPS and MAG in base f103 build
enable in f103-GPS
2019-10-21 19:12:01 +11:00
Andrew Tridgell 3ca478747c HAL_ChibiOS: enable airspeed in f103-ADSB 2019-10-21 19:12:01 +11:00
Andrew Tridgell fa6b6140e3 HAL_ChibiOS: split out f103-GPS from base f103-periph
this makes it easier to create more peripheral variants
2019-10-21 19:12:01 +11:00
Mirko Denecke b84dcd483d AP_HAL_ChibiOS: remove unnecessary tabs and whitespaces 2019-10-21 08:01:56 +11:00
Andrew Tridgell e90bd27435 HAL_ChibiOS: fixed I2C on F103
we need to use open-drain, and the sign of the constant matters
2019-10-20 20:31:02 +11:00
Andrew Tridgell 6f11926dbd HAL_ChibiOS: enable NCP5623 LED in f103-GPS 2019-10-20 20:31:02 +11:00
Siddharth Purohit 2b410479af HAL_ChibiOS: remove unused code 2019-10-19 09:55:38 +11:00
Andrew Tridgell b9885034b1 HAL_ChibiOS: added a f103-ADSB firmware
for presenting a ping ADSB device as UAVCAN
2019-10-16 13:13:24 +11:00
Andrew Tridgell 85271a8747 HAL_ChibiOS: split out f103-GPS from base f103-periph
this makes it easier to create more peripheral variants
2019-10-16 13:13:24 +11:00
Andrew Tridgell b7ae12a9d3 HAL_ChibiOS: reduce max compasses to 1 on AP_Periph 2019-10-16 08:58:52 +11:00
Andrew Tridgell 97dc76732c HAL_ChibiOS: drop mRoControlZeroF7 DPS310 clock to 5MHz 2019-10-15 10:22:15 +11:00
Henry Wurzburg c515f4b317 AP_HAL_ChibiOS/hwdef: update KakuteF4 readme 2019-10-14 10:04:30 +11:00
Andy Piper 28b866cc8f AP_HAL_ChibiOS: hardware definitions for Kakute F7 Mini 2019-10-12 21:53:55 +11:00
Andrew Tridgell 77bf67e15f HAL_ChibiOS: fixed padding of neopixel bits
lack of padding at start caused occasional glitches in colors
displayed
2019-10-10 10:41:19 +11:00
Andrew Tridgell 15e4641e51 AP_HAL_ChibiOS: cleanup ifdefs for SLCAN enable 2019-10-08 10:02:14 +11:00
Andrew Tridgell 555f56a8af HAL_ChibiOS: removed wait on CAN peripheral in H7
these wait busy loops can take a very long time, and end up causing
interrupts to be lost elsewhere in the system, causing lost bytes on
UARTs

We should not have while loops waiting on peripharals like this. If we
do need to wait for a flag to clear then it needs to be done in a low
priority thread, or we need to check for completion in a timer

CAN still seems to work with this change, but needs flight testing
2019-10-03 15:26:47 +10:00
Andrew Tridgell 47f2f1764d HAL_ChibiOS: generate HAL_MEMORY_TOTAL_KB for each board 2019-10-01 09:29:55 +10:00
Andrew Tridgell e3a965272c HAL_ChibiOS: added Pixhawk1-1M
this is for 1M versions of the Pixhawk1. It is smaller than fmuv2 as
it only links the specific sensors needed for Pixhawk1
2019-10-01 09:08:25 +10:00
Mark Whitehorn d8a07b6c44 HAL_ChibiOS: fix FMU fast_channel_mask
fix IO fast channel mask
use IOMCU chmask to only set right channels
remove unused variable
2019-10-01 07:13:33 +10:00
Andrew Tridgell 748cf39116 HAL_ChibiOS: disable DMA for RCIN on Pixracer
this frees up DMA for USART1_RX, which gives DMA for input over the
SERIAL5 WiFi port, which is important for applications where a
pixracer is being fed vision data over WiFi
2019-09-30 07:58:40 +10:00
Andrew Tridgell e820219202 HAL_ChibiOS: changed optimisation of higher end boards to -O2
-O3 does not seem to be a win, and takes up a lot more flash
2019-09-28 08:57:26 +10:00
Peter Barker 9fb715692e AP_HAL_ChibiOS: correct include of mavlink header for analog debug 2019-09-25 12:22:27 +10:00
Andrew Tridgell 386e7dc3e8 HAL_ChibiOS: fixed delay for OneShot125 channels
we were delaying output for OneShot125 by 8x as much as we need to,
which reduced our max loop rate
2019-09-22 19:43:35 +10:00
Andrew Tridgell 850892c3d9 HAL_ChibiOS: fixes from LGTM errors 2019-09-22 18:35:15 +10:00
Michael du Breuil 95bca05322 AP_HAL_ChibiOS: Only include MAVLink when using the MAVLink debugging 2019-09-19 10:48:25 +09:00
Andrew Tridgell 3c058851b2 HAL_ChibiOS: fixed undef for define lines
this fixes IMU heater enable for CubeBlack+
2019-09-16 12:53:44 +10:00
Andrew Tridgell 255e769171 HAL_ChibiOS: fixed IMU order and board ID for CubeBlack+ 2019-09-16 12:53:44 +10:00
bugobliterator e82da992c9 HAL_ChibiOS: hwdef: add hwdef for CubeBlack+ 2019-09-16 12:53:44 +10:00
Andrew Tridgell 28cca004f2 HAL_ChibiOS: added default params for skyviper-journey 2019-09-12 14:02:36 +10:00
Andrew Tridgell 1dca0a16f5 HAL_ChibiOS: rename skyviper-f412 to skyviper-journey 2019-09-12 14:02:36 +10:00
Andrew Tridgell b33afde884 HAL_ChibiOS: allow safety button on CUAV_GPS to be used for "stay in bootloader"
allows for recovery of bad CAN firmware
2019-09-10 16:22:33 +10:00
Andrew Tridgell c6a9f067e2 HAL_ChibiOS: enable LEDs on CUAV_GPS 2019-09-10 16:22:33 +10:00
Andrew Tridgell 3dfe15443d HAL_ChibiOS: fixed orientation of CUAV_GPS compass 2019-09-10 16:22:33 +10:00
Andrew Tridgell 03c1a8bfd9 HAL_ChibiOS: use safety button logic from AP_BoardConfig 2019-09-10 16:22:33 +10:00
Andrew Tridgell 0ea67943b9 HAL_ChibiOS: enable safety button on CUAV_GPS 2019-09-10 16:22:33 +10:00
Andrew Tridgell 186eedf838 HAL_ChibiOS: enable safety LED 2019-09-10 16:22:33 +10:00
Andrew Tridgell 75696997cc HAL_ChibiOS: added buzzer support to CUAV_GPS 2019-09-10 16:22:33 +10:00
Andrew Tridgell cbe0af2463 HAL_ChibiOS: setup for LEDs on KakuteF4
this makes Kopis1 display LEDs properly
2019-09-10 13:03:28 +10:00
Andrew Tridgell f441223b55 HAL_ChibiOS: implement updated NeoPixel API
allow for N leds per chain, and setting separate colours per led in
each chain
2019-09-10 13:03:28 +10:00
Tom Pittenger e3416b66dc AP_HAL_ChibiOS: add Neopixel output type, similar to dshot 2019-09-10 13:03:28 +10:00
Andrew Tridgell 91e8752c17 HAL_ChibiOS: wrap more libc functions
this saves a few k of flash as it avoids linking libc versions of some
functions
2019-09-09 13:31:30 +10:00
Andrew Tridgell 3166f84954 HAL_ChibiOS: added vsnprintf wrapper
this allows us to use a common snprintf implementation
2019-09-09 13:31:30 +10:00
Andrew Tridgell 83872c23e5 HAL_ChibiOS: fixed AP_Periph build 2019-09-06 08:51:45 +10:00
Andrew Tridgell fd80220d3e HAL_ChibiOS: setup PH4-mini RCIN port by default 2019-09-06 08:51:45 +10:00
Andrew Tridgell 54649a0e4f HAL_ChibiOS: fixed KakuteF4 define for SERIAL2 2019-09-06 08:51:45 +10:00
Andrew Tridgell 06b272705e HAL_ChibiOS: run RCIN thread at 1kHz
this gives fast enough response for SBUS parsing on a UART
2019-09-06 08:51:45 +10:00
Andrew Tridgell c841b39ea2 HAL_ChibiOS: switch to AP::RC() for AP_RCProtocol 2019-09-06 08:51:45 +10:00
Andrew Tridgell bf2cf7834d HAL_ChibiOS: fixed a bug in parity/stop-bit setting on STM32F7 and H7
and add get_options() method
2019-09-06 08:51:45 +10:00
Andrew Tridgell ad2890dc5a HAL_ChibiOS: added connector pinouts for PH4-mini 2019-09-06 08:51:45 +10:00
Andrew Tridgell b344946300 HAL_ChibiOS: prevent duplicate sensors in hwdef.dat
throw an error on configure if there is a duplicate
2019-09-05 06:37:35 +10:00
Andrew Tridgell 2c5c8106a5 HAL_ChibiOS: removed duplicate barometer from fmuv5 2019-09-04 21:24:01 +10:00
Andrew Tridgell 708ee47c03 HAL_ChibiOS: fixed f103 rm3100 2019-09-04 16:27:47 +10:00
Andrew Tridgell c2c8702329 HAL_ChibiOS: convert remaining boards to use COMPASS specifier 2019-09-04 16:27:47 +10:00
Andrew Tridgell 3aa01448ff HAL_ChibiOS: use COMPASS specifier for f103-periph 2019-09-04 16:27:47 +10:00
Andrew Tridgell 316e7cf7e6 HAL_ChibiOS: fixed mini-pix compass and baro probing
removed dup baro and fixed compass probe
2019-09-04 16:27:47 +10:00
Andrew Tridgell beca17c638 HAL_ChibiOS: use GET_I2C_DEVICE() for i2c probing
this allows for the driver probing to use a macro to prevent loading
of duplicate i2c devices (AP_Compass does this)
2019-09-04 16:27:47 +10:00
Michael du Breuil e19f0ef238 AP_HAL_ChibiOS: Remove set_stop_pin from AnalogSource 2019-09-04 09:54:50 +10:00
E Thomas c09d6908ed Enabled active buzzer output on OmnibusNanoV6 2019-09-03 09:59:53 +10:00
Andrew Tridgell 72494788f7 HAL_ChibiOS: convert more boards to use BARO specifier 2019-08-28 06:54:11 +10:00
Andrew Tridgell 0667747506 HAL_ChibiOS: convert some more boards to new IMU specifiers 2019-08-28 06:54:11 +10:00
Andrew Tridgell 5ce4ff916e HAL_ChibiOS: fixed Pixhawk1 gyro orientation
this was broken by the recent switch to hwdef.dat for orientations
2019-08-27 19:29:37 +10:00
Andrew Tridgell 0ffe2e75be HAL_ChibiOS: fixed warnings 2019-08-27 15:40:43 +10:00
Andrew Tridgell 9d760a2956 HAL_ChibiOS: disable re-entrancy in FATFS
not needed now we have a semaphore in AP_Filesystem
2019-08-27 15:40:43 +10:00
Andrew Tridgell bf79b65e07 HAL_ChibiOS: simplify stubs code 2019-08-27 15:40:43 +10:00
Andrew Tridgell d1565a96c5 HAL_ChibiOS: wrap cacheBuffer functions
needed to avoid problem with end() method in UARTDriver shadowing with
F7 implementation of cache macros
2019-08-27 15:40:43 +10:00
Andrew Tridgell b867ef35c0 HAL_ChibiOS: use AP_Filesystem API 2019-08-27 15:40:43 +10:00
Andrew Tridgell b30f3697d2 HAL_ChibiOS: fixed build without ISR limit 2019-08-27 10:29:56 +10:00
Andrew Tridgell 97c56c068e HAL_ChibiOS: update board IDs for AP_Periph firmwares 2019-08-27 10:29:56 +10:00
Andrew Tridgell 63f39c2bd6 HAL_ChibiOS: fixed build of iomcu firmware 2019-08-27 10:29:56 +10:00
Andrew Tridgell 64921b64f5 HAL_ChibiOS: enable sensors in peripheral firmwares 2019-08-27 10:29:56 +10:00
Andrew Tridgell fa76d1fbe6 HAL_ChibiOS: disable watchdog save in bootloader 2019-08-27 10:29:56 +10:00
Andrew Tridgell 5cbe85ee19 HAL_ChibiOS: allow for ADC and clock overrides 2019-08-27 10:29:56 +10:00
Andrew Tridgell dc89d10ccf HAL_ChibiOS: added hwdef.dat for CUAV_GPS 2019-08-27 10:29:56 +10:00
Andrew Tridgell c8806acaf5 HAL_ChibiOS: use AP_PERIPH env var 2019-08-27 10:29:56 +10:00
Andrew Tridgell cbc83d68cd HAL_ChibiOS: allow for CAN enable override on F4 2019-08-27 10:29:56 +10:00
Andrew Tridgell fb68fa8bc9 HAL_ChibiOS: fixed typo for 512k F4 parts 2019-08-27 10:29:56 +10:00
Andrew Tridgell e51a1a88df HAL_ChibiOS: initial hwdef-bl.dat for CUAV CAN GPS 2019-08-27 10:29:56 +10:00
Andrew Tridgell 66ab585a24 HAL_ChibiOS: setup defaults for CAN app versions 2019-08-27 10:29:56 +10:00
Andrew Tridgell d711bed405 HAL_ChibiOS: set default node ID of 117
this allows for flight controllers without DNA support
2019-08-27 10:29:56 +10:00
Andrew Tridgell ababe1e81d HAL_ChibiOS: disable UART support in f103-periph bootloader 2019-08-27 10:29:56 +10:00
Andrew Tridgell 2facfe0baa HAL_ChibiOS: support empty UART_ORDER
for CAN bootloader without uart support
2019-08-27 10:29:56 +10:00
Andrew Tridgell 9a7b52fd15 HAL_ChibiOS: added hwdef.dat for f103-periph 2019-08-27 10:29:56 +10:00
Andrew Tridgell 16bdaaa1af HAL_ChibiOS: added support for STM31F10x for AP_Periph 2019-08-27 10:29:56 +10:00
Stone white ec911710c9 hwdef: Enable Spektrum 3.3V VDD Power on fmuv5 2019-08-26 17:27:02 +10:00
Michael du Breuil 56e35e0712 AP_HAL_ChibiOS: Remove almost redundant code duplication from the HAL 2019-08-26 17:24:09 +10:00
Andrew Tridgell ffe0f338d3 HAL_ChibiOS: enable utime() API 2019-08-26 15:41:44 +10:00
Henry Wurzburg 00c111651a ChiBios: Omnibusf4pro hwdef tweak to allow active or passive buzzer 2019-08-26 12:22:53 +10:00
Andrew Tridgell aeb58cede1 HAL_ChibiOS: I2C timeout should be send+recv, not MAX(send,recv)
MAX() is right for SPI, not I2C
2019-08-26 09:13:39 +10:00
Andrew Tridgell 578e5dfdaa HAL_ChibiOS: add up i2c ISR count 2019-08-26 09:13:39 +10:00
Andrew Tridgell f8cfbb8062 HAL_ChibiOS: added ISR limit on I2C
this will prevent any possibility of an I2C interrupt storm. This is
designed to address the most likely cause of #11642
2019-08-25 17:12:16 +10:00
Andrew Tridgell 8080efbc6a HAL_ChibiOS: allow for blocking unbuffered uarts
this is used by AP_IOMCU to avoid a race condition where the mutex is
busy on write() causing a zero-length write and delayed output
2019-08-17 17:36:41 +10:00
Andrew Tridgell afc8a70ce4 HAL_ChibiOS: fixed a bug in wait_timeout() on UARTs
wait_timeout() could return true on a read of less bytes than are
expected.
2019-08-17 17:36:41 +10:00
Peter Barker 35c2406b17 AP_HAL_ChibiOS: add missing override keywords
This was causing CubeOrange not to build
2019-08-17 13:25:05 +10:00
Peter Barker 54b200a777 AP_HAL_ChibiOS: add missing uavcan-related override keywords 2019-08-14 16:33:29 +10:00
Andrew Tridgell 5e40921b42 HAL_ChibiOS: fixed reboot hold in bootloader
thanks to Tom for noticing this
2019-08-12 22:21:13 -07:00
Henry Wurzburg b6518b6b46 AP_HAL_ChiibOS: change omnibusf4 board type to be unique 2019-08-06 11:20:11 +10:00
Andrew Tridgell 4fca69c5e9 HAL_ChibiOS: renamed Pixhawk6 to Durandal
new name for FC from Holybro
2019-08-01 14:11:06 +10:00
Andrew Tridgell adcf9c4fa4 HAL_ChibiOS: added commented out baro on SPI5 for fmuv5
useful for SPI debugging
2019-07-29 10:09:08 +10:00
Andrew Tridgell 98f578394f HAL_ChibiOS: default OTG2 protocol to mavlink2 on most boards
For boards that haven't yet had a driver update in MissionPlanner to
cope with the 2nd OTG interface this change makes both interfaces work
as MAVLink

This also fixes an issue with connecting under a windows VM within
vmware
2019-07-26 21:58:57 +10:00
bugobliterator cba98096e9 HAL_ChibiOS: move to using hardcoded heater PWM polarity in iofirmware 2019-07-25 17:05:41 +10:00
Andrew Tridgell e57228646e HAL_ChibiOS: added unused CS pins for fmuv5
these are needed to ensure SPI works correctly if the unused pins are
later attached to a device
2019-07-19 16:58:10 +10:00
Andrew Tridgell 12dd33ac2b HAL_ChibiOS: added logging of hardware fault information in watchdog
this may help trackdown software bugs that trigger hard faults
2019-07-19 16:02:41 +10:00
Andrew Tridgell 2d5e4dcfa2 HAL_ChibiOS: fixed SemLine data in WDOG msg
semline was being overwritten in the setup() call
2019-07-15 08:08:54 +10:00
vierfuffzig bed92e8ca8 AP_HAL_ChibiOS: fix buzzer pin define on OMNIBUSF7V2 2019-07-13 17:26:43 +10:00
Andrew Tridgell 2f79639e36 HAL_ChibiOS: added support for MatekF765-Wing 2019-07-13 15:23:45 +10:00
reubenfinch cabd6aec8f AP_HAL_ChibiOS: Correct the README.md for fmuv5 boards
the IST8310 magnetometer uses I2C, not SPI
2019-07-12 10:59:48 +01:00
Andrew Tridgell 2f0a4ff1ab HAL_ChibiOS: fixed build on boards with less than max uarts 2019-07-12 17:01:21 +10:00
Andrew Tridgell 1919268801 HAL_ChibiOS: added OTG2 on all F7 and H7 boards with CAN
allows for SLCAN on 2nd port
2019-07-12 17:01:21 +10:00
Andrew Tridgell 02014776e8 HAL_ChibiOS: auto-set HAL_HAVE_DUAL_USB_CDC 2019-07-12 17:01:21 +10:00
Andrew Tridgell 0075b96f3a HAL_ChibiOS: added uartH 2019-07-12 17:01:21 +10:00
Siddharth Purohit dcf17e5bc2 HAL_ChibiOS: hwdef: add support for dual cdc on CubeYellow and CubeOrange 2019-07-12 17:01:21 +10:00
Siddharth Purohit 2f0d1336e6 HAL_ChibiOS: add support for dual usd cdc 2019-07-12 17:01:21 +10:00
anbello b65f5bf632 ChibiOS: hwdef revo-mini correct IMU rotation 2019-07-12 14:01:06 +10:00
Andrew Tridgell d2fe47d2e0 HAL_ChibiOS: dither heater pins to prevent magnetic impact 2019-07-12 12:46:27 +10:00
Andrew Tridgell b12cc57c64 HAL_ChibiOS: switched on fast sampling on IMU3 by default on hex cubes
as some people are flying with EK2_IMU_MASK=7 this reduces the risk of
aliasing on IMU3
2019-07-11 10:24:45 +10:00
Andrew Tridgell 3b0bd67afb HAL_ChibiOS: enable CAN on Pixhawk6 2019-07-08 12:19:20 +10:00
Siddharth Purohit 2f153a3577 HAL_ChibiOS: remove singleton interface from slcan_router 2019-07-08 12:18:29 +10:00
Siddharth Purohit 67c925865c HAL_ChibiOS: add support for CAN on STM32H7 boards 2019-07-08 12:18:29 +10:00
Peter Barker a61028c55d AP_HAL_ChibiOS: disable scripting if USE_FATFS=no 2019-07-08 09:55:46 +10:00
Andrew Tridgell 898150e460 HAL_ChibiOS: cope with calling delay_microseconds_boost() multiple times
needed for updated IMU wait code
2019-07-07 19:03:01 +10:00
Atxheli 7f3cb09da2 correct comment placement for second led 2019-07-04 08:36:33 +10:00
Hwurzburg a9783de61c correct include paths, uncomment alarm pin, fix conflict with rssi 2019-07-04 08:36:33 +10:00
Hwurzburg 3e3d7b8e7f Change to "include" style for new board, fix to allow LED to be used as status indicator 2019-07-04 08:36:33 +10:00
Hwurzburg 10838387c5 Split Omnibus F4 pro and non-pro into two boards to allow pro boards to have 8 pwm outputs 2019-07-04 08:36:33 +10:00
Alexey Kozin e5988f7153 AP_HAL_ChibiOS: fix voltage sensor connected to fmu adc 2019-07-02 06:42:11 +10:00
bugobliterator 7d4a758059 hwdef: fix default battery monitor pins for CubeOrange 2019-06-28 14:18:11 +10:00
Michael du Breuil a34ac14ec5 AP_HAL_ChibiOS: Make BOARD_FLASH_SIZE available at configure time 2019-06-18 00:06:32 -07:00
Peter Barker 1f4de871da AP_HAL_ChibiOS: return RC protocol being decoded 2019-06-18 11:35:38 +10:00
vierfuffzig 7780e8ed00 AP_HAL_ChibiOS: add support for AIO and OSD board types
this allows init on board variant without onboard baro
2019-06-18 10:10:22 +10:00
Andrew Tridgell 51e187342b HAL_ChibiOS: move the power control changes to be only CubeBlack
This aims to fix #11455. I have been unable to reproduce the issue,
which leaves me thinking it is either a bootloader difference or a hw
difference between pixhawk1 clones and real pixhawk1 boards
2019-06-09 16:56:14 +10:00
Siddharth Purohit a926effee5 hwdef: iomcu set pin mode to input for autodetecting heater control level 2019-06-08 14:31:01 +10:00
Lucas De Marchi e66de36016 HAL_ChibiOS: fix I2C transaction without stop condition
Start using i2cSoftStop() instead of i2cStop() so the peripheral
continues to be enabled and with non-gated clock.  This allows time for
the I2C peripheral to continue the ack or stop.
2019-06-06 09:27:47 -07:00
Andrew Tridgell 73bc277470 HAL_ChibiOS: fixed KakuteF7 build
low on flash
2019-06-06 12:19:13 +10:00
Andrew Tridgell 2acaada884 HAL_ChibiOS: fixed OMNIBUSF7V2 build
ran out of flash for plane
2019-06-06 12:19:13 +10:00
Andrew Tridgell bfdf857b34 HAL_ChibiOS: fixed airbotf4 build 2019-06-06 12:19:13 +10:00
Andrew Tridgell 614a059819 HAL_ChibiOS: convert more boards to using new sensor config system 2019-06-05 18:54:40 +10:00
Andrew Tridgell ff603a1f0b HAL_ChibiOS: convert mini-pix 2019-05-30 15:39:57 +10:00
Andrew Tridgell 4548aa162b HAL_ChibiOS: convert mindpx-v2 2019-05-30 15:39:57 +10:00
Andrew Tridgell 91aa49ba6f HAL_ChibiOS: convert matek boards 2019-05-30 15:39:57 +10:00
Andrew Tridgell fca03bef8d HAL_ChibiOS: convert F4BY 2019-05-30 15:39:57 +10:00
Andrew Tridgell 8605060dfc HAL_ChibiOS: convert F35Lightning 2019-05-30 15:39:57 +10:00
Andrew Tridgell 288d5d6fe6 HAL_ChibiOS: convert DrotekP3Pro 2019-05-30 15:39:57 +10:00
Andrew Tridgell d90b05f685 HAL_ChibiOS: convert all fmuv5 boards to sensor config system 2019-05-30 15:39:57 +10:00
Andrew Tridgell 03bb94599b HAL_ChibiOS: support I2C sensor probes by bus mask 2019-05-30 15:39:57 +10:00
Andrew Tridgell fc1ec8a465 HAL_ChibiOS: convert airbot to new config 2019-05-30 15:39:57 +10:00
Andrew Tridgell 82b171582e HAL_ChibiOS: added sensor config for cube varients 2019-05-30 15:39:57 +10:00
Andrew Tridgell c36d76c213 HAL_ChibiOS: convert Pixhawk1 to new sensor config
saves 26k of flash, making 1M boards work for longer
2019-05-30 15:39:57 +10:00
Andrew Tridgell eae852962e HAL_ChibiOS: fixed case of no IMU, BARO or COMPASS config settings 2019-05-30 15:39:57 +10:00
Andrew Tridgell 068e6ea8d2 HAL_ChibiOS: convert KakuteF4 and KakuteF7 to new sensor config 2019-05-30 15:39:57 +10:00
Andrew Tridgell 1b0bf88c8f HAL_ChibiOS: convert crazyflie2 to new config 2019-05-30 15:39:57 +10:00
Andrew Tridgell b47ab5c8a9 HAL_ChibiOS: support I2C sensor config in hwdef.dat 2019-05-30 15:39:57 +10:00
Andrew Tridgell ceb9c3b83e HAL_ChibiOS: convert mRoControlZeroF7 to new sensor config 2019-05-30 15:39:57 +10:00
Andrew Tridgell 5eb488303c HAL_ChibiOS: convert Pixracer to use new sensor config 2019-05-30 15:39:57 +10:00
Andrew Tridgell e198d552a8 HAL_ChibiOS: support IMU, COMPASS and BARO lines in hwdef.dat
this allows for main sensors to be set in hwdef.dat, making adding new
boards simpler
2019-05-30 15:39:57 +10:00
Phillip Kocmoud 734abe3d7d hwdef: Correct typo for mRo x2.1-777 USB PID
This needed to match the firmware directory which contains the compiled binaries hosted at http://firmware.ardupilot.org so that MissionPlanner can automatically download and update firmware.
2019-05-23 11:05:42 +10:00