Commit Graph

28302 Commits

Author SHA1 Message Date
Andrew Tridgell 97aee6f45e HAL_ChibiOS: fixed regex error for GPIOs 2021-11-07 07:00:35 +11:00
Peter Barker 306bd0a4ab SIM_GPS: make writing of data w/out byteloss more efficient 2021-11-06 16:56:14 +11:00
Peter Barker 13bd2379cf SITL: use SITL::SerialDevice in place of pipe for communication 2021-11-06 16:54:07 +11:00
Peter Barker 9ebd0cdeed AP_HAL_SITL: use SITL::SerialDevice in place of pipe for communication 2021-11-06 16:54:07 +11:00
Peter Barker a88464c928 SITL: send sv_info from both GPS instances
Without sv_info we don't get the correct ublox type, meaning we get the wrong lag time, meaning EKF2 gets rather more annoyed than it should when we do loops in SITL.
2021-11-05 23:18:11 +11:00
Andrew Tridgell 8a4001817b HAL_ChibiOS: added support for Pixhawk5X 2021-11-05 14:30:43 +11:00
Andrew Tridgell 5f15432e07 HAL_ChibiOS: allow for NODMA patterns
this makes it easy to disable DMA on I2C
2021-11-05 14:30:43 +11:00
Andrew Tridgell 7f2bcf927c HAL_ChibiOS: allow setting of armed pin 2021-11-05 14:30:43 +11:00
Andrew Tridgell c77dfae9a4 HAL_ChibiOS: adjust modalai for INA2xx batt mon change 2021-11-05 14:30:43 +11:00
Andrew Tridgell 75dfa6bae4 AP_BattMonitor: support other INA2xx battery monitors
added parameters for I2C bus and address. Tested on INA231 and INA226

This allows any 2M flash board to use an INA2xx battery monitor
2021-11-05 14:30:43 +11:00
Andrew Tridgell 34ba3e4782 AP_HAL: make set_soft_armed() virtual 2021-11-05 14:30:43 +11:00
Peter Barker f7d42a3f3b GCS_MAVLink: add board ID to AUTOPILOT_VERSION mavlink msg
Co-authored-by: durka
2021-11-05 14:10:46 +11:00
Peter Barker ce352410e1 AP_Vehicle: move EFI to AP_Vehicle 2021-11-05 09:22:17 +11:00
Hwurzburg 0b5123b194 AP_Motors: add Y4 Frame type to Quadcopters 2021-11-05 07:39:27 +11:00
bugobliterator 85284d1bc0 GCS_MAVLink: remove use of AP_BattMonitor if AP_Periph and Battery disabled 2021-11-05 07:38:43 +11:00
bugobliterator 418ac60373 AP_HAL_ChibiOS: disable watchdog when DISABLE_WATCHDOG is defined 2021-11-05 07:38:43 +11:00
Andrew Tridgell 01fb16b3b0 AP_AHRS: relax arming checks for inactive AHRS types
When using an EKF as ride-along we should not fail arming if it has
inconsistent yaw between its lanes. This is especially important when
using external yaw or GPS yaw with EKF3, where yaw is expected to be
bad with EKF2.

The check on DCM is based on the existance of an AHRS view. This is so
that tailsitters do not get arming failures due to the inability of
DCM to cope with being nose up
2021-11-04 17:44:29 +11:00
Michel Pastor 04a170d141 AP_SerialManager: fix ESC telem baud rate so that it is consistent with other protocols baud forcing 2021-11-03 18:09:41 -07:00
Josh Henderson ea4c3d68d6 AP_Airspeed: make MAV_SEVERITY levels higher 2021-11-03 18:06:48 -07:00
Mirko Denecke 8b46ab66bd AP_Motors: remove throttle roll adjust for single motor tailsitter 2021-11-03 12:32:31 +11:00
Buzz 854266dc78 ESP32: drop submodule and add script to get it as a clone and/or submodule
works with either a submodule setup or a 'clone' for either type of dev
2021-11-03 06:06:15 +11:00
Iampete1 b047ea5c02 AP_Scripting: stop and restart scripting via command int 2021-11-02 17:33:34 +11:00
Peter Barker 6a46ccf019 AP_Beacon: have nooploop use base-class uart instance 2021-11-02 11:19:18 +11:00
Iampete1 73fb871695 AP_BatteryMoniter: combine pointer loaded param tables 2021-11-02 11:12:57 +11:00
Iampete1 7d4f305f20 AP_BatteryMoniter: add mask param to sum battery backend. 2021-11-02 11:12:57 +11:00
Josh Henderson ed32136006 AP_Param: remove unused convert_parent_class() 2021-11-02 10:18:09 +11:00
Josh Henderson 9cae5d1120 AP_Param: add sub-group class param conversion method 2021-11-02 10:18:09 +11:00
Iampete1 a45e7608f2 GCS_MAVLink: set RC is_calibrating from command_preflight_calibration param4 2021-11-02 10:05:07 +11:00
Iampete1 c9107b2e98 RC_Channel: add gcs_is_calibrating bool 2021-11-02 10:05:07 +11:00
Iampete1 f7a788dc44 AP_Arming: add rc_in_calibration_check to manual_transmitter_checks and mandatory_checks 2021-11-02 10:05:07 +11:00
Peter Barker 1abef3275e SITL: make ToshibaLED simulator optional 2021-11-02 09:40:09 +11:00
Peter Barker 59bda177ff SITL: cope with fewer than three INS_MAX_INSTANCEs 2021-11-02 09:38:59 +11:00
Josh Henderson 38ef0fd4fa AP_Param: eedump_apparam match Param_header and sentinals to AP_Param.h 2021-11-02 06:06:16 +11:00
Peter Barker 581629b332 SITL: make Ship simulator optional 2021-11-01 21:34:04 +11:00
yaapu b97e335940 AP_CRSF_Telem: adjusted status text frame size based on actually used bytes 2021-11-01 21:32:24 +11:00
yaapu 1850851869 AP_CRSF_Telem: adjusted flight mode frame length based on actually used bytes 2021-11-01 21:32:24 +11:00
Peter Barker 0627ee66c5 AP_Compass: clarify all_configured calculations 2021-11-01 21:28:17 +11:00
Andrew Tridgell e8926f8518 AP_Logger: avoid all opens of log files in main thread
this fixes a problem with sdcards where file open is very slow. It can
trigger a watchdog if it is slow enough. Peter and I hit this issue on
a pixracer today with a new sd card
2021-11-01 20:32:38 +11:00
Buzz 3ecfdd5f88 GCS_MAVLink: esp target is not STM32, so don't do stm32 specific magic
see libraries/AP_HAL_ESP32/README.md for more.

Author: Charles Villard <charlesvillard10@gmail.com>
Author: Buzz <davidbuzz@gmail.com>
2021-11-01 17:40:31 +11:00
Buzz adaccdf0ba AP_Math: esp32 with esp_idf have MIN and MAX defined to something else.
Author: Charles Villard <charlesvillard10@gmail.com>
Author: Buzz <davidbuzz@gmail.com>
2021-11-01 17:40:31 +11:00
Buzz d4e2828540 AP_Logger: esp32 takes longer to init its SD card after boot.
see libraries/AP_HAL_ESP32/README.md for more.

Author: Charles Villard <charlesvillard10@gmail.com>
Author: Buzz <davidbuzz@gmail.com>
2021-11-01 17:40:31 +11:00
Buzz 168dc34566 AP_InertialSensor: New fallback type = NONE, which successfully does nothing like an INS, but without needing a real one, like esp32 dev boards.
Good for boards that u want to boot even when they dont have an IMU attached.
Author: Charles Villard <charlesvillard10@gmail.com>
Author: Buzz <davidbuzz@gmail.com>
2021-11-01 17:40:31 +11:00
Buzz ecfdd80bc7 AP_HAL: new HAL layer for esp32
see libraries/AP_HAL_ESP32/README.md for more.

Author: Charles Villard <charlesvillard10@gmail.com>
Author: Buzz <davidbuzz@gmail.com>
2021-11-01 17:40:31 +11:00
Buzz bb8998bdef AP_HAL_ESP32: new HAL layer for esp32
see libraries/AP_HAL_ESP32/README.md for more.

Author: Charles Villard <charlesvillard10@gmail.com>
Author: Buzz <davidbuzz@gmail.com>
2021-11-01 17:40:31 +11:00
Buzz 7c893d7cc9 AP_Filesystem: add ESP32 support
Author: Charles Villard <charlesvillard10@gmail.com>
Author: Buzz <davidbuzz@gmail.com>
2021-11-01 17:40:31 +11:00
Buzz 8d9f161b40 AP_Compass: add support for ICM20948 I2C variant and rename existing one as SPI variant
Author: Charles Villard <charlesvillard10@gmail.com>
Author: Buzz <davidbuzz@gmail.com>
2021-11-01 17:40:31 +11:00
Andrew Tridgell 98849a3998 HAL_ChibiOS: fixed build for EMPTY uarts
this fixes NucleoH743 build
2021-11-01 15:48:25 +11:00
divyateja04 2d7076fd39 AP_SerialLED: removed empty constructors 2021-11-01 10:24:40 +11:00
Andrew Tridgell 2b19b8a988 AP_Compass: switched to GSF based compass learning
this makes inflight compass learning faster, more accurate and much
simpler
2021-11-01 09:00:27 +11:00
Andrew Tridgell 282209e3e6 AP_NavEKF3: add accessor for GSF yaw estimator 2021-11-01 09:00:27 +11:00
Andrew Tridgell 0d8cf00c5a AP_NavEKF2: add accessor for GSF yaw estimator 2021-11-01 09:00:27 +11:00
Andrew Tridgell bdf903b862 AP_AHRS: add accessor for GSF yaw estimator 2021-11-01 09:00:27 +11:00
divyateja04 001f6a29ee AP_RangeFinder: removed empty constructors 2021-10-31 09:49:25 +11:00
divyateja04 2406877a60 AP_VisualOdom: removed empty constructors 2021-10-31 09:47:12 +11:00
QioTek 952a827287 HAL_ChibiOS: fixed orientation of ADI1674X and optimize SPI3 DMA
HAL_ChibiOS: fixed orientation of ADI1674X and optimize SPI3 DMA
2021-10-31 08:42:05 +11:00
bugobliterator 57e1fb1a81 HAL_ChibiOS: disable building CrashCatcher for non 2M boards 2021-10-30 19:24:57 +11:00
bugobliterator 91fdf6e875 HAL_ChibiOS: fix issue with writing the last byte 2021-10-30 19:24:57 +11:00
bugobliterator a28bf358d1 HAL_ChibiOS: skip compiling last_crash_dump if bootloader and GCS disabled 2021-10-30 19:24:57 +11:00
bugobliterator 8651d99de6 HAL_ChibiOS: move to using parameter STORAGE_FLASH_PAGE instead of define 2021-10-30 19:24:57 +11:00
bugobliterator 70f606c480 AP_HAL_ChibiOS: restrict crash dump mechanisms only on boards with 2M flash 2021-10-30 19:24:57 +11:00
bugobliterator 909f59f0e0 HAL_ChibiOS: fix build with boards without HAL_CRASH_SERIAL_PORT 2021-10-30 19:24:57 +11:00
bugobliterator a6b2018cbf HAL_ChibiOS: fix build and serial crash dump for F4 based boards 2021-10-30 19:24:57 +11:00
bugobliterator 7d199f3e51 HAL_ChibiOS: record info into watchdog as well 2021-10-30 19:24:57 +11:00
bugobliterator 13c83f7010 HAL_ChibiOS: remove build of Crash dump to flash methods when !defined(HAL_CRASH_DUMP_FLASHPAGE) 2021-10-30 19:24:57 +11:00
bugobliterator 66b8b9cf74 HAL_ChibiOS: add support for dumping crash logs to flash page 2021-10-30 19:24:57 +11:00
bugobliterator b2ffc12092 HAL_ChibiOS: define flash page for dumping crash log 2021-10-30 19:24:57 +11:00
bugobliterator 29568a23ae HAL_ChibiOS: fetch crash_dump stored in flash 2021-10-30 19:24:57 +11:00
bugobliterator f9f47cbeeb AP_HAL: add method to fetch last crash dump 2021-10-30 19:24:57 +11:00
bugobliterator 2af001541e AP_FileSystem: add crash_dump.bin 2021-10-30 19:24:57 +11:00
bugobliterator bd08d2d257 HAL_ChibiOS: move crashcatcher methods out from system.cpp into hwdef common 2021-10-30 19:24:57 +11:00
bugobliterator 7c96f295b3 HAL_ChibiOS: use CrashCatcher's hardfault method to log and dump crashes 2021-10-30 19:24:57 +11:00
bugobliterator 69f53a6188 HAL_ChibiOS: add defines for CrashCatcher methods to use 2021-10-30 19:24:57 +11:00
bugobliterator c32bd845f2 HAL_ChibiOS: build crashcatcher lib alongside chibios 2021-10-30 19:24:57 +11:00
Andrew Tridgell 8a73bdcbe6 APM_Control: suppress roll/pitch D term in ground_mode
prevent oscillations which are quite common
2021-10-30 18:45:53 +11:00
Andrew Tridgell 50f9d2601f AP_Arming: log key @SYS files on arming 2021-10-30 16:44:00 +11:00
Andrew Tridgell 0be1017843 AP_Logger: support logging of files contents
this allows us to see key internal data in log files
2021-10-30 16:44:00 +11:00
Andrew Tridgell a0b662f161 hwdef: fixed reported flash on boards with storage at end of flash
this was in hwdef-bl.dat but had been left out of hwdef.dat which led
to flash_free being wrong in apj file
2021-10-29 18:28:36 +11:00
Shiv Tyagi 1c33cfca5d AP_MSP: factor code in init method
This factors code in AP_MSP:init() and removes two of the three identical implementations for initialising backends
2021-10-28 20:37:24 +11:00
Tom Pittenger 6107dcc8e7 AP_ADSB: bugfix vertical velocity sign was backwards 2021-10-28 09:51:33 +11:00
Peter Barker 02dc42275c AP_HAL_SITL: remove unused/unimplemented methods/vars, tidy namespacing 2021-10-28 09:09:44 +11:00
divyateja04 7f0bf89003 AC_AttitudeControl: removed empty constructors 2021-10-28 09:07:56 +11:00
drtrigon 3a0ed5446a AP_Scripting: select auto or manual gimbal/camera control mode
I have a camera that has picture and video trigger on the same channel. As ArduPilot is not able to handle that currently I wrote a script that allows to switch between auto and manual gimbal and camera control modes. Switching to manual camera control allows to enable picture as well as video trigger.
2021-10-27 18:40:42 +11:00
divyateja04 24eb35f0f6 AP_WheelEncoder: quadrature spelling changed 2021-10-27 16:03:06 +11:00
Tom Pittenger 99912e9e0f AP_ADSB: UCP cleanup 2021-10-26 16:53:00 -07:00
nicholas-inocencio f4ff8859e4 AP_ADSB: I implement new mavlink packets ADSB_OUT_STATUS and ADSB_OUT_CONTROL 2021-10-26 16:53:00 -07:00
nicholas-inocencio 9ca681c76d GCS_MAVLink: integrate new ADSB Ping200X/MissionPlanner new mavlink config and status commands 2021-10-26 16:53:00 -07:00
Hwurzburg 9349abfe48 AP_Motors: add build options for each frame class 2021-10-27 07:59:52 +09:00
divyateja04 d82ad94b7e AP_WheelEncoder: remove empty constructors 2021-10-26 22:10:21 +11:00
Randy Mackay 58b2154e77 AP_Torqeedo: handle outgoing esc characters 2021-10-26 19:40:52 +09:00
Randy Mackay 096f459148 AP_Torqeedo: handle incoming escape characters 2021-10-26 19:40:52 +09:00
Andrew Tridgell b94d6b064f HAL_ChibiOS: convert some hwdef.dat to unix line endings 2021-10-26 15:56:53 +11:00
Andrew Tridgell 80836ca1d9 HAL_ChibiOS: simplify AP_Periph hwdef.dat 2021-10-26 15:56:53 +11:00
Andrew Tridgell 68146d541c HAL_ChibiOS: removed boilerplate lines from bootloaders 2021-10-26 15:56:53 +11:00
Andrew Tridgell 0378e1a879 HAL_ChibiOS: removed need for a lot of boilerplate hwdef lines
bootloader and AP_Periph lines can default to right values
2021-10-26 15:56:53 +11:00
Andrew Tridgell 7056a09ef4 SITL: rename uLanding files to USD1 2021-10-26 15:31:12 +11:00
Andrew Tridgell 55e8725231 SITL: rename uLanding simulation to USD1 2021-10-26 15:31:12 +11:00
Andrew Tridgell 8e689f2e66 AP_SerialManager: rename uLanding simulation to USD1 2021-10-26 15:31:12 +11:00
Andrew Tridgell 8192661042 AP_HAL_SITL: rename uLanding simulation to USD1 2021-10-26 15:31:12 +11:00
Andrew Tridgell 4f2bec72b6 AP_RangeFinder: rename uLanding to USD1_Serial
this was rebranded by the vendor Ainstein a long time ago
2021-10-26 15:31:12 +11:00
Andrew Tridgell c1b9585926 AP_RangeFinder: average over 100Hz frames in USD1 CAN driver
this reduces noise
2021-10-26 15:31:12 +11:00
Andrew Tridgell c56bd323ee AP_CANManager: fixed CAN protocol docs to include USD1 2021-10-26 15:31:12 +11:00
Andy Piper 32482a29db AP_Common: define build directory for tests 2021-10-26 11:42:12 +11:00
Andy Piper ad55a570ee AP_Common: define build directory for tests 2021-10-26 11:42:12 +11:00
Andy Piper 97b57519bf AP_OSD: convert APM_BUILD_COPTER_OR_HELI() to APM_BUILD_COPTER_OR_HELI 2021-10-26 11:42:12 +11:00
Andy Piper 6a00819b2d AP_InertialSensor: convert APM_BUILD_COPTER_OR_HELI() to APM_BUILD_COPTER_OR_HELI 2021-10-26 11:42:12 +11:00
Andy Piper 31c74f9793 AP_Scripting: convert APM_BUILD_COPTER_OR_HELI() to APM_BUILD_COPTER_OR_HELI 2021-10-26 11:42:12 +11:00
Andy Piper 9408c5711d AP_Camera: remove build dependant compile 2021-10-26 11:42:12 +11:00
Andy Piper 70b02aeadf AP_BattMonitor: convert APM_BUILD_COPTER_OR_HELI() to APM_BUILD_COPTER_OR_HELI 2021-10-26 11:42:12 +11:00
Andy Piper 0d9b677586 AP_Rally: convert APM_BUILD_COPTER_OR_HELI() to APM_BUILD_COPTER_OR_HELI 2021-10-26 11:42:12 +11:00
Andy Piper 63cea29af3 AP_BLHeli: convert APM_BUILD_COPTER_OR_HELI() to APM_BUILD_COPTER_OR_HELI 2021-10-26 11:42:12 +11:00
Andy Piper 62825ee44f AP_Arming: convert APM_BUILD_COPTER_OR_HELI() to APM_BUILD_COPTER_OR_HELI 2021-10-26 11:42:12 +11:00
Andy Piper f9c74f207b AP_CANManager: convert APM_BUILD_COPTER_OR_HELI() to APM_BUILD_COPTER_OR_HELI 2021-10-26 11:42:12 +11:00
Andy Piper e1dd0fd70d AP_AHRS: convert APM_BUILD_COPTER_OR_HELI() to APM_BUILD_COPTER_OR_HELI 2021-10-26 11:42:12 +11:00
Andy Piper 592241f029 AP_Scheduler: convert APM_BUILD_COPTER_OR_HELI() to APM_BUILD_COPTER_OR_HELI 2021-10-26 11:42:12 +11:00
Andy Piper a2bb0b01e8 AP_RangeFinder: convert APM_BUILD_COPTER_OR_HELI() to APM_BUILD_COPTER_OR_HELI 2021-10-26 11:42:12 +11:00
Andy Piper 71c0d9479a AP_GyroFFT: convert APM_BUILD_COPTER_OR_HELI() to APM_BUILD_COPTER_OR_HELI 2021-10-26 11:42:12 +11:00
Andy Piper 9bea417d5c SRV_Channel: convert APM_BUILD_COPTER_OR_HELI() to APM_BUILD_COPTER_OR_HELI 2021-10-26 11:42:12 +11:00
Andy Piper 50b90c2d2a StorageManager: convert APM_BUILD_COPTER_OR_HELI() to APM_BUILD_COPTER_OR_HELI 2021-10-26 11:42:12 +11:00
Andy Piper 7010a6bf7e AP_Vehicle: convert APM_BUILD_COPTER_OR_HELI() to APM_BUILD_COPTER_OR_HELI
force compilation failure if build type is unknown
2021-10-26 11:42:12 +11:00
Andy Piper 78621668f8 AP_NavEKF2: convert APM_BUILD_COPTER_OR_HELI() to APM_BUILD_COPTER_OR_HELI 2021-10-26 11:42:12 +11:00
Andy Piper bc0101e446 AP_NavEKF3: convert APM_BUILD_COPTER_OR_HELI() to APM_BUILD_COPTER_OR_HELI 2021-10-26 11:42:12 +11:00
Andy Piper 008c61215c GCS_MAVLINK: convert APM_BUILD_COPTER_OR_HELI() to APM_BUILD_COPTER_OR_HELI 2021-10-26 11:42:12 +11:00
Andy Piper f9b6934d7d AC_Avoidance: convert APM_BUILD_COPTER_OR_HELI() to APM_BUILD_COPTER_OR_HELI 2021-10-26 11:42:12 +11:00
Iampete1 f5805058c2 AP_Scripting: docs ignore duplicate-set-field warning 2021-10-26 11:05:22 +11:00
Iampete1 648a2b7140 AP_Scripting: docs: add manual bindings 2021-10-26 11:05:22 +11:00
Iampete1 da1fde06ad AP_Scripting: fix skip check userdata feild write 2021-10-26 11:05:22 +11:00
Iampete1 003561ab75 AP_Scripting: Docs: append _ud to userdata types to avoild name clash with new functions and declare local 2021-10-26 11:05:22 +11:00
Michel Pastor 876f478ae1 RCOutput: fix motor stopping with rev thrust and full throttle 2021-10-26 10:53:34 +11:00
Hwurzburg e7a157283f AP_HAL_ChibiOS: add param for second IMU primary in Swan-K1 hwdef 2021-10-26 10:38:28 +11:00
Hwurzburg 9c529c8950 RC_Channel: add RC option to plane for emergency remote landing that forces FS actions to FBWA 2021-10-26 10:34:28 +11:00
Iampete1 d7cc2cb296 AP_HAL_ChibiOS: hwdef.py: allow same GPIO pin in multiple alt configs 2021-10-26 10:05:20 +11:00
kniuk aabb6f7c59 AP_HAL_ChibiOS: add alt config GPIO to Matek F765-Wing
Based on new functionality introduced in #18753
2021-10-26 10:05:20 +11:00
Iampete1 ef9580fcf2 SITL: update tailsitter ground behavoir 2021-10-26 10:03:00 +11:00
IamPete1 950391df12 SITL: add copter tailsitter 2021-10-26 10:03:00 +11:00
Peter Barker 2dbe15911f AP_GPS: change empty constructors out for 'use AP_GPS_Backend::AP_GPS_Backend' 2021-10-23 15:05:28 +11:00
Peter Barker e158bab893 AP_Beacon: tidy constructors 2021-10-23 10:10:28 +11:00
Peter Barker cf9bbb570c AP_HAL_SITL: correct nullptr check on simulated mavlink rangefinder
Obvious copy/paste error
2021-10-22 21:46:01 +11:00
Sebastian Quilter 0276c165ed GCS_MAVLink: make rangefinder ranges m rather than cm 2021-10-21 21:28:53 +11:00
Sebastian Quilter 0f7c3e3964 AP_RangeFinder: make rangefinder ranges m rather than cm 2021-10-21 21:28:53 +11:00
Sebastian Quilter 1fb1eb793f AP_Proximity: make rangefinder ranges m rather than cm 2021-10-21 21:28:53 +11:00
Sebastian Quilter c8434fe1ed AP_OSD: make rangefinder ranges m rather than cm 2021-10-21 21:28:53 +11:00
Peter Barker 7da5d9861a SITL: remove use of fprintf in SIM_SPI 2021-10-21 13:04:33 +11:00
Peter Barker 8c60bfc1c3 SITL: correct format string in SIM_IntelligentEnergy24 2021-10-21 13:01:49 +11:00
Peter Barker 06c3290e15 SITL: correct buffer over-read in GPS lag simulation 2021-10-21 12:09:21 +11:00
Peter Barker 6c16da21c5 SITL: make simulated GPS work as a SerialDevice 2021-10-21 12:09:21 +11:00
Peter Barker 1ab8a3e3aa AP_HAL_SITL: make simulated GPS work as a SerialDevice 2021-10-21 12:09:21 +11:00
Peter Barker 99e80549b1 SITL: move sitl_gps.cpp to SIM_GPS.cpp 2021-10-21 12:09:21 +11:00
Peter Barker e88cd8498b AP_GPS: add note about GPS_LEAPSECONDS_MILLIS being copied 2021-10-21 12:09:21 +11:00
Peter Barker d7ef63deaf GCS_MAVLink: use USB VID and PID in AUTOPILOT_VERSION mavlink msg 2021-10-20 22:47:03 +11:00
Stephen Dade 1356beb14d AP_HAL_SITL: Add instance to ADSB simulation 2021-10-20 20:21:33 +11:00
Stephen Dade 016edd28fc SITL: Add instance to ADSB simulation 2021-10-20 20:21:33 +11:00
Randy Mackay 85dbb70df5 AP_RangeFinder_NMEA: add hondex custom message support 2021-10-20 19:46:21 +11:00
Peter Barker 2bffaef9ca AP_Arming: log whether disarm was forced 2021-10-20 19:45:58 +11:00
Peter Barker 8ffbddd6ec SITL: correct compilation when MAX_CONNECTED_MAGS is reduced
For example, when building AP_Periph with reduced mag count
2021-10-20 19:43:47 +11:00
Peter Barker 2d192e1fd3 SITL: remove written-only AP::sitl().update_rate_hz 2021-10-20 19:07:17 +11:00
Peter Barker 21030c4e83 AP_HAL_SITL: remove written-only AP::sitl().update_rate_hz 2021-10-20 19:07:17 +11:00
Andrew Tridgell 822e657a70 HAL_ChibiOS: increase PROCESS_STACK on several boards
use min of 0xA00 for AP_Periph. A larger stack is needed for parameter
fetching
2021-10-20 19:06:35 +11:00
Iampete1 84db897b7f AC_Avoidance: Dijkstra: convert Vector3f to curly brace init 2021-10-20 03:45:40 -04:00
Iampete1 8937802f77 AC_Avoidance: Dijkstra: don't consider points in corners 2021-10-20 03:45:40 -04:00
Iampete1 ae9300134a AC_Avoidance: add option to log vis graph 2021-10-20 03:45:40 -04:00
Iampete1 05e01fb603 AP_Scripting: docs: update GCS 2021-10-20 18:35:09 +11:00
Iampete1 05219ca5c4 GCS_Common: return true result for scripting set_message_interval 2021-10-20 18:35:09 +11:00
Iampete1 1af244e5bc AP_Scripting: maunaly update GPIO docs as example 2021-10-20 18:35:09 +11:00
Iampete1 6dd9ffc334 AP_Scripting: auto generate docs 2021-10-20 18:35:09 +11:00
Iampete1 a70134ba38 AP_Scripting: generator: ouput Emmylua docs 2021-10-20 18:35:09 +11:00
Iampete1 a5a3b413df AP_Scripting: wscript: support docs option 2021-10-20 18:35:09 +11:00
Iampete1 b595beab10 AP_Motors: set ouput scaled with float 2021-10-20 18:29:58 +11:00
Iampete1 a590a675d6 AP_RollController: return floats 2021-10-20 18:29:58 +11:00
Iampete1 da4fd7a914 AP_PitchController: return floats 2021-10-20 18:29:58 +11:00
Iampete1 6e4ae3898d AP_Winch: use floats for get/set output scaled 2021-10-20 18:29:58 +11:00
Iampete1 76ccbeb0fa AP_SpdHgtControl: use float for get_throttle_demand 2021-10-20 18:29:58 +11:00
Iampete1 d69d493ea6 AP_TECS: use float for get_throttle_demand 2021-10-20 18:29:58 +11:00
Iampete1 fbb9ef422c AP_Scripting: use floats for get/set output scaled 2021-10-20 18:29:58 +11:00
Iampete1 89c0a8ea04 AP_Airspeed: use floats for get/set output scaled 2021-10-20 18:29:58 +11:00
Iampete1 14b9e99020 RC_Channel: use float for stick mixing 2021-10-20 18:29:58 +11:00
Iampete1 b84633630a SRV_Channel: use floats for get/set output scaled 2021-10-20 18:29:58 +11:00
Andy Piper 73b0a212f7 AP_Arming: FFT prearm should not be dependent on INS prearm 2021-10-20 18:16:05 +11:00
Peter Barker cf9f060db8 AP_InertialNav: handle renaming of AP_InertialNav_NavEKF to AP_InertialNav 2021-10-20 18:09:36 +11:00
Peter Barker 300628a570 AP_InertialNav: rename files for delayering 2021-10-20 18:09:36 +11:00
Peter Barker b8d9f79969 AP_InertialNav: remove old AP_InertialNav.h for delayering 2021-10-20 18:09:36 +11:00
Shiv Tyagi 229e2757d4 RC_Channel : Formatting fix for blimp parameter documentation 2021-10-20 14:22:48 +11:00
Randy Mackay a09013c656 AP_Torqeedo: correct display system state motor power field type
No need to store as float
2021-10-19 01:30:51 -04:00
Randy Mackay 90f7e15bcb AP_Torqeedo: fixups from peer review 2021-10-19 01:30:51 -04:00
Randy Mackay 1bdfe8ad55 AP_BattMonitor: fixups from peer review 2021-10-19 01:30:51 -04:00
Randy Mackay 47dd2d7aea RC_Channel: torqeedo clear error aux function 2021-10-19 01:30:51 -04:00
Randy Mackay d3c8a5e85f AP_BattMonitor: add torqeedo battery monitor 2021-10-19 01:30:51 -04:00
Randy Mackay 866ea184c8 AP_Torqeedo: major refactor and enhancement
SLEW_TIME specifies the rate of change in output to the motor
DIR_DELAY specifies the length of the pause at zero during forward-reverse transitions
POWER param allows configurable power output
Consume Display system state and setup messages
Consume Motor messages to retrieve volt and current
TRQD logs on each motor speed update
AP_Torqeedo: request and consume motor status messages
ESC_Telemetry support
Battery info accessor
Add real-time error reporting of failures to user
Support user manually clearing motor errors via RC
Improve message reply handling
Tiller message consumption improved
Messages with unexpected lengths increment error count
Enums added
Comments improved
Remove unused include
Disable for AP_Periph and minimise features
2021-10-19 01:30:51 -04:00
Randy Mackay e61624d43b AP_Torqeedo: motor connector method output slowed to 10hz 2021-10-19 01:30:51 -04:00
Peter Barker 29088e25f9 AP_Vehicle: move SITL object up to AP_Vehicle 2021-10-19 11:34:43 +11:00
Iampete1 8459439798 AP_HAL_ChibiOS: CubeYellow: set default IMU arming temp margin 2021-10-19 11:16:45 +11:00
Iampete1 8e381b6017 AP_HAL_ChibiOS: CubeSolo: set default IMU arming temp margin 2021-10-19 11:16:45 +11:00
Iampete1 a004de65b3 AP_HAL_ChibiOS: CubePurple: set default IMU arming temp margin 2021-10-19 11:16:45 +11:00
Iampete1 e3289d2aec AP_HAL_ChibiOS: CubeBlack: set default IMU arming temp margin 2021-10-19 11:16:45 +11:00
Iampete1 5d5a21a4ec AP_Hal_ChibiOS: CubeOrange: set default min IMU temp margin 2021-10-19 11:16:45 +11:00
Iampete1 3f98927885 AP_BoardConfig: add min arming temp margin param and getter 2021-10-19 11:16:45 +11:00
Iampete1 55a6b731a8 AP_Arming: add min heater temp check 2021-10-19 11:16:45 +11:00
QioTek fd2195d6fe HAL_ChibiOS: added QioTekZealotH743 support 2021-10-19 08:17:43 +11:00
Peter Barker a39fe77681 SITL: add simulated MCP9600 2021-10-19 08:15:00 +11:00
Peter Barker 0acccaf4b7 AP_ExternalAHRS: factor substring from allocation_error parameter 2021-10-18 12:49:44 +11:00
Peter Barker d6ebc5578b AP_DAL: factor substring from allocation_error parameter 2021-10-18 12:49:44 +11:00
Peter Barker 60759f9a83 AP_CANManager: factor substring from allocation_error parameter 2021-10-18 12:49:44 +11:00
Peter Barker 5b2eced5a2 AP_BoardConfig: factor substring from allocation_error parameter 2021-10-18 12:49:44 +11:00
Andrew Tridgell b0674a2b35 AP_Compass: support 2nd address for ICM20948 compass 2021-10-18 08:29:29 +11:00
Andrew Tridgell 7aa968329c HAL_ChibiOS: added Nucleo-L476 target 2021-10-17 20:30:20 +11:00
Andrew Tridgell c8664e0b98 HAL_ChibiOS: added STM32L476 support 2021-10-17 20:30:20 +11:00
Andrew Tridgell 655c757c22 HAL_ChibiOS: added Sierra-L431 peripheral 2021-10-17 20:30:20 +11:00
Andrew Tridgell 5a68e21435 HAL_ChibiOS: support STM32L431 2021-10-17 20:30:20 +11:00
Andrew Tridgell 71e7bb0fe3 HAL_ChibiOS: mark af_parse_cubemx.py as executable, py3 2021-10-17 20:30:20 +11:00
Andrew Tridgell f1ea4f5d01 HAL_ChibiOS: use a 16 bit sysinterval_t on 16 bit timers
prevent mixed size subtraction errors
2021-10-17 20:29:42 +11:00
Peter Barker 05c6a25e52 SITL: move simulated megasquirt to SerialDevice framework 2021-10-17 10:00:08 +11:00
Peter Barker 8c9ade3f7f AP_HAL_SITL: move simulated megasquirt to SerialDevice framework 2021-10-17 10:00:08 +11:00
Davis Schenkenberger 2026f7efb8 AP_ExternalAHRS: Implement EAHRS Driver for Lord Microstrain AHRS 2021-10-17 08:55:03 +11:00
Davis Schenkenberger 3e748d77c9 Tools: autotest: add test for LORD EAHRS 2021-10-17 08:55:03 +11:00
Asa Davis 85fbbe0704 SITL: add simulator for LORD Microstrain serial EAHRS 2021-10-17 08:55:03 +11:00
Davis Schenkenberger 795e7e53bf AP_HAL: add helpers le64toh_ptr, be64toh_ptr, put_le64_ptr, put_be64_ptr 2021-10-17 08:55:03 +11:00
Sandy Urazayev 644726ff50 AP_Common: Added missing fenv exception functions from FreeBSD fenv tree
Signed-off-by: Sandy Urazayev <ctu@ku.edu>
2021-10-16 20:09:11 +11:00
Andrew Tridgell 67fd862a8c AP_RCProtocol: check for RC protocol switching enable
by default don't allow protocol switching after initial protocol is
found
2021-10-15 19:29:23 -04:00
Andrew Tridgell 6c2689fef2 RC_Channel: added RC_OPTION bit for allowing RC protocol switching
this is meant to prevent accidential switching to a disconnected pin
2021-10-15 19:29:23 -04:00
Peter Barker 670663a741 AP_NavEKF3: allow hwdef to override IMU default 2021-10-16 10:26:29 +11:00
courk b1bf22b53c GPIO_BBB: fix partially working GPIO init
use cleaner way to enable all GPIO banks, including GPIO1.
2021-10-15 15:16:17 -07:00
bugobliterator 5fa50c419d AP_HAL_ChibiOS: account for TXFIFO when doing flow control detection 2021-10-15 19:57:55 +11:00
Andy Piper d71fb2cb34 AP_Filesystem: fix ftp burst read with credit to deanharken 2021-10-15 19:02:41 +11:00
Tom Pittenger 12192f60e3 GCS_MAVLink: move ADSB mavlink handling from vehicles to common library 2021-10-14 19:55:27 -07:00
Josh Henderson 2b5e2a00e1 SITL: NMEA Depthfinder add temperature simulation 2021-10-15 13:08:17 +11:00
tajisoft f076bb3ad1 AP_Scripting: update ahrs-source-gps-optflow.lua 2021-10-14 10:36:29 +11:00
Pierre Kancir 12e1f67326 AP_Compass: only update last_update_ms on raw_field update if on calibration 2021-10-13 19:45:03 +11:00
Peter Barker 893354ccfe RC_Channel: correct spelling error in parameter description 2021-10-13 19:36:20 +11:00
李孟晓 e5efc52324 AP_BattMonitor: Add support for BatteryInfoAux message 2021-10-13 18:44:05 +11:00
李孟晓 36ceb76cae AP_UAVCAN: Add battery ID field 2021-10-13 18:44:05 +11:00
李孟晓 54b68ffae3 GCS_MAVLink: Provide the time remaining 2021-10-13 18:44:05 +11:00
李孟晓 bf1a17825c AP_BattMonitor: Provide the time remaining 2021-10-13 18:44:05 +11:00
Andrew Tridgell d1c7ed1c82 HAL_ChibiOS: make it clear how to enable parameter backup on CubeBlack
uses 16k more ram, but allows auto-restore of corrupted params
2021-10-12 22:08:13 -04:00
Andrew Tridgell 24f40d9049 AP_Mission: allow for more jump commands on high memory boards
and allow override of maximum in custom hwdef.dat
2021-10-13 12:49:12 +11:00
Tom Pittenger e9ce1886c8 GCS_MAVLink: unify DO_SET_CAM_TRIG_DIST for missions and cmd_long 2021-10-12 15:04:00 -07:00
Peter Barker f5d5387358 AP_HAL_SITL: remove unused ext_fifo_fd member variable 2021-10-12 20:07:19 +11:00
Peter Barker e9165fdeab SITL: add simulated RAMTRON device 2021-10-12 20:01:49 +11:00
Peter Barker 67226433e3 AP_HAL_SITL: add simulated RAMTRON device 2021-10-12 20:01:49 +11:00
Peter Barker 437e0e6459 SITL: add simulated SPI devices 2021-10-12 20:01:49 +11:00
Peter Barker 58a7f022fd AP_HAL_SITL: add simulated SPI devices 2021-10-12 20:01:49 +11:00
Andrew Tridgell 1559f7aa2d AP_Logger: added stack logging 2021-10-12 16:04:06 +11:00
Andrew Tridgell 8157c24977 AP_HAL: added stack logging 2021-10-12 16:04:06 +11:00
Andrew Tridgell 84bbc707fc AP_HAL_ChibiOS: added stack logging 2021-10-12 16:04:06 +11:00
auturgy 7c3c3a0a41 HAL_Chibios: support modalai_fc-v1 flight controller
Based on M0018 version. Thanks to ModalAI for assistance
2021-10-12 15:47:51 +11:00
Andrew Tridgell d8c0d82857 AP_RCProtocol: allow DSM bind using uart RX pin directly 2021-10-12 15:47:51 +11:00
Andrew Tridgell 6fa9768eab HAL_ChibiOS: support GPIO get_mode and set_mode 2021-10-12 15:47:51 +11:00
Andrew Tridgell 029743e27a AP_HAL: added support for saving and restoring GPIO settings
this allows for using any pin (eg. UART TX, RX, RTS, CTS) as a GPIO,
and restoring the old mode. Initial use is for spektrum bind on RX pin
2021-10-12 15:47:51 +11:00
Andrew Tridgell 25324ae0e2 HAL_ChibiOS: support SDMMC2 for sdcard 2021-10-12 15:47:51 +11:00
Andrew Tridgell 281b8eb234 AP_BattMonitor: support LTC2946 I2C battery monitoring 2021-10-12 15:47:51 +11:00
Andrew Tridgell 2903e10fc0 AP_BattMonitor: added INA231 backend
only enabled via hwdef.dat for now
2021-10-12 15:47:51 +11:00
Andrew Tridgell 8d9c9d9130 AP_BoardConfig: allow override of BRD_SAFETYENABLE default 2021-10-12 15:47:51 +11:00
Peter Barker 5b8a3c3ff9 SITL: use enumeration in place of O_RDWR for I2C register defs 2021-10-12 14:44:31 +11:00
Iampete1 82cd9e24c3 RC_Channel: add configured_in_storage metthod 2021-10-11 22:19:17 -04:00
Iampete1 d16be50e57 AP_Motors: add PWM min and max param conversion function 2021-10-11 22:19:17 -04:00
Iampete1 14dfac42e7 AP_Motors: remove use of external PWM min and max 2021-10-11 22:19:17 -04:00
Andrew Tridgell d962e094e7 HAL_ChibiOS: change RCIN PULLUP to PULLDOWN
this makes us more consistent between boards
2021-10-12 11:52:36 +11:00
Andrew Tridgell 47da7f5c9b HAL_ChibiOS: change RCIN FLOAT to PULLDOWN
this lowers the chance of noise on a RCIN pin causing incorrect
protocol detection
2021-10-12 11:52:36 +11:00
Nick Exton ffa2bba35c HAL_ChibiOS: add missing return to Dual CDC get_usb_baud() 2021-10-12 10:54:44 +11:00
Andrew Tridgell e6aae3caf6 HAL_ChibiOS: fix G4 I2c bus speeds 2021-10-12 10:54:07 +11:00
Iampete1 0f8bcbf4b8 AP_Scripting: optimise genrated bindings for size 2021-10-12 10:08:56 +11:00
Iampete1 c1dbb1c046 AP_Scripting: change all -FLT_MAX FLT_MAX ranges to no check 2021-10-12 10:08:56 +11:00
Iampete1 302e855dab AP_Scripting: add 'skip_check keyword to skip argument range check 2021-10-12 10:08:56 +11:00
Iampete1 0772af5539 AP_Scripting: generator: dont initalise trivial types 2021-10-12 10:08:56 +11:00
Iampete1 32d6919ae2 AP_Scripting: generator: remove unneeded else in nullable returns 2021-10-12 10:08:56 +11:00
Peter Barker 90f8cbde13 SITL: provide HAL_x_ENABLED for many SITL features
This allows for the feature to be compiled out
2021-10-12 09:04:55 +11:00
Peter Barker aa4f375015 SITL: SIM_RichenPower: remove reference to stderr 2021-10-12 09:00:45 +11:00
Peter Barker c9df857f16 SITL: avoid use of stderr/::fprintf 2021-10-12 09:00:17 +11:00
Peter Barker 94ad32b91c SITL: remove HIL_MODE vestiges 2021-10-12 08:57:05 +11:00
Peter Barker d98cda12c6 AP_HAL_SITL: remove HIL_MODE vestiges 2021-10-12 08:57:05 +11:00
Willian Galvani 34b42d8252 AP_HAL: Navigator: set HAL_BARO_EXTERNAL_BUS_DEFAULT to 6
This is the bus exposed in the board for external sensors.
This is required as HAL_Linux doesn't probe all i2c buses.
2021-10-11 17:57:52 -03:00
Willian Galvani 2feb740a03 AP_Baro: add option to set BARO_EXT_BUS default value
This allows boards to define their own BARO_EXT_BUS default value.
This is mostly relevant for linux boards, as HAL_LINUX doesn't
probe all buses when BARO_EXT_BUS == -1.
2021-10-11 17:57:52 -03:00
tajisoft 68274ff996 AP_Scripting: fix switch check in ahrs-source 2021-10-11 20:59:46 +11:00
Andrew Tridgell 5f6af3567a SRV_Channel: added SERVO_GPIO_MASK
this allows for channels to be set as GPIO without setting
SERVOn_FUNCTION=-1. That allows for use of UAVCAN or SBUS outputs on
those channels with a servo function, while using the aux pin as a
GPIO
2021-10-11 19:28:11 +11:00
Rishabh 13f3d04300 AC_Avoid: Early exit Dijkstra's path finder if destination is found 2021-10-11 02:21:48 -04:00
Andrew Tridgell 08fcfa04ae APM_Control: only save autotune gains when P finished
this prevents saving values which are temporarily high due to tuning
process

See this bug report
https://discuss.ardupilot.org/t/plane-4-1-0-stable/76507/45
2021-10-10 19:00:57 +11:00
Iampete1 f0bc041b86 AP_Gererator: IE Fuel Cell: reset health timer at init 2021-10-08 19:34:34 -04:00
Lucas De Marchi 24adf18685 AP_HAL_Linux: small fixes to cpu affinity
- Do not mention x:y form in the comment since it's not supported
  - Give more detail in the help output regarding the meaning of each form
  - No prints in the helper parse function, let the caller print it
2021-10-08 16:08:52 -07:00
HefnySco 9f1cbdc0a5 AP_HAL_Linux: cpu affinity 2021-10-08 13:47:56 -07:00
Stephen Dade e85f803e27 SITL: Expand multi-drone example 2021-10-08 17:29:10 +11:00
Peter Barker 521918d74c SITL: remove set-but-not-used _framerate member variable 2021-10-08 14:23:18 +11:00
olliw42 312604f577 AP_Mount: add handle_global_position_int() method to backend and use it + little spelling 2021-10-08 14:22:43 +11:00
murata fa609afc44 AP_Scripting: Change the script file name for messages 2021-10-07 18:21:11 -04:00
Josh Henderson 1e0ae4b998 GCS_MAVLINK: Common capacity_remaining_pct checks healthy status and has_current 2021-10-07 22:16:02 +11:00
Josh Henderson ca568953d9 AP_BattMonitor: capacity_remaining_pct add checks for healthy status and has_current 2021-10-07 22:16:02 +11:00
bugobliterator f298ea406e HAL_ChibiOS: enable RNG only for H7 based boards off for the rest by default 2021-10-07 19:43:11 +11:00
bugobliterator fc4d59c5a4 HAL_ChibiOS: setup hw random number generator for stm32 chips 2021-10-07 19:43:11 +11:00
bugobliterator 792e6666a3 HAL_ChibiOS: add random number generator implementation for ChibiOS 2021-10-07 19:43:11 +11:00
bugobliterator e4f4b3ce1f AP_HAL: add true random number generator 2021-10-07 19:43:11 +11:00
Hwurzburg b327f80946 AP_Airspeed: do not cal if backend does not exist 2021-10-07 13:36:44 +11:00
Peter Barker 43e83f18be AP_AHRS: do not send EKF_STATUS_REPORT from DCM
This means that even if you configure DCM as your primary you won't get
its status.

Given the status was currently garbage, this isn't necessarily a bad
thing at the moment.
2021-10-06 19:10:36 +11:00
Peter Barker 2f69dcc085 AP_AHRS: cache some trig results for yaw in DCM backend 2021-10-06 19:10:36 +11:00
Peter Barker 44d56854be AP_AHRS: make AP_AHRS_DCM an AP_AHRS backend 2021-10-06 19:10:36 +11:00
Iampete1 2b402ed2d7 AP_BLHeli: use is_dshot_protocol in place of >= AP_HAL::RCOutput::MODE_PWM_DSHOT150 2021-10-06 18:59:57 +11:00
Iampete1 3b8b90d170 AP_HAL: move is_dshot_protocol to AP_HAL 2021-10-06 18:59:57 +11:00
Iampete1 9751cb5b24 AP_HAL_ChibiOS: move is_dshot_protocol up to AP_HAL 2021-10-06 18:59:57 +11:00
Iampete1 9b02baa5f0 AP_HAL: add note to output_mode enum about params using it 2021-10-06 18:59:57 +11:00
Iampete1 436f9a3f46 AP_BLHeli: move OTYPE to use RCOutput::MODE not AP_Motors::PWM_TYPE 2021-10-06 18:59:57 +11:00
Iampete1 9106835c93 AP_BLHeli: use motors is_digital_pwm_type helper 2021-10-06 18:59:57 +11:00
Iampete1 bc29735cb2 AP_Motors: make pwm_type protected and add helpers 2021-10-06 18:59:57 +11:00
Iampete1 b472300191 AP_MotorsUGV: make pwm_type private and add is_digital_pwm_type method 2021-10-06 18:59:57 +11:00
Iampete1 86e56934b6 AP_Scripting: update analog input example to check for valid pin 2021-10-06 18:42:51 +11:00
Iampete1 f50326c154 AP_WindVane: check for valid analog pins 2021-10-06 18:42:51 +11:00
Iampete1 e5ae023be2 AP_Scripting: AnalogSource set_pin returns bool 2021-10-06 18:42:51 +11:00
Iampete1 8f50eab6c2 AP_RSSI: check for valid analog pin 2021-10-06 18:42:51 +11:00
Iampete1 f667c098a2 AP_RangeFinder: analog: check for valid pin 2021-10-06 18:42:51 +11:00
Iampete1 5ea72bd371 AP_LeakDetector: check for valid analog pin 2021-10-06 18:42:51 +11:00
Iampete1 9f04cded3b AP_HAL_SITL: AnalogSource: return bool for set_pin 2021-10-06 18:42:51 +11:00
Iampete1 62474e6dc8 AP_HAL_Linux: AnalogSource: set_pin return true 2021-10-06 18:42:51 +11:00
Iampete1 f479964c5a AP_HAL_Empty: AnalogSource: return bool 2021-10-06 18:42:51 +11:00
Iampete1 f7cba024c1 AP_HAL_ChibiOS: AnalogSource: check for valid pin 2021-10-06 18:42:51 +11:00
Iampete1 bb04406496 AP_HAL: AnalogSource: set_pin returns bool 2021-10-06 18:42:51 +11:00
Iampete1 19f66803ff AP_BatteryMonitor: Analog: check valid pin 2021-10-06 18:42:51 +11:00
Iampete1 0731af751a AP_Airspeed: analog: check valid pin 2021-10-06 18:42:51 +11:00
Andrew Tridgell 613f970870 AP_Compass: added AK09918 support
minor update over AK09916
2021-10-06 18:16:00 +11:00
Andrew Tridgell 32731e2cd0 AP_Scripting: fixed bug in string logging with logger.write()
this dereferenced a bad pointer, leading to crash and watchdog

thanks to Charlie for finding this!
2021-10-06 18:14:54 +11:00
Andrew Tridgell 33529c98a9 HAL_ChibiOS: check the ROMFS line for IOMCU is added 2021-10-06 06:45:43 +11:00
Andrew Tridgell 52124cf602 HAL_ChibiOS: fixed f1 bootloader build errors 2021-10-06 06:44:36 +11:00
Andrew Tridgell 8deaa1b46b HAL_ChibiOS: fixed warning for USB 2021-10-06 06:44:36 +11:00
Andrew Tridgell 4daf4ad501 HAL_ChibiOS: lock in no warnings for chibios RTOS build 2021-10-06 06:44:36 +11:00
Peter Barker 402669f269 AP_HAL_SITL: add and use HAL_SITL &hal_sitl
analogous to our normal "extern hal" stuff but removes need for casting
2021-10-05 22:24:38 +11:00
Andrew Tridgell 4dbff85de7 HAL_ChibiOS: check for common hwdef.dat errors
catches missing GPIO type, mismatched timers and UARTs or bad pin types
2021-10-05 15:46:02 +11:00
Iampete1 f0a284c1e7 AP_Hal_ChibiOS: R9Pilot: add OUTPUT to GPIO 2021-10-05 15:46:02 +11:00
Iampete1 0143518954 AP_Hal_ChibiOS: mRoControlZeroF7: add OUTPUT to GPIO 2021-10-05 15:46:02 +11:00
Iampete1 a282a39866 AP_Hal_ChibiOS: F4BY: add OUTPUT to GPIO 2021-10-05 15:46:02 +11:00
Iampete1 6f1f26a72a AP_Hal_ChibiOS: CubeOrange: add OUTPUT to GPIO 2021-10-05 15:46:02 +11:00
Peter Barker 919dc26ff6 AP_Camera: use location methods to convert altitudes 2021-10-05 13:54:19 +11:00
Michel Pastor c590e1f1c5 OP_OSD_Screen: make the rangefinder distance element fixed length 2021-10-05 12:15:08 +11:00
Iampete1 5848510876 AP_HAL_ChibiOS: set flow control disabled if no RTS line 2021-10-05 12:11:47 +11:00
Iampete1 2d39836b42 AP_SerialManager: always set options 2021-10-05 12:11:47 +11:00
Michel Pastor a9fed2f9bc RCOutput: fix full throttle bug 2021-10-05 11:47:04 +11:00
Hwurzburg 3b543a8ceb AP_Compass: Change orientation labels to match order of rotation 2021-10-05 11:22:32 +11:00
Hwurzburg 873097c030 AP_AHRS: Change orientation labels to march order of rotation 2021-10-05 11:21:48 +11:00
Peter Barker e4ebea9e26 GCS_MAVLink: use AHRS position for location
This is our canonical source of position.
2021-10-05 10:20:44 +11:00
Peter Barker 07aa00f2b4 GCS_MAVLink: tidy sending of high-latency message 2021-10-05 10:20:44 +11:00
Peter Barker 3292128531 AP_HAL_SITL: allow for selection of Storage backend type at runtime 2021-10-05 10:16:54 +11:00
Peter Barker 102b1c6879 AP_HAL: allow for selection of Storage backend type at runtime 2021-10-05 10:16:54 +11:00
Tom Pittenger 9578b9bcd4 AP_ADSB: Ping200X update health, remove option for external baro, and gnss altitude units bugfix 2021-10-03 09:57:39 -05:00
Shiv Tyagi 9729377bb3 AP_Rangefinder : make get_temp const
This makes backend get_temp methods const

Co-Authored-By: Josh Henderson <69225461+hendjoshsr71@users.noreply.github.com>
2021-10-03 09:21:31 -04:00
Shiv Tyagi 5cca39e50a GCS_Common : send water depth for each rangefinder instance
This sends depth message for each downward facing rangefinder instance which has data.

Co-Authored-By: Josh Henderson <69225461+hendjoshsr71@users.noreply.github.com>
2021-10-03 09:21:31 -04:00
Andrew Tridgell 9a29f2558c HAL_SITL: fixed cygwin build
cygwin does not handle panic being weak, it gets a link error
2021-10-03 14:00:34 +11:00
Andrew Tridgell c15221fd53 HAL_ChibiOS: fixed orientation of ICM42605 on QiotekZealotF427 2021-10-03 14:00:09 +11:00
Andrew Tridgell 6953778b4c HAL_ChibiOS: use micros16() for blheli pass-thru IRQ
saves some IRQ overhead, makes time handling more consistent
2021-10-02 18:26:39 +10:00
Andrew Tridgell 5714ee113f HAL_ChibiOS: added micros16() method 2021-10-02 18:26:39 +10:00
Andrew Tridgell 1283d42fbf AP_HAL: added micros16() method
fast method for both 16 and 32 bit timers
2021-10-02 18:26:39 +10:00
Andrew Tridgell 2aef3364bc HAL_ChibiOS: optimisation for AP_HAL::micros() on systems with 32 bit timers
most ChibiOS boards have a 32 bit timer. This optimisation reduces the
cost of micros() from 0.3us to 0.06us, which is significant in
interrupt handlers and for accurate timing. It takes advantage of the
timer being 32 bit with 1MHz clock
2021-10-02 18:26:39 +10:00
Iampete1 1371499022 AP_Motors: add note about test to new inverse functions 2021-10-01 22:04:51 +01:00
Iampete1 484a0b989f AP_Motors: add expo inverse test example 2021-10-01 22:04:51 +01:00
Iampete1 0c1fe0b373 AP_MotorsMulticopter: add inverse thrust_to_actuator and thrust curve functions 2021-10-01 22:04:51 +01:00
lthall d5286ec533 AC_AttitudeControl: Fix initialize bug 2021-10-01 13:14:46 -04:00
Peter Barker 4aeb85d080 GCS_MAVLINK: correct mavlink return code when wiping storage header 2021-10-01 11:39:25 +10:00
bugobliterator ae65f2e6ab AP_GPS: fix build and working with single GPS Receiver config 2021-09-30 21:53:07 +10:00
Andrew Tridgell aa05629ef6 AP_HAL: added peekiovec test
fixes #18285
2021-09-30 12:46:07 +10:00
Peter Barker df7b2982d3 AP_Filesystem: add fgets 2021-09-30 10:31:03 +10:00
Peter Barker 3f37a21aaf GCS_MAVLink: set message intervals from config files 2021-09-30 10:31:03 +10:00
bugobliterator dd9f513aa5 AP_HAL_ChibiOS: setup led control via lua script for HerePro 2021-09-30 08:52:27 +10:00
bugobliterator d23e37e3bb AP_Scripting: add script for controling herepro leds per vehicle state 2021-09-30 08:52:27 +10:00
bugobliterator e666e460f9 AP_Scripting: add periph methods for getting vehicle states 2021-09-30 08:52:27 +10:00
bugobliterator 2673cde52b AP_UAVCAN: add dsdl for sending vehicle notify state 2021-09-30 08:52:27 +10:00
bugobliterator e4c6c0ad17 AP_UAVCAN:add support for sending Vehicle Notify state 2021-09-30 08:52:27 +10:00
Siddharth Purohit 24448d6adf AP_Scripting: add rgb control for independent LEDs 2021-09-30 08:52:27 +10:00
bugobliterator 756972a80b AP_DAL: replace config_error with allocation_error 2021-09-30 08:51:26 +10:00
bugobliterator f5ee2a3a50 AP_CANManager:replace config_error with allocation_error 2021-09-30 08:51:26 +10:00
bugobliterator fd369e8262 AP_UAVCAN: throw allocation error when failing to allocate 2021-09-30 08:51:26 +10:00
bugobliterator b897f984a7 AP_UAVCAN: use config error instead of panic on allocation failure 2021-09-30 08:51:26 +10:00
bugobliterator 224abe7933 AP_ExternalAHRS: use config error instead of panic on allocation failure 2021-09-30 08:51:26 +10:00
Ben Wolsieffer 68ee2c21dd AP_Control: apply pitch rate limit to turn coordination
At high bank angles, for example when rolling to/from inverted, a large turn
coordination pitch rate offset is requested. Before this patch, this offset was
not subject to the configured pitch rate limit, which could result in pitch
controller integrator windup.
2021-09-29 17:03:32 +01:00
Gone4Dirt 0038b8edd7 StorageManager: Add APM_BUILD_Heli 2021-09-29 19:55:48 +10:00
Gone4Dirt ab07a7c4fa SRV_Channel: Add APM_BUILD_Heli 2021-09-29 19:55:48 +10:00
Gone4Dirt a0245a2640 GCS_MAVLink: Add APM_BUILD_Heli 2021-09-29 19:55:48 +10:00
Gone4Dirt f8ed6426a9 AP_Scripting: Add APM_BUILD_Heli 2021-09-29 19:55:48 +10:00
Gone4Dirt 55f6feac9a AP_Scheduler: Add APM_BUILD_Heli 2021-09-29 19:55:48 +10:00
Gone4Dirt e0af10886b AP_RangeFinder: Add APM_BUILD_Heli 2021-09-29 19:55:48 +10:00
Gone4Dirt 9b7b9c351a AP_Rally: Add APM_BUILD_Heli 2021-09-29 19:55:48 +10:00
Gone4Dirt e5488e1869 AP_OSD: Add APM_BUILD_Heli 2021-09-29 19:55:48 +10:00
Gone4Dirt 0abfde0a7d AP_NavEKF3: Add APM_BUILD_Heli 2021-09-29 19:55:48 +10:00
Gone4Dirt 9090cb1271 AP_NavEKF2: Add APM_BUILD_Heli 2021-09-29 19:55:48 +10:00
Gone4Dirt 290794bf93 AP_InertialSensor: Add APM_BUILD_Heli 2021-09-29 19:55:48 +10:00
Gone4Dirt 79787d55cc AP_GyroFFT: Add APM_BUILD_Heli 2021-09-29 19:55:48 +10:00
Gone4Dirt 40f8407c1d AP_CANManager: Add APM_BUILD_Heli 2021-09-29 19:55:48 +10:00
Gone4Dirt a97cafbaad AP_BLHeli: Add APM_BUILD_Heli 2021-09-29 19:55:48 +10:00
Gone4Dirt 1d02ac768d AP_BattMonitor: Add APM_BUILD_Heli 2021-09-29 19:55:48 +10:00
Gone4Dirt 4421e4a842 AP_Arming: Add APM_BUILD_Heli 2021-09-29 19:55:48 +10:00
Gone4Dirt 94b97313be AP_AHRS: Add APM_BUILD_Heli 2021-09-29 19:55:48 +10:00
Gone4Dirt 765f6b69fa AC_Avoidance: Add APM_BUILD_Heli 2021-09-29 19:55:48 +10:00
Gone4Dirt 7c20658acf AP_Vehicle: Add Heli build type 2021-09-29 19:55:48 +10:00
Iampete1 b6de44cc7b AP_HAL_ChibiOS: CubeOrange: add alt config for telem1 RTS CTS as GPIO 2021-09-29 19:55:21 +10:00
Iampete1 8ae5bc5ad0 AP_HAL_ChibiOS: hwdef: allow GPIO alt config 2021-09-29 19:55:21 +10:00
Iampete1 a96150a528 AP_HAL_ChibiOS: allow enabling GPIO as alt config 2021-09-29 19:55:21 +10:00
Iampete1 dc45a113f9 AP_HAL_ChibiOS:UARTDriver: allow re-defintion of RTS and CTS pins 2021-09-29 19:55:21 +10:00
Iampete1 eeb5dd3c96 AP_SerialManger: always run set_options 2021-09-29 19:55:21 +10:00
Iampete1 0e0cc36f8f AP_BoardConfig: remove ALT_CONFIG param if no alt config is posible 2021-09-29 19:55:21 +10:00
bugobliterator 1a6179148b AP_IOMCU: ensure page_GPIO is aligned to 16bit 2021-09-29 19:08:10 +10:00
Peter Barker 8ce4a1fce7 AP_Camera: use AP_AHRS singleton to get current location and home 2021-09-29 18:33:01 +10:00
Andrew Tridgell e85594e423 HAL_ChibiOS: added KakuteH7 support 2021-09-29 18:11:04 +10:00
Andrew Tridgell d1d5cd5d9f HAL_ChibiOS: fix sdcard on SPI bus on H7
the spiIgnore() call was hanging on H7. The ChibiOS submodule change
fixes that, but this patch is also needed to ensure we timeout any
spiIgnore calls correctly
2021-09-29 18:11:04 +10:00
Andrew Tridgell 2c2c85c4d8 HAL_ChibiOS: fixed polled SPI 2021-09-29 18:11:04 +10:00
Andrew Tridgell 27e93155f4 HAL_ChibiOS: fixed build on boards with OTG2 and no CAN interfaces 2021-09-29 18:11:04 +10:00
Peter Barker d7ff072d26 SITL: remove mtk GPSs 2021-09-29 17:28:59 +10:00
Peter Barker 6bd2bc2179 AP_HAL_SITL: remove mtk GPSs
These are ancient and of very poor quality.
2021-09-29 17:28:59 +10:00
Peter Barker 068f91169c AP_GPS: remove mtk GPSs
These are ancient and of very poor quality.
2021-09-29 17:28:59 +10:00
Pierre Kancir c676d4772f AP_ONVIF: use correct #pragma GCC diagnostic pop 2021-09-29 17:27:29 +10:00
Pierre Kancir c12217eeb5 AP_HAL: use correct #pragma GCC diagnostic pop 2021-09-29 17:27:29 +10:00
Pierre Kancir cceaa1e2fc AP_Common: use correct #pragma GCC diagnostic pop 2021-09-29 17:27:29 +10:00
Iampete1 6aa8319b90 AP_Scripting: re-emmit error messages every 10 seconds if SCR_DEBUG_LVL > 0 2021-09-29 17:11:18 +10:00
Peter Barker 207f38dfaf AP_Filesystem: raise an internal error for fileop on main thread
#ecoefi.log
2021-09-29 15:50:52 +10:00
Tatsuya Yamaguchi 0b06d4072e AP_OSD: remove OSDn_BTEMP_* params when BARO_MAX_INSTANCES=1 2021-09-29 10:51:14 +10:00
Tatsuya Yamaguchi f249fe7eb2 AP_Hott_Telem: cope with BARO_MAX_INSTANCES = 1 2021-09-29 10:51:14 +10:00
Tatsuya Yamaguchi f3173174f3 SITL: cope with BARO_MAX_INSTANCES < 3 2021-09-29 10:51:14 +10:00
Josh Henderson 67eb6d17eb AP_NavEKF3: initialize stateStruct.quat to unit length 2021-09-28 19:09:16 +10:00
Josh Henderson 9a274ba565 AP_NavEKF2: initialize stateStruct.quat to unit length 2021-09-28 19:09:16 +10:00
Josh Henderson 9b74452270 AP_Math: add Internal_Error for quaternion of 0 length 2021-09-28 19:09:16 +10:00
Peter Barker 8d00152815 AC_AutoTune: stop specifying bit-widths for state
new: bin/arducopter  1670916  2544  194276  1867736
master: bin/arducopter  1671232  2544  194272  1868048

   new: bin/arduplane  1670692  2452  194364  1867508
master: bin/arduplane  1671012  2452  194364  1867828
2021-09-28 11:00:30 +10:00
Andrew Tridgell f148c3fc44 AP_Logger: fixed stuck logging with LOG_DISARMED=1
this prevents a stuck write closing logging when LOG_DISARMED=1
2021-09-28 10:47:48 +10:00
Peter Barker 143f23db89 AP_Logger: move SBP logging structures into AP_GPS 2021-09-28 10:45:51 +10:00
Peter Barker da66ecf1f2 AP_GPS: move SBP logging structures into AP_GPS 2021-09-28 10:45:51 +10:00
Dr.-Ing. Amilcar do Carmo Lucas 52c39bc382 GCS_MAVLink: add ESC_TELEMETRY_1_TO_4 to the mavlink_id_to_ap_message_id table 2021-09-28 10:01:16 +10:00
Shiv Tyagi 5f94986af1 GCS_Common : Mavlink wrap when battery percentage is above 100
When calculated battery percentage is above 100 we wrap it to INT8_MAX
2021-09-28 09:54:55 +10:00
Iampete1 3ae8dfead4 AP_Relay: update param description to inclde IOMCU 2021-09-28 09:40:25 +10:00
Iampete1 ade01f41d9 AP_HAL_ChibiOS: support digital write via IOMCU 2021-09-28 09:40:25 +10:00
Iampete1 ba58cb86db AP_IOMCU: support digital write 2021-09-28 09:40:25 +10:00
Iampete1 12d5fbbc86 AP_IOMCU: iofirmware: support digital write 2021-09-28 09:40:25 +10:00
Iampete1 69624b1c1b AP_BatteryMoniter: add plane Loiter to QLand failsafe action 2021-09-28 09:31:13 +10:00
Iampete1 d566b24c04 AP_Vehickle: add Loiter alt then QLAND mode reasons 2021-09-28 09:31:13 +10:00
Iampete1 407b70b82e AP_Common: location: add get alt distance method 2021-09-28 09:31:13 +10:00
Iampete1 3d566ca59b RC_Channel: add trim to current servo and RC option 2021-09-28 09:16:24 +10:00
Josh Henderson 4d7dddf337 SITL: sim_MS5611 fix simulated driver for 32bit usage 2021-09-28 09:15:11 +10:00
Josh Henderson 1019628ae4 SITL: test_ms5611 fix <-15C test case 2021-09-28 09:11:48 +10:00
Josh Henderson 9a7530ad50 AP_HAL_Linux: make panic() WEAK 2021-09-28 09:11:48 +10:00
Josh Henderson 328cf01436 AP_HAL_SITL: make panic() WEAK 2021-09-28 09:11:48 +10:00
Josh Henderson 0ae1536e4a AP_InternalError: change panic to return error code as string in SITL 2021-09-28 09:11:48 +10:00
Josh Henderson 6c3612b51d AP_Common: enable SITL unit testing
apcommon
2021-09-28 09:11:48 +10:00
Josh Henderson 0125ae26ac AP_Math: enable SITL unit testing 2021-09-28 09:11:48 +10:00
Peter Barker 1ae8385a0f AP_GPS: correct GPS switching when GPS blending disabled 2021-09-28 09:08:50 +10:00
Sebastian Quilter 69120fa1c7 AP_OSD: #if sidebars 2021-09-28 09:04:45 +10:00
Sebastian Quilter 9a58ccb3cd AP_OSD: sidebar support for remaining 4 fonts 2021-09-28 09:04:45 +10:00
Sebastian Quilter 2379036e9a AP_OSD: Add sidebars for MAX7456 2021-09-28 09:04:45 +10:00
Iampete1 b6a73dd3d0 RC_Channel: renstate ArmDisarm Discription with 4.1 note 2021-09-27 13:33:54 +01:00
Andrew Tridgell 4aa88d172c HAL_ChibiOS: adjust Swan-K1 parameters
limit down pitch to 15 degrees to prevent overspeed, and limit angular
rates to 100 deg/s
2021-09-27 21:21:53 +10:00
Andy Piper 20a91dc1c8 AP_SerialManager: correct docs for SERIAL8 2021-09-26 19:51:50 +01:00
Iampete1 25aedc4ee7 AP_Proximity: lower SF45B update rate 2021-09-26 20:26:20 +09:00
Peter Barker b0e59b2611 RC_Channel: rename GENERATOR_ENABLED to HAL_GENERATOR_ENABLED 2021-09-26 19:24:09 +10:00
Peter Barker 341379c5bd GCS_MAVLink: rename GENERATOR_ENABLED to HAL_GENERATOR_ENABLED 2021-09-26 19:24:09 +10:00
Peter Barker d86e2792fd AP_Vehicle: rename GENERATOR_ENABLED to HAL_GENERATOR_ENABLED 2021-09-26 19:24:09 +10:00
Peter Barker 43469955a9 AP_HAL_ChibiOS: rename GENERATOR_ENABLED to HAL_GENERATOR_ENABLED 2021-09-26 19:24:09 +10:00
Peter Barker 5433cbe9a5 AP_Generator: rename GENERATOR_ENABLED to HAL_GENERATOR_ENABLED 2021-09-26 19:24:09 +10:00
Peter Barker f71b4ec568 AP_BattMonitor: rename GENERATOR_ENABLED to HAL_GENERATOR_ENABLED 2021-09-26 19:24:09 +10:00
Peter Barker d9844cc75a AP_Arming: rename GENERATOR_ENABLED to HAL_GENERATOR_ENABLED 2021-09-26 19:24:09 +10:00
TunaLobster dd379af7cc AP_Scripting: Add Z logger format to example 2021-09-25 14:00:00 +01:00
Peter Barker 0d03cef48b AP_ADSB: tidy sending of SageTech RF mode
Saves 64 bytes on CubeBlack
2021-09-25 15:55:53 +10:00
Tom Pittenger de753f386c AP_Vehicle: fix periph-heavy compile errors when INS is disabled 2021-09-24 10:47:13 -05:00
Tom Pittenger fcfaab4beb AP_Frsky_Telem: fix periph-heavy compile errors with different things enabled 2021-09-24 10:47:13 -05:00
Tom Pittenger d45526ff42 AP_Compass: fix periph-heavy compile errors with different things enabled 2021-09-24 10:47:13 -05:00
Tom Pittenger 6ac1b7daf2 GCS_MAVLink: fix periph-heavy compile errors with different things enabled 2021-09-24 10:47:13 -05:00
Josh Henderson 27fa2e776d AP_HAL_ChibiOS: Hitec-Airspeed move from HAL_NO_GCS to HAL_GCS_ENABLED 2021-09-24 21:05:05 +10:00
Andrew Tridgell 6d093e56fb HAL_ChibiOS: added Nucleo-L496 AP_Periph target 2021-09-24 18:08:00 +10:00
Andrew Tridgell ca45fcbc70 AP_FlashStorage: support L496 MCUs 2021-09-24 18:08:00 +10:00
Andrew Tridgell 0212e23cd3 HAL_ChibiOS: added support for STM32L496 MCUs
good MCU for AP_Periph
2021-09-24 18:08:00 +10:00
lthall 31e7d672c9 AC_AttitudeControl: AC_PosControl: Update PSC logging to include desired 2021-09-23 20:07:52 +09:00
Leonard Hall 087a2b92c3 AP_Logger: Update PSC logging to include desired 2021-09-23 20:07:52 +09:00
Leonard Hall 77fbcf1741 AP_Math: Control: add expo calculation. 2021-09-23 20:03:53 +09:00
Paul Riseborough c828bdfbc9 AP_NavEKF3: Reduce output observer vertical velocity error when bad IMU 2021-09-23 18:55:28 +10:00
Paul Riseborough 8429c66860 AP_NavEKF3: Make subsequent bad IMU event detections faster 2021-09-23 18:55:28 +10:00
Paul Riseborough 458c67639d AP_NavEKF3: Force velocity state to follow GPS when IMU data is bad 2021-09-23 18:55:28 +10:00
Paul Riseborough c0d88e2673 AP_NavEKF3: Fix vertical velocity reset
Fixes bug that prevents the vertical velocity being reset to the GPS if the position aiding has already timed out and improves sensitivity of the bad IMU data check.
2021-09-23 18:55:28 +10:00
Paul Riseborough 17c2ba5ac1 AP_NavEKF3: Fix bug causing too frequent resets if bad IMU data detected 2021-09-23 18:55:28 +10:00
Peter Barker f0efc1300e AP_HAL_Linux: move defines of GPIO LOW/HIGH into cpp file
Insane having these generic defines happening if you include GPIO_BBB.h
2021-09-22 21:37:00 +10:00
Peter Barker 9c24916115 AP_HAL_SITL: move from HAL_NO_GCS to HAL_GCS_ENABLED 2021-09-22 21:37:00 +10:00
Peter Barker 275457fd2c AP_HAL_Linux: move from HAL_NO_GCS to HAL_GCS_ENABLED 2021-09-22 21:37:00 +10:00
Peter Barker 6ce79785b5 AP_OSD: move from HAL_NO_GCS to HAL_GCS_ENABLED 2021-09-22 21:37:00 +10:00
Peter Barker dac4134533 AP_InertialSensor: move from HAL_NO_GCS to HAL_GCS_ENABLED 2021-09-22 21:37:00 +10:00
Peter Barker df3cfe12a9 AP_VisualOdom: move from HAL_NO_GCS to HAL_GCS_ENABLED 2021-09-22 21:37:00 +10:00
Peter Barker 4b5525f53e SITL: move from HAL_NO_GCS to HAL_GCS_ENABLED 2021-09-22 21:37:00 +10:00
Peter Barker 224ff97f5c AP_Compass: move from HAL_NO_GCS to HAL_GCS_ENABLED 2021-09-22 21:37:00 +10:00
Peter Barker 9f6b9c7519 GCS_MAVLink: move from HAL_NO_GCS to HAL_GCS_ENABLED 2021-09-22 21:37:00 +10:00
Peter Barker d6e5f8398d AP_RTC: move from HAL_NO_GCS to HAL_GCS_ENABLED 2021-09-22 21:37:00 +10:00
Peter Barker 0305a79b7b AP_Param: move from HAL_NO_GCS to HAL_GCS_ENABLED 2021-09-22 21:37:00 +10:00
Peter Barker b66fd214f0 AP_NavEKF3: move from HAL_NO_GCS to HAL_GCS_ENABLED 2021-09-22 21:37:00 +10:00
Peter Barker 4aa6c212d2 AP_MSP: move from HAL_NO_GCS to HAL_GCS_ENABLED 2021-09-22 21:37:00 +10:00
Peter Barker fec9d4850d AP_Logger: move from HAL_NO_GCS to HAL_GCS_ENABLED 2021-09-22 21:37:00 +10:00
Peter Barker 1976b2b859 AP_HAL: move from HAL_NO_GCS to HAL_GCS_ENABLED 2021-09-22 21:37:00 +10:00
Peter Barker 1bd62362a4 AP_HAL_ChibiOS: move from HAL_NO_GCS to HAL_GCS_ENABLED 2021-09-22 21:37:00 +10:00
Peter Barker 6d615a3e16 AP_GPS: move from HAL_NO_GCS to HAL_GCS_ENABLED 2021-09-22 21:37:00 +10:00
Peter Barker df9de582e4 AP_DAL: move from HAL_NO_GCS to HAL_GCS_ENABLED 2021-09-22 21:37:00 +10:00
Peter Barker b18bdb80d6 AP_BattMonitor: move from HAL_NO_GCS to HAL_GCS_ENABLED 2021-09-22 21:37:00 +10:00
Peter Barker cf9a774bc2 AP_Baro: move from HAL_NO_GCS to HAL_GCS_ENABLED 2021-09-22 21:37:00 +10:00
Peter Barker 22e9ad4818 AP_Airspeed: move from HAL_NO_GCS to HAL_GCS_ENABLED 2021-09-22 21:37:00 +10:00
Peter Barker 8f6bed23cf AP_AccelCal: move from HAL_NO_GCS to HAL_GCS_ENABLED 2021-09-22 21:37:00 +10:00
bugobliterator b43c9961a3 AP_Param: disable format security 2021-09-22 21:36:34 +10:00
bugobliterator f3fef657f9 AP_GPS: handle failure to allocation of GPS CAN message subscribers 2021-09-22 21:36:34 +10:00
bugobliterator 0de393bf7f AP_BoardConfig: add allocation failure handling loop 2021-09-22 21:36:34 +10:00
Tatsuya Yamaguchi 1dcc5c3030 AP_BattMonitor: cope with AP_BATT_MONITOR_MAX_INSTANCES < 9 2021-09-22 18:58:12 +10:00
Iampete1 955be569a3 AP_Scripting: add forward flight motor shutdown applet 2021-09-22 18:16:32 +10:00
yaapu 6a459af624 AP_OSD: decrease blink frequency from 2Hz to 1Hz on MSP DisplayPort
Allows to actually see the blinking on hardware with a slow screen refresh rate
2021-09-22 18:06:12 +10:00
yaapu 9acfdaaa19 AP_OSD: added packed decimal support to MSP DisplayPort
This allows to take advantage of ArduPilot's compact decimal fonts
2021-09-22 18:06:12 +10:00
yaapu f33d6c4ec1 AP_MSP: fix rssi rounding issue 2021-09-22 17:09:50 +10:00
Pierre Kancir d853d16c42 AP_Math: fix vectorN ctor warning by using C++11 brace initilization in all cases 2021-09-21 20:51:37 +10:00
Paul Riseborough e9c339a0a0 AP_NavEKF3: fix wind speed covariance initialisation bug 2021-09-21 17:16:36 +10:00
Andrew Tridgell 758ce2699e HAL_ChibiOS: added Hitec-Airspeed hwdef 2021-09-21 13:51:40 +10:00
Andrew Tridgell 7f59366cc0 HAL_ChibiOS: process AIRSPEED lines in hwdef.dat 2021-09-21 13:51:40 +10:00
Andrew Tridgell f65620f4f3 AP_Airspeed: allow for an AIRSPEED list in hwdef.dat
this saves a lot of flash by only including specific drivers
2021-09-21 13:51:40 +10:00
Peter Barker f07d40a570 AP_Mission: fix infinite loop with nav commands that won't start
Discovered this when trying to run the standard CMAC mission on Sub
2021-09-21 13:42:01 +10:00