Commit Graph

28302 Commits

Author SHA1 Message Date
Peter Barker d8d73eb44c AP_OpticalFlow: adjust for backend file name change 2021-12-28 10:16:20 +11:00
Peter Barker 3a22ee2cc7 AP_OpticalFlow: rename OpticalFlow_backend files to include AP_ 2021-12-28 10:16:20 +11:00
Peter Barker 20c91c03a2 AP_OpticalFlow: rename OpticalFlow.cpp to AP_OpticalFlow.cpp 2021-12-28 10:16:20 +11:00
Peter Barker 6936a8eb6e GCS_MAVLink: adjust for rename of OpticalFlow.h to AP_OpticalFlow.h 2021-12-28 10:16:20 +11:00
Peter Barker f99f2bd8ab AP_Scripting: adjust for rename of OpticalFlow.h to AP_OpticalFlow.h 2021-12-28 10:16:20 +11:00
Peter Barker 3030c0b4f8 AP_OpticalFlow: adjust for rename of OpticalFlow.h to AP_OpticalFlow.h 2021-12-28 10:16:20 +11:00
Peter Barker e8fc4b33e1 AP_OpticalFlow: move OpticalFlow.h to AP_OpticalFlow.h 2021-12-28 10:16:20 +11:00
Andrew Tridgell 6a2303f72d hwdef: enable telem3 (SERIAL5) TX on Pix32v5
this is now safe as we disable the TX/RX pins on ports with
SERIALn_PROTOCOL = -1

as this board defaults to protocol -1 for SERIAL5, we can enable this
if the user wishes to use telem3
2021-12-28 10:13:58 +11:00
Andrew Tridgell 97fee2d1cc AP_VisualOdom: added VOXL backend type
this will make it easier to have custom behaviour for VOXL
2021-12-27 12:32:41 +11:00
Andrew Tridgell 8654ea886d AP_VisualOdom: support error estimates with quaternion 2021-12-27 12:32:41 +11:00
Andrew Tridgell 20dd667fdc GCS_MAVLink: support ODOMETRY message for VIO
used by VOXL
2021-12-27 12:32:41 +11:00
Andrew Tridgell 05f112ea17 SITL: support simulation of ODOMETRY message 2021-12-27 12:32:41 +11:00
Nikolay March cceae1acf3 hwdef: Redefine DMA priority PH4-mini
BUG.
Without redefining priority there is no DMA on any RX of serial ports.
Now it is.
Without DMA, you cannot normally use the serial port for the CRSF protocol.
2021-12-27 11:25:51 +11:00
Shiv Tyagi fa6adc0beb SITL: add JEDEC dataflash simulator
We currently use AP_Logger_SITL for this purpose but we can instead add a dataflash simulator which can work with existing AP_Logger_Dataflash backend instead of using AP_Logger_SITL.

Co-Authored-By: Divyateja Pasupuleti <divyateja2004@gmail.com>
2021-12-25 09:14:31 +11:00
Shiv Tyagi 3533e1e0ed AP_Logger: remove AP_Logger_SITL
We now use jedec dataflash simulator for this purpose. Hence, we should remove these files and all references to HAL_LOGGING_SITL_ENABLED

Co-Authored-By: Divyateja Pasupuleti <divyateja2004@gmail.com>
2021-12-25 09:14:31 +11:00
Shiv Tyagi af950e266b AP_HAL_SITL: add dataflash to spi device table
We simulate jedec flash for logging. Hence, we need to add dataflash to device table. Also, we need to remove HAL_LOGGING_SITL_ENABLED since we no longer need it

Co-Authored-By: Divyateja Pasupuleti <divyateja2004@gmail.com>
2021-12-25 09:14:31 +11:00
Peter Barker 939407a26f AP_NMEA_Output: remove pointless use of intermediate res variables 2021-12-23 21:04:18 +11:00
Peter Barker 97ea8b52af AP_Baro: KellerLD: clean up reading of calibration data
Co-authored-by: Josh Henderson <hendjoshsr71@gmail.com>

Checks all return values from transfer functions to avoid use of
uninitialised data.
2021-12-22 18:50:58 +11:00
yaapu c0663da918 AP_RCTelemetry: added ExpressLRS support 2021-12-22 18:48:49 +11:00
yaapu 55bfa41d13 AP_RC_Protocol: added ExpressLRS support 2021-12-22 18:48:49 +11:00
yaapu 76bd10bf02 AP_RCProtocol: added custom telemetry frame types and subtypes to debug trace 2021-12-22 18:48:49 +11:00
mateksys be601acd89 AP_HAL_ChibiOS: add MatekF405-TE hwdef 2021-12-22 18:47:37 +11:00
Peter Hall 98c5704b92 AP_TECS: add reset throttle I function 2021-12-22 18:46:14 +11:00
Andy Piper fbaa2e7b09 AP_Math: allow selection of inline version of vector operations for performance. 2021-12-22 18:23:33 +11:00
Andy Piper fbdeea2d03 Filter: optimize hot parts of notch filter updates 2021-12-22 18:23:33 +11:00
Andy Piper 6e3b502110 AP_InertialSensor: inline vector ops for backends and temp cal 2021-12-22 18:23:33 +11:00
Andy Piper 9ba1cbc9d8 AP_Vehicle: log up to 12 harmonic notch frequencies 2021-12-22 18:13:38 +11:00
Andy Piper c50ccd1d09 AP_GyroFFT: use harmonics for harmonics and number of notches elsewhere
modify energy based on peak width
always log harmonic notch frequencies
2021-12-22 18:13:38 +11:00
Andy Piper 5259272326 AP_HAL_Empty: remove redundant harmonics from DSP 2021-12-22 18:13:38 +11:00
Andy Piper fa91e74fde AP_HAL_SITL: remove redundant harmonics from DSP 2021-12-22 18:13:38 +11:00
Andy Piper 2fab99d647 AP_HAL_ChibiOS: remove redundant harmonics from DSP 2021-12-22 18:13:38 +11:00
Andy Piper d4024d9216 AP_HAL: allow configuration of maximum number of notches based on MCU type
increase notch filters in SITL
remove redundant harmonics from DSP
2021-12-22 18:13:38 +11:00
Andy Piper d44478ff59 AP_InertialSensor: calculate number of notches based on motor count
configure default harmonics if dynamic harmonics
set number of notches correctly for FFT operation
include static notch in filter calculation and allow harmonic options on static notch
2021-12-22 18:13:38 +11:00
Andy Piper 34920ebd60 Filter: allow harmonics and notch-per-motor in harmonic notch
allow default harmonics to be configured
allow combination of harmonics and indpendent centre frequencies
pre-calculate number of harmonics
2021-12-22 18:13:38 +11:00
arbalasquide fd3c83c0d1 AP_Math: Add AUS_TO_MAH definition 2021-12-22 07:52:03 +11:00
arBalasquide 10b4eebce4 AP_BattMonitor: Add calculate_mah, add unit tests 2021-12-22 07:52:03 +11:00
Andrew Tridgell 08ca708347 AP_SerialManager: fixed AP_Periph GPS
the disable of RX/TX pins broke AP_Periph on boards that don't enable
the GCS, as they don't have the SERIALn parameters, so we disable the
UART pins of the GPS
2021-12-21 20:14:55 +11:00
Andrew Tridgell ba58558bd1 SITL: fixed default BATT_CAPACITY for SITL
don't override from JSON model unless we have a value
2021-12-21 19:53:43 +11:00
Mingchen Zhang 61e0c5b6e7 AP_SmartAudio: fix a bug that would starve the lower priority thread, such as scripting. 2021-12-21 16:03:44 +09:00
Randy Mackay e41cad8bd7 SRV_Channel: minor param desc format fix 2021-12-21 14:45:49 +09:00
Brad Stinson cd39110b68 hwdef: add support for PixC4-Jetson
add support for building IOMCU with F103 and 8MHz clock
2021-12-21 13:05:34 +11:00
Andrew Tridgell a39040d864 AC_AutoTune: limit autotune target rates to parameter limits
this makes it safer to autotune a large vehicle which may become
unstable at very high target rates
2021-12-21 11:02:51 +09:00
Andrew Tridgell 53f1fc1295 AC_AttitudeControl: added get_ang_vel_yaw_max_rads() 2021-12-21 11:02:51 +09:00
Andrew Tridgell 178ae9e0c1 AP_RCTelemetry: use have_serial when detecting
avoid find_serial() as it changes port options
2021-12-21 11:07:44 +11:00
Andrew Tridgell 366ff24941 AP_RangeFinder: use have_serial when detecting
avoid find_serial() as it changes port options
2021-12-21 11:07:44 +11:00
Andrew Tridgell 93d8a0606f AP_Proximity: use have_serial when detecting
avoid find_serial() as it changes port options
2021-12-21 11:07:44 +11:00
Andrew Tridgell 0da0f6dd37 AP_ADSB: use have_serial when detecting
avoid find_serial() as it changes port options
2021-12-21 11:07:44 +11:00
Andrew Tridgell 47590a55ff AP_RCProtocol: allow changes of serial settings between protocols
if we are searching for new protocols then allow for baudrate table
changes
2021-12-21 11:07:44 +11:00
Andrew Tridgell deb2d6b782 AP_SerialManager: added have_serial() method
this checks if we have the protocol without setting the options on the
uart
2021-12-21 11:07:44 +11:00
Peter Barker 600b085cf3 AP_Logger: correct constraint of maximum message ID 2021-12-21 10:42:18 +11:00