Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
10,436 Commits 71 Branches 509 Tags 716 MiB
Commit Graph

2758 Commits

Author SHA1 Message Date
Robert Lefebvre c812d07993 TradHeli: Creating motor_runup_complete bool which is to confirm that the heli motor is running. This will be used for advanced features in the future. 2013-07-19 16:16:08 +09:00
Robert Lefebvre b4863dc997 TradHeli: Change to throttle controller to allow swash plate collective to move, even if disarmed, if we are in Acro or Stab. This is slightly dangerous... as a user could cause a problem if they do not follow the proper usage procedures. If they do not route the ESC through the APM, but instead direct to Rx. And then if they do not Arm, they could take off in Stab mode while disarmed, but then when they switch to Alt_Hold, it will drop the collective to the bottom and they will fall. This can be saved by switching back to Stab. And it requires operation outside of the normal operating procedure. 
This change is being made because most heli users expect to be able to check the swash plate operation before arming and taking off.
 2013-07-19 16:16:04 +09:00
Robert Lefebvre cea0812b82 TradHeli: Rate PID Improvement. Limit Integrator wind-up when PID output is saturated. Also a little bit of general clean-up for readability. 2013-07-19 16:16:01 +09:00
Craig3DR e25b8933f3 Copter: Remove CH7 & CH8 Enable / Disable of GeoFence 2013-07-18 17:06:53 +09:00
Andrew Tridgell 0b27bb05d4 Copter: fixed FENCE and WPNAV parameter doc generation 2013-07-18 14:58:24 +10:00
Randy Mackay 41ba4a1ed2 Copter: initialise ch7 and ch8 aux switches 
This ensures that if you have simple mode or sonar attached to an
auxiliary switch it will be enabled or disabled according to the switch
immediately after start-up
 2013-07-16 22:05:59 +09:00
Randy Mackay 1dcc5886d0 Copter: ensure take-off alt is at least 1m 
fixes issue #377
 2013-07-16 15:51:18 +09:00
Randy Mackay e6412b6996 Copter: do not spin motors during arming process 2013-07-16 12:47:57 +09:00
Jonathan Challinger 9f51a4a4f7 Copter: Cancel arming if throttle input above cruise_throttle. 2013-07-16 12:47:55 +09:00
Jonathan Challinger 2725f219cb Copter: Warn user with motors while copter is arming 2013-07-16 12:47:51 +09:00
Randy Mackay 02b64e259d Copter: bug fix for descent during loiter_turns 2013-07-15 20:44:56 +09:00
Andrew Tridgell 9a159a5e23 Copter: make wp_distance static 
removed hack with AP_Camera library
 2013-07-15 09:56:45 +10:00
Randy Mackay 47ab02d686 Copter: bug fix to ROI to pull target from conditional command queue 2013-07-14 17:37:06 +09:00
Randy Mackay f1969d5662 Copter: switch from NAV_ROI to DO_SET_ROI 2013-07-14 17:37:05 +09:00
Randy Mackay 2b5f6e2668 Copter: pre-arm checks for rc ch 1~4 min and max 2013-07-13 21:38:22 +09:00
Randy Mackay 213472102c Copter: pre-arm check of throttle failsafe value 
Check throttle min is above throttle failsafe trigger and that trigger
is above ppm encoder's loss-of-signal value of 900
 2013-07-13 20:25:34 +09:00
Randy Mackay 6bfcd28ade Copter: thr failsafe will not RTL if in batt failsafe 
resolves issue #413
 2013-07-13 19:49:25 +09:00
Randy Mackay 5a40ee7a38 Copter: fix to gps present check in mavlink extended status 1 msg 2013-07-13 10:27:50 +09:00
Randy Mackay 66d7f7b026 Copter: GCS_mavlink only send waypoints to gcs3 if initialised 
Also Load parameter defaults at initialisation (although defaults are
all zero anyway so should have no effect)
 2013-07-13 10:12:01 +09:00
Randy Mackay aefb38e486 Copter: remove param to disable accel based throttle controller 2013-07-12 22:57:30 +09:00
Randy Mackay d5b4c44926 Copter: comment fix for flight mode switch delay const 2013-07-12 22:29:14 +09:00
Rayjan Wilson 07ca8ef87a attempt to change from 1/10th second to 2/10th second on flight mode switch 2013-07-12 21:57:35 +09:00
Randy Mackay 53bff2b63e Copter: cli to report ch8 radio values 2013-07-12 21:46:03 +09:00
Randy Mackay 2f4221391e Copter: set_dead_zone renamed to set_default_dead_zone 
Dead zones now set as part of rc initialisation instead of only after
eeprom is erased.
Change in use of parameter means value passed in should be 1/2 what it
was previously
 2013-07-12 11:44:23 +09:00
Randy Mackay 1685ff274d TradHeli: compile error fix related to new ACRO 
The motors_runup_complete must be a feature that Rob has implemented in
his clone which has not yet reached master.  We will need to restore
these lost few trad-heli specific lines once Rob's changes make it to
master.
 2013-07-11 22:33:55 +09:00
Leonard Hall 64ce9b017d Copter: Body frame ACRO upgrade 2013-07-11 17:53:25 +09:00
Randy Mackay 6dd446ac79 Copter: firmware version to 3.0.1 2013-07-11 16:45:05 +09:00
Andrew Tridgell 5ae62f4f04 Copter: fixed build with specified GPS driver 2013-07-11 14:27:42 +10:00
Randy Mackay ac5d925115 Copter: revert Loiter Pos P to 1.0 (was 0.8) 2013-07-11 12:20:31 +09:00
Randy Mackay 1590a5d58a Copter: increase Yaw Rate I 0.02 2013-07-11 12:20:29 +09:00
Randy Mackay ab1a7baf71 Copter: project stopping point for loiter command 2013-07-11 11:39:47 +09:00
Randy Mackay d77f7bc803 Copter: default Loiter Pos P to 0.8 (was 0.2) 2013-07-11 08:13:17 +09:00
Randy Mackay ec65764750 Copter: typo in release notes 2013-07-11 08:04:45 +09:00
Randy Mackay ab09dc46fb Copter: update release notes 2013-07-10 21:20:01 +09:00
Randy Mackay 345924ddec WPNav: replace LOITER_ACCEL_MAX with parameter 
Also removed unused _lean_angle_max variable
 2013-07-10 20:00:32 +09:00
Randy Mackay 8cb7bd628e Copter: change firmware version to 3.0.1-rc2 2013-07-10 15:52:21 +09:00
Randy Mackay f459d35e3e Copter: roll-pitch fix to allow I to reduce 
Contributed by Leonard Hall
 2013-07-10 15:52:15 +09:00
Andrew Tridgell da4137b731 Copter: changes for GPS field changes 2013-07-10 14:04:22 +10:00
Andrew Tridgell c544a076ca Copter: enable camera logging by default 
these messages only happen on user defined camera triggering, so
should be low rate
 2013-07-10 12:24:02 +10:00
Craig@3DR bbd4fbd2fb Copter: trigger + logging on camera update_location() 2013-07-10 08:39:59 +10:00
Tobias cf426fcb3e Copter: fixed a compiler warning 
* removed useless comparison: if (int8_t t >= 255) ...
* revealed by -Wtype-limits
* saved 6 bytes
 2013-07-08 14:53:30 +10:00
Randy Mackay ed3bf2c1e7 Copter: relax pre-arm checks for mag field 
previously it was 50% ~ 150% of expected mag field but now expanded to
35% ~ 165%.
 2013-07-07 18:00:36 -10:00
tobias 4e73cf810e Copter: added cast to remove compiler warning 2013-07-08 12:07:50 +10:00
Randy Mackay 45f47de98d Copter: reduce default Loiter Pos P to 0.2 (was 1.0) 2013-07-07 16:00:09 -10:00
Randy Mackay 9361e9fe32 Coper: compile error fix when FENCE disabled 2013-07-05 17:22:05 -10:00
Randy Mackay 227185fd0f Copter: remove constraint on rate yaw controller 2013-07-05 14:18:58 -10:00
Randy Mackay 40612ed551 Copter: yaw limit fix to allow I to reduce 
We now allow the I term even if we've hit the yaw limits as long as
updating the I term will reduce it
 2013-07-05 13:52:03 -10:00
Randy Mackay 0cf4ac088a Copter: restore LEDs to off state when auto-trim completes 2013-07-04 16:38:28 -10:00
Randy Mackay 79d2fe6271 Copter: double flash arming light when pre-arm checks fail 
Hardly my finest work but it's temporary because we're going to replace
all the led, buzzer etc with a library called AP_Notify in the near
future.
 2013-07-04 16:26:22 -10:00
tstellanova 459c47fa46 Fix test_ins 
Fix output format of test_ins and fix the number of parameters passed
to printf
 2013-07-02 23:42:48 -10:00
Randy Mackay 404cd5f3da Copter: rename g.pid_throttle to g.pid_throttle_rate 
Small code clean-up to make throttle rate controller's pid more obvious
 2013-06-30 00:04:21 -10:00
Randy Mackay b3da8a462f Copter: CH6 tuning definition clean-up 
Renamed and reorganised the CH6 #defines and parameter definitions
 2013-06-29 23:51:43 -10:00
Dr Gareth Owen e0dcd680f7 proposed radio failsafe bug fix 2013-06-27 17:13:01 -10:00
Randy Mackay 917ae883a0 Copter: revert prev changes to battery failsafe 
The battery failsafe should remain independent of any throttle failsafe
behaviour settings
 2013-06-27 10:30:46 -10:00
Robert Gayle 917edcab11 Copter: added FS_THR_ENABLED_ALWAYS_LAND (=3) option: don't attempt RTL, just land 2013-06-27 10:19:38 -10:00
Olivier-ADLER eaa0e36954 Copter: CompassMot current calibration 
Was using a hardcoded (330) value instead of COMPASS_MAGFIELD_EXPECTED define
 2013-06-26 20:54:03 -10:00
Jonathan Challinger b21bc5a85a Copter: Fixed bug in battery current integration 2013-06-26 17:22:37 +09:00
Randy Mackay 0592475959 Copter: change firmware version to 3.0.0-rc1 2013-06-26 14:03:28 +09:00
Randy Mackay cb0e262e24 Copter: GPS Failsafe switch to LAND if circular fence enabled 2013-06-26 11:57:59 +09:00
Randy Mackay 45dfbecaba Copter: update 3.0.1 version and release notes 2013-06-26 00:09:36 +09:00
Randy Mackay 022148ec0d Copter: LAND only control horizontal position if we have GPS lock 2013-06-25 22:34:58 +09:00
Randy Mackay 66cecbfdc3 Copter Fence: bug fix to avoid repeatedly invoking LAND mode 2013-06-25 22:23:31 +09:00
Olivier-ADLER 24e1f074d0 Copter: Fence missing GPS 3D fix check 
Fence was missing GPS 3D fix check before selecting recovery decision.
 2013-06-25 22:23:29 +09:00
Randy Mackay facd8fc89f Copter: calculate home position and bearing when we have 2D Fix 2013-06-25 22:23:26 +09:00
Olivier-ADLER f1bedc70ac Copter: SuperSimple mode bug 
SuperSimple bearing was updated without checking for GPS 3D Fix availability.
 2013-06-25 22:23:13 +09:00
Andrew Tridgell 3e82f644ea Copter: enabled CAM_TRIGG_DIST parameter 2013-06-25 12:52:44 +10:00
Andrew Tridgell 76d1791073 Copter: CONFIG_RELAY is not used 2013-06-25 12:47:07 +10:00
Andrew Tridgell 23eade8f74 Copter: enable RELAY_* parameters 2013-06-25 12:46:53 +10:00
Randy Mackay a48a7f9775 Copter: minor param definition unit changes 2013-06-23 15:52:46 +09:00
Randy Mackay cd30103b76 Copter: increase default CIRCLE_RATE to 20deg/sec 2013-06-19 12:40:33 +09:00
Randy Mackay 245bc3d3fd Copter: show pilot input in dataflash ATT message even when in AUTO 
AUTO mode ignores pilot input but we still want to be able to see the
pilot's input in the Roll-In and Pitch-In columns of the dataflash's ATT
message
 2013-06-19 12:37:13 +09:00
Randy Mackay acb4907313 Copter: update FS_THR_VALUE parameter description 
One user was setting FS_THR_VALUE too low, below 900 which means
ArduCopter would not trigger when the ppmencoder pulled ch3 low after
updates from the ppmencoder stopped
 2013-06-18 15:56:39 +09:00
Randy Mackay b1a014e12e Copter: update firmware version to 3.0.0 2013-06-18 10:03:40 +09:00
Randy Mackay c42ed1e5eb Copter: add @Increment to PID parameters descriptions 2013-06-16 21:53:50 +09:00
Randy Mackay 069bd17928 Copter: reduce default AltHold P to 1.0 (was 2.0) 
This helps reduce jumpiness due to althold feed forward
 2013-06-16 15:32:25 +09:00
Randy Mackay b1e089fe29 Copter: update AC3.0-rc6 version and release notes 2013-06-16 11:48:03 +09:00
Randy Mackay 272f0e5032 Copter: reduce twitch when entering CIRCLE mode 
Set loiter target and prev iterations velocity when circle mode is
started
Start circling from projected stopping point
 2013-06-15 18:18:30 +09:00
Andrew Tridgell 3ec381094e Copter: fix VOLT_DIVIDER docs 2013-06-07 08:40:37 +10:00
Andrew Tridgell 8703d39475 Copter: the INS object is needed for HIL_MODE_SENSORS 
otherwise we can't level, so can't arm
 2013-06-04 18:09:06 +10:00
Randy Mackay 181beb004d Copter: update AC3.0-rc5 release notes 2013-06-04 15:26:02 +09:00
Randy Mackay fcf2429e39 Copter: remove throttle controller's ability to limit lean angle 2013-06-04 15:25:59 +09:00
Randy Mackay dd92a2ba07 Copter: AC3.0-rc5 version and release notes 2013-06-04 15:25:56 +09:00
Andrew Tridgell ba959fd594 Copter: remove unused define 2013-06-04 10:36:34 +10:00
Randy Mackay 1b08f12d53 Circle: allow counter clockwise rotation 2013-06-03 22:12:56 +09:00
Randy Mackay 40f5226518 Copter: reset yaw angle only when motors not spinning 2013-06-03 22:12:52 +09:00
Andrew Tridgell 340c451caf Copter: fixed off-by-one in rcmapper 
oops ...
 2013-06-03 22:22:26 +10:00
Andrew Tridgell 595d3c694a Copter: make it possible to change board orientation at runtime 2013-06-03 16:52:52 +10:00
Andrew Tridgell 725293b9c3 Copter: removed use of rc_ch[] global array 2013-06-03 16:23:48 +10:00
Randy Mackay 213eaa8db6 Copter: integrate draft RCMapper 2013-06-03 16:23:47 +10:00
Randy Mackay 993bccc60e Copter: point nose at landing point if specified 2013-06-03 15:20:37 +09:00
Randy Mackay 9f59f2724f Copter: bug fix for take-off when throttle is zero 
Verify_takeoff was always returning false if throttle was zero.  The
pilot should be able to move their throttle back to zero immediately
after initiating the mission
 2013-06-03 14:18:56 +09:00
Randy Mackay 13c41e74f2 Copter: reduce pre-arm board voltage check to 4.3V 2013-06-02 20:47:58 +09:00
Randy Mackay 036e6f4f2c Copter: updated AC3-rc4 release notes 2013-06-02 12:21:06 +09:00
Randy Mackay 9e91def774 Copter: update firmware version and release notes 2013-06-02 12:19:36 +09:00
Olivier-ADLER 735406fa77 Copter : POSITION_HOLD mode -> allow user position control 2013-06-02 11:49:18 +09:00
Olivier-ADLER 68470c9176 Copter : Land submode - Check for GPS 3D Fix instead of checking for available home position 2013-06-02 11:49:12 +09:00
Dr Gareth Owen 18e566ccc5 failsafe gps lost bug fix 2013-06-02 11:41:59 +09:00
Randy Mackay b462bfed84 Copter: remove unused print_wp function 2013-06-02 11:32:38 +09:00
Dr Gareth Owen 4c6d6ea96e changed yaw reset to when armed to not use initial_simple_bearing 2013-06-02 11:29:30 +09:00
Dr Gareth Owen 79bd8b4fd0 rtl resets yaw to same as when armed - unless user specifies otherwise 2013-06-02 11:29:27 +09:00
Randy Mackay 0460147a15 Copter: guided mode yaw fix 
Nose of copter now points at next guided point if it is more than 10m
away
 2013-06-02 11:25:35 +09:00
Randy Mackay 5203ba9fe3 Copter: alt hold feed forward filter 2013-06-01 21:13:47 +09:00
Randy Mackay 99f5462a03 Copter: circle mode fixes 2013-06-01 18:21:30 +09:00
Randy Mackay e3cd494709 Copter: remove debug message 2013-06-01 18:21:30 +09:00
Randy Mackay 23ce35d292 Copter: remove unused NAV_WP_INAV #define 2013-06-01 18:21:28 +09:00
Randy Mackay 5e2fc32410 Copter: remove unused cli wp report 2013-05-31 21:04:27 +09:00
Randy Mackay 1722e438d8 Copter: pass alt hold gain to WP_Nav library 2013-05-31 21:04:10 +09:00
Randy Mackay d875e95da3 Copter: remove nav and wp tests from cli 
This are more fully tested in the autotester
 2013-05-31 15:23:39 +09:00
Randy Mackay ae91c4a237 Copter: alphabetise order of cli test menu 2013-05-31 15:16:06 +09:00
Randy Mackay e2495b7a49 Copter: alphabetise order of cli setup menu 2013-05-31 15:16:06 +09:00
Randy Mackay a0c8bf238e Copter: move motors test to test menu 
Also allow test to be run from mission planner's cli window
 2013-05-31 15:16:05 +09:00
Randy Mackay 1807840d4f Copter: fixed comments re mag field pre-arm check 2013-05-31 12:28:04 +09:00
Randy Mackay 7b50ecc73c Copter: pre-arm check for mag field length 2013-05-31 12:23:19 +09:00
Randy Mackay a1821c89e7 Copter: pre-arm check for board voltage < 5.8V 2013-05-31 11:31:27 +09:00
Randy Mackay c6e383be0f Copter: disable board voltage pre-arm check for PX4 2013-05-31 11:27:54 +09:00
Andrew Tridgell 2488c4fdc3 Copter: update docs on volt/current pin 2013-05-31 07:57:15 +10:00
Dr Gareth Owen f175111243 added GPS check before mode change. New mode_requires_gps() function. 2013-05-30 20:33:15 +09:00
Andrew Tridgell 0e31a2f582 Copter: fixed indent-tabs-mode 2013-05-30 09:55:51 +10:00
Andrew Tridgell 30df8796ce Copter: fixed loading of waypoints 
copter code assumes that command_total includes the home waypoint
 2013-05-29 21:44:08 +10:00
Andrew Tridgell 903d5636bb Copter: added support for partial mission load 
this allows individual waypoints to be updated in missions
 2013-05-29 16:25:05 +10:00
Randy Mackay c3d21a457f Copter: add pre-arm board voltage check 
Copter will not arm unless board voltage is over 4.5V
 2013-05-28 21:50:31 +09:00
Randy Mackay 6ecd2d74a3 Copter: beep twice during arming 2013-05-27 13:55:34 +09:00
Randy Mackay cdcf442f55 Copter: enable GPS failsafe by default 2013-05-27 11:25:37 +09:00
Randy Mackay ec7ee47099 Copter: scaling stability patch 2013-05-27 11:21:31 +09:00
Randy Mackay 838fb3f4e2 Copter: don't spin motors in ALTHOLD with zero throttle 2013-05-27 10:42:22 +09:00
Randy Mackay 4fa101292a Copter: add baro health to pre-arm checks 2013-05-25 12:24:47 +09:00
Randy Mackay d1791bab76 Copter: fix barometer cli test 2013-05-25 12:21:29 +09:00
Dr Gareth Owen 1aca66460e 7 yaw when armed option changed so overridable by user 2013-05-24 11:14:06 +09:00
Randy Mackay 967aa81e9b Copter: add XL-EZ4 to SONAR_TYPE parameter description 2013-05-23 09:46:57 +09:00
Randy Mackay 22e9b95c3c Copter: version update to 3.0.0-rc3 2013-05-22 17:46:28 +09:00
Randy Mackay 72f29bd0db Copter: remove debug message from compassmot 2013-05-22 11:30:30 +09:00
Randy Mackay c404c46e5a Copter: add Fence to CH7/CH8 param description 2013-05-21 16:31:16 +09:00
Andrew Tridgell 4508e645f1 Copter: fixed parameters to pass new script 2013-05-21 17:02:13 +10:00
Randy Mackay bb3073fab1 Copter: minor parameter description fixes 2013-05-21 15:56:09 +09:00
Randy Mackay 5ee68db6f0 TradHeli: add parameter descriptions 
small formatting changes too
 2013-05-21 15:33:41 +09:00
Randy Mackay 9139fb54ac Copter: param update for AP_Baro and AP_Scheduler 2013-05-21 14:22:11 +09:00
Randy Mackay 00bd1bf8ea Copter: RESETTOARMEDYAW order and comments 
We should keep the order in the case statement the same as the #define
order.
 2013-05-21 10:58:34 +09:00
Dr Gareth Owen f646b79e5f indent correct again 2013-05-21 10:40:36 +09:00
Dr Gareth Owen d9fc37c01c indent correct 2013-05-21 10:40:34 +09:00
Dr Gareth Owen e9d640ced8 added ch7 option to reset yaw back to what it was when quad was armed 2013-05-21 10:40:30 +09:00
Randy Mackay db552adf02 Copter: typo in LOG_BITMASK param description 2013-05-21 10:30:59 +09:00
Randy Mackay 669850e6d4 Copter: add parameter description for LOG_BITMASK 
Should allow a dropdown in the GCS so it can be set more easily without
going into the cli
 2013-05-21 10:29:40 +09:00
Randy Mackay bd44c2f73d Copter: all pre-arm checks to be disabled 
set ARMING_CHECK parameter to zero to disable
 2013-05-20 14:48:04 +09:00
Randy Mackay 43c377ca67 Copter: add compass calibration to pre-arm check 2013-05-20 14:19:47 +09:00
Randy Mackay 6efdabb104 Copter: move auto disarm into a separate function 2013-05-20 14:05:50 +09:00
Randy Mackay 1dbe98b566 Copter: display reason for pre-arm-check failures in GCS 2013-05-20 13:03:18 +09:00
Randy Mackay d10e3bc75f Copter: send_text_P bug fix for short messages 2013-05-20 12:52:20 +09:00
Randy Mackay 885ce7db03 Copter: remove DigitalReadFast 
With APHal all reads are fast
 2013-05-20 11:29:34 +09:00
Randy Mackay 21f3534a93 Copter: remove DigitalWriteFast 
With APHal all writes are fast
 2013-05-20 11:27:35 +09:00
Randy Mackay 55f1b3b2ae Copter: reorganise medium loop 
Shifted compass logging to happen when compass is read.
Updated comments.
 2013-05-20 11:18:51 +09:00
Randy Mackay c840e2a8c2 Copter: code clean-up move 10hz loop after 50hz loop 2013-05-20 11:05:14 +09:00
Randy Mackay f4846b417a Copter: compiler fix for disabled logs 2013-05-19 22:55:40 +09:00
Randy Mackay 4ad395e7be Copter: merge WPNAV into NTUN dataflash message 2013-05-19 22:53:35 +09:00
Randy Mackay 072f3dbe30 Copter: display interference % in compassmot 2013-05-19 22:03:48 +09:00
Randy Mackay 9fdab5e8fe Copter: remove unused AUTO_SLEW_RATE parameter 2013-05-17 16:09:17 +09:00
Randy Mackay 8c99936431 Copter: update CH7_OPT, CH8_OPT to include Multi Mode 2013-05-17 16:07:11 +09:00
Randy Mackay 38239c652a Copter: ch8 aux switch 
Ch8 can be used as an aux switch like ch7.  Has all the same options as
ch7 and there is a safety check to ensure both switches aren't set to
the same function so as to avoid interfering with each other
 2013-05-17 14:42:28 +09:00
Randy Mackay 566daf883a Copter: remove unused MODE bit from LOG_BITMASK 
We always log the mode so no need for this bit
 2013-05-17 12:26:42 +09:00
Randy Mackay 5b00ce24ed Copter: minor user hooks cleanup 
Only define and call functions if the appropriate #define in
APM_Config.h has been added
 2013-05-17 12:19:07 +09:00
Randy Mackay 6a173eb7ad Copter: remove unused dump_state function 
Feel free to add this back in when doing debug.  Let's not have too much
debug permanently in the code because it makes it harder to read.
 2013-05-17 12:11:23 +09:00
Randy Mackay 1426f40319 Copter: remove unused JDrones motor PID overrides 2013-05-17 12:05:20 +09:00
Randy Mackay 19394918dd Copter: simplify APM_Config.h 
Remove items that can be more easily set with parameters
 2013-05-17 12:01:39 +09:00
Randy Mackay 28c37dd798 Copter: do pre-arm checks when arming from GCS 2013-05-17 11:22:32 +09:00
Randy Mackay 9d0f40b432 Copter: add pre_arm_rc_check 
Motors are not be enabled unless we have passed rc checks which include
checking the radio in calibration has been performed.
 2013-05-16 16:32:00 +09:00
Randy Mackay 0540acfec9 Copter: change to compassmot instructions 2013-05-15 12:35:16 +09:00
Randy Mackay 33d1129904 Copter: remove unused TB_RATIO parameter 2013-05-14 16:56:55 +09:00
Randy Mackay e843bf3dfd Copter: bug fix for POSITION mode throttle 
Was using alt-hold throttle controller instead of manual throttle
controller
 2013-05-14 11:56:09 +09:00
Randy Mackay a2e298bbfc Copter: change to default RTL yaw behaviour 
We will not point the nose home for RTL but will point the nose for all
other waypoints
 2013-05-14 11:52:39 +09:00
Randy Mackay 319f3ef560 Copter: flexible CH6 declination tuning range 2013-05-13 23:37:30 +09:00
Randy Mackay 6ba9431be4 Copter: update firmware version and release notes ahead of -rc2 2013-05-13 22:16:25 +09:00
Randy Mackay e130c8041c Copter: remove unused event definitions 2013-05-13 18:07:44 +09:00
Randy Mackay bd6edecdec Copter: restore logging of arm/disarm event 2013-05-13 18:07:28 +09:00
Randy Mackay 94a05a9285 Merge branch 'master' of https://github.com/diydrones/ardupilot 2013-05-13 18:01:53 +09:00
Randy Mackay bb7aec2600 Copter: log compass failur to dataflash 2013-05-13 18:01:30 +09:00
Andrew Tridgell c44fd42349 Copter: fixed RSSI reading on PX4 
needed for different analog input scaling
 2013-05-13 15:19:05 +10:00
Randy Mackay 429f900460 Copter: bug fix for RTL bearing 
Also smooth RTL's initial climb stage by projecting stopping point
 2013-05-11 16:21:25 +09:00
Randy Mackay ad656c7e8a Copter: allow lat/lon to be specified for land 2013-05-10 22:37:15 +09:00
Randy Mackay b3bca271d4 Copter: rename verify_must to verify_nav_command 
Perhaps easier to understand if we use the "nav" and "conditional"
command labels
 2013-05-10 12:06:29 +09:00
Randy Mackay b65d714675 Copter: set yaw-mode in do_loiter mission command 2013-05-10 10:51:46 +09:00
Randy Mackay 98732ae4e8 Copter: remove redundant init of controllers when auto is started 
individual do_* commands are responsible for setting roll-pitch, yaw and
throttle modes.  Removing this redundant setting of the controllers
removes the short period (10th second max) where loiter and waypoint
controller's desired roll and pitch were used even before the
controllers have been run once.
 2013-05-10 10:51:13 +09:00
Randy Mackay 870b9b0fbb Copter: only run nav controllers when auto-armed 
This stops run-up in target position and nav controller I terms ahead of
throttle being raised
 2013-05-10 10:46:17 +09:00
Randy Mackay 1b52ee211a Copter: bug fix for RTL yaw control 
Nose was only pointing home if your initial altitude was above the
RTL_ALT
 2013-05-09 21:44:46 +09:00
Randy Mackay ed5ddfd9db WPNav: initialise desired roll, pitch 
bug-fix to resolve 1/10th second twitch when loiter or waypoint
controller are first engaged
 2013-05-09 18:32:02 +09:00
Randy Mackay d0fb332e9f Copter: init_rc_out in cli's compassmot setup 
Bug fix to allow cli's compass motor compensation to be run from the
mission planner's terminal window
 2013-05-09 13:30:08 +09:00
Andrew Tridgell 95120ed43d Copter: use library gcs_severity 2013-05-09 09:28:49 +10:00
Randy Mackay 1b2d8636ca Copter: set wp to "fast" if they have no delay 2013-05-09 00:18:36 +09:00
Randy Mackay 9824f6c223 Copter: add flight mode strings to Parameter info 2013-05-08 16:41:45 +09:00
Randy Mackay 0a148cce19 Copter: log target alt in meters 2013-05-08 16:41:16 +09:00
Andrew Tridgell 9feb46c834 Copter: use new accel cal interact over MAVLink 2013-05-08 16:19:26 +10:00
Randy Mackay 324200b52c Copter: disable centrifugal correction when disarmed 2013-05-06 15:32:08 +09:00
Andrew Tridgell 703a1ba438 Copter: avoid copying the DCM matrix 2013-05-05 21:51:09 +10:00
Randy Mackay 372ebb602c Copter: disable centrifugal force correction when disarmed 2013-05-05 16:55:06 +09:00
Randy Mackay ae2ad8e819 Copter: remove unused radius_of_earth constant 2013-05-05 13:13:48 +09:00
Randy Mackay 6836964e3c Copter: resolve compiler warning re fence 2013-05-04 23:18:16 +09:00
Randy Mackay 1cfd5900a8 Copter: add support for H-quad frame 
H-quads are like X quads but the motors spin in the opposite direction.
Having the motors reversed seems to help with yaw authority because of
the slight flex in bodies
 2013-05-03 23:13:40 +09:00
Randy Mackay 647a93e78e Copter: remove jerk when entering RTL or AUTO 
Loiter target position was not being initialised properly.
Add a few more comments
 2013-05-03 16:58:00 +09:00
Randy Mackay cca05ee8ae Copter: start dataflash logging when arming 
Stop nearly empty logs from being produced.
Removed redundant armed bit from ap state.
 2013-05-03 14:49:55 +09:00
Andrew Tridgell b6e3e59bc3 Copter: simplify setHIL for baro 2013-05-02 15:26:54 +10:00
Andrew Tridgell 55da049c69 Copter: fixes for AP_Baro_HIL 2013-05-02 15:09:16 +10:00
Andrew Tridgell db57c8d7c5 Copter: removed the deprecated HIL sensors interface 
must use the new HIL_STATE message now
 2013-05-02 15:00:50 +10:00
Andrew Tridgell 172d9724df Copter: use new HIL compass API 2013-05-02 15:00:07 +10:00
Andrew Tridgell 0d027b7a23 Copter: updates for new compass API 2013-05-02 12:48:14 +10:00
Andrew Tridgell 105bd32a2e Copter: fixed some uses of constrain_float() to be right type 2013-05-02 10:29:57 +10:00
Andrew Tridgell 25c576cad7 Copter: replaced constrain() with constrain_float() 2013-05-02 10:26:49 +10:00
Michael Oborne 743d7f2b74 Fix Param description 2013-05-02 09:49:21 +10:00
Randy Mackay d9601916ee Copter: update firmware version and release notes for 3.0.0-rc1 2013-05-01 17:53:11 +09:00
Randy Mackay 3aca35777f Copter: use mavlink fence message 
Note: we should consider moving this send via mavlink into the fence
library
 2013-05-01 17:06:58 +09:00
Randy Mackay bab9fa25e5 Copter: add GCS failsafe 2013-04-29 21:30:22 +09:00
Randy Mackay 31e430948a Copter: use renamed RCInput valid_channels 2013-04-29 15:06:30 +09:00
Randy Mackay 76d0f7f74d Copter: fix compiler warning re unused float_int 2013-04-28 17:22:58 +09:00
Randy Mackay cc2232b2f3 Copter: remove outdated tests 
We primarily use sitl now for testing making these unit tests less
important and having large blocks of commented out code that perhaps
doesn't compile anymore makes the code messy
 2013-04-28 17:21:33 +09:00
Randy Mackay d146d6aaa6 Copter: restore update_altitude to run at 10hz 2013-04-28 17:15:13 +09:00
Randy Mackay 90af3262c5 Copter: pre-arm check for compass 2013-04-27 23:50:40 +09:00
Randy Mackay 57731bb3f9 Copter: adopt compass test from arduplane 2013-04-27 23:33:04 +09:00
Randy Mackay c232d7af4b Copter: correct fence parameter 2013-04-27 11:14:11 +09:00
Randy Mackay 58d1da2d80 Copter: integrate AC_Fence in place of limits 
Lesser functionality than limits but saves more than 150 bytes and it
works
 2013-04-27 11:14:07 +09:00
Randy Mackay 45aab0de92 Copter: add I2C error count to PM message 2013-04-26 22:39:22 +09:00
Andrew Tridgell 300a8d2bbc Copter: support all 12 channels on PX4 
last 4 channels are on the FMU pins
 2013-04-25 20:10:53 +10:00
Randy Mackay 74dca6da22 Copter: move update_commands to run_autopilot fn 
update_commands was being run in the medium_loop counter but it is
easier to understand the flow of the code if it is consolidated along
with other autopilot calls.
 2013-04-24 20:59:49 +09:00
Andrew Tridgell fb0f5d46ba Copter: use BIT_IF_SET() 
this should fix the problem with simple mode on PX4

Pair-Programmed-With: Randy Mackay <rmackay9@yahoo.com>
 2013-04-23 23:05:42 +10:00
Andrew Tridgell 5ad9deecfb Copter: cleanup some bit if tests to be clearer 
Pair-Programmed-With: Randy Mackay <rmackay9@yahoo.com>
 2013-04-23 23:03:34 +10:00
Andrew Tridgell 8ec1eaa8b1 build: removed obsolete cmake rules 
these have not been maintained for over a year
 2013-04-23 11:07:53 +10:00
Randy Mackay 63a48f76e2 Copter: add pre-arm check of radio and accel 
Only checks throttle channel and accelerometer scaling
 2013-04-23 00:01:20 +09:00
Randy Mackay 07b6efafd8 Copter: use DEGX100 constant for position_vector calcs 2013-04-22 21:03:46 +09:00
Randy Mackay 0b29754920 Copter: simplify roll-pitch stabilize controller 
remove check of whether to freeze i term when attitude is less than 5
degrees from horizontal.  I terms have been moved to the rate
controllers.
 2013-04-22 18:47:56 +09:00
Andrew Tridgell 82c604dd67 Copter: more constrain fixes 2013-04-22 13:26:49 +10:00
Andrew Tridgell d5875676b1 Copter: use a reference to DCM matrix 2013-04-22 13:26:49 +10:00
Andrew Tridgell c2c037ec0d Copter: use the right constrain() type in Attitude code 
Pair-Programmed-With: Randy Mackay <rmackay9@yahoo.com>
 2013-04-22 13:26:49 +10:00
Randy Mackay a9da3c9d3d Copter: remove unused throttle functions 
removed get_pilot_desired_acceleration vand get_pilot_desired_direct_alt
were used for initial testing of the inertial alt-hold controller but
are no longer required.
 2013-04-21 23:43:04 +09:00
Andrew Tridgell 9cec664236 Copter: fixed format of PM message log 2013-04-21 23:46:35 +10:00
Randy Mackay 94d4ecef11 Copter: reduce throttle rate D to zero 2013-04-21 16:28:07 +09:00
Randy Mackay 2fc25da4c3 Copter: Leonard's fix for get_loiter_accel_to_lean_angle 2013-04-21 16:27:50 +09:00
Andrew Tridgell c53ede506d Copter: make if statement clearer 2013-04-21 07:25:52 +10:00
Bill Bonney 36041bb9ff Copter: Enable CURRENT logging by default to dataflash 2013-04-21 07:25:34 +10:00
Andrew Tridgell 8b31f276a2 Copter: switch to block based logs for SITL 2013-04-20 20:45:51 +10:00
Randy Mackay 745df9b13c Copter: add SONAR_GAIN to tune reaction to sonar 
Some users report the response to sonar is too violent, this allows that
reaction to be reduced
 2013-04-20 15:58:36 +09:00
Randy Mackay 50515e28e1 Copter: replace fabs with fabsf 2013-04-20 15:40:56 +09:00
Randy Mackay a53e5f747b Copter: add fourth yaw behaviour, look-at-home 
Added get_wp_yaw_mode to remove duplication of checks of the
WP_YAW_BEHAVIOR parameter
 2013-04-20 15:36:24 +09:00
Andrew Tridgell 02c3083f60 Copter: print flight mode as string 2013-04-20 15:18:22 +10:00
Andrew Tridgell ce3ee97e73 Copter: removed duplicate print_latlon() declarations 2013-04-20 13:57:45 +10:00
Andrew Tridgell 93d075404c Copter: added board voltage to current message 2013-04-20 13:52:37 +10:00
Andrew Tridgell a0708460a4 Copter: convert to new logging system 2013-04-20 13:52:37 +10:00
Andrew Tridgell 67484a2ea1 Copter: make copter code compatible with the new logging system 
not fully converted yet
 2013-04-20 13:52:36 +10:00
Randy Mackay 37abfdc65a Copter: make CIRCLE_RATE a tunable parameter 
Also bug fix to check of how many time it has rotated during a loiter
turns mission command
 2013-04-20 12:03:55 +09:00
Randy Mackay d65d7d95e2 Copter: bug fix for take-off so it never descends 
If copter was already flying when take-off command was received it could
descend to the target altitude if it was below the current altitude.
 2013-04-18 22:30:24 +09:00
Randy Mackay 0fc9c8739e Copter: add WP_YAW_BEHAVE parameter 
Allows user to control whether nose points towards next waypoint and/or
home when RTLing.
Replaces YAW_OVR_BEHAVE which had a very similar purpose.  Almost nobody
ever knew about or used this parameter.
 2013-04-18 15:30:18 +09:00
Randy Mackay 18c1373847 Copter: remove unused AUTO_VELZ defaults 
These have now moved to AC_WPNav
 2013-04-18 14:57:08 +09:00
Randy Mackay f5955d8915 Copter: auto climb and descent params removed 
These params now reside in the AC_WPNav library
 2013-04-18 14:52:21 +09:00
Randy Mackay 9b351feade Copter: shorted INAV dataflash log message length 
Velocities are now output in WPNav message
 2013-04-17 22:39:30 +09:00
Randy Mackay f7524e5741 Copter: remove unnecessary cast to float in Log 2013-04-17 22:35:02 +09:00
Randy Mackay 7c8527e6a6 Copter: resolve compiler warning 2013-04-17 22:14:47 +09:00
Randy Mackay 2b4a7d60a9 Copter: remove unused throttle modes 
These were useful for testing the alt-hold when it was first introduced
but now they just add complexity
 2013-04-17 22:14:22 +09:00
Randy Mackay 56809a9df2 Copter: remove unused nav_ok and alt_sensor_flag 2013-04-17 21:57:57 +09:00
Randy Mackay 0b808abbed Copter: remove unused waypoint_valid function 2013-04-17 21:28:43 +09:00
Randy Mackay d2bd818b2d Copter: bug fix for auto_armed logic 
Zero throttle when switching into an auto flight mode would cause the
motors to stop.
 2013-04-17 21:28:42 +09:00
Andrew Tridgell 501eb4f0b4 Copter: made more variables static 2013-04-17 21:35:11 +10:00
Andrew Tridgell 61c2befd4d Copter: fixed logging for new API 2013-04-17 21:34:42 +10:00
Randy Mackay 82989d85f2 Copter: remove unused #defines 2013-04-16 22:34:12 +09:00
Randy Mackay 0663da7c9e Copter: loiter rate IMAX to 4m/s/s and D to zero 2013-04-16 22:28:18 +09:00
Randy Mackay b8974dec99 Copter: compass learn off by default 2013-04-16 18:47:39 +09:00
Randy Mackay a7b32caf72 Copter: bug fix for loiter_time check 
loiter_time_max was changed to hold the loiter time in seconds
(previously it was milliseconds) in order to allow the delay to be more
than 65 seconds but the verify_loiter_time check was missed from that
change
 2013-04-15 23:57:22 +09:00
Randy Mackay a185fa950c Copter: Jason's fix to auto disarming 
Added check so that it only starts counting down when motors are armed.
This removes the issue in which the copter sometimes disarms shortly
aftering being armed.
 2013-04-15 23:36:45 +09:00
Randy Mackay 8fe3e689f4 Copter: add WPNAV log message 2013-04-15 21:54:29 +09:00
Randy Mackay b48864e1ad Copter: allow CH6 tuning of compass declination 2013-04-15 21:50:44 +09:00
Andrew Tridgell cf6ae4a746 Copter: remove ahrs.set_barometer() 2013-04-15 10:52:32 +10:00
Randy Mackay 8c7a1597dc Copter: remove debug comment from RTL 2013-04-14 18:28:13 +09:00
Randy Mackay 629d23b7e2 Copter: remove WP_SPEED and WP_RADIUS parameters 
AC_WPNav library has equivalent params with very similar names
 2013-04-14 13:27:37 +09:00
Randy Mackay b58c26bcd5 Copter: remove pid_nav_lat, pid_nav_lon 2013-04-14 12:12:51 +09:00
Randy Mackay bffe4fa412 Copter: remove NAV_LAT and NAV_LON 
Loiter and navigation controllers now combined
 2013-04-14 12:09:45 +09:00
Randy Mackay 700fb1b179 Copter: replace sin_yaw_y, cos_yaw_x in circle mode 2013-04-14 10:39:30 +09:00
Randy Mackay 366616e32c Copter: reduce default loiter PIDs 2013-04-14 10:39:28 +09:00
Randy Mackay 1ee825ee9a Copter: move alt and wp checking to AC_WPNAV 
RTL fix so that if it starts rtl-ing from above 80m it returns home
while descending instead of descending at initial position.
add get and set_target_alt_for_reporting
 2013-04-14 10:39:23 +09:00
Randy Mackay 2db8365c90 Copter: add AC_WPNav to parameters list 2013-04-14 10:39:02 +09:00
Randy Mackay bc87118062 AC_WPNav: add get_target_alt method 2013-04-14 10:39:00 +09:00
Randy Mackay 6dbcbdcb43 AC_WPNav: limit max loiter position error 
move interpretation of pilot input to wpnav lib
 2013-04-14 10:38:58 +09:00
Randy Mackay 7c559333f5 Copter: get_throttle_rate's target_speed a float 2013-04-14 10:38:51 +09:00
Randy Mackay 926c404994 AC_WPNav: Leonard's loiter target smoothing 2013-04-14 10:38:39 +09:00
Randy Mackay ee7f40cfe9 Copter: Leonard's alt-hold feed forward 2013-04-14 10:38:37 +09:00
Randy Mackay f82ce449d7 AC_WPNav: add angle limits and set from AC's throttle controller 2013-04-14 10:38:34 +09:00
Randy Mackay 553f40a99c Copter: bug fix to loiter delay 
change delay to seconds to allow delays longer than 65seconds
 2013-04-14 10:38:30 +09:00
Randy Mackay a65960a009 Copter: use velocity based set_loiter_target 2013-04-14 10:38:28 +09:00
Randy Mackay e592baae11 Copter: remove remnants of fast_corner 2013-04-14 10:38:20 +09:00
Randy Mackay 4de5f67a91 Copter: replace wp_nav.get_target_alt with get_destination_alt 2013-04-14 10:38:17 +09:00
Randy Mackay 5b93990e41 Copter: removed next_WP 
Use the wp_nav.get_target_alt or controller_desired_alt in it's place
 2013-04-14 10:38:07 +09:00
Randy Mackay 1516972eaa Copter: add panorama to CIRCLE mode 
Yaw will slowly rotate if CIRCLE_RADIUS is set to zero
Circle center is projected forward CIRCLE_RADIUS from current position
and heading
 2013-04-14 10:38:01 +09:00
Randy Mackay 58ed8cd544 Copter: replace set_next_WP with direct call to wp_nav 2013-04-14 10:37:55 +09:00
Randy Mackay 49828eba7d Copter: integrate AC_WPNav 2013-04-14 10:37:48 +09:00
Randy Mackay cdb532a594 Copter: bug fix for loiter target 2013-04-11 18:24:20 +09:00
Randy Mackay e637a8fb29 Copter: remove old commented out code from setup.pde 2013-04-11 10:12:21 +09:00
tobias 217b8d7a59 cleanup: use const for struct Location pointers and references 
this allows the compiler to generate more efficient code
 2013-04-09 12:10:32 +10:00
Randy Mackay 9036b97a16 Copter: fix build error 
Removed last print_test_disabled call
 2013-04-05 23:03:17 +09:00
Randy Mackay fc0c451b69 Copter: remove #ifdef checks for Atmega1280 2013-04-05 22:48:10 +09:00
Randy Mackay 1dcd46bffc Copter: reduce compiler warnings 2013-04-05 22:25:58 +09:00
Randy Mackay 95d944f610 Copter: Jason's bug fix for loiter's set_next_WP_latlon 2013-04-05 13:46:07 +09:00
Randy Mackay 777c6a308e AP_InertialNav: use shared GRAVITY_MSS constant 2013-04-05 11:48:41 +09:00
Randy Mackay d1afd2fb9b Copter: make guided mode start at current location 2013-04-03 23:06:46 +09:00
Randy Mackay 0be23c8090 Copter: fix THR_ALT_P documentation 2013-04-03 22:38:34 +09:00
Randy Mackay 3bf847f675 Copter: Jason's faster cos_yaw, sin_yaw 2013-04-02 15:50:29 +09:00
Randy Mackay 40f6416b3d Copter: update Log_Read_Compass comment 2013-04-02 11:02:14 +09:00
Randy Mackay 7cf2255822 Copter LEDs: replace bitRead with bitmask 
Consolidate all checks of led_mode to leds.pde
Add #defines for bitmasks comparisons
Some formatting changes
 2013-04-01 13:10:12 +09:00
Randy Mackay a9eb626cb8 Copter: update default Rate Yaw P to 0.20 (was 0.25) 2013-04-01 11:49:50 +09:00
Randy Mackay 7ccb14344c Copter: update version to 2.9.1b-dev 2013-04-01 11:47:56 +09:00
Randy Mackay 7d4eea271f Copter: update Release notes again for 2.9.1b release 
Missed item re increasing max inav accel correction to 3 m/s
 2013-04-01 11:46:42 +09:00
Randy Mackay 49e3e040b6 Copter: update Release notes ahead of 2.9.1b release 2013-04-01 11:46:37 +09:00
Randy Mackay 24dd167607 Copter: ACRO bug fix from Jason 2013-04-01 11:44:28 +09:00
Michael Oborne 541fa13291 cleanup comments 2013-03-31 17:14:54 +08:00
Michael Oborne e80f2c094e HIL fix location, alt, mag from hil state message 2013-03-31 16:42:16 +08:00
Michael Oborne 59f80410d5 Add ability to compile sensor hil with sitl 2013-03-31 16:35:23 +08:00
Andrew Tridgell b280857025 Copter: use common angle wrap code 2013-03-29 13:14:31 +11:00
Randy Mackay f7d977fe37 Copter: add support for GPS fix type 2D 2013-03-27 11:41:47 +09:00
Andrew Tridgell b955aed976 Copter: fixed GPS test (detection of uBlox needs 10Hz poll) 2013-03-21 22:45:07 +11:00
Andrew Tridgell d22a7c64c9 Copter: only enter CLI is link is idle when 3 enters are hit 
this will prevent binary contents of RADIO packets being interpreted
as CLI enter line-feeds
 2013-03-21 21:56:02 +11:00
Andrew Tridgell ce8313e8fb Copter: only allow CLI within 20s of startup and when motors not armed 2013-03-21 17:34:11 +11:00
Randy Mackay 80bd593814 Copter: disarm motors when entering CLI 2013-03-21 12:07:00 +09:00
Randy Mackay dcf21eee8f Copter: only allow entering the CLI within 30 seconds of start-up 2013-03-21 11:54:04 +09:00
Andrew Tridgell ae96c77add Copter: added shell command in CLI test menu 2013-03-20 12:35:50 +11:00
Randy Mackay 38e81adae0 InertialNav: remove unnecessary "virtual" from function definitions 
This saves about 30bytes of RAM
 2013-03-19 17:51:16 +09:00
Randy Mackay a17421da27 Copter: scale HIL accels consistently with Plane code 2013-03-19 15:07:15 +09:00
Randy Mackay b4b9d80c2f Copter: bug fix to accept HIL accel values correctly 2013-03-19 11:33:58 +09:00
John Stäck 46a831fc03 Copter: add parameter "set" and "show" commands to setup menu. 
Squashed commit of the following:

commit 4243a0bb89de2f850606c623aac6a5b583c333ae
Author: John Stack <stack@spotify.com>
Date:   Thu Mar 7 09:28:16 2013 +0100

    Undo change to system.pde, not needed.

commit dae2dbbbd6e13621fccc1d0a221aae8d83240417
Author: John Stack <stack@spotify.com>
Date:   Wed Mar 6 22:47:50 2013 +0100

    Remove leftover bits of old menu setup

commit ccefc8fe0d237364b06a1478348f8552720d7598
Author: John Stack <stack@spotify.com>
Date:   Wed Mar 6 22:40:30 2013 +0100

    Roll the param menu into setup.

commit c61dad17bf32a3080d8eca2389c6e25f98767545
Author: John Stack <stack@spotify.com>
Date:   Wed Mar 6 08:08:42 2013 +0100

    Make the param menu a compile-time option, by defining PARAM_MENU

commit 0f35c4e88ec7aba5035b4880e9994e4783da75a9
Author: John Stack <stack@spotify.com>
Date:   Wed Mar 6 07:57:22 2013 +0100

    Use find(), which works well.

commit 3b81b29597fcee49193330d7b6d3f3aed99a476c
Author: John Stack <stack@spotify.com>
Date:   Tue Mar 5 07:57:33 2013 +0100

    Whitespace fixes

commit 6b9ccc5fe1de1e40a24eb9ff89006b9bd80e3662
Author: John Stack <stack@spotify.com>
Date:   Tue Mar 5 07:28:20 2013 +0100

    Add cli menu to change any parameter.
 2013-03-18 15:49:41 +09:00
Andrew Tridgell 952c56e990 Copter: fixed barometer init in HIL sensors mode 2013-03-18 16:20:25 +11:00
Andrew Tridgell ac06b5e62d Copter: remove unused function 2013-03-18 16:20:25 +11:00
Randy Mackay 36834e77b5 Copter: remove support for CLI Slider 2013-03-18 14:07:04 +09:00
Randy Mackay 597a4b912a Copter: fix to allow building HIL_MODE_SENSORS 2013-03-18 13:41:52 +09:00
Randy Mackay d1344e8c39 Copter: remove #define for CROSSTRACK_GAIN 
Note: the cross track is still calculated inside the inertial nav based
loiter and wp controls but it's no longer requires a tunable parameter
 2013-03-17 16:56:18 +09:00
Randy Mackay 1b6fcad90a Copter: remove tilt compensation parameter 
Note: this idea of feed forward tilt compensation is being incorporated
into the inertial nav based loiter and wp controllers but does not
require a separate tunable parameter
 2013-03-17 16:53:32 +09:00
Randy Mackay 61e29173e3 Copter: remove unused crosstrack variables and parameters 
Cross track is still calculated internally to the wpnav controller so we
should move this to a library and still report it to the ground station
 2013-03-17 16:46:31 +09:00
Randy Mackay a1295c042b Copter: fix init of wp_verify_byte so wp alt is always required 2013-03-17 16:37:30 +09:00
Randy Mackay fdcb78ccf7 Copter: leonard's smoother alt-hold transition 
Target altitude when entering alt-hold is based on a projection from
current alt and climb rate
 2013-03-17 13:24:49 +09:00
Randy Mackay 37040adfaa Copter: bug fix for auto missions over 320m 
get_throttle_althold_with_slew's target_alt parameter defined as int16_t
(instead of int32_t) meaning missions with altitudes >320m could wrap
around and become negative.
 2013-03-17 11:14:35 +09:00
Randy Mackay 150046f2b8 Copter: GPS Failsafe implemented 
Switches to LAND mode 5 seconds after losing GPS if you're in a flight
mode that requires a GPS
 2013-03-16 17:27:46 +09:00
Randy Mackay f9539384a1 Copter: rename failsafe to failsafe_radio 
Makes way for separation of failsafes for throttle, gps and gcs
 2013-03-16 17:14:21 +09:00
Randy Mackay f263e81ed7 Copter: remove unused GPS and baro filters 
Saves 24bytes of RAM
Removing the baro filter leads to noisier Baro Alt appearing in the log
so we should make the inertial nav altitude appear in the CTUN message
 2013-03-16 00:20:15 +09:00
Randy Mackay 5380973225 Copter: only start delay timer after reaching wp location and altitude 2013-03-06 12:50:41 +09:00
Randy Mackay a73f50494c TradHeli: remove duplicate RC_FAST_SPEED definition 2013-03-04 23:45:23 +09:00
Randy Mackay cb6ffc7acf Copter: minor formatting fix for report_ins 2013-03-04 23:14:14 +09:00
Randy Mackay 998511f506 Copter: use unsigned long for dataflash log for gps time 
Updated some formatting of comments in the same file
 2013-03-04 23:13:06 +09:00
Randy Mackay 33bd984a91 Copter: remove unused input_voltage parameter 2013-03-03 23:23:54 +09:00
Randy Mackay cb84ec9d9b Copter: add current based compass compensation 2013-03-03 23:02:36 +09:00
Andrew Tridgell c2fd1512ff Copter: use voltage_average() so as to avoid INPUT_VOLTS 2013-03-03 16:16:01 +11:00
Randy Mackay 0d5e731a65 Copter: add compassmot to cli 
Allows user to setup compensation for motor's interference on the
compass
 2013-03-02 17:54:18 +09:00
Randy Mackay 476a6d0164 Copter: fix for acro throttle bug 2013-03-02 10:28:44 +09:00
Randy Mackay 6b2b69535f Copter: Compass log stores/retrieves motor offsets 2013-03-02 00:03:20 +09:00
Randy Mackay d8515ff85e Compass: basic compensation for motor interference 2013-03-02 00:03:16 +09:00
Andrew Tridgell 637ecd5279 Copter: updates for new dataflash API 2013-03-01 07:18:26 +11:00
Andrew Tridgell 9a3bd17cfb Copter: fixes for new DataFlash API 2013-03-01 07:18:25 +11:00
Randy Mackay e0506bd622 Copter: inav circle initial implementation 2013-02-26 11:35:35 +09:00
Randy Mackay c8f09ac219 Copter: fix compile error for PX4 re Compass logging 2013-02-25 13:26:58 +09:00
Randy Mackay d6ff5ae261 Copter: add roll-pitch slew for auto modes 
Added reporting of roll, pitch inputs for ACRO, AUTO
 2013-02-24 14:42:04 +09:00
Randy Mackay e297ba7d18 Copter: update default loiter gains for inertial nav 2013-02-24 14:42:00 +09:00
Randy Mackay 102b5da59d Copter: remove unnecessary #defines from APM_Config.h 2013-02-24 14:41:56 +09:00
Randy Mackay cbde042ec5 Copter: remove non-inav loiter and wp controllers 
lon_speed, lat_speed changed to float
do_takeoff, do_land now set roll-pitch, yaw and nav modes specifically
removed fast_corners functionality (may need to be reimplemented with
new inertial nav controllers)
 2013-02-24 14:41:52 +09:00
Randy Mackay 609676e26c Copter: add logging of compass values 
Removed rarely used ITERM because we didn't have enough bits in the log
mask
 2013-02-24 14:41:48 +09:00
Randy Mackay 6f27bc7ae5 Copter: remove filters from inav loiter 2013-02-24 14:41:44 +09:00
Randy Mackay 1410063a14 Copter: new ROLL_PITCH_WP_INAV roll-pitch mode 
small corrections to allow waypoints to work with new inertial nav wp
controller
 2013-02-24 14:41:40 +09:00
Randy Mackay 574756908d Copter: set wpinav controller targets in nav calls 
All navigation commands now properly set wpinav controller targets
except CIRCLE related commands.
 2013-02-24 14:41:36 +09:00
Randy Mackay 00bc28adcc Copter: take-off code cleanup 
remove redundant setting of loiter target.
explicitely set throttle mode to THROTTLE_AUTO
 2013-02-24 14:41:32 +09:00
Randy Mackay 67c69a19ee Copter: remove baro-only alt hold 
Saves 8 bytes of memory and more importantly simplifies the alt hold
calculations
 2013-02-24 14:41:29 +09:00
Randy Mackay 37d3e1d7e4 Copter: add zero slope checks to wpinav 
also added RTL fix to set wpinav target explicitly
 2013-02-24 14:41:25 +09:00
Randy Mackay b74da54c98 Copter: enable inav xy by default 2013-02-24 14:41:21 +09:00
Randy Mackay 53ab1d5d9b Copter: add advance track call to actually move towards waypoint 
Also added unrelated check that waypoint is valid before updating
waypoint distance.
 2013-02-24 14:41:17 +09:00
Randy Mackay 766ccdf6f8 Copter: add selection of inertial nav wp controller to APM_Config.h 2013-02-24 14:41:13 +09:00
Randy Mackay fcf102b2cf Copter: inertial nav waypoint controller 
#define added to allow compile time selection of traditional or inav
based loiter and wp controllers
 2013-02-24 14:41:09 +09:00
Jason Short 4c3ee76900 AC: Moving flip speed back to 400°/s to prevent oscillation around change in speed. 
Would like to add a more gradual speed change in the finish. Might require a new state as the copter passes -90°
 2013-02-23 13:14:15 +09:00
Jason Short 7d5b975da2 AC: Flip code fix 
Flight tested it today and made some flips. Throttle adjusted in Manual throttle modes. Not tested in AP throttle modes such as alt hold.
 2013-02-23 13:14:11 +09:00
Randy Mackay 8e4c9518ea Copter: increase low voltage check to 10.5v 
Change requested by Rob Lefebvre and Richie Wilson
 2013-02-23 00:36:51 +09:00
Jason Short abd0fb9099 AC : global static variables should not be initialized to zero 2013-02-22 17:34:18 +09:00
Andrew Tridgell 4c7a1a1806 Copter: change PX4 main baud rate back to 115200 
we now use USB console
 2013-02-22 07:04:23 +11:00
Randy Mackay 2ecf34e509 Copter: update version to 2.9.1 ahead of release 2013-02-19 13:52:04 +09:00
Randy Mackay d48aebea8e Copter: updated release notes for 2.9.1-rc2 2013-02-19 13:49:53 +09:00
Randy Mackay 9904e9f4db Copter: update firmware version to 2.9.1-rc1 2013-02-19 13:43:36 +09:00
Randy Mackay 6601bd37cf Copter: integrate automatic roll and pitch trims 2013-02-19 12:51:24 +09:00
Michael Oborne 61e5b09f28 Send FS state to gcs for AC 2013-02-09 10:11:36 +08:00
Andrew Tridgell 19a282dad0 Copter: removed use of ins.temperature() 2013-02-07 15:05:47 +11:00
Pat Hickey d418197898 ArduCopter: fixed memory unsafe member access in GCS_MAVLINK 
* Smokey, this is not 'Nam. this is bowling. there are rules
 2013-02-02 22:43:56 -08:00
Randy Mackay 9d34ead486 Copter: fix up some casting issues for wp_distance 2013-02-01 22:42:50 +09:00
Randy Mackay df1c0d92bd Copter: manual throttle scaling fix 
Scaling of bottom half of throttle was changed from THR_MIN ~ 500.
Previously it was from 0 ~ 500.
 2013-02-01 22:37:33 +09:00
Randy Mackay a0b65a262b Copter: use scaled throttle for accel-throttle's I term 
Accel throttle's I term is taken from scaled manual throttle
 2013-02-01 22:37:25 +09:00
Randy Mackay 06a71af12f Copter: THR_MID used to scale manual throttle 2013-02-01 22:37:16 +09:00
Randy Mackay 4813526725 Copter: bug fix for autotrim's roll axis backwards 2013-01-31 17:42:29 +09:00
rmackay9 9c3b9907dd Copter: bug fix to set sonar_alt_health to zero when disabled 2013-01-31 17:00:28 +09:00
Randy Mackay 70371be4a1 Copter: use AP_Math's longitude_scale 
bug fix to base scaling on home location instead of next_WP which may
not have been initialised
 2013-01-27 23:35:12 +09:00
Randy Mackay 6f5050a8b9 Copter: minor casting fixup for wp_distance 2013-01-27 11:27:43 +09:00
Randy Mackay ce370bab0c Copter: rename CUR and CURR to CURRENT for logging 
Based on user complaint that enable/disable was using CUR while message
was appearing as CURR
 2013-01-26 17:20:41 +09:00
Randy Mackay fb1358a629 Copter: make all message output csv 2013-01-26 17:05:38 +09:00
Randy Mackay d2767b911c AP_Math: switch get_distance_cm to return uint32_t 
Includes changes required on ArduCopter and ArduPlane side as well
 2013-01-26 17:04:12 +09:00
Randy Mackay 0056bfadd7 Copter: rename ROLL_PITCH_LOITER 
new name ROLL_PITCH_LOITER_INAV makes it more clear that it should only
be used with the new inertial nav loiter controllers
 2013-01-25 23:27:31 +09:00
Randy Mackay b74fe10aa9 Copter: set each flight mode's nav_mode 
Allow ACRO flight mode's roll, pitch, yaw, throttle and nav mode to be
overwritten
 2013-01-25 15:57:55 +09:00
Randy Mackay aaecc25ac7 Copter: leonard's inav2 
Moved loiter controller to navigation.pde
 2013-01-25 15:16:35 +09:00
Randy Mackay fd02cfe706 Copter: added set_nav_mode to control initialisation of nav controllers 
Renamed run_navigation_controllers() to run_autopilot()
Renamed update_nav_wp() to update_nav_mode()
Renamed wp_control to nav_mode to be more consistent with roll-pitch,
yaw and throttle controllers
 2013-01-25 15:16:29 +09:00
Randy Mackay 8af605cafc Copter: set update rate to 50hz during esc calibration 
Also modified some comments in the code re the esc calibration
 2013-01-25 11:34:48 +09:00
Randy Mackay deafbf1f56 Copter: inav loiter comment changes 
removed unused get_loiter_vel function
 2013-01-24 11:14:38 +09:00
Randy Mackay 68fc9ac1d8 Copter: add "f" to end of float constants 
This is a small performance improvement for the px4
 2013-01-23 14:51:37 +09:00
Randy Mackay 911e090e07 Copter: typo fixed for trad heli config 2013-01-23 12:35:10 +09:00
Randy Mackay 9a09f086d2 Copter: Leonard Hall's inertial nav ver 2 2013-01-23 12:34:49 +09:00
Andrew Tridgell 47cc247046 Copter: limit number of bytes read per GCS check 2013-01-23 09:34:54 +11:00
rmackay9 ab1978ad50 Copter: Leonard Hall's inertial nav based loiter 2013-01-22 18:38:00 +09:00
Jonathan Challinger 6565d83e73 InertialNav: Fixed signs, remove body-frame rotation, apply correction at 100hz. 2013-01-22 18:37:45 +09:00
Andrew Tridgell f303554259 Copter: run serial0 at 57600 on PX4 2013-01-22 09:50:22 +11:00
Andrew Tridgell ae5f46abc9 Copter: fixed mavlink fetch of 16 character parameter 2013-01-21 16:52:01 +11:00
Robert Lefebvre dde713aaa5 Arducopter: Backing out my changes for a new Loiter Repositioning mode. Leonard and Jonathan's work will trump this. 2013-01-20 21:32:00 +09:00
Andrew Tridgell a341d59ed0 Copter: fixed test code warnings 2013-01-20 22:13:20 +11:00
Michael Oborne 74e3d64e62 AC Fix BATT_CURR_PIN number 2013-01-20 06:33:29 +08:00
Andrew Tridgell 580abf1106 Copter: fixed PX4 mag orientation 2013-01-17 17:23:34 +11:00
Randy Mackay 577bf865b3 Copter: update firmware version to 2.9-dev 
The -dev extension indicates that we are post 2.9 release
 2013-01-17 13:03:33 +09:00
James Bielman 5631f865b2 Update floating point calculations to use floats instead of doubles. 
- Allows use of hardware floating point on the Cortex-M4.
- Added "f" suffix to floating point literals.
- Call floating point versions of stdlib math functions.
 2013-01-16 13:52:01 +11:00
Randy Mackay ccaa7a52ef Copter: RTL bug fix to initial step is always a climb and not a descent 
Also bug fix to hold yaw on take-off
 2013-01-15 12:17:52 +09:00
Randy Mackay 2dab40abeb Copter: bug fix to altitude check of verify takeoff 
set_next_WP function was not setting the alt_change_flag properly
 2013-01-15 12:17:45 +09:00
Randy Mackay 148c227d73 Copter: update firmware version to rc5 2013-01-15 12:17:41 +09:00
Randy Mackay 04677bfb95 Copter: constrain auto roll and pitch to 45 degrees 2013-01-15 12:17:32 +09:00
Andrew Tridgell 56f22f9226 Copter: use common log reading function 2013-01-15 14:03:51 +11:00
jschall d6b3d370c3 Correct spelling of run_navigation_contollers 2013-01-14 16:45:15 -08:00
Randy Mackay 5418827f22 Copter: update parameter descriptions for FRAME and CH7_OPT 2013-01-14 15:49:26 +09:00
Randy Mackay 98f5e27dc3 Copter: small correction to RTL_ALT_FINAL param description 2013-01-14 15:21:19 +09:00
Randy Mackay 8bbc93bb04 Copter: added CH7 switch to enabling/disable the sonar in flight 
This indirectly switches surface tracking on/off which is useful to
avoid tracking the tops of uneven objects when far above the ground
 2013-01-14 14:00:08 +09:00
Randy Mackay df2137ed72 Copter: constrain loiter so that it never commands more than 45 degrees of lean in lat or lon directions 2013-01-14 13:34:19 +09:00
Randy Mackay fef7569dee Copter: added experimental LOITER_REPOSITIONING #define to config.h 
APM_Config.h should be used to overriding the standard parameters but
they still require a definition in config.h or they will be undefined
when built by the mission planner.
 2013-01-14 13:34:14 +09:00
Randy Mackay 76f032160c Copter: relax altitude check in verify_takeoff 
Previously we checked if the alt > target_alt but because there is
little to no overshoot with the new accel based alt controller this
check was failing for some users.
 2013-01-14 13:34:06 +09:00
Randy Mackay 8ac95d6034 ArduCopter: updated release notes for 2.9-rc4 2013-01-13 20:01:13 +11:00
Randy Mackay c1fa850d10 ArduCopter: update firmware version to 2.9-rc4 2013-01-13 20:01:09 +11:00
Randy Mackay c447b4b79b ArduCopter: move setting of land's yaw mode to the do_land function 2013-01-13 20:01:06 +11:00
Randy Mackay 08dc730d40 ArduCopter: bug fix to LAND flight mode not actually landing if initiated from failsafe 
An hidden bit of failsafe functionality in the set_mode function was
switching the throttle mode back to THROTTLE_AUTO instead of
THROTTLE_LAND
 2013-01-13 20:01:03 +11:00
Randy Mackay 175f69a64f ArduCopter: smooth throttle when switching from manual throttle to alt hold 
new set_accel_throttle_I_from_pilot_throttle function copies the
difference between the pilot's throttle and hover throttle to the
accelerometer based throttle controller's I term.
 2013-01-13 20:00:59 +11:00
Randy Mackay 9ad6f711f8 ArduCopter: replace FS_THR_RTL_MIN_DISTANCE with wp_radius 
This effectively means that an RTL kicked off by a failsafe will
immediately switch to LAND mode only if within 2 meters.  Previously the
radius was much wider (15m).
 2013-01-13 20:00:47 +11:00
Randy Mackay 19abdc3cd3 ArduCopter: update release notes for rc3 2013-01-13 20:00:43 +11:00
Randy Mackay 12f885c33c ArduCopter: disable ITERM logging by default 
This message takes 1ms to write and we are running over our limits on
some loops.
 2013-01-13 20:00:39 +11:00
Randy Mackay fbed8b8861 ArduCopter: alphabetized the contributors list 
Jonathan Challinger added
 2013-01-13 20:00:28 +11:00
Randy Mackay 5965914039 ArduCopter: increase firmware version to 2.9-rc3 2013-01-13 20:00:25 +11:00
Andrew Tridgell b0c710b67f Copter: move read_AHRS() before run_rate_controllers() 
this ensures the rate controllers use the latest data
 2013-01-13 20:00:14 +11:00
rmackay9 f25f1cb3bf ArduCopter: changed alt hold to use the sonar if enabled and healthy 2013-01-13 19:56:19 +11:00
rmackay9 21b6c78d12 ArduCopter: added get_throttle_althold_with_slew to allow slower altitude target changes 
Improved surface tracking by using slewed althold controller
Reduced sonar mode filter to just 3 elements to reduce lag but at the possible consequence of allowing sonar noise to creep through for people with margin sonar set-ups.
 2013-01-13 19:51:47 +11:00
Pat Hickey 164246c7d8 ArduCopter: better instructons for setup_motors cli test 
* i just spent hours confused about this
 2013-01-13 00:17:17 -08:00
Andrew Tridgell 72c8a14e76 Copter: fix trad heli log build 2013-01-13 17:57:47 +11:00
Andrew Tridgell 78fd5bb23f Copter: get rid of remaining Log.pde warnings 2013-01-13 17:53:39 +11:00
Andrew Tridgell 36e38eeef7 Copter: ensure ahrs.init() is called 2013-01-13 17:32:48 +11:00
Andrew Tridgell 3039c37f95 Copter: use macros from common header 2013-01-13 17:31:42 +11:00
Pat Hickey d7eeeab79e ArduCopter: fix new style Log.pde build for PX4. 
randy - you should please review these changes to make sure you wanted
to have the int16_t type in all of these structs, or how you want to
convert all these other integer types to int16_t if you do need it that
way.
 2013-01-12 13:11:25 -08:00
Randy Mackay 87627d883b ArduCopter: use new logging method for remaining packet types 
Additional changes include renaming RAW dataflash type to IMU
 2013-01-13 00:17:44 +09:00
Randy Mackay 177da0ca74 ArduCopter: fixed minor bug in logging of parameter changes to dataflash 
It is questionable whether we should even bother writing these to the
dataflash as there is no way to recognise which parameter has been
affectded
 2013-01-13 00:15:34 +09:00
Randy Mackay b4bbae56c6 ArduCopter: reduce redundant event logging 
We now only write state changes to the dataflash log when they have
changed.
Also replaced <tab> with <space> in AP_State.pde
 2013-01-13 00:13:10 +09:00
Andrew Tridgell af478d52bc Copter: use the new logging methods for 2 packet types 
the rest still need to be converted
 2013-01-12 18:15:23 +11:00
Andrew Tridgell 0fe7901422 Copter: only print perf data when SCHED_DEBUG is non-zero 2013-01-12 12:06:40 +11:00
Andrew Tridgell dcb181d2d8 Copter: use new AP_Scheduler library 2013-01-12 12:02:57 +11:00
Andrew Tridgell 585459ece9 Copter: tweak the serial buffer sizes 
we only need the large buffers for HIL
 2013-01-11 10:31:55 +11:00
Andrew Tridgell 2e57720444 Copter: move memcheck_init() earlier in setup 2013-01-11 10:24:21 +11:00
Andrew Tridgell 21e979910f Copter: improved 'FRAME' docs 2013-01-10 15:44:13 +11:00
Pat Hickey 0ff6ed12b1 ArduCopter Makefile: Don't include targets.mk directly (included by apm.mk) 2013-01-09 13:15:38 -08:00
James Bielman 7374e5d84e ArduCopter: Use 16-bit arithmetic when comparing event tick counters. 
- On the ARM, once the tick counter wrapped, we stopped running events
  because the wraparound case wasn't being handled correctly.  Make
  sure the comparison is 16 bits to prevent this.
 2013-01-09 11:19:52 -08:00
James Bielman 7827a4a54a ArduCopter: Add AP_HAL_SMACCM support. 
- Added default configuration to "config.h".
- Added main function to run under FreeRTOS with HWF4.
 2013-01-09 11:19:51 -08:00
James Bielman ab37f833db MS5611: Fix CONFIG_MS5611_SERIAL definitions. 
- Make sure the values are defined as integers.  We were always using
  SPI rather than using I2C when desired.
 2013-01-09 11:19:51 -08:00
Andrew Tridgell e575c5eba0 Copter: read baro at 50Hz 2013-01-09 23:46:05 +11:00
Andrew Tridgell 269804e866 Copter: use barometer.accumulate() 
this gives us more consistent timing and faster baro reads on APM1
 2013-01-09 23:08:19 +11:00
Andrew Tridgell 91ad870f11 Copter: check bitmask in more logging functions 2013-01-09 23:06:40 +11:00
Andrew Tridgell a237b6cc7b Copter: update for new AP_Param API 2013-01-09 13:30:58 +11:00
Andrew Tridgell 860f4b2605 Copter: merge the latest 2.9 changes into master 2013-01-08 14:37:40 -08:00
Andrew Tridgell d11dde578f Copter: a useful bit of timing debug code 
enable when looking at main loop timing
 2013-01-07 11:07:44 +11:00
Andrew Tridgell 647b3b09b6 Copter: ensure we process deferred mavlink messages 2013-01-07 11:07:39 +11:00
Andrew Tridgell d952ccf968 Copter: added main_loop_ready() function 
this tells us when the main loop is ready to run. MAVLink won't send a
message if the main loop could run.
 2013-01-07 11:07:34 +11:00
Andrew Tridgell b079a96eaf Copter: removed GPS_STATUS message 
this message is huge, and completely pointless now that we have
num_satellites in GPS_RAW_INT
 2013-01-05 20:39:31 +11:00
Andrew Tridgell c48714be16 Copter: enabled PX4 sensors 2013-01-05 20:39:31 +11:00
James Bielman 264db3670e AP_Baro: Add CONFIG_MS5611_SERIAL option to choose between SPI and I2C. 
- Update ArduCopter and ArduPlane modules to pass the correct serial
  driver to the MS5611 driver.
- Update barometer examples, assuming SPI.
 2013-01-03 13:48:06 -08:00
rmackay9 ed79e8c954 ArduCopter: correct TRIM_THROTTLE parameter comments 2013-01-03 00:39:18 +09:00
rmackay9 861a66e26e ArduCopter: remove @brief from GCS_MAVLINK class's comments because they mess up the mission planner's parsing of parameter descriptions 2013-01-03 00:34:10 +09:00
rmackay9 ba8e9c8f9e ArduCopter: revert path for reading gcs parameter descriptions 2013-01-02 23:51:27 +09:00
rmackay9 d56e9cc701 ArduCopter: change path for GCS_Mavlink parameter descriptions 2013-01-02 23:42:05 +09:00
rmackay9 4ef7e7b1c6 ArduCopter: add parameter descriptions for GCS_Mavlink objects 2013-01-02 23:36:48 +09:00
Andrew Tridgell 94e3322e24 Copter: fixed build on px4 2013-01-02 22:09:02 +11:00
rmackay9 886329898c ArduCopter: minor fixup to a few parameter descriptions 2013-01-02 18:50:25 +09:00
rmackay9 ac028cca74 ArduCopter: remove spaces to allow MP to parse RC Channel parameter descriptions 2013-01-02 18:40:59 +09:00
rmackay9 42a5d183da ArduCopter: added parameter descriptions for optflow, throttle and loiter pid controllers 2013-01-02 18:32:11 +09:00
rmackay9 ffa923981c ArduCopter: added parameter description for navigation and some throttle controllers 2013-01-02 17:44:21 +09:00
rmackay9 4a975d35ce ArduCopter: add parameter descriptions for loiter's lat and lon rate controllers 2013-01-02 17:20:58 +09:00
rmackay9 c595a1e9a2 ArduCopter: updated parameters for roll, pitch and yaw rate controllers. 
Also added reference to AP_Motors_Class.cpp so that parameter descriptions can be seen in mission planner.
 2013-01-02 17:05:57 +09:00
Andrew Tridgell 374af1cd14 build: change from Arduino.mk to apm.mk 2013-01-02 17:29:37 +11:00
Andrew Tridgell e56a7eacec Copter: don't pass board version to motors 2013-01-02 15:28:34 +11:00
Andrew Tridgell 394dccf9a8 Copter: make config defaults match 2.9 2013-01-02 15:27:42 +11:00
Andrew Tridgell ead38f917f Copter: use GRAVITY_MSS 2013-01-02 14:45:08 +11:00
Robert Lefebvre b9594e7123 Parameters: Fixing a typo 2013-01-01 20:13:00 -05:00
Andrew Tridgell 4236b10edc Copter: fixed board ID string 2013-01-02 10:18:05 +11:00
Andrew Tridgell 17a63dc76a Copter: fixes for AP_HAL merge 2013-01-02 09:55:55 +11:00
Andrew Tridgell 51d987a890 Copter: removed unusued variable 2013-01-02 09:55:55 +11:00
rmackay9 9b2956b377 ArduCopter: increase throttle rate P to 6.0 (was 1.0) and alt hold P to 2.0 (was 1.0) 2013-01-02 09:55:37 +11:00
rmackay9 228ad2198f ArduCopter: update firmware version to 2.9-rc2 2013-01-02 09:55:37 +11:00
rmackay9 2181ec2ab0 ArduCopter: log watchdog event to dataflash 2013-01-02 09:55:37 +11:00
rmackay9 16f99ebcab ArduCopter: fix to sub system used to record failsafe in dataflash ERR message 2013-01-02 09:55:37 +11:00
rmackay9 672fdfbf71 ArduCopter: added ERR dataflash message 
Failsafe events changed to errors so they are more obvious.
Errors recorded to dataflash for failure to init compass and optical flow sensor.
Errors recorded for pwm failure.
Resolved a compile error when dataflash logging is disabled.
 2013-01-02 09:55:37 +11:00
rmackay9 677b38a48e ArduCopter: first implementation of surface tracking using sonar 
Note: not yet enabled as part of any flight mode
 2013-01-02 09:55:37 +11:00
rmackay9 92e271e517 AP_InertialNav: increase baro delay to 0.5 sec (was 0.2sec) to allow slower baro updates on APM1 2013-01-02 09:55:37 +11:00
rmackay9 d400e5040b ArduCopter: turn on INERTIAL_NAV_Z in the config.h file so that it takes effect when built for the mission planner 2013-01-02 09:55:37 +11:00
rmackay9 daac540e08 ArduCopter: get_throttle_althold - add check to avoid divide by zero 2013-01-02 09:55:37 +11:00
rmackay9 0decd870dc ArduCopter: inertial nav - only initialise horizontal position when home is initialised 2013-01-02 09:55:37 +11:00
rmackay9 4c14010029 ArduCopter: update release notes for 2.9-rc1 2013-01-02 09:55:37 +11:00
rmackay9 576af6d487 ArduCopter: bug fix to althold desired rate calculation. Fix from Jonathan. 2013-01-02 09:55:37 +11:00
rmackay9 02bf3ea027 ArduCopter: Battery failsafe triggers RTL only if we are more than 15m from home, otherwise it performs a LAND 2013-01-02 09:55:37 +11:00
rmackay9 ff40fa6aab ArduCopter: alt hold bug fix - should use 2x linear distance when calculating the desired rate 
Bug fix from Leonard.
 2013-01-02 09:55:37 +11:00
rmackay9 68b62abd38 ArduCopter with the new Camera and Relay classes for APM1 and APM2. 
All changes by Sandro Benigno
 2013-01-02 09:55:37 +11:00
rmackay9 393c893cdb ArduCopter: bug fix (attempt #2) for accel based throttle controller 
Thanks to Jonathan for this.
 2013-01-02 09:25:58 +11:00
rmackay9 e583ade62d ArduCopter: bug fix to accel based throttle controller (was using m/s instead of cm/s) 2013-01-02 09:24:31 +11:00
rmackay9 e77b54c7dc ArduCopter: bug fix to GUIDED mode. Now checks that desired altitude was reached before deciding the waypoint is complete. 2013-01-02 09:24:31 +11:00
rmackay9 e850ab7ccd ArduCopter: add AUTO_VELZ_MIN, AUTO_VELZ_MAX and PILOT_VELZ_MAX to allow better control of climb/descent rate in auto and manual throttle modes 2013-01-02 09:24:31 +11:00