Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
31,080 Commits 71 Branches 509 Tags 715 MiB
Commit Graph

16050 Commits

Author SHA1 Message Date
proficnc c613c0bde2 added the cube red hardware definition 2018-02-07 20:33:45 +11:00
Andrew Tridgell 442b280368 AP_IOMCU: improved error checking 
and avoid pointless change of rates
 2018-02-07 20:33:45 +11:00
Andrew Tridgell 3dacbd1b36 HAL_ChibiOS: hold write lock for unbuffered writes 2018-02-07 20:33:45 +11:00
Andrew Tridgell ad26ca4a27 HAL_ChibiOS: implement parity and stop bits controls 2018-02-07 20:33:45 +11:00
Andrew Tridgell 2e15285c51 HAL_ChibiOS: refuse unbuffered writes without DMA 
we would need much more complex code to handle this
 2018-02-07 20:33:45 +11:00
Andrew Tridgell 5ffcff1a79 AP_IOMCU: use unbuffered UART writes 
this lowers latency for servo outputs to the IOMCU
 2018-02-07 20:33:45 +11:00
Andrew Tridgell 3f2cc2c9d6 HAL_ChibiOS: implement low latency UART writes 
this implements the set_unbuffered_writes() API by performing writes
directly in the write() call and not from a timer
 2018-02-07 20:33:45 +11:00
Andrew Tridgell 015c3a1fa3 HAL_ChibiOS: removed duplicate defines 2018-02-07 20:33:45 +11:00
Andrew Tridgell 2bb99bfe53 HAL_VRBRAIN: implement _timer_tick in UARTDriver 2018-02-07 20:33:45 +11:00
Andrew Tridgell e276edbb03 HAL_SITL: implement _timer_tick in UARTDriver 2018-02-07 20:33:45 +11:00
Andrew Tridgell e4fc0e9f62 HAL_QURT: implement _timer_tick in UARTDriver 2018-02-07 20:33:45 +11:00
Andrew Tridgell 25ea60da69 HAL_PX4: implement _timer_tick in UARTDriver 2018-02-07 20:33:45 +11:00
Andrew Tridgell 22de99dd58 HAL_Linux: implement _timer_tick in UARTDriver 2018-02-07 20:33:45 +11:00
Andrew Tridgell 865e4f3104 HAL_ChibiOS: implement _timer_tick in UARTDriver 2018-02-07 20:33:45 +11:00
Andrew Tridgell 5179d13dbf AP_HAL: added virtual _timer_tick method on UARTDriver 
this is needed to allow HALs to update UARTs when the number of UARTs
they bhave varies (some may be instances of HAL_Empty)
 2018-02-07 20:33:45 +11:00
Andrew Tridgell a5bafb399f HAL_ChibiOS: adjust SPI pin speeds 2018-02-07 20:33:45 +11:00
Holger Steinhaus 36f0b429fb GCS_MAVLink: send BATTERY_STATUS.energy_consumed if current measurement is available 2018-02-06 20:00:16 -07:00
Holger Steinhaus d1a37a60b7 DataFlash: log consumed energy (Wh) 2018-02-06 20:00:16 -07:00
Holger Steinhaus 7383552ebc AP_BatteryMonitor: count mWh spent since powerup 2018-02-06 20:00:16 -07:00
Igor Anokhin e6d4b2a087 AP_InertialSensor: add LSM9DS1 entry 
Enable LSM9DS1 in case it is selected
 2018-02-06 09:31:26 -08:00
Igor Anokhin 5cf15db966 AP_HAL: add LSM9DS1 defines 
Add defines for name and number sensor
 2018-02-06 09:31:26 -08:00
Igor Anokhin be386b2b73 AP_InertialSensor: LSM9DS1 add FIFO support 
Make reading data with FIFO
 2018-02-06 09:31:26 -08:00
Igor Anokhin 44d5112488 AP_InertialSensor: add LSM9DS1 support 
Make LSM9DS1 driver
 2018-02-06 09:31:26 -08:00
Nicholas Engle 1103e92884 SITL: Add SIM_WIND_DIR_Z parameter for SITL 
This controls the vertical pitch of the 3d wind vector, allowing futher control of the wind
using systems like dronekit. This change directly effects the calcuation of the wind vector
 2018-02-05 16:38:53 -08:00
Nicholas Engle 8b08e9388d AP_HAL_SITL: Add SIM_WIND_DIR_Z parameter for SITL 
This controls the vertical pitch of the 3d wind vector, allowing futher control of the wind
using systems like dronekit. This change directly effects the calcuation of the wind vector
 2018-02-05 16:38:53 -08:00
Michael du Breuil 725f1a2f2b DataFlash: Use battery singleton 2018-02-06 00:11:32 +00:00
Michael du Breuil 03bf247d36 AP_BattMonitor: Create a battery singleton 
Also logs battery data from the read function directly
 2018-02-06 00:11:32 +00:00
Andrew Tridgell 83d1e71cb2 AP_Baro: ran BMP085 driver through code formatter 2018-02-05 12:12:03 +11:00
night-ghost 2c043b822b AP_Baro: fixed BMP085 driver for current API 2018-02-05 12:12:03 +11:00
mirkix bf758098d7 AP_HAL_Linux: fix deallocation 2018-02-05 11:05:12 +11:00
LukeMike 3dcaf83eaa VRBRAIN / DataFlash: some update for new VR Brain 5.2E (EEPROM version) 2018-02-05 08:26:49 +11:00
LukeMike 250bf53912 VRBRAIN / AP_HAL_VRBRAIN: some update for new VR Brain 5.2E (EEPROM version) 2018-02-05 08:26:49 +11:00
LukeMike bfcece7edd VRBRAIN / AP_HAL: some update for new VR Brain 5.2E (EEPROM version) 2018-02-05 08:26:49 +11:00
LukeMike ccb316f3f3 VRBRAIN / AP_BoardConfig: some update for new VR Brain 5.2E (EEPROM version) 2018-02-05 08:26:49 +11:00
LukeMike 8b737c54b9 VRBRAIN / AP_BattMonitor: some update for new VR Brain 5.2E (EEPROM version) 2018-02-05 08:26:49 +11:00
LukeMike bf6e57e7a4 VRBRAIN / DataFlash: added writebuf_chunk for VR Brain 5.4 2018-02-05 08:26:49 +11:00
LukeMike 721f55e93c VRBRAIN / AP_RangeFinder: removed AP_RangeFinder_PX4_PWM for VR Brain boards 2018-02-05 08:26:49 +11:00
LukeMike a319f6632f VRBRAIN / AP_RPM: removed RPM_PX4_PWM for VR Brain 5.1 and VR Micro Brain 5.2 (they haven't this input pin) 2018-02-05 08:26:49 +11:00
LukeMike 502f19cbae VRBRAIN / AP_InertialSensor: added inertial sensors init for VR Brain boards 2018-02-05 08:26:49 +11:00
LukeMike 432f6c2a4a VRBRAIN / APCompass: added compass sensor init for VR Brain boards 2018-02-05 08:26:49 +11:00
LukeMike d48f9397d0 VRBRAIN / AP_Baro: added barometer sensor init for VR Brain boards 2018-02-05 08:26:49 +11:00
LukeMike dab8f93628 VRBRAIN / AP_HAL: changed vrbrain board configuration file 2018-02-05 08:26:49 +11:00
LukeMike 505497b555 VRBRAIN / AP_BoardConfig: added fmu_mode parameter for VR Brain boards 2018-02-05 08:26:49 +11:00
LukeMike b7985f77b5 VRBRAIN / AP_BoardConfig: added VR Brain boards into board_setup_drivers and board_autodetect 2018-02-05 08:26:49 +11:00
LukeMike 6b820ac9e4 VRBRAIN / AP_BoardConfig: added VR Brain define into px4_board_type enum 2018-02-05 08:26:49 +11:00
LukeMike 97b29a333d VRBRAIN / AP_HAL_VRBRAIN: updated AP_HAL 2018-02-05 08:26:49 +11:00
Michael du Breuil 200aacea43 AP_AdvancedFailsafe: Report MAV_PROTOCOL_CAPABILITY_FLIGHT_TERMINATION 2018-02-03 09:36:03 +09:00
Randy Mackay f189ce5c68 AC_WPNav: minor formatting fix 
non-functional change
 2018-02-02 20:55:20 +09:00
Andrew Tridgell 2067e25523 AP_Compass: make length filter in MAG3110 optional 
compile time for now, later can may become parameter
 2018-02-02 21:07:40 +11:00
night-ghost 2065cc879c AP_HAL: mAG3110 driver 2018-02-02 21:07:40 +11:00
night-ghost b6bf90ab93 AP_Compass: mAG3110 driver 2018-02-02 21:07:40 +11:00
Andrew Tridgell 1513246040 AP_FlashStorage: fixed two bugs found by night-ghost 
this fixes two issues found by night-ghost. The first occurs if a 16
bit flash write is not atomic and only the first byte is written. Then
we could end up declaring the data invalid on reboot and erasing.

The second is a race in switching sectors. If power off occurs at the
wrong time we would trigger en erase on reboot.
 2018-02-02 14:19:12 +09:00
mirkix 8da1252959 AP_BattMonitor: add default pins and values for BeagleBone Blue 2018-02-02 10:01:34 +09:00
Peter Barker adde7bc588 AP_Terrain: fix snprintf buffer length warning 
Also includes fix from Tridge to use MIN() instead of MAX()
 2018-02-02 09:59:06 +09:00
murata 8070c13963 AP_Soaring: delete \n from the log using gcs().send_text 2018-02-02 09:41:23 +09:00
murata cdfca9d9ea AP_HAL_PX4: delete \n from the log using gcs().send_text 2018-02-02 09:40:55 +09:00
murata 5b3a402d36 AP_Camera: delete \n from the log using gcs().send_text 2018-02-02 09:40:05 +09:00
murata 3ec733d4f8 AP_BattMonitor: Aggregate the commands defined in the SMBUS specification. 
AP_BattMonitor: Aggregate the commands defined in the SMBUS specification.
 2018-02-02 09:17:30 +09:00
Peter Barker 8e8b0dcc06 DataFlash: add ? and - to multiplier table 
This allows a consumer to expect referential integrity for the
multipliers
 2018-02-02 09:15:59 +09:00
Tatsuya Yamaguchi aef9fa4a63 AP_NavEKF3: delete \n from the log using gcs().send_text 2018-02-02 09:13:54 +09:00
Lucas De Marchi 184b017b33 AP_HAL: fix warning from having undefined HAL_WITH_IO_MCU 
In file included from ../../libraries/AP_IOMCU/AP_IOMCU.cpp:8:0:
../../libraries/AP_IOMCU/AP_IOMCU.h:10:5: warning: "HAL_WITH_IO_MCU" is not defined [-Wundef]
 #if HAL_WITH_IO_MCU
     ^
../../libraries/AP_IOMCU/AP_IOMCU.cpp:10:5: warning: "HAL_WITH_IO_MCU" is not defined [-Wundef]
 #if HAL_WITH_IO_MCU
     ^
And so on.
 2018-02-02 09:11:46 +09:00
Randy Mackay 3badcdcfba AC_PosControl: default gains for sub 2018-01-31 08:48:21 +09:00
Randy Mackay 61933c6f1c AC_PosControl: shorten PSC_ACCELZ param to PSC_ACCZ 2018-01-31 08:48:21 +09:00
murata 6a87840c7a AP_NavEKF3: Change the if statement to a switch statement. 2018-01-28 22:20:08 +00:00
Leonard Hall 692e6518cc AC_AttitudeControl: update param desc values for large copters 2018-01-27 11:54:04 +09:00
Leonard Hall 691abab95e AC_AttitudeControl: Update parameter ranges 2018-01-27 11:38:09 +09:00
David Ingraham 2547ca399a AP_Airspeed: Fix ARSPD2_TYPE docs 2018-01-26 13:19:53 -08:00
Randy Mackay ebf405e53d AC_Avoid: reduce min and default DIST_MAX values 2018-01-25 11:16:01 +09:00
Andrew Tridgell 6558da2c4c HAL_SITL: fixed valgrind error in ubx driver 
this was causing a valgrind error on all runs with a virtual ublox GPS
 2018-01-24 18:00:42 -07:00
night-ghost 3165d72647 AP_Motors: reduce unnecessary multiple call of get_compensation_gain() 2018-01-24 19:26:15 +09:00
Andrew Tridgell c6c5603382 AP_Param: added back key dumping code 
this is essential for working out conversion tables.
 2018-01-24 18:23:59 +11:00
mirkix c5eb52bf8d AP_HAL_Linux: fix comment 2018-01-23 13:32:12 -08:00
bnsgeyer 7a9e424977 AP_Motors: added comments to indicate parameter indices previously used by RSC_PWM_MIN, RSC_PWM_MAX, and RSC_PWM_REV 2018-01-23 14:12:27 +09:00
Randy Mackay 04822152da AC_PID: fixes after peer review of AC_PID_2D 2018-01-23 12:00:43 +09:00
Randy Mackay efbd8eb386 AC_WPNav: remove unused definition 
This has been moved to AC_PosControl library
 2018-01-23 12:00:43 +09:00
Randy Mackay 368245017a AC_WPNav: access pos-controller's horizontal p object 2018-01-23 12:00:43 +09:00
Randy Mackay 9c00eb3d5f AC_PosControl_Sub: move pids to be local 2018-01-23 12:00:43 +09:00
Randy Mackay c70d3e0ab8 AC_PosControl: move pids to be local 2018-01-23 12:00:43 +09:00
Randy Mackay 00037fd50e AC_PosControl_Sub: replace velocity pi with local pid 2018-01-23 12:00:43 +09:00
Randy Mackay 3a73ff1e2e AC_PosControl: replace velocity control with local 2-axis PID 2018-01-23 12:00:43 +09:00
Randy Mackay 398a0d89bf AC_P: add const accessor 2018-01-23 12:00:43 +09:00
Randy Mackay c1708db208 AC_PID: add const and use is_positive in AC_PI_2D 2018-01-23 12:00:43 +09:00
Leonard Hall fd964a21d6 AC_PID: add AC_PID_2D 2018-01-23 12:00:43 +09:00
Randy Mackay 9ea16bec15 AP_InertialSensor: resolve compiler warning in example 2018-01-23 08:32:48 +09:00
Steven Josefs e8debde4b7 AC_Fence: hide ALT_MAX parameter from Rover 2018-01-22 20:42:31 +09:00
Randy Mackay a1bf9d66f0 AC_Avoid: default behaviour to stop for Rovers 2018-01-22 17:18:41 +09:00
Randy Mackay ae4ded86a8 AC_Avoid: get_max_speed supports linear acceleration 
Also get_stopping_distance supports linear deceleration
 2018-01-22 17:18:41 +09:00
Randy Mackay dfaabb543c AC_Avoid: add adjust_speed 
this method accepts a heading and speed instead of a velocity vector
 2018-01-22 17:18:41 +09:00
Randy Mackay 9d74d82ff6 AC_Avoid: add stopping behaviour 2018-01-22 17:18:41 +09:00
Randy Mackay c28cfcdc27 AP_Math: add Vector2f::circle_segment_intersection 2018-01-22 17:18:41 +09:00
Randy Mackay a655c36159 AP_Math: add Vector2f::segment_intersection 2018-01-22 17:18:41 +09:00
Andrew Tridgell 2c73b374f5 AP_Motors: protect against writes to NULL servo_aux 
if user changes parameter while setting up it could crash
 2018-01-21 21:12:13 +11:00
Andrew Tridgell bdb9f062ae AP_Motors: removed unused pwm parameters for heli 2018-01-21 21:12:13 +11:00
bnsgeyer ac2e933358 AP_Motors: Tradheli - Fixed Directdrive Variable Pitch Feature 2018-01-21 21:12:13 +11:00
Andrew Tridgell 7b251c9739 HAL_ChibiOS: lower FRAM CS speed to 2MHz 
this matches old firmware
 2018-01-20 17:40:07 +11:00
Andrew Tridgell 30fd2da108 HAL_ChibiOS: enable RTSCTS and SBUS_OUT 2018-01-20 17:40:07 +11:00
Andrew Tridgell 93a993c575 AP_HAL: setup RTSCTS and SBUS_OUT 2018-01-20 17:40:07 +11:00
Andrew Tridgell f8a3b0e753 AP_BoardConfig: improved board config 
use hwdef.dat to enable RTSCTS and SBUS_OUT
 2018-01-20 17:40:07 +11:00
Andrew Tridgell 63671b06a8 HAL_ChibiOS: added HAL_I2C_MAX_CLOCK define 2018-01-20 17:40:07 +11:00
Andrew Tridgell 88f11f5a50 HAL_ChibiOS: added HAL_I2C_BUS_BASE 
this allows fmuv4 to start at bus 1
 2018-01-20 17:40:07 +11:00
bugobliterator c60c0b8ab1 HAL_ChibiOS: fix undef line processing 2018-01-20 17:40:07 +11:00
Andrew Tridgell 8286486890 HAL_ChibiOS: drop default SPI priority to 179 2018-01-20 17:40:07 +11:00
Andrew Tridgell ab748034a2 HAL_ChibiOS: removed RC inversion logic 
not needed any more
 2018-01-20 17:40:07 +11:00
Andrew Tridgell d6b9ab7756 AP_RCProtocol: tidy up frontend/backend split 2018-01-20 17:40:07 +11:00
Andrew Tridgell ff5e00da32 AP_RCProtocol: fixed DSM decoding 2018-01-20 17:40:07 +11:00
bugobliterator 7db19cfae0 HAL_ChibiOS: use separate parameter for detect timeout 2018-01-20 17:40:07 +11:00
Andrew Tridgell 613d7a47ba HAL_ChibiOS: support RCIN on mindpx-v2 2018-01-20 17:40:07 +11:00
bugobliterator 02c7513f83 HAL_ChibiOS: add invert method and fix width measurement 2018-01-20 17:40:07 +11:00
bugobliterator f7ac5aa079 HAL_ChibiOS: put rcin on a separate thread 2018-01-20 17:40:07 +11:00
Andrew Tridgell f50f427a59 HAL_ChibiOS: added comment on beta fmuv4 board 2018-01-20 17:40:07 +11:00
Andrew Tridgell 743806116d HAL_ChibiOS: removed unusued ppm driver 
now uses AP_RCProtocol
 2018-01-20 17:40:07 +11:00
Andrew Tridgell ccb85c2707 HAL_ChibiOS: fixed fmuv3 build with no ICU 2018-01-20 17:40:07 +11:00
Andrew Tridgell f87668c15c AP_RCProtocol: lock onto a single protocol to reduce CPU cost 2018-01-20 17:40:07 +11:00
Andrew Tridgell 33c7cba9af HAL_ChibiOS: use more efficient push mechanism in IRQ 
and don't use push_force() as it is not safe to do reads from within
the producer
 2018-01-20 17:40:07 +11:00
Andrew Tridgell d030f2888b AP_HAL: added multi-object push to RingBuffer 
this is much more efficient than pushing them one at a time
 2018-01-20 17:40:07 +11:00
Andrew Tridgell 7a4f429b85 HAL_ChibiOS: don't adjust buffer size for protocol 
its all about IRQ latency, not IRQ rate
 2018-01-20 17:40:07 +11:00
Andrew Tridgell e2c8fe27ef HAL_ChibiOS: fixed memory handling in SoftSigReader 2018-01-20 17:40:07 +11:00
Andrew Tridgell 8be59c73c7 AP_RCProtocol: fixed return value when no input 2018-01-20 17:40:07 +11:00
bugobliterator bad9f2b4c9 AP_RCProtocol: add library to process RC signals 2018-01-20 17:40:07 +11:00
bugobliterator eeea2c9961 HAL_ChibiOS: use software signal reader for RCInput if available 2018-01-20 17:40:07 +11:00
bugobliterator 6be4c710c3 HAL_ChibiOS: add Software Signal reader using timer and DMA 2018-01-20 17:40:07 +11:00
bugobliterator 1db1ff799e HAL_ChibiOS: modify hwdef scripts to setup for generic RCIN 2018-01-20 17:40:07 +11:00
bugobliterator 1970d8a2c8 HAL_ChibiOS: use common RCIN pin for fmuv4 2018-01-20 17:40:07 +11:00
bugobliterator 445ba6ed39 HAL_ChibiOS: update ppm to use Extended ICU driver 2018-01-20 17:40:07 +11:00
Andrew Tridgell 7c23e33775 HAL_Chibios: set min output rate for oneshot to 100Hz 
this will keep ESCs happy during gyro cal
 2018-01-20 17:40:07 +11:00
Andrew Tridgell b07c599bf2 Hal_Chibios: allow for faster INS sample times 
we need higher priority on SPI and faster device loops
 2018-01-20 17:40:07 +11:00
Andrew Tridgell 25f13ed518 HAL_Chibios: adjust MPU9250 clock speed down 
this helps with fast sampling enabled
 2018-01-20 17:40:07 +11:00
Andrew Tridgell 7e44b06440 HAL_ChibiOS: adjust SPI clock rates on FMUv4 
this prevents some timing errors on the IMUs
 2018-01-20 17:40:07 +11:00
Andrew Tridgell dd59a5ff57 HAL_ChibiOS: adjust external bus clock for mpu9250 
this fixes an issue with fast sampling on the PH2.1 cube
 2018-01-20 17:40:07 +11:00
Andrew Tridgell 93fa74518a AP_IOMCU: limit rate to IOMCU to 500Hz 
when running with very high loop rates we can saturate the IO link
 2018-01-20 17:40:07 +11:00
Andrew Tridgell 880a84294e HAL_ChibiOS: support oneshot mode 
supports oneshot 125 and oneshot
 2018-01-20 17:40:07 +11:00
Andrew Tridgell 38a36a070f DataFlash: removed some special cases for ChibiOS 2018-01-20 17:40:07 +11:00
Andrew Tridgell 30903f2acb AP_IOMCU: support oneshot mode 2018-01-20 17:40:07 +11:00
Andrew Tridgell ba3cdf74b5 HAL_Chibios: optional ADC debugging 
this debugging capability is very useful on board bringup. It outputs
the first 6 analog channels as an AP_ADC MAVLink message
 2018-01-20 17:40:07 +11:00
Andrew Tridgell c863681849 HAL_ChibiOS: fixed PWM output assignment 2018-01-20 17:40:07 +11:00
Andrew Tridgell 82c6d2751f HAL_ChibiOS: fixed F412 ram and flash setup 2018-01-20 17:40:07 +11:00
Peter Barker 87be7fea0c AP_HAL: added support for Sparky2 STM23F405 board 2018-01-20 17:40:07 +11:00
Peter Barker 67bed1d6c2 HAL_ChibiOS: added support for Sparky2 STM23F405 board 2018-01-20 17:40:07 +11:00
Siddharth Purohit a6be19d8cf HAL_SITL: fix sitl build for mac osx 2018-01-20 17:35:08 +11:00
Andrew Tridgell 8b0e9bcff4 AP_Scheduler: use pre-computed loop constants 
this prevents changing the loop rate without a reboot. Too many
subsystems rely on a consistent loop rate to allow it to be changed
 2018-01-20 15:35:58 +11:00
Peter Barker f2242e07db AP_Scheduler: remove memoisation in loop_period_s() 2018-01-20 15:35:58 +11:00
Peter Barker a6ac37d0ba AP_Scheduler: eliminate MAIN_LOOP_SECONDS macro 2018-01-20 15:35:58 +11:00
Leonard Hall e249e06714 AC_PosControl: minor enhancement to lean_angles_to_accel 2018-01-20 09:49:58 +09:00
Andrew Tridgell 44dd079cb9 AP_Scheduler: allow for loop rates above 400Hz 
with ChibiOS we can run copter at 1KHz with no scheduling misses. This
small PR allows that to be configured.
 2018-01-20 10:40:37 +11:00
Andrew Tridgell 100363ba03 AP_InertialSensor: if no sensors found allow parameter change 2018-01-20 10:36:22 +11:00
Andrew Tridgell 24c424ae5d AP_InertialSensor: support over 1kHz IMUs 
this allows for invensense IMUs to run above 1kHz by adjusting the
downsampling rate
 2018-01-20 10:36:22 +11:00
Andrew Tridgell c0c5f23aa5 AP_InertialSensor: added INS_ENABLE_MASK 
this allows for only a specified subset of IMUs to be probed, so you
can disable IMUs that aren't needed.

The back corresponds to bits in the order the IMUs are normally probed
on the board
 2018-01-20 10:36:22 +11:00
Andrew Tridgell 9416165fe3 AP_InertialSensor: improved invensense debugging on ChibiOS 2018-01-20 10:36:22 +11:00
Leonard Hall d5976442f8 AC_PosControl: minor comment change 
non-functional change
 2018-01-19 15:40:32 +09:00
Leonard Hall 3ada0f32b0 AC_AttitudeControl: minor comment update 
Non-functional change
 2018-01-19 15:40:24 +09:00
mirkix 700171a0fc AP_HAL_Linux: add second RCIN port for Blue 2018-01-17 15:25:51 -08:00
Michael du Breuil 8712fbd55d AP_BattMonitor: Move per battery params into a containing class 2018-01-17 22:21:55 +00:00
Michael du Breuil bb0d43d03c AP_BattMonitor: Remove unneeded memebers 
is_powering_off was only used for solo, and was just an intermediate
copy before updating notify
 2018-01-17 22:21:55 +00:00
Michael du Breuil a1a5665213 AP_Param: Support marking a param group as ignoring the enable flag 2018-01-17 22:21:55 +00:00
Nikita Tomilov 1549b1a52a AP_BoardConfig: CAN: Merge PX4 and Linux CAN setup 
Here we merge PX4 and Linux CAN bus setup since the interface is almost
the same for both of them.
 2018-01-17 07:24:17 -08:00
Tom Pittenger d713d57904 AP_HAL_Linux: update software license referencing UAVCAN submodule 2018-01-17 07:24:17 -08:00
Nikita Tomilov 3ac2e4e8c5 AP_HAL_Linux: CAN: _pollRead no more than 100 iterations 
This adds a counter here to only loop to a maximum number of iterations.
Now we avoid situations in which we would be stuck processing packets here.
This also adds some other meaningful defines
 2018-01-17 07:24:17 -08:00
Nikita Tomilov 43bfcbc8e2 AP_HAL_Linux: CAN: Rename CANDriver -> CANManager 2018-01-17 07:24:17 -08:00
Nikita Tomilov d0fc481202 AP_HAL_Linux: CAN: Rename Linux::LinuxCAN -> Linux::CAN 2018-01-17 07:24:17 -08:00
Alexey Bulatov e0acbd3e53 AP_HAL_LINUX: Add CAN to timer_task 2018-01-17 07:24:17 -08:00
Alexey Bulatov 606eb05c95 AP_BoardConfig: Linux CAN initialisation 2018-01-17 07:24:17 -08:00
Nikita Tomilov a50e6c6dd7 AP_HAL: board: linux: Add default CAN interface name 2018-01-17 07:24:17 -08:00
Nikita Tomilov b6665f7e58 AP_HAL_Linux: CAN: get rid of RaiiCloser 2018-01-17 07:24:17 -08:00
Alexey Bulatov 976500960f AP_HAL_LINUX: Add CAN driver 2018-01-17 07:24:17 -08:00
Alexey Bulatov 09de8e852d AP_HAL: Make methods get_UAVCAN and set_UAVCAN pure 2018-01-17 07:24:17 -08:00
Dylan Herman 85e1f9f9f6 AP_SmartRTL: attempts to set home in update 
update will continuously attempt to set SmartRTL home as long as
position is ok and home has not be set. Updated examples to use set_home.
 2018-01-17 11:03:33 +09:00
Andrew Tridgell 8fea99e1da HAL_Linux: use calloc in preferance to malloc 2018-01-17 11:22:05 +11:00
Andrew Tridgell 3f5534eed5 AP_HAL: use calloc in preferance to malloc 2018-01-17 11:22:05 +11:00
Andrew Tridgell f6138e3c91 HAL_ChibiOS: use calloc in preferance to malloc 2018-01-17 11:22:05 +11:00
Andrew Tridgell 20d75f52c2 AP_Compass: use calloc in preferance to malloc 2018-01-17 11:22:05 +11:00
Andrew Tridgell c9deabc283 DataFlash: use calloc in MAVLink backend 2018-01-17 11:22:05 +11:00
Andrew Tridgell 8dae3fe59b HAL_ChibiOS: use calloc for malloc type 
this is not strictly necessary on ChibiOS as we already override
malloc, but will keep static analysis happy
 2018-01-17 11:22:05 +11:00
Andrew Tridgell a99b690d49 HAL_PX4: use calloc for malloc_type() 
this ensures that EKF memory is zero on start
 2018-01-17 11:22:05 +11:00
Andrew Tridgell 4322ef7ca4 AP_HAL: prevent valgrind errors in EKF 
ensure that EKF memory is zero on start
 2018-01-17 11:22:05 +11:00
Randy Mackay 094620bc8a AC_WPNav: pass dt to avoidance 2018-01-16 12:13:48 +09:00
Leonard Hall f48b14b810 AC_Avoidance: accept dt and pass to sqrt controller 2018-01-16 12:13:48 +09:00
Leonard Hall b9ed8b292a AC_PosControl: pass dt to att control sqrt_controller 2018-01-16 12:13:48 +09:00
Leonard Hall 62cc25022c AC_AttitudeControl: protect against overshoot in sqrt controller 2018-01-16 12:13:48 +09:00
Leonard Hall 75de0cb4ef AC_AttitudeControl: sqrt_controller accepts dt 2018-01-16 12:13:48 +09:00
Leonard Hall 0a10deb3f7 AP_Motors: Fix gain scaling on Throttle Average Max and reduce additional gain on low throttle for Single and Coax. 2018-01-16 11:50:30 +09:00
Andrew Tridgell 7ca3b56886 HAL_ChibiOS: fixed STM32F405 typos 2018-01-16 09:46:30 +11:00
Andrew Tridgell b6f3db44d8 DataFlash: log health and primary for airspeed 2018-01-16 07:14:20 +11:00
Andrew Tridgell 5846558b0e AP_Baro: moved constants to AP_Math/definitions.h 2018-01-16 07:14:20 +11:00
Andrew Tridgell ee1fea55ce AP_Math: moved constants from AP_Baro 2018-01-16 07:14:20 +11:00
Andrew Tridgell 8bb0ad7f3a AP_Arming: check all airspeed sensors are healthy 2018-01-16 07:14:20 +11:00
Andrew Tridgell bbcda11afe DataFlash: log both airspeed sensors 2018-01-16 07:14:20 +11:00
Andrew Tridgell 58b0ac07ec AP_Airspeed: support dual airspeed sensors 
allow for a primary and secondary airspeed sensor
 2018-01-16 07:14:20 +11:00
rde-mato 87e3777f67 AP_Airspeed: added SDP3X airspeed sensor driver 2018-01-16 07:14:20 +11:00
rde-mato 787420931e AP_Baro: make AP_Baro a singleton 
for AP_Airspeed
 2018-01-16 07:14:20 +11:00
Andrew Tridgell e120e912f1 HAL_ChibiOS: moved board defines to hwdef.dat 2018-01-15 11:46:02 +11:00
Andrew Tridgell d2c04aa649 AP_HAL: moved board defines to hwdef.dat 2018-01-15 11:46:02 +11:00
Andrew Tridgell f8542c86b6 AP_Terrain: added support for AP_Terrain for ChibiOS 2018-01-15 11:46:02 +11:00
Andrew Tridgell 2773b17fad AP_HAL: added support for AP_Terrain for ChibiOS 2018-01-15 11:46:02 +11:00
Andrew Tridgell e2a65c8c60 HAL_ChibiOS: added support for AP_Terrain for ChibiOS 2018-01-15 11:46:02 +11:00
Andrew Tridgell cde930f5c8 HAL_ChibiOS: added skyviper-v2450 hwdef config 2018-01-15 11:46:02 +11:00
Andrew Tridgell c8beddf1e4 HAL_ChibiOS: allow for includes in hwdef.dat files 
this allows creation of derived boards
 2018-01-15 11:46:02 +11:00
Andrew Tridgell 2929b3dbb1 HAL_ChibiOS: allow builds on systems with no SDIO 2018-01-15 11:46:02 +11:00
Andrew Tridgell 7b0eccc309 HAL_ChibiOS: updated skyviper-f412 hwdef.dat 2018-01-15 11:46:02 +11:00
Andrew Tridgell 60a773d045 HAL_ChibiOS: removed duplicate defines 2018-01-15 11:46:02 +11:00
Andrew Tridgell ff87d27143 AP_BoardConfig: fixed return of get_pwm_count() 
thanks to Michael for noticing
 2018-01-15 11:46:02 +11:00
Andrew Tridgell ef1a14cc6c HAL_ChibiOS: fixed 5V analog scale on fmuv4 and mindpx-v2 2018-01-15 11:46:02 +11:00
Andrew Tridgell 867e7ebf71 HAL_ChibiOS: auto-generate GPIO table from hwdef.dat 2018-01-15 11:46:02 +11:00
Andrew Tridgell fbe8166c71 HAL_ChibiOS: auto-generate AnalogIn pin table 2018-01-15 11:46:02 +11:00
Andrew Tridgell f14a847b97 HAL_ChibiOS: rename classes to remove 'Chibi' 
it is redundent as all classes are in ChibiOS namespace, and makes the
code harder to read
 2018-01-15 11:46:02 +11:00
Andrew Tridgell 25b68dc150 HAL_ChibiOS: switch base freq when needed 
timers can't do below 123 Hz with a clock of 8MHz, so we need to
change clock frequency based on the target period
 2018-01-15 11:46:02 +11:00
Andrew Tridgell ff3b0ec1bd AP_IOMCU: added set_default_rate method 2018-01-15 11:46:02 +11:00
Andrew Tridgell 738d70ef02 HAL_ChibOS: fixed handling of disabled channels 2018-01-15 11:46:02 +11:00
Andrew Tridgell 320ada2002 AP_IOMCU: fixed crash with BRD_IO_ENABLE=0 2018-01-15 11:46:02 +11:00
Andrew Tridgell 2978649cd4 waf: moved to generated loader script 2018-01-15 11:46:02 +11:00
Andrew Tridgell 6e4ef32628 HAL_ChibiOS: moved to generated loader script 2018-01-15 11:46:02 +11:00
Andrew Tridgell 9482ab1840 waf: use common makefile for ChibiOS if no custom present 2018-01-15 11:46:02 +11:00
Andrew Tridgell bae9469af7 HAL_ChibiOS: use a common makefile and board.c 
allow for custom files per board if supplied, but don't require them
for every board
 2018-01-15 11:46:02 +11:00
Andrew Tridgell d17e9f321a HAL_ChibOS: fixed mixture of brushed and normal PWM 
allow non-brushed PWM servos with brushed main motors
 2018-01-15 11:46:02 +11:00
Andrew Tridgell c639708e22 HAL_ChibOS: auto-generate full PWM config 
use PWM markers in hwdef.dat to mark each PWM channel
 2018-01-15 11:46:02 +11:00
Andrew Tridgell b741c6c29e AP_Compass: fixed build error on ChibiOS 2018-01-15 11:46:02 +11:00
Andrew Tridgell daa9eec836 HAL_ChibiOS: auto-configure timer channels 
allow for one marked PPMIN for input
 2018-01-15 11:46:02 +11:00
Andrew Tridgell d65ec2ada7 HAL_ChibiOS: moved more headers to common 
allow customisation, but don't require every port to copy the defaults
 2018-01-15 11:46:02 +11:00
Andrew Tridgell 960bc40ff3 HAL_ChibiOS: moved to a common mcuconf.h 2018-01-15 11:46:02 +11:00
Andrew Tridgell 48d2704cf4 HAL_ChibiOS: CS pins don't need to be a single SPI BUS 
its possible to use a CS pin on different buses, so they should not
have a particular bus tag
 2018-01-15 11:46:02 +11:00
Andrew Tridgell a554215576 HAL_ChibiOS: start to cope with not having I2C, SPI and UARTs 2018-01-15 11:46:02 +11:00
Andrew Tridgell f5c8754d75 HAL_ChibiOS: use ARRAY_SIZE_SIMPLE 
this allows for boards without a device type (eg. no SPI bus)
 2018-01-15 11:46:02 +11:00
Andrew Tridgell 7aeab8f5a8 AP_Common: added ARRAY_SIZE_SIMPLE() 
this works with zero length arrays
 2018-01-15 11:46:02 +11:00
Andrew Tridgell 468cadca45 HAL_ChibiOS: auto-generate UART driver declarations 2018-01-15 11:46:02 +11:00
Andrew Tridgell 8e87c30a33 AP_Compass: fixed MindPX-v2 compass orientations 2018-01-15 11:46:02 +11:00
Andrew Tridgell 8ab35e8aca AP_InertialSensor: fixed MindPX-v2 orientation of IMU2 2018-01-15 11:46:02 +11:00
Andrew Tridgell 58796ff435 HAL_Chibios: moved SPI device tables to hwdef.dat 2018-01-15 11:46:02 +11:00
Andrew Tridgell d1f93cd66c HAL_Chibios: auto-generate I2C, SPI and UART device lists 
this is less error prone and make a port faster as more information is
in hwdef.dat
 2018-01-15 11:46:02 +11:00
Andrew Tridgell c80149123f AP_HAL: use hwdef.h for config options in chibios 2018-01-15 11:46:02 +11:00
Andrew Tridgell dcab40459d AP_InertialSensor: support MindPX-v2 2018-01-15 11:46:02 +11:00
Andrew Tridgell 8699b6233a AP_HAL: support MindPX-v2 2018-01-15 11:46:02 +11:00
Andrew Tridgell 36a141f9f1 AP_Compass: support MindPX-v2 2018-01-15 11:46:02 +11:00
Andrew Tridgell 5458377e67 AP_BoardConfig: support MindPX-v2 2018-01-15 11:46:02 +11:00
Andrew Tridgell 51f9f087ab AP_Baro: support MindPX-v2 2018-01-15 11:46:02 +11:00
Andrew Tridgell 280140bf25 HAL_ChibiOS: added support for MindPX-v2 2018-01-15 11:46:02 +11:00
Andrew Tridgell febe414766 AP_InertialSensor: disable fast sampling on 2nd IMU on Pixracer 
it also hosts a mag, and gets lots of FIFO resets if we try to run it
at 8kHz
 2018-01-15 11:46:02 +11:00
Andrew Tridgell 9f5e01d20a HAL_Chibios: fixed FMUv4 compasses 2018-01-15 11:46:02 +11:00
Andrew Tridgell 2646b9ef33 HAL_Chibios: matched debug port speed to NuttX 2018-01-15 11:46:02 +11:00
Andrew Tridgell 41be81af34 HAL_Chibios: added hardware flow control for UARTs 
implement RTS in software and CTS in hardware
 2018-01-15 11:46:02 +11:00
Andrew Tridgell 9916a93919 HAL_ChibiOS: fixed I2C device list 2018-01-15 11:46:02 +11:00
Andrew Tridgell f135e73e04 HAL_ChibiOS: F412 doesn't have CCM ram 2018-01-15 11:46:02 +11:00
Andrew Tridgell 85f4958e4e AP_OpticalFlow: use AP_FEATURE_BOARD_DETECT 2018-01-15 11:46:02 +11:00
Andrew Tridgell 3fc095589c AP_InertialSensor: support ChibiOS FMUv4 2018-01-15 11:46:02 +11:00
Andrew Tridgell 0b6659b36a AP_Baro: support ChibiOS FMUv4 2018-01-15 11:46:02 +11:00
Andrew Tridgell 02c3bea5a5 AP_BoardConfig: support ChibiOS FMUv4 2018-01-15 11:46:02 +11:00
Andrew Tridgell 743714de4c AP_Compass: support ChibiOS FMUv4 2018-01-15 11:46:02 +11:00
Andrew Tridgell c7fd455f6a AP_HAL: added FMUv4 port for ChibiOS 2018-01-15 11:46:02 +11:00
Andrew Tridgell c3435e45c5 HAL_ChibiOS: initial port to FMUv4 2018-01-15 11:46:02 +11:00
bugobliterator 5feef04f5f HAL_ChibiOS: add support for CCM memory 
this uses DMA bounce buffers for bus transfers, and falls back to CCM
ram in allocations if the type is unspecified
 2018-01-15 11:46:02 +11:00
bugobliterator ea2a880d8a AP_NavEKF3: allocate from MEM_FAST region 2018-01-15 11:46:02 +11:00
bugobliterator b1213a522d AP_NavEKF2: allocate NavEKF core from MEM_FAST region 2018-01-15 11:46:02 +11:00
bugobliterator 1c6beaa7c4 AP_InertialSensor: use new API for DMA safe allocation 2018-01-15 11:46:02 +11:00
bugobliterator e591265329 HAL_PX4: change dma_allocate api to malloc_type 2018-01-15 11:46:02 +11:00
bugobliterator 9d6ab78376 AP_HAL: add support for memory allocation by region type 2018-01-15 11:46:02 +11:00
Andrew Tridgell 08346deed5 AP_BattMonitor: run SMBus batteries at 100kHz 
use longer timeouts and SMBUS mode. This fixes the SMBus battery
support for Solo on ChibiOS
 2018-01-15 11:46:02 +11:00
Andrew Tridgell f2102bba05 HAL_VRBrain: fixed I2C get_device() interface 
just stubs for now
 2018-01-15 11:46:02 +11:00
Andrew Tridgell ded22a6766 HAL_PX4: fixed I2C get_device() interface 
just stubs for now
 2018-01-15 11:46:02 +11:00
Andrew Tridgell 43c1bd0ae9 HAL_Linux: fixed I2C get_device() interface 
just stubs for now
 2018-01-15 11:46:02 +11:00
Andrew Tridgell 5e19183e90 HAL_Empty: fixed I2C get_device() interface 2018-01-15 11:46:02 +11:00
Andrew Tridgell 36227aa126 HAL_ChibiOS: implement bus speed and smbus for I2C 
use the slowest speed of all devices on the bus
 2018-01-15 11:46:02 +11:00
Andrew Tridgell 8260b3f65f AP_HAL: allow bus speed and SMBUS enable on I2C 
this allows a driver to request a bus speed for a device, and whether
the device should be in SMBUS mode. It also allows a min timeout to be
specified, to allow for slow devices
 2018-01-15 11:46:02 +11:00
Andrew Tridgell 4b5e617673 HAL_ChibiOS: added missing DMA table for STM32F405 2018-01-15 11:46:02 +11:00
Peter Barker f3d46506b0 AP_HAL_Chibios: warning fixes 2018-01-15 11:46:02 +11:00
Andrew Tridgell 791edee0ff HAL_Chibios: added more SPI devices for FMUv3 2018-01-15 11:46:02 +11:00
Andrew Tridgell ddf8523c2b AP_OpticalFlow: prevent crash on bad device name 2018-01-15 11:46:02 +11:00
Andrew Tridgell 755eca31c2 HAL_Chibios: don't unregister shared DMA 
the shared DMA handle is a property of the bus, not the device, so
should not be unregistered when the device is removed
 2018-01-15 11:46:02 +11:00
Andrew Tridgell 9812fc9574 HAL_Chibios: prevent creation of i2c devices on invalid bus 2018-01-15 11:46:02 +11:00
Andrew Tridgell 82b5b94e24 AP_IOMCU: fixed race condition on thread startup 
thread_ctx may not be set for first trigger_event()
 2018-01-15 11:46:02 +11:00
Andrew Tridgell b62773bbad HAL_ChibiOS: improved auto-config of ADC pins 
ADC config now based on pin_scaling array
 2018-01-15 11:46:02 +11:00
Andrew Tridgell 1cc4b92b76 HAL_ChibiOS: added additional FMUv3 analog pins 2018-01-15 11:46:02 +11:00
Andrew Tridgell aa2175ec0c HAL_ChibiOS: show ADC1 channels in hwdef.h 2018-01-15 11:46:02 +11:00
Andrew Tridgell 5a7e2f75d1 HAL_ChibiOS: added ADC1_Map to STM32 tables 2018-01-15 11:46:02 +11:00
Andrew Tridgell 3a004adbd4 HAL_Chibios: use macro for NUM_GROUPS 2018-01-15 11:46:02 +11:00
Andrew Tridgell b57f8f01c6 HAL_Chibios: fixed return for read on invalid gpio pin 2018-01-15 11:46:02 +11:00
Andrew Tridgell 82cc36d6d0 AP_BoardConfig: called board_setup() even without autodetect 
we need to init hal.rcou and hal.gpio
 2018-01-15 11:46:02 +11:00
Andrew Tridgell b1ebbd1a1c AP_BoardConfig: enable auto-detect only on FMUv3 
F412 should not do board detection
 2018-01-15 11:46:02 +11:00
Andrew Tridgell 7971f03bde Hal_Chibios: fixed F412 SPI config 2018-01-15 11:46:02 +11:00
Andrew Tridgell 51512ed7c0 AP_Param: don't panic on bad embedded parameters 
this makes life much easier for vendors
 2018-01-15 11:46:02 +11:00
Andrew Tridgell 21f40da510 HAL_Chibios: align GPIO pins with px4 build 2018-01-15 11:46:02 +11:00
Andrew Tridgell 60b1eab06d AP_BoardConfig: added get_pwm_count() 2018-01-15 11:46:02 +11:00
Andrew Tridgell 26d6947bf6 HAL_ChibiOS: fixed PWM output 2018-01-15 11:46:02 +11:00
Andrew Tridgell e88fe93688 AP_BoardConfig: init chibios IO after boardconfig 
this allows for the init to use parameters such as BRD_IO_ENABLE from
AP_BoardConfig
 2018-01-15 11:46:02 +11:00
Andrew Tridgell c742543565 HAL_Chibios: align SPI device IDs with px4 IDs 
this makes for easier update to ChibiOS without redoing accelcal
 2018-01-15 11:46:02 +11:00
Andrew Tridgell 7cb1c0420a AP_BoardConfig: include BRD_IO_ENABLE on ChibiOS 2018-01-15 11:46:02 +11:00
Andrew Tridgell 4ce696a520 AP_Math: fixed example build on ChibiOS 2018-01-15 11:46:02 +11:00
Andrew Tridgell 347c774665 AP_HAL: fixed example build on ChibiOS 2018-01-15 11:46:02 +11:00
Andrew Tridgell 2941afa62b AP_Beacon: fixed example build on ChibiOS 2018-01-15 11:46:02 +11:00
Andrew Tridgell f5b24a3838 AP_Math: fixed build of Sub with ChibiOS 2018-01-15 11:46:02 +11:00
Andrew Tridgell 6dbab450a5 Hal_Chibios: use AP_BoardConfig::io_enabled() 2018-01-15 11:46:02 +11:00
Andrew Tridgell 13f4780815 AP_BoardConfig: make a singleton 
allows for io_enabled() static function
 2018-01-15 11:46:02 +11:00
Andrew Tridgell 340d85642e AP_Gripper: build fix for ChibiOS 2018-01-15 11:46:02 +11:00
Andrew Tridgell c0c4021605 SRV_Channels: fix for replay 2018-01-15 11:46:02 +11:00
Andrew Tridgell d0d6040b3e AP_Param: use wider range of sentinal values 
this copes better with power off while writing parameters
 2018-01-15 11:46:02 +11:00
bugobliterator be4e9f27f7 AP_Module: restrict module related headers to systems that can use it 2018-01-15 11:46:02 +11:00
Andrew Tridgell 3d2c4ffa79 AP_Math: allow write to indexed vector2 2018-01-15 11:46:02 +11:00
Andrew Tridgell f088c3de23 AP_Math: added long templates 2018-01-15 11:46:02 +11:00
Andrew Tridgell c62dbcdb62 HAL_PX4: allow for printf from multiple threads 
this is useful for hal.console
 2018-01-15 11:46:02 +11:00
Andrew Tridgell 979ee67c19 HAL_PX4: cope with failed flash writes 
we need to recover from possible bad flash
 2018-01-15 11:46:02 +11:00
Andrew Tridgell 86fbdcd060 HAL_ChibiOS: ensure malloc returns zeroed memory 2018-01-15 11:46:02 +11:00
Andrew Tridgell e255f07022 GCS_MAVLink: rename ch variable 
avoid conflict with ch variable from ChibiOS
 2018-01-15 11:46:02 +11:00
Andrew Tridgell 43a6ed4099 DataFlash: support ChibiOS FATFS implementation 2018-01-15 11:46:02 +11:00
Andrew Tridgell 3cd5386a7e AP_OpticalFlow: support ChibiOS 2018-01-15 11:46:02 +11:00
Andrew Tridgell 3b5f66fd9f AP_FlashStorage: fixed size of flash storage 2018-01-15 11:46:02 +11:00
Andrew Tridgell 0bfbc4bf72 AP_FlashStorage: added re_initialise() API 2018-01-15 11:46:02 +11:00
Andrew Tridgell d1fd843539 AP_IOMCU: support IMU heater 2018-01-15 11:46:02 +11:00
Andrew Tridgell 1568f578d7 AP_IOMCU: added retries on event failure 2018-01-15 11:46:02 +11:00
Andrew Tridgell 9b9b4a169e AP_IOMCU: fixed build on systems without IO MCU 2018-01-15 11:46:02 +11:00
Andrew Tridgell 71a47303b4 AP_IOMCU: support servo voltage and rssi 2018-01-15 11:46:02 +11:00
Andrew Tridgell bb3ed9d6a3 AP_IOMCU: added APIs for RC input 2018-01-15 11:46:02 +11:00
Andrew Tridgell ceeade5822 AP_IOMCU: added periodic reading of RC input 2018-01-15 11:46:02 +11:00
Andrew Tridgell 06322da4e2 AP_IOMCU: added setting of output rates 2018-01-15 11:46:02 +11:00
Andrew Tridgell 39f60adcd7 AP_IOMCU: initial implementation of PWM and safety 2018-01-15 11:46:02 +11:00
Andrew Tridgell 0c01ae1223 AP_IOMCU: started on MCU IO library 2018-01-15 11:46:02 +11:00
Andrew Tridgell f37d1e3363 AP_RAMTRON: added RAMTRON fram device driver 
for parameter storage on most stm32 boards
 2018-01-15 11:46:02 +11:00
Andrew Tridgell 39362a81ae AP_InertialSensor: support ChibiOS 2018-01-15 11:46:02 +11:00
Andrew Tridgell 391affc02d AP_HAL: support ChibiOS 2018-01-15 11:46:02 +11:00
Andrew Tridgell 5d9fa7f85b AP_Compass: support ChibiOS 2018-01-15 11:46:02 +11:00
Andrew Tridgell c8c563f90d AP_Baro: support ChibiOS 2018-01-15 11:46:02 +11:00
Andrew Tridgell f8bea3af14 AP_BattMonitor: support ChibiOS 2018-01-15 11:46:02 +11:00
Andrew Tridgell accac344f2 AP_BoardConfig: support ChibiOS as well as NuttX 
allow for board detection with ChibiOS
 2018-01-15 11:46:02 +11:00
Andrew Tridgell 8b6bab7b17 HAL_Chibios: added ChibiOS HAL 
this is based on initial work by Sid, reset here for easier merging
 2018-01-15 11:46:02 +11:00
Michael du Breuil 8ef7e61066 AP_HAL_SITL: Spam u-blox NAV-SVINFO at 0.1Hz 
This resolves EKF3 being hung on launch
 2018-01-13 10:13:00 +09:00
Leonard Hall eb6ab53f6c AP_Motors: fix optimum thrust calcs 2018-01-13 10:06:11 +09:00
Randy Mackay 4d0c24f4eb AC_WPNav: RFND_USE param desription update 2018-01-12 16:50:00 +09:00
Leonard Hall cddd815a75 AC_AttitudeControl: comment thrust_heading_rotation_angles 
non-functional change
 2018-01-12 15:20:47 +09:00
Randy Mackay 86cbc445bd AP_Compass: ICM20948 default rotation to Pitch180Yaw90 2018-01-12 08:16:41 +09:00
Randy Mackay 5e90cdbf59 AR_AttitudeControl: parameter desc range increase 
new steering controller can use higher FF and zero P
 2018-01-12 08:15:34 +09:00
Leonard Hall 3e0c24adf9 AC_PosControl: remove out-of-date comments 2018-01-11 21:18:34 +09:00
Peter Barker 18d7d3f038 DataFlash: add missing FALLTHROUGH declarations 2018-01-11 13:23:06 +09:00
Dr.-Ing. Amilcar Do Carmo Lucas 596119bca3 GCS_MAVLink: do not use hardcoded array sizes 2018-01-11 09:52:13 +11:00
Dr.-Ing. Amilcar Do Carmo Lucas 24ad9e9dff GCS_MAVLink: Adapt to upstream mavlink changes in autopilot_version message 2018-01-11 09:52:13 +11:00
Tom Pittenger 36f06d3576 AP_InertialSensor: remove AP_InertialSensor_UserInteract 
leftover dead code from when CLI was removed
 2018-01-11 08:11:07 +11:00
Peter Barker 8d7c710e9b GCS_MAVLink: panic in SITL if unknown message sent 2018-01-10 19:11:15 +00:00
Michael du Breuil 5fedc65efb AP_Airspeed: Allow specifying the MS5525 address 2018-01-10 17:49:35 +00:00
Andrew Tridgell e5813effff RC_Channel: improved efficiency of min_max_configured 
this is quite a costly function due to scan in AP_Param. It takes
about 4 to 5 milliseconds when done as part of AP_Arming
 2018-01-10 16:42:51 +09:00
Peter Barker 404e395880 DataFlash: avoid declarations of SITL-only functions 2018-01-09 23:21:58 +00:00
Peter Barker fd0aa3c659 DataFlash: add validation for Log_Write parameters 2018-01-09 23:21:58 +00:00
Peter Barker 5070628230 DataFlash: factor out validate_structure 2018-01-09 23:21:58 +00:00
mirkix 8d7000db2c AP_HAL_Linux: fix typo 2018-01-09 12:54:03 -08:00
Michael du Breuil 9e37e9ee82 AP_GPS: Remove unused blending function. 
Thanks to ender-chen for noticing, closes #7510
 2018-01-09 12:52:32 -08:00
Peter Barker c8e0ae6890 AC_Fence: adjust fence sys_status failed based on position and parameters 2018-01-09 17:15:19 +00:00
Peter Barker e30a6bbce3 AC_Fence: rename sys_status methods from geofence_ to sys_status_ 2018-01-09 17:15:19 +00:00
Peter Barker a5aafab7ff AC_Fence: use pre-arm checks for sanity checks 
Magically resetting people's parameters not a great look.
 2018-01-09 17:15:19 +00:00
Peter Barker 155407956c AC_Fence: add a pre-arm check for polygon fence validity 
Also change SYS_STATUS bit to be unhealthy if boundary invalid
 2018-01-09 17:15:19 +00:00
Peter Barker aba525e4c5 GCS_Console: remove GCS_Console 2018-01-09 13:46:22 +00:00
Dr.-Ing. Amilcar Do Carmo Lucas f6ab044161 GCS_MAVLink: add microseconds since boot to the home and origin Mavlink messages 2018-01-09 13:01:05 +11:00
Dr.-Ing. Amilcar Do Carmo Lucas 479d4be3fd AP_GPS: Add horizontal, vertical and speed accuracy to the GPS_RAW_INT message 2018-01-09 13:01:05 +11:00
Hiroshi Takey (hiro2233) aa6f66f29b AP_Motors: Updated Motor example. 2018-01-09 08:12:01 +09:00
Randy Mackay 1bb18bc941 AR_AttitudeControl: get_throttle_out_speed uses timeout definition 2018-01-05 13:33:21 +09:00
Randy Mackay 4ac5ef3a13 AR_AttitudeControl: allow filter to be zero 
Also increase default filter to 50hz
 2018-01-05 13:33:21 +09:00
Randy Mackay 16d3e5c00d AR_AttitudeControl: add feed foward for speed and steering rate control 2018-01-05 13:33:21 +09:00
Randy Mackay 40bb2b0ad9 AR_AttitudeControl: set throttle speed pid dt 2018-01-05 13:33:21 +09:00
Randy Mackay 9930550cfc AR_AttitudeControl: lengthen timeout to 200ms 
This is required because occasionally the turn rate controller can be disabled for just over 100ms as new navigation commands are loaded
 2018-01-05 13:33:21 +09:00
Randy Mackay a2b1807ca0 AR_AttitudeControl: fix turn-rate controller timeout 2018-01-05 13:33:21 +09:00
Randy Mackay 4e8155f4e5 AC_PID: allow non-zero ff gain default 2018-01-05 13:33:21 +09:00
Randy Mackay 1531801c83 AP_WheelEncoder: minor comment fix 2018-01-04 14:08:17 +09:00
Matt b5bdaa18ac AP_AVOIDANCE: Minimum altitude for avoidance action 2017-12-30 13:50:42 -08:00
dheideman 521bece9e7 AP_JSButton: Add servo toggle button function 2017-12-28 14:14:47 -05:00
dheideman 307638e8af AP_JSButton: Add momentary servo button function 2017-12-28 14:14:47 -05:00
dheideman dd239183c1 AP_JSButton: Add momentary relay button function 2017-12-28 14:14:47 -05:00
Peter Barker 588b0c17c8 AC_Fence: remove AC_FENCE_TYPE_NONE define 
0 is the appropriate value for a bitmask which is empty
 2017-12-28 15:38:37 +00:00
Peter Barker aa482bae40 AC_Fence: remove argument to check() 
Also, rename check_fence() to check()
 2017-12-28 15:38:37 +00:00
Andrew Tridgell 55f73f4163 AP_Airspeed: fixed timing errors in MS5525 driver 
this fixes issue #7188, where we could read from the MS5525 sensor too
soon after requesting data and the result coming back would be garbage
 2017-12-27 11:05:54 -08:00
mirkix 4b1ec08eaf AP_BattMonitor: add new board PocketPilot 2017-12-27 16:01:55 +00:00
mirkix 0926802013 AP_Notify: add new board PocketPilot 2017-12-27 16:01:55 +00:00
mirkix 9b6a826b49 AP_HAL_linux: add new board PocketPilot 2017-12-27 16:01:55 +00:00
mirkix 0e7ade6f0c AP_HAL: add new board PocketPilot 2017-12-27 16:01:55 +00:00
Pierre Kancir 8c8767e964 AP_InertialSensor: reduce QURT include scope 2017-12-27 15:13:30 +00:00
Pierre Kancir 14b5c8a6c4 AP_Baro: don't include vehicle specific baro by default 2017-12-27 15:13:30 +00:00
Peter Barker a35e86c2fd AP_SmartRTL: AP_AHRS no longer requires GPS in constructor 2017-12-27 00:58:02 +00:00
Peter Barker 7646e09349 AP_OpticalFlow: AP_AHRS no longer requires GPS in constructor 2017-12-27 00:58:02 +00:00
Peter Barker e584a90c81 AP_Module: AP_AHRS no longer requires GPS in constructor 2017-12-27 00:58:02 +00:00
Peter Barker 89d3289400 AP_Mission: AP_AHRS no longer requires GPS in constructor 2017-12-27 00:58:02 +00:00
Peter Barker 5dc714bf5f AP_NavEKF3: use GPS singleton 2017-12-27 00:58:02 +00:00
Peter Barker 9c8466dc03 AP_NavEKF2: use GPS singleton 2017-12-27 00:58:02 +00:00
Peter Barker aea460df2c AP_FrSky: use GPS singleton 2017-12-27 00:58:02 +00:00
Peter Barker e15442355a AP_AHRS: use GPS singleton 2017-12-27 00:58:02 +00:00
Peter Barker ca4f25a78e AP_Terrain: use GPS singleton 2017-12-27 00:58:02 +00:00
Peter Barker fb3cba3867 AP_Mount: use GPS singleton 2017-12-27 00:58:02 +00:00
Peter Barker a4584431a2 AP_Landing: use GPS singleton 2017-12-27 00:58:02 +00:00
Peter Barker d1d5a484ce AP_ADSB: use GPS singleton 2017-12-27 00:58:02 +00:00
Peter Barker e0c586876b APM_Control: use GPS singleton 2017-12-27 00:58:02 +00:00
Hiroshi Takey (hiro2233) fb5b6f2169 AP_Airspeed: Updated Airspeed example. 2017-12-26 14:57:58 +00:00
Peter Barker dea15892dc AP_Volz_Protocol: use AP::serialmanager() 2017-12-21 04:35:11 +00:00
Peter Barker b3f5e807a6 AP_SerialManager: add AP::serialmanager() 2017-12-21 04:35:11 +00:00
Pierre Kancir 6728598099 AP_Rangefinder: don't include Bebop rangefinder by default 2017-12-21 04:13:09 +00:00
Pierre Kancir be96a27fa8 AP_NavEKF3: only report terrain estimator innovations with valid rng value 2017-12-18 22:51:46 +00:00
Pierre Kancir 171e80d8dc AP_NavEKF2: only report terrain estimator innovations with valid rng value 2017-12-18 22:51:46 +00:00
khancyr 2732226664 AP_AHRS: use direct assignation and correct some style 2017-12-18 22:43:59 +00:00
khancyr dae636b39e AP_AHRS: correct some constcorrectness 2017-12-18 22:43:59 +00:00
khancyr d89d496c8f AP_AHRS: make getter const 2017-12-18 22:43:59 +00:00
mirkix eecd8fcfa6 AP_HAL_Linux: Add VOLTAGE_SCALING for BeagleBone Blue 2017-12-19 09:17:06 +11:00
Andrew Tridgell 4ac49483c8 AP_Param: added support for embedded parameters 
use a block of flash to hold embedded parameters that can be changed
using apj_tool.py
 2017-12-18 11:14:59 +11:00
Peter Barker 738377c089 AP_Arming: remove airspeed arming check bits from non-plane vehicles 2017-12-16 11:08:35 +11:00
Peter Barker 0f94fde434 AC_Fence: get home distance directly from ahrs 2017-12-15 01:42:49 +00:00
Peter Barker 20e295c23a AC_Fence: check supplied location within fence rather than current loc 2017-12-15 01:24:13 +00:00
Peter Barker dff27ec506 AC_WPNav: correct call for getting location vector 
Function has been renamed and only takes a Vector2f
 2017-12-15 01:24:13 +00:00
Peter Barker 302e5c6871 AP_Common: have get_vector_xy_from_origin_NE take a Vector2f rather than 3f 
Also, rename it from get_vector_xy_from_origin_NED
 2017-12-15 01:24:13 +00:00
mirkix 26f3a62db7 AP_HAL_Linux: remove BBBmini from RCInput_PRU.cpp 2017-12-14 12:40:37 -08:00
Mark Whitehorn f57eab3482 AP_SerialManager: add Volz and Sbus protocols to param metadata 2017-12-14 19:27:02 +00:00
ChristopherOlson 569f55f5c6 AC_AttitudeControl:TradHeli - fix for alt_hold angle limiter active at hover collective in Traditional Helicopters 
add definition for max collective/throttle for helicopters that compensates for negative collective pitch range
and sets proper collective overhead before alt_hold angle limiter becomes effective
 2017-12-14 20:46:13 +09:00
Andrew Tridgell 1c503ee459 SRV_Channel: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell fd14dedcff DataFlash: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell 15026c6898 AP_Volz_Protocol: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell d175fb2f18 AP_Terrain: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell b6ecce8329 AP_TECS: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell 003851a5c1 AP_SmartRTL: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell 1cdbb09466 AP_ServoRelayEvents: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell dd489a0797 AP_SerialManager: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell 580af4a69a AP_Scheduler: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell dec3a27d91 AP_SBusOut: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell 076f7bc0cf AP_RSSI: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell 9b4fef4d50 AP_RPM: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell 16cd31b63a AP_Relay: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell e9b847b5ee AP_RCMapper: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell ffced7d591 AP_RangeFinder: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell 7122cae589 AP_Rally: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell e798b38271 AP_Parachute: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell 0d4dca0394 AP_OpticalFlow: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell cd51c71857 AP_Notify: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell c13eaf0c7f AP_NavEKF3: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell 4d4e66d825 AP_NavEKF2: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell 3d2c81ff05 AP_Mount: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell c72c1de99e AP_Module: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell a3e07f66a1 AP_Mission: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell 1dac512567 APM_Control: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell 5f4680bf2c AP_LeakDetector: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell 645508224f AP_Landing: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell ad99b04de7 AP_LandingGear: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell 31092da426 AP_L1_Control: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell 99499dece2 AP_InertialSensor: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell d2c9e2719e AP_GPS: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell c618a27ee0 AP_Frsky_Telem: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell f326377a5c AP_Compass: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell 573a5bf3d0 AP_Camera: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell a4d2d79ce7 AP_BoardConfig: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell ca91edbbeb AP_Beacon: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell a4c56fcb82 AP_BattMonitor: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell 68f8817e97 AP_Baro: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell 8c1cf9affe AP_Airspeed: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell 0ccaa5bcba AP_AHRS: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell 6487a22acd AP_ADSB: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell 85f9fecd24 AC_Sprayer: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell 9ba8097502 AC_PrecLand: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell 25c409d4a2 AC_InputManager: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell 25b9a7e711 AC_Fence: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell d5c55e0dfe AC_Avoidance: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell 7a6ab4ac44 AP_AHRS: fixed a bug with startup ordering of SITL 
this fixes a crash that can happen with SITL
 2017-12-13 14:09:39 +11:00
Peter Barker 86fe1671c1 AC_Fence: fix comment 2017-12-13 10:04:50 +09:00
Peter Barker e8151a7ec1 AC_Fence: require home as well as origin for prearm checks 2017-12-13 10:04:50 +09:00
Peter Barker 1ecfdffa76 AC_Fence: methods to help populate SYS_STATUS 2017-12-13 10:04:50 +09:00
Peter Barker ac3f030a34 AC_Fence: factor out check_fence_alt_max 
NFC
 2017-12-13 10:04:50 +09:00
Peter Barker d04a4dd0f8 AC_Fence: factor out check_fence_circle 
NFC
 2017-12-13 10:04:50 +09:00
Peter Barker d379c7bbd9 AC_Fence: factor out check_fence_polygon 
NFC
 2017-12-13 10:04:50 +09:00
Peter Barker 5eeed442c8 AP_AHRS: correct comment 2017-12-13 10:04:50 +09:00
Peter Barker 518399c13a AC_Fence: stop looking at EKF filter status 
Fence has no business looking at what the filter status is.

Fence should only care whether it can currently get a position.
 2017-12-13 10:04:50 +09:00
khancyr 65373b85f0 AC_Fence: replace AP_InertialNav by AHRS 2017-12-13 10:04:50 +09:00
priseborough 3b32d583a9 AP_NavEKF2: Fix delta time use error 2017-12-12 11:39:38 +11:00
priseborough 440d361aff AP_NavEKF2: Limit range of delta times 2017-12-12 11:39:38 +11:00
Andrew Tridgell 6b30c9213a AP_NavEKF3: delay startup until IMU buffer is filled 
this prevents a vulnerability where the initial IMU data is processed
26 times (where 26 is the IMU buffer length)
 2017-12-12 11:39:38 +11:00
Andrew Tridgell 1f9a3dd1bd AP_AHRS: improved init attitdue in DCM 
this tries harder to get a good IMU sample for the initial attitude
estimate. I have seen cases of bad IMU data on startup and this makes it
much less likely
 2017-12-12 11:39:38 +11:00
Andrew Tridgell 97729a12f0 AP_NavEKF2: don't run IMU updates until buffer fills 
this prevents us using bad initial data multiple times. It fixes a bug
where the IMU may pause during EK2 initialisation
 2017-12-12 11:39:38 +11:00
Andrew Tridgell 39c206ca03 AP_InertialSensor: limit delta-time from INS 
limit delta-time to 2x average time

DEBUG CODE - DO NOT MERGE
 2017-12-12 11:39:38 +11:00
Andrew Tridgell a0af4af5b5 AP_InertialSensor: debugging code for EK2 bug 2017-12-12 11:39:38 +11:00
Randy Mackay 38145f9541 AP_InertialSensor: fix param docs for notch and log settings 2017-12-12 07:59:41 +09:00
Randy Mackay cabced82f1 AR_AttitudeControl: fix parameter descriptions 2017-12-11 17:01:18 +09:00
Michael Oborne 78f732c380 AR_AttitudeControl: fix parameter docs 2017-12-11 08:35:33 +09:00
Randy Mackay 744f4baf22 AR_AttitudeControl: add parameter description increment 2017-12-09 16:23:25 +09:00
Randy Mackay f00f4ce79b AR_AttitudeControl: fix get_desired_speed timeout 2017-12-09 16:23:22 +09:00
Randy Mackay 9b81c133f6 AP_HAL_PX4: fix compiler warning in UARTDriver 2017-12-09 12:18:49 +09:00
Randy Mackay 36c5f057ae AR_AttitudeControl: add get_desired_turn_rate lat_accel and speed 
for reporting use only
 2017-12-09 12:18:49 +09:00
Andrew Tridgell 30944f60e6 AP_SBusOut: fixed param doc name 2017-12-09 08:31:24 +11:00
Andrew Tridgell 051f30990c SRV_channel: fixed doc names of VOLZ and SBUS 
thanks to Mark for noticing
 2017-12-09 08:08:00 +11:00
Peter Barker c4734484e7 AC_Avoid: take an AP_AHRS in place of an AP_AHRS_NavEKF 2017-12-08 11:27:37 +09:00
Peter Barker 8a4ab685c7 AP_AHRS: implement get_hgt_ctrl_limit on base class 
If no limits are required false can be returned, so an trivial
implementation is possible
 2017-12-08 11:27:37 +09:00
Peter Barker 89e12163cd AP_AHRS: correct comment 2017-12-08 11:27:37 +09:00
Peter Barker c3eff57f60 AP_InertialNav: remove unused get_hgt_ctrl_limit 2017-12-08 11:27:37 +09:00
Peter Barker a1c982be4a AC_Avoid: work in metres to avoid extra work 2017-12-08 11:27:37 +09:00
Peter Barker 0fe45ef6b6 AC_Avoid: eliminate get_position and get_alt_above_home 2017-12-08 11:27:37 +09:00
Peter Barker 54010451bf AC_Avoid: check result of AHRS calls 
Work in metres to avoid computation
 2017-12-08 11:27:37 +09:00
khancyr b44ba29a05 AC_Avoidance: replace AP_InertialNav by AHRS 2017-12-08 11:27:37 +09:00
Andrew Tridgell 4289190654 HAL_PX4: added LIS3MDL on FMUv4 2017-12-08 09:49:25 +11:00
Mark Whitehorn b0e2f06a7a AP_Compass: add LIS3MDL probe for Pixracer 2017-12-08 09:49:25 +11:00
Dr.-Ing. Amilcar Do Carmo Lucas 9b2e48ce10 AP_GPS: Improve comments (NFC) 2017-12-05 10:44:58 +09:00
Dr.-Ing. Amilcar Do Carmo Lucas fa4427fbce AC_AttitudeControl: Add AC_PosControl::get_bearing_to_target() method 2017-12-05 09:17:15 +09:00
Dr.-Ing. Amilcar Do Carmo Lucas 1a512609ac AC_WPNav: Use the get_bearing_cd() overloaded function provided by AP_Math instead 2017-12-05 08:54:49 +09:00
Dr.-Ing. Amilcar Do Carmo Lucas e13281ab2d AP_Math: add overloaded functions get_horizontal_distance_cm() and get_bearing_cd() (NFC) 2017-12-05 08:54:49 +09:00
Dr.-Ing. Amilcar Do Carmo Lucas 07c8d208bc AC_WPNav: Use DEGX100 define instead of hardcoded value (NFC) 2017-12-05 08:54:49 +09:00
Dr.-Ing. Amilcar Do Carmo Lucas ec1790dad9 AP_Math: Use DEGX100 define instead of hardcoded value (NFC) 2017-12-05 08:54:49 +09:00
Guglie 4eaa1f17df SITL: fix pthread_setname_np to build on mac 2017-12-04 21:14:29 +11:00
Tom Pittenger da11241aa8 AP_HAL_SITL: add const 2017-12-02 09:17:27 +09:00
Patrick José Pereira bd1110f444 AP_JSButton: simplifies logic 
Less code make people happy

Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
 2017-12-01 14:50:15 -08:00
Peter Barker e39e8359b6 GCS_MAVLink: tighten result of handle_preflight_reboot 2017-12-01 17:01:10 +00:00
Peter Barker 161e2145cb AP_InertialSensor: tighten type of simple_accel_cal result 2017-12-01 17:01:10 +00:00
Randy Mackay 82cd320bd0 AP_AHRS: add get_origin method to parent 2017-12-01 09:28:56 +09:00
Andrew Tridgell da4d3ebe2b HAL_SITL: fixed UART utils for cygwin and Linux 2017-12-01 08:02:48 +11:00
Tom Pittenger 6bdbe53024 AP_HAL_SITL: fix compile error for Windows/Cygwin builds 
termios2 not available on cygwin. This needs a re-think for cygwin. For now let's just hide it by letting it be declared empty by the virtual and totally bypass it in the cygwin build.
 2017-11-30 12:17:49 -08:00
Tom Pittenger 013035a4da AP_HAL_SITL: fix compile error for Windows/Cygwin builds 
Can not find "asm/termios.h"
 2017-11-30 12:05:56 -08:00
Tom Pittenger 760c6185e5 AP_HAL_SITL: remove SBUS debug code 2017-11-30 12:03:17 -08:00
Pierre Kancir c30642a348 AP_HAL_SITL: correct _unbuffered_writes usage 2017-11-30 10:36:54 -08:00
Mark Whitehorn b1b1c0218f AP_HAL_PX4: clean whitespace 2017-11-30 10:20:04 +11:00