Dr.-Ing. Amilcar Do Carmo Lucas
8678d13e7b
Copter: Update the result of a MavLink message, this is a NFC
...
The result variable is not used, but at least it gets documented :)
2017-11-27 14:17:21 +09:00
Andrew Tridgell
ef0144751e
Copter: allow THROW_NEXTMODE=LOITER
2017-11-27 14:14:06 +09:00
Andrew Tridgell
311d7c11e4
Copter: added LOITER option in THROW_NEXTMODE
2017-11-27 14:14:06 +09:00
Randy Mackay
020e0bfd40
Copter: fix disable ESC calibration for brushed motors
2017-11-27 13:31:21 +09:00
Andrew Tridgell
650a0e06bd
Copter: disable ESC calibration for brushed motors
2017-11-27 12:28:40 +09:00
Andrew Tridgell
a644cff921
Copter: support testing multiple motors with motortest
...
this matches the quadplane behaviour, allowing a sequence of motors to
be tested
2017-11-27 10:15:31 +09:00
Randy Mackay
8845b6d5b5
Copter: rename control_safe_rtl.cpp to control_smart_rtl.cpp
...
non-functional change
2017-11-23 20:05:01 +09:00
Randy Mackay
58e5b7f458
Copter: 3.5.4 release notes
2017-11-23 12:17:50 +09:00
Peter Barker
dc99a29dfc
ArduCopter: support for units on fields
2017-11-23 10:40:30 +11:00
Randy Mackay
9a03ba1bfb
Copter: move barometer_accumulate to sensors.cpp
...
non-functional change
2017-11-22 17:13:14 +09:00
Andrew Tridgell
23b20307af
Copter: use cork/push wrapper
2017-11-21 14:10:54 +11:00
Randy Mackay
c5141ad87e
Copter: 3.5.4-rc2 release notes
2017-11-17 13:39:20 +09:00
Peter Barker
04c9e966e0
Copter: use AP::PerfInfo library
2017-11-16 15:31:53 +00:00
Peter Barker
5c2f68e8f5
Copter+AP_Scheduler: move perf_info.cpp into Scheduler
2017-11-16 15:31:53 +00:00
Peter Barker
d959e4b42b
Copter: AP_Camera uses GPS singleton
2017-11-16 15:28:37 +00:00
Randy Mackay
8d6d09169f
Copter: rtl uses labs for alt comparison
2017-11-16 09:59:25 +09:00
murata
acfcd9980d
Copter: Modify method name in method header.
2017-11-16 09:26:26 +09:00
Peter Barker
8f48b3187e
Copter: use gps singleton for GCS function
2017-11-15 13:43:03 +00:00
ChrisBird
1f1bb61bfa
Copter: Add PreArm - PID Parameter check
...
This addresses the enhancement requested in: https://github.com/ArduPilot/ardupilot/issues/2424
It checks various PID values to check if they are zero, if they are and the corresponding rate forward feed is zero then it flags it as PreArm failure.
It has been added to the parameter check, so can be overridden if required.
2017-11-15 21:58:24 +09:00
André Kjellstrup
e7a1ceca4c
Copter: Option to trig by distance only when in AUTO mode
2017-11-14 00:10:22 +00:00
ChrisBird
caaeae3d0a
Copter: Separate max ascent and descent speeds
...
Added equivalent parameters to WPNAV_SPEED_UP and WPNAV_SPEED_DN
New parameters named:
PILOT_SPEED_UP (technically renamed PILOT_VELZ_MAX)
PILOT_SPEED_DN
Removed parameter PILOT_VELZ_MAX (technically renamed to PILOT_SPEED_UP).
Flight Modes impacted:
ALTHOLD
AUTOTUNE
CIRCLE
LOITER
POSHOLD
SPORT
TAKEOFF
Update a section in GUIDED mode but I don't think it is ever used but update just in case.
It will use the PILOT_SPEED_UP for ascending max velocity. For down it will check if
it is 0, if so then it will PILOT_SPEED_UP instead, if non zero it will use PILOT_SPEED_DN.
This retains current behavior and gives the flexibility to change it if desired.
2017-11-09 09:03:54 +09:00
Peter Barker
3846da5e23
Copter: remove redundant terrain checks
...
Now taken care of by continuous prearm checks
2017-11-08 19:08:16 +09:00
Peter Barker
d537461934
Copter: remove redundant battery checks
...
Now taken care of by continuous prearm checks
2017-11-08 19:08:14 +09:00
Peter Barker
b3b1680e11
Copter: remove redundant fence checks
...
Now checked as part of continuous prearm
2017-11-08 19:08:12 +09:00
Peter Barker
04af1cb331
Copter: remove redundant baro checks
...
Now checked as part of continuous prearm checks
2017-11-08 19:08:10 +09:00
Peter Barker
b5c907312c
Copter: remove redundant gps checks
...
Now tested as part of continuous pre-arm checks
2017-11-08 19:08:08 +09:00
Peter Barker
d563a9dd5d
Copter: remove redundant INS checks
...
Now checked by continuous prearm checks
2017-11-08 19:08:06 +09:00
Peter Barker
d3b73f8557
Copter: correct notification of pre-arm-gps-check failure
2017-11-08 19:08:03 +09:00
Peter Barker
818faa92d4
Copter: rc calibration checks are called by AP_Arming
2017-11-08 19:07:59 +09:00
Peter Barker
9b52c9b670
Copter: prearm logging checks are called in parent class
2017-11-08 19:07:55 +09:00
Peter Barker
49dd5f4f80
Copter: prearm board voltage checks are called in parent class
2017-11-08 19:07:53 +09:00
Peter Barker
b8802ec5c2
Copter: prearm gps checks are called in parent class
2017-11-08 19:07:51 +09:00
Peter Barker
7c0869fa19
Copter: prearm ins checks are called in parent class
2017-11-08 19:07:49 +09:00
Peter Barker
cb8fa41cb1
Copter: prearm compass checks are called in parent class
2017-11-08 19:07:46 +09:00
Peter Barker
30c1a040d7
Copter: prearm baro checks are called in parent class
2017-11-08 19:07:44 +09:00
Peter Barker
c129445ff6
Copter: call common prearm checks
2017-11-08 19:07:42 +09:00
Peter Barker
7b3e111f85
Copter: continuously run pre-arm checks
...
Stop "latching" the prearm checks, so if the checks start to fail
the craft becomes non-armable.
2017-11-08 19:02:44 +09:00
Randy Mackay
ef05281dc2
Copter: 3.5.4-rc1 release notes
2017-11-08 12:21:46 +09:00
Peter Barker
ef00978662
Copter: add missing disarm-on-land parameter to rtl_land_run
...
Always disarm
2017-11-06 22:58:16 +00:00
Peter Barker
5b793252ed
Copter: stop disarming as part of running rtl as mission item
...
Fixed #6324
Note that the land-as-mission-item code is duplicated from the
rtl-as-mode code but omits the disarm part, so doesn't suffer from the
same bug.
2017-11-06 19:07:28 +00:00
bnsgeyer
6d0cfc13a2
Copter: heli: Update swashplate behavior
...
change swashplate behavior on ground in Acro, Stabilize, and AltHold
flight modes. See discussion here:
https://discuss.ardupilot.org/t/tradheli-swashplate-behavior-while-on-the-ground-and-potential-fix-to-issue-5396/22463/18
2017-10-28 12:31:06 +11:00
Peter Barker
c7216a2740
Copter: call ins periodic function
2017-10-27 16:33:45 +11:00
Randy Mackay
842eed5426
Copter: accept do-winch commands with max rate
2017-10-27 09:20:38 +09:00
Randy Mackay
47bbf49aa6
Copter: fix tuning knob rate control of winch
2017-10-27 09:20:38 +09:00
Randy Mackay
787954fa37
Copter: integrate winch library
...
fixes after peer review:
rename winch-disable to winch-relaxed
add DO_WINCH to do-verify
winch release-length accepts rate
2017-10-27 09:20:38 +09:00
Randy Mackay
2c511b4269
Copter: add AP_Winch and AP_WheelEncoder to build
2017-10-27 09:20:38 +09:00
ChristopherOlson
51c8c1adb2
Copter: TradHeli update comment
...
be consistent with dynamic flight speed definition
2017-10-26 17:15:40 +11:00
ChristopherOlson
572c609cd6
Copter: Trad Heli-change default accel_z_p to 0.30
...
prevents collective cycling in altitude controlled modes
2017-10-26 17:15:40 +11:00
Andrew Tridgell
0d0f1d264b
Copter: fixed order of motor setup
2017-10-22 15:52:50 +11:00
Andrew Tridgell
c4b0d7bc35
Copter: removed calls to motors->enable()
2017-10-22 15:52:50 +11:00
Andrew Tridgell
f49ab44f25
Copter: support simple accel calibration
2017-10-10 10:57:38 +11:00
Andrew Tridgell
e2f710523e
Copter: added inverted flight to switch docs
2017-10-03 10:16:41 +11:00
Andrew Tridgell
951ed95eb9
Copter: support inverted flight CH7 option
2017-10-03 10:16:41 +11:00
Andrew Tridgell
18f04abfe8
Copter: added HELI_QUAD
2017-10-03 10:16:41 +11:00
Michael du Breuil
516709fc72
Copter: Check GPS health
2017-09-27 19:29:32 +01:00
Lucas De Marchi
beabae6a98
global: use static method to construct AP_AHRS_NavEKF
2017-09-26 03:01:21 +01:00
Lucas De Marchi
c9fbf7b722
global: use static method to construct AP_NavEKF3
2017-09-26 03:01:21 +01:00
Lucas De Marchi
e2fe36357a
global: use static method to construct AP_NavEKF2
2017-09-26 03:01:21 +01:00
Lucas De Marchi
6781a44046
global: use static method to construct AP_Avoidance_*
2017-09-26 03:01:21 +01:00
Lucas De Marchi
8f304ed809
ArduCopter: add static create method for AP_Avoidance_*
2017-09-26 03:01:21 +01:00
Lucas De Marchi
6d009cdf6e
global: use static method to construct AP_ADSB
2017-09-26 03:01:21 +01:00
Lucas De Marchi
1263e20a0d
ArduCopter: use static method to construct AC_InputManager
2017-09-26 03:01:21 +01:00
Lucas De Marchi
e21e02cfdb
ArduCopter: use static method to construct AC_PrecLand
2017-09-26 03:01:21 +01:00
Lucas De Marchi
cf6ea9642e
global: use static method to construct AP_Terrain
2017-09-26 03:01:21 +01:00
Lucas De Marchi
70d8a08626
ArduCopter: use static method to construct AP_LandingGear
2017-09-26 03:01:21 +01:00
Lucas De Marchi
31db77e47b
global: use static method to construct AP_Parachute
2017-09-26 03:01:21 +01:00
Lucas De Marchi
57bbb2e1d9
ArduCopter: use static method to construct AC_Sprayer
2017-09-26 03:01:21 +01:00
Lucas De Marchi
eadd650d78
global: use static method to construct AP_RSSI
2017-09-26 03:01:21 +01:00
Lucas De Marchi
4f42facefc
global: use static method to construct AC_Avoid
2017-09-26 03:01:21 +01:00
Lucas De Marchi
b05610870c
global: use static method to construct AP_Rally
2017-09-26 03:01:21 +01:00
Lucas De Marchi
b4f5256a9e
ArduCopter: add static create method to AP_Rally
2017-09-26 03:01:21 +01:00
Lucas De Marchi
c6eb48009b
global: use static method to construct AC_Fence
2017-09-26 03:01:21 +01:00
Lucas De Marchi
18aa88b329
global: use static method to construct AP_Mount
2017-09-26 03:01:21 +01:00
Lucas De Marchi
c3647f0185
global: use static method to construct AP_Camera
2017-09-26 03:01:21 +01:00
Lucas De Marchi
cc53e7bc4b
global: use static method to construct AP_ServoRelayEvents
2017-09-26 03:01:21 +01:00
Lucas De Marchi
13d7f58036
global: use static method to construct AP_Relay
2017-09-26 03:01:21 +01:00
Lucas De Marchi
9ce6019138
global: use static method to construct AP_Frsky_Telem
2017-09-26 03:01:21 +01:00
Lucas De Marchi
b022c02029
global: use static method to construct AP_BattMonitor
2017-09-26 03:01:21 +01:00
Lucas De Marchi
69b6d95cb2
global: use static method to construct AP_Board_Config{,_CAN}
2017-09-26 03:01:21 +01:00
Lucas De Marchi
a74e700006
global: use static method to construct RCMapper
2017-09-26 03:01:21 +01:00
Lucas De Marchi
72fd2d6f05
global: use static method to construct AP_SerialManager
2017-09-26 03:01:21 +01:00
Lucas De Marchi
fbe0d9761c
global: use static method to construct AP_OpticalFlow
2017-09-26 03:01:21 +01:00
Lucas De Marchi
10529feae6
ArduCopter: use static method to construct AP_Arming_Copter
2017-09-26 03:01:21 +01:00
Lucas De Marchi
b36a5919f5
global: use static method to construct AP_Mission
...
This also move the initialization to be in the header for those that
weren't already to maintain consistency.
2017-09-26 03:01:21 +01:00
Lucas De Marchi
de5e044b02
global: use static method to construct AP_RPM
2017-09-26 03:01:21 +01:00
Lucas De Marchi
40fd1b346c
global: remove rangefinder from AP_AHRS_NavEKF
...
AP_AHRS_NavEKF doesn't use the rangefinder, it just delegates the
calls to the right estimator.
For libraries/AP_AHRS/examples/AHRS_Test/AHRS_Test.cpp the initialization
order has also been modified to match the order on vehicles. It's more
correct since it passes a reference when EKF2/EKF3 are already
constructed, while thos constructors use a pointer. Ideally these
should be moved to an init() method though, or use a get_instance().
2017-09-26 03:01:21 +01:00
Lucas De Marchi
9027a55696
global: use static method to construct RangeFinder
2017-09-26 03:01:21 +01:00
Lucas De Marchi
f5c2ffffb9
global: remove DataFlash from AP_Mount::init()
2017-09-26 03:01:21 +01:00
Lucas De Marchi
53c82b4aaf
global: use static method to construct DataFlash_Class
2017-09-26 03:01:21 +01:00
Lucas De Marchi
62ac0ab8aa
global: use static method to construct AP_Notify
2017-09-26 03:01:21 +01:00
Lucas De Marchi
de680dac5b
global: use static method to construct AP_Scheduler
2017-09-26 03:01:21 +01:00
Lucas De Marchi
8094482f21
global: use static method to construct AP_GPS
2017-09-26 03:01:21 +01:00
Lucas De Marchi
87b30b4552
global: use static method to construct AP_InertialSensor
2017-09-26 03:01:21 +01:00
Lucas De Marchi
c1a957fbf3
global: use static method to construct Compass
2017-09-26 03:01:21 +01:00
Lucas De Marchi
91feec0e14
global: use static method to construct AP_Baro
2017-09-26 03:01:21 +01:00
Lucas De Marchi
d213ccbbfc
ArduCopter: protect version.h from inclusion and use ap_version.h
2017-09-23 21:37:45 -07:00
Lucas De Marchi
4ef5186733
ArduCopter: do not include version.h/ap_version.h
...
The interface provided by each vehicle should be used to get the
version.
2017-09-23 21:37:45 -07:00
Lucas De Marchi
cd5b018d82
ArduCopter: move version to a static member
...
We should never include version.h or ap_version.h headers directly
on a header since this will trigger a complete rebuild of the
codebase when we commit to the repository. The ap_version.h header
is auto-generated containing information from the current commit.
If we include it in a header, every other file that ends up including
that header (directly or indirectly) will need to be rebuilt. No
ccache's cache beats having to do nothing when the header is just
not included.
version.h contains information that is kept on a struct inside
each vehicle. Rather than using the macros from each vehicle,
the getter should be preferred, which returns an AP_FWVersion
referente.
2017-09-23 21:37:45 -07:00
Randy Mackay
a9f257ddc6
Copter: 3.5.3 release notes
2017-09-21 11:13:02 +09:00
Andrew Tridgell
22bfec4d2a
Copter: fixed motor runup check for heli
...
for all auto-throttle modes we should not allow a mode change to the
mode if the motor runup is not complete.
This moves the code to the set_mode() so it applies to all modes
fixes issue #6956
2017-09-21 08:52:50 +10:00
Andrew Tridgell
8cf8f3a288
Copter: fixed collective input with H_SV_MAN=1 for heli
...
when H_SV_MAN=1 we do direct pass-thru so the user can test swash
range. The problem is that it uses norm_input() for throttle, which
depends on RC3_TRIM. Nowhere else in heli or copter do we depend on
RC3_TRIM, so the user gets a misleading idea of behaviour when testing
their swash.
2017-09-21 08:52:50 +10:00
Randy Mackay
a8a5c1d332
Copter: command-long DO_SET_HOME check first param is zero
...
Also do not use current location just because lat,lon,alt are all zero
2017-09-20 12:14:38 +09:00
Randy Mackay
d982cfed4a
Copter: accept DO_SET_HOME within COMMAND_INT
2017-09-20 12:14:38 +09:00
Randy Mackay
70cf21a5ba
Copter: accept more mav-frame types
...
accept mav frames whether or not they have _INT appended
2017-09-20 12:14:38 +09:00
Peter Barker
45d056fcf0
Copter: ekf position checks are done before we call failsafe_ekf_event
2017-09-19 12:44:43 +01:00
Peter Barker
d5caff3f1b
Copter: do not enter ekf-failsafe based on position if pos not needed
2017-09-19 12:44:43 +01:00
Peter Barker
ff82f23cf6
Copter: factor out a ekf_check_position_problem method
2017-09-19 12:44:43 +01:00
Peter Barker
84a873a520
Copter: remove redundant check; we will never failsafe_ekf_event if disarmed
...
See line 37
2017-09-19 12:44:43 +01:00
Peter Barker
0afe1e7473
Copter: move handling of SET_GPS_GLOBAL_ORIGIN up
2017-09-19 15:44:23 +09:00
Randy Mackay
1b3cc9289b
Copter: support SET_GPS_GLOBAL_ORIGIN
...
also remove setting of origin from DO_SET_HOME command
initialise ekf_origin location when consuming SET_GPS_GLOBAL_ORIGIN
set_ekf_origin performs sanity check on location
2017-09-19 10:30:15 +09:00
Randy Mackay
44a436642b
Copter: complete rename to SmartRTL
...
Also fix parameter description for CH7_OPT
2017-09-15 08:58:14 +09:00
Michael du Breuil
ffc2aeee32
Copter: Support landing flight termination
2017-09-13 13:15:08 -07:00
Peter Barker
6b5fd5fbdd
Copter: move gcs_out_of_time into GCS object
2017-09-12 18:28:07 +01:00
Randy Mackay
b1d1b5122b
Copter: 3.5.3-rc1 release notes
2017-09-12 16:43:15 +09:00
squilter
4b57a4a231
Copter: rename SafeRTL to SmartRTL
2017-09-09 14:05:41 +09:00
squilter
7abb5b10fc
Copter: build scripts changed from SafeRTL to SmartRTL
2017-09-09 14:05:41 +09:00
Randy Mackay
ed0203e53c
Copter: smooth safertl return journey using fast waypoints
2017-09-09 14:05:41 +09:00
Randy Mackay
6684e3de56
Copter: minor comment change for SafeRTL
2017-09-09 14:05:41 +09:00
Randy Mackay
8df042f00c
Copter: complete addition of SafeRTL flight mode
2017-09-09 14:05:41 +09:00
Randy Mackay
218983d594
Copter: safe-rtl changes after peer review
2017-09-09 14:05:41 +09:00
squilter
ba0e08552f
Copter: add SafeRTL flight mode
2017-09-09 14:05:41 +09:00
squilter
ec8c4b1744
Copter: add AP_SafeRTL to build
2017-09-09 14:05:41 +09:00
Peter Barker
3f67dfe4fe
Copter: move handling of do_send_banner up
2017-08-30 15:54:47 +01:00
Peter Barker
3da70f19c1
Copter: handle param_request_list in GCS_MAVLINK base class
2017-08-30 15:54:47 +01:00
Peter Barker
e6ac68fd2a
Copter: handle param_set in GCS_MAVLINK base class
2017-08-30 15:54:47 +01:00
Peter Barker
bb06db6389
Copter: move send_autopilot_request calls up to GCS base class
2017-08-30 15:54:46 +01:00
Peter Barker
470e790117
Copter: add constant structure holding firmware version
2017-08-30 15:54:46 +01:00
squilter
00ace08b54
Copter: minor formatting fixes
2017-08-30 20:07:11 +09:00
Peter Barker
30fac9160e
Copter: mavlink PERF messages also spit out average and standard deviation
2017-08-29 21:31:46 +01:00
Peter Barker
89e6e70235
Copter: remove MAIN_LOOP_RATE in favour of parameter value
2017-08-29 08:41:07 +09:00
Peter Barker
02a590024d
Copter: base loop time remaining on variable loop rate
2017-08-26 09:33:45 +09:00
Peter Barker
0b6de644fb
Copter: add ArduSub to list of SYSID_SW_TYPE
2017-08-24 19:50:38 +09:00
Peter Barker
5103739ea3
Copter: remove unused CH6 defines
2017-08-24 19:48:17 +09:00
Lucas De Marchi
be402374ea
ArduCopter: use FALLTHROUGH define
...
When falling through on a case switch, allow to add an empty statement
with the correct attribute to tell the compiler this behavior is
intended.
2017-08-22 23:59:13 -07:00
Randy Mackay
34560fb1fb
Copter: remove enabled check from optflow init
2017-08-23 11:19:14 +09:00
Randy Mackay
def17582c6
Copter: integrate simpler Log_Write_EKF
2017-08-23 11:19:14 +09:00
Peter Barker
b0c7766197
Copter: continuously reevaluate rc calibration checks
...
Stop "latching" calibration checks - if an RC radio's calibration
changes after it passes once, these patches allow the rc calibraiton
checks to then fail.
2017-08-21 09:05:31 +09:00
Peter Barker
19e409f7f4
Copter: move serial_control case to base class
2017-08-17 12:42:31 +01:00
Peter Barker
6db348bab3
Copter: move play_tune and led_control handling to base class
2017-08-17 12:27:10 +01:00
Peter Barker
aa06fc499c
Copter: use GCS_MAVLINK subclasses to handle set_mode
2017-08-16 11:58:10 +10:00
Michael du Breuil
5cfe4d5a8c
Copter: Expose the AFS instance to MAVLink
2017-08-15 15:14:56 +01:00
Peter Barker
0a2177de58
Copter: move Copter RC checking code into library
2017-08-14 15:32:25 +09:00
Randy Mackay
14f6d3e03e
Copter: 3.5.2 release notes
2017-08-14 12:12:01 +09:00
Peter Barker
c6b9c84d1f
Copter: remove CLI
2017-08-14 10:23:50 +09:00
Peter Barker
fa2b500e93
Rover: remove CLI
2017-08-14 10:23:50 +09:00
Peter Barker
55af774e98
Copter: send gps messages as separate queued messages
2017-08-09 16:18:22 +01:00
Peter Barker
56160a8bbd
Copter: move sending of gps_raw up
2017-08-09 16:18:22 +01:00
Peter Barker
ff81186951
Copter: move sending of system_time up
2017-08-09 16:18:22 +01:00
Peter Barker
7ca146878d
Copter: move sending of camera_feedback up
2017-08-09 16:18:22 +01:00
Peter Barker
da889bdff5
Copter: move sending of meminfo up
2017-08-09 16:18:22 +01:00
Jani Hirvinen
bdbe26eb28
Copter: minor comment fix
...
small edit on comments to kickoff autobuild
2017-08-09 20:14:22 +09:00
Peter Barker
c36a20ab54
Copter: use new retry_deferred method
2017-08-05 23:14:31 +01:00
Randy Mackay
4368df7f11
Copter: 3.5.2-rc2 release notes
2017-08-05 16:46:42 +09:00
Randy Mackay
8dadbaa850
Copter: landing gear init on startup
2017-08-05 11:20:41 +09:00
Randy Mackay
c3fd354452
Copter: enable landing gear based on RC output
...
previously it was enabled based on the transmitter's auxiliary switch
being setup
2017-08-05 11:20:41 +09:00
Randy Mackay
5b8e7cfdf9
Copter: landinggear_update formatting change
...
no functional change
2017-08-05 11:20:41 +09:00
Peter Barker
db080ed60e
Copter: stop sending MSG_SERVO_OUT messages
...
This didn't ever result in a message being sent on Copter
2017-08-03 14:34:33 +01:00
Peter Barker
7c37bb324b
Copter: move try_send_message queued_param_send up
2017-08-03 14:34:33 +01:00
Peter Barker
431e3443bd
Copter: move try_send_message send_hwstatus up
2017-08-03 14:33:37 +01:00
Peter Barker
3e5665735f
Copter: move try_send_message mission handling up
2017-08-03 14:24:47 +01:00
Peter Barker
2a62b57e11
Copter: move try_send_message compass message handling up
2017-08-03 14:24:46 +01:00
Peter Barker
4b63443633
Copter: correct misleading comment
2017-08-03 14:24:46 +01:00
Peter Barker
31b33b2232
Copter: base SYS_STATUS load average on variable loop rate
2017-08-01 19:39:27 +01:00
squilter
f7a00b911e
Copter: minor format fix for motors.cpp
2017-07-31 17:27:15 +09:00
Randy Mackay
167ced1279
Copter: battery arming checks call parent AP_Arming
2017-07-31 17:19:55 +09:00
Randy Mackay
9cbab6ed4b
Copter 3.5.1 release notes
2017-07-31 11:49:12 +09:00
Peter Barker
f56c9bd96d
Copter: move common mavlink camera handling up
2017-07-28 14:32:58 +01:00
Peter Barker
cdf9ebcb39
Copter: camera is responsible for taking distance-based-images and logging
2017-07-28 14:27:53 +01:00
Peter Barker
192310a68e
Copter: move gps inject handling up to GCS_MAVLINK
2017-07-27 12:03:25 +01:00
Randy Mackay
f97e43919b
Copter: add gps glitch notification and pre-arm check
2017-07-27 14:16:23 +09:00
Randy Mackay
52bf93dd80
Copter: 3.5.1-rc1 release notes
2017-07-27 12:25:22 +09:00
Peter Barker
f1ab50d4ea
Copter: handle common GPS messages in base GCS_MAVLINK class
2017-07-25 14:00:45 +01:00
khancyr
88aa1e447a
Copter: adapt to new send_proximity API
2017-07-24 13:44:43 +01:00
khancyr
0710018a42
Copter: move proximity log to DataFlash (NFC)
2017-07-24 13:44:43 +01:00
khancyr
49755063ab
Copter: move send_proximity to GCS common code (NFC)
2017-07-24 13:44:43 +01:00
khancyr
743d9ec65f
Copter: report polygon fence breach
2017-07-21 09:47:00 +09:00
Peter Barker
89478d5a28
Copter: ensure logging is working as part of arming checks
2017-07-19 16:37:28 +01:00
Peter Barker
e45efeb829
Copter: move starting of new logs into DataFlash
2017-07-19 16:37:28 +01:00
Peter Barker
cbde87b390
Copter: remove pointless pre_arm_gps_checks function
2017-07-19 16:34:57 +01:00
Peter Barker
baaad8df94
Copter: use common board_voltage_checks code
2017-07-19 16:34:57 +01:00
Peter Barker
a7bc111485
Copter: use common baro arming check function
2017-07-19 16:34:57 +01:00
Peter Barker
eb0edc9b5b
Copter: remove MSG_STATUSTEXT entirely
2017-07-18 16:12:59 +01:00
Peter Barker
ad1c379445
Copter: move handling of PREFLIGHT_SET_SENSOR_OFFSETS up
2017-07-17 14:17:19 +01:00
Peter Barker
fe16691c6e
Copter: move handling of MAG_CAL command longs up
2017-07-17 14:17:19 +01:00
Peter Barker
ecda9116ba
Copter: move MAV_CMD_START_RX_PAIR handling to base class
2017-07-17 14:17:19 +01:00
Randy Mackay
73d994a834
Copter: update 3.5.0 release notes
2017-07-17 11:15:05 +09:00
Peter Barker
7042d3e9c9
Global: all vehicles get AP_Relay and AP_ServoRelayEvent libraries
2017-07-17 00:06:31 +01:00
Peter Barker
b14964eb1e
Copter: move mavlink support for servo/relay up
2017-07-16 23:56:00 +01:00
Peter Barker
3e3a8717c5
Copter: add common handling of mavlink command messages
2017-07-16 23:56:00 +01:00
Michael du Breuil
a81bfe644a
Copter: Document max loop time as being in microseconds
2017-07-15 17:27:04 +09:00
Peter Barker
480a83fdef
Copter: move rally-point handling up
2017-07-14 01:28:05 +01:00
Peter Barker
7bb28175d7
Copter: remove unneeded telemetry_delayed parameter
2017-07-12 17:01:36 +01:00
Peter Barker
016eeaa258
Copter: move handling of incoming statutext messages up
2017-07-12 16:52:24 +01:00
Randy Mackay
260412bf0f
Copter: 3.5.0-rc11 release notes
2017-07-12 13:56:01 +09:00
Randy Mackay
c1433e0220
Copter: minor comment and formatting fixes
...
no functional change
2017-07-12 13:27:45 +09:00
Randy Mackay
ed65d55f5e
Copter: guided stops rotating if no updates received for 3 seconds
2017-07-12 13:27:45 +09:00
Randy Mackay
2b98fd765d
Copter: guided_set_destination accepts relative yaw
2017-07-12 13:27:45 +09:00
Randy Mackay
4c9e118ceb
Copter: set_auto_yaw_look_at_heading takes bool for relative angle arg
...
No functional change
2017-07-12 13:27:45 +09:00
Randy Mackay
9b05f1d9c7
Copter: add auto-yaw-rate and replace guided_angle_state.use_yaw_rate
...
We use the auto_yaw_mode in auto and guided modes to allow various yaw behaviours
This commit adds a new AUTO_YAW_RATE control to the mode and uses it within guided mode.
This new RATE control is not currently used within auto mode because there is no way (yet) for a mission command to specify a desired rate.
2017-07-12 13:27:45 +09:00
kouseii
4dd7d9eaff
Copter: guided mode supports heading and yaw-rate target
2017-07-12 13:27:45 +09:00
Peter Barker
8a1fc6a406
Copter: remove global static send_statustext_chan
2017-07-11 23:53:53 +01:00
Peter Barker
592729733e
Copter: eliminate GCS_MAVLINK::send_statustext_all
2017-07-11 23:53:53 +01:00
Peter Barker
a4d167affe
Copter: eliminate global static GCS_MAVLINK::send_home_all
2017-07-11 23:48:39 +01:00
Peter Barker
3660236a0d
Copter: move common mission handling up to GCS_MAVLINK
2017-07-11 23:45:16 +01:00
Peter Barker
358555446b
Copter: eliminate gcs_send_mission_item_reached wrapper
2017-07-11 23:45:16 +01:00
Peter Barker
0ac045febe
Copter: eliminate gcs_send_message wrapper
2017-07-11 23:45:16 +01:00
Andrew Tridgell
7473471f38
Copter: reverse IDs in g2 for TCAL and tx_type
...
as discussed with Randy
2017-07-10 17:07:57 +10:00
Tom Pittenger
25b014524a
Copter: use send_text method on the GCS singleton
2017-07-09 19:03:26 -04:00
Peter Barker
f60389d4aa
Copter: use send_text method on the GCS singleton
2017-07-09 17:17:29 -04:00
Peter Barker
037cd2e9c6
ArduCopter: use Notify singleton for sending statustext
2017-07-09 17:17:29 -04:00
Randy Mackay
a6fbae16bf
Copter: 3.5.0-rc10 release notes
2017-07-08 10:51:23 +09:00
Randy Mackay
2e56e10d9c
Copter: ekf check adds position variance check
...
two of three of compass, velocity and position variances being high will trigger the ekf failsafe
2017-07-08 08:39:43 +09:00
Peter Barker
d9b45cc202
Copter: create GCS subclass, use inheritted methods
2017-07-07 16:18:37 +01:00
Peter Barker
2d11544ea8
Copter: remove redundant arming check defines
2017-07-06 11:55:12 +09:00
Dr.-Ing. Amilcar Do Carmo Lucas
9994e9b773
Copter: improve stream descriptions (NFC)
2017-07-04 08:12:57 +09:00
Eugene Shamaev
24c390ade0
ArduCopter: move of CAN parameters into separate group
2017-07-03 11:44:32 +01:00
Randy Mackay
c75f30eb9b
Copter: 3.5.0-rc9 release notes
2017-07-03 14:42:26 +09:00
Randy Mackay
41752eef8b
Copter:default RC_FEEL to 50
2017-07-03 09:34:07 +09:00
Peter Barker
37abc1b02f
Copter: check dataflash to see if we should log backend gps messages
2017-06-29 15:43:38 +01:00
Peter Barker
776d691c79
Copter: use DataFlash should_log to determine raw logging
2017-06-29 15:26:27 +01:00
Peter Barker
cfbde937c6
Copter: move should_log check of log bitmask into DataFlash
2017-06-29 15:26:27 +01:00
Peter Barker
8b57405143
Copter: handle knowledge of in_log_download in DataFlash
2017-06-27 03:10:43 +01:00
Peter Barker
45a55bfa5f
Copter: move send-logs-via-mavlink code into DataFlash
2017-06-27 03:10:43 +01:00
Leonard Hall
f29951c2bf
Copter: fix autotune accel max not being used until reboot
...
Once autotune completes successfully, the discovered acceleration maximums should be used if the pilot tests the tune
2017-06-22 15:19:57 +09:00
Randy Mackay
356a405e2d
Copter: autotune minor format fix
2017-06-22 15:18:04 +09:00
Leonard Hall
2888096a42
Copter: autotune keeps constant attitude while holding position
2017-06-22 15:18:04 +09:00
Randy Mackay
51c20637e5
Copter: fix compile error when logging disabled
...
Also slightly re-order placement of functions
2017-06-22 15:18:04 +09:00
Leonard Hall
7eab1239c7
Copter: attitude logging at 400hz
2017-06-22 15:18:04 +09:00
Michael du Breuil
f0cb234228
Copter: Handle NAV_CONTROLLER_OUTPUT.wp_dist overflowing
2017-06-20 15:41:50 +01:00
Andrew Tridgell
9d7ed495da
Copter: call set_likely_flying()
2017-06-20 09:44:44 +10:00
Peter Barker
4af3b31128
Copter: move MAVLINK_MSG_ID_REMOTE_LOG_BLOCK_STATUS handling up
2017-06-17 15:07:48 +01:00
Andrew Tridgell
ba21c1e67d
Copter: set RC_SPEED default to 16kHz for brushed
2017-06-17 17:37:45 +10:00
Peter Barker
4163455d97
Copter: stop using in_mavlink_delay as a proxy for disabling logging
2017-06-16 17:07:48 +01:00
Peter Barker
cb41f09d2e
Copter: call dataflash should_log method
2017-06-16 17:07:48 +01:00
Randy Mackay
cb77c1acc9
Copter: 3.5.0-rc8 release notes
2017-06-15 13:48:44 +09:00
Peter Barker
019dd02569
Copter: simplify dataflash initialisation
2017-06-14 12:20:29 +01:00
Shingo Matsuura
0800c6be52
Copter: add beacon object to avoidance object
2017-06-14 16:07:32 +09:00
Randy Mackay
a5ea9420c0
Copter: landing gear position set less often
...
This change means no pwm output is sent to the landing gear servos until the pilot has moved the switch
2017-06-13 13:56:07 +09:00
Peter Barker
3ee56f5475
Copter: StartUnstartedLogging replaces logging_started/start_logging
2017-06-11 20:34:12 +01:00
Peter Barker
43a16b9327
Copter: simplify should_log (NFC)
2017-06-11 20:34:12 +01:00
Peter Barker
d36e8fa51e
Copter: eliminate calls to manipulate _writes_enabled
2017-06-11 20:34:12 +01:00
Peter Barker
2bb22da599
Copter: simplify start_logging
2017-06-11 20:34:12 +01:00
Pierre Kancir
d5cc1e64ed
GCS_Common: rename send_rangefinder to send_rangefinder_downward
2017-06-08 01:32:04 +01:00
Pierre Kancir
73038a0e09
ArduCopter: GCS_mavlink style correction
2017-06-08 01:31:52 +01:00
Pierre Kancir
ac0a300415
ArduCopter: correct msg send by proximity
2017-06-08 01:31:52 +01:00
Pierre Kancir
261eb387eb
ArduCopter: change rangefinder msg for common one
2017-06-08 01:31:43 +01:00
Pierre Kancir
156863d10a
ArduCopter: add DISTANCE_SENSOR support
2017-06-08 01:22:07 +01:00
Peter Barker
758414cfe5
Copter: allow mavlink messages to be exchanged on failed boot
2017-06-07 12:56:46 +01:00
Randy Mackay
cb76bd8f3d
Copter: compass set-initial-location uses ahrs location
...
Previously it could attempt to use a gps location even if gps was not being used
Also compass-accumulate moved to sensors.cpp
2017-06-07 13:01:38 +09:00
Randy Mackay
814cadac68
Copter: consolidate set_home functions
...
added lock argument instead of having twice as many functions
no functional change
2017-06-07 13:01:38 +09:00
Randy Mackay
ec491d3c6b
Copter: init_compass get g.compass_enabled check
...
No functional change
2017-06-07 10:34:13 +09:00
Leonard Hall
8def1d257e
Copter: pass battery resistance estimate to motors
2017-06-06 14:57:04 +09:00
Dr.-Ing. Amilcar Do Carmo Lucas
f8aa91681e
Copter: Improve the PWM parameters descriptions
2017-06-06 11:06:26 +10:00
Randy Mackay
010dc103be
Copter: increase RC input deadzones for roll pitch and yaw
...
Copter-3.5 testing resulted in a significant number of users reporting various issues like poshold and autotune were not functioning because their RC inputs were straying out of the deadzones
2017-06-01 10:10:57 +09:00
Leonard Hall
c61d0a7373
Copter: reduce RC_FEEL default to 25
2017-06-01 10:06:20 +09:00
murata
1a76c28655
Copter: add dodeca-hexa
2017-05-27 14:21:13 +09:00
Randy Mackay
70ed572476
Copter: minor formatting fix
...
This is mostly just to trigger compilation of the latest beta
2017-05-25 17:53:20 +09:00
Randy Mackay
5f0214dd41
Copter: update AC3.5.0-rc7 release notes
2017-05-25 13:29:35 +09:00
Randy Mackay
9002a635e2
Copter: 3.5.0-rc7 release notes
2017-05-25 13:29:33 +09:00
Paulo Neves
9c6a7c170f
Copter: Add MAV_CMD_DO_SET_CAM_TRIGG_DIST support
2017-05-25 09:35:22 +09:00
Michael du Breuil
6ba53cf11c
Copter: Ignore Landing message
2017-05-24 15:22:27 -07:00
Randy Mackay
a77f21da4a
Copter: sport and acro trainer limits based on target attitude
...
previously the trainer used the vehicle's actual attitude meaning that the target could get far past the limits if there was an attitude error
2017-05-23 19:44:52 +09:00
Randy Mackay
a0c5ac1949
Copter: fix compassmot for oneshot ESCs
2017-05-23 13:11:46 +09:00
Andrew Tridgell
c459a25194
Copter: adjust autotune poshold
...
only reset position on pitch or roll input
also increases the max angle error for twitching in autotune. When a
vehicle is not well tuned the limit can prevent twitching
2017-05-23 09:41:11 +09:00
Randy Mackay
010665f915
Copter: fix esc calibration for one-shot
...
the cork and push need to be done from the vehicle level
2017-05-23 07:57:17 +09:00
Randy Mackay
b4d7d4f43f
Copter: resolve compiler warnings in autotune GCS messages
2017-05-22 12:34:06 +09:00
Peter Barker
d5afd01ef2
Copter: remove duplicate autotune rotation warning
2017-05-18 16:28:00 +09:00
Randy Mackay
ca8ae06bba
Copter: minor format fix to landing-gear update function
2017-05-18 12:26:19 +09:00
Peter Barker
34eae9d9cb
Copter: AutoTune: include axis being tuned in output
2017-05-18 09:36:00 +09:00
Peter Barker
0bc17645fb
Copter: AutoTune: add gcs messages detailing wait-for-level state
2017-05-18 09:36:00 +09:00
Peter Barker
586a5df814
Copter: add GCS messaging during autotune
2017-05-18 09:36:00 +09:00
Dr.-Ing. Amilcar Do Carmo Lucas
f366095113
Copter: Use SI units conventions in parameter units
...
Follow the rules from:
http://physics.nist.gov/cuu/Units/units.html
http://physics.nist.gov/cuu/Units/outside.html
and
http://physics.nist.gov/cuu/Units/checklist.html
one further constrain is that only printable (7bit) ASCII characters are allowed
2017-05-17 18:07:25 +10:00
Dr.-Ing. Amilcar Do Carmo Lucas
60aeade0f4
Copter: Add missing @RebootRequired: True
2017-05-15 21:51:16 +09:00
Randy Mackay
376b9e994f
Copter: AC3.5-rc6 release notes
2017-05-15 15:04:28 +09:00
Randy Mackay
91d4b4777b
Copter: respond to param list request after motor init
2017-05-15 14:13:43 +09:00
Pierre Kancir
436d0f8c84
ArduCopter: radio fix passthrough range on heli/coax/single
2017-05-13 10:19:20 +09:00
Randy Mackay
caa2148e45
Copter: move esc calibration startup check to after servo function initialisation
2017-05-11 11:30:05 +09:00
Randy Mackay
0e7f12049c
Copter: fix esc calibration is safety switch has been disabled
2017-05-11 11:30:05 +09:00
Randy Mackay
f9c8bb1b01
Copter: ensure esc calibration only occurs on next reboot
...
It was possible for a board with no safety switch attached to get stuck waiting for the user to press the non-existance switch. Rebooting now resolves the problem because the ESC_CAL parameter is reset to zero regardless of whether the calibration completes or not.
2017-05-11 11:30:05 +09:00
Randy Mackay
a3450a955d
Copter: fix LED notify during auto esc calibration
2017-05-11 11:30:05 +09:00
karthik.desai
d7976078a5
Copter: fix typo in comments
2017-05-08 10:08:31 +09:00
murata
8fd9c73b78
Copter: Add SuperSimpleMode "2" to Simple Mode setting.
2017-05-08 09:31:23 +09:00
Andrew Tridgell
3b33434695
Copter: removed AP_Airspeed from vehicle code
2017-05-04 22:59:02 -07:00
Luis Vale Gonçalves
04cb1027b8
Copter: minor fix to release notes
2017-05-03 17:10:27 +09:00
Randy Mackay
f2131ed2d0
Copter: AC3.5-rc5 release notes
2017-05-03 14:08:45 +09:00
Peter Barker
b37e64b23c
Copter: stop appending lf to PERF message
2017-05-01 16:21:55 +01:00
Peter Barker
069e0d1973
Copter: move init of DataFlash references into vehicle init
...
It is possible to start a log before the existing codepath is crossed.
2017-05-01 15:04:34 +01:00
Peter Barker
6ccb7cf3f4
Copter: tidy dataflash Frame reporting
2017-05-01 19:16:47 +10:00
Andrew Tridgell
22791b7272
Copter: use common send_queued_parameters()
2017-05-01 14:36:10 +10:00
Andrew Tridgell
49b18819ce
Copter: enable channels in ESC calibration
2017-05-01 14:32:18 +10:00
Andrew Tridgell
2ba6e7af35
Copter: fixed aux servos in RC failsafe
...
we should always output to channels
2017-05-01 14:32:18 +10:00
Andrew Tridgell
10b89db498
Copter: call BoardConfig.init_safety() at end of startup
...
this fixes a bug where motors can start on soft reboot
2017-04-30 21:47:04 +10:00
Randy Mackay
aab27d8d0e
Copter: auto loiter initialisation simplified
...
The simpler set_wp_destination can be used instead of set_wp_origin_and_destination
2017-04-28 09:10:02 +09:00
Randy Mackay
65e97a9503
Copter: rtl initialises wp controller earlier
...
We need to initialise wp controller or the build_path could use the wrong speeds and accelerations when calculating the origin (aka stopping point)
2017-04-28 09:10:02 +09:00
Andrew Tridgell
1875d2adab
Copter: fixed duplicate include of AP_ADC library
2017-04-27 18:32:26 +10:00
Randy Mackay
81f8ab3933
Copter: guided init uses vertical stopping point
2017-04-27 14:36:23 +09:00
Randy Mackay
a342b73604
Copter: guided velocity contoller inits accel and jerk
...
In practice this has no functional impact because the guided_pos_control_start initialises these values (using AC_WPNav) and it is not currently possible for a user to get to the velocity controller without having first used the guided position controller
2017-04-27 14:35:46 +09:00
Randy Mackay
1a246851fc
Copter: enable radio failsafe by default
2017-04-24 17:07:42 +09:00
Peter Barker
afbdbcce26
Copter: log GPS detection state to DF on log startup
2017-04-23 21:04:17 +01:00
karthik.desai
afc382c342
Copter: moved beacon logging to dataflash
2017-04-22 10:55:08 +09:00
Randy Mackay
8f43b60247
Copter: set EKF origin from first do-set-home command
2017-04-22 10:37:31 +09:00
Randy Mackay
3348ab4fa8
Copter: send upward DISTANCE_SENSOR message to GCS
2017-04-20 18:11:43 +09:00
Randy Mackay
496e8f3cdb
Copter: integrate proximity method rename
2017-04-20 18:11:43 +09:00
Andrew Tridgell
1a8669201e
Copter: ignore MSG_AOA_SSA
2017-04-19 20:48:42 +10:00
Randy Mackay
713c08672f
Copter: integrate AP_VisualOdom
2017-04-19 11:04:40 +09:00
Randy Mackay
d5dd7e719a
Copter: add AP_VisualOdom to build
2017-04-19 11:04:40 +09:00
Andrew Tridgell
ebde6e1ce3
Copter: output any servo channels on motor output
...
if we have any auxillary servo channels we need to calculate the
output value
2017-04-18 09:34:42 +09:00
Randy Mackay
032bfad79f
Copter: move rc input check to esc_calibration_startup_check
...
No functional change
2017-04-18 09:29:55 +09:00
Randy Mackay
fc675a1e4a
Copter: do not allow motor test before initialisation completes
2017-04-18 09:29:53 +09:00
Randy Mackay
1bfbf0d43f
Copter: enable motors at end of initialisation
2017-04-18 09:29:51 +09:00
Francisco Ferreira
bf22919a8c
Copter: add support for MANUAL_CONTROL message
2017-04-12 16:16:11 +09:00
Michael du Breuil
ea89bd1178
Copter: Send BATTERY_STATUS
2017-04-12 10:21:49 +09:00
murata
597dbb2df4
Copter: Compare bit variables, change set values.
...
Copter: Change from comment 1 to true.
2017-04-12 09:19:07 +09:00
Tom Pittenger
01de4b1176
Copter: clarify release notes for Intel Aero
...
update ReleaseNotes to clarify that the copter 3.4.0-rc4 (06-Sep-2016) note "Intel Aero flight controller support" does not mean the Intel Aero RTF.
2017-04-10 16:42:25 -07:00
Randy Mackay
7478ae9eb4
Copter: TUNE parameter description fixes
2017-04-08 15:35:05 +09:00
Randy Mackay
7f93818d31
Copter: 3.5-rc4 release notes
2017-04-08 15:32:01 +09:00
Andrew Tridgell
b4d9397821
Copter: re-arrange fast_loop for minimum latency
...
this makes motor outputs as responsive as possible to gyros
2017-04-03 13:04:11 +09:00
Randy Mackay
5497030ebf
Copter: version to 3.6-dev
2017-03-30 08:19:18 +09:00
Jacob Walser
587c50c1a1
Copter: Remove redundant nested #if CLI_ENABLED
2017-03-29 19:20:51 +01:00
Jonathan Challinger
054aab738b
Copter: remove const qualifier from do_precision_loiter
2017-03-29 14:06:12 +09:00
Andrew Tridgell
01206f9e59
Copter: add available memory to PM message
2017-03-27 14:35:21 +09:00
Andrew Tridgell
6bb5c16fb8
Copter: allow for HELI_DUAL configurations
2017-03-25 16:22:10 +11:00
Randy Mackay
50523619b9
Copter: 3.5-rc3 release notes
2017-03-25 11:50:40 +09:00
Randy Mackay
dfe3922d82
Copter: modify pre-arm check wording
...
- slight wording change to RC pre-arm check
- shorten Accelerometers to Accels to allow failure message to fit on MP HUD
2017-03-25 10:50:58 +09:00
Randy Mackay
bff9189afc
Copter: fixup fence pre-arm checks
...
- require GPS if polygon fence is enabled
- fence pre-arm failure shows failure message
- tell user fence is enabled which is why GPS is required
2017-03-25 10:50:58 +09:00
Lucas De Marchi
cc7633f272
ArduCopter: replace board ifdef with feature ifdef
2017-03-24 12:06:19 +11:00
Lucas De Marchi
b17acfee12
Add aerofc support
...
Flight Controller board that comes on Intel Aero RTF Drone.
2017-03-24 12:06:19 +11:00
Jacob Walser
353202e03c
Copter: Fix parameter metadata
2017-03-22 16:16:26 -07:00
Randy Mackay
15d96b4b5d
Copter: release notes for 3.4.6
2017-03-15 09:40:17 +09:00
Andrew Tridgell
54b852ebfe
Copter: fixed var table loading for heli single parms
...
we were not loading parameters such as the swash angle
2017-03-15 11:31:45 +11:00
Andrew Tridgell
dae1567d6c
Copter: log home and origin on logging start
2017-03-14 10:51:15 +11:00
Randy Mackay
375f7b15ff
Copter: 3.5-rc2 release notes
2017-03-13 12:25:07 +09:00
Randy Mackay
8140353c64
Copter: log event when primary GPS changes
2017-03-13 11:31:51 +11:00
Randy Mackay
b30d743812
Copter: AP_Arming calls parent's gps checks
...
Allows removing some duplicate code
2017-03-13 11:31:51 +11:00
Peter Barker
1d70a337dd
Copter: remove unused desired_climb_rate variable
2017-03-09 19:52:58 +11:00
Randy Mackay
ca4cbaeb39
Copter: run rate controllers before AHRS/EKF update
...
This reduces lag between IMU updates and motor outputs by 0.6 milliseconds
2017-03-03 13:14:28 +11:00
Randy Mackay
e8c5612587
Copter: fix reference to PosControl param descriptions
...
No functional change
2017-03-01 14:59:44 +09:00
Randy Mackay
627e3faf41
Copter: fix SYSID_ENFORCE parameter description
2017-02-28 15:06:51 +09:00
Andrew Tridgell
0d1bcd3b94
Copter: added automatic yaw to autotune position control
2017-02-27 19:34:44 +09:00
Andrew Tridgell
fa119f8231
Copter: enable poshold in autotune only from LOITER or POSHOLD
2017-02-27 19:34:42 +09:00
Andrew Tridgell
37fca03db3
Copter: implement simple position hold during autotune
...
this holds position during tuning with low gain
2017-02-27 19:34:36 +09:00
Randy Mackay
c100f53ee6
Copter: add upward distance to proximity logging
2017-02-27 15:18:24 +09:00
Randy Mackay
34726208b2
Copter: clarify CHX_OPT avoidance and adsb-avoidance
2017-02-27 15:18:23 +09:00
Randy Mackay
51c00f8144
Copter: use only downward facing rangefinder
2017-02-27 15:18:16 +09:00
Lucas De Marchi
a589a84e32
ArduCopter: just call set_throttle_range()
...
Now set_throttle_range in AP_Motors does the right thing, calling out
the RCOutput method.
2017-02-26 13:38:24 +11:00
Jacob Walser
868be023ee
Copter: Refactor fence.get_safe_alt() to fence.get_safe_alt_max()
2017-02-21 11:26:14 +11:00
Andrew Tridgell
f1917dddd0
Copter: changes for AC_WPNav
2017-02-18 17:26:43 +11:00
Andrew Tridgell
92fdef5b97
Copter: changed for AP_AHRS_View on AC_AttitudeControl
2017-02-18 17:26:43 +11:00
Andrew Tridgell
aad412eaef
Copter: support tailsitter frame class
2017-02-18 17:26:43 +11:00
Andrew Tridgell
3cb88d0a23
Copter: added tailsitter frame support
2017-02-18 17:26:43 +11:00
Andrew Tridgell
7efca1881c
Copter: fixed a problem with initial parameter fetch
...
if the GCS connects before the motors have been allocated then it will
get an incorrect parameter count from the MAVLink param protocol. We
need to prevent the PARAM_REQUEST_LIST message from being replied to
until motors are allocated which is done as part of init_ardupilot
2017-02-15 17:16:30 +10:00
Andrew Tridgell
6b6d03eb8d
Copter: fixed upgrade of parameters
...
now that we dynamically allocate many key objects in copter we need to
move the parameter upgrade code to after when the objects are allocated
2017-02-15 15:02:06 +10:00
Andrew Tridgell
d8972d5344
Copter: setup frame type parameter flags
2017-02-14 19:50:01 +11:00
Peter Barker
65a182a068
Copter: not in log download upon log erase
...
erase is a synchronous operation
2017-02-13 11:36:16 +11:00
Peter Barker
029aeeb4fd
Copter: support for a GCS singleton
2017-02-13 09:32:01 +11:00
Peter Barker
f49f153da0
Copter: rename gcs[] to gcs_chan[]
...
Wish to use gcs() to return the gcs singleton
2017-02-13 09:32:01 +11:00
Randy Mackay
d2cc340587
Copter: 3.4.5 release notes
2017-02-11 15:15:42 +09:00
Clément
3aa17d17eb
Copter : set land_complete to false during guided takeoff (same fix as for auto takeoff bug)
2017-02-07 20:19:17 +09:00
Dr.-Ing. Amilcar Do Carmo Lucas
4161c34e61
Copter: rename MSG_RADIO_OUT to MSG_SERVO_OUTPUT_RAW to better describe what it is
2017-02-07 11:41:12 +11:00
Peter Barker
b7f982d7ce
Copter: support for arming and disarming using an auxsw
2017-02-06 16:48:50 +09:00
Andrew Tridgell
00711f5a98
Copter: fixed typo in param generation
2017-02-06 15:36:52 +11:00
Andrew Tridgell
79b23dff0e
Copter: fixed parameter path
2017-02-06 15:12:32 +11:00
Michael Day
49e3ce8e75
Copter: Now recognizes DO_FENCE_ENABLE mission command.
2017-02-05 00:10:14 +00:00
Pierre Kancir
1455f8c513
Copter: correct advance failsafe
2017-01-31 11:22:54 +09:00
Randy Mackay
d3d6099540
Copter: update 3.5-rc1 release notes
2017-01-28 23:01:10 +09:00
Randy Mackay
4f5ca37df4
Copter: 3.5-rc1 release notes
2017-01-28 17:08:03 +09:00
murata
8f926bd177
Copter: Unify from print or println to printf.
2017-01-27 18:20:22 +11:00
Peter Barker
4aaeb4bfed
Copter: get mav heartbeats out when board detection fails
2017-01-27 13:48:23 +09:00
Randy Mackay
6726d94537
Copter: update notify during ESC calibration
...
The notify devices including the RGB were not being updated meaning the main LED was normally frozen or off during calibration. The desired behaviour is that it flashes red, blue, yellow.
2017-01-27 12:14:56 +09:00
Randy Mackay
a25f51c893
Copter: delay up to 2sec for first radio pulse
...
Pixracer boards can take 1 second (or possibly longer) to start reading RC input. This ensure we see the user's high throttle to indicate the user wants to perform the ESC calibration
2017-01-27 12:14:56 +09:00
Michael du Breuil
0fec4af54b
Copter: Support the SYS_STATUS_SENSOR_BATTERY bit
2017-01-25 09:26:19 +09:00
Randy Mackay
26919b4ab6
Copter: send flight mode string to Notify
2017-01-23 15:07:20 -08:00
Randy Mackay
af514eb101
Copter: remove some comments
2017-01-23 15:07:20 -08:00
Dmitry Prokhorov
3e993f955e
ArduCopter: Support for OLED display by Alexey Kozin
2017-01-23 15:07:20 -08:00
Peter Barker
01b1916de5
Copter: ensure logging is working as part of prearm
2017-01-20 17:03:45 +09:00
Peter Barker
e7d3219a58
Copter: check all channels have been configured, not just throttle
2017-01-20 13:02:53 +09:00
Peter Barker
ab13b3beaf
Copter: make rc checks verbose on failure
2017-01-20 13:02:53 +09:00
Peter Barker
078866046a
Copter: correct rc-arming checks concerning trims
...
Trims should always be between min and max
2017-01-20 13:02:53 +09:00
Andrew Tridgell
332820aa88
Copter: fixed load of var_info for attitude_control and motors
...
we need to pass the var_info for the specific class we are using, not
the parent class.
Fixes issue #5585
thanks to Julien for noticing!
2017-01-20 12:05:09 +11:00
Randy Mackay
cb1f7ba4bb
Copter: remove setting position control's altitude max
...
AC_Avoid now takes responsibility for enforcing the alt limit and accesses inertial nav's limit directly
2017-01-18 09:35:47 +09:00
Randy Mackay
62a4867cd4
Copter: use avoidance adjusted climb rate in all modes
2017-01-18 09:35:47 +09:00
Randy Mackay
b15d341850
Copter: add avoidance adjusted climb rate
2017-01-18 09:35:47 +09:00
Randy Mackay
ebbfa9391d
Copter: remove comments from package place
2017-01-18 09:35:47 +09:00
Peter Barker
cc86011d20
Copter: use abs() on integers; Location alts are in integer cm
2017-01-17 09:41:37 -08:00
Peter Barker
96d73affae
Copter: fix float warning; get_velocity_z() returns float
2017-01-17 09:41:37 -08:00
Leonard Hall
36b6218e31
Copter: integrate attitude control's set-throttle-mix-manual
2017-01-17 14:19:16 +09:00
Randy Mackay
becc56da0b
Copter: AP_Arming internal references start with underscore
2017-01-17 11:45:08 +09:00
Randy Mackay
f476c706f6
Copter: add override to AP_Arming_Copter::pre_arm_checks
2017-01-17 11:45:08 +09:00
Randy Mackay
cc217550c0
Copter: rename arming_checks to AP_Arming
2017-01-17 11:45:08 +09:00
Randy Mackay
a52db9f29d
Copter: fix motors_checks to AP_Arming
2017-01-17 11:45:08 +09:00
Randy Mackay
ee9588c674
Copter: fix proximity arming checks
2017-01-17 11:45:08 +09:00
Randy Mackay
b89d3564c7
Copter: move set_pre_arm_check to arming_checks
2017-01-17 11:45:08 +09:00
Peter Barker
4ea6cf4ce3
Copter: transfer old ARMING_CHECK value to new location
2017-01-17 11:45:08 +09:00
Peter Barker
ac980fdd47
Copter: use compass_checks from AP_Arming
...
User-visible changes:
- checks will fail if calibration is in progress
- PX4FMU_V1 will now have COMPASS_OFFSETS_MAX of 600, not 500
- if the primary compass is not set to be used then compass checks will always pass
2017-01-17 11:45:08 +09:00
Peter Barker
f3a31b988a
Copter: use ins_checks from AP_Arming
...
Functionality changes:
- gyros and accels only have to be consistent in last 10 seconds to pass
- ins.use_accel() is honoured when checking for consistency
- ins.use_gyro() is honoured when checking for consistency
- threshold is trippled rather than doubled for accel cal checks
- checks are reordered
2017-01-17 11:45:08 +09:00
Peter Barker
bd6ffc025e
Copter: start conversion to AP_Arming_Copter
2017-01-17 11:45:08 +09:00
Randy Mackay
ae18c25070
Copter: add AP_Arming to build
2017-01-17 11:45:08 +09:00
Andrew Tridgell
1297a7dedb
Copter: convert the rest of motors class for tricopter
2017-01-12 17:39:37 +11:00
Andrew Tridgell
7aee3500e1
Copter: added conversion of tricopter tail servo parameters
2017-01-12 17:39:37 +11:00
Andrew Tridgell
a3220944d8
Copter: make conversion tables constant
2017-01-12 17:39:37 +11:00
Andrew Tridgell
6a12ed0d65
Copter: upgrade heli servo parameters
2017-01-12 17:39:37 +11:00
Andrew Tridgell
bf889e01e1
Copter: load objects from storage after allocation
2017-01-12 17:39:37 +11:00
Andrew Tridgell
3fe1a69a32
Copter: always allocate a motors backend
...
this allows autotest to run, and gives a less confusing error to users
when no FRAME_CLASS error is selected
2017-01-12 17:39:37 +11:00
Andrew Tridgell
c0c25e0588
Copter: fixed parameter doc paths
2017-01-12 17:39:37 +11:00
Andrew Tridgell
8dcde8ee92
Copter: make binary names arducopter and arducopter-heli
2017-01-12 17:39:37 +11:00
Andrew Tridgell
e85df47b06
Copter: fixed parameter handling for pointer objects
...
fixed loading of default files and use of POINTER flag on object
groups
2017-01-12 17:39:37 +11:00
Andrew Tridgell
556cda13e1
Copter: reduced copter frame build
2017-01-12 17:39:37 +11:00
Andrew Tridgell
4a4fc8ab06
Copter: adjust for change to AC_PID
2017-01-12 17:39:37 +11:00
Andrew Tridgell
0f6d0c5ba9
Copter: combined tri, single, coax and multicopter into a single build
...
this allows copter to be just 2 builds, one for heli, and one for
everything else
2017-01-12 17:39:37 +11:00
Andrew Tridgell
3c1517f583
Copter: added automatic SRV_Channel parameter upgrade
2017-01-12 17:39:37 +11:00
Andrew Tridgell
5a87ae3f01
Copter: use new SRV_Channels API
2017-01-12 17:39:37 +11:00
Francisco Ferreira
11b635df12
Copter: correct limit status to fence status
2017-01-12 02:00:51 +00:00
Dr.-Ing. Amilcar Do Carmo Lucas
712fbfe84b
Copter: Update descriptions of stream rate parameters
2017-01-12 01:47:12 +00:00
Randy Mackay
b1e494a209
Copter: return MAV_TYPE as quadcopter by default
...
This allows the GCSs to know that the firmware is for a multicopter
2017-01-12 09:27:14 +09:00
Randy Mackay
20ca021cab
Copter: pass distance-sensor messages to AP_Proximity
2017-01-11 21:48:23 +09:00
Randy Mackay
742cdf6b13
Copter: fix arming while armed bug
...
If a mavlink command was sent to arm the vehicle while it was already armed, the in_arm_motors boolean was left as true meaning the vehicle could never be armed again using a mavlink message. This resolves issue #5546 .
2017-01-11 21:38:22 +09:00
Randy Mackay
bdbb07a3b1
Copter: remove version from Copter.cpp
...
Also added wiki page URL
2017-01-11 08:46:43 +09:00
murata
e65887c393
Copter: Change sprintf method to secure snprintf method.
2017-01-09 16:05:56 +00:00
Dr.-Ing. Amilcar Do Carmo Lucas
8419045aea
Spell in comments
2017-01-06 10:57:39 -08:00
Randy Mackay
2416e66103
Copter: 3.4.4 release notes
2017-01-06 14:53:46 +09:00
Randy Mackay
6b4acebd26
Copter: bigger buf when sending frame string to frsky telem
2017-01-05 13:45:53 +09:00
Luis Vale Gonçalves
b9e83755f3
Copter: Notify GCS that Flight mode change failed
...
Copter: Notify GCS that Flight mode change has failed
2017-01-05 02:16:32 +00:00
Randy Mackay
e32ddaa7fa
Copter: reorder beacon and proximity declaration
...
resolves compiler warning
2017-01-04 19:58:53 +09:00
Peter Barker
a233024e05
Copter: fix compilation when fence andd proximity are disabled
...
This adds AC_AVOID_ENABLED; avoidance must be disabled if either
of fence or proximity are disabled.
Parameter definitions have been reordered to avoid compiler warnings;
this make sthe numbering non-linear
2017-01-03 10:44:03 +09:00
Peter Barker
d3e331e1f2
Copter: correct compilation when rally disabled
2017-01-03 10:24:56 +09:00
Peter Barker
cf4be25d61
Copter: correct compilation when camera disabled
2017-01-03 10:24:35 +09:00
Peter Barker
4ef927ebea
Copter: correct compilation when AFS enabled (using make)
2017-01-03 10:23:50 +09:00
Peter Barker
8033e0c315
Copter: fix compilation when gripper disabled
2017-01-02 15:59:30 +09:00
Peter Barker
990d5fd0e5
Copter: fix compilation when logging disabled
2017-01-01 18:22:53 -08:00
Randy Mackay
d011783d76
Copter: fix FRAME_TYPE param description
2016-12-31 10:55:23 +09:00
Randy Mackay
e31d6d051d
Copter: get_frame_mav_type switch fix
...
This returns generic as the mavtype and avoids warnings of unreachable code
Thanks to muramura for suggesting this
2016-12-31 10:55:23 +09:00
Randy Mackay
12d024e0c6
Copter: rename FRAME to FRAME_TYPE
...
This unifies the plane and copter parameter names
2016-12-31 10:55:23 +09:00
Randy Mackay
01bcf5e528
Copter: add arming checks for motor setup
2016-12-31 10:55:23 +09:00
Randy Mackay
217757fdc8
Copter: default FRAME_CLASS
2016-12-31 10:55:23 +09:00
Randy Mackay
0ac00dbfd6
Copter: add FRAME_CLASS parameter
2016-12-31 10:55:23 +09:00
Peter Barker
3551609a21
Copter: payload place requires 30% throttle reduction to release
2016-12-24 11:53:19 +09:00
Peter Barker
c191a44b27
Copter: payload place skips releasing states if gripper not valid
2016-12-24 11:50:01 +09:00
murata
f747716172
Copter: Changed if statements to switch statement.
...
Copter: Correct the processing in Guided mode.
Copter: Insert white space.
2016-12-24 11:24:35 +09:00
Randy Mackay
b845668f23
Copter: 3.4.4-rc1 release notes
2016-12-22 02:26:11 +09:00
Randy Mackay
dbbf6cae5c
Copter: arming check ignores proximity if avoidance disabled
2016-12-20 19:48:09 +09:00
Randy Mackay
38478638de
Copter: aux switch for enable/disable proximity based avoidance
2016-12-20 19:48:02 +09:00
Randy Mackay
5f0a4c2097
Copter: integrate non-GPS avoidance into althold
2016-12-20 19:48:00 +09:00
Randy Mackay
377a747065
Copter: minor format fix for fall through for payload-place
2016-12-19 17:01:19 +09:00
Randy Mackay
2371b05696
Copter: init avoid-adsb and prec-loiter enabled from switch positions
...
Without this there could be a mismatch between the switch position and whether the feature is enabled/disabled
2016-12-19 17:01:16 +09:00
Randy Mackay
2365036e5c
Copter: move #if within case statement in switches.cpp
...
This removes some compile warnings when features are disabled
2016-12-19 17:01:12 +09:00
Randy Mackay
70feff487e
Copter: format fixes to switches.cpp
...
No functional change
2016-12-19 17:01:09 +09:00
Randy Mackay
a43229de0f
Copter: fix z-axis accel parameter description
2016-12-19 17:01:06 +09:00
priseborough
38ad778ff1
make.inc: Add EKF3 and remove EKF1 library from make.inc files
2016-12-19 08:07:10 +11:00
Andrew Tridgell
c3b9dbf5c8
ArduCopter: Add EKF3 and remove EKF1
2016-12-19 08:07:09 +11:00
Randy Mackay
c846cc249d
Copter: fix heli pos-hold run-up-complete issue
2016-12-15 19:00:21 +09:00