Commit Graph

3320 Commits

Author SHA1 Message Date
Randy Mackay 9f03e21f81 Copter: remove low-level handling of mission cmds
Now handled by AP_Mission
2014-03-19 12:10:04 +09:00
Randy Mackay 5d568502a0 Copter: instantiate AP_Mission object 2014-03-19 12:10:03 +09:00
Randy Mackay 1bad6a4b15 Copter: add AP_Mission object parameter
Remove global command_total and command_index parameters
2014-03-19 12:10:01 +09:00
Randy Mackay 0d23c3b910 Copter: initialise vertical speed for Loiter mode 2014-03-17 10:17:57 +09:00
Holger Steinhaus 39df609235 Copter: fixed vertical speed init for ALT_HOLD mode 2014-03-17 10:12:35 +09:00
Andrew Tridgell 43d009e3a5 Copter: set 2nd GPS as secondary 2014-03-08 21:48:18 +11:00
Randy Mackay 9287e28307 Copter: bug fix display of PerfMon log's num long loops 2014-03-08 15:17:03 +09:00
Randy Mackay 54e131cf1f Copter: re-enable CLI for Pixhawk 2014-03-08 15:17:02 +09:00
Randy Mackay 6efc26d3a6 Copter: restore mount's mode to default after ROI completes 2014-03-05 16:02:14 +09:00
Randy Mackay 7992a1a7d3 Copter: disable the CLI by default
This is unfortunate but master's flash size is over the APM2 limit
2014-03-05 12:03:56 +09:00
Randy Mackay 4f963e7795 Copter: move report_compass out of the CLI
This function is also used by compassmot.  Having it strictly part of
the CLI causes a compile error when the CLI is disabled
2014-03-05 12:01:45 +09:00
Randy Mackay 00f9843e40 Copter: remove CLI tests for gps, logging, radio
Required to shrink the firmware down so that it can fit on the APM2
boards
2014-03-05 11:44:09 +09:00
Randy Mackay fc85228d09 Copter: remove CLI set
Frees about 1k of flash
2014-03-04 22:23:57 +09:00
Randy Mackay 3a934357e9 Copter: remove unused reset_land_detector 2014-03-04 22:23:55 +09:00
Randy Mackay c56f521897 Copter: ch6 tuning of RC_FEEL_RP 2014-03-04 22:23:53 +09:00
Randy Mackay e89600afe3 Copter: integrate smoothing gain into flight modes 2014-03-04 22:23:52 +09:00
Randy Mackay 3910ab807f Copter: replace input filtering with smoothing gain 2014-03-04 22:23:50 +09:00
Randy Mackay 429e8d5e50 Copter: integrate AttControl feel param 2014-03-04 22:23:49 +09:00
lthall a9db399f60 Copter: integrate AttControl input shaping 2014-03-04 21:52:20 +09:00
Andrew Tridgell 86fa82f767 Copter: only send GPS2_RAW when we have a 2nd GPS 2014-03-03 07:05:47 +11:00
Andrew Tridgell 3de574e5dc Copter: disable GPS2 in HIL 2014-02-27 08:16:20 +11:00
Andrew Tridgell 37394b30ee Copter: added support for 2nd GPS 2014-02-26 09:40:29 +11:00
Andrew Tridgell 2fcbdc4056 Copter: pass fix type to gps->setHIL() 2014-02-25 21:11:10 +11:00
Andrew Tridgell ffcc77a21f Copter: fix for HIL API change 2014-02-23 08:18:20 +11:00
Randy Mackay d992483bf5 Copter: add EKF params to full param list 2014-02-21 13:51:22 +09:00
Randy Mackay 797212c7ab Copter: remove remnant of cli compassmot 2014-02-19 16:04:10 +11:00
Randy Mackay 2457dbf0cd Copter: more checks before starting compassmot
additional checks that copter is landed and that compassmot calibration
isn't already being performed.
Returns ACK to ground station as process begins
2014-02-19 16:04:03 +11:00
Andrew Tridgell 76b60a1a52 Copter: added compassmot over MAVLink
use the MAVLink interact code to allow for compassmot over MAVLink

Pair-Programmed-With: Randy Mackay <rmackay9@yahoo.com>
2014-02-19 16:04:00 +11:00
Andrew Tridgell a45d77f893 Copter: set the ahrs.set_armed() flag 2014-02-19 10:53:44 +11:00
Andrew Tridgell 0cbe64bc5e Copter: use Log_Write_Baro()
this gives the raw pressure and temperature, which is useful for
analysis, plus allows for more accurate log replay
2014-02-19 09:22:45 +11:00
Randy Mackay fdae812814 Copter: DO_SET_ROI persists across waypoints
Users should add a DO_SET_ROI command with zero lat, lon and alt to
restore the yaw control to the default control (which is normally
look-at-next-wp)
2014-02-18 21:36:02 +09:00
Randy Mackay bf68edd01c Copter: bug fix to 50hz logging rate
Caught by Emile Castelnuovo
2014-02-17 22:25:02 +09:00
Randy Mackay d9b7559379 Copter: remove duplicate #define from APM_Config.h 2014-02-17 16:44:47 +09:00
Randy Mackay 4e1c51aa65 Copter: bug to disarm at end of mission 2014-02-17 16:43:49 +09:00
Andrew Tridgell ce66314f40 Copter: fixed HIL build on PX4 2014-02-17 12:34:34 +11:00
proficnc bbf5c11c8a Update Parameters.pde
Moved Disabled to the bottom of the drop-down box for selecting logging types.
This is to reduce the potential for someone to accidentally select Disabled when they intend on selecting Default.
2014-02-17 10:02:45 +11:00
Randy Mackay 00913ffe1b Copter: throttle rate to simple P controller
Saves at least 15bytes of RAM
2014-02-16 13:35:40 +11:00
Randy Mackay 9444ba7ea8 TradHeli: init roll/pitch input filter 2014-02-16 13:35:33 +11:00
Randy Mackay b259510095 Copter: init roll/pitch input filters 2014-02-16 13:35:30 +11:00
Andrew Tridgell 9c66dd0d2c Copter: change to Compass::learn_offsets 2014-02-16 13:22:13 +11:00
Randy Mackay aab9b30bf6 Copter: replace APM_PI with AC_P
Saves about 90bytes of RAM
2014-02-15 06:09:08 +11:00
Randy Mackay 3f10a84a2a Copter: remove accel calibration from cli
Also remove compass, flight mode, optical flow, radio and ch6 tuning
knob setup from cli to free up 3.5k of flash
2014-02-15 06:09:08 +11:00
Randy Mackay 3ccd1ad170 Copter: integrate AttControl method name changes 2014-02-15 06:09:08 +11:00
Randy Mackay 6880a6db80 TradHeli: integrate AttControl method name changes 2014-02-15 06:09:08 +11:00
lthall 7ed5080dc9 Copter: simplify get_angle_targets_for_reporting 2014-02-15 06:09:08 +11:00
lthall 41dcfae7c0 AC Acro and Sport: Angle limit code update 2014-02-15 06:09:08 +11:00
Andrew Tridgell ebf6d47830 Copter: disable direct tuning, we need accessors for this 2014-02-15 05:48:24 +11:00
Andrew Tridgell 2fbdf7f718 Copter: fixed build for AHRS API changes 2014-02-15 05:48:22 +11:00
Andrew Tridgell a8dc1be4de Copter: fixed non-EKF copter build 2014-02-15 05:48:21 +11:00
Randy Mackay 20989fd5e9 Copter: allow ch6 tuning of EKF 2014-02-15 05:48:20 +11:00
Andrew Tridgell 86afd13f12 Copter: use GPS AIRBORNE_4G 2014-02-15 05:48:17 +11:00
Andrew Tridgell a112694a50 Copter: added AUX switch option for enable/disable EKF 2014-02-15 05:48:17 +11:00
Andrew Tridgell 5606e2f4a7 Copter: enabled EKF and SIMSTATE flash logging 2014-02-15 05:48:16 +11:00
Andrew Tridgell 6a9189a6a5 Copter: enable AHRS2 mavlink message 2014-02-15 05:48:16 +11:00
Andrew Tridgell 99b3517a47 Copter: use AP_InertialNav_NavEKF when available 2014-02-15 05:48:15 +11:00
Andrew Tridgell 686d1b9124 Copter: changes set_home_position() to setup_home_position() for Inav 2014-02-15 05:48:15 +11:00
Andrew Tridgell c6e25483b4 Copter: use a common home with AHRS 2014-02-15 05:48:15 +11:00
Andrew Tridgell 9cc00d20eb Copter: fixed for removed DCM blowup counts 2014-02-15 05:29:48 +11:00
Andrew Tridgell 79a29d12f2 Copter: fixed build for new AHRS API 2014-02-15 05:29:47 +11:00
Andrew Tridgell af5a3dff93 Copter: enable use of AHRS_NavEKF 2014-02-15 05:29:47 +11:00
Andrew Tridgell 24f2ac20de Copter: removed HIL_MODE_ATTITUDE
this really can't work any more, as AHRS can't support it
2014-02-15 05:29:46 +11:00
Andrew Tridgell 644bf71f56 Copter: fixed build for InertialNav change 2014-02-15 05:29:46 +11:00
Randy Mackay 006cf58b2d Copter: fix merge error for g.angle_max 2014-02-15 05:27:51 +11:00
Randy Mackay 5e8fede19e Copter: comment fix to Attitude.pde 2014-02-15 05:27:50 +11:00
Randy Mackay aa79e22ce0 Drift: bug fix for throttle 2014-02-15 05:27:50 +11:00
Randy Mackay 10a0303706 Copter: smooth throttle transition between flight modes 2014-02-15 05:27:50 +11:00
Randy Mackay 0df1dc267b Copter: integrate WPNav constructor change 2014-02-15 05:27:50 +11:00
Randy Mackay 1b8055aed9 Copter: remove unused t7 const
Saves 4 bytes
2014-02-15 05:27:49 +11:00
Randy Mackay 2b3995ccb5 Copter: integrate refs for RC_Channels in motor defs 2014-02-15 05:27:49 +11:00
Randy Mackay 9f78f65413 TradHeli: integrate leonard's control_acro fixes 2014-02-15 05:27:49 +11:00
Randy Mackay bf6bb59cb4 Copter: Leonard's control_acro fixes
get_pilot_desired_angle_rates returns bf rate targets as floats
2014-02-15 05:27:49 +11:00
Randy Mackay 6380a39d3a Copter: remote update_trig from main code 2014-02-15 05:27:48 +11:00
Randy Mackay 75b20bde7c Copter: control_acro, drift use trig from ahrs 2014-02-15 05:27:48 +11:00
Randy Mackay aa4c3eaffe Copter: resolve RTL state compiler warnings 2014-02-15 05:27:48 +11:00
Randy Mackay 12a4ce70fd Copter: remove control_roll, pitch, yaw variables 2014-02-15 05:27:47 +11:00
Randy Mackay 2c1ec9d0c0 Copter: remove control_roll, pitch, yaw from control files 2014-02-15 05:27:47 +11:00
Randy Mackay e8c4e8a472 Copter: integrate get_angle_target_for_reporting
Used for logging and sending to GCS
2014-02-15 05:27:47 +11:00
Randy Mackay d579325e2a Copter: add get_angle_targets_for_reporting
This returns the current earth frame roll, pitch and yaw targets which
can depend upon the flight mode
2014-02-15 05:27:47 +11:00
Randy Mackay 1acd33e290 Copter: do_yaw takes yaw target from AttControl 2014-02-15 05:27:47 +11:00
Randy Mackay ea1158a9d5 Copter: remove unused config 2014-02-15 05:27:47 +11:00
Randy Mackay 9ef3fd850f Copter: remove use of SUPER_SIMPLE definition 2014-02-15 05:27:47 +11:00
Randy Mackay b37b0c5061 TradHeli: remove use of throttle_mode 2014-02-15 05:27:47 +11:00
Randy Mackay b0673d693b Copter: move set_mode, to flight_mode.pde 2014-02-15 05:27:47 +11:00
Randy Mackay b8bb477731 Copter: add flight_mode.pde 2014-02-15 05:27:47 +11:00
Randy Mackay 38d5148b99 Copter: remove reset_I_all
Each controller should reset the I terms as needed
2014-02-15 05:27:47 +11:00
Randy Mackay 72a3f14561 Copter: move reset_optflow_I to control_ofloiter 2014-02-15 05:27:46 +11:00
Randy Mackay 7afa0a767c Copter: correct circle rate tuning to use circle_nav 2014-02-15 05:27:46 +11:00
Randy Mackay 3e399fd830 Copter: remove unused parameters 2014-02-15 05:27:46 +11:00
Randy Mackay 81c7df7678 Copter: comment fix 2014-02-15 05:27:46 +11:00
Randy Mackay 0e0d02cd6d Copter: remove unused init from sport mode 2014-02-15 05:27:46 +11:00
Randy Mackay 3d926a6943 Copter: GCS_Mavlink gets gyro direct from imu 2014-02-15 05:27:46 +11:00
Randy Mackay f46ff2b44e Copter: remove unused defines 2014-02-15 05:27:46 +11:00
Randy Mackay fe26af86de Copter: crash check works with flip flight mode 2014-02-15 05:27:46 +11:00
Randy Mackay 22280e1c57 Copter: integrate surface_tracking to control_althold 2014-02-15 05:27:46 +11:00
Randy Mackay 3824f528ea Copter: get angle_boost direct from pos_control 2014-02-15 05:27:46 +11:00
Randy Mackay 90c5fe4be4 Copter: surface_tracking takes current_alt_target param 2014-02-15 05:27:46 +11:00
Randy Mackay 989a03a643 Copter: remove unused flags and variables 2014-02-15 05:27:45 +11:00
Randy Mackay 174318a2a9 Copter: remove set_nav_mode 2014-02-15 05:27:45 +11:00
Randy Mackay aedb4136de Copter: update_thr_cruise removed from control_stabilize 2014-02-15 05:27:45 +11:00
Randy Mackay 223c6fd4de Copter: remove deadwood, update_thr_cruise always runs 2014-02-15 05:27:45 +11:00
Randy Mackay 2870d043f8 Copter: remove unused drift.pde
moved to control_drift.pde
2014-02-15 05:27:45 +11:00
Randy Mackay 1cd678f684 Copter: compiler warning for control_autotune 2014-02-15 05:27:45 +11:00
Randy Mackay d3a126d078 Copter: integrate slew_yaw into control_auto 2014-02-15 05:27:45 +11:00
Randy Mackay 364946cb7f Copter: AttControl param prefix shortened to ATC 2014-02-15 05:27:45 +11:00
Randy Mackay 814157324d Copter: APM_Config AUTOTUNE_ENABLED 2014-02-15 05:27:45 +11:00
Randy Mackay 89a50ed445 Copter: comment fix for control_stabilize 2014-02-15 05:27:45 +11:00
Randy Mackay 0107b2a95d Copter: remove unused auto_tune.pde 2014-02-15 05:27:44 +11:00
Randy Mackay aec67cd3df Copter: integrate control_autotune 2014-02-15 05:27:44 +11:00
Randy Mackay 823485f763 Copter: add control_autotune.pde 2014-02-15 05:27:44 +11:00
Randy Mackay b87852ee2e Copter: remove unused flip.pde 2014-02-15 05:27:44 +11:00
Randy Mackay d90d3d8dca Copter: integrate control_flip 2014-02-15 05:27:44 +11:00
Randy Mackay 47deb795bd Copter: add control_flip 2014-02-15 05:27:44 +11:00
Randy Mackay 1648ecc6e5 Copter: bug fix for heli_control_acro throttle 2014-02-15 05:27:44 +11:00
Randy Mackay c73c9f03a5 Copter: bug fix for control_acro throttle 2014-02-15 05:27:44 +11:00
Randy Mackay 164bd10ef0 TradHeli: init targets when entering acro 2014-02-15 05:27:44 +11:00
Randy Mackay fdf41219ca Copter: init targets when entering acro 2014-02-15 05:27:44 +11:00
Randy Mackay 9f33873b2e Copter: typo in control_acro.pde 2014-02-15 05:27:44 +11:00
Randy Mackay ec989c720c Copter: integrate heli_control_acro 2014-02-15 05:27:43 +11:00
Randy Mackay 5aaa01ab30 TradHeli: heli_control_acro 2014-02-15 05:27:43 +11:00
Randy Mackay 922dff0514 Copter: integrate heli_control_stabilize 2014-02-15 05:27:43 +11:00
Randy Mackay 41ab2547d7 Copter: control_stabilize remove takeoff_complete 2014-02-15 05:27:43 +11:00
Randy Mackay bca309eb1e Copter: replace takeoff_complete with landed_complete 2014-02-15 05:27:43 +11:00
Randy Mackay 2940688301 TradHeli: heli_control_stabilize 2014-02-15 05:27:43 +11:00
Randy Mackay 91124bcf8b TradHeli: remove get_heli_rate_yaw from main code 2014-02-15 05:27:43 +11:00
Randy Mackay 3b0de0d23d Copter: integrate trad heli AttControl 2014-02-15 05:27:43 +11:00
Randy Mackay ef666c73ab Copter: remove Position mode 2014-02-15 05:27:42 +11:00
Randy Mackay c632211c8c Copter: get_of_roll, get_of_pitch moved to control_ofloiter 2014-02-15 05:27:42 +11:00
Randy Mackay 837061fd65 Copter: control_ofloiter added 2014-02-15 05:27:42 +11:00
Robert Lefebvre c561d6bb9e Small comment change. 2014-02-15 05:27:42 +11:00
Randy Mackay 54be8402a2 Copter: integrate control_guided 2014-02-15 05:27:42 +11:00
Randy Mackay 798add0b5c Copter: remove guided from control_auto.pde 2014-02-15 05:27:42 +11:00
Randy Mackay 0e41b01ad0 Copter: control_guided added 2014-02-15 05:27:41 +11:00
Randy Mackay 245bcd7c2c Copter: removed althold, drift, sport from control_stabilize 2014-02-15 05:27:41 +11:00
Randy Mackay d85c57999d Copter: althold moved to control_althold.pde 2014-02-15 05:27:41 +11:00
Randy Mackay 2e6327be06 Copter: sport moved to control_sport.pde 2014-02-15 05:27:41 +11:00
Randy Mackay 70c8b622e2 Copter: drift moved to control_drift 2014-02-15 05:27:41 +11:00
Randy Mackay 212ced63f6 Copter: bug fix for do_loiter_time alt target 2014-02-15 05:27:41 +11:00
Randy Mackay 37bde3406d Copter: remove comments 2014-02-15 05:27:41 +11:00
Randy Mackay 70d1e53b74 Copter: commands_logic to use auto_rtl 2014-02-15 05:27:41 +11:00
Randy Mackay 1457a9d31a Copter: auto_mode to global scope 2014-02-15 05:27:41 +11:00
Randy Mackay 7970d7112f Copter: add rtl to control_auto 2014-02-15 05:27:41 +11:00
Randy Mackay 1f07c2efe0 Copter: remove old circle 2014-02-15 05:27:41 +11:00
Randy Mackay bae867712d Copter: integrate circle mission command 2014-02-15 05:27:41 +11:00
Randy Mackay ff2b8ff6f2 Copter: add circle to control_auto 2014-02-15 05:27:40 +11:00
Randy Mackay cbf6e6a945 Copter: mostly working circle flight mode 2014-02-15 05:27:40 +11:00
lthall 8268e27d49 Copter: ACRO further clean up 2014-02-15 05:27:40 +11:00
Randy Mackay af890e0f8d Copter: add AC_Circle include 2014-02-15 05:27:40 +11:00
Randy Mackay 83a767f3db Copter: control_circle.pde added 2014-02-15 05:27:40 +11:00
Randy Mackay 3b9ae02966 Copter: add Circle parameter 2014-02-15 05:27:40 +11:00
lthall e979263c56 Copter: ACRO clean up and mistake fixes 2014-02-15 05:27:40 +11:00
lthall ed7dd58c01 this is a test 2014-02-15 05:27:40 +11:00
Randy Mackay 8b9eb7ab2b Copter: WPNav constructor change 2014-02-15 05:27:39 +11:00
Randy Mackay b1449d59ee Copter: resolve conflict between control_auto, control_rtl states 2014-02-15 05:27:39 +11:00
Randy Mackay 055ce4e53e Copter: integrate control_rtl 2014-02-15 05:27:39 +11:00
Randy Mackay 689e92eb33 Copter: control_rtl 2014-02-15 05:27:39 +11:00
Randy Mackay bd88ed8a53 Copter: LAND at stopping point instead of curr pos 2014-02-15 05:27:39 +11:00
Randy Mackay cdc935b66d Copter: implement auto_land with Loiter controller 2014-02-15 05:27:39 +11:00
Randy Mackay 93d43f8ca5 Copter: remove unused var from acro 2014-02-15 05:27:39 +11:00
Randy Mackay 32b8f80510 Copter: Acro flight mode from Leonard 2014-02-15 05:27:38 +11:00
Randy Mackay cdc0f8e414 Copter: use new control_auto takeoff and land 2014-02-15 05:27:38 +11:00
Randy Mackay 0dabc0c577 Copter: control_auto - takeoff, land 2014-02-15 05:27:38 +11:00
Randy Mackay eec62cb16a Copter: control_loiter initialises alt target 2014-02-15 05:27:38 +11:00
Randy Mackay 6ba91369ff Copter: split control_land into gps and non-gps 2014-02-15 05:27:38 +11:00
Randy Mackay 011de6683e Copter: land_detector moved to control_land 2014-02-15 05:27:38 +11:00
Randy Mackay 96c61fcf28 Copter: removed get_throttle_land
Now in the control_land.pde
2014-02-15 05:27:38 +11:00
Randy Mackay 3b003ea3e6 Copter: remove setting of nav mode 2014-02-15 05:27:38 +11:00
Randy Mackay 924e2a66ce Copter: split control_auto into separate file 2014-02-15 05:27:38 +11:00
Randy Mackay e27f4c1c13 Copter: split control_stabilize into land, rtl, loiter 2014-02-15 05:27:38 +11:00
Randy Mackay d92e894af6 Copter: get_throttle_surface_tracking returns climb rate 2014-02-15 05:27:37 +11:00
Randy Mackay c92de71212 Copter: control_stabilize, - integrate changes to get_throttle_surface_tracking 2014-02-15 05:27:37 +11:00
Randy Mackay f3bcbb2ce4 Copter: remove setting roll, pitch yaw modes in set_mode 2014-02-15 05:27:37 +11:00
Randy Mackay d70862e44b Copter: remove case that does nothing 2014-02-15 05:27:37 +11:00
Randy Mackay 65f7bf92f4 Copter: replace yaw_mode with auto_yaw_mode 2014-02-15 05:27:37 +11:00
Randy Mackay 1b714defcc Copter: move auto to control_auto.pde and fix yaw 2014-02-15 05:27:37 +11:00
Randy Mackay 8e40cbdd7f Copter: disable ch7/8 feature to point at armed yaw 2014-02-15 05:27:37 +11:00
Randy Mackay 4540fb3fef Copter: remove set roll-pitch, yaw, thr modes for ACRO, LOITER 2014-02-15 05:27:36 +11:00
Randy Mackay dc6f622d48 Copter: move NTUN logging to 10hz loop 2014-02-15 05:27:36 +11:00
Randy Mackay 8e08a1f8ab Copter: remove debug 2014-02-15 05:27:36 +11:00
Randy Mackay f5c305e960 Copter: control_stabilize rename wp_nav calls 2014-02-15 05:27:36 +11:00
Randy Mackay b29a963fd6 Copter: remove unused Attitude.pde functions 2014-02-15 05:27:36 +11:00
Randy Mackay 0a2adbac1b Copter: renaming functions after moving xy control 2014-02-15 05:27:36 +11:00
Randy Mackay 9843e93308 Copter: control_stabilize - much renaming as xy pos controller moves 2014-02-15 05:27:36 +11:00
Randy Mackay 5fd9410ff5 Copter: much renaming as xy pos controller moves 2014-02-15 05:27:36 +11:00
Randy Mackay f0c538f8fb Copter: control_stabilize comment update 2014-02-15 05:27:36 +11:00
Randy Mackay d380e6b4d3 Copter: integrate add ref to AC_Pos_Control from WP_Nav 2014-02-15 05:27:35 +11:00
Randy Mackay aaa62eeb28 Copter: integrated simpler init loiter from WP_Nav 2014-02-15 05:27:35 +11:00
Randy Mackay 49367c5a30 Copter: GCS.h include fix 2014-02-15 05:27:35 +11:00
Randy Mackay eddb593ee2 Copter: althold uses high level angle controller 2014-02-15 05:27:35 +11:00
Randy Mackay bdf95bd835 Copter: stabilize uses high level angle controller 2014-02-15 05:27:35 +11:00
Randy Mackay a52e220724 Copter: add loiter controller to onion
Also add ignore_checks to flight mode initialisation
2014-02-15 05:27:35 +11:00
Randy Mackay 7e37b16ccb Copter: move update_flight_mode to fast loop 2014-02-15 05:27:35 +11:00
Randy Mackay 784f7385b5 Copter: add attitude and pos control params 2014-02-15 05:27:35 +11:00
Randy Mackay b34664ea07 Copter: remove unused altitude error 2014-02-15 05:27:34 +11:00
Randy Mackay e69eeea246 Copter: log alt target from PosControl 2014-02-15 05:27:34 +11:00
Randy Mackay 44e731ea40 Copter: control_stabilize reports alt target 2014-02-15 05:27:34 +11:00
Randy Mackay abb42bcb41 Copter: remove unused run_rate_controllers 2014-02-15 05:27:34 +11:00
Randy Mackay e1bf4af1b8 Copter: bug fix to set angle_boost in stab mode 2014-02-15 05:27:34 +11:00
Randy Mackay 77c38f4de4 Copter: integrate init take-off 2014-02-15 05:27:34 +11:00
Randy Mackay 2c03a3a3c6 Copter: set pos_control.set_dt 2014-02-15 05:27:34 +11:00
Randy Mackay faf1e99f1a Copter: surface tracking to use pos_control 2014-02-15 05:27:33 +11:00
Randy Mackay 5649b7f4d9 Copter: integrate AC_PosControl constructor changes 2014-02-15 05:27:33 +11:00
Randy Mackay 4840ce238a Copter: skeleton AltHold flight mode 2014-02-15 05:27:33 +11:00
Randy Mackay 7784fc7645 Copter: update pos_control's hover throttle 2014-02-15 05:27:33 +11:00
Randy Mackay 33552b63d8 Copter: early integration of AC_PosControl 2014-02-15 05:27:33 +11:00
Randy Mackay 3146299a0f Copter: move control_stabilize yaw input higher 2014-02-15 05:27:33 +11:00
Randy Mackay 7f56b28767 Copter: move thr control to control_stabilize 2014-02-15 05:27:33 +11:00
Randy Mackay 2253cf9769 Copter: run main loop at 400hz for pixhawk 2014-02-15 05:27:33 +11:00
Randy Mackay 3a78263921 Copter: skeleton init call for all flight modes 2014-02-15 05:27:33 +11:00
Randy Mackay 0431b7e1d4 Copter: bug fix for stabilize_run's yaw control 2014-02-15 05:27:33 +11:00
Randy Mackay 1fdfa751e6 Copter: integrate replacement of timers with set_dt 2014-02-15 05:27:33 +11:00
Randy Mackay c8e277703d Copter: add acro_run skeleton 2014-02-15 05:27:33 +11:00
Randy Mackay c2ca5c46b8 Copter: correct auto_run 2014-02-15 05:27:32 +11:00
Randy Mackay 1cf065e1df Copter: remove debug for control_stabilize 2014-02-15 05:27:32 +11:00
Randy Mackay cbe56bba25 Copter: integrate AC_AttitudeControl 2014-02-15 05:27:32 +11:00
Randy Mackay 7b9a48107e Copter: move angle_max parameter to AP_Vehicle 2014-02-15 05:27:32 +11:00
Andrew Tridgell 2bf7a46c9b Copter: log power status on Pixhawk 2014-02-15 05:00:09 +11:00
Andrew Tridgell 0a3476bbf1 Copter: change to new board_voltage() API 2014-02-14 21:50:59 +11:00
Randy Mackay bd0cb83263 Copter: release notes for AC3.1.2 2014-02-13 21:21:56 +09:00
Randy Mackay 78b31f4b16 Copter: readme file renamed and directs to wiki 2014-02-12 21:03:45 +09:00
Randy Mackay a5e98c11ad Copter: Release notes for AC3.1.2-rc2 2014-02-12 20:20:10 +09:00
Randy Mackay 2219f21744 Copter: add RC_FEEL_RP parameter
Values from 0 ~ 100 control amount of filtering on roll and pitch input.
100 = no filter so crisp feel, 0 = a lot of filtering so very sluggish
response
2014-02-12 16:28:41 +09:00
Randy Mackay 89b222f1cf Copter: only report gps glitch when usb disconnected 2014-02-11 11:43:24 +09:00
Randy Mackay 8f5585423c Copter: use ahrs trig values 2014-02-08 18:16:49 +09:00
Randy Mackay 5bcc2f5ca5 Copter: version to AC3.2-dev 2014-02-08 11:32:59 +09:00
Randy Mackay 69c165b3b3 Copter: correct release note dates 2014-02-07 22:30:19 +09:00
Randy Mackay ac9f0b5fd1 Copter: remove setup_aux_channels
moved to individual motors libraries
2014-02-07 22:04:28 +09:00
Randy Mackay 91b78c0cbe Copter: bug fix for duplicate single and coax params 2014-02-07 17:07:51 +09:00
Dneault 4b3699f985 Copter: coax allows ch5 and higher for do_set_servo cmd 2014-02-07 12:36:22 +09:00
Randy Mackay 5d929351ca Copter: removed unused servo3, servo4 from coax 2014-02-07 12:36:17 +09:00
Randy Mackay e6f4fb4828 Copter: moved coax servo set-up to AP_MotorCoax 2014-02-07 12:36:11 +09:00
Dneault f48e106271 Copter: add coax heli support
Motors should be attached to RCOutputs 1 and 2, Flaps should be connected
to RC outputs 3 and 4
2014-02-07 12:36:04 +09:00
Andrew Tridgell dc6433d63c Copter: ensure that motor channels cannot be used for auxillary functions
disable RC_Channel_aux channels that are used for motors. This perhaps
should be done by the AP_Motors library, but for now this is simpler
2014-02-06 21:34:47 +11:00
Andrew Tridgell 5a3a7f1cec Copter: use new RC_Channels API 2014-02-06 10:17:16 +11:00
Andrew Tridgell 415db390af Copter: check param table on startup 2014-01-31 13:10:00 +11:00
Randy Mackay e13984f6c1 Copter: remove unused compat.pde entries 2014-01-30 14:33:55 +09:00
Randy Mackay a078d00e6a Copter: firmware to AC3.1.2-rc1 2014-01-30 14:00:20 +09:00
Randy Mackay 214a859e97 Copter: remove unused RADX100 definition
The real purpose of this small change is to kick off the autobuilder for
the AC3.1.1 release.
2014-01-26 13:41:14 +09:00
Randy Mackay 3ba5b70736 Copter: fix compiler warning from motorsync test 2014-01-26 11:08:34 +09:00
Randy Mackay a45b9cbe9a Copter: remove unused RELAY_TOGGLE definition 2014-01-26 10:10:02 +09:00
Stefan a6b6d46a30 Copter: Update ReleaseNotes.txt 2014-01-22 15:05:31 +09:00
Ju1ien 311bba1419 Copter: landing_complete stays true until thr is raised
The idea of the fix is we can't leave land while throttle is 0 and then
we ignore the baro and it's disturbances.
2014-01-22 14:38:35 +09:00
Randy Mackay 7fcd847f77 Copter: reword FRAME parameter's @Value 2014-01-22 11:35:35 +09:00
Randy Mackay 231e3ccaac Copter: add NewX @Value for FRAME parameter 2014-01-22 10:57:17 +09:00
Randy Mackay dee5fb212a Copter: remove dup definition of FRAME_ORIENTATION
Ideally the frame orientation parameter should be moved to the motors
class
2014-01-21 21:44:17 +09:00
Randy Mackay f7f8691ca3 Copter: remove frame setup through CLI 2014-01-21 21:42:59 +09:00
Randy Mackay 34f14a7c13 Copter: version to AC3.1.1-rc2
This update applies to pixhawk only
2014-01-21 21:23:11 +09:00
Randy Mackay 3c7e7db8a7 Copter: AC3.1.1-rc2 release notes 2014-01-21 21:22:42 +09:00
Andrew Tridgell e8b8cc1a5d Copter: converted to AP_ServoRelayEvents 2014-01-20 17:06:29 +11:00
Andrew Tridgell e3804e2846 Copter: fixes for AP_Relay API change 2014-01-20 17:06:29 +11:00
Andrew Tridgell 50a90a1043 Copter: enable AP_BoardConfig 2014-01-20 17:06:28 +11:00
Randy Mackay 111d0854a7 Copter: motorsync cli test 2014-01-18 17:00:43 +09:00
Randy Mackay 0f957bdc5a Copter: lean angle arming check 2014-01-17 17:31:28 +09:00
Randy Mackay a7f03619f2 Copter: add inav vs baro arming check
In-flight Barometer sanity checking will be a more complete solution but
until then this should catch some bad pre-flight barometer behaviour
2014-01-17 17:21:42 +09:00
Andrew Chapman b7eab7ea22 Copter: Added GCS feedback for save_trim()
Trim save gives no feedback, so I've added a gcs_send_text() call to
print "Trim saved" so the user knows to re-center trims again
2014-01-16 14:23:19 +09:00
Randy Mackay 8a29d63d89 Copter: faster baro calibration when arming
using update_calibration() instead of the full calibrate() cuts
1.5seconds of the arming time
2014-01-15 23:28:24 +09:00
Randy Mackay ae4f368f16 Copter: allow ch6 tuning of loiter speed 2014-01-15 15:22:52 +09:00
Randy Mackay 6d55895d30 Copter: simplify do-set-servo mission command
This potentially changes the servo number that must be supplied if using
an APM1 but it now shares the same logic as arduplane and also adds
protection that the servo is not attached to the motor.
removed debug message from previous commit.
2014-01-15 14:36:50 +09:00
Randy Mackay 67c2bc7d0b Copter: add support for MAV_CMD_DO_SET_SERVO 2014-01-15 14:03:04 +09:00
Randy Mackay a9f1a2ee5e Copter: disarm on land even if pilot throttle not zero
default behaviour remains as before, this is an compile time option only
2014-01-15 11:31:00 +09:00
Randy Mackay ac99d2d19a Copter: update AC3.1.1-rc1 release notes 2014-01-14 21:56:15 +09:00
Randy Mackay a3527ade61 Copter: move EARTH_FRAME definition to defines.h
defines.h is for defining enumerations and other unchanging values while
config.h is for changeable values like parameter defaults, enabling or
disabling sensors.
2014-01-14 21:53:13 +09:00
Randy Mackay 66859686a0 Copter: remove some unused definitions 2014-01-14 21:21:54 +09:00
Randy Mackay dd5521aa06 Copter: update version to AC3.1.1-rc1 2014-01-14 21:01:54 +09:00
Randy Mackay b1525a421b Copter: AC3.1.1-rc1 release notes 2014-01-14 21:01:40 +09:00
Andrew Tridgell 4f2ce31cb7 Copter: log PX4 and NuttX versions in logs 2014-01-14 15:38:51 +11:00
Andrew Tridgell e52f8d6598 Copter: prevent log corruption during log creation 2014-01-14 14:37:48 +11:00
Andrew Tridgell 8a41b18a1f Copter: use uppercase names on SD card where possible 2014-01-14 12:46:26 +11:00
Bill Bonney a6078cd281 Copter: Fix SYSID ranges to support GCS display of param correctly 2014-01-14 10:32:42 +09:00
Randy Mackay 138c2803be Copter: combine NTUN and INAV dataflash msgs 2014-01-13 22:00:11 +09:00
Randy Mackay 1e8a79eeaf Copter: add TimeMS, InavAlt to CTUN df msg 2014-01-13 21:31:43 +09:00
Randy Mackay 97b18314ac Copter: add time to ATT, MAG, CURR dataflash msgs 2014-01-13 20:46:54 +09:00
Randy Mackay df9d1614e2 Copter: remove PID logging
Almost never used and eats up limited log description space
2014-01-13 17:23:39 +09:00
Randy Mackay 5e0ddd299f Copter: disable OPTFLOW for SITL 2014-01-13 17:11:27 +09:00
Randy Mackay 61f319ce38 Copter: disable OPTFLOW for PX4/Pixhawk 2014-01-13 12:02:03 +09:00
Randy Mackay b3d20bb8aa TradHeli: Drift mode to use heli manual throttle 2014-01-10 11:06:06 +09:00
Robert Lefebvre 8b36c59d8b TradHeli: rename Stab_Col parameters
With H_ prefix they appear with the rest of the tradheli specific params in the parameter list.
2014-01-10 10:51:48 +09:00
Robert Lefebvre 794890884c TradHeli: enable Landing Collective when we are not moving
This prevents full negative pitch when touching down in Alt Hold or Auto-Landing.
2014-01-10 10:50:58 +09:00
Robert Lefebvre 531a9f4f25 TradHeli: disable AutoTune for Tradheli compile
We need the flash space, and this probably won't work for tradheli anyway since tradheli needs most of the control from Feedforward rather than P term.  And D-term is very very bad.
2014-01-10 10:50:09 +09:00
Randy Mackay 9f2f44f0f6 Copter: integrate shrunken optflow 2014-01-09 12:31:53 +09:00
Randy Mackay 1793ee804e Copter: remove armed check before logging 2014-01-07 22:43:49 +09:00
Randy Mackay 84881470b1 Copter: suspend logging while disarmed 2014-01-07 22:43:47 +09:00
Michael Oborne 757dd228d2 Copter: BugFix DO_SET_ROI returns Lat,Lon,Alt to GCS 2014-01-03 16:14:44 +09:00
Randy Mackay 99f851fc87 Copter: bugfix for starting in LOITER
Loiter's Roll-Pitch mode was not being set on start-up.
2013-12-30 17:18:10 +09:00
Andrew Tridgell 7c39d867bb Copter: use file based logs in SITL 2013-12-29 07:14:21 +11:00
Andrew Tridgell 97df2f64c9 Copter: use common available_memory() 2013-12-28 16:02:32 +11:00
Randy Mackay 02898cb46e Copter: replace APM with board in cli 2013-12-28 10:42:10 +09:00
Kevin Hester 2044300057 Copter: Split out prearm failures of low HDOP separately from !gps lock
(on the iris list there was some confusion on why the copter was blinking
yellow but yet they had gps lock)
2013-12-26 10:10:06 +09:00
Randy Mackay ab1bb6886c Copter: remove reference to COPTER_LEDS 2013-12-19 16:19:48 +09:00
Randy Mackay d362bb45fd Copter: move sensor init from setup(to init_ardupilot
This fixes a bug in which the external led was not being disabled if the
EPM was enabled (they share pins).  The cause of the problem was the EPM
was being initialised before it's parameters had been loaded
2013-12-19 14:12:19 +09:00
Lukasz cb17a5bdb6 Copter: Add RSSI_RANGE parameter
Added ability to rescale rssi input voltage. Useful for receivers like
FrSky which have 3.3V output.
2013-12-17 22:38:39 +09:00
Randy Mackay 21cda96f67 Copter: EPM enable/disable to APM_Config.h 2013-12-17 15:36:44 +09:00
ctech4285 2b5d8aa5b7 Copter: integrate EPM library 2013-12-17 15:36:42 +09:00
Andrew Tridgell 7f100ebe31 Copter: removed common functions 2013-12-17 12:00:46 +11:00
Andrew Tridgell edda76623f Copter: updates for DataFlash API changes 2013-12-17 11:51:36 +11:00
Andrew Tridgell dd749c1de3 Copter: when using file logs use "logs" directory 2013-12-17 11:51:36 +11:00
Andrew Tridgell 7642208c1a Copter: support MAVLink log download 2013-12-17 11:51:36 +11:00
Andrew Tridgell 9716e80e21 Copter: moved ap_message into GCS.h 2013-12-17 11:51:35 +11:00
Andrew Tridgell eb2cb0abe0 Copter: moved GCS.h to common library 2013-12-17 11:51:34 +11:00
Andrew Tridgell e5f098c37c Copter: removed some unnecessary fields in GCS.h
save some memory
2013-12-17 11:51:34 +11:00
Randy Mackay c7dc351609 Copter: remove unnecessary MPU6K filter definition
This should also help kick off the AC3.1 rebuild
2013-12-15 11:01:31 +09:00
Randy Mackay b42a34cae0 Copter: 3.1 release notes 2013-12-14 17:08:38 +09:00
Randy Mackay 2a61053634 Copter: reduce default logging for SITL 2013-12-12 22:19:12 +09:00
Andrew Tridgell 28d98414e7 Copter: fixed some build warnings 2013-12-11 10:21:20 +11:00
Andrew Tridgell 5802d7f86b Copter: added logging of 2nd compass 2013-12-10 13:35:04 +11:00
Andrew Tridgell cc3ee2ec0c Copter: added dual compass logging when available 2013-12-10 13:31:42 +11:00
Andrew Tridgell d265e54043 Copter: changes for compass healthy API 2013-12-09 17:47:22 +11:00
Andrew Tridgell f8e0f5c4f1 Copter: report both sets of sensors in MAVLink 2013-12-09 17:34:07 +11:00
Andrew Tridgell f37a2c979d Copter: don't need Log_Write_IMU2() now 2013-12-09 17:34:07 +11:00
Andrew Tridgell ffdcb715c3 Copter: updates for compass API change 2013-12-09 17:34:06 +11:00
Andrew Tridgell 0cacc7eaeb Copter: log both primary and secondary INS samples 2013-12-09 17:34:06 +11:00
Randy Mackay 145a8ed128 Copter: reduce autotune min rate D to 0.002 2013-12-09 14:17:31 +09:00
Randy Mackay 450e9e83c3 Copter: AC3.1-rc8 release notes 2013-12-09 12:02:28 +09:00
Randy Mackay eb938c6ac0 Copter: reduce autotune min rate P to 0.01 (was 0.02) 2013-12-08 11:26:49 +09:00
Randy Mackay f8165c2864 Copter: ignore yaw input during radio failsafe 2013-12-06 13:50:07 +09:00
Randy Mackay 4b3aff3f91 Copter: log flight mode to dataflash on start-up 2013-12-06 12:58:23 +09:00
Randy Mackay cf0547e854 Copter: remove AN0~AN15 pin definitions 2013-12-06 10:28:28 +09:00
Randy Mackay 58788d2934 Copter: increasd default logging for PX4, Pixhawk 2013-12-05 16:04:52 +09:00
Randy Mackay c5746e5434 Copter: update THR_MAX @Range and comments 2013-12-04 10:59:15 +09:00
Randy Mackay 2ba233942d Copter: pre arm mag offset limit to 600 for PX4 2013-12-03 23:23:26 +09:00
Ben Nizette 58735ac1aa Copter: Use AHRS heading in GLOBAL_POSITION_INT message
The definition of the heading field for GLOBAL_POSITION_INT is the
compass heading, and so it is used for Plane and Rover.  Copter
however uses the GPS course over ground in this field.

My personal beef with this is simply that the mapping display in
MAVProxy is wrong for Copter.  The question is: Do any GCS currently
rely on this field for GPS course rather than getting it from
GPS_RAW_INT as they should?
2013-12-03 20:30:02 +09:00
Randy Mackay 8fcbb7e59b Copter: OF_Loiter update control_roll and pitch 2013-12-02 11:58:59 +09:00
Randy Mackay 9d92e46198 Copter: correct optflow logging 2013-12-02 11:58:28 +09:00
Randy Mackay 0cda3c9a71 Copter: reduce SONAR_GAIN to 0.8 (was 2.0) 2013-12-01 16:25:47 +09:00
Randy Mackay ec65fd136d Copter: enable external leds 2013-11-30 22:54:13 +09:00
Randy Mackay e978a710cc Copter: remove PIEZO_PIN definition 2013-11-30 18:21:01 +09:00
Robert Lefebvre dbbe0f960a Copter: remove LED_ON/OFF defines 2013-11-30 18:20:58 +09:00
Randy Mackay 59cea4b88c Copter: remove CopterLED from main code 2013-11-30 18:20:55 +09:00
Randy Mackay 49ac1a48a5 Copter: Drift updates control_roll, pitch
control_roll, pitch should always hold desired roll and pitch angles now
that we have the RCIN dataflash message for recording pilot's input
2013-11-30 18:06:56 +09:00
Randy Mackay a3be25750f Copter: allow override of DRIFT_SPEEDGAIN 2013-11-30 15:35:59 +09:00
Randy Mackay f12f0a6abe Copter: drift file format fixes
tab replaced with four spaces
2013-11-30 15:29:26 +09:00
Randy Mackay a744658b47 Copter: combine nav_roll and control_roll
Control_roll, control_pitch now always hold the desired lean angle
whether it be from the pilot or autopilot.
2013-11-27 23:11:30 +09:00
Randy Mackay d7c636b4aa Copter: remove yaw_in from ATT dataflash msg 2013-11-27 22:59:31 +09:00
Randy Mackay f08cc010ea Copter: firmware to ArduCopter V3.2-dev 2013-11-27 22:50:12 +09:00
Randy Mackay 7ef04bb73b Copter: rename nav_yaw to control_yaw 2013-11-27 22:48:20 +09:00
Randy Mackay a8929cd746 Copter: more complete RC output reporting to GCS
Radio outputs are pulled from hal.rcout instead of from motors library
which provides more complete reporting because it includes output from
sources like the camera and mount libraries.
2013-11-27 20:31:21 +09:00
Randy Mackay 10d6a9a34e Copter: replace Log_Write_Motors with Log_Write_RCOU 2013-11-27 20:18:18 +09:00
Randy Mackay af657d58b9 Copter: RCIN dataflash logging 2013-11-27 16:46:25 +09:00
Randy Mackay 7ae3014c14 Copter: parameter @Units to Percent*10 2013-11-26 22:35:11 +09:00
Randy Mackay 14b3547830 Copter: rename some parameter Display Names
Also move some parameter descriptions to @User Advanced
2013-11-26 22:17:02 +09:00
Randy Mackay c32d77c626 Copter: fix @Group for SingleCopter 2013-11-26 21:50:29 +09:00
Andrew Tridgell 9c812d5028 Copter: added SERIAL2_BAUD and rename SERIAL3_BAUD to SERIAL1_BAUD 2013-11-26 13:05:32 +11:00
Andrew Tridgell 49062d8a37 Copter: removed extra features of copter telemetry merge 2013-11-26 13:05:32 +11:00
Andrew Tridgell a49710f20e Copter: added uartD support
this also brings GCS_Mavlink.pde closer to the plane implementation
2013-11-26 13:05:32 +11:00
Andrew Tridgell 21eac34cd1 Copter: log system ID if available 2013-11-26 13:00:03 +11:00
Randy Mackay ed9f369492 Copter: shorten g.arming_check_enabled variable
g.arming_check_enabled shortened to g.arming_check
2013-11-25 17:23:39 +09:00
Randy Mackay 1645748e43 Copter: update @Range for Rate PIDs and Sonar
This will reduce false positives in DroneShare's tlog analyser
2013-11-25 12:52:37 +09:00
Randy Mackay b8bfe008e1 Copter: run GPS glitch detection even when not armed 2013-11-22 21:46:32 +09:00
Randy Mackay 4e6d41bc8e Copter: remove unused gps_fix_count 2013-11-22 11:53:50 +09:00
Randy Mackay fe6ad3579c Copter: log GPS messages even when no fix 2013-11-22 11:51:48 +09:00
Randy Mackay 667c3ecbf8 Copter: commit to kick-off auto rebuild for -rc7 release 2013-11-22 10:34:35 +09:00
Randy Mackay 96fdc129b1 Copter: update -rc7 release notes 2013-11-22 09:55:23 +09:00
Randy Mackay 8eb46ced53 Copter: revert pre-arm check for slow GPS 2013-11-22 09:53:21 +09:00
Randy Mackay 1a0f80ee64 Copter: AC3.1-rc7 version and release notes 2013-11-21 17:30:08 +09:00
Randy Mackay 0bc505514a Copter: pre-arm check that INAV has no errors 2013-11-21 17:02:07 +09:00
Randy Mackay 965af43121 Copter: add INAV error count to PM dataflash msg 2013-11-21 17:02:04 +09:00
Randy Mackay 0219c85ee3 Copter: increase min LAND_SPEED to 30cm/s 2013-11-19 16:46:16 +09:00
Randy Mackay e6a2940718 Copter: prefix SingleCopter's MOT param description
This should allow single copter's MOT_ parameter descriptions to be more
easily recognised as belonging to SingleCopter when viewed on the wiki's
arducopter-parameters page
2013-11-19 13:38:17 +09:00
Randy Mackay b47cd6d5be Copter: fix SingleCopter motor parameters link 2013-11-19 13:25:53 +09:00
Randy Mackay 7a2f49f7da Copter: arming check for gps if GPS FS set to LAND_EVEN_STABILIZE
Setting the GPS Failsafe to LAND_EVEN_STABILIZE means the copter will
LAND if it loses GPS even if it's in a manual flight mode like
Stabilize.  With this setting it makes sense to check the GPS quality
before arming even if we're in stabilize mode.
2013-11-18 23:59:26 +09:00
Randy Mackay 24dc4391bb Copter: display pre-arm check failure reason every 30sec 2013-11-18 17:20:39 +09:00
Randy Mackay d003334b75 Copter: pre-arm check for ACRO_BAL_ROLL and PITCH 2013-11-18 16:38:05 +09:00
Randy Mackay 9ee308efd5 Copter: auto disarm in Loiter, AltHold after 15sec 2013-11-18 16:13:15 +09:00
Randy Mackay 699a5bd381 Copter: radio, batt failsafe disarm if copter is landed in Loiter or AltHold 2013-11-18 15:51:17 +09:00
Randy Mackay 7dd4ab835f Copter: CURR dataflash msg to output throttle_out
Previously it was outputting throttle-in which is not as useful in
autonomous modes
2013-11-18 13:30:48 +09:00
Randy Mackay 1359a8fea5 Copter: log INS errors in PM message 2013-11-18 12:16:21 +09:00
Randy Mackay e32e83f2f0 Copter: commit to kick off MP rebuild
Required to push back MP Beta Firmwares version to AC3.1-rc5
2013-11-17 00:56:46 +09:00
Randy Mackay cf21774cf4 Copter: update AC3.1-rc6 release notes again 2013-11-16 17:14:41 +09:00
Randy Mackay 9485363c53 TradHeli: dynamic flight speed minimum to 5m/s 2013-11-16 16:58:14 +09:00
Randy Mackay a98fb174c4 Copter: batt failsafe triggers RTL from AUTO 2013-11-16 14:55:49 +09:00
Randy Mackay fd60285121 Copter: update AC3.1-rc6 release notes 2013-11-16 14:49:03 +09:00
Randy Mackay 87127f0ab8 Copter: allow battery failsafe to trigger RTL 2013-11-16 14:46:57 +09:00
Randy Mackay a812ef4660 Copter: minor comment update for set_mode 2013-11-16 13:56:15 +09:00
Randy Mackay bc1e06757b Copter: allow GPS failsafe to trigger AltHold
FS_GPS_ENABLE parameter accepts two new options, 2=AltHold,
3=LandEvenFromStabilize.
If set to 3 the GPS failsafe will trigger and LAND even from manual
flight modes like Stabilize and ACRO.  This is useful for users who want
to ensure their copters can never stray outside the circular fence (the
fence only triggers when it knows it is outside the bounds, and it can't
know this if it has no GPS)
2013-11-16 13:55:59 +09:00
Randy Mackay 321036b72e Copter: update contributors list 2013-11-16 12:10:38 +09:00
Randy Mackay 50f583f116 Copter: AC3.1-rc6 version and release notes 2013-11-16 11:35:01 +09:00
Randy Mackay 5cc8772947 Copter: bug fix to Tricopter motor logging
Fourth motor taken from yaw channel's radio_out instead of random
location in memory
2013-11-16 10:48:02 +09:00
Randy Mackay 8c9ab50ba2 TradHeli: restore CC_COMP and PIRO_COMP 2013-11-15 22:58:43 +09:00
Randy Mackay 0f67e25d37 TradHeli: set throttle_min to zero by default 2013-11-15 22:58:38 +09:00
Randy Mackay 81fc24586e TradHeli: remove calls to get_manual_collective in auto throttle
set_collective_for_landing method makes this unnecessary
2013-11-15 22:58:36 +09:00
Randy Mackay 60bc9f4539 TradHeli: angle error to zero while motors runup
Set angle error to zero in get_roll_rate_stabilized_bf,
get_pitch_rate_stabillize_bf, get_yaw_rate_stabilized_bf.
Original commit by Rob Lefebvre
2013-11-15 22:58:34 +09:00
Randy Mackay c9c803ffd4 TradHeli: move STAB_COL_MIN to main parameter list 2013-11-15 22:58:32 +09:00
Randy Mackay 197fc67897 TradHeli: move pilot desired rotor speed to heli.pde 2013-11-15 22:58:24 +09:00
Randy Mackay 527f05ddec Copter: remove unused init_rate_controllers 2013-11-15 22:58:22 +09:00
Randy Mackay 4537e0aa15 Copter: add deadzone to ch8 for TradHeli 2013-11-15 22:58:20 +09:00
Randy Mackay 1f6bc7bd9c Copter: log TradHeli ch7, ch8 in MOT message 2013-11-15 22:58:17 +09:00
Randy Mackay 19ddb8e5f3 TradHeli: integrate constructor changes to main code 2013-11-15 22:58:15 +09:00
Robert Lefebvre bba7fdc7c3 TradHeli: ch6 tuning of ext gyro to use control_in
This could also be used to control the other Heli Ch7 functions (direct drive tail rotor control).  This should be tidied up.

Credit: Jolyon Saunders
2013-11-15 22:58:08 +09:00
Robert Lefebvre 9ae66c1773 TradHeli: add support for drive tail rotors
Repurposed external gyro and made it multi-funcitonal.
required PWM on Ch8 to start the motor in RSC Mode moved up from 100 to 400. This is to facilitate two-stage switching of the motors with PWM>100 starting the tail motor, and PWM>400 starting the main motor.
Additional amendments by Randy
2013-11-15 22:58:04 +09:00
Robert Lefebvre 232a116973 TradHeli: Use Leaky Integrator on Yaw Rate controller
Use when rotor is not running to prevent the rudder from slowly moving over
2013-11-15 22:58:02 +09:00
Randy Mackay 3ce16113b5 TradHeli: use landing collective when landed or landing 2013-11-15 22:58:00 +09:00
Randy Mackay 633e91b7d4 Copter: initialise roll, pitch, yaw modes to stabilize
This fixes a bug in which the stabilize throttle controller would be
non-tilt compensated until the user switched to another flight mode and
back again
2013-11-15 22:57:56 +09:00
Randy Mackay ae87759e6d TradHeli: add THROTTLE_MANUAL_HELI
Move check_dynamic_flight to run as scheduled task
2013-11-15 22:57:53 +09:00
Randy Mackay eaef5315bf TradHeli: bugfix to update swash in run_rate_controllers 2013-11-15 22:57:47 +09:00
Randy Mackay 34fb70cfc7 TradHeli: formatting and param description changes 2013-11-15 22:57:45 +09:00
Randy Mackay 46118b59d7 TradHeli: integrate motor lib changes 2013-11-15 22:57:43 +09:00
Randy Mackay 72597cc5bd TradHeli: remove setup via CLI
Saves 6k of flash
2013-11-15 22:57:39 +09:00
Robert Lefebvre 0e2ddb0378 Copter: verify_takeoff() should set ap.takeoff_complete to True after the takeoff is complete. 2013-11-15 22:57:34 +09:00
Robert Lefebvre c5b119288d TradHeli: Add Motor Runup check to the auto_arming check. 2013-11-15 22:57:31 +09:00
Robert Lefebvre f67d95ac75 TradHeli: Modify Throttle_Auto to prevent helis from pushing hard downward while running up the motor. We will set the collective pitch to stab_col_min which should result in a mild downward pressure if the user has set their parameters correctly. 2013-11-15 22:57:28 +09:00
Robert Lefebvre ffb605d06d TradHeli: Modify the constrain on the auto throttle controller to prevent it from commanding full down collective if we think we are on the ground still. 2013-11-15 22:57:22 +09:00