Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
4,665 Commits 71 Branches 509 Tags 814 MiB
Commit Graph

1315 Commits

Author SHA1 Message Date
Andrew Tridgell 4821eb4807 ACM: enable the new compass offset nulling in ACM 2012-03-27 15:37:24 +11:00
rmackay9 441413f1c6 ArduCopter - added PID log type. Implemented for Yaw stabilize and rate controllers. 2012-03-25 16:09:08 +09:00
rmackay9 eb55234809 ArduCopter - updated firmware version to 2.5.3 2012-03-25 09:13:51 +09:00
rmackay9 1f253c5217 ArduCopter - altitude hold - ensure throttle_avg is initialised from g.throttle_cruise parameter 2012-03-23 23:48:24 +09:00
rmackay9 19981d4864 ArduCopter - updated to firmware version to 2.5.2 to avoid confusion with post 2.5.1 versions posted to downloads area 2012-03-23 23:12:49 +09:00
Robert Lefebvre 872ec65afa Fix Auto_Trim to allow it to actually be called when setup on Ch7 pulldown menu in MP. 2012-03-23 09:17:58 -04:00
Jason Short 74893f6959 Throttle_hold was in APM_Config - which is ignored by the Mission planner Hex generator 2012-03-22 10:01:24 -07:00
rmackay9 be22deb56f ArduCopter - motors_quad.pde - corrected test sequence for + configuration 2012-03-21 22:04:50 +09:00
rmackay9 7dc18b53ad ArduCopter - navigation - corrected comment in check_missed_wp function to clarify that you've passed the waypoint when the direction to the way point is more than 100 degrees off (not 10 degrees off) from your original bearing towards the waypoint 2012-03-20 17:11:22 +09:00
rmackay9 198ac97914 ArduCopter - updated version to 2.5.1 2012-03-20 17:08:18 +09:00
rmackay9 0ba48a8556 ArduCopter - increased default THROTTLE_CRUISE to 450 2012-03-20 16:34:07 +09:00
rmackay9 ce6b1ccc75 ArduCopter - Navigation.pde - corrected comment re wp_distance and get_distance to clarify that they are in cm (not meters!) 2012-03-20 16:13:38 +09:00
Andrew Tridgell dc71191f25 MAVLink: constrain variable changes to the datatype range 
if someone tries to set a AP_Int16 to a value of 300000, they now get
32767 instead of -27678
 2012-03-19 17:29:02 +11:00
Andrew Tridgell 690ad58a64 AHRS: adapt ArduCopter for new AHRS framework 2012-03-19 17:29:02 +11:00
Jason Short 223a6f80c8 ACM: Arducopter.pde - Added a constraint to the NO_NAV mode to be similar to the Loiter and rate nav modes. 2012-03-18 22:31:22 -07:00
Jason Short 722a4d01e8 ACM: Attitude.pde - consolidated wind I term resets 2012-03-18 22:31:21 -07:00
Jason Short e42c64f94e ACM: system.pde - removed reset_nav_I() to consolidate the wind control reset. 2012-03-18 22:31:21 -07:00
rmackay9 bed667c62e ArduCopter - small change to ensure both roll and pitch commands are zero before switching out of loiter_override (loiter override becomes true when roll+pitch command is greater than 5 degrees and switches back to false when both become zero) 
- remove incorrect comments about when loiter target position is reset.
 2012-03-18 15:16:04 +09:00
rmackay9 7bf4e22c7b ArduCopter - remove reference to AUTO_RESET_LOITER that is not used anymore 2012-03-18 14:53:19 +09:00
rmackay9 485cebf85c ArduCopter - bug fix to calc_XY_velocity (was using uninitialised last_longitutde and last_latitude for speed calculations) 2012-03-18 12:11:12 +09:00
Jason Short 27f276a066 ACM: Lowered gains from flight tests today with 3DR Quad 2012-03-17 11:04:01 -07:00
Jason Short f6638d00d6 ACM: Smoother Speed calcs 2012-03-16 14:10:19 -07:00
Jason Short 09995aed62 ACM: Softer Loiter Gains 2012-03-16 14:10:19 -07:00
Jason Short 234a5dc65e ACM: Small fix to nav_throttle to prevent too fast of a landing. 2012-03-16 14:10:19 -07:00
Jason Short d52b93849e ACM: Fixed comment 2012-03-16 14:10:19 -07:00
Jason Short 1ecca36dd0 Fixed Scaling bug in Sonar mixing 2012-03-16 14:10:19 -07:00
Jason Short 0c6a87db3f ACM: Disabled D term experiment for Loiter until more testing 2012-03-15 19:20:03 -07:00
Jason Short ce14ef1b2b Tune down Loiter_P a hair 2012-03-15 19:17:27 -07:00
Robert Lefebvre 0bc40f51fb Small fix on the Traditional Helicopter Collective-Yaw compensation calculation. 2012-03-15 20:14:18 -04:00
rmackay9 eea8d67a1e ArduCopter - removed #define AUTOMATIC_DECLINATION ENABLED line to ensure users don't try and enable it because it needs a bit more work before it's ready for general use 2012-03-15 21:58:42 +09:00
analoguedevices eb530a2045 Rev'ed version number to 2.5. Added more credits 2012-03-15 02:38:54 +00:00
Jason Short 59fb1f3542 ACM: Added constraints for invalid climb rates. Robert Lefebvre had a bad sonar and very invalid rates crept into the system. 2012-03-13 21:31:16 -07:00
Jason Short 50b4c07261 Lowering the D filter for less latency and less oscillation. 2012-03-13 12:58:46 -07:00
Jason Short 72d03a8046 ACM: Loiter tuning updates, turned up I a bit, a higher I will work better if the system is well tuned. 2012-03-13 10:23:31 -07:00
Jason Short 0edc1020ac ACM: Loiter D performance updates 2012-03-13 10:23:31 -07:00
Jason Short 6edad4d9ef ACM: Larger filter for Loiter D 2012-03-13 10:23:30 -07:00
Jason Short 953b93293e ACM: removing old define 2012-03-12 13:11:30 -07:00
Jason Short 580c5e109e ACM: Got the sign wrong. I'm using the derivative of the error now and not the sensor, so the sign was reversed. 2012-03-12 13:11:05 -07:00
Jason Short 38153f15e0 ACM: Made Loiter_D 0 by default. Accidentally left it on by default. 2012-03-12 10:37:15 -07:00
Jason Short 56d2b9ef05 ACM: Broke out the D term for the PID loop to add custom filtering. The current AC_PID filtering wasn't working for this application and we needed more smoothing. Bad pitch oscillations were being transmitted to the copter. 2012-03-11 23:21:49 -07:00
Jason Short 5c3cb1c5d0 ACM: removed Filtering code for motors in Quad for testing 2012-03-11 23:21:49 -07:00
Jason Short d9ccd4f6bd ACM: made same as Loiter I 2012-03-11 23:21:49 -07:00
Jason Short e279106b44 ACM: Tuning based on flights today 2012-03-11 23:21:49 -07:00
Jason Short 38a60df189 ACM: Rate_d filter for PID loop of Loiter. 2012-03-11 23:21:49 -07:00
Jason Short 2ac29effe9 ACM: The I term in update_nav_wp with the no_nav condition was pulling from the wrong PID loop and was essentially 0 all the time. 2012-03-11 23:21:49 -07:00
rmackay9 7cf635889d ArduCopter - Log.pde - added wrap_360 to compass heading field of ATT message to resolve overflow problem that caused heading to appear as being off by 70 degrees 2012-03-12 12:09:04 +09:00
Andrew Tridgell 1e47ab26f2 AP_Declination: disable library when AUTOMATIC_DECLINATION is not ENABLED 
unfortunately this library was causing avrdude to fail to load the hex
to my APM2. Until we work out why, it's disabled.
 2012-03-11 21:46:41 +11:00
Adam M Rivera 2e1cacd67f AP_Declination: Added call to compass.set_initial_location if the compass is enabled when the 3D fix is obtained. 
Signed-off-by: Andrew Tridgell <tridge@samba.org>
 2012-03-11 20:59:47 +11:00
Adam M Rivera 566bbed7ad AP_Declination: Added new config value to allow the user to have the declination overwritten on every 3D fix. 
Signed-off-by: Andrew Tridgell <tridge@samba.org>
 2012-03-11 20:59:47 +11:00
Jason Short 8b887b77bd ACM: Added Loiter D tuning 2012-03-10 14:17:57 -08:00
Jason Short 7b2b5e858e ACM: Added Loiter_D for tuning as #23 2012-03-10 14:17:16 -08:00
Jason Short 149a484984 ACM: Firmware rev 2012-03-10 12:45:03 -08:00
Jason Short a9e7194e3d ACM: disabled auto_calibration until more testing can be done 2012-03-10 12:44:49 -08:00
Jason Short 3c1f4b1ad7 ACM: changed alt hold initialization of altitude to be immediate 2012-03-10 12:44:18 -08:00
Jason Short 68d210660e ACM: Added note about scaling rates 2012-03-10 12:43:28 -08:00
Jason Short 4b75f74d2c ACM: Altered the scaling speed for altitude changes for faster rises. 2012-03-10 12:43:01 -08:00
Jason Short 874f5aaef6 ACM: Added force_new_altitude call to do immediate changes in altitude and no gradual changes. 2012-03-10 12:42:22 -08:00
Jason Short 9f47a79a3a ACM: decreased rate P for alt hold to remove bumpy repsonse 2012-03-10 12:41:06 -08:00
Jason Short 11e5f7d40f ACM: Increased the altitude error P for smoother alt hold response 2012-03-10 12:40:44 -08:00
Jason Short 20a3cfdcde decreased the loiter rate P for overshoot 2012-03-10 12:40:07 -08:00
Jason Short bb56cea1ac ACM: increased the available rate error constrain, it was too low 2012-03-10 12:39:16 -08:00
Jason Short 285f2dd791 ACM: removed the experiment for rate error. 2012-03-10 12:38:29 -08:00
Jason Short 0ccfdc664d added Force_new_altitude call for alt hold 2012-03-10 12:37:54 -08:00
Jason Short 037221cd02 upped throttle manual boost to 225 2012-03-10 12:37:28 -08:00
rmackay9 9986776e0d ArduCopter - fixed small compile warning about unused x_iterm and y_iterm in navigation.pde 2012-03-11 01:27:58 +09:00
rmackay9 a72b20f42d ArduCopter - fix to dataflash logging of Mag heading 2012-03-11 01:27:29 +09:00
Andrew Tridgell f39d8dbde8 GCS: get_integrator() is now get_gyro_drift() in DCM 2012-03-10 10:34:33 +11:00
Andrew Tridgell 4f739ea28f make 'ENABLE' and 'ENABLED' mean the same things 
users get this wrong far too often!
 2012-03-10 10:34:33 +11:00
Andrew Tridgell a874f920d5 ACM: removed the ADC filtering code 2012-03-10 10:34:32 +11:00
Andrew Tridgell e2c525434a ACM: removed quaternion special cases in CLI code 2012-03-10 10:34:31 +11:00
Andrew Tridgell e870e7bd82 ACM: removed the DCM tuning overrides 
not needed now that DCM scales with deltat
 2012-03-10 10:34:31 +11:00
Andrew Tridgell 13bddf05b0 ACM: removed the special case for quaternions in GCS code 2012-03-10 10:34:31 +11:00
Andrew Tridgell 1547977e1b ACM: no need to fetch offsets at startup 
AP_Param handles this
 2012-03-10 10:34:31 +11:00
Andrew Tridgell 34d25ab298 ACM: removed a lot of the special case code for quaternions 2012-03-10 10:34:31 +11:00
Andrew Tridgell e780dd2b44 ACM: change DCM loop to 100Hz 
On my APM2 quad this seems to give better results
 2012-03-10 10:34:31 +11:00
Andrew Tridgell 756a91a3ee ACM: removed incorrect mode definition 2012-03-10 10:34:30 +11:00
Andrew Tridgell 04826065ef Quaternion: show "Quaternion test" on startup if enabled 2012-03-10 10:34:29 +11:00
Andrew Tridgell 1591d41b33 ACM: make it possible to build ArduCopter with quaternions 2012-03-10 10:34:29 +11:00
Andrew Tridgell bc81d8e6ac ACM: only call the fast loop if the imu has new data 
this prevents us spinning waiting for the sensors to gather some data
 2012-03-10 10:34:29 +11:00
Andrew Tridgell a54d6f744e HWSTATUS: if we don't know the voltage, report it as zero 
this will tell us if board_voltage() is really working
 2012-03-10 10:34:28 +11:00
Andrew Tridgell 9393b21a8d ACM: adjust yaw drift correction constants 
this should give the compass a bit more authority
 2012-03-10 10:34:28 +11:00
Andrew Tridgell b07a3eb966 ACM: added SIMSTATE, DCM and HWSTATUS messages to ACM 2012-03-10 10:34:27 +11:00
Jason Short 13e9608fb8 Consolidated Barometer pressure sensing to a single filter based on Randy's new filter class. 2012-03-08 23:13:04 -08:00
Jason Short df812dd78a temp remove filter for quad motors during testing. It's unlikely this filter did anything at all to be honest. 2012-03-06 22:23:06 -08:00
Jason Short 43b3e1ccd1 ACM - 
Implemented automatic ranging of Alt Hold gains. Works well in simulator and testing.
- alt hold estimation moved to 50 hz
- simple fixed observer calc for smooth and accurate climb rates useful for derivative calcs
- auto-reset of the I term by moving I value into throttle value. This recalcs the gain every 20seconds for battery drainage compensation in long flights.
- remove filtering for Nav_throttle
- added a way to lower the gain on nav_throttle for descents by / climb_rate error by 2 - seems to work OK and keeps copter from dropping like a rock when the Baro drifts quickly lower.
- removed old throttle hold set point code
- made throttle override for alt hold +- 200 vs 250
 2012-03-06 22:22:14 -08:00
Jason Short 5117ddff26 ACM: Updated config values 2012-03-06 22:12:24 -08:00
rmackay9 8717d7dd7c ArduCopter - fix for stability patch and motor filter meant to deal with engines tendency to speed up faster than they slow down 2012-03-06 23:20:30 +09:00
rmackay9 8af43c4a19 ArduCopter - fixed typo in motor filtering for octa, octa_quad and y6 that is suppose to correct for props speeding up faster than they slow down. 2012-03-06 22:19:19 +09:00
rmackay9 29aea35eae ArduCopter - added OCTA_QUAD_FRAME to comments in APM_Configh.h to help user select frame when compiling with arduino 2012-03-06 22:15:02 +09:00
Jason Short fe5612d38b Added define for throttle range for altitude changes, updated it to 250 2012-03-05 22:12:53 -08:00
Robert Lefebvre a7e0fc7774 Added support for TradHeli H1 swashplate type. Added new param heli_h1_swash_enabled. 
Signed-off-by: Robert Lefebvre <robert.lefebvre@gmail.com>
 2012-03-03 08:14:14 -05:00
Andrew Tridgell 3745dfd59f ACM: use g.rc_speed for all APM_RC.SetFastOutputChannels calls 2012-03-02 17:57:08 +11:00
Andrew Tridgell 91c3f993b4 ACM: set default RC fast speed to 400Hz 2012-03-02 17:57:08 +11:00
Andrew Tridgell bfca928211 ACM: added RC_SPEED MAVLink parameter 
this will set the speed for APM_RC.SetFastOutputChannels()
 2012-03-02 17:57:08 +11:00
Andrew Tridgell 1e2b57410c ACM: fixed Parameters.h to avoid duplicate keys 
unfortunately everyone needs to reload
 2012-03-02 15:48:28 +11:00
Andrew Tridgell fcb1b9ba95 ACM: added board_voltage() 2012-03-02 15:48:28 +11:00
Robert Lefebvre c84d864cd6 Rescale TradHeli roll_out and pitch_out into the min and max ranges to provide linear motion across the input range instead of stopping when the input hits the constrain value. These calculations are based on an assumption of the user specified roll_max and pitch_max coming into this equation at 4500 or less, and based on the original assumption of the total g.heli_servo_x.servo_out range being -4500 to 4500. 
Signed-off-by: Robert Lefebvre <robert.lefebvre@gmail.com>
 2012-03-01 22:04:50 -05:00
Jason Short 4e2a54566b added stab_d gain scheduling - off by default 2012-02-28 20:16:40 -08:00
Jason Short 27f6afd178 added stab_d gain scheduling 2012-02-28 20:16:40 -08:00
Jason Short a096292edb added stab_d gain scheduling 2012-02-28 20:16:40 -08:00
Jason Short 6ca8aeecf3 added stab_d gain scheduling 2012-02-28 20:16:40 -08:00
Jason Short 4b1d847a3a added option for stab_d gain scheduling 2012-02-28 20:16:40 -08:00
Jason Short 4ef4a19f8e Added test for stab_d gain scheduling. 2012-02-28 20:16:40 -08:00
Pat Hickey ccb8c31966 Cleanup: rm ArduCopter/GCS_Mavlink\ copy.txt 
* Not needed, but we can always checkout an old version if it is.

Hi Pat,
This may have been my WIP for the Mavlink 1.0 conversion. I tried to
give Tridge a head start on it. I've made small updates to it in
parallel to the current Mavlink. You can delete it as he would have used
it by now if he felt it was helpful.

Jason

On Feb 28, 2012, at 4:08 PM, Pat Hickey wrote:

It looks like this file was checked in by accident, possibly, but you've
made a few small changes to it since creating it.

Is it important? Should we get rid of it?

Git log of file below.

Thanks
Pat
...
 2012-02-28 16:28:27 -08:00
Pat Hickey 00180e7084 Cleanup: rename files with spaces in their names, replace with underscores 
* Skipped /Tools/ArdupilotMegaPlanner/Resources/new...
  and /archive/Configurator/Source/Utilities/TDMS/G...
  because I don't want to mess with that.
 2012-02-28 16:14:31 -08:00
Robert Lefebvre b7ccfb0114 Added heli_collectiveFactor array 
Signed-off-by: Robert Lefebvre <robert.lefebvre@gmail.com>
 2012-02-28 10:49:28 -05:00
rmackay9 8da8ce5b58 ArduCopter - made rate controller filters globals to fix compiler error on Arduino 022 (Arduino 1.0 was fine) 2012-02-28 22:56:26 +09:00
rmackay9 082cc70f1c ArduCopter - Attitude.pde - updated get_rate_roll and get_rate_pitch to use new average filter. 
modified all int to int16_t in Attitude.pde
 2012-02-28 21:26:37 +09:00
rmackay9 701a21ff2f ArduCopter - modified to work with new Filter library 2012-02-28 21:02:44 +09:00
Jason Short f8e9fa8b61 Set loiter rate enabled by default 2012-02-26 12:29:28 -08:00
Jason Short bab1faf644 Added OPtion for non-rate based loiter 2012-02-26 11:33:37 -08:00
Jason Short 9a2be4701f removed Constraint that caused JLN's horizontal drift. 2012-02-26 11:33:37 -08:00
Jason Short 3ce1633157 Added Loiter Rate Tuning 2012-02-26 11:33:37 -08:00
Jason Short 1b7a038043 Added Loiter_rate_tuning 2012-02-26 11:33:36 -08:00
Jason Short 00d5ad9343 Added more Logging for PIDs. 2012-02-26 11:33:36 -08:00
rmackay9 41ea8e3eff ArduCopter - added #include <Filter.h> to unbreak the build! 2012-02-26 17:05:41 +09:00
rmackay9 add3133100 ArduCopter - change sonar to use new mode filter from Filter library 2012-02-26 15:35:14 +09:00
Jason Short e4e8189448 added a simple rest of nav_throttle just in case 2012-02-25 13:31:21 -08:00
Jason Short cd55498a5c increased speed of alt hold I term based on Jani's Logs 2012-02-25 13:31:21 -08:00
Jason Short a3f65b4a23 increased the rate error for more responsive alt hold 2012-02-25 13:31:21 -08:00
Jason Short 68739f3cc4 Based on Jani's latest logs I've made two tweaks to alt hold. 
The first is to remove the filter on the throttle output for alt_hold.

The second was to open up the constraint on climb rate. This is to deal with larger than expected disturbances causing altitude changes.
 2012-02-25 13:31:21 -08:00
Andrew Tridgell 6b265c5034 ACM: use a NULL gps pointer in DCM init 
current DCM API does need a GPS reference passed in, but it can be
NULL
 2012-02-25 15:08:49 +11:00
Andrew Tridgell 3fe5b3151b allow MAG_ENABLE to be changed in flight 
this disables the compass in DCM if MAG_ENABLE is changed in
flight. Without this we would use a fixed yaw once the compass is
disabled

This also makes sure we don't pass the compass to DCM till we have
done a read. This ensures we have a good compass fix for the initial
DCM heading
 2012-02-25 14:51:09 +11:00
Andrew Tridgell d1f655beee ACM: check the return of compass.init() 
if the compass fails to initialise then don't pass it to DCM, or we
will get no yaw control. Report the init failure to the user.
 2012-02-25 14:51:08 +11:00
Andrew Tridgell ce5c7c2c85 ACM: don't pass a gps pointer to DCM 
after discussion with Randy, we don't want ArduCopter to fall back to
GPS for yaw when the compass becomes unhealthy. So we shouldn't pass
the gps object to the DCM code at all.
 2012-02-25 14:51:08 +11:00
Andrew Tridgell 17718720b1 GCS: force scalar type in copy_name() 
this enables access to compass offsets over MAVLink
 2012-02-25 11:37:20 +11:00
Andrew Tridgell 007a6b8958 AP_Param: added special handling for Vector3f 
We would like to be able to use Vector3f as a parameter while exposing
the individual elements of the vector as MAVLink parameters. This
change to AP_Param makes that possible, by giving AP_Vector3f a dual
personality
 2012-02-25 11:37:20 +11:00
Jason Short ab945f36df Compass heading added to ATT log 2012-02-24 12:11:15 -08:00
rmackay9 ab0e1d7632 TradHeli - increase max yaw input to 45 degrees 2012-02-24 20:18:40 +09:00
Jason Short ed5db98522 updated Gains for Marco's loiter test 2012-02-23 22:03:26 -08:00
Jason Short 22982cda0f Loiter updates 2012-02-23 22:03:26 -08:00
Andrew Tridgell 4edf311865 ACM: ensure update_trig() doesn't cause NAN values for cos_roll/cos_pitch 
the DCM matrix could have a value over 1.0 for c.x due to rounding
errors
 2012-02-24 11:52:55 +11:00
Jason Short b1340bbf80 added a constraint to D term 2012-02-23 09:14:44 -08:00
Andrew Tridgell b231112957 DCM: renorm_sqrt_count is now called renorm_range_count 2012-02-23 08:16:08 +11:00
Jason Short 128f19cdf7 Emile's Fixes 2012-02-22 10:27:34 -08:00
Jason Short ac5a4830a1 Marco's Hexa Motors 2012-02-22 09:55:44 -08:00
Jason Short 92cfc8913a revved a version 2012-02-22 09:00:42 -08:00
Jason Short 207ffee856 made timer unsigned 2012-02-21 21:49:03 -08:00
Jason Short ac81ddef04 commented out control mode debug print 2012-02-21 21:48:07 -08:00
Jason Short 7bfda28cdc removed old comments 2012-02-19 14:21:27 -08:00
Jason Short 70d7a1f5d0 Added slow_wp default in AP mode 2012-02-19 13:15:40 -08:00
Jason Short 434b059586 reset slow_WP option at mode switch 2012-02-19 13:13:42 -08:00
Jason Short 151e710668 Added slow wp option in calc_desired_speed 2012-02-19 13:13:21 -08:00
Jason Short 4b52dde882 set Slow WP option for RTL in Auto mode 2012-02-19 13:12:23 -08:00
Jason Short 79a9665c9d Added "slow WP" option for RTL. 2012-02-19 13:11:59 -08:00
Jason Short ba2cfee2fb Updated manual throttle control during throttle hold 2012-02-19 12:40:51 -08:00
Jason Short a4b8119c24 added workaround for resetting alt. 2012-02-19 12:40:08 -08:00
Jason Short 2a5a7fa245 Added SW test for Manual Boost 2012-02-19 12:39:40 -08:00
Randy Mackay b4ee111c49 TradHeli - change throttle range back to 0~1000 (was temporarily changed to be 1250~850 which limited the range of the swash plate's vertical movements) 2012-02-20 00:27:12 +09:00
Randy Mackay 7c4ef140b9 ArduCopter - remove unnecessary block for next GPS value before saving home location 2012-02-19 15:38:40 +09:00
Andrew Tridgell 1fc24b506e AP_Param: update users of AP_Param for ParamToken 2012-02-19 17:05:28 +11:00
Andrew Tridgell b06f35eaa2 Heli: fixed some 'used before initialised' warnings 2012-02-19 16:34:43 +11:00
Jason Short f86e1ed63f Axis lock beta (off by default) 2012-02-18 21:16:19 -08:00
Jason Short aeed144180 updated max throttle define 2012-02-18 21:14:13 -08:00
Jason Short 5d658e5743 Change 800 to a define 2012-02-18 21:13:28 -08:00
Jason Short 83ad721b73 added Axis_Lock params 2012-02-18 21:13:06 -08:00
Jason Short 0517ed5199 updated throttle range 2012-02-18 21:11:06 -08:00
Jason Short 669e8e34ea added a limit to range output 2012-02-18 21:08:17 -08:00
Jason Short aa57fce9f4 some better defaults for JDrones 2012-02-18 14:23:21 -08:00
Randy Mackay e3c24fbce8 ArduCopter - fix for yaw control on Octa Quad Plus frame. 2012-02-18 22:04:09 +09:00
Randy Mackay b55db247ca TradHeli - fixed small parameter bug affecting helis. The servo parameters were declared as GSCALAR instead of GGROUP in Parameters.pde. 
also renamed heli parameters from _coll_ to the more descriptive _collective_
 2012-02-18 20:57:51 +09:00
Randy Mackay cd89258294 ArduCopter - updated version to 2.4 2012-02-18 18:44:29 +09:00
Andrew Tridgell db4fef174b ACM: expanded EEPROM parameter area by 256 bytes 2012-02-18 10:51:57 +11:00
Andrew Tridgell 6b357fc66b AP_Param: fixed saving of sensor calibration 
this fixes the saving of the accel and gyro calibration to EEPROM,
which was initially broken by the AP_Param conversion
 2012-02-18 10:51:57 +11:00
Jason Short 677df0fe1c added Rate_D tuning value 2012-02-17 15:23:59 -08:00
Jason Short 0d5f7ca072 upped rate loop to 250hz 2012-02-17 15:23:59 -08:00
Jason Short 03aa28224b re-implemented WII Dampening filter for Marco. 2012-02-16 22:38:23 -08:00
Jason Short 9c7b8586d5 Adjusted gains to move closer to Marco's tests 2012-02-16 22:19:39 -08:00
Jason Short 75919436ac added extra gain logging 2012-02-16 22:09:22 -08:00
Jason Short cbe297b634 scaled X velocity 2012-02-16 22:09:22 -08:00
Jason Short 6732f0934a cast to float 2012-02-16 22:09:21 -08:00
Jason Short 6913400221 cast D term to float just in case 2012-02-16 22:09:21 -08:00
Jason Short 43e695b1ac removed some unused vars, 
formatting, made loop speed same as PIDT1 to eliminate variable.
 2012-02-16 22:09:21 -08:00
Jason Short b070225366 CH 6 Range setup 2012-02-15 11:47:54 -08:00
Jason Short bb4c02fbff Added acro_p to the params 2012-02-15 11:29:25 -08:00
Jason Short f2b6b86265 allow auto-land if failsafe is triggered 2012-02-15 10:53:54 -08:00
Jason Short efb451e475 Marco's updated Motor testing code 2012-02-15 10:49:35 -08:00
Jason Short f9296796fd Added lengthy note about motor testing 2012-02-15 10:49:11 -08:00
Jason Short 0b011e3cd3 added option in code for Loiter specific gains 2012-02-15 09:10:15 -08:00
Jason Short 101979ed7b AP slew rate 2012-02-15 09:10:15 -08:00
Jason Short f20952df49 new defaults for params 2012-02-15 09:10:15 -08:00
Jason Short 11d1973abd Added Acro_P 2012-02-15 09:10:14 -08:00
Jason Short 67892cd8df synced params 2012-02-15 09:10:14 -08:00
Jason Short c916a87a78 added RTL_land_enabled 
added auto_pilot slew rate
 2012-02-15 09:10:14 -08:00
Jason Short eee43608de Added new params for CH6 Tuning 
moved enums to give more room for additional PIDs for Loiter
added new Acro_P gain
added auto_land_enabled option
added pi_loiter_lon and pi_loiter_lat for separate tuning of loiter
 2012-02-15 09:10:14 -08:00
Jason Short 4ecbb19dcd Added range setting via a parameter for CH6 tuning 2012-02-15 09:10:14 -08:00
Jason Short ff627a8986 removed unused Vars 2012-02-13 15:25:23 -08:00
Jason Short a69dc32020 Lowered for Jani 2012-02-13 15:25:23 -08:00
Andrew Tridgell 153575a01c token is 16 bits now 2012-02-13 16:22:53 +11:00
Andrew Tridgell 16a5b5c3ee added AP_Param::show_all() 
this moves the logic into common code
 2012-02-13 16:22:52 +11:00
Andrew Tridgell 781617cae0 token size for first()/next() is now 16 bits 2012-02-13 16:22:52 +11:00
Andrew Tridgell 50f9d12ad5 go back to 1024 bytes for variables in EEPROM 2012-02-13 16:22:52 +11:00
Andrew Tridgell f5f6e2d4ec added group indexes to GCS_MAVLINK class 2012-02-13 16:22:52 +11:00
Andrew Tridgell d2a4091716 fixed apm2beta build with AP_Param 2012-02-13 16:22:52 +11:00
Andrew Tridgell 1bf832de2d the ACM parameters have a max size of 1114 bytes 
to ensure that all parameters can be saved, expand parameter area by
256 bytes
 2012-02-13 16:22:52 +11:00
Andrew Tridgell 1af6f08b1c adapted main ACM code for AP_Param 2012-02-13 16:22:52 +11:00
Andrew Tridgell da1526ced2 update ACM MAVLink code for AP_Param 2012-02-13 16:22:52 +11:00
Andrew Tridgell f363d0542c fixed warning in Log build 2012-02-13 16:22:52 +11:00
Andrew Tridgell 55d0ad3255 update main parameter code for AP_Param in ACM 2012-02-13 16:22:52 +11:00
Andrew Tridgell 2133b9fb08 log: fixed some integer size errors 
need to be careful with the types passed to printf()
 2012-02-12 20:38:37 +11:00
Pat Hickey abd85f99a7 Makefile: extra convenience target for apm2hexa 2012-02-11 16:05:51 -08:00
Pat Hickey 0ad15e4fff ArduCopter Hexa output_motor_test: individually select all 6 motors 
* each of the 6 hexacopter motors can be selected individually
  by moving the joystick to extremes.

* previously, this was built from the quadcopter output_motor_test
  and some motors (left/right motors on +, front/back motors on X)
  were only selectable as pairs.
 2012-02-11 16:05:51 -08:00
Pat Hickey 81ce8d346e ArduCopter setup motors: print basic instructions. 2012-02-11 16:05:51 -08:00
Pat Hickey 2022c1bab0 ArduCopter APM_Config.h: add sample custom channel config 
* uses new config variables introduced in 8a19543fd1e09621ba
 2012-02-11 16:05:51 -08:00
Pat Hickey db4195b7a0 ArduCopter Channel Config: config vars for user override of MOT_n mapping 
* config variable CONFIG_CHANNELS has possible values
  CHANNEL_CONFIG_DEFAULT or CHANNEL_CONFIG_CUSTOM
* config_channels.h only provides APM1/APM2 mapping when
  CONFIG_CHANNELS == CHANNEL_CONFIG_DEFAULT
 2012-02-11 16:05:51 -08:00
Jason Short 0315221bd1 Cosmetic tweaks for tuning 2012-02-11 15:29:11 -08:00
Jason Short f369a02aab Gain adjustments for 3d frame. 2012-02-11 15:29:11 -08:00
Jason Short c39cafc3c5 reset All for Auto takeoff 2012-02-10 22:54:29 -08:00
Jason Short 7c45d2bdc3 reset Rate_I for takeoff 2012-02-10 22:50:56 -08:00
Jason Short 8cc480f7e6 upped max target speed to center of loiter 2012-02-10 22:46:27 -08:00
Jason Short 1851dd541b Made Yaw Hold universal for Acro 2012-02-10 22:32:55 -08:00
Jason Short 32e7b075d9 Moved to Rate_I by default for Jani to test 2012-02-10 22:32:55 -08:00
Jason Short 4f44ccc182 get_acro_yaw added 2012-02-10 22:32:55 -08:00
Jason Short 927fc25421 made Yaw work like Roll and Pitch 2012-02-10 22:32:55 -08:00
Jason Short 480be14eb0 Minimize the Yaw Deadzone 2012-02-10 22:32:55 -08:00
Jason Short b29384581a Up Nav_Rate_P 2012-02-09 22:38:36 -08:00
Jason Short 7cb4711e8e reverted to Save_WP now that CH7 triggering is fixed 2012-02-09 22:33:01 -08:00
Jason Short 8a1c2165b2 Fix for disabled CH7 value triggering WP saving 2012-02-09 22:32:04 -08:00
Jason Short a27bd9db46 2.3.1v 2012-02-09 22:22:01 -08:00
Jason Short fb003e9742 Enabled PWM test 2012-02-09 22:22:01 -08:00
Jason Short e5a0959394 Found missing Break in Switch statement. 2012-02-09 22:22:01 -08:00
Jason Short 471bd12799 faster FS timer 2012-02-09 22:22:00 -08:00
Jason Short 0f3c3bb563 Loiter update - removed compensation curve. Did some more math and its's not worth the effort, harder to tune. 2012-02-09 22:22:00 -08:00
Jason Short d00d6b8c64 Added safety to prevent shutdown of motors during Auto-land 2012-02-09 22:22:00 -08:00
Jason Short f3547a04a5 Acro fix - we had lost the scaling of Acro mode in 2.1. This restores that. 2012-02-09 22:22:00 -08:00
Randy Mackay 7745239c13 ArduCopter - CH7 - changed default to CH7_DO_NOTHING 2012-02-09 20:26:01 +09:00
levinemax 0d3369af45 Motor mix update for X8 (octo quad), 
diagrams:
http://wiki.ardupilot-mega.googlecode.com/git/images/APM1/ACM-X8_APM14.jpg
http://wiki.ardupilot-mega.googlecode.com/git/images/APM2/FRAMES_X8.jpg
 2012-02-09 03:57:40 +00:00
Randy Mackay 31ff9a9318 ArduCopter - Camera.pde - turn off camera pitch control (which uses channel 6) when channel 6 is being used for tuning. 2012-02-08 23:51:53 +09:00
Randy Mackay e9ef79c42d Arducopter - reduced rate of decent when landing using sonar 2012-02-08 22:46:32 +09:00
Randy Mackay 54fe857236 ArduCopter - Log.pde - fixed Log_Read_Control_Tuning so that it doesn't read too many bytes. Also fixed up some comments 2012-02-05 16:56:51 +09:00
Randy Mackay bde1ebb56e TradHeli - tiny fix for yaw_offset. Yaw_offset is used to proactively counteract rotational force caused by changing the collective pitch (i.e. rapidly climbing or decending). There was a small bug for when the collective pitch is negative (i.e. powered decent) in which case the offset was in the incorrect direction. 2012-02-05 11:04:38 +09:00
Andrew Tridgell c95a295fd6 allow for lower serial baud rates 
not many people will use less than 9600 baud, except for those wanting
to test extreme range radios, which is what I'm trying to do :-)
 2012-02-04 19:07:18 +11:00
Jason Short d161c0451f fix issue with low throttle in air 2012-02-03 13:29:59 +00:00
Michael Oborne 484b688700 fix issue 502 
to identify quad over mavlink
 2012-02-03 06:53:08 +08:00
Pat Hickey b65eb110bd Revert all changes to ArduCopter Motors MOT mappings. 
Revert "Arducopter Motors Octa: Change V frame MOT_ output ordering."

This reverts commit bdab02f408ddc5451fcb4c6390b2475d31ac657f.

Revert "hexa frame FRAME_CONFIG fixup"

This reverts commit d15e692df613cb728ec671a54dce166f6f1940a0.

Revert "Arducopter Motors Octa: revert OCTA_V_FRAME back to part of OCTA_FRAME"

This reverts commit cb0a8c62fbd07a8ae9dcb8d4fffce337ace1aa1c.

Revert "Arducopter Motors Hexa: Change ordering of MOT designations in Plus frame"

This reverts commit 120d7f9050d5ec9f8fbe02c0ed4f38621949f4ee.

Revert "Arducopter Motors Hexa: Revert HEXA_PLUS_ and HEXA_X_ to single HEXA_FRAME"

This reverts commit 7d65ec311fd2e1222a36d0b34c366e21f3869fcc.

Revert "Arducopter Frames: revert to old HEXA_FRAME and OCTA_FRAME defines."

This reverts commit 47c6e8662f4d5e8fb920f2049338541343d8d18e.

Revert "Add Max's changes for new MOT mappings. Defines new FRAME_CONFIG types."

This reverts commit 8259c90ec7cb29dedac19890cd9a4449b7399e36.
 2012-02-01 10:14:46 -08:00
analoguedevices 256893f385 credits 2012-02-01 04:44:36 +00:00
analoguedevices d86dbd1c6f Incremented version number to 2.3 2012-02-01 04:39:15 +00:00
Pat Hickey 48b152d642 ArduCopter Octa: fix yaw motors for Octa V. 
* I based this off the APM1 Octa V diagram at
  http://code.google.com/p/arducopter/wiki/AC2_Multi
 2012-01-31 19:37:49 -08:00
Pat Hickey ca18eb3f8f Arducopter Motors Octa: Change V frame MOT_ output ordering. 
* I backed this out from Max's changes, but I'm not sure whether its correct.
 2012-01-31 18:19:41 -08:00
Pat Hickey 417d75eb50 hexa frame FRAME_CONFIG fixup 2012-01-31 18:19:41 -08:00
Pat Hickey 41ea9079be Arducopter Motors Octa: revert OCTA_V_FRAME back to part of OCTA_FRAME 2012-01-31 18:19:41 -08:00
Pat Hickey 7d264d1150 Arducopter Motors Hexa: Change ordering of MOT designations in Plus frame 
* This will change the output order for APM2, but not APM1.
 2012-01-31 18:18:13 -08:00
Pat Hickey 5cee2b674b Arducopter Motors Hexa: Revert HEXA_PLUS_ and HEXA_X_ to single HEXA_FRAME 2012-01-31 18:18:13 -08:00
Pat Hickey 8463acc978 Arducopter Frames: revert to old HEXA_FRAME and OCTA_FRAME defines. 
* HEXA_X_FRAME and HEXA_PLUS_FRAME merged back into HEXA_FRAME
* OCTA_V_FRAME merged back into OCTA_FRAME
 2012-01-31 18:18:13 -08:00
Pat Hickey f32d089f33 Add Max's changes for new MOT mappings. Defines new FRAME_CONFIG types. 
* HEXA_FRAME has been eliminated and changed to HEXA_X_FRAME and
  HEXA_PLUS_FRAME
* OCTA_FRAME stays the same name for X and +, but the V frame
  configuration requires new OCTA_V_FRAME name.
 2012-01-31 18:18:13 -08:00
Randy Mackay 1a1f6cac5d OptFlow - reenable OF_LOITER pid controller and reduce I term 2012-02-01 08:04:18 +09:00
Jason Short 4402a92e85 Loiter PIDs 2012-01-30 21:13:03 -08:00
Jason Short 5de459a160 tweaks to Loiter 2012-01-30 21:13:03 -08:00
Jason Short 06d54bf0e8 ATT tuning update 2012-01-30 21:13:03 -08:00
Jason Short c181186690 tuning 2012-01-30 21:13:03 -08:00
Jason Short 90ee552bd1 cosmetic 2012-01-30 21:13:03 -08:00
Jason Short 3050c1d765 tuning fixes 2012-01-30 21:13:03 -08:00
Jason Short f2afa39bbd Cosmetic 2012-01-30 21:13:03 -08:00
Jani Hirvinen b3dd07038b Minor changes for PID for jDrones motors due latest changes on control laws. 2012-01-31 09:00:31 +07:00
Jason Short ba81e2aa69 pid_nav_lat incorrectly labeled 2012-01-29 23:02:00 -08:00
Jason Short cc45bd47fe cosmetic 2012-01-29 21:55:17 -08:00
Jason Short d93e259289 Added more attributions 2012-01-29 21:53:44 -08:00
Jason Short 25c2c9b437 removed filter. Don't need it. 2012-01-29 17:10:52 -08:00
Jason Short c855c81d2a limiting alt hold rate error to 1m/s 2012-01-29 17:08:34 -08:00
Jason Short 370d633f51 Lowering the throttle_P values by default 2012-01-29 16:27:13 -08:00
Jason Short af0b0d5a7f made Loiter over ride exit dependent not on speed, but centered sticks. 2012-01-29 16:15:02 -08:00
Randy Mackay cff6799d18 TradHeli - fix to servo limits. They had been unnecessarily limited to the collective pitch's min and max but actually there are cases (for example when the swash is leaning over 45degrees) where one servo goes well beyond the collective pitch's min or max. 2012-01-29 21:14:37 +09:00
Randy Mackay 1cbbe7bc7d Optflow - minor fix to D term defaulting 2012-01-29 21:06:41 +09:00
Jason Short 2a8044c666 Landing update for better baro landing 2012-01-28 22:35:57 -08:00
Jason Short 9dd1730cce reduce test.pde size for 1280 users 2012-01-28 22:16:24 -08:00
Jason Short 0213f4dd88 2.2B6 - Please verify Heli still functions properly. 
Added AC_PID lib
Updated landing code
bug fixes
 2012-01-28 22:00:05 -08:00
Jason Short e94ac68e4d formatting 2012-01-28 21:19:46 -08:00
Jason Short 8fcb2931d7 Cosmetic changes 
GPS LED lock waits for home_is_set to be true
 2012-01-28 21:19:46 -08:00
Jason Short a685510c38 changed tuning range 2012-01-28 21:18:43 -08:00
Randy Mackay 000acac9f8 Arducopter - Tri - move yaw servo (channel7/motor7/CH_TRI_YAW) to mid point on startup 2012-01-28 10:13:58 +09:00
Randy Mackay 2db4d2bfe6 OpticalFlow - added OF_LOITER flightmode 2012-01-28 09:27:16 +09:00
Pat Hickey 38d83d6cf0 ArduCopter Tri: fix for enable_out of yaw servo, defined yaw servo for APM2 2012-01-27 07:39:01 -08:00
Randy Mackay f27b41179b Sonar - changed default pin to A0 2012-01-26 22:50:48 +09:00
Pat Hickey 70825e0e1c ArduCopter Heli: add motors_output_enable function 2012-01-25 22:41:09 -08:00
Randy Mackay 2f84b54bbb OpticalFlow - replaced PI controller with PID controller. 
Modified optical flow hold to use aggregated position instead of speed.
 2012-01-25 21:55:14 +09:00
Randy Mackay cd21c5905b Optical flow - updated standard frame rate to 2000hz and increased resolution to 1600cpi 2012-01-25 21:53:20 +09:00
Jason Short 86c7742dc0 added loiter_d to allow users to configure alternate Loiter alg 2012-01-22 14:19:27 -08:00
Jason Short 32241319c1 Revert "test to switch loiter controls" 
This reverts commit 92270371d038f246d535f0ace9fc19272c44291d.
 2012-01-22 14:19:27 -08:00
Jason Short 04a2eee410 test to switch loiter controls 2012-01-22 12:28:34 -08:00
Pat Hickey 05246bf3b4 ArduCopter: Call APM_RC.enable_out for camera channels in init_camera() 2012-01-22 12:03:11 -08:00
Pat Hickey 368e736a61 ArduCopter: Call motors_output_enable at correct spot during init 2012-01-22 12:03:11 -08:00
Pat Hickey 2bd2e9c774 ArduCopter: Add implementation of motors_output_enable to each motors_ frame type 2012-01-22 12:03:11 -08:00
Jason Short acf43341da Causes Aero_SIM to fail 2012-01-22 09:34:43 -08:00
Jason Short 8c4b955282 added Beta 4 tag 2012-01-21 22:15:23 -08:00
Jason Short a213e05eb9 converted to cm 
Signed-off-by: Jason Short <jasonshort@mac.com>
 2012-01-21 22:14:08 -08:00
Jason Short 7616c3b5a1 Converted distance gains to CM 
added loiter_d for rate control, equal to old Nav_P gain
 2012-01-21 22:13:57 -08:00
Jason Short e1f7fa34ea Fixed speed governor which was letting speed get to 0. 
added Loiter_d to replace Nav_P for rate control
wp_distance calc now returns CM
 2012-01-21 22:12:57 -08:00
Jason Short 8bd6cabdf1 recording nav_bearing rather than target bearing 
recording x and y speed rather than Iterms for nav since they are always 0 now
 2012-01-21 22:10:28 -08:00
Jason Short 14a8d8a471 added conversions of CM to M 2012-01-21 22:09:39 -08:00
Jason Short a3daae1530 Added Loiter_D to replace Nav_P for better separation of loiter and navigation tuning. 
Upped Nav_P defaults to 3 based on windy flight testing
Added minimum WP speed define of 1m/s
Upped loiter_I for better wind performance - was not seeing any overshoot in logs
Made Nav_I default of 0, since we are not using it in the code.
 2012-01-21 22:09:13 -08:00
Jason Short 9ecd091f79 convert command into CM from M 
Making Landing boost be one at minimum to trigger better navthrottle output
 2012-01-21 22:06:35 -08:00
Jason Short 6377cf8549 better default for speed governer 2012-01-21 22:05:48 -08:00
Jason Short 02d6adb21f slightly less filtering for less latency 2012-01-21 22:04:54 -08:00
Jason Short 275815a7c9 Converted to cm for distance 2012-01-21 22:04:35 -08:00
Jason Short ab8bf0b560 increasing the velocity near WP 2012-01-21 11:59:49 -08:00
Jason Short 8f86caa3ff limiting the pitch throttle compensation 2012-01-21 11:59:49 -08:00
Jason Short fa06d4a2e3 Calc error for logs 2012-01-21 11:59:49 -08:00
Jason Short d444051eb3 Enabled auto throttle hold 2012-01-20 22:52:31 -08:00
Jason Short e9a4253cd1 added note 2012-01-20 22:52:31 -08:00
Jason Short 3921fb7880 formatting 2012-01-20 22:52:31 -08:00
Jason Short 2fa8a343ac Added cast for comparison 2012-01-20 22:52:30 -08:00
Jason Short 525f7cd40f cleanup 2012-01-20 22:52:30 -08:00
Jason Short a087d84734 error on comparison operator 2012-01-20 22:52:30 -08:00
Jason Short 84937b4f69 Added Auto_land_timeout to params 2012-01-20 22:52:30 -08:00
Jason Short bf8774c2f8 AutoLanding timeout for Mission Planner 2012-01-20 22:52:30 -08:00
Jason Short c5dd970026 Max throttle output was to high 2012-01-20 22:52:30 -08:00
Jason Short 99b71434da Updated Firmware version 2012-01-20 22:52:30 -08:00
Jason Short 9c912b2573 reset all I terms at Arming 2012-01-20 22:52:30 -08:00
Jason Short 63a1cf75df enabled Mavlink Land command 2012-01-20 22:52:30 -08:00
Jason Short 0475dbf8ae relocated reset_I term functions to central location 2012-01-20 22:52:30 -08:00
Jason Short f504c79fb0 Stab_D changes units with the new dampening controller updates 
Stabilize roll is raised to .1 - Flies great, and avoids a slow oscillation that could be affecting loiter.
Loiter P lowered to 1.5 based on feedback
 2012-01-20 22:52:30 -08:00
Jason Short 3a4a80c650 renamed function 2012-01-20 22:52:30 -08:00
Jason Short c2496948fb Verify land updates from JLN 
Effectively a throttle control for landing that mimics a person lowering the throttle.
 2012-01-20 22:52:29 -08:00
Jason Short d991a22453 Refined the D term for stabilize 
moved all the rest_I terms from code into 1 central place
 2012-01-20 22:52:29 -08:00
Jason Short ba535ed956 B3 2012-01-20 22:52:29 -08:00
Jason Short 556d646cad set dampening range from 0 - .08 from 0 to .6. The new dampening code has changed units. 
added the ability to force nav_throttle so we  don't get ground effects screwing up baro sensor.
Added more descriptive Rest_I functions
 2012-01-20 22:52:29 -08:00
Jason Short 0f24860552 Altitude no longer resets when moving loiter WP 2012-01-20 22:52:29 -08:00
Jason Short 7468889bb7 slowed down slightly 2012-01-20 22:52:29 -08:00
Jason Short aa1f09af83 Lowered range to more sensible values 2012-01-20 22:52:29 -08:00
Jason Short 3797c25867 Off by default 2012-01-20 22:52:29 -08:00
Michael Oborne c2f3cf0cf5 AC fix attitude level hil 2012-01-21 07:52:52 +08:00
Michael Oborne b94c80059b fix scale error 2012-01-21 06:33:18 +08:00
Michael Oborne 3b93418d67 AC sync battery code with arduplane 2012-01-21 06:29:09 +08:00
Michael Oborne 7f272b4c4b fix SITL attitude hil AC 2012-01-20 16:32:25 +08:00
Doug Weibel 2ea9db84e0 Update battery monitoring code for ArduCopter 
Fixes compatibility for APM2.  Also a significant update to the battery monitoring code:  We previously had monitoring modes for individual cell voltages for 3 and 4 cell lipos.  These have been removed as they were never really supported (the cell voltages were computed but were not reported or recorded anywhere).  Also, some clean-up/prep work was done for supporting monitoring 2 separate battery packs.  The CLI battery and current monitoring tests were consolidated into 1 test.
changed
 2012-01-15 17:10:02 -07:00
Doug Weibel 17b3e514dc Just a little more commenting work on global variables 2012-01-15 16:11:02 -07:00
Jason Short f326a5a9ea APM2 Channel assignments 2012-01-15 10:24:16 -08:00
Jason Short 7e411f5fb6 This allows users to test the Auto_throttle hold or cruise value 2012-01-14 11:43:52 -08:00
Jason Short 3879e79898 b2 2012-01-14 11:37:00 -08:00
Jason Short cf51967bbb Fix for SIMPLE mode 2012-01-14 11:32:48 -08:00
Jason Short 6714ab49ad Tweak to make circle mode scripting more accurate 2012-01-14 11:21:50 -08:00
Jason Short e7ad08e209 adjusted GPS watch dog not to be so aggressive, 
removed unneeded flag clearing
 2012-01-14 11:20:40 -08:00
Jason Short 11e1df497d lowered Loiter I, commented out unused var 2012-01-14 11:20:40 -08:00
Jason Short f25d741f62 temp removed alt D term until more testing 2012-01-14 11:20:40 -08:00
Jason Short e6ec80bb21 Clarified the Increment for WP total 2012-01-14 11:20:40 -08:00
Jason Short 6d0329b08c added notes, removed redundant save wp_total 2012-01-14 11:20:40 -08:00
Jason Short 24b760d48f added update throttle cruise function 2012-01-13 16:48:05 -08:00
Jason Short 414a2581a0 Made RTL always the current Altitude 2012-01-13 16:47:38 -08:00
Jason Short c970ba4f93 made resetting throttle cruise a function 2012-01-13 16:47:08 -08:00
Jason Short 589f8bc557 Disabled Ryans filter until we get real-world testing in. 2012-01-13 12:48:02 -08:00
Jason Short 05dce91c24 fixed GPS bug - moved to fast loop location 2012-01-13 12:47:22 -08:00
Jason Short 8de6e0e223 made landing shoot for below home by 2 meters to avoid bounce up. 2012-01-13 12:46:40 -08:00
Jason Short 9a0539f39e tuned down Alt hold D gain 2012-01-13 09:36:51 -08:00
Jason Short 81413d2a76 re-enabled relay test 2012-01-13 08:55:02 -08:00
Jason Short 09c4bbe46e Added simple constrain for Alt d term 2012-01-13 08:49:55 -08:00
Jason Short b9419e0123 moved GPS routines to 50hz loop to avoid delay. 2012-01-12 22:59:47 -08:00
Jason Short b81f9a5d77 Version 2.2 2012-01-12 22:37:33 -08:00
Jason Short b884462ce3 removed wind comp code, 
Added Landing boost code
 2012-01-12 22:28:58 -08:00
Jason Short 5418d330f6 Added a small D term on alt hold 2012-01-12 22:28:58 -08:00
Jason Short 6d0f078fdd Added Landing throttle control to force down the copter 2012-01-12 22:28:58 -08:00