Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
28,951 Commits 71 Branches 509 Tags 758 MiB
Commit Graph

2807 Commits

Author SHA1 Message Date
Peter Barker cb7686001f Plane: add dataflash as a bit for the mavlink SYS_STATUS message 2016-08-11 17:48:44 -03:00
Andrew Tridgell 82382a7e9c Plane: changed startup order 
this allows BoardConfig to report errors in a way that allows for
BRD_TYPE to be changed by the user
 2016-08-10 19:54:01 +10:00
Tom Pittenger e0136dc545 Plane: remove AP_Vehicle::FixedWing dependency in ap_airspeed 2016-08-08 00:02:42 -07:00
Tom Pittenger f85fc7c1dc Plane: pass in max airspeed via function call instead of using aparm 2016-08-08 00:02:42 -07:00
Tom Pittenger fc50f145ce Revert "ArduPlane: Convert references to AP_Airspeed. Added automatic migration of ARSPD_FBW_MIN and ARSPD_FBW_MAX (plane parameter) to ARSPD_FBW_MIN and ARSPD_FBW_MAX (library parameter)." 
This reverts commit da1b18d918.
 2016-08-07 17:54:24 -07:00
Tom Pittenger 8dad05d12e Revert "Airspeed: store reference in libraries and populate it" 
This reverts commit c090ba2257.
 2016-08-07 17:54:24 -07:00
Tom Pittenger 5fd3c79202 Plane: Fix typos 2016-08-04 11:42:41 -07:00
Ricardo de Almeida Gonzaga 7a9fe95ccb ArduPlane: Fix typos 2016-08-04 11:41:18 -07:00
Tom Pittenger c090ba2257 Airspeed: store reference in libraries and populate it 
- also had to move the initial definition in plane.h so it happened before the others.
 2016-08-04 11:06:44 -07:00
AndersonRayner da1b18d918 ArduPlane: Convert references to AP_Airspeed. Added automatic migration of ARSPD_FBW_MIN and ARSPD_FBW_MAX (plane parameter) to ARSPD_FBW_MIN and ARSPD_FBW_MAX (library parameter). 2016-08-04 10:09:04 -07:00
Andrew Tridgell 63317e9430 Plane: added throttle suppression for quadplanes 
this tries to prevent motor start when on ground. Motors instead go
into spin_when_armed state
 2016-08-04 09:43:40 -07:00
Gustavo Jose de Sousa f2dec971e7 waf: add "ap_" prefix to keywords "libraries" and "vehicle" 
As an effort to keep things specific to ardupilot API in the build system
consistent and easy way to identify.
 2016-08-01 22:04:16 -03:00
Tom Pittenger f90957e7ed Plane: remove all threat logic in adsb lib in favor of avoidance lib 2016-08-01 15:27:41 -07:00
mirkix 5f5c200625 ArduPlane: Fix filename in header 2016-07-28 18:24:24 -03:00
Lucas De Marchi c27ebd10c2 ArduPlane: Remove i2c lockup count 
This was returned only for a single bus and on all supported platforms
this is hardcoded to 0.
 2016-07-28 18:03:09 -03:00
Andrew Tridgell 388b7ad6bd Plane: fixed is_flying_vtol() for non-quadplane 2016-07-27 07:43:16 +10:00
Andrew Tridgell f65b46385c Plane: added engine cut on land final in quadplane 2016-07-25 15:46:17 +10:00
Andrew Tridgell 37f71bc6d6 AP_Mission: support DO_ENGINE_CONTROL 2016-07-25 10:06:03 +10:00
Andrew Tridgell 327a057ee0 Plane: added internal combustion engine support 
this allows for automatic engine start and restart
 2016-07-25 10:06:03 +10:00
Andrew Tridgell 02babb71b3 ArduPlane: adjust for 16 channels in SERVO_OUTPUT_RAW 2016-07-25 10:06:02 +10:00
Andrew Tridgell 9602d208a2 Plane: fixed disarm by rudder in quadplane 2016-07-25 06:08:36 +10:00
Tom Pittenger 3f195df9f0 Plane: handle ADSB-Out packets 2016-07-22 13:38:58 -07:00
Tom Pittenger 5c3cca7911 Plane: handle incoming ADSB transceiver packet 2016-07-22 12:20:39 -07:00
Andrew Tridgell 3f0a8d1761 Plane: added AP_Button support for plane 
this also adds the g2 parameter table
 2016-07-22 15:01:20 +10:00
Andrew Tridgell 7b147e3941 Plane: handle PLAY_TUNE message 2016-07-22 15:00:17 +10:00
Grant Morphett b8011fd46c Rover|Plane: Just fixing a spelling mistake. 2016-07-22 08:23:07 +10:00
Tom Pittenger 3177dc2f31 Plane: ADSB service needs to run at 10Hz for dynamic ADSB data 2016-07-20 22:46:51 -07:00
Tom Pittenger ab38b12f2c Plane: adsb specific status updates 2016-07-20 22:40:14 -07:00
Tom Pittenger 26efd90603 Plane: allow landing height adjustment on wp before land (aka approach wp) 2016-07-20 22:29:31 -07:00
Andrew Tridgell 4da3236c07 Plane: separate out landing height adjustment from barometer changes 
this stores a landing height adjustment for an aborted landing
without adjusting barometer readings, applying them only on landing
 2016-07-20 22:04:21 -07:00
Andrew Tridgell 9e812d3bda Plane: don't auto-update home and baro on large height change 
if we land at a remote location with a different height we should not
update baro and home. This also prevents us updating baro and home if
we disarm in flight
 2016-07-20 13:22:00 +10:00
Andrew Tridgell 569cc1c108 Plane: support the LED_CONTROL MAVLink message 2016-07-19 13:37:14 +10:00
Tom Pittenger 601ab9dad0 Plane: remove GCS send_statustext spam 
Plane: remove GCS send_statustext spam when recalculating glide slope
 2016-07-18 18:56:59 -07:00
Allan Matthew c479fcab39 Plane: support GPS_INPUT mavlink message 2016-07-12 15:35:09 +09:00
Tom Pittenger 7751bee3be Revert "Plane: coverity scan - variables not initialized in constructor" 
This reverts commit 9b807fa8a5.
 2016-07-11 22:02:30 -07:00
Andrew Tridgell e8976d3a89 Plane: check for optflow enable in more places 2016-07-12 09:05:52 +10:00
mirkix d018a32545 Plane: Only init optflow when enabled by parameter 2016-07-12 09:00:46 +10:00
Andrew Tridgell c926d7d41f Plane: fixed typo in quadplane landing detector 
thanks to Paul for spotting this!
 2016-07-08 18:38:43 +10:00
Andrew Tridgell b6f58bdd98 Plane: don't give tuning errors when VTOL inactive 2016-07-06 14:41:49 +10:00
Tom Pittenger 9b807fa8a5 Plane: coverity scan - variables not initialized in constructor 2016-07-05 13:31:51 -07:00
Andrew Tridgell 96d785f1c6 Plane: added auto_navigation_mode flag 
this fixes a problem where modes like loiter and auto would allow for
rudder stick mixing even with STICK_MIXING=0
 2016-07-05 12:52:13 +10:00
Randy Mackay 2484486999 Plane: log rally points on startup 2016-07-04 11:17:15 +09:00
Tom Pittenger 0597dbd033 Plane: allow SET_ATTITUDE_TARGET to set rpy and throttle 2016-07-01 08:28:53 -07:00
Tom Pittenger 85afd9e245 Plane: remove guided roll flag, handle it with timer=0 2016-06-30 07:48:37 -07:00
Michael Day 8ac433f991 Plane: Can now command roll from a companion computer. 2016-06-30 10:27:44 -04:00
Andrew Tridgell ec367d4a09 Plane: re-order channel initialisation 
this fixes a problem with spurious throttle output during board
startup. Many thanks to Marco for finding this!
 2016-06-30 16:48:30 +10:00
Andrew Tridgell 8fd31111ad Plane: fixed waf build with tricopter quadplane 2016-06-30 14:16:52 +10:00
Andrew Tridgell bf2e30f858 Plane: removed demo_servos() 
this really didn't help much and slows down startup
 2016-06-27 10:19:26 +10:00
Andrew Tridgell 66e43bf6a2 Plane: start with low integrator on back quadplane transition 
When changing to alt_hold controller in quadplane with significant
airspeed set the initial integrator to minus the hover throttle to
allow the accel controller to climb slowly
 2016-06-27 10:18:20 +10:00
Leonard Hall f1bca63094 Plane: consolidate input_euler_angle calls to use smoothing gain 2016-06-24 17:17:19 +09:00
Andrew Tridgell 1256c2f351 Plane: changed for AP_Vehicle API change 2016-06-24 11:39:23 +10:00
Tom Pittenger d2365c25c6 Plane: increase update_waypoint() distance threshold during update_loiter() 
- outside this radius of a loiter waypoint is where crosstracking is available
 2016-06-23 12:43:03 -07:00
Andrew Tridgell f514e76f52 Plane: reset ground_start_count if we lose 3D fix 
thanks to Michael for this suggestion
 2016-06-22 21:25:11 +10:00
Randy Mackay 82bd847e11 Plane: add AC_Avoidance, AC_Fence to build 2016-06-22 11:38:15 +09:00
Randy Mackay 9201a57c83 QuadPlane: include AC_Avoidance, AC_Fence 
This is required because of AC_WPNav's use of the new avoidance library to stop at the fence
 2016-06-22 11:38:15 +09:00
Tom Pittenger 9b973fb899 Plane: add ADSB_streamrate 2016-06-19 11:24:31 -07:00
Randy Mackay ef1385c9ed QuadPlane: add comment that eeprom 28 and 41 were used for THR_MIN, MID 2016-06-18 11:55:49 +09:00
Randy Mackay 413f82bac1 Plane: remove unused definitions 2016-06-18 11:55:49 +09:00
Randy Mackay b456a38432 QuadPlane: remove throttle_mid 
motor's hover throttle is automatically updated
 2016-06-18 11:55:49 +09:00
Randy Mackay 2523ba892b QuadPlane: set attitude vs throttle priority in attitude controller 2016-06-18 11:55:49 +09:00
Randy Mackay f2b0f09d6f QuadPlane: remove THR_MIN 2016-06-18 11:55:49 +09:00
Tom Pittenger f05c698176 Plane: fix compile error for RANGEFINDER_ENABLED 
Plane: #define check for rangefinder enabled in relative_ground_altitude()
 2016-06-16 14:19:10 -07:00
Andrew Tridgell 40db90cebe Plane: limit roll and pitch to Q_ANGLE_MAX in Q modes 
planes often have large LIM_ROLL_CD
 2016-06-16 22:00:04 +10:00
Andrew Tridgell b1b73e2d99 Plane: improved quadplane landing detector 
look for no vertical position change for 5s as well as low motors
 2016-06-16 18:17:56 +10:00
Tom Pittenger 773962940c Plane: quadplane for fwd_throttle integrator inhibit reverse thrust and allow min>0 for petrol 2016-06-13 14:31:50 -07:00
Tom Pittenger b6196dfa92 Plane: compiler warning in print: float to double promotion 2016-06-13 14:03:40 -07:00
Andrew Tridgell 107691b7a7 Plane: fixed initial descent rate in quadplane auto land 2016-06-11 14:37:44 +10:00
Andrew Tridgell f8e0e91cbd Plane: prepare for 3.6.0 2016-06-11 09:20:05 +10:00
Andrew Tridgell eb8cd13a50 Plane: update release notes for 3.6.0 2016-06-11 09:19:13 +10:00
Andrew Tridgell e05c7b3367 Plane: check if terrain following is enabled in AGL calculation 2016-06-10 17:48:32 +10:00
Andrew Tridgell 19834c12e2 Plane: log start of quadplane transition 2016-06-10 17:48:32 +10:00
Andrew Tridgell 8156b3f7de Plane: fixed quadplane landing transition altitude 2016-06-10 17:48:32 +10:00
Andrew Tridgell 07564aa03f Plane: fixed an attitude control bug in quadplane transition 
The motors would briefly spike at the end of the transition which
could cause a major pitch deviation
 2016-06-10 17:48:32 +10:00
Tom Pittenger 69f29b51d1 Plane: new param Q_VFWD_ALT to disable VFWD motor below this altitude. Also uses rangefinder 2016-06-10 17:48:31 +10:00
Andrew Tridgell 021aebeac0 Plane: check for high ratio of rmsD to rmsP in tuning 2016-06-10 17:48:31 +10:00
Tom Pittenger 65e0e31a7a Plane: parachute low-alt check should not require auto mode to ever be set 2016-06-08 08:15:11 -07:00
Tom Pittenger 204abfd45e Plane: set heartbeat.system_status to Critical for low-battery failsafe events 2016-06-07 17:14:51 -07:00
Tom Pittenger 263931b4b1 Plane: allow manual parachute releases on the ground 2016-06-07 09:02:09 -07:00
Tom Pittenger ef3d17cc4c Plane: parachute code can not rely on is_flying() because it is unreliable in a stalled aircraft 2016-06-07 09:01:29 -07:00
Tom Pittenger 3140ce6ab6 Plane: change MAVLINK_MSG_ID_SET_POSITION_TARGET_GLOBAL_INT gcs msg to remove abbreviations. Hope it fits! 2016-06-07 08:28:35 -07:00
Tom Pittenger bd270720da Plane: whitespace formatting 2016-06-07 08:27:40 -07:00
Michael Day 429e348824 Plane: Can now change current WP alt via mavlink. 
Uses the mavlink msg SET_POSITION_TARGET_GLOBAL_INT
 2016-06-07 08:16:39 -07:00
Tom Pittenger 01e636065d Plane: non-functional: mostly whitespace and removed extra set result statement 2016-06-07 08:11:05 -07:00
Michael Day 2c0f0a04d8 Plane: Only allow speed changes in GUIDED and AUTO modes. 2016-06-07 08:22:44 -04:00
Michael Day cdeef9d692 Plane: Fence breaches can go to RTL mode with new FENCE_ACTION setting. 2016-06-07 15:46:52 +10:00
E Thomas 7d824247af Differential spoilers support, elevon offset 
Fixed differential spoilers support, added elevon offset
See PR #2935
 2016-06-06 21:55:50 -07:00
Michael du Breuil 037a7980d6 Plane: fix calculation of override PWM 2016-06-06 16:23:43 -07:00
Tom Pittenger ee29f38cdf Plane: moved takeoff flap check to NORMAL checks. 
TODP: add new flight stage FLIGHT_PRE_TAKEOFF to put this sort of thing into
 2016-06-06 14:51:24 -07:00
Samuel Rosenstein 296b279f0d Plane: fixed issue with preflight flaps. Flaps now go down in preflight mode 2016-06-06 14:18:44 -07:00
Michael du Breuil 41bb237799 Plane: remove throttle surpressed message 2016-06-06 15:24:18 +10:00
Andrew Tridgell 5a544002cb Plane: fixed memory leak in mixer setup 2016-06-06 15:21:17 +10:00
Michael du Breuil bb9086b87f Plane: setup mixer in the one second loop when disarmed 2016-06-06 15:17:37 +10:00
Michael du Breuil fc3ab7b691 Plane: rename var to avoid a var with the name of a c++ keyword 2016-06-06 15:17:15 +10:00
Andrew Tridgell c54d553df1 Plane: prevent continually loading the mixer 2016-06-06 15:14:28 +10:00
Michael du Breuil 7f73da535a Plane: if setting a mixer fails then clear the last crc so that it will be attempted again 2016-06-06 07:50:43 +10:00
Andrew Tridgell eae2bf54ca Plane: fixed gcc 6.1 build error 2016-06-06 07:43:45 +10:00
Andrew Tridgell 8d3a58f0a2 Plane: allow tuning of more parameter sets 2016-06-04 19:20:31 +10:00
Andrew Tridgell 835235127c Plane: prevent divide by zero in SITL 
harmless on PX4
 2016-06-04 19:20:18 +10:00
Tom Pittenger b9cee76bbe Plane: fix quadplane integrator to always clip to at least 0 to throttle_max 2016-06-03 23:46:18 -07:00
Tom Pittenger 82763ec8a9 Plane quadplane to use relative_ground_altitude() to take advantage of rangefinder easier 2016-06-03 23:44:21 -07:00
Tom Pittenger f3ceee5389 Plane: use relative_ground_altitude 2016-06-03 23:43:54 -07:00
Tom Pittenger b3f182157c Plane: take advantage of rangefinder support in relative_ground_altitude() 2016-06-03 23:43:43 -07:00
Andrew Tridgell 77b7852ff0 Plane: adjust recommend ranges for quadplane Q_VFWD_GAIN and Q_WVANE_GAIN 2016-06-04 11:04:15 +10:00
Tom Pittenger a596aa5907 Plane: do not log CURR.Throttle because it's already logged elsewhere 2016-06-02 16:59:13 -07:00
Tom Pittenger f83a6ca1ff Plane: fixed variable misspelling 2016-06-02 15:10:51 -07:00
Andrew Tridgell 978a89efa6 Plane: added new ESC calibration method 2016-06-02 18:10:37 +10:00
Andrew Tridgell 860587ece7 Plane: disable parachute checks when min alt is zero 2016-06-02 18:07:16 +10:00
Peter Barker ee5290c178 Plane: avoid switch statement for enabling fence if no fence present 2016-06-02 14:37:21 +10:00
Tom Pittenger 954c987075 Plane: do not parse GEOFENCE packets when geofence is disabled via compile option 2016-06-01 17:38:52 -07:00
Tom Pittenger af1407a155 Plane: disable parachute code when not enabled via compile option 2016-06-01 17:38:51 -07:00
Tom Pittenger ea9e39212f Plane: use new check_latlng helper 2016-06-01 17:38:51 -07:00
Andrew Tridgell da5ce37bbc Plane: fixed gain on -ve stick mixing past 50% 
fixed a sign error in calculating gain on -ve stick mixing beyond 50%
input

thanks to Doug Weibel for a log that showed this effect
 2016-06-02 08:07:55 +10:00
Andrew Tridgell b17c800f44 Plane: use axis specific tuning controller error 
this gives user feedback on the axis they are tuning
 2016-06-01 17:19:33 +10:00
Tom Pittenger a80a87eb09 Plane: simplify TECS prep logic by utilizing auto_state.land_in_progress 2016-05-31 09:46:52 -07:00
Tom Pittenger 4db5b80b37 Plane: add flag for auto_state.land_in_progress 2016-05-31 09:46:51 -07:00
Tom Pittenger 4ebaab86ec Plane: override is_flying for quadplane 2016-05-31 09:46:50 -07:00
Peter Barker 28361afc2a Plane: move telemetry_delayed up into base class 2016-05-31 08:46:09 +10:00
Peter Barker 9ee62aac30 Plane: move adjust_rate_for_stream up 2016-05-29 19:38:50 +10:00
Peter Barker af5a52e2aa Plane: subclass GCS_MAVLink in place of defining its functions for it 2016-05-29 16:21:21 +10:00
Andrew Tridgell f96836ab9a Plane: prevent a discrepancy between EKF origin and home for altitude 2016-05-29 15:47:26 +10:00
Andrew Tridgell ba3576f027 Plane: added tuning error reporting for quadplanes 2016-05-28 17:33:30 +10:00
Andrew Tridgell b56d784ae4 Plane: limit to zero pitch in quadplane on initial transition 2016-05-28 15:08:46 +10:00
Andrew Tridgell 20cf326093 Plane: lower throttle threshold for quadplane is_flying 2016-05-28 07:10:13 +10:00
Tom Pittenger e3930b45df Plane: force the safety_state immediately because we want it to be in effect while we make mixer changes 2016-05-27 21:34:40 +10:00
Tom Pittenger 4785650c95 Plane: remove redundant calls to safety_state 2016-05-27 21:34:40 +10:00
Andrew Tridgell 9933069679 Plane: fixed motor test by percentage in quadplane 2016-05-27 11:53:20 +10:00
Andrew Tridgell 191d6df0ea Plane: moved EKF2 to a new parameter index 
the meanings of many of the parameters have changed. Best to use a new
index to prevent old parameters from causing crashes
 2016-05-25 19:35:17 +10:00
Andrew Tridgell 6e4c0dd3d7 Plane: allow non-blocking calibrations while armed 2016-05-24 17:10:41 +10:00
Andrew Tridgell 0f50f483b8 Plane: update for new airspeed calibration 2016-05-24 17:00:56 +10:00
Andrew Tridgell d3494d1369 Plane: don't stall EKF during baro cal 2016-05-24 17:00:56 +10:00
Andrew Tridgell 5b4bbf08fd Plane: use send_heartbeat wrapper 2016-05-21 15:25:18 +10:00
Andrew Tridgell 4a7dea0c5b Plane: simplify UART setup 2016-05-21 15:25:16 +10:00
Andrew Tridgell 9f47e6417b Plane: always build with MAVLink2 headers 2016-05-21 15:25:16 +10:00
Andrew Tridgell 309dbef2ec Plane: fixed mavlink1 dependency on px4 2016-05-21 15:25:15 +10:00
Andrew Tridgell eee06da1b5 Plane: use HAVE_PAYLOAD_SPACE() 2016-05-21 15:25:14 +10:00
Andrew Tridgell be14714fa4 ArduPlane: update signing timestamp on GPS lock 2016-05-21 15:25:13 +10:00
Andrew Tridgell a103e70460 ArduPlane: handle SETUP_SIGNING message 2016-05-21 15:25:13 +10:00
Andrew Tridgell b7fe96188d Plane: raise range of THR_FS_VALUE 
need to cope with reversed throttle
 2016-05-21 07:39:02 +10:00
Andrew Tridgell e0a9a8196c Plane: fixed throttle failsafe with THR_PASS_STAB=1 
this prevents using pass-thru throttle when in throttle failsafe
 2016-05-21 07:39:02 +10:00
Don Gagne 151686ce9d ArduPlane: SET_SENSORS_OFFSETS support for third compass 2016-05-19 18:51:17 -03:00
Tom Pittenger 36a1054f77 Plane: remove Tom Pittenger as an author since he's now listed as a lead 2016-05-17 19:16:02 -07:00
Tom Pittenger c9167f89eb Plane: add Tom Pittenger as co-lead developer 2016-05-17 19:03:38 -07:00
Tom Pittenger 30c5c9eb5d Plane: log SONR.DistCM in cm as SONR.Dist as meters 2016-05-17 18:59:37 -07:00
Tom Pittenger 00863623d7 Plane: SONR logging, remove BaroAlt,GSpd,Thr 2016-05-17 18:59:22 -07:00
Tom Pittenger b2fb2f3949 Plane: optimize millis() calls by reusing result 2016-05-17 18:59:03 -07:00
Tom Pittenger 1a066cadd2 Plane: fixed float->double print warning 2016-05-17 15:57:26 -07:00
Tom Pittenger 6746b4227a Plane: handle large negative baro offsets (corner case) to self-trigger a land-abort go-around 
new param: LAND_ABORT_DEG
@Description: This parameter is used when using a rangefinder during landing for altitude correction from baro drift (RNGFND_LANDING=1) and the altitude correction indicates your altitude is higher than the intended slope path. Steeper slopes can result in crashes so this allows the option to remember the baro offset and self-abort the landing and come around for a another landing with the correct baro offset applied for a perfect slope. An auto-abort go-around will only happen once, next attempt will not auto-abort again. This operation happens entirely automatically in AUTO mode. This value is the delta degrees threshold to trigger the go-around. Example: if set to 5 deg and the mission planned slope is 15 deg then if the new slope is 21 then it will go-around. Set to 0 to disable. Requires LAND_SLOPE_RCALC > 0.
 2016-05-17 15:41:09 -07:00
Tom Pittenger a1c4103cef Plane: print to GCS the newly calculated glide slope angle 2016-05-17 15:39:05 -07:00
Tom Pittenger f048aafb76 Plane: store auto land slope 
- also changed order of landing slope calc but is functionally the same
 2016-05-17 15:39:05 -07:00
Tom Pittenger 034cd2413e Plane: re-calc landing glide slope to gracefully handle baro offset during long flights 
New param: LAND_SLOPE_RCALC
@Description: This parameter is used when using a rangefinder during landing for altitude correction from baro drift (RNGFND_LANDING=1) and the altitude correction indicates your altitude is lower than the intended slope path. This value is the threshold of the correction to re-calculate the landing approach slope. Set to zero to keep the original slope all the way down and any detected baro drift will be corrected by pitching/throttling up to snap back to resume the original slope path. Otherwise, when a rangefinder altitude correction exceeds this threshold it will trigger a slope re-calculate to give a shallower slope. This also smoothes out the approach when flying over objects such as trees. Recommend a value of 2m.

default value is 2 (so, enabled by default)
 2016-05-17 15:39:04 -07:00
Tom Pittenger 4a6dd5a781 Plane: reset baro drift when setting home while disarmed 2016-05-17 15:32:42 -07:00
Andrew Tridgell e3b2e90a27 Plane: cleanup unnecessarily complex gcs[] usage 2016-05-17 08:27:39 +10:00
dgrat 48c243bed0 ArduPlane: Do not use is_zero() for non-float types 2016-05-16 19:08:35 -03:00
Tom Pittenger 7af888633d Plane: 3of3 add loiter_xtrack option flag for post-loiter navigation 
0 to crosstrack from center of waypoint, 1 to crosstrack from tangent exit location
 2016-05-16 11:50:54 -07:00
Tom Pittenger 78d6291e2c Plane: corrected land abort gcs msg 2016-05-13 17:22:13 -07:00
Tom Pittenger 6c0579a895 Plane: for better helical landings allow for instant approach stage if previous nav cmd was LOITER_TO_ALT 2016-05-13 17:22:07 -07:00
Tom Pittenger ba5b4e694c Plane: log NTUN:ArspdErr airspeed error (in meters) 2016-05-13 17:22:01 -07:00
Tom Pittenger 1551b9d881 Plane: remove redundant logging in NTUN 2016-05-13 17:22:00 -07:00
Tom Pittenger 8a58f5a5eb Plane: convert airspeed_error_cmd to airspeed_error (in meters) 2016-05-13 17:21:59 -07:00
Tom Pittenger 25dfb583d5 Plane: adjust target_airspeed with and without airspeed sensor (pitot) 2016-05-13 17:14:47 -07:00
Andrew Tridgell 2a0476483b Plane: make takeoff less noisy with zero timeout 2016-05-14 08:26:10 +10:00
Andrew Tridgell 574ba71ef3 Plane: update for AP_TECS API change 2016-05-14 08:26:10 +10:00
Ricardo de Almeida Gonzaga 1fad971851 ArduPlane: Fix typos 2016-05-13 19:20:07 -03:00
Michael du Breuil 7142bacfaa Plane: improve user friendliness of throttle fs msg 2016-05-11 09:00:55 -07:00
Andrew Tridgell 12e0012b16 Plane: allow for NAV_LOITER_UNLIM and NAV_LOITER_TIME in quadplane 2016-05-11 15:57:41 +10:00
Andrew Tridgell 3fc43b94f9 Plane: separate out auto and guided VTOL states 
this prevents a switch to AUTO from using VTOL mode incorrectly
 2016-05-11 15:14:43 +10:00
Andrew Tridgell bcc64e0b4a Plane: fixed tiltrotor build failure 
mixup with merge of RC_Channel changes
 2016-05-11 09:25:43 +10:00
Andrew Tridgell 691d4b6ca7 Plane: added local reached_loiter_target() 
this distinguishes between VTOL and fixed wing loiter targets
 2016-05-11 05:55:26 +10:00
Andrew Tridgell 52ea443d65 Plane: added Q_THR_MIN 2016-05-11 05:55:26 +10:00
Andrew Tridgell a61d608915 Plane: fixed numerical error if starting VTOL landing at destination 2016-05-11 05:55:25 +10:00
Andrew Tridgell 357ed1f4b9 Plane: enable weathervaning in GUIDED and TAKEOFF quadplane modes 2016-05-11 05:55:25 +10:00
Andrew Tridgell 6b358a5618 Plane: added Q_GUIDED_MODE parameter 
this allows you to do hybrid VTOL and fixed wing guided mode
 2016-05-11 05:55:25 +10:00
Andrew Tridgell 3bd5b42c69 Plane: refactor quadplane land controller as general VTOL position controller 2016-05-11 05:55:25 +10:00
Andrew Tridgell 6fdaaa7d98 Plane: new tilt compensation method 2016-05-11 05:55:25 +10:00
Andrew Tridgell 46bf2b83f5 Plane: use equal thrust in tiltrotors when over Q_TILT_MAX 2016-05-11 05:55:24 +10:00
Andrew Tridgell eab42c5740 Plane: fixed attitude logging with fast logging off 2016-05-11 05:55:24 +10:00
Andrew Tridgell bbb5f68bb7 Plane: added initial support for tiltrotors and tiltwings 2016-05-11 05:55:23 +10:00
Andrew Tridgell 89a2a92885 Plane: support better build time selection of multicopter frame type 
makes it possible to do "make sitl-tri"
 2016-05-11 05:55:22 +10:00
dgrat 76362caee0 AP_Math: Replace wrap_* functions with template versions 2016-05-10 11:41:26 -03:00
skyscraper 4d769497c9 ArduPlane: RC_Channel refactor 
Fix white space after function name
 2016-05-10 16:21:17 +10:00
skyscraper e9e2f9020d ArduPlane: RC_Channel refactor, reimplement stick_mix_channels 
reimplement the new overload of Plane::stick_mix_channel so
that it calls the existing overload
 2016-05-10 16:21:17 +10:00
skyscraper 7f29903287 ArduPlane: Fix up after refactoring RC_Channel class 
Further to refactor of RC_Channel class which included
adding get_xx set_xx methods, change reads and writes to the public members
to calls to  get and set functionsss

old public member(int16_t)   get function -> int16_t     set function (int16_t)
(expression where c is an object of type RC_Channel)
c.radio_in                     c.get_radio_in()           c.set_radio_in(v)
c.control_in                   c.get_control_in()         c.set_control_in(v)
c.servo_out                    c.get_servo_out()          c.set_servo_out(v)
c.pwm_out                      c.get_pwm_out()            // use existing
c.radio_out                    c.get_radio_out()          c.set_radio_out(v)
c.radio_max                    c.get_radio_max()          c.set_radio_max(v)
c.radio_min                    c.get_radio_min()          c.set_radio_min(v)
c.radio_trim                   c.get_radio_trim()         c.set_radio_trim(v);

c.min_max_configured() // return true if min and max are configured

Because data members of RC_Channels are now private and so cannot be written directly
 some overloads are provided in the Plane classes to provide the old functionality

new overload Plane::stick_mix_channel(RC_Channel *channel)
which forwards to the previously existing
void stick_mix_channel(RC_Channel *channel, int16_t &servo_out);

new overload Plane::channel_output_mixer(Rc_Channel* , RC_Channel*)const
which forwards to
(uint8_t mixing_type, int16_t & chan1, int16_t & chan2)const;

Rename functions

 RC_Channel_aux::set_radio_trim(Aux_servo_function_t function)
    to RC_Channel_aux::set_trim_to_radio_in_for(Aux_servo_function_t function)

 RC_Channel_aux::set_servo_out(Aux_servo_function_t function, int16_t value)
    to RC_Channel_aux::set_servo_out_for(Aux_servo_function_t function, int16_t value)

 Rationale:

        RC_Channel is a complicated class, which combines
        several functionalities dealing with stick inputs
        in pwm and logical units, logical and actual actuator
        outputs, unit conversion etc, etc
        The intent of this PR is to clarify existing use of
        the class. At the basic level it should now be possible
        to grep all places where private variable is set by
        searching for the set_xx function.

        (The wider purpose is to provide a more generic and
        logically simpler method of output mixing. This is a small step)
 2016-05-10 16:21:16 +10:00
Andrew Tridgell 9f84a22d22 Plane: removed unnecessary libs 
now in common
 2016-05-10 14:13:39 +10:00
Andrew Tridgell dcb24f2bc1 Plane: use DataFlash::log_while_disarmed() 2016-05-09 12:05:25 +10:00
Andrew Tridgell 51877a20d6 Plane: added some more tuning sets 2016-05-08 18:45:42 +10:00
Andrew Tridgell 35ef20b23a Plane: use separate definition for TUNE_PARM 
this allows the parameter docs to be separated
 2016-05-08 18:35:26 +10:00
Andrew Tridgell 7a8bf033e1 Plane: allow for tuning of single parameters 2016-05-08 14:47:51 +10:00
Leandro Pereira f23bd7e09d GCS_MAVLink: Use a single stream_trigger() implementation 
This has no side effects, but since all implementations were basically
the same, move the implementation to GCS_Common and the only part that
adjusts the rate based on which which stream to each individual
GCS_MAVLINK implementation.
 2016-05-07 23:49:35 -03:00
Lucas De Marchi 0eab8847f2 ArduPlane: remove mention to .pde files 
We don't support them anymore.
 2016-05-07 22:55:48 -03:00
Andrew Tridgell db5f50e08e Plane: convert tuning to use AP_Tuning library 2016-05-07 18:34:15 +10:00
Andrew Tridgell 3853aa0fe3 Plane: fix for changed API 2016-05-07 18:27:22 +10:00
Andrew Tridgell cbbf26a1f6 Plane: removed Log_Write_IMUDT 2016-05-07 18:27:20 +10:00
Andrew Tridgell 3bbc6353d8 Plane: use have_ekf_logging() 2016-05-07 18:27:20 +10:00
Andrew Tridgell 2a7edfd3d1 Plane: fixed setting of failsafe for motors in quadplane 2016-05-07 07:25:33 +10:00
Michael Day b096e1404d Plane: Add MAVLink message handler for CMD_DO_CHANGE_SPEED 2016-05-06 11:59:45 -07:00
Lucas De Marchi fea084a596 Global: use ap_version.h 
This header is used by waf to contain the generated version macros,
particularly using the git hash. For waf it's better to be in a separate
header since it then can keep track of changes on it a trigger
recompilation.

For the make build system, a dummy ap_version.h file has been added in
the missing/ folder so both implementations can co-exist.
 2016-05-06 13:11:28 -03:00
Lucas De Marchi baa287e5e5 ArduPlane: use separate header for version macro 
Having the version macro in the config.h and consequently in the main
vehicle header means that whenever the version changes we need to
compiler the whole vehicle again. This would not be so bad if we weren't
also appending the git hash in the version. In this case, whenever we
commit to the repository we would need to recompile everything.

Move to a separate header that is include only by its users. Then
instead of compiling everything we will compile just a few files.
 2016-05-06 13:11:28 -03:00
Rimvydas Naktinis 3c00324fd2 Plane: Parachute uses altitude above ground (not home) to check suitability for deployment. 2016-05-05 09:02:25 -07:00
Rimvydas Naktinis 9fdf39baf0 Plane: Added a method that returns current altitude relative to terrain, if available, or home otherwise. 2016-05-05 09:02:20 -07:00
Allan Matthew 25c8027606 Plane: handle new MAVLink rangefinder input 2016-05-04 08:40:34 -07:00
Michael du Breuil 0fcfcdc169 Plane: Broadcast POSITION_TARGET_GLOBAL_INT as part of the EXTENDED_STATUS stream 2016-05-01 07:38:23 +10:00
Michael Oborne cd56061b24 ArduPlane: support MAVLINK_MSG_ID_MISSION_ITEM_INT 2016-05-01 07:13:46 +10:00
Andrew Tridgell 226e6f1d6c Plane: only save compass offsets when disarmed and learning enabled 2016-04-30 16:43:14 +10:00
Andrew Tridgell dfa86cff63 Plane: update release notes for 3.6.0beta1 2016-04-30 14:34:47 +10:00
Andrew Tridgell a99616bd10 Plane: prepare for 3.6.0beta1 release 2016-04-30 14:34:47 +10:00
Andrew Tridgell 3a35f8f528 Plane: update release notes for 3.5.3 2016-04-30 14:34:47 +10:00
Andrew Tridgell abfcf89f5e Plane: reduced the rate of EKF and attitude logging to 25Hz 
this will reduce the log file size while not appreciably reducing the
ability to analyse logs
 2016-04-30 14:34:47 +10:00
Andrew Tridgell 0fd044c1f7 Plane: added Q_RTL_MODE parameter 
used to switch to VTOL landing on RTL
 2016-04-30 14:34:47 +10:00
Andrew Tridgell 66d3668ac4 Plane: rapid climb in QRTL if below target altitude 2016-04-30 14:34:47 +10:00
Andrew Tridgell 4666b25258 Plane: initial implementation of QRTL for quadplane RTL 2016-04-30 14:34:47 +10:00
Andrew Tridgell 460885c478 Plane: refactored quadplane landing controller 
allow use in other than AUTO mode
 2016-04-30 14:34:46 +10:00
Michael du Breuil de1e299754 Plane: Remove support for CONDITION_CHANGE_ALT 2016-04-30 10:56:05 +09:00
Niti Rohilla a03941ba02 ArduPlane : Updated handle_guided_request() to report error. 2016-04-29 12:39:28 -03:00
Michael du Breuil 731c68f273 Plane: Change mode to RTL on end of mission rather then staying in auto 
Deleted commands_process as it had 2 lines of useful code left, and was cleaner to move the remaining two lines into the caller case
 2016-04-29 13:12:18 +10:00
Andrew Tridgell ab5ca53e2f Plane: lower default VTOL ANGLE_MAX to 30 degrees 
we don't really want a quadplane at 45 degrees or the wing drag gets
far too high
 2016-04-29 10:23:26 +10:00
Andrew Tridgell 19a1edcd2b Plane: lower default velocity controller gains for quadplanes 
we're getting too many XY velocity controller oscillations. Better to
start with smaller gains
 2016-04-29 10:02:45 +10:00
Andrew Tridgell 6f4d66f346 Plane: support building quadplane with forced motors class 2016-04-28 22:40:45 +10:00
Andrew Tridgell 9c0d984a4e Plane: support forced motor class in quadplane 2016-04-28 22:37:24 +10:00
Andrew Tridgell 00c2b4b30f Plane: reload airspeed after VTOL landing 2016-04-28 08:42:19 +10:00
Andrew Tridgell 1ebe0a2583 Plane: prevent a division by zero in takeoff code 2016-04-26 12:06:57 +10:00
Luis Vale Gonçalves 343b4cb81a Revising ardupilot.com to .org 
Revising ardupilot.com to .org
 2016-04-23 22:49:41 -07:00
Luis Vale Gonçalves 73ac146b7e Revising ardupilot.com to .org 
Revising ardupilot.com to .org
 2016-04-23 22:49:37 -07:00
Andrew Tridgell 38a7bfd81f Plane: added Q_ENABLE=2 for starting AUTO in VTOL 2016-04-23 21:03:46 +10:00
Andrew Tridgell 0aa1ae048d Plane: fixed is_flying() for VTOL flight 
otherwise we may disarm mid-flight!
 2016-04-23 21:03:46 +10:00
Andrew Tridgell 76400a9959 Plane: support DO_VTOL_TRANSITION as a mission item 2016-04-23 21:03:46 +10:00
Andrew Tridgell 07168c3db4 Plane: fixed places that assumed mission command IDs are 8 bit 2016-04-23 21:03:46 +10:00
James Stoyell 4e7e84fc99 Plane: Modified last_valid_rc_ms AFS failsafe input to work when standard failsafe is on 
Ran into a bug on our physical plane where failsafe.last_valid_rc_ms was not recognizing that the transmitter had failed. This is likely due to how the standard failsafe works in receiving lower-than-possible throttle values. So in order to account for this, I added a new variable to the failsafe, AFS_last_valid_rc_ms, and I update it only if the ch3_failsafe (the throttle failsafe) is not on. If the throttle failsafe is on, that means that the plane has indeed lost transmitter input, so the AFS needs to recognize that.
 2016-04-22 11:48:36 -07:00
Randy Mackay 4291139b6c Plane: ack DO_MOUNT_CONTROL messages 2016-04-22 21:30:51 +09:00
Tom Pittenger 9aa25cb7a0 Plane: update flight stage on successful restart_landing_sequence() 2016-04-21 22:54:23 -07:00
Tom Pittenger 2ba9a04bf5 Plane: smooth-out the end of takeoff pitch by reducing takeoff pitch min via TKOFF_PLIM_SEC 
@Description: This parameter reduces the pitch minimum limit of an auto-takeoff just a few seconds before it reaches the target altitude. This reduces overshoot by allowing the flight controller to start leveling off a few seconds before reaching the target height. When set to zero, the mission pitch min is enforced all the way to and through the target altitude, otherwise the pitch min slowly reduces to zero in the final segment. This is the pitch_min, not the demand. The flight controller should still be commanding to gain altitude to finish the takeoff but with this param it is not forcing it higher than it wants to be. (+1 squashed commits)
 2016-04-21 22:54:17 -07:00
Tom Pittenger f12658dd20 Plane: more comments on landing flare 2016-04-21 21:31:01 -07:00
Tom Pittenger fefcf39335 Plane: must be on land approach before flare alt/sec are used 2016-04-21 21:31:00 -07:00
Tom Pittenger 12663eaa48 Plane: simplify flare logic 2016-04-21 21:30:59 -07:00
Tom Pittenger 183369b92a Plane: take advantage of L1 stale flag and correctly inhibit flight stage if not lined up on approach 2016-04-21 21:30:58 -07:00
Tom Pittenger c5a3b1b134 Plane: non-functional change - change labels for approach flight stage criteria 2016-04-21 21:30:56 -07:00
Tom Pittenger c238645e53 Plane: limit roll before calculating load factor 2016-04-21 21:30:56 -07:00
Tom Pittenger aadd9a18ce Plane: log L1 xtrack error integrator and remove extra yaw logging 2016-04-21 21:30:55 -07:00
Tom Pittenger 85913bd237 Plane: rely on flight stage to know if we're doing auto_land in TECS 2016-04-21 21:30:53 -07:00
Tom Pittenger 6a83ad419a Plane: moved update_flight_stage() inside setup_glide_slope() 
the glide_slope gets calculated every time there's a major event such as mission item change or wp_proportion change so its good to update the flight stage then too because.
also logging stage when stage changes, might as well get an extra data point in there when it's timely
 2016-04-21 21:30:51 -07:00
Tom Pittenger ec3e9014e4 Plane: move target land_airspeed logic to top layer 
- this is to allow min groundspeed to be enforced which is otherwise lost when TECS assigns a target airspeed at the lower level
 2016-04-21 21:30:50 -07:00
Andrew Tridgell a549225e60 Plane: support Y6 frame class in quadplane 2016-04-22 10:28:16 +10:00
Rimvydas Naktinis df922dacfa Plane: Suppress throttle when parachute release initiated, not after release. 2016-04-21 09:53:22 -07:00
Andrew Tridgell 2a1985d0f9 Plane: fixed loiter radius at end of mission 2016-04-21 22:29:29 +10:00
Andrew Tridgell de33779382 Plane: added Q_WVANE_MINROLL 
this allows for some roll trim without weathervaning
 2016-04-21 21:52:25 +10:00
Michael du Breuil ef348473eb Plane: Remove tecs_hgt_afe from the 50hz tecs update 2016-04-21 17:03:00 +10:00
Michael du Breuil f5749b44cd Plane: Move position update to 50hz loop rather then the 10hz 2016-04-21 16:53:20 +10:00
Andrew Tridgell cf7b6123a9 Plane: log the number of lost log messages 2016-04-21 16:45:02 +10:00
Andrew Tridgell 8683616d8c Plane: redo scheduler table and improve perf logging 
The scheduler table was still setup for a worst case CPU of
AVR2560. Adjust times for the stm32 and improve perf logging
 2016-04-21 16:45:02 +10:00
Andrew Tridgell a7006a7784 Plane: refactor perf variables into a structure 2016-04-21 16:45:02 +10:00
Andrew Tridgell d013878c17 Plane: improved speed limiting on landing approach in VTOL mode 2016-04-20 18:07:04 +10:00
Andrew Tridgell d8b0d17fe4 Plane: added weathervaning to landing reposition 2016-04-20 17:12:59 +10:00
Andrew Tridgell f34af03891 Plane: added Q_WVANE_GAIN 
this controls weathervaning in VTOL modes. Defaults to off
 2016-04-20 17:12:59 +10:00
Andrew Tridgell e9e43dc016 Plane: added Q_VFWD_GAIN for forward motor in VTOL modes 
this allows for velocity control using the forward motor in VTOL modes
 2016-04-20 16:25:19 +10:00
Lucas De Marchi 0095f6168e ArduPlane: fix handling of SET_HOME_POSITION 
Location.altitude is stored in cm.
 2016-04-18 13:07:45 +10:00
Michael du Breuil c17ea21a97 Plane: Add support for DO_REPOSITION via COMMAND_INT 
also allows guided to change loiter directions
 2016-04-17 19:00:03 -07:00
Andrew Tridgell 62574b35b5 Plane: fixed negative loiter radius values 2016-04-18 09:33:20 +10:00
Andrew Tridgell edd15f15c0 Plane: added some fixed wing in-flight transmitter tuning 2016-04-16 20:47:18 +10:00
Andrew Tridgell 27fb35253c Plane: added in-flight transmitter tuning 2016-04-16 20:26:43 +10:00
Tom Pittenger 436062ef37 Plane: improved crash detection 
- fixes bug where a bungee launch is configured but the aircraft gets bumped and triggers the prop to spin up. This will now detect that and "crash' and disable the motor
 2016-04-14 22:34:46 -07:00
Grant Morphett 2887e48178 Plane: Fixed bug with landing flare for high values of LAND_FLARE_SEC 
I had an issue in SITL where my plane would round the last WP staring
its landing approach and immediately limit the roll to 5degress even
before the plane had finished turning the corner so it would go WAY
off course.  For a high value of LAND_FLARE_SEC (mine was 5) the math
works out the plane has landed if
    height <= sink_rate * land_flare_sec
During the banking of the last corner the plane started to decend and
quickly set itself up for a 6.1m/s sink rate which is normal.  It was
at 30 meters altitude.  As you can see at this point the math thinks
the plane has landed so limits the roll.  The solution was to ensure
the plane had covered at least 50% of the distance toward the final
waypoint before allowing a flare to happen.  Note that LAND_FLARE_SEC
above 2 is considered very high and this normally wouldn't occur.
 2016-04-15 13:02:11 +10:00
Andrew Tridgell 154fe15c67 Plane: fixed build warning 2016-04-15 09:22:41 +10:00
Tom Pittenger ff57884eca Plane: renamed variable, non-functional change 2016-04-14 13:18:35 -07:00
Andrew Tridgell 3a242ee4a9 Plane: support up to 16 output channels 
the extra channels can be used via SBUS output
 2016-04-14 08:05:06 +10:00
Michael du Breuil 78442b7e81 Plane: make the initialization of the gcs instances follow the define 2016-04-11 17:54:46 -07:00
Andrew Tridgell 06bcf0df4b Plane: change default loop rate for quadplanes to 300Hz 2016-04-11 09:32:45 +10:00
Andrew Tridgell 1fe9582ac3 Plane: back to velocity controller for quadplane landing 
now with much smoother attitude control thanks to some help from
Leonard
 2016-04-10 22:01:19 +10:00
Andrew Tridgell 4a5c4a5189 Plane: not in vtol mode when quadplane not enabled 
prevents logging error in auto if quadplane not enabled and running a
VTOL mission command
 2016-04-10 22:01:18 +10:00
Ricardo de Almeida Gonzaga 5bd034a5a8 Global: start using cmath instead of math.h 2016-04-05 21:06:19 -07:00
Andrew Tridgell 97a7192f76 Plane: make it more obvious that AUTO_FBW_STEER is not for normal use 2016-04-06 07:58:23 +10:00
Andrew Tridgell 5f1ad68bd9 Plane: improved velocity controller for quadplane landing 2016-04-04 09:50:35 +10:00
Andrew Tridgell 8b30569ad1 Plane: setup quadplane earlier in startup 
this ensures the GCS gets the full parameter list as the param count
will be set before mavlink starts
 2016-04-03 06:49:38 +10:00
Andrew Tridgell 5cc4b20c73 Plane: smooth out final descent for landing 2016-04-02 22:45:51 +11:00
Andrew Tridgell 197cefaaa7 Plane: prevent large nose-down on start of velocity controller 2016-04-02 21:19:06 +11:00
Andrew Tridgell ae51e51c6a Plane: use velocity controller for initial quadplane landing 2016-04-02 20:54:01 +11:00
Andrew Tridgell b1266603a6 Plane: setup immediate pitch limit on quadplane takeoff 
this prevents a single loop with large pitch down demand
 2016-04-02 19:53:48 +11:00
Andrew Tridgell 913cf9dd37 Plane: set min quad throttle to 10% 
fixes spin when armed
 2016-04-01 22:18:51 +11:00
Andrew Tridgell 7f85c14c96 Plane: fixed landing detector for new AP_Motors code 2016-04-01 21:54:32 +11:00
Andrew Tridgell 70679a06aa Plane: fixed quadplane throttle control in AUTO 2016-04-01 17:29:51 +11:00
Andrew Tridgell 52cc369f15 Plane: fixed typo in AP_Motors conversion 2016-04-01 16:45:01 +11:00
Andrew Tridgell e7f7afcc4d Plane: added correct filter defaults 2016-04-01 16:44:49 +11:00
Andrew Tridgell 9cf909607f Plane: setup reasonable quadplane defaults 2016-04-01 16:40:06 +11:00
Andrew Tridgell dd6c4d6225 Plane: fixed up parameters for quadplane 
this fixes quadplane parameters for the new AP_Motors code
 2016-04-01 16:17:07 +11:00
Randy Mackay b96ea15220 Plane: quadplane uses AC_AttitudeControl_Multi 2016-04-01 11:59:30 +09:00
Randy Mackay 41b584ac9e Plane: fix quadplane qstabilize throttle input 2016-04-01 11:59:30 +09:00
Randy Mackay 52caed2573 Plane: QTUN df messages angle boost field as float 2016-04-01 11:59:30 +09:00
Randy Mackay 70f81ee338 Plane: remove multicopter PID parameters 
These have been moved to the AC_AttitudeControl class
 2016-04-01 11:59:30 +09:00
Randy Mackay 39f795d9fd Plane: quadplane sets motors desired spool state 2016-04-01 11:59:30 +09:00
Andrew Tridgell f73c8ab8ed Plane: allow testing of all motors in sequence 
this makes for an easier startup test for a quadplane, allowing a
single MAVLink command to test that all motors are working correctly
in the right sequence
 2016-04-01 11:09:51 +11:00
Tom Pittenger 6718241dad cleanup comments 2016-03-29 05:32:28 -07:00
Gustavo Jose de Sousa a4c099feaa waf: create program groups for main products 
Currently we need to build a different binary for each type of copter frame.
This is a preparation for setting all those binaries to a group called
"copter". We create the groups for the rest of the main products for
consistency.
 2016-03-26 15:43:08 -03:00
Andrew Tridgell dc9d87fde3 Plane: prepare for 3.5.2 release 2016-03-26 14:52:17 +11:00
Andrew Tridgell 8a6e5ffe80 Plane: fixed bug in rangefinder landing 
introduced with QLAND change
 2016-03-26 10:06:07 +11:00
Andrew Tridgell b47b558246 Plane: change code URL 2016-03-25 20:47:03 +11:00
Andrew Tridgell 4d7beab8cc Plane: added QTUN logging for quadplane 2016-03-25 12:33:19 +11:00
Andrew Tridgell 0a199945a2 Plane: added copter RATE logging for quadplane 2016-03-25 12:13:59 +11:00
Andrew Tridgell 1fa075e7a8 Plane: change default quadplane gains 
lower filter frequency, higher I gain for roll/pitch
 2016-03-25 10:16:15 +11:00
Lucas De Marchi f258b66627 ArduPlane: Update path locations for parameters 
Thanks to Francisco Ferreira for noticing that.
 2016-03-23 17:50:38 -03:00
Andrew Tridgell 0442c2c659 Plane: prepare for 3.5.1 release 2016-03-21 09:44:52 +11:00
Andrew Tridgell f0eddd6366 Plane: ensure we always eventually capture a loiter 2016-03-18 13:47:45 +11:00
Andrew Tridgell 30ca9fbb01 Plane: cope with upgrade to shifted indexes for quadplane 2016-03-18 12:33:58 +11:00
Michael du Breuil 35bb6a634e Plane: Make base_mode armed status depend upon the arming library, not soft armed 2016-03-17 15:16:17 +11:00
Don Gagne cae7ea0d13 Add @Volatile, @ReadOnly support 2016-03-17 10:58:05 +11:00
Lucas De Marchi e01d49ff53 ArduPlane: replace header guard with pragma once 2016-03-16 18:40:45 +11:00
Michael du Breuil 0117522998 Plane: Use arming voltage 2016-03-14 09:06:58 -07:00
Andrew Tridgell 89970e4eaa Plane: support motor_test for quadplanes 2016-03-13 10:05:10 +11:00
Andrew Tridgell d644474817 Plane: support octaquad planes 2016-03-13 10:04:25 +11:00
Andrew Tridgell d7d528560d Plane: don't start summing for loiter until we reach loiter circle 2016-03-10 15:43:28 +11:00
Tom Pittenger f3638f421e Plane: fix short loiters exiting early 2016-03-10 15:42:18 +11:00
Michael du Breuil f60b3fd6c7 Plane: remove "Command recieved" statustext 2016-03-10 15:36:05 +11:00
Andrew Tridgell f4ccf94dfc Plane: added QLAND mode 
for VTOL landing. Use for failsafe as well
 2016-03-09 18:20:41 +11:00
Andrew Tridgell 927efa90f8 Plane: fixed log printing of Q modes 2016-03-09 17:29:13 +11:00
Don Gagne 1df7baa5c5 Plane: update quadplane param description increment 2016-03-08 09:27:56 +09:00
Tom Pittenger ff249788bf Plane: add a default Navigation option as explained in the param docs 2016-03-03 09:16:26 -08:00
Randy Mackay f66d5f7a8c Plane: use ahrs.get_origin instead of ekf.getOriginLLH 
This ensures we get the origin from the active EKF
 2016-03-03 16:20:59 +09:00
Tom Pittenger 75be40ea59 Plane: add LAND_THR_SLEW 2016-03-02 10:54:19 -08:00
Tom Pittenger ed6aa4ed17 Plane: added throttle limiting via max power (current*voltage) 2016-03-02 10:20:44 -08:00
Tom Pittenger bf5005103c Plane: allow loiter waypoints to have a zero lat/lng or alt to mean use current 2016-03-02 08:49:11 -08:00
Tom Pittenger be3941efdf Plane: unify loiter mission items to require heading to next wp 
- except loiter_unlimited because it never exits
 2016-03-02 08:48:25 -08:00
Tom Pittenger 9e452838ab Plane: loiter missions to default to loiter_radius if mission says 0 or 1. 
- except loiter_unlim which uses RTL_loiter, although I'm not sure why.
 2016-02-29 10:12:20 -08:00
Tom Pittenger ed98617d42 Plane: utilize radius for loiter commands 2016-02-29 06:43:29 -08:00
Andrew Tridgell f35d05e374 Plane: improved quadplane default gains 
0.25 is better for an average quadplane for roll/pitch

0.5 is a bit high for accel-z, 0.3 is better
 2016-02-29 21:46:27 +11:00
Andrew Tridgell 93ac82e1f6 Plane: write voltage/current much more frequently 2016-02-29 21:24:54 +11:00
Will Sackfield fabe235130 ArduPlane: initialize the fail_test variable 
* Clang complains if variables are not initialized
 2016-02-29 14:14:37 +11:00
Will Sackfield 5f5035933f ArduPlane: static cast to uint8 on initialization of struct 
* clang requires that the casting be explicit
 2016-02-29 14:14:37 +11:00
Andrew Tridgell 968f07f583 Plane: allow live quadplane PID tuning 2016-02-29 14:10:32 +11:00
Tom Pittenger b8fc524954 Plane: enforce expected flight_stage in TECS 2016-02-25 06:37:24 -08:00
Tom Pittenger 993e5b438c Plane: add to LAND_NEUTRL behavior 
offer netrual vs disabled outputs
 2016-02-25 05:51:44 -08:00
Tom Pittenger 6399d00950 Plane: convert to using static send_statustext 
- no more MSG_STATUSTEXT
- TODO: replace calls to gcs_send_text and gcs_send_text_fmt to GCS_MAVLINK::send_statustext()
 2016-02-24 09:18:06 +11:00
Andrew Tridgell ad78a31255 Plane: move set_dataflash(0 for static logging 2016-02-24 09:18:05 +11:00
Tom Pittenger 881dabf048 Plane: add missionLoaded arming check fail for mis.len <= 1 2016-02-22 16:19:40 +11:00
Andrew Tridgell 1acf25b6e2 Plane: use set_dataflash() 
give GCS_MAVLINK a dataflash object for logging text messages
 2016-02-22 12:34:32 +11:00
Andrew Tridgell b84b480086 Plane: added PID tuning for quadplane modes 2016-02-20 20:20:27 +11:00
Andrew Tridgell e2abaefc44 Plane: check SCHED_LOOP_RATE for quadplane 2016-02-20 20:02:52 +11:00
Lucas De Marchi 0b22b520b8 ArduPlane: remove unused CMAKE define 
This is a leftover from previos cmake build system.
 2016-02-19 19:15:39 -02:00
Peter Barker ca4017d093 Plane: defines.h should not use defines from config.h 
config.h includes defines.h early, so defines in config.h are unavailable
 2016-02-19 12:34:23 -02:00
Tom Pittenger d0edfa5dfa Plane: compile warning fix 
/ardupilot/ArduPlane/quadplane.cpp:773:107: warning: implicit conversion from 'float' to 'double' when passing argument to function [-Wdouble-promotion]
 2016-02-17 14:54:02 -08:00
Tom Pittenger 0b26a34f22 Plane: new param LAND_THEN_NEUTRL 
// @Description: When enabled, after an autoland and auto-disarm via LAND_DISARMDELAY happens then set all servos to neutral. This is helpful when an aircraft has a rough landing upside down or a crazy angle causing the servos to strain.
 2016-02-16 23:40:44 -08:00
Andrew Tridgell 8ecf54bf75 Plane: use throttle slew when in quadplane assisted flight 
this prevents a sudden throttle change on a petrol motor when
transitioning
 2016-02-13 11:38:33 +11:00
Tom Pittenger a280396645 Plane: nonfunctional change, comment only. Units were in old in comment 2016-02-12 12:14:38 -08:00
Tom Pittenger c837fbca2f Plane: 3/3 new param TECS_LAND_SRC for Land Sink Rate Change 
// @Description: When zero, the flare sink rate (TECS_LAND_SINK) is a fixed sink demand. With this enabled the flare sinkrate will increase/decrease the flare sink demand as you get further beyond the LAND waypoint. Has no effect before the waypoint. This value is added to TECS_LAND_SINK proportional to distance traveled after wp. With an increasing sink rate you can still land in a given distance if you're traveling too fast and cruise passed the land point. A positive value will force the plane to land sooner proportional to distance passed land point. A negative number will tell the plane to slowly climb allowing for a pitched-up stall landing. Recommend 0.2 as initial value.
 2016-02-12 11:39:27 -08:00
Tom Pittenger 8ac6343730 Plane: removing mission_cmd in TECS and making it bool is_landing 
this is reverse-thrust cleanup suggested by Tridge
 2016-02-12 11:22:59 -08:00
Tom Pittenger d04b5e735f Plane: add SYS_STATUS reverse_motor 
- helpful to tell GCS to interpret VFR_HUD as negative when bit is enabled
- throttle is sent as abs()
 2016-02-11 18:46:01 +11:00
Tom Pittenger fa53263ca9 Plane: make throttle_percentage() signed 2016-02-11 18:46:01 +11:00
Tom Pittenger ebec68c55b Plane: param desc to increase THR_MIN range to include negative thrust 2016-02-10 22:18:07 -08:00
Tom Pittenger f369899509 Plane: restrict rudder arming where reverse_thrust is enabled and commanding negative 2016-02-10 22:18:06 -08:00
Tom Pittenger a920b7322d Plane: more desc for param USE_REV_THRUST 2016-02-10 22:04:50 -08:00
Tom Pittenger 046741d23b Plane: abort landing at 90% throttle instead of 95% 2016-02-08 21:13:43 -08:00
Tom Pittenger b098466e87 Plane: reduce redundant logging of STAT from 6 Hz to 5 Hz 
- STAT log entry was being done every 5 Hz plus at 1 Hz. This removes the 1Hz.
 2016-02-08 21:13:12 -08:00
Tom Pittenger 66fcd8f58a Plane: run is_crashed at 5hz instead of 1hz 2016-02-08 21:13:04 -08:00
Andrew Tridgell 93185be1ff Plane: reset land_pre_flare on mode change 2016-02-09 14:18:02 +11:00
Tom Pittenger 2e92089ce6 Plane: Reverse Thrust 
Reverse thrust for controlled landings, even with much steeper approach slopes. This is achieved by allowing throttle demand to go negative to maintain a target airspeed. A Pre-Flare stage was added, triggered by an altitude, to allow for a slower airspeed just before land. That lower airspeed can be near stall.
new params LAND_PF_ALT, LAND_PF_SEC, LAND_PF_ARSPD, USE_REV_THRUST
 2016-02-09 14:18:02 +11:00
Tom Pittenger 1cb094f12e Plane: make throttle signed (pos and neg) 2016-02-09 14:18:02 +11:00
Tom Pittenger b8d5369ebd Plane: add flight stage LAND_PREFLARE 2016-02-09 14:18:02 +11:00
Andrew Tridgell f8d8616598 Plane: support all types of multicopters in quadplane 
adds Q_FRAME_CLASS for class of multicopter frame
 2016-02-08 11:00:19 +11:00
Andrew Tridgell eeda1b56de Plane: don't do throttle nudge while in geofence failsafe 
user stick inputs should not apply when outside fence
 2016-02-08 10:59:37 +11:00
Tom Pittenger 9157f634eb Plane: Add Tom Pittenger to authors list 2016-02-02 10:50:12 +09:00
Andrew Tridgell 379ca5ac00 Plane: prepare for 3.5.0 release 2016-01-30 13:04:51 +11:00
Andrew Tridgell 99847da297 Plane: release 3.5.0beta2 2016-01-29 12:21:39 +11:00
Andrew Tridgell 125af1b856 Plane: added OVERRIDE_SAFETY parameter 2016-01-29 12:20:14 +11:00
Michael du Breuil bcc939930c Plane: Only resend the mixer configuration if its changed 2016-01-29 12:20:14 +11:00
Andrew Tridgell 8dba91658c ArduPlane: log a picture if AP_Camera::control() returns true 2016-01-29 10:01:51 +11:00
Andrew Tridgell d82c8dcd6d ArduPlane: update for changed AP_Camera API 2016-01-29 09:19:44 +11:00
Dario Lindo Andres 9bba55f937 ArduPlane: Added precise camera trigger logging 
Added update_trigger and check_digital_pin functions
added camera trigger precise time mark
detect camera feedback pin status
added support for simple digital pin
included support for digital pin. Already included in
added support for TRIGGER MSG
 2016-01-29 09:19:43 +11:00
Jonathan Challinger 9000756c80 Plane: reflect changes to AP_Mount 2016-01-23 10:35:47 +09:00
Gustavo Jose de Sousa c2e3f05dbf waf: ardupilotwaf: prefix build context methods with ap_ 
It helps to distinguish between things from waf and things from ardupilotwaf.
 2016-01-22 20:10:29 -02:00
Gustavo Jose de Sousa e9d3dc9e72 waf: vehicles and antennatracker: use methods from bld 
Instead of from ardupilotwaf.
 2016-01-22 20:10:29 -02:00
Gustavo Jose de Sousa cf432e8b3e waf: ardupilotwaf: rename vehicle_stlib to ap_stlib 
That function is not only for vehicles.
 2016-01-22 20:10:28 -02:00
Gustavo Jose de Sousa a35c0d48b0 waf: ardupilotwaf: rename program to ap_program 
Make the rename so that there is no name clashes when defining it as a taskgen
method.
 2016-01-22 20:10:28 -02:00
Andrew Tridgell 115d089904 Plane: continue limiting pitch during last phase of transition 
this prevents a very high pitch demand causing the plane to slow down
to below assist speed
 2016-01-20 18:30:48 +11:00
Andrew Tridgell 0223218c39 Plane: use altitude_error for quadplane climb rate assistance 2016-01-20 17:23:36 +11:00
Andrew Tridgell 69b2421563 Plane: ensure TECS is updated at 10Hz only 2016-01-20 17:23:36 +11:00
Andrew Tridgell 3a3afe42be Plane: don't force disarm on parachute release 
in auto-throttle modes throttle is suppressed. In pilot controlled
modes pilot can lower throttle
 2016-01-19 17:59:53 +11:00
squilter c7e8a48a55 Plane: deploy parachute as fs action 2016-01-19 17:55:58 +11:00
Andrew Tridgell 23eef91c59 Plane: added parameter RTL_RADIUS 
this allows the loiter radius for RTL to be controlled separately from
the radius for loiter (as requested by a user)
 2016-01-19 15:04:30 +11:00
Andrew Tridgell 3a9ebe3a8a Plane: added Q_TRAN_PIT_MAX 2016-01-19 11:05:56 +11:00
Andrew Tridgell 7e29761b99 Plane: try to smooth auto VTOL transitions 2016-01-19 11:05:56 +11:00
Andrew Tridgell 4adda34439 Plane: limit pitch to zero during airspeed wait VTOL mode 2016-01-19 11:05:56 +11:00
Lucas De Marchi 7f04e0106e waf: change binary names 
APMrover2 -> ardurover
AntennaTracker -> antennatracker
ArduCopter -> arducopter
ArduPlane -> arduplane
 2016-01-18 16:56:08 -02:00
Gustavo Jose de Sousa 17e5d99509 waf: allow partial builds with new mavlink as submodule 
The task generator for the mavlink headers is given a name 'mavlink' and is
added as a dependency to all local static libraries, because all of them use
sources that include mavlink headers. It would be nice to have a good way to
detect sources that use mavlink headers or to declare list of libraries that
use the headers, so that the dependency could be added automatically.

Additionally, there's a minor change in syntax for the task generator: using
strings directly instead of lists.
 2016-01-15 07:28:48 +11:00
Andrew Tridgell eabceb34e1 Plane: update release notes for Pixracer support 2016-01-10 17:43:01 +11:00
Andrew Tridgell 5a24e93cc5 Plane: removed debug code and add quadplane setup checks 2016-01-09 16:26:13 +11:00
Andrew Tridgell 9e3c1fddef Plane: updated release notes 2016-01-09 15:17:45 +11:00
Andrew Tridgell ebe1fe0b17 Plane: raise version to 3.5.0beta1 2016-01-09 13:33:27 +11:00
Tom Pittenger 7978872e32 AP_Plane: set path_propportion in TECS 2016-01-09 13:25:02 +11:00
Andrew Tridgell ee819959b6 Plane: smoother takeoff and land transition in VTOL auto 2016-01-09 11:33:43 +11:00
Andrew Tridgell 2679cb2c50 Plane: improve yaw and position control in takeoff and landing 
auto VTOL takeoff is always vertical. Yaw rate is zero on takeoff and
during VTOL descent
 2016-01-09 10:47:41 +11:00
Andrew Tridgell 0986474eed Plane: call set_frame_orientation() before Init for quad motors 2016-01-09 07:44:45 +11:00
Andrew Tridgell 52c4715c94 Plane: fixed init bug on low memory for quadplane 2016-01-09 07:38:55 +11:00
Andrew Tridgell 787a6994a4 Plane: added Q_THR_MID parameter 2016-01-09 07:38:55 +11:00
Andrew Tridgell 4da798129e Plane: fixed zero throttle in QSTABILISE mode 2016-01-09 07:38:55 +11:00
Andrew Tridgell cfb74406b6 Plane: fixed call to motors->Init() for quadplane 2016-01-09 07:38:55 +11:00
Andrew Tridgell 0a0e191284 Plane: init rc output after quadplane setup 
this ensures first PWM pulses are correct
 2016-01-09 07:38:55 +11:00
Andrew Tridgell 13a71c5cde Plane: use default motor mapping for channel setup 2016-01-09 07:38:55 +11:00
Andrew Tridgell b1177521ef Plane: show throttle level in vtol modes 2016-01-09 07:38:54 +11:00
Andrew Tridgell 71b0d5fb6d Plane: disable quad motors in TRAINING and ACRO too 2016-01-09 07:38:54 +11:00
Andrew Tridgell 9c5ec5e74b Plane: allow yaw control in auto-throttle VTOL modes 2016-01-09 07:38:54 +11:00
Andrew Tridgell 70018ee0cb Plane: fixed final descent for VTOL auto landing 2016-01-09 07:38:54 +11:00
Andrew Tridgell f259cf4b3f Plane: added Q_YAW_RATE_MAX parameter 2016-01-09 07:38:54 +11:00
Andrew Tridgell f5a15fb7c5 Plane: don't yaw quad when disarming 2016-01-09 07:38:54 +11:00
Andrew Tridgell ecd7d53cfc Plane: auto set trim on quad motor channels 
this prevents a reboot causing a motor start
 2016-01-09 07:38:54 +11:00
Andrew Tridgell 7010fd27ff Plane: fixed Q_THR_MAX_PWM parameter 2016-01-09 07:38:54 +11:00
Andrew Tridgell 780d1459f0 Plane: fixed force descend in VTOL land 2016-01-09 07:38:53 +11:00
Andrew Tridgell 4592085963 Plane: better VTOL land detection 2016-01-09 07:38:53 +11:00
Andrew Tridgell fdd86c10ba Plane: smoother transitions to auto from VTOL takeoff 2016-01-09 07:38:53 +11:00
Andrew Tridgell 418464ab8c Plane: added quadplane version of is_flying() 2016-01-09 07:38:53 +11:00
Andrew Tridgell f068a8c913 Plane: added support for VTOL_TAKEOFF and VTOL_LAND commands 2016-01-09 07:38:53 +11:00
Andrew Tridgell 5e784ddb5c Plane: consider flying status for throttle_wait 2016-01-09 07:38:53 +11:00
Andrew Tridgell 7afa2a493d Plane: implement VTOL flight stage 2016-01-09 07:38:53 +11:00
Andrew Tridgell aab98ff757 Plane: fixed quad yaw assistance during transition timer 2016-01-09 07:38:52 +11:00
Andrew Tridgell 9ae4c3ec99 Plane: mark Q_ENABLE parameter as an enable parameter 2016-01-09 07:38:52 +11:00
Andrew Tridgell 0d6b353bcb Plane: added quad assistance and auto support for quadplane 2016-01-09 07:38:52 +11:00
Andrew Tridgell 48e1a0641f Plane: added throttle wait to quadplane 2016-01-09 07:38:52 +11:00
Andrew Tridgell 2983576067 Plane: added QLOITER mode 
quadplane loiter
 2016-01-09 07:38:52 +11:00
Andrew Tridgell 00ca292160 Plane: improved quadplane transition 2016-01-09 07:38:52 +11:00
Andrew Tridgell ca85c332d6 Plane: separate QSTABILIZE and QHOVER modes 2016-01-09 07:38:52 +11:00
Andrew Tridgell 6468fc6d93 Plane: Initial implementation of quadplane 
adds "HOVER" mode
 2016-01-09 07:38:52 +11:00
Tom Pittenger 6cb20b679d Plane: add xtrack_error to DF log 2016-01-08 20:16:25 +11:00
Andrew Tridgell f201552f6d Plane: always call load_all 
this ensures defaults file works on first start after erase
 2016-01-07 09:32:57 +11:00
Tom Pittenger 607201a9b1 Plane: zero course error for straight bungee launch 
This fixes the behavior where it uses the heading when switched to AUTO instead of at launch causing a turn just after a bungee launch
 2016-01-05 11:20:14 +11:00
Andrew Tridgell 7b6d862316 Plane: support up to 14 rc inputs for all boards 2016-01-04 08:22:35 +11:00
Andrew Tridgell 72edfcd1f6 Plane: update for changed peak hold API 2016-01-02 09:58:32 +11:00
Tom Pittenger 7cde90553d Plane: new param CRASH_ACC_THRESH 
@Description: X-Axis deceleration threshold to notify the crash detector that there was a possible impact which helps disarm the motor quickly after a crash. This value should be much higher than normal negative x-axis forces during normal flight, check flight log files to determine the average IMU.x values for your aircraft and motor type. Higher value means less sensative (triggers on higher impact). For electric planes that don't vibrate much during fight a value of 25 is good (that's about 2.5G). For petrol/nitro planes you'll want a higher value. Set to 0 to disable the collision detector.
 2016-01-02 09:58:32 +11:00
Tom Pittenger 21205f8b41 Plane: improved crash detection logic and agility 
- inhibit crash detection warnings when disabled by param so now it can be completely disabled
- reset is_crashed when disabled by param
- fixed pre-takeoff detection bug by adding in_preLaunch_flight_stage() where we are actually in FLIGHT_NORMAL instead of FLIGHT_TAKEOFF during setup of bungee launches. This now detects if we're in that state
- simplified the use of been_auto_flying to check across all flight stages. before it was excluded to handle hand-launches which can now be detected with in_preLaunch_flight_stage()
- added impact detector timer to clamp is_flying a few seconds after an impact
- logging new impact detector as "STAT.Hit"
 2016-01-02 09:58:31 +11:00
Tom Pittenger 3b06260358 Plane: refactored interface 
- added guided mode handling
- now handles gracefully a manual mode changes during evasion
 2015-12-31 15:36:49 +11:00
Tom Pittenger 0bfe235d6b Plane: use abort landing logic with mavlink GO_AROUND cmd 
- also enabled use of CMD_DO_GO_AROUND altitude param
 2015-12-31 15:34:41 +11:00
Tom Pittenger d18c25a0f9 Plane: add item_reached_msg to GUIDED 2015-12-31 15:31:39 +11:00
pepevalbe 9743e32f70 Plane: added group parameter for AP_Notify library 2015-12-31 11:33:05 +09:00
Siddharth Bharat Purohit 78566bda36 Plane: wire up accel calibrator for plane 2015-12-29 10:46:35 -08:00
Andrew Tridgell 7a5808276e Plane: fixed two build warnings with clang 2015-12-29 18:52:00 +11:00
Lucas De Marchi a096703b06 Global: don't link with AP_Progmem 
AP_Progmem is not used anymore.
 2015-12-27 15:58:12 -02:00
Andrew Tridgell 513d5c17b9 Plane: allow for settable main loop rate 2015-12-27 14:57:19 +09:00
Andrew Tridgell 58d9b030ea Plane: update for Hz based AP_Scheduler 2015-12-27 14:57:08 +09:00
Don Gagne eab8a8679d ArduPlane: fix invalid Range meta data 2015-12-27 16:10:44 +11:00
Andre Kjellstrup 6f5387c48d ArduPlane: Camera options for better camera control 
All on one because they would not pass autotest if split up.
 2015-12-18 18:16:11 +11:00
Jonathan Challinger 05eb723429 Plane: reflect renamed function in AP_AHRS 2015-12-18 18:08:37 +11:00
Julien BERAUD 8e66ce6f27 Plane: Update optical flow declaration 
Pass ahrs as param
 2015-12-18 17:56:06 +11:00
Gustavo Jose de Sousa dc81a2410e waf: use single entry point for make wrappers 2015-12-10 10:40:34 +09:00
Michael du Breuil 4b40a884e9 Plane: Don't disable compass checks for HIL mode unless actually in hil mode 2015-12-08 05:07:46 -07:00
Tom Pittenger 113961b66e Plane: compiler warning - double promotion 2015-12-07 15:49:55 +09:00
DonLakeFlyer 7479bc5734 Plane: return success or failure of get home position 2015-12-07 12:33:23 +09:00
Lucas De Marchi 1308dd888f ArduPlane: remove unused AP_ADC_AnalogSource 2015-12-03 13:32:45 +11:00
Peter Barker 84b53e58d5 Plane: DataFlash-over-MAVLink support 2015-12-03 13:21:52 +11:00
Peter Barker 574f95bd76 Plane: support multiple simultaneous backends 2015-12-03 13:21:51 +11:00
Gustavo Jose de Sousa 7837bbfd81 waf: add a make wrappers 2015-12-03 07:54:32 +11:00
Gustavo Jose de Sousa 3100736c9f waf: add missing AP_ADSB library to ArduPlane 2015-12-03 07:54:32 +11:00
Lucas De Marchi 1cdc233bd2 waf: add missing AP_Parachute library to ArduPlane 2015-12-03 07:54:31 +11:00
Caio Marcelo de Oliveira Filho 6e7b73610d waf: add waf support 2015-12-03 07:54:30 +11:00
Lucas De Marchi 8eb0b559f2 ArduPlane: avoid comparison between signed and unsigned 2015-12-01 16:28:18 -02:00
Lucas De Marchi 2591261af6 Global: rename min and max macros to uppercase 
The problem with using min() and max() is that they conflict with some
C++ headers. Name the macros in uppercase instead. We may go case by
case later converting them to be typesafe.

Changes generated with:

	git ls-files '*.cpp' '*.h' -z | xargs -0 sed -i 's/\([^_[:alnum:]]\)max(/\1MAX(/g'
	git ls-files '*.cpp' '*.h' -z | xargs -0 sed -i 's/\([^_[:alnum:]]\)min(/\1MIN(/g'
 2015-12-01 16:28:09 -02:00
Tom Pittenger 4c1a70eb66 Plane: print start of land approach 2015-12-01 07:05:07 +11:00
Luis Vale Gonçalves 4722a388b9 Plane: Text revisions 
text revisions
 2015-11-27 18:54:30 +11:00
Luis Vale Gonçalves b7f3782e4e Plane: Text revisions 
text revisions
 2015-11-26 07:56:52 +11:00
Tom Pittenger eaad72c192 Plane: Add support for handing ADS-B traffic 
- parse MAVLINK_MSG_ADSB_VEHICLE msg
- new 1Hz adsb_update task to compare list against for threat detection
- perform object avoidance via loiter or loiter_and_descend. More methods are welcome!
 2015-11-23 19:45:40 +11:00
Tom Pittenger d8d1343735 Plane: include AP_ADSB library in build for Plane 2015-11-23 19:45:40 +11:00
Andre Kjellstrup db16b94e7f Plane: update RTL altitude param description 2015-11-21 12:44:34 +09:00
Caio Marcelo de Oliveira Filho c8888329e1 Plane: use millis/micros/panic functions 2015-11-20 12:26:40 +09:00
Andrew Tridgell 9108179322 Plane: fixed build for SITL changes 2015-11-16 17:57:36 +11:00
Andrew Tridgell 8f4ce7f20b build: removed all nocore.inoflag files 
these were APM2 specific
 2015-11-16 08:05:17 +11:00
lvale e18181e5c2 Plane: Uniformization of severities 
Plane uniformization of severities
 2015-11-09 09:38:25 +11:00
Tom Pittenger 5c3486d003 Plane: power-off rangefinder at high alt without terrain avail 
- moved terrain alt rangefinder power-off trigger from trerrain thread to rangefinder thread
- allow rangefinder to power-off using baro if terrain data not available
 2015-11-09 08:36:41 +11:00
Tom Pittenger 178bbb080b Plane: improve crosstrack error while navigating to loiter point 
There is no crosstrack concept in the loiter navigation so when going from waypoint to loiter you will not converge onto the line between those two points. This commit adds crosstracking by performing normal waypoint navigation until you get near it.
 2015-11-09 08:25:26 +11:00
Lucas De Marchi e5595ff11c ArduPlane: don't use avr include dir for tags 2015-11-04 12:14:16 +11:00
Lucas De Marchi 0151853c21 ArduPlane: remove check for MAVLINK_COMM_NUM_BUFFERS 2015-11-04 12:14:15 +11:00
Lucas De Marchi c55c07eaf6 ArduPlane: remove check for AVR CPUs 
Remove the checks for HAL_CPU_CLASS > HAL_CPU_CLASS_16 and
HAL_CPU_CLASS >= HAL_CPU_CLASS_75. Corresponding dead code will be
removed on separate commits.
 2015-11-04 12:14:15 +11:00
Lucas De Marchi d1be74c87e ArduPlane: remove checks for HAL_BOARD_APM2 and HAL_BOARD_APM1 2015-11-04 12:14:13 +11:00
Lucas De Marchi cfe6e209db ArduPlane: fix wrong printf format for printf 
"%S" is used for wide string, but we are passing a char*. Use lowercase
in this case to remove warnings like this:

libraries/AP_InertialSensor/AP_InertialSensor.cpp: In member function
'bool AP_InertialSensor::calibrate_accel(AP_InertialSensor_UserInteract*, float&, float&)':
libraries/AP_InertialSensor/AP_InertialSensor.cpp:620:61: warning:
format '%S' expects argument of type 'wchar_t*', but argument 3 has type 'const char*' [-Wformat=]
                 "Place vehicle %S and press any key.\n", msg);
                                                             ^
 2015-10-30 14:35:43 +09:00
Lucas De Marchi d40349d6ae ArduPlane: fix wrong printf format for 32 bits 
Heading is a 32 bits value, so use %d.
 2015-10-30 14:35:38 +09:00
Lucas De Marchi a6fd94c6fe ArduPlane: fix wrong printf format for 32 bits 
"micros() - before" doesn't return a long value. Use "%u".
 2015-10-30 14:35:35 +09:00
Lucas De Marchi 5244559010 Minimize AP_Progmem.h includes 
Most of AP_Progmem is already gone so we can stop including it in most
of the places. The only places that need it are the ones using
pgm_read_*() APIs.

In some cases the header needed to be added in the .cpp since it was
removed from the .h to reduce scope. In those cases the headers were
also reordered.
 2015-10-30 14:35:32 +09:00
Lucas De Marchi 1b07dabeb7 Replace prog_char and prog_char_t with char 
prog_char and prog_char_t are now the same as char on supported
platforms. So, just change all places that use them and prefer char
instead.

AVR-specific places were not changed.
 2015-10-30 14:35:30 +09:00
Lucas De Marchi 4ab9821624 Replace use of Log_Write_Message_P() with Log_Write_Message() 2015-10-30 14:35:28 +09:00
Lucas De Marchi 20c6ffc5e3 Replace use of UARTDriver::printf_P() with UARTDriver::printf() 
This also starts to show warnings on places that were already using
wrong printf format strings.
 2015-10-30 14:35:25 +09:00
Lucas De Marchi 6f4904189b Replace use of println_P() with println() 2015-10-30 14:35:22 +09:00
Lucas De Marchi a964ac38ec Replace use of print_P() with print() 2015-10-30 14:35:21 +09:00
Lucas De Marchi 89fc4f4b62 Replace use of send_text_P() with send_text() 2015-10-30 14:35:17 +09:00
Lucas De Marchi 831d8acca5 Remove use of PROGMEM 
Now variables don't have to be declared with PROGMEM anymore, so remove
them. This was automated with:

    git grep -l -z PROGMEM | xargs -0 sed -i 's/ PROGMEM / /g'
    git grep -l -z PROGMEM | xargs -0 sed -i 's/PROGMEM//g'

The 2 commands were done so we don't leave behind spurious spaces.

AVR-specific places were not changed.
 2015-10-30 14:35:16 +09:00
Lucas De Marchi 6f0db45b57 Replace use of strcasecmp_P() with strcasecmp() 2015-10-30 14:35:08 +09:00
Lucas De Marchi 84da1f5039 Rename gcs_send_text_P to gcs_send_text 2015-10-30 14:35:07 +09:00
Lucas De Marchi 84d5fb006f Remove use of Util::{v,}snprintf_P() 
These are now the same function as Util::snprintf().
 2015-10-30 14:35:05 +09:00
Lucas De Marchi 2c38e31c93 Remove use of PSTR 
The PSTR is already define as a NOP for all supported platforms. It's
only needed for AVR so here we remove all the uses throughout the
codebase.

This was automated with a simple python script so it also converts
places which spans to multiple lines, removing the matching parentheses.

AVR-specific places were not changed.
 2015-10-30 14:35:04 +09:00
Lucas De Marchi bd0f0a7536 ArduPlane: convert dos linefeeds to unix 2015-10-30 14:35:02 +09:00
Andrew Tridgell 3c3392aae5 Plane: improve error messages on failed parachute release 2015-10-27 16:06:34 +11:00
Andrew Tridgell 5d1d54a8cb Plane: added CHUTE_CHAN parameter for manual release 2015-10-27 16:06:34 +11:00
Andrew Tridgell d20b86b95e Plane: suppress the throttle in auto-throttle modes after parachute release 2015-10-27 16:06:34 +11:00
Andrew Tridgell 9affddcaa3 Plane: initial support for AP_Parachute library 2015-10-27 16:06:34 +11:00
Andrew Tridgell 3dd47adafe Plane: fixed a condition where takeoff switches to land 2015-10-24 15:15:59 +11:00
Andrew Tridgell 537f22cdd1 Plane: changed thresholds for LAND_APPROACH 
use 15% path progress when lined up, and 50% path progress if not
lined up
 2015-10-24 15:00:34 +11:00
Tom Pittenger f9fbb8a0f7 Plane: restrict land_approach stage change with tighter criteria 
- inhibit switching from FLIGHT_NORMAL to FLIGHT_LAND_APPROACH until we meet stricter criteria other than just that LAND is next waypoint
- requires: nav bearing error < 10deg && have traveled path forward 30% of path && are below top of approach in case we hit waypoint while still descending
- exceptions: traveled path forward > 80% which basically means we're getting close to the flare point and better get into approach mode ASAP
 2015-10-24 14:43:43 +11:00
Caio Marcelo de Oliveira Filho 62d4c05a8e ArduPlane: include SITL only for SITL board 
Include board-specific files only when the board is used. Since these
should be exceptional cases, let the includer handle the ifdef instead
of putting ifdefs in every platform-specific header.

In the future we should evaluate whether the HAL for the board should
instantiate this.
 2015-10-22 13:36:14 -02:00
Caio Marcelo de Oliveira Filho 49a42dc985 SITL: use a SITL namespace 2015-10-22 11:04:42 -02:00
Peter Barker 07842e211d Plane: use simple log entry numbers to download logs 2015-10-21 10:50:32 +11:00
Caio Marcelo de Oliveira Filho db3e501aec ArduPlane: implement HAL::Callbacks 
Also removes includes for each board since they are not necessary
anymore.
 2015-10-21 09:16:09 +11:00
Caio Marcelo de Oliveira Filho ec52df991c build: compile only the HAL files needed by the board 
Instead of requiring every program to specify the HAL related modules,
let the build system do it (in practice everything we compiled depended
on HAL anyway). This allow including only the necessary files in the
compilation.
 2015-10-21 09:16:07 +11:00
Caio Marcelo de Oliveira Filho 2e464a53c2 AP_HAL: make code not depend on concrete HAL implementations 
The switching between different AP_HAL was happening by giving different
definitions of AP_HAL_BOARD_DRIVER, and the programs would use it to
instantiate.

A program or library code would have to explicitly include (and depend)
on the concrete implementation of the HAL, even when using it only via
interface.

The proposed change move this dependency to be link time. There is a
AP_HAL::get_HAL() function that is used by the client code. Each
implementation of HAL provides its own definition of this function,
returning the appropriate concrete instance.

Since this replaces the job of AP_HAL_BOARD_DRIVER, the definition was
removed.

The static variables for PX4 and VRBRAIN were named differently to avoid
shadowing the extern symbol 'hal'.
 2015-10-21 09:16:07 +11:00
Randy Mackay 073828a764 Plane: add ahrs health pre-arm check 2015-10-16 13:50:59 +09:00
Gustavo Jose de Sousa 2cc07d2899 ArduPlane: use compass get_{field,offsets}() functions 
Both functions are equivalent, so we're going to simply use
get_{field,offsets}() instead of get_{field,offsets}_milligauss().
 2015-10-15 19:56:06 +09:00
Randy Mackay 17ed125e41 Plane: add no break comment to suppress compiler warning 2015-10-03 12:56:30 +09:00
Randy Mackay 32c5b0e63c Plane: support set_home_position message 2015-10-03 12:56:28 +09:00
Randy Mackay d54e28e129 Plane: send home position when home is set or get-home msg received 2015-10-03 12:56:27 +09:00
Andrew Tridgell 213bed99e1 Plane: use ahrs.send_ekf_status_report() 2015-09-29 10:59:19 +10:00