Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
43,321 Commits 70 Branches 507 Tags 662 MiB
Commit Graph

882 Commits

Author SHA1 Message Date
mirkix ee86418587 AP_HAL: change PocketPilot to final baro sensor 2018-05-04 08:00:49 +10:00
night-ghost 9f1e45509a support for Matek F405-CTR board, causes minor changes in I2C descriptor block 2018-04-26 07:51:06 +10:00
Andrew Tridgell 33a26ac0a8 AP_HAL: enable DEVO telemetry on F4Light 2018-04-24 10:44:28 +10:00
Alexander Malishev ca33ff04d9 ChibiOS: add support for omnibusf4pro board 2018-04-14 09:25:15 +10:00
Andrew Tridgell 943e433be6 AP_HAL: added device name for bmp280 for ChibiOS 2018-04-12 11:50:44 +10:00
night-ghost 677fc1875b HAL_F4Light: some modes disabled by default 2018-04-11 10:13:08 +10:00
Andrew Tridgell a7711ab9f7 AP_HAL: don't require GPIO defines for RCOU serial on ChibiOS 2018-04-09 15:32:04 +10:00
Andrew Tridgell 0bb2c4564d AP_HAL: make hal aware of oneshot125 
this separates oneshot and oneshot125 at the HAL layer, allowing the
HAL to properly handle the high timing resolution of oneshot125
(needed to use 125ns time steps, to get the full 1000 throttle steps)
 2018-04-07 09:10:29 +10:00
Andrew Tridgell dacbef2120 AP_HAL: added get_esc_scaling() API for rcout 2018-04-07 09:10:29 +10:00
Andrew Tridgell 85ae6f60a8 AP_HAL: added UART locking interface 
used to gain exclusive access to a UART. This is needed for the BLHeli
MSP protocol to prevent protocol corruption due to console writes
 2018-04-07 09:10:29 +10:00
Andrew Tridgell 69c623270c AP_HAL: added telem request to RCOutput 2018-04-07 09:10:29 +10:00
Andrew Tridgell 74bf83c39f AP_HAL: added check for RCOUT serial support 2018-04-07 09:10:29 +10:00
Andrew Tridgell 7d3cce98d0 AP_HAL: allow override of MS5611 name 
for fmuv4-beta
 2018-04-07 09:10:29 +10:00
Andrew Tridgell d2075b4b67 AP_HAL: added irq save/restore API to hal.scheduler 
these are used by RPM driver
 2018-04-07 09:10:29 +10:00
Andrew Tridgell dcfec21b46 AP_HAL: added support for serial output to ESCs 2018-04-07 09:10:29 +10:00
Andrew Tridgell e7dc304f4e AP_HAL: support DShot output modes 2018-04-07 09:10:29 +10:00
Alexey Bulatov 4d08ec8c85 AP_HAL: Edge: set storage directory to /edge/ardupilot 2018-04-04 09:29:16 +09:00
kozinalexey 5df2b1a3ac chibios hal config for F4BY 2018-03-24 06:39:09 +11:00
Peter Barker 6c7c916c78 AP_HAL: eliminate AP_HAL::Print and AP_HAL::Stream 
Just *way* too many layers involved here
 2018-03-23 08:12:38 +11:00
Pierre Kancir f66c83a59e AP_HAL: fix FALLTHROUGH 2018-03-21 08:24:56 +09:00
LinJieqiang c73e7f0cf3 add IST8310 compass sensors in AP_Compass.cpp 2018-03-09 11:25:35 -08:00
night-ghost 7fad79ca81 HAL_F4Light: fixed parameter's numbers for some boards 2018-03-09 11:15:12 -08:00
Andrew Tridgell af8476ae08 AP_HAL: added DPS280 and FBM320 defines 2018-03-05 10:27:09 +00:00
Andrew Tridgell 64bda71da5 AP_HAL: added generic ChibiOS board type 2018-03-02 12:52:50 +11:00
Andrew Tridgell 3c0e5a315f AP_HAL: started on OMNIBUSF7V2 support 2018-03-02 12:52:50 +11:00
Andrew Tridgell 2b0a3272fd AP_HAL: support LPS25H on MPU AUX 2018-03-02 12:52:50 +11:00
night-ghost b773334008 AP_HAL_F4Light: disable AP_Stats to reduce flash degradation 2018-03-02 07:23:35 +11:00
Andrew Tridgell 60b6f4c11d AP_HAL: added crazyflie2 2018-02-14 18:27:00 +11:00
Andrew Tridgell 310acd333e AP_HAL: use 1/0 not HIGH/LOW for LEDs in ChibiOS 2018-02-14 18:27:00 +11:00
Andrew Tridgell ceeb5e6892 AP_HAL: use 1/0 not HIGH/LOW for LED polarity 
this fixes the build for pixracerled driver on px4-v2
 2018-02-14 18:27:00 +11:00
ljwang 59ee3c8f62 AP_HAL: support mini-pix 2018-02-14 18:27:00 +11:00
Tom Pittenger a2f1f63ab3 AP_HAL: add param defaults for EMLID_EDGE for GPS_TYPE=9 and CAN_DRIVER=1 2018-02-13 15:29:53 +11:00
Alexey Bulatov 8369f125ce AP_HAL: Edge: add define HAL_WITH_UAVCAN 2018-02-13 13:52:44 +11:00
murata 7be15cab45 AP_HAL: disable copter winch on f4light boards 2018-02-12 12:17:12 +09:00
mirkix 3aa211b325 AP_HAL: fix BeagleBone Blue external I2C number 2018-02-12 09:49:56 +09:00
Andrew Tridgell d5be04dc8f AP_HAL: fixed AP_MODULE_SUPPORTED 2018-02-10 10:50:22 +11:00
night-ghost f8569ac39e AP_HAL: added F4Light HAL 2018-02-10 09:14:41 +11:00
Andrew Tridgell f8e16008f6 AP_HAL: updated cypress radio bus pins for skyviper 2018-02-08 18:56:51 +11:00
Andrew Tridgell 6bc3d126bb AP_HAL: added sensor defines for BMM150 and ICM20789 2018-02-08 17:36:33 +11:00
Peter Barker beb5a41389 AP_HAL: add radio defines for PixHawk 
This facilitates testing a diret-attached-radio using a PixHawk1

The AUX5 pin is used as an interrupt line.
 2018-02-08 17:36:33 +11:00
Andrew Tridgell bc96cb8a19 AP_HAL: fixed build warnings 2018-02-07 20:33:45 +11:00
Siddharth Purohit 5bcbc4c142 AP_HAL: default to not UAVCAN support for chibios boards 2018-02-07 20:33:45 +11:00
Siddharth Purohit d539a157b7 AP_HAL: move to having ICanDriver as member instead of inheriting it 
this is to support having drivers using libuavcan supplied helper objects, a method which can lead to much less duplication of code
 2018-02-07 20:33:45 +11:00
Andrew Tridgell 5da17e5b60 AP_HAL: added MINIPIX board type 2018-02-07 20:33:45 +11:00
Andrew Tridgell 472ba5bde7 AP_HAL: make _timer_tick() in Storage available in all HALs 
this makes using the Empty::Storage easier
 2018-02-07 20:33:45 +11:00
Andrew Tridgell 3e65347b97 AP_HAL: added REVOMINI board type 2018-02-07 20:33:45 +11:00
Andrew Tridgell 5179d13dbf AP_HAL: added virtual _timer_tick method on UARTDriver 
this is needed to allow HALs to update UARTs when the number of UARTs
they bhave varies (some may be instances of HAL_Empty)
 2018-02-07 20:33:45 +11:00
Igor Anokhin 5cf15db966 AP_HAL: add LSM9DS1 defines 
Add defines for name and number sensor
 2018-02-06 09:31:26 -08:00
LukeMike bfcece7edd VRBRAIN / AP_HAL: some update for new VR Brain 5.2E (EEPROM version) 2018-02-05 08:26:49 +11:00
LukeMike dab8f93628 VRBRAIN / AP_HAL: changed vrbrain board configuration file 2018-02-05 08:26:49 +11:00
night-ghost 2065cc879c AP_HAL: mAG3110 driver 2018-02-02 21:07:40 +11:00
Lucas De Marchi 184b017b33 AP_HAL: fix warning from having undefined HAL_WITH_IO_MCU 
In file included from ../../libraries/AP_IOMCU/AP_IOMCU.cpp:8:0:
../../libraries/AP_IOMCU/AP_IOMCU.h:10:5: warning: "HAL_WITH_IO_MCU" is not defined [-Wundef]
 #if HAL_WITH_IO_MCU
     ^
../../libraries/AP_IOMCU/AP_IOMCU.cpp:10:5: warning: "HAL_WITH_IO_MCU" is not defined [-Wundef]
 #if HAL_WITH_IO_MCU
     ^
And so on.
 2018-02-02 09:11:46 +09:00
Andrew Tridgell 93a993c575 AP_HAL: setup RTSCTS and SBUS_OUT 2018-01-20 17:40:07 +11:00
Andrew Tridgell d030f2888b AP_HAL: added multi-object push to RingBuffer 
this is much more efficient than pushing them one at a time
 2018-01-20 17:40:07 +11:00
Peter Barker 87be7fea0c AP_HAL: added support for Sparky2 STM23F405 board 2018-01-20 17:40:07 +11:00
Nikita Tomilov a50e6c6dd7 AP_HAL: board: linux: Add default CAN interface name 2018-01-17 07:24:17 -08:00
Alexey Bulatov 09de8e852d AP_HAL: Make methods get_UAVCAN and set_UAVCAN pure 2018-01-17 07:24:17 -08:00
Andrew Tridgell 3f5534eed5 AP_HAL: use calloc in preferance to malloc 2018-01-17 11:22:05 +11:00
Andrew Tridgell 4322ef7ca4 AP_HAL: prevent valgrind errors in EKF 
ensure that EKF memory is zero on start
 2018-01-17 11:22:05 +11:00
Andrew Tridgell d2c04aa649 AP_HAL: moved board defines to hwdef.dat 2018-01-15 11:46:02 +11:00
Andrew Tridgell 2773b17fad AP_HAL: added support for AP_Terrain for ChibiOS 2018-01-15 11:46:02 +11:00
Andrew Tridgell c80149123f AP_HAL: use hwdef.h for config options in chibios 2018-01-15 11:46:02 +11:00
Andrew Tridgell 8699b6233a AP_HAL: support MindPX-v2 2018-01-15 11:46:02 +11:00
Andrew Tridgell c7fd455f6a AP_HAL: added FMUv4 port for ChibiOS 2018-01-15 11:46:02 +11:00
bugobliterator 9d6ab78376 AP_HAL: add support for memory allocation by region type 2018-01-15 11:46:02 +11:00
Andrew Tridgell 8260b3f65f AP_HAL: allow bus speed and SMBUS enable on I2C 
this allows a driver to request a bus speed for a device, and whether
the device should be in SMBUS mode. It also allows a min timeout to be
specified, to allow for slow devices
 2018-01-15 11:46:02 +11:00
Andrew Tridgell 347c774665 AP_HAL: fixed example build on ChibiOS 2018-01-15 11:46:02 +11:00
Andrew Tridgell 391affc02d AP_HAL: support ChibiOS 2018-01-15 11:46:02 +11:00
mirkix 0e7ade6f0c AP_HAL: add new board PocketPilot 2017-12-27 16:01:55 +00:00
Mark Whitehorn 66c4b7d986 AP_HAL: support SBusOut 
rename enable_sbus_out to enable_px4io_sbus_out
 2017-11-30 10:20:04 +11:00
HeBin 895b5f34b8 AP_HAL: add Robsense PhenixPro Devkit Board support 2017-11-22 10:10:21 -08:00
Chinese66 700aaf2e8f AP_HAL: add delay to UART_test example 
For AC3.5 and higher version, serial uartA-USBconsole cannot work. Maybe the code before "setup" has been changed. Ensure that the uartA can be initialized
 2017-11-22 09:05:17 +09:00
Georgii Staroselskii 6326e23682 AP_HAL: Navio: add defs for BoardLED 2017-11-17 09:20:55 -08:00
alexshirley 065b00eb81 AP_HAL: Remove SBUS macro from ocpoc target 2017-11-01 10:28:40 -07:00
Lucas De Marchi 7fd10921c3 AP_HAL: Linux: add define for storage dir 
This mantains compatibility with what the boards were already using,
except for Aero and Minlure in which I'm changing it already as this is
desired.
 2017-10-30 16:57:37 -07:00
Lucas De Marchi 591b846e2d AP_HAL: switch aero and minlure to new log/terrain directory 
Additionally make Edge use the default.
 2017-10-30 16:57:37 -07:00
Lucas De Marchi d2ba8409d0 AP_HAL: provide default directory for Linux boards 
/var/lib/<project> is more in line to where projects save their data.
Also, remove APM from dir name as it should had been done some time
ago.

This is only the default (and recommended for any new board). Existing
boards that want to adopt the default can remove their defines.
 2017-10-30 16:57:37 -07:00
Georgii Staroselskii 4e2028c32f AP_HAL: Edge: enable Heat PWM 2017-10-20 13:03:08 -07:00
Georgii Staroselskii db9f427617 AP_HAL: Edge: add compass settings 
Use HMC5883L as default before UAVCAN Linux support is in place
 2017-10-20 13:03:08 -07:00
Georgii Staroselskii 2dd68243a2 AP_HAL: add Edge support 2017-10-20 13:03:08 -07:00
Francisco Ferreira be1f0801a3
AP_HAL: stop defining a default Lightware I2C bus 
When a specific bus isn't defined we now search I2C buses 0 and 1
 2017-10-09 11:57:02 +01:00
Lucas De Marchi 7edde571e1 AP_HAL: RCOutput_Tap: make LEDs blink on non-Aero ESCs 
The protocol defines bits for controlling possible LEDs. On Aero the ESC
firmware simply ignores these bits and blink with a fixed frequency.
Add logic to be able to blink the ESC if not flashed with the Aero
version of the firmware.
 2017-09-28 08:59:52 -07:00
Lucas De Marchi 2c3054cbae AP_HAL: RCOutput_Tap: remove feedback from ESCs 
This is not currently working on Aero, the only user of it right now,
and it has been commented out. Remove dead code.
 2017-09-28 08:59:52 -07:00
Lucas De Marchi d3a1ed9792 AP_HAL: RCOutput_Tap: fix comment with protocol bits 2017-09-28 08:59:52 -07:00
Lucas De Marchi 58ae139b8f AP_HAL: add possible external compasses for aero 2017-09-27 09:25:34 -07:00
Andrew Tridgell 08344557d9 AP_HAL: fixed missing LPS25H define 2017-09-27 16:42:31 +10:00
fnoop 149188de12 AP_HAL: Add size() method to RingBuffer ObjectArray 2017-09-22 09:56:00 -07:00
fnoop 3ddd9a6bca AP_HAL: RingBuffer: Prefix private members with underscore 2017-09-22 09:55:49 -07:00
Lucas De Marchi 68b3e5ccab AP_HAL: aero: define uart RCOutput_Tap 2017-09-21 07:59:20 -07:00
Lucas De Marchi 51665a2ea9 AP_HAL: RCOutput_Tap: split baudrate set for Linux and Nuttx 
On Linux (and in most of posix-like systems) the baudrate set in struct
termios via cfset[io]speed is actually the index of the standard
baudrates, it's not the baudrate per se (hence the use of B* macros).

On Linux it's possible to set the baudrate by passing the baudrate
itself to TCSETS2 ioctl.  Unfortunately it's not possible to include
asm/termbits.h and termios.h in the same compilation unit, so we need to
split it. Here we split into a Linux and a NuttX implementation.
 2017-09-21 07:59:20 -07:00
Lucas De Marchi 58a76adc13 AP_HAL: RCOutput_Tap: allow different device to be used 2017-09-21 07:59:20 -07:00
Lucas De Marchi f6b1099896 AP_HAL: move in tap esc implementation 
This can be shared with Linux.
 2017-09-21 07:59:20 -07:00
Peter Barker 68652867e1 AP_HAL: make in_main_thread public, pure and virtual 2017-09-19 09:40:11 +10:00
Lucas De Marchi 13f4ba7392 AP_HAL: remove raspilot 2017-09-12 15:06:19 -07:00
Francisco Ferreira 51a8aa3d1f AP_HAL: remove URUS 2017-09-11 10:04:11 -07:00
davidaroyer 8862e76284 AP_HAL: add support for Aerotenna OcPoC-Zynq hardware 2017-09-08 07:30:49 -07:00
Lucas De Marchi 2c72fc94ba AP_HAL: change aerofc baud to 921600 2017-09-01 07:55:47 -07:00
Lucas De Marchi 0e502d89a3 AP_HAL: use FALLTHROUGH define 
When falling through on a case switch, allow to add an empty statement
with the correct attribute to tell the compiler this behavior is
intended.
 2017-08-22 23:59:13 -07:00
Francisco Ferreira e0f4d3dbe5
AP_HAL: remove unused HAL_AIRSPEED_MS4515DO_I2C_BUS macro 2017-08-05 03:15:53 +01:00
Lucas De Marchi 5ea1784838 global: remove AP_HAL::in_timerprocess() 
This is not used and in the only places it would make sense would be
internally to the scheduler so remove it.
 2017-08-03 20:25:14 -07:00
Lucas De Marchi e98fe2d7d5 AP_HAL: RingBuffer: add missing include 2017-08-02 21:10:55 -07:00
Lucas De Marchi 61aed0f0d7 RingBuffer: example: integrate with build system 
It's only compatible with Linux so for now disable the other boards.
 2017-08-02 16:08:55 -07:00
Murilo Belluzzo 641671a366 AP_HAL: Add simple stress test for RingBuffer class 
It runs a Producer/Consumer thread pair endless reading and writing a
ByteBuffer. Producer writes a number sequence that is twice the
ByteBuffer size so a given position have a different data on each write
pass. Consumer makes sure that this pattern is not broken and aborts the
program if it is.

It is possible to spawn more pairs by informing a number as argument of
the program.
 2017-08-02 15:30:35 -07:00
Lucas De Marchi dbd074b250 AP_HAL: remove register_timer_process with extra arg 2017-08-02 08:00:53 -07:00
Andrew Tridgell 0188d6463d AP_HAL: added rcout set_detault_rate() 2017-07-24 14:07:28 +10:00
Kevin Lopez Alvarez fb6f368575 AP_HAL: initial FMUv4pro support 2017-07-24 13:45:37 +10:00
Siddharth Bharat Purohit 807ba9d520 HAL: use correct datatype for time conversion 2017-07-13 18:23:00 -07:00
Peter Barker c163915f6e AP_HAL: correct storage example 2017-07-07 16:18:37 +01:00
Eugene Shamaev 8f2306fd19 AP_HAL: support of several CAN managers (virtual drivers) 2017-07-03 11:44:32 +01:00
Andrew Tridgell 94b5a9c6f0 AP_HAL: added RSSI interface for RCInput 2017-07-03 11:22:21 +10:00
Andrew Tridgell 1c741e78e6 AP_HAL: changed BRUSHED16kHz to BRUSHED 2017-06-17 17:37:45 +10:00
Andrew Tridgell 6a01494d4a AP_HAL: fixed setting of HAL_MINIMIZE_FEATURES for FMUv3 2017-06-07 17:39:45 +10:00
Lucas De Marchi eb70dbc6f5 AP_HAL: add HAL_OS_POSIX_IO for aerofc-v1 
What aerofc-v1 doesn't have is an sdcard, but it has posix-like API as
it's running on top of NuttX.
 2017-06-06 18:42:17 -07:00
Lucas De Marchi 2e096d76c6 sparse-endian: avoid clash with linux/types.h 
On recent kernels (>= 4.10) __bitwise is defined on the header. Avoid
warning about redefining it.
 2017-06-02 11:26:02 -07:00
mirkix 478fb60a5b AP_HAL: BeagleBone Blue fix HMC5843 I2C bus number 2017-06-01 17:11:34 +01:00
Lucas De Marchi 915f10dc8a AP_HAL: SPIDevice: prefer nullptr for pointer 2017-04-19 01:36:58 -07:00
Vinicius Juvinski 203073e543 AP_HAL: add LEDs for BBBMini 
Use pins P8.9, P8.10 and P8.11
 2017-04-19 01:33:35 -07:00
hiro2233 1a8fa6ac5a AP_HAL:SPIDevice: Added functions for spi registered device. 2017-04-19 01:05:12 -07:00
Peter Barker 18d8f9ba9d AP_HAL: make get_custom_log_directory const 2017-04-19 00:11:49 -07:00
Pierre Kancir 34199b4af0 AP_HAL: example fix travis warning 
missing function declaration
implicit cast
some style fix
 2017-04-13 19:56:16 +01:00
Tom Pittenger 1e84e07edc AP_HAL: remove HAL_CPU_CLASS_16 2017-04-12 17:25:30 -07:00
Eugene Shamaev d1792689f1 AP_HAL/utility: clear added to RingBuffer 2017-04-10 21:31:07 +01:00
Eugene Shamaev a07033f938 AP_HAL: ESC scaling 2017-04-10 21:31:07 +01:00
Eugene Shamaev 9b98c304c4 AP_HAL: top level HAL definitions for CAN bus driver 2017-04-10 21:31:07 +01:00
Andrew Tridgell 7cd290af9b AP_HAL: added defaults offsets max for disco 2017-04-10 19:17:37 +10:00
Lucas De Marchi f91d23daab AP_HAL: add HAL_PX4_HAVE_PWM_INPUT 2017-03-24 12:06:19 +11:00
Lucas De Marchi 7ca9c7a443 AP_HAL: add HAL_HAVE_SAFETY_SWITCH 2017-03-24 12:06:19 +11:00
Lucas De Marchi d3e9f7ce66 AP_HAL: add HAL_PX4_HAVE_PX4IO 2017-03-24 12:06:19 +11:00
Lucas De Marchi 7f5b551050 AP_HAL: add HAL_PX4_HAVE_MTD_SUPPORT 2017-03-24 12:06:19 +11:00
Lucas De Marchi c7fc3ffbc4 AP_HAL: add HAL_HAVE_BOARD_VOLTAGE 2017-03-24 12:06:19 +11:00
Lucas De Marchi 37a050eed9 AP_HAL: add comments and allow for board overrides 2017-03-24 12:06:19 +11:00
Lucas De Marchi a682bb837a AP_SerialManager: uartA with 460800 baud for aerofc 2017-03-24 12:06:19 +11:00
Lucas De Marchi 20c5e9ec08 Add support for external mag on aerofc 2017-03-24 12:06:19 +11:00
Lucas De Marchi 00c2949dfb Add support for baro on aerofc 2017-03-24 12:06:19 +11:00
Lucas De Marchi b17acfee12 Add aerofc support 
Flight Controller board that comes on Intel Aero RTF Drone.
 2017-03-24 12:06:19 +11:00
mirkix 81da61a68d AP_HAL: BBBmini remove onboard OpticalFlow 2017-03-07 22:48:48 -08:00
Lucas De Marchi 686e0f08d6 AP_HAL: RCOutput: add optional timer_tick() method 
This is common enough across the HAL implementaions so add a method for
it to avoid the need for casts inside the HALs.
 2017-02-26 13:38:24 +11:00
Lucas De Marchi 8002df6e45 AP_HAL: add MPU6500 defines 2017-02-26 13:37:13 +11:00
Lucas De Marchi 0a381dfa1b AP_HAL: document method to split transfers 2017-02-23 22:38:15 -08:00
Andrew Tridgell dc26cbc074 AP_HAL: added set_split_transfers() API for I2C 2017-02-23 22:38:15 -08:00
Peter Barker 8f478a62d7 AP_HAL: remove HAL_PARAM_DEFAULTS_PATH for SITL 
This will remove the warning at startup that etc/defaults isn't
found, which just confuses matters when things aren't working
 2017-02-09 21:00:43 +11:00
Andrew Tridgell 2bb1043c23 AP_HAL: added HAL_MINIMIZE_FEATURES 
this is used to select a minimal build to save flash space on FMUv2
 2017-01-29 16:31:06 +11:00
murata 03bf57219b AP_HAL: Unify from print or println to printf. 2017-01-27 18:20:22 +11:00
Lucas De Marchi a73c1daa2e AP_HAL: Device: remove unused function to read registers 
Callers can use be16toh(), be32toh(), etc. There's no need to have a
special function here for each type.
 2017-01-26 23:18:27 -08:00
Lucas De Marchi 14519e90ff AP_HAL: Device: remove trailing whitespaces 2017-01-26 23:18:27 -08:00
mirkix 093407e8e8 AP_HAL: Add BeagleBone Blue 2017-01-26 23:15:52 -08:00
Julien Beraud c31522c2c3 AP_HAL_Linux: fix focal lengths calculation 
Fixed focal length on bebop due to wrong spec.
Fix comment that had a typo.
Fixed focal length calculations on other boards that were mislead
by the typo.
 2017-01-23 21:23:16 +11:00
Julien Beraud 4646428ac0 AP_HAL: remove ahrs cb from opticalflow 
Not needed anymore
 2017-01-23 21:23:16 +11:00
Julien Beraud 8a57e1a4a7 AP_HAL: Add methods for optical flow 
Add methods to push gyro and gyro biases to perform a good
optical flow
 2017-01-23 21:23:16 +11:00
Mathieu OTHACEHE bad1c879d9 AP_HAL: Bebop & Disco: move default param file path 
In future Bebop & Disco releases, no ardupilot binary nor default param file
will be provided.

So move HAL_PARAM_DEFAULTS_PATH to ardupilot folder in RW memory.
 2017-01-18 18:08:01 +00:00
Mathieu OTHACEHE fdb2a9c99b AP_HAL: Bebop & Disco: rename APM to ardupilot in paths 
Rename APM to ardupilot for Bebop and Disco's HAL_BOARD_LOG_DIRECTORY and
HAL_BOARD_TERRAIN_DIRECTORY.
 2017-01-18 18:08:01 +00:00
Pierre Kancir e627bbc912 AP_HAL: Board fix typo for baro BMP280_SPI 2017-01-17 17:33:37 +00:00
mirkix 4e06be38ac AP_HAL: Add Bosch BMP280 driver 2017-01-14 12:52:07 +11:00
Lucas De Marchi 5472bc4de1 Global: change Device::PeriodicCb signature 
Remove bool return as it's never being used and not supported on PX4.
 2017-01-14 10:03:54 +11:00
Andrew Tridgell 9b7f0f7957 AP_HAL: make new_input() API clearer in comments 2017-01-09 21:47:11 -08:00
murata 974d63a6b5 AP_HAL: Change the format of the return value of the method header. 2017-01-09 15:46:03 +00:00
Andrew Tridgell da45aef5c6 AP_HAL: fixed a logic bug in the srxl state machine 
when decoding invalid input the buflen could grow to beyond the buffer
size, overwriting the next block of memory. On Disco this ended up
overwriting the Perf::_instance variable, which led to a segmentation
fault
 2017-01-09 09:14:13 +11:00
Randy Mackay a2f6d7c102 AP_HAL: minor comment fix to Device.h 2016-12-24 13:55:31 +09:00
Andrew Tridgell 29bc07f410 AP_HAL: setup for building ucavcan on FMUv3 but not FMUv2 
save a lot of flash space on FMUv2
 2016-12-19 08:07:12 +11:00
Andrew Tridgell bd0a0510ed AP_HAL: define FMUv3 2016-12-19 08:07:11 +11:00
Lucas De Marchi b0ddf81687 Remove stdbool.h include for C++ sources 
This header is not needed in our C++ sources.
 2016-12-16 11:38:52 -08:00
Andrew Tridgell c657ad449b AP_HAL: added get_bus_address() 
used to report sensor probing results in drivers
 2016-12-05 16:51:49 -08:00
Andrew Tridgell 60c29417f1 AP_HAL: added uint16 access functions 2016-12-05 16:51:49 -08:00
mirkix 7e33ba04a9 AP_HAL: Add BBBmini PX4FLOW I2C bus number 2016-12-03 21:07:07 +11:00
Andrew Tridgell 28a318145c AP_HAL: move set_retries() up to Device class 
we really need set_retries() high during init for nearly all i2c
devices, and as many are written against the generic device class
moving it to the Device class makes this a lot easier. It is a NOP on
SPI.
 2016-12-02 09:47:51 +11:00
Andrew Tridgell fac8f1db03 AP_HAL: added MODE_PWM_BRUSHED16KHZ 2016-11-30 10:53:25 +11:00
Andrew Tridgell 00ccacb2ab AP_HAL: expose device bus number 2016-11-28 10:18:32 +11:00
Andrew Tridgell a96ed8c188 AP_HAL: added virtual destructor for Semaphores 2016-11-28 08:26:56 +11:00
Andrew Tridgell fdc94ec28a AP_HAL: fixed frequency init for register checking 2016-11-26 18:36:36 +11:00
Andrew Tridgell 954728c9e9 AP_HAL: added set_chip_select() API 
for devices with unusual timings
 2016-11-25 21:26:27 +11:00
Andrew Tridgell 7100272f14 AP_HAL: default to register checking every 10th call 
this saves having this in nearly all callers
 2016-11-25 20:31:36 +11:00
Andrew Tridgell e42bb20052 AP_HAL: added dma allocation routines to hal.util 2016-11-25 17:49:58 +11:00
Andrew Tridgell 5934a099a4 AP_HAL: added support for more SRXL varients 
based on work by Roman Seb <roman-29188@gmx.de>
 2016-11-24 22:54:23 +11:00
Andrew Tridgell 14a26bee6c AP_HAL: fixed ms5611 address on FMUv1 2016-11-13 16:21:05 +11:00
Andrew Tridgell bc614de4b3 AP_HAL: added checked registers interface 
allow drivers to easily monitor and correct critical registers
 2016-11-11 08:08:55 +11:00
Andrew Tridgell c565c9df35 AP_HAL: added ICM20608 external SPI name 2016-11-11 08:08:55 +11:00
Andrew Tridgell fd8955a737 AP_HAL: define default rotations for mpu6000 based boards 2016-11-09 17:08:14 +11:00
Andrew Tridgell d778ee2db0 AP_HAL: define device for icm20608 on ACCEL_MAG CS line on px4 
for PHMINI
 2016-11-09 17:08:12 +11:00
Andrew Tridgell ba9b475782 AP_HAL: added MS5611 on I2C for px4-v1 2016-11-09 17:08:11 +11:00
Andrew Tridgell ea74f8c12c AP_HAL: added ICM20608 INS name 2016-11-09 17:08:07 +11:00
Andrew Tridgell 38a1f51b53 AP_HAL: define rotations for the MPU9250 in board/linux.h 2016-11-09 17:08:07 +11:00
Andrew Tridgell 1990aa96e1 AP_HAL: added get_bus_id_devtype() 
used to do versioning on device types
 2016-11-09 17:08:06 +11:00
Andrew Tridgell 3d48b6bb3a AP_HAL: added device id tuples to Device class 
this allows a bus connection and device type tuple to be identifed as
a 24 bit number for use in user visible device IDs. Every bus
connection has a unique device ID.
 2016-11-09 17:08:04 +11:00
Andrew Tridgell 26ca2dd392 AP_HAL: added more px4 SPI device names 2016-11-09 17:08:03 +11:00
Andrew Tridgell a06137bb68 AP_HAL: define 9250 devices 2016-11-09 17:08:01 +11:00
Andrew Tridgell bf0b0c1773 AP_HAL: fixed HAL_SEMAPHORE_BLOCK_FOREVER to be zero 
all implementations assume this
 2016-11-09 17:07:57 +11:00
Andrew Tridgell b697c978e6 AP_HAL: fixed lsm303d SPI name 2016-11-09 17:07:57 +11:00
Andrew Tridgell e79b4f1c11 AP_HAL: added defines for ms5611 on other SPI buses 2016-11-09 17:07:57 +11:00
Andrew Tridgell 5db65cdb6d AP_HAL: added subtype for PX4 FMUv4 2016-11-09 17:07:57 +11:00
Andrew Tridgell 3927994905 AP_HAL: added SPI device names to px4 2016-11-09 17:07:56 +11:00
Andrew Tridgell 4d5562764a AP_HAL: provide default hmc5983 i2c bus address 2016-11-09 17:07:55 +11:00
Lucas De Marchi 7968736b1c AP_HAL: add O_CLOEXEC in places missing it 
By opening with O_CLOEXEC we make sure we don't leak the file descriptor
when we are exec'ing or calling out subprograms. Right now we currently
don't do it so there's no harm, but it's good practice in Linux to have
it.
 2016-11-07 12:37:30 -03:00
Lucas De Marchi 312a27dd20 AP_HAL: RCInput: rename deinit() to teardown() 2016-11-02 16:28:20 -02:00
murata c808ee2f49 Global: To nullptr from NULL. 
RC_Channel: To nullptr from NULL.

AC_Fence: To nullptr from NULL.

AC_Avoidance: To nullptr from NULL.

AC_PrecLand: To nullptr from NULL.

DataFlash: To nullptr from NULL.

SITL: To nullptr from NULL.

GCS_MAVLink: To nullptr from NULL.

DataFlash: To nullptr from NULL.

AP_Compass: To nullptr from NULL.

Global: To nullptr from NULL.

Global: To nullptr from NULL.
 2016-11-02 16:04:47 -02:00
hiro2233 3742c3b243 AP_HAL: Added subtype board URUS. 
This is a linux system based with Raspberry Pi B+, it's a automated
domotic system using APM framework.
 2016-10-27 11:51:31 -02:00
Lucas De Marchi 05a7eef1a2 RingBuffer: use explict "if" and return early 
Remove confusing use of ternary operator together with assign + load.
No change in behavior.
 2016-10-27 10:35:01 -03:00
Murilo Belluzzo 3f1896b9b7 RingBuffer: Remove 'old style' version 2016-10-27 14:24:10 +11:00
Murilo Belluzzo 8526b25654 RingBuffer: Add a faster method to read a single byte 2016-10-27 14:23:42 +11:00
Martin Evans 37b85fd3cd AP_HAL: Add Dark Linux board 2016-10-24 09:59:02 -02:00
Mathieu OTHACEHE 152edf7189 Global: remove mode line from headers 
Using a global .dir-locals.el file is a better alternative than
reincluding the same emacs header in every file of the project.
 2016-10-24 09:42:01 -02:00
Andrew Tridgell 8f88d7c784 AP_HAL: fixed comment on XPlus channels 
thanks for Francisco for noticing
 2016-10-17 06:49:40 +11:00
Andrew Tridgell 4d44591e62 AP_HAL: fixed decoding of XPlus channels 2016-10-16 19:05:19 +11:00
Andrew Tridgell ec8c22f26e AP_HAL: support up to 20 channels on SRXL 
tested with 18 channels on a DSM18 transmitter with a AR7700 receiver
with SRXL port
 2016-10-16 19:05:19 +11:00
Andrew Tridgell ece0a8721f AP_HAL: added standalone test program for dsm 
useful for debugging
 2016-10-16 19:05:19 +11:00
Andrew Tridgell 7b3d0234d1 AP_HAL: added an SRXL protocol decoder 
SRXL ports are commonly found on newer spektrum receivers like the AR7700
 2016-10-16 19:05:18 +11:00
murata ba60cce0c1 AP_HAL: simplify the processing of milliseconds from the time 2016-10-15 18:33:54 +09:00
Peter Barker e71c71fcac AP_HAL: correct casting of get_system_clock_ms 2016-10-14 18:41:56 +11:00
Andrew Tridgell e356797888 AP_HAL: make cork() mandatory in RCOutput 2016-10-13 10:00:04 +11:00
Lucas De Marchi ae53920e5b build: don't build examples with old build system 
We currently check examples are buildable with waf which doesn't need
the libraries to be specified in a make.inc file.  Having the makefiles
there is misleading since people try to build and realize the build is
broken.
 2016-10-11 13:03:08 +11:00
Andy Little 4b2eedac05 AP_HAL: Split the AP_HAL_Boards.h header into per board sub headers for legibility 2016-09-29 08:26:50 -03:00
Andrew Tridgell e7656fb7ac AP_HAL: raise compass offset max again for Disco 
values of 1600 happen on Z axis
 2016-09-23 10:52:55 +10:00
Andrew Tridgell 2edd914634 AP_HAL: added st24 R/C protocol decoder 
with thanks to the PX4 project
 2016-09-21 10:33:15 -03:00
Andrew Tridgell 9a7af89b30 AP_HAL: added sumd decoder 
with thanks to the PX4 project
 2016-09-21 10:33:15 -03:00
Matthew Brener 06388b0417 Global: Fix typos 2016-09-17 00:36:36 -03:00
Andrew Tridgell bf67d4277d AP_HAL: define a larger compass offset max for Disco 2016-09-14 11:52:55 +10:00
Benoit Tran 9b89b4f561 AP_HAL: Correct HAL_PARAM_DEFAULTS_PATH for Parrot Disco 2016-09-08 13:05:25 +10:00
Gustavo Jose de Sousa 5c5ddc9d4a AP_HAL: reformat AP_HAL_Boards.h 
The definitions for each board haven't been reformatted here. They need a
little more thinking on how to format them in order to provide better
readability.
 2016-09-03 01:03:17 -03:00
José Roberto de Souza 0b0be31a29 AP_HAL: add defines for Intel Aero 2016-09-03 01:03:07 -03:00
Lucas De Marchi e1ab44f4a3 Global: remove get_fd() from Device API 
This was there for compatibility with I2CDriver and SPIDriver. We don't
use them anymore so we can remove the compat method.
 2016-08-29 10:27:36 -03:00
Lucas De Marchi ead01855df AP_HAL: remove default params for minlure 
We are currently not using them.
 2016-08-29 10:27:36 -03:00
LukeMike 13e3150023 VRBRAIN / AP_HAL_Boards: definition of new board VR Brain 5.4 and VR Core 1.0 2016-08-07 20:31:51 +10:00
Murilo Belluzzo 077e03678f Global: Adapt Stream class to be used with Ringbuffer 2016-08-03 01:44:02 -03:00
Murilo Belluzzo b856d26087 RingBuffer: ::set_size now returns true or false 2016-08-03 01:44:02 -03:00
Murilo Belluzzo f7f203efa9 RingBuffer: Add ::clear() method to discard the buffer content 
The same could be achieved with ::set_size(::get_size()), but was not
obvious and hurts code readability.
 2016-08-03 01:44:02 -03:00
Murilo Belluzzo 75a1b102fb RingBuffer: Handle zero sized better 
Sometimes (like in DataFlash) the size of the ring buffer will be
determined in run time and the object can have size zero until proper
initialization. When this was the case, an underflow in ::get_size would
mess with the initializing algorithm.

Another issue was that the 'new' operator could fail what was not being
handled. Now, we only set the size member after we are sure 'new'
successfully allocated memory.
 2016-08-03 01:44:02 -03:00
Lucas De Marchi 052f30bc70 AP_HAL: remove macros to use MS5611 in the main thread 2016-07-30 00:55:28 -03:00
Lucas De Marchi 590539f674 AP_HAL_Linux: implement threaded I2C 2016-07-30 00:55:27 -03:00
Lucas De Marchi 37de995960 AP_HAL: update Device interface for periodic tasks 
Replace the previous not-implemented interface with a set of new methods
that can be resonably implemented:

    - register_periodic_callback() now receives a functor returning bool
      to easily allow "oneshot" timers

    - adjust_periodic_callback() allows the caller to change the timer
      for a specific handle. This way drivers like MS5611 can adjust the
      timer depending on its state machine: the time to sample
      temperature is smaller than the time to get a pressure sample

    - add unregister_callback(): since we have an opaque pointer, we
      can't tell the user to just delete it in order to unregister the
      callback
 2016-07-30 00:55:27 -03:00
Lucas De Marchi 57ec968b44 AP_HAL: remove SPIDriver 
SPIDevice now controls all accesses to SPI bus.
 2016-07-29 15:01:15 -03:00
Lucas De Marchi 3a5e8a17c7 AP_HAL: remove enum id for Ublox and RASPIO 2016-07-29 15:01:15 -03:00
Lucas De Marchi 01452bf922 AP_HAL: SPIDevice: add fullduplex method 
This method is needed when we want to transfer both tx and rx at the
same time, as opposed to common cases for sensors in which they are like
in the I2C interface: half-duplex.
 2016-07-29 15:01:14 -03:00
Lucas De Marchi 81345cc112 AP_HAL: Remove enum for Dataflash 2016-07-29 14:47:04 -03:00
Lucas De Marchi b21ad36676 AP_HAL: remove I2CDriver 2016-07-28 18:08:56 -03:00
hiro2233 4a6447575c AP_HAL: fixed and updated RCInput example. 2016-07-27 00:52:13 -03:00
Lucas De Marchi cb01280d77 AP_HAL: define bus for Lightware rangefinder 2016-07-26 00:52:54 -03:00
Lucas De Marchi cfb3124f2c AP_HAL_Linux: remove types for spi drivers 
Those drivers using SPIDevice interface don't need a global id for each
of them. Remove those that were already converted.
 2016-07-21 16:05:03 -03:00
Andrew Tridgell e407caaa41 AP_HAL: added support for Parrot Disco 2016-07-20 13:35:51 +10:00
Luiz Ywata d5449a6f20 AP_HAL: Add read method 
Provide a more intuitive api for reading an I2CDevice.
 2016-07-14 17:32:33 -03:00
Lucas De Marchi 08ea1ea263 AP_HAL_Linux: RCOutput_Bebop: follow coding style 
Minor changes to follow coding style and improve readability:

    - sort headers
    - move struct definition to compilation unit rather than header
    - Add braces to if, for, etc
 2016-07-14 17:32:33 -03:00
Luiz Ywata 7fb5db8077 AP_HAL_Linux: RCOutput_Bebop: use I2CDevice interface 2016-07-14 17:32:33 -03:00
Lucas De Marchi b9f65996bc AP_HAL: sparse-endian: unconditionally use byteswap.h 
This is either provided by a system header or a minimal header from
'missing' directory.
 2016-07-08 19:49:32 -03:00
Lucas De Marchi 40338c3272 AP_HAL: sparse-endian: use pragma once 2016-07-08 19:49:32 -03:00
Lucas De Marchi 6a80c3d70d AP_HAL: RingBuffer: remove trailing whitespaces 2016-07-08 16:44:26 -03:00
Lucas De Marchi 24c7f76034 AP_HAL: RingBuffer: remove C++11 initialization 
They are already initialized in the constructor.
 2016-07-08 16:44:09 -03:00
Murilo Belluzzo 3e1acdcbbf AP_HAL: Use atomic instead volatile on RingBuffer head/tail 
Volatile will provide protection to sequence re-ordering and guarantee
the variable is fetched from memory, but it won't provide the memory
barrier needed to ensure that no re-ordering (by either the compiler or
the CPU) will happen among other threads of execution
accessing the same variables.

For more info about this effect can be found on articles about
std::memory_order.
 2016-07-08 16:12:53 -03:00
Murilo Belluzzo b7dd4dad64 AP_HAL: Fix ByteBuffer::reserve() breaking buffer state 
When using reserved(), the reserved memory cannot be read before it's
written, therefore we cannot update 'tail' until the caller of
reserved() is done writing.

To solve that, a method called 'commit()' was added so the caller can
inform that is done with the memory usage and is safe to update 'tail'.
The caller also has to inform the length that was actually written.

This solution was developed to work considering the usage context of
this class: 1 reader and 1 writer **only**.
 2016-07-08 13:10:16 -03:00
Murilo Belluzzo 43d4012884 AP_HAL: Fix TOCTOU in ByteBuffer::peekiovec() 2016-07-08 13:10:16 -03:00
Murilo Belluzzo 9951b94d40 AP_HAL: Change the return type of 'peekiovec' 
Possible values are '0', '1' and '2' so uint8_t is a better fit. Also,
invert 'if' condition so it's clear that is returning 0, 1 or 2.
 2016-07-08 13:10:16 -03:00
Murilo Belluzzo 625f47def7 AP_HAL: Improve ByteBuffer::set_size 
So it doesn't delete and re-create the buffer if the size
happens to be the same. Still resets the buffer content.
 2016-07-08 13:10:16 -03:00
Murilo Belluzzo e9e31172c0 AP_HAL: Simplify ByteBuffer::readptr logic 2016-07-08 13:10:16 -03:00