Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
63,903 Commits 71 Branches 509 Tags 756 MiB
Commit Graph

1084 Commits

Author SHA1 Message Date
Sriram Sami 8bb052d019 AP_Motors: update descriptions for new parameters 2017-04-01 05:25:59 +11:00
Sriram Sami 1793bac8d4 AP_Motors: add parameters for HELI_DUAL 
- add COL2_MIN/MID/MAX parameters that control limits of rear swashplate
- output collective_mid correctly for rear swashplate when servo is in manual mode
 2017-04-01 05:25:59 +11:00
Andrew Tridgell 1ad5e1db4e AP_Motors: integrate AP_MotorsHeli_Dual 
fixed issues with combining with Heli_Single
 2017-03-25 16:22:10 +11:00
Fredrik Hedberg 998231ab0d AP_Motors: added AP_MotorsHeli_Dual 
for tandem and transverse helis
 2017-03-25 16:22:10 +11:00
Jacob Walser 507b461388 AP_Motors: Initialize throttle range directly 
This was causing SITL to hang at boot when motors object is statically allocated.
 2017-02-28 22:34:35 -08:00
Lucas De Marchi ade1876318 AP_Motors: tie esc scaling with set_throttle_range() 
We need to update the esc scaling from inside the Motors library, that
has access to the MOT_PWM_[MIN|MAX] values. Otherwise even though the
AP_Motors library honors the value for calculations, the RCOutput
drivers that need the scaling to set the real HW scaling will not work.
Right now it scales the value using the throttle_channel's min/max, even
though AP_Motors may be passing values in other range.
 2017-02-26 13:38:24 +11:00
Jacob Walser cde1452da3 AP_Motors: Use fabsf instead of fabs 2017-02-22 11:25:18 -08:00
Rustom Jehangir 237ba87ca4 AP_Motors: New AP_Motors6DOF used by Sub 2017-02-21 11:26:14 +11:00
Andrew Tridgell 83d055eceb AP_Motors: support twin-motor tailsitters 
use differential thrust for roll
 2017-02-18 17:26:43 +11:00
Andrew Tridgell ac2a9c4b4a AP_Motors: allow Copter to fly the tailsitter motors class 2017-02-18 17:26:43 +11:00
Andrew Tridgell 1a74b7fc0c AP_Motors: started on tailsitter support 2017-02-18 17:26:43 +11:00
Andrew Tridgell 108cbe1dab AP_Motors: mark tricopter yaw as tricopter only 2017-02-14 19:50:01 +11:00
Andrew Tridgell 2187417d74 AP_Motors: added MOT_SPOOL_TIME 
this allows for quadplanes to have faster spoolup, which can help with
transitions
 2017-02-14 09:23:17 +09:00
Randy Mackay 8b5aae37e0 AP_Motors: remove Hexa-H, change Octa-H factors 
Octa-H is like an Quad-X but with each side having two additional motors placed between the front an back motors.
Octa-H is quite different from Quad-H.
 2017-02-10 10:42:14 +09:00
Randy Mackay 872e0567be AP_Motors: add H frame support for hexa and octa 2017-02-09 12:37:14 +09:00
Randy Mackay a14265359f Copter: reduce default MOT_THST_HOVER to 0.35 2017-02-07 11:20:25 +09:00
Andrew Tridgell af44e9fdbd AP_Motors: added frame type 11 for Y6 to match FireFly6 
using same motor output mapping as AvA
 2017-02-06 16:18:58 +11:00
murata 92eb179acf AP_Motors: Unify from print or println to printf. 2017-01-27 18:20:22 +11:00
Andrew Tridgell a6ecb94d24 AP_Motors: MotorsTri does not need its own var_info now 2017-01-20 12:05:09 +11:00
Andrew Tridgell 8e3bf71aa9 AP_Motors: allow single, tri and coax to be part of multicopter class 2017-01-12 17:39:37 +11:00
Andrew Tridgell 8799094278 AP_Motors: use SRV_Channel for tri tail servo 2017-01-12 17:39:37 +11:00
Andrew Tridgell 638f1364be AP_Motors: adapt to new RC_Channel API 2017-01-12 17:39:37 +11:00
Randy Mackay bdfb12123f AP_Motors: fix frame-type enum for Y6B 
Also remove unused NEW_PLUS
 2016-12-31 10:55:23 +09:00
Randy Mackay 037e411e35 AP_Motors: fix example sketch 
Also minor formatting fix
Thanks to OXINARF for spotting this
 2016-12-31 10:55:23 +09:00
Randy Mackay ffa6d1a5b9 AP_Motors: init fixes for frame_class, type and initialised_ok 
Thanks to OXINARF for spotting these
 2016-12-31 10:55:23 +09:00
Randy Mackay a276f5dc90 AP_Motors: fix example sketch 2016-12-31 10:55:23 +09:00
Randy Mackay 7be0f437a9 AP_Motors: consolidate matrix multicopters 
AP_MOTORS_x_FRAME definitions moved to motor_frame_type enum
init function and now accepts frame-class and type to perform initial motor setup
set_frame_class_and_type allows real-time changing of motor setup
initialised_ok flag and accessor records whether setup was successful
 2016-12-31 10:55:23 +09:00
Randy Mackay 41189758b8 AP_Motors: move some functions to protected 
Also minor formatting fix
 2016-12-31 10:55:23 +09:00
priseborough 509709ce9d AP_Motors: remove unused EKF1 include 2016-12-19 08:07:11 +11:00
Randy Mackay 2da7ea746b MotorsHeli: minor formatting updates 2016-12-14 13:21:59 +09:00
Leonard Hall a09d4db4fd AP_MotorsMulticopter: fix battery resistance calculation 2016-12-14 11:07:29 +09:00
Pierre Kancir 8ef5067e12 AP_Motors: MotorsHeli_Single utilize an explicit type cast to avoid the loss of a fractional part. 2016-12-06 06:25:15 -08:00
Andrew Tridgell 8468add63e AP_Motors: mark PWM_TYPE as reboot required 2016-11-30 10:53:26 +11:00
Andrew Tridgell ce517384e1 AP_Motors: support MODE_PWM_BRUSHED16KHZ 2016-11-30 10:53:26 +11:00
Jonathan Challinger 22517422f9 AP_Motors: add option to disable motor PWM output while disarmed 2016-11-21 10:49:21 +09:00
Peter Barker 06b616f761 AP_Motors: add missing parameter metadata 2016-10-27 09:15:03 -07:00
Mathieu OTHACEHE 152edf7189 Global: remove mode line from headers 
Using a global .dir-locals.el file is a better alternative than
reincluding the same emacs header in every file of the project.
 2016-10-24 09:42:01 -02:00
Leonard Hall bead957a78 AP_MotorsMulticopter: limit hover throttle 2016-10-15 11:27:53 +09:00
Andrew Tridgell 7cd7f03d56 AP_Motors: fixed use of trim on heli servos 
this was broken by the servo range 0 to 1 changes
 2016-10-13 09:34:48 +11:00
Lucas De Marchi ae53920e5b build: don't build examples with old build system 
We currently check examples are buildable with waf which doesn't need
the libraries to be specified in a make.inc file.  Having the makefiles
there is misleading since people try to build and realize the build is
broken.
 2016-10-11 13:03:08 +11:00
Leonard Hall 0a56d69d54 AP_MotorsMulticopter: Use same throttle value used by motors 2016-10-10 16:40:08 +09:00
Randy Mackay b63666d188 AP_Motors: increase MOT_THST_HOVER parameter description range 
No functional change
 2016-09-07 15:28:49 +09:00
Randy Mackay 4858afae6c AP_Motors: param description update that MOT_SPIN_MIN should be higher than MOT_SPIN_ARM 2016-09-03 11:12:31 +09:00
Andrew Tridgell e9e3a3f491 AP_Motors: added get_pwm_type() 2016-08-29 15:52:21 +10:00
Andrew Tridgell 270fa95a8d AP_Morors: scale colyaw to match previous behaviour 
this was missed in the motor scaling changes. Thanks to Rob for
noticing this.
 2016-08-10 07:58:06 +10:00
Randy Mackay ad697243b3 AP_MotorsMulticopter: initialise some members 
This resolves some Covarity warnings at the cost of a small amount of flash
 2016-08-08 13:31:30 +09:00
Andrew Tridgell 66c4995c9d AP_Motors: added get_desired_spool_state() 2016-08-04 09:43:40 -07:00
Andrew Tridgell 11975223dd AP_Motors: added H_RSC_POWER_NEGC and H_RSC_SLEWRATE 
this gives more control over throttle for petrol
helis. H_RSC_POWER_NEGC allows for a asymmetric V-curve, which allows
for less power being put into the head when landing or when sitting on
the ground. That can lead to significantly less vibration and chance
of ground oscillation. A heli not being flown with aerobatics does not
need to use high throttle at negative collective pitch.

The H_RSC_SLEWRATE allows for a maximum throttle slew rate to be
set. Some petrol motors can cut if the throttle is moved too
quickly. We had this happen at a height of 6m when switching from
ALT_HOLD to STABILIZE mode. It also lowers the chance of the blades
skewing in their holders with the sudden change of power when the heli
is disarmed. In general it is a bad idea to do instantaneous large
movements of a IC engine throttle.
 2016-07-03 18:29:05 +10:00
Andrew Tridgell bc7488e2f2 AP_Motors: fixed typos 2016-07-01 15:35:29 +10:00
Leonard Hall fe68fe65e2 AP_Motors: Single and Coax fix flap gains 2016-07-01 12:45:14 +09:00
Leonard Hall ba2382c409 AP_MotorsCoax: Fix servo 3 and 4 feed through sign 2016-06-20 09:45:17 +09:00
Andrew Tridgell 7a9b4c7572 AP_Motors: fixed motor load calculation 
scale to 1.0 for max collective
 2016-06-19 13:50:04 +10:00
Randy Mackay e185bab775 AP_MotorsMulticopter: add HOVER_LEARN option to learn but not save 2016-06-18 11:55:49 +09:00
Randy Mackay 23f8227e36 AP_Motors: bug fix to save params on disarm 
Previously was saving during arming  as well as disarming.
Thanks to OXINARF for finding this!
 2016-06-18 11:55:49 +09:00
Randy Mackay a2ffd9ec7d AP_MotorsMulticopter: fix comment for get_throttle_limit function 2016-06-18 11:55:49 +09:00
Randy Mackay a1b573ed0a AP_Motors: rename throttle_ave_max to throttle_avg_max 2016-06-18 11:55:49 +09:00
Randy Mackay ef106e4b0f AP_Motors: spool_mode moved out of flags struction 
No functional change
 2016-06-18 11:55:49 +09:00
Leonard Hall 8fff32bde3 AP_MotorsSingle: fix stability patch use of throttle_hover 2016-06-18 11:55:49 +09:00
Leonard Hall e0f9fc8e40 AP_MotorsSingle: rename rpy_scale, thrust_min_rpy variables 
No functional change
 2016-06-18 11:55:49 +09:00
Leonard Hall da05902805 AP_MotorsCoax: fix stability patch use of throttle_hover 2016-06-18 11:55:49 +09:00
Leonard Hall 9bc866e771 AP_MotorsCoax: rename rpy_scale internal variable 
No functional change
 2016-06-18 11:55:49 +09:00
Leonard Hall 8bdb906b2b AP_MotorsCoax: fixes negative thrust 2016-06-18 11:55:49 +09:00
Randy Mackay 71d1818103 AP_MotorsMulticopter: minor comment update 2016-06-18 11:55:49 +09:00
Randy Mackay 818965fa57 AP_MotorsMulticopter: output_to_motors and output_logic become protected 2016-06-18 11:55:49 +09:00
Leonard Hall 02881b59ff AP_MotorsMulti: float constants 2016-06-18 11:55:49 +09:00
Randy Mackay 79a73a5c2f AP_Motors: fix example sketch 
No need to set throttle_mix nor throttle_min
 2016-06-18 11:55:49 +09:00
Leonard Hall bee6c29b89 AP_MotorsMulticopter: current limit keeps battery from sagging below BAT_VOLT_MIN 2016-06-18 11:55:49 +09:00
Leonard Hall be25ac4acf AP_MotorsMulticopter: Add current limit time constant variable 2016-06-18 11:55:49 +09:00
Leonard Hall 7e0e0ca874 AP_MotorsMulticopter: battery voltage compensation improvements 2016-06-18 11:55:49 +09:00
Leonard Hall 0ee7b00b0b AP_MotorsMulticopter: rename _thrust_curve_min to spin_min 2016-06-18 11:55:49 +09:00
Leonard Hall 142a67bb6d AP_MotorsMulticopter: minor comment change 2016-06-18 11:55:49 +09:00
Leonard Hall 5cace33ca5 AP_MotorsMulticopter: SPIN_MIN replaces min_throttle 2016-06-18 11:55:49 +09:00
Leonard Hall 2c811364d3 AP_MotorsMulticopter: SPIN_ARM param replaces SPIN_ARMED 2016-06-18 11:55:49 +09:00
Leonard Hall 488f90b39d AP_Motors: add calc_spin_up_to_pwm to reduce repeated code 2016-06-18 11:55:49 +09:00
Randy Mackay 25778a24e2 AP_MotorsMulticopter: add HOVER_LEARN param 2016-06-18 11:55:49 +09:00
Leonard Hall 4f0db2bc36 AP_Motors: learned THST_HOVER replace THR_MID 
This holds the estimated thrust required for the vehicle to hover
expressed as a number from 0 to 1.  0 will be equivalent to outputting
SPIN_MIN (which is a number from 0~1 but in the full output range) and 1 is equivalent to SPIN_MAX (also 0~1 but in the full output range)
 2016-06-18 11:55:49 +09:00
Leonard Hall 5a8fc6283e AP_Motors: replace throttle_rpy_mix with throttle_avg 
AC_AttitudeControl now calculates throttle vs attitude control
prioritisation and simply provides overall maximum throttle (aka
throttle_avg) to the motors library
 2016-06-18 11:55:49 +09:00
Andrew Tridgell 255bda9f9c AP_Motors: allow setting of loop rate 
this allows for SCHED_LOOP_RATE in copter
 2016-06-17 15:01:18 +10:00
Leonard Hall b3fcab8044 AP_Motors: minor comment fix 2016-06-09 09:49:00 +09:00
Andrew Tridgell f58d837026 AP_Motors: fixed heli RSC output range and float conversion 
adds H_RSC_PWM_MIN, H_RSC_PWM_MAX and H_RSC_PWM_REV
 2016-06-04 18:33:36 +10:00
Leonard Hall a16018f9fe AP_Motors: Missed Single fix 2016-05-31 12:44:17 +10:00
Leonard Hall d67f83559c AP_Motors: Single and Coax Fixes 2016-05-29 16:12:29 +10:00
Randy Mackay 72b86a3f99 AP_Motors: remove unused stabilizing flag 
Also initialise some members to resolve converity warnings
 2016-05-28 15:45:29 +09:00
Andrew Tridgell a2ed8fb313 AP_Motors: prevent negative thrust 
this prevents a sqrt of a negative number
 2016-05-26 17:09:11 +10:00
Andrew Tridgell 6855899cbf AP_Motors: fixed servo constructor for coax 2016-05-26 16:41:16 +10:00
Andrew Tridgell 4e5e301c4e AP_Motors: fixed servo constructor for heli 2016-05-26 16:41:06 +10:00
Andrew Tridgell f9fb098222 AP_Motors: fixed channel output for SingleCopter 2016-05-26 16:26:43 +10:00
Andrew Tridgell 65eb9ceb32 AP_Motors: expose min/max pwm 2016-05-26 14:33:57 +10:00
Andrew Tridgell a44b0e0011 AP_Motors: don't setup oneshot for a zero output mask 2016-05-26 12:18:49 +10:00
Fredrik Hedberg 75d5c87788 AP_Motors: Fix setpoint bug with 0~1 conversion in AP_MotorsHeli 2016-05-25 09:27:40 +09:00
Randy Mackay 8d1f50e78f AP_Motors: rename get_pwm_min to get_pwm_output_min 2016-05-24 10:00:25 +09:00
Randy Mackay 0c225cf498 AP_MotorsMulticopter: fix typo in comments 2016-05-24 10:00:25 +09:00
Randy Mackay ff93524ba4 AP_Motors: rename MOT_THST_MAX to MOT_SPIN_MAX 
Also renamed:
MOT_THST_BAT_MIN,MAX to MOT_BAT_VOLT_MIN,MAX
MOT_CURR_MAX to MOT_BAT_CURR_MAX
 2016-05-24 10:00:25 +09:00
Randy Mackay f1cbdbe914 AP_Motors: update some comments 2016-05-24 10:00:25 +09:00
Randy Mackay 49b14b3cb6 AP_Motors: add PWM_MIN, MAX 
These parameters allow the motor PWM output range to be different from receiver's throttle input range
Also renamed throttle_pass_through to set_throttle_passthrough_for_esc_calibration and change the method's input to the 0 to 1 range instead of direct PWM value
 2016-05-24 10:00:25 +09:00
Ricardo de Almeida Gonzaga 2802775e7d AP_Motors: Fix typos 2016-05-13 19:20:06 -03:00
Andrew Tridgell 60b3625950 AP_Motors: added hook for vehicle based thrust compensation 
allow vehicle code to compensate for thrust effectiveness changes due
to properties outside the scope of AP_Motors. This allows for
compensation in tiltrotors and tiltwings.
 2016-05-11 05:55:23 +10:00
Andrew Tridgell 37d6b5fdaf AP_Motors: added output_motor_mask() 
this will be used for tiltrotors in forward flight
 2016-05-11 05:55:23 +10:00
dgrat 41661f815f AP_Math: Replace the pythagorous* functions with a variadic template 
The new function can deal with a variable number of function parameters.
Additionally, I renamed the functions to norm(), because this is the
standard name used in several other projects.
 2016-05-10 11:41:26 -03:00
skyscraper de5130fa13 AP_Motors: RC_Channel refactor 
More fixing up of RC_Channel change access to
data members to functions
 2016-05-10 16:21:16 +10:00
skyscraper daec4ea10e AP_Motors: Fix up after RC_Channels refactor 
Further to refactor of RC_Channel class which included
adding get_xx set_xx methods, change reads and writes to the public members
to calls to  get and set functionsss

old public member(int16_t)   get function -> int16_t     set function (int16_t)
(expression where c is an object of type RC_Channel)
c.radio_in                     c.get_radio_in()           c.set_radio_in(v)
c.control_in                   c.get_control_in()         c.set_control_in(v)
c.servo_out                    c.get_servo_out()          c.set_servo_out(v)
c.pwm_out                      c.get_pwm_out()            // use existing
c.radio_out                    c.get_radio_out()          c.set_radio_out(v)
c.radio_max                    c.get_radio_max()          c.set_radio_max(v)
c.radio_min                    c.get_radio_min()          c.set_radio_min(v)
c.radio_trim                   c.get_radio_trim()         c.set_radio_trim(v);

c.min_max_configured() // return true if min and max are configured

Because data members of RC_Channels are now private and so cannot be written directly
 some overloads are provided in the Plane classes to provide the old functionality

new overload Plane::stick_mix_channel(RC_Channel *channel)
which forwards to the previously existing
void stick_mix_channel(RC_Channel *channel, int16_t &servo_out);

new overload Plane::channel_output_mixer(Rc_Channel* , RC_Channel*)const
which forwards to
(uint8_t mixing_type, int16_t & chan1, int16_t & chan2)const;

Rename functions

 RC_Channel_aux::set_radio_trim(Aux_servo_function_t function)
    to RC_Channel_aux::set_trim_to_radio_in_for(Aux_servo_function_t function)

 RC_Channel_aux::set_servo_out(Aux_servo_function_t function, int16_t value)
    to RC_Channel_aux::set_servo_out_for(Aux_servo_function_t function, int16_t value)

 Rationale:

        RC_Channel is a complicated class, which combines
        several functionalities dealing with stick inputs
        in pwm and logical units, logical and actual actuator
        outputs, unit conversion etc, etc
        The intent of this PR is to clarify existing use of
        the class. At the basic level it should now be possible
        to grep all places where private variable is set by
        searching for the set_xx function.

        (The wider purpose is to provide a more generic and
        logically simpler method of output mixing. This is a small step)
 2016-05-10 16:21:15 +10:00
Randy Mackay e41f798ba1 AP_Motors: remove unused set_stabilizing 2016-05-07 10:08:36 +09:00
Andrew Tridgell ff96085bd3 AP_Motors: allow arbitrary motor mapping with tricopters 2016-04-28 22:36:41 +10:00
Randy Mackay 7af9892bd1 AP_MotorsMatrix: make const a float 
resolves compiler warning
 2016-04-23 23:06:25 -07:00
Randy Mackay 72a7f674ec AP_Motors: protect against out-of-bounds memory access 
resolves a compiler warning
 2016-04-23 21:06:18 +10:00
Andrew Tridgell fd7c87e629 AP_Motors: allow enabling oneshot on a subset of motors 2016-04-22 13:24:04 +10:00
Andrew Tridgell f2c63e24c5 AP_Motors: allow tricopter motor 7 to be moved to any output 2016-04-22 08:32:03 +10:00
Andrew Tridgell 6df4d11d3f AP_Motors: ensure OneShot125 is within 125 to 250usec 2016-04-16 18:52:12 +10:00
Andrew Tridgell fe2065cd72 AP_Motors: rename MOT_PWM_MODE to MOT_PWM_TYPE 
Randy prefers TYPE
 2016-04-14 08:05:07 +10:00
Andrew Tridgell f54bcc6c7f AP_Motors: added oneshot support via MOT_PWM_MODE 
MOT_PWM_MODE=0 is normal
MOT_PWM_MODE=1 is oneshot
MOT_PWM_MODE=2 is oneshot125
 2016-04-14 08:05:05 +10:00
Randy Mackay 8d77bdec15 AP_MotorsMulti: minor comment fix 2016-04-14 05:45:24 +09:00
Randy Mackay f6eabfdab2 AP_MotorsMulticopter: formatting fixes 2016-04-01 11:59:30 +09:00
Randy Mackay 6807b961e2 AP_MotorsMulticopter: protect against div-by-zero if MOT_SPIN_ARMED is zero 2016-04-01 11:59:30 +09:00
Randy Mackay b39798ad90 AP_Motors: remove unused DESIRED_SPIN_MIN_THROTTLE 2016-04-01 11:59:30 +09:00
Randy Mackay dc86e1472c AP_MotorsTri: protect against div-by-zero if MOT_YAW_SV_ANGLE param was set to 90 2016-04-01 11:59:30 +09:00
Randy Mackay 9b5b6f3779 AP_MotorsHeli: constrain filtered throttle 
This is required because we have removed the constraint on the throttle input.  This also insures that there is no lag caused by the filtered throttle straying far outside the 0 to 1 range
 2016-04-01 11:59:30 +09:00
Randy Mackay b4a61e6ccf AP_Motors: remove constrain on throttle input 
This constraint is redundant because we already constrain the filtered throttle
 2016-04-01 11:59:30 +09:00
Leonard Hall fce426409e AP_MotorsTri: fix stab patch 2016-04-01 11:59:30 +09:00
Randy Mackay 49562c5ca3 AP_MotorsMulticopter: reduce num bits used for spool-up-down-mode 2016-04-01 11:59:30 +09:00
Randy Mackay 3ee88fd8c7 AP_MotorsCoax: remove output_min 
This is now implemented by parent AP_MotorsMulticopter
 2016-04-01 11:59:30 +09:00
Randy Mackay 8566a61660 AP_MotorsSingle: remove output_min 
This is now implemented by parent AP_MotorsMulticopter
 2016-04-01 11:59:30 +09:00
Randy Mackay 8621774040 AP_MotorsTri: remove output_min 
This is now implemented by parent AP_MotorsMulticopter
 2016-04-01 11:59:30 +09:00
Randy Mackay f4d94806e5 AP_MotorsMatrix: remove output_min 
This is now implemented by parent AP_MotorsMulticopter
 2016-04-01 11:59:30 +09:00
Randy Mackay b4b33db79b AP_MotorsMulticopter: promote output_min from Matrix class 2016-04-01 11:59:30 +09:00
Randy Mackay 2e8acf1f74 AP_MotorsHeli: calculate_scalars made protected 
No functional change
 2016-04-01 11:59:30 +09:00
Randy Mackay bc1b8f415a AP_Motors: example sketch output limit flags 2016-04-01 11:59:30 +09:00
Randy Mackay c9055ccdb1 AP_Motors: example sketch tests Single and Coax 2016-04-01 11:59:30 +09:00
Randy Mackay 41c55ffbe7 AP_MotorsTri: use YAW_SV_REV to reverse yaw output 2016-04-01 11:59:30 +09:00
Leonard Hall 13d727c2c6 AP_MotorsTri: add YAW_SV_ANGLE parameter to capture yaw servo lean angle max 2016-04-01 11:59:30 +09:00
Randy Mackay c939cc1551 AP_MotorsTri: clarify YAW_SV parameter descriptions and comments 2016-04-01 11:59:30 +09:00
Leonard Hall 267513d864 AP_MotorsTri: fixes to output_armed_stabilizing 
Also minor comment fixes
 2016-04-01 11:59:30 +09:00
Leonard Hall 250a444e57 AP_MotorsCoax: fixes to stab patch 
Fix throttle_lower flag
Also some formatting changes
 2016-04-01 11:59:30 +09:00
Randy Mackay 20565580ed AP_MotorsCoax: remove disabling of output ch7 2016-04-01 11:59:30 +09:00
Randy Mackay 63fefae7cf AP_MotorsCoax: use calc_pwm_output_1ot1 instead of local calc_pivot_radio_output 2016-04-01 11:59:30 +09:00
Leonard Hall 840e60c930 AP_MotorsSingle: fixes to stab patch 
Fixes throttle_lower flag
Also some formatting changes
 2016-04-01 11:59:30 +09:00
Randy Mackay af9b18329c AP_MotorsSingle: use calc_pwm_output_1to1 instead of local calc_pivot_radio_output 2016-04-01 11:59:30 +09:00
Randy Mackay c4b88aafef AP_MotorsHeli: swash and tail servo objects moved into class 2016-04-01 11:59:30 +09:00
Randy Mackay 4f1e62d551 AP_MotorsHeli: remove reset_radio_passthrough 2016-04-01 11:59:30 +09:00
Randy Mackay b5593431bf AP_MotorsHeli_Single: replace collective_mid_pwm with collective_mid_pct 2016-04-01 11:59:30 +09:00
Randy Mackay 9790245bf1 AP_MotorsHeli: replace collective_mid_pwm with collective_mid_pct 2016-04-01 11:59:30 +09:00
Randy Mackay a39bbc5421 AP_MotorsHeli: servo_test in range -1 to 1 2016-04-01 11:59:30 +09:00
Randy Mackay a42706bdcc AP_Motors: remove unused example sketch to test timing 
This test was only important on the slower AVR boards
 2016-04-01 11:59:30 +09:00
Randy Mackay a3450b712c AP_Motors: fix example sketch 2016-04-01 11:59:30 +09:00
Leonard Hall 753b72b28c AP_MotorsY6: call normalise_rpy_factors in motor setup 2016-04-01 11:59:30 +09:00
Leonard Hall 13ab3ecfea AP_MotorsQuad: call normalise_rpy_factors in motor setup 2016-04-01 11:59:30 +09:00
Leonard Hall 7ac4fc5569 AP_MotorsOctaQuad: call normalise_rpy_factors in motor setup 2016-04-01 11:59:30 +09:00
Leonard Hall e182c10625 AP_MotorsOcta: call noramlise_rpy_factors in motor setup 2016-04-01 11:59:30 +09:00
Leonard Hall 733b89cf3c AP_MotorsHexa: call noramlise_rpy_factors in motor setup 2016-04-01 11:59:30 +09:00
Leonard Hall 8f8eb7e214 AP_MotorsMatrix: add normalise_rpy_factors 2016-04-01 11:59:30 +09:00
Randy Mackay e7ba5ae451 AP_MotorsMulticopter: fix get_hover_throttle_as_high_end_pct 2016-04-01 11:59:30 +09:00
Randy Mackay 4514e8d100 AP_MotorsHeli: remove slow_start 2016-04-01 11:59:30 +09:00
Randy Mackay c41a5dc3bd AP_MotorsMulticopter: remove slow_start 
This has been replaced with the spool logic feature
 2016-04-01 11:59:30 +09:00
Randy Mackay b436dde60c AP_Motors: remove slow_start 
This has been replaced with the spool logic feature
 2016-04-01 11:59:30 +09:00
Randy Mackay e863f0b9c0 AP_MotorsHeli: use AP_Motors set_radio_passthrough in 0 to 1 range 2016-04-01 11:59:30 +09:00
Randy Mackay 68a6408a23 AP_MotorsMulticopter: remove set_radio_passthrough 
This has been moved up to the AP_Motors class
 2016-04-01 11:59:30 +09:00
Randy Mackay 5ba3a6c536 AP_Motors: add set_radio_passthrough 2016-04-01 11:59:30 +09:00
Randy Mackay fe4733121d AP_MotorsHeli_Single: ext_gyro_gain in 0 to 1 range 2016-04-01 11:59:30 +09:00
Randy Mackay e1e4e37c92 AP_MotorsHeli_Single: use RSC class's get_idle_output function 
No functional change
 2016-04-01 11:59:30 +09:00
Randy Mackay 2cdc5da226 AP_MotorsHeli_Single: rotor speed functions in 0 to 1 range 2016-04-01 11:59:30 +09:00
Randy Mackay 68945df45d AP_MotorsHeli_Single: write_aux uses 0 to 1 range 2016-04-01 11:59:30 +09:00
Randy Mackay b3334c3ae5 AP_MotorsHeli: rotor speed function in 0 to 1 range 2016-04-01 11:59:30 +09:00
Randy Mackay 832a226f13 AP_MotorsHeli_RSC: rotor speeds in 0 to 1 range 
Also move recalc_scalers functionality into update_rotor_ramp and update_rotor_runup
 2016-04-01 11:59:30 +09:00
Randy Mackay 4775843e3c AP_MotorsHeli_RSC: add get_idle_output accessor 2016-04-01 11:59:30 +09:00
Randy Mackay a63dba5b13 AP_MotorsHeli_Single: servo_test becomes protected 2016-04-01 11:59:30 +09:00
Randy Mackay cefd114964 AP_MotorsHeli_Single: remove unused accessors for tail_type, ext_gyro_gain, phase_angle 2016-04-01 11:59:30 +09:00
Randy Mackay f2fc39943e AP_MotorsHeli_Single: remove unused delta_phase_angle 2016-04-01 11:59:30 +09:00
Randy Mackay 381f538aca AP_HotorsHeli_Single: remove unused definition 2016-04-01 11:59:30 +09:00
Randy Mackay 27fed39671 AP_MotorsHeli_Single: remove roll_scalar, pitch_scalar 2016-04-01 11:59:30 +09:00
Randy Mackay 756236af35 AP_MotorsHeli: remove unused delta_phase_angle 2016-04-01 11:59:30 +09:00
Randy Mackay 16ac92be82 AP_MotorsHeli: remove unused definitions 2016-04-01 11:59:30 +09:00
Randy Mackay aeef6692cb AP_MotorsHeli: remove unused roll_scalar, pitch_scalar, collective_range 2016-04-01 11:59:30 +09:00
Randy Mackay 1a690772e1 AP_Motors: example sketch outputs headers 2016-04-01 11:59:30 +09:00
Randy Mackay 361b64f817 AP_Motors: example sketch uses AP_Motors set_desired_spool_state 2016-04-01 11:59:30 +09:00
Randy Mackay d4998089c8 AP_Motors: example sketch provides roll, pitch, yaw in -1 to +1 range 2016-04-01 11:59:30 +09:00
Randy Mackay 93597d152f AP_Motors: example sketch can test helicopter 2016-04-01 11:59:30 +09:00
Randy Mackay 47873c1d34 AP_MotorsHeli: fix RSC_SETPOINT param description 2016-04-01 11:59:30 +09:00
Randy Mackay bcbe6b279e AP_MotorsHeli: explicitely set ServoControlModes enum 
Non functional change but this enum is tied to a parameter value so the exact value is important
 2016-04-01 11:59:30 +09:00
Randy Mackay 8febcedf4b AP_MotorsHeli: remove unnecessary static declaration 2016-04-01 11:59:30 +09:00
Randy Mackay f022e504b0 AP_MotorsHeli: remove unused get_collective_mid and out methods 2016-04-01 11:59:30 +09:00
Randy Mackay a18722a2fc AP_MotorsHeli: output_min uses new move_actuators in -1 to +1 range 2016-04-01 11:59:30 +09:00
Randy Mackay 1197a439af AP_MotorsHeli: move_actuators to -1 to +1 range 2016-04-01 11:59:30 +09:00
Randy Mackay 8057d2fc58 AP_MotorsMatrix: remove unnecessary virtual declarations 2016-04-01 11:59:30 +09:00
Randy Mackay 71866be652 AP_MotorsHeliSingle: move_yaw in -1 to +1 range 2016-04-01 11:59:30 +09:00
Randy Mackay f6120b801b AP_MotorsHeliSingle: move_actuators in -1 to +1 range 2016-04-01 11:59:30 +09:00
Randy Mackay 61cf8e1698 AP_Motors: add calc_pwm_output_1to1 and 0to1 
Convenience functions to convert from -1 to +1 input to pwm output
 2016-04-01 11:59:30 +09:00
Randy Mackay 56f05e6a96 AP_Motors: add set_desired_spool_state 2016-04-01 11:59:30 +09:00
Randy Mackay 2716126e40 AP_MotorsMulticopter: use desired_spool from AP_Motors class 2016-04-01 11:59:30 +09:00
Randy Mackay 93d1f1969c AP_MotorsMulticopter: remove set_desired_spool_state 
This is being moved to AP_Motors
 2016-04-01 11:59:30 +09:00
Randy Mackay 4dd4d38b9b AP_MotorsMulticopter: fix output_to_motors definition 2016-04-01 11:59:30 +09:00
Randy Mackay 3ae9b606ff AP_Motors: remove unnecessary output_to_motors declaration 
This is declared down in the AP_MotorsMulticopter
 2016-04-01 11:59:30 +09:00
Randy Mackay f2ff9e34ad AP_Motors: remove output_armed_zero_throttle 2016-04-01 11:59:30 +09:00
Leonard Hall 879e12ba43 AP_MotorsHeli_Single: roll, pitch, yaw input in -1 to +1 range 2016-04-01 11:59:30 +09:00
Leonard Hall 97f0b00e3e AP_MotorsHeli: roll, pitch, yaw input in -1 to +1 range 2016-04-01 11:59:30 +09:00
Leonard Hall b701c109cf AP_MotorsSingle: roll, pitch, yaw input in -1 to +1 range 2016-04-01 11:59:30 +09:00
Leonard Hall 1a308c2eb8 AP_MotorsCoax: roll, pitch, yaw input in -1 to +1 range 2016-04-01 11:59:30 +09:00
Leonard Hall 4d208fcd47 AP_MotorsTri: roll, pitch, yaw input in -1 to +1 range 2016-04-01 11:59:30 +09:00
Leonard Hall 027284fba0 AP_MotorsMatrix: roll, pitch, yaw input in -1 to +1 range 2016-04-01 11:59:30 +09:00
Leonard Hall ae4e495698 AP_Motors: roll, pitch, yaw input in -1 to +1 range 2016-04-01 11:59:30 +09:00
Leonard Hall 90b3d7ca39 AP_Motors: example sketch tests stab patch more thoroughly 2016-04-01 11:59:30 +09:00
Leonard Hall cef3f42df5 AP_Motors: fix example make.inc 2016-04-01 11:59:30 +09:00
Leonard Hall d2a1cdf906 MotorsHeli: replace throttle_control_input with throttle_in 
throttle_control_input was 0 to 1000 range, throttle_in is 0 to 1
 2016-04-01 11:59:30 +09:00
Leonard Hall f02e8f8e01 AP_MotorsHeli: remove output_armed_not_stabilizing 2016-04-01 11:59:30 +09:00
Leonard Hall 5cd4b78918 AP_MotorsSingle: remove reverse parameters 
No longer necessary because we can use individual servo reverse params
 2016-04-01 11:59:30 +09:00
Leonard Hall 6264159f4d AP_MotorsSingle: move servo objects into Single class 2016-04-01 11:59:30 +09:00
Leonard Hall 21d304b86d AP_MotorsSingle: output_to_motors implements spool logic 2016-04-01 11:59:30 +09:00
Leonard Hall 24a100e429 AP_MotorsSingle: stability patch uses 0 to 1 range 2016-04-01 11:59:30 +09:00
Leonard Hall cffdced838 AP_MotorsSingle: support 4 servo outputs 2016-04-01 11:59:30 +09:00
Leonard Hall f53d6e95e8 AP_MotorsSingle: rename _rev_roll to _roll_reverse 
Also rename _rev_pitch to _pitch_reverse and _rev_yaw to _yaw_reverse
 2016-04-01 11:59:30 +09:00
Leonard Hall 4db73d86af AP_MotorsSingle: remove output_disarmed 2016-04-01 11:59:30 +09:00
Leonard Hall 46ab198ebc AP_MotorsSingle: remove output_armed_not_stabilizing 2016-04-01 11:59:30 +09:00
Leonard Hall 40c18891cf AP_MotorsCoax: remove reverse parameters 
No longer necessary because we can use individual servo reverse params
 2016-04-01 11:59:30 +09:00
Leonard Hall 260006dcb3 AP_MotorsCoax: move servo objects into Coax class 2016-04-01 11:59:30 +09:00
Leonard Hall 110d41ee24 AP_MotorsCoax: fix SV_SPEED param description 2016-04-01 11:59:30 +09:00
Leonard Hall 8d8f52b22f AP_MotorsCoax: output_to_motors implements spool logic 2016-04-01 11:59:30 +09:00
Leonard Hall b85c20bb65 AP_MotorsCoax: stability patch in 0 to 1 range 
Also removes setting of limits in stability patch
sets outputs for additional 2 servos
 2016-04-01 11:59:30 +09:00
Leonard Hall 7df9b2eb8c AP_MotorsCoax: support 4 servo outputs 2016-04-01 11:59:30 +09:00
Leonard Hall 7d6c6b5556 AP_MotorsCoax: rename _rev_roll to _roll_reverse 
Also rename _rev_pitch to _pitch_reverse and _rev_yaw to _yaw_reverse
 2016-04-01 11:59:30 +09:00
Leonard Hall 5cb44901ff AP_MotorsCoax: remove output_disarmed 2016-04-01 11:59:30 +09:00
Leonard Hall 3df52aad5f AP_MotorsCoax: remove output_armed_not_stabilizing 2016-04-01 11:59:30 +09:00
Leonard Hall 45a16d6dad AP_MotorsTri: implement output_to_motors for spool logic 2016-04-01 11:59:30 +09:00
Leonard Hall d0a7579fa0 AP_MotorsTri: stability patch in 0 to 1 range 2016-04-01 11:59:30 +09:00
Leonard Hall 80f77bc30b AP_MotorsTri: output_min does not set limits 2016-04-01 11:59:30 +09:00
Leonard Hall ba659be5cb AP_MotorsTri: rename _yaw_servo_reverse to _yaw_reverse 2016-04-01 11:59:30 +09:00
Leonard Hall 8c4d6d6fbe AP_MotorsTri: remove output_disarmed 2016-04-01 11:59:30 +09:00
Leonard Hall a2fdcfaf3f AP_MotorsTri: remove output_armed_not_stabilizing 2016-04-01 11:59:30 +09:00
Leonard Hall 397940a9a4 AP_MotorsMatrix: implement output_to_motors 2016-04-01 11:59:30 +09:00
Leonard Hall cdec8f3387 AP_MotorsMatrix: remove output_disarmed 2016-04-01 11:59:30 +09:00
Leonard Hall b965857229 AP_MotorsMatrix: remove output_armed_not_stabilizing 2016-04-01 11:59:30 +09:00
Leonard Hall d0c6d087a5 AP_MotorsMatrix: do not set limits in output_min 2016-04-01 11:59:30 +09:00
Leonard Hall 3fef60da45 AP_MotorsMatrix: stability patch in 0 to 1 range 
Includes storing motor level thrusts to _thrust_rpyt_out
rename _throttle_thr_mix_desired to _throttle_rpy_mix_desired
rename _throttle_thr_mix to _throttle_rpy_mix
use get_hover_throttle_as_high_end_pct
use throttle_thrust_max updated by multicopter spool logic
do not set limits in stability patch
 2016-04-01 11:59:30 +09:00
Leonard Hall 5841310ac7 AP_MotorsMulticopter: update_throttle_filter limits throttle to 0 to 1 2016-04-01 11:59:30 +09:00
Leonard Hall 420b90953c AP_MotorsMulticopter: throttle_radio_min, max to multicopter class 
Moved in from Motors class, only ever used by multicopters
No functional change
 2016-04-01 11:59:30 +09:00
Leonard Hall 2c9a02066d AP_MotorsMulticopter: remove unused functions and variables 2016-04-01 11:59:30 +09:00
Leonard Hall 290e657f61 AP_MotorsMulticopter: update_battery_resistance captures resting voltage while disarmed 
Previously it could also capture this when the input throttle was zero
 2016-04-01 11:59:30 +09:00
Leonard Hall bc42cb2a66 AP_MotorsMulticopter: update_battery_resistance uses get_throttle accessor 2016-04-01 11:59:30 +09:00
Leonard Hall 8228d9e72c AP_MotorsMulticopter: current_limit_max_throttle uses get_throttle accessor 2016-04-01 11:59:30 +09:00
Leonard Hall 3cbc15bb5b AP_MotorsMulticopter: add get_throttle_thrust_max accessor 2016-04-01 11:59:30 +09:00
Leonard Hall d7dc37bda0 AP_MotorsMulticopter: remove apply_thrust_curve_and_volt_scaling_pwm 2016-04-01 11:59:30 +09:00
Leonard Hall 06f25b669d AP_MotorsMulticopter: add roll, pitch, throttle and yaw pass through 2016-04-01 11:59:30 +09:00
Leonard Hall d7c27c949c AP_MotorsMulticopter: add spool_up_complete accessor function 2016-04-01 11:59:30 +09:00
Leonard Hall 983d2dc97a AP_MotorsMulticopter: update_throttle_filter does not set throttle_in 
get_throttle method now used to access filtered throttle
 2016-04-01 11:59:30 +09:00
Leonard Hall 3fc3858fbd AP_MotorsMulticopter: set_throttle_range calcs _min_throttle before use 2016-04-01 11:59:30 +09:00
Leonard Hall b26318c178 AP_MotorsMulticopter: output_logic implements spooling 2016-04-01 11:59:30 +09:00
Leonard Hall b7fe6aa16e AP_MotorsMulticopter: remove update_max_throttle 2016-04-01 11:59:30 +09:00
Leonard Hall be64c71065 AP_MotorsMulticopter: add get_current_limit_max_throttle 
returns the current limited maximum throttle as a number between 0 ~ 1 in the range throttle_min to throttle_max
 2016-04-01 11:59:30 +09:00
Leonard Hall 64ba45a683 AP_MotorsMulticopter: add spin_when_armed_low_end_pct 
returns the spin-when-armed value as a number from 0 to 1 in the range 0 to throttle_min
 2016-04-01 11:59:30 +09:00
Leonard Hall 49819d822f AP_MotorsMulticopter: add get_hover_throttle_as_high_end_pct 
Returns hover throttle as a number from 0 to 1 in the range from throttle_min to throttle_max
 2016-04-01 11:59:30 +09:00
Leonard Hall e625c105a4 AP_MotorsMulticopter: remove get_throttle_warn 2016-04-01 11:59:30 +09:00
Leonard Hall 3854f2eda7 AP_MotorsMulticopter: rename _throttle_thr_mix_desired to _throttle_rpy_mix_desired 
No functional change
Also rename _throttle_thr_mix to _throttle_rpy_mix
 2016-04-01 11:59:30 +09:00
Leonard Hall 65bbc23a08 AP_MotorsMulticopter: apply_thrust_curve_and_volt_scaling in 0 to 1 range 
existing equivalent pwm function becomes apply_thrust_curve_and_volt_scaling_pwm
 2016-04-01 11:59:30 +09:00
Leonard Hall cb39f8aab7 AP_MotorsMuticopter: calc_thrust_to_pwm converts thrust in 0 to 1 range to pwm 
pwm output is always between throttle min and throttle max
 2016-04-01 11:59:30 +09:00
Leonard Hall 80ddce103f AP_Motors: move set_throttle_filter_cutoff declaration 
No functional change
 2016-04-01 11:59:30 +09:00
Leonard Hall 649a8c461d AP_Motors: remove unused throttle_radio_min, max 
Moved to AP_MotorsMulticopter
 2016-04-01 11:59:30 +09:00
Leonard Hall e84011603c AP_Motors: remove unused throttle_pwm_scalar, rpy_pwm_scalar 2016-04-01 11:59:30 +09:00
Leonard Hall 8e1351e474 AP_Motors: init member to resolve compiler warning 2016-04-01 11:59:30 +09:00
Leonard Hall ed51c7a28d AP_Motors: replace throttle_control_input with throttle_in 
throttle_control_input was 0 to 1000 range, throttle_in is 0 to 1
 2016-04-01 11:59:30 +09:00
Leonard Hall c96b91efb6 AP_Motors: add output_to_motors 2016-04-01 11:59:30 +09:00
Leonard Hall ac579685df AP_Motors: remove output_armed_not_stabilizing 2016-04-01 11:59:30 +09:00
Leonard Hall 666a92ae2f AP_Motors: set_throttle accepts 0 to 1 range 2016-04-01 11:59:30 +09:00
Leonard Hall 3c74b4cc69 Motors: add get_roll_thrust which returns roll input in range 0 to 1 
Also added get_pitch_thrust, get_yaw_thrust
 2016-04-01 11:59:30 +09:00
Peter Barker a66da7be00 AP_Motors: correct parameter documenation 2016-03-17 16:10:10 +11:00
Lucas De Marchi 7d9153feb8 AP_Motors: replace header guard with pragma once 2016-03-16 18:40:42 +11:00
dgrat 5148e41c1a AP_Math: Cleaned macro definitions 
Moved Definitions into a separate header. Replaced PI with M_PI and
removed the M_PI_*_F macros.
 2016-02-27 02:51:33 -03:00
Jonathan Challinger 9a09a86bb8 AP_Motors: add AP_MOTORS_DENSITY_COMP_DISABLED option 2016-01-27 09:18:09 +09:00
Gustavo Jose de Sousa c2e3f05dbf waf: ardupilotwaf: prefix build context methods with ap_ 
It helps to distinguish between things from waf and things from ardupilotwaf.
 2016-01-22 20:10:29 -02:00
Gustavo Jose de Sousa 3d22490397 waf: examples: use methods from bld instead of ardupilotwaf 2016-01-22 20:10:29 -02:00
Gustavo Jose de Sousa d281067bcc waf: make example binaries be placed in 'examples' dir 
This commit makes examples' wscripts use ardupilotwaf.example() instead of
ardupilot.program().
 2016-01-15 16:46:41 -02:00
Andrew Tridgell b187a0c6eb AP_Motors: added quadplane frame type 
this puts the motors on outputs 5 to 8, to leave the first 4 for the
plane
 2016-01-09 07:38:51 +11:00
Randy Mackay b742ee9cfb AP_Motors: fix example sketch 2016-01-08 18:36:47 +09:00
Randy Mackay 6c458b07cb MotorsHeli_RSC: resolve compiler warning re init order 2016-01-07 12:31:49 +09:00
Andrew Tridgell 7c9ee9363b AP_Motors: added rc_map_mask() function 2016-01-06 22:09:40 +11:00
Andrew Tridgell dfccf8f713 AP_Motors: also wrap set_freq and enable_ch for motor mapping 2016-01-06 22:09:40 +11:00
Andrew Tridgell 77af00c5e1 AP_Motors: allow arbitrary mapping of channels on multirotors 
using RCn_FUNCTION with motor1, motor2 etc
 2016-01-06 22:09:40 +11:00
Andrew Tridgell 1b682e3c8f AP_Motors: swash servos are output only 2016-01-05 06:41:51 +11:00
Andrew Tridgell d31ba2b380 AP_Motors: added rc_write function 
this is intended to make remapping motors and rescaling output easier
 2016-01-04 16:56:54 +11:00
Andrew Tridgell 79c90d37f6 AP_Motors: apply HELI_RSC output type if available 2016-01-04 16:14:09 +11:00
Andrew Tridgell e1f4814068 AP_Motors: only set output side of range for RSC 2016-01-04 11:23:38 +09:00
Jonathan Challinger b803907163 AP_Motors: fix example build 2015-12-29 10:46:35 -08:00
Lucas De Marchi 8d252955f5 AP_Motors: don't link unused AP_Curve library 2015-12-28 10:23:23 -02:00
Lucas De Marchi a096703b06 Global: don't link with AP_Progmem 
AP_Progmem is not used anymore.
 2015-12-27 15:58:12 -02:00
Don Gagne ed7cd8d3f4 AP_Motors: fix invalid Range meta data 2015-12-27 16:10:44 +11:00
Robert Lefebvre 3a13db9333 AP_MotorsHeli: Add more parameter checks. 2015-12-07 14:51:42 +09:00
Lucas De Marchi c9d1456a66 AP_Motors: remove unused AP_ADC_AnalogSource 2015-12-03 13:32:43 +11:00
Caio Marcelo de Oliveira Filho 6e7b73610d waf: add waf support 2015-12-03 07:54:30 +11:00
Lucas De Marchi 2591261af6 Global: rename min and max macros to uppercase 
The problem with using min() and max() is that they conflict with some
C++ headers. Name the macros in uppercase instead. We may go case by
case later converting them to be typesafe.

Changes generated with:

	git ls-files '*.cpp' '*.h' -z | xargs -0 sed -i 's/\([^_[:alnum:]]\)max(/\1MAX(/g'
	git ls-files '*.cpp' '*.h' -z | xargs -0 sed -i 's/\([^_[:alnum:]]\)min(/\1MIN(/g'
 2015-12-01 16:28:09 -02:00
Andrew Tridgell 47b9f6598a AP_Motors: allow change to heli rotor speed controls while armed 
this helps a lot with tuning for gas helis
 2015-11-27 15:12:03 +09:00
Caio Marcelo de Oliveira Filho 513f4fe986 AP_Motors: example uses millis/micros/panic functions 2015-11-20 12:32:16 +09:00
Andrew Tridgell 8f4ce7f20b build: removed all nocore.inoflag files 
these were APM2 specific
 2015-11-16 08:05:17 +11:00
Robert Lefebvre b89b0d7f9e AP_MotorsHeli_Single: Move Servo_Test static variables to be class members 2015-11-12 19:37:37 +09:00
Robert Lefebvre bb7f8c1999 AP_MotorsHeli: Create Servo Test functionality 2015-11-12 19:37:34 +09:00
Robert Lefebvre eeb544d098 AP_MotorsHeli: Create SV_MAN=5=Oscillate servo setup mode. 2015-11-12 19:37:33 +09:00
Robert Lefebvre 4443ca9602 AP_MotorsHeli: Yaw servo to move when using SV_MAN param for setup. 2015-11-12 19:37:32 +09:00
Robert Lefebvre c2dff8749e AP_MotorsHeli: Change SV_MAN=2=Center to output _col_mid_pwm instead of 0 collective 2015-11-12 19:37:31 +09:00
Fredrik Hedberg 212eb85ff2 AP_MotorsHeli: Add min and max collective to manual servo modes 2015-11-12 19:37:30 +09:00
Robert Lefebvre 22729e6927 AP_MotorsHeli: Change servo manual #defines into enum 2015-11-12 19:37:29 +09:00
Robert Lefebvre 750728fa1e AP_MotorsHeli_Single: Add motor enable aux output functionality 2015-11-12 19:37:28 +09:00
Fredrik Hedberg 5fd7fe3e53 AP_Motors: Add manual servo override to center swash-plate for set-up in AP_MotorsHeli. 2015-11-12 19:37:25 +09:00
Jolyon Saunders ca28a49fa6 AP_Motors: Circular swash-plate limits for AP_MotorsHeli 2015-11-12 19:37:24 +09:00
Lucas De Marchi ca4ae1c9e0 AP_Motors: remove check for AVR CPUs 
Remove the checks for HAL_CPU_CLASS > HAL_CPU_CLASS_16 and
HAL_CPU_CLASS >= HAL_CPU_CLASS_75. Corresponding dead code will be
removed on separate commits.
 2015-11-04 12:14:14 +11:00
Lucas De Marchi 5244559010 Minimize AP_Progmem.h includes 
Most of AP_Progmem is already gone so we can stop including it in most
of the places. The only places that need it are the ones using
pgm_read_*() APIs.

In some cases the header needed to be added in the .cpp since it was
removed from the .h to reduce scope. In those cases the headers were
also reordered.
 2015-10-30 14:35:32 +09:00
Lucas De Marchi 20c6ffc5e3 Replace use of UARTDriver::printf_P() with UARTDriver::printf() 
This also starts to show warnings on places that were already using
wrong printf format strings.
 2015-10-30 14:35:25 +09:00
Lucas De Marchi 831d8acca5 Remove use of PROGMEM 
Now variables don't have to be declared with PROGMEM anymore, so remove
them. This was automated with:

    git grep -l -z PROGMEM | xargs -0 sed -i 's/ PROGMEM / /g'
    git grep -l -z PROGMEM | xargs -0 sed -i 's/PROGMEM//g'

The 2 commands were done so we don't leave behind spurious spaces.

AVR-specific places were not changed.
 2015-10-30 14:35:16 +09:00
Lucas De Marchi 2c38e31c93 Remove use of PSTR 
The PSTR is already define as a NOP for all supported platforms. It's
only needed for AVR so here we remove all the uses throughout the
codebase.

This was automated with a simple python script so it also converts
places which spans to multiple lines, removing the matching parentheses.

AVR-specific places were not changed.
 2015-10-30 14:35:04 +09:00
Randy Mackay ca942f39dd AP_Motors_Heli: remove unused allow_arming check 2015-10-27 09:14:40 +09:00
Caio Marcelo de Oliveira Filho 417651b1dc AP_Motors: remove unnecessary board includes from examples 2015-10-21 09:16:12 +11:00
Caio Marcelo de Oliveira Filho ec52df991c build: compile only the HAL files needed by the board 
Instead of requiring every program to specify the HAL related modules,
let the build system do it (in practice everything we compiled depended
on HAL anyway). This allow including only the necessary files in the
compilation.
 2015-10-21 09:16:07 +11:00
Caio Marcelo de Oliveira Filho 2e464a53c2 AP_HAL: make code not depend on concrete HAL implementations 
The switching between different AP_HAL was happening by giving different
definitions of AP_HAL_BOARD_DRIVER, and the programs would use it to
instantiate.

A program or library code would have to explicitly include (and depend)
on the concrete implementation of the HAL, even when using it only via
interface.

The proposed change move this dependency to be link time. There is a
AP_HAL::get_HAL() function that is used by the client code. Each
implementation of HAL provides its own definition of this function,
returning the appropriate concrete instance.

Since this replaces the job of AP_HAL_BOARD_DRIVER, the definition was
removed.

The static variables for PX4 and VRBRAIN were named differently to avoid
shadowing the extern symbol 'hal'.
 2015-10-21 09:16:07 +11:00
Lucas De Marchi f43f6c53f7 AP_Motors: Group writes to motors 
Surround calls to rcout->write() with rcout->cork() and rcout->push().
If the RCOutput implementation allows the writes are grouped and only
sent together to the underlying hardware.
 2015-10-06 10:42:18 +11:00
Lucas De Marchi e938075581 AP_MotorsCoax: get rid of _motor_to_channel_map 2015-09-29 12:01:41 +09:00
Lucas De Marchi ec4ebfde83 AP_MotorsSingle: get rid of _motor_to_channel_map 2015-09-29 12:01:28 +09:00
Lucas De Marchi 537599c01b AP_MotorsTri: get rid of _motor_to_channel_map 2015-09-29 12:01:14 +09:00
Lucas De Marchi 1572c9d4f4 AP_MotorsMatrix: get rid of _motor_to_channel_map 2015-09-29 12:00:56 +09:00
Lucas De Marchi 43268b9822 AP_MotorsHeli: get rid of _motor_to_channel_map 2015-09-29 12:00:18 +09:00
Lucas De Marchi 7ea141b774 AP_Motors_Multi: get rid of _motor_to_channel_map 2015-09-29 11:59:48 +09:00
Lucas De Marchi d97d97dc54 AP_Motors: get rid of _motor_to_channel_map 
This was only used for supporting APM1. The removal was mostly automatic
with:

    sed -i 's/pgm_read_byte(&_motor_to_channel_map\[\([^]]*\)\])/\1/g' libraries/AP_Motors/*.cpp
    sed -i 's/_motor_to_channel_map\[\([^]]*\)\]/\1/g' libraries/AP_Motors/*.cpp

And then remove references to MOTOR_TO_CHANNEL_MAP and
_motor_to_channel_map and make sure the variable used in shifts is
unsigned
 2015-09-29 11:59:25 +09:00
Andrew Tridgell f22a1d3e6d AP_Motors: display message in heli parameter_check() 2015-09-25 12:30:34 +10:00
Andrew Tridgell 9da2b2b430 AP_Motors: added H_GYR_GAIN_ACRO 2015-09-25 12:30:33 +10:00
Randy Mackay 1024790633 MotorsMulti: add throttle_max accessor 2015-09-07 15:10:02 +09:00
Randy Mackay e3ff4ed9c4 MotorsHeli: integrate RotorControlState 2015-08-31 11:43:59 +09:00
Randy Mackay cb47311416 MotorsHeli_RSC: add RotorControlMode enum 2015-08-31 11:43:58 +09:00
Randy Mackay 72efc85ee8 MotorsHeli_RSC: RotorControlState enum 2015-08-31 11:43:57 +09:00
Robert Lefebvre bde43412d8 AP_MotorsHeli: Fix RSC Mode 3 2015-08-31 11:43:55 +09:00
Robert Lefebvre 38ccd6e04f AP_MotorsHeli_RSC: Fix tail_type control 2015-08-31 11:43:54 +09:00
Robert Lefebvre 535da1d79a AP_MotorsHeli_Single: DDVPT to use it's own ramp and runup times 2015-08-31 11:43:51 +09:00
Robert Lefebvre 28318c4116 AP_MotorsHeli: Move Output functions into parent class 2015-08-31 11:43:50 +09:00
Robert Lefebvre 84102c3e3f AP_MotorsHeli: Rework how servo setup is done. 2015-08-31 11:43:49 +09:00
Robert Lefebvre 345663f705 AP_MotorsHeli: Simplify servo init/reset 2015-08-31 11:43:48 +09:00
Robert Lefebvre b11600aebe AP_MotorsHeli: Move set_delta_phase_angle into _Single class 2015-08-31 11:43:47 +09:00
Robert Lefebvre 3756c6b3f3 AP_MotorsHeli: Create RSC Throttle Curve mode for controlling gas engines. 2015-08-31 11:43:45 +09:00
Robert Lefebvre f853979816 AP_MotorsHeli: run RSC Control function in Output Min function 
Move Output_Min() function into Heli_Single class as it will eventually be overloaded by other helicopter class types.
 2015-08-31 11:43:44 +09:00
Robert Lefebvre 315f0408ae AP_MotorsHeli: RSC controller to use speed ramp as simple float scalar 2015-08-31 11:27:52 +09:00
Robert Lefebvre 91c7663ca2 AP_MotorsHeli: Set range of new RSC Servo object. 2015-08-31 11:27:51 +09:00
Robert Lefebvre cefa0c28a6 AP_MotorsHeli: RSC Mode 0 no longer a valid mode 2015-08-31 11:27:48 +09:00
Robert Lefebvre 981c96d8bc AP_MotorsHeli: Add more parameter checks 2015-08-31 11:27:47 +09:00
Robert Lefebvre ed08e9d531 AP_MotorsHeli_RSC: Split out rotor speed estimate into it's own function 2015-08-31 11:27:46 +09:00
Robert Lefebvre 064cc63512 AP_MotorsHeli: Colyaw function to check if rotor speed control is above idle 2015-08-31 11:27:45 +09:00
Robert Lefebvre 77e4bf39aa AP_MotorsHeli: rework RSC output() function to implement idle speed function 
Also, split out speed_ramp function
 2015-08-31 11:27:44 +09:00
Robert Lefebvre c3e7eed299 AP_MotorsHeli_Single: Fix recalc_scalars function 2015-08-31 11:27:42 +09:00
Robert Lefebvre 214d60abb9 AP_MotorsHeli: Create RSC_IDLE param 2015-08-31 11:27:41 +09:00
Robert Lefebvre 27f8d6bcd5 AP_MotorsHeli: Change RSC output() function into a state machine. 2015-08-31 11:27:40 +09:00
Robert Lefebvre 10b0be9e75 AP_MotorsHeli: Fully detail tradheli output functions and move manual servo handling 2015-08-31 11:27:39 +09:00
Robert Lefebvre 7dda0f651a AP_MotorsHeli: Rename tradheli servo objects for clarity 2015-08-31 11:27:38 +09:00
Robert Lefebvre 457d939e77 AP_MotorsHeli: Update includes so that it builds 2015-08-31 11:27:37 +09:00
Fredrik Hedberg e6119cf51f AP_Motors: Fix param indices in AP_MotorsHeli. 2015-08-31 11:27:36 +09:00
Fredrik Hedberg 411947ea7c AP_Motors: Rename output_yaw to move_yaw in AP_MotorsHeli_Single. 2015-08-31 11:27:35 +09:00
Fredrik Hedberg 1e8be73a27 AP_Motors: Fix formatting in AP_MotorsHeli_RSC. 2015-08-31 11:27:34 +09:00
Fredrik Hedberg e6957df54a AP_Motors: Fix param range comment in AP_MotorsHeli. 2015-08-31 11:27:33 +09:00
Fredrik Hedberg 97e09fa9b0 AP_Motors: Move traditional helicopter controls into AP_MotorsHeli_Single. 
Original commit by fhedberg, had to fix merge conflicts and now it appears I did the commit?
 2015-08-31 11:27:31 +09:00
Fredrik Hedberg af69a20ba5 AP_Motors: Break out yaw output in AP_MotorsHeli. 2015-08-31 11:27:30 +09:00
Fredrik Hedberg feb32f40ed AP_Motors: Break out servo init and reset in AP_MotorsHeli. 2015-08-31 11:27:29 +09:00
Fredrik Hedberg ae9a16dc27 AP_Motors: Move rotor speed control into AP_MotorsHeli_RSC. 2015-08-31 11:27:28 +09:00
Fredrik Hedberg 1bb6b65ce0 AP_Motors: Use C++11 initializers in AP_MotorsHeli. 2015-08-31 11:27:27 +09:00
Leonard Hall c357cb8f84 Copter: increase default thrust expo to 0.65 2015-08-23 16:42:05 +09:00
Gustavo Jose de Sousa 1e619c6c59 AP_Motors: standardize inclusion of libaries headers 
This commit changes the way libraries headers are included in source files:

 - If the header is in the same directory the source belongs to, so the
 notation '#include ""' is used with the path relative to the directory
 containing the source.

 - If the header is outside the directory containing the source, then we use
 the notation '#include <>' with the path relative to libraries folder.

Some of the advantages of such approach:

 - Only one search path for libraries headers.

 - OSs like Windows may have a better lookup time.
 2015-08-11 16:38:19 +10:00
Randy Mackay f009c2ddb9 Motors_Multicopter: add MOT_THR_MIX_MAX parameter 
Allows controlling the prioritisation of throttle vs attitude control
during active flight
 2015-08-07 17:39:09 +09:00
Leonard Hall 1a583c5382 AP_Motors: calc_roll_pwm based on throttle pwm range 2015-08-03 14:12:49 +09:00
Randy Mackay 5032cf9fbc Copter: init multicopter flags 
Resolves coverity warning

Also fixed indentation
 2015-07-25 14:00:29 +09:00
Randy Mackay e31f2d26c4 MotorsMulticopter: move get_hover_throttle_as_pwm to protected 
No functional change
 2015-07-21 16:27:04 +09:00
Randy Mackay c7c6228b5d MotorsMulticopter: remove virtual from set_yaw_headroom 2015-07-21 16:27:01 +09:00
Randy Mackay 4843be49de AP_MotorsTri: remove call to empty parent Init 
Also rename uses of Multirotor to Multicopter
 2015-07-21 16:25:48 +09:00
Randy Mackay f906934dfa AP_MotorsSingle: remove call to empty parent Init 
Also rename uses of Multirotor to Multicopter
 2015-07-21 16:25:45 +09:00
Randy Mackay 112e934072 AP_MotorsMatrix: remove call to empty parent Init 
Also rename uses of Multirotor to Multicopter
 2015-07-21 16:25:43 +09:00
Randy Mackay b1a4a6bf0a AP_Motors_Coax: remove call to empty parent Init 
Also rename uses of Multirotor to Multicopter
 2015-07-21 16:25:40 +09:00
Randy Mackay 4d1dfd94f5 AP_MotorsMulticopter: multicopter features moved in from parent 
Also rename from multirotor to multicopter
 2015-07-21 16:25:37 +09:00
Randy Mackay 7355ac9cb8 AP_MotorsHeli: implement empty slow start method 2015-07-21 16:25:34 +09:00
Randy Mackay a3fab10ef4 AP_MotorsHeli: init roll_radio_passthrough 2015-07-21 16:25:31 +09:00
Randy Mackay c9dedbd3b2 AP_Motors: remove multicopter only features 
Also rename uses of Multirotor to Multicopter
 2015-07-21 16:25:28 +09:00
Robert Lefebvre abb6eba291 AP_MotorsHeli: Change allow_arming check to use _rotor_speed_estimate 
In future, this will be used to check actual rotor speed (measured) if available, to prevent trying to arm with the rotor spinning.
 2015-07-21 16:25:21 +09:00
Robert Lefebvre 9fcbc77ce0 AP_MotorsHeli: Create rotor_speed_above_critical accessor 2015-07-21 16:25:11 +09:00
Robert Lefebvre 992c9c75bb AP_MotorsHeli: Create parameter_check method. 2015-07-21 16:25:04 +09:00
Robert Lefebvre e2fe640e6c Copter: Clean up helicopter allow_arming() function 2015-07-21 16:24:58 +09:00
Robert Lefebvre 61d6c5aa1d AP_Motors: Creation of AP_Motors_Multirotor class 2015-07-21 16:24:38 +09:00
Randy Mackay 8225e58454 AP_Motors: throttle_min method in 0 to 1000 range 
Previously the pwm range value was returned.  This value is only used by
the multicopter attitude controller's angle boost function.
 2015-07-20 20:44:46 +09:00
Randy Mackay 6bf6442396 MotorsMatrix; protect against divide by zero 
This should never happen but just to be safe
 2015-07-20 20:44:43 +09:00
Randy Mackay fa60c3dce8 MotorsCoax: fix output_armed_stabilized min thr limit 2015-07-20 20:44:36 +09:00
Randy Mackay 8a308205ce MotorsSingle: fix output_armed_stabilized min thr limit 2015-07-20 20:44:32 +09:00
Randy Mackay bd9a605086 MotorsTri: fix output_armed_stabilized min thr limit 
_min_throttle is in the pwm range but was being used as if in the 0 to
1000 range
 2015-07-20 20:44:23 +09:00
Randy Mackay e53c46bd8f MotorsMatrix: fix output_armed_stabilized min thr limit 
_min_throttle was being used as if it were in the 0 to 1000 range when
in fact it is in the pwm range.  This meant the lower limit was too low.
 2015-07-20 20:44:14 +09:00
Robert Lefebvre e1902e2289 AP_MotorsHeli: Remove unused _dt variable. 2015-07-14 20:13:43 +09:00
Robert Lefebvre 11214b3414 AP_Motors: move constraints to set_throttle 2015-06-22 13:52:59 +09:00
Robert Lefebvre 0c92565d23 AP_MotorsHeli: add Critical Rotor Speed param, use to switch off runup_complete 2015-06-19 15:10:53 +09:00
Robert Lefebvre 3ad6700c5d AP_MotorsHeli: add getters for rotor speed 2015-06-19 15:10:51 +09:00
Robert Lefebvre 8b917b82ee AP_MotorsHeli: Simplify set_desired_rotor_speed function definition 2015-06-19 15:10:50 +09:00
Robert Lefebvre 79e8c8f7f7 AP_MotorsHeli: whitespace fixes 2015-06-19 15:10:47 +09:00
Randy Mackay 2849430341 AP_Motors: init flags 
resolves coverity issue
 2015-06-08 14:46:16 +09:00
Andrew Tridgell d746e8fa29 AP_Motors: mark examples as nobuild 
waiting for fix from Rob
 2015-06-01 17:27:33 +10:00
Andrew Tridgell 89baf2bdf1 AP_Motors: convert example from .pde to .cpp 2015-06-01 17:07:05 +10:00
Robert Lefebvre 1424b17a83 AP_Motors_Heli: Change default RSC_SETPOINT to 700 2015-05-29 17:46:25 +09:00
Robert Lefebvre d24664ccf9 AP_MotorsHeli: Semantic change. Motor Runup to Rotor Runup 2015-05-29 17:46:18 +09:00
Robert Lefebvre 65ca09600c AP_Motors: Heli eliminate _dt member and fix rsc_runup calculation 2015-05-29 17:46:09 +09:00
Randy Mackay d777166c6f AP_MotorsTri: revert tail servo to Ch7 2015-05-25 22:27:38 +09:00
Randy Mackay 1a1fa7ca4b AP_MotorsHeli: add comment to avoid param conflict 2015-05-25 22:13:49 +09:00
Randy Mackay 4c94a69e33 AP_MotorsCoax: resolve param conflict with TradHeli 2015-05-25 22:13:47 +09:00
Randy Mackay 78b49fb4c6 AP_MotorsSingle: resolve param conflict with TradHeli 
Also rename servo reverse parameters to be consistent with tricopter
 2015-05-25 22:13:45 +09:00
Randy Mackay 8dc7cf7fa8 AP_MotorsTri: YAW_SV_REV values -1 or +1 
Also resolve parameter conflict with TradHeli
 2015-05-25 22:13:43 +09:00
Randy Mackay 71e4bccecb AP_Motors: init members in constructor 
Also add f to end of float constants
 2015-05-25 22:13:41 +09:00
Robert Lefebvre b8181b6b90 AP_Motors: RCMAP fix 
Remove all RC Input channels passed as reference into AP_Motors.  All input handling self-contained inside AP_Motors.
Rework Tricopter to use internal servo calcs.
 2015-05-25 22:13:32 +09:00
Jonathan Challinger 28731d2bdc AP_Motors: add throttle filter input constraint from -100 to 1100 2015-05-22 16:12:27 +09:00
Robert Lefebvre 73bafa131e AP_MotorsHeli: Overload output() 
To protect it from future interference from Multirotor code.
 2015-05-22 09:38:23 +09:00
Robert Lefebvre d3ce68a8ca AP_MotorsHeli: Overload update_throttle_filter() 
Do not reset filter to zero when disarmed to allow collective pitch servo movement.
 2015-05-22 09:38:20 +09:00
Randy Mackay 3d9a6a69e2 MotorsHeli: COLYAW to float 2015-05-08 14:14:36 +09:00
Randy Mackay edfa206bb8 Motors_Heli: nest heli params 2015-05-08 14:14:35 +09:00
Randy Mackay 68b05a4ca2 AP_Motors: is_throttle_mix_min returns bol 2015-05-08 14:14:32 +09:00
Leonard Hall 0f894ac1a8 AP_Motors: Rename and move Throttle Mix / Comp 2015-05-08 14:14:17 +09:00
Andrew Tridgell 2e57c62ebb AP_Motors: fix for HAL_SITL rename 2015-05-05 09:45:55 +10:00
Randy Mackay b223e90ef6 AP_Motors: fix example sketches 2015-05-01 20:58:20 +09:00
Randy Mackay 0acc06d713 AP_Motors: minor comment for interlock 2015-05-01 14:30:45 +09:00
Robert Lefebvre 1a482de5e2 AP_MotorsHeli: Overload output_armed_zero_throttle 2015-05-01 14:30:25 +09:00
Robert Lefebvre 6bdace30d2 AP_Motors: Add throttle interlock functionality 
AP_MotorsMatrix's output_armed_zero_throttle uses output_min default from base class
 2015-05-01 14:30:24 +09:00
Jonathan Challinger 348001e786 AP_Motors: add get_throttle_warn function 2015-05-01 12:56:11 +09:00
Randy Mackay bae1722946 AP_Motors: get_compensation_gain gets div-by-zero check 2015-04-29 14:36:22 +09:00
Jonathan Challinger 41ae7207c7 AP_Motors: scale roll/pitch/yaw gain for air density 2015-04-29 14:36:15 +09:00
Jonathan Challinger e2ba351149 AP_Motors: refactor apply_thrust_curve_and_volt_scaling 2015-04-29 14:36:12 +09:00
Jonathan Challinger a07b322d31 AP_Motors: set_throttle takes a float 2015-04-24 16:30:45 +09:00
Tom Pittenger a5ffadf201 AP_Motors: fix compile warnings re float constants 2015-04-24 14:04:00 +09:00
Jonathan Challinger 4993fd4d71 AP_Motors: use new lowpass filter 2015-04-17 10:46:47 +09:00
Jonathan Challinger e80776f1f5 AP_Motors: remove MOT_THR_FILT parameter and add interface to configure filter 2015-04-16 21:00:01 +09:00
Jonathan Challinger 8e442675a7 AP_Motors: introduce set_stabilize(bool), specifies whether torque demands should be output 2015-04-16 20:59:40 +09:00
Jonathan Challinger bc2afb31dd AP_Motors: virtual not necessary in child class 2015-04-16 20:59:37 +09:00
Jonathan Challinger a2c69fe90d AP_Motors: add optional motor output throttle filter 2015-04-16 20:59:31 +09:00
Leonard Hall 88be3d67e7 AP_Motors: add get for throttle comp 2015-04-16 13:29:50 +09:00
Leonard Hall 791fbcf9b3 AP_Motors_Class: time constants of throttle comp 2015-04-16 13:29:46 +09:00
Andrzej Zaborowski 132cdc4916 Motors: Use _motor_to_channel_map in tricopter consistently. 
In AP_MotorsTri.cpp the AP_MOTORS_MOT_1, _2 and _4 constants are
always mapped to actual output channels through _motor_to_channel_map
while the _CH_TRI_YAW is not, but there were a few inconsistencies
in this that could lead to things like PWM min and max values being
set on wrong channels.

It looks like all in all _motor_to_channel_map being in PROGMEM
probably doesn't help save memory and I'm not sure how useful it is
in the first place but regardless the usage should be consistent.
 2015-04-09 11:43:22 +09:00
Jonathan Challinger 1828515b3b AP_Motors: bug fix to _batt_voltage_filt 2015-04-01 10:15:06 -07:00
Jonathan Challinger 89cdd02f58 AP_Motors: remove duplicate get_throttle function 2015-04-01 10:15:05 -07:00
Jonathan Challinger 0e53c0a892 AP_Motors: make output_armed() and output_disarmed() pure virtual 2015-04-01 10:14:38 -07:00
Randy Mackay 385b3744ea MotorTri: check servo_out above min_throttle 2015-03-16 14:49:38 +09:00
Randy Mackay f9e29a7f77 MotorSingle: check servo_out above min_throttle 
We need to recalc radio_out or the motors could fall below min throttle
 2015-03-16 14:49:37 +09:00
Randy Mackay 8de5d16f96 MotorCoax: check servo_out above min_throttle 
We need to recalc radio_out or the motors could fall below min throttle
 2015-03-16 14:49:35 +09:00
Leonard Hall 31a55b2bd6 MotorsMatrix: fix div by zero by ensuring throttle is above min 2015-03-16 14:49:31 +09:00
Randy Mackay 5e26450a6f AP_Motors: make THR_LOW_COMP a variable instead of param 2015-03-10 12:20:27 +09:00
Leonard Hall 007c96a3d8 AP_Motors: Low throttle compensation setters 2015-03-10 12:20:21 +09:00
Leonard Hall 6275ee0289 AP_Motors: Check for battery voltage reading fail 2015-03-10 12:20:19 +09:00
Leonard Hall 3ad9b1a06b AP_MotorsMatrix: remove incorrect throttle limit flag 2015-03-06 14:02:55 +09:00
Jonathan Challinger d148039f65 AP_Motors: stricter batt_voltage misconfiguration check 2015-03-06 14:02:49 +09:00
Leonard Hall 11a19803e0 Motors: add accessors for motor logging 
accessor include get_roll, get_pitch, get_yaw, throttle input
 2015-03-06 14:01:58 +09:00
Randy Mackay f5f7cd540f Motors: fix example sketches 2015-03-03 21:39:24 +09:00
Leonard Hall cf8c211c35 Motors: fix thrust curve and add constraint 2015-03-03 15:49:07 +09:00
Leonard Hall 3e960dfc3b Motors: add get_voltage_comp_gain 
This clarifies that lift_max is the inverse of the battery voltage gain
compensation
 2015-03-03 15:49:04 +09:00
Leonard Hall 997c6f0868 Motors: move battery resistance calcs to parent 
Moving from MotorsMatrix to parent Motors class allows these to be used
from other frame types
Also initialise battery resistance
 2015-03-03 15:49:02 +09:00
Randy Mackay 09d7cdbc23 Motors: batt_voltage_filt becomes filter object 2015-03-03 15:49:00 +09:00
Leonard Hall 529c6fed3a Motors: move over current throttle limiting to parent 
Moving from MotorsMatrix to parent Motors class allows this to be used
from other frame types
 2015-03-03 15:48:54 +09:00
Randy Mackay 812473fd9a MotorsMatrix: use get_hover_throttle_as_pwm 2015-03-03 15:48:52 +09:00
Randy Mackay 1a9d3125ef Motors: _hover_out to pct * 10 instead of pwm 2015-03-03 15:48:50 +09:00
Leonard Hall 6b7bdf64bd Motors: move batt voltage lift_max calcs to parent 
Moving from MotorsMatrix to parent Motors class allows them to be used
by other frame types
Also added sanity check of batt_voltage_min
 2015-03-03 15:48:48 +09:00
Randy Mackay c549b58eb7 MotorsMatrix: remove check of throttle_curve_enabled 2015-03-03 15:48:46 +09:00
Randy Mackay 5fb3de48ee MotorsTri, Single, Coax: use new thrust curve 2015-03-03 15:48:44 +09:00
Randy Mackay 2eaa4a8445 Motors: remove old throttle curve 2015-03-03 15:48:42 +09:00
Leonard Hall 751dbb7df7 Motors: move thrust curve and volt scaling to parent 
Moving from MotorsMatrix to Motors allows it to be used from other frames
 2015-03-03 15:48:41 +09:00
Randy Mackay 80b498f598 Motors: add loop_rate to test sketch 2015-03-03 15:48:39 +09:00