Niels Joubert
4abbda616f
ArduCopter: GPS Callback for calculating base position
2014-06-30 10:29:56 +10:00
Andrew Tridgell
edafe7100b
Copter: update for AP_Mount change
2014-06-18 12:04:48 +10:00
Randy Mackay
e0f4a570c6
Copter: loiter turns radius from command's p1 field
2014-06-17 20:53:56 +10:00
Randy Mackay
01da4e29fb
Copter: use relative_alt flag when decoding change_alt command
2014-06-17 20:53:41 +10:00
Randy Mackay
50e024fe8f
Copter: flag current alt as relative
...
This is required so common Log_Write_Camera can calculate relative and
abs altitudes provided by either copter or plane
pair programmed with Craig Elder
2014-06-17 14:11:42 +10:00
Randy Mackay
8c488ebd87
Copter: use common Log_Write_Camera
...
pair programmed with Craig Elder
2014-06-17 14:11:39 +10:00
Randy Mackay
8c48b65175
Copter: bug fix to remove home variable
...
pair programmed with Craig Elder
2014-06-11 12:01:48 +09:00
Randy Mackay
d0194b7a9d
Copter: remove home variable
...
home has moved to ahrs
saves 15 bytes of RAM
2014-06-11 11:05:15 +09:00
Randy Mackay
5c305989b9
Copter: set home alt to absolute alt
2014-06-11 11:04:52 +09:00
Randy Mackay
09fc777ab9
Copter: slow motors after landing in AUTO
...
This resolves an issue in which the vehicle could tip over if the pilot
did not reduce the throttle to zero soon after landing in AUTO mode
2014-06-10 22:56:53 +09:00
Jason Short
a873942f73
Fix to restore Gimbal control after Mission with ROI
2014-06-10 20:03:05 +09:00
Randy Mackay
810c87969c
Copter: Ch7/8 switch to enable/disable feed forward and accel limiting
2014-06-10 20:03:04 +09:00
Randy Mackay
91b1d20b70
Heli: integrate AttControl's set_yaw_target_to_current_heading
2014-06-10 20:02:52 +09:00
Randy Mackay
08801eebf2
Copter: integrate AttControl's set_yaw_target_to_current_heading
2014-06-10 20:02:51 +09:00
lthall
babe655b8f
Copter: Remove acro acceleration slew todo
...
It has already been done :)
2014-06-10 20:02:37 +09:00
Randy Mackay
4221833028
Copter: flip records starting attitude
...
Previously flip relied on the attitude controller not updating the earth
frame target during the flip which can't be guaranteed. Safer for flip
to maintain it's own copy of the original attitude .
2014-06-10 20:02:32 +09:00
Randy Mackay
75c328a752
TradHeli: integrate init_targets rename to relax_bf_rate_controller
2014-06-10 20:02:30 +09:00
Randy Mackay
77d5d682c1
Copter: integrate init_targets rename to relax_bf_rate_controller
...
Also remove unnecessary init_targets from flight mode init functions.
2014-06-10 20:02:29 +09:00
Randy Mackay
083f2898a9
Copter: use fast_atan2 for bearings to home and next WP
2014-06-06 18:51:06 +09:00
Randy Mackay
f5f206b055
Copter: set inav alt to zero when arming
2014-06-06 18:42:45 +09:00
Ju1ien
abd1370b2c
Copter: flag stays landed unless pilot raises throttle
2014-06-06 18:42:30 +09:00
Valentin Brossard
9fcfea5404
Copter: accept DO_CHANGE_SPEED outside of missions
...
https://github.com/diydrones/ardupilot/issues/1095
2014-06-06 16:13:22 +09:00
Ju1ien
fd9502d3fa
Copter: Improve surface tracking dynamics
...
This little fix will allow much higher sonar_gain without the
oscillating effect it used to bring.
2014-06-06 15:32:49 +09:00
Randy Mackay
db000f2287
Copter: remove setting rate and thr D term filters
2014-05-29 17:40:24 +09:00
Robert Lefebvre
5eb206e6bb
Copter: Add 'handle' to allow #define updating of AC_PID filter rate for Throttle Accel.
2014-05-29 17:39:16 +09:00
Robert Lefebvre
df1de4260d
Copter: Set Rate PID D-term filter rates on initialization.
2014-05-29 17:39:12 +09:00
Robert Lefebvre
5ee87f7561
Copter: Change TradHeli to use new AC_HELI_PID class.
2014-05-29 17:39:04 +09:00
Randy Mackay
6496872885
Copter: release notes for AC3.1.5
2014-05-28 11:23:58 +09:00
Andrew Tridgell
1dbbdde8ef
Copter: use new GCS_Common.cpp functions
2014-05-28 09:35:57 +10:00
Randy Mackay
0b5ff80b3e
Copter: remove unused pos vector functions
...
removed pv_latlon_to_vector, pv_get_lat, pv_get_lon.
it would probably be best if these were moved into the Math library
2014-05-27 16:30:32 +09:00
Randy Mackay
d4a892c650
Copter: AC3.2-rc2 release notes and version
2014-05-27 14:44:15 +09:00
Randy Mackay
20719e23fd
Copter: enable PARACHUTE and RALLY for all but APM
2014-05-27 14:43:33 +09:00
Randy Mackay
af10a6817c
Copter: remove command_description.txt
...
Description in this file were out of date or incomplete and it is better
for people to refer to the MAVLink documentation or the
/libraries/GCS_MAVLink/message_definitions/common.xml and
ardupilotmega.xml files
2014-05-27 10:58:42 +09:00
Andrew Tridgell
a55c511f63
Copter: updates for new GCS_MAVLink API
2014-05-21 12:45:25 +10:00
Andrew Tridgell
cdcaad3079
Copter: update baud rate parameter descriptions
2014-05-21 12:45:25 +10:00
Andrew Tridgell
cc6fba4cad
Copter: change baudrates parameters to 16 bit
2014-05-21 12:45:25 +10:00
Randy Mackay
d5a0ca4f3c
Copter: integrate init_loiter_target name change
2014-05-19 12:27:29 +09:00
Randy Mackay
63135a044f
Copter: remove setting Z-axis target in Hybrid
...
This workaround is no longer required because AC_WPNav's
set_loiter_target call no longer sets the position controller's z-axis
target
2014-05-19 12:27:23 +09:00
Arthur Benemann
e1b7e53c04
Copter: only acceept Guided waypoints in Guided mode
...
Fix #1068 . When receiving guided waypoints do not change to GUIDED mode. This serves as a safety precaution for GCS, since they must switch to guided mode before sending the waypoints.
2014-05-17 12:02:53 +09:00
Randy Mackay
481a55867e
Copter: only send sonar distance to GCS when sonar enabled
2014-05-16 14:46:56 +09:00
Ben Nizette
8c7b4feac1
Copter: send sonar distance to GCS via MAVLink
...
At the moment, the copter sonar set up does not have access to the
raw sonar readings so this code sets the voltage field to zero.
2014-05-16 14:46:11 +09:00
Andrew Tridgell
836b365bc8
Copter: use setup_uart()
2014-05-16 11:45:11 +10:00
Andrew Tridgell
427a638296
Copter: added reporting of AHRS health
2014-05-15 21:14:21 +10:00
Randy Mackay
9f81e286d1
Copter: add Pixhawk pin to RSSI_PIN's @Value
...
Also prepend APM2 to existing definitions
2014-05-15 17:13:43 +09:00
Randy Mackay
f7a9ee24ef
Copter: minor comment update
2014-05-15 16:21:35 +09:00
Randy Mackay
715e9c0474
Copter: reset mission when disarming
2014-05-15 16:21:32 +09:00
Randy Mackay
7d4c74c28e
Copter: when leaving AUTO only stop mission if running
...
This resolves an issue in which the mission would not automatically
start from the beginning if it had previously been run to completion
2014-05-15 16:21:30 +09:00
Randy Mackay
a38e00c048
Copter: remove unused HIGH, LOW definitions
...
Minor commit to kick off the auto build so AC3.2-rc1 will go out
2014-05-09 16:35:21 +09:00
Randy Mackay
3f329d0857
Copter: version to AC3.2-rc1
2014-05-09 13:48:47 +09:00
Randy Mackay
e75d6a2da6
Copter: remove meaningless check from motor_test
2014-05-09 13:48:44 +09:00
Randy Mackay
0c7a3f1ec5
Copter: remove unused Log_Write_GPS function
2014-05-09 13:48:41 +09:00
Randy Mackay
b4dcad725c
Copter: remove unused servo_write function
2014-05-09 13:48:38 +09:00
Randy Mackay
1e8b99ad17
Copter: update release notes for AC3.2-rc1
2014-05-09 13:48:35 +09:00
Andrew Chapman
3f0a52cb53
Copter: ch7/8 switch for auto pause/continue
...
- added new mode for CH7/CH8 (#24 , auto mission reset)
- changed mission.start() to mission.start_or_resume() in auto_init()
2014-05-08 23:09:42 +09:00
Andrew Chapman
8640e11728
Copter: bug fix rally point landing target
...
was drifting toward home by some distance as (0,0,0) was hard-coded in
control_rtl.pde. Fixed, tested in SITL
2014-05-08 23:09:40 +09:00
Randy Mackay
197d83e32a
Copter: bug fix to sport roll pitch control
2014-05-08 16:16:02 +09:00
Randy Mackay
0af9d502d9
Copter: set pos controller speeds before circle init
...
This ensures stopping point is calculated correctly
2014-05-08 16:15:59 +09:00
Randy Mackay
3cc5b9446f
Copter: AUTO and Guided call wp_and_spline_init
2014-05-08 16:15:55 +09:00
Randy Mackay
11918869a5
Copter: RTL calls wp_and_spline_init
2014-05-08 16:15:52 +09:00
Randy Mackay
ff1a58e078
Copter: increase LOITER_RATE_IMAX to 1000
...
This allows us to load up the I term with the vehicle's current
acceleration during mode transitions
pair programmed with Randy
2014-05-08 16:15:34 +09:00
Randy Mackay
fb2be07b44
Copter: update AC_WPNav instantiation
2014-05-08 16:15:29 +09:00
Randy Mackay
10d7ab5840
Copter: update release notes for AC3.1.4
2014-05-08 11:58:37 +09:00
Randy Mackay
afb9c0a5c7
Copter: update release notes for AC3.1.4-rc1
2014-05-02 14:23:13 +09:00
Randy Mackay
0ad3c1e15e
Copter: add EKF to Ch7/Ch8 Opt parameter description
2014-05-02 10:02:23 +09:00
Randy Mackay
d857427444
Copter: disable RALLY points by default
...
This saves 2k of flash which allows the code to fix on the APM1/2
2014-04-30 21:46:21 +09:00
Randy Mackay
a3036fc443
Copter: init pos_control z-axis after setting speed and accel
2014-04-30 21:46:17 +09:00
Randy Mackay
a4c675c23e
Copter: add PILOT_ACCEL_Z parameter
...
Allows configurable z-axis acceleration when pilot is controlling
altitude
2014-04-30 21:46:13 +09:00
Randy Mackay
7d7a2aced7
Copter: init vert speed and accel for each flight mode
...
This resolves issue #1021 in which LAND mode could descend at the
PILOT_VELZ rate instead of the WPNAV_SPEED_DN
Pilot defined acceleration is used for AltHold, AutoTune , Circle,
Hybrid, Loiter, OF_Loiter and Sport flight modes
Waypoint Nav (ie. AutoPilot) acceleration is used for Auto, Land, RTL
2014-04-30 21:46:10 +09:00
Randy Mackay
466e9db1f9
Copter: integrate AC_WPNav get_speed_xy name change
2014-04-30 21:46:07 +09:00
Randy Mackay
5b3438850d
Copter: fix typo in Log_Write_Baro
...
Log_Write_Baro should be an empty function when logging is disabled
Fix contributed by Jason Short
2014-04-30 08:50:51 +09:00
Craig Elder
241557e5e0
Copter: Corrected typo in RC_FEEL_RP parameter description
2014-04-28 23:56:49 -07:00
Randy Mackay
416e9457ce
Copter: remove cli motor test
2014-04-29 11:41:17 +09:00
Randy Mackay
ae9477600c
Copter: add mavlink motor_test
...
Based on original work by Nils Hogberg
2014-04-29 11:31:45 +09:00
Craig Elder
00033bd302
Copter: Update RC_FEEL_RP Description
2014-04-28 17:44:09 -07:00
Randy Mackay
b9b3a39a83
Copter: fence enable/disable via MAVLink
2014-04-27 16:18:17 +09:00
Randy Mackay
d3411e45bb
Copter: use get_current_nav_index()
2014-04-27 16:00:44 +09:00
Randy Mackay
5fe86a657e
Copter: land_do_not_use_GPS has no return value
2014-04-27 15:41:41 +09:00
Randy Mackay
0665cf6b28
Copter: RTL alt should not be above fence alt
...
Resolves issue #435
If the altitude fence is enabled, when the vehicle RTLs it will return
at the lower of the RTL_ALT and the FENCE_ALT_MAX
2014-04-27 15:41:37 +09:00
Randy Mackay
4686eef266
Copter: GPS failsafe ensures LAND is pilot-controlled
...
This resolves issue #880 in which if a GPS failsafe occurred while the
vehicle was already in LAND mode, the LAND would continue to be GPS
controlled LAND instead of pilot-controlled LAND
2014-04-27 15:11:47 +09:00
Randy Mackay
dba8fac515
Copter: remove unused variables from fence.pde
...
saves 2 bytes
2014-04-27 11:11:12 +09:00
Randy Mackay
1aeaa5955b
Copter: integrate 10sec manual recovery after fence breach
2014-04-27 11:11:09 +09:00
Randy Mackay
20de5b3006
Copter: Loiter clears out pilot acceleration when failsafe occurs
...
This ensures invalid pilot desired accelerations are cleared from the
loiter controller. This is probably not strictly necessary because the
vehicle should switch out of Loiter and into RTL during failsafe.
2014-04-25 14:45:19 +09:00
Randy Mackay
05d9dc5cba
Copter: RTL always land if in radio failsafe
...
Resolves issue in which vehicle would get stuck at RTL_ALT_FINAL if
failsafe occured.
Also clear out pilot acceleration from loiter controller if failsafe
occurs during the final descent.
2014-04-25 14:45:16 +09:00
Randy Mackay
40650aeb68
Copter: roll and pitch nudging in RTL descent
2014-04-25 14:17:03 +09:00
Michael Oborne
68f439acbe
Fix auto doc group names
2014-04-25 07:53:03 +08:00
Randy Mackay
19f1e7fec4
Copter: disable Parachute by default
...
This saves 1k of flash and we are desperately low on the APM1/APM2.
Hopefully we can find savings somewhere and re-enable it by default.
2014-04-24 19:02:32 +09:00
Randy Mackay
ea64438ef9
Copter: RTL ensures heading is back to initial heading
...
This fixes the issue in which a short RTL_LOIT_TIME could cause the
vehicle's heading to be caught between it's heading when it arrived at
home and the initial armed heading. With this fix it now waits above
home until the timer has run out AND the heading is within 2degrees of
the initial armed heading.
2014-04-24 18:54:49 +09:00
Randy Mackay
e23115516d
Copter: disarm after completing RTL
...
Note that an RTL command executed in AUTO mode will also disarm when it
lands and pilot's throttle is put to zero and no further commands will
be executed. This is normally not an issue because missions generally
end with an RTL (instead of having the RTL in the middle) and a work
around is available in that the LAND command could be used instead of
RTL.
2014-04-24 17:27:30 +09:00
Randy Mackay
a5602c5f14
Copter: updated contributors list
...
Add JulianD and SandroT and replaced tabs with spaces
2014-04-24 11:28:41 +09:00
Ju1ien
78a3e0f5a2
Copter: Hybrid removed Wind_comp_estimate filter
...
Removed useless call of function
hybrid_get_wind_comp_lean_angles(hybrid.wind_comp_roll,
hybrid.wind_comp_pitch);
Removed 10Hz filter for hybrid_update_wind_comp_estimate()
2014-04-24 11:28:37 +09:00
Randy Mackay
287af8f66e
Copter: disable optical flow by default
...
We have run out of flash on the APM2, it was a choice between Hybrid
flight mode and OF_Loiter
2014-04-23 15:27:08 +09:00
Randy Mackay
55e7e1eb3e
Copter: allow HYBRID to be disabled to save flash
...
Hybrid flight mode costs 4.5k of flash which currently puts us over the
limit for APM1 and APM2 unless optical flow or other features are
disabled
2014-04-23 15:27:05 +09:00
Randy Mackay
ba94fc9796
Copter: Hybrid move reset_I into structure
...
Saves 1 byte of RAM
2014-04-23 15:00:09 +09:00
Ju1ien
ff532a06ec
Copter: Hybrid fixes to wind_comp, brake pitch timer, thr peaks
...
There was an error in the velocity axis used to update
brake_timeout_pitch (vel_right instead of vel_fw)
The wind_comp was not enough filtered for the Pixhawk (400Hz), so I
added a specific time constant (TC_WIND_COMP) to have the expected
filter with 400Hz controllers.
About throttle peaks, after some tests and from logs, they happen when
hybrid switches to loiter.
There is always a difference between Alt and DesiredAlt (DAlt), but,
when loiter engages, it initializes DAlt = Alt and the copter tries
immediatelly to reach that new setpoint. So the solution would be to
init_loiter_target() just as it was in pre-onion code : only x/y and not
z. and to be able to pass parameters like that
wp_nav.init_loiter_target(inertial_nav.get_position(), Vector3f(0,0,0));
Well, from this new code structure, it seems not possible with current
functions so I've used set_loiter_target that init position passed as
parameter and velocity to 0 (as expected).
BTW, I think there was something wrong with set_loiter_target function,
the "Vector3f& position" parameter was not used at all...
I moved the reset flag from init_loiter_target to set_loiter_target.
2014-04-23 15:00:04 +09:00
Ju1ien
14cbb09804
Copter: hybrid add Brake or Loiter to Pilot override transition
...
Corrected a little mistake in get_wind_comp...()
Mixed transition not only from loiter but as well from brake to manual
override
2014-04-23 15:00:01 +09:00
Ju1ien
43b1dd748b
Copter: hybrid init brake roll and pitch at loiter exit
2014-04-23 14:59:59 +09:00
Ju1ien
d745060c80
Copter: fix Hybrid flight mode in Parameter description
2014-04-23 14:59:56 +09:00
Ju1ien
f8e8d4024d
Copter: Hybrid's max brake angle to 30deg
2014-04-23 14:59:53 +09:00
Ju1ien
b3e8112d24
Copter: Hybrid fix wind_comp time constant
...
Corrected timer init values and wind_comp time constant to get the best
behaviour
Check if wider deadband required (current is 30).
We were using a comparison to a 70-100 cdeg deadband in our initial
code. The deadband was there to avoid unwanted switches in case of
inaccurate fingers/radio
Adjusted timers to 100/400Hz
I_term does not init when in hybrid loiter
2014-04-23 14:59:43 +09:00
Randy Mackay
4778c73de2
Copter: Hybrid 10hz updates to wind comp lean angles
2014-04-23 14:59:40 +09:00
Randy Mackay
f87ab21063
Copter: Hybrid estimates wind when speed under 10cm/s
2014-04-23 14:59:38 +09:00
Randy Mackay
d36f137bf8
Copter: allow arming, disarming in Hybrid mode
2014-04-23 14:59:35 +09:00
Randy Mackay
e2aaafe40b
Copter: hybrid works for 100hz and 400hz
2014-04-23 14:59:33 +09:00
Randy Mackay
705ff3f44f
Copter: add hybrid_mix_controls
...
Allow wind comp estimate to run when vehicle travelling up to 30cm/s
(was 10cm/s)
2014-04-23 14:59:30 +09:00
Randy Mackay
e48c93d93c
Copter: restructure hybrid into more states
2014-04-23 14:59:28 +09:00
Randy Mackay
f467d7bc20
Copter: add Hybrid parameters
2014-04-23 14:59:25 +09:00
Randy Mackay
754bae5748
Copter: refactor and split out wind compensation
2014-04-23 14:59:23 +09:00
Randy Mackay
d9c685323a
Copter: add hybrid state struct, formatting changes
2014-04-23 14:59:20 +09:00
Randy Mackay
b5ed23f592
Copter: integrate skeleton Hybrid mode
2014-04-23 14:59:17 +09:00
Ju1ien
832fc62016
Copter: control_hybrid initial version
2014-04-23 14:59:15 +09:00
Randy Mackay
5fc071f5f9
Copter: restore SITL to run at 100hz
2014-04-21 21:46:22 +09:00
Andrew Tridgell
e07b70de4e
Copter: set AHRS vehicle class
2014-04-21 18:13:13 +10:00
Randy Mackay
01538c5290
Copter: remove unused lon_error, lat_error
2014-04-21 15:06:32 +09:00
Randy Mackay
8ac14023b4
Copter: set main loop rate from CPU class
...
Previously this was determined by the board
2014-04-21 13:32:00 +09:00
Randy Mackay
a1edf347bf
Copter: STB_RLL_P and STB_PIT_P @Range 3 to 12
2014-04-21 10:41:01 +09:00
Randy Mackay
b9845047f4
Copter: bug fix AP_Rally param directory
2014-04-19 22:37:01 +09:00
Randy Mackay
7af5d4a8ce
Copter: remove RALLY_WP_SIZE definition
2014-04-19 15:00:30 +09:00
Andrew Chapman
fa3732ac6d
Copter: integrate AP_Rally
2014-04-19 15:00:23 +09:00
Randy Mackay
817c893f21
Copter: bug fix for conditional_distance command
...
Due to a race condition, the wp_distance was not being updated before
the conditional_distance
2014-04-17 22:23:28 +09:00
Randy Mackay
f29ad3a2e0
Copter: bug fix for when WP_YAW_BEHAVIOR is 0
2014-04-17 16:53:06 +09:00
Randy Mackay
c53a0fcfd9
Copter: conditional yaw fix
...
waypoint command was setting auto_yaw_mode when it was run after the
do-cmd
yaw_look_at_heading was being set to current heading which was
overwriting the caller's desired heading
2014-04-17 16:41:36 +09:00
Randy Mackay
7f00bd7f5d
Copter: default WAYPOINT to current pos if lat, lon, alt are zero
2014-04-16 20:33:43 +09:00
Randy Mackay
d2dad1b2c1
Copter: remove unused circle_desired_rotations
...
desired num rotations is already held in command so we save 1byte of RAM
2014-04-16 16:28:11 +09:00
Randy Mackay
e6d2692eab
Copter: Loiter_Turns moves to edge of circle if location provided
2014-04-16 16:28:08 +09:00
Randy Mackay
f6676be400
Copter: integrate change in AC_Circle init
...
Removed init_loiter_target when vehicle landed. We should add some
initialisation of the circle controller when landed.
2014-04-16 16:28:06 +09:00
jschall
ff9838ea27
Copter: Document stream rate parameter functionality
2014-04-15 16:05:45 +09:00
Kevin Hester
4bfd6b8ddd
Copter: fixup line endings to be newline
2014-04-15 15:54:13 +09:00
Randy Mackay
cf86e304f0
Copter: add V-Tail to FRAME param's @Value
2014-04-15 12:18:31 +09:00
Randy Mackay
729026d80c
Drift: get velocity using const reference
2014-04-14 11:34:17 +09:00
Emile Castelnuovo
f5a68fdba1
Copter: clear RC in overrides on GCS failsafe.
2014-04-13 22:59:51 +09:00
TeamOSEOLA
7dda8afd60
Copter: Fixed GPS_ok() status checking
...
Fixed the GPS_ok() so that TRUE is returned in the cases of DGPS and Assisted GPS fixes, not just 3D fix.
2014-04-11 09:01:35 +10:00
Andrew Tridgell
1189978334
Copter: ensure we log both GPS at the time we receive a message
2014-04-10 10:30:10 +10:00
Randy Mackay
e7d73aa856
Copter: enable GCS failsafe to RTL by default
...
This only triggers if the user has been using the GCS's RC override
2014-04-09 10:50:35 +09:00
Randy Mackay
037a0b4e5a
Copter: dos2unix Parameters.h
2014-04-08 23:30:15 +09:00
Emile Castelnuovo
a9bd4e9da1
VRBRAIN: added ignore board voltage check for VRBRAIN boards.
2014-04-08 16:19:20 +10:00
Emile Castelnuovo
9e31f032c2
Copter: added VRBRAIN board #includes and #defines
2014-04-08 16:19:20 +10:00
Randy Mackay
8a4d82f43a
Copter: AC3.1.3 release notes
2014-04-07 14:28:12 +09:00
Randy Mackay
9bf9e0ede9
Copter: check parachute is enabled before manual_release
2014-04-07 13:37:15 +09:00
Randy Mackay
01e5ae6e5c
Copter: integrate parachute alt_min units change
2014-04-07 13:37:12 +09:00
Randy Mackay
47c1cb8b99
Copter: log parachute events
2014-04-07 13:36:59 +09:00
Randy Mackay
2b4d2697b2
Copter: process MAV_CMD_DO_PARACHUTE commands
2014-04-07 13:36:56 +09:00
Randy Mackay
56768a8d61
Copter: add min alt check to parachute release
2014-04-07 13:36:50 +09:00
Randy Mackay
340f3a7f9d
Copter: ch7/ch8 parachute release
2014-04-07 13:36:47 +09:00
Randy Mackay
ac982656fd
Copter: extend crash check to trigger parachute
2014-04-07 13:36:46 +09:00
Randy Mackay
ff32b27272
Copter: integrate parachute lib
2014-04-07 13:36:44 +09:00
Andrew Tridgell
ae350e42aa
Copter: show next wp when not running a mission
...
this lets the GCS know what wp would be run if auto mode is selected
2014-04-07 11:41:05 +10:00
Andrew Tridgell
454d1f26c3
Copter: added support for SERIAL_CONTROL message
2014-04-05 07:34:34 +11:00
Andrew Tridgell
339689b578
Copter: fixed load average for different loop rates
...
Pair-Programmed-With: Paul Riseborough <p_riseborough@live.com.au>
2014-04-04 21:37:56 +11:00
Andrew Tridgell
27ad8c39d6
Copter: enable passthrough auxillary channels
2014-04-03 12:19:44 +11:00
Andrew Tridgell
7bf12cfd8a
Copter: update for gps.setHIL() API
2014-04-02 07:55:28 +11:00
Andrew Tridgell
852cdbaa7c
Copter: added GPS parameters
2014-04-01 06:38:25 +11:00
Andrew Tridgell
640b64f5e4
Copter: convert to new GPS API
2014-04-01 06:38:24 +11:00
Andrew Tridgell
198388b5e0
Copter: use AP_GPS_Auto for 2nd GPS
2014-04-01 06:38:23 +11:00
Kevin Hester
5fb3b031f1
Copter: disambiguate the various causes of "Bad GPS Pos"
...
I've seen a fair number of user questions where they are confused by
"Bad GPS Pos" on their GCS/not being allowed to arm. This change splits
the remaining causes of this fault into separate messages.
Hopefully this increases the odds of the user self diagnosing...
2014-03-31 21:59:12 +09:00
Randy Mackay
9e7021cc20
Copter: Notify arming failure when using MAVLink
2014-03-31 20:34:31 +09:00
Jonathan Challinger
608b8b0a2c
Copter: integrate Notify arming failure when using yaw sticks
2014-03-31 20:34:29 +09:00
Randy Mackay
4b6f03cc11
Copter: remove do_land's use of RTL_ALT_MAX
2014-03-31 20:34:21 +09:00
Jonathan Challinger
2601ac9959
Copter: Remove 80m altitude limit on RTL
2014-03-31 20:34:19 +09:00
Jonathan Challinger
045c6d8c3f
Copter: Only play GPS tone when armed
2014-03-31 20:34:16 +09:00
Randy Mackay
d9fd577fb0
Copter: add Drift throttle assist constraints
2014-03-31 15:40:00 +09:00
Jason Short
50dcbe6549
Copter: Drift throttle assist range increased
...
Throttle assist is applied from 213 ~ 787
Deadband and constraint added
2014-03-31 13:09:57 +09:00
Jason Short
bccf1de563
Copter: add drift throttle assist
2014-03-31 13:09:54 +09:00
Randy Mackay
7d5d0d12a2
Copter: spline bug fixes
...
Next waypoint's location must be passed in even if it's a straight
segment.
mission.get_next_nav_cmd's start_index should be the current command +1
2014-03-29 17:57:45 +09:00
Randy Mackay
ac364c93dd
Copter: bug fix for simple_mode when run at 400hz
...
Mark radio frame as consumed so that simple mode does not apply the yaw
correction more than once when run at very high rates (like 400hz on
Pixhawk)
2014-03-28 17:03:31 +09:00
Randy Mackay
176a450ad2
Copter: remove spline handling from regular wp_nav
2014-03-28 09:23:41 +09:00
Randy Mackay
d541fefab4
Copter: add do_spline_wp and verify_spline_wp functions
2014-03-28 09:23:33 +09:00
Randy Mackay
8f946a3a8c
Copter: remove original_wp_bearing
...
To-Do: extend wpnav yaw control to only repoint nose towards waypoint if
it is more than 5m or 10m away
2014-03-28 09:23:21 +09:00
Randy Mackay
392162747a
Copter; integrate WPNAV's get_yaw
2014-03-28 09:23:17 +09:00
Randy Mackay
3753550a72
Copter: integrate get_spline_yaw
2014-03-28 09:23:11 +09:00
Randy Mackay
c0f12911ec
Copter: minor format change
2014-03-28 09:23:02 +09:00
Randy Mackay
0822adfb34
Copter: integrate spline navigation
2014-03-28 09:22:59 +09:00
Andrew Tridgell
78ba1a33aa
Copter: support 18 input channels in MAVLink
2014-03-25 14:47:43 +11:00
Andrew Tridgell
c0767eebff
Copter: support 14 RC channels on PX4
2014-03-25 14:47:05 +11:00
Andrew Tridgell
e1b9135946
Copter: updates for new RCInput API
2014-03-25 14:47:04 +11:00
Andrew Tridgell
3362e42478
Copter: consider health of primary compass in SYS_STATUS, pre-arm and compassmot
...
this should prevent users from taking off with only secondary compass
2014-03-24 19:52:08 +11:00
Andrew Tridgell
11e5b95878
Copter: updates for GPS changes
2014-03-24 12:04:46 +11:00
Randy Mackay
71f61c9bef
Copter: fix typo to show ATUN FMT in dataflash logs
2014-03-21 15:44:06 +09:00
Andrew Tridgell
4a01315fc5
Copter: enable logging of RADIO_STATUS
2014-03-20 09:56:37 +11:00
Andrew Tridgell
a345a9d993
Copter: removed check on target component in arm
...
Thanks to DonLakeFlyer for finding this, see
https://github.com/diydrones/ardupilot/pull/909
2014-03-20 09:06:28 +11:00
Randy Mackay
88527cd01c
Copter: integrate Mission cmd field changes
2014-03-19 12:14:25 +09:00
Andrew Tridgell
e4b3323455
Copter: use common deferred message handling
2014-03-19 12:14:20 +09:00
Andrew Tridgell
69252868a8
Copter: use common MISSION_ITEM handling
2014-03-19 12:14:12 +09:00
Andrew Tridgell
f4ed2beacd
Copter: use new common MAVLink message handlers
2014-03-19 12:13:40 +09:00
Randy Mackay
6ef2b55602
Copter: use common GCS_MAVLink handle_mission methods
2014-03-19 12:13:22 +09:00
Andrew Tridgell
85725de9cb
Copter: use new handle_mission_request()
...
Pair-Programmed-With: Randy Mackay <rmackay9@yahoo.com>
2014-03-19 12:13:15 +09:00
Randy Mackay
a3573f9ebd
Copter: minor typo in do_change_speed processing
...
It is unlikely that the "f" at the end of the 100 is required to
maintain the full precision of the target speed but added just in case
2014-03-19 12:12:55 +09:00
Randy Mackay
08b78db43c
Copter: use mission command specific structures
2014-03-19 12:12:54 +09:00
Randy Mackay
2f8daf2fa9
Copter: integrate dataflash Log_Write_MavCmd
2014-03-19 12:12:46 +09:00
Randy Mackay
edab06a3ff
Copter: truncate mission before uploading new mission
...
replacing clear with truncate allows new missions to be uploaded while
the current mission is running
2014-03-19 12:12:36 +09:00
Randy Mackay
f3813593b7
Copter: use Dataflash lib's Log_Write_Cmd
2014-03-19 12:12:11 +09:00
Randy Mackay
7b6906ae3f
Copter: integrate variable max num commands
2014-03-19 12:12:01 +09:00
Randy Mackay
b587d0d597
Copter: pass eeprom start to Mission constructor
2014-03-19 12:11:56 +09:00
Randy Mackay
b718b9070a
Copter: call mission.init during startup
2014-03-19 12:11:47 +09:00
Randy Mackay
cc7b1c4e9c
Copter: init_home checks cmd read success before logging
2014-03-19 12:11:39 +09:00
Randy Mackay
fa96e9355b
Copter: init cmd before saving with Ch7/Ch8
2014-03-19 12:11:21 +09:00
Randy Mackay
0fc36fd244
Copter: CMD dataflash logs use uint16 for total and num
2014-03-19 12:11:15 +09:00
Randy Mackay
6bb05750e7
Copter: remove alt_in_cm from mavlink to cmd conversion
2014-03-19 12:11:04 +09:00
Randy Mackay
04166c1686
Copter: replace memset in GCS_Mavlink
2014-03-19 12:10:52 +09:00
Randy Mackay
c3162f67e8
Copter: integrate move of p1 from Location to mission cmd
2014-03-19 12:10:48 +09:00
Randy Mackay
aade894014
Copter: integrate replace_cmd
2014-03-19 12:10:43 +09:00
Randy Mackay
54c99d84ea
Copter: integrate AP_Mission set_current_cmd
2014-03-19 12:10:39 +09:00
Randy Mackay
36af34bf8b
Copter: send current wp as 65535 to GCS when mission complete
2014-03-19 12:10:34 +09:00
Randy Mackay
92738533fe
Copter: auto starts only when num cmds > 1
...
num_commands will be 1 when there is no mission because home counts as
the first command
2014-03-19 12:10:30 +09:00
Randy Mackay
f77b2af661
Copter: use common location options masks
2014-03-19 12:10:26 +09:00
Randy Mackay
070cbc9250
Copter: use Mission mav to cmd conversion methods
2014-03-19 12:10:24 +09:00
Randy Mackay
67a4b47f6b
Copter: pass ahrs into mission constructor
2014-03-19 12:10:15 +09:00
Randy Mackay
37fe229ded
Copter: remove unused definitions
2014-03-19 12:10:12 +09:00
Randy Mackay
359f1a27ec
Copter: process cmds from mission lib
2014-03-19 12:10:11 +09:00
Randy Mackay
6e0e672fb2
Copter: log using mission commands
2014-03-19 12:10:09 +09:00
Randy Mackay
43c7310540
Copter: ch7 save wp feature to use ap_mission
2014-03-19 12:10:08 +09:00
Randy Mackay
ffc418dfe3
Copter: add mavlink packet to cmd conversion to GCS_Mavlink.pde
2014-03-19 12:10:06 +09:00
Randy Mackay
9f03e21f81
Copter: remove low-level handling of mission cmds
...
Now handled by AP_Mission
2014-03-19 12:10:04 +09:00
Randy Mackay
5d568502a0
Copter: instantiate AP_Mission object
2014-03-19 12:10:03 +09:00
Randy Mackay
1bad6a4b15
Copter: add AP_Mission object parameter
...
Remove global command_total and command_index parameters
2014-03-19 12:10:01 +09:00
Randy Mackay
0d23c3b910
Copter: initialise vertical speed for Loiter mode
2014-03-17 10:17:57 +09:00
Holger Steinhaus
39df609235
Copter: fixed vertical speed init for ALT_HOLD mode
2014-03-17 10:12:35 +09:00
Andrew Tridgell
43d009e3a5
Copter: set 2nd GPS as secondary
2014-03-08 21:48:18 +11:00
Randy Mackay
9287e28307
Copter: bug fix display of PerfMon log's num long loops
2014-03-08 15:17:03 +09:00
Randy Mackay
54e131cf1f
Copter: re-enable CLI for Pixhawk
2014-03-08 15:17:02 +09:00
Randy Mackay
6efc26d3a6
Copter: restore mount's mode to default after ROI completes
2014-03-05 16:02:14 +09:00
Randy Mackay
7992a1a7d3
Copter: disable the CLI by default
...
This is unfortunate but master's flash size is over the APM2 limit
2014-03-05 12:03:56 +09:00
Randy Mackay
4f963e7795
Copter: move report_compass out of the CLI
...
This function is also used by compassmot. Having it strictly part of
the CLI causes a compile error when the CLI is disabled
2014-03-05 12:01:45 +09:00
Randy Mackay
00f9843e40
Copter: remove CLI tests for gps, logging, radio
...
Required to shrink the firmware down so that it can fit on the APM2
boards
2014-03-05 11:44:09 +09:00
Randy Mackay
fc85228d09
Copter: remove CLI set
...
Frees about 1k of flash
2014-03-04 22:23:57 +09:00
Randy Mackay
3a934357e9
Copter: remove unused reset_land_detector
2014-03-04 22:23:55 +09:00
Randy Mackay
c56f521897
Copter: ch6 tuning of RC_FEEL_RP
2014-03-04 22:23:53 +09:00
Randy Mackay
e89600afe3
Copter: integrate smoothing gain into flight modes
2014-03-04 22:23:52 +09:00
Randy Mackay
3910ab807f
Copter: replace input filtering with smoothing gain
2014-03-04 22:23:50 +09:00
Randy Mackay
429e8d5e50
Copter: integrate AttControl feel param
2014-03-04 22:23:49 +09:00
lthall
a9db399f60
Copter: integrate AttControl input shaping
2014-03-04 21:52:20 +09:00
Andrew Tridgell
86fa82f767
Copter: only send GPS2_RAW when we have a 2nd GPS
2014-03-03 07:05:47 +11:00
Andrew Tridgell
3de574e5dc
Copter: disable GPS2 in HIL
2014-02-27 08:16:20 +11:00
Andrew Tridgell
37394b30ee
Copter: added support for 2nd GPS
2014-02-26 09:40:29 +11:00
Andrew Tridgell
2fcbdc4056
Copter: pass fix type to gps->setHIL()
2014-02-25 21:11:10 +11:00
Andrew Tridgell
ffcc77a21f
Copter: fix for HIL API change
2014-02-23 08:18:20 +11:00
Randy Mackay
d992483bf5
Copter: add EKF params to full param list
2014-02-21 13:51:22 +09:00
Randy Mackay
797212c7ab
Copter: remove remnant of cli compassmot
2014-02-19 16:04:10 +11:00
Randy Mackay
2457dbf0cd
Copter: more checks before starting compassmot
...
additional checks that copter is landed and that compassmot calibration
isn't already being performed.
Returns ACK to ground station as process begins
2014-02-19 16:04:03 +11:00
Andrew Tridgell
76b60a1a52
Copter: added compassmot over MAVLink
...
use the MAVLink interact code to allow for compassmot over MAVLink
Pair-Programmed-With: Randy Mackay <rmackay9@yahoo.com>
2014-02-19 16:04:00 +11:00
Andrew Tridgell
a45d77f893
Copter: set the ahrs.set_armed() flag
2014-02-19 10:53:44 +11:00
Andrew Tridgell
0cbe64bc5e
Copter: use Log_Write_Baro()
...
this gives the raw pressure and temperature, which is useful for
analysis, plus allows for more accurate log replay
2014-02-19 09:22:45 +11:00
Randy Mackay
fdae812814
Copter: DO_SET_ROI persists across waypoints
...
Users should add a DO_SET_ROI command with zero lat, lon and alt to
restore the yaw control to the default control (which is normally
look-at-next-wp)
2014-02-18 21:36:02 +09:00
Randy Mackay
bf68edd01c
Copter: bug fix to 50hz logging rate
...
Caught by Emile Castelnuovo
2014-02-17 22:25:02 +09:00
Randy Mackay
d9b7559379
Copter: remove duplicate #define from APM_Config.h
2014-02-17 16:44:47 +09:00
Randy Mackay
4e1c51aa65
Copter: bug to disarm at end of mission
2014-02-17 16:43:49 +09:00
Andrew Tridgell
ce66314f40
Copter: fixed HIL build on PX4
2014-02-17 12:34:34 +11:00
proficnc
bbf5c11c8a
Update Parameters.pde
...
Moved Disabled to the bottom of the drop-down box for selecting logging types.
This is to reduce the potential for someone to accidentally select Disabled when they intend on selecting Default.
2014-02-17 10:02:45 +11:00
Randy Mackay
00913ffe1b
Copter: throttle rate to simple P controller
...
Saves at least 15bytes of RAM
2014-02-16 13:35:40 +11:00
Randy Mackay
9444ba7ea8
TradHeli: init roll/pitch input filter
2014-02-16 13:35:33 +11:00
Randy Mackay
b259510095
Copter: init roll/pitch input filters
2014-02-16 13:35:30 +11:00
Andrew Tridgell
9c66dd0d2c
Copter: change to Compass::learn_offsets
2014-02-16 13:22:13 +11:00
Randy Mackay
aab9b30bf6
Copter: replace APM_PI with AC_P
...
Saves about 90bytes of RAM
2014-02-15 06:09:08 +11:00
Randy Mackay
3f10a84a2a
Copter: remove accel calibration from cli
...
Also remove compass, flight mode, optical flow, radio and ch6 tuning
knob setup from cli to free up 3.5k of flash
2014-02-15 06:09:08 +11:00
Randy Mackay
3ccd1ad170
Copter: integrate AttControl method name changes
2014-02-15 06:09:08 +11:00
Randy Mackay
6880a6db80
TradHeli: integrate AttControl method name changes
2014-02-15 06:09:08 +11:00
lthall
7ed5080dc9
Copter: simplify get_angle_targets_for_reporting
2014-02-15 06:09:08 +11:00
lthall
41dcfae7c0
AC Acro and Sport: Angle limit code update
2014-02-15 06:09:08 +11:00
Andrew Tridgell
ebf6d47830
Copter: disable direct tuning, we need accessors for this
2014-02-15 05:48:24 +11:00
Andrew Tridgell
2fbdf7f718
Copter: fixed build for AHRS API changes
2014-02-15 05:48:22 +11:00
Andrew Tridgell
a8dc1be4de
Copter: fixed non-EKF copter build
2014-02-15 05:48:21 +11:00
Randy Mackay
20989fd5e9
Copter: allow ch6 tuning of EKF
2014-02-15 05:48:20 +11:00
Andrew Tridgell
86afd13f12
Copter: use GPS AIRBORNE_4G
2014-02-15 05:48:17 +11:00
Andrew Tridgell
a112694a50
Copter: added AUX switch option for enable/disable EKF
2014-02-15 05:48:17 +11:00
Andrew Tridgell
5606e2f4a7
Copter: enabled EKF and SIMSTATE flash logging
2014-02-15 05:48:16 +11:00
Andrew Tridgell
6a9189a6a5
Copter: enable AHRS2 mavlink message
2014-02-15 05:48:16 +11:00
Andrew Tridgell
99b3517a47
Copter: use AP_InertialNav_NavEKF when available
2014-02-15 05:48:15 +11:00
Andrew Tridgell
686d1b9124
Copter: changes set_home_position() to setup_home_position() for Inav
2014-02-15 05:48:15 +11:00
Andrew Tridgell
c6e25483b4
Copter: use a common home with AHRS
2014-02-15 05:48:15 +11:00
Andrew Tridgell
9cc00d20eb
Copter: fixed for removed DCM blowup counts
2014-02-15 05:29:48 +11:00
Andrew Tridgell
79a29d12f2
Copter: fixed build for new AHRS API
2014-02-15 05:29:47 +11:00
Andrew Tridgell
af5a3dff93
Copter: enable use of AHRS_NavEKF
2014-02-15 05:29:47 +11:00
Andrew Tridgell
24f2ac20de
Copter: removed HIL_MODE_ATTITUDE
...
this really can't work any more, as AHRS can't support it
2014-02-15 05:29:46 +11:00
Andrew Tridgell
644bf71f56
Copter: fixed build for InertialNav change
2014-02-15 05:29:46 +11:00
Randy Mackay
006cf58b2d
Copter: fix merge error for g.angle_max
2014-02-15 05:27:51 +11:00
Randy Mackay
5e8fede19e
Copter: comment fix to Attitude.pde
2014-02-15 05:27:50 +11:00
Randy Mackay
aa79e22ce0
Drift: bug fix for throttle
2014-02-15 05:27:50 +11:00
Randy Mackay
10a0303706
Copter: smooth throttle transition between flight modes
2014-02-15 05:27:50 +11:00
Randy Mackay
0df1dc267b
Copter: integrate WPNav constructor change
2014-02-15 05:27:50 +11:00
Randy Mackay
1b8055aed9
Copter: remove unused t7 const
...
Saves 4 bytes
2014-02-15 05:27:49 +11:00
Randy Mackay
2b3995ccb5
Copter: integrate refs for RC_Channels in motor defs
2014-02-15 05:27:49 +11:00
Randy Mackay
9f78f65413
TradHeli: integrate leonard's control_acro fixes
2014-02-15 05:27:49 +11:00
Randy Mackay
bf6bb59cb4
Copter: Leonard's control_acro fixes
...
get_pilot_desired_angle_rates returns bf rate targets as floats
2014-02-15 05:27:49 +11:00
Randy Mackay
6380a39d3a
Copter: remote update_trig from main code
2014-02-15 05:27:48 +11:00
Randy Mackay
75b20bde7c
Copter: control_acro, drift use trig from ahrs
2014-02-15 05:27:48 +11:00
Randy Mackay
aa4c3eaffe
Copter: resolve RTL state compiler warnings
2014-02-15 05:27:48 +11:00
Randy Mackay
12a4ce70fd
Copter: remove control_roll, pitch, yaw variables
2014-02-15 05:27:47 +11:00
Randy Mackay
2c1ec9d0c0
Copter: remove control_roll, pitch, yaw from control files
2014-02-15 05:27:47 +11:00
Randy Mackay
e8c4e8a472
Copter: integrate get_angle_target_for_reporting
...
Used for logging and sending to GCS
2014-02-15 05:27:47 +11:00
Randy Mackay
d579325e2a
Copter: add get_angle_targets_for_reporting
...
This returns the current earth frame roll, pitch and yaw targets which
can depend upon the flight mode
2014-02-15 05:27:47 +11:00
Randy Mackay
1acd33e290
Copter: do_yaw takes yaw target from AttControl
2014-02-15 05:27:47 +11:00
Randy Mackay
ea1158a9d5
Copter: remove unused config
2014-02-15 05:27:47 +11:00
Randy Mackay
9ef3fd850f
Copter: remove use of SUPER_SIMPLE definition
2014-02-15 05:27:47 +11:00
Randy Mackay
b37b0c5061
TradHeli: remove use of throttle_mode
2014-02-15 05:27:47 +11:00
Randy Mackay
b0673d693b
Copter: move set_mode, to flight_mode.pde
2014-02-15 05:27:47 +11:00
Randy Mackay
b8bb477731
Copter: add flight_mode.pde
2014-02-15 05:27:47 +11:00
Randy Mackay
38d5148b99
Copter: remove reset_I_all
...
Each controller should reset the I terms as needed
2014-02-15 05:27:47 +11:00
Randy Mackay
72a3f14561
Copter: move reset_optflow_I to control_ofloiter
2014-02-15 05:27:46 +11:00
Randy Mackay
7afa0a767c
Copter: correct circle rate tuning to use circle_nav
2014-02-15 05:27:46 +11:00
Randy Mackay
3e399fd830
Copter: remove unused parameters
2014-02-15 05:27:46 +11:00
Randy Mackay
81c7df7678
Copter: comment fix
2014-02-15 05:27:46 +11:00
Randy Mackay
0e0d02cd6d
Copter: remove unused init from sport mode
2014-02-15 05:27:46 +11:00
Randy Mackay
3d926a6943
Copter: GCS_Mavlink gets gyro direct from imu
2014-02-15 05:27:46 +11:00
Randy Mackay
f46ff2b44e
Copter: remove unused defines
2014-02-15 05:27:46 +11:00
Randy Mackay
fe26af86de
Copter: crash check works with flip flight mode
2014-02-15 05:27:46 +11:00
Randy Mackay
22280e1c57
Copter: integrate surface_tracking to control_althold
2014-02-15 05:27:46 +11:00
Randy Mackay
3824f528ea
Copter: get angle_boost direct from pos_control
2014-02-15 05:27:46 +11:00
Randy Mackay
90c5fe4be4
Copter: surface_tracking takes current_alt_target param
2014-02-15 05:27:46 +11:00
Randy Mackay
989a03a643
Copter: remove unused flags and variables
2014-02-15 05:27:45 +11:00
Randy Mackay
174318a2a9
Copter: remove set_nav_mode
2014-02-15 05:27:45 +11:00
Randy Mackay
aedb4136de
Copter: update_thr_cruise removed from control_stabilize
2014-02-15 05:27:45 +11:00
Randy Mackay
223c6fd4de
Copter: remove deadwood, update_thr_cruise always runs
2014-02-15 05:27:45 +11:00
Randy Mackay
2870d043f8
Copter: remove unused drift.pde
...
moved to control_drift.pde
2014-02-15 05:27:45 +11:00
Randy Mackay
1cd678f684
Copter: compiler warning for control_autotune
2014-02-15 05:27:45 +11:00
Randy Mackay
d3a126d078
Copter: integrate slew_yaw into control_auto
2014-02-15 05:27:45 +11:00
Randy Mackay
364946cb7f
Copter: AttControl param prefix shortened to ATC
2014-02-15 05:27:45 +11:00
Randy Mackay
814157324d
Copter: APM_Config AUTOTUNE_ENABLED
2014-02-15 05:27:45 +11:00
Randy Mackay
89a50ed445
Copter: comment fix for control_stabilize
2014-02-15 05:27:45 +11:00
Randy Mackay
0107b2a95d
Copter: remove unused auto_tune.pde
2014-02-15 05:27:44 +11:00
Randy Mackay
aec67cd3df
Copter: integrate control_autotune
2014-02-15 05:27:44 +11:00
Randy Mackay
823485f763
Copter: add control_autotune.pde
2014-02-15 05:27:44 +11:00
Randy Mackay
b87852ee2e
Copter: remove unused flip.pde
2014-02-15 05:27:44 +11:00
Randy Mackay
d90d3d8dca
Copter: integrate control_flip
2014-02-15 05:27:44 +11:00
Randy Mackay
47deb795bd
Copter: add control_flip
2014-02-15 05:27:44 +11:00
Randy Mackay
1648ecc6e5
Copter: bug fix for heli_control_acro throttle
2014-02-15 05:27:44 +11:00
Randy Mackay
c73c9f03a5
Copter: bug fix for control_acro throttle
2014-02-15 05:27:44 +11:00
Randy Mackay
164bd10ef0
TradHeli: init targets when entering acro
2014-02-15 05:27:44 +11:00
Randy Mackay
fdf41219ca
Copter: init targets when entering acro
2014-02-15 05:27:44 +11:00
Randy Mackay
9f33873b2e
Copter: typo in control_acro.pde
2014-02-15 05:27:44 +11:00
Randy Mackay
ec989c720c
Copter: integrate heli_control_acro
2014-02-15 05:27:43 +11:00
Randy Mackay
5aaa01ab30
TradHeli: heli_control_acro
2014-02-15 05:27:43 +11:00
Randy Mackay
922dff0514
Copter: integrate heli_control_stabilize
2014-02-15 05:27:43 +11:00
Randy Mackay
41ab2547d7
Copter: control_stabilize remove takeoff_complete
2014-02-15 05:27:43 +11:00
Randy Mackay
bca309eb1e
Copter: replace takeoff_complete with landed_complete
2014-02-15 05:27:43 +11:00
Randy Mackay
2940688301
TradHeli: heli_control_stabilize
2014-02-15 05:27:43 +11:00
Randy Mackay
91124bcf8b
TradHeli: remove get_heli_rate_yaw from main code
2014-02-15 05:27:43 +11:00
Randy Mackay
3b0de0d23d
Copter: integrate trad heli AttControl
2014-02-15 05:27:43 +11:00
Randy Mackay
ef666c73ab
Copter: remove Position mode
2014-02-15 05:27:42 +11:00
Randy Mackay
c632211c8c
Copter: get_of_roll, get_of_pitch moved to control_ofloiter
2014-02-15 05:27:42 +11:00
Randy Mackay
837061fd65
Copter: control_ofloiter added
2014-02-15 05:27:42 +11:00
Robert Lefebvre
c561d6bb9e
Small comment change.
2014-02-15 05:27:42 +11:00
Randy Mackay
54be8402a2
Copter: integrate control_guided
2014-02-15 05:27:42 +11:00
Randy Mackay
798add0b5c
Copter: remove guided from control_auto.pde
2014-02-15 05:27:42 +11:00
Randy Mackay
0e41b01ad0
Copter: control_guided added
2014-02-15 05:27:41 +11:00
Randy Mackay
245bcd7c2c
Copter: removed althold, drift, sport from control_stabilize
2014-02-15 05:27:41 +11:00
Randy Mackay
d85c57999d
Copter: althold moved to control_althold.pde
2014-02-15 05:27:41 +11:00
Randy Mackay
2e6327be06
Copter: sport moved to control_sport.pde
2014-02-15 05:27:41 +11:00
Randy Mackay
70c8b622e2
Copter: drift moved to control_drift
2014-02-15 05:27:41 +11:00
Randy Mackay
212ced63f6
Copter: bug fix for do_loiter_time alt target
2014-02-15 05:27:41 +11:00
Randy Mackay
37bde3406d
Copter: remove comments
2014-02-15 05:27:41 +11:00
Randy Mackay
70d1e53b74
Copter: commands_logic to use auto_rtl
2014-02-15 05:27:41 +11:00