Commit Graph

256 Commits

Author SHA1 Message Date
Matt 41f2e8869e FRAME_PARAMS: Solo mag and arming param update
Updates the arming check to all
Updates the required compass parameters
Updates the compass_typemask to disable the LIS3MDL
2017-12-23 10:58:03 +09:00
murata 0934bdb5dc Tools: remove default values from eLAB 445 params 2017-11-16 22:48:13 +09:00
Jacob Walser 83bb1e7f4a Frame_params: (BlueROV2/Sub-3.5.2) update tilt servo reversal 2017-11-14 18:10:45 -05:00
Jacob Walser 305f203dd3 Frame_params: (BlueRov2/Sub-3.5.2) Reset to defaults 2017-11-13 21:08:55 -05:00
Jacob Walser 67eefe3d6a Frame_params: (BlueRov2/Sub-3.5.2) Use integers for APInts 2017-11-13 20:57:43 -05:00
Jacob Walser acb65b99ac Frame_params: add file for BlueROV2 on Sub 3.5.2 2017-11-13 15:42:04 -05:00
TsuyoshiKawamura 3467be6695 Tools: update eLAB-445 parameter file 2017-11-01 14:07:43 +09:00
Andrew Tridgell 3a78255e54 Frame_Params: added WLToys V383 parameters
for HeliQuad frame
2017-10-03 10:16:41 +11:00
Lucas De Marchi 015242c89b Tools: add params for Aero Compute Board
These are the parameter for Aero Compute Board to fly Intel Aero RTF
without the flight controller, using just the internal sensors
on the Linux side.
2017-09-21 07:59:20 -07:00
Randy Mackay ebea292d63 Tools: add frame params for eLAB 470 quad 2017-09-13 17:55:05 +09:00
Jacob Walser 19086e34f0 Frame_params: update BlueROV2 defaults for 3.5.1 2017-08-30 17:49:34 -04:00
Andrew Tridgell 224dc439ab Tools: updated parameters to remove ELEVON and VTAIL settings 2017-08-01 08:25:32 +10:00
Matt 3fd393bc21 FRAME_PARAMS: Solo final parameters for AC 3.5.0+
This is the final list of parameters the Solo requires for ArduCopter
3.5.0+ that differ from ArduCopter 3.5.0 defaults.  I ran a
`mavparmdiff` on the defaults vs Solo to generate this list.  I added
`FRAME_TYPE` back even though it is default just because it is rather
critical. I removed all the parameters that are individual vehicle
specific (calibrations, pressure, etc).
2017-07-17 09:09:35 +09:00
Randy Mackay 59503f15cb Tools: update eLAB VEK AI parameters 2017-06-29 16:14:15 +09:00
Randy Mackay bee666cd7a Tools: update eLAB VEK rover param file 2017-06-28 15:40:21 +09:00
murata 0a57177cee Tools: eLab LAB445 parameter file 2017-06-28 10:26:25 +09:00
Randy Mackay d934088660 Tools: update realflight simulator params 2017-06-26 17:28:48 +09:00
Randy Mackay 62903b7639 Tools: add realflight standard params 2017-06-26 13:08:05 +09:00
Randy Mackay e6f1e14b61 Tools: fix eLab VEK parameter file 2017-06-24 13:29:59 +09:00
Randy Mackay 58dd0592ad Tools: eLAB VEK default param update
We should always require arming, thanks @khancyr for noticing this!
2017-06-21 18:20:59 +09:00
Randy Mackay f8ee82e708 Tools: remove old 3DR standard param files 2017-06-21 15:16:49 +09:00
Randy Mackay 0037ec086a Tools: rename param files for eLAB 2017-06-21 15:08:38 +09:00
Randy Mackay 3159361970 Tools: add param file for eLAB VEK AI rover 2017-06-21 15:08:38 +09:00
Randy Mackay 32cb3f8764 Tools: add e-flight convergence parameter file 2017-06-12 09:41:33 +09:00
Jacob Walser 1a52acc99e Frame_params: Remove calibration parameters from bluerov2 standard 2017-05-27 11:30:56 -04:00
Jacob Walser 193e590592 Frame_params: add standard bluerov2 parameter file 2017-05-27 11:30:56 -04:00
Andrew Tridgell fd6625e09d Frame_params: drop target temp for Solo to 45 2017-05-24 08:41:16 +10:00
Lucas De Marchi cacfc4cb2f Tools: set mavlink log backend for Intel Aero RTF 2017-04-22 10:58:26 +09:00
Randy Mackay 3df5484a39 Tools: update intel aero default params
Increase expected barometer noise, reduce roll gains
2017-04-20 14:07:03 +09:00
Randy Mackay 56281f9c79 Tools: update intel aero default params 2017-04-20 10:58:11 +09:00
Randy Mackay 41d999994a Tools: update intel aero rtf default parameters 2017-04-18 20:32:36 +09:00
Matt 29adf300ee Tools: update default Solo parameters running AC3.5 2017-04-18 11:00:26 +09:00
Randy Mackay 835aa56777 Tools: intel aero params enable failsafes 2017-04-15 18:39:13 +09:00
Andrey Kolobov 2ed63d24bd XPlane: adding airfoils required to for XPlane
needed to load some of the RC sailplane models used for SITL
2017-04-10 19:11:24 +10:00
Lucas De Marchi 2ff720f99f Frame_params: add default params for Intel Aero RTF 2017-03-24 12:06:19 +11:00
Randy Mackay e3bca10e9a Tools: fix Solo param file name 2017-03-14 11:36:08 +09:00
Randy Mackay 6e47eaf3c2 Tools: initial Solo default params
These are not perfect but it's a start
2017-03-14 11:10:19 +09:00
Randy Mackay c9ff028ec3 Tools: update IRIS param file for AC3.5 2017-02-28 16:43:09 +09:00
Randy Mackay cc67335b26 Tools: update EnRoute frame parameters 2017-02-28 14:09:41 +09:00
Julien Beraud a5523a4b94 Frame_Params: Remove unexisting param
FRAME has disappeared and causes a crash at startup
2017-01-23 21:23:16 +11:00
Mathieu OTHACEHE 4daa4e9df9 Tools: remove deleted parameters
RCx_REV and SERVO_RNG_ENABLE no longer exists, they need to be erased
from param files.
2017-01-13 20:19:30 +11:00
Randy Mackay 07e5b43132 Tools: add FRAME_CLASS to bebop parameter files 2017-01-13 07:46:27 +09:00
Andrew Tridgell 7c058c922f Tools: removed ARSPD_ENABLE parameters 2016-12-05 16:51:49 -08:00
Randy Mackay 3576d06638 Tools: EX700 proximity ignores legs 2016-11-26 11:39:26 +09:00
Randy Mackay 7e031262c3 Tools: remove duplicate from Bebop2 params file 2016-11-07 09:54:58 +09:00
Randy Mackay d9e476c96f Tools: Bebop2 param get radio failsafe
put params in alphabetical order
2016-11-07 09:53:37 +09:00
Randy Mackay fb47480b51 Tools: Bebop params get ground effect compensation
Also put in alphabetical order
2016-11-07 09:52:41 +09:00
Randy Mackay b34c14ef67 Tools: update EX700 parameter file
swapped around lidar, TX1 and SF40c input channels
2016-11-05 17:10:40 +09:00
Randy Mackay c19ef757ef Tools: add IRIS AC3.4 params file 2016-11-03 12:38:56 +09:00
Mathieu OTHACEHE 5e42800b5e Disco: add LED support
Use RGBLed generic implementation to support Disco LED.
2016-10-26 11:56:11 -03:00
Francisco Ferreira 79cb4ea595 Tools: set Disco battery capacity in frame parameters 2016-10-24 09:24:11 -03:00
Francisco Ferreira 832fec68b7 Tools: set Bebop battery capacity in frame parameters 2016-10-24 09:24:11 -03:00
Mathieu OTHACEHE 01804063f6 Disco: set SCHED_LOOP_RATE to 200
Video stabilization on stock firmware requires main loop to run at
200Hz.
2016-10-20 09:07:54 -03:00
Mathieu OTHACEHE 6ccbbb0074 Disco: set WP_LOITER_RAD to 30
Use the same value for LOITER radius as in stock autopilot.
2016-10-20 09:07:54 -03:00
Mathieu OTHACEHE 352551a239 Bebop2: Remove CR in param file.
Remove CR in Parrot_Bebop2.param line endings.
2016-10-20 09:07:07 -03:00
Andrew Tridgell 227bd3d13c Frame_params: enabled FS_THR_ENABLE on Bebop and Bebop2 2016-10-18 21:00:13 +11:00
Andrew Tridgell fe3d57b19c Frame_params: fixed scaling errors in Bebop parameters 2016-10-18 08:28:58 +11:00
Andrew Tridgell 16bd04ba7e Tools: update frame parameters for Disco
use new SERVO_RNG_ENABLE option. This makes tuning independent of the
users R/C settings
2016-10-15 16:59:37 +11:00
Andrew Tridgell 19d580d60f Disco: adjust default Disco parameters 2016-09-16 19:31:28 +10:00
Andrew Tridgell dd3d5152f6 Frame_params: added more Disco info 2016-09-15 18:17:09 +10:00
Andrew Tridgell 94460949e1 Frames: added Parrot Disco parameters 2016-09-15 18:09:35 +10:00
Randy Mackay e4efa4c07c Tools: EnRoute EX700 param file gets flow orientation 2016-08-31 10:34:26 +09:00
Randy Mackay 4fbc686e68 Tools: EnRoute EX700 params get SF10b 2016-08-29 21:06:50 +09:00
Randy Mackay 28715106d6 Tools: update Bebop2 parameter gains 2016-08-26 09:12:48 +09:00
Randy Mackay 29e18dba5b Tools: add battery failsafe to EnRoute EX700 param file 2016-08-25 13:07:56 +09:00
Randy Mackay 65ee71075c Tools: set GND_EFFECT_COMP for Bebop2 params 2016-08-09 16:19:53 +09:00
Randy Mackay 650d6756bf Tools: update EnRoute EX700 parameter defaults 2016-08-05 16:26:36 +09:00
Randy Mackay 3b86ef71ca Tools: update EnRoute EX700 parameters 2016-08-04 16:56:46 +09:00
Randy Mackay de24d2ca3b Tools: add EnRoute EX700 frame parameters 2016-08-04 14:37:14 +09:00
Julien Beraud fdb43fdc6a Frame_Params: fix param name for bebop
Change-Id: Id1c16e11e68f0004019afc885acf0e0f119b78b7
2016-07-15 12:25:17 -03:00
Julien Beraud 3897e03d39 Frame_params: fix Bebop param names
Broken by AP_Motors refactoring
2016-05-04 10:09:31 +09:00
Randy Mackay e78595bf48 Frame_Params: remove defaults from Bebop2 params
Removed parameter values that should already be these values by default on a fresh install
2016-01-23 11:42:13 +09:00
Julien BERAUD 90d266698d Frame_Params: Bebop 2 tuning by Leonard 2016-01-22 13:58:46 -02:00
Julien BERAUD b8aef20ee8 Frame_Params: Fix bebop compass orient
Without COMPASS_EXTERNAL set to 1, COMPASS_ORIENT wasn't taken
into account, leading to bad data
2016-01-13 19:17:27 -02:00
Julien BERAUD e22fe34259 Params: add arming check for bebop
Taken from bebop 2
2015-12-22 16:50:27 -02:00
Randy Mackay 4f612f5d69 Frame_params: Bebop2 parameters
Rate PIDs are taken from original bebop which are slightly too high
2015-12-14 11:51:34 +09:00
Randy Mackay 8be0f9371f Frame_params: update recommended Bebop parameters 2015-12-14 11:49:00 +09:00
orlando3d 6d266d2063 Update 3DR_X8-M_RTF.param 2015-10-18 09:27:54 +09:00
orlando3d 7c0239e59c Update 3DR_X8+_RTF.param 2015-10-18 09:27:51 +09:00
orlando3d 11ae5a64d0 Update 3DR_Iris+.param 2015-10-18 09:27:49 +09:00
Leonard Hall 041dd3c855 Frame: new Bebop default parameters 2015-10-08 12:21:14 +09:00
Leonard Hall 1f287da70b Tools: first draft Parrot Bebop parameters 2015-09-12 12:53:43 +09:00
Randy Mackay 08466d34e8 Frame: add SToRM32 gimbal parameters
These parameters can be used to configure ardupilot to control a SToRM32
3-axis gimbal attached to Pixhawk Telem2 port using the MAVLink
protocol.  Gimbal Tilt is controlled using the RC6 input
2015-06-02 14:49:40 +09:00
Randy Mackay cebd578403 Frame Params: remove unused Advanced, Beginner 2015-04-21 10:44:26 +09:00
Randy Mackay f225558dbd IRIS params: update RATE_PIT_IMAX to 1000 2015-02-02 17:59:52 +09:00
Craig Elder 324473a15b Frame_params: Updating 3DR_X8_RTF.param for Copter 3.2 2014-11-14 18:03:29 -08:00
Craig Elder 5ea947de2f Frame_params: Updating 3DR_X8-M_RTF for Copter 3.2 2014-11-14 17:56:56 -08:00
Craig Elder e3d6b25301 Frame_params: Updated 3DR_X8+_RTF 2014-11-14 13:52:38 -08:00
Craig Elder 5df3d24c77 Frame_params: 3DR_X8+_RTF.param
Adding param file for 3DR X8+
2014-10-28 19:33:44 -07:00
Craig Elder df16dd67d2 Frame_params: 3DR_Iris+.param
Add GPS_HDOP_GOOD
2014-10-23 17:05:08 -07:00
Craig Elder adf741b959 Frame_params: Updated 3DR_X8-M_RTF.param 2014-10-07 15:00:57 -07:00
Craig Elder 5b23f81e2b Frame_params: Updating 3DR_X8-M_RTF.param 2014-10-06 16:07:49 -07:00
Craig Elder 5d7ec98d7a Frame_params: Adding 3DR_X8-M_RTF.param 2014-10-06 15:44:35 -07:00
Craig Elder 41ce8c2abd Frame_params: 3DR_Iris+
Decreased ATC_RATE_RP_MAX to 18000
2014-10-06 12:17:52 -07:00
Craig Elder ab46f2d2fe Frame_params: 3DR_Iris+ reduced WP_NAV to 650 2014-09-24 13:43:52 -07:00
Craig Elder 3f687733e6 Frame_params: added 3DR_AERO_M.param 2014-09-17 18:48:48 -07:00
Craig Elder da66c7df36 Frame_params: 3DR_Aero_RTF.param Changed tuning 2014-09-17 18:46:52 -07:00
Craig Elder 4c38f51337 Frame_Parameters: 3DR_Iris+ changed mode switch configuration 2014-09-16 00:12:40 -07:00
Craig Elder d26173bf81 Frame_params: Updated 3DR Iris+ 2014-09-11 23:05:28 -07:00
Craig Elder 6e79ab8478 Frame_params: Added Frsky telemetry to 3DR_Iris+.param 2014-09-10 13:30:59 -07:00
Craig Elder 5fae3638dc Frame_params: Updated 3DR_Iris+ 2014-09-10 10:54:06 -07:00
Craig Elder a6db3586f6 Frame_params: Removed Iris with 3 Position Mode Switch.param 2014-09-09 18:55:34 -07:00
Craig Elder e6b2726738 Frame_params: 3DR_Iris+.parm 2014-09-09 12:36:04 -07:00
Craig Elder 2f2665c022 Frame_params: Updated 3DR_Iris+.param 2014-09-09 00:36:06 -07:00
Craig Elder df82e0accc Frame_Params: Added 3DR Iris+ 2014-09-08 12:40:10 -07:00
Craig Elder a57818dfc8 Frame_parameters: Updated Iris with 3 Position Mode Switch 2014-09-04 11:49:02 -07:00
Craig Elder 21e4144b29 Frame_params: Updated Iris with 3 Position Mode Switch 2014-09-03 16:47:18 -07:00
Craig Elder 0ab3e40e92 Frame Parameters: Updated Mode Switch order 2014-08-21 13:34:42 -07:00
Craig Elder 27a7ea2766 Frame Parameters: 3DR Aero RTF 2014-08-18 15:33:34 -07:00
Craig Elder b0d26d9ace * Frame Parameters: 3DR AERO RTF
Updated RLL2SRV_P parameter
2014-08-15 12:18:49 -07:00
Craig Elder 926d57698d Frame Parameters: 3DR AERO RTF
Updated 3DR AERO RTF parameters
2014-08-14 18:37:29 -07:00
Craig Elder 7d152cbbf2 Frame_params: Added Iris with 3 Positon Mode Switch.param 2014-07-29 17:27:37 -07:00
Craig Elder 972a2403ed Frame_params: Added Iris with Front Mount Go Pro 2014-05-19 16:47:41 -07:00
Craig Elder 32a1fac612 Frame_params: Removed TRIM_AUTO,1 2014-05-06 14:53:53 -07:00
Kevin Hester 25f9a469e6 Tools: fixup line endings 2014-04-15 15:55:15 +09:00
Craig Elder be51a68701 3DR_Aero_RTF: Changed the name from 3DR_Skywalker_RTF 2014-04-08 00:19:18 -07:00
Craig Elder 428dcdb817 Frame_params: Updated Iris.param 2014-03-19 19:49:27 -07:00
Craig Elder 2131d9923f Frame_params: Added Iris with Tarot Gimbal 2014-03-19 19:48:44 -07:00
Craig Elder 7be2cea42f Frame_params: Adding 3DR_Rover.param 2014-03-18 13:27:27 -07:00
Craig Elder 0a33e69787 Frame_params: Updated tilt angles for Tarot Gimbals 2014-03-08 11:03:25 -08:00
Craig Elder 5a80ae0f61 Frame_params: Updated 3DR Iris for Tarot Gimbal 2014-03-07 18:27:13 -08:00
Craig Elder 74bd5f9e40 Frame_params: Updated 3DR Y6B for Tarot Gimbal 2014-03-07 18:26:07 -08:00
Craig Elder 70ca616696 Frame_params: Updated 3DR X8 for Tarot Gimbal 2014-03-07 18:23:00 -08:00
Craig Elder df51b3025b Frame_params: Updated 3DR Quad for Tarot Gimbal 2014-03-07 18:22:09 -08:00
Craig Elder 2869d6fd08 Frame_Parameters: Added Skywalker 2014-03-07 18:20:47 -08:00
Craig Elder aa5a098adb Iris:parameter adjustments 2014-02-13 14:11:55 -08:00
Craig Elder f2a318e057 Iris: Updated Parameter file 2014-02-12 21:16:00 -08:00
Craig Elder e334e92e27 Iris:Updated Parameters 2014-02-12 19:46:00 -08:00
Craig Elder 32f5a1ac94 Iris: Updated gimbal configuration 2014-02-07 18:29:51 -08:00
grant3DR 31f6e3c63b Update 3DR_X8_RTF.param
Updated RATE_PIT_(P,I,D), RATE_RLL_(P,I,D), RATE_YAW_(P,I,D), THR_MID, and STB_(PIT, RLL, and YAW) to autotuned param values

Grant Lieberman
3D Robotics
2014-02-07 22:32:48 +09:00
Randy Mackay 058e058487 Frame Params: 3dr tarot gimbal params 2014-02-04 21:52:25 +09:00
Craig Elder 43cf3fc38f 3DR_Y6A_RTF: Adding frame type 2014-02-03 14:31:32 -08:00
Craig Elder 42a87ab9c9 3DR_RTF frame changes 2014-02-03 13:39:47 -08:00
Craig3DRobotics b2c5e12fb4 3DR_QUAD_X4_RTF: Added to standard frame types 2014-01-31 19:27:27 -08:00
Craig3DRobotics 27ed18d4c6 3DR_X8_RTF: Adding the 3DR X8 RTF copter 2014-01-31 18:21:02 -08:00
Craig3DRobotics 17cc0e88c5 3DR_Y6B_RTF: Updated for FlySky TX 2014-01-31 17:42:45 -08:00
Craig3DRobotics a457322091 3DR_Y6B_RTF: added to standard frames 2014-01-31 15:46:07 -08:00
Craig3DRobotics 9653f4e516 Iris: Add Pitch Settings for gimbal 2013-12-26 22:51:52 -08:00
Randy Mackay 9d4e0a216f Copter: parameter files for beg, int, adv and camera ship 2013-11-13 22:57:08 +09:00
Randy Mackay 80131ce7cc Iris: remove ATTTITUDE_FAST, PID and OPTFLOW logging 2013-11-12 11:40:03 +09:00
Craig3DRobotics 42aeead047 Iris: Enable logging of all message types 2013-11-06 15:41:52 -08:00
Craig3DRobotics 2593144b69 Iris: Updated Pitch parameters and added IMU logging 2013-10-18 11:44:36 -07:00
Craig3DRobotics 94e707094a Iris: Changed Flight Modes 2013-10-15 15:38:34 -07:00
Craig3DRobotics 6ffd84b0bd Iris: Set FS_BATT_VOLTAGE 2013-10-11 16:13:12 -07:00
Craig3DRobotics 473689d945 Iris: Update flight modes 2013-10-11 15:28:53 -07:00
Randy Mackay dd53677a3c Iris: enable Altitude fence by default 2013-10-10 11:49:08 +09:00
Randy Mackay a660e3ebef Iris: enable throttle failsafe
Set to always RTL
2013-10-10 11:38:17 +09:00
Randy Mackay 0d56a26cb4 Iris: fix typo in param file 2013-10-10 11:14:46 +09:00
Craig3DRobotics b8f1289fce Iris: Updated Parameter file for rc3 2013-10-09 15:34:26 -07:00
Craig3DRobotics 7e819a52a7 Iris: Change Flight Modes 2013-09-20 13:46:38 -07:00