Commit Graph

1742 Commits

Author SHA1 Message Date
Peter Barker 4f0d301edb GCS_MAVLink: move defaulting of HAL_HIGH_LATENCY2_ENABLED to minimize_features.inc 2022-10-25 10:10:44 +11:00
Pierre Kancir 64774a2f92 GCS_MAVLink: fix always 0 division.
7/8 into array range bracket will be integral type, therefore 7/8 is reported as always 0.
2022-10-22 11:11:52 +11:00
Peter Barker 725b7b30ae GCS_MAVLink: remove more methods based on HAL_VISUSALODOM_ENABLED
Many of these mthods are calling another method which has no body when HAL_VISUALODOM is false
2022-10-21 15:03:35 +11:00
Peter Barker 342a5a71a9 GCS_MAVLink: move setting of MAV_SYS_STATUS_SENSOR_OPTICAL_FLOW sensors flags up 2022-10-19 21:00:48 +11:00
Andrew Tridgell 3ef1b1031a GCS_MAVLink: prevent segv in ftp
if the user disables ftp by changing BRD_OPTIONS after ftp has started
then we could dereference a nullptr
2022-10-19 19:09:24 +11:00
Andrew Tridgell 0858eb0dba GCS_MAVLink: send HYGROMETER_SENSOR message if data available 2022-10-19 13:17:30 +11:00
Peter Barker f75f68c2f1 GCS_MAVLink: add AP_MAVLINK_BATTERY2_ENABLED define
on by default but can be turned off in next stable
2022-10-18 11:12:49 +11:00
Peter Barker 6c3f9f9778 GCS_MAVLink: fix set-default-rate of a message we don't send by default
this fixes a problem where a GCS must know that a message isn't sent by default if they want to set it back to its default rate
2022-10-18 10:11:00 +11:00
Andrew Tridgell 9f5f7e018e GCS_MAVLINK: fixed warning in ftp build with gcc 11.3 2022-10-06 10:45:49 +11:00
Peter Barker 0f359c6a4e GCS_MAVLink: remove individual static members for fence, mission and rally 2022-10-04 11:17:35 +11:00
Peter Barker 9c7c29b2a7 GCS_MAVLink: add AP_GRIPPER_ENABLED 2022-10-04 10:58:34 +11:00
Peter Barker 2da23a218a GCS_MAVLink: correct compilation with rally disabled 2022-09-27 10:16:47 +10:00
Peter Barker 22d8d0a0fd AP_FileSystem: correct compilation when fence disabled 2022-09-27 10:16:47 +10:00
Peter Barker 63cb9eb07e GCS_MAVlink: correct compilation when fence disabled 2022-09-27 10:16:47 +10:00
Peter Barker 3b3497eba0 GCS_MAVLink: move definition of HAL_GCS_ENABLED to GCS_config.h 2022-09-27 09:26:45 +10:00
Yuri e165063324 GCS_MAVLink: increase short board names to 23 chars 2022-09-21 17:56:42 +10:00
m 652b361bc0 GCS_MAVLink: Send local ned home location to GCS 2022-09-21 15:58:25 +10:00
Peter Barker 589bae7d66 GCS_MAVLink: add and use AP_CAMERA_ENABLED 2022-09-21 11:58:38 +10:00
Peter Barker 81adafa97c GCS_MAVLink: add and use AP_RPM_ENABLED
... and backend-specific equivalents
2022-09-20 09:28:27 +10:00
Peter Barker 805b2921ed GCS_MAVLink: fold AP_Filesystem_Available.h into AP_Filesystem_config.h 2022-09-15 10:53:02 +10:00
Peter Barker c8a1fff8ae GCS_MAVLink: populate sysid/compid in reboot ACK 2022-09-14 20:16:38 +10:00
Peter Barker 65b5e0455b GCS_MAVLink: warn if GCS send MISSION_ITEM rather than MISSION_ITEM_INT 2022-09-13 11:50:54 +10:00
Peter Barker 406c94cdbf GCS_MAVLink: satisfy TODO; rename packet to mission_item_int 2022-09-13 11:50:54 +10:00
Peter Barker e065f6c629 GCS_MAVLink: remove incorrect and superfluous comment 2022-09-13 11:50:54 +10:00
Peter Barker 8cdb304871 GCS_MAVLink: warn if MISSION_REQUEST is used 2022-09-13 11:50:54 +10:00
olliw42 c034f8a099 GCS_MAVLink: add find_by_mavtype_and_compid 2022-09-12 08:44:38 +09:00
Michael du Breuil 5282dba42a GCS_MAVLink: Rate limit blocking accel calibrations
This allows us to drop any queued commands that may have arrived while
we were calibrating. Rather then entering a second and unexpected
calibration.
2022-09-09 08:52:14 +10:00
Michael du Breuil ff94ef1c60 GCS_MAVLink: Check for mission space before sending items 2022-09-07 17:52:23 +10:00
Andrew Tridgell b79f3caf86 GCS_MAVLINK: report on unsigned bootloader flash attempt 2022-09-05 12:35:37 +10:00
Andrew Tridgell 611f26f16c GCS_MAVLink: support SECURE_COMMAND 2022-09-05 12:35:37 +10:00
Andrew Tridgell a06d163ef0 GCS_MAVLink: refuse DFU for secure firmware 2022-08-30 10:51:06 +10:00
bugobliterator f31d915e14 GCS_MAVLink: add support for booting into dfu 2022-08-30 10:51:06 +10:00
Randy Mackay ff1624d4a0 GCS_MAVLink: MOUNT_CONFIGURE and MOUNT_CONTROL send deprecation warnings 2022-08-25 20:28:06 -04:00
Randy Mackay 3941598a10 GCS_MAVlink: integrate proximity-distance-array scope change 2022-08-24 18:26:27 +10:00
Peter Barker cd98fcec87 GCS_MAVLink: rename OpticalFlow class to AP_OpticalFlow
Brings us in-line with other classes in ArduPilot.

Removes ambiguity with AP_HAL::OpticalFlow which can cause compilation errors as we start to make code more portable across targets
2022-08-18 14:24:01 +10:00
Randy Mackay 1a54236862 GCS_MAVLink: forward mav-cmd-do-gimbal-manager-pitchyaw to AP_Mount 2022-08-15 20:29:25 -04:00
Randy Mackay c8996c04e1 GCS_MAVLink: replace send-mount-status with send-gimbal-device-attitude-status 2022-08-15 20:29:25 -04:00
Peter Barker 35c2653a87 GCS_MAVLink: stop using GCS_MAVLINK.h in header files
... by passing through a reference to a link object instead
2022-08-16 09:45:51 +10:00
Andrew Tridgell 2a95ced697 GCS_MAVLINK: pass OPEN_DRONE_ID_SYSTEM_UPDATE to library 2022-08-14 22:02:43 +10:00
Peter Barker 26d3ffc27d GCS_MAVLink: correct INS_generic example
segfaults due to lack of singletoin objects in examples
2022-08-13 20:53:29 +10:00
Roel Schiphorst 3bd792295c GCS_MAVLINK: add OpenDroneID messages 2022-08-09 14:37:08 +10:00
Iampete1 31bc6d9ec4 GCS_MAVLink: change AC_FENCE to AP_FENCE_ENABLED 2022-07-27 19:04:56 +10:00
Iampete1 5fa29eb01a GCS_MAVLink: fix complation without fence 2022-07-27 19:04:56 +10:00
Peter Barker cf915a0f35 GCS_MAVLink: ensure payload space for ACK before sending
Attempting to fix instance of the ACK not arriving on SITL reboot.  We already have a lot of code around trying to get this out, but there's been at least once instance it hasn't.
2022-07-26 21:23:23 +10:00
Peter Barker cbd591f2ba GCS_MAVLink: save some bytes by removing empty methods based on #ifs 2022-07-22 13:49:51 +10:00
Peter Barker 34f2599479 GCS_MAVLink: remove transitive include dependencies 2022-07-20 17:32:24 +10:00
Peter Barker ba2b7b8014 GCS_MAVLink: remove mavlink-specific methods from AP_SerialManager 2022-07-13 18:32:35 +10:00
Peter Barker d768bcc904 GCS_MAVLink: eliminate get_mavlink_channel
there's no dependence on any SerialManager stuff when determining this.  The protocol passed through was always mavlink...
2022-07-12 11:32:57 +10:00
Peter Barker 38119e17c7 GCS_MAVLink: correct gcs_out_of_space_to_send methodname
the "_count" is incorrect given the method which this calles on the link object
2022-07-12 11:10:53 +10:00
Iampete1 e8607c09f1 GCS_MAVLink: send ais message 2022-07-12 09:39:54 +10:00
Andrew Tridgell a92161cd18 GCS_MAVLink: improved start battery cell monitoring
this fixes two issues:

 1) we are not reporting the sag corrected voltage to GCS when we are
    sending individual cells

 2) we don't cope with having more than AP_BATT_MONITOR_CELLS_MAX
    cells (or 12 for low flash boards, 14 for 2M boards)

it fixes this by distributing the extra voltage over the calls.

This change is particularly important for high cell count DroneCAN
smart batteries, where we currently would not handle more than 14
cells and the GCS would display the wrong voltage

the PR also cleans up the use of volts vs mVolts for the local
variables
2022-07-11 14:21:41 +10:00
Peter Barker 5f095304cf GCS_MAVLink: add AP_LTM_TELEM_ENABLED 2022-06-28 20:19:41 +10:00
Randy Mackay 1fca72a831 GCS_MAVLink: add comment re sending locations to mounts 2022-06-15 09:07:14 +09:00
Randy Mackay f83b4cdb40 GCS_MAVLink: support sending AUTOPILOT_STATE_FOR_GIMBAL_DEVICE 2022-06-15 09:07:14 +09:00
bugobliterator 4dd66fed4b GCS_MAVLink: forward gimbal-device-information to AP_Mount
Co-authored-by: Randy Mackay <rmackay9@yahoo.com>

also forward gimbal_device_attitude_status
2022-06-15 09:07:14 +09:00
Randy Mackay 85b9e6e57c GCS_MAVLink: remove ToshibaCAN support 2022-06-10 12:08:05 +09:00
Randy Mackay 3ac5ad8e33 GCS_MAVLink: remove unused send_gimbal_report 2022-06-07 09:27:47 +10:00
Randy Mackay 8c19af72e0 GCS_MAVLink: learn routes even on private channels
Co-authored-by: Peter Barker <pbarker@barker.dropbear.id.au>
2022-06-06 15:50:13 +10:00
Peter Barker be21091619 GCS_MAVLink: pass mavlink_command_ack_t to accelcal library
The library needs to look at the content of the packet.  Given that GCS_MAVLink is already within handle_command_ack, decoding it there makes sense.
2022-05-25 17:55:55 +10:00
Ruffalo-sunghwan 51451d29e1 GCS_MAVLink : correct comment spelling 2022-05-24 20:27:45 +09:00
Iampete1 7d3368fa33 GCS_MAVLink: send servo raw 17-32 using port 1 2022-05-22 12:07:37 +10:00
murata 970af16251 GCS_MAVLink: Console output can be disabled 2022-05-17 09:53:06 +10:00
Andrew Tridgell ab4772c9b7 GCS_MAVLink: support symlinks as files
this allows for use of symlinks with ftp and scripts
2022-05-04 17:48:45 +10:00
Peter Barker 17ad710866 GCS_MAVLink: tidy includes 2022-05-03 09:14:58 +10:00
Andrew Tridgell 973befa5d8 GCS_MAVLink: prevent devop larger than buffer 2022-04-16 19:24:16 +10:00
Peter Barker f023f0443d GCS_MAVLink: move logging of RPM into RPM library 2022-04-13 16:22:19 +10:00
Andrew Tridgell 73eabb1fd0 GCS_MAVLink: send GCS voltage to GCS
may be resting voltage of option enabled
2022-03-22 11:12:54 +11:00
Peter Barker f1ec657c41 GCS_MAVLink: correct compilation with HAL_INS_ACCELCAL_ENABLED false 2022-03-22 10:39:44 +11:00
Peter Barker e0561b0ca1 GCS_MAVLink: split AP_HAL_SITL and HAL_SIM_ENABLED 2022-03-17 14:39:55 +11:00
Andrew Tridgell d28cecf25b GCS_MAVLink: support CANFD_FRAME messages 2022-03-11 18:13:54 +11:00
bugobliterator e996392671 GCS_MAVLink: disable CANTester by default 2022-03-11 18:13:54 +11:00
Stephen Dade 1344a0f41a GCS_MAVLink: Add support for High Latency MAVLink protocol 2022-03-03 14:56:15 +11:00
Peter Barker 7638cbf001 GCS_MAVLink: include cleanups 2022-03-01 11:21:33 +11:00
Peter Barker 2d96842490 GCS_MAVLink: correct out-of-space-to-send count 2022-02-23 18:43:34 +11:00
Peter Barker 87439eec80 GCS_MAVLink: stop taking semaphore aorund statustext queue loop
we're taking it in the loop
2022-02-22 12:56:38 +11:00
Andrew Tridgell 890ef5679c GCS_MAVLink: handle CAN_FILTER_MODIFY call 2022-02-19 18:24:56 +11:00
Andrew Tridgell cce89099c5 GCS_MAVLink: fixed mavlink packet corruption with multiple threads
this ensures we don't try to send more data to a uart than is
available in the tx buffer
2022-02-19 18:24:56 +11:00
Andrew Tridgell 44d9d410a1 GCS_MAVLink: fixed mavlink packet corruption with multiple threads
this ensures we don't try to send more data to a uart than is
available in the tx buffer
2022-02-19 17:20:17 +11:00
Andrew Tridgell ba502b462f GCS_MAVLINK: support CAN_FRAME and MAV_CMD_CAN_FORWARD 2022-02-12 16:36:05 +11:00
Peter Barker 29a469432e GCS_MAVLink: send deprecated message warning for MAVLINK_MSG_ID_SET_HOME_POSITION 2022-02-10 12:13:43 +11:00
Peter Barker f25755a05f GCS_MAVLink: mark MAV_CMD_DO_REPOSITION as having a location 2022-02-09 09:15:11 +11:00
Peter Barker 2e804bb0d5 GCS_MAVLink: mark MAV_CMD_DO_SET_ROI_LOCATION as having a location 2022-02-09 09:15:11 +11:00
Peter Barker dffec9325e GCS_MAVLink: create and use location_from_command_t 2022-02-09 09:15:11 +11:00
Andrew Tridgell a32ecfbf29 mavlink: added read size limits on FTP read
thanks to Michael Oborne for spotting this:

https://github.com/ArduPilot/MissionPlanner/issues/2784
2022-02-08 12:11:57 +11:00
Peter Barker a6713f8368 GCS_MAVLink: build ArduPilot against all.xml not ardupilotmega.xml 2022-02-08 11:00:41 +11:00
Peter Barker e9358ff491 GCS_MAVLink: provide default implemenation of handle_change_alt_request
The TODO items to actually implement these are almost 6 years old.
Since then these methods have been burning space.

This doesn't even make sense for several vehicles, so a default
implementation which does nothing seems OK.
2022-02-08 10:59:13 +11:00
Andrew Tridgell ab8c40d9bc GCS_MAVLink: report airspeed unhealthy when being rejected
this gives the pilot feedback on airspeed failing EKF innnovation
checks and switching to synthetic airspeed
2022-02-07 14:13:49 +11:00
Joshua Henderson f3cac9e1aa GCS_MAVLink: add send_attitude_target 2022-02-07 08:24:35 +09:00
Peter Barker 21caa8c686 GCS_MAVLink: rename AP_AHRS::get_position to get_location 2022-01-25 10:47:22 +11:00
Josh Henderson fa9a852ef7 GCS_MAVLINK: move AP_Airspeed to AP_Vehicle 2022-01-19 18:21:32 +11:00
Josh Henderson 1200f25e05 GCS_MAVLINK: move high_latency_air_temperature up 2022-01-19 18:21:32 +11:00
Jaaaky 20b3add9fb GCS_Common: Fix issue #19599 Failed to build Pixhawk1 with O3 2022-01-17 08:33:27 +11:00
Andrew Tridgell 06dcd5a16f GCS_MAVLink: don't use avoidance on plane 2022-01-11 09:51:47 +11:00
Peter Barker 948e00a072 GCS_MAVLink: make send_system_time const
needed when sending from const functions
2022-01-06 09:14:33 +11:00
Peter Barker d2693e4276 GCS_MAVLink: create and use AP_OPTICALFLOW_ENABLED
Including a define for each backend.
2021-12-29 18:12:03 +11:00
Andrew Tridgell f8e4d7facd GCS_MAVLink: support formatting of SD card 2021-12-28 16:04:57 +11:00
Peter Barker 6936a8eb6e GCS_MAVLink: adjust for rename of OpticalFlow.h to AP_OpticalFlow.h 2021-12-28 10:16:20 +11:00
Andrew Tridgell 20dd667fdc GCS_MAVLink: support ODOMETRY message for VIO
used by VOXL
2021-12-27 12:32:41 +11:00
Stephen Dade 038ae432ab GCS_MAVLink: Add UART option to not override streamrates 2021-12-15 14:14:07 +11:00
Stephen Dade c49fd7e908 GCS_MAVLink: Don't start with MAVLink1 messages on a MAVLink2 connection 2021-12-14 12:20:07 +09:00
Peter Barker f461605d88 GCS_MAVLink: make logging dependent on HAL_LOGGING_ENABLED not HAL_BUILD_AP_PERIPH 2021-12-14 10:34:06 +11:00
Randy Mackay d0747c5f20 GCS_MAVLink: battery status reports fault bitmask 2021-12-07 02:12:06 -08:00
Shiv Tyagi 339a07b8d3 AP_Devo_Telem: compile out devo telemetry
Devo telemetry is one of the most rarely used features (almost never used since added) we should compile it out from our code
2021-12-01 19:16:44 +11:00
Peter Barker ba63e9a17b GCS_MAVLink: correct send_scaled_imu gyro-count check 2021-11-29 15:08:23 +11:00
m c729fc7796 AP_Mission: Decode MAV_CMD_DO_PAUSE_CONTINUE commands 2021-11-25 08:18:27 +09:00
Peter Barker ca232bb510 GCS_MAVLink: signal quality reporting 2021-11-23 18:20:58 +11:00
Peter Barker 514368537b GCS_MAVLink: move from ENABLE_SCRIPTING to AP_SCRIPTING_ENABLED 2021-11-15 20:27:40 +11:00
Peter Barker fd128066ad GCS_MAVLink: ensure ENABLE_SCRIPTING is always defined 2021-11-15 20:27:40 +11:00
Andrew Tridgell 61cc86b911 GCS_MAVLINK: fixed build of boards with APJ_BOARD_ID>32768
this impacts modalai_fc_v1
2021-11-10 08:46:52 +11:00
Peter Barker f7d42a3f3b GCS_MAVLink: add board ID to AUTOPILOT_VERSION mavlink msg
Co-authored-by: durka
2021-11-05 14:10:46 +11:00
bugobliterator 85284d1bc0 GCS_MAVLink: remove use of AP_BattMonitor if AP_Periph and Battery disabled 2021-11-05 07:38:43 +11:00
Iampete1 a45e7608f2 GCS_MAVLink: set RC is_calibrating from command_preflight_calibration param4 2021-11-02 10:05:07 +11:00
Buzz 3ecfdd5f88 GCS_MAVLink: esp target is not STM32, so don't do stm32 specific magic
see libraries/AP_HAL_ESP32/README.md for more.

Author: Charles Villard <charlesvillard10@gmail.com>
Author: Buzz <davidbuzz@gmail.com>
2021-11-01 17:40:31 +11:00
nicholas-inocencio 9ca681c76d GCS_MAVLink: integrate new ADSB Ping200X/MissionPlanner new mavlink config and status commands 2021-10-26 16:53:00 -07:00
Andy Piper 008c61215c GCS_MAVLINK: convert APM_BUILD_COPTER_OR_HELI() to APM_BUILD_COPTER_OR_HELI 2021-10-26 11:42:12 +11:00
Sebastian Quilter 0276c165ed GCS_MAVLink: make rangefinder ranges m rather than cm 2021-10-21 21:28:53 +11:00
Peter Barker d7ef63deaf GCS_MAVLink: use USB VID and PID in AUTOPILOT_VERSION mavlink msg 2021-10-20 22:47:03 +11:00
Iampete1 05219ca5c4 GCS_Common: return true result for scripting set_message_interval 2021-10-20 18:35:09 +11:00
Tom Pittenger 12192f60e3 GCS_MAVLink: move ADSB mavlink handling from vehicles to common library 2021-10-14 19:55:27 -07:00
李孟晓 54b68ffae3 GCS_MAVLink: Provide the time remaining 2021-10-13 18:44:05 +11:00
Tom Pittenger e9ce1886c8 GCS_MAVLink: unify DO_SET_CAM_TRIG_DIST for missions and cmd_long 2021-10-12 15:04:00 -07:00
Josh Henderson 1e0ae4b998 GCS_MAVLINK: Common capacity_remaining_pct checks healthy status and has_current 2021-10-07 22:16:02 +11:00
Peter Barker e4ebea9e26 GCS_MAVLink: use AHRS position for location
This is our canonical source of position.
2021-10-05 10:20:44 +11:00
Peter Barker 07aa00f2b4 GCS_MAVLink: tidy sending of high-latency message 2021-10-05 10:20:44 +11:00
Shiv Tyagi 5cca39e50a GCS_Common : send water depth for each rangefinder instance
This sends depth message for each downward facing rangefinder instance which has data.

Co-Authored-By: Josh Henderson <69225461+hendjoshsr71@users.noreply.github.com>
2021-10-03 09:21:31 -04:00
Peter Barker 4aeb85d080 GCS_MAVLINK: correct mavlink return code when wiping storage header 2021-10-01 11:39:25 +10:00
Peter Barker 3f37a21aaf GCS_MAVLink: set message intervals from config files 2021-09-30 10:31:03 +10:00
Gone4Dirt a0245a2640 GCS_MAVLink: Add APM_BUILD_Heli 2021-09-29 19:55:48 +10:00
Dr.-Ing. Amilcar do Carmo Lucas 52c39bc382 GCS_MAVLink: add ESC_TELEMETRY_1_TO_4 to the mavlink_id_to_ap_message_id table 2021-09-28 10:01:16 +10:00
Shiv Tyagi 5f94986af1 GCS_Common : Mavlink wrap when battery percentage is above 100
When calculated battery percentage is above 100 we wrap it to INT8_MAX
2021-09-28 09:54:55 +10:00
Peter Barker 341379c5bd GCS_MAVLink: rename GENERATOR_ENABLED to HAL_GENERATOR_ENABLED 2021-09-26 19:24:09 +10:00
Tom Pittenger 6ac1b7daf2 GCS_MAVLink: fix periph-heavy compile errors with different things enabled 2021-09-24 10:47:13 -05:00
Peter Barker 9f6b9c7519 GCS_MAVLink: move from HAL_NO_GCS to HAL_GCS_ENABLED 2021-09-22 21:37:00 +10:00
Andrew Tridgell 5dcfa95444 GCS_Mavlink: allow setting of AHRS_TRIM_Z 2021-09-17 14:07:14 +10:00
Willian Galvani 018ff3d11c GCS_MAVLink: update to use capacity_remaining_pct() as a bool 2021-09-08 17:17:41 +10:00
Peter Barker fd144ccc59 GCS_MAVLink: log source sysid/compid in MAVC
For field length purposed had tor remove Current and autocontinue which we don't care about
anyway.
2021-09-07 11:06:08 +10:00
Peter Barker a292fe13d6 GCS_MAVLink: add option to create internal error via preflight-reboot
useful for testing our handling of internal errors
2021-09-01 18:58:15 +10:00
Andrew Tridgell ae615de4ce GCS_MAVLink: added logging of NAMED_VALUE_FLOAT
this is useful when running sensors on a companion computer and
wanting values logged in main ArduPilot log.
2021-09-01 17:52:48 +10:00
Andrew Tridgell dc252aa8f5 GCS_MAVLink: check for null comm_port before writing
this was found when adding debug code to write to a specific channel
2021-08-31 07:55:27 +10:00
olliw42 617024bdfa GCS_Mavlink: scale across full valid range 2021-08-26 09:44:59 +10:00
olliw42 bacfe82c66 GCS_MAVLINK: add receiver_rssi() method, and use it 2021-08-26 09:44:59 +10:00
Andrew Tridgell 5c3056e50d GCS_MAVLink: added MCU_STATUS message 2021-08-25 07:11:31 +10:00
Tom Pittenger 896dd49c96 GCS_MAVLink: add MAV_CMD_ADSB_IDENT cmd 2021-08-19 17:49:27 +10:00
bugobliterator e9faab288c GCS_MAVLink: allow mavftp on AP_Periph 2021-08-19 14:20:58 +10:00
Randy Mackay 2fba31332b GCS_MAVLink: support MAV_CMD_SET_EKF_SOURCE_SET command
this allows external systems to set the active EKF source set
2021-08-19 12:11:08 +10:00
Andrew Tridgell d92c5589a9 GCS_MAVLink: added fields for new mavlink2 extensions 2021-08-19 12:08:54 +10:00
Peter Barker a91d30369e GCS_MAVLink: stop sending SENSOR_OFFSETS
Only works for first compass instance.

We have all of these in parameters anyway.
2021-08-18 18:06:24 +10:00
Peter Barker 784c56f6d0 GCS_MVALink: remove virtual from send_simstate
No longer overridden by anyone
2021-08-10 09:48:34 +10:00
Peter Hall 60db4c1a62 GCS_Mavlink: add AIS msg 2021-08-10 08:11:18 +09:00
Andrew Tridgell 02ca6b67a2 GCS_MAVLINK: fixed macos snprintf error 2021-08-05 09:43:35 +10:00
bugobliterator 0d34a78701 GCS_MAVLink: change class name from SITL::SITL to SITL::SIM 2021-08-05 07:25:31 +10:00
Peter Barker 76c4af6aef GCS_MAVLink: cope with MAV_CMD_ACCELCAL_VEHICLE_POS outside accelcal 2021-08-03 10:54:52 +10:00
Peter Barker 431c186306 GCS_MAVLink: use AP::compass().available in place of enabled() 2021-07-30 12:19:42 +10:00
Peter Barker ad89e9777c GCS_MAVLink: send primary quat in ATTITUDE_QUATERNION 2021-07-28 17:20:28 +10:00
bugobliterator 3d03979b16 GCS_MAVLink: add support for mavlink out on AP_Periph 2021-07-26 13:45:43 +10:00
Peter Barker e1b839f739 GCS_MAVLink: rename for AHRS restructuring 2021-07-21 21:01:39 +10:00
Peter Barker ec17abce2e GCS_MAVLink: remove ability to use DCM as AHRS 2021-07-21 21:01:39 +10:00
bugobliterator f3bc75c538 GCS_MAVLink: add support for passthrough with baud changes 2021-07-21 17:06:41 +10:00
Stephen Dade 035f65fe03 GCS_MAVLink: Add support for HIGH_LATENCY2 messages 2021-07-07 17:10:05 +10:00
Siddharth Purohit 9a19a86a81 GCS_MAVLink: omit code that breaks build for herepro 2021-07-02 08:50:16 +10:00
Randy Mackay 3900a4f14a GCS_MAVLink: send water depth and temp 2021-06-30 12:05:09 +09:00
Siddharth Purohit 02c74a8fa1 GCS_MAVLink: Use HAL_CANMANAGER_ENABLED instead of HAL_ENABLE_LIBUAVCAN_DRIVERS 2021-06-24 09:02:42 +10:00
Peter Barker 84603e2c85 GCS_MAVLink: add support for MAV_CMD_RUN_PREARM_CHECKS 2021-06-21 09:41:17 +10:00
Peter Barker a23999d0f0 GCS_MAVLink: remove HIL support 2021-06-15 09:47:31 +10:00
Peter Barker c43965f32e GCS_MAVLink: correct decimation of SENSOR_STATUS message
static infers shared between all backends
2021-06-15 07:07:39 +10:00
Andrew Tridgell 6c24a030a6 GCS_MAVLink: use HAL_EFI_ENABLED 2021-06-09 18:07:00 +10:00
Josh Henderson 518666b5f0 GCS_MAVLink: Add battery_charge_state to Battery_Status message 2021-06-08 09:27:13 +10:00
Andrew Tridgell 96577b47f0 GCS_MAVLink: removed perf counters 2021-06-07 14:29:27 +10:00
Peter Barker aaae7bda6b GCS_MAVLink: provide compatability with bad integer-stored radii 2021-06-06 11:41:30 +10:00
Peter Barker 09f4961a63 GCS_MAVLink: increase statustext queue size to 7 on low-mem boards
... and SITL....

Copter currently spits out so many messages on a banner-send (e.g what
we do when parameters are fetched) that it puses the first sent message
straight out of the queue before it gets a chance to be sent from the
queue.
2021-05-27 12:39:04 +10:00
giacomo892 f486d7170c GCS_MAVLink: Fix build for builds with GPS_MAX_RECEIVERS = 1 2021-05-18 10:26:55 +10:00
Andrew Tridgell 45daff9f47 GCS_MAVLINK: mag health reported in SYS_STATUS should not depend on AHRS use
When using external yaw, EKF3 always reports use_compass as false,
which causes the GCS to get a bad compass health message.

thanks to Argosdyne for reporting
2021-05-14 08:05:08 +09:00
Andy Piper fca6925129 GCS_MAVLink: use generic send_esc_telemetry_mavlink() from AP_ESC_Telem 2021-05-12 17:01:11 +10:00
Peter Barker bd76d15df4 GCS_MAVLink: log auxillary function invocations 2021-04-29 13:00:40 +10:00
Andrew Tridgell c53c112691 GCS_MAVLink: expose functions to convert fence and rally to mavlink
this allows for the @MISSION filesystem to download data in the
current mavlink format
2021-04-21 07:12:55 +10:00
Andrew Tridgell 8444a3310d GCS_MAVLink: added handle_command_landing_target()
used to allow vehicle handling of time corrected LANDING_TARGET msgs
2021-04-13 17:30:19 +10:00
Peter Barker 9471d8069c GCS_MAVLink: move handling of last-seen-SYSID_MYGCS up to GCS base class 2021-04-07 17:54:21 +10:00
Peter Barker 1a2b960b0d GCS_MAVLink: prune old statustexts from queue 2021-04-06 09:10:43 +10:00
Peter Barker 4027ed6070 GCS_MAVLink: make servicing statustext more efficient
We should only need to do a single PAYLOAD_SIZE check for each mavlink
backend now.

 - stop iterating over all channels, only do instantiated mavlink
backends
 - if we don't have space for a statustext on a channel, break
immediately and don't do remaining texts
 - resposibility is now on the GCS_MAVLINK backend for sending texts
   - that's a timing change

 - only iterate over entries actually in the queue rather than maximum
queue size
   - it's likely to be the full length anyway as we don't expire things
from the queue and most setups will have full channels
2021-04-06 09:10:43 +10:00
Iampete1 0fe38da522 GCS_MAVLink: rename battery reset function 2021-03-31 19:21:59 +11:00
Peter Barker 115e895c82 GCS_MAVLink: return MAV_RESULT_FAILED from do_aux_function if invalid function 2021-03-31 11:36:09 +11:00
Peter Barker 2d61ded1f3 GCS_MAVLink: add option to execute auxillary functions via mavlink 2021-03-31 11:36:09 +11:00
Randy Mackay b8f9c3b9c0 GCS_MAVLink: use of AP_Proximity checks HAL_PROXIMITY_ENABLED 2021-03-26 16:22:46 +09:00
Peter Barker 5123b05b2b GCS_MAVLink: add support for ATTITUDE_QUATERNION 2021-03-13 09:44:12 +11:00
James O'Shannessy f028747399 GCS_MAVLink: Remove todo since plane now supports MAV Protocol Capability Mission Fence 2021-03-05 16:48:57 +11:00
James O'Shannessy c2abf27d78 GCS_MAVLink: Add reporting of fence floor breaches to GCS_MAVLink
GCS_MAVLink: Add disabling of fence floor only, per mavlink spec

GCS_MAVLink: Cannot enable a fence if the fence is not present
2021-03-05 14:52:46 +11:00
Peter Barker e3de88d1d4 GCS_MAVLink: handle MAV_CMD_DO_SET_MISSION_CURRENT 2021-03-04 11:59:33 +11:00
Peter Barker 7480a2a00b GCS_MAVLink: correct output of AHRS2 mavlink message
The || here was causing short-circuiting
2021-03-02 20:48:36 +11:00
Peter Barker 9932aa99f7 GCS_MAVlink: return identical seq in MISSION_CURRENT if possible after set
// because MISSION_SET_CURRENT is a message not a command,
        // there is not ACK associated with us successfully changing
        // our waypoint.  Some GCSs use the fact we return exactly the
        // same mission sequence number in this packet as an ACK - so
        // if they send a MISSION_SET_CURRENT with seq number of 4
        // then they expect to receive a MISSION_CURRENT message with
        // exactly that sequence number in it, even if ArduPilot never
        // actually holds that as a sequence number (e.g. packet.seq==0).
2021-02-24 19:00:34 +11:00
Peter Barker cfe9dc32d1 GCS_MAVLink: only send distance_sensor messages if valid data seen
In the case you only have a forward-pointing LIDAR we'd send messages
for each of the other orientations from proximty's horizontal-distances
array, chewing up bandwidth and processing time.
2021-02-23 10:02:47 +09:00
Peter Barker c5e62eb6e4 GCS_MAVLink: schedule current waypoint rather than immediate send
This message may not fit in our outgoing buffer
2021-02-23 11:27:22 +11:00
Patrick José Pereira ba2adac869 GCS_MAVLink: Simplify boolean expression
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2021-02-23 10:30:05 +11:00
Peter Barker 1afa0a7ff2 GCS_MAVLink: remove unused member
and a bogus comment
2021-02-20 21:48:25 +11:00
Peter Barker eefcc92f24 GCS_MAVLink: take MAV_CMD_DO_SPRAYER as a mavlink command 2021-02-16 22:36:43 +11:00
Peter Hall c1a831bbf4 GCS_MAVLink: sensor flags, only mark AHRS as enabled once initialised 2021-02-16 12:54:28 +11:00
Andrew Tridgell 6d1511f3eb GCS_MAVLink: added method to force save calibration
useful after reloading parameters
2021-02-15 07:24:40 +11:00
Mark Whitehorn bb15c18cc3 GCS_MAVLink: send message when MAVFTP init fails 2021-02-10 23:06:36 +11:00
murata 698f967b63 GCS_MAVLink: Notify the maximum number of missions
Update libraries/GCS_MAVLink/MissionItemProtocol.cpp

Co-authored-by: WickedShell <Wicked.Shell.Scripts@gmail.com>

GCS_MAVLink: Notify the maximum number of missions
2021-02-03 20:31:50 +11:00
Patrick José Pereira e8e41c512e GCS_MAVLINK: Add missing const in member functions
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2021-02-03 18:45:14 +11:00
Rishabh a5fafe57d8 GCS_MAVLink: Add support for OBSTACLE_DISTANCE_3D 2021-02-01 14:34:13 +09:00
Andrew Tridgell 1716fcf995 GCS_MAVLink: fixed valgrind errors with AP_Param::ParamToken 2021-01-26 10:43:09 +11:00
Peter Barker e32ca819fc GCS_MAVLink: mark results as unused 2021-01-21 20:41:17 +11:00
Peter Barker e58d2ecf2f GCS_MAVLink: add mavlink command option to create a 250ms long loop 2021-01-21 11:35:57 +11:00
yaapu 1c3b7d5ecd GCS_MAVLink: added support for passthrough telemetry over crossfire 2021-01-20 18:06:24 +11:00
Pierre Kancir 30a4747898 GCS_MAVLink: send sim_state msg 2021-01-19 10:40:43 +11:00
Andrew Tridgell ed8d86e5e6 GCS_MAVLINK: support deliberate parameter corruption 2021-01-16 06:47:10 +11:00
Peter Barker 3d577d94e8 GCS_MAVLink: add do_disarm_checks boolean to disarm call
this creates symmetry between arming and disarming, at least as far as
the top-level arm() and disarm() calls are concerned.
2021-01-12 08:48:44 +09:00
Peter Barker 0052500d67 GCS_MAVLink: split out a handle_command_component_arm_disarm 2021-01-12 08:48:44 +09:00
Brad Bosch a2192eda5e GCS_MAVLink: use RADIO_STATUS message txbuf field
this avoids overrunning radio buffer in queued_param_send()
2021-01-12 10:46:15 +11:00
Andrew Tridgell 882d9c4e23 GCS_MAVLink: adjust stack sizes 2021-01-10 08:28:55 +11:00
Peter Barker d24e569b20 GCS_MAVLink: add option to panic the autopilot 2021-01-05 10:04:25 +11:00
Peter Barker b8827e6486 GCS_MAVLink: allow control to be return to radio for higher-numbered RC_CHANNELS_OVERRIDE 2020-12-29 15:03:34 +11:00
Peter Barker 6f4bbd3f57 GCS_MAVLink: for high RC_CHANNELS_OVERRIDE channels zero means ignore the field 2020-12-29 15:03:34 +11:00
Andrew Tridgell e6c5382a28 GCS_MAVLINK: fixed FPE in DO_SET_ROI
this prevents a floating point exception when MissionPlanner sends an
invalid DO_SET_ROI

See https://github.com/ArduPilot/MissionPlanner/issues/2528
2020-12-28 11:53:03 +11:00
Dr.-Ing. Amilcar do Carmo Lucas d76825feeb GCS_MAVLink: adapt to upstream changes in the distance_sensor mavlink message 2020-12-19 19:54:03 +11:00
Andrew Tridgell 6df118e7b4 GCS_MAVLink: convert to using hal.serial() instead of hal.uartX 2020-12-15 10:32:46 +11:00
Dr.-Ing. Amilcar do Carmo Lucas 1d0e7d2974 GCS_MAVLink: Added cells 11...14 voltage information (13 and 14 are 0 for now) 2020-12-11 06:37:32 +11:00
Andrew Tridgell 5e3bf0a703 GCS_MAVLink: implement BRD_OPTIONS bit for setting of internal parameters 2020-12-08 13:22:17 +11:00
Andrew Tridgell 8b5ff1a6de GCS_MAVLink: enable GCS_SEND_TEXT() to send as CAN LogMessage messages 2020-12-04 15:16:21 +11:00
Peter Barker 88895f9b13 GCS_MAVLink: stop using one backend's signing structure for all backends 2020-11-30 14:11:08 +11:00
Gone4Dirt caf1ad28d5 GCS_Common: AP_Generator_Richenpower is now AP_Generator 2020-11-24 12:54:52 +11:00
Peter Barker f0c22244a5 GCS_MAVLink: correct response codes when mode change fails
Was "UNSUPPORTED", which is supposed to mean, "Command is not supported"

Now is either "DENIED" (Command is invalid (is supported but has invalid
parameters)) or "FAILED" (Command is valid, but execution has failed.)

We should probably returned DENIED if we try to change to a mode which
doesn't exist, but that would require another callback on AP_Vehicle.
It would also lead to questions around what a valid mode is - so
QSTABILIZE if quadplane is disabled in Plane, for example.
2020-11-24 10:09:37 +11:00
Hwurzburg 6eca18c08b GCS_MAVLink: add Board option to disable MAVftp in low mem bds/apps 2020-11-17 10:41:59 +11:00
Andrew Tridgell 9c74474196 GCS_MAVLink: setup baudrates for passthru serial ports 2020-11-17 10:26:14 +11:00
Peter Barker 41943f5fda GCS_MAVLink: correct use of uninitialised value in Rally upload 2020-11-11 18:22:58 +11:00
Andy Piper 4d1c660ebc GCS_MAVLink: enable OSD parameters on parameter enablement 2020-11-11 18:13:11 +11:00
Andrew Tridgell 147df12eb8 GCS_MAVLink: allow replay to use GCS_Dummy 2020-11-10 16:15:45 +11:00
Tatsuya Yamaguchi e1126d4fd6 GCS_MAVLink: use micro64 instead of micros for time_usec 2020-10-27 15:37:29 +11:00
Iampete1 73594cb19b GCS_MAVLink: send airspeed temp in scaled_pressure 2020-10-27 11:24:49 +11:00
Peter Barker 74f75dcd31 GCS_MAVLink: fill AUTOPILOT_VERSION.uid2 from get_system_id_unformatted 2020-10-21 18:26:12 +11:00
Peter Barker 7c8df47ac9 GCS_MAVLink: process messages sent to broadcast system
.... even if we've forwarded them to someone else.
2020-10-21 18:22:48 +11:00
Peter Barker d3ba7a8409 GCS_MAVLink: don't learn a route to the broadcast component
Using a component ID of 0 for your source is invalid according to
common.xml

However, some clients do use it.

This stops us learning a route to that client for the broadcast client
for our own system ID.
2020-10-21 18:22:48 +11:00
murata 6304ade668 GCS_MAVLink: Change to leave the lower 16 bits. 2020-10-13 12:06:18 +11:00
Andrew Tridgell e346cd3c80 GCS_MAVLink: fixed use of incorrect millis16() values 2020-10-12 13:48:15 +11:00
Peter Barker 45f7322af6 GCS_MAVLink: avoid catching up on sending messages when sending disrupted
The code here was never meant to maintain an "average" streamrate.  It
was designed so that we would maintain a consistent clock in the face of
minor scheduling anomalies (like an EKF fusion step).

The way this is written, however, makes us spit out a message for each
of the intervals we missed - clearly not intended behaviour.

This was tested by inserting the following code:

 void GCS_MAVLINK::update_send()
 {
+    const uint32_t xnow = AP_HAL::millis();
+    if (xnow > 10000 &&
+        xnow < 20000) {
+        return;
+    }
+
2020-10-12 13:48:15 +11:00
Patrick José Pereira 8701e3626d GCS_MAVLink: Update GCS_Dummy to use new AP_FWVersionDefine header
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2020-10-07 19:32:12 +11:00
Peter Barker 7cb8cde417 GCS_MAVLink: move orderly rebooting code from GCS into AP_Vehicle
Several places we reboot the vehicle we should probably do several of
the things done in this code - flushing parameters, forcing safety on
etc.
2020-09-29 18:07:59 +10:00
yaapu e7a49dd624 GCS_Mavlink: refactor zero_rc_outputs() out of GCS_Mavlink 2020-09-29 18:07:59 +10:00
Peter Barker 0c88af99da GCS_MAVLink: revert removal of private channel check when forwarding
This reverts 6dc77c97ce

The commit caused a regression on Solo as the gimbal is "nodding",
indicating traffic from the autopilot is getting through to the gimbal.
2020-09-25 09:42:27 +10:00
Andy Piper 5d487be242 GCS_MAVLink: squash enum type error 2020-09-22 09:37:02 +10:00
Andy Piper 8b766efb0a GCS_MAVLink: add support for updating OSD parameters over mavlink 2020-09-09 20:36:42 +10:00
Andrew Tridgell 74686f8dc4 GCS_MAVLink: fixed locking of mavlink in serial control
this fixes takeover of mavlink ports for high serial numbers
2020-09-08 09:01:16 +10:00
Sharvashish Das 80e2dbc9f2 GCS_Common: send_local_position uses offset from origin 2020-09-01 10:27:18 +10:00
Andrew Tridgell 30f9fd9d2a GCS_MAVLink: fixed overrun of text passed to other libraries
this caused corruption in log files, and was passing a
non-nul-terminated string to notify and other libraries
2020-08-28 17:35:17 +10:00
Siddharth Purohit 42f5f986d8 GCS_MAVLink: use AP_CANManager library
also add support for handling enumeration cmd by KDETest
2020-08-19 17:31:09 +10:00
Peter Barker 0e284b95b0 GCS_MAVLink: move battery type enumeration out of parameters object 2020-08-11 13:21:52 +10:00
Michael du Breuil 6dc77c97ce GCS_MAVLink: Remove redundant check for private channels
We can't learn the route for sending to a private channel, so we
shouldn't need to actually check it when iterating the routes.
2020-08-11 09:49:42 +10:00
Randy Mackay 1a3ef62b84 GCS_MAVLink: add virtual send_winch_status 2020-08-07 21:55:07 +09:00
Siddharth Purohit 1a08252504 GCS_MAVLink: add support for bank selection on SPI DEVICE_OPs 2020-08-06 12:41:35 +10:00
elhayra 9b3a574775 GCS_MAVLink: sending UAVCAN MAVlink ESC messages 2020-08-06 09:28:35 +10:00
Andy Piper e91ae19544 GCS_MAVLink: make mount/gimbal configurable on a per-board basis 2020-08-04 09:18:14 +10:00
Dr.-Ing. Amilcar do Carmo Lucas 7067cbdafd GCS_Mavlink: Adapt to upstream mavlink changes to the SCALED_PRESSURE message 2020-07-29 14:34:22 +10:00
Michael du Breuil 6773821b3b GCS_MAVLink: Don't forward MAVLink data on channels marked private, make private channels more private 2020-07-22 07:17:49 +10:00
Andy Piper 05416daef3 GCS_Mavlink: output fast sampling startup messages 2020-07-10 16:45:29 +10:00
Andrew Tridgell 5a18b16f69 GCS_MAVLink: use strncpy_noterm 2020-07-10 13:32:24 +10:00
Andrew Tridgell 9466e7e71e GCS_MAVLink: make correct_offboard_timestamp_usec_to_ms protected
for use by vehicle code
2020-07-10 13:28:38 +10:00
Andrew Tridgell 91aaa7876d GCS_MAVLink: reserve another mavlink channel
for SimShip
2020-07-10 13:28:38 +10:00
Peter Barker 741520d598 GCS_MAVLink: find next bucket to send when sending-ids emptied on msg removal
We need to find the next bucket of messages to send when we've removed
the last message id from the current set of IDs we're sending out - not
just when we've empted the bucket the messages came from in the first
place.

An internal check caught this bug - the
'next_deferred_bucket_message_to_send called on empty bucket' error
2020-07-07 10:49:31 +10:00
Andrew Tridgell 90232fa6c0 GCS_MAVLink: fixed alignment errors in FTP server 2020-07-07 10:23:00 +10:00
Peter Barker e2056f56e3 GCS_MAVLink: support for sending generator message 2020-07-03 08:21:42 +09:00
Randy Mackay 03ea646e50 GCS_MAVLink: send_battery_status uses memcpy for cell voltages
Co-authored-by: WickedShell <Wicked.Shell.Scripts@gmail.com>
2020-06-24 10:19:15 +09:00
Randy Mackay 65aea0e9c1 GCS_MAVLink: send_battery_status sends min of cell 10 11 and 12 2020-06-24 10:19:15 +09:00
Michael du Breuil 7fae084793 GCS_MAVLink: Only send a single battery status per call 2020-06-23 09:18:56 +10:00
Peter Barker e4621e6921 GCS_MAVLink: do not process commands after we have decided to reboot 2020-06-17 11:54:03 +10:00
chobits 991387dbfb GCS_MAVLink: support covariance field in vis pose msg 2020-06-09 13:31:21 +09:00
Peter Barker f158533fe9 GCS_MAVLink: allow private channels to also be active
This will allow for logging of private channels.
2020-06-09 10:37:32 +10:00
Peter Barker 06012cbc56 GCS_MAVLink: cope with RingBuffer rename if empty() to is_empty() 2020-06-09 10:21:48 +10:00
Peter Barker b428f12913 GCS_MAVLink: add and use accessor for last-RADIO_STATUS.remrssi-ms 2020-06-09 10:20:29 +10:00
Peter Barker 07e3f1d48f GCS_MAVLink: add RADIO_STATUS.rssi as an AP_RSSI telemetry source 2020-06-09 10:20:29 +10:00
Peter Barker c1de346150 GCS_MAVLink: avoid copying data twice in ftp transfers 2020-06-07 08:51:09 +10:00
chobits ff6e4c4f9a GCS_MAVLink: support VISION_SPEED_ESTIMATE 2020-06-01 17:51:24 +09:00
Andrew Tridgell fc28cd4fa2 GCS_MAVLink: fixed a ftp duplicate reply
this fixes a bug in burst replies where the duplicate reply may have
the wrong offset. This causes the "paramftp bad type" error
2020-05-14 09:53:42 +10:00
Peter Barker 5100c9fb8c GCS_Common: whitelist AUTOPILOT_VERSION for in_delay_callback sending
GCSs may request this very early on in the boot process, particularly
for SITL.

If we try to send it during a delay callback then we end up dropping it
at the moment - but we'd already sent the ack in response to the
request.
2020-05-11 15:22:38 +10:00
Andrew Tridgell 87c2858bde GCS_MAVLink: give banner on param download with ftp
thanks to Peter for noticing
2020-05-10 15:10:21 +10:00
Andy Piper da166b256d GCS_MAVLink: add messages to Spektrum telemetry if it is enabled 2020-05-05 09:23:15 +10:00
Peter Barker 81454c7a40 GCS_MAVLink: create and use INTERNAL_ERROR macro so we get line numbers 2020-04-30 13:21:36 +10:00
Andrew Tridgell 7571e616de GCS_MAVLink: handle session timeout due to lost packets
and fixed handling of losing last pkt in a burst
2020-04-29 07:36:55 +10:00
Andrew Tridgell 65e790a48c GCS_MAVLink: invalidate param count on set of ENABLE param 2020-04-29 07:36:55 +10:00
Andrew Tridgell 7cd901fa5b GCS_MAVLink: enable ftp without filesystem
allows for @PARAM and @SYS
2020-04-29 07:36:55 +10:00
Andrew Tridgell 6811d79b6f GCS_MAVLink: define GCS_SEND_TEXT() globally
used to avoid linking GCS in AP_Periph
2020-04-29 07:36:55 +10:00
Peter Barker 26b88823f4 GCS_MAVLink: correct out-of-space-to-send call in HAVE_PAYLOAD_SPACE 2020-04-27 15:30:30 +10:00
Peter Barker 8b0b644c11 GCS_MAVLink: correct check for payload space for COMMAND_ACK 2020-04-27 15:30:30 +10:00
Peter Barker 668e0d0e65 GCS_MAVLink: check for empty replies queue first thing in send_ftp_replies
Will save us a little time on average
2020-04-27 15:30:30 +10:00
Randy Mackay 6f8176c71e GCS_MAVLink: remove ahrs3 2020-04-22 14:11:17 +09:00
Peter Barker 8b9281eaa1 GCS_MAVLink: log number of times message not sent due to no space 2020-04-17 22:21:14 +10:00
Peter Barker 41ada7f8f4 GCS_MAVLink: document the payload-space macros 2020-04-17 10:20:49 +10:00
Randy Mackay c39fef6c56 GCS_MAVLink: pass vision-position-estimate reset_counter to AP_VisualOdom handler 2020-04-14 10:28:03 +10:00
Randy Mackay 9769f08fd9 GCS_MAVLink: visual odometry build fixes 2020-04-09 19:41:08 +09:00
Randy Mackay a9c1eb5af4 GCS_MAVLink: fill in sys_status vision position bits 2020-04-09 19:41:08 +09:00
Randy Mackay a1ddd55ea5 GCS_MAVlink: AP_integrate of rename to handle_vision_position_delta_msg 2020-04-09 19:41:08 +09:00
Randy Mackay 728e8b45a9 GCS_MAVLink: use AP_VisualOdom to handle vision-position-estimate messages 2020-04-09 19:41:08 +09:00
Siddharth Purohit b0cbbb4bea GCS_Common: fix unannotated fall-through between switch labels 2020-04-01 17:10:36 +11:00
Andrew Tridgell 21e93dae34 GCS_MAVLink: send only old value for readonly param set
this prevents a condition where the GCS can display the wrong value if
the 2nd PARAM_VALUE is lost

Note that groundstations can tell the set failed due to readonly in
the following ways:

 1) look for the statustext: Param write denied (PARAMNAME)

 2) see that the value came back with the old value, with index of
   65535

 3) can repeat the send, looking for (1) and (2)

Michael has proposed we add a PARAM_VALUE mavlink2 flags
extension. That would be nice, but we should still make this change to
fix the issue with mavlink 1.0
2020-03-31 11:19:58 +11:00
Peter Barker 55d37e5d0e GCS_MAVLink: correct slowing down of waypoint re-requests
These re-requests shouldn't be slowed down by a factor of 20.

This was a left-over from when we did these in terms of 20ms intervals
(50Hz loop rate)
2020-03-31 11:15:04 +11:00
Peter Barker ca7fcc093c GCS_MAVLink: correct return type on get_stream_slowdown_ms
Only used in one place.  On slow links may have caused us to re-request
a waypoint too often.  "Too often" is still >1s intervals.
2020-03-31 11:15:04 +11:00
Peter Barker 0b756547be GCS_MAVLink: add stream_slowdown to MAV message 2020-03-31 11:13:11 +11:00
Peter Barker 7028f1adba GCS_MAVLink: GCS_FTP: remove redundant more_pending variable
This is taken care of by the "break" statements
2020-03-31 10:38:13 +11:00
Peter Barker a09ac895e9 GCS_MAVLink: remove dead assignment
This value is never used
2020-03-31 10:38:13 +11:00
Michael du Breuil 18baf18041 GCS_MAVLink: Remove redundant assignment to the command
This is done internally by the conversion to mission_item_int_t
2020-03-31 10:35:49 +11:00
Randy Mackay ecf5abc1f2 GCS_MAVLink: minor format fix 2020-03-30 20:20:08 +09:00
Andrew Tridgell e7fdf8fad1 GCS_MAVLink: reduced delay between ftp packets 2020-03-28 15:28:03 +11:00
Andrew Tridgell 5c9ae33151 GCS_MAVLink: support variable sized packets in burst read
this allows packet size to be tailored to the transport
2020-03-28 15:28:03 +11:00
Andrew Tridgell 8a84dbc19e GCS_MAVLink: slow down telemetry during ftp 2020-03-28 15:28:03 +11:00
Andrew Tridgell c1d4a5bd35 GCS_MAVLINK: prevent closedir() with nullptr 2020-03-28 15:28:03 +11:00
Andrew Tridgell 28082774b6 GCS_MAVLink: use new DirHandle for directory listings 2020-03-28 15:28:03 +11:00
Peter Barker 97b07d9c84 GCS_MAVLink: add option to get the autopilot to hard-fault itself 2020-03-19 16:03:58 +11:00
Andrew Tridgell 39fc324854 GCS_MAVLink: convert to new get_rpm() API 2020-03-12 08:36:40 +11:00
Andrew Tridgell aaf828c9d4 GCS_MAVLink: consider NO_CHANGE as success for bootloader flash
this prevents GCS users from seeing "update failed"
2020-03-11 16:30:06 +11:00
Peter Barker ebfa910774 GCS_MAVLink: GCS_Dummy: add missing CR to console output of statustexts
send_text and friends don't expect the caller to add the CR; the GCS
will add one.  Since we're jsut emitting to console, add one ourselves.
2020-03-10 19:07:08 +11:00
Rishabh f3e66055e5 GCS_MAVLink: Alert GCS if user tries calibration while vehicle is armed 2020-03-03 11:37:19 +11:00
Peter Barker fbe2e75b9f GCS_MAVLink: divide time allowed to send messages fairly 2020-02-27 08:49:59 +11:00
Peter Barker 727c12c388 GCS_MAVLink: move initialisation of serial and gcs to AP_Vehicle 2020-02-25 11:50:55 +11:00
Peter Barker e2c9f6a8a1 GCS_MAVLink: add flags to MAV dataflash log
holds various pieces of simple information about a link
2020-02-25 10:59:22 +11:00
Peter Barker f8f4ed7ee0 GCS_MAVLink: log disarm method 2020-02-22 12:16:29 +11:00
Andrew Tridgell 20ea1a3dc7 GCS_MAVLink: don't send statustext from other than main thread
This fixes high stack usage in the RCIN thread when it notifies the
GCS of a new RCIN protocol. The problem is severe when signing is
enabled, as signing adds over 500 bytes to stack cost of sending a
mavlink msg

fixes issue #13615
2020-02-20 10:39:29 +11:00
Michael du Breuil 1f8c030eba GCS_MAVLink: Allow scripting to start/stop the REPL 2020-02-18 17:23:22 -07:00
Michael du Breuil 296c014d14 GCS_MAVLink: Fix excess trimming of autopilot version 2020-02-19 09:10:02 +11:00
Andrew Tridgell 32ecd904bd GCS_MAVLink: use MAV_SYS_STATUS_PREARM_CHECK
this allows GCS to continually display prearm check status
2020-02-18 15:16:02 +11:00
Matt Lawrence c84dcd9bf8 GCS_Mavlink: Add routing for GoPro heartbeat 2020-02-18 11:13:27 +11:00
Peter Barker 87a31c6409 GCS_MAVLink: don't recalculate max parameter count if not streaming params 2020-02-18 10:33:41 +11:00
Peter Hall b1742b4e19 GCS_Mavlink: constrain battery current to avoid wrap 2020-02-12 08:04:39 +11:00
Andrew Tridgell f7eba43cb8 GCS_MAVLink: raise ftp stack size to 3072 from 1024
this prevents memory corruption on directory listing
2020-02-11 13:32:17 +11:00
Peter Hall ba811052f8 GCS_Mavlink: report on fence limiting 2020-02-04 10:24:33 +09:00
Randy Mackay 7a5f57f940 GCS_MAVLink: send rc output mode banner to GCS 2020-02-04 12:23:33 +11:00
Peter Barker 1650979a2b GCS_MAVLink: add support for MAV_CMD_DEBUG_TRAP 2020-01-29 10:27:01 +11:00
Andrew Tridgell 0e7ddebd15 GCS_MAVLink: fix for updated mavlink extensions 2020-01-29 08:16:59 +11:00
Peter Barker e248bdfb16 GCS_MAVLink: split statustexts into 50-byte chunks using mav2 extensions 2020-01-28 19:56:38 +11:00
Peter Barker 8fc64ccbe9 GCS_MAVLink: allow NavEKFs to be compiled out 2020-01-21 11:53:18 +11:00
Peter Barker a9f62f196e GCS_MAVLink: consolidate places we snprintf statustexts 2020-01-14 10:38:43 +11:00
Andrew Tridgell 8ae5dffd31 GCS_MAVLink: fixed valgrind error in mission upload
affects DO_JUMP
2020-01-11 08:29:34 +11:00
Randy Mackay 188fdfb1b8 GCS_MAVLink: send optflow message even if no height estimate 2020-01-06 11:36:43 +09:00
Andrew Tridgell 1b528137f7 GCS_MAVLINK: cope with AP_Frsky_Telem being created after init
may be created by the FPort backend
2020-01-02 09:52:57 +11:00
murata 91e09338ea GCS_MAVLInk: Judgment of non-existence value by PARAM_SET 2019-12-31 10:12:01 +11:00
Andrew Tridgell c6322c7c98 GCS_MAVLink: send abs throttle in VFR_HUD 2019-12-24 15:14:03 +11:00
Peter Barker 01710c035e GCS_MAVLink: handle proximity and rangefinder messages 2019-12-24 12:08:54 +11:00
Oliver Walters 5fa54f3986 GCS_MAVLink: added support for Piccolo CAN ESCs 2019-12-22 09:48:40 +11:00
Peter Barker d1bbe4f03b GCS_MAVLink: correct output when ROUTING_DEBUG is set
This is a define in the code itself, so rarely a problem
2019-12-20 10:00:07 +11:00
Andrew Tridgell dd73eac08c GCS_MAVLink: support MAV_CMD_FIXED_MAG_CAL_YAW 2019-12-18 17:20:37 +11:00
Peter Barker ebbcd00873 GCS_MAVLink: send statustext to all GCSs until update_send is called
until update_send it called we don't mark channels as streaming, so
send_statustext won't send to that channel.

Calculating the streaming mask could have been done as part of the init
call, but this fix may allow for information getting to the user in the
case that the streaming parameters are all zero, too.
2019-12-18 14:36:58 +11:00
Andrew Tridgell f8f591c7db GCS_MAVLink: fixed critical error on prefight cal ops 2019-12-13 09:30:48 +11:00
Randy Mackay 6d94d2b62f GCS_MAVLink: remove send-text re allocating for fence 2019-12-10 08:51:19 +11:00
Peter Barker b48da34c61 GCS_MAVLink: move setting of GPS SYS_STATUS bits up to base class 2019-12-05 13:02:19 +11:00
Andrew Tridgell 1eebae2346 GCS_MAVLink: use new SERIAL_CONTROL_SERIALn enums 2019-12-01 12:48:23 +11:00
Peter Barker 314ea32ede GCS_MAVLink: any internal error means MAV_STATE_CRITICAL 2019-11-27 14:27:53 +11:00
Marian Soban 6e961b55eb GCS_MAVLink: LTM telemetry support 2019-11-26 12:14:13 +11:00
Peter Barker a96a4c0510 GCS_MAVLink: correct encoding used for send_to_components
These have to be packed onto the channel - otherwise they may ge
tencoded as mavlink1 instead of mavlink2 (or vice-versa)
2019-11-26 12:10:12 +11:00
Michael du Breuil 7582a5b4a4 GCS_MAVLink: Send GPS logging as part of the logging status bits 2019-11-20 11:06:16 -07:00
Andrew Tridgell 2b27cd2ce9 Plane: Add EFI Support 2019-11-17 20:10:54 +11:00
Andrew Tridgell 00e3344321 GCS_MAVLink: add EFI_STATUS message 2019-11-17 20:10:54 +11:00
Peter Barker 7d2557b316 GCS_MAVLink: correct txspace return value issues
- checking of space in send_to_active_channels was incorrect - did not
take into account locked status of the channel

 - corrected return value on comm_get_txspace - took a uint32_t, cast it
to int16_t, checked it for zero, then cast it to uint16_t on return.
That's just... odd.
2019-11-12 16:33:12 +11:00