Commit Graph

15116 Commits

Author SHA1 Message Date
Andrew Tridgell 25c7ee4d42 AP_HAL_SITL: added SIM_GPS_ALT_OFS
this is used to give a bad GPS height in SITL, which is very useful for
testing origin vs home issues
2017-09-18 10:24:45 +10:00
Steven Josefs 6e0ff8b169 AP_Proximity: add support for RP Lidar A2
This is a 360degree lidar with up to 16m range
2017-09-18 08:28:11 +09:00
Dr.-Ing. Amilcar Do Carmo Lucas 882c4f4052 AP_SerialMananger: add RP-Lidar A2 2017-09-18 08:28:09 +09:00
liorosh f2b7dc74d7 AP_Baro: Adding a new LPS25H Barometer driver
The following is a Barometer sensor driver for the LPS25H Barometer that
is integrated in the 96Boards STM32 Sensor mezzanine board.
the update includes the .cpp and .h files of the driver as well as the
updates required in AP_Baro.cpp.
2017-09-16 21:08:06 +10:00
chobitsfan 02cfe9128d AP_GPS: parse RTK status in NMEA GGA message 2017-09-15 22:33:47 +01:00
Michael du Breuil 2f8f2ffd2d AP_GPS: Remove NMEA init blobs for binary drivers
All of the init strings that were sent in the NMEA driver are for GPS protocols
which have binary drivers, which provide far more features and are more robust.
It also appears that due to driver changes the config strings for SIRF/UBLOX
were no longer correct anyways).
2017-09-15 14:30:48 -07:00
Randy Mackay 6d15a72f3a AP_SmartRTL: complete rename to SmartRTL 2017-09-15 08:58:14 +09:00
Dr.-Ing. Amilcar Do Carmo Lucas d3a18e803e AP_GPS: Fix MAVLink message field SYSTEM_TIME.time_unix_usec when GPS_AUTO_SWITCH = blend
The mavlink message field SYSTEM_TIME.time_unix_usec works fine with GPS_AUTO_SWITCH == 0 (no switch) or ==1 (usebest)
But when GPS_AUTO_SWITCH == 2 (blend) then state[GPS_BLENDED_INSTANCE].last_gps_time_ms gets initialized with 0 and never rewritten.

The consequence: SYSTEM_TIME.time_unix_usec gets stuck at zero.
The solution: Do not reset state[GPS_BLENDED_INSTANCE].last_gps_time_ms because it would overwrite the correct value already set on line 1149
2017-09-14 12:38:30 +01:00
Dr.-Ing. Amilcar Do Carmo Lucas e03826890a AP_GPS: Fix typo in comment 2017-09-13 14:22:57 -07:00
Tom Pittenger 1c223b520c AP_ADSB - update description of ADSB_RF_SELECT to say Rx-only devices are always in Rx mode 2017-09-13 13:46:21 -07:00
Michael du Breuil 0bbbb3d08d AP_AdvancedFailsafe: Allow landing to be a termination action 2017-09-13 13:15:08 -07:00
Michael du Breuil 40f49733ea AP_Landing: Support usage for termination 2017-09-13 13:15:08 -07:00
Michael du Breuil bde1b6e886 AP_Arming: Collapse GPS checks into the same branch 2017-09-13 13:36:40 +01:00
Michael du Breuil 3ab9b75df0 AP_Arming: Check GPS update rate as part of the GPS checks 2017-09-13 13:36:40 +01:00
Michael du Breuil cf02204e6c Dataflash: Log GPS delta times
This is particularly useful for assessing if a GPS actually is dropping out in a users log, or if the log is just dropping messages
2017-09-13 13:36:40 +01:00
Michael du Breuil 04eb7f411e AP_GPS: Track the delta time between the last GPS positions 2017-09-13 13:36:40 +01:00
Lucas De Marchi 58dec08b29 GCS_MAVLink: fix non static perf counter
Commit b9877e0d38
(GCS_MAVLink: make per channel perf counter non-static) made the
perf counters to be available per instance but missed the fact that
the perf infra doesn't copy the string.

Fix this by maintaining a the string inside the object.
2017-09-12 17:24:31 -07:00
Lucas De Marchi 13f4ba7392 AP_HAL: remove raspilot 2017-09-12 15:06:19 -07:00
Lucas De Marchi 15bfa940a7 AP_Notify: remove raspilot 2017-09-12 15:06:19 -07:00
Lucas De Marchi caa4e3ee89 AP_InertialSensor: remove raspilot 2017-09-12 15:06:19 -07:00
Lucas De Marchi b1740e2d9c AP_Compass: remove raspilot 2017-09-12 15:06:19 -07:00
Lucas De Marchi 7ba82ff23a AP_HAL_Linux: remove raspilot
It's not being sold, there are just a few (different) engineering
samples built and there are no plans for this to go forward for people
that were pushing it.
2017-09-12 15:06:19 -07:00
Peter Barker b4e536b424 GCS_MAVLink: move gcs_out_of_time into GCS object 2017-09-12 18:28:07 +01:00
Andrew Tridgell 697131e94a AP_Notify: support dual I2c toshiba LEDs
This restructures AP_Notify to allow for multiple backends of the same type.
2017-09-11 10:39:39 -07:00
Francisco Ferreira 4398be2275 AP_HAL_Linux: remove URUS 2017-09-11 10:04:11 -07:00
Francisco Ferreira 51a8aa3d1f AP_HAL: remove URUS 2017-09-11 10:04:11 -07:00
Lucas De Marchi b9877e0d38 GCS_MAVLink: make per channel perf counter non-static
Otherwise the perf counter from one channel may affect the other if
during an update of one channel the update function of the other gets
called.
2017-09-11 10:01:57 -07:00
Lucas De Marchi d5f57fdd93 AP_Compass: AK8963: remove fallback to timer thread
Now that the bus thread from the AuxiliaryBus is implemented we can
remove the fallback.
2017-09-11 09:52:41 -07:00
Lucas De Marchi 06fe5ce8ba AP_InertialSensor: implement periodic thread for AuxiliaryBus 2017-09-11 09:52:41 -07:00
Peter Barker 4263c1a90c DataFlash: file not being initialised means logging is failed 2017-09-11 17:42:38 +01:00
squilter cb0f50a1c8 AP_SmartRTL: renamed from SafeRTL 2017-09-09 14:05:41 +09:00
Randy Mackay 4415a6b052 AP_SafeRTL: update example sketch
remove pruning test because this is always performed after simplification
modify expected results to match latest algorithm
2017-09-09 14:05:41 +09:00
Randy Mackay 939ca36c33 AP_SafeRTL: simplify and prune regularly
remove overlapping prunable loops (keeps longest loop)
replace use of Bitmask calls with flag
restart_pruning protection against overflow
remove argument to reset_simplification and reset_pruning
fix setting _simplify.path_points_completed
fix add_loop - compare length of new loop to sum of all existing loops that would be
replaced
add program error protection - an overflow of the path_points_count index is dangerous so although it should never happen, if it does, deactivate
reduce the simplify and prune path-points-completed numbers as points are popped off the path so that if the user aborts the SafeRTL simplification and pruning process any new points added aftwards
2017-09-09 14:05:41 +09:00
Randy Mackay 5d977cf799 AP_SafeRTL: check semaphore allocation
Remove redundant position_ok check from update
Reorder timeout checks in update

These are in fixes from WickedShell's review, thanks!
2017-09-09 14:05:41 +09:00
Randy Mackay 811e115a21 AP_SafeRTL: move simplify and prune state into structures 2017-09-09 14:05:41 +09:00
Randy Mackay e0da7ed09c AP_SafeRTL: fixes from peer review
- ACCURACY parameter description
- SafeRTL comments reduced to fit 80 characters
- moved a Comment down a line
- renamed definition to SAFERTL_PRUNING_LOOP_TIME_US
- comment change of "algorithm" to "algorithms"
- removed destructor (same could be done for AP_Airspeed then)
- updated GCS message to, "failed to save initial point"
- "update" comment modified from "a couple" to "several"
- added "const" ahead of "now = AP_HAL::millis()"
- added new deactivate method
- const run_background_cleanup's path_points_count
- removed unnecessary "return } else {"
- const potential_amount_to_simplify
- s/as/has in comments
- zero_points_by_simplify_bitmask starts from path[1] so as to never remove the start point
- remove_empty_points gets for loop in place of while, inverted clauses
- clarified dist_point returns value FLT_MAX in distance field
- lots of "const" added to segment_segment_dist, removed unnecessary else
- reference in Log_action.  Can't do it because want default
- ::update() comments add "3hz"
2017-09-09 14:05:41 +09:00
squilter f094cb57f7 AP_SafeRTL: library to return to home along safe path 2017-09-09 14:05:41 +09:00
Randy Mackay 2aa1f3f100 AP_Math: replace divide with multiply in distance_to_segment 2017-09-09 14:05:41 +09:00
Randy Mackay e892bbbac0 AP_Math: add Vector3f::distance_to_segment 2017-09-09 14:05:41 +09:00
squilter 1a9bccaaa7 AP_Common: fix Bitmask out-of-range values 2017-09-09 14:05:41 +09:00
Randy Mackay 963c9c93fe AP_Common: constify bitmask 2017-09-09 14:05:41 +09:00
Randy Mackay e6328c350d AP_Math: add Vector3f::distance_squared 2017-09-09 14:05:41 +09:00
Randy Mackay f187df225a AP_Common: add setall, count and size methods to Bitmask 2017-09-09 14:05:41 +09:00
squilter da7aa36f2d AC_WPNav: add set_wp_destination_NED to accept target in meters NED 2017-09-09 14:05:41 +09:00
squilter f37d742160 DataFlash: support SafeRTL log messages 2017-09-09 14:05:41 +09:00
Andrew Tridgell 99aad41955 AC_AttitudeControl: added a update_vel_controller_xy() API
this allows for just XY control of velocity for quadplanes
2017-09-09 08:14:09 +10:00
Peter Barker b8d3d180d1 AP_BoardConfig: clarify board type 2 also to be used on the Cube autopilot 2017-09-08 18:02:34 +01:00
davidaroyer ad18e99bef AP_Compass: add support for Aerotenna OcPoC-Zynq hardware 2017-09-08 07:30:49 -07:00
davidaroyer 7d2e44862f AP_HAL_Linux: add support for Aerotenna OcPoC-Zynq hardware 2017-09-08 07:30:49 -07:00
davidaroyer 8862e76284 AP_HAL: add support for Aerotenna OcPoC-Zynq hardware 2017-09-08 07:30:49 -07:00
Georgii Staroselskii e79fc893fa AP_HAL_Linux: HAL_Linux_Class: delay SPIUARTDriver static initialization
There's an implicit (apart from the name) dependency between SPI and
SPIUARTDriver which results in a crush on a restart or a shutdown.

By moving the initialization we're making sure that all objects are
deleted in the right order.
2017-09-08 07:26:54 -07:00
Georgii Staroselskii 226eeeb738 AP_HAL_Linux: RCOutput_Sysfs: fix deleting _pwm_channels array
delete [] should be called rather than delete.
2017-09-08 07:26:54 -07:00
Georgii Staroselskii f6858821a6 AP_HAL_Linux: PWM_Sysfs: remove unneeded free() in ~PWM_Sysfs_Base
_export_path and _duty_path will have been already long time gone by the
time dtors kick in.

Probably better to use OwnPtr around those. But it's better to be done
in a separate PR.
2017-09-08 07:26:54 -07:00
VikingDai 9f0e8a64d5 Update HAL_PX4_Class.cpp
"ttys5" used both for console and common usart ,it should be initialized by AP_SerialManager ;
2017-09-08 10:33:40 +10:00
Michael du Breuil fb77d0739e AP_Compass: Remove unused time calls, stash the time in the read loop 2017-09-07 19:53:14 +01:00
Peter Barker 85ebe923b6 SITL: avoid FPE when running fly.ArduPlane
Program received signal SIGFPE, Arithmetic exception.
__expf_finite () at ../sysdeps/x86_64/fpu/e_expf.S:132
132     ../sysdeps/x86_64/fpu/e_expf.S: No such file or directory.
(gdb) u
2017-09-06 20:22:52 +10:00
Peter Barker 97b6ca218b AP_AHRS: send ekf status reports even when EKF inactive 2017-09-06 10:50:49 +10:00
Michael du Breuil be371e09f9 AP_GPS: SBF: Reject short packets early, allow 256 byte long messages to be decoded 2017-09-06 10:41:36 +10:00
Andrew Tridgell 048dfee68a AP_GPS: make SBF driver more robust
this fixes a crash bug in the SBF GPS driver where a badly formed packet
could cause crc16_ccitt to reference invalid memory
2017-09-06 10:41:33 +10:00
Lucas De Marchi b62e8909c4 AP_GPS: add missing fallthrough 2017-09-01 13:45:22 -07:00
Lucas De Marchi cb9c626577 AP_ADSB: fix getting a copy rather than a reference
These have been caught by making constructors private and enforcing
calling a create() method to create objects are supposed to be
statically allocated only.

The Vector3f reference was just nearby and was a change copied from
similar PR from Peter Barker (#6873).
2017-09-01 13:45:22 -07:00
Lucas De Marchi 2c72fc94ba AP_HAL: change aerofc baud to 921600 2017-09-01 07:55:47 -07:00
Peter Barker 698f18566b AP_Terrain: cast to int32_t to avoid warning about signedness
../../libraries/AP_Terrain/TerrainIO.cpp: In member function ‘void
AP_Terrain::open_file()’:
../../libraries/AP_Terrain/TerrainIO.cpp:176:46: warning: format ‘%u’
expects argument of type ‘unsigned int’, but argument 5 has type
‘__gnu_cxx::__enable_if<true, double>::__type {aka double}’ [-Wformat=]
              abs((uint32_t)block.lon_degrees));
                                              ^
../../libraries/AP_Terrain/TerrainIO.cpp:176:46: warning: format ‘%u’
expects argument of type ‘unsigned int’, but argument 7 has type
‘__gnu_cxx::__enable_if<true, double>::__type {aka double}’ [-Wformat=]
2017-09-01 13:30:56 +01:00
Peter Barker 6ad3541a24 DataFlash: clean up public interface 2017-09-01 10:58:07 +01:00
Peter Barker ac806b650f GCS_MAVLink: move handling of do_send_banner up 2017-08-30 15:54:47 +01:00
Peter Barker 1544a92f8b GCS_MAVLink: factor out a send_banner 2017-08-30 15:54:47 +01:00
Peter Barker 2e078f7c5e GCS_MAVLink: send fw_string, px4 git hash and nuttx hash on param request 2017-08-30 15:54:47 +01:00
Peter Barker 8a7a1b77dd GCS_MAVLink: handle param_request_list in GCS_MAVLINK base class 2017-08-30 15:54:47 +01:00
Peter Barker 50242178b3 GCS_MAVLink: handle param_set in GCS_MAVLINK base class 2017-08-30 15:54:47 +01:00
Peter Barker 95ff94bfad GCS_MAVLink: factor out a handle_common_param_message 2017-08-30 15:54:47 +01:00
Peter Barker add1743c12 GCS_MAVLink: move send_autopilot_request calls up to GCS base class 2017-08-30 15:54:46 +01:00
Peter Barker e9204a66ee GCS_MAVLink: include version for AP_FWVersion 2017-08-30 15:54:46 +01:00
Peter Barker f32651a38c DataFlash: include version for AP_FWVersion 2017-08-30 15:54:46 +01:00
Peter Barker 445777429b AP_FWVersion: add structure to hold firmware version 2017-08-30 15:54:46 +01:00
Randy Mackay aaac6b3692 AP_Common: Bitmask formatting fix 2017-08-30 20:07:04 +09:00
ChrisBird 46c982d64f AP_Mission: add OPTIONS parameter
First option added now is to clear the mission on reboot
Fixes #5743
2017-08-29 21:28:19 +01:00
Michael du Breuil a895d69b42 GCS_MAVLink: Correct a bug in the FOR_EACH_ACTIVE_CHANNEL macro 2017-08-29 13:27:27 -07:00
Jacob Walser e492c733d8 AP_Baro: fixup Keller LD comments 2017-08-29 12:30:32 -04:00
Michael du Breuil db6d8c9c43 AP_Mission: Use a static assert to check content size 2017-08-29 14:37:56 +01:00
Jacob Walser f4dfbb9dad AP_JSButton: input_hold_toggle -> input_hold_set 2017-08-29 08:10:05 -04:00
Jacob Walser 07e00de549 AP_Baro: Tweak Keller LD driver for better performance after initial tests 2017-08-29 08:08:16 -04:00
Jacob Walser 2a71afd3ba AP_Baro: Remove superfluous casts 2017-08-29 08:08:16 -04:00
Jacob Walser a08da4ecc4 AP_Baro: New AP_Baro_Keller device driver 2017-08-29 08:08:16 -04:00
Andrew Tridgell 7e1368f7a5 AP_InertialSensor: implement notch filter on gyro 2017-08-29 13:52:29 +10:00
Andrew Tridgell 50dcca39bd Filter: added a notch filter
maths from Leonard
2017-08-29 13:52:29 +10:00
Peter Barker 0f22f923e1 AC_InputManager: remove MAIN_LOOP_RATE in favour of parameter value 2017-08-29 08:41:07 +09:00
Andrew Tridgell 4aa068d63d SITL: added simple launch sim for plane
allow for bungee, catapult and hand launches
2017-08-29 07:35:04 +10:00
Peter Barker 9783c0c3ba DataFlash: log dataflash-file statistics periodically 2017-08-28 22:05:44 +01:00
Peter Barker 776d88bb6b DataFlash: remove duplicate variables 2017-08-28 22:05:44 +01:00
Andrew Tridgell 29fe432dd7 AP_SerialManager: enable debug console use for other protocols
this allows SERIAL5_PROTOCOL to be set on FMUv2 and FMUv3 for use by
other protocols
2017-08-28 17:57:28 +10:00
Andrew Tridgell d09b549144 HAL_PX4: allow uart5 to be used for non-nsh on FMUv2/FMUv3 2017-08-28 17:57:28 +10:00
Andrew Tridgell 0155434057 RC_Channel: fixed bug in manual with TRIM == MIN
This fixes the bug described here:

https://discuss.ardupilot.org/t/arduplane-reverse-thrust-setup/18324/5

which otherwise would prevent output with TRIM == MIN or TRIM == MAX
2017-08-26 20:30:54 +10:00
Peter Barker 2f9fb581fe DataFlash: remove bad FALLTHROUGH causing compilation failure 2017-08-24 15:49:15 +09:00
Peter Barker 921985fe27 GCS_MAVLink: allow statustext logging from any source system
Turns out this is terribly useful for companion computers if
you allow them to log things when they're not your GCS.

The original check was bogus; if someone is talking to you via
mavlink they can do much worse than fill your logs!
2017-08-23 15:58:47 +01:00
Jacob Walser e8f5967682 GCS_MAVLink: Add MSG_NAMED_FLOAT ap_message id 2017-08-23 13:40:52 +01:00
Lucas De Marchi 3414883f05 AP_GPS: remove tabs and fix coding style 2017-08-22 23:59:13 -07:00
Lucas De Marchi 927289aa64 DataFlash: use FALLTHROUGH define
When falling through on a case switch, allow to add an empty statement
with the correct attribute to tell the compiler this behavior is
intended.
2017-08-22 23:59:13 -07:00
Lucas De Marchi 7b0d6166e1 AP_RangeFinder: use FALLTHROUGH define
When falling through on a case switch, allow to add an empty statement
with the correct attribute to tell the compiler this behavior is
intended.
2017-08-22 23:59:13 -07:00
Lucas De Marchi b37ca322f1 AP_Landing: use FALLTHROUGH define
When falling through on a case switch, allow to add an empty statement
with the correct attribute to tell the compiler this behavior is
intended.
2017-08-22 23:59:13 -07:00
Lucas De Marchi 0e502d89a3 AP_HAL: use FALLTHROUGH define
When falling through on a case switch, allow to add an empty statement
with the correct attribute to tell the compiler this behavior is
intended.
2017-08-22 23:59:13 -07:00
Lucas De Marchi 8389158d76 AP_GPS: use FALLTHROUGH define
When falling through on a case switch, allow to add an empty statement
with the correct attribute to tell the compiler this behavior is
intended.
2017-08-22 23:59:13 -07:00
Lucas De Marchi 7c6f9a004e AP_Baro: use FALLTHROUGH define
When falling through on a case switch, allow to add an empty statement
with the correct attribute to tell the compiler this behavior is
intended.
2017-08-22 23:59:13 -07:00
Lucas De Marchi e2e836f676 AP_Airspeed: use FALLTHROUGH define
When falling through on a case switch, allow to add an empty statement
with the correct attribute to tell the compiler this behavior is
intended.
2017-08-22 23:59:13 -07:00
Lucas De Marchi 3102247a85 AP_Common: add FALLTHROUGH define 2017-08-22 23:59:13 -07:00
Randy Mackay e13f4d0d56 DataFlash: removed unused optFlowEnabled from Log_Write_EKF 2017-08-23 11:19:14 +09:00
Randy Mackay 59ffc3cd65 AP_OpticalFlow: minor order declaration change
non-functional change
2017-08-23 11:19:14 +09:00
Randy Mackay cf24eef359 AP_OpticalFlow: init checks if enabled 2017-08-23 11:19:14 +09:00
Randy Mackay bc38affcb1 AP_OpticalFlow: px4flow retries init 10 times at startup
This resolves an issue in which some px4flow sensors are slow to startup
2017-08-23 11:19:14 +09:00
Randy Mackay fdb4c7b5ee AP_OpticalFlow: failure to init leaves enabled unchanged 2017-08-23 11:19:14 +09:00
Randy Mackay a7afffe14a AP_OpticalFlow: rename BUS_ID parameter to ADDR
This makes the parameter more consistent with RangeFinder
2017-08-23 11:19:14 +09:00
chobits d6845a911a AP_AHRS: fix get_relative_position_NE_home calcalation 2017-08-19 10:23:24 +09:00
Lucas De Marchi 66a1e420cb AP_HAL_Linux: RCInput_SoloLink: better name to first field
Checking the time on the tcpdump capture, it matches the first fields
from the data:

$ tshark -n -c 4 -r  ~/tmp/solo/rc.pcap
    1   0.000000     10.1.1.1 → 10.1.1.10    UDP 68 5005 → 5005 Len=26
    2   0.019976     10.1.1.1 → 10.1.1.10    UDP 68 5005 → 5005 Len=26
    3   0.040046     10.1.1.1 → 10.1.1.10    UDP 68 5005 → 5005 Len=26
    4   0.059961     10.1.1.1 → 10.1.1.10    UDP 68 5005 → 5005 Len=26

From the previous commit (first 2 packets):

     5fa8 f441 3414 0500 73d7  dc05 dc05 dc05 db05 e803 e803 e803 f401
     73f6 f441 3414 0500 74d7  dc05 dc05 dc05 db05 e803 e803 e803 f401

0x0005143441f45fa8 - 0x0005143441f4f673 = 0x4E14 = 19988 (usec)

Which seems to approximately match for the other packets as well. We are
not using the field since we rather get the time when we receive it, but
at least use a better name.
2017-08-17 12:04:27 -07:00
Lucas De Marchi 373d41fd6e AP_HAL_Linux: switch aero to RCInput_SoloLink 2017-08-17 12:04:27 -07:00
Lucas De Marchi 79b004cf6a AP_HAL_Linux: add prototype for handling SoloLink
This allows to use a Solo controller to control Linux-based flight
controllers. The protocol has been derived by analyzing a tcpdump
trace: some fields are ignored. Example trace of RC data (obtained
with `tshark -T fields -e data -n -c 5 -r  rc.pcap`

 unkonwn              seq   ch1  ch2  ch3  ...                ch8
 5fa8 f441 3414 0500 73d7  dc05 dc05 dc05 db05 e803 e803 e803 f401
 73f6 f441 3414 0500 74d7  dc05 dc05 dc05 db05 e803 e803 e803 f401
 dc44 f541 3414 0500 75d7  dc05 dc05 dc05 db05 e803 e803 e803 f401
 bc92 f541 3414 0500 76d7  dc05 dc05 dc05 db05 e803 e803 e803 f401
 dfe0 f541 3414 0500 77d7  dc05 dc05 dc05 db05 e803 e803 e803 f401
2017-08-17 12:04:27 -07:00
Peter Barker 154b212545 GCS_MAVLink: move serial_control case to base class 2017-08-17 12:42:31 +01:00
Peter Barker b17c0482fb GCS_MAVLink: move play_tune and led_control handling to base class 2017-08-17 12:27:10 +01:00
Peter Barker 23d91c93c8 AP_HAL_Linux: correct compilation warning
../../../libraries/AP_HAL_Linux/RCInput_RPI.cpp:129:35: warning: ignoring return value of ‘ssize_t read(int, void*, size_t)’, declared with attribute warn_unused_result [-Wunused-result]
         ::read(file, &pageInfo, 8);
2017-08-17 11:28:36 +01:00
Randy Mackay 222dd0c9be AC_WPNav: correct comments
all position vectors are offsets from the ekf origin (not from the ahrs home)
2017-08-17 16:05:08 +09:00
Jacob Walser b8e7d23cc4 AP_Arming: Add bool check_min_max parameter for Copter/Sub RC checks 2017-08-16 11:37:46 -04:00
Peter Barker 2a07a077d9 GCS_MAVLink: use GCS_MAVLINK subclasses to handle set_mode 2017-08-16 11:05:37 +10:00
Peter Barker 48c4e48225 AP_HAL_PX4: send statustext for RC input decoding type 2017-08-15 22:04:00 +01:00
Mateusz Sadowski eb56a010b3 AP_RangeFinder: TeraRangerI2C: use address from parameter instead of hardcoded 2017-08-15 19:42:10 +01:00
Mateusz Sadowski 0993300506 AP_Rangefinder: rename trone to TeraRangerI2C 2017-08-15 19:27:49 +01:00
Peter Barker b6076bcb77 GCS_MAVLink: adapt to new rangefinder method name 2017-08-15 19:00:29 +01:00
Peter Barker 30c4ea8123 AP_RangeFinder: stop storing sensor type as a variable
And change method name
2017-08-15 18:58:16 +01:00
Peter Barker c79cbd71af GCS_MAVLink: use rangefinder backend accessors 2017-08-15 18:31:58 +01:00
Peter Barker f1d350bbb1 DataFlash: use rangefinder backend accessors 2017-08-15 18:30:45 +01:00
Peter Barker 63440800fc AP_NavEKF3: use rangefinder backend accessors 2017-08-15 18:30:45 +01:00
Peter Barker 1e83ef3c44 AP_NavEKF2: use rangefinder backend accessors 2017-08-15 18:30:45 +01:00
Peter Barker e0bea597c0 AP_Proximity: use rangefinder backend accessors 2017-08-15 18:30:45 +01:00
Peter Barker c0aa10d84b AP_RangeFinder: move rangefinder backend data accessors to backend 2017-08-15 18:30:45 +01:00
Michael du Breuil 067335f68d GCS_MAVLink: Handle termination requests from the GCS 2017-08-15 15:14:56 +01:00
Michael du Breuil 97c1785bef AP_AdvancedFailsafe: Allow the GCS to request terminations 2017-08-15 15:14:56 +01:00
Miguel Arroyo fc155eac7e AP_HAL_PX4: Adds UARTF as commandline option 2017-08-15 14:31:51 +01:00
JU Han eebef857f1 AP_TECS: gain scaler K_STE2Thr multiplies by (THRmax - THRmin)
Makes both feed forward and feed-back consistent
2017-08-15 14:27:43 +01:00
Randy Mackay 9f876dc7a0 AR_AttitudeControl: throttle and steering control library
Throttle controller has these advantages over existing controller:
based on velocity in vehicle's forward-back axis rather than ground-speed
straight-forward PID controller using speed error as input
speed control acceleration limts
stop control slows vehicle smoothly
configurable filtering

Steer controller has these advantages over existing controller:
output scaled properly for skid-steering vehicles
layered P and PID controller for angular error and rate control
configurable filtering
2017-08-15 20:47:19 +09:00
Peter Barker 7173025b43 AP_Arming: warn about uncalibrated throttle but do not fail check
We can tighten this check up later, and will allow us to use
this common function for Plane and Rover in the future
2017-08-14 15:32:25 +09:00
Peter Barker b2459c67d5 AP_Arming: move Copter RC checking code into library 2017-08-14 15:32:25 +09:00
Peter Barker e3599ab4f9 AP_Param: remove CLI 2017-08-14 10:23:50 +09:00
Peter Barker bff31e8b42 GCS_MAVLink: remove CLI 2017-08-14 10:23:50 +09:00
Andrew Tridgell 1a25087dd5 AC_AttitudeControl: fixed PIRO_COMP index
this is a new conflict due to stricter checking in AP_Param
2017-08-14 09:28:57 +09:00
Michael du Breuil 58e784024f AP_HAL_SITL: Add support for blocked pitot tube simulations 2017-08-10 20:15:35 +10:00
Michael du Breuil 4dbe282121 SITL: Add airspeed failure parameters 2017-08-10 20:15:35 +10:00
priseborough 2310cb6d19 AP_NavEKF3: Enable external control over use of GPS vertical velocity 2017-08-10 19:49:45 +10:00
priseborough f2f3067326 AP_NavEKF2: Add interface to control GPS vertical velocity use 2017-08-10 19:49:45 +10:00
Mark Whitehorn 3642ecd9ef AP_COMPASS: fix errors in addition of alternate LIS3MDL I2C address
testing shows ROTATION_YAW_90 is correct for mRo Neo M8N GPS/compass
2017-08-10 19:46:26 +10:00
Mark Whitehorn a6e9baa8f6 AP_Compass: probe for LIS3MDL in mRo Neo-M8N GPS module 2017-08-10 19:46:26 +10:00
Peter Barker 1fc82442a0 GCS_MAVLink: remove dummy functions; examples are linked with all libs 2017-08-09 16:18:22 +01:00
Peter Barker 7aaabea4ea GCS_MAVLink: send gps messages as separate queued messages 2017-08-09 16:18:22 +01:00
Peter Barker ee5874ab32 GCS_MAVLink: move sending of gps_raw up 2017-08-09 16:18:22 +01:00
Peter Barker 4e3cc6fd27 GCS_MAVLink: move sending of system_time up 2017-08-09 16:18:22 +01:00
Peter Barker d1a9128118 GCS_MAVLink: move sending of camera_feedback up 2017-08-09 16:18:22 +01:00
Peter Barker d03c7389f7 GCS_MAVLink: move sending of meminfo up 2017-08-09 16:18:22 +01:00
Michael du Breuil 5fca7d02b3 AdvancedFailsafe: Rework status texts to be more uniform 2017-08-09 15:39:17 +01:00
Peter Barker 127edce39e AP_RangeFinder: move prearm checks into backend 2017-08-09 13:58:53 +01:00
Peter Barker 0b1c67d170 AP_RangeFinder: remove unused parameters from detect and constructors 2017-08-09 13:58:53 +01:00
Peter Barker 08cd3f4a77 AP_RangeFinder: move instance parameters into instance state 2017-08-09 13:58:53 +01:00
Randy Mackay f995106c1e AC_PID: minor formatting change 2017-08-09 18:03:09 +09:00
Peter Barker a841fddb3e GCS_MAVLink: rename MSG_RETRY_DEFERRED to MSG_LAST and clarify comments 2017-08-05 23:13:48 +01:00
Peter Barker 0c5f66dc59 GCS_MAVLink: refactor code into new retry_deferred method 2017-08-05 23:11:09 +01:00
Peter Barker fdac13d3d3 GCS_MAVLink: tidy send_message function 2017-08-05 23:09:37 +01:00
Randy Mackay 164096225b AP_SteerController: fix get_steering_out_rate bug when reversing 2017-08-05 11:20:58 +09:00
Randy Mackay 638ba02d5f AP_Mission: add support for Set-Yaw-Speed command
This is initially only intended for use by Rover
2017-08-05 11:20:58 +09:00
Randy Mackay 42cab6b533 AP_LandingGear: add startup position selection parameter 2017-08-05 11:20:41 +09:00
Francisco Ferreira e0f4d3dbe5
AP_HAL: remove unused HAL_AIRSPEED_MS4515DO_I2C_BUS macro 2017-08-05 03:15:53 +01:00
Francisco Ferreira d3ed4420e6
AP_Airspeed: remove unused MS4525D0_I2C_BUS macro 2017-08-05 03:15:52 +01:00
Vinicius Juvinski 78deddabda AP_Airspeed: MS4525: Add support to I2C Bus 2
BBBMini use I2C Bus number 2 and MS4525 just use up to bus 1, so I
addedd this bus 2 to address struct.
2017-08-05 03:15:32 +01:00
José Roberto de Souza 9ee007f924 AP_HAL_PX4: Map PX4_I2C_BUS_EXPANSION1 2017-08-04 12:47:01 -07:00
José Roberto de Souza e674d6ee20 AP_HAL_PX4: aeorfc: Move GPS to UART7
The UART3 also have the I2C bus 2 functions so moving GPS to UART7 to
have one additional I2C.
To keep GPS working is also necessary update the FPGA RTL to version
0xC1 or higher.
2017-08-04 12:47:01 -07:00
Francisco Ferreira 6cf8791eb5
AP_Compass: correct comment in LIS3MDL driver
Commit 17f2393c1b decreased timer frequency but didn't change comment to match
2017-08-04 19:56:26 +01:00
Lucas De Marchi 5ea1784838 global: remove AP_HAL::in_timerprocess()
This is not used and in the only places it would make sense would be
internally to the scheduler so remove it.
2017-08-03 20:25:14 -07:00
Lucas De Marchi 08637f1dcc AP_HAL_VRBRAIN: Scheduler: replace use of in_timerprocess()
This function actually checks if we are not in the main thread rather
than if we are in the timer thread.

Add a new function that does what it's supposed to do.
2017-08-03 20:25:11 -07:00
Lucas De Marchi 1aaba01622 AP_HAL_QURT: Scheduler: replace use of in_timerprocess()
This function actually checks if we are not in the main thread rather
than if we are in the timer thread.

Add a new function that does what it's supposed to do.
2017-08-03 20:25:07 -07:00
Lucas De Marchi 9e66938f68 AP_HAL_PX4: Scheduler: replace use of in_timerprocess()
This function actually checks if we are not in the main thread rather
than if we are in the timer thread.

Add a new function that does what it's supposed to do.
2017-08-03 20:25:01 -07:00
Lucas De Marchi 93a558ce5c AP_HAL_Linux: do not call delay callbacks on other threads
If a thread other than the main one calls Scheduler::delay() we could
end up triggering the call of delay callbacks. Those should only ever
happen on the main thread.
2017-08-03 20:24:57 -07:00
Peter Barker ad2c3d27ec GCS_MAVLink: move try_send_message queued_param_send up 2017-08-03 14:34:33 +01:00
Peter Barker 679bb7f7a5 GCS_MAVLink: move try_send_message send_hwstatus up 2017-08-03 14:33:37 +01:00
Peter Barker 3b472ccc17 GCS_MAVLink: move try_send_message mission handling up 2017-08-03 14:24:47 +01:00
Peter Barker b8cb758fac GCS_MAVLink: move try_send_message compass message handling up 2017-08-03 14:24:46 +01:00
Lucas De Marchi e98fe2d7d5 AP_HAL: RingBuffer: add missing include 2017-08-02 21:10:55 -07:00
Lucas De Marchi 61aed0f0d7 RingBuffer: example: integrate with build system
It's only compatible with Linux so for now disable the other boards.
2017-08-02 16:08:55 -07:00
Murilo Belluzzo 641671a366 AP_HAL: Add simple stress test for RingBuffer class
It runs a Producer/Consumer thread pair endless reading and writing a
ByteBuffer. Producer writes a number sequence that is twice the
ByteBuffer size so a given position have a different data on each write
pass. Consumer makes sure that this pattern is not broken and aborts the
program if it is.

It is possible to spawn more pairs by informing a number as argument of
the program.
2017-08-02 15:30:35 -07:00
Lucas De Marchi dbd074b250 AP_HAL: remove register_timer_process with extra arg 2017-08-02 08:00:53 -07:00
Lucas De Marchi c170c2a847 AP_HAL_Linux: remove register_timer_process with extra arg
This is not used anymore.
2017-08-02 08:00:53 -07:00
Lucas De Marchi 6bab28397a AP_Compass: remove user of timesliced logic 2017-08-02 08:00:53 -07:00
Lucas De Marchi 0a158f6d3f AP_HAL_Linux: remove support for timesliced timer
This has long been replaced by the bus per thread scheme.
2017-08-02 08:00:53 -07:00
ljwang 5a7ec7d429 Delete write registers at start,using another way to repair 2017-08-02 16:15:14 +10:00
ljwang 648871a388 Fixed the QMC5883 identification,add check ID 2017-08-02 16:15:14 +10:00
Peter Barker b445313bf1 AP_Scheduler: remove loop-period argument from load_average
This now comes from a parameter rather than being hard-set
in the vehicle code

Also adds a method returning the max loop period based on the
loop rate
2017-08-01 19:39:27 +01:00
Michael du Breuil efe70c8d3a AP_NavEKF3: Fix possible compass nullptr dereference 2017-08-01 15:25:05 +01:00
Michael du Breuil dffa3d3b40 AP_NavEKF2: Fix possible compass nullptr dereference 2017-08-01 15:25:05 +01:00
Andrew Tridgell 99f5229a34 SRV_Channel: added copy_radio_in_out_mask() 2017-08-01 08:25:32 +10:00
Andrew Tridgell 1f1b4241c3 SRV_Channel: added get/set for reversed and function
these are needed in plane for auto-conversion of old elevon code
2017-08-01 08:25:32 +10:00
Andrew Tridgell 75999dbb39 SRV_Channel: prevent negative slew rate
thanks to Michael for pointing this out
2017-08-01 08:25:32 +10:00
khancyr 15398f8b0e AP_Math: correct variable init and remove define in polygon 2017-07-31 17:35:08 +09:00
Randy Mackay f5f6ec5238 AP_Arming: rename _MIN_VOLT to _VOLT_MIN
Also _MIN_VOLT2 to _VOLT2_MIN
2017-07-31 17:19:55 +09:00
Randy Mackay 2f3a57e0aa AP_Arming: minor variable type change
no functional change
2017-07-31 17:19:55 +09:00
Randy Mackay 330a6065ca AP_Arming: Copter gets MIN_VOLT parameters 2017-07-31 17:19:55 +09:00
Michael du Breuil 2894b7cbea L1_Control: Ensure that LIM_BANK passes a sea level sanity check
This fixes #6637 where the LIM_BANK can be set such that the vehicle demands a radius at sea level that is much higher then the loiter radius was configured to be. This effectively feels like a fly away and is due to bad parameters usually. If this happens just fall back to the simple EAS2TAS scaling of the radius.
2017-07-30 12:42:21 -07:00
Peter Barker 975d2fd0d1 DataFlash: add debug for io thread failure 2017-07-28 17:06:49 +01:00
Peter Barker b4688bd3d4 GCS_MAVLink: move common mavlink camera handling up 2017-07-28 14:32:58 +01:00
Peter Barker bb06b02df6 AP_Camera: add const to some parameters 2017-07-28 14:32:58 +01:00
Peter Barker a94bf851eb AP_Camera: use multiplication in place of division 2017-07-28 14:27:53 +01:00
Peter Barker 9390539231 AP_Camera: tidy up usage of trigger_pic 2017-07-28 14:27:53 +01:00
Peter Barker 84ef63edc7 AP_Camera: camera is responsible for taking distance-based-images and logging 2017-07-28 14:27:53 +01:00
Peter Barker 7f59279670 AP_GPS: make time_epoch_usec const 2017-07-28 14:27:53 +01:00
priseborough db7c8439c6 AP_NavEKF3: Fix bug in wheel odometry timestamp correction 2017-07-28 12:48:38 +09:00
Matt 5b605d6e1c AP_Notify: Fix for Oreo LED gyro init inidication
If parameter INS_GYRO_CAL is disabled, usually because operator is
arming on a moving vehicle such as a boat, the Oreo LEDs would wait
indefinitely for a gyro calibration that will never happen.  This
removes that dependency.  The LEDs will strobe blue only when gyros are
actually initializing. Not before.  Consequently, this greatly
simiplifies that portion of the code.
2017-07-27 20:43:58 +09:00
khancyr f583121433 AC_Fence: reset fences breach on disable
Also rename enable function parameter
2017-07-27 20:41:40 +09:00
Peter Barker e7ff5107fb AP_GPS: tidy mavlink message handling using switch statement 2017-07-27 12:03:25 +01:00
Peter Barker 2ad453fc89 AP_GPS: handle inject packets as part of handle_msg 2017-07-27 12:03:25 +01:00
Peter Barker 60ffe00164 GCS_MAVLink: move gps inject handling up
Also, make AP_GPS responsible for decoding inject packets
2017-07-27 12:03:25 +01:00
priseborough c7f6d52065 AP_NavEKF3: Add wheel encoder odometry
Uses the existing body frame odometry observation model.
Handles each sensored wheel as a separate sensor.
2017-07-27 16:52:27 +09:00
priseborough cbe8f97489 AP_NavEKF3: rename struct used for velocity odometry observations
Do this so we can add other odometry observation types.
2017-07-27 16:52:26 +09:00
priseborough 08a3f55c90 AP_NavEKF3: Fix error in scaling of observation error 2017-07-27 16:52:25 +09:00
priseborough 593437ca95 AP_NavEKF3: Add tuning of visual odometry observation error
Also adjust default values based on replay analysis.
2017-07-27 16:52:25 +09:00
Randy Mackay eaf8aad5ad AP_WheelEncoder: last_reading is last update time instead of system time 2017-07-27 14:19:08 +09:00
Randy Mackay 2c7b9d9cf7 AP_WheelEncoder: add get_delta_angle
The total angular change measured by the wheel encoder in radians
2017-07-27 14:19:08 +09:00
Randy Mackay a53e254bd0 AP_WheelEncoder: replace scaling with CPR and radius
CPR is the wheel encoder's counts per revolution of the wheel
radius is the radius of the wheel in meters
2017-07-27 14:19:08 +09:00
Randy Mackay cd71984705 AP_WheelEncoder: 3d position offset 2017-07-27 14:19:08 +09:00
Randy Mackay 1ddf38869a AP_AHRS: set AP_Notify gps_glitching flag 2017-07-27 14:16:23 +09:00
Randy Mackay 0d5c98ad45 AP_Notify: add gps glitch notification 2017-07-27 14:16:23 +09:00
Randy Mackay 9123b6034e SRV_Channel: update_aux_servo_function first checks function is valid
This resolves a bug in which the board could become unresponsive if an invalid function is selected
2017-07-27 11:09:57 +09:00
Patrick José Pereira 1eeea82e31 AP_Parachute: Add function to return _release_in_progress status
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2017-07-26 17:51:34 +01:00
Randy Mackay 572df8b859 SRV_Channel: minor formatting fixes
no functional change
2017-07-26 13:28:07 +09:00
Randy Mackay 298eaaeb3e SRV_Channels: rename SERVO_DEF_RATE to SERVO_RATE 2017-07-26 13:28:07 +09:00
Randy Mackay 687ec98e5d AP_HAL_PX4: set default servo update rate only when changed
This removes the chance a small switch occurring whenever this function is called
2017-07-26 13:28:07 +09:00
Peter Barker 85a0da6178 GCS_MAVLink: handle common GPS messages in base GCS_MAVLINK class 2017-07-25 14:00:45 +01:00
Randy Mackay a657daf635 Compass: disable QMC5883 compass driver by default
This driver causes occasional heading issues so disabling until these are resolved
2017-07-25 09:27:29 +09:00
khancyr 2d0bce18a8 AP_Baro: rename all local variable with prefix
fix last missing spaces
2017-07-24 10:15:15 -07:00
khancyr 35ac86ff8d AP_Baro: fix some style and const correctness 2017-07-24 10:15:15 -07:00
khancyr 0e895f5c74 AP_Baro: fix instance shadowing 2017-07-24 10:15:15 -07:00
khancyr 42516f7079 DataFlash: simplify Log_Write_Proximity 2017-07-24 13:44:43 +01:00
khancyr 8abcb7a0e3 GCS_MAVLink: simplify send_proximity 2017-07-24 13:44:43 +01:00
khancyr 603621f2c4 DataFlash: move proximity log from Copter (NFC) 2017-07-24 13:44:43 +01:00
khancyr ec2ea1c903 GCS_MAVLink: move send_proximity to GCS common code (NFC)
Also clean two comments
2017-07-24 13:44:43 +01:00
Andrew Tridgell 4ca3546551 SRV_Channel: added SERVO_DEF_RATE parameter
this allows for the default rate of servo outputs to be set. This is
needed for some planes where 50Hz isn't enough (eg. tailsitters)
2017-07-24 14:07:28 +10:00
Andrew Tridgell 5b43698e25 HAL_PX4: added rcout set_detault_rate() 2017-07-24 14:07:28 +10:00
Andrew Tridgell 0188d6463d AP_HAL: added rcout set_detault_rate() 2017-07-24 14:07:28 +10:00
Kevin Lopez Alvarez df406c4389 AP_Compass : increase max possible offset 2017-07-24 13:48:20 +10:00
Kevin Lopez Alvarez 17f2393c1b AP_Compass: Decrease LIS3MDL ODR and timer 2017-07-24 13:48:20 +10:00
Kevin Lopez Alvarez 16a96b0643 HAL_PX4: Adjust SPI params for ppro
Add SPI prescalers for 180 MHz and decrease LIS3MDL SPI speed
2017-07-24 13:48:20 +10:00
Kevin Lopez Alvarez 08b531e6a8 AP_Compass: LIS3MDL correct orientation 2017-07-24 13:48:20 +10:00
Kevin Lopez Alvarez cf8c1c2665 AP_Compass: Remove comments and use correct board number 2017-07-24 13:47:44 +10:00
Kevin Lopez Alvarez a5a5bd3a95 AP_BoardConfig: Remove comments and use correct board number 2017-07-24 13:47:06 +10:00
Kevin Lopez Alvarez ca3627c140 AP_InertialSensor: add ppro support 2017-07-24 13:47:06 +10:00
Kevin Lopez Alvarez 88958b2dbf HAL_PX4: add ppro support 2017-07-24 13:47:06 +10:00
Kevin Lopez Alvarez 1467daee2a AP_Compass: add ppro support
disable lis3mdl for now
2017-07-24 13:47:06 +10:00
Kevin Lopez Alvarez d6d1a3e08c AP_HAL_PX4: initial FMUv4pro support 2017-07-24 13:45:37 +10:00
Kevin Lopez Alvarez fb6f368575 AP_HAL: initial FMUv4pro support 2017-07-24 13:45:37 +10:00
Kevin Lopez Alvarez a51bf8c918 AP_BoardConfig: initial FMUv4pro support 2017-07-24 13:45:37 +10:00
Kevin Lopez Alvarez d0ec5a6111 AP_BattMonitor: initial FMUv4pro support 2017-07-24 13:45:37 +10:00
Kevin Lopez Alvarez 18dab4829a AP_Baro: initial FMUv4pro support 2017-07-24 13:45:37 +10:00
Andrew Tridgell 401a6f5373 AP_BoardConfig: fixed FMUv1 IO update
when doing an IO firmware update uartC is used to talk to the IO
bootloader. We need to close uartC to prevent corruption of the
bootloader protocol. The uart is automatically re-opened when it is
needed
2017-07-22 16:25:17 +10:00
Michael du Breuil 126296b61d AP_Arming: Compass calibration running is a pre arm failure, rather then an arming failure 2017-07-21 13:38:50 +09:00
Peter Barker 1fd4eb4bfb DataFlash: do not send in-progress messages back to streaming GCSs 2017-07-20 14:57:54 +01:00
Peter Barker 90c2db119e DataFlash: send log data on requesting channel only 2017-07-20 14:57:54 +01:00
Peter Barker 954eda990a AP_Arming: prepare log for arming and check it is ready
Also add comment that this should be the last check to be made
2017-07-19 16:37:28 +01:00
Peter Barker 0769432e63 DataFlash: move log-write-started logic to be backend-specific 2017-07-19 16:37:28 +01:00
Peter Barker 1f0a14ab33 DataFlash: add PrepForArming method 2017-07-19 16:37:28 +01:00
Peter Barker 31083653b2 DataFlash: examples: move starting of new logs into DataFlash 2017-07-19 16:37:28 +01:00
Francisco Ferreira a1115ba5d0
DataFlash: move some code from WritesOK into a new ShouldLog method 2017-07-19 16:37:21 +01:00
Peter Barker b572c13ca9 DataFlash: move starting of new logs into DataFlash 2017-07-19 16:37:16 +01:00
Peter Barker 4234f4ef7a DataFlash: move _initialised into DataFlash_Backend 2017-07-19 16:37:16 +01:00
Peter Barker 999a5e6cda AP_Arming: correct bit used to indicate blended-gps-checking 2017-07-19 16:34:57 +01:00
Peter Barker b8ddf8a289 AP_Arming: use HAL_HAVE_BOARD_VOLTAGE rather than magic-0 2017-07-19 16:34:57 +01:00
Dr.-Ing. Amilcar Do Carmo Lucas b791fef7cb AP_GPS: Publish the number of satellites in the RTK correction messages, and the age of the RTK correction messages 2017-07-19 20:42:23 +09:00
Dr.-Ing. Amilcar Do Carmo Lucas ae47ac5a09 AP_GPS: implement missing "RTK number of satellites" and "RTK correction age" information in the GPS2_RAW MAVLink message 2017-07-19 20:42:23 +09:00
Dr.-Ing. Amilcar Do Carmo Lucas 059c213d19 AP_GPS: Improve comments and documentation (NFC) 2017-07-19 20:42:23 +09:00
Randy Mackay cf47a0d563 AP_AdvancedFailsafe: minor formatting fix 2017-07-19 15:24:21 +09:00
Andrew Tridgell 732dc5984a AP_Compass: added COMPASS_TYPEMASK parameter
this allows driver type to be disabled, to avoid probing them and
wasting CPU on sensors that are not being used

This also moves UAVCAN compass to be detected last, as discussed in the
dev call
2017-07-19 15:53:22 +10:00
Michael du Breuil 5684a5dd36 AP_GPS: Only setup state's instance field during init 2017-07-18 21:21:50 +01:00
Michael du Breuil 52ddaa3e72 DataFlash: POS.RelOriginAlt should be NaN if unknown 2017-07-18 21:21:17 +01:00
Andrew Tridgell 82e7e44cc3 AP_GPS: fixed UAVCAN as 2nd GPS
This fixes the issue here:

  https://discuss.ardupilot.org/t/ac3-6-dev-dual-gps-issues/19172

thanks to Francisco for spotting the issue

this is tested with UAVCAN as 2nd GPS, ublox as primary
2017-07-18 18:57:55 +01:00
Peter Barker eb1cf0e73a GCS_MAVLink: remove MSG_STATUSTEXT entirely 2017-07-18 16:12:59 +01:00
Michael du Breuil e092a83ca2 AP_Landing: Deepstall: Allow requiring a minimum altitude to abort a landing 2017-07-17 08:43:50 -07:00
Michael du Breuil 202b40562f Landing: Fix bad deepstall parameter group 2017-07-17 08:43:50 -07:00
Michael du Breuil 8de96ee4a1 AP_Param: Check for duplicate group id's before handling groups 2017-07-17 08:43:50 -07:00
Peter Barker 06647cde2c GCS_MAVLink: move handling of PREFLIGHT_SET_SENSOR_OFFSETS up 2017-07-17 14:17:19 +01:00
Peter Barker bd28bdd907 GCS_MAVLink: move handling of MAG_CAL command longs up 2017-07-17 14:17:19 +01:00
Peter Barker 6b53b5b5f3 AP_Compass: make handle_mag_cal_command return type stricter 2017-07-17 14:17:19 +01:00
Peter Barker a7e57aa3fc GCS_MAVLink: move MAV_CMD_START_RX_PAIR handling to base class 2017-07-17 14:17:19 +01:00
priseborough 58d58b4eac AP_NavEKF3: Initialise EKF origin height to field elevation
Enables copters to set bit position 2 in the EK3_OGN_HGT_MASK parameter without having a large jump in reported local position height.
2017-07-17 02:22:02 +01:00
priseborough ac568bae53 AP_NavEKF2: Initialise EKF origin height to field elevation
Enables copters to set bit position 2 in the EK2_OGN_HGT_MASK parameter without having a large jump in reported local position height.
2017-07-17 02:22:02 +01:00
priseborough 0827b13feb AP_NavEKF3: Fix default behaviour for height origin corrections
Previous default was to apply in-flight height origin changes to local position instead of to reported origin height. This caused problems with copters that took off before getting GPS lock.
2017-07-17 02:22:02 +01:00
priseborough 027552ef44 AP_NavEKF2: Fix default behaviour for height origin corrections
Previous default was to apply in-flight height origin changes to local position instead of to reported origin height. This caused problems with copters that took off before getting GPS lock.
2017-07-17 02:22:02 +01:00
Peter Barker 318861e824 GCS_MAVLink: move mavlink support for servo/relay up 2017-07-16 23:56:00 +01:00
Peter Barker cfc8d7feba GCS_MAVLink: add common handling of mavlink command messages 2017-07-16 23:56:00 +01:00
Michael du Breuil 6b60c110a5 AP_Baro: Improve GND_TEMP parameter docs 2017-07-16 20:22:00 +01:00
Michael du Breuil 3dd47bff8b AP_BattMonitor: Allow generic SMBus batteries to not have cell voltages 2017-07-15 14:53:53 +01:00
Peter Barker 69eb9cbdd2 GCS_MAVLINK: add missing mavlink mission msgid to case 2017-07-15 17:01:18 +09:00
Michael du Breuil f14667225d AP_Baro: Avoid a FPE when ground pressure is negative 2017-07-15 10:49:16 +09:00
khancyr f60e7df309 AP_Proximity: correct missing use of PROXIMITY_MAX_DIRECTION 2017-07-14 18:59:36 +01:00
Andrew Tridgell 42181ee7c8 HAL_SITL: use SIM_GPS_LOCKTIME 2017-07-14 15:02:14 +10:00
Andrew Tridgell a7967e00e4 SITL: added SIM_GPS_LOCKTIME parameter 2017-07-14 15:02:12 +10:00
Siddharth Bharat Purohit 807ba9d520 HAL: use correct datatype for time conversion 2017-07-13 18:23:00 -07:00
Siddharth Bharat Purohit caf8dce75c HAL_VRBRAIN: use correct datatype for time conversion 2017-07-13 18:23:00 -07:00
Siddharth Bharat Purohit d1e0f9733e HAL_Linux: use correct datatype for time conversion 2017-07-13 18:23:00 -07:00
Siddharth Bharat Purohit 66a94f7a10 HAL_PX4: use correct datatype for time conversion 2017-07-13 18:23:00 -07:00
Peter Barker aa6b339252 GCS_MAVLink: improve rally debug strings 2017-07-14 01:28:05 +01:00
Peter Barker 99cc684d0a GCS_MAVLink: GCS_Rally: increase severity of mavlink statustexts
This matches plane, sending at an increased level
2017-07-14 01:28:05 +01:00
Peter Barker ebe3dcef6f GCS_MAVLink: move rally-point handling up 2017-07-14 01:28:05 +01:00
Peter Barker 1748e7cb0c AP_Baro: make backends responsible for setting their health
This resolves a problem in SITL where the barometer would
not change value for prolonged period of time, making it
go unhealthy
2017-07-14 07:28:48 +09:00
Randy Mackay d61731cdd6 AP_WheelEncoder: minor formatting fix 2017-07-14 07:27:26 +09:00
Randy Mackay d356e60269 AP_WheelEncoder: library to read from wheel encoders 2017-07-14 07:27:26 +09:00
Peter Barker 3338de827e GCS_MAVLink: remove unneeded telemetry_delayed parameter
Also make it protected
2017-07-12 17:02:54 +01:00
Peter Barker 129d7220e6 GCS_MAVLink: move handling of incoming statutext messages up 2017-07-12 16:52:24 +01:00
ljwang 603e903ccd AP_Compass: QMC5883 Add internal i2c bus and fix rotation error 2017-07-12 12:56:59 +10:00
Peter Barker ae6df4fc04 AC_Fence: remove global static send_statustext_chan 2017-07-11 23:53:53 +01:00
Peter Barker 5c0aa27b2f GCS_MAVLink: remove global static send_statustext_chan 2017-07-11 23:53:53 +01:00
Peter Barker a599bc9031 GCS_MAVLink: eliminate GCS_MAVLINK::send_statustext_all 2017-07-11 23:53:53 +01:00
Peter Barker f6a09d0657 DataFlash: eliminate GCS_MAVLINK::send_statustext_all 2017-07-11 23:53:53 +01:00
Peter Barker 33a974d7f5 AP_Tuning: eliminate GCS_MAVLINK::send_statustext_all 2017-07-11 23:53:53 +01:00
Peter Barker 85756b7226 AP_Terrain: eliminate GCS_MAVLINK::send_statustext_all 2017-07-11 23:53:53 +01:00
Peter Barker 196f94aaae AP_Soaring: eliminate GCS_MAVLINK::send_statustext_all 2017-07-11 23:53:53 +01:00
Peter Barker 93e09c51d3 AP_NavEKF3: eliminate GCS_MAVLINK::send_statustext_all 2017-07-11 23:53:53 +01:00
Peter Barker 5da3759ff4 AP_NavEKF2: eliminate GCS_MAVLINK::send_statustext_all 2017-07-11 23:53:53 +01:00
Peter Barker 35d8f11e46 AP_Motors: eliminate GCS_MAVLINK::send_statustext_all 2017-07-11 23:53:53 +01:00
Peter Barker eab60e6163 AP_Mission: eliminate GCS_MAVLINK::send_statustext_all 2017-07-11 23:53:53 +01:00
Peter Barker cc150f75c7 AP_Landing: eliminate GCS_MAVLINK::send_statustext_all 2017-07-11 23:53:53 +01:00
Peter Barker 1beb1550ae AP_IceEngine: eliminate GCS_MAVLINK::send_statustext_all 2017-07-11 23:53:53 +01:00
Peter Barker 76847a2487 AP_GPS: eliminate GCS_MAVLINK::send_statustext_all 2017-07-11 23:53:53 +01:00
Peter Barker 31ffc83f64 AP_Camera: eliminate GCS_MAVLINK::send_statustext_all 2017-07-11 23:53:53 +01:00
Peter Barker 4312d1a500 AP_BoardConfig: eliminate GCS_MAVLINK::send_statustext_all 2017-07-11 23:53:53 +01:00
Peter Barker 9e76223c34 AP_Arming: eliminate GCS_MAVLINK::send_statustext_all 2017-07-11 23:53:53 +01:00
Peter Barker 3214b48f8c AP_AirSpeed: eliminate GCS_MAVLINK::send_statustext_all 2017-07-11 23:53:53 +01:00
Peter Barker ad7cb6ef32 AP_AdvancedFailsafe: eliminate GCS_MAVLINK::send_statustext_all 2017-07-11 23:53:53 +01:00
Peter Barker e69bc5f46b AP_ADSB: eliminate GCS_MAVLINK::send_statustext_all 2017-07-11 23:53:53 +01:00
Peter Barker 69c7402c9c GCS_MAVLink: add const chan method to GCS_Dummy 2017-07-11 23:48:50 +01:00
Peter Barker 731aaed8af GCS_MAVLink: eliminate global static GCS_MAVLINK::send_home_all 2017-07-11 23:48:39 +01:00
Peter Barker 6cc19fee35 GCS_MAVLink: GCS_Dummy and GCS_routing get get_mission 2017-07-11 23:47:52 +01:00
Peter Barker 726007efde GCS_MAVLink: move common mission handling up to GCS_MAVLINK 2017-07-11 23:45:17 +01:00
Michael du Breuil cb1b9b6674 AP_GPS: Fix SBF race condition on start
Unsure what the underlying problem is, but the length of the first string in
the initilisation_blob increasing resulted in a race condition, waiting
longer before retrying the message resolves it, but we still need to identify
the underlying problem. This patch just results in the GPS working with current
configurations. Tested against AsteRx-M firmware 3.6.3
2017-07-11 09:40:02 +09:00
Jacob Walser 20889ff8a9 APMotors6DOF: Add motor reverse parameters for motors 9-12
Fix overruns found in coverity 145496-99
2017-07-11 09:34:40 +09:00
Andrew Tridgell dd7c96a6cc AP_Radio: reseve an ID for AP_Radio
as discussed with Randy
2017-07-10 17:07:36 +10:00
Randy Mackay bd2ba1565c AC_WPNav: minor format fix 2017-07-10 13:26:37 +09:00
Peter Barker 02532af64b GCS_MAVLink: a send_text method on the GCS singleton 2017-07-09 17:17:29 -04:00
Peter Barker ca6e34dfbd GCS_MAVLink: use Notify singleton for sending statustext 2017-07-09 17:17:29 -04:00
Peter Barker eb1f22fc67 AP_Notify: add singleton 2017-07-09 17:17:29 -04:00
Randy Mackay d636e85eac AP_Proximity: SF40c driver treats zero distances as invalid 2017-07-08 14:09:17 +09:00
Randy Mackay 6982e58cf2 Baro: health check that values are changing 2017-07-08 08:40:19 +09:00
Randy Mackay d64b2fcbf0 AP_NavEKF3: final mag reset at 2.5m 2017-07-08 08:39:43 +09:00
Randy Mackay 7e7f78d4b5 AP_NavEKF2: final mag reset at 2.5m 2017-07-08 08:39:43 +09:00
Peter Barker c1264cf60a DataFlash: Use GCS_Dummy GCS singleton 2017-07-07 16:18:37 +01:00
Peter Barker 3e0ed6deae AP_AHRS: Use GCS_Dummy GCS singleton 2017-07-07 16:18:37 +01:00
Peter Barker 3f43789742 GCS_MAVLINK: provide a GCS singleton for examples and tools to use 2017-07-07 16:18:37 +01:00
Peter Barker db27346fd7 GCS_MAVLink: move GCS functions up from GCS_Plane 2017-07-07 16:18:37 +01:00
Peter Barker c163915f6e AP_HAL: correct storage example 2017-07-07 16:18:37 +01:00
Randy Mackay 51fa8fb0bd AP_InertialSensor: resolve member init order compiler warning 2017-07-07 17:27:23 +09:00
Eugene Shamaev 43e9c8370f AP_BoardConfig: increase start delay to 5 seconds 2017-07-03 11:44:32 +01:00
Eugene Shamaev c6df13c795 AP_UAVCAN: changes to servo bitmasks to support multiple instances, baro, compass, gps changes for several CAN interfaces 2017-07-03 11:44:32 +01:00
Eugene Shamaev a7921a273b AP_BoardConfig: move of CAN parameters into separate group and support of several interfaces 2017-07-03 11:44:32 +01:00
Eugene Shamaev 36655310b3 AP_HAL_PX4: support for several CAN interfaces and drivers, filtering support 2017-07-03 11:44:32 +01:00
Eugene Shamaev ec8aa2e23f SRV_Channel: move of CAN bitmasks into AP_UAVCAN 2017-07-03 11:44:32 +01:00
Eugene Shamaev 5341e51f45 AP_GPS: support for multiple instances on different interfaces 2017-07-03 11:44:32 +01:00
Eugene Shamaev aa1f6a7587 AP_Compass: united enumeration on startup, multiple CAN drivers, correct dev_id based on network and node ID 2017-07-03 11:44:32 +01:00
Eugene Shamaev 6e6efa7e1b AP_Baro: enumeration and multiple interfaces support 2017-07-03 11:44:32 +01:00
Eugene Shamaev 8f2306fd19 AP_HAL: support of several CAN managers (virtual drivers) 2017-07-03 11:44:32 +01:00
Andrew Tridgell ca8a2a1f34 AP_RSSI: support receiver based RSSI protocols 2017-07-03 11:22:21 +10:00
Andrew Tridgell a88693c487 HAL_PX4: support RSSI from receiver protocols 2017-07-03 11:22:21 +10:00
Andrew Tridgell 9868ffe13b HAL_Linux: support receiver based RSSI 2017-07-03 11:22:21 +10:00
Andrew Tridgell 94b5a9c6f0 AP_HAL: added RSSI interface for RCInput 2017-07-03 11:22:21 +10:00
Andrew Tridgell 64f722876f RC_Channel: use set_and_save_ifchanged 2017-07-03 11:17:42 +10:00
Andrew Tridgell 1d41dc034d SRV_Channel: deprecate aileron_with_input and elevator_with_input 2017-07-03 11:17:42 +10:00
Andrew Tridgell b50ab75f4c RC_Channel: added set_and_save_trim() 2017-07-03 11:17:42 +10:00
Andrew Tridgell cde4afd28e SRV_Channel: added set_trim_to_servo_out_for()
this will be used for new TRIM_AUTO functionality in plane
2017-07-03 11:17:42 +10:00
Andrew Tridgell 9cb672e85e SRV_Channel: added doc values for dspoilers
and fix missing Motor9 to Motor12 values
2017-07-03 11:17:42 +10:00
Andrew Tridgell 7627246ff8 SRV_Channels: added 4 channel dspoiler support 2017-07-03 11:17:42 +10:00
Andrew Tridgell 907534d55f SITL: added dspoiler support 2017-07-03 11:17:42 +10:00
Andrew Tridgell 6b3bb29398 SRV_Channel: rename flaperon1 and flaperon2 to flaperon_left and flaperon_right
this makes it more consistent with elevons and vtails
2017-07-03 11:17:42 +10:00
Randy Mackay edc9d4db5b AP_InertialSensor: increase accel filter to 20hz 2017-07-03 09:38:15 +09:00
Peter Barker 7b3db490be DataFlash: correct examples 2017-06-29 15:43:39 +01:00
Peter Barker 9c2a2a3d94 AP_Module: correct example 2017-06-29 15:43:39 +01:00
Peter Barker cbe9627bf5 AP_GPS: correct example 2017-06-29 15:43:38 +01:00
Peter Barker 12b4f2c4b6 AP_AHRS: correct example 2017-06-29 15:43:38 +01:00
Peter Barker 7258cfd20b AP_GPS: check dataflash to see if we should log backend gps messages 2017-06-29 15:43:38 +01:00
Peter Barker 6ae86a0b8c AP_InertialSensor: use DataFlash should_log to determine raw logging 2017-06-29 15:26:27 +01:00
Peter Barker 4dfdffde43 DataFlash: move should_log check of log bitmask into DataFlash 2017-06-29 15:26:27 +01:00
Francisco Ferreira f35f0d59dd
AP_GPS: fix SBP2 driver build warnings by using memcpy
Build gave the following warnings:

../../libraries/AP_GPS/AP_GPS_SBP2.cpp: In member function ‘void AP_GPS_SBP2::_sbp_process_message()’:
../../libraries/AP_GPS/AP_GPS_SBP2.cpp:181:78: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing]
             last_heartbeat = *((struct sbp_heartbeat_t*)parser_state.msg_buff);
                                                                              ^
../../libraries/AP_GPS/AP_GPS_SBP2.cpp:181:28: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing]
             last_heartbeat = *((struct sbp_heartbeat_t*)parser_state.msg_buff);
                            ^
../../libraries/AP_GPS/AP_GPS_SBP2.cpp:186:76: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing]
             last_gps_time = *((struct sbp_gps_time_t*)parser_state.msg_buff);
                                                                            ^
../../libraries/AP_GPS/AP_GPS_SBP2.cpp:186:27: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing]
             last_gps_time = *((struct sbp_gps_time_t*)parser_state.msg_buff);
                           ^
../../libraries/AP_GPS/AP_GPS_SBP2.cpp:190:74: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing]
             last_vel_ned = *((struct sbp_vel_ned_t*)parser_state.msg_buff);
                                                                          ^
../../libraries/AP_GPS/AP_GPS_SBP2.cpp:190:26: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing]
             last_vel_ned = *((struct sbp_vel_ned_t*)parser_state.msg_buff);
                          ^
../../libraries/AP_GPS/AP_GPS_SBP2.cpp:194:74: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing]
             last_pos_llh = *((struct sbp_pos_llh_t*)parser_state.msg_buff);
                                                                          ^
../../libraries/AP_GPS/AP_GPS_SBP2.cpp:194:26: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing]
             last_pos_llh = *((struct sbp_pos_llh_t*)parser_state.msg_buff);
                          ^
../../libraries/AP_GPS/AP_GPS_SBP2.cpp:198:68: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing]
             last_dops = *((struct sbp_dops_t*)parser_state.msg_buff);
                                                                    ^
../../libraries/AP_GPS/AP_GPS_SBP2.cpp:198:23: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing]
             last_dops = *((struct sbp_dops_t*)parser_state.msg_buff);
                       ^
../../libraries/AP_GPS/AP_GPS_SBP2.cpp:202:74: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing]
             last_event = *((struct sbp_ext_event_t*)parser_state.msg_buff);
                                                                          ^
../../libraries/AP_GPS/AP_GPS_SBP2.cpp:202:24: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing]
             last_event = *((struct sbp_ext_event_t*)parser_state.msg_buff);
                        ^
2017-06-29 15:18:09 +01:00
ebethon 005dbf41a7 AP_GPS: Add SBP EXT_EVENT Message to dataflash log 2017-06-29 15:18:05 +01:00
ebethon 526d5a4c44 DataFlash: Add SBP EXT_EVENT Message 2017-06-29 15:18:05 +01:00
ebethon 4779a8f1f1 AP_GPS: Rename SBR1/SBR2 to SBRH/SBRM and change format
Add (sender_id, msg_len) in SBRM message
Add index/pages in SBRH/SBRM messages
Change format to integers to avoid GCS string parsing
Decrease data size in SBRH
2017-06-29 15:14:54 +01:00
ebethon 0b5dad33f2 DataFlash: Rename SBR1/SBR2 to SBRH/SBRM and change format
Add (sender_id, msg_len) in SBRM message
Add index/pages in SBRH/SBRM messages
Change format to integers to avoid GCS string parsing
Decrease data size in SBRH
2017-06-29 15:14:54 +01:00
Miguel Arroyo 7cea21afa2 AP_Math: Moves rand_vec3f from SITL_State. 2017-06-29 09:22:08 +10:00
Miguel Arroyo 86b9942d51 AP_HAL_SITL: move SITL Compass to standard sensor backend model 2017-06-29 09:22:08 +10:00
Miguel Arroyo ee328c9683 AP_Compass: move SITL Compass to standard sensor backend model 2017-06-29 09:22:08 +10:00
Georgii Staroselskii 0203b4c1b1 AP_Notify: RCOutputRGBLed: remove cork()
cork()/push() will be called in the vehicle code.

The issue that led to this fix was as follows:
- on a Linux board (Navio 2) usage of this class didn't yield any PWM on
  the expected outputs on Rover (Copter and Plane worked as expected)

After dicsussion at #6339 rover code was changed (541538f) to use make
proper use of SRV_Channels API.

This fix is also the consequence of the discussion. TL;DR: the output is
only done when commanded by the vehicle.
2017-06-27 11:46:41 -07:00
Peter Barker ad17709390 DataFlash: handle knowledge of in_log_download in DataFlash 2017-06-27 03:10:43 +01:00
Peter Barker 4c1aff03a3 GCS_MAVLink: move send-logs-via-mavlink code into DataFlash 2017-06-27 03:10:43 +01:00
Peter Barker 305531952f DataFlash: move send-logs-via-mavlink code into DataFlash 2017-06-27 03:10:43 +01:00
Peter Barker cbbee995b6 GCS_MAVLink: move GCS_Logs into DataFlash directory 2017-06-27 03:10:43 +01:00
Rob Ratcliff 60c6f8ad60 AP_GPS: fix bug when injecting messages bigger than 255 bytes
Commit 5261654 changed the used injection method so change this method signature to use uint16 for message length like previous injection method did
2017-06-27 03:06:26 +01:00
priseborough 9d0fa09d39 AP_NavEKF3: Fix calculation of predicted LOS rate in terrain estimator 2017-06-26 14:58:06 +01:00
priseborough c69c5440a0 AP_NavEKF2: Fix calculation of predicted LOS rate in terrain estimator 2017-06-26 14:58:06 +01:00
Francisco Ferreira a83457ab07
AP_BattMonitor: complement commit d3314d7684 by adding to second battery monitor too 2017-06-26 13:41:12 +01:00
Miguel Arroyo 4394c5145b AP_HAL_SITL: Fixes bug with uartF.
uartF _timer_tick() was not being called in the scheduler.
2017-06-26 13:05:16 +01:00
fsherratt d3314d7684 AP_BattMonitor: param desc explicitly list Pixhawk 2 PM1 pins
There is confusion over which pins to use with the pixhawk 2, updated documentation to explicitly state the PM1 pins as being the same as the original pixhawk
2017-06-24 11:01:03 +09:00
priseborough a4d18696a7 AP_NavEKF3: Improve variable names and documentation
Also remove unnecessary calculation of innov * gain
2017-06-23 00:43:58 +01:00
priseborough 368983ed5a AP_NavEKF3: Clean up aiding mode logic using switch statements 2017-06-23 00:43:58 +01:00
priseborough 2a9eceaf10 AP_NavEKF3: Fix bugs causing height drift when using range beacons 2017-06-23 00:43:58 +01:00