Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
55,175 Commits 71 Branches 509 Tags 758 MiB
Commit Graph

1646 Commits

Author SHA1 Message Date
Peter Barker 717edae9ef hwdef: fix redefinition of Solo values in CubeSolo/CubeGreen-Solo 
adding fmuv3 into the list of firmwares we might run on Solo was a late
addition to the recent PRs.  It was forgotten that the inheritance would
cause a redefition failure
 2022-04-06 16:38:23 +10:00
Andrew Tridgell 37d8feb928 hwdef: disable GPS drivers on low flash boards 
only leave uBlox enabled on boards that are running out of flash
 2022-04-06 14:14:07 +10:00
Andrew Tridgell c9bbfd94c0 hwdef: set AUTOBUILD_TARGETS None on eval boards 2022-04-06 14:13:44 +10:00
李孟晓 2d37bc9c78 AP_HAL_ChibiOS: CUAV-Nora: add usart3 support 2022-04-06 11:04:08 +10:00
Peter Barker d2c3c578c2 hwdef: add hwdef for CubeOrange-SimOnHardware 2022-04-05 18:10:14 +10:00
Andrew Tridgell 392e80001f HAL_ChibiOS: fixed H7 flash storage 
this fixes the flash re-init problem when flash storage fills on
H7. It was caused by rejecting writes where one or more of the 32 byte
chunks was not all 0xff but was equal to the current data. That
happens when writing to the sector header in AP_FlashStorage

it also moves the interrupt disable inside the loop to allow for
other interrupts to run between blocks
 2022-04-05 17:46:52 +10:00
Andrew Tridgell a0c867bce7 HAL_ChibiOS: disable interrupts during flash operations 
we have now shown that interrupts being enabled during flash
operations can cause the infamous "68ms" bug, or watchdog when using a
32 bit timer on boards using flash for storage

The issue is quite repeatable with a load of a very large waypoint
file (over 500 waypoints) using "wp ftpload" in MAVProxy. This puts a
huge load on flash storage.

Our current working theory is that while doing flash writes for
storage on dual-bank we block access to only one bank, so if another
thread uses a timeout function with a short timeout while the flash
write is happening and chVTDoTickI calls code which crosses the flash
bank boundary then it can cause chVTDoTickI to violate the assumption
that no more than CH_CFG_ST_DELTA ticks pass while it is calculating
the value to set in the system timer. In that case we get a delay of a
full timer wrap, which is 68ms on boards with 16 bit timer and 70
minutes on boards with 32 bit timer
 2022-04-05 17:46:52 +10:00
Andrew Tridgell f6f6521b28 Revert "hwdef: changed MatekH743 to a 32 bit timer" 
This reverts commit 7dc5911572.
 2022-04-05 17:46:52 +10:00
Lokesh Ramina 11b3eccf66 AP_Periph: Hwdef CarbonixL496 update 
Modification of CarbonixL496 to add more features.
Features:
To use internal clock of MCU, Oscillator value is set to 0.
LED pin changed from PA13 to PA15
Enabled  JTAG
Add interface to GPS and ADSB.
 2022-04-05 09:57:02 +10:00
Mirko Denecke c1e0e9c305 AP_HAL_ChibiOS: fix ms5611 probe for NucleoH743 2022-03-31 16:31:13 +11:00
Henry Wurzburg 479b02e5b0 HWDEF: add SLCAN OTG port, correct defaults.param errors 2022-03-29 10:43:51 +11:00
Andy Piper eb996f28cc AP_HAL_ChibiOS: spro H7 extreme updates. 
cannot currently use both IMUs on spro H7 extreme due to CPU load
 2022-03-29 10:39:35 +11:00
Peter Barker 29c2c40c41 hwdef: enable both OreoLED and Solo gimbal on fmuv3 
for users running fmuv3 on their Solo
 2022-03-29 08:24:59 +09:00
Peter Barker a30f33a674 hwdef: enable both OreoLED and Solo gimbal on CubeOrange 
for users who have replaced their CubeSolo with a CubeOrange
 2022-03-29 08:24:59 +09:00
Peter Barker f186f612f9 AP_HAL_ChibiOS: enable Solo Gimbal only on CubeGreen 2022-03-29 08:24:59 +09:00
Andrew Tridgell 7dc5911572 hwdef: changed MatekH743 to a 32 bit timer 
the 68ms issue is still present on this board. Switching to a 32 bit
timer will fix it, but loses us the tonealarm support
 2022-03-29 07:45:23 +11:00
MallikarjunSE bf0ce19942 hwdef: RM3100 no false rotation 2022-03-24 07:47:11 +11:00
MallikarjunSE 549883772c hwdef: RM3100 reversal mask 2022-03-24 07:47:11 +11:00
bugobliterator 2dceb9a3ed AP_HAL_ChibiOS: ensure that common ram is selected for bootloader/app comms in STM32H7 2022-03-23 19:09:21 +11:00
bugobliterator 7abcf9ec46 AP_HAL_ChibiOS: add CubeOrangePlus 2022-03-20 07:23:10 -07:00
Andrew Tridgell 54e4c6e1be hwdef: leave MatekL431 ROMFS uncompressed 
this allows for bl update when low on memory
 2022-03-19 12:06:04 +11:00
mateksys 35ed87a5db AP_HAL_ChibiOS: add MatekL431 AP_Periph hwdef 2022-03-19 12:06:04 +11:00
Andy Piper ceef68e07b AP_HAL_ChibiOS: allow H7 480Mhz clock speed to be configured in hwdef via MCU_CLOCKRATE_MHZ 2022-03-16 20:37:30 +11:00
Andy Piper 222717cc88 AP_HAL_ChibiOS: add KakuteH7-bdshot target 2022-03-15 10:18:58 +11:00
Peter Barker 470cb2caa2 AP_HAL_ChibiOS: turn autocal off for periphs 2022-03-15 08:52:37 +11:00
李孟晓 81b129d3b3 AP_HAL_ChibiOS: CUAVv5: use icm42688p instead of icm20602 2022-03-15 05:59:14 +11:00
AndKe caaa5002ab AP_HAL_ChibiOS: add OREOLED to CubeGreen 2022-03-14 09:19:37 +11:00
iainguilliard ea0b6dfcb2 HAL_ChibiOS: add MatekF405-STD S7 PWM output 
MatekF405-STD board has a pad for S7 PWM output from pin PB8 missing in hwdef
 2022-03-13 14:00:26 +11:00
Peter Barker e486671bb2 AP_HAL_ChibiOS: correct #ifndef nesting in periph defaults 2022-03-13 13:23:51 +11:00
bugobliterator faf0c0d7c3 AP_HAL_ChibiOS: set canfd bitrates using CANFD_SUPPORTED opt 2022-03-11 18:13:54 +11:00
bugobliterator 90a660b445 AP_HAL_ChibiOS: update clock tree to have FDCAN Base clock at 80MHz 2022-03-11 18:13:54 +11:00
Siddharth Purohit 72090d10da AP_HAL_ChibiOS: add hwdef config to enable CANFD support 2022-03-11 18:13:54 +11:00
MallikarjunSE 228796d55b AP_HAL_ChibiOS: Add Sierra-F9P support 2022-03-10 08:29:51 +11:00
murata eb78a0a4a6 hwdef: Set the maximum number of barometric pressure sensors to 1 2022-03-08 14:21:31 -08:00
murata 60eb6ff1b7 hwdef: Maximum number of battery monitors is 1 2022-03-08 14:21:31 -08:00
Andrew Tridgell 74f1a8007d hwdef: enable GPS_MOVING_BASELINE on FreeflyRTK and f303-GPS 
this allows for F9P based dual-GPS yaw on DroneCAN peripherals with
auto-config
 2022-03-09 07:52:42 +11:00
Andrew Tridgell 86c25b98d5 hwdef: added HolybroG4_GPS 2022-03-09 07:51:35 +11:00
MallikarjunSE 5cd1c7783d hwdef: hwdef update with watchdog 2022-03-07 16:15:41 +11:00
MallikarjunSE 360ddb2aed hwdef:update storage pages and enable watchdog 2022-03-07 16:15:41 +11:00
Andrew Tridgell 7999335727 hwdef: fixed buzzer on CUAV_GPS peripheral 2022-03-03 16:26:27 +11:00
Peter Barker 11f7cce978 AP_HAL_ChibiOS: allow specification of AUTOBUILD_TARGETS in hwdef files 2022-03-03 09:03:17 +11:00
Andy Piper d589c0fc5e AP_HAL_ChibiOS: normalize BeastH7v2 in line with BeastF7v2 definition 2022-03-02 15:46:17 +11:00
Evgeniy 32afbbdec4 AP_HAL_ChibiOS: BeastH7v2 board added 2022-03-02 15:46:17 +11:00
Andy Piper ed952a0ea0 AP_HAL_ChibiOS: allow flash to be write-protected/unprotected on reboot 
control protection support via HAL_FLASH_PROTECTION
provide support for flash protection on SPRacingH7
SPRacingH7 bootloader needs to use w25q-dtr
 2022-02-24 10:19:07 +11:00
Henry Wurzburg ac88f354fc hwdef: update Swan-K1 with new harmonic notch mask to avoid errors 2022-02-23 18:45:51 +11:00
Andy Piper b6022ca5d4 AP_HAL_ChibiOS: add support for alternate alarm PWM group 
account for inverted alarms and build on boards without PWM
enable alarm based on pwm
shutdown alarm channel if using a different one
 2022-02-23 18:35:43 +11:00
Andy Piper f840315aa4 AP_HAL_ChibiOS: clock H750 at 480Mhz when using 8Mhz, 16Mhz and 24Mhz crystals 2022-02-23 18:19:56 +11:00
Andrew Tridgell 96518c9eda HAL_ChibiOS: added CPU defines to hwdef 
needed for checks like defined(STM32F1)
 2022-02-22 12:13:19 +11:00
Andrew Tridgell 6039b8012a HAL_ChibiOS: define HAL_USE_SDMMC 2022-02-22 12:13:19 +11:00
Andrew Tridgell 638e20a0b9 HAL_ChibiOS: bring in hal.h where it is needed 2022-02-22 12:13:19 +11:00
Andrew Tridgell 25cc8203d8 HAL_ChibiOS: added CHIBIOS_BOARD_NAME define 2022-02-22 12:13:19 +11:00
Andrew Tridgell 7e18d85f7e hwdef: added compat board ID for FreeFly RTK GPS 2022-02-17 14:37:41 +11:00
Andrew Tridgell f2308e96a9 HAL_ChibiOS: added stm32_was_software_reset() 2022-02-17 14:37:41 +11:00
Andrew Tridgell a641eb3a30 HAL_ChibiOS: support ALT_BOARD_ID 
allow for compat with px4 board ID for the same board
 2022-02-17 14:37:41 +11:00
Andy Piper 83ac78e969 AP_HAL_ChibiOS: add support for @SYS/timers.txt 
move out prescaler calculation and use closest prescaler everywhere
include timer id in PWM groups
 2022-02-16 15:28:04 +11:00
Nathan Costa 9f7aa715b1 AP_HAL_ChibiOS: add support for CAN/I2C switch 2022-02-16 13:25:58 +11:00
Andy Piper 7b15245efe AP_HAL_ChibiOS: update SPRacingH7 Extreme hwdef and add README 
add SPRacingH7 board layout
 2022-02-15 11:32:52 +11:00
Andy Piper 48c21299f8 AP_HAL_ChibiOS: hwdef for SPRacingH7 
hwdef for DevEBoxH7v2
pin definitions for STM32H750
add QSPI to DevEBox bootloader
add external flash to DevEBox
rename EXTERNAL_PROG_FLASH_MB to EXT_FLASH_SIZE_MB
Add support for EXT_FLASH_RESERVE_START_KB and EXT_FLASH_RESERVE_END_KB
Disable HAL_ENABLE_SAVE_PERSISTENT_PARAMS when there is no bootloader flash available
relax storage health status with SD card backend
don't check SD card health unless USE_POSIX
binary sections rearranged on external ram
manage RAMFUNC through ldscript and optimize function placement in external flash
inline timer functions
optimize placement of ChibiOS and functions in ITCM and AXI RAM
fix chibios features on bootloader build with external flash
change H750 memory layout
increase line storage for SD card based parameters
comment external flash linker script
move vtables into DTCM
update ram map for H757
enable crashdump support with external flash
correct bootloader pins and generator on SPRacingH7/DevEBoxH7v2
setup external flash reserve regions
allow different RAM_MAP for external flash on H750 and H757
 2022-02-09 12:47:55 +00:00
MallikarjunSE a4b5bf1f4f hwdef: Update hwdef to have only mag and airspeed 2022-02-09 18:27:56 +11:00
Andrew Tridgell ef7e611aff HAL_ChibiOS: added cubemx file for F745-8MHz 2022-02-09 09:35:26 +11:00
Walter Dunckel f2347e7845 AP_HAL_ChibiOS: add missing EOL in output 
without it a double define line was giving compiler an error
 2022-02-09 09:14:25 +11:00
Peter Barker 6e684b3496 hwdef: disable blheli on skyviper 2022-02-08 20:39:44 +11:00
Peter Barker 09c040891e hwdef: cap number of Compass, Baro and INS instances 
saves flash as we don't have to have the parameter structures
 2022-02-08 20:39:44 +11:00
Peter Barker 7f584ad2c8 hwdef: SkyViper gets COMPASS_MAX_SENSORS 1 2022-02-08 20:39:44 +11:00
Andy Piper 0e18bd450d AP_HAL_ChibiOS: fix bi-directional dshot on omnibusf4pro 2022-02-08 12:12:28 +11:00
Peter Barker b88bfa962b AP_HAL_ChibiOS: add and use AP_MOTORS_FRAME_DEFAULT_ENABLED 2022-02-08 11:06:24 +11:00
Joshua Henderson 3df82b26de hwdef: MatekF045-CAN remove unused define, set BATT_Default 0 2022-02-08 10:41:02 +11:00
Joshua Henderson ecacd513c2 hwdef: f405-MatekGPS add debug pin info, set default arspd, batt 0 
and remove ADSB from build
 2022-02-08 10:41:02 +11:00
Joshua Henderson 8505017d26 hwdef: Add f405-MatekAirspeed 2022-02-08 10:41:02 +11:00
Sam Chamberlin d73a45aa64 hwdef: add ARK_GPS 2022-02-03 18:36:02 +11:00
Joshua Henderson 204c26c53b hwdef: f103-RangeFinder, use AP_PERIPH_RANGEFINDER_PORT_DEFAULT 2022-02-02 18:45:59 +11:00
Joshua Henderson ed208687b4 hwdef: Pixracer-periph, use AP_PERIPH_RANGEFINDER_PORT_DEFAULT 2022-02-02 18:45:59 +11:00
Andrew Tridgell c2c94631e8 HAL_ChibiOS: added STM32CubeMX files for new F412 configs 2022-02-02 07:42:23 +11:00
Andrew Tridgell e07057d24f HAL_ChibiOS: support SDIO 48MHz clock on F412 2022-02-02 07:42:23 +11:00
TulleU 7907fd5729 AP_HAL_ChibiOS: revo-mini-i2c probe for external compasses 
allow for probing of external compasses on i2c
 2022-02-01 17:36:14 +11:00
Hwurzburg 0ea7044796 AP_HAL_ChibiOS: update option names in BATTMonitor in prep for expansion 2022-02-01 12:35:03 +11:00
Peter Barker 0eacc0348e AP_HAL_ChibiOS: remove HAL_COMPASS_DEFAULT define 
this doesn't actually allow you to specify a default, despite the name
and a couple of hwdefs trying to use it that way.

This would have stopped being useful when we did the
compass-prority-table stuff - or before.
 2022-02-01 12:10:38 +11:00
Peter Barker a4d2194f80 hwdef: SkyViper-v2450: enable only UBLOX and MAV GPS backends 2022-02-01 11:22:02 +11:00
mathieulohier bcc60d0945 hwdef: modalai_fc_v1 update documentation 2022-02-01 11:02:23 +11:00
Andrew Tridgell 563528dfc0 HAL_ChibiOS: update CubeMX files 2022-01-29 18:57:33 +11:00
Andrew Tridgell 00e32b52bf hwdef: removed unnecessary PLL overrides 
now we've properly filled in the F4 clocks we can use normal PLL
settings
 2022-01-29 18:57:33 +11:00
Andrew Tridgell 040ff007ea HAL_ChibiOS: fixed some F4 clocks, and support no crystal on F4 
this fixes up some of the F4 varients that were running at the wrong
clock, and also gives support for running F4s with no crystal
 2022-01-29 18:57:33 +11:00
Andrew Tridgell a8b98bfcc4 HAL_ChibiOS: required EXPECTED_CLOCK in all MCU files 
this ensures we validate the clock setup at compile time
 2022-01-29 18:57:33 +11:00
Andrew Tridgell 1224ff48b3 hwdef: fixed VCC monitoring on AIRLink 2022-01-29 15:09:46 +11:00
Peter Barker da79a5ea78 hwdef: skyviper-v2450: exclude many build features 2022-01-27 20:58:24 +11:00
Kirill Shilov 477fb4c408 hwdef: AIRLink added default parameters files 2022-01-27 17:42:11 +11:00
Andrew Tridgell 585ee5b2e4 hwdef: fixed rainbow effect on startup in CUAV_GPS 2022-01-27 08:26:47 +11:00
Peter Barker 51a9efe817 AP_HAL_ChibiOS: rename AP_AHRS::get_position to get_location 2022-01-25 10:47:22 +11:00
Hwurzburg c5a444e4a3 hwdef: correct Pixhawk5 3.3V analog in scale factor 2022-01-25 09:37:34 +11:00
ot0tot 13050b325b Tools: add JHEMCU GSF405A bootloader and ID 2022-01-19 18:31:05 +11:00
ot0tot 1a08a1e1a1 hwdef: add support for JHEMCU GSF405A 2022-01-19 18:31:05 +11:00
Peter Barker 185ccaee92 AP_HAL_ChibiOS: disable UART stats based on GCS being enabled 
We may need to revisit this if we are able to transfer these files over
some other mechanism into the future
 2022-01-18 11:09:03 +11:00
Hwurzburg 176de8aa86 AP_HAL_ChibOS: update hwdef,defaults.readme for KakuteH7 2022-01-18 11:05:38 +11:00
Andrew Tridgell d22e3a1f52 hwdef: fixed flash double reserve 
fixes #19765, an alternative to #19768

the advantage of this approach is it is less error prone, as the
actual position and size of the storage sectors is calculated
 2022-01-13 06:44:46 +11:00
Peter Barker 4c72d0f562 AP_HAL_ChibiOS: disable UART statistics on Hitec-Airspeed 2022-01-12 18:30:49 +11:00
Andy Piper 368a0c74a1 AP_HAL_ChibiOS: fix UART operation on original OmnibusNanoV6 2022-01-12 18:17:08 +11:00
Peter Barker 2af5c51ac7 AP_HAL_ChibiOS: save flash on the BeastF7v2 
Note that many of these entries are already excluded by BeastF7 which
this hwdef inherits from
 2022-01-11 13:25:13 +11:00
Andrew Tridgell 1ecb129afa hwdef: fixed 3 incorrect storage sizes 
can't do 16384 in 16k sector flash storage
 2022-01-11 11:33:30 +11:00
Andrew Tridgell d4eb2919ef hwdef: fixed HAL_STORAGE_SIZE for MatekF405-TE 2022-01-11 11:33:30 +11:00
Andrew Tridgell 59b2a30c11 HAL_ChibiOS: added check for valid HAL_STORAGE_SIZE 2022-01-11 11:33:30 +11:00
Andrew Tridgell de273fb76d hwdef: fixed f405-MatekGPS storage location and CAN 
this allows for CAN firmware update using f405-MatekGPS bootloader by
fixing a typo, then moves storage to allow the bootloader with can to
fit on the board

this will allow CAN update of peripheral firmware for Matek GPS and
airspeed sensors
 2022-01-11 11:33:30 +11:00
Andrew Tridgell 1236474cfb HAL_ChibiOS: give an error if STORAGE_FLASH_PAGE overflash flash 
when storage is between the bootloader and main program flash then the
flash size available to the bootloader needs to stop at the sector for
the storage flash.

Similarly, if storage is at the end of flash, then total flash size
needs to be limit

this ensures we don't try to build a firmware that encroaches on
program space
 2022-01-11 11:33:30 +11:00
Andy Piper a533fadf1b AP_HAL_ChibiOS: support KakuteH7Mini 2022-01-11 10:58:55 +11:00
Peter Barker 03e9307bdd AP_HAL_ChibiOS: add MANUFACTURER and BRAND_NAME to PixRacer Pro 2022-01-07 22:46:52 +11:00
Peter Barker 81d205465c hwdef: remove OpticalFlow from builds in several low-flash boards 2022-01-06 13:35:51 +11:00
李孟晓 94b14ae60b hwdef: CUAV-Nora: Add servo voltage detection pin 2022-01-06 12:39:45 +11:00
phil tokumaru bfded82da5 AP_HAL_ChibiOS: STM32F777xx.py: correct pincount for J and K 2022-01-06 09:15:14 +11:00
Andy Piper c357c1e521 AP_HAL_ChibiOS: hwdef for BeastF7 v2 
Fix undef of alt pins
 2022-01-05 18:50:41 +11:00
MallikarjunSE adff48c3ea hwdef: remove Notify LEDs from Sierra-F405 
NTF_LED_BRIGHT 2, NTF_LED_LEN 8 used to cause board to get stuck in bootloader on reboot.
 2022-01-05 09:22:45 +11:00
Peter Barker f44335371f hwdef: set AP_OPTICALFLOW_ENABLED 0 for SkyViper-v2450 2022-01-04 11:01:40 +11:00
Andy Piper f9e14ffa30 AP_HAL_ChibiOS: add support BeastF7v2 2021-12-31 09:25:29 +11:00
MallikarjunSE 3ff9b76b08 AP_HAL_ChibiOS: Sierra-F405 support 2021-12-29 10:13:54 +11:00
MallikarjunSE eb8cfea507 AP_HAL_ChibiOS: Sierra-F412 support 2021-12-29 10:12:40 +11:00
Andrew Tridgell 61ecf0c443 HAL_ChibiOS: cleanup SDMMC enable defines 
ensure both are set
 2021-12-28 16:04:57 +11:00
Andrew Tridgell 146f394d64 HAL_ChibiOS: include fatfs format code 2021-12-28 16:04:57 +11:00
Andrew Tridgell 281f041abb hwdef: fixed debug pins on two boards bootloaders 2021-12-28 10:31:25 +11:00
Andrew Tridgell 6a2303f72d hwdef: enable telem3 (SERIAL5) TX on Pix32v5 
this is now safe as we disable the TX/RX pins on ports with
SERIALn_PROTOCOL = -1

as this board defaults to protocol -1 for SERIAL5, we can enable this
if the user wishes to use telem3
 2021-12-28 10:13:58 +11:00
Nikolay March cceae1acf3 hwdef: Redefine DMA priority PH4-mini 
BUG.
Without redefining priority there is no DMA on any RX of serial ports.
Now it is.
Without DMA, you cannot normally use the serial port for the CRSF protocol.
 2021-12-27 11:25:51 +11:00
mateksys be601acd89 AP_HAL_ChibiOS: add MatekF405-TE hwdef 2021-12-22 18:47:37 +11:00
Brad Stinson cd39110b68 hwdef: add support for PixC4-Jetson 
add support for building IOMCU with F103 and 8MHz clock
 2021-12-21 13:05:34 +11:00
bugobliterator 62945e1d85 AP_HAL_ChibiOS: use common directory reference wrt hwdef scripts 2021-12-20 12:47:25 +11:00
Peter Barker bdeec0868e AP_HAL_ChibiOS: turn wind-compensation off in hwdef defaults 2021-12-19 10:45:16 +11:00
bugobliterator f0073e472b HAL_ChibiOS: set SWD pins pulled up and low by default 2021-12-17 22:51:18 -08:00
Shiv Tyagi b2073e4e1c AP_HAL_ChibiOS: remove stray define HAL_PERIPH_ENABLE_BATTERY_MPPT_PACKETDIGITAL 
We have removed the class AP_BattMonitor_MPPT_PacketDigital, hence this should be removed too
 2021-12-17 20:24:25 +09:00
Peter Barker 7cbe48d1f6 hwdef: fix CubeOrange-periph-heavy build 2021-12-14 14:11:35 +11:00
Andrew Tridgell ee7464140a HAL_ChibiOS: avoid re-writing hwdef.h if unchanged 
this makes dependency handling faster
 2021-12-14 09:37:17 +11:00
Andrew Tridgell 0e5beb423e HAL_ChibiOS: sort shared dma mask 
this prevents an unnecessary change in hwdef.h on reconfigure
 2021-12-14 09:37:17 +11:00
Andrew Tridgell c9b35ccfc8 hwdef: enable ESC telem on CarbonixL496 2021-12-10 08:11:24 -08:00
Andrew Tridgell 67649fe17d hwdef: added CarbonixL496 AP_Periph node 2021-12-07 10:23:54 +11:00
Andrew Tridgell fbadc24fca HAL_ChibiOS: support 12MHz crystal on L4xx MCUs 2021-12-07 10:23:54 +11:00
Andrew Tridgell 2c2369bf03 AP_HAL_ChibiOS: revert compass parameter changes 2021-12-04 16:51:53 +11:00
Randy Mackay ec6ea03b80 AP_HAL_ChibiOS: update CubeBlack-pinout image 
CAN1 and CAN2 port labels have been swapped
 2021-12-03 13:49:20 +09:00
Andrew Tridgell 05ec2be62b hwdef: updated KakuteH7 battery scale defaults 
thanks to Vincent at Holybro
 2021-12-02 18:17:49 +11:00
bugobliterator f9bb9b4fc0 AP_HAL_ChibiOS: log heap and bss memory regions if enough space 2021-12-01 18:17:50 +11:00
bugobliterator 878940292d HAL_ChibiOS: no need to mention END reserve for Crash Dump anymore 2021-12-01 18:17:50 +11:00
bugobliterator ee35350129 HAL_ChibiOS: setup for recording crashdump at the remaining flash space 2021-12-01 18:17:50 +11:00
bugobliterator 52c7886270 HAL_ChibiOS: fix issue with failing to write final buffer 2021-12-01 18:17:50 +11:00
bugobliterator eae3fb016f HAL_ChibiOS: dump per thread stack for crash 2021-12-01 18:17:50 +11:00
Andrew Tridgell 312a6461b6 HAL_ChibiOS: enable UART7 on Swan-K1 
useful extra UART for debug
 2021-12-01 18:08:54 +11:00
Josh Henderson 34b3b7999e CubeYellow: define HAL_CHIBIOS_ARCH_CUBE 2021-11-30 10:20:54 +11:00
Josh Henderson 188c3a781e CubeSolo: define HAL_CHIBIOS_ARCH_CUBE 2021-11-30 10:20:54 +11:00
Josh Henderson e78edac2a0 CubePurple: define HAL_CHIBIOS_ARCH_CUBE 2021-11-30 10:20:54 +11:00
Josh Henderson b37c214f28 CubeOrange: define HAL_CHIBIOS_ARCH_CUBE 2021-11-30 10:20:54 +11:00
Josh Henderson db3be4d07c CubeBlack: define HAL_CHIBIOS_ARCH_CUBE 2021-11-30 10:20:54 +11:00
Josh Henderson c7b986f30a CubeYellow: set default EKF_IMU_MASK 2021-11-30 10:20:54 +11:00
Josh Henderson b8411c22c5 CubeOrange: set default EKF_IMU_MASK 2021-11-30 10:20:54 +11:00
Iampete1 0c519db602 hwdef: use new compass param names in defualts.parm 2021-11-30 08:14:43 +09:00
Peter Barker 7abf07f233 hwdef: remove unused HAL_NO_GCS defines 
This became HAL_GCS_ENABLED, off by default on Periph
 2021-11-26 12:25:40 +11:00
Peter Barker 139c460fa5 hwdef: remove unused define NO_DATAFLASH 2021-11-24 18:18:06 +11:00
Peter Barker ee68072c62 AP_HAL_ChibiOS: chibios_hwdef: use ifndef pattern for AP_FETTEC_ONEWIRE_ENABLED 2021-11-24 12:01:22 +11:00
Peter Barker 5d005df92f AP_HAL_ChibiOS: rename HAL_AP_FETTEC_ONEWIRE_ENABLED to AP_FETTEC_ONEWIRE_ENABLED 2021-11-24 12:01:22 +11:00
Peter Barker 9a2d9898ba AP_HAL_ChibiOS: eliminate HAL_LOGGING_DATAFLASH 
This define didn't add anything over HAL_LOGGING_DATAFLASH_ENABLED - and
predates it.
 2021-11-23 11:24:46 +11:00
Andrew Tridgell 0b567e95dc hwdef: added OTG2 for MatekF765-SE 2021-11-22 22:48:59 +11:00
Andrew Tridgell fc6a82de1b AP_HAL_ChibiOS: support up to 9 UARTs 2021-11-22 22:48:59 +11:00
李孟晓 dfe2ade495 CUAV-X7: Add servo voltage detection pin 2021-11-22 16:39:15 +11:00
Andrew Tridgell fbeaa3be6b hwdef: change MatekH743 to -Os 
leave space for more features
 2021-11-17 19:39:26 +11:00
TunaLobster 11f98f7421 AP_HAL_ChibiOS: fix ADC scaling on IOMCU 2021-11-16 14:12:43 +11:00
Andrew Tridgell c3442d0143 hwdef: added alternative Durandal 20602 IMU 2021-11-11 08:28:51 +11:00
Jaime 5d117c6ae7 hwdef: CubeOrange Enable Serial2 and Serial3 in bootloader hwdef 2021-11-10 18:10:20 +11:00
Kirill Shilov f97182f48a hwdef: AIRLink board support 2021-11-10 08:47:21 +11:00
Andrew Tridgell f7bc7b0d9b HAL_ChibiOS: support more enable pins for late enable 2021-11-10 08:47:21 +11:00
Randy Mackay 9c1ca781f6 AP_HAL_ChibiOS: update for renamed BRD_HEAT_ parameters 2021-11-09 08:02:57 +09:00
Andrew Tridgell 97aee6f45e HAL_ChibiOS: fixed regex error for GPIOs 2021-11-07 07:00:35 +11:00
Andrew Tridgell 8a4001817b HAL_ChibiOS: added support for Pixhawk5X 2021-11-05 14:30:43 +11:00
Andrew Tridgell 5f15432e07 HAL_ChibiOS: allow for NODMA patterns 
this makes it easy to disable DMA on I2C
 2021-11-05 14:30:43 +11:00
Andrew Tridgell c77dfae9a4 HAL_ChibiOS: adjust modalai for INA2xx batt mon change 2021-11-05 14:30:43 +11:00
Andrew Tridgell 98849a3998 HAL_ChibiOS: fixed build for EMPTY uarts 
this fixes NucleoH743 build
 2021-11-01 15:48:25 +11:00
QioTek 952a827287 HAL_ChibiOS: fixed orientation of ADI1674X and optimize SPI3 DMA 
HAL_ChibiOS: fixed orientation of ADI1674X and optimize SPI3 DMA
 2021-10-31 08:42:05 +11:00
bugobliterator 57e1fb1a81 HAL_ChibiOS: disable building CrashCatcher for non 2M boards 2021-10-30 19:24:57 +11:00
bugobliterator 91fdf6e875 HAL_ChibiOS: fix issue with writing the last byte 2021-10-30 19:24:57 +11:00
bugobliterator 8651d99de6 HAL_ChibiOS: move to using parameter STORAGE_FLASH_PAGE instead of define 2021-10-30 19:24:57 +11:00
bugobliterator 70f606c480 AP_HAL_ChibiOS: restrict crash dump mechanisms only on boards with 2M flash 2021-10-30 19:24:57 +11:00
bugobliterator 909f59f0e0 HAL_ChibiOS: fix build with boards without HAL_CRASH_SERIAL_PORT 2021-10-30 19:24:57 +11:00
bugobliterator a6b2018cbf HAL_ChibiOS: fix build and serial crash dump for F4 based boards 2021-10-30 19:24:57 +11:00
bugobliterator 7d199f3e51 HAL_ChibiOS: record info into watchdog as well 2021-10-30 19:24:57 +11:00
bugobliterator 13c83f7010 HAL_ChibiOS: remove build of Crash dump to flash methods when !defined(HAL_CRASH_DUMP_FLASHPAGE) 2021-10-30 19:24:57 +11:00
bugobliterator 66b8b9cf74 HAL_ChibiOS: add support for dumping crash logs to flash page 2021-10-30 19:24:57 +11:00
bugobliterator b2ffc12092 HAL_ChibiOS: define flash page for dumping crash log 2021-10-30 19:24:57 +11:00
bugobliterator bd08d2d257 HAL_ChibiOS: move crashcatcher methods out from system.cpp into hwdef common 2021-10-30 19:24:57 +11:00
bugobliterator 69f53a6188 HAL_ChibiOS: add defines for CrashCatcher methods to use 2021-10-30 19:24:57 +11:00
bugobliterator c32bd845f2 HAL_ChibiOS: build crashcatcher lib alongside chibios 2021-10-30 19:24:57 +11:00
Andrew Tridgell a0b662f161 hwdef: fixed reported flash on boards with storage at end of flash 
this was in hwdef-bl.dat but had been left out of hwdef.dat which led
to flash_free being wrong in apj file
 2021-10-29 18:28:36 +11:00
Andrew Tridgell b94d6b064f HAL_ChibiOS: convert some hwdef.dat to unix line endings 2021-10-26 15:56:53 +11:00
Andrew Tridgell 80836ca1d9 HAL_ChibiOS: simplify AP_Periph hwdef.dat 2021-10-26 15:56:53 +11:00
Andrew Tridgell 68146d541c HAL_ChibiOS: removed boilerplate lines from bootloaders 2021-10-26 15:56:53 +11:00
Andrew Tridgell 0378e1a879 HAL_ChibiOS: removed need for a lot of boilerplate hwdef lines 
bootloader and AP_Periph lines can default to right values
 2021-10-26 15:56:53 +11:00
Hwurzburg e7a157283f AP_HAL_ChibiOS: add param for second IMU primary in Swan-K1 hwdef 2021-10-26 10:38:28 +11:00
Iampete1 d7cc2cb296 AP_HAL_ChibiOS: hwdef.py: allow same GPIO pin in multiple alt configs 2021-10-26 10:05:20 +11:00
kniuk aabb6f7c59 AP_HAL_ChibiOS: add alt config GPIO to Matek F765-Wing 
Based on new functionality introduced in #18753
 2021-10-26 10:05:20 +11:00
Andrew Tridgell 822e657a70 HAL_ChibiOS: increase PROCESS_STACK on several boards 
use min of 0xA00 for AP_Periph. A larger stack is needed for parameter
fetching
 2021-10-20 19:06:35 +11:00
Iampete1 8459439798 AP_HAL_ChibiOS: CubeYellow: set default IMU arming temp margin 2021-10-19 11:16:45 +11:00
Iampete1 8e381b6017 AP_HAL_ChibiOS: CubeSolo: set default IMU arming temp margin 2021-10-19 11:16:45 +11:00
Iampete1 a004de65b3 AP_HAL_ChibiOS: CubePurple: set default IMU arming temp margin 2021-10-19 11:16:45 +11:00
Iampete1 e3289d2aec AP_HAL_ChibiOS: CubeBlack: set default IMU arming temp margin 2021-10-19 11:16:45 +11:00
Iampete1 5d5a21a4ec AP_Hal_ChibiOS: CubeOrange: set default min IMU temp margin 2021-10-19 11:16:45 +11:00
QioTek fd2195d6fe HAL_ChibiOS: added QioTekZealotH743 support 2021-10-19 08:17:43 +11:00
Andrew Tridgell 7aa968329c HAL_ChibiOS: added Nucleo-L476 target 2021-10-17 20:30:20 +11:00
Andrew Tridgell c8664e0b98 HAL_ChibiOS: added STM32L476 support 2021-10-17 20:30:20 +11:00
Andrew Tridgell 655c757c22 HAL_ChibiOS: added Sierra-L431 peripheral 2021-10-17 20:30:20 +11:00
Andrew Tridgell 5a68e21435 HAL_ChibiOS: support STM32L431 2021-10-17 20:30:20 +11:00