Commit Graph

5574 Commits

Author SHA1 Message Date
bnsgeyer 6d0cfc13a2 Copter: heli: Update swashplate behavior
change swashplate behavior on ground in Acro, Stabilize, and AltHold
flight modes. See discussion here:

https://discuss.ardupilot.org/t/tradheli-swashplate-behavior-while-on-the-ground-and-potential-fix-to-issue-5396/22463/18
2017-10-28 12:31:06 +11:00
Peter Barker c7216a2740 Copter: call ins periodic function 2017-10-27 16:33:45 +11:00
Randy Mackay 842eed5426 Copter: accept do-winch commands with max rate 2017-10-27 09:20:38 +09:00
Randy Mackay 47bbf49aa6 Copter: fix tuning knob rate control of winch 2017-10-27 09:20:38 +09:00
Randy Mackay 787954fa37 Copter: integrate winch library
fixes after peer review:
rename winch-disable to winch-relaxed
add DO_WINCH to do-verify
winch release-length accepts rate
2017-10-27 09:20:38 +09:00
Randy Mackay 2c511b4269 Copter: add AP_Winch and AP_WheelEncoder to build 2017-10-27 09:20:38 +09:00
ChristopherOlson 51c8c1adb2 Copter: TradHeli update comment
be consistent with dynamic flight speed definition
2017-10-26 17:15:40 +11:00
ChristopherOlson 572c609cd6 Copter: Trad Heli-change default accel_z_p to 0.30
prevents collective cycling in altitude controlled modes
2017-10-26 17:15:40 +11:00
Andrew Tridgell 0d0f1d264b Copter: fixed order of motor setup 2017-10-22 15:52:50 +11:00
Andrew Tridgell c4b0d7bc35 Copter: removed calls to motors->enable() 2017-10-22 15:52:50 +11:00
Andrew Tridgell f49ab44f25 Copter: support simple accel calibration 2017-10-10 10:57:38 +11:00
Andrew Tridgell e2f710523e Copter: added inverted flight to switch docs 2017-10-03 10:16:41 +11:00
Andrew Tridgell 951ed95eb9 Copter: support inverted flight CH7 option 2017-10-03 10:16:41 +11:00
Andrew Tridgell 18f04abfe8 Copter: added HELI_QUAD 2017-10-03 10:16:41 +11:00
Michael du Breuil 516709fc72 Copter: Check GPS health 2017-09-27 19:29:32 +01:00
Lucas De Marchi beabae6a98 global: use static method to construct AP_AHRS_NavEKF 2017-09-26 03:01:21 +01:00
Lucas De Marchi c9fbf7b722 global: use static method to construct AP_NavEKF3 2017-09-26 03:01:21 +01:00
Lucas De Marchi e2fe36357a global: use static method to construct AP_NavEKF2 2017-09-26 03:01:21 +01:00
Lucas De Marchi 6781a44046 global: use static method to construct AP_Avoidance_* 2017-09-26 03:01:21 +01:00
Lucas De Marchi 8f304ed809 ArduCopter: add static create method for AP_Avoidance_* 2017-09-26 03:01:21 +01:00
Lucas De Marchi 6d009cdf6e global: use static method to construct AP_ADSB 2017-09-26 03:01:21 +01:00
Lucas De Marchi 1263e20a0d ArduCopter: use static method to construct AC_InputManager 2017-09-26 03:01:21 +01:00
Lucas De Marchi e21e02cfdb ArduCopter: use static method to construct AC_PrecLand 2017-09-26 03:01:21 +01:00
Lucas De Marchi cf6ea9642e global: use static method to construct AP_Terrain 2017-09-26 03:01:21 +01:00
Lucas De Marchi 70d8a08626 ArduCopter: use static method to construct AP_LandingGear 2017-09-26 03:01:21 +01:00
Lucas De Marchi 31db77e47b global: use static method to construct AP_Parachute 2017-09-26 03:01:21 +01:00
Lucas De Marchi 57bbb2e1d9 ArduCopter: use static method to construct AC_Sprayer 2017-09-26 03:01:21 +01:00
Lucas De Marchi eadd650d78 global: use static method to construct AP_RSSI 2017-09-26 03:01:21 +01:00
Lucas De Marchi 4f42facefc global: use static method to construct AC_Avoid 2017-09-26 03:01:21 +01:00
Lucas De Marchi b05610870c global: use static method to construct AP_Rally 2017-09-26 03:01:21 +01:00
Lucas De Marchi b4f5256a9e ArduCopter: add static create method to AP_Rally 2017-09-26 03:01:21 +01:00
Lucas De Marchi c6eb48009b global: use static method to construct AC_Fence 2017-09-26 03:01:21 +01:00
Lucas De Marchi 18aa88b329 global: use static method to construct AP_Mount 2017-09-26 03:01:21 +01:00
Lucas De Marchi c3647f0185 global: use static method to construct AP_Camera 2017-09-26 03:01:21 +01:00
Lucas De Marchi cc53e7bc4b global: use static method to construct AP_ServoRelayEvents 2017-09-26 03:01:21 +01:00
Lucas De Marchi 13d7f58036 global: use static method to construct AP_Relay 2017-09-26 03:01:21 +01:00
Lucas De Marchi 9ce6019138 global: use static method to construct AP_Frsky_Telem 2017-09-26 03:01:21 +01:00
Lucas De Marchi b022c02029 global: use static method to construct AP_BattMonitor 2017-09-26 03:01:21 +01:00
Lucas De Marchi 69b6d95cb2 global: use static method to construct AP_Board_Config{,_CAN} 2017-09-26 03:01:21 +01:00
Lucas De Marchi a74e700006 global: use static method to construct RCMapper 2017-09-26 03:01:21 +01:00
Lucas De Marchi 72fd2d6f05 global: use static method to construct AP_SerialManager 2017-09-26 03:01:21 +01:00
Lucas De Marchi fbe0d9761c global: use static method to construct AP_OpticalFlow 2017-09-26 03:01:21 +01:00
Lucas De Marchi 10529feae6 ArduCopter: use static method to construct AP_Arming_Copter 2017-09-26 03:01:21 +01:00
Lucas De Marchi b36a5919f5 global: use static method to construct AP_Mission
This also move the initialization to be in the header for those that
weren't already to maintain consistency.
2017-09-26 03:01:21 +01:00
Lucas De Marchi de5e044b02 global: use static method to construct AP_RPM 2017-09-26 03:01:21 +01:00
Lucas De Marchi 40fd1b346c global: remove rangefinder from AP_AHRS_NavEKF
AP_AHRS_NavEKF doesn't use the rangefinder, it just delegates the
calls to the right estimator.

For libraries/AP_AHRS/examples/AHRS_Test/AHRS_Test.cpp the initialization
order has also been modified to match the order on vehicles. It's more
correct since it passes a reference when EKF2/EKF3 are already
constructed, while thos constructors use a pointer.  Ideally these
should be moved to an init() method though, or use a get_instance().
2017-09-26 03:01:21 +01:00
Lucas De Marchi 9027a55696 global: use static method to construct RangeFinder 2017-09-26 03:01:21 +01:00
Lucas De Marchi f5c2ffffb9 global: remove DataFlash from AP_Mount::init() 2017-09-26 03:01:21 +01:00
Lucas De Marchi 53c82b4aaf global: use static method to construct DataFlash_Class 2017-09-26 03:01:21 +01:00
Lucas De Marchi 62ac0ab8aa global: use static method to construct AP_Notify 2017-09-26 03:01:21 +01:00
Lucas De Marchi de680dac5b global: use static method to construct AP_Scheduler 2017-09-26 03:01:21 +01:00
Lucas De Marchi 8094482f21 global: use static method to construct AP_GPS 2017-09-26 03:01:21 +01:00
Lucas De Marchi 87b30b4552 global: use static method to construct AP_InertialSensor 2017-09-26 03:01:21 +01:00
Lucas De Marchi c1a957fbf3 global: use static method to construct Compass 2017-09-26 03:01:21 +01:00
Lucas De Marchi 91feec0e14 global: use static method to construct AP_Baro 2017-09-26 03:01:21 +01:00
Lucas De Marchi d213ccbbfc ArduCopter: protect version.h from inclusion and use ap_version.h 2017-09-23 21:37:45 -07:00
Lucas De Marchi 4ef5186733 ArduCopter: do not include version.h/ap_version.h
The interface provided by each vehicle should be used to get the
version.
2017-09-23 21:37:45 -07:00
Lucas De Marchi cd5b018d82 ArduCopter: move version to a static member
We should never include version.h or ap_version.h headers directly
on a header since this will trigger a complete rebuild of the
codebase when we commit to the repository. The ap_version.h header
is auto-generated containing information from the current commit.

If we include it in a header, every other file that ends up including
that header (directly or indirectly) will need to be rebuilt. No
ccache's cache beats having to do nothing when the header is just
not included.

version.h contains information that is kept on a struct inside
each vehicle. Rather than using the macros from each vehicle,
the getter should be preferred, which returns an AP_FWVersion
referente.
2017-09-23 21:37:45 -07:00
Randy Mackay a9f257ddc6 Copter: 3.5.3 release notes 2017-09-21 11:13:02 +09:00
Andrew Tridgell 22bfec4d2a Copter: fixed motor runup check for heli
for all auto-throttle modes we should not allow a mode change to the
mode if the motor runup is not complete.

This moves the code to the set_mode() so it applies to all modes

fixes issue #6956
2017-09-21 08:52:50 +10:00
Andrew Tridgell 8cf8f3a288 Copter: fixed collective input with H_SV_MAN=1 for heli
when H_SV_MAN=1 we do direct pass-thru so the user can test swash
range. The problem is that it uses norm_input() for throttle, which
depends on RC3_TRIM. Nowhere else in heli or copter do we depend on
RC3_TRIM, so the user gets a misleading idea of behaviour when testing
their swash.
2017-09-21 08:52:50 +10:00
Randy Mackay a8a5c1d332 Copter: command-long DO_SET_HOME check first param is zero
Also do not use current location just because lat,lon,alt are all zero
2017-09-20 12:14:38 +09:00
Randy Mackay d982cfed4a Copter: accept DO_SET_HOME within COMMAND_INT 2017-09-20 12:14:38 +09:00
Randy Mackay 70cf21a5ba Copter: accept more mav-frame types
accept mav frames whether or not they have _INT appended
2017-09-20 12:14:38 +09:00
Peter Barker 45d056fcf0 Copter: ekf position checks are done before we call failsafe_ekf_event 2017-09-19 12:44:43 +01:00
Peter Barker d5caff3f1b Copter: do not enter ekf-failsafe based on position if pos not needed 2017-09-19 12:44:43 +01:00
Peter Barker ff82f23cf6 Copter: factor out a ekf_check_position_problem method 2017-09-19 12:44:43 +01:00
Peter Barker 84a873a520 Copter: remove redundant check; we will never failsafe_ekf_event if disarmed
See line 37
2017-09-19 12:44:43 +01:00
Peter Barker 0afe1e7473 Copter: move handling of SET_GPS_GLOBAL_ORIGIN up 2017-09-19 15:44:23 +09:00
Randy Mackay 1b3cc9289b Copter: support SET_GPS_GLOBAL_ORIGIN
also remove setting of origin from DO_SET_HOME command
initialise ekf_origin location when consuming SET_GPS_GLOBAL_ORIGIN
set_ekf_origin performs sanity check on location
2017-09-19 10:30:15 +09:00
Randy Mackay 44a436642b Copter: complete rename to SmartRTL
Also fix parameter description for CH7_OPT
2017-09-15 08:58:14 +09:00
Michael du Breuil ffc2aeee32 Copter: Support landing flight termination 2017-09-13 13:15:08 -07:00
Peter Barker 6b5fd5fbdd Copter: move gcs_out_of_time into GCS object 2017-09-12 18:28:07 +01:00
Randy Mackay b1d1b5122b Copter: 3.5.3-rc1 release notes 2017-09-12 16:43:15 +09:00
squilter 4b57a4a231 Copter: rename SafeRTL to SmartRTL 2017-09-09 14:05:41 +09:00
squilter 7abb5b10fc Copter: build scripts changed from SafeRTL to SmartRTL 2017-09-09 14:05:41 +09:00
Randy Mackay ed0203e53c Copter: smooth safertl return journey using fast waypoints 2017-09-09 14:05:41 +09:00
Randy Mackay 6684e3de56 Copter: minor comment change for SafeRTL 2017-09-09 14:05:41 +09:00
Randy Mackay 8df042f00c Copter: complete addition of SafeRTL flight mode 2017-09-09 14:05:41 +09:00
Randy Mackay 218983d594 Copter: safe-rtl changes after peer review 2017-09-09 14:05:41 +09:00
squilter ba0e08552f Copter: add SafeRTL flight mode 2017-09-09 14:05:41 +09:00
squilter ec8c4b1744 Copter: add AP_SafeRTL to build 2017-09-09 14:05:41 +09:00
Peter Barker 3f67dfe4fe Copter: move handling of do_send_banner up 2017-08-30 15:54:47 +01:00
Peter Barker 3da70f19c1 Copter: handle param_request_list in GCS_MAVLINK base class 2017-08-30 15:54:47 +01:00
Peter Barker e6ac68fd2a Copter: handle param_set in GCS_MAVLINK base class 2017-08-30 15:54:47 +01:00
Peter Barker bb06db6389 Copter: move send_autopilot_request calls up to GCS base class 2017-08-30 15:54:46 +01:00
Peter Barker 470e790117 Copter: add constant structure holding firmware version 2017-08-30 15:54:46 +01:00
squilter 00ace08b54 Copter: minor formatting fixes 2017-08-30 20:07:11 +09:00
Peter Barker 30fac9160e Copter: mavlink PERF messages also spit out average and standard deviation 2017-08-29 21:31:46 +01:00
Peter Barker 89e6e70235 Copter: remove MAIN_LOOP_RATE in favour of parameter value 2017-08-29 08:41:07 +09:00
Peter Barker 02a590024d Copter: base loop time remaining on variable loop rate 2017-08-26 09:33:45 +09:00
Peter Barker 0b6de644fb Copter: add ArduSub to list of SYSID_SW_TYPE 2017-08-24 19:50:38 +09:00
Peter Barker 5103739ea3 Copter: remove unused CH6 defines 2017-08-24 19:48:17 +09:00
Lucas De Marchi be402374ea ArduCopter: use FALLTHROUGH define
When falling through on a case switch, allow to add an empty statement
with the correct attribute to tell the compiler this behavior is
intended.
2017-08-22 23:59:13 -07:00
Randy Mackay 34560fb1fb Copter: remove enabled check from optflow init 2017-08-23 11:19:14 +09:00
Randy Mackay def17582c6 Copter: integrate simpler Log_Write_EKF 2017-08-23 11:19:14 +09:00
Peter Barker b0c7766197 Copter: continuously reevaluate rc calibration checks
Stop "latching" calibration checks - if an RC radio's calibration
changes after it passes once, these patches allow the rc calibraiton
checks to then fail.
2017-08-21 09:05:31 +09:00
Peter Barker 19e409f7f4 Copter: move serial_control case to base class 2017-08-17 12:42:31 +01:00
Peter Barker 6db348bab3 Copter: move play_tune and led_control handling to base class 2017-08-17 12:27:10 +01:00
Peter Barker aa06fc499c Copter: use GCS_MAVLINK subclasses to handle set_mode 2017-08-16 11:58:10 +10:00
Michael du Breuil 5cfe4d5a8c Copter: Expose the AFS instance to MAVLink 2017-08-15 15:14:56 +01:00
Peter Barker 0a2177de58 Copter: move Copter RC checking code into library 2017-08-14 15:32:25 +09:00
Randy Mackay 14f6d3e03e Copter: 3.5.2 release notes 2017-08-14 12:12:01 +09:00
Peter Barker c6b9c84d1f Copter: remove CLI 2017-08-14 10:23:50 +09:00
Peter Barker fa2b500e93 Rover: remove CLI 2017-08-14 10:23:50 +09:00
Peter Barker 55af774e98 Copter: send gps messages as separate queued messages 2017-08-09 16:18:22 +01:00
Peter Barker 56160a8bbd Copter: move sending of gps_raw up 2017-08-09 16:18:22 +01:00
Peter Barker ff81186951 Copter: move sending of system_time up 2017-08-09 16:18:22 +01:00
Peter Barker 7ca146878d Copter: move sending of camera_feedback up 2017-08-09 16:18:22 +01:00
Peter Barker da889bdff5 Copter: move sending of meminfo up 2017-08-09 16:18:22 +01:00
Jani Hirvinen bdbe26eb28 Copter: minor comment fix
small edit on comments to kickoff autobuild
2017-08-09 20:14:22 +09:00
Peter Barker c36a20ab54 Copter: use new retry_deferred method 2017-08-05 23:14:31 +01:00
Randy Mackay 4368df7f11 Copter: 3.5.2-rc2 release notes 2017-08-05 16:46:42 +09:00
Randy Mackay 8dadbaa850 Copter: landing gear init on startup 2017-08-05 11:20:41 +09:00
Randy Mackay c3fd354452 Copter: enable landing gear based on RC output
previously it was enabled based on the transmitter's auxiliary switch
being setup
2017-08-05 11:20:41 +09:00
Randy Mackay 5b8e7cfdf9 Copter: landinggear_update formatting change
no functional change
2017-08-05 11:20:41 +09:00
Peter Barker db080ed60e Copter: stop sending MSG_SERVO_OUT messages
This didn't ever result in a message being sent on Copter
2017-08-03 14:34:33 +01:00
Peter Barker 7c37bb324b Copter: move try_send_message queued_param_send up 2017-08-03 14:34:33 +01:00
Peter Barker 431e3443bd Copter: move try_send_message send_hwstatus up 2017-08-03 14:33:37 +01:00
Peter Barker 3e5665735f Copter: move try_send_message mission handling up 2017-08-03 14:24:47 +01:00
Peter Barker 2a62b57e11 Copter: move try_send_message compass message handling up 2017-08-03 14:24:46 +01:00
Peter Barker 4b63443633 Copter: correct misleading comment 2017-08-03 14:24:46 +01:00
Peter Barker 31b33b2232 Copter: base SYS_STATUS load average on variable loop rate 2017-08-01 19:39:27 +01:00
squilter f7a00b911e Copter: minor format fix for motors.cpp 2017-07-31 17:27:15 +09:00
Randy Mackay 167ced1279 Copter: battery arming checks call parent AP_Arming 2017-07-31 17:19:55 +09:00
Randy Mackay 9cbab6ed4b Copter 3.5.1 release notes 2017-07-31 11:49:12 +09:00
Peter Barker f56c9bd96d Copter: move common mavlink camera handling up 2017-07-28 14:32:58 +01:00
Peter Barker cdf9ebcb39 Copter: camera is responsible for taking distance-based-images and logging 2017-07-28 14:27:53 +01:00
Peter Barker 192310a68e Copter: move gps inject handling up to GCS_MAVLINK 2017-07-27 12:03:25 +01:00
Randy Mackay f97e43919b Copter: add gps glitch notification and pre-arm check 2017-07-27 14:16:23 +09:00
Randy Mackay 52bf93dd80 Copter: 3.5.1-rc1 release notes 2017-07-27 12:25:22 +09:00
Peter Barker f1ab50d4ea Copter: handle common GPS messages in base GCS_MAVLINK class 2017-07-25 14:00:45 +01:00
khancyr 88aa1e447a Copter: adapt to new send_proximity API 2017-07-24 13:44:43 +01:00
khancyr 0710018a42 Copter: move proximity log to DataFlash (NFC) 2017-07-24 13:44:43 +01:00
khancyr 49755063ab Copter: move send_proximity to GCS common code (NFC) 2017-07-24 13:44:43 +01:00
khancyr 743d9ec65f Copter: report polygon fence breach 2017-07-21 09:47:00 +09:00
Peter Barker 89478d5a28 Copter: ensure logging is working as part of arming checks 2017-07-19 16:37:28 +01:00
Peter Barker e45efeb829 Copter: move starting of new logs into DataFlash 2017-07-19 16:37:28 +01:00
Peter Barker cbde87b390 Copter: remove pointless pre_arm_gps_checks function 2017-07-19 16:34:57 +01:00
Peter Barker baaad8df94 Copter: use common board_voltage_checks code 2017-07-19 16:34:57 +01:00
Peter Barker a7bc111485 Copter: use common baro arming check function 2017-07-19 16:34:57 +01:00
Peter Barker eb0edc9b5b Copter: remove MSG_STATUSTEXT entirely 2017-07-18 16:12:59 +01:00
Peter Barker ad1c379445 Copter: move handling of PREFLIGHT_SET_SENSOR_OFFSETS up 2017-07-17 14:17:19 +01:00
Peter Barker fe16691c6e Copter: move handling of MAG_CAL command longs up 2017-07-17 14:17:19 +01:00
Peter Barker ecda9116ba Copter: move MAV_CMD_START_RX_PAIR handling to base class 2017-07-17 14:17:19 +01:00
Randy Mackay 73d994a834 Copter: update 3.5.0 release notes 2017-07-17 11:15:05 +09:00
Peter Barker 7042d3e9c9 Global: all vehicles get AP_Relay and AP_ServoRelayEvent libraries 2017-07-17 00:06:31 +01:00
Peter Barker b14964eb1e Copter: move mavlink support for servo/relay up 2017-07-16 23:56:00 +01:00
Peter Barker 3e3a8717c5 Copter: add common handling of mavlink command messages 2017-07-16 23:56:00 +01:00
Michael du Breuil a81bfe644a Copter: Document max loop time as being in microseconds 2017-07-15 17:27:04 +09:00
Peter Barker 480a83fdef Copter: move rally-point handling up 2017-07-14 01:28:05 +01:00
Peter Barker 7bb28175d7 Copter: remove unneeded telemetry_delayed parameter 2017-07-12 17:01:36 +01:00
Peter Barker 016eeaa258 Copter: move handling of incoming statutext messages up 2017-07-12 16:52:24 +01:00
Randy Mackay 260412bf0f Copter: 3.5.0-rc11 release notes 2017-07-12 13:56:01 +09:00
Randy Mackay c1433e0220 Copter: minor comment and formatting fixes
no functional change
2017-07-12 13:27:45 +09:00
Randy Mackay ed65d55f5e Copter: guided stops rotating if no updates received for 3 seconds 2017-07-12 13:27:45 +09:00
Randy Mackay 2b98fd765d Copter: guided_set_destination accepts relative yaw 2017-07-12 13:27:45 +09:00
Randy Mackay 4c9e118ceb Copter: set_auto_yaw_look_at_heading takes bool for relative angle arg
No functional change
2017-07-12 13:27:45 +09:00
Randy Mackay 9b05f1d9c7 Copter: add auto-yaw-rate and replace guided_angle_state.use_yaw_rate
We use the auto_yaw_mode in auto and guided modes to allow various yaw behaviours
This commit adds a new AUTO_YAW_RATE control to the mode and uses it within guided mode.
This new RATE control is not currently used within auto mode because there is no way (yet) for a mission command to specify a desired rate.
2017-07-12 13:27:45 +09:00
kouseii 4dd7d9eaff Copter: guided mode supports heading and yaw-rate target 2017-07-12 13:27:45 +09:00
Peter Barker 8a1fc6a406 Copter: remove global static send_statustext_chan 2017-07-11 23:53:53 +01:00
Peter Barker 592729733e Copter: eliminate GCS_MAVLINK::send_statustext_all 2017-07-11 23:53:53 +01:00
Peter Barker a4d167affe Copter: eliminate global static GCS_MAVLINK::send_home_all 2017-07-11 23:48:39 +01:00
Peter Barker 3660236a0d Copter: move common mission handling up to GCS_MAVLINK 2017-07-11 23:45:16 +01:00
Peter Barker 358555446b Copter: eliminate gcs_send_mission_item_reached wrapper 2017-07-11 23:45:16 +01:00
Peter Barker 0ac045febe Copter: eliminate gcs_send_message wrapper 2017-07-11 23:45:16 +01:00
Andrew Tridgell 7473471f38 Copter: reverse IDs in g2 for TCAL and tx_type
as discussed with Randy
2017-07-10 17:07:57 +10:00
Tom Pittenger 25b014524a Copter: use send_text method on the GCS singleton 2017-07-09 19:03:26 -04:00
Peter Barker f60389d4aa Copter: use send_text method on the GCS singleton 2017-07-09 17:17:29 -04:00
Peter Barker 037cd2e9c6 ArduCopter: use Notify singleton for sending statustext 2017-07-09 17:17:29 -04:00
Randy Mackay a6fbae16bf Copter: 3.5.0-rc10 release notes 2017-07-08 10:51:23 +09:00
Randy Mackay 2e56e10d9c Copter: ekf check adds position variance check
two of three of compass, velocity and position variances being high will trigger the ekf failsafe
2017-07-08 08:39:43 +09:00
Peter Barker d9b45cc202 Copter: create GCS subclass, use inheritted methods 2017-07-07 16:18:37 +01:00
Peter Barker 2d11544ea8 Copter: remove redundant arming check defines 2017-07-06 11:55:12 +09:00
Dr.-Ing. Amilcar Do Carmo Lucas 9994e9b773 Copter: improve stream descriptions (NFC) 2017-07-04 08:12:57 +09:00
Eugene Shamaev 24c390ade0 ArduCopter: move of CAN parameters into separate group 2017-07-03 11:44:32 +01:00
Randy Mackay c75f30eb9b Copter: 3.5.0-rc9 release notes 2017-07-03 14:42:26 +09:00
Randy Mackay 41752eef8b Copter:default RC_FEEL to 50 2017-07-03 09:34:07 +09:00
Peter Barker 37abc1b02f Copter: check dataflash to see if we should log backend gps messages 2017-06-29 15:43:38 +01:00
Peter Barker 776d691c79 Copter: use DataFlash should_log to determine raw logging 2017-06-29 15:26:27 +01:00
Peter Barker cfbde937c6 Copter: move should_log check of log bitmask into DataFlash 2017-06-29 15:26:27 +01:00
Peter Barker 8b57405143 Copter: handle knowledge of in_log_download in DataFlash 2017-06-27 03:10:43 +01:00
Peter Barker 45a55bfa5f Copter: move send-logs-via-mavlink code into DataFlash 2017-06-27 03:10:43 +01:00
Leonard Hall f29951c2bf Copter: fix autotune accel max not being used until reboot
Once autotune completes successfully, the discovered acceleration maximums should be used if the pilot tests the tune
2017-06-22 15:19:57 +09:00
Randy Mackay 356a405e2d Copter: autotune minor format fix 2017-06-22 15:18:04 +09:00
Leonard Hall 2888096a42 Copter: autotune keeps constant attitude while holding position 2017-06-22 15:18:04 +09:00
Randy Mackay 51c20637e5 Copter: fix compile error when logging disabled
Also slightly re-order placement of functions
2017-06-22 15:18:04 +09:00
Leonard Hall 7eab1239c7 Copter: attitude logging at 400hz 2017-06-22 15:18:04 +09:00
Michael du Breuil f0cb234228 Copter: Handle NAV_CONTROLLER_OUTPUT.wp_dist overflowing 2017-06-20 15:41:50 +01:00
Andrew Tridgell 9d7ed495da Copter: call set_likely_flying() 2017-06-20 09:44:44 +10:00
Peter Barker 4af3b31128 Copter: move MAVLINK_MSG_ID_REMOTE_LOG_BLOCK_STATUS handling up 2017-06-17 15:07:48 +01:00
Andrew Tridgell ba21c1e67d Copter: set RC_SPEED default to 16kHz for brushed 2017-06-17 17:37:45 +10:00
Peter Barker 4163455d97 Copter: stop using in_mavlink_delay as a proxy for disabling logging 2017-06-16 17:07:48 +01:00
Peter Barker cb41f09d2e Copter: call dataflash should_log method 2017-06-16 17:07:48 +01:00
Randy Mackay cb77c1acc9 Copter: 3.5.0-rc8 release notes 2017-06-15 13:48:44 +09:00
Peter Barker 019dd02569 Copter: simplify dataflash initialisation 2017-06-14 12:20:29 +01:00
Shingo Matsuura 0800c6be52 Copter: add beacon object to avoidance object 2017-06-14 16:07:32 +09:00
Randy Mackay a5ea9420c0 Copter: landing gear position set less often
This change means no pwm output is sent to the landing gear servos until the pilot has moved the switch
2017-06-13 13:56:07 +09:00
Peter Barker 3ee56f5475 Copter: StartUnstartedLogging replaces logging_started/start_logging 2017-06-11 20:34:12 +01:00
Peter Barker 43a16b9327 Copter: simplify should_log (NFC) 2017-06-11 20:34:12 +01:00
Peter Barker d36e8fa51e Copter: eliminate calls to manipulate _writes_enabled 2017-06-11 20:34:12 +01:00
Peter Barker 2bb22da599 Copter: simplify start_logging 2017-06-11 20:34:12 +01:00
Pierre Kancir d5cc1e64ed GCS_Common: rename send_rangefinder to send_rangefinder_downward 2017-06-08 01:32:04 +01:00
Pierre Kancir 73038a0e09 ArduCopter: GCS_mavlink style correction 2017-06-08 01:31:52 +01:00
Pierre Kancir ac0a300415 ArduCopter: correct msg send by proximity 2017-06-08 01:31:52 +01:00
Pierre Kancir 261eb387eb ArduCopter: change rangefinder msg for common one 2017-06-08 01:31:43 +01:00
Pierre Kancir 156863d10a ArduCopter: add DISTANCE_SENSOR support 2017-06-08 01:22:07 +01:00
Peter Barker 758414cfe5 Copter: allow mavlink messages to be exchanged on failed boot 2017-06-07 12:56:46 +01:00
Randy Mackay cb76bd8f3d Copter: compass set-initial-location uses ahrs location
Previously it could attempt to use a gps location even if gps was not being used
Also compass-accumulate moved to sensors.cpp
2017-06-07 13:01:38 +09:00
Randy Mackay 814cadac68 Copter: consolidate set_home functions
added lock argument instead of having twice as many functions
no functional change
2017-06-07 13:01:38 +09:00
Randy Mackay ec491d3c6b Copter: init_compass get g.compass_enabled check
No functional change
2017-06-07 10:34:13 +09:00
Leonard Hall 8def1d257e Copter: pass battery resistance estimate to motors 2017-06-06 14:57:04 +09:00
Dr.-Ing. Amilcar Do Carmo Lucas f8aa91681e Copter: Improve the PWM parameters descriptions 2017-06-06 11:06:26 +10:00
Randy Mackay 010dc103be Copter: increase RC input deadzones for roll pitch and yaw
Copter-3.5 testing resulted in a significant number of users reporting various issues like poshold and autotune were not functioning because their RC inputs were straying out of the deadzones
2017-06-01 10:10:57 +09:00
Leonard Hall c61d0a7373 Copter: reduce RC_FEEL default to 25 2017-06-01 10:06:20 +09:00
murata 1a76c28655 Copter: add dodeca-hexa 2017-05-27 14:21:13 +09:00
Randy Mackay 70ed572476 Copter: minor formatting fix
This is mostly just to trigger compilation of the latest beta
2017-05-25 17:53:20 +09:00
Randy Mackay 5f0214dd41 Copter: update AC3.5.0-rc7 release notes 2017-05-25 13:29:35 +09:00
Randy Mackay 9002a635e2 Copter: 3.5.0-rc7 release notes 2017-05-25 13:29:33 +09:00
Paulo Neves 9c6a7c170f Copter: Add MAV_CMD_DO_SET_CAM_TRIGG_DIST support 2017-05-25 09:35:22 +09:00
Michael du Breuil 6ba53cf11c Copter: Ignore Landing message 2017-05-24 15:22:27 -07:00
Randy Mackay a77f21da4a Copter: sport and acro trainer limits based on target attitude
previously the trainer used the vehicle's actual attitude meaning that the target could get far past the limits if there was an attitude error
2017-05-23 19:44:52 +09:00
Randy Mackay a0c5ac1949 Copter: fix compassmot for oneshot ESCs 2017-05-23 13:11:46 +09:00
Andrew Tridgell c459a25194 Copter: adjust autotune poshold
only reset position on pitch or roll input

also increases the max angle error for twitching in autotune. When a
vehicle is not well tuned the limit can prevent twitching
2017-05-23 09:41:11 +09:00
Randy Mackay 010665f915 Copter: fix esc calibration for one-shot
the cork and push need to be done from the vehicle level
2017-05-23 07:57:17 +09:00
Randy Mackay b4d7d4f43f Copter: resolve compiler warnings in autotune GCS messages 2017-05-22 12:34:06 +09:00
Peter Barker d5afd01ef2 Copter: remove duplicate autotune rotation warning 2017-05-18 16:28:00 +09:00
Randy Mackay ca8ae06bba Copter: minor format fix to landing-gear update function 2017-05-18 12:26:19 +09:00
Peter Barker 34eae9d9cb Copter: AutoTune: include axis being tuned in output 2017-05-18 09:36:00 +09:00
Peter Barker 0bc17645fb Copter: AutoTune: add gcs messages detailing wait-for-level state 2017-05-18 09:36:00 +09:00
Peter Barker 586a5df814 Copter: add GCS messaging during autotune 2017-05-18 09:36:00 +09:00
Dr.-Ing. Amilcar Do Carmo Lucas f366095113 Copter: Use SI units conventions in parameter units
Follow the rules from:
http://physics.nist.gov/cuu/Units/units.html
http://physics.nist.gov/cuu/Units/outside.html
and
http://physics.nist.gov/cuu/Units/checklist.html
one further constrain is that only printable (7bit) ASCII characters are allowed
2017-05-17 18:07:25 +10:00
Dr.-Ing. Amilcar Do Carmo Lucas 60aeade0f4 Copter: Add missing @RebootRequired: True 2017-05-15 21:51:16 +09:00
Randy Mackay 376b9e994f Copter: AC3.5-rc6 release notes 2017-05-15 15:04:28 +09:00
Randy Mackay 91d4b4777b Copter: respond to param list request after motor init 2017-05-15 14:13:43 +09:00
Pierre Kancir 436d0f8c84 ArduCopter: radio fix passthrough range on heli/coax/single 2017-05-13 10:19:20 +09:00
Randy Mackay caa2148e45 Copter: move esc calibration startup check to after servo function initialisation 2017-05-11 11:30:05 +09:00
Randy Mackay 0e7f12049c Copter: fix esc calibration is safety switch has been disabled 2017-05-11 11:30:05 +09:00
Randy Mackay f9c8bb1b01 Copter: ensure esc calibration only occurs on next reboot
It was possible for a board with no safety switch attached to get stuck waiting for the user to press the non-existance switch.  Rebooting now resolves the problem because the ESC_CAL parameter is reset to zero regardless of whether the calibration completes or not.
2017-05-11 11:30:05 +09:00
Randy Mackay a3450a955d Copter: fix LED notify during auto esc calibration 2017-05-11 11:30:05 +09:00
karthik.desai d7976078a5 Copter: fix typo in comments 2017-05-08 10:08:31 +09:00
murata 8fd9c73b78 Copter: Add SuperSimpleMode "2" to Simple Mode setting. 2017-05-08 09:31:23 +09:00
Andrew Tridgell 3b33434695 Copter: removed AP_Airspeed from vehicle code 2017-05-04 22:59:02 -07:00
Luis Vale Gonçalves 04cb1027b8 Copter: minor fix to release notes 2017-05-03 17:10:27 +09:00
Randy Mackay f2131ed2d0 Copter: AC3.5-rc5 release notes 2017-05-03 14:08:45 +09:00
Peter Barker b37e64b23c Copter: stop appending lf to PERF message 2017-05-01 16:21:55 +01:00
Peter Barker 069e0d1973 Copter: move init of DataFlash references into vehicle init
It is possible to start a log before the existing codepath is crossed.
2017-05-01 15:04:34 +01:00
Peter Barker 6ccb7cf3f4 Copter: tidy dataflash Frame reporting 2017-05-01 19:16:47 +10:00
Andrew Tridgell 22791b7272 Copter: use common send_queued_parameters() 2017-05-01 14:36:10 +10:00
Andrew Tridgell 49b18819ce Copter: enable channels in ESC calibration 2017-05-01 14:32:18 +10:00
Andrew Tridgell 2ba6e7af35 Copter: fixed aux servos in RC failsafe
we should always output to channels
2017-05-01 14:32:18 +10:00
Andrew Tridgell 10b89db498 Copter: call BoardConfig.init_safety() at end of startup
this fixes a bug where motors can start on soft reboot
2017-04-30 21:47:04 +10:00
Randy Mackay aab27d8d0e Copter: auto loiter initialisation simplified
The simpler set_wp_destination can be used instead of set_wp_origin_and_destination
2017-04-28 09:10:02 +09:00
Randy Mackay 65e97a9503 Copter: rtl initialises wp controller earlier
We need to initialise wp controller or the build_path could use the wrong speeds and accelerations when calculating the origin (aka stopping point)
2017-04-28 09:10:02 +09:00
Andrew Tridgell 1875d2adab Copter: fixed duplicate include of AP_ADC library 2017-04-27 18:32:26 +10:00
Randy Mackay 81f8ab3933 Copter: guided init uses vertical stopping point 2017-04-27 14:36:23 +09:00
Randy Mackay a342b73604 Copter: guided velocity contoller inits accel and jerk
In practice this has no functional impact because the guided_pos_control_start initialises these values (using AC_WPNav) and it is not currently possible for a user to get to the velocity controller without having first used the guided position controller
2017-04-27 14:35:46 +09:00
Randy Mackay 1a246851fc Copter: enable radio failsafe by default 2017-04-24 17:07:42 +09:00
Peter Barker afbdbcce26 Copter: log GPS detection state to DF on log startup 2017-04-23 21:04:17 +01:00
karthik.desai afc382c342 Copter: moved beacon logging to dataflash 2017-04-22 10:55:08 +09:00
Randy Mackay 8f43b60247 Copter: set EKF origin from first do-set-home command 2017-04-22 10:37:31 +09:00
Randy Mackay 3348ab4fa8 Copter: send upward DISTANCE_SENSOR message to GCS 2017-04-20 18:11:43 +09:00
Randy Mackay 496e8f3cdb Copter: integrate proximity method rename 2017-04-20 18:11:43 +09:00
Andrew Tridgell 1a8669201e Copter: ignore MSG_AOA_SSA 2017-04-19 20:48:42 +10:00
Randy Mackay 713c08672f Copter: integrate AP_VisualOdom 2017-04-19 11:04:40 +09:00
Randy Mackay d5dd7e719a Copter: add AP_VisualOdom to build 2017-04-19 11:04:40 +09:00
Andrew Tridgell ebde6e1ce3 Copter: output any servo channels on motor output
if we have any auxillary servo channels we need to calculate the
output value
2017-04-18 09:34:42 +09:00
Randy Mackay 032bfad79f Copter: move rc input check to esc_calibration_startup_check
No functional change
2017-04-18 09:29:55 +09:00
Randy Mackay fc675a1e4a Copter: do not allow motor test before initialisation completes 2017-04-18 09:29:53 +09:00
Randy Mackay 1bfbf0d43f Copter: enable motors at end of initialisation 2017-04-18 09:29:51 +09:00
Francisco Ferreira bf22919a8c Copter: add support for MANUAL_CONTROL message 2017-04-12 16:16:11 +09:00
Michael du Breuil ea89bd1178 Copter: Send BATTERY_STATUS 2017-04-12 10:21:49 +09:00
murata 597dbb2df4 Copter: Compare bit variables, change set values.
Copter: Change from comment 1 to true.
2017-04-12 09:19:07 +09:00
Tom Pittenger 01de4b1176 Copter: clarify release notes for Intel Aero
update ReleaseNotes to clarify that the copter 3.4.0-rc4 (06-Sep-2016) note "Intel Aero flight controller support" does not mean the Intel Aero RTF.
2017-04-10 16:42:25 -07:00
Randy Mackay 7478ae9eb4 Copter: TUNE parameter description fixes 2017-04-08 15:35:05 +09:00
Randy Mackay 7f93818d31 Copter: 3.5-rc4 release notes 2017-04-08 15:32:01 +09:00
Andrew Tridgell b4d9397821 Copter: re-arrange fast_loop for minimum latency
this makes motor outputs as responsive as possible to gyros
2017-04-03 13:04:11 +09:00
Randy Mackay 5497030ebf Copter: version to 3.6-dev 2017-03-30 08:19:18 +09:00
Jacob Walser 587c50c1a1 Copter: Remove redundant nested #if CLI_ENABLED 2017-03-29 19:20:51 +01:00
Jonathan Challinger 054aab738b Copter: remove const qualifier from do_precision_loiter 2017-03-29 14:06:12 +09:00
Andrew Tridgell 01206f9e59 Copter: add available memory to PM message 2017-03-27 14:35:21 +09:00
Andrew Tridgell 6bb5c16fb8 Copter: allow for HELI_DUAL configurations 2017-03-25 16:22:10 +11:00
Randy Mackay 50523619b9 Copter: 3.5-rc3 release notes 2017-03-25 11:50:40 +09:00
Randy Mackay dfe3922d82 Copter: modify pre-arm check wording
- slight wording change to RC pre-arm check
- shorten Accelerometers to Accels to allow failure message to fit on MP HUD
2017-03-25 10:50:58 +09:00
Randy Mackay bff9189afc Copter: fixup fence pre-arm checks
- require GPS if polygon fence is enabled
- fence pre-arm failure shows failure message
- tell user fence is enabled which is why GPS is required
2017-03-25 10:50:58 +09:00
Lucas De Marchi cc7633f272 ArduCopter: replace board ifdef with feature ifdef 2017-03-24 12:06:19 +11:00
Lucas De Marchi b17acfee12 Add aerofc support
Flight Controller board that comes on Intel Aero RTF Drone.
2017-03-24 12:06:19 +11:00
Jacob Walser 353202e03c Copter: Fix parameter metadata 2017-03-22 16:16:26 -07:00
Randy Mackay 15d96b4b5d Copter: release notes for 3.4.6 2017-03-15 09:40:17 +09:00
Andrew Tridgell 54b852ebfe Copter: fixed var table loading for heli single parms
we were not loading parameters such as the swash angle
2017-03-15 11:31:45 +11:00
Andrew Tridgell dae1567d6c Copter: log home and origin on logging start 2017-03-14 10:51:15 +11:00
Randy Mackay 375f7b15ff Copter: 3.5-rc2 release notes 2017-03-13 12:25:07 +09:00
Randy Mackay 8140353c64 Copter: log event when primary GPS changes 2017-03-13 11:31:51 +11:00
Randy Mackay b30d743812 Copter: AP_Arming calls parent's gps checks
Allows removing some duplicate code
2017-03-13 11:31:51 +11:00
Peter Barker 1d70a337dd Copter: remove unused desired_climb_rate variable 2017-03-09 19:52:58 +11:00
Randy Mackay ca4cbaeb39 Copter: run rate controllers before AHRS/EKF update
This reduces lag between IMU updates and motor outputs by 0.6 milliseconds
2017-03-03 13:14:28 +11:00
Randy Mackay e8c5612587 Copter: fix reference to PosControl param descriptions
No functional change
2017-03-01 14:59:44 +09:00
Randy Mackay 627e3faf41 Copter: fix SYSID_ENFORCE parameter description 2017-02-28 15:06:51 +09:00
Andrew Tridgell 0d1bcd3b94 Copter: added automatic yaw to autotune position control 2017-02-27 19:34:44 +09:00
Andrew Tridgell fa119f8231 Copter: enable poshold in autotune only from LOITER or POSHOLD 2017-02-27 19:34:42 +09:00
Andrew Tridgell 37fca03db3 Copter: implement simple position hold during autotune
this holds position during tuning with low gain
2017-02-27 19:34:36 +09:00
Randy Mackay c100f53ee6 Copter: add upward distance to proximity logging 2017-02-27 15:18:24 +09:00
Randy Mackay 34726208b2 Copter: clarify CHX_OPT avoidance and adsb-avoidance 2017-02-27 15:18:23 +09:00
Randy Mackay 51c00f8144 Copter: use only downward facing rangefinder 2017-02-27 15:18:16 +09:00
Lucas De Marchi a589a84e32 ArduCopter: just call set_throttle_range()
Now set_throttle_range in AP_Motors does the right thing, calling out
the RCOutput method.
2017-02-26 13:38:24 +11:00
Jacob Walser 868be023ee Copter: Refactor fence.get_safe_alt() to fence.get_safe_alt_max() 2017-02-21 11:26:14 +11:00
Andrew Tridgell f1917dddd0 Copter: changes for AC_WPNav 2017-02-18 17:26:43 +11:00
Andrew Tridgell 92fdef5b97 Copter: changed for AP_AHRS_View on AC_AttitudeControl 2017-02-18 17:26:43 +11:00
Andrew Tridgell aad412eaef Copter: support tailsitter frame class 2017-02-18 17:26:43 +11:00
Andrew Tridgell 3cb88d0a23 Copter: added tailsitter frame support 2017-02-18 17:26:43 +11:00
Andrew Tridgell 7efca1881c Copter: fixed a problem with initial parameter fetch
if the GCS connects before the motors have been allocated then it will
get an incorrect parameter count from the MAVLink param protocol. We
need to prevent the PARAM_REQUEST_LIST message from being replied to
until motors are allocated which is done as part of init_ardupilot
2017-02-15 17:16:30 +10:00
Andrew Tridgell 6b6d03eb8d Copter: fixed upgrade of parameters
now that we dynamically allocate many key objects in copter we need to
move the parameter upgrade code to after when the objects are allocated
2017-02-15 15:02:06 +10:00
Andrew Tridgell d8972d5344 Copter: setup frame type parameter flags 2017-02-14 19:50:01 +11:00
Peter Barker 65a182a068 Copter: not in log download upon log erase
erase is a synchronous operation
2017-02-13 11:36:16 +11:00
Peter Barker 029aeeb4fd Copter: support for a GCS singleton 2017-02-13 09:32:01 +11:00
Peter Barker f49f153da0 Copter: rename gcs[] to gcs_chan[]
Wish to use gcs() to return the gcs singleton
2017-02-13 09:32:01 +11:00
Randy Mackay d2cc340587 Copter: 3.4.5 release notes 2017-02-11 15:15:42 +09:00
Clément 3aa17d17eb Copter : set land_complete to false during guided takeoff (same fix as for auto takeoff bug) 2017-02-07 20:19:17 +09:00
Dr.-Ing. Amilcar Do Carmo Lucas 4161c34e61 Copter: rename MSG_RADIO_OUT to MSG_SERVO_OUTPUT_RAW to better describe what it is 2017-02-07 11:41:12 +11:00
Peter Barker b7f982d7ce Copter: support for arming and disarming using an auxsw 2017-02-06 16:48:50 +09:00
Andrew Tridgell 00711f5a98 Copter: fixed typo in param generation 2017-02-06 15:36:52 +11:00
Andrew Tridgell 79b23dff0e Copter: fixed parameter path 2017-02-06 15:12:32 +11:00
Michael Day 49e3ce8e75 Copter: Now recognizes DO_FENCE_ENABLE mission command. 2017-02-05 00:10:14 +00:00
Pierre Kancir 1455f8c513 Copter: correct advance failsafe 2017-01-31 11:22:54 +09:00
Randy Mackay d3d6099540 Copter: update 3.5-rc1 release notes 2017-01-28 23:01:10 +09:00
Randy Mackay 4f5ca37df4 Copter: 3.5-rc1 release notes 2017-01-28 17:08:03 +09:00
murata 8f926bd177 Copter: Unify from print or println to printf. 2017-01-27 18:20:22 +11:00
Peter Barker 4aaeb4bfed Copter: get mav heartbeats out when board detection fails 2017-01-27 13:48:23 +09:00
Randy Mackay 6726d94537 Copter: update notify during ESC calibration
The notify devices including the RGB were not being updated meaning the main LED was normally frozen or off during calibration.  The desired behaviour is that it flashes red, blue, yellow.
2017-01-27 12:14:56 +09:00
Randy Mackay a25f51c893 Copter: delay up to 2sec for first radio pulse
Pixracer boards can take 1 second (or possibly longer) to start reading RC input.  This ensure we see the user's high throttle to indicate the user wants to perform the ESC calibration
2017-01-27 12:14:56 +09:00
Michael du Breuil 0fec4af54b Copter: Support the SYS_STATUS_SENSOR_BATTERY bit 2017-01-25 09:26:19 +09:00
Randy Mackay 26919b4ab6 Copter: send flight mode string to Notify 2017-01-23 15:07:20 -08:00
Randy Mackay af514eb101 Copter: remove some comments 2017-01-23 15:07:20 -08:00
Dmitry Prokhorov 3e993f955e ArduCopter: Support for OLED display by Alexey Kozin 2017-01-23 15:07:20 -08:00
Peter Barker 01b1916de5 Copter: ensure logging is working as part of prearm 2017-01-20 17:03:45 +09:00
Peter Barker e7d3219a58 Copter: check all channels have been configured, not just throttle 2017-01-20 13:02:53 +09:00
Peter Barker ab13b3beaf Copter: make rc checks verbose on failure 2017-01-20 13:02:53 +09:00
Peter Barker 078866046a Copter: correct rc-arming checks concerning trims
Trims should always be between min and max
2017-01-20 13:02:53 +09:00
Andrew Tridgell 332820aa88 Copter: fixed load of var_info for attitude_control and motors
we need to pass the var_info for the specific class we are using, not
the parent class.

Fixes issue #5585

thanks to Julien for noticing!
2017-01-20 12:05:09 +11:00
Randy Mackay cb1f7ba4bb Copter: remove setting position control's altitude max
AC_Avoid now takes responsibility for enforcing the alt limit and accesses inertial nav's limit directly
2017-01-18 09:35:47 +09:00
Randy Mackay 62a4867cd4 Copter: use avoidance adjusted climb rate in all modes 2017-01-18 09:35:47 +09:00
Randy Mackay b15d341850 Copter: add avoidance adjusted climb rate 2017-01-18 09:35:47 +09:00
Randy Mackay ebbfa9391d Copter: remove comments from package place 2017-01-18 09:35:47 +09:00
Peter Barker cc86011d20 Copter: use abs() on integers; Location alts are in integer cm 2017-01-17 09:41:37 -08:00
Peter Barker 96d73affae Copter: fix float warning; get_velocity_z() returns float 2017-01-17 09:41:37 -08:00
Leonard Hall 36b6218e31 Copter: integrate attitude control's set-throttle-mix-manual 2017-01-17 14:19:16 +09:00
Randy Mackay becc56da0b Copter: AP_Arming internal references start with underscore 2017-01-17 11:45:08 +09:00
Randy Mackay f476c706f6 Copter: add override to AP_Arming_Copter::pre_arm_checks 2017-01-17 11:45:08 +09:00
Randy Mackay cc217550c0 Copter: rename arming_checks to AP_Arming 2017-01-17 11:45:08 +09:00
Randy Mackay a52db9f29d Copter: fix motors_checks to AP_Arming 2017-01-17 11:45:08 +09:00