Commit Graph

27780 Commits

Author SHA1 Message Date
Gone4Dirt e5488e1869 AP_OSD: Add APM_BUILD_Heli 2021-09-29 19:55:48 +10:00
Gone4Dirt 0abfde0a7d AP_NavEKF3: Add APM_BUILD_Heli 2021-09-29 19:55:48 +10:00
Gone4Dirt 9090cb1271 AP_NavEKF2: Add APM_BUILD_Heli 2021-09-29 19:55:48 +10:00
Gone4Dirt 290794bf93 AP_InertialSensor: Add APM_BUILD_Heli 2021-09-29 19:55:48 +10:00
Gone4Dirt 79787d55cc AP_GyroFFT: Add APM_BUILD_Heli 2021-09-29 19:55:48 +10:00
Gone4Dirt 40f8407c1d AP_CANManager: Add APM_BUILD_Heli 2021-09-29 19:55:48 +10:00
Gone4Dirt a97cafbaad AP_BLHeli: Add APM_BUILD_Heli 2021-09-29 19:55:48 +10:00
Gone4Dirt 1d02ac768d AP_BattMonitor: Add APM_BUILD_Heli 2021-09-29 19:55:48 +10:00
Gone4Dirt 4421e4a842 AP_Arming: Add APM_BUILD_Heli 2021-09-29 19:55:48 +10:00
Gone4Dirt 94b97313be AP_AHRS: Add APM_BUILD_Heli 2021-09-29 19:55:48 +10:00
Gone4Dirt 765f6b69fa AC_Avoidance: Add APM_BUILD_Heli 2021-09-29 19:55:48 +10:00
Gone4Dirt 7c20658acf AP_Vehicle: Add Heli build type 2021-09-29 19:55:48 +10:00
Iampete1 b6de44cc7b AP_HAL_ChibiOS: CubeOrange: add alt config for telem1 RTS CTS as GPIO 2021-09-29 19:55:21 +10:00
Iampete1 8ae5bc5ad0 AP_HAL_ChibiOS: hwdef: allow GPIO alt config 2021-09-29 19:55:21 +10:00
Iampete1 a96150a528 AP_HAL_ChibiOS: allow enabling GPIO as alt config 2021-09-29 19:55:21 +10:00
Iampete1 dc45a113f9 AP_HAL_ChibiOS:UARTDriver: allow re-defintion of RTS and CTS pins 2021-09-29 19:55:21 +10:00
Iampete1 eeb5dd3c96 AP_SerialManger: always run set_options 2021-09-29 19:55:21 +10:00
Iampete1 0e0cc36f8f AP_BoardConfig: remove ALT_CONFIG param if no alt config is posible 2021-09-29 19:55:21 +10:00
bugobliterator 1a6179148b AP_IOMCU: ensure page_GPIO is aligned to 16bit 2021-09-29 19:08:10 +10:00
Peter Barker 8ce4a1fce7 AP_Camera: use AP_AHRS singleton to get current location and home 2021-09-29 18:33:01 +10:00
Andrew Tridgell e85594e423 HAL_ChibiOS: added KakuteH7 support 2021-09-29 18:11:04 +10:00
Andrew Tridgell d1d5cd5d9f HAL_ChibiOS: fix sdcard on SPI bus on H7
the spiIgnore() call was hanging on H7. The ChibiOS submodule change
fixes that, but this patch is also needed to ensure we timeout any
spiIgnore calls correctly
2021-09-29 18:11:04 +10:00
Andrew Tridgell 2c2c85c4d8 HAL_ChibiOS: fixed polled SPI 2021-09-29 18:11:04 +10:00
Andrew Tridgell 27e93155f4 HAL_ChibiOS: fixed build on boards with OTG2 and no CAN interfaces 2021-09-29 18:11:04 +10:00
Peter Barker d7ff072d26 SITL: remove mtk GPSs 2021-09-29 17:28:59 +10:00
Peter Barker 6bd2bc2179 AP_HAL_SITL: remove mtk GPSs
These are ancient and of very poor quality.
2021-09-29 17:28:59 +10:00
Peter Barker 068f91169c AP_GPS: remove mtk GPSs
These are ancient and of very poor quality.
2021-09-29 17:28:59 +10:00
Pierre Kancir c676d4772f AP_ONVIF: use correct #pragma GCC diagnostic pop 2021-09-29 17:27:29 +10:00
Pierre Kancir c12217eeb5 AP_HAL: use correct #pragma GCC diagnostic pop 2021-09-29 17:27:29 +10:00
Pierre Kancir cceaa1e2fc AP_Common: use correct #pragma GCC diagnostic pop 2021-09-29 17:27:29 +10:00
Iampete1 6aa8319b90 AP_Scripting: re-emmit error messages every 10 seconds if SCR_DEBUG_LVL > 0 2021-09-29 17:11:18 +10:00
Peter Barker 207f38dfaf AP_Filesystem: raise an internal error for fileop on main thread
#ecoefi.log
2021-09-29 15:50:52 +10:00
Tatsuya Yamaguchi 0b06d4072e AP_OSD: remove OSDn_BTEMP_* params when BARO_MAX_INSTANCES=1 2021-09-29 10:51:14 +10:00
Tatsuya Yamaguchi f249fe7eb2 AP_Hott_Telem: cope with BARO_MAX_INSTANCES = 1 2021-09-29 10:51:14 +10:00
Tatsuya Yamaguchi f3173174f3 SITL: cope with BARO_MAX_INSTANCES < 3 2021-09-29 10:51:14 +10:00
Josh Henderson 67eb6d17eb AP_NavEKF3: initialize stateStruct.quat to unit length 2021-09-28 19:09:16 +10:00
Josh Henderson 9a274ba565 AP_NavEKF2: initialize stateStruct.quat to unit length 2021-09-28 19:09:16 +10:00
Josh Henderson 9b74452270 AP_Math: add Internal_Error for quaternion of 0 length 2021-09-28 19:09:16 +10:00
Peter Barker 8d00152815 AC_AutoTune: stop specifying bit-widths for state
new: bin/arducopter  1670916  2544  194276  1867736
master: bin/arducopter  1671232  2544  194272  1868048

   new: bin/arduplane  1670692  2452  194364  1867508
master: bin/arduplane  1671012  2452  194364  1867828
2021-09-28 11:00:30 +10:00
Andrew Tridgell f148c3fc44 AP_Logger: fixed stuck logging with LOG_DISARMED=1
this prevents a stuck write closing logging when LOG_DISARMED=1
2021-09-28 10:47:48 +10:00
Peter Barker 143f23db89 AP_Logger: move SBP logging structures into AP_GPS 2021-09-28 10:45:51 +10:00
Peter Barker da66ecf1f2 AP_GPS: move SBP logging structures into AP_GPS 2021-09-28 10:45:51 +10:00
Dr.-Ing. Amilcar do Carmo Lucas 52c39bc382 GCS_MAVLink: add ESC_TELEMETRY_1_TO_4 to the mavlink_id_to_ap_message_id table 2021-09-28 10:01:16 +10:00
Shiv Tyagi 5f94986af1 GCS_Common : Mavlink wrap when battery percentage is above 100
When calculated battery percentage is above 100 we wrap it to INT8_MAX
2021-09-28 09:54:55 +10:00
Iampete1 3ae8dfead4 AP_Relay: update param description to inclde IOMCU 2021-09-28 09:40:25 +10:00
Iampete1 ade01f41d9 AP_HAL_ChibiOS: support digital write via IOMCU 2021-09-28 09:40:25 +10:00
Iampete1 ba58cb86db AP_IOMCU: support digital write 2021-09-28 09:40:25 +10:00
Iampete1 12d5fbbc86 AP_IOMCU: iofirmware: support digital write 2021-09-28 09:40:25 +10:00
Iampete1 69624b1c1b AP_BatteryMoniter: add plane Loiter to QLand failsafe action 2021-09-28 09:31:13 +10:00
Iampete1 d566b24c04 AP_Vehickle: add Loiter alt then QLAND mode reasons 2021-09-28 09:31:13 +10:00
Iampete1 407b70b82e AP_Common: location: add get alt distance method 2021-09-28 09:31:13 +10:00
Iampete1 3d566ca59b RC_Channel: add trim to current servo and RC option 2021-09-28 09:16:24 +10:00
Josh Henderson 4d7dddf337 SITL: sim_MS5611 fix simulated driver for 32bit usage 2021-09-28 09:15:11 +10:00
Josh Henderson 1019628ae4 SITL: test_ms5611 fix <-15C test case 2021-09-28 09:11:48 +10:00
Josh Henderson 9a7530ad50 AP_HAL_Linux: make panic() WEAK 2021-09-28 09:11:48 +10:00
Josh Henderson 328cf01436 AP_HAL_SITL: make panic() WEAK 2021-09-28 09:11:48 +10:00
Josh Henderson 0ae1536e4a AP_InternalError: change panic to return error code as string in SITL 2021-09-28 09:11:48 +10:00
Josh Henderson 6c3612b51d AP_Common: enable SITL unit testing
apcommon
2021-09-28 09:11:48 +10:00
Josh Henderson 0125ae26ac AP_Math: enable SITL unit testing 2021-09-28 09:11:48 +10:00
Peter Barker 1ae8385a0f AP_GPS: correct GPS switching when GPS blending disabled 2021-09-28 09:08:50 +10:00
Sebastian Quilter 69120fa1c7 AP_OSD: #if sidebars 2021-09-28 09:04:45 +10:00
Sebastian Quilter 9a58ccb3cd AP_OSD: sidebar support for remaining 4 fonts 2021-09-28 09:04:45 +10:00
Sebastian Quilter 2379036e9a AP_OSD: Add sidebars for MAX7456 2021-09-28 09:04:45 +10:00
Iampete1 b6a73dd3d0 RC_Channel: renstate ArmDisarm Discription with 4.1 note 2021-09-27 13:33:54 +01:00
Andrew Tridgell 4aa88d172c HAL_ChibiOS: adjust Swan-K1 parameters
limit down pitch to 15 degrees to prevent overspeed, and limit angular
rates to 100 deg/s
2021-09-27 21:21:53 +10:00
Andy Piper 20a91dc1c8 AP_SerialManager: correct docs for SERIAL8 2021-09-26 19:51:50 +01:00
Iampete1 25aedc4ee7 AP_Proximity: lower SF45B update rate 2021-09-26 20:26:20 +09:00
Peter Barker b0e59b2611 RC_Channel: rename GENERATOR_ENABLED to HAL_GENERATOR_ENABLED 2021-09-26 19:24:09 +10:00
Peter Barker 341379c5bd GCS_MAVLink: rename GENERATOR_ENABLED to HAL_GENERATOR_ENABLED 2021-09-26 19:24:09 +10:00
Peter Barker d86e2792fd AP_Vehicle: rename GENERATOR_ENABLED to HAL_GENERATOR_ENABLED 2021-09-26 19:24:09 +10:00
Peter Barker 43469955a9 AP_HAL_ChibiOS: rename GENERATOR_ENABLED to HAL_GENERATOR_ENABLED 2021-09-26 19:24:09 +10:00
Peter Barker 5433cbe9a5 AP_Generator: rename GENERATOR_ENABLED to HAL_GENERATOR_ENABLED 2021-09-26 19:24:09 +10:00
Peter Barker f71b4ec568 AP_BattMonitor: rename GENERATOR_ENABLED to HAL_GENERATOR_ENABLED 2021-09-26 19:24:09 +10:00
Peter Barker d9844cc75a AP_Arming: rename GENERATOR_ENABLED to HAL_GENERATOR_ENABLED 2021-09-26 19:24:09 +10:00
TunaLobster dd379af7cc AP_Scripting: Add Z logger format to example 2021-09-25 14:00:00 +01:00
Peter Barker 0d03cef48b AP_ADSB: tidy sending of SageTech RF mode
Saves 64 bytes on CubeBlack
2021-09-25 15:55:53 +10:00
Tom Pittenger de753f386c AP_Vehicle: fix periph-heavy compile errors when INS is disabled 2021-09-24 10:47:13 -05:00
Tom Pittenger fcfaab4beb AP_Frsky_Telem: fix periph-heavy compile errors with different things enabled 2021-09-24 10:47:13 -05:00
Tom Pittenger d45526ff42 AP_Compass: fix periph-heavy compile errors with different things enabled 2021-09-24 10:47:13 -05:00
Tom Pittenger 6ac1b7daf2 GCS_MAVLink: fix periph-heavy compile errors with different things enabled 2021-09-24 10:47:13 -05:00
Josh Henderson 27fa2e776d AP_HAL_ChibiOS: Hitec-Airspeed move from HAL_NO_GCS to HAL_GCS_ENABLED 2021-09-24 21:05:05 +10:00
Andrew Tridgell 6d093e56fb HAL_ChibiOS: added Nucleo-L496 AP_Periph target 2021-09-24 18:08:00 +10:00
Andrew Tridgell ca45fcbc70 AP_FlashStorage: support L496 MCUs 2021-09-24 18:08:00 +10:00
Andrew Tridgell 0212e23cd3 HAL_ChibiOS: added support for STM32L496 MCUs
good MCU for AP_Periph
2021-09-24 18:08:00 +10:00
lthall 31e7d672c9 AC_AttitudeControl: AC_PosControl: Update PSC logging to include desired 2021-09-23 20:07:52 +09:00
Leonard Hall 087a2b92c3 AP_Logger: Update PSC logging to include desired 2021-09-23 20:07:52 +09:00
Leonard Hall 77fbcf1741 AP_Math: Control: add expo calculation. 2021-09-23 20:03:53 +09:00
Paul Riseborough c828bdfbc9 AP_NavEKF3: Reduce output observer vertical velocity error when bad IMU 2021-09-23 18:55:28 +10:00
Paul Riseborough 8429c66860 AP_NavEKF3: Make subsequent bad IMU event detections faster 2021-09-23 18:55:28 +10:00
Paul Riseborough 458c67639d AP_NavEKF3: Force velocity state to follow GPS when IMU data is bad 2021-09-23 18:55:28 +10:00
Paul Riseborough c0d88e2673 AP_NavEKF3: Fix vertical velocity reset
Fixes bug that prevents the vertical velocity being reset to the GPS if the position aiding has already timed out and improves sensitivity of the bad IMU data check.
2021-09-23 18:55:28 +10:00
Paul Riseborough 17c2ba5ac1 AP_NavEKF3: Fix bug causing too frequent resets if bad IMU data detected 2021-09-23 18:55:28 +10:00
Peter Barker f0efc1300e AP_HAL_Linux: move defines of GPIO LOW/HIGH into cpp file
Insane having these generic defines happening if you include GPIO_BBB.h
2021-09-22 21:37:00 +10:00
Peter Barker 9c24916115 AP_HAL_SITL: move from HAL_NO_GCS to HAL_GCS_ENABLED 2021-09-22 21:37:00 +10:00
Peter Barker 275457fd2c AP_HAL_Linux: move from HAL_NO_GCS to HAL_GCS_ENABLED 2021-09-22 21:37:00 +10:00
Peter Barker 6ce79785b5 AP_OSD: move from HAL_NO_GCS to HAL_GCS_ENABLED 2021-09-22 21:37:00 +10:00
Peter Barker dac4134533 AP_InertialSensor: move from HAL_NO_GCS to HAL_GCS_ENABLED 2021-09-22 21:37:00 +10:00
Peter Barker df3cfe12a9 AP_VisualOdom: move from HAL_NO_GCS to HAL_GCS_ENABLED 2021-09-22 21:37:00 +10:00
Peter Barker 4b5525f53e SITL: move from HAL_NO_GCS to HAL_GCS_ENABLED 2021-09-22 21:37:00 +10:00
Peter Barker 224ff97f5c AP_Compass: move from HAL_NO_GCS to HAL_GCS_ENABLED 2021-09-22 21:37:00 +10:00
Peter Barker 9f6b9c7519 GCS_MAVLink: move from HAL_NO_GCS to HAL_GCS_ENABLED 2021-09-22 21:37:00 +10:00
Peter Barker d6e5f8398d AP_RTC: move from HAL_NO_GCS to HAL_GCS_ENABLED 2021-09-22 21:37:00 +10:00
Peter Barker 0305a79b7b AP_Param: move from HAL_NO_GCS to HAL_GCS_ENABLED 2021-09-22 21:37:00 +10:00
Peter Barker b66fd214f0 AP_NavEKF3: move from HAL_NO_GCS to HAL_GCS_ENABLED 2021-09-22 21:37:00 +10:00
Peter Barker 4aa6c212d2 AP_MSP: move from HAL_NO_GCS to HAL_GCS_ENABLED 2021-09-22 21:37:00 +10:00
Peter Barker fec9d4850d AP_Logger: move from HAL_NO_GCS to HAL_GCS_ENABLED 2021-09-22 21:37:00 +10:00
Peter Barker 1976b2b859 AP_HAL: move from HAL_NO_GCS to HAL_GCS_ENABLED 2021-09-22 21:37:00 +10:00
Peter Barker 1bd62362a4 AP_HAL_ChibiOS: move from HAL_NO_GCS to HAL_GCS_ENABLED 2021-09-22 21:37:00 +10:00
Peter Barker 6d615a3e16 AP_GPS: move from HAL_NO_GCS to HAL_GCS_ENABLED 2021-09-22 21:37:00 +10:00
Peter Barker df9de582e4 AP_DAL: move from HAL_NO_GCS to HAL_GCS_ENABLED 2021-09-22 21:37:00 +10:00
Peter Barker b18bdb80d6 AP_BattMonitor: move from HAL_NO_GCS to HAL_GCS_ENABLED 2021-09-22 21:37:00 +10:00
Peter Barker cf9a774bc2 AP_Baro: move from HAL_NO_GCS to HAL_GCS_ENABLED 2021-09-22 21:37:00 +10:00
Peter Barker 22e9ad4818 AP_Airspeed: move from HAL_NO_GCS to HAL_GCS_ENABLED 2021-09-22 21:37:00 +10:00
Peter Barker 8f6bed23cf AP_AccelCal: move from HAL_NO_GCS to HAL_GCS_ENABLED 2021-09-22 21:37:00 +10:00
bugobliterator b43c9961a3 AP_Param: disable format security 2021-09-22 21:36:34 +10:00
bugobliterator f3fef657f9 AP_GPS: handle failure to allocation of GPS CAN message subscribers 2021-09-22 21:36:34 +10:00
bugobliterator 0de393bf7f AP_BoardConfig: add allocation failure handling loop 2021-09-22 21:36:34 +10:00
Tatsuya Yamaguchi 1dcc5c3030 AP_BattMonitor: cope with AP_BATT_MONITOR_MAX_INSTANCES < 9 2021-09-22 18:58:12 +10:00
Iampete1 955be569a3 AP_Scripting: add forward flight motor shutdown applet 2021-09-22 18:16:32 +10:00
yaapu 6a459af624 AP_OSD: decrease blink frequency from 2Hz to 1Hz on MSP DisplayPort
Allows to actually see the blinking on hardware with a slow screen refresh rate
2021-09-22 18:06:12 +10:00
yaapu 9acfdaaa19 AP_OSD: added packed decimal support to MSP DisplayPort
This allows to take advantage of ArduPilot's compact decimal fonts
2021-09-22 18:06:12 +10:00
yaapu f33d6c4ec1 AP_MSP: fix rssi rounding issue 2021-09-22 17:09:50 +10:00
Pierre Kancir d853d16c42 AP_Math: fix vectorN ctor warning by using C++11 brace initilization in all cases 2021-09-21 20:51:37 +10:00
Paul Riseborough e9c339a0a0 AP_NavEKF3: fix wind speed covariance initialisation bug 2021-09-21 17:16:36 +10:00
Andrew Tridgell 758ce2699e HAL_ChibiOS: added Hitec-Airspeed hwdef 2021-09-21 13:51:40 +10:00
Andrew Tridgell 7f59366cc0 HAL_ChibiOS: process AIRSPEED lines in hwdef.dat 2021-09-21 13:51:40 +10:00
Andrew Tridgell f65620f4f3 AP_Airspeed: allow for an AIRSPEED list in hwdef.dat
this saves a lot of flash by only including specific drivers
2021-09-21 13:51:40 +10:00
Peter Barker f07d40a570 AP_Mission: fix infinite loop with nav commands that won't start
Discovered this when trying to run the standard CMAC mission on Sub
2021-09-21 13:42:01 +10:00
Shiv Tyagi a24a8c110b SRV_Channel : Improved should_e_stop method by using switch
This method earlier used >=, <= and == operators which is less maintainable. Hence, I replaced it by switch.

Co-Authored-By: Peter Barker <pb-gh@barker.dropbear.id.au>
2021-09-21 11:17:09 +10:00
Gone4Dirt 30589f9b29 AP_Generator: Make unhealthy driver message persist 2021-09-21 11:14:03 +10:00
Andy Piper e1fdab8423 AP_RCTelemetry: don't enter parameter mode while armed.
exit parameter mode quickly on ping
construct and respond to ping frames correctly
2021-09-21 10:41:58 +10:00
Iampete1 f541653502 SRV_Channel: fix override timeout without repeated calls 2021-09-21 10:24:04 +10:00
Iampete1 db6490818f AP_Button: update FUNx values 2021-09-21 09:36:24 +10:00
Iampete1 524ea39dfa RC_Channel: add convert_options function 2021-09-21 09:36:24 +10:00
Iampete1 c67705b02d RC_Channel: do_aux_function_armdisarm no longer needs to be virtual 2021-09-21 09:36:24 +10:00
Iampete1 39ca7dae1c RC_Channel: add two new ARMDISARM options and deprecate old 2021-09-21 09:36:24 +10:00
Josh Henderson 96cabfc423 SITL: add unit tests for SIM_MS5525 2021-09-21 09:30:58 +10:00
Josh Henderson 18a0632276 SITL: MS5XXX drivers use check_conversion_accuracy 2021-09-21 09:30:58 +10:00
Josh Henderson 2a2399c8f1 SITL: airspeed DLVR add atmosphere temperature model 2021-09-21 09:30:58 +10:00
Josh Henderson c454cea401 AP_Airspeed: fix MS5525 driver to allow copying driver to 64bit SITL 2021-09-21 09:30:58 +10:00
Josh Henderson 5e90649a6e SITL: fix MS5525 for temp <20C and negative pressures 2021-09-21 09:30:58 +10:00
Hwurzburg aa402d9a55 AP_Tuning: add options to prevent spamming tuning error messages 2021-09-21 07:56:19 +09:00
Hwurzburg 502aff27da AC_AttitudeControl: add options to prevent spamming tuning error messages 2021-09-21 07:56:19 +09:00
Iampete1 169375d14f RC_Channel: arming_check_throttle to virtual 2021-09-18 15:52:38 +01:00
Shiv Tyagi cdb4ec8ad0 Plane : Improved LAND_THEN_NEUTRL to work on all control surfaces
This fixes the issue #18593

Co-Authored-By: Peter Hall <33176108+IamPete1@users.noreply.github.com>
2021-09-17 22:06:24 -05:00
Michelle Rossouw c9a3b16aa7 SITL: Blimp SITL add initial dynamics 2021-09-18 08:26:23 +10:00
Andrew Tridgell f77e64ac83 HAL_SITL: Fixed default PWMs for blimp 2021-09-18 08:26:23 +10:00
Andrew Tridgell 5dcfa95444 GCS_Mavlink: allow setting of AHRS_TRIM_Z 2021-09-17 14:07:14 +10:00
Andrew Tridgell 3715ce6d1a AP_AHRS: allow setting of AHRS_TRIM_Z 2021-09-17 14:07:14 +10:00
Andrew Tridgell fd86cb0591 AP_Vehicle: moved accel cal update handling from vehicles 2021-09-17 14:07:14 +10:00
Andrew Tridgell fefade783b AP_InertialSensor: allow accelcal with a rotation 2021-09-17 14:07:14 +10:00
Andrew Tridgell 3f043dd933 AP_AHRS: added get_view_rotation() 2021-09-17 14:07:14 +10:00
Andrew Tridgell 63fcb804b3 AP_UAVCAN: added CAN_Dn_UC_OPTION parameter
this allows for 2 ways of controlling conflicts in the UAVCAN DNA
database. The first is to set CAN_Dn_UC_OPTION to 1, which resets the
DNA database, thus clearing any node conflicts.

The second is to set CAN_Dn_UC_OPTION to 2, which ignores node
conflicts in the DNA database

These options are useful for vehicles with UAVCAN smart batteries
where the node ID is fixed but the hwid changes and you want to do
battery swapping (possibly without rebooting)
2021-09-17 12:32:59 +10:00
Andrew Tridgell 17f8b0b11a AP_Param: disable debug code by default
found on EU dev call
2021-09-16 21:05:48 +10:00
Andrew Tridgell 119df09c44 SITL: cope with a socket error in FlightAxis
this fixes an issue that has arisen with the new threading approach
where RF would occasionally freeze
2021-09-16 14:31:10 +10:00
yaapu 94aba33d10 AP_OSD: added multi screen and stats support to DJI FPV OSD 2021-09-16 09:54:25 +10:00
yaapu 9f0d9a5652 AP_MSP: added multi screen and stats support to DJI FPV OSD 2021-09-16 09:54:25 +10:00
Iampete1 934a4e26c9 AR_Motors: re-work omni output to scale evenly at saturation 2021-09-16 08:48:47 +09:00
Iampete1 7ec7b478f0 AC_WPNav: add getter for wp_radius_cm 2021-09-15 20:36:56 +10:00
Iampete1 0a41cdaa24 SRV_Channel: add ignore reversed flag to set_trim_to_min_for 2021-09-15 18:59:07 +09:00
Iampete1 950dcf9242 AP_MotorsUGV: ignore servo reverse when setting trim for brushed with relay 2021-09-15 18:59:07 +09:00
Iampete1 85e57a3bd8 AP_Avoidance: correct ADSB vertical velocity conversion 2021-09-15 17:55:50 +10:00
Peter Barker 16c11fc4fa AP_Airspeed: allow zero offset if we are skipping calibration 2021-09-15 17:52:34 +10:00
Iampete1 bf695e4eeb AP_HAL_ChibiOS: atof to strtof 2021-09-15 17:36:12 +10:00
Iampete1 34f5b800b6 AP_Generator: atof to strtof 2021-09-15 17:36:12 +10:00
Iampete1 17e8ea0136 AP_RangeFinder_Params: update PIN discription 2021-09-15 17:31:54 +10:00
yaapu 53ea385291 AP_MSP: removed unnecessary pure virtual methods 2021-09-15 17:28:56 +10:00
yaapu e1b12fbee3 AP_MSP: use const structures and brace initialization where possible
saves ane extra 130bytes
2021-09-15 17:28:56 +10:00
yaapu 3bbf2c1f70 AP_MSP: removed unstructured writes to msp dst buffer 2021-09-15 17:28:56 +10:00
yaapu a2b83d675f AP_Scripting: added a frsky battery example 2021-09-15 17:21:41 +10:00
Peter Barker 305a8ad48a AP_Scripting: add and use HAL_QUADPLANE_ENABLED 2021-09-14 11:23:18 +10:00
Josh Henderson 7a3425faca AP_ADSB: sagetech use vector.xy().length() instead of norm(x,y) 2021-09-14 10:43:46 +10:00
Josh Henderson f534a315ea AP_Proximity: use vector.xy().length() instead of norm(x,y) 2021-09-14 10:43:46 +10:00
Josh Henderson 51023fc846 AP_NMEA_Output: use vector.xy().length() instead of norm(x,y) 2021-09-14 10:43:46 +10:00
Josh Henderson 3006d50f97 AP_NavEKF3: use vector.xy().length() instead of norm(x,y) 2021-09-14 10:43:46 +10:00
Josh Henderson d5f5a3024a AP_NavEKF2: use vector.xy().length() instead of norm(x,y) 2021-09-14 10:43:46 +10:00
Josh Henderson f76f86c207 AP_InertialNav: use vector.xy().length() instead of norm(x,y) 2021-09-14 10:43:46 +10:00
Josh Henderson 06251335da AP_GPS: use vector.xy().length() instead of norm(x,y) 2021-09-14 10:43:46 +10:00
Josh Henderson 38ead58df2 AP_AHRS: use vector.xy().length() instead of norm(x,y) 2021-09-14 10:43:46 +10:00
Josh Henderson 996b3b8b1e AC_Sprayer: use vector.xy().length() instead of norm(x,y) 2021-09-14 10:43:46 +10:00
Josh Henderson c0b18e4d52 AC_Avoid: use vector.xy().length() instead of norm(x,y) 2021-09-14 10:43:46 +10:00
Josh Henderson a3e475822b AC_AttitudeControl: use vector.xy().length() instead of norm(x,y) 2021-09-14 10:43:46 +10:00
Hwurzburg 6dfbd9ce31 AP_HAL_ChibiOS: add batt mon defaults to Kakutef4 Mini 2021-09-14 10:14:20 +10:00
Willian Galvani 68cbb47d68 HAL_Linux: RCOutput_PCA9685: implement force_safety_on/off 2021-09-14 10:11:17 +10:00
Willian Galvani 38e8020e4b HAL_Linux: try to stop PWMs before shutting down due to SIGTERM 2021-09-14 10:11:17 +10:00
Rhys Mainwaring 6cb4e6b31d SITL: update simpleRover C++ JSON interface example
- Provide a cmake file for cross platform builds
- Modify the example to respond to throttle commands on RC channel 3 (default for Rover)
- Add more detail to readme

Signed-off-by: Rhys Mainwaring <rhys.mainwaring@me.com>
2021-09-14 09:54:39 +10:00
Iampete1 d9e30452ed AP_Mission: only continue after land if next waypoint is a takeoff 2021-09-14 08:24:02 +09:00
Iampete1 3dca9b4534 AR_Motors: stop setting safety limit 2021-09-14 09:23:02 +10:00
Iampete1 2abe120969 SRV_Channel: remove set_safety_limit 2021-09-14 09:23:02 +10:00
Iampete1 cc03b2975c AP_IOMCU: iofirmware: remove saftey PWM 2021-09-14 09:23:02 +10:00
Iampete1 c1a2379504 AP_IOMCU: remove safe PWM 2021-09-14 09:23:02 +10:00
Iampete1 53ee7d861d AP_HAL_ChibiOS: remove safe PWM 2021-09-14 09:23:02 +10:00
Iampete1 ed80d91d55 AP_HAL: remove set_safety_pwm 2021-09-14 09:23:02 +10:00
Willian Galvani fe72640955 AP_HAL: remove BATT_ settings, they belong in AP_BattMonitor_Analog.h 2021-09-14 09:21:42 +10:00
Willian Galvani 08b33954db AP_BattMonitor_Analog: add default PM definitions for the Navigator Board 2021-09-14 09:21:42 +10:00
Willian Galvani 2e5b689196 AP_BattMonitor_Analog: allow per-board setting of CURR_AMP_OFFSET 2021-09-14 09:21:42 +10:00
Andrew Tridgell 88d77d0acd HAL_ChibiOS: change f303-PWM timers
fixes PWM on channels 3 and 4
2021-09-13 21:29:13 +10:00
Andrew Tridgell adbaccaa08 HAL_ChibiOS: fixed RTSCTS flow control issue
this fixes an issue reported on MatekH743, but also applies to other
boards. When not using DMA if there have been bytes written before the
auto flow control detection was enabled then these must be cleared
from _total_written so the flow control detection can work correctly
2021-09-13 21:28:08 +10:00
Iampete1 bc216b103c AP_Mission: remove support for MAV_CMD_DO_SET_MODE 2021-09-13 16:18:24 +10:00
Iampete1 01cbb897e3 AP_Mission: add missing strings 2021-09-13 16:18:24 +10:00
Iampete1 1a2ea893b6 AP_MotorsMatrix: correct octo I testing order 2021-09-13 13:39:03 +09:00
Iampete1 8c37d08379 SITL: Examples: SilentWings: remove AUTO_FBW_STEER 2021-09-12 22:12:32 -05:00
Iampete1 66e1baa94c AP_IRLock_I2C: add comment on calibration equation 2021-09-13 10:56:00 +09:00
Andrew Tridgell d62346f8d0 SITL: use a thread to create sockets for RealFlight
this reduces the cost of the socket creation on each frame, resulting
in higher frame rates. Typical improvement is around 30%
2021-09-13 10:38:48 +10:00
Iampete1 febf843e6d AC_Loiter: protect against negative angle max 2021-09-13 07:55:34 +09:00
Iampete1 ffac134014 AC_PosControl: protect against negative angle max 2021-09-13 07:55:34 +09:00
mateksys 659286ee4f ChibiOS: add icm42605 as substitution for icm20602 2021-09-11 17:37:12 +10:00
murata 731fd7221f AP_Scripting: Only use messages that are useful for debugging 2021-09-10 20:46:33 +10:00
Randy Mackay 570c12215d AR_AttitudeControl: fix get_throttle_out_speed use of passed in limits 2021-09-10 07:50:00 +09:00
Mohammad Hefny 61a7387dd9 AP_Notify: link to notify module 2021-09-10 08:17:37 +10:00
Mohammad Hefny bd099b3910 AP_Batt: link to battery monitor 2021-09-10 08:17:37 +10:00
Mohammad Hefny 5eb28be8e6 AP_HAL_Linux: define board features on Linux module 2021-09-10 08:17:37 +10:00
Mohammad Hefny 2cb13dcc7d AP_HAL: define board features 2021-09-10 08:17:37 +10:00
Iampete1 999c26926a SITL: examples: SilentWings: remove ALT_CTRL_ALG 2021-09-09 11:07:07 +01:00
Leonard Hall 8c51271b45 AC_WPNav: Add units to the AC_AttitudeControl Library 2021-09-09 08:01:14 +09:00
Leonard Hall 90b5bc6a2d AC_AutoTune: Add units to the AC_AttitudeControl Library 2021-09-09 08:01:14 +09:00
Leonard Hall ad278779e3 AC_AttitudeControl: : Add units to the accessors. 2021-09-09 08:01:14 +09:00
Leonard Hall 7852e9d1b0 AC_WPNav: Fix calculation of _scurve_jerk_time using radians. 2021-09-09 08:01:14 +09:00
Peter Barker 8a3a787b76 AC_WPNav: honour changes to wp-speed-up and wp-speed-down in-flight 2021-09-08 21:29:38 +10:00
Iampete1 f80fedff9c AP_Logger: add function to set longer log persist 2021-09-08 18:26:40 +10:00
Iampete1 1e5b9e487b AP_Arming: set force disarmed logging for all the nasty disarm reasons 2021-09-08 18:26:40 +10:00
Peter Barker 380d962648 AP_Motors: do not use int version to define motors 2021-09-08 18:20:44 +10:00
Peter Barker dbb43a5746 AP_Motors: remove motor_num from motor definition structures
Every structure simply used the defines in sequence, meaning 0, 1, 2, 3
etc.  Handily we have a loop counter where we use these structures...
2021-09-08 18:20:44 +10:00
Peter Barker a152ad70a9 AP_Motors: use structures to save flash when initialising motors (raw motors) 2021-09-08 18:20:44 +10:00
Peter Barker 26385009ca AP_Motors: use structures to save flash when initialising motors 2021-09-08 18:20:44 +10:00
Iampete1 529a3a9122 AP_HAL_ChibiOS: convert back to full range on IOMCU ONESHOT125 read 2021-09-08 18:01:50 +10:00
Iampete1 1f7023b580 RC_Channel: add SIMPLE_HEADING_RESET option 2021-09-08 16:49:33 +09:00
Iampete1 7ada4a0d5a AP_Arming: logger: fail check if downloading logs 2021-09-08 17:38:48 +10:00
Iampete1 a47eeb3fed AP_Logger: log transfer: add error message if armed 2021-09-08 17:38:48 +10:00
Willian Galvani 1057161f88 AP_BattMonitor_logging: update to use capacity_remaining_pct() as a bool 2021-09-08 17:17:41 +10:00
Willian Galvani 467554ee0e AP_Frsky_Telem: update to use capacity_remaining_pct() as a bool 2021-09-08 17:17:41 +10:00
Willian Galvani 9206599e6c AP_BattMonitor_UAVCAN: update to use capacity_remaining_pct() as a bool 2021-09-08 17:17:41 +10:00
Willian Galvani e563919dd2 AP_Scripting: update to use capacity_remaining_pct() as a bool 2021-09-08 17:17:41 +10:00
Willian Galvani c08e04a16a AP_RCTelemetry: update to use capacity_remaining_pct() as a bool 2021-09-08 17:17:41 +10:00
Willian Galvani 018ff3d11c GCS_MAVLink: update to use capacity_remaining_pct() as a bool 2021-09-08 17:17:41 +10:00
Willian Galvani f7fa4b7c19 AP_OSD: update to use capacity_remaining_pct() as a bool 2021-09-08 17:17:41 +10:00
Willian Galvani b9452c83be AP_Notify: update to use capacity_remaining_pct() as a bool 2021-09-08 17:17:41 +10:00
Willian Galvani 207723319b AP_BattMonitor_Backend: change capacity_remaining_pct() to a bool 2021-09-08 17:17:41 +10:00
Willian Galvani 735e2ab651 AP_BattMonitor: change capacity_remaining_pct() to a bool 2021-09-08 17:17:41 +10:00
Andy Piper e705f78b5e AP_HAL_ChibiOS: correct and compact Pixhawk4-bdshot build 2021-09-08 17:09:49 +10:00
Andy Piper c92c75c9a6 AP_HAL_ChibiOS: bdshot version of CUAVv5 2021-09-08 17:09:49 +10:00
Andy Piper bb41db8478 AP_HAL_ChibiOS: bdshot version of CUAVv5Nano 2021-09-08 17:09:49 +10:00
Andrew Tridgell d29057a158 HAL_ChibiOS: added f303-PWM
for a PWM output node based on mRo f303 CAN node
2021-09-08 17:06:44 +10:00
Peter Barker dabba69b5e AP_NavEKF3: improve description of XKF4/NKF4 fields
Courtesy Paul Riseborough here: https://github.com/ArduPilot/ardupilot_wiki/issues/3641#issuecomment-913577132
2021-09-08 17:06:12 +10:00
Peter Barker a62cb64867 AP_NavEKF2: improve description of XKF4/NKF4 fields
Courtesy Paul Riseborough here: https://github.com/ArduPilot/ardupilot_wiki/issues/3641#issuecomment-913577132
2021-09-08 17:06:12 +10:00
Peter Barker abe78e168d SITL: make heli-blade simulation work 2021-09-08 14:33:19 +10:00
Peter Barker ae40531cd7 AP_HAL_SITL: make heli-blade simulation work 2021-09-08 14:33:19 +10:00
Bill Geyer 9a917abf76 SITL: update conventional heli dynamics and add blade 360 heli dynamics 2021-09-08 14:33:19 +10:00
Leonard Hall 35a93c5988 AC_AttitudeControl: AC_PosControl: Change set_correction_speed_accel_z to use input arguments 2021-09-07 19:04:14 +09:00
Andrew Tridgell 9342ded2bb AC_WPNav: cope with negative WPNAV_SPEED_DN
a user set WPNAV_SPEED_DN to a negative value, with odd results. Take
absolute value to cope. Even though the param docs clearly say range
should be positive, it is one where it is easy to think it should be
negative
2021-09-07 18:55:00 +09:00
Peter Barker fd144ccc59 GCS_MAVLink: log source sysid/compid in MAVC
For field length purposed had tor remove Current and autocontinue which we don't care about
anyway.
2021-09-07 11:06:08 +10:00
Peter Barker 13a7b60279 AP_Logger: log source sysid/compid in MAVC
For field length purposed had tor remove Current and autocontinue which we don't care about
anyway.
2021-09-07 11:06:08 +10:00
Peter Barker ec53a41ffd AC_WPNav: monitor WPNAV_SPEED for changes 2021-09-07 10:04:07 +09:00
Andrew Tridgell 2e4766fe54 HAL_ChibiOS: ensure HI_POWER periph is on 2021-09-07 10:40:44 +10:00
Andrew Tridgell 532396e5e6 REVERT: HAL_ChibiOS: Rename STM32F412 hw definition file
This reverts commit 5de6c690d8.

That commit broke the build for the affected board as the chibios
headers rely on the name of the file matching a ifdef
2021-09-07 10:37:43 +10:00
Andrew Tridgell 8366a1622c AP_OSD: hide disabled parameters in OSD var_info2 2021-09-07 10:36:16 +10:00
Andrew Tridgell 10cbd3fd80 AP_Param: added a flag for hidden parameters 2021-09-07 10:36:16 +10:00
Iampete1 ccd330a40a AP_Vehicle: add AUTO_RTL_EXIT mode reason 2021-09-07 09:35:35 +09:00
Josh Henderson a91c0f4b12 AC_WPNav: simplify get_wp_destination_loc 2021-09-07 08:02:18 +09:00
Andrew Tridgell b77580f934 HAL_ChibiOS: avoid an issue with DCache init on H743
this fixes an issue found by Andy Piper where the H743 bootloader gets
a hard fault in the DCache enable code when SRAM1 is primary memory.

This is the simplest fix I could think of, and avoids the problem by
making DTCM the first segment in the bootloader.

Note that we can't use DTCM as first segment for main firmware since
we went to double precision EKF as the static variables don't fit
2021-09-06 18:23:03 +10:00
Randy Mackay 8a5ade1f46 AC_WPNav: protect against divide-by-zero 2021-09-06 16:02:25 +09:00
Randy Mackay 28a14b3602 AC_WPNav: move definitions to .cpp file 2021-09-06 16:02:25 +09:00
Randy Mackay af9a91c853 Copter: terrain spelling fix 2021-09-06 16:02:25 +09:00
Randy Mackay ba50f68390 AC_WPNav: terrain spelling fix 2021-09-06 16:02:25 +09:00
Leonard Hall 5337ab0551 AC_AttitudeControl: AC_PosControl: Remove const float 2021-09-06 16:00:19 +09:00
Leonard Hall 94002101fd AC_WPNav: Separate landing and terrain following. 2021-09-06 16:00:19 +09:00
Leonard Hall 30cda045f1 AC_Autotune: Separate landing and terrain following. 2021-09-06 16:00:19 +09:00
Leonard Hall 0fff010046 AC_AttitudeControl: AC_PosControl: Separate landing and terrain following. 2021-09-06 16:00:19 +09:00
Hwurzburg d0b67baefd AP_HAL_ChibOS: add pin defs for RSSI to KakuteF7 2021-09-06 10:12:48 +10:00
Hwurzburg 854697f870 AP_HAL_ChibiOS: update default params for SWAN-K1 2021-09-06 08:07:06 +10:00
Pierre Kancir 2b44f86f9c AP_HAL: fix ringbuffer test on clang.
../../libraries/AP_HAL/utility/tests/test_ringbuffer.cpp:46:17: fatal error: variable-sized object may not be initialized
    uint8_t buf[strlen(str)+5] {};
2021-09-04 15:46:47 +10:00
Andrew Tridgell 8462ce4e2e HAL_ChibiOS: fixed GPIO lines for QioTekZealotF427 2021-09-03 18:16:43 +10:00
Andrew Tridgell a76323aaca AP_DAL: fixed a bug in RMGH logging 2021-09-03 18:16:08 +10:00
Andrew Tridgell eacdd017d7 AP_Declination: added a test suite for AP_Declination
use test vectors from MAVProxy mavextra
2021-09-03 14:45:17 +10:00
Andrew Tridgell 71c5c624ce AP_Declination: fixed rounding in mag field
thanks to Angela for noticing this
2021-09-03 14:45:17 +10:00
Peter Barker 7a06c941df AP_Vehicle: make bad-mode-number notification consistent across vehicles 2021-09-01 19:45:46 +09:00
Peter Barker a292fe13d6 GCS_MAVLink: add option to create internal error via preflight-reboot
useful for testing our handling of internal errors
2021-09-01 18:58:15 +10:00
olliw42 af634f0421 AP_Mount: initialize backends after all mounts were added 2021-09-01 18:57:24 +10:00
Iampete1 e82860266d SRV_Channel: call update_aux_servo_function in function_assigned 2021-09-01 18:34:45 +10:00
Peter Barker 129eb4c184 AP_HAL_SITL: do not overwrite FETTecESC telemetry data w/SITL ESC data 2021-09-01 18:25:51 +10:00
Andrew Tridgell ae615de4ce GCS_MAVLink: added logging of NAMED_VALUE_FLOAT
this is useful when running sensors on a companion computer and
wanting values logged in main ArduPilot log.
2021-09-01 17:52:48 +10:00
Iampete1 8d669f7616 AP_Arming: update primary GPS type 0 string 2021-09-01 17:51:31 +10:00
Iampete1 0d3c00cb96 AP_Rangefinder: MAVLink: accept data only from configured orentation 2021-09-01 17:50:58 +10:00
Andy Piper e8d1326a6d AP_ESC_Telem: fix raw rpm
Co-authored-by: Amilcar Lucas <amilcar.lucas@iav.de>
2021-09-01 17:15:32 +10:00
Andy Piper 9281982b8f AP_ESC_Telem: log raw RPM information 2021-09-01 17:15:32 +10:00
bugobliterator 4ecdf90470 AP_HAL_ChibiOS: add internal flash version of hwdef for H757I_EVAL 2021-09-01 17:10:53 +10:00
Siddharth Purohit d484477a99 AP_HAL_ChibiOS: move to using PLL2_R_CK for QSPI 2021-09-01 17:10:53 +10:00
Siddharth Purohit 81dc237a19 AP_HAL_ChibiOS: move to using Instruction RAM with External Flash setup 2021-09-01 17:10:53 +10:00
Siddharth Purohit 1eb318c62b AP_HAL_ChibiOS: increase clock frequency for QSPI 2021-09-01 17:10:53 +10:00
Siddharth Purohit 215c1249cb AP_HAL_Empty: add check owner method 2021-09-01 17:10:53 +10:00
Siddharth Purohit 39bd229279 AP_HAL_ChibiOS: remove dependency on Semaphores in QSPIDevice in BL 2021-09-01 17:10:53 +10:00
Siddharth Purohit 813e93a69c AP_HAL_ChibiOS: do not reset GPIO for boards with external flash 2021-09-01 17:10:53 +10:00
Siddharth Purohit 4ba2835de1 AP_HAL_ChibiOS: add config for supporting load from external flash 2021-09-01 17:10:53 +10:00
Siddharth Purohit faedb12493 AP_HAL_ChibiOS: fix hwdef generation for bootloader supporting ext flash 2021-09-01 17:10:53 +10:00
Siddharth Purohit 6e81fcbed1 AP_HAL_ChibiOS: add support for things required to run QSPIDriver 2021-09-01 17:10:53 +10:00
Siddharth Purohit a039711628 AP_HAL_ChibiOS: prepare H757I_EVAL for external flash programming 2021-09-01 17:10:53 +10:00
Siddharth Purohit 32f91c4cb2 AP_FlashIface: add jedec test using bootloader config 2021-09-01 17:10:53 +10:00
Andrew Tridgell fdfa14c4c0 HAL_ChibiOS: adjust Swan-K1 tuning 2021-09-01 14:04:35 +10:00
Andrew Tridgell f4ad8f6ef5 HAL_ChibiOS: fix for HAL_PWM_COUNT zero
reported by Mallikarjun
2021-09-01 13:05:20 +10:00
Peter Barker 5f980929d9 AP_Motors: use add_motors to save flash 2021-08-31 20:23:58 +10:00
nkruzan 0a236bc13d AP_Vehicle: log internal error and report bitmask to GCS
AP_Vehicle.cpp: cast parameter bitmask as (unsigned) per Peter B.

rework per Peter B.

Co-authored-by: Peter Barker <pb-gh@barker.dropbear.id.au>
remove unnecessary send_internal_error_statustext function

remove Write_InternalError function
2021-08-31 15:54:02 +10:00
Peter Barker 2be49cb42b AP_Airspeed: fix examples for AP_AHRS_DCM becoming backend 2021-08-31 14:28:53 +10:00
Peter Barker 875b6331a4 AP_Compass: fix examples for AP_AHRS_DCM becoming backend 2021-08-31 14:28:53 +10:00
Peter Barker acc595ff57 AP_Mission: fix examples for AP_AHRS_DCM becoming backend 2021-08-31 14:28:53 +10:00
Peter Barker 522c05fcc9 AP_Module: fix examples for AP_AHRS_DCM becoming backend 2021-08-31 14:28:53 +10:00
Peter Barker 29d2eed9e4 Sub: view update does not take skip_ins_update 2021-08-31 14:28:53 +10:00
Peter Barker 9dbd9d1e06 AP_AHRS: call INS update in AP_AHRS::update w/o holding data sem
We shouldn't be holding the data semaphore while waiting for the samples
- lots of things might be unnecessarily blocked

DCM's update function doesn't need to take the semaphore as it is
already taken by AP_AHRS
2021-08-31 14:28:53 +10:00
TunaLobster c20914c0c6 SITL: Add C++ library for JSON interface
Includes examples for a 1-D rover, minimum, and a copy of Socket as SocketExample.
2021-08-31 14:28:03 +10:00
Iampete1 970d0ea2a3 AP_BoardConfig: make sure heater is left off if disabled 2021-08-31 10:32:25 +10:00
Josh Henderson b1028035bc AP_UAVCAN: cleanup comments in BatteryInfoAux dsdl message 2021-08-31 10:30:28 +10:00
Andrew Tridgell 584fb7cd7b HAL_ChibiOS: use more USB buffers on higher end F7 chips 2021-08-31 10:12:00 +10:00
Andrew Tridgell 4fdc1ebc30 AP_InertialSensor: fixed locking issue in delta accumulation
this fixes a bug in calculating delta velocity and delta acceleration
between threads.
2021-08-31 10:10:18 +10:00
Iampete1 e28650c8bd RC_Channel: remove recompute_pwm_no_deadzone 2021-08-31 09:48:59 +10:00
Peter Barker 3a5062c90b AP_NMEA_Output: eliminate AP::ahrs().get_location 2021-08-31 09:47:31 +10:00
Peter Barker cc514af158 AP_AHRS: eliminate AP::ahrs().get_location 2021-08-31 09:47:31 +10:00
Andrew Tridgell a412795045 AP_Terrain: make TERRAIN_MARGIN a float
it turns out very large margins are needed for some locations
2021-08-31 09:25:36 +10:00
Randy Mackay e5bde1a085 AP_VisualOdom: use AP_AHRS::using_extnav_for_yaw to protect against aligning to oneself 2021-08-31 09:20:17 +10:00
Randy Mackay 1c08866342 AP_AHRS: add using_extnav_for_yaw 2021-08-31 09:20:17 +10:00
Randy Mackay 63e579d738 AP_NavEKF3: add using_extnav_for_yaw 2021-08-31 09:20:17 +10:00
Randy Mackay b984f1370c AP_VisualOdom: integrate rename to using_noncompass_for_yaw 2021-08-31 09:20:17 +10:00
Randy Mackay e7be608a4a AP_AHRS: rename is_ext_nav_used_for_yaw to using_noncompass_for_yaw 2021-08-31 09:20:17 +10:00
Randy Mackay 0edfd2634f AP_NavEKF3: rename using_external_yaw to using_noncompass_for_yaw 2021-08-31 09:20:17 +10:00
Iampete1 ce56bfe786 AP_Arming: check status and health of all GPS 2021-08-31 09:13:57 +10:00
Peter Barker de9f8a9320 AP_Logger: specify frames on PSC fields 2021-08-31 09:09:02 +10:00
Andy Piper 8035b92e6e AP_RCProtocol: increase CRSF frame timeout to account for scheduling delays 2021-08-31 08:18:32 +10:00
Andrew Tridgell 39f44147b8 HAL_ChibiOS: reduce the impact of UART DMA contention
this changes the heuristics for UART TX DMA allocation to greatly
reduce the chances of DMA contention causing long delays on other
devices

This fixes issues with FETTec driver output and gimbal status messages
as reported by Amilcar and OlliW. The problem is particularly bad when
no GPS is connected to GPS1 on fmuv3 and derived boards (such as
CubeBlack)

key changes:

 - remember the contention_counter across begin() calls, as the GPS
   calls begin with new baudrates regularly

 - added a is_shared() API to Shared_DMA, allowing the UART driver to
   avoid TX DMA on shared streams when at low baudrates.
2021-08-31 07:55:27 +10:00
Andrew Tridgell dc252aa8f5 GCS_MAVLink: check for null comm_port before writing
this was found when adding debug code to write to a specific channel
2021-08-31 07:55:27 +10:00
Rishabh ee176d26e9 AC_PrecLand: Raise internal error if state machine is running while precland is disabled 2021-08-30 14:08:44 +09:00
Iampete1 7d536666b4 SITL: SIM_Sailboat: remove use of AHRS 2021-08-30 13:40:37 +10:00
Marek Łukasiewicz 5de6c690d8 HAL_ChibiOS: Rename STM32F412 hw definition file 2021-08-30 10:27:45 +10:00
Pierre Kancir 60155a7fec Filter: add more unittests 2021-08-30 09:51:25 +10:00
Pierre Kancir fd38be843a Filter: finish modefilter test 2021-08-30 09:51:25 +10:00
Peter Barker 0792caab83 AP_AHRS: factor out an update_notify_from_filter_status 2021-08-28 23:11:09 +10:00
Peter Barker ca6d214bb3 AP_AHRS: remove unused getGpsGlitchStatus method 2021-08-28 19:46:13 +10:00
Iampete1 6628fd2837 SITL: swap rotation direciton of motor 2 for lower yaw offset 2021-08-28 10:32:59 +09:00
Teo 4988f72ee2 RC_Channel: removed dead code 2021-08-28 10:29:06 +09:00
bugobliterator fd95c32d88 AP_HAL_ChibiOS: add CubeOrange Periph Heavy build 2021-08-27 09:17:30 -07:00
Pierre Kancir cc39eafe02 AP_GyroFFT: ensure we got float division when there are needed instead of integer divisions 2021-08-27 13:42:03 +10:00
Pierre Kancir 23a67a9e60 AP_GyroFFT: checking that uint16_t is negative is useless 2021-08-27 13:42:03 +10:00
Pierre Kancir 39fd32aa9e AP_GyroFFT: reduce first_harmonic scope 2021-08-27 13:42:03 +10:00
Andrew Tridgell 858a6b7e87 HAL_ChibiOS: allow FlywooF745 to build again 2021-08-27 07:45:58 +10:00
Pierre Kancir bcfb07b39f AP_Rangefinder: fix override in constructor 2021-08-26 21:48:19 +10:00
Randy Mackay b524094216 AP_NavEKF2: init rngOnGnd to 5cm to avoid div-by-zero 2021-08-26 12:23:32 +09:00
Leonard Hall ff58054d1b AC_AttitudeControl: AC_PosControl: Clean up to use .xy() 2021-08-26 12:22:52 +09:00
Leonard Hall 8223d664a7 AC_AttitudeControl: AC_PosControl: Non functional clean up 2021-08-26 12:22:52 +09:00
Leonard Hall 520883b504 AC_WPNav: Fix Jerk units 2021-08-26 12:22:52 +09:00
Leonard Hall 9c097dd6be AC_AttitudeControl: AC_PosControl: limit initial acceleration 2021-08-26 12:22:52 +09:00
Leonard Hall 445e52b821 AC_AttitudeControl: AC_PosControl: fix stopping point initialization 2021-08-26 12:22:52 +09:00
Randy Mackay b396169084 AP_Scripting: copter-fast-descent.lua example script 2021-08-26 11:25:54 +09:00
Randy Mackay 1a7826295f AP_Vehicle: add virtual set_target methods 2021-08-26 11:25:54 +09:00