Commit Graph

1814 Commits

Author SHA1 Message Date
Andrew Tridgell 57273b41b4 autotest: removed 2560 build for copter 2015-03-13 22:58:21 +11:00
Andrew Tridgell ac4b52a31c Build: removed HIL builds
now use HIL_MODE=1
2015-03-13 22:54:55 +11:00
Andrew Tridgell 3c9af9e474 autotest: fixed hil mode start for sim_vehicle 2015-03-13 22:52:55 +11:00
Andrew Tridgell 95a1ab0cab Replay: fixed build with new AP_Compass API 2015-03-13 18:46:16 +11:00
Vic 6467e5b3ee VARTest: Update VARTest to backend 2015-03-13 18:46:15 +11:00
Randy Mackay 774332ea02 Replay: fixup after inertial nav and baro glitch removal 2015-03-13 16:41:08 +09:00
Andrew Tridgell 472a50f9c2 Build: removed APM2 build for copter
no longer supported
2015-03-13 11:36:54 +11:00
Andrew Tridgell 0b261e8695 Travis: used sudo with pip 2015-03-13 10:54:59 +11:00
Andrew Tridgell de2c22b4b9 Travis: try to upgrade to g++ 4.8 2015-03-13 10:51:31 +11:00
Andrew Tridgell 2e6d79f449 Travis: disable droneapi and upgrade pip 2015-03-12 17:28:04 +11:00
Andrew Tridgell 67e10ff392 Travis: ignore failure of extra deb install 2015-03-12 17:28:04 +11:00
Andrew Tridgell d44fff71cf autotest: disable ARMING_REQUIRE in autotest 2015-03-12 12:55:08 +11:00
Andrew Tridgell c42a40553a Travis: install some extra packages for AVR 2015-03-12 12:50:30 +11:00
Andrew Tridgell 08d0ac37a3 autotest: need accel offsets for 2 IMUs now 2015-03-12 12:50:30 +11:00
Andrew Chapman e90f5375d0 added octa-quad target for SITL, fixed octa motor order 2015-03-11 21:38:25 +09:00
Robert Lefebvre 45a12646be SITL: Initial improvements to tradheli simulation 2015-03-11 21:07:02 +09:00
Andrew Tridgell 3ca4142c91 SITL: added tradheli support
start with:

  sim_vehicle.sh -f heli --console --map
2015-02-24 16:16:05 +11:00
Andrew Tridgell dd5be8837a autotest: raise timeout 2015-02-19 21:49:43 +11:00
Andrew Tridgell cd2898b149 autotest: removed old table of contents link in generated paramater docs 2015-02-19 15:58:30 +11:00
Andrew Tridgell 0b3118b3c4 Travis: more packages for new PX4 build 2015-02-14 12:31:49 +11:00
Andrew Tridgell 801c4d0a93 Build: disable board specific build tags
disable this until we work out why apm1/apm2 tags have re-appeared
2015-02-12 06:21:03 +11:00
Andrew Tridgell f69622f041 Travis: cope with setuptools upgrade failing 2015-02-11 21:18:35 +11:00
Jonathan Challinger c2d60ed7a8 Replay: use hal.util soft_armed state 2015-02-11 20:57:27 +11:00
Jonathan Challinger 5059fc620c Build: add git hashes to .px4 files 2015-02-11 20:22:08 +11:00
Randy Mackay 82df53ed80 CPUInfo: fix compile error 2015-02-09 22:26:51 +09:00
Andrew Tridgell a118ac69c6 Travis: use separate pip commands to find travis issue 2015-02-08 22:11:57 +11:00
Andrew Tridgell 97d6543520 Travis: added install-travis-env.sh
this will be used for travis test builds, to avoid some issues with
pip install using the generic script
2015-02-08 21:59:58 +11:00
Randy Mackay ae487ca88b AutoTest: remove calibrate level from copter tests 2015-02-03 14:29:11 +09:00
Andrew Tridgell 579048803c autotest: removed PX4IO firmware link 2015-02-03 09:51:42 +11:00
Paul Riseborough fe0c434d2b Simulator: Gimbal debug output changes 2015-02-03 09:49:17 +11:00
Paul Riseborough 84029f8f7c Simulator: Bypass angle limiting to allow debugging 2015-02-03 09:49:17 +11:00
Andrew Tridgell 9bdefd0bba autotest: updates for new GIMBAL_REPORT format 2015-02-03 09:49:16 +11:00
Andrew Tridgell 734cc61838 Replay: fixed build 2015-02-03 09:49:15 +11:00
Andrew Tridgell c58397020a autotest: send targeted GIMBAL_REPORT messages 2015-02-03 09:49:15 +11:00
Andrew Tridgell 28cf93d300 autotest: added maths for correct gimbal joint limits
This adds (more) correct join rate limiting based on Pauls maths. It
avoids the coupling of the axes inherent in the last implementation

Pair-Programmed-With: Paul Riseborough <p_riseborough@live.com.au>
2015-02-03 09:49:14 +11:00
Andrew Tridgell f63eb870cf autotest: change euler312 ordering conventions 2015-02-03 09:49:14 +11:00
Andrew Tridgell 791dfbff7e autotest: added mavlink gimbal simulation in copter SITL
Pair-Programmed-With: Paul Riseborough <p_riseborough@live.com.au>
2015-02-03 09:49:13 +11:00
Andrew Tridgell edad8da613 pysim: added euler312 conversions 2015-02-03 09:49:13 +11:00
Randy Mackay f225558dbd IRIS params: update RATE_PIT_IMAX to 1000 2015-02-02 17:59:52 +09:00
LukeMike a665037176 TOOLS: changed script for building single project 2015-02-02 08:44:01 +11:00
LukeMike 903f5d2211 TOOLS: changed permissions of scripts for building 2015-02-02 08:44:00 +11:00
Emile Castelnuovo 7795cb6929 Tools: update scripts to build all firmwares for all VR boards 2015-02-02 08:43:58 +11:00
LukeMike 2522709a78 Tools: added script to build all VirtualRobotix binaries 2015-02-02 08:43:57 +11:00
Randy Mackay 18af7c1437 Replay: fix compile error for Serial Manager 2015-01-29 14:05:16 +11:00
Randy Mackay 4de0710f88 AutoTest: copter params need accel2 offsets 2015-01-29 14:05:16 +11:00
Craig Elder ee30cb9537 Autotest: Add APM Planner logo 2015-01-28 16:33:57 -08:00
Craig Elder bd490e21d0 autotest: Added APM Planner 2.0 to Index page 2015-01-28 16:33:55 -08:00
Kevin Hester 5b5ab01c07 SITL: Don't prompt for vagrant package installs (minor) 2015-01-28 10:52:50 +09:00
Andrew Tridgell b4265cf467 autotest: fixes to quad view for new fg versions 2015-01-27 17:22:13 +11:00
Kevin Hester ff4151ef47 SITL: Update install instructions based on Robert's finding 2015-01-23 11:00:09 +09:00
Kevin Hester 4eb2cc0173 SITL: Build JSBsim so that plane sim works in Vagrant 2015-01-23 11:00:06 +09:00
Kevin Hester ad9c3d730c SITL: Numerous improvements to vagrant image and easier SITL for mac/windows
For full instructions/notes see Tools/vagrant/README.md

Notes:
* Old Vagrantfile updated to run faster and self init with our various
build dependancies.
* The sim_vehicle.sh script will now implicitly configure if necessary
* run_in_terminal_window.sh is now smart enough to use Screen sessions.  Or
if those are not available to warn the user but run the command with logging
going to a file in /tmp.
2015-01-23 11:00:04 +09:00
Randy Mackay d26121036f AutoTest: param file to enable SIM OptFlow 2015-01-22 14:40:23 +09:00
Andrew Tridgell b4ce3e0ba5 autotest: lock in the altitude before the FBWB test 2015-01-22 11:33:25 +11:00
Andrew Tridgell d239d8314a Replay: fixed replay for re-organised dataflash messages 2015-01-21 14:38:37 +09:00
Randy Mackay 4aba4b13ac AutoTest: enable BATT_MONITOR for Copter AVC 2015-01-21 14:38:11 +09:00
Randy Mackay 13fa029399 AutoTest: enable BATT_MONITOR for Plane 2015-01-21 14:38:08 +09:00
Andrew Tridgell ad8480d5f7 Replay: keep airspeed msgs in log 2015-01-20 09:11:07 +11:00
Andrew Tridgell 731678b0a1 Travis: test building without logging for plane 2015-01-17 10:46:01 +13:00
Randy Mackay 2a7f78a2cd AutoTest: reduce copter throttle when in stabilize
Simulated copter is flying too high and causing the land to timeout
2015-01-14 12:41:57 +09:00
mirkix 189dd158d7 Linux_HAL_Essentials: add channel mapping comments for RCInput and RCOutput 2015-01-13 12:18:42 +13:00
Andrew Tridgell 231b44fc83 Replay: fixed baro.setHIL call 2015-01-09 11:50:57 +11:00
Andrew Tridgell b0030126a8 VARTest: updates for new AP_Baro API 2015-01-09 11:50:55 +11:00
Andrew Tridgell 488714ccba Replay: updates for new AP_Baro API 2015-01-09 11:50:55 +11:00
Andrew Tridgell 406f11423e Replay: enable array bounds checking in Replay 2015-01-09 11:05:21 +11:00
Andrew Tridgell c9b7d27b98 Travis: use px4-cleandep to make script more robust 2015-01-07 08:40:43 +11:00
Andrew Tridgell 82a08036f6 autotest: use small INS offsets so INS is recognised as being calibrated 2015-01-05 08:41:54 +11:00
Andrew Tridgell a658dc4f60 VARTest: fixed build 2015-01-05 07:36:56 +11:00
Andrew Tridgell b3316865fa CPUInfo: fixed build 2015-01-05 07:36:49 +11:00
Andrew Tridgell 0d8faab48f Replay: fixed build with AHRS change 2015-01-03 14:16:34 +11:00
Andrew Tridgell 584fa9b4bf Replay: fixed format string for EKF4 2015-01-03 14:07:25 +11:00
Andrew Tridgell 1359e6d321 travis: we need a "make configure" at the start 2015-01-01 09:40:32 +11:00
Andrew Tridgell 9b5a2ea1d0 Replay: fixed build 2015-01-01 09:37:17 +11:00
Andrew Tridgell 494789054e travis: enable wide range of builds in Travis-CI 2015-01-01 09:32:25 +11:00
Randy Mackay 765fa0e223 AutoTest: higher copter throttle when in stabilize 2014-12-31 15:23:00 +09:00
priseborough 9c8406998b Replay: Don't log EKF optical flow data if not required 2014-12-31 13:16:10 +09:00
Randy Mackay 82a83200b1 AutoTest: minor fix to AVC copter params
remove unnecessary AHRS_EKF_USE because it's on by default now
2014-12-30 20:48:53 +09:00
Randy Mackay 4ea48f8f64 AutoTest: increase throttle for fly_square test 2014-12-30 20:48:12 +09:00
Andrew Tridgell 8d393c89d0 autotest: fixed bash syntax 2014-12-27 21:40:57 +11:00
Brandon Basso 4ace5bcccb CHDK script changes
S100 settings
2014-12-26 16:04:35 +09:00
Andrew Tridgell 068b5a54c9 Replay: prevent float exception in log writing 2014-12-09 12:45:58 +11:00
Andrew Tridgell fa95ea91fd Replay: generate dataflash logs in Replay
this allows the calculated EKF flight path to be compared with
different parameters by using replay
2014-12-08 11:25:22 +11:00
Grant Morphett 89602d60fd Autotest: Added BMAC (Belconnen Model Aero Club) to the locations list. 2014-12-07 10:58:08 +11:00
Andrew Tridgell a9defa3508 autotest: build some examples for px4-v2 2014-11-28 18:15:30 +11:00
Andrew Tridgell 1c94559fa2 autotest: auto-update uavcan repo 2014-11-28 07:29:44 +11:00
Andrew Tridgell a3422325c7 Replay: cope with new airspeed log msg 2014-11-22 18:27:51 +11:00
Andrew Tridgell c52578426e Replay: cope with up to 3 IMUs 2014-11-16 12:31:05 +11:00
Craig Elder 324473a15b Frame_params: Updating 3DR_X8_RTF.param for Copter 3.2 2014-11-14 18:03:29 -08:00
Craig Elder 5ea947de2f Frame_params: Updating 3DR_X8-M_RTF for Copter 3.2 2014-11-14 17:56:56 -08:00
Craig Elder e3d6b25301 Frame_params: Updated 3DR_X8+_RTF 2014-11-14 13:52:38 -08:00
Arthur Benemann 14c77adca9 Tools: Updated gcc-arm compiler to version 4_7-2014q2
As suggested in the thread at the following link:
https://groups.google.com/forum/#!topic/drones-discuss/hiD23c3w6xQ
2014-11-14 10:47:19 +11:00
Andrew Tridgell ce4da9b09c autotest: raise timeout again 2014-11-14 10:26:18 +11:00
Dario Lindo Andres 18e4747a6f Added name to GIT_Success.txt 2014-11-13 10:55:58 -08:00
Andrew Tridgell 0d7ec0fbfe autotest: fixed buildlogs location for *.BIN 2014-11-13 21:52:48 +11:00
Andrew Tridgell e49cd68b83 autotest: save core and elf files
try to catch floating pt exception causes
2014-11-13 17:27:02 +11:00
Andrew Tridgell 7f82397467 autotest: ensure we get the BIN flight logs even on mission failure 2014-11-13 16:31:26 +11:00
Brandon Basso 74232fd74a Tools: CHDK SX260 script update
changes default Tv to be 1/1600 (higher) and ISO to be lower 200/800
Max1/Max2.  Should produce more crisp images in low light.
2014-11-11 18:04:26 -08:00
Brandon Basso 136c358c24 Tools: Added initial support for Canon S100
initial commit
2014-11-11 18:03:57 -08:00
bugobliterator b383e1633b Tools/Linux_HAL_Essentials: Add loading of PWM capes to support ToneAlarm
new capes to be loaded by startup.sh: am33xx_pwm and bone_pwm_P8_36
2014-11-10 06:27:48 +11:00
Clay McClure 12c514553d AutoTest: copter test that zero alt defaults to current alt 2014-11-06 11:53:56 +09:00
Andrew Tridgell 0738d75701 build_devrelease: build all frames for jons release 2014-11-06 07:16:30 +11:00
Randy Mackay 95827e59c1 AutoTest: fix fly_mission to recognise end of mission
Copter's behaviour after completing a mission has changed so it does not
automatically switch to Loiter mode but rather stays at the last
waypoint.  This was confusing the fly_mission function.
2014-11-05 18:03:47 +09:00
Andrew Tridgell 4e87056631 Replay: fixed build with AP_NavEKF API change 2014-10-31 10:47:57 +11:00
Andrew Tridgell 34a43b2d99 autotest: fixed backup of autotest .bin logs 2014-10-30 18:30:15 +11:00
Jonathan Challinger 210f4397da Replay: clean up unused variables deltaGyroBias and divergeRate 2014-10-30 18:17:37 +11:00
priseborough 296dfad600 Replay : Remove unused numerical divergence metric 2014-10-30 18:17:37 +11:00
Andrew Tridgell d95a1be3d6 scripts: fixed devrelease permissions 2014-10-30 12:32:42 +11:00
Andrew Tridgell 05b903654e autotest: added link to devbuild tree 2014-10-30 11:13:36 +11:00
Andrew Tridgell c0f18272ed autotest: added developer build support
this creates firmware builds for developers in the devbuild directory
2014-10-30 11:12:17 +11:00
Craig Elder 5df3d24c77 Frame_params: 3DR_X8+_RTF.param
Adding param file for 3DR X8+
2014-10-28 19:33:44 -07:00
Markus Koetter 789fd06192 LogAnalyzer - Improve Autotune Test
- previously version could report failed autotune sessions as valid and
   valid sessions as failed
2014-10-27 15:55:57 -07:00
Markus Koetter c2030de4ec LogAnalyzer: write \xff EOF assumption to stderr 2014-10-27 15:53:36 -07:00
Markus Koetter cf4435989e LogAnalyzer: Binary Logs may end with \xff
- ignoreBadlines can be used to assume this is a proper EOF
2014-10-27 15:53:35 -07:00
Randy Mackay 4aa07d7aef LogAnalyser: rename BalanceTwist to MotorBalance 2014-10-27 13:58:19 +09:00
Randy Mackay 98e9ce3206 LogAnalyser: TestBalanceTwist sanity check of motor values 2014-10-27 13:58:16 +09:00
Jonathan Challinger a62f1f0f48 LogAnalyzer: updated testCompass to match our prearm check 2014-10-27 13:58:15 +09:00
Jonathan Challinger 0955284d7e LogAnalyzer: balance/twist initial commit 2014-10-27 13:58:12 +09:00
Andrew Tridgell 485397c4cb Replay: cope with old copter attitude and baro msgs 2014-10-25 11:20:26 +11:00
Andrew Tridgell 39d623ff94 VARTest: convert to new AP_InertialSensor API 2014-10-24 12:10:39 +11:00
Andrew Tridgell d809ce51a7 Replay: convert to new AP_InertialSensor API 2014-10-24 12:10:38 +11:00
Craig Elder df16dd67d2 Frame_params: 3DR_Iris+.param
Add GPS_HDOP_GOOD
2014-10-23 17:05:08 -07:00
benoit35690 92b67cca5b Added name to GIT_Success.txt 2014-10-21 11:47:28 +09:00
Randy Mackay 34352860e7 SITL: remove _randy sitl startup scripts
sim_vehicle.sh can be used instead and is far more flexible
2014-10-20 12:10:05 +09:00
Andrew Tridgell baad65bafc Replay: update for new copter ATTITUDE message 2014-10-19 20:12:12 +11:00
Andrew Tridgell fce20b24c2 Replay: fixed printf format 2014-10-19 19:41:57 +11:00
Andrew Tridgell 6e0e56a6ef Replay: fixed loading of users parameters and parameter override
use compass.set_offsets() to avoid trying to write to storage
2014-10-15 09:17:22 +11:00
Andrew Tridgell b688577825 autotest: update compiler 2014-10-13 16:07:32 +11:00
Andrew Tridgell b0c9e97181 Linux_HAL_Essentials: P8.15 is an input pin 2014-10-08 12:50:50 +11:00
Craig Elder adf741b959 Frame_params: Updated 3DR_X8-M_RTF.param 2014-10-07 15:00:57 -07:00
Andrew Tridgell e0caee9500 Linux_HAL_Essentials: rebuilt rcinpru0 with 300 ring buffer entries
thanks to Sid for doing this
2014-10-07 14:57:35 +11:00
Andrew Tridgell 994b2597fd Linux_HAL_Essentials: change ring buffer to 300 entries
this ensures full SBUS frames can be decoded
2014-10-07 14:57:34 +11:00
Craig Elder 5b23f81e2b Frame_params: Updating 3DR_X8-M_RTF.param 2014-10-06 16:07:49 -07:00
Craig Elder 5d7ec98d7a Frame_params: Adding 3DR_X8-M_RTF.param 2014-10-06 15:44:35 -07:00
Craig Elder 41ce8c2abd Frame_params: 3DR_Iris+
Decreased ATC_RATE_RP_MAX to 18000
2014-10-06 12:17:52 -07:00
Randy Mackay 41d7462eee LogAnalyzer: add POSHOLD to TestPitchRollCoupling 2014-09-29 11:46:02 +09:00
Craig Elder ab46f2d2fe Frame_params: 3DR_Iris+ reduced WP_NAV to 650 2014-09-24 13:43:52 -07:00
Jonathan Challinger 7c3e614c19 LogAnalyzer: Add IMU Mismatch check 2014-09-24 15:50:23 +09:00
Craig Elder 3f687733e6 Frame_params: added 3DR_AERO_M.param 2014-09-17 18:48:48 -07:00
Craig Elder da66c7df36 Frame_params: 3DR_Aero_RTF.param Changed tuning 2014-09-17 18:46:52 -07:00
Craig Elder 4c38f51337 Frame_Parameters: 3DR_Iris+ changed mode switch configuration 2014-09-16 00:12:40 -07:00
Craig Elder f9f6f39d61 Merge branch 'master' of https://github.com/diydrones/ardupilot 2014-09-11 23:06:10 -07:00
Craig Elder d26173bf81 Frame_params: Updated 3DR Iris+ 2014-09-11 23:05:28 -07:00
Kristian Klausen 7b0046e75e Tools/autotest/sim_vehicle.sh: Added option to run the sim_vehicle framework with an external simulator 2014-09-11 20:09:06 +10:00
Craig Elder 6e79ab8478 Frame_params: Added Frsky telemetry to 3DR_Iris+.param 2014-09-10 13:30:59 -07:00
Craig Elder b28b0aa6c1 CHDK-Scripts: Move SX260 file to its own folder 2014-09-10 11:54:51 -07:00
Brandon Basso 114b83341d CHDK-Scripts : initial commit of the SX260 specific file 2014-09-10 11:52:15 -07:00
Craig Elder 6a6aee1d44 CHDK-Scripts: Creating folder for Cannon SX260 files 2014-09-10 11:47:17 -07:00
Craig Elder 5fae3638dc Frame_params: Updated 3DR_Iris+ 2014-09-10 10:54:06 -07:00
Craig Elder a6db3586f6 Frame_params: Removed Iris with 3 Position Mode Switch.param 2014-09-09 18:55:34 -07:00
Brandon Basso 752e32f338 CHDK-Scripts : add instructions 2014-09-09 18:30:35 -07:00
Brandon Basso f495d6550b CHDK-Scripts : initial commit 2014-09-09 18:30:35 -07:00
Craig Elder e6b2726738 Frame_params: 3DR_Iris+.parm 2014-09-09 12:36:04 -07:00
Craig Elder 6ea044cda9 CHDK-Scripts: Preparing to replace the script files 2014-09-09 11:48:16 -07:00
Craig Elder 2f2665c022 Frame_params: Updated 3DR_Iris+.param 2014-09-09 00:36:06 -07:00
Craig Elder 8fcc96bb79 CHDK-Scripts: Adding kap_uav 2014-09-09 00:28:21 -07:00
Craig Elder 6ff1aa39ca CHDK-Scripts: adding README.md 2014-09-09 00:10:23 -07:00
Craig Elder f1934c6db2 Initial Commit 2014-09-09 00:02:17 -07:00
Craig Elder df82e0accc Frame_Params: Added 3DR Iris+ 2014-09-08 12:40:10 -07:00
Craig Elder a57818dfc8 Frame_parameters: Updated Iris with 3 Position Mode Switch 2014-09-04 11:49:02 -07:00
Craig Elder 21e4144b29 Frame_params: Updated Iris with 3 Position Mode Switch 2014-09-03 16:47:18 -07:00
Andrew Tridgell 78c12ca9dd autotest: added skid steering support for rover in sim_vehicle.sh 2014-08-29 06:59:32 +10:00
Andrew Tridgell e836d1aa2b autotest: added CMAC_South
used to simulate takeoff to the south
2014-08-28 11:22:40 +10:00
Kevin Hester 81bd4c0b4c LogAnalyzer: If skipping badlines, ignore parse errors 2014-08-26 15:36:56 +09:00
Kevin Hester 5cb242f5a4 LogAnalyzer: Report missing parameters as test failures 2014-08-26 15:36:53 +09:00
Kevin Hester 332ab9bc1b LogAnalyzer: convert tabs to spaces (only) per coding conventions 2014-08-26 15:36:50 +09:00
Randy Mackay 68be36d4f8 AutoTest: reduce copter throttle when flying square
This will keep the copter lower during this test and resolve the timeout
during landing
2014-08-26 12:19:58 +09:00
Eric Liao e34b0847d7 3dr Berkeley moved - updated coords 2014-08-25 16:17:54 +09:00
Craig Elder 0ab3e40e92 Frame Parameters: Updated Mode Switch order 2014-08-21 13:34:42 -07:00
Andrew Tridgell e629a8d67a Linux: added example startup script for plane 2014-08-19 20:03:33 +10:00
bugobliterator 5e03df2d9a Tools:HAL_Linux_Essentials: store pin status during pulse instead of status after pulse 2014-08-19 10:08:16 +10:00
bugobliterator 210d3e8c32 Tools:HAL_Linux_Essentials:add rcinput test code
the test code performs continuous reads from ring buffer shared with PRU0
2014-08-19 10:08:16 +10:00
bugobliterator d8e36fee41 Tools:HAL_Linux_Essentials: Add PRU side of code for RCinput to run on PRU0
PRU0 with rcinpru0 firmware will be timing pin state changes and loading it inside ring buffer maintained inside SHARED_RAM at 0x12000 offset
2014-08-19 10:08:16 +10:00
Victor Mayoral Vilches 04a8377462 Tools: Change sensor configurations easily.
This shell script allows to change the sensor configuration
(for now just supports IMU changes) so that the autopilot is
compiled for different combinations of sensors. This has probed
to be useful with Linux-based boards (e.g.: PXF, Erle-board)
that include serveral, different sensors for each kind.
2014-08-19 10:08:16 +10:00
Craig Elder 27a7ea2766 Frame Parameters: 3DR Aero RTF 2014-08-18 15:33:34 -07:00
Randy Mackay 946de4f644 Tools: build antenna tracker binary 2014-08-18 13:00:16 +09:00
Craig Elder b0d26d9ace * Frame Parameters: 3DR AERO RTF
Updated RLL2SRV_P parameter
2014-08-15 12:18:49 -07:00
Craig Elder 926d57698d Frame Parameters: 3DR AERO RTF
Updated 3DR AERO RTF parameters
2014-08-14 18:37:29 -07:00
Andrew Tridgell e66243f72e autotest: add AntennaTracker autodoc to autotest.diydrones.com/Parameters 2014-08-15 06:42:07 +10:00
Randy Mackay 8925c61ae4 Tools: build antenna tracker for firmware.diydrones.com 2014-08-14 20:56:09 +10:00
Randy Mackay a0468db064 AutoTest: update sim_vehicle for antenna move 2014-08-14 20:56:07 +10:00
Randy Mackay db9750ee7a Tools: update build script for Antenna move 2014-08-14 20:56:03 +10:00
Randy Mackay eb4eca8550 Antenna: move up one directory 2014-08-14 20:56:00 +10:00
Andrew Tridgell caeb2c4d0d autotest: raise timeout to 7000 seconds 2014-08-14 14:29:16 +10:00
Andrew Tridgell 1f7305f516 autotest: support starting with HIL for plane 2014-08-13 21:35:26 +10:00
Andrew Tridgell ea889e2e00 Replay: fixed build 2014-08-13 18:46:44 +10:00
Andrew Tridgell 2918b04f17 CPUInfo: fixed build 2014-08-13 18:46:44 +10:00
Andrew Tridgell 65614da10b VARTest: convert to using StorageManager 2014-08-13 18:46:44 +10:00
Andrew Tridgell cbcb5ec0a9 AntennaTracker: convert to using StorageManager 2014-08-13 18:46:44 +10:00
labtoast dfc9470e01 SITL: added missing parameters to sim_multicopter.py call 2014-08-11 11:22:16 +10:00
Andrew Tridgell 5bf69d4ab3 VARTest: fixed build 2014-08-10 22:36:10 +10:00
Andrew Tridgell 72d35e8da4 CPUInfo: fixed build 2014-08-10 22:36:03 +10:00
Andrew Tridgell 35b0692fd5 Replay: fixed build 2014-08-10 21:25:16 +10:00
Andrew Tridgell 56f7d9285f autotest: added -N option to sim_vehicle.sh
useful for unusual builds
2014-08-09 22:50:15 +10:00
Andrew Chapman 50f9b4d4bb LogAnalyzer: added help text for --format option 2014-08-06 19:51:30 -07:00
Kevin Hester 097a3b23e6 LogAnalyzer: Fix handling of the -f format option (bin, log, auto)
Previously this option was ignored.
2014-08-06 19:51:29 -07:00
JD Russo 86baccffbd common.py: Removed timeout reset in wait_altitude
common.py:wait_altitude contained an if statement that, if the plane was changing altitude at all would reset tstart, making the timeout effectively useless. Removing this line allows wait_altitude to respect the timeout the user sets.
2014-08-07 12:40:34 +10:00
JD Russo dd93c6e0ca autotest_jenkins.py: Fixed spelling of prerequisites
Same change as in autotest.py, just correcting the spelling of 'prerequisites' in a couple places from the original misspelled 'prerequesites'
2014-08-06 19:12:02 -07:00
JD Russo 23dc2db036 autotest.py: changed 'prerequesites' to correct spelling
In a few places in autotest, the word 'prerequisites' was misspelled as 'prerequesites'. This is just a simple commit to fix that spelling.
2014-08-06 19:12:01 -07:00
Andrew Tridgell b89988b2df Replay: fixed build 2014-08-06 22:27:50 +10:00
Andrew Tridgell 23fb34c96d AntennaTracker: fixed build 2014-08-06 19:01:19 +10:00
Andrew Tridgell 7b8287793c CPUInfo: fixed build 2014-08-06 18:56:39 +10:00
Andrew Tridgell d6ee11db6e VARTest: fixed build 2014-08-06 17:59:20 +10:00
Andrew Tridgell 06c3a0e96c autotest: fixed tracker sim for non-onoff mode 2014-08-03 18:16:50 +10:00
Andrew Tridgell 671708d11d AntennaTracker: added YAW_TRIM and PITCH_TRIM 2014-08-03 18:16:37 +10:00
Andrew Tridgell 02e173b094 AntennaTracker: do an initial pressure calibration on startup 2014-08-03 17:38:19 +10:00
Craig Elder 7d152cbbf2 Frame_params: Added Iris with 3 Positon Mode Switch.param 2014-07-29 17:27:37 -07:00
Randy Mackay 61506c52dc Replay: fix example sketch 2014-07-29 15:26:05 +09:00
Andrew Tridgell 1aeac23f46 AntennaTracker: avoid integer underflow in mavlink txspace check 2014-07-27 22:18:52 +10:00
Andrew Tridgell a60590d1fe autotest: use run_in_terminal.sh for HIL 2014-07-27 22:12:08 +10:00
Andrew Tridgell 1ea1d9983d build: don't build examples for apm1 any more
so little APM1 development happening it is not worth it
2014-07-25 21:03:23 +10:00
Andrew Tridgell 95b62512f8 AntennaTracker: fixed build 2014-07-25 21:01:09 +10:00
Andrew Tridgell 9c69e736f1 CPUInfo: fixed build 2014-07-25 18:41:30 +10:00
Andrew Tridgell 0b6c5a6505 VARTest: fixed build 2014-07-25 17:17:34 +10:00
Andrew Tridgell 2ddfaa60b9 Replay: fixed build 2014-07-25 17:15:29 +10:00
bugobliterator 6b619562b5 Tools: Remove unrequired pru0 pin setups from BB-PXF-01-00A0 overlay 2014-07-25 15:29:29 +10:00
bugobliterator fdf916025a Tools: add unified device tree overlay to load all requisites
no more loading multiple capes to enable pru, spi, pwm etc. Steps to load the cape during boot also added.
2014-07-25 15:29:27 +10:00
akdslr 8ea64e62f8 VARTest: Removed CONFIG_SONAR_SOURCE and SONAR_SOURCE_ANALOG_PIN since no longer used 2014-07-24 14:41:55 +10:00
Andrew Tridgell 75e8157b4e AntennaTracker: support on/off servos
these servos are either moving at a constant rate, or off. To really
move them accurately we need to know about this and not use a PID.

This doesn't yet support ballerina, but could do with a bit more work.
2014-07-23 18:41:34 +10:00
Andrew Tridgell 8ea098ad21 autotest: support antenna trackers with on/off servos in SITL 2014-07-23 18:41:34 +10:00
Andrew Tridgell 0dcd0e600b Tools: remove unused Linux device tree files 2014-07-19 14:48:43 +10:00
Andrew Tridgell 4e7e69bafb Tools: added dtbo for PXF cape 2014-07-19 13:58:31 +10:00
Andrew Tridgell 183795df02 Tools: fixed DTS Makefile 2014-07-19 13:26:47 +10:00
Andrew Tridgell ad532b89bd Tools: new dts file for SPI on PXF cape 2014-07-19 13:22:09 +10:00
Andrew Tridgell 6848746219 Tools: rename a file with a space in it
spaces in filenames play havoc with unix tools
2014-07-19 12:21:05 +10:00
nwind21 485726258b autotest: Add code to detect if a hard link is not allowed (for VM's). 2014-07-15 12:22:48 +10:00
Markus Koetter e06b3f3ff6 Travis-CI: add vrubrain-v51 target (Copter) 2014-07-15 11:50:09 +10:00
Arthur Benemann ff11b13f9c tools: In install-prereqs-ubuntu.sh add support for relative paths
Install the required projects (PX4*) in the same folder from where the script is called.
Install the arm toolchain at /opt
2014-07-15 11:47:01 +10:00
Arthur Benemann b76b090acd tools: Make install-prereqs-ubuntu.sh work with newer versions of Ubuntu
* Install libraries for 64bit Ubuntu systems.
* Less noise apt-get output
* Install packages required for SITL simulation
* Install pymavlink, MAVProxy and droneapi
* Remove modemmanager package
* Add autotest/ to the path
2014-07-15 11:46:58 +10:00
Randy Mackay ba25f051e7 AutoTest: reduce fence radius to 150m for testing 2014-07-14 11:25:30 +09:00
bugobliterator 003806fcc1 HAL_Linux: pwmpru,HAL_Linux_RCOut code doesn't wait for magic flag to send data
change pwmpru code to remove frequent wrong PWM outputs
Replace pru firmware with new modified pru firmware
2014-07-14 09:44:37 +10:00
Andrew Tridgell 9ebc95b6fd AntennaTracker: converted to new HAL sensor setup 2014-07-14 09:44:36 +10:00
Andrew Tridgell e2822a2d8f Tools: added Makefile for BBB overlays 2014-07-14 09:44:35 +10:00
Víctor Mayoral Vilches 7cb547272b Linux_HAL_Essentials: Minor type fixed in the README 2014-07-14 09:44:33 +10:00
Víctor Mayoral Vilches 464cb8fed9 Linux_HAL_Essentials: Update README for Ubuntu.
Added a note pointing out the instructions for precise.
2014-07-14 09:44:33 +10:00
Siddharth Bharat Purohit 9c33420aab HAL_Linux: Linux HAL Readme:change firmware name to pwmpru1 2014-07-14 09:32:29 +10:00
bugobliterator aa1db00908 Linux_HAL_Essentials: cleanup PWM PRU code
change firmware name to pwmpru1
2014-07-14 09:32:29 +10:00
Siddharth Bharat Purohit e438250068 Linux: Startup script:add reloading pru firmware option 2014-07-14 09:32:29 +10:00
Siddharth Bharat Purohit 1956c68e16 Linux: Add usage steps for PRU firmware to Readme 2014-07-14 09:32:29 +10:00
bugobliterator 971967be4b Linux: add PRU PWM code to Linux_HAL_Essentials 2014-07-14 09:32:29 +10:00
Andrew Tridgell d79877792f Linux_HAL: updated binary dtbo files 2014-07-14 09:32:29 +10:00
Andrew Tridgell cd98593280 Linux_HAL: added dts files for overlays
These are the BBB/PXF specific DTS files, fixed for the SPI pin handling
2014-07-14 09:32:29 +10:00
bugobliterator 5bcdb039e2 HAL_Linux: Make asynchronous PRU write and reduce the size of data exchange
Change to sending Total Period and hi Period, rather than Hi and Lo Period
Change PRU firmware accordingly
2014-07-14 09:32:29 +10:00
bugobliterator 73d42f3e33 Linux: Add initialising script and required overlays and firmware 2014-07-14 09:31:49 +10:00
Víctor Mayoral Vilches 283beba4bb Tools: Add PXF enable and check CS scripts 2014-07-14 09:29:36 +10:00
Andrew Tridgell e96ab86eab build: fixed directory handling in build_binaries.sh 2014-07-14 08:13:28 +10:00
Andrew Tridgell 35e905d003 build: added some debug 2014-07-13 21:19:29 +10:00
Andrew Tridgell 527de3f2e4 AntennaTracker: changes for more common mavlink code 2014-07-13 15:37:50 +10:00
Andrew Tridgell 4fad9b0a89 Replay: fixed build of replay tool
changes to compass API
2014-07-12 11:08:04 +10:00
Andrew Tridgell 20accefe51 VARTest: fixed build with compass changes 2014-07-12 10:22:25 +10:00
Aaron Curtis 179d854a26 LogAnalyzer: Update to include the new "format" argument, and fix scoping on two new tests. 2014-07-08 14:13:00 -07:00
Aaron Curtis 406fedf727 LogAnalyzer: Allow instantiation of DataFlashlog with no input filename, for backward compatibility. My changes make m_dflog=DataFlashlog('/path/to/file.log') work, which seems like the preferable way, but we don't want to break backwards compatibility. 2014-07-08 14:12:59 -07:00
Aaron Curtis 0f5360fefa LogAnalyzer: Default to automatic log format detection. 2014-07-08 14:12:58 -07:00
Aaron Curtis c6d783409c LogAnalyzer: There is no self.logfile, so this must be self.filename. 2014-07-08 14:12:58 -07:00
Aaron Curtis fc79a06b9f LogAnalyzer: Fix indent which I broke when merging. 2014-07-08 14:12:57 -07:00
Aaron Curtis 9dbfa40afd LogAnalyzer: LogAnalyzer: make all subclasses of Test call their parent __init()__ function when overriding that function. This is the way of Python. 2014-07-08 14:12:56 -07:00
Aaron Curtis f0cf612372 LogAnalyzer: Fix scoping in LogAnalyzer.py . Tests still need fixing.
Conflicts:
	Tools/LogAnalyzer/LogAnalyzer.py
2014-07-08 14:12:56 -07:00
Aaron Curtis 842f5d20c4 LogAnalyzer: Fix scoping in DataflashLog.py so that multiple instances of DataflashLog can coexist.
Conflicts:
	Tools/LogAnalyzer/DataflashLog.py
2014-07-08 14:12:55 -07:00
Markus Koetter da178ee3b6 LogAnalyzer: add TestAutotune
- very basic, checks for autotune start/success/fail and provides the
   most recent ATUN/ATDE values
 - very handy in case autotune fails
2014-07-07 18:10:13 -07:00
Markus Koetter 6ce0dbf3b3 LogAnalyzer: TestPitchRollCoupling add mode ""
- "" is a valid alias for AUTOTUNE
2014-07-07 18:09:29 -07:00
Markus Koetter c1d1406c59 LogAnalyzer - accept invalid FMT messages in binary logs
- I really wish this was not necessary, but it is.
2014-07-07 17:54:45 -07:00
Markus Koetter 4e445a716a LogAnalyzer - label/name & format/type consistency 2014-07-07 17:54:44 -07:00
Markus Koetter 099d40f0f8 LogAnalyzer - adjust modeChanges for Plane/Rover
- I lack logs for both, not tested.
2014-07-07 17:54:43 -07:00
Markus Koetter 33d19fc893 LogAnalyzer - add binary log parsing
- parse using ctypes.LittleEndianStructure
 - define classes from FMT messages
 - use the classes as with Text logs for processing
2014-07-07 17:54:41 -07:00
Markus Koetter 64ae2011b5 LogAnalyzer - binary log parsing preparations
- use FMT messages to create classes using type()
 - work with these classes instead of arrays
 - split parsing and processing
2014-07-07 17:54:40 -07:00
Linus Casassa ce0efdb7d2 LogAnalyzer: Adding HYBRID mode to LogAnalyzer. 2014-07-07 17:37:52 -07:00
Arthur Benemann 8e0f3c152a Tools: Added 3DR Berkeley to the locations list on SITL 2014-07-06 20:34:20 +09:00
Kevin Hester 0bccbf2409 tools: my change to use stdin, broke reading logs that have no header
This fixes it (I'm careful to avoid seeking)
2014-07-01 14:29:15 +10:00
Kevin Hester ddd24e8135 tools: LogAnalyser if we fall off end of GPS data, return a valid time
Found cases where the loiter test would fail with some flights if
the vehicle never left that mode.  Don't use None in that case
2014-07-01 14:28:27 +10:00
Kevin Hester 1a4fce60e8 tools: LogAnalyser, ensure error msgs go to stderr not stdout 2014-07-01 14:28:23 +10:00
Kevin Hester 7dc356f4ca tools: LogAnalyzer fixes to work with pipes as input
seek is not supported on pipes (and not needed in this case)
tell is also not supported, so count bytes on our own
2014-07-01 14:28:11 +10:00
Kevin Hester 867f884954 tools: Allow LogAnalyser to emit its xml to stdout.
If you use - as the name for the output file.
2014-07-01 14:28:08 +10:00
Kevin Hester a756e4f3ef tools: Allow LogAnalyzer to read from stdin rather than just files
Use - intead of the filename
2014-07-01 14:28:04 +10:00
Kevin Hester a31498f599 tools: Change LogAnalyzer tabs to spaces (per APM python conventions) 2014-07-01 14:23:42 +10:00
Aaron Curtis 068febda1f Tools: Fix broken duplicate check for adding new libraries to the data structure 2014-06-28 13:17:45 +10:00
Andrew Chapman 2f4af05f33 LogAnalyzer: renamed test from "Underpowered" to "Thrust" 2014-06-24 15:07:47 +10:00
Andrew Chapman 4a5e0bbe06 LogAnalyzer: renamed PASS to GOOD in output (and enums)
as per Craig’s request to clarify test output
2014-06-24 15:07:47 +10:00
Andrew Chapman a6eb5307b6 LogAnalyzer: renamed 'logs' folder to 'examples'
as per Craig’s request
2014-06-24 15:07:47 +10:00
Andrew Chapman 0fe6c1ee3a LogAnalyzer: fixed XML output glitch in the case of a skipped (NA) test 2014-06-24 15:07:47 +10:00
Andrew Chapman f122b1ba37 LogAnalyzer: added 'import collections', allowed for some AC3.2 logging changes 2014-06-24 15:07:47 +10:00
Andrew Chapman 795f93949b LogAnalyzer: escape strings in XML output 2014-06-24 15:07:46 +10:00
Andrew Chapman 0f5a89f22e LogAnalyzer: added check for binary log files (can't parse yet) 2014-06-24 15:07:46 +10:00
Andrew Chapman 70c2682c28 LogAnalyzer: detect all zeros in MAG X/Y/Z data 2014-06-24 15:07:46 +10:00
Andrew Chapman 35830f928d LogAnalyzer: added --verbose flag, added test for MAG interference 2014-06-24 15:07:46 +10:00
Andrew Chapman 130a2dcb0b LogAnalyzer: added LogIterator, copter roll/pitch > max lean angle test, 2014-06-24 15:07:46 +10:00
Andrew Chapman 81fcf4bda7 LogAnalyzer: combined statusMessage and extraFeedback 2014-06-24 15:07:46 +10:00
Andrew Chapman 1356d53e7b LogAnalyzer: report skippedLines, cleaned up DataflashLog.read() error handling 2014-06-24 15:07:46 +10:00
Andrew Chapman 2a406ac699 LogAnalyzer: added GPS glitch detection to GPS test 2014-06-24 15:07:46 +10:00
Andrew Chapman 90f07aae61 LogAnalyzer: added unit test, started moving from dictData to listData
added unit test, started moving from dictData to listData, cancelled
pre-3.0 log reading, separated DataflashLog constructor and read() call
2014-06-24 15:07:46 +10:00
Andrew Chapman d6b091c39f LogAnalyzer: added BETA feedback info to output 2014-06-24 15:07:45 +10:00
Andrew Chapman c4828e1d3d LogAnalyzer: fixed plane+rover parsing, added test for underpowered copters 2014-06-24 15:07:45 +10:00
Andrew Chapman 301a3bcdaf LogAnalyzer: added test for dupe log data 2014-06-24 15:07:45 +10:00
Andrew Chapman 5aa1e6a2dd LogAnalyzer: changed command flags a little, tidy, started on TestPitchRollCoupling 2014-06-24 15:07:45 +10:00
Andrew Chapman e0ada31872 LogAnalyzer: adding Roberts bad PM performance log 2014-06-24 15:07:45 +10:00
Andrew Chapman 8d691c2a60 LogAnalyzer: added PM slow loop check, first version of xml output 2014-06-24 15:07:45 +10:00
Andrew Chapman 36e480483f LogAnalyzer: Initial commit for discussion
A lot of this is still stub code, but far enough along for discussion
and feedback. Some good example tests are TestVibration and TestBrownout

datatypes handled correctly now (previsouly all read as floats), added
flag to skip bad input lines, now prints some general log info (size,
duration, etc), added some basic performance timing,
2014-06-24 15:07:45 +10:00
hazyhxj f2d3fed612 Add name to GTI_Success.txt
this is just a test
2014-06-10 20:02:56 +09:00
Andrew Tridgell 94876dccb1 autotest: added Ballarat to autotest locations 2014-06-07 20:52:08 +10:00
Randy Mackay 919b0ea29b CPUInfo: add fast_atan2 2014-06-06 18:51:05 +09:00
Randy Mackay 4f75cbcce0 AutoTest: fix error reporting for copter AVC mission 2014-06-06 11:42:57 +09:00
Andrew Tridgell 69349f7fb0 autotest: added TomCarpark test location 2014-06-04 14:02:19 +10:00