Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
40,392 Commits 71 Branches 509 Tags 790 MiB
Commit Graph

1184 Commits

Author SHA1 Message Date
Andrew Tridgell bd95331068 HAL_ChibiOS: added Pixhawk1-1M 
this is for 1M versions of the Pixhawk1. It is smaller than fmuv2 as
it only links the specific sensors needed for Pixhawk1
 2019-10-06 10:58:07 +11:00
Andrew Tridgell 2962211ea0 HAL_ChibiOS: changed optimisation of higher end boards to -O2 
-O3 does not seem to be a win, and takes up a lot more flash
 2019-10-01 08:33:13 +10:00
Andrew Tridgell 560a1bf9e0 HAL_ChibiOS: disable DMA for RCIN on Pixracer 
this frees up DMA for USART1_RX, which gives DMA for input over the
SERIAL5 WiFi port, which is important for applications where a
pixracer is being fed vision data over WiFi
 2019-10-01 08:32:56 +10:00
Mark Whitehorn 2034bde367 HAL_ChibiOS: fix FMU fast_channel_mask 
fix IO fast channel mask
use IOMCU chmask to only set right channels
remove unused variable
 2019-10-01 08:32:00 +10:00
Andrew Tridgell 62c3fec45c HAL_ChibiOS: fixes from LGTM errors 2019-09-22 21:07:54 +10:00
Andrew Tridgell f6b28f3013 HAL_ChibiOS: fixed delay for OneShot125 channels 
we were delaying output for OneShot125 by 8x as much as we need to,
which reduced our max loop rate
 2019-09-22 21:07:49 +10:00
Andrew Tridgell eeb6fbe5ee HAL_ChibiOS: fixed undef for define lines 
this fixes IMU heater enable for CubeBlack+
 2019-09-16 12:55:44 +10:00
Andrew Tridgell dceee38d69 HAL_ChibiOS: fixed IMU order and board ID for CubeBlack+ 2019-09-16 12:55:36 +10:00
bugobliterator e540248695 HAL_ChibiOS: hwdef: add hwdef for CubeBlack+ 2019-09-16 12:55:34 +10:00
Andrew Tridgell 28cca004f2 HAL_ChibiOS: added default params for skyviper-journey 2019-09-12 14:02:36 +10:00
Andrew Tridgell 1dca0a16f5 HAL_ChibiOS: rename skyviper-f412 to skyviper-journey 2019-09-12 14:02:36 +10:00
Andrew Tridgell b33afde884 HAL_ChibiOS: allow safety button on CUAV_GPS to be used for "stay in bootloader" 
allows for recovery of bad CAN firmware
 2019-09-10 16:22:33 +10:00
Andrew Tridgell c6a9f067e2 HAL_ChibiOS: enable LEDs on CUAV_GPS 2019-09-10 16:22:33 +10:00
Andrew Tridgell 3dfe15443d HAL_ChibiOS: fixed orientation of CUAV_GPS compass 2019-09-10 16:22:33 +10:00
Andrew Tridgell 03c1a8bfd9 HAL_ChibiOS: use safety button logic from AP_BoardConfig 2019-09-10 16:22:33 +10:00
Andrew Tridgell 0ea67943b9 HAL_ChibiOS: enable safety button on CUAV_GPS 2019-09-10 16:22:33 +10:00
Andrew Tridgell 186eedf838 HAL_ChibiOS: enable safety LED 2019-09-10 16:22:33 +10:00
Andrew Tridgell 75696997cc HAL_ChibiOS: added buzzer support to CUAV_GPS 2019-09-10 16:22:33 +10:00
Andrew Tridgell cbe0af2463 HAL_ChibiOS: setup for LEDs on KakuteF4 
this makes Kopis1 display LEDs properly
 2019-09-10 13:03:28 +10:00
Andrew Tridgell f441223b55 HAL_ChibiOS: implement updated NeoPixel API 
allow for N leds per chain, and setting separate colours per led in
each chain
 2019-09-10 13:03:28 +10:00
Tom Pittenger e3416b66dc AP_HAL_ChibiOS: add Neopixel output type, similar to dshot 2019-09-10 13:03:28 +10:00
Andrew Tridgell 91e8752c17 HAL_ChibiOS: wrap more libc functions 
this saves a few k of flash as it avoids linking libc versions of some
functions
 2019-09-09 13:31:30 +10:00
Andrew Tridgell 3166f84954 HAL_ChibiOS: added vsnprintf wrapper 
this allows us to use a common snprintf implementation
 2019-09-09 13:31:30 +10:00
Andrew Tridgell 83872c23e5 HAL_ChibiOS: fixed AP_Periph build 2019-09-06 08:51:45 +10:00
Andrew Tridgell fd80220d3e HAL_ChibiOS: setup PH4-mini RCIN port by default 2019-09-06 08:51:45 +10:00
Andrew Tridgell 54649a0e4f HAL_ChibiOS: fixed KakuteF4 define for SERIAL2 2019-09-06 08:51:45 +10:00
Andrew Tridgell 06b272705e HAL_ChibiOS: run RCIN thread at 1kHz 
this gives fast enough response for SBUS parsing on a UART
 2019-09-06 08:51:45 +10:00
Andrew Tridgell c841b39ea2 HAL_ChibiOS: switch to AP::RC() for AP_RCProtocol 2019-09-06 08:51:45 +10:00
Andrew Tridgell bf2cf7834d HAL_ChibiOS: fixed a bug in parity/stop-bit setting on STM32F7 and H7 
and add get_options() method
 2019-09-06 08:51:45 +10:00
Andrew Tridgell ad2890dc5a HAL_ChibiOS: added connector pinouts for PH4-mini 2019-09-06 08:51:45 +10:00
Andrew Tridgell b344946300 HAL_ChibiOS: prevent duplicate sensors in hwdef.dat 
throw an error on configure if there is a duplicate
 2019-09-05 06:37:35 +10:00
Andrew Tridgell 2c5c8106a5 HAL_ChibiOS: removed duplicate barometer from fmuv5 2019-09-04 21:24:01 +10:00
Andrew Tridgell 708ee47c03 HAL_ChibiOS: fixed f103 rm3100 2019-09-04 16:27:47 +10:00
Andrew Tridgell c2c8702329 HAL_ChibiOS: convert remaining boards to use COMPASS specifier 2019-09-04 16:27:47 +10:00
Andrew Tridgell 3aa01448ff HAL_ChibiOS: use COMPASS specifier for f103-periph 2019-09-04 16:27:47 +10:00
Andrew Tridgell 316e7cf7e6 HAL_ChibiOS: fixed mini-pix compass and baro probing 
removed dup baro and fixed compass probe
 2019-09-04 16:27:47 +10:00
Andrew Tridgell beca17c638 HAL_ChibiOS: use GET_I2C_DEVICE() for i2c probing 
this allows for the driver probing to use a macro to prevent loading
of duplicate i2c devices (AP_Compass does this)
 2019-09-04 16:27:47 +10:00
Michael du Breuil e19f0ef238 AP_HAL_ChibiOS: Remove set_stop_pin from AnalogSource 2019-09-04 09:54:50 +10:00
E Thomas c09d6908ed Enabled active buzzer output on OmnibusNanoV6 2019-09-03 09:59:53 +10:00
Andrew Tridgell 72494788f7 HAL_ChibiOS: convert more boards to use BARO specifier 2019-08-28 06:54:11 +10:00
Andrew Tridgell 0667747506 HAL_ChibiOS: convert some more boards to new IMU specifiers 2019-08-28 06:54:11 +10:00
Andrew Tridgell 5ce4ff916e HAL_ChibiOS: fixed Pixhawk1 gyro orientation 
this was broken by the recent switch to hwdef.dat for orientations
 2019-08-27 19:29:37 +10:00
Andrew Tridgell 0ffe2e75be HAL_ChibiOS: fixed warnings 2019-08-27 15:40:43 +10:00
Andrew Tridgell 9d760a2956 HAL_ChibiOS: disable re-entrancy in FATFS 
not needed now we have a semaphore in AP_Filesystem
 2019-08-27 15:40:43 +10:00
Andrew Tridgell bf79b65e07 HAL_ChibiOS: simplify stubs code 2019-08-27 15:40:43 +10:00
Andrew Tridgell d1565a96c5 HAL_ChibiOS: wrap cacheBuffer functions 
needed to avoid problem with end() method in UARTDriver shadowing with
F7 implementation of cache macros
 2019-08-27 15:40:43 +10:00
Andrew Tridgell b867ef35c0 HAL_ChibiOS: use AP_Filesystem API 2019-08-27 15:40:43 +10:00
Andrew Tridgell b30f3697d2 HAL_ChibiOS: fixed build without ISR limit 2019-08-27 10:29:56 +10:00
Andrew Tridgell 97c56c068e HAL_ChibiOS: update board IDs for AP_Periph firmwares 2019-08-27 10:29:56 +10:00
Andrew Tridgell 63f39c2bd6 HAL_ChibiOS: fixed build of iomcu firmware 2019-08-27 10:29:56 +10:00
Andrew Tridgell 64921b64f5 HAL_ChibiOS: enable sensors in peripheral firmwares 2019-08-27 10:29:56 +10:00
Andrew Tridgell fa76d1fbe6 HAL_ChibiOS: disable watchdog save in bootloader 2019-08-27 10:29:56 +10:00
Andrew Tridgell 5cbe85ee19 HAL_ChibiOS: allow for ADC and clock overrides 2019-08-27 10:29:56 +10:00
Andrew Tridgell dc89d10ccf HAL_ChibiOS: added hwdef.dat for CUAV_GPS 2019-08-27 10:29:56 +10:00
Andrew Tridgell c8806acaf5 HAL_ChibiOS: use AP_PERIPH env var 2019-08-27 10:29:56 +10:00
Andrew Tridgell cbc83d68cd HAL_ChibiOS: allow for CAN enable override on F4 2019-08-27 10:29:56 +10:00
Andrew Tridgell fb68fa8bc9 HAL_ChibiOS: fixed typo for 512k F4 parts 2019-08-27 10:29:56 +10:00
Andrew Tridgell e51a1a88df HAL_ChibiOS: initial hwdef-bl.dat for CUAV CAN GPS 2019-08-27 10:29:56 +10:00
Andrew Tridgell 66ab585a24 HAL_ChibiOS: setup defaults for CAN app versions 2019-08-27 10:29:56 +10:00
Andrew Tridgell d711bed405 HAL_ChibiOS: set default node ID of 117 
this allows for flight controllers without DNA support
 2019-08-27 10:29:56 +10:00
Andrew Tridgell ababe1e81d HAL_ChibiOS: disable UART support in f103-periph bootloader 2019-08-27 10:29:56 +10:00
Andrew Tridgell 2facfe0baa HAL_ChibiOS: support empty UART_ORDER 
for CAN bootloader without uart support
 2019-08-27 10:29:56 +10:00
Andrew Tridgell 9a7b52fd15 HAL_ChibiOS: added hwdef.dat for f103-periph 2019-08-27 10:29:56 +10:00
Andrew Tridgell 16bdaaa1af HAL_ChibiOS: added support for STM31F10x for AP_Periph 2019-08-27 10:29:56 +10:00
Stone white ec911710c9 hwdef: Enable Spektrum 3.3V VDD Power on fmuv5 2019-08-26 17:27:02 +10:00
Michael du Breuil 56e35e0712 AP_HAL_ChibiOS: Remove almost redundant code duplication from the HAL 2019-08-26 17:24:09 +10:00
Andrew Tridgell ffe0f338d3 HAL_ChibiOS: enable utime() API 2019-08-26 15:41:44 +10:00
Henry Wurzburg 00c111651a ChiBios: Omnibusf4pro hwdef tweak to allow active or passive buzzer 2019-08-26 12:22:53 +10:00
Andrew Tridgell aeb58cede1 HAL_ChibiOS: I2C timeout should be send+recv, not MAX(send,recv) 
MAX() is right for SPI, not I2C
 2019-08-26 09:13:39 +10:00
Andrew Tridgell 578e5dfdaa HAL_ChibiOS: add up i2c ISR count 2019-08-26 09:13:39 +10:00
Andrew Tridgell f8cfbb8062 HAL_ChibiOS: added ISR limit on I2C 
this will prevent any possibility of an I2C interrupt storm. This is
designed to address the most likely cause of #11642
 2019-08-25 17:12:16 +10:00
Andrew Tridgell 8080efbc6a HAL_ChibiOS: allow for blocking unbuffered uarts 
this is used by AP_IOMCU to avoid a race condition where the mutex is
busy on write() causing a zero-length write and delayed output
 2019-08-17 17:36:41 +10:00
Andrew Tridgell afc8a70ce4 HAL_ChibiOS: fixed a bug in wait_timeout() on UARTs 
wait_timeout() could return true on a read of less bytes than are
expected.
 2019-08-17 17:36:41 +10:00
Peter Barker 35c2406b17 AP_HAL_ChibiOS: add missing override keywords 
This was causing CubeOrange not to build
 2019-08-17 13:25:05 +10:00
Peter Barker 54b200a777 AP_HAL_ChibiOS: add missing uavcan-related override keywords 2019-08-14 16:33:29 +10:00
Andrew Tridgell 5e40921b42 HAL_ChibiOS: fixed reboot hold in bootloader 
thanks to Tom for noticing this
 2019-08-12 22:21:13 -07:00
Henry Wurzburg b6518b6b46 AP_HAL_ChiibOS: change omnibusf4 board type to be unique 2019-08-06 11:20:11 +10:00
Andrew Tridgell 4fca69c5e9 HAL_ChibiOS: renamed Pixhawk6 to Durandal 
new name for FC from Holybro
 2019-08-01 14:11:06 +10:00
Andrew Tridgell adcf9c4fa4 HAL_ChibiOS: added commented out baro on SPI5 for fmuv5 
useful for SPI debugging
 2019-07-29 10:09:08 +10:00
Andrew Tridgell 98f578394f HAL_ChibiOS: default OTG2 protocol to mavlink2 on most boards 
For boards that haven't yet had a driver update in MissionPlanner to
cope with the 2nd OTG interface this change makes both interfaces work
as MAVLink

This also fixes an issue with connecting under a windows VM within
vmware
 2019-07-26 21:58:57 +10:00
bugobliterator cba98096e9 HAL_ChibiOS: move to using hardcoded heater PWM polarity in iofirmware 2019-07-25 17:05:41 +10:00
Andrew Tridgell e57228646e HAL_ChibiOS: added unused CS pins for fmuv5 
these are needed to ensure SPI works correctly if the unused pins are
later attached to a device
 2019-07-19 16:58:10 +10:00
Andrew Tridgell 12dd33ac2b HAL_ChibiOS: added logging of hardware fault information in watchdog 
this may help trackdown software bugs that trigger hard faults
 2019-07-19 16:02:41 +10:00
Andrew Tridgell 2d5e4dcfa2 HAL_ChibiOS: fixed SemLine data in WDOG msg 
semline was being overwritten in the setup() call
 2019-07-15 08:08:54 +10:00
vierfuffzig bed92e8ca8 AP_HAL_ChibiOS: fix buzzer pin define on OMNIBUSF7V2 2019-07-13 17:26:43 +10:00
Andrew Tridgell 2f79639e36 HAL_ChibiOS: added support for MatekF765-Wing 2019-07-13 15:23:45 +10:00
reubenfinch cabd6aec8f AP_HAL_ChibiOS: Correct the README.md for fmuv5 boards 
the IST8310 magnetometer uses I2C, not SPI
 2019-07-12 10:59:48 +01:00
Andrew Tridgell 2f0a4ff1ab HAL_ChibiOS: fixed build on boards with less than max uarts 2019-07-12 17:01:21 +10:00
Andrew Tridgell 1919268801 HAL_ChibiOS: added OTG2 on all F7 and H7 boards with CAN 
allows for SLCAN on 2nd port
 2019-07-12 17:01:21 +10:00
Andrew Tridgell 02014776e8 HAL_ChibiOS: auto-set HAL_HAVE_DUAL_USB_CDC 2019-07-12 17:01:21 +10:00
Andrew Tridgell 0075b96f3a HAL_ChibiOS: added uartH 2019-07-12 17:01:21 +10:00
Siddharth Purohit dcf17e5bc2 HAL_ChibiOS: hwdef: add support for dual cdc on CubeYellow and CubeOrange 2019-07-12 17:01:21 +10:00
Siddharth Purohit 2f0d1336e6 HAL_ChibiOS: add support for dual usd cdc 2019-07-12 17:01:21 +10:00
anbello b65f5bf632 ChibiOS: hwdef revo-mini correct IMU rotation 2019-07-12 14:01:06 +10:00
Andrew Tridgell d2fe47d2e0 HAL_ChibiOS: dither heater pins to prevent magnetic impact 2019-07-12 12:46:27 +10:00
Andrew Tridgell b12cc57c64 HAL_ChibiOS: switched on fast sampling on IMU3 by default on hex cubes 
as some people are flying with EK2_IMU_MASK=7 this reduces the risk of
aliasing on IMU3
 2019-07-11 10:24:45 +10:00
Andrew Tridgell 3b0bd67afb HAL_ChibiOS: enable CAN on Pixhawk6 2019-07-08 12:19:20 +10:00
Siddharth Purohit 2f153a3577 HAL_ChibiOS: remove singleton interface from slcan_router 2019-07-08 12:18:29 +10:00
Siddharth Purohit 67c925865c HAL_ChibiOS: add support for CAN on STM32H7 boards 2019-07-08 12:18:29 +10:00
Peter Barker a61028c55d AP_HAL_ChibiOS: disable scripting if USE_FATFS=no 2019-07-08 09:55:46 +10:00
Andrew Tridgell 898150e460 HAL_ChibiOS: cope with calling delay_microseconds_boost() multiple times 
needed for updated IMU wait code
 2019-07-07 19:03:01 +10:00
Atxheli 7f3cb09da2 correct comment placement for second led 2019-07-04 08:36:33 +10:00
Hwurzburg a9783de61c correct include paths, uncomment alarm pin, fix conflict with rssi 2019-07-04 08:36:33 +10:00
Hwurzburg 3e3d7b8e7f Change to "include" style for new board, fix to allow LED to be used as status indicator 2019-07-04 08:36:33 +10:00
Hwurzburg 10838387c5 Split Omnibus F4 pro and non-pro into two boards to allow pro boards to have 8 pwm outputs 2019-07-04 08:36:33 +10:00
Alexey Kozin e5988f7153 AP_HAL_ChibiOS: fix voltage sensor connected to fmu adc 2019-07-02 06:42:11 +10:00
bugobliterator 7d4a758059 hwdef: fix default battery monitor pins for CubeOrange 2019-06-28 14:18:11 +10:00
Michael du Breuil a34ac14ec5 AP_HAL_ChibiOS: Make BOARD_FLASH_SIZE available at configure time 2019-06-18 00:06:32 -07:00
Peter Barker 1f4de871da AP_HAL_ChibiOS: return RC protocol being decoded 2019-06-18 11:35:38 +10:00
vierfuffzig 7780e8ed00 AP_HAL_ChibiOS: add support for AIO and OSD board types 
this allows init on board variant without onboard baro
 2019-06-18 10:10:22 +10:00
Andrew Tridgell 51e187342b HAL_ChibiOS: move the power control changes to be only CubeBlack 
This aims to fix #11455. I have been unable to reproduce the issue,
which leaves me thinking it is either a bootloader difference or a hw
difference between pixhawk1 clones and real pixhawk1 boards
 2019-06-09 16:56:14 +10:00
Siddharth Purohit a926effee5 hwdef: iomcu set pin mode to input for autodetecting heater control level 2019-06-08 14:31:01 +10:00
Lucas De Marchi e66de36016 HAL_ChibiOS: fix I2C transaction without stop condition 
Start using i2cSoftStop() instead of i2cStop() so the peripheral
continues to be enabled and with non-gated clock.  This allows time for
the I2C peripheral to continue the ack or stop.
 2019-06-06 09:27:47 -07:00
Andrew Tridgell 73bc277470 HAL_ChibiOS: fixed KakuteF7 build 
low on flash
 2019-06-06 12:19:13 +10:00
Andrew Tridgell 2acaada884 HAL_ChibiOS: fixed OMNIBUSF7V2 build 
ran out of flash for plane
 2019-06-06 12:19:13 +10:00
Andrew Tridgell bfdf857b34 HAL_ChibiOS: fixed airbotf4 build 2019-06-06 12:19:13 +10:00
Andrew Tridgell 614a059819 HAL_ChibiOS: convert more boards to using new sensor config system 2019-06-05 18:54:40 +10:00
Andrew Tridgell ff603a1f0b HAL_ChibiOS: convert mini-pix 2019-05-30 15:39:57 +10:00
Andrew Tridgell 4548aa162b HAL_ChibiOS: convert mindpx-v2 2019-05-30 15:39:57 +10:00
Andrew Tridgell 91aa49ba6f HAL_ChibiOS: convert matek boards 2019-05-30 15:39:57 +10:00
Andrew Tridgell fca03bef8d HAL_ChibiOS: convert F4BY 2019-05-30 15:39:57 +10:00
Andrew Tridgell 8605060dfc HAL_ChibiOS: convert F35Lightning 2019-05-30 15:39:57 +10:00
Andrew Tridgell 288d5d6fe6 HAL_ChibiOS: convert DrotekP3Pro 2019-05-30 15:39:57 +10:00
Andrew Tridgell d90b05f685 HAL_ChibiOS: convert all fmuv5 boards to sensor config system 2019-05-30 15:39:57 +10:00
Andrew Tridgell 03bb94599b HAL_ChibiOS: support I2C sensor probes by bus mask 2019-05-30 15:39:57 +10:00
Andrew Tridgell fc1ec8a465 HAL_ChibiOS: convert airbot to new config 2019-05-30 15:39:57 +10:00
Andrew Tridgell 82b171582e HAL_ChibiOS: added sensor config for cube varients 2019-05-30 15:39:57 +10:00
Andrew Tridgell c36d76c213 HAL_ChibiOS: convert Pixhawk1 to new sensor config 
saves 26k of flash, making 1M boards work for longer
 2019-05-30 15:39:57 +10:00
Andrew Tridgell eae852962e HAL_ChibiOS: fixed case of no IMU, BARO or COMPASS config settings 2019-05-30 15:39:57 +10:00
Andrew Tridgell 068e6ea8d2 HAL_ChibiOS: convert KakuteF4 and KakuteF7 to new sensor config 2019-05-30 15:39:57 +10:00
Andrew Tridgell 1b0bf88c8f HAL_ChibiOS: convert crazyflie2 to new config 2019-05-30 15:39:57 +10:00
Andrew Tridgell b47ab5c8a9 HAL_ChibiOS: support I2C sensor config in hwdef.dat 2019-05-30 15:39:57 +10:00
Andrew Tridgell ceb9c3b83e HAL_ChibiOS: convert mRoControlZeroF7 to new sensor config 2019-05-30 15:39:57 +10:00
Andrew Tridgell 5eb488303c HAL_ChibiOS: convert Pixracer to use new sensor config 2019-05-30 15:39:57 +10:00
Andrew Tridgell e198d552a8 HAL_ChibiOS: support IMU, COMPASS and BARO lines in hwdef.dat 
this allows for main sensors to be set in hwdef.dat, making adding new
boards simpler
 2019-05-30 15:39:57 +10:00
Phillip Kocmoud 734abe3d7d hwdef: Correct typo for mRo x2.1-777 USB PID 
This needed to match the firmware directory which contains the compiled binaries hosted at http://firmware.ardupilot.org so that MissionPlanner can automatically download and update firmware.
 2019-05-23 11:05:42 +10:00
Andrew Tridgell 59678840a8 HAL_ChibiOS: log SPI and I2C counters 2019-05-17 08:56:06 +10:00
Peter Barker f5190d1bcc AP_HAL_ChibiOS: use logger().WriteCritical(...) for WDOG message 2019-05-16 17:21:24 +10:00
Andrew Tridgell 0708b65c2d AP_HAL_ChibiOS: added const for PersistentData 2019-05-15 15:33:48 +10:00
Andrew Tridgell 48302427c7 HAL_ChibiOS: rename to EXPECT_DELAY_MS() 2019-05-15 15:33:48 +10:00
Andrew Tridgell a7eb85e1c5 HAL_ChibiOS: cope with nesting of expected_delay_ms() 2019-05-15 15:33:48 +10:00
Andrew Tridgell 8d0bca6ba9 HAL_ChibiOS: log mavlink IDs and semaphore lines for watchdog 
this gives a better chance of tracking down a hang
 2019-05-15 15:33:48 +10:00
Andrew Tridgell 1b8cbfc6a4 HAL_ChibiOS: use EXPECT_DELAY() macro 2019-05-15 15:33:48 +10:00
Andrew Tridgell d368d95aa7 HAL_ChibiOS: removed unusued AP_Common/Semaphore.h 2019-05-15 15:33:48 +10:00
Andrew Tridgell e3c80bf08f HAL_ChibiOS: fixed bootloader build 2019-05-15 15:33:48 +10:00
Andrew Tridgell d7a0eb42ee HAL_ChibiOS: added logging of watchdog data 
log MON msgs in the leadup to a watchdog, and log a WDOG message after
a watchdog reset
 2019-05-15 15:33:48 +10:00
Andrew Tridgell dbfe6b8019 HAL_ChibiOS: implement persistent_data for watchdog 
this is a much simpler approach to persistent data
 2019-05-15 15:33:48 +10:00
Andrew Tridgell 6333494d99 HAL_ChibiOS: disable peripheral power on boot on fmuv3 
then enable after 100ms, and let settle for 20ms. This is to fix an
issue with peripheral power on consistency with all fmuv3 boards

Thanks to Philip for the suggestion
 2019-05-11 18:45:18 +10:00
Andrew Tridgell ce9e9d8670 HAL_ChibiOS: end scheduler boost on expected delay 
we want timer thread to be higher priority than main thread while in a
long operation
 2019-05-11 05:56:34 +10:00
Phillip Kocmoud 16f1ec8ce2 HAL_ChibiOS: added missing AF functions for F777 2019-05-10 15:05:42 +10:00