Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
48,389 Commits 71 Branches 509 Tags 714 MiB
Commit Graph

5981 Commits

Author SHA1 Message Date
yaapu bb576a49b8 Tools: added autotest for frsky rpm telemetry 2021-02-03 12:49:38 +11:00
Michael du Breuil 15ce4fb034 AP_Periph: Use the ArmingStatus broadcast to set the soft_armed state 
This allows things like GPS_RAW_DATA 2 to start to work for SBF GPS's
 2021-02-02 10:57:57 +11:00
Samuel Tabor d1578e5ba2 autotest: Update soaring default params in line with specified SOAR_THML_BANK. 2021-01-29 11:20:09 -08:00
Andrew Tridgell 6bc4e995a4 CI: build CubeOrange-periph 
this ensures H7 based peripherals (which are getting more common)
don't break
 2021-01-27 18:24:03 +11:00
Pierre Kancir c02dfd1214 Autotest: add EndMissionBehavior Test for rover 2021-01-27 08:23:52 +09:00
Andrew Tridgell bb278a1cc7 Tools: allow tempcal_IMU.py to run without existing tcal params 
this makes it possible to run the tcal script on a log from a board
that doesn't have any existing temperature calibration params
 2021-01-27 09:49:35 +11:00
Pierre Kancir 2b71bf8e99 Autotest: fix subtests completion 2021-01-27 08:27:54 +11:00
Andrew Tridgell 49e2a0caed Tools: fixed valgrind errors with AP_Param::ParamToken 2021-01-26 10:43:09 +11:00
Andrew Tridgell d47afb2406 autotest: added AHRSTrim test and add trim to accel cal test 
this ensures the handling of AHRS trim is correct
 2021-01-25 16:24:50 +11:00
Andrew Tridgell 3c825bdffc waf: make AP_NavEKF3_core.h a vehicle dependent include 2021-01-24 11:56:52 +11:00
Peter Barker ad2ab333f9 Tools: autotest: allow autotest to connect directly to SITL 2021-01-24 09:25:45 +11:00
Peter Barker 8c7d63433c autotest: clear mission ourselves rather than with MAVProxy at end of test 2021-01-24 09:25:45 +11:00
Peter Barker 30836535d0 autotest: retry dynamic notch test up to 3 times 2021-01-22 11:17:42 +11:00
Pierre Kancir 805493c854 ardupilotwaf: use dynamic generation for ap_periph board name 2021-01-22 05:42:12 +11:00
Siddharth Purohit c54a597571 AP_Periph: pull out supported targets from wscript into a separate file 2021-01-22 05:42:12 +11:00
Peter Barker 2e2e34d784 autotest: correct run_one_test case (vehicle.testname case) 2021-01-21 22:59:34 +11:00
Peter Barker 1fec88af21 autotest: make arming test a little more verbose 2021-01-21 22:15:16 +11:00
Peter Barker 281296832a autotest: retry GyroFFTHarmonic test on failure 2021-01-21 16:45:34 +11:00
Peter Barker 3279400e2e autotest: disarm_with_rc_input shortcuts if it sees rudder-disarm-disabled 2021-01-21 14:25:47 +11:00
Peter Barker f452c6bb51 autotest: break out a statustext_in_collections method from wait_statustext 2021-01-21 14:25:47 +11:00
Andrew Tridgell 3add045924 autotest: fixed accel/gyro threshold consistency for tempcal 2021-01-21 13:09:21 +11:00
Andrew Tridgell fe7d933976 autotest: use delay_sim_time() in tempcal test 2021-01-21 13:09:21 +11:00
Andrew Tridgell af18e0c755 Tools: review fixes 2021-01-21 13:09:21 +11:00
Andrew Tridgell 58b9cd2c6e autotest: added assert_reach_imu_temperature() abstraction 2021-01-21 13:09:21 +11:00
Andrew Tridgell 5a5ba26468 autotest: expanded accelcal test to check values 
this checks the resulting accelcal is correct within 1%
 2021-01-21 13:09:21 +11:00
Andrew Tridgell 3e640eed80 autotest: changes for per-IMU biases and scaling 2021-01-21 13:09:21 +11:00
Andrew Tridgell c96e61c0e1 Tools: review fix 2021-01-21 13:09:21 +11:00
Andrew Tridgell 4c315b57ca autotest: run gyro/accel cal at non-reference temperature 2021-01-21 13:09:21 +11:00
Andrew Tridgell 5a180fa7a8 Tools: cope with offset from cal temp to reference temp 2021-01-21 13:09:21 +11:00
Andrew Tridgell 2359a5a1ea Tools: fixed stopping of capture on enable change in tempcal 2021-01-21 13:09:21 +11:00
Andrew Tridgell 2cf7e7945c autotest: make tempcal debug output clearer 2021-01-21 13:09:21 +11:00
Andrew Tridgell 6254787c26 Tools: fixed tempcal for when we have gyro cal but no accel cal 2021-01-21 13:09:21 +11:00
Andrew Tridgell e87dbacee7 Tools: switch to fixed reference temperature of 35C 2021-01-21 13:09:21 +11:00
Andrew Tridgell a96b6336b8 Tools: changes from review feedback 2021-01-21 13:09:21 +11:00
Andrew Tridgell 84dda13b42 autotest: use new learn param setup 2021-01-21 13:09:21 +11:00
Andrew Tridgell e8ab8ed29e Tools: improve tempcal script 
- allow display of log corrections
 - added online estimator
 - allow learning using TCLR records
 2021-01-21 13:09:21 +11:00
Andrew Tridgell 30385fb8cb autotest: use set_parameters() in IMU temp cal test 2021-01-21 13:09:21 +11:00
Andrew Tridgell 0c3655b01f autotest: fixed epsilon handling in set_parameters 2021-01-21 13:09:21 +11:00
Andrew Tridgell 327db46c15 autotest: added automatic testing of IMU Temperature calibration 2021-01-21 13:09:21 +11:00
Andrew Tridgell c4664d8e32 Tools: added script to calculate IMU temp compensation parameters 
this is run over an onboard log to calculate the INS_TCAL parameters
to enable temperature compensation for gyro and accel
 2021-01-21 13:09:21 +11:00
Peter Barker c7a6047904 autotest: add option to retry tests / create and use Test definition object 2021-01-21 10:23:17 +11:00
Peter Barker 03b2473c61 autotest: correct get_parameter_direct attempts decrement 2021-01-20 20:06:46 +11:00
bugobliterator 9e15b5785b ardupilotwaf: fix spec args as distcc doesn't like it 2021-01-20 19:21:14 +11:00
Andrew Tridgell 7e89c05204 autotest: fixed --tracker option to sim_vehicle.py 2021-01-20 11:11:47 +11:00
Andrew Tridgell bd9dd7ff4c Tools: added vnav linux target 2021-01-20 10:06:45 +11:00
Andrew Tridgell c396d15890 Revert "autotest: ensure defaults files don't set already-default-values" 
This reverts commit 3d431cd4f1.

It breaks MissionPlanner SITL. We can re-apply once MissionPlanner
copes with external_model.
 2021-01-20 08:54:43 +11:00
Peter Barker 04a52835c0 autotest: correct Rover set-position-target-global-int test 
The vehicles doesn't send us set messages!
 2021-01-19 21:16:39 +11:00
Peter Barker 1cb86303b4 Tools: add test for maxbotixi2cxl 2021-01-19 11:20:47 +11:00
Iampete1 5e00f5ae48 Tools: ardupilotwaf: ap_library: add genrated bindings to whitle list and add support for ends with whitle listing 2021-01-19 11:18:10 +11:00
Iampete1 8d7299d052 Tools: ardupilotwaf: ap_library.py: allow vehicle in build/ 2021-01-19 11:18:10 +11:00
Peter Barker 8eb670d685 autotest: trim default values from rover defaults files 2021-01-19 10:34:00 +11:00
Peter Barker 3d431cd4f1 autotest: ensure defaults files don't set already-default-values 
autotest: mark some vehicles as having external physics models

autotest: add default_params_filename to some vehicle info
 2021-01-19 10:34:00 +11:00
Peter Barker 7d86cc08ad autotest: correct SITL commandline for no default parameter file 2021-01-19 10:34:00 +11:00
Peter Barker 8f9d3909f1 autotest: model_defaults_filepath always returns a list 2021-01-19 10:34:00 +11:00
André 30eed3103b sim_vehicle fix 2021-01-19 06:30:12 +11:00
Peter Barker 210b0e7c5f autotest: stop emitting port 14550 all the time 
this can confuse other things going on on the same machine.  It is still
available by specifying --viewerip if desired
 2021-01-18 21:46:43 +11:00
Peter Barker 30929e7f1a autotest: add verbose option to assert_sensor_state 2021-01-18 21:25:58 +11:00
Peter Barker 2c0e3751a9 autotest: reboot after moving from EKF type 10 to EKF type 2 
Bad things happen with home set but origin not
 2021-01-18 20:48:11 +11:00
Peter Barker 662e86780b autotest: reduce motor vibration for landing 2021-01-18 20:14:08 +11:00
Peter Barker 6becd90df0 autotest: increase timeout on DO_CHANGE_SPEED test 2021-01-18 19:08:46 +11:00
Peter Barker 5848ff7512 autotest: eliminate race condition in plane fence static test 2021-01-18 16:32:21 +11:00
Peter Barker e9c6c08a97 autotest: remove 'make' compatability from sim_vehicle 2021-01-18 16:24:09 +11:00
Peter Barker 6865649b9b autotest: tidy and correct ekf lane switching test 2021-01-18 15:19:39 +11:00
Peter Barker ba1973d343 autotest: parse messages when setting parameters 
This breaks some tests which are waiting on statustexts while setting
parameters
 2021-01-18 15:19:39 +11:00
Peter Barker 48a38f3ee2 autotest: wait for GPS fix before installing position validation handling 2021-01-18 15:11:19 +11:00
Peter Barker 2d62fb99b1 autotest: force-disarm copter before reboot in GCS failsafe tests 2021-01-18 14:17:32 +11:00
Andrew Tridgell d9de0ef649 autotest: added copter-bfx params 2021-01-17 12:25:47 +11:00
Randy Mackay b18e5966f7 Tools: fixes from peer review as AHRS default changed to EKF3 2021-01-16 08:24:23 +09:00
Randy Mackay 2f51b59de4 Tools: copter test parameter validation waits 10sec before starting 
This allows the GPS driver to initialise which avoids an EKF3 source requires GPS failure
 2021-01-16 08:24:23 +09:00
Randy Mackay bb926a2976 Tools: autotest fly_gyro_fft disables EKF2 and EKF3 
fly_gyro_fft_harmonic also disables EKF2 and EKF3
 2021-01-16 08:24:23 +09:00
Randy Mackay f9e7d59756 Tools: Copter.ArmFeatures fixups for EKF3 
changed to disable the simulated GPS instead of disabling the driver
expected EKF flags are slightly different
 2021-01-16 08:24:23 +09:00
Randy Mackay 9c56b406be Tools: Copter.AltEstimation fixes 
disable baro so EKF has no altitude estimate
add check that mode change to ALT_HOLD failed
 2021-01-16 08:24:23 +09:00
Randy Mackay 1f8b48e8f7 Tools: common autotest spelling fix 
reach should be reached
 2021-01-16 08:24:23 +09:00
Randy Mackay f68f26e75d Tools: Copter.VisionPosition config for EKF3 2021-01-16 08:24:23 +09:00
Randy Mackay d2bdc949b2 Tools: Copter.OpticalFlowLimits checks altitude 2021-01-16 08:24:23 +09:00
Randy Mackay 0ba696f761 Tools: Copter.OpticalFlowLimits config for EKF2/3 2021-01-16 08:24:23 +09:00
Randy Mackay d00194c60a Tools: copter test_rangefinder_switchover config for EKF2/3 2021-01-16 08:24:23 +09:00
Randy Mackay bd8b85d1e5 Tools: remove ekf2 enable from copter defaults 2021-01-16 08:24:23 +09:00
Peter Barker cd8a393ac2 autotest: create own RC thread to handle setting of RC overrides 
autotest: prevent method-on-undef problem in case of early test failure

autotest: plumb MAVProxy rc input back in for switch test

autotest: close off rc thread in case of timeout
 2021-01-15 20:56:30 +11:00
Randy Mackay d02a61a65d Tools: default parameters for hexsoon td860 2021-01-14 13:13:32 +09:00
nkruzan c0e4ef4219 Tools: vagrant: update path to CMAC-circuit.txt 2021-01-14 11:34:10 +11:00
Jacob Walser e235c379bf Frame_params: rename bluerov2 4.0 firmware defaults files 
These files apply to 4.0.0...4.0.2, not only 4.0.2
 2021-01-13 12:50:28 -05:00
Peter Barker 1dad0ecb46 autotest: disarm vehicle in case vibration test excepts 2021-01-13 19:46:13 +11:00
Peter Barker 47aea5f44c autotest: print stack traces for caught exceptions 2021-01-13 19:46:13 +11:00
Pierre Kancir fc0e2fec6b Tools: add caching for --target= completion that is long 2021-01-13 19:20:57 +11:00
Andy Piper a07cbc8706 Tools: BeastF7 bootloader 
add BeastH7/BeastF7 to builds
update BeastF7 bootloader
 2021-01-13 18:09:33 +11:00
Peter Barker e85e6d3375 autotest: use new set_parameters in place of many set_parameter calls 
autotest: use set_parameters for applying from parameter file

autotest: use set_parameters in place of many set_parameter calls
 2021-01-13 15:09:29 +11:00
Peter Barker 2917c75f35 autotest: add option to timeout parameter fetching in system time 2021-01-13 15:09:29 +11:00
Peter Barker 83f2f365c0 autotest: implement a more efficient set_parameters, implement set_parameter in terms of it 2021-01-13 15:09:29 +11:00
Peter Barker f478666700 autotest: correct scripting test for missing message 
The message could pass us by
 2021-01-13 12:24:17 +11:00
Peter Barker 8497f8fc73 autotest: correct some timeout issues around Copter takeoff 2021-01-13 12:24:17 +11:00
Peter Barker 0a39c49711 autotest: gpstovicon: reboot after setting new EKF type rather than before 2021-01-13 12:24:17 +11:00
Peter Barker 252b166099 autotest: reboot after Copter gyrofft test 
Really weird things happen if you switch from EKF2 to EKF10 - like your
home position being set but your origin not!
 2021-01-13 12:24:17 +11:00
Peter Barker e7aefc7fe4 autotest: make polling home position quiet by default 2021-01-13 12:24:17 +11:00
Peter Barker 5318538182 autotest: reboot SITL when moving from EKF10 to EKF2 in mag test 
Bad things happen when moving from one to the other...
 2021-01-13 12:24:17 +11:00
Peter Barker 987466bc3d autotest: increase timeout on avoidance-corners test 
Race conditions can mean angles are less than expected
 2021-01-13 12:24:17 +11:00
Peter Barker fdb5b5e6d6 autotest: correct dataflash transfer test for long periods 
This came in with a 35 second delay, which is rather spectacular given
the 5 second loop it is in.

2021-01-11T11:54:30.3046835Z dataflash_logger status
2021-01-11T11:54:30.3047406Z MANUAL> DFLogger: Active Rate(35s):408.788kB/s Block:65034 Missing:0 Fixed:0 Abandoned:0
2021-01-11T11:54:30.3048195Z Timed out looking for Active Rate\([0-9]s\):([0-9]+[.][0-9]+)
2021-01-11T11:54:30.3048801Z AT-0472.3: Exception caught: 60
 2021-01-13 12:24:17 +11:00
Willian Galvani 9020c79677 Tools: Frame_params: Sub: fix parameter types 
These files are consumed by QGroundControl. This means integers
should not have a decimal point.
 2021-01-12 11:44:25 -08:00
Peter Barker 3a264e0a76 autotest: use LOG_STRUCTURE_FROM as key string (don't need library name) 2021-01-12 17:44:24 +11:00
Pierre Kancir 409177d22a Tools: remove duplicate kg/m.m 2021-01-12 10:21:55 +11:00
Josh Henderson 0052e4d528 Tools: auotest add LOG_STRUCTURE_FROM_AHRS 2021-01-12 10:13:22 +11:00
Mirko Denecke d08487b8ae AP_Periph: fix command to build bootloader 2021-01-11 12:27:44 -08:00
Andrew Tridgell faae0a8609 Tools: added support for v3 Invensense sensors 
starting with ICM-40609, ICM-42688 and ICM-42605
 2021-01-11 14:43:35 +11:00
Peter Barker 4d19ff6b26 autotest: prompt ArduPilot for SYSTEM_TIME message during reboot 
This helps us actually execute the timeouts appropriately and thus
re-fetch the STAT_BOOTCNT parameter we use for detecting the reboot

Eliminates annoying pauses during testing.
 2021-01-09 16:20:12 +11:00
Peter Barker 8e6d144d72 autotest: re-raise KeyboardInterrupt after closing pexpects 
this gives a stack trace, which is handy if the tests get caught
indefinitely somewhere
 2021-01-09 15:16:50 +11:00
Peter Barker 5120ebf2f6 autotest: add a set_parameters method 2021-01-08 23:51:33 +11:00
Jacob Walser c5ec0cfdee Frame_params: (BlueRov2/Sub-3.5.1) revert to 19086e34 
this file is targeted specifically at 3.5.1 firmware
the subsequent contributions reflecting changes to master should
not have been applied
 2021-01-07 07:39:59 -08:00
Jacob Walser 4c13a5ae4f Frame_params: (BlueRov2 Heavy/Sub-3.5.2) revert to 9897ff60 
this file is targeted specifically at 3.5.2 firmware
the subsequent contributions reflecting changes to master should
not have been applied
 2021-01-07 07:39:59 -08:00
Jacob Walser 567c6d4991 Frame_params: (BlueRov2/Sub-3.5.2) revert to 83bb1e7f 
this file is targeted specifically at 3.5.2 firmware
the subsequent contributions reflecting changes to master should
not have been applied
 2021-01-07 07:39:59 -08:00
Jacob Walser 367e7b35de Frame_params: add defaults for bluerov2 on Sub 3.5.4 firmware 2021-01-07 07:39:59 -08:00
Jacob Walser 3ce9d9eb44 Frame_params: add defaults for bluerov2 on Sub 4.0.2 firmware 2021-01-07 07:39:59 -08:00
Andrew Tridgell ad29be14c6 autotest: added ARACE_hand location 2021-01-07 18:42:33 +11:00
Peter Barker 4fb4beab67 Tools: adjust decode_watchdog.py for new message format 2021-01-07 17:06:09 +11:00
Peter Barker 7474948971 autotest: add test for mavlink rangefinder out-of-range-low 2021-01-06 15:33:41 +11:00
Peter Barker fdd0297f12 autotest: add more tests for MAVLink rangefinder 
Allows for finer-grain control over what messages we're sending.
 2021-01-06 15:33:41 +11:00
Andrew Tridgell ae6569ab67 AP_Periph: updated release notes for 1.2.0 2021-01-06 07:59:33 +11:00
Andrew Tridgell 7672f0a2ce autotest: added NDRCC field 2021-01-05 21:13:12 +11:00
Andrew Tridgell b5476c6e5c autotest: added ExternalAHRS test 2021-01-05 21:13:12 +11:00
Andrew Tridgell 53e56d2933 Tools: added SERIAL for decode_devid 2021-01-05 21:13:12 +11:00
Andrew Tridgell 5840d24ed9 Tools: build AP_ExternalAHRS 2021-01-05 21:13:12 +11:00
Peter Barker 487f36146d Tools: add support for simulated TSYS01 temperature sensor 2021-01-05 12:01:51 +11:00
Peter Barker 6433647d9e autotest: add trivial autotest for TSYS01 temperature 2021-01-05 12:01:51 +11:00
Randy Mackay 66b2b988c4 Tools: update gps-vicon switching test params 2021-01-05 10:58:06 +11:00
Andrew Tridgell 90b8893b4a Tools: removed dependency on genromfs and cmake 
we don't need these any more
thanks to James for noticing
 2021-01-05 10:18:35 +11:00
Peter Barker 2240a60e20 autotest: add trivial test for set-position-target-local-ned 2021-01-05 08:13:02 +09:00
Peter Barker 53336595e1 autotest: add simple test for Rover set_attitude_target handling 2021-01-05 08:13:02 +09:00
auturgy 1c4873cece Tools: build_autotest.sh update email address 
drones_discuss is well obsolete.  I've used ardupilot.devel@google.com for now although we could do better, or simply choose not to emit spam.
 2021-01-04 14:41:43 +11:00
Tom Pittenger ee573a0275 AP_Periph: add NTF (Notify) full library and it's params 2021-01-03 16:24:12 -08:00
Pierre Kancir 61d1f747ba Tools: completion: bash better completion for binaries 2021-01-03 12:33:25 +11:00
Pierre Kancir d52c69af81 Tools: completion: bash better completions for sim_vehicle.py 2021-01-03 12:33:25 +11:00
Pierre Kancir bee767a9aa Tools: completion: better completion for waf 2021-01-03 12:33:25 +11:00
Pierre Kancir 60f2e119a5 Tools: completion: bash complete subtest on autotest.py 2021-01-03 12:33:25 +11:00
Pierre Kancir 5f033a551a Tools: completion: add --target completion 2021-01-03 12:33:25 +11:00
hendjosh 7f999ef64a Tools: Change Cygwin default install location to Cygwin64 2021-01-03 09:49:05 +11:00
Peter Barker f1067eee81 Tools: build_ci.sh: re-add KakuteF7Mini for bidir d-shot testing 2021-01-02 22:40:40 +11:00
Andy Piper f702288ad2 autotest: correct number of logs 2021-01-02 22:30:08 +11:00
Andrew Tridgell 529bc6b77c autotest: fixed compatibility with python on wiki server 2021-01-02 16:34:29 +11:00
Hwurzburg f0954f35a7 Tools: change KakuteF7Mini build to KakuteF7 to get biggest flash 2021-01-02 15:55:25 +11:00
auturgy 3b7207a5e4 Tools: Update board_types.txt 
Cross-alignment with PX4, plus whitespace fixes
 2021-01-01 17:31:44 +11:00
Andrew Tridgell eaf7e7354a Tools: added locations.txt to ROMFS for SITL 2021-01-01 17:30:32 +11:00
Andrew Tridgell 19e597ec3f AP_Periph: check for null uart in msp 2021-01-01 15:40:13 +11:00
Andrew Tridgell 37506c2f3a AP_Periph: added MSP_PORT parameter 
allows MSP to be enabled/disabled
 2021-01-01 15:40:13 +11:00
David B. Bitton 8b2e69162d AP_Periph: add support for Toshiba LED 2020-12-31 11:02:10 -08:00
Peter Barker 65cffdad5a autotest: print stack traces when exceptions caught 2020-12-31 17:43:23 +11:00
Peter Barker 38ea62c5d7 autotest: send mode change messages directly rather than via MAVProxy 2020-12-31 17:43:06 +11:00
Peter Barker d31f676c33 autotest: don't use MAVProxy for uploading using fencepoint protocol 2020-12-31 17:42:50 +11:00
Peter Barker 2b06ae9aa0 autotest: create and use a wait_sensor_state method 2020-12-31 17:42:33 +11:00
Peter Barker 7c7fb67829 autotest: fixes for AFS test 2020-12-31 17:42:20 +11:00
Peter Barker 7f79ddf3ff autotest: CRSF: remove pointless wait-ready-to-arm 2020-12-31 17:42:06 +11:00
Peter Barker 6c48a38497 autotest: avoid zero-byte-read on log download 2020-12-31 17:39:53 +11:00
Peter Barker 6908a776fa autotest.py: timeout after 5400 seconds 2020-12-31 14:55:32 +11:00
Peter Barker 8abf9a82f3 autotest: reliability improvements for EKF failover tests 2020-12-31 14:49:25 +11:00
Andrew Tridgell 939d8509b2 autotest: added ARACE flight locations 2020-12-30 12:33:58 -08:00
Andy Piper b5688c023c Tools: add KakuteFMini to CI f7 build to test bi-directional dshot 2020-12-30 19:14:16 +11:00
Pierre Kancir 69fab70582 Tools: use lxml for xml generation 
fix caracters
fix indentation
validate xml
 2020-12-30 18:19:43 +11:00
Andy Piper efb2e9f81a Tools: bootloader for iFlight Beast H7 AIO 2020-12-30 18:13:03 +11:00
Tom Pittenger 6bb2bec4f3 AP_Bootloader: add boardIDs for CubeORange/Black-periph, pixracer-periph 2020-12-29 07:52:39 -07:00
ukmook 44ce2b225c Tools/bootloaders: add Pixracer-periph bootloader image 2020-12-29 07:52:39 -07:00
Peter Barker 12505c4c28 autotest: add tests for new higher-channel override semantics 2020-12-29 15:03:34 +11:00
Peter Barker b53b30ea51 autotest: split out a get_rc_channel_value() 2020-12-29 15:03:34 +11:00
Tom Pittenger 71859c9893 AP_Periph: rename AP_PERIPH_<feature>_DEFAULT to HAL_PERIPH_<feature>_DEFAULT 2020-12-28 09:16:02 +11:00
Andrew Tridgell 80b3c2491f Tools: rebuild IO firmware 2020-12-28 08:27:23 +11:00
Tom Pittenger 7af731fbda AP_Periph: change GPS and Rangefinder to use port stored in param 2020-12-25 16:24:50 -07:00
Tom Pittenger 4c484c8577 AP_Periph: compile-error fix for for hwdef with HAL_NO_ROMFS_SUPPORT 2020-12-25 16:24:50 -07:00
Peter Barker b02f0ee51f autotest: make Sub's setting of FS_GCS_ENABLE persist across wipes 2020-12-25 12:18:01 +11:00
Peter Barker 26bbedd777 autotest: remove un-needed parameter wipe after soaring test 2020-12-25 12:18:01 +11:00
Peter Barker 0a5eedb05a autotest: wipe and reinitialise parameters when resetting SITL commandline 
Should fix this scenario:
 - Plane soaring test uses different defaults file
 - soaring test sets a parameter away from default value
 - context pop sets it back to the value in the defaults file
 - it is now in permanent storage with the default found in the
different defaults file used by the soaring test
 - we finish running the soaring test an reset the SITL command line
back to default, with the old defaults file
 - we go on to running the next test.  At this point the value for that
parameter is the default in the defaults file used by the soaring test.

Something similar applies in the Callisto test.
 2020-12-25 12:18:01 +11:00
Peter Barker 0788b46374 autotest: add trivial test for Callisto 2020-12-25 12:18:01 +11:00
Peter Barker 5d23dc2314 autotest: avoid replicating enumeration value names from pymavlink 2020-12-24 00:22:52 +11:00
Pierre Kancir 06d6526ba6 Autotest: correct wait_distance_to_home comment 2020-12-24 00:22:52 +11:00
Pierre Kancir 824b9c1dc9 Autotest: add setpoint_target test for copter 2020-12-24 00:22:52 +11:00
Pierre Kancir 67533c3284 Autotest: add setpoint_target tests on rover 2020-12-24 00:22:52 +11:00
Pierre Kancir 6565309325 Autotest: add test_set_velocity_global_int tests 2020-12-24 00:22:52 +11:00
Pierre Kancir 10673122c0 Autotest: add test_set_position_global_int tests 2020-12-24 00:22:52 +11:00
Pierre Kancir 62a1fa1052 Autotest: add wait_speed_vector and wait yaw_speed functions 2020-12-24 00:22:52 +11:00
Pierre Kancir 0ca8e817d5 Autotest: wait_and_maintain add support of Vector3 2020-12-24 00:22:52 +11:00
Pierre Kancir dbaeb668f1 Autotest: add MAV_FRAME dictionary 2020-12-24 00:22:52 +11:00
Pierre Kancir 0bf7bd7f68 Autotest: add set_position mask to common.py 2020-12-24 00:22:52 +11:00
Pierre Kancir 60c6666941 Tools: ardupilotwaf: fix scripting inclusion on build_binaries.py 2020-12-23 22:52:52 +11:00
Peter Barker 662814d6bd autotest: reboot after running Copter vibe tests 
The EKF type (at the very least) requires a reboot to revert to its
original value.
 2020-12-22 23:51:54 +11:00
Peter Barker 69ef0937f4 autotest: add trivial test just to cover the Airspeed_DLVR code 2020-12-22 23:07:24 +11:00
Tom Pittenger eb3da385dd AP_Periph: gracefully handle PWM and Params during reboot and bot up as PWM safety on 2020-12-21 18:27:07 -08:00
Siddharth Purohit 4d91071e7e AP_Periph: ignore unused-function error for helper fix_float16() 2020-12-21 18:27:07 -08:00
Tom Pittenger 07aeab5c44 AP_Periph: add Servo OUT support 2020-12-21 18:27:07 -08:00
Iampete1 6f92e6298a Tools: add Kg/m.m to param units 2020-12-22 11:00:59 +11:00
giacomo892 c8d874676f AP_Periph: MSP fix last baro ms 2020-12-22 10:08:34 +11:00
Randy Mackay d964fa2307 Tools: fixup EKF source pre-arm test 
although setting COMPASS_USE/2/3 to zero disables the pre-arm for EK3_SRCx_YAW = 1 (Compass) the pre-arm still triggers if EK3_SRCx_YAW = 3 (External Compass Fallback)
 2020-12-21 16:56:38 +09:00
Andrew Tridgell ba78fecaaa autotest: added Kris location 
helps with testing missions from Kris in China
 2020-12-21 12:05:50 +11:00
Andrew Tridgell 0bf0fbe687 AP_Periph: prepare for 1.2beta2 2020-12-19 11:46:56 +11:00
Tom Pittenger 2a4fef73dd AP_Periph: change ADSB to use param ADSB_PORT instead of define 2020-12-17 23:24:04 -08:00
Tom Pittenger 84e578b3df AP_Bootloader: respect HAL_BOOTLOADER_TIMEOUT when CAN and SERIAL/USB is enabled 2020-12-18 16:35:57 +11:00
Tom Pittenger 5238f85091 AP_Periph: add BRD_SERIAL_NUM and append CAN_APP_NODE_NAME 2020-12-17 21:28:10 -08:00
Peter Barker 4efcf16005 autotest: correct number of bytes we expect to download 
We request a fixed number of bytes, which could be more or  less than the
log file size.
 2020-12-18 13:35:15 +11:00
Peter Barker 8e71e2505a autotest: correct lookup for most recent log file 2020-12-18 13:35:15 +11:00
Randy Mackay 50f9eee54c Tools: relax fly_guided_stop climb rate tolerance to 1cm/s 2020-12-18 08:32:21 +09:00
hendjosh 8567b829a6 Tools: add name to GIT_Test.txt 2020-12-18 09:04:32 +11:00
Mike R 81745b0e64 Tools: Add Goretovka (RF, Moscow region) location 2020-12-18 08:04:41 +11:00
Peter Barker 76b0b0429f autotest: add another example on bisect helper 2020-12-18 07:48:34 +11:00
Tom Pittenger a285a741df AP_Periph: implement HAL_PERIPH_ALLOW_MAVLINK_UART_OR_USB_REBOOT_CMD 2020-12-18 06:59:09 +11:00
Mouna 2763ce027e Tools: adding my name to GIT_Success 2020-12-16 20:28:09 +09:00
Pierre Kancir 7a2a60e65c Tools: rover: correct test_setting_modes_via_mavproxy_switch for RTL and AUTO 2020-12-16 17:27:07 +09:00
Pierre Kancir 871b9fc12d Tools: plane : initial_mode_switch_mode 2020-12-16 17:27:07 +09:00
Pierre Kancir e4707c20ea Tools: rover: add initial_mode_switch_mode 2020-12-16 17:27:07 +09:00
Pierre Kancir 9550721ae4 Tools: add initial_mode testing 2020-12-16 17:27:07 +09:00
Sebastian Witt fe8ccca9a9 Tools: Add Diatone MambaF405 MK2 2020-12-16 19:07:07 +11:00
Andrew Tridgell f10f7d971d Tools: added --vehicle-binary to sim_vehicle.py 
this is useful for using a pre-built binary
 2020-12-16 08:45:11 +11:00
Pierre Kancir 7d88d104b8 Tools: put Rover SlewRate test on disable list for now 2020-12-16 08:25:52 +11:00
Andrew Tridgell 087eb8eeea Tools: rebuild CAN bootloaders for AP_Periph 2020-12-15 12:26:14 -08:00
Andrew Tridgell e0e4198358 AP_Bootloader: fixed can bootloader with old UAVCAN GUI tool 
the part that was failing was the write of the leading words. That
part is not actually needed in this bootloader as we use a CRC before
running, so remove it, which fixes the old windows GUI tool.

This also saves some memory and flash
 2020-12-15 12:26:14 -08:00
Dr.-Ing. Amilcar do Carmo Lucas fb8e1f4b9d Tools: Added support for 1/s and kg/m/m parameter units 2020-12-15 18:22:36 +11:00
Andrew Tridgell 23a9a14d64 Tools: convert to using hal.serial() instead of hal.uartX 2020-12-15 10:32:46 +11:00
Andrew Tridgell bab1bff2b9 Tools: added f303-M10070 bootloader 2020-12-14 16:31:03 +11:00
Andrew Tridgell 3cf71d11a9 AP_Periph: mark version as 1.3dev 2020-12-13 10:32:30 +11:00
Andrew Tridgell 52f66f3654 AP_Periph: updated release notes for 1.2.0beta1 2020-12-13 10:31:35 +11:00
Tom Pittenger 4b47ddf556 AP_Periph: add battery monitor to AP_Periph README 2020-12-13 09:35:28 +11:00
Phillip Kocmoud ce87b62dcc AP_Periph: Add alternate ordering of NCP5623 LED colors 2020-12-12 14:57:35 +11:00
Paul Riseborough 4cf78c34e7 Tools: Add autotest for copter wind estimation and baro correction 2020-12-11 15:21:41 +11:00
Paul Riseborough a3b5901218 autotest: Fix failing copter fly_square test 
This test should be flown in ALT_HOLD, not  STABILIZE as that is better mode to test the record waypoint function becasue it removes the need to fine tune the RC3 value to match thrust/weight variation as the hover thrust is not learned fast enough at the start of the test.
 2020-12-11 15:21:41 +11:00
Paul Riseborough e835da41fa Tools: Define momentum drag 2020-12-11 15:21:41 +11:00
Andrew Tridgell 5fc68a1ce5 autotest: adjust for new baro SITL param names 2020-12-11 15:21:41 +11:00
Peter Barker 813723d0b7 autotest: add test for needing AHRS to be healthy to arm 2020-12-11 09:55:40 +11:00
Peter Barker 9ad2961664 autotest: allow regex for matching wait_statustext 2020-12-11 07:35:02 +11:00
Peter Barker 50957fff89 Tools: autotest: bisect-helper.py can run autotest by name 2020-12-11 07:35:02 +11:00
Tom Pittenger 0c5cc16d7b AP_Periph: populate more fields in batteryinfo 2020-12-09 07:52:15 -08:00
Randy Mackay 9803a70d3f Tools: copter autotest spelling and format fixes 2020-12-09 19:30:48 +09:00
Randy Mackay 665e6ccdcb Tools: copter GCS fs tests explicitly set FS_GCS_ENABLE and FS_OPTIONS 2020-12-09 19:30:48 +09:00
Peter Barker 0406b28abd autotest: print exception if caught in test_alt_estimate_prearm 2020-12-09 18:06:18 +11:00
Peter Barker cecdc798ca autotest: present strings for unexpected results in run_cmd_get_ack 2020-12-09 14:09:44 +11:00
Andrew Tridgell 39c21e662d AP_Periph: check compass and baro health before using 2020-12-08 20:41:12 +11:00
Andrew Tridgell 74813e7761 AP_Periph: stop sending airspeed when unhealthy 2020-12-08 20:41:12 +11:00
giacomo892 75333dcd2f AP_Periph: support output of MSP airspeed sensor 2020-12-08 20:41:12 +11:00
Tom Pittenger f62a27ca8a Tools/AP_Bootloader: differentiate FAIL_REASON_BAD_LENGTH errors 2020-12-08 14:23:11 +11:00
Andrew Tridgell d0c1fd701f AP_Periph: prevent loop stuck internal error in AP_Periph bootloader flash 2020-12-08 13:22:36 +11:00
Andrew Tridgell c6548cc1b9 autotest: fixed use of GND prefix 2020-12-08 13:22:17 +11:00
Andrew Tridgell 3f6fd49507 Replay: rename baro params to BARO* 2020-12-08 13:22:17 +11:00
Andrew Tridgell dde940380f Tools: update param files to not reference GND parameters 2020-12-08 13:22:17 +11:00
Andrew Tridgell cd2f2f96eb rename barometer parameters to BARO prefix 2020-12-08 13:22:17 +11:00
murata 59445674e7 scripts: Support for decacopters 2020-12-08 11:59:10 +11:00
murata 690d64d664 LogAnalyzer: Support for decacopters 2020-12-08 11:59:10 +11:00
murata 2d55c2c42f pysim: Support for decacopters 2020-12-08 11:59:10 +11:00
murata a46333eff5 Tools: Support for decacopters 2020-12-08 11:59:10 +11:00
Peter Barker 768e3e7931 autotest: adjust Vicon test for new PREARM-checking code 
The new check that the prearms-passing bit from the autopilot
indicated prearms have passed was failing here because the yaw isn't
alighed until we frob channel 7.

The intent of the prearm seems ot have been to ensure we can get a
global position - that can be accomplished by polling the home position.
 2020-12-07 11:21:30 +11:00
Peter Barker 9207bd8a8a autotest: remove armability check from compass calibration test 
The new prearm-checking code has shown that we're not actually armable
after all!

Even the new prearm bit won't tell you if you can arm - you have to arm
to test that!
 2020-12-07 11:21:30 +11:00
Peter Barker 087300749c autotest: ensure we have position without being armable for compass cal check 2020-12-07 11:21:30 +11:00
Peter Barker 38e324f141 autotest: do not check prearm bit in dataflash-over-mavlink 
We won't be armable - but the other checks we make will ensure we get
the error we are looking for

Also use a more reliable way of draining the data from the autopilot
 2020-12-07 11:21:30 +11:00
Peter Barker 5707d8ecc0 autotest: check new MAV_SYS_STATUS_PREARM_CHECK in wait_ready_to_arm 2020-12-07 11:21:30 +11:00
Andrew Tridgell 97cbf17d01 Tools: added HitecMosaic to autobuild 2020-12-06 16:48:08 +11:00
Andrew Tridgell cb34025fef Tools: added HitecMosaic bootloader 2020-12-06 16:48:08 +11:00
Andrew Tridgell 9fa60be1ba AP_Periph: break out node status send 2020-12-06 16:48:08 +11:00
Andrew Tridgell 6ce9207394 AP_Periph: set HitecMosaic as AP_Periph target 2020-12-06 16:48:08 +11:00
Peter Barker be52e642f7 autotest: adjust Replay gps bit to make final logfile replayable 2020-12-03 17:28:26 +11:00
Peter Barker d0236ceac9 Replay: check_replay_branch.py: inspect all logs for replayability 2020-12-03 17:28:26 +11:00
Randy Mackay 28e769a79e Tools: link AP_WheelEncoder for all vehicles 2020-12-01 14:01:17 +09:00
Andrew Tridgell 0c2770a8d4 AP_Periph: added DEBUG parameter for displaying stack usage 2020-12-01 11:14:50 +11:00
Andrew Tridgell d586a2d853 AP_Periph: added magic FLASH_BOOTLOADER=42/43 values 
when FLASH_BOOTLOADER=42 we will enter into a lockup loop, which will
trigger a watchdog. This is useful for testing watchdog support
 2020-12-01 11:14:50 +11:00
Peter Barker ba0367fa9f Replay: add check_replay_branch.py to check for EKF output changes 
Create a replay log using master branch.
Check out a specified branch, compile and run Replay against replay log
Run check_replay.py over the produced log
 2020-12-01 10:40:09 +11:00
Peter Barker 8d756d8758 Replay: check_replay.py: default to print for progress function 2020-12-01 10:40:09 +11:00
Andrew Tridgell 4e4a044d5d Tools: removed inhibitGps and inhibitGpsVertVel options 
these were unused
 2020-12-01 10:33:50 +11:00
Peter Barker 17f806cdb9 autotest: add test for execution of button-bound functions 2020-12-01 10:06:57 +11:00
Peter Barker 12f001066b autotest: split out a wait_armed function 2020-12-01 10:06:57 +11:00
Peter Barker 211cd5255d autotest: tweak beacon test to be replay-friendly 2020-11-30 18:50:24 +11:00
Peter Barker 498b0b79a3 autotest: Replay tests OpticalFlow and Beacons 
autotest: run Replay on log generated by test.Copter.BeaconPosition

autotest: test OpticalFlow in replay tests
 2020-11-30 18:50:24 +11:00
Tom Pittenger 58c7f8279d Tools/autotest: fix CI by updating new ADSB_ENABLE->ADSB_TYPE param name 2020-11-30 16:05:17 +11:00
Tom Pittenger 2218f8292a Tools: remove ADSB param that is already default 2020-11-30 16:05:17 +11:00
Andrew Tridgell 895b9a34f9 Tools: support uartI, allowing a total of 9 uarts 
this allows for OTG2 on the MatekH743 board, which makes SLCAN much
easier
 2020-11-30 14:09:31 +11:00
Mehmet Recep Aşkar 31ebcdff75 Tools: added name to GIT_Success.txt 2020-11-30 08:28:54 +09:00
Pierre Kancir cd98129022 Autotest: fix css loading for autotest.ardupilot.org 2020-11-28 19:14:16 +11:00
Phillip Kocmoud 602388224b AP_Bootloader: Repurpose unused mRo board ID 2020-11-28 17:16:55 +11:00
Randy Mackay bce3c551e7 Tools: sub set-position-target-global-int sends target once 2020-11-27 10:52:17 +09:00
Randy Mackay d63fe1eb6c Tools: sub set-position-target uses negative altitude 2020-11-27 10:52:17 +09:00
Pierre Kancir 07ffac429b Tools: rover: add test for slew rate 2020-11-25 17:49:20 +09:00
Peter Barker ab95a1f8fd Tools: create a heading function to remove duplication 2020-11-25 18:51:43 +11:00
Peter Barker 8be13ac5db Tools: update instrall-prereqs-ubuntu for groovy 2020-11-25 18:51:43 +11:00
Peter Barker 9e20f4a68d autotest: add a test for compass yaw sources 2020-11-25 15:19:00 +11:00
Tom Pittenger cf2b3d9bc6 AP_Periph: add AP_BattMonitor support 2020-11-25 14:20:53 +11:00
Pierre Kancir 2e5a5cd43f Tools: correct comment on SITLtest-can 2020-11-25 10:10:03 +11:00
Andrew Tridgell 3366ee9496 Tools: fixed replay CI build 2020-11-24 20:46:37 +11:00
Peter Barker 3f6b398a01 autotest: include EK2,EK3 and DAL LogStructures in code-defined messages 2020-11-24 15:33:37 +11:00
Peter Barker b788a172c8 autotest: add simple test for IE24 generator 
Tools: Modified richenpower autotest setup

autotest: IE24: Add error code failsafe test
 2020-11-24 12:54:52 +11:00
Pierre Kancir 6534557832 Tools: fix replay build on build_ci.sh 2020-11-24 10:10:33 +11:00
Peter Barker 935d39322c autotest: correct test for mode-change-reason change 2020-11-24 10:09:37 +11:00
Randy Mackay f257dc20d0 Tools: add test.Copter.GPSViconSwitching to CopterTests1d 2020-11-20 16:43:44 +09:00
Randy Mackay b6fe039a9f Tools: autotest for beacon sets EK3_SRC params 2020-11-20 16:43:44 +09:00
Phillip Kocmoud ef80935173 Bootloader: Add bootloader for Pixracer Pro and Control Zero OEM H7 2020-11-18 18:28:24 +11:00
Phillip Kocmoud 701ab83f01 HAL_ChibiOS: Added support for mRo ControlZero OEM H7 flight controller 2020-11-18 18:28:24 +11:00
Andrew Tridgell ce95b7e81a waf: added --enable-memory-guard option 2020-11-18 17:14:43 +11:00
Andrew Tridgell 70a8853e6a Replay: adjust lost message threshold 
this needs to be a bit higher to cope with truncated logs (if SITL
ends in the middle of an EKF log write then we end up with a mismatch
in log msg counts)
 2020-11-18 14:56:19 +11:00
Andrew Tridgell 32bead6013 Replay: use common events and structures 
allows for --force-ekf2 and --force-ekf3 to run the other EKFs events
when needed
 2020-11-17 13:45:07 +11:00
Andrew Tridgell 1250f62c88 Replay: fix for WriteV usage and cleanup unused code 2020-11-16 10:28:43 +11:00
Andrew Tridgell e143257f8a Replay: added GSF msgs to check_replay.py 2020-11-16 10:28:43 +11:00
Andrew Tridgell e122d8ae8e Replay: allow build with "./waf replay" 
a bit easier to remember
 2020-11-16 10:28:43 +11:00
Tom Pittenger 3b6513b932 Tools: add CubeBlack to list of AP_Periph supported boards 2020-11-14 02:26:59 -08:00
Michael du Breuil 960437d446 Tools: Add the SFML configuration flags as needed for joysticks 2020-11-13 15:38:22 +11:00
Peter Barker 29b913cd41 autotest: avoid using undefined fmt variable 2020-11-12 21:00:04 +11:00
bugobliterator f502af99b2 AP_Periph: fix uninitialised buffer arrays 2020-11-11 19:52:37 +11:00
Peter Barker 55697a8f8e Tools: correct decoding of hex values in watchdog decoder 2020-11-11 19:27:49 +11:00
Peter Barker 58bdae1b52 autotest: get Valgrind closer-to-working 
This gets us past the reboot problem for the most part, where Valgrind doesn't like you exec'ing
 2020-11-11 18:22:58 +11:00
Andrew Tridgell 00cfc1932f autotest: fixed arm delay in replay test 
thanks to Peter
 2020-11-10 16:15:45 +11:00
Andrew Tridgell 2e60fbc6d3 waf: fixed headers check 2020-11-10 16:15:45 +11:00
Andrew Tridgell 7308384cdc Replay: require a filesystem for replay 2020-11-10 16:15:45 +11:00
Andrew Tridgell 20ecac5e9f Replay: fixed build on boards with OSD 2020-11-10 16:15:45 +11:00
Andrew Tridgell 5f669e22ff autotest: adjust optical flow speed test 2020-11-10 16:15:45 +11:00
Andrew Tridgell 4edc784dc4 Replay: allow replay on ChibiOS 2020-11-10 16:15:45 +11:00
Andrew Tridgell 1a1ca7cca7 autotest: fly a bit higher in optical flow test 
test was occasionally hitting the ground
 2020-11-10 16:15:45 +11:00
Andrew Tridgell 7568639af7 Replay: don't build on chibios 2020-11-10 16:15:45 +11:00
Andrew Tridgell 025cf8f72b autotest: cleanup load_local_module 2020-11-10 16:15:45 +11:00
Andrew Tridgell 0ca54016bb Replay: cleanup use of globals 2020-11-10 16:15:45 +11:00
Andrew Tridgell 690af580c9 autotest: abstract out load_local_module() 
this will be useful for other tests
 2020-11-10 16:15:45 +11:00
Andrew Tridgell f674d124d6 autotest: use SITL replay 2020-11-10 16:15:45 +11:00
Andrew Tridgell 85aa64780c Replay: allow replay to run on SITL instead of linux HAL 2020-11-10 16:15:45 +11:00
Andrew Tridgell 7b50780c5e autotest: fixed rmtree error in autotest 2020-11-10 16:15:45 +11:00
Andrew Tridgell a37cae5dae autotest: added test.Copter.Replay test 2020-11-10 16:15:45 +11:00
Andrew Tridgell f1f547f723 Replay: allow check_replay to be called as library 2020-11-10 16:15:45 +11:00
Andrew Tridgell 0d8a36d0c0 Replay: fixed linux build warning 2020-11-10 16:15:45 +11:00
Andrew Tridgell 3dff0b3d58 autotest: removed dcm yaw test 
this should not be part of replay PR
 2020-11-10 16:15:45 +11:00
Andrew Tridgell 541d11ee05 Replay: cleanup unused code 2020-11-10 16:15:45 +11:00
Andrew Tridgell fb4b149a73 travis: fixed for tools group for DAL standalone 2020-11-10 16:15:45 +11:00
Andrew Tridgell 367c993673 Replay: fixed cast of REY3 2020-11-10 16:15:45 +11:00
Andrew Tridgell e7fa722290 Replay: support overriding parameters 2020-11-10 16:15:45 +11:00
Andrew Tridgell 18e3c478f3 travis: added replay to travis build tests 2020-11-10 16:15:45 +11:00
Andrew Tridgell 403275beea autotest: added RBOH message 2020-11-10 16:15:45 +11:00
Andrew Tridgell 3d2f07e757 Replay: support body frame odometry 2020-11-10 16:15:45 +11:00
Andrew Tridgell 4a06641048 autotest: added RWOH message 2020-11-10 16:15:45 +11:00
Andrew Tridgell afb11cf29b Replay: support wheel odomotry 2020-11-10 16:15:45 +11:00
Andrew Tridgell 7f0113b82d autotest: added REPH and REVH 2020-11-10 16:15:45 +11:00
Andrew Tridgell 0ee8b415f2 Replay: support external position and velocity data 2020-11-10 16:15:45 +11:00
Andrew Tridgell ef5baaf482 autotest: added ROFH msg 2020-11-10 16:15:45 +11:00
Andrew Tridgell 1fb421ae6a Replay: handle optical flow 
and move frame processing to AP_DAL
 2020-11-10 16:15:45 +11:00
Andrew Tridgell 614a77d2c9 Replay: allow for early log end in check_replay.py 
when session is killed we can lose one frame worth of EKF msgs
 2020-11-10 16:15:45 +11:00
Andrew Tridgell 4cd5ac5164 Replay: add call to RFRF handler 2020-11-10 16:15:45 +11:00
Andrew Tridgell 8ba067608b autotest: cope with LogStructure.h in multiple places 
and allow for no docs in replay msgs
 2020-11-10 16:15:45 +11:00
Andrew Tridgell 09265a8a9b Replay: improved failure reporting in check_replay.py 2020-11-10 16:15:45 +11:00
Andrew Tridgell 42d62e138b Tools: updated test helpers to assist in replay testing 
Co-authored-by: Peter Barker <pbarker@barker.dropbear.id.au>
 2020-11-10 16:15:45 +11:00
Andrew Tridgell 3ae237b652 autotest: started work on replay testing 2020-11-10 16:15:45 +11:00
Andrew Tridgell 161f2a8d2f autotest: improved error msg for missing doc fields 
Co-authored-by: Peter Barker <pbarker@barker.dropbear.id.au>
 2020-11-10 16:15:45 +11:00
Andrew Tridgell 0c1d665818 waf: support no-gcs and DAL builds 2020-11-10 16:15:45 +11:00
Andrew Tridgell 81f96aedd2 Replay: new replay implemention 
this uses log msgs from AP_DAL to replay more accurately

Co-authored-by: Peter Barker <pbarker@barker.dropbear.id.au>
 2020-11-10 16:15:45 +11:00
Siddharth Purohit 87564f145b AP_Periph: add docs for CAN SITL 2020-11-09 19:37:00 +11:00
Peter Barker c786e3560c Tools: decode_watchdog.py: tool to decode watchdog information 2020-11-07 09:59:04 +11:00
Peter Barker b55838f7ff Tools: make decode-ICSR script an object 2020-11-07 09:59:04 +11:00
bugobliterator c1dc6465cf Tools: add CANGPSCopterMission mission file 2020-11-04 19:59:40 +11:00
bugobliterator c72c96fa9c Tools: setup CI test for CANBus 2020-11-04 19:59:40 +11:00
bugobliterator 60e8d747c6 AP_Periph: fix build type for SITL builds to use "sitl_*" 2020-11-04 19:59:40 +11:00
bugobliterator ed3683fce3 AP_Periph: use native_millis for use in SITL 2020-11-04 19:59:40 +11:00
bugobliterator 48b59973b5 waf: add sitl_gps support to simulate AP_Periph GPS 2020-11-04 19:59:40 +11:00
bugobliterator e4c5d7b697 AP_Periph: get AP_Periph ready for SITL build 2020-11-04 19:59:40 +11:00
PercyFung dce2f78d6f Update GIT_Success.txt 
add name
 2020-11-03 22:48:25 -08:00
Pierre Kancir fd0e822074 Tools: fix sqlite database creation 2020-10-29 13:07:26 +11:00
Andrew Tridgell 3e3da61396 Tools: fixes from review feedback 2020-10-28 14:20:44 +11:00
Andrew Tridgell 16bede2d74 Tools: allow for -f Callisto as frame type 
loads json and params
 2020-10-28 14:20:44 +11:00
Andrew Tridgell 39f25fc0f4 Tools: added models to ROMFS in SITL 2020-10-28 14:20:44 +11:00
Andrew Tridgell 31e3fd0771 Tools: added battery capacity to Callisto model 2020-10-28 14:20:44 +11:00
Andrew Tridgell 1286c5f64e Tools: adjust quadplane tuning and QAssist test 
fixed roll RTL and land in QAssist test
 2020-10-28 14:20:44 +11:00
Andrew Tridgell 47bf3e2249 Tools: use max_err for alt wait in flip test 2020-10-28 14:20:44 +11:00
Andrew Tridgell 7820b402d6 Tools: tweak Qassist test to be more reliable 
disabling stall prevention should help with travis
 2020-10-28 14:20:44 +11:00
Andrew Tridgell 72d0730194 Tools: fixed flow speed test to be much more robust 
takeoff in ALT_HOLD so we don't overshoot as much, and calculate speed
limit based on actual alt
 2020-10-28 14:20:44 +11:00
Andrew Tridgell eacebb619a Tools: lower ALT_HOLD_RTL for quadplanes 
this speeds up a number of tests that end with an RTL
 2020-10-28 14:20:44 +11:00
Andrew Tridgell 1ea0daa95f Tools: adjust quadplane tuning 
prevent oscillation
 2020-10-28 14:20:44 +11:00
Andrew Tridgell da86dc8814 Tools: fixed FFT test thresholds for new tune 2020-10-28 14:20:44 +11:00
Andrew Tridgell d221756e2d Tools: fixed copter MOT params 2020-10-28 14:20:44 +11:00
Andrew Tridgell c7a60f57ad Tools: improved quadplane tuning 
and shorten GyroFFT log msgs so values can be seen in log
 2020-10-28 14:20:44 +11:00
Andrew Tridgell a95c2e9db3 Tools: fixed optical flow speed limit 
should be 10m/s, as per comment
 2020-10-28 14:20:44 +11:00
Andrew Tridgell 86c558e735 Tools: fixed fast climb in SuperSimpleCircle test 
1700 makes us climb much too far
 2020-10-28 14:20:44 +11:00
Andrew Tridgell ca6da722a9 Tools: adjust StabilityPatch test 
fixed to account for use of propeller expo in model
 2020-10-28 14:20:44 +11:00
Andrew Tridgell 4e553bcbde Tools: fixed Qassist test 
it was using the wrong roll angle for recovery, and relied on poor
tuning of old model to overshoot by 20 degrees
 2020-10-28 14:20:44 +11:00
Andrew Tridgell 98dacd5ee4 Tools: fixed wait_for_alt 
should be a min alt. This is needed for Flip test to pass with new
model, as it doesn't lose as much height as the old model. So it
starts above the min alt
 2020-10-28 14:20:44 +11:00
Andrew Tridgell 10a07bf4f9 Tools: added Callisto model from Leonard 2020-10-28 14:20:44 +11:00
André ce839cfef9 Frame_params: updated Disco startup location 2020-10-26 23:32:45 -07:00
Peter Barker 18330d16de autotest: add test for MAVlite 2020-10-27 10:17:53 +11:00
Pierre Kancir 87d9beab4f Autotest: firmware page: fix html 2020-10-24 10:30:09 +11:00
Pierre Kancir 45a35f9470 Autotest: fix html and use class on CSS 2020-10-24 10:30:09 +11:00
Pierre Kancir 60805fdfa3 Autotest: anonimize IP on ga on autotest page 2020-10-24 10:30:09 +11:00
Pierre Kancir 05d365f1a6 Autotest: remove jdrone logo from firmware server 2020-10-24 10:30:09 +11:00
Pierre Kancir 4ca8f6bf1e Autotest: fix githash on python 3 for firmware html page 2020-10-24 10:30:09 +11:00
Pierre Kancir de927691f2 Tools: remove empty fields in autotest.ardupilot.org 2020-10-24 10:30:09 +11:00
Buzz 586e9f80d5 AutoTest: break copter autotests into smaller "under 10 minute" chunks to speedup github actions CI 2020-10-21 18:01:47 +11:00
Tristan Minifie 6d0a0ac564 Tools: added name to GIT_Success.txt 2020-10-20 17:17:25 +09:00
Mateusz Mróz 2e85ba6f51 AP_Periph: Restore setting node_id from CAN_NODE parameter 
Reverts part of commit: 584bcbac0d
 2020-10-20 14:32:43 +11:00
Patrick José Pereira cbc3384187 default_params: Sub: Add camera mount parameters 
Allow the usage of MOUNT_CONTROL in SITL

Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
 2020-10-19 16:25:38 -04:00
Peter Barker 937d7bf335 autotest: add quiet option to drain_mav 2020-10-15 16:31:41 +11:00
Peter Barker 49fd762f26 autotest: fix and re-enable button test 
A recent commit to fix the setting-of-pullup-resistors in SITL makes it
possible to re-enable this.

Closes #15259
 2020-10-15 08:34:08 +11:00
Phillip Kocmoud f2c63e13be AP_Bootloader: Add 3 new mRo board IDs 2020-10-15 08:33:27 +11:00
Peter Barker d865c8553c autotest: loosen takeoff check in heli takeoff to 1m 
On the basis that random noise can make it drift 10cm
 2020-10-14 12:49:23 +11:00
Andrew Tridgell 5822d7510c Tools: update bootloaders 2020-10-13 17:59:13 +11:00
Pierre Kancir dc8d42b12d Tools: expose option --sysid into sim_vehicle.py 2020-10-13 10:31:21 +11:00
Peter Barker 8f1e9ebc7f autotest: reset camera feedback rate if exception is raised 2020-10-12 13:48:15 +11:00
Peter Barker f9324d38c9 autotest: loosen groundspeed tolerance in guided-stop function 
Fixes current "Vehicle did not stop" problem
 2020-10-09 12:05:23 +11:00
Peter Barker b630aeeddf autotest: comment suspicious-looking latitude/longitude parameters 2020-10-08 17:23:09 +09:00
Peter Barker 750f1d4032 autotest: send position targets once 2020-10-08 17:22:29 +09:00
Peter Barker d13f6acc66 autotest: quieten mav draining 2020-10-08 17:21:35 +09:00
bugobliterator a348e342fa Tools: AP_Periph: add support for CubeBlack-periph 2020-10-08 09:31:35 +11:00
bugobliterator e49891d605 Tools: waf: remove extraneous frame-larger-than warning 2020-10-08 09:31:35 +11:00
Pierre Kancir 774c8583b1 Tools: make apm.pdef.xml more readable. 2020-10-07 19:38:14 +11:00
Patrick José Pereira 16469e703e Tools: Add firmware_version_decoder script 
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
 2020-10-07 19:32:12 +11:00
Andrew Tridgell 99170c3954 Tools: update IO firmware 2020-10-07 16:44:13 +11:00
Peter Barker 1d0735f206 autotest: add a poll_message method 2020-10-07 11:54:02 +11:00
Peter Barker 04633d7e1c autotest: if MODE_AUTO is disabled then we also need to disabled AFS 2020-10-06 11:25:09 +11:00
Peter Barker 8e8b396afe Tools: improve decode-ICSR formatting 2020-10-06 10:30:14 +11:00
Andrew Tridgell ad41098beb Tools: added bootloader for QuiTekZealot 2020-10-05 07:41:06 +11:00
QioTek 86100d6316 Tools: add auto build for QioTekZealotF427 2020-10-05 07:41:06 +11:00
Peter Barker 29775f310e Tools: flesh out decode-ICSR tool 2020-10-03 13:28:48 +10:00
giacomo892 4eeccb61cd WAF: Add AP_OLC to build 2020-10-01 09:40:45 +10:00
Pierre Kancir d0e885764d Tools: build_binaries_history.py: make size printing more pretty 2020-09-30 17:59:33 +10:00
Pierre Kancir ae29697504 Tools: build_summary: make binary path a string 2020-09-30 17:59:33 +10:00
QioTek da5da6b14e Tools: added Qiotek ZealotF427 board ID 
add board id for Qiotek ZealotF427
 2020-09-28 06:18:32 +10:00
Patrick José Pereira 27720f2235 Tools: Replay: Move from uint to uint32_t in MsgHandler 
uint is not a fundamental type and does not exist under cstdint

Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
 2020-09-26 20:28:18 +10:00
Samuel Tabor bd28a62155 autotest: Update soaring test for THERMAL mode. 2020-09-25 16:21:15 +10:00
Andrew Tridgell 246e790484 AP_Bootloader: use new hal CAN interface for CAN support 2020-09-24 12:32:19 +10:00
Siddharth Purohit 4bfd3c0782 AP_Bootloader: add support for HAL CANIface based bootloader 2020-09-24 12:32:19 +10:00
Siddharth Purohit 5ab6916a41 AP_Periph: use HAL CAN Drivers instead of ChibiOS's 2020-09-24 12:32:19 +10:00
Siddharth Purohit b8e3d9c6e8 AP_Bootloader: add fail reason bad length 2020-09-24 12:32:19 +10:00
Siddharth Purohit 2edcd852eb AP_Bootloader: add support for app start offset 2020-09-24 12:32:19 +10:00
Siddharth Purohit eab0507d37 Tools: waf: add build for CubeOrange-periph 2020-09-24 12:32:19 +10:00
Siddharth Purohit b27092c651 Tools: waf: don't do uavcan build config for AP_Periph 2020-09-24 12:32:19 +10:00
Samuel Tabor fe6c4d9290 autotest: Update for THERMAL mode. 2020-09-24 07:30:48 +10:00
Patrick José Pereira be4f2f0c79 AP_Periph: Use new AP_FWVersionDefine header 
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
 2020-09-23 20:58:35 +10:00
Peter Barker 536e2db947 Tools: sim_vehicle.py: add --disable-breakpoints commandline option 2020-09-23 20:28:08 +10:00
Peter Barker 64461dba5e autotest: fix Copter motortest test 
We were swallowing all of the rc output containing the values we were
looking for.

Rearrange so we don't swallow where we were, and increase timeout on the
basis that there's still a narrow race.
 2020-09-23 09:49:54 +10:00
Peter Barker 669622c614 autotest: improve use of SITL-is-running 
ATM if the SITL binary dies we don't catch it anywhere.  This might
become part of the solution for that, as well as some changes on
run_one_test.
 2020-09-22 21:11:57 +10:00
Peter Barker fdb31a6419 autotest: param_parse.py: validate @User field to be Standard or Avanced 2020-09-22 14:56:04 +10:00
Pierre Kancir b48d2d9631 Tools: remove empy from configure-ci.py 2020-09-22 10:05:19 +10:00
Tatsuya Yamaguchi 37691c751c Tools: replace message indicating that initialisation has completed 2020-09-22 09:52:52 +10:00
Andrew Tridgell 7726848a50 waf: lock in zero errors for gcc9 2020-09-22 08:07:23 +10:00
Randy Mackay 4ac6a647d7 Tools: add boogie-board-boat frame params 2020-09-18 08:30:54 +09:00
Vikas Singh 399c7eda16 Tools: added name to GIT_Success.txt 2020-09-17 07:34:29 -07:00
bugobliterator 460293d6a8 Tools: update CubeOrange_bl 2020-09-16 18:08:08 +10:00
Peter Barker 1075e13352 autotest: stop set_parameter from using get_parameter 
Setting a parameter on ArduPilot causes the autopilot to emit the new
value in a PARAM_VALUE message, so we do not need to fetch it ourselves.

Fetching it ourselves causes subtle problems for the autotest suite
where a PARAM_VALUE is currently in the uart buffer - so the autotest
set_parameter has consumed one PARAM_VALUE message (the auto-emitted
one).  If it immediately does a set_parameter then the next
PARAM_VALUE it sees will be the OLD value as the value comes out of the
uart.
 2020-09-15 19:27:36 +10:00
Peter Barker 3e708b9b29 Tools: build_parameters.sh: compress parameter xml files 2020-09-15 11:19:23 +10:00
Peter Barker 9e148f245b autotest: param_parse.py: correct parsing of Values fields 
the regex used to parse the values field later is rather strict - no
spaces allowed around the : for example.

Canonicalise the string before trying to do anything more with it
(including validation)
 2020-09-15 11:09:52 +10:00
Peter Barker 1cefd2943b Replay: correct various atrophications in Replay tool 
Replay: tear down threads before exitting

NKQ is a generated name - don't copy it across to output

Stop whinging about presence of NKF6 and friends; we know these generated names are not going to be present in modern logs

memcpy rather than strncpy within log_FMT

Correct strings vs optionally-terminated structure entries in sanity checks

Call AP_Param::load_all() to start the parameter saving thread.  AP_Compass' init() method now saves parameters (compass reordering), and because we're disarmed we will block until the parameter is pushed onto the to-save queue; if there's no thread popping off that list we block indefinitely.

Remove duplicate definitions of various singleton objects.

Replay: write out GPS message to output log

Useful for diagnosis, but also because we struggle to find a time base
without this and the pymavlink tools take forever to work

Replay: set COMPASS_DEV_ID and COMPASS_PRIO1_ID so EKF gets mag data

Replay: avoid use of system clock; use stopped-clock only

Replay: constraint to emitting output for single core only
 2020-09-15 10:02:36 +10:00
Andrew Tridgell 3da00b482e waf: enable -Werror for whitelisted compilers on ChibiOS builds 2020-09-15 09:40:03 +10:00
Andrew Tridgell ae2e84b3df AP_Periph: fixed mavlink build warnings 2020-09-15 09:40:03 +10:00
Andrew Tridgell 8b95fac214 Tools: added --Werror option to autotest.py 2020-09-15 09:40:03 +10:00
Peter Barker 3f2c06f8c0 build_ci.sh: correct cron job check against 'linux' 
We don't actually run this cronjob.
 2020-09-15 09:18:04 +10:00
Peter Barker 0bb44ba933 waf: print compiler version as part of configure 2020-09-14 18:11:31 +10:00
Peter Barker 466d61a881 Tools: build_log_message_documentation.sh: compress log message documentation files 2020-09-14 13:29:05 +10:00
Peter Barker 5c22e9e105 Revert "Tools: make non DEBUG SITL use -march=native" 
This reverts commit 85b599b2d7.

This breaks the cygwin binaries that MissionPlanner uses for simulation
 2020-09-14 11:19:11 +10:00
Peter Barker 3e882fcad8 autotest: loosen mag-percent-complete threshold to 95% 
So 98% wasn't loose enough...
 2020-09-11 15:31:45 +10:00
Harshit Kumar Sankhla f0c237d88e autotest: bug fixes for ekf lane switch test 2020-09-11 10:16:20 +10:00
Peter Barker 796cc72344 autotest: remove parameters with default values from copter.parm 
Setting these just takes time we don't need to spend
 2020-09-11 08:02:38 +10:00
Samuel Tabor 6de4967a3d autotest: Fix typos and unclear comments in soaring test. 2020-09-10 22:21:41 +10:00
Samuel Tabor f6017d60bf autotest: Update for new soaring behaviour. 2020-09-10 22:21:41 +10:00
Pierre Kancir 85b599b2d7 Tools: make non DEBUG SITL use -march=native 2020-09-10 15:16:18 +10:00
Peter Barker 995cda6363 autotest: stop taking off when we're already in the air 
Depending on timing we can miss the fact we're already at altitude as we
take off in stabilize and manipulate the throttle before checking
altitude
 2020-09-10 10:39:30 +10:00
Andrew Tridgell 6b242bf1db waf: add flash_total to apj file 2020-09-10 07:41:25 +10:00
Peter Barker 0f5f040380 autotest: send all progress messages to autopilot 
These will be logged into dataflash and into the telemetry log
 2020-09-09 23:47:28 +10:00
bugobliterator d997ca8779 autotest: pass calibration test even if 98% complete before success 2020-09-09 23:46:23 +10:00
Peter Barker 51b54d3740 autotest: avoid leaving message hooks around 
Can lead to some very weird and confusing output
 2020-09-09 17:59:17 +10:00
Andrew Tridgell 0f7f9a22fd Tools: added Matek GPS and airspeed builds 2020-09-09 06:38:05 +10:00
Andrew Tridgell a9ca78532e Tools: added MSP bus type to decode 2020-09-09 06:35:50 +10:00
Andrew Tridgell 9c24415f86 AP_Periph: support output of MSP sensor data 2020-09-09 06:35:50 +10:00
Peter Barker 9228f47dc9 autotest: create collections-on-context to record selected messages 2020-09-08 14:19:08 +10:00
Peter Barker f3866e5f39 autotest: disable button test 2020-09-08 12:31:15 +10:00
Andrew Tridgell 7c5a0a6a43 Tools: disable LOG_REPLAY by default in autotest 
LOG_REPLAY prevents us logging when we have sensor failures, which
makes many tests hard to debug
 2020-09-08 11:01:14 +10:00
Andrew Tridgell 80ef6fa7f2 Tools: added a MagFail test 
ensures that both EK2 and EK3 will failover to a new compass on
compass failure
 2020-09-08 11:01:14 +10:00
Peter Barker d508ba97c5 autotest: add test for SmartRTL getting another GCS failsafe 
Test for specific bug where we would land instead of continue in
SmartRTL
 2020-09-08 09:05:03 +09:00
Samuel Tabor 3c0d4b6d5a autotest: Add start time argument and parsing. 2020-09-07 21:20:25 +10:00
Andrew Tridgell a9ecac4fff Tools: added --osdmsp option to sim_vehicle.py 2020-09-07 11:59:20 +10:00
Pierre Kancir 2e60f361fa Tools: ardupilotwaf: remove '-Werror=suggest-override' from benchmark to prevent failure 
this is due to the fact that gbenchmark header should be compatible with C++03 and then don't accept C++11 feature like override ...
 2020-09-06 19:13:04 +10:00
Pierre Kancir 9d9cf2501a Tools: disable Gtest and testing on Gbenchmark build 2020-09-06 19:13:04 +10:00
Peter Barker 65268ee3d4 autotest: more button-test fixes 2020-09-06 16:49:16 +10:00
bugobliterator 6203e0685e autotest: disable MAG orientation test 2020-09-06 11:21:28 +10:00
Andy Piper 0b9d9fc284 autotest: use StringIO correctly 2020-09-06 09:12:59 +10:00
Pierre Kancir 31338f955b Tools: allow to skip completion installation 2020-09-05 13:31:03 +10:00
Andy Piper 6ebc7622fe autotest: comprehensive dataflash test 2020-09-05 10:20:39 +10:00
Pierre Kancir 11417ac3a7 Tools: build-ci: use python -m pip for easier pip version management 2020-09-04 09:31:23 +10:00
Pierre Kancir 7648413f8c Tools: configure-ci: use python -m pip for easier pip version management 2020-09-04 09:31:23 +10:00
Patrick José Pereira 050334273e Tools: Remove trailing spaces of build_ci 
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
 2020-09-03 18:14:34 +10:00
Patrick José Pereira 30e2aad6b9 Tools: Add arm-linux-musleabihf toolchain 
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
 2020-09-03 18:14:34 +10:00
Patrick José Pereira ee4f267743 Tools: Add navigator test in build_ci 
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
 2020-09-03 18:14:34 +10:00
Peter Barker 2ea41b7997 autotest: spit out actual simulated mag orientations as part of debug 2020-09-03 13:08:07 +10:00
Andrew Tridgell 689902cb69 waf: moved include of ap_config.h into configure step 2020-09-03 09:56:29 +10:00
Andrew Tridgell 24425b4155 waf: allow setup of double precision for some cpp files 2020-09-03 09:56:29 +10:00
Peter Barker 5a8b1639d0 autotest: fix nmea output test 2020-09-02 10:05:26 +10:00
Andrew Tridgell 844d2bf7ff waf: enable MSP when we enable OSD 2020-09-02 05:56:46 +10:00
Andrew Tridgell 6f04b4a5ec waf: added --osd-fonts configure option 
allows for --osd without fonts
 2020-09-02 05:56:46 +10:00
Andrew Tridgell 7c579c4814 waf: added --osd configure option 
to allow boards with no builtin OSD to use MSP OSD
 2020-09-02 05:56:46 +10:00
yaapu b658edfa20 Tools: added MSP 2020-09-02 05:56:46 +10:00
Peter Barker 522c3e6281 autotest: make LogUpload the last test again 
ATM any logs produced by EKFLaneswitch won't get uploaded in case of
failure
 2020-09-01 18:15:37 +10:00
Peter Barker 23ba2002e8 autotest: dump final mag cal report verbosely 2020-09-01 14:11:57 +10:00
Peter Barker 74c47827d9 autotest: drain stdout of SITL binary 
The new rate messages were filling up the stdout buffer, causing the
process to block....
 2020-08-30 08:38:35 +10:00
Peter Barker e8fa4e1351 autotest: disable autotest for altitude prearm check 2020-08-30 08:38:35 +10:00
Peter Barker 397e134106 autotest: quieten RTL 2020-08-30 08:38:35 +10:00
Peter Barker 065d03dd30 autotest: add a timeout in the button test 2020-08-30 08:38:35 +10:00
Peter Barker c01b26ca62 autotest: fix race condition in EKF type 10 
EKF type 10 is always able to give you a position - but the arming
checks require you to have a good GPS position, and that's something
else again.
 2020-08-30 08:38:35 +10:00
Peter Barker cafc5b01f4 autotest: fix race condition in Rover RTL test 2020-08-30 08:38:35 +10:00
Peter Barker 43cdceba8f autotest: tweak wait_ready_to_arm 2020-08-30 08:38:35 +10:00
Peter Barker b7641345e1 autotest: set and get parameters directly using mavlink message 2020-08-30 08:38:35 +10:00
Peter Barker ba91cbb270 autotest: correct sub parameter name PSC_VELZ_P, fix test to match 2020-08-30 08:38:35 +10:00
Pierre Kancir 084ec2bb5a Autotest: copter: fix wait_for_alt for descending wait 2020-08-29 14:53:30 +10:00
Pierre Kancir ebd13ac84e Tools: copter: wait_landed_and_disarmed: use wait_for_alt 2020-08-29 14:53:30 +10:00
Pierre Kancir 7fbf11061f Tools: copter: add wait_rtl_complete function 2020-08-29 14:53:30 +10:00
Pierre Kancir 3080899b43 Tools: copter: add wait land and disarm functions 2020-08-29 14:53:30 +10:00
Pierre Kancir 936511a720 Autotest: common: correct some text format 2020-08-29 10:44:19 +10:00
Pierre Kancir 5b72de25e0 Autotest: update wait_distance_to_home 
Autotest: copter: allow to pass min_distance for RTL

Autotest: rover: allow to pass min distance for RTL
 2020-08-29 10:44:19 +10:00
Peter Barker 119462aeb1 build_binaries.py: Python3 fix 
Something in the program output is not ascii
 2020-08-28 08:31:46 +10:00
Harshit Kumar Sankhla 464c90a03c Tools: add an EKF3 lane switching test to plane 2020-08-27 20:20:51 +10:00
Pierre Kancir 16b499d0f6 Autotest: allow to select which GPS flags we want to wait for 2020-08-27 09:11:13 +10:00
Peter Barker 80bee19bc9 autotest: correct race condition in button test 
A BUTTON_CHANGE may have been emitted after we send the parameter but before it is processed by the autopilot
 2020-08-26 13:22:14 +10:00
Peter Barker 3ae83d70b1 autotest: ensure df log is present for rangefinder tests 
there may not be a current onboard log present if we've just rebooted
 2020-08-26 11:59:11 +10:00