Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
62,866 Commits 70 Branches 507 Tags 659 MiB
Commit Graph

607 Commits

Author SHA1 Message Date
Kevin Lopez Alvarez 18dab4829a AP_Baro: initial FMUv4pro support 2017-07-24 13:45:37 +10:00
Michael du Breuil 6b60c110a5 AP_Baro: Improve GND_TEMP parameter docs 2017-07-16 20:22:00 +01:00
Michael du Breuil f14667225d AP_Baro: Avoid a FPE when ground pressure is negative 2017-07-15 10:49:16 +09:00
Peter Barker 1748e7cb0c AP_Baro: make backends responsible for setting their health 
This resolves a problem in SITL where the barometer would
not change value for prolonged period of time, making it
go unhealthy
 2017-07-14 07:28:48 +09:00
Randy Mackay 6982e58cf2 Baro: health check that values are changing 2017-07-08 08:40:19 +09:00
Eugene Shamaev 6e6efa7e1b AP_Baro: enumeration and multiple interfaces support 2017-07-03 11:44:32 +01:00
Miguel Arroyo 6cf9b870b5 AP_Baro: AP_Baro_SITL more accurately simulates real sensor backend. 2017-06-23 09:36:28 +10:00
Dr.-Ing. Amilcar Do Carmo Lucas ed916327fc AP_Baro: Use SI units conventions in parameter units 
Follow the rules from:
http://physics.nist.gov/cuu/Units/units.html
http://physics.nist.gov/cuu/Units/outside.html
and
http://physics.nist.gov/cuu/Units/checklist.html
one further constrain is that only printable (7bit) ASCII characters are allowed
 2017-05-17 18:07:25 +10:00
Peter Barker ccc495e4c1 AP_Baro: use HAL_SEMAPHORE_BLOCK_FOREVER macro 2017-05-08 10:23:03 +09:00
Andrew Tridgell 375c7b0f5f AP_Baro: rename macros to avoid conflicts 
these macros were also defined in NuttX in clock.h
 2017-05-06 15:21:14 +10:00
Andrew Tridgell 9bdf971336 AP_Baro: added set_pressure_correction() 
for use by AP_TempCalibration
 2017-05-03 20:12:04 +10:00
Andrew Tridgell 99883ffc49 AP_Baro: added temperature sensitivity modelling in SITL 2017-05-03 20:12:04 +10:00
Andrew Tridgell ee4161fa62 AP_Baro: moved SITL baro to standard sensor backend model 2017-05-03 20:12:04 +10:00
Andrew Tridgell cbea29ad71 AP_Baro: use sensor_config_error() 2017-05-03 11:37:01 +10:00
Jacob Walser 96f503d9d1 AP_Baro: Fix GND_EXT_BUS @Values formatting 2017-04-21 21:11:40 +01:00
Eugene Shamaev fd866d3e20 AP_Baro: removal of legacy UAVCAN support 2017-04-17 17:27:18 +10:00
Eugene Shamaev 331419a51e AP_Baro: support for UAVCAN connected barometers 2017-04-10 22:38:12 +01:00
Michael du Breuil c37209a8d5 AP_Baro: Limit ground temperature used for the altitude 
Fix an incorrect EAS2TAS that was double counting altitude
 2017-03-28 11:25:46 +11:00
Tom Pittenger fb24a03faf AP_Baro: don't compile drivers for devices that don't use them 2017-03-24 12:06:19 +11:00
Lucas De Marchi 00c2949dfb Add support for baro on aerofc 2017-03-24 12:06:19 +11:00
Francisco Ferreira f6687a2d6c AP_Baro: fix example output 
PX4 boards can only start console after USB is connected so we need to
check it is available
 2017-03-07 09:37:14 +11:00
Andrew Tridgell d5cad2ae44 AP_Baro: support AUAV21 board 2017-03-01 17:24:10 +11:00
Tom Pittenger fb214ef95f AP_Baro: fixed spelling in comment 2017-02-21 02:23:23 -08:00
Jacob Walser 613bc46592 AP_Baro: Add support for water pressure and Sub 2017-02-21 11:26:14 +11:00
murata f5c3de2a61 AP_Baro: Change from magic number 0 to definition name. 2017-02-18 14:12:36 +00:00
Lucas De Marchi 9814dc81e2 AP_Baro: examples: better output formatting 2017-02-12 01:22:35 +00:00
Lucas De Marchi 402f0cce85 AP_Baro: examples: fix coding style 2017-02-12 01:22:35 +00:00
murata 32b60432b4 AP_Baro: Add format specification. 
AP_Baro: Add format specification.
 2017-01-27 18:20:22 +11:00
murata 78a4cab06b AP_Baro: Unify from print or println to printf. 2017-01-27 18:20:22 +11:00
Andrew Tridgell 8aa100d164 AP_Baro: fix for change to timer API 2017-01-14 12:54:37 +11:00
mirkix 1ce5e5360a AP_Baro: Add Bosch BMP280 driver 2017-01-14 12:52:07 +11:00
Lucas De Marchi 5472bc4de1 Global: change Device::PeriodicCb signature 
Remove bool return as it's never being used and not supported on PX4.
 2017-01-14 10:03:54 +11:00
murata 87c2dfd921 AP_Baro: Change to secure code, from magic number to sizeof value. 2017-01-12 13:56:18 -08:00
Victor Lambret a4108251e3 AP_Baro: fix get_last_update(instance) 
The method was not using the instance parameter. Instead it always use
primary barometer. Bug was not detected because method
get_last_update() is used where instance is _primary.

Detected with warnings, warnings are useful :-)
 2017-01-04 17:32:24 +00:00
murata 753638851e AP_Baro: Changed if statements to switch statement. 2016-12-20 14:13:47 +00:00
Andrew Tridgell 8a1275356d AP_Baro: moved MS5611 reset before prom read 
thanks to Jacob and Lucas for pointing this out
 2016-12-13 11:10:35 +11:00
Andrew Tridgell eea7758a63 AP_Baro: added GND_EXT_BUS option 
this is needed to enable probing for a MS5611 on external I2C bus. The
MS5611 looks the same as a MS5525 airspeed sensor, so we can't just
auto-probe. Users will need to enable external barometers
 2016-12-05 16:51:49 -08:00
Andrew Tridgell cd57422eed AP_Baro: set retries high during init of MS5611 on I2C 2016-12-02 09:47:51 +11:00
Andrew Tridgell f2246326bb AP_Baro: added MS5611 probing, and support 3 baros on Pixhawk2 
this adds sensor probing for barometers, simplifies the MS5611 driver,
and adds support for the I2C external barometers on Pixhawk2
 2016-11-25 21:40:11 +11:00
Andrew Tridgell c2125a0078 AP_Baro: wait forever for semaphore on startup 2016-11-21 18:04:10 -02:00
Andrew Tridgell b16226dddf AP_Baro: fixed a bug with corrupted conversions in MS5611 driver 
the datasheet says that if you get back zero in an ADC read that the
next value can be corrupt. I have seen this happen on the FMUv1,
leading to bad altitude readings
 2016-11-13 17:08:06 +11:00
Andrew Tridgell 41b132e576 AP_Baro: setup for new board PX4 IDs 2016-11-11 08:08:55 +11:00
Andrew Tridgell d716bbedee AP_Baro: use in-tree drivers for PH2SLIM 2016-11-10 11:44:52 +11:00
Andrew Tridgell fea7040aff AP_Baro: don't panic when we can't find MS5611 
this makes booting a PH2 without its sensor hat on much easier
 2016-11-10 11:44:51 +11:00
Andrew Tridgell b8c789cf35 AP_Baro: switch pixracer to always use in-tree drivers 2016-11-09 17:08:14 +11:00
Andrew Tridgell 565f1986e0 AP_Baro: fixed FMUv1 baro and enable in-tree driver for PHMINI 2016-11-09 17:08:13 +11:00
Andrew Tridgell 66026100c3 AP_Baro: enable dual baro on PH2 2016-11-09 17:08:03 +11:00
Andrew Tridgell 4df9b093c3 AP_Baro: fixed missed samples in ms5611 driver 2016-11-09 17:08:03 +11:00
Andrew Tridgell bedee31f61 AP_Baro: fixed semaphore and thread usage in baro drivers 2016-11-09 17:08:02 +11:00
Andrew Tridgell 72c2e3a4d5 AP_Baro: select in-tree vs PX4 drivers at runtime 2016-11-09 17:07:58 +11:00
murata c808ee2f49 Global: To nullptr from NULL. 
RC_Channel: To nullptr from NULL.

AC_Fence: To nullptr from NULL.

AC_Avoidance: To nullptr from NULL.

AC_PrecLand: To nullptr from NULL.

DataFlash: To nullptr from NULL.

SITL: To nullptr from NULL.

GCS_MAVLink: To nullptr from NULL.

DataFlash: To nullptr from NULL.

AP_Compass: To nullptr from NULL.

Global: To nullptr from NULL.

Global: To nullptr from NULL.
 2016-11-02 16:04:47 -02:00
Peter Barker dbecb1bc25 AP_Baro: add missing parameter metadata 2016-10-27 09:15:03 -07:00
Mathieu OTHACEHE 152edf7189 Global: remove mode line from headers 
Using a global .dir-locals.el file is a better alternative than
reincluding the same emacs header in every file of the project.
 2016-10-24 09:42:01 -02:00
Lucas De Marchi ae53920e5b build: don't build examples with old build system 
We currently check examples are buildable with waf which doesn't need
the libraries to be specified in a make.inc file.  Having the makefiles
there is misleading since people try to build and realize the build is
broken.
 2016-10-11 13:03:08 +11:00
Andy Little 0d113b265c Examples: fix examples for px4 
The change to use AP_BoardConfig messed up the examples. Here are some
updated but there are plenty more to do.
 2016-10-04 12:50:47 -03:00
Lucas De Marchi e217faacab AP_Baro: MS56XX: cosmetic changes to members 
- reorder and document members.
    - remove tentative of vertical alignement
    - like was done for accumulated values, move the calibration
      values to a struct
 2016-07-30 00:55:28 -03:00
Lucas De Marchi f7b453359d AP_Baro: MS56XX: convert to threaded bus 
This converts MS56XX to use the thread started by SPI/I2C instead of
using the timer thread. This also fixes a possible starvation of the
main thread:

    1) INS driver registers itself to be sampled on timer thread
    2) MS56XX registers itself to be sampled on timer thread
    3) Main thread waits for a sample from INS with
       ins.wait_for_sample()
    4) timer thread is waiting on update from MS56XX and consequently
       the main thread is waiting on an I2C/SPI transfer

Besides this starvation there's another one due to reuse of the timer
lock in order to pump values from the timer thread to the main thread. A
call to the update() method when we have a sample available would need
to wait on any other driver holding the timer lock.

Now there's a lock just to pass the new values from the bus thread to
the main thread with a very tiny critical region, not waiting on any
bus transfers and/or syscalls.
 2016-07-30 00:55:28 -03:00
Lucas De Marchi 929348ff75 AP_Baro: MS5611: always use timer thread 
Remove support to run MS5611 on main thread since we shouldn't be doing
I2C transactions there and we are moving to "thread per bus"
nonetheless.
 2016-07-30 00:55:28 -03:00
Tom Pittenger 84ce499a0d AP_Baro: remove zero-init in constructor 2016-07-11 22:11:34 -07:00
Tom Pittenger 1d81df8144 Revert "AP_Baro: coverity scan - variables not initialized in constructor" 
This reverts commit 8d2872d3ab.
 2016-07-11 22:02:41 -07:00
Tom Pittenger 8d2872d3ab AP_Baro: coverity scan - variables not initialized in constructor 2016-07-05 13:32:06 -07:00
Tom Pittenger f1f58e2026 AP_Baro: created baro drift offset accessor 2016-05-13 17:22:11 -07:00
Tom Pittenger d55050e5e3 AP_Baro: slow down the LPF for slewing to a new GND_ALT_OFFSET 
Instead of a couple seconds, make it about 15sec. This makes TECS happy by not glitching the height demand as much. When applied too fast the TECS height demand causes a large single oscillation as it chases the filter lag.
 2016-05-13 17:15:53 -07:00
Tom Pittenger 37ee3b44d2 AP_Baro: add accessor for baro drift 2016-05-13 17:15:41 -07:00
Lucas De Marchi 3c7d80a270 AP_Baro: BMP085: use a moving average of 10 samples in BMP085 
Instead of depending on the frequency accumulate() is called, use
AverageIntegralFilter with 10 samples. The data obtained by BMP085 is
too noisy with any value of OVERSAMPLING so use twice the number of
samples as currently used. Besides that now we are sure there's always
10 samples used in the average.
 2016-05-10 14:24:59 -03:00
Lucas De Marchi 8da5275b03 AP_Baro: BMP085: don't average temperature in BMP085 
The temperature readings is not subject to white noise so there's no
point in averaging its reading. Moreover since for a normal 50Hz
accumulate() / 10Hz update() it would read temperature only once per
update(), it's pointless to keep averaging and introducing rounding
error.

The temperature doesn't need to be checked as frequent as pressure, too.
The datasheet even suggests on section 3.3, page 10 to enable standard
mode and read the temperature at 1Hz. Here we reduce it to 2Hz
(considering the accumulate() function being called at 50Hz).
 2016-05-10 14:24:59 -03:00
Lucas De Marchi c5c52076ca AP_Baro: BMP085: rename private member 2016-05-10 14:24:58 -03:00
Lucas De Marchi e40b88aa70 AP_Baro: BMP085: use DigitalSource interface in BMP085 
Use the DigitalSource interface rather than going through the "static"
interface hal.gpio provides
 2016-05-10 14:24:58 -03:00
Lucas De Marchi 56fa1b6214 AP_Baro: BMP085: change oversampling in BMP085 without EOC 
If we don't have EOC pin and assuming the accumulate() function is
called at 50Hz (or higher) we would take very few samples to accumulate
before the update is called. That's because since we have to wait 26ms
to get a sample and we calling accumulate() every 20ms, half of the
times it will return without getting anything.  So we will
be using 2 or 3 samples only to average.

If we don't have EOC, use OVERSAMPLING=2 which gives us more noise, but
that we can filter out by using measurements to average. When we have
EOC we don't need it because most of the time the conversion will take
less than 20ms: I'm getting 16ms on most of them while bench-testing.
 2016-05-10 14:24:58 -03:00
Lucas De Marchi 37e2f6c52e AP_Baro: BMP085: allow to easily change oversampling in BMP085 
This way it's possible to easily change it if a board requires.
 2016-05-10 14:24:58 -03:00
Andrew Tridgell 8b7bf5cf7a AP_Baro: allow setHIL to set last update time 2016-05-07 18:27:21 +10:00
Andrew Tridgell 0b71652afc AP_Baro; allow for exact replay of baro data 2016-05-07 18:27:20 +10:00
Andrew Tridgell 8a987bf67d AP_Baro: removed filtering of baro data in HIL/SITL 
this was just causing lag in replay and doesn't actually help in SITL
 2016-05-07 18:27:18 +10:00
Don Gagne cae7ea0d13 Add @Volatile, @ReadOnly support 2016-03-17 10:58:05 +11:00
Andrew Tridgell 0a72c2bbd5 AP_Baro: prevent bad ground pressure from making a board unbootable 2016-02-23 16:34:06 +11:00
Lucas De Marchi f1ade970a3 AP_Baro: MS5611: Use AP_HAL::Device abstraction 
This allows to share almost all the I2C/SPI code and remove the
AP_Serial abstraction since that is now handled by AP_HAL itself.
 2016-02-16 19:49:09 -02:00
Lucas De Marchi b05954660a AP_Baro: BMP085: use I2CDevice interface 2016-02-16 19:49:09 -02:00
Tom Pittenger f435c5ee50 AP_Baro: tolerate GND_ALT_OFFSET step inputs 
large inputs make the EKF angry, this will allow the param update to slew over a few seconds
 2016-02-08 21:13:58 -08:00
Lucas De Marchi 56e4de0bdd AP_Baro: MS56XX: remove initialization to 0 from constructor 2016-02-01 14:18:50 -02:00
Lucas De Marchi 9d5fb97819 Global: rename enum SPIDevice to SPIDeviceType 
Free the SPIDevice name so to have a consistent name for I2C/SPI device
classes.
 2016-02-01 14:18:50 -02:00
Gustavo Jose de Sousa c2e3f05dbf waf: ardupilotwaf: prefix build context methods with ap_ 
It helps to distinguish between things from waf and things from ardupilotwaf.
 2016-01-22 20:10:29 -02:00
Gustavo Jose de Sousa 3d22490397 waf: examples: use methods from bld instead of ardupilotwaf 2016-01-22 20:10:29 -02:00
Julien BERAUD d15097f3fc AP_Baro_MS5611: Support for timesliced timers 
fallback if current scheduler doesn't support it
 2016-01-18 16:57:48 -02:00
Gustavo Jose de Sousa d281067bcc waf: make example binaries be placed in 'examples' dir 
This commit makes examples' wscripts use ardupilotwaf.example() instead of
ardupilot.program().
 2016-01-15 16:46:41 -02:00
Jonathan Challinger dcfc95fadf AP_Baro: fix example build 2015-12-29 10:46:35 -08:00
Lucas De Marchi a096703b06 Global: don't link with AP_Progmem 
AP_Progmem is not used anymore.
 2015-12-27 15:58:12 -02:00
Andrew Tridgell ff44a63007 AP_Baro: added QURT driver 2015-12-27 16:21:25 +11:00
Andrew Tridgell 1f4e503d91 AP_Baro: added qflight driver 2015-12-27 16:12:27 +11:00
Andrew Tridgell ef83f39029 AP_Baro: renamed _C* vars to avoid conflict with qurt 2015-12-20 17:55:39 +11:00
Lucas De Marchi 5b1769cd2b AP_Baro: remove unused AP_ADC_AnalogSource 2015-12-03 13:32:42 +11:00
Caio Marcelo de Oliveira Filho 6e7b73610d waf: add waf support 2015-12-03 07:54:30 +11:00
Lucas De Marchi 8eee888b3e AP_Baro: BMP085: move data-ready macro to a method 2015-12-02 10:40:50 +11:00
Lucas De Marchi c5e97129c1 AP_Baro: BMP085: follow coding style 
- Spacing changes and variable renames to follow coding style
 - No need to initialize variables to 0, it's already done by our
   global new operator.
 2015-12-02 10:40:50 +11:00
Lucas De Marchi 81a298c9c8 AP_Baro: reduce header scope 
We don't need to expose to other libraries how each backend is
implemented. AP_Baro.h is the main header, included by other libraries.

Instead of including each backend in the main header, move them to where
they are needed. Additionally standardize the order and how we include
the headers.

The advantages are:
	- Internals of each backend is not exposed outside of the
	  library
	- Faster incremental builds since we don't need to recompile
	  whoever includes AP_Baro.h because a backend changed
 2015-12-02 10:40:50 +11:00
Lucas De Marchi 30f631de8f AP_Baro: MS5637: fix CRC check 
The configuration of MS5637 is different from MS5611 in 2 ways:

    - The PROM is of 112 bytes rather than 128
    - The CRC is located in the first MSB of the first word, not the
      last one

For CRC calculation we also need to zero out the last (missing) word.

This renames _check_crc() to _read_prom(), which returns false when the
PROM doesn't contain valid data. It also makes it virtual so MS5637 can
override it. This also moves the PROM read to be all in the same place
rather than split between the CRC field and coefficient fields. Finally
calculate_crc() is renamed to crc4() to be shorter and add info on what
it does.
 2015-12-02 10:38:09 +11:00
José Roberto de Souza 7457588d7c AP_Baro: Move initialisation code from MS56XX constructor to init() 
On MS5637 we will need to override the method to read and calculate the
PROM's crc. Thus we need a 2-phase init.

It also makes the constructor of AP_Baro_MS56XX protected since only the
derived classes should instantiate the base one.
 2015-12-02 10:38:09 +11:00
José Roberto de Souza 29791c9cec AP_Baro: Make _check_crc more readable 2015-12-02 10:38:09 +11:00
Caio Marcelo de Oliveira Filho 8cce3067f4 AP_Baro: examples use millis/micros/panic functions 2015-11-20 12:29:38 +09:00
Caio Marcelo de Oliveira Filho 5a280838f8 AP_Baro: use millis/micros/panic functions 2015-11-20 12:29:31 +09:00
Lucas De Marchi 977f6aaf15 AP_Baro: MS5611: remove empty statement 2015-11-11 13:48:48 +11:00
Lucas De Marchi 94d01934f7 AP_Baro: MS5611: reduce OSR to 1024 
This is the same change as done in PX4:

	This reduces self-heating of the sensor which reduces the amount
	of altitude change when warming up. Apparently some individual
	sensors are severely affected by this.

	Unfortunately it raises the noise level, but Paul is confident
	it won't be a significant issue.
 2015-11-11 13:48:48 +11:00
Andrew Tridgell 840c9e65bb AP_Baro: don't notify the GCS of new pressure reference too often 2015-11-09 14:34:07 +11:00
Peter Barker 1b13315092 AP_Baro: notify GCS of calibration 2015-11-09 09:23:20 +11:00
Lucas De Marchi 8eef58a8c2 AP_Baro: remove check for AVR CPUs 
Remove the checks for HAL_CPU_CLASS > HAL_CPU_CLASS_16 and
HAL_CPU_CLASS >= HAL_CPU_CLASS_75. Corresponding dead code will be
removed on separate commits.
 2015-11-04 12:14:14 +11:00
Lucas De Marchi 4bd8b2ae35 AP_Baro: remove checks for HAL_BOARD_APM2 and HAL_BOARD_APM1 2015-11-04 12:14:11 +11:00
Lucas De Marchi 831d8acca5 Remove use of PROGMEM 
Now variables don't have to be declared with PROGMEM anymore, so remove
them. This was automated with:

    git grep -l -z PROGMEM | xargs -0 sed -i 's/ PROGMEM / /g'
    git grep -l -z PROGMEM | xargs -0 sed -i 's/PROGMEM//g'

The 2 commands were done so we don't leave behind spurious spaces.

AVR-specific places were not changed.
 2015-10-30 14:35:16 +09:00
Lucas De Marchi 2c38e31c93 Remove use of PSTR 
The PSTR is already define as a NOP for all supported platforms. It's
only needed for AVR so here we remove all the uses throughout the
codebase.

This was automated with a simple python script so it also converts
places which spans to multiple lines, removing the matching parentheses.

AVR-specific places were not changed.
 2015-10-30 14:35:04 +09:00
Lucas De Marchi 386547427d AP_Baro: support MS5611 on second i2c bus 2015-10-22 12:04:52 +11:00
wsilva32 da9118fbd0 AP_Baro: average SITL baro measurements using update() 2015-10-21 10:25:08 +11:00
Lucas De Marchi 4d3229daa2 AP_Baro: remove check for HAL_CPU_CLASS 
We don't support HAL_CPU_CLASS <= HAL_CPU_CLASS_16 anymore. This makes
BARO_MAX_INSTANCES and BARO_MAX_DRIVERS constant for all supported
boards.
 2015-10-21 10:05:18 +11:00
Caio Marcelo de Oliveira Filho 24178c3e10 AP_Baro: remove unnecessary includes in example 2015-10-21 09:16:10 +11:00
Caio Marcelo de Oliveira Filho ec52df991c build: compile only the HAL files needed by the board 
Instead of requiring every program to specify the HAL related modules,
let the build system do it (in practice everything we compiled depended
on HAL anyway). This allow including only the necessary files in the
compilation.
 2015-10-21 09:16:07 +11:00
Caio Marcelo de Oliveira Filho 2e464a53c2 AP_HAL: make code not depend on concrete HAL implementations 
The switching between different AP_HAL was happening by giving different
definitions of AP_HAL_BOARD_DRIVER, and the programs would use it to
instantiate.

A program or library code would have to explicitly include (and depend)
on the concrete implementation of the HAL, even when using it only via
interface.

The proposed change move this dependency to be link time. There is a
AP_HAL::get_HAL() function that is used by the client code. Each
implementation of HAL provides its own definition of this function,
returning the appropriate concrete instance.

Since this replaces the job of AP_HAL_BOARD_DRIVER, the definition was
removed.

The static variables for PX4 and VRBRAIN were named differently to avoid
shadowing the extern symbol 'hal'.
 2015-10-21 09:16:07 +11:00
José Roberto de Souza c53e9d1ff0 AP_Baro: Fix typo 2015-10-16 10:05:03 +11:00
José Roberto de Souza 9a98eb35fc AP_Baro: Add MS5637 over I2C to init() 2015-10-16 10:05:03 +11:00
José Roberto de Souza c373ce34d1 AP_Baro: MS56XX: Some minor fixes 2015-10-16 10:05:03 +11:00
José Roberto de Souza d9931b5f34 AP_Baro: Add support to MS5637 
As AVR2560 is not supported anymore and do integer operations is
usually faster than float-point the _calculate() implementation was
done using only integer operations and as more close to what
datasheet says.
 2015-10-16 10:05:03 +11:00
raspilot 831bb554e7 AP_Baro_MS5611: suspend timer when init to prevent other SPI drivers grabbing the bus. 2015-10-02 09:54:55 +10:00
mirkix ba4db34c83 AP_Baro: Prevent busy waiting 2015-10-02 09:49:12 +10:00
Julien BERAUD 3b5d73b1fe AP_Baro_MS5611: Fix state machine in case of error 
If there is a read error, reading from the adc will return 0 but moreover,
we need to re-initiate a read or else we are stuck forever.

From MS5611-01BA03 datasheet, p. 10, CONVERSION SEQUENCE:
"After the conversion, using ADC read command the result is clocked out with the MSB first.
If the conversion is not executed before the ADC read command, or the ADC read command is
repeated, it will give 0 as the output result."
 2015-09-23 09:19:22 +10:00
Andrew Tridgell a5462fec0b AP_Baro: allow selection of primary barometer and add 3rd baro 
this is useful for external I2C barometers on a PH2
 2015-09-14 14:27:41 +10:00
Gustavo Jose de Sousa bcd5dff774 AP_Baro: MS56XX: do not change change state on error 
If we have an error in the SPI or I2C transaction we should not change
the state. Otherwise we might read a temperature when the sensor is
reporting pressure and vice-versa.
 2015-09-01 20:26:06 +10:00
Gustavo Jose de Sousa 1f29e18375 AP_Baro: make AP_SerialBus::write() return success or failure for MS56XX 2015-09-01 20:26:05 +10:00
Tom Pittenger 749c0c190f AP_Baro - fix BARO_ALT_OFFSET param 
This param seems to have been un-implemented. This is putting it back in. Adds a meter offset to the calculated altitude form the baro sensors.
Also changes it from int8 to float
 2015-08-26 13:16:05 +10:00
Gustavo Jose de Sousa f18802bc46 AP_Baro: standardize inclusion of libaries headers 
This commit changes the way libraries headers are included in source files:

 - If the header is in the same directory the source belongs to, so the
 notation '#include ""' is used with the path relative to the directory
 containing the source.

 - If the header is outside the directory containing the source, then we use
 the notation '#include <>' with the path relative to libraries folder.

Some of the advantages of such approach:

 - Only one search path for libraries headers.

 - OSs like Windows may have a better lookup time.
 2015-08-11 16:28:42 +10:00
Grant Morphett 312184dd13 AP_Baro: coverity fixes - add param init in constructor 2015-07-30 12:37:08 +10:00
Randy Mackay 5732a6a144 Baro: update climb rate only if healthy 2015-07-29 16:32:49 +09:00
Julien BERAUD d407737434 AP_Baro: added MS5607 support 2015-07-10 16:46:29 +10:00
Andrew Tridgell 282efe2d57 AP_Baro: fixed example to run accumulate at 50Hz 2015-07-10 09:59:35 +10:00
Andrew Tridgell 4368f922a3 AP_Baro: convert example from .pde to .cpp 2015-06-01 16:58:10 +10:00
Lucas De Marchi df5652fa87 AP_Baro: use functor macros 
Functor is not yet being used but let's make is macro fallback to the
previous Delegate implementation for easy of transition between the two.
 2015-05-26 13:46:52 +10:00
ziltoid2 23787cf695 AP_Baro: use ground_temperature instead of calibration_temperature for alt calculation 2015-05-20 11:42:21 +10:00
Andrew Tridgell 48fb7f8159 AP_BARO: revert AP_Math class change 2015-05-05 13:27:05 +10:00
Tom Pittenger 0b29848277 AP_Baro: compiler warnings: apply is_zero(float) or is_equal(float) 2015-05-05 13:26:56 +10:00
Andrew Tridgell 7d9d594283 AP_Baro: fix for HAL_SITL rename 2015-05-05 09:45:55 +10:00
Randy Mackay 55298a4c73 Baro: fix example sketch 2015-05-02 17:25:44 +09:00
Randy Mackay 1b381b5675 Baro: get_air_density_ratio gets div-by-zero check 2015-04-29 14:36:20 +09:00
Jonathan Challinger f381ef93e8 AP_Baro: add get_air_density_ratio 2015-04-29 14:36:10 +09:00
Tom Pittenger 4191c44bbd Baro: fix compile warning re member init order 2015-04-24 14:15:11 +09:00
Andrew Tridgell 2e9d2e6449 AP_Baro: load only HIL backend for hil_mode 2015-03-13 22:52:55 +11:00
Andrew Tridgell d040318014 AP_Baro: removed unused define 2015-03-13 18:46:17 +11:00
Randy Mackay 4e7d92094c Baro: remove glitch detection 2015-03-13 16:40:29 +09:00
Andrew Tridgell 1f70b34cbc AP_Baro: fixed baro startup on PXF cape 2015-03-13 13:48:41 +11:00
Andrew Tridgell beeb9173ea AP_Baro: change for new PX4 paths 2015-02-14 12:25:43 +11:00
Andrew Tridgell ac3dd87790 AP_Baro: added hil_mode support 2015-02-10 09:53:30 +11:00
Randy Mackay bb4204c045 Baro: fix example sketch 2015-01-28 17:15:37 +09:00
Randy Mackay c93e7a69a7 Baro: init external_temperature in constructor 2015-01-12 13:56:35 +09:00
Andrew Tridgell b1d8df3d54 AP_Baro: only allow calibrated sensors to be used 2015-01-09 12:59:01 +11:00
Andrew Tridgell 3320dfd7fa AP_Baro: fixed ms5611 spelling error 2015-01-09 11:59:49 +11:00
Andrew Tridgell 0a8677b3e2 AP_Baro: fixed build after rebase with all_healthy() 2015-01-09 11:51:52 +11:00
Andrew Tridgell 1c2a6deaaf AP_Baro: added all_healthy() method 2015-01-09 11:51:51 +11:00
Andrew Tridgell 8359c082ca AP_Baro: fixed baro on NavIO 
don't use the 1kHz timer as it conflicts with other I2C devices
 2015-01-09 11:51:51 +11:00
Andrew Tridgell 197c09fcd8 AP_Baro: added num_instances() API 2015-01-09 11:50:56 +11:00
Andrew Tridgell f1891cea1f AP_Baro: BMP085 driver done, but untested 2015-01-09 11:50:54 +11:00
Andrew Tridgell 5bb57a31f7 AP_Baro: split into frontend/backend 
this allows for support of multiple sensors on a board
 2015-01-09 11:50:54 +11:00
Staroselskii Georgii 43c88c37eb AP_Baro: fixed MS5611 initialisation in order to get rid off conflicts with other I2C devices 2015-01-07 08:41:13 +11:00
Randy Mackay ddda0d52ce Baro: reorder declaration to fix compiler warning 
No functional change
 2014-12-11 13:06:24 +09:00
Andrew Tridgell e45522f51d AP_Baro: fixed example build 2014-11-28 10:40:43 +11:00
Andrew Tridgell d404cc6542 AP_Baro: add set_external_temperature() 
this allows the use of an external temperature sensor for calibration
purposes, such as the sensor built in to the digital airspeed sensor.

The main affect this has is on the EAS2TAS calculation

The get_calibration_temperature() is used to choose either an external
temperature or an internal one. If an internal one is used then it is
clamped at no higher than 25 degrees C, to prevent hot electronics
on startup affecting altitude scaling and EAS2TAS
 2014-11-12 13:36:01 +11:00
Andrew Tridgell 8b794602d1 AP_Baro: make get_temperature() a const function 2014-11-12 13:36:01 +11:00
Randy Mackay 67690553c5 BaroGlitch: add reset method 2014-11-09 13:34:15 -08:00
Randy Mackay 3a81732721 Baro: minor param description updates 2014-10-14 12:42:27 +09:00
Andrew Tridgell 5280d8936d AP_Baro: remove usage of hrt_absolute_time() 
use a single time base in all code
 2014-08-20 08:41:15 +10:00
Andrew Tridgell d01fa3bfbd AP_Baro: prevent reading the MS5611 too fast 
setup the timer start after we've started the conversion to prevent
reading faster than the MS5611 is able to produce values
 2014-08-19 21:16:13 +10:00
Randy Mackay fd5dee96e4 BaroGlitch: check baro health after alt calculation 
Also correct type of distance_cm internal variable
 2014-08-14 16:03:33 +09:00
Randy Mackay 424a65663a Baro: init members to resolve compiler warning 2014-08-14 16:03:30 +09:00
Randy Mackay 53b073148b BaroGlitch: use baro healthy() 2014-08-14 16:03:21 +09:00
Randy Mackay 78b1bf8282 Baro: example sketch to use healthy() function 2014-08-14 16:03:15 +09:00
Randy Mackay 76634ee8c3 Baro_PX4: use healthy flag 2014-08-14 16:03:12 +09:00
Randy Mackay d29fe51cb3 Baro_VRBrain: use healthy flag 2014-08-14 16:03:09 +09:00
Randy Mackay 24db492131 Baro_MS5611: use healthy flag 2014-08-14 16:03:06 +09:00
Randy Mackay 72f6985bd8 Baro_HIL: use healthy flag 2014-08-14 16:03:04 +09:00
Randy Mackay fdb38dec5f Baro_BMP085: use healthy flag 2014-08-14 16:03:02 +09:00
Randy Mackay 330d883f97 Baro: add altitude sanity check 
healthy flag made protected
healthy accessor fn added which also check latest calculated altitude
was ok
 2014-08-14 16:02:59 +09:00
Randy Mackay e9fbea9497 Baro: make get_altitude_difference const 2014-08-14 16:02:55 +09:00
Randy Mackay af28b74944 Baro_BMP085: init members to resolve compiler warnings 2014-08-14 11:27:29 +09:00
Andrew Tridgell a400cbc922 AP_Baro: fixed example build 2014-08-13 21:46:14 +10:00
Mikhail Avkhimenia 83bbee491c AP_Baro_MS5611: add address switch for Navio board 2014-08-12 22:09:29 +10:00
Randy Mackay 5d4e019397 BaroGlitch: increase max accel to 15m/s/s 2014-08-09 15:47:52 +09:00
Andrew Tridgell 6ebff35fe2 AP_Baro: don't include I2C MS5611 on APM1 either 2014-08-03 17:17:20 +10:00
Randy Mackay fe24721218 BaroGlitch: increase default ok distance to 5m 
When taking off some copters hove a sudden baro altitude dip of 4m
 2014-08-02 11:43:06 +09:00
Randy Mackay c68d4fdfcb BaroGlitch: init members to resolve compiler warning 2014-08-01 14:07:34 +09:00
Randy Mackay 728da12441 BaroGlitch: remove debug 2014-07-29 22:05:09 +09:00
Andrew Tridgell c538cc0665 AP_Baro: fixed example build 2014-07-29 21:04:26 +10:00
Randy Mackay 2289b98d34 Baro_Glitch: initial version of baro glitch protection 
Based on GPS Glitch protection library
 2014-07-28 22:16:12 +09:00
Andrew Tridgell a458f1bf5f AP_Baro: minor improvements to Baro HIL code health check 2014-07-24 21:46:06 +10:00
Andrew Tridgell 2b3d17d955 AP_Baro: fixed APM1 build 2014-07-14 09:50:17 +10:00
Andrew Tridgell be02f0c34f AP_Baro: work around occasional 0 values from MS5611 
this was seen on the PXF board. It isn't yet known why it happens
 2014-07-14 09:44:36 +10:00
Andrew Tridgell b0ab2671cd AP_Baro: removed old device specific example code 
not needed any more
 2014-07-14 09:44:36 +10:00
Andrew Tridgell 028e2e34f1 AP_Baro: added generic baro test sketch 2014-07-14 09:44:36 +10:00
Andrew Tridgell f73ec95c39 AP_Baro_MS5611: added PROM CRC checking 
disabled on APM2 to save flash space
 2014-07-14 09:44:35 +10:00
Víctor Mayoral Vilches 8a85f8d6d2 AP_Baro_MS5611_test: Add HAL specific code. 2014-07-14 09:29:53 +10:00
Víctor Mayoral Vilches de58df6371 AP_Baro_MS5611_test: Add block for APM2-code 2014-07-14 09:29:45 +10:00
Víctor Mayoral Vilches 9797867067 AP_Baro_MS5611: Fix the test code so that compiles. 
Add HAL_BOARD_LINUX and HAL_BOARD_ERLE compatibility.
 2014-07-14 09:02:47 +10:00
Andrew Tridgell 74c3b404ee AP_Baro: avoid some float conversion warnings 2014-07-08 20:26:54 +10:00
Andrew Tridgell e118984c26 AP_Baro: save some flash and memory on APM2 
we don't need the I2C MS5611 driver
 2014-07-08 14:21:42 +10:00
Andrew Tridgell 3705c90b8e AP_Baro: fix for HAL_GPIO_* 2014-06-02 10:42:36 +10:00
Andrew Tridgell 41dd280739 AP_Baro: expose get_altitude_difference() 
this is useful for pressure altitude calculations
 2014-04-11 16:34:02 +10:00
Emile Castelnuovo f4784fe6a1 AP_Baro: new files for VRBRAIN board 2014-04-08 16:19:19 +10:00
Andrew Tridgell d3d71d597c AP_Baro: fixed example build 2014-03-19 12:14:05 +09:00
Andrew Tridgell 63234d4c22 AP_Baro: fixed linux build of BMP085 driver 2014-03-07 09:33:43 +11:00
Andrew Tridgell b2bd81f262 AP_Baro: added alternative setHIL interface 
uses pressure and temperature for better log replay
 2014-02-18 09:25:07 +11:00
Andrew Tridgell 3af38a778d AP_Baro: fixed example build 2014-02-15 06:40:15 +11:00
Randy Mackay bb715424ee Baro: fix BMP085 example sketch 2014-02-15 06:09:08 +11:00
Andrew Tridgell 6964529124 AP_Baro: _calculate can be private 2014-02-15 05:48:24 +11:00
Andrew Tridgell 2cd781997f AP_Baro: changed HIL driver to use floats and better handle starup 2014-02-15 05:48:18 +11:00
Andrew Tridgell 5e3c4441dc AP_Baro: use HAL_CPU_CLASS in baro driver 2013-12-31 10:28:37 +11:00
Andrew Tridgell 42eba615b4 AP_Baro: fixed example build 2013-12-17 11:51:37 +11:00
Andrew Tridgell 6c2e392d5d AP_Baro: fixed BMP085 examples build in autotest 2013-11-23 18:50:55 +11:00
Andrew Tridgell 8a65a729f3 AP_Baro: start MS5611 at high speed 2013-11-07 12:48:17 +11:00
Tobias 7855d242c7 AP_Baro: add time-unit comment 2013-10-27 13:39:23 +09:00
Andrew Tridgell 3393a5c99e AP_Baro: prevent a race condition in the SITL baro driver 2013-10-17 17:22:19 +11:00
Andrew Tridgell d60a68fd9c AP_Baro: check baro at exactly 100Hz 
prevent waits for samples
 2013-10-13 11:02:53 +09:00
Andrew Tridgell 6fa55d101f AP_Baro: fixed I2C semaphore handling for BMP085 driver 2013-10-08 11:50:54 +11:00
Andrew Tridgell 487caea3a5 AP_Baro: added update_calibration() method 
used for auto baro calibration when disarmed
 2013-10-05 18:44:00 +10:00
Andrew Tridgell c04d9b0c03 AP_Baro: updates for AP_HAL::MemberProc 2013-09-30 21:06:42 +10:00
Andrew Tridgell 8a699f6189 AP_Baro: enable BMP085 on Linux 2013-09-28 22:04:15 +10:00
Andrew Tridgell 20b1131059 AP_Baro: use new scheduler API 2013-09-28 21:24:03 +10:00
Mike McCauley e3c20f06ac AP_Baro: Chnages to flymaple port. 
Flymaple has no EOC pin
 2013-09-24 13:33:25 +10:00
Andrew Tridgell fc119d9b80 AP_Baro: cleaned up temperature and pressure units 
thanks to Mike McCauley for pointing this out
 2013-09-21 21:30:41 +10:00
Andrew Tridgell 97b7130bb9 libraries: update license header to GPLv3 
we switched to GPLv3 a long time ago, but neglected to update the
per-file license headers
 2013-08-30 13:01:39 +10:00
Andrew Tridgell 517c44bbaa AP_Baro: fixed example build 2013-08-30 13:01:36 +10:00
Andrew Tridgell 395739dded AP_Baro: simplify PX4 driver 
we can now rely on queueing in NuttX driver
 2013-08-30 13:01:34 +10:00
Andrew Tridgell 5607c89df0 AP_Baro: use fabs() not abs() 
thanks to Randy for spotting this
 2013-08-30 13:01:33 +10:00
Paul Riseborough ba009e55e3 AP_Baro : Fixed bug in temperature units in AP_Baro_HIL 2013-07-22 12:50:02 +10:00
Andrew Tridgell ebebee4f06 AP_Baro: extend the atmospheric model to higher altitudes 2013-07-22 12:50:02 +10:00
Andrew Tridgell 0c6725f289 AP_Baro: improved the accuracy of the barometer model 2013-07-22 12:50:01 +10:00
Andrew Tridgell 0f72401d8d AP_Baro: added GND_ALT_OFFSET parameter 
used for automatic barometric adjustment by a ground station equipped
with a barometer
 2013-07-10 14:38:57 +10:00
Paul Riseborough 7bdb098e77 AP_Baro: added get_EAS2TAS() 
this provides the scaling factor between equivalent and true airspeed
based on altitude
 2013-07-04 16:56:56 +10:00
Andrew Tridgell 61361dac9b AP_Baro: added units to baro documentation 2013-07-04 16:56:56 +10:00
Paul Riseborough 3b98bbd159 AP_Baro: more precise altitude calculation on PX4 
if not using an AVR CPU then use a more computationally expensive
altitude calculation, which is more precise at higher altitudes
 2013-07-04 16:56:56 +10:00
Randy Mackay aa2b10f044 AP_Baro: TEMP parameter comment fix 2013-06-18 11:28:36 +09:00
Andrew Tridgell ed93f80ba9 AP_Baro: fixed example build 2013-05-08 16:45:07 +10:00
Andrew Tridgell 26bf636541 AP_Baro: fixed a build warning 2013-05-02 21:31:04 +10:00
Andrew Tridgell 7cec3caf19 AP_Baro: cleaned up setHIL method 
move pressure calculation into library
 2013-05-02 15:26:38 +10:00
Andrew Tridgell c6c1fce2f1 AP_Baro: removed HIL constructor 
this wasn't calling the parent class
 2013-05-02 15:16:52 +10:00
Andrew Tridgell 2d089174cd AP_Baro: rename AP_Baro_BMP085_HIL to AP_Baro_HIL 
there is nothing specific to the BMP085 in it
 2013-05-02 15:08:42 +10:00
Andrew Tridgell d7ec985029 AP_Baro_PX4: fixed baro driver to run at full rate 
we were skipping samples due to a timer handling bug. It now checks
for new samples at 100Hz
 2013-05-01 08:54:53 +10:00
Janne Mäntyharju 7a04fe9915 AP_Baro: Fixed build for APM2 Beta hardware 2013-04-16 11:24:38 +10:00
Andrew Tridgell f0469a21f2 AP_Baro: fixed timestamp on baro for PX4 
milliseconds not microseconds
 2013-01-22 21:22:01 +11:00
Andrew Tridgell b9b3ef91a1 AP_Baro: added timer to PX4 driver 
this gives us more samples when main sketch is reading slowly
 2013-01-21 18:20:05 +11:00
Andrew Tridgell 6a5421a361 AP_Baro: ask for maximum poll rate for PX4 2013-01-21 08:27:02 +11:00
Andrew Tridgell 74f7b0f218 AP_Baro: added accumulate method to PX4 driver, and fixed scaling 2013-01-20 22:13:21 +11:00
James Bielman 4fa7bb1486 Add AVR compatibility header for missing math.h definitions. 
- Define float versions of math functions to the double versions
  on AVR (eg. #define sinf sin).
- These macros appear to be missing in older versions of avr-libs.
- Include AP_Math.h rather than math.h to get these definitions.
 2013-01-16 13:52:17 +11:00
James Bielman 5631f865b2 Update floating point calculations to use floats instead of doubles. 
- Allows use of hardware floating point on the Cortex-M4.
- Added "f" suffix to floating point literals.
- Call floating point versions of stdlib math functions.
 2013-01-16 13:52:01 +11:00
Andrew Tridgell 2fe4656a50 Merge pull request #4 from GaloisInc/master 
Thanks Pat!
 2013-01-10 17:24:59 -08:00
James Bielman 25d078e2bd AP_Baro_MS5611: Don't panic if taking semaphore fails during init. 
- The MPU6000 holds on to the I2C semaphore for quite some time during
  init, which caused a panic when the MS5611 is also on I2C.
 2013-01-10 14:22:41 -08:00
Andrew Tridgell 2c603a0960 AP_Baro: only build BMP085 driver on APM1 2013-01-10 21:01:07 +11:00
Andrew Tridgell 8cb0ed364a AP_Baro: read 4 pressure values for every temperature value on BMP085 2013-01-09 23:44:26 +11:00
Andrew Tridgell 1ce1fa3864 AP_Baro: update example to use accumulate() 2013-01-09 23:06:24 +11:00
Andrew Tridgell 8ceabc97f1 AP_Baro: added accumulate() function 
this allows us to read the BMP085 much faster
 2013-01-09 23:05:17 +11:00
Andrew Tridgell 9b972af307 AP_Baro: skip timer if we don't get the SPI semaphore 2013-01-09 20:27:48 +11:00
James Bielman eca1417858 AP_HAL: Add semaphores to I2C driver. 
- Guard I2C transactions with this semaphore in the MS5611 and
  HMC5843 drivers.
 2013-01-04 15:43:43 -08:00
Andrew Tridgell c15bf95e19 AP_Baro: fixed example build on AVR 2013-01-04 22:45:02 +11:00
Andrew Tridgell aa64a41512 AP_Baro: removed debug line 2013-01-04 22:26:51 +11:00
Andrew Tridgell 4fe7ad6267 AP_Baro: added averaging to PX4 baro driver 2013-01-04 21:08:20 +11:00
Andrew Tridgell dbcaa4cf3c AP_Baro: average over multiple samples in PX4 baro driver 2013-01-04 20:11:30 +11:00
Andrew Tridgell 2ac6541526 AP_Baro: added PX4 barometer driver 2013-01-04 14:58:24 +11:00
James Bielman d84ba8ef59 Use HAL suspend/resume timer procs rather than atomic. 
- Preparation for removing begin/end atomic.
 2013-01-03 17:33:13 -08:00
Pat Hickey 5d91f342bb AP_Baro_MS5611: uses new semaphore lib 2013-01-03 13:48:07 -08:00
James Bielman 264db3670e AP_Baro: Add CONFIG_MS5611_SERIAL option to choose between SPI and I2C. 
- Update ArduCopter and ArduPlane modules to pass the correct serial
  driver to the MS5611 driver.
- Update barometer examples, assuming SPI.
 2013-01-03 13:48:06 -08:00
James Bielman 5753ae5692 AP_Baro: Add I2C support to MS5611 driver. 2013-01-03 13:48:06 -08:00
Andrew Tridgell 374af1cd14 build: change from Arduino.mk to apm.mk 2013-01-02 17:29:37 +11:00
Andrew Tridgell c5ba33d39a AP_Baro: fixed MS5611 semaphore handling 2012-12-21 19:33:57 +11:00
Andrew Tridgell 3aa39da6cd AP_Baro: removed some debug code 2012-12-20 14:53:23 +11:00
Andrew Tridgell a1187519a8 AP_HAL: use AP_HAL_BOARD_DRIVER in remaining test sketches 2012-12-20 14:52:37 +11:00
Andrew Tridgell c15eb97c8d AP_Baro: fixed example build 2012-12-20 14:52:36 +11:00
Pat Hickey eb530b86e8 move Arduino.mk to /mk/Arduino.mk 2012-12-20 14:52:35 +11:00
Pat Hickey 107ab1a694 AP_Baro: translated to SPI transactions 2012-12-20 14:52:32 +11:00
Pat Hickey d92e8045c1 AP_Baro: uses scheduler panic 2012-12-20 14:52:31 +11:00
Pat Hickey 2c2279722b AP_Baro_MS5611: use scheduler panic 2012-12-20 14:52:31 +11:00
Andrew Tridgell 7d27e420ae AP_HAL: remove unnecessary Arduino.h includes 2012-12-20 14:52:30 +11:00
Andrew Tridgell 4a54ffb523 Baro: use local include to reduce boilerplate 2012-12-20 14:52:30 +11:00
Andrew Tridgell dbd9814327 AP_Baro: get rid of apm2_hardware parameter in init 2012-12-20 14:51:38 +11:00
Andrew Tridgell cafeaf91d6 AP_Baro: updates for new AP_Param API 2012-12-20 14:51:38 +11:00
Pat Hickey 475da4eca4 CONFIG_HAL_BOARD - test sketches fixed up, build all passes 2012-12-20 14:51:37 +11:00
Andrew Tridgell 2ea243e45b AP_Baro: removed unused code 2012-12-20 14:51:37 +11:00
Pat Hickey bfd03ab40c AP_Baro: robust spi device 2012-12-20 14:51:35 +11:00
Pat Hickey 60f7788be4 AP_Baro: robust calibration 2012-12-20 14:51:35 +11:00
Pat Hickey eaa0a990a4 AP_Baro: MS5611 robust semaphores 2012-12-20 14:51:35 +11:00
Pat Hickey 52925b655f AP_Baro: MS5611 uses delay in busy wait 2012-12-20 14:51:35 +11:00
Pat Hickey c1114168e4 AP_Baro tests rebase fixups 2012-12-20 14:51:29 +11:00
Pat Hickey a4f1f6a5db AP_Progmem: fix dependencies for all sketches touched by AP_HAL_AVR 2012-12-20 14:51:28 +11:00
Pat Hickey 668caa4a2e Fix calls to AP_HAL::Scheduler::register_timer_process 2012-12-20 14:51:27 +11:00
Pat Hickey 5d40074e4e AP_Baro: port to AP_HAL 2012-12-20 14:51:26 +11:00
Pat Hickey 3f1d9d7f69 AP_Param: #include <AP_Param.h> fixups for libraries & sketches 
* I mostly went through with grep and added an #include <AP_Param.h> below
  every #include <AP_Common.h>. Not all of these example sketches might
  strictly need AP_Param.
 2012-12-20 14:51:19 +11:00
Andrew Tridgell 3552f3f9c5 AP_Baro: fixed example build 2012-11-24 21:07:41 +11:00
Andrew Tridgell e331634bc5 AP_Baro: switch to SREG = oldSREG pattern for interrupt mask/restore 2012-11-20 22:31:17 +11:00
rmackay9 56f88821e9 AP_AHRS: fix example sketch 
AP_Airspeed: fix example sketch
AP_Baro: fix example sketch
AP_Declination: fix example sketch
AP_Math: fix example sketch
 2012-11-08 00:08:18 +09:00
rmackay9 1c7118a2d1 AP_Baro: added get_last_update which returns the time the barometer sensor was last read 2012-11-07 19:21:25 +09:00
Andrew Tridgell e5846bd965 AP_Baro: removed _sync_access check 
this isn't needed as the common variables are already protected by
cli()/sei()
 2012-09-20 17:34:33 +10:00
uncrustify 4cd6657f70 uncrustify libraries/AP_Baro/AP_Baro_BMP085_hil.h 2012-08-21 19:19:51 -07:00
uncrustify fa90f0b80f uncrustify libraries/AP_Baro/AP_Baro.h 2012-08-21 19:00:51 -07:00
uncrustify 1196285266 uncrustify libraries/AP_Baro/AP_Baro_MS5611.h 2012-08-21 19:00:50 -07:00
uncrustify cfcef93e16 uncrustify libraries/AP_Baro/AP_Baro_BMP085.h 2012-08-21 19:00:50 -07:00
uncrustify 5a99d6b697 uncrustify libraries/AP_Baro/AP_Baro_BMP085.cpp 2012-08-21 19:00:18 -07:00
uncrustify b0003c020f uncrustify libraries/AP_Baro/AP_Baro_MS5611.cpp 2012-08-21 19:00:18 -07:00
uncrustify b39411e8d4 uncrustify libraries/AP_Baro/AP_Baro_BMP085_hil.cpp 2012-08-21 19:00:18 -07:00
uncrustify 6f02a645c3 uncrustify libraries/AP_Baro/AP_Baro.cpp 2012-08-21 19:00:18 -07:00
uncrustify 12497c51b5 uncrustify libraries/AP_Baro/examples/AP_Baro_MS5611_test/AP_Baro_MS5611_test.pde 2012-08-21 19:00:18 -07:00