Andrew Tridgell
e1792f89db
AP_HAL: fixed default HAL_STORAGE_SIZE for flash storage
2020-04-14 10:02:51 +10:00
Peter Barker
73e43d8da5
AP_HAL: send statustext at regular intervals after watchdog reset
2020-03-31 14:30:11 +11:00
bugobliterator
afea703aaf
AP_HAL: ensure libc realloc is available for all platforms except ChibiOS
2020-03-24 10:32:14 +11:00
bugobliterator
c615bd9874
AP_HAL: implement standard realloc method
2020-03-24 10:32:14 +11:00
Peter Barker
a59c3670c8
AP_HAL_ChibiOS: stash lr_thd in watchdog hardfault handler
2020-03-19 16:03:58 +11:00
Andrew Tridgell
add7615ed9
AP_HAL: removed unnecessary subtypes
2020-03-14 08:35:32 +11:00
Andrew Tridgell
58b4b523fd
AP_HAL: added in_expected_delay()
...
allows for error message suppression when delays are expected
2020-03-11 16:30:06 +11:00
Peter Hall
6ab13333c2
AP_HAL: support ProfiLEDs
2020-03-10 10:37:26 +11:00
Peter Barker
09562e1f13
AP_HAL_Linux: use constants for high/low rather than defines, like ChibiOS
...
These are really bad defines to have hanging around for general use.
2020-03-03 10:46:06 +11:00
Andrew Tridgell
5d15d867b5
AP_HAL: adjust LED API to allow more than 32 LEDs on a pin
2020-02-27 13:12:26 +11:00
Andy Piper
509341957f
AP_HAL: check for div0 in quinn's estimator
2020-02-25 08:35:09 +11:00
Andy Piper
f4a99a1589
AP_HAL: hardware abstraction for FFT.
...
control inclusion of FFT based on HAL_WITH_DSP and HAL_GYROFFT_ENABLED. target appropriate ARM cpus
define hanning window and quinn's estimator
start/analyse version of FFT to support threading
allocate memory in a specific region
calculate frequency and noise bandwidth of two noisiest peaks
control inclusion of DSP based on board size
2020-02-22 11:15:37 +11:00
Peter Hall
2bd6d4674b
AP_HAL: utility: add thread safe ring buffer duplicate
2020-02-12 07:05:05 +11:00
Willian Galvani
4afdff746e
AP_HAL: Fix Navigator orientation
...
The Rev2 prototype board had the IMU rotated
2020-02-04 22:47:16 -05:00
Randy Mackay
a71ae54d3a
AP_HAL: add RCOutput::get_output_mode_banner
2020-02-04 12:23:33 +11:00
Andrew Tridgell
3105c6a050
AP_HAL: added pulse_input_enable() API
...
this allows disabling pulse input at runtime to lower CPU load on
IOMCU when decoding via a UART
2020-01-31 11:09:07 +11:00
Peter Barker
1344827c07
AP_HAL: add empty overridable trap method
2020-01-29 10:27:01 +11:00
Andrew Tridgell
f683741a9c
AP_HAL: make all semaphores recursive
...
the cost is very similar and this prevents an easy coding error which
can occur on less used code paths
2020-01-19 20:19:30 +11:00
Andrew Tridgell
629ebbb8ea
AP_HAL: removed old PX4 define
2020-01-18 17:01:40 +11:00
Patrick José Pereira
dc44a17c46
AP_HAL: Add navigator board
...
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2020-01-16 08:01:54 +11:00
Peter Barker
f6bb94ff33
AP_HAL: add missing break statement in dsm code
2020-01-15 13:55:42 +11:00
Andrew Tridgell
4eccea2607
AP_HAL: define more UART option bits
2020-01-03 17:32:23 +11:00
Andrew Tridgell
12b6f73d83
AP_HAL: added erase() method to Storage class
2020-01-02 09:52:57 +11:00
Andy Piper
22d6fd5e1f
AP_HAL: update docs for ObjectBuffer
2019-12-10 21:07:58 +11:00
Peter Barker
10c50844fd
AP_HAL: stop emitting extra CR before a LF as part of our printf
2019-11-08 17:37:04 +11:00
Peter Barker
3f9a4ee5f9
AP_HAL: fix unit test compilation due to -Werror=format-truncation
2019-11-06 21:42:18 +11:00
Andrew Tridgell
29a2351fd0
AP_HAL: rename AP_HAL::CAN to AP_HAL::CANHal
...
avoid conflict with ChibiOS STM32F3xx headers
2019-11-01 10:53:53 +11:00
Andrew Tridgell
9a778418a5
AP_HAL: use enum for flash_bootloader() result
2019-10-25 21:36:55 +11:00
Andrew Tridgell
15d98220e0
AP_HAL: enabled SLCAN on fmuv2 and Pixhawk1-1M
...
this fits for now, and is needed for CAN GPS for now
2019-10-08 10:02:14 +11:00
Andrew Tridgell
53fab5767f
AP_HAL: cleanup ifdefs for SLCAN enable
2019-10-08 10:02:14 +11:00
Andrew Tridgell
2d00298070
AP_HAL: added HAL_MEM_CLASS for amount of memory
2019-10-01 09:29:55 +10:00
Andrew Tridgell
81711eb28e
AP_HAL: fixed build on g++ 7.3 for stm32
...
the system maths headers don't like our maths defines, but are happy
if we include math.h first
2019-09-28 14:19:46 +10:00
Peter Barker
5dad0e5410
AP_HAL: a few more simple tests for snprintf
2019-09-12 16:08:59 +10:00
Peter Barker
412bf24b9a
AP_HAL: add gtests for snprintf
2019-09-12 07:42:40 +10:00
Peter Barker
10675ab5c4
AP_HAL: correct include ordering in srxl.h
...
The header needs stdint.h which it was only getting because it was
included after stdint.h in the cpp file.
Stop including standard headers before other ArduPilot headers
2019-09-11 14:19:14 +10:00
Andrew Tridgell
4197fdeb2a
AP_HAL: fixed bug in vsnprintf()
...
we need to return the number of bytes that would have been printed if
the buffer was big enough to support use cases such as vasprintf()
which needs to know how many bytes to allocate
2019-09-11 13:41:03 +10:00
Andrew Tridgell
1cb608a9f4
AP_HAL: allow neopixel LEDs to be set more flexibly
...
allow for N leds per chain, with RGB control of each
2019-09-10 13:03:28 +10:00
Tom Pittenger
e3416b66dc
AP_HAL_ChibiOS: add Neopixel output type, similar to dshot
2019-09-10 13:03:28 +10:00
Andrew Tridgell
6983186210
AP_HAL: added get_options() method on UARTs
2019-09-06 08:51:45 +10:00
Andrew Tridgell
2bc7db4cca
AP_HAL: removed old HAL_COMPASS_ defines (no longer used)
2019-09-04 16:27:47 +10:00
Andrew Tridgell
43e011c7a8
AP_HAL: convert Linux compass specification to new probe list
...
this avoids the special handling in AP_Compass library
2019-09-04 16:27:47 +10:00
Michael du Breuil
c12652b325
AP_Rangefinder: Remove stop pin usage
2019-09-04 09:54:50 +10:00
Michael du Breuil
927a0521e3
AP_HAL: Remove the empty force_safety_no_wait
2019-09-04 07:14:50 +10:00
Andrew Tridgell
7fa6eeaaed
AP_HAL: remove unused HAL_BARO_ defines
2019-08-28 06:54:11 +10:00
Andrew Tridgell
9d94598235
AP_HAL: convert linux boards to use baro probe list
2019-08-28 06:54:11 +10:00
Andrew Tridgell
60a6f1b04a
AP_HAL: removed most HAL_INS_* defines
...
not used any more
2019-08-28 06:54:11 +10:00
Andrew Tridgell
96180018fb
AP_HAL: convert HAL_Linux to use HAL_INS_PROBE_LIST
...
makes for much simpler addition of new boards, especially with more
than one IMU
2019-08-28 06:54:11 +10:00
Andrew Tridgell
24e05e96e7
AP_HAL: define support for LIS3MDL_I2C and RM3100_SPI
2019-08-27 10:29:56 +10:00
Michael du Breuil
e47f97c5d3
AP_HAL: Fix bad buffer termination
2019-08-26 18:57:59 +01:00
Andrew Tridgell
9741ac0b64
AP_HAL: added I2C ISR count to PersistentData
2019-08-26 09:13:39 +10:00
Andrew Tridgell
c5c96c76ee
AP_HAL: added logging of hardware fault information in watchdog
...
this may help trackdown software bugs that trigger hard faults
2019-07-19 16:02:41 +10:00
murata
2e4dda5ece
AP_HAL: Match output type and variable type
2019-07-16 10:11:13 +10:00
Andrew Tridgell
bee487e9da
AP_HAL: added uartH
2019-07-12 17:01:21 +10:00
Siddharth Purohit
c50912ed6a
AP_HAL: define HAL_HAVE_DUAL_USB_CDC if not defined
2019-07-12 17:01:21 +10:00
Andrew Tridgell
5ffb8bb546
AP_HAL: enable GPIO scripting on the Disco
2019-07-06 09:02:54 +10:00
Andrew Tridgell
0ca71ba725
AP_HAL: added get_last_armed_change() Util function
2019-06-21 11:40:53 +10:00
Peter Barker
92111eea61
AP_HAL: require HALs implement rcin.protocol() to return RC protocol
2019-06-18 11:35:38 +10:00
Peter Barker
b902316139
AP_HAL: remove buggy write implementation
2019-06-17 17:20:57 +10:00
Peter Barker
c3a99c8eb0
AP_HAL: move dump_strack_trace into HAL
...
Use a weak definition to allow subclasses to override
2019-06-13 09:25:42 +10:00
heitiane
931367a7ea
AP_HAL: fix RCOutput, RCOutput2 and RCInputToRCOutput examples to prevent the failure of reading and writing channels.
2019-06-11 10:27:44 +10:00
Vincent
3177d24429
AP_HAL: Make linux hardware define more readable
2019-06-04 10:00:09 +10:00
Andrew Tridgell
4c5b651296
AP_HAL: removed board type for mRoControlZeroF7
2019-05-30 15:39:57 +10:00
Pierre Kancir
a4330f90b1
AP_HAL: add HAL_BARO_LPS22H_I2C
2019-05-22 07:37:20 +10:00
Patrick José Pereira
fe3d4e2c3b
AP_HAL: Utility: Add missing header guard in packetise
...
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2019-05-20 23:50:23 +01:00
Andrew Tridgell
e64c5ef354
AP_HAL: added SPI and I2C counters
2019-05-17 08:56:06 +10:00
Andrew Tridgell
911a99b79e
AP_HAL: removed hal argument to EXPECT_DELAY_MS()
2019-05-15 15:33:48 +10:00
Andrew Tridgell
c786674442
AP_HAL: record mavlink msg IDs and semaphore line
2019-05-15 15:33:48 +10:00
Andrew Tridgell
b1ed77bee9
AP_HAL: added EXPECT_DELAY() macro
...
this prevents nesting errors in use of EXPECT_DELAY(), ensuring we
always close the expected delay
2019-05-15 15:33:48 +10:00
Andrew Tridgell
8f973da4b5
AP_HAL: moved the WITH_SEMAPHORE() logic into AP_HAL
...
this is needed to allow us to record the location of a blocking
semaphore to track down bugs where we have a semaphore deadlock
2019-05-15 15:33:48 +10:00
Andrew Tridgell
45d5e7f6d2
AP_HAL: added persistance for internal errors
2019-05-15 15:33:48 +10:00
Andrew Tridgell
4b298aa80e
AP_HAL: add scheduler state to persistent_data
2019-05-15 15:33:48 +10:00
Andrew Tridgell
11c123e4da
AP_HAL: added persistent_data structure
...
this is a much simpler way to save data for a watchdog reset
2019-05-15 15:33:48 +10:00
Phillip Kocmoud
db57b6c4f3
AP_HAL: added DPS280 on SPI / added board type for mRoControlZeroF7
2019-05-10 15:05:42 +10:00
Andrew Tridgell
c63459c237
AP_HAL: added save/restore of attitude in backup registers
2019-04-22 16:53:35 +10:00
Andrew Tridgell
bd84c0a8df
AP_HAL: added save/restore of home to backup registers
2019-04-22 16:53:35 +10:00
Andrew Tridgell
4a3687fcf6
AP_HAL: added was_watchdog_armed()
...
allow decisions to be based on whether this is a watchdog reset and we
were armed
2019-04-22 16:53:35 +10:00
Andrew Tridgell
8d2f094257
AP_HAL: added was_watchdog_safety_off()
...
used to restore safety state on watchdog reset
2019-04-22 16:53:35 +10:00
Andrew Tridgell
88352b73bb
AP_HAL: added expect_delay_ms() to Scheduler
...
used to notify scheduler of long expected delay in main thread
2019-04-22 16:53:35 +10:00
Andrew Tridgell
7f96d4ad12
AP_HAL: added was_watchdog_reset()
2019-04-22 16:53:35 +10:00
Andrew Tridgell
65d051cbc9
AP_HAL: added hal.flash driver
...
needed for semaphore
2019-04-11 13:22:53 +10:00
murata
dc452d41d2
AP_HAL: Change to shared CRC16 method
2019-04-09 12:50:17 +10:00
Siddharth Purohit
0d4725d6c6
HAL: add Invensense register bank based sensor types
2019-03-06 20:47:10 +11:00
Andrew Tridgell
20d762293d
AP_HAL: remove more px4 remnants
2019-02-27 20:32:37 +11:00
Andrew Tridgell
dcc038dc83
AP_HAL: prevent a zero length leading buffer in peekiovec
2019-02-26 16:18:26 +11:00
Peter Barker
8efda2b792
AP_HAL: GCS_MAVLink takes care of mavlink capabilities
2019-02-19 13:14:52 +11:00
Peter Barker
e4e453402c
AP_HAL: rearrange headers for consistency
...
Move attribute definitions all into AP_Common, rather than being split between two files
Remove unused SITL_printf macros
Stop AP_Common including board information
Include AP_Common.h in AP_HAL::Sempahore for WARN_IF_UNUSED; this was the cause of a circular import problem fixed by other commits in this patch.
2019-02-15 08:15:45 +11:00
LukeMike
e15d2c0f89
HAL_ChibiOS: added ChibiOS configuration of VR Brain 5.4
2019-01-24 18:41:38 +11:00
LukeMike
33f7f5b7b6
HAL_ChibiOS: added ChibiOS configuration for VR Core 1.0
2019-01-24 18:41:38 +11:00
LukeMike
f615ab9a0a
HAL_ChibiOS: added ChibiOS configuration for VR Brain 5.1
2019-01-24 18:41:38 +11:00
Siddharth Purohit
504cfd8989
AP_HAL: add flag for enable/disabling filters
2019-01-23 15:57:05 +11:00
Andrew Tridgell
c04f1180c9
AP_HAL: removed F4Light
2019-01-21 21:57:21 +11:00
mirkix
506da9ac42
AP_HAL: enable UAVCAN for bbbmini, blue and pocket
2019-01-21 08:08:59 +11:00
Randy Mackay
06bb02fab7
AP_HAL: minor format fixes to CAN
2019-01-18 17:30:28 +11:00
LukeMike
45c5979999
AP_HAL: added define of ChibiOS sub type for VR Brain boards
2019-01-18 11:49:19 +11:00
Michael du Breuil
44079dcc46
AP_HAL: Add scripting heap
2018-12-31 19:25:23 -07:00
Andrew Tridgell
4889625826
AP_HAL: added set_slowdown() to SPIDevice
...
used to slow down a SPI device below normal high speed operation
2018-12-31 08:00:14 +11:00
Andrew Tridgell
d8cf1997d2
AP_HAL: added fs_init() to Util API
2018-12-31 08:00:14 +11:00
Andrew Tridgell
1fd1614e34
AP_HAL: added locking against read for UARTs
2018-12-29 15:58:22 +11:00
Peter Barker
24653a33ed
SITL: make socket manipulation functions bool rather than void
...
... so callers can check if they succeeded or not
2018-12-18 08:51:01 +11:00
Peter Barker
8a0e3dd657
AP_HAL: add millis16 to HAL; provide weak implementation
...
This wraps every minute or so - but if you only need to track intervals
under ~65 seconds could save RAM
2018-12-10 12:52:41 +09:00
Andrew Tridgell
8907506c18
AP_HAL: added replacement for memrchr()
2018-12-06 13:32:09 +11:00
Andrew Tridgell
a0be4f4c8d
AP_HAL: fixed build and comments
2018-12-06 11:12:40 +11:00
Andrew Tridgell
d01f5ae6c8
AP_HAL: added mavlink_packetise()
...
used for aligning MAVLink packets on UDP on packet boundaries
2018-12-06 11:12:40 +11:00
Andrew Tridgell
4cfb1b04ad
AP_HAL: define HAL_BOARD_STORAGE_DIRECTORY for sitl, px4 and chibios
2018-11-29 16:36:29 +11:00
Siddharth Purohit
df7d0d1971
AP_HAL: add support for unformatted board id
2018-11-29 16:36:29 +11:00
Andrew Tridgell
e629845f00
AP_HAL: minimize features on px4-v1
2018-11-26 13:29:40 +11:00
Andrew Tridgell
bed7939969
AP_HAL: added support for swapping RX and TX pins
2018-11-20 18:25:20 +11:00
Andrew Tridgell
f2cd6e9a05
AP_HAL: added set_reversible_mask()
2018-11-16 08:33:35 +11:00
Andrew Tridgell
a4c532edff
AP_HAL: fixed typo in fmax macro
2018-11-15 14:39:11 +11:00
Andrew Tridgell
58ed5a123c
AP_HAL: added HalfDuplex UART option
2018-11-14 19:05:09 +11:00
Andrew Tridgell
37fc6e8b1c
AP_HAL: added inversion options
2018-11-14 19:05:09 +11:00
Michael du Breuil
9a9e715af8
AP_HAL: Define HAL_HAVE_SERVO_VOLTAGE
2018-11-12 23:29:04 +00:00
Andrew Tridgell
9ea03e085d
AP_HAL: added readptr() and advance() to ObjectBuffer
...
this gives a more efficient way of accessing an ObjectBuffer, which
reduces interrupt latency in SoftSigReader
2018-11-07 07:35:45 +11:00
Andrew Tridgell
6c6dabc33c
AP_HAL: set default batt monitoring for bebop and disco
2018-10-31 20:30:35 +11:00
Peter Barker
f8b1203399
AP_HAL: provide method returning approximate link bandwidth
2018-10-30 19:31:37 +11:00
Kevin Lopez Alvarez
ab7c7afd1d
AP_HAL: add ChibiOS FMUv4pro
2018-10-21 09:59:44 +11:00
Peter Barker
f90dd0c156
AP_HAL: add simple tests for null-termination
2018-10-21 07:54:30 +11:00
Peter Barker
33e3d6e254
AP_HAL: Util: make vsnprintf and snprintf always null-terminate
...
The C++ standard indicates these functions always return a
null-terminated string. We should rename these functions if we're not
going to conform to the standards.
From https://en.cppreference.com/w/cpp/io/c/vfprintf :
"Writes the results to a character string buffer. At most buf_size-1
characters are written. The resulting character string will be
terminated with a null character"
We are still not standards-compliant in the case a length of 0 is passed
in, returning 0 where we should return the space that would be required
to store the formatted string.
2018-10-21 07:54:30 +11:00
Andrew Tridgell
5924816bbe
AP_HAL: removed hal.util->new_semaphore()
...
replaced with HAL_Semaphore
2018-10-17 12:54:22 +11:00
Andrew Tridgell
ed71790945
AP_HAL: fixed PX4 LED polarity
2018-10-09 20:25:49 +09:00
Michael du Breuil
73901274b0
AP_HAL: Define a scripting base priority
2018-10-09 10:08:52 +11:00
Michael du Breuil
6544f16339
AP_HAL: Make BBBlue use AP_BoardLED2
2018-09-19 22:58:46 +01:00
Michael du Breuil
6f7ced73d6
AP_HAL: Remove bad GPIO LED pins on NavIO2
2018-09-19 22:58:46 +01:00
Siddharth Purohit
9a2eea9769
AP_HAL: disable float print methods for non FPU controllers
2018-09-19 12:14:15 +10:00
Siddharth Purohit
5e4f76886a
AP_HAL: add chibios hal header to use uC specific defines
2018-09-19 12:14:15 +10:00
Siddharth Purohit
c546bec999
AP_HAL: do not use ch for channel, its used as a global var under ChibiOS
2018-09-19 12:14:15 +10:00
Andrew Tridgell
eec3a2ab31
AP_HAL: added FOREACH_I2C_MASK() macro
2018-09-07 08:36:02 +10:00
Andrew Tridgell
b4ecc347d7
AP_HAL: always define HAL_WITH_UAVCAN on px4
2018-09-05 08:52:47 +10:00
Peter Barker
15ae453205
AP_HAL: fix RCInput example
2018-08-31 21:08:11 +09:00
Peter Barker
fcacdb42bb
AP_HAL: define base-class attach_interrupt to return false
2018-08-31 08:32:08 +10:00
Andrew Tridgell
55dfefb2d6
AP_HAL: added HAL_Semaphore_Recursive
2018-08-25 15:44:36 +10:00
Peter Barker
74263f8412
AP_HAL: add attach_interrupt that takes a functor, not a AP_HAL::Proc
...
AP_HAL: add type-safety for interrupt types
AP_HAL: remove interrupt-low and interrupt-high, and interrupt-none
It is possible that the radio needs very tight timings - do not force
the use of the functor interface
AP_HAL: add detach_interrupt method
2018-08-21 20:34:01 +09:00
Peter Barker
c846a13d12
AP_HAL: functor: add != override
2018-08-21 20:34:01 +09:00
Andrew Tridgell
0a73c3492d
AP_HAL: support HAL_Semaphore type
2018-08-16 12:40:10 +10:00
Hwurzburg
5f72c9040e
AP_OSD: Adding flight distance and summary panels for OSD
2018-08-16 12:00:50 +10:00
Francisco Ferreira
0645a5b11a
AP_HAL: introduce a CANProtocol interface and remove HAL CAN thread management
2018-08-12 13:35:01 +01:00
Andrew Tridgell
1fe6c7b497
AP_HAL: added chanmask to serial_setup_output()
2018-08-04 19:29:13 +10:00
Lucas De Marchi
099eefee87
AP_HAL: Chibios: HAL_GPIO_PIN_SAFETY_IN implies HAL_HAVE_SAFETY_SWITCH
2018-08-02 13:15:02 -07:00
Lucas De Marchi
7f984f2700
AP_HAL: linux: disable safety switch
...
Linux boards don't really handle the safety switch.
2018-08-02 13:15:02 -07:00
Lucas De Marchi
2336d2214b
AP_HAL: sitl: disable safety switch
...
sitl doesn't really handle the safety switch and it's actually disabled
by AP_FEATURE_SAFETY_BUTTON.
2018-08-02 13:15:02 -07:00
Andrew Tridgell
949324ff2b
AP_HAL: added duration to toneAlarm_set_buzzer_tone
2018-07-30 14:02:12 +10:00
Jonathan Challinger
f936b1dbc2
AP_HAL: change tonealarm interface
2018-07-30 14:02:12 +10:00
Andrew Tridgell
cb19d4dffc
AP_HAL: added toneAlarm_set_tune_string
2018-07-20 14:37:16 +10:00
Andrew Tridgell
0fc6ca22f7
AP_HAL: setup HAL_I2C_INTERNAL_MASK for ChibiOS
2018-07-14 17:51:50 +10:00
Andrew Tridgell
464dc9102f
AP_HAL: added device types for SITL
...
and fixed a stack init bug for make_bus_id
2018-07-13 10:19:01 +10:00
Michael du Breuil
3419b045e1
AP_HAL: Remove GPIO::analogPinToDigitalPin()
2018-07-11 23:09:52 -07:00
Andrew Tridgell
d35abe67ae
AP_HAL: added optional healthy check on storage object
...
used to check parameter storage is functional
2018-07-10 15:41:44 +10:00
Andrew Tridgell
4939f30ec4
AP_HAL: make linux internal i2c be 0xffff
...
based on feedback from Lucas
2018-07-10 15:39:47 +10:00
Andrew Tridgell
b19219d636
HAL_Linux: allow for 16 I2C buses on Linux
2018-07-10 15:39:47 +10:00
Andrew Tridgell
281a1b6569
AP_HAL: added I2C bus mask functions and macros
2018-07-10 15:39:47 +10:00
Andrew Tridgell
e14e0b8a14
AP_HAL: added thread_create() API
...
this is deliberately a minimalistic API, for ease of implementation in
each HAL
2018-07-09 19:41:18 +10:00
Andrew Tridgell
eb2c9dfe74
AP_HAL: define CHIBIOS_SHORT_BOARD_NAME if not defined
2018-06-29 20:27:36 +10:00
Andrew Tridgell
d1fcf2bab6
AP_HAL: added uartG
...
one more uart ...
2018-06-29 08:17:38 +10:00
Peter Barker
b9b0ef0c77
AP_HAL: add flash_bootloader to AP_HAL API
2018-06-28 11:35:13 +10:00
Michael du Breuil
2577e5ff25
AP_HAL: Don't always define GPIO pins, they may be connected to real
...
hardware
2018-06-27 15:25:44 +10:00
Lucas De Marchi
49d08ba72a
Global: remove minlure
...
Minlure is a port of ArduPilot to Minnow Board connected to daughter
board. Very few of those were produced and nobody is flying with it.
It served its purpose and all the the improvements to ArduPilot remain
regardless of it not being supported anymore. Now it's just adding
maintenance work with no clear benefit, so pull the plug.
2018-06-26 07:32:08 -07:00
Michael du Breuil
a92c4aa9fd
AP_HAL: Update comment on UARTDriver::begin to reflect automatic
...
clearing
2018-06-26 02:18:18 +01:00
Kelly-Foster
ba9faafc98
AP_HAL: added MatekF405-wing subtype
...
Added define for HAL_BOARD_SUBTYPE_CHIBIOS_MATEKF405WING
2018-06-22 08:00:31 +10:00
Hyungsub
6e2076a3f1
AP_HAL: Remove resource leak in srxl.cpp
...
I correct this issues and then open a pull request.
2018-06-20 11:33:12 +10:00
Peter Barker
584c5d5806
AP_HAL: Socket: add set_cloexec
2018-06-19 09:14:28 +10:00
Peter Barker
f5eb281efd
AP_HAL: use AP_RTC
...
Also add a define as to whether set_time / get_time can be used
2018-06-15 08:01:22 +10:00
Michael du Breuil
1183ed61fb
AP_HAL: Remove timer process suspension interface
2018-06-06 07:16:58 +10:00
Andrew Tridgell
0774a267c8
AP_HAL: added define for FMUv5
2018-06-06 07:15:41 +10:00
Michael du Breuil
627c7536f4
AP_HAL: Remove overrides interface
2018-06-05 09:51:09 +10:00
Andrew Tridgell
d28283e302
AP_HAL: added clock_pulse() method to SPIDevice
...
this is used by SPI SDCard interface for HAL_ChibiOS
2018-05-27 19:10:24 +10:00
Andrew Tridgell
e2ea654b77
AP_HAL: added take_blocking() method
...
this avoids the need to check return result
2018-05-25 13:53:17 +10:00
Eugene Shamaev
c410feefa1
AP_HAL: add CAN bus declaration for the intel aero board
2018-05-25 13:53:17 +10:00
Lucas De Marchi
ff6e76ea6a
AP_HAL_Linux: add custom storage directory
2018-05-24 08:00:33 -07:00
Lucas De Marchi
a56106cccb
AP_HAL: use buildsystem for default directories
2018-05-24 08:00:33 -07:00
Lucas De Marchi
1e7ad72909
AP_HAL: use default storage for more boards
...
Boards from Emlid, Erle Robotics and BBB-like ones were agreed to be
changed #7100 . Here I'm also change some more, just because they appear
to be using the old default just because of copy and paste. We can
always revert back if we get complains and it seems something trivial.
Almost all boards now are using the the default path for logs, terrain
and params, except those that have restrictions to do so, like ones
using custom distros.
2018-05-24 08:00:33 -07:00
Eugene Shamaev
9a22e11b92
AP_HAL: HAL_RCINPUT_WITH_AP_RADIO definition
...
Remove moved skyviper-v2450-px4 definitions
Co-authored-by: Francisco Ferreira <OXINARF@users.noreply.github.com>
2018-05-22 08:35:01 +09:00
Andrew Tridgell
b887a1e893
AP_HAL: make receive_time_constraint_us non-const
...
needed to use available()
2018-05-21 14:53:18 +10:00
Francisco Ferreira
695d92ddbf
AP_HAL: remove Qualcomm board support
2018-05-17 09:57:20 +10:00
Andrew Tridgell
f7a239d833
AP_HAL: added function for last receive timestamp on uarts
...
this is used for mavlink vision time estimates
2018-05-16 18:49:22 +10:00
mirkix
76802740cb
AP_HAL: fix PocketPilot HMC5843 I2C bus number
2018-05-12 07:16:50 +10:00
Peter Barker
939aec090e
AP_HAL: allow F4Light to call delay callback
2018-05-12 07:16:06 +10:00
Michael du Breuil
62f153c1b7
AP_HAL: Remove set_overrides() method
2018-05-11 12:13:39 +01:00
mirkix
dfd2fb1841
AP_HAL: move BUZZER_PIN into AP_HAL
2018-05-10 17:48:25 +01:00
mirkix
8c36635a8c
AP_HAL: LED GPIOs for final PocketPilot design
2018-05-09 16:16:42 -07:00
Peter Barker
0ad53e53eb
AP_HAL: move delay callback handling to base HAL Scheduler class
...
This allows us to move a lot of delay handling from vehicle classes into
HAL Scheduler.
The most notable improvement is that it moves the detection of recursion
into the Scheduler, out of each separate vehicle.
2018-05-09 16:15:38 +10:00
anbello
93f551e56e
define for AirbotF4 board (ChibiOS HAL)
...
modified: libraries/AP_HAL/AP_HAL_Boards.h
new file: libraries/AP_HAL_ChibiOS/hwdef/airbotf4/hwdef.dat
2018-05-08 07:33:19 +10:00
Andrew Tridgell
097632eeb3
AP_HAL: try to prevent use of double maths functions
...
this will help reduce the number of misuses of double precision maths
functions
2018-05-07 11:43:23 +10:00
Andrew Tridgell
84a4f9dc96
AP_HAL: added boost_end() method to Scheduler API
...
this allows for a better method of controlling main thread priority
2018-05-05 07:45:53 +10:00
Lucas De Marchi
b54b95de12
AP_HAL: minlure: search for specific I2C controller
...
The number can change from one kernel version to another and even from
one boot to another. Find the I2C controller on sysfs and stick to that,
like it's done for PCA9685.
2018-05-04 11:47:04 -07:00
Lucas De Marchi
2000e17646
AP_HAL: move get_device() method from AP_HAL_Linux
...
This way it's possible to use the method in platform-independent code
without a need to up cast.
2018-05-04 11:47:04 -07:00
Lucas De Marchi
4f2498947b
AP_HAL_Linux: remove redundant ifdef
...
CONFIG_HAL_BOARD_SUBTYPE should be set in the boards header.
2018-05-04 11:42:55 -07:00
mirkix
ee86418587
AP_HAL: change PocketPilot to final baro sensor
2018-05-04 08:00:49 +10:00
night-ghost
9f1e45509a
support for Matek F405-CTR board, causes minor changes in I2C descriptor block
2018-04-26 07:51:06 +10:00
Andrew Tridgell
33a26ac0a8
AP_HAL: enable DEVO telemetry on F4Light
2018-04-24 10:44:28 +10:00
Alexander Malishev
ca33ff04d9
ChibiOS: add support for omnibusf4pro board
2018-04-14 09:25:15 +10:00
Andrew Tridgell
943e433be6
AP_HAL: added device name for bmp280 for ChibiOS
2018-04-12 11:50:44 +10:00
night-ghost
677fc1875b
HAL_F4Light: some modes disabled by default
2018-04-11 10:13:08 +10:00
Andrew Tridgell
a7711ab9f7
AP_HAL: don't require GPIO defines for RCOU serial on ChibiOS
2018-04-09 15:32:04 +10:00
Andrew Tridgell
0bb2c4564d
AP_HAL: make hal aware of oneshot125
...
this separates oneshot and oneshot125 at the HAL layer, allowing the
HAL to properly handle the high timing resolution of oneshot125
(needed to use 125ns time steps, to get the full 1000 throttle steps)
2018-04-07 09:10:29 +10:00
Andrew Tridgell
dacbef2120
AP_HAL: added get_esc_scaling() API for rcout
2018-04-07 09:10:29 +10:00
Andrew Tridgell
85ae6f60a8
AP_HAL: added UART locking interface
...
used to gain exclusive access to a UART. This is needed for the BLHeli
MSP protocol to prevent protocol corruption due to console writes
2018-04-07 09:10:29 +10:00
Andrew Tridgell
69c623270c
AP_HAL: added telem request to RCOutput
2018-04-07 09:10:29 +10:00
Andrew Tridgell
74bf83c39f
AP_HAL: added check for RCOUT serial support
2018-04-07 09:10:29 +10:00
Andrew Tridgell
7d3cce98d0
AP_HAL: allow override of MS5611 name
...
for fmuv4-beta
2018-04-07 09:10:29 +10:00
Andrew Tridgell
d2075b4b67
AP_HAL: added irq save/restore API to hal.scheduler
...
these are used by RPM driver
2018-04-07 09:10:29 +10:00