Peter Barker
a55c40949b
GCS_MAVLink: remove pointless protocol parameter to setup_uart
2019-06-25 09:47:08 +10:00
Peter Barker
ca449cd979
GCS_MAVLink: stop pointlessly passing serial manager around
2019-06-25 09:47:08 +10:00
Peter Barker
45fab82345
GCS_MAVLink: eliminate redundant static pointer to serialmanager
2019-06-25 09:47:08 +10:00
Randy Mackay
0b62641a46
AC_Avoidance: fix Dijkstra's iteration through polygon fence points
2019-06-25 00:32:18 +08:00
Peter Barker
afd63c05ec
AP_Tuning: ignore tuning selector switch unless valid RC input
2019-06-25 00:31:54 +08:00
Peter Barker
288b13868b
AP_Tuning: debounce RC input
2019-06-25 00:31:54 +08:00
Andrew Tridgell
b6dbb8f464
GCS_MAVLink: always show AHRS healthy with EKF type 10
...
this fixes an issue noticed by Marco with xplane
2019-06-25 00:28:45 +08:00
Andrew Tridgell
5ac2aad2f8
AP_Mission: fixed valgrind error on writing mission items
2019-06-24 18:19:14 +08:00
Andrew Tridgell
0ca71ba725
AP_HAL: added get_last_armed_change() Util function
2019-06-21 11:40:53 +10:00
Andrew Tridgell
8fc8bc4d84
AP_Arming: notify logging system of an arming failure
2019-06-21 11:40:53 +10:00
Andrew Tridgell
dd3eec2a38
AP_Logger: persist logging for 15s after disarm or arming failure
...
this will provide useful information in logs on disarms in flight or
reasons for arming failure
2019-06-21 11:40:53 +10:00
Randy Mackay
df6c666740
AP_Common: add AP_ExpandingGeneric to reduce code size
2019-06-20 15:09:23 +09:00
Randy Mackay
4ef3005d2c
AP_Common: add AP_ExpandingArray delete
2019-06-20 15:09:23 +09:00
Randy Mackay
578023483c
AC_Avoidance: Dijkstra's expanding arrays use 32 elements per chunk
2019-06-20 15:09:23 +09:00
Randy Mackay
2cb89d9a02
AP_Common: expanding array uses realloc
...
also make chunk_size const and recommend factor of 2
also reduce top level array's initial size to 32 elements
2019-06-20 15:09:23 +09:00
Randy Mackay
da645c32ff
AC_Avoidance: Dijkstra's specifies expanding array chunk sizes
...
also add check that number of polygon points is less than 255
2019-06-20 15:09:23 +09:00
Randy Mackay
073ce8c3db
AP_ExpandingArray: add class description and remove default constructor
...
also made the following changes:
replaced delete with free
renamed chunk_ptr typedef to chunk_ptr_t
2019-06-20 15:09:23 +09:00
Randy Mackay
48a7f468bf
AC_Avoidance: AP_OADijkstra and OAVisGraph use AP_ExpandingArray
2019-06-20 15:09:23 +09:00
Randy Mackay
528e7c60b0
AP_Common: add AP_ExpandingArray class
2019-06-20 15:09:23 +09:00
Peter Barker
1ff3cd442d
AP_Mission: fix example by instantiating a GCS object
2019-06-20 13:40:28 +10:00
Peter Barker
c11da6a85d
GCS_MAVLink: routing example: use GCS_Dummy in place of custom GCS
2019-06-20 11:41:19 +10:00
Jaaaky
061b4b7e70
AP_Airspeed: convert to unix style end-of-line
2019-06-19 16:39:09 +09:00
Andrew Tridgell
767968026a
AP_AdvancedFailsafe: added docs for AFS output pins
2019-06-18 17:20:55 +01:00
Michael du Breuil
75c62154b5
AP_HAL_SITL: Add missing override declarations
2019-06-18 00:06:32 -07:00
Michael du Breuil
a34ac14ec5
AP_HAL_ChibiOS: Make BOARD_FLASH_SIZE available at configure time
2019-06-18 00:06:32 -07:00
Michael du Breuil
0a7cf77de4
AP_AHRS: Update function descriptions in header
2019-06-18 00:06:32 -07:00
Michael du Breuil
0ed3c547fd
AP_Scripting: Disable by default, fix a nullable type, update README
2019-06-18 00:06:32 -07:00
Peter Barker
ccbf3234f7
AP_HAL_SITL: return RC protocol being decoded
2019-06-18 11:35:38 +10:00
Peter Barker
a9c4f1d0d5
AP_HAL_Linux: return RC protocol being decoded
2019-06-18 11:35:38 +10:00
Peter Barker
1f4de871da
AP_HAL_ChibiOS: return RC protocol being decoded
2019-06-18 11:35:38 +10:00
Peter Barker
92111eea61
AP_HAL: require HALs implement rcin.protocol() to return RC protocol
2019-06-18 11:35:38 +10:00
Peter Barker
7bca6d5ec0
AP_Logger: log RC protocol each time a log is opened
2019-06-18 11:35:38 +10:00
Peter Barker
0963957b31
GCS_MAVLink: correct GCS_Dummy firmware version
2019-06-18 10:54:01 +10:00
Peter Barker
c39a622653
GCS_MAVLink: take sw_version from AP_FWVersion struct
2019-06-18 10:54:01 +10:00
Peter Barker
b48c729bb1
AP_Common: add os_sw_version to AP_FWVersion
2019-06-18 10:54:01 +10:00
Peter Barker
8f8851271a
RC_Channel: add mode-changing options to Plane RC channel options
2019-06-18 10:48:47 +10:00
Peter Barker
a2c4bfea0c
GCS_MAVLink: use send_to_active_channels for parameters
2019-06-18 10:27:56 +10:00
vierfuffzig
7780e8ed00
AP_HAL_ChibiOS: add support for AIO and OSD board types
...
this allows init on board variant without onboard baro
2019-06-18 10:10:22 +10:00
Michael du Breuil
6e0cceff0d
AP_Common: Remove extra comparison from longitude_scale()
2019-06-18 10:09:09 +10:00
Peter Barker
4e5842a150
AP_Common: add initialised() method to Location
...
Sometimes code paths are crossed when they shouldn't be. This method
can help in the short term if a codepath is calling methods on a
Location when it is not initialised, but generally a vehicle should be
calling position_ok() and other methods rather than this one.
2019-06-18 09:07:56 +09:00
Michael du Breuil
4aa33bec49
AP_AHRS: Remove AP_GPS.h from AP_AHRS.h
2019-06-18 10:02:05 +10:00
Michael du Breuil
197804412a
APM_Control: Fix AP_GPS include
2019-06-18 10:02:05 +10:00
Michael du Breuil
a09ead5819
AP_ADSB: Fix AP_GPS include
2019-06-18 10:02:05 +10:00
Michael du Breuil
3194b073ca
AP_AdvancedFailsafe: Use AP_GPS singleton
2019-06-18 10:02:05 +10:00
Michael du Breuil
157a3b1e34
AP_Airspeed: Fix AP_GPS.h include and use the singleton
2019-06-18 10:02:05 +10:00
Michael du Breuil
c70107cabb
AP_Arming: Fix AP_GPS.h include
2019-06-18 10:02:05 +10:00
Michael du Breuil
889d9b7348
AP_Frsky: Fix AP_GPS.h include
2019-06-18 10:02:05 +10:00
Michael du Breuil
f6f432a785
AP_Landing: Fix AP_GPS.h include, use a ref to the singleton
2019-06-18 10:02:05 +10:00
Michael du Breuil
f8750a6d18
AP_Logger: Fix AP_GPS.h include
2019-06-18 10:02:05 +10:00
Michael du Breuil
459e6704b9
AP_Module: Fix AP_GPS.h include
2019-06-18 10:02:05 +10:00
Michael du Breuil
fbd19f30e7
AP_Mount: Reduce header includes
2019-06-18 10:02:05 +10:00
Michael du Breuil
892b687c09
AP_NavEKF2: Fix AP_GPS.h include
2019-06-18 10:02:05 +10:00
Michael du Breuil
be74b631fe
AP_NavEKF3: Fix AP_GPS.h include
2019-06-18 10:02:05 +10:00
Michael du Breuil
2ab8a2318e
AP_OSD: Fix AP_GPS.h include
2019-06-18 10:02:05 +10:00
Michael du Breuil
cbcd959290
AP_Terrain: Fix AP_GPS.h include
2019-06-18 10:02:05 +10:00
Michael du Breuil
be7afe346b
GCS_MAVLink: Fix AP_GPS include
2019-06-18 10:02:05 +10:00
Michael du Breuil
6317355390
RC_Channel: Fix AP_GPS include
2019-06-18 10:02:05 +10:00
Michael du Breuil
23439de39a
AP_Logger: Don't include AP_BattMonitor which we don't need
2019-06-18 10:02:05 +10:00
Michael du Breuil
ba4c589ff2
AP_OSD: Fix depending upon AP_Logger for AP_BattMonitor header
2019-06-18 10:02:05 +10:00
Michael du Breuil
f6b8bf49a1
AP_Motors: Simplify the example includes
2019-06-18 10:02:05 +10:00
Michael du Breuil
8c00102259
GCS_MAVLink: Reduce scoping on AP_BattMonitor include
2019-06-18 10:02:05 +10:00
Michael du Breuil
eed710db5f
AP_GPS: Fix a lot of unneded example includes
2019-06-18 10:02:05 +10:00
Michael du Breuil
9fc954b030
AP_Compass: Reduce scope of BattMonitor include
2019-06-18 10:02:05 +10:00
Michael du Breuil
03a4dda810
AP_Mount: Remove unneeded dependency on AP_Airspeed, and bad example
2019-06-18 10:02:05 +10:00
Peter Barker
b902316139
AP_HAL: remove buggy write implementation
2019-06-17 17:20:57 +10:00
Pierre Kancir
209b0300a5
AP_Rangefinder: fix compilation for Bebop
2019-06-14 18:56:05 -07:00
Randy Mackay
bba81b2794
AC_Avoidance: Dijkstra's exits early if polygon fence disabled
2019-06-14 08:06:17 +09:00
Peter Barker
da5d5c9203
AP_Math: add tests for Vector2
2019-06-13 19:36:49 +10:00
Jaaaky
fb311208ab
AP_AHRS: Fix DCM gndVelADS on groundspeed_vector() with airspeed_use
2019-06-13 16:31:12 +10:00
Randy Mackay
fb284ff26a
AP_ServoRelayEvents: minor formatting fix
2019-06-13 09:51:21 +09:00
Tatsuya Yamaguchi
012fcae388
AP_ServoRelayEvents: allow DO_SET_SERVO commands while rc pass-thru
2019-06-13 09:51:21 +09:00
Tatsuya Yamaguchi
f9547fa28e
SRV_Channel: allow DO_SET_SERVO commands while rc pass-thru
2019-06-13 09:51:21 +09:00
Rishabh
ce48b82500
AC_WPNav: remove brake
2019-06-13 09:02:46 +09:00
Peter Barker
c59dde78c6
AP_HAL_SITL: dump stack trace as part of panic()
2019-06-13 09:25:42 +10:00
Peter Barker
dd68b14f46
AP_HAL_SITL: move dump_strack_trace into HAL
2019-06-13 09:25:42 +10:00
Peter Barker
c3a99c8eb0
AP_HAL: move dump_strack_trace into HAL
...
Use a weak definition to allow subclasses to override
2019-06-13 09:25:42 +10:00
Randy Mackay
cceab9c88f
AC_Avoidance: fix BendyRuler when outside polygon fence
2019-06-12 14:54:33 +09:00
Peter Barker
cc7044b360
AP_Scheduler: include internal error count in PM log message
2019-06-12 10:05:59 +10:00
Peter Barker
733b7b7f1a
AP_Logger: include internal error count in log structure
2019-06-12 10:05:59 +10:00
Peter Barker
5f877294c9
AP_Logger: re-add lost validate_structure loop
...
Lost with bad rebase
2019-06-12 10:05:59 +10:00
Peter Barker
cd0265644d
AP_Logger: disable float-mult-zero sanity check for the time being
2019-06-12 10:05:59 +10:00
Peter Barker
ae85994c59
GCS_MAVLink: include internal error count as errors4 in SYS_STATUS
2019-06-12 10:05:59 +10:00
Peter Barker
256b6703f1
AP_InternalError: keep count of number of errors having occured
2019-06-12 10:05:59 +10:00
Andrew Tridgell
99316a191c
AP_AHRS: added check_lane_switch()
2019-06-12 09:52:20 +10:00
Andrew Tridgell
60831c2878
AP_NavEKF3: added checkLaneSwitch()
...
this allows the vehicle code to ask the EKF to change lanes if it is
about to do an EKF failsafe
2019-06-12 09:52:20 +10:00
Andrew Tridgell
3073c4da7a
AP_NavEKF2: added checkLaneSwitch()
...
this allows the vehicle code to ask the EKF to change lanes if it is
about to do an EKF failsafe
2019-06-12 09:52:20 +10:00
Peter Barker
f385a4a329
GCS_Common: fix compiler warnings on missing parentheses
2019-06-11 21:50:53 +10:00
Randy Mackay
6ed09d83f3
GCS_MAVLink: send_home_position uses const Location reference
2019-06-11 13:13:22 +09:00
Randy Mackay
0a86bbdc9a
AC_Avoidance: add license to cpp file
2019-06-11 13:13:22 +09:00
Randy Mackay
70e9881880
AR_WPNav: integrate OAPathPlanner
2019-06-11 13:13:22 +09:00
Randy Mackay
af80070ed9
AP_OAPathPlanner: path planning around obstacles
...
implements both bendy ruler and dijkstra's algorithms
includes many changes after peer review including:
removed unused airspeed and turn-rate arguments
renamed constants to start with OA_BENDYRULER_
removed fence_ptr check from update function that could cause bendy ruler to fail when fences were disabled
AC_Fence's fence-margin is not used and instead we always use a hard-coded 2m limit
vehicle's heading is used instead of ground-course when speed is below 0.2m/s
static assert added to ensure OA_BENDYRULER_BERAING_INC constant is defined correctly
replace BAD_MARGIN/GOOD_MARGIN with FLT_MAX/-FLT_MAX
use calc_margin_from_xxx function's return values
calc-margin-from-proximity-sensors fails if copy-locations fails
remove debug
remove unused singletons
and other changes including:
integrate fence rename to get_boundary_points
adapt to fence return point and duplicate final point from not being returned
create bendyrule and dijkstra objects on init
add pre-arm-check to ensure they've been created successfully
Dijkstra's detects polygon fence changes
minor fix to Dijkstra's return path
allow update_visgraph to accept 0,0 as extra point
and these fixes from peer reviews:
remove unused methods
add note about dangers of operator[]
reduce memory consuption of ShortPathNode
remove unused methods including print_all_nodes and print_shortest_path
replace OA_DIJKSTRA_POLYGON_VISGRAPH_INFINITY_CM with FLT_MAX
update method gets check that ekf origin has been set
fix indexing bug in inner fence creation
fix whitespace error
find-node-from-id uses switch statement instead of 3 IF statements
update_visgraph comments added to clarify usage of extra_position argument
find-closest-node-idx always uses node_index instead of int16_t
static assert that OA_DIJKSTRA_POLYGON_FENCE_PTS < 255
some looping style changes
AP_OABendyRuler: fix to ground course calculation
AP_OAPathPlanner: pre_arm_check writes to caller's buffer
remove unnecessary hal and stdio.h includes
rename fence_ptr local variable to fence
add sanity check to OADijkstra's set_fence_margin
add sanity check to OABendyRuler's set_config
BendyRuler's test_bearing local constants changed to be float constants
BendyRuler's ahrs_home made local constant
BendyRuler's proximity margin calcs lose margin_found local variable (use FLT_MAX instead)
BendyRuler's calc-margin-from-circular-fence performance improvement by removing one sqrt
AP_OABendyRuler: fix probe directions to be 5deg offsets from dir to destination
AP_OADijkstra: fixes after peer review
remove unnecesary initialisations
replace safe_sqrt(sq()) with length()
remove unnecessary block
comment fixes
AP_OAPathPlanner: add logging of final an intermediate location
2019-06-11 13:13:22 +09:00
Randy Mackay
c7b1ad3443
AP_Logger: add Write_OA
2019-06-11 13:13:22 +09:00
Randy Mackay
beb9ecbdcb
AC_Fence: add get_boundary_update_ms
...
this allows callers to detect changes in the underlying polygon fence
2019-06-11 13:13:22 +09:00
Randy Mackay
0f6e61bc33
AC_Fence: add is_polygon_valid accessor
2019-06-11 13:13:22 +09:00
Randy Mackay
9c3812e384
AP_Proximity: move copy_locations to backend
...
also remove unused get_locations
also fix comment for copy_locations method
2019-06-11 13:13:22 +09:00
Tom Pittenger
b792fe4b26
AP_Proximity: add Location* object and accessors
2019-06-11 13:13:22 +09:00
Randy Mackay
c2bcc0d5f0
AP_Math: define Vector2f::perpendicular
2019-06-11 13:13:22 +09:00
Randy Mackay
071e340827
AP_Math: Polygon_closest_distance_line returns neg numbers
...
value is negative distance from intersection to p2
2019-06-11 13:13:22 +09:00
Andrew Tridgell
6eb816fd3b
AP_Math: add Polygon_closest_distance_line
...
Also add optimisations
2019-06-11 13:13:22 +09:00
Andrew Tridgell
a5fd7ac5ca
AP_Math: add vector2f::closest_distance_between_line_and_point_squared
...
also add vector2f::closest_distance_between_line_and_point and vector2f::closest_distance_between_lines_squared
2019-06-11 13:13:22 +09:00
Andrew Tridgell
2457bf71d4
AP_Math: add simplified vector2f::closest_point
...
this simpler version assumes the line segment originates at the origin
2019-06-11 13:13:22 +09:00
Andrew Tridgell
c8e49259a0
AP_Math: add vector2f::closest_distance_between_radian_and_point_squared
2019-06-11 13:13:22 +09:00
Andrew Tridgell
dbf337e1b3
AP_Math: move closest_point to cpp
2019-06-11 13:13:22 +09:00
Andrew Tridgell
bfc28dfde9
AP_Math: move normalize, reflect, project and perpendicular to cpp
2019-06-11 13:13:22 +09:00
Andrew Tridgell
01e541b7d1
AP_Math: minor formatting changes to length method
2019-06-11 13:13:22 +09:00
Andrew Tridgell
4c4de1f021
AP_Math: vector2f::length_squared always returns float
2019-06-11 13:13:22 +09:00
Andrew Tridgell
46617e6c72
AP_Math: remove unused include from Vector2
2019-06-11 13:13:22 +09:00
Andrew Tridgell
69781cda42
AP_Math: add Vector2::angle
2019-06-11 13:13:22 +09:00
Rajat Singhal
bc22aeb4da
GCS_Mavlink: Correct format specifier in UART panic message
2019-06-11 13:36:03 +10:00
Peter Barker
68d7e0c22f
AP_RangeFinder: correct macro being used for parameter definition
2019-06-11 12:47:56 +10:00
Peter Barker
8cd5e3103f
AP_RangeFinder: remove use of removed AP_PARAM_FLAG_IGNORE_ENABLE
2019-06-11 11:38:10 +09:00
Michael du Breuil
40753ab14e
AP_Param: Remove non functional AP_Param ignore flags
2019-06-11 10:28:45 +10:00
Michael du Breuil
cc7d13e9ef
AP_BattMonitor: Remove param ignore flags
2019-06-11 10:28:45 +10:00
heitiane
931367a7ea
AP_HAL: fix RCOutput, RCOutput2 and RCInputToRCOutput examples to prevent the failure of reading and writing channels.
2019-06-11 10:27:44 +10:00
Peter Barker
a025794bae
GCS_MAVLink: correct is_streaming check and update of is-streaming mask
2019-06-11 09:26:10 +10:00
Andrew Tridgell
51e187342b
HAL_ChibiOS: move the power control changes to be only CubeBlack
...
This aims to fix #11455 . I have been unable to reproduce the issue,
which leaves me thinking it is either a bootloader difference or a hw
difference between pixhawk1 clones and real pixhawk1 boards
2019-06-09 16:56:14 +10:00
Andrew Tridgell
df4fc0fff0
AP_NavEKF2: default EK2_MAG_EF_LIM to 50
...
this was supposed to be part of the original PR (agreed with Paul to
enable by default)
2019-06-08 20:24:58 +10:00
Siddharth Purohit
a926effee5
hwdef: iomcu set pin mode to input for autodetecting heater control level
2019-06-08 14:31:01 +10:00
Siddharth Purohit
f23746053d
AP_IOMCU_FW: autodetect active high/low on heater control pin
2019-06-08 14:31:01 +10:00
Peter Hall
aa32a0d143
AP_Windvane: fix NMEA vehicle to earth frame
2019-06-08 09:48:03 +09:00
Randy Mackay
607f996232
AC_Avoid: restructure logic of adjust_velocity_circle_fence
2019-06-08 09:35:36 +09:00
Randy Mackay
a96c146758
AR_AttitudeControl: set-throttle-out-stop considered same as running speed controller
...
update the speed-last-ms time when set-throttle-out-stop runs or else the desired throttle will not be acceleration limited when the desired speed is next increased above zero
2019-06-08 09:35:36 +09:00
Randy Mackay
e846840a52
AC_Avoid: fix stopping at circular fence
2019-06-08 09:35:36 +09:00
Peter Barker
e061df0f6d
AP_HAL_SITL: attempt to dump stack trace as part of segv handler
2019-06-07 22:03:41 +10:00
Andrew Tridgell
02403d9b93
HAL_SITL: added support for exit on panic()
...
used by autotest server
2019-06-07 20:33:13 +10:00
Peter Barker
35d4555be0
AC_Avoid: improve documentation of AVOID_ENABLE options
2019-06-07 17:37:00 +09:00
Lucas De Marchi
e66de36016
HAL_ChibiOS: fix I2C transaction without stop condition
...
Start using i2cSoftStop() instead of i2cStop() so the peripheral
continues to be enabled and with non-gated clock. This allows time for
the I2C peripheral to continue the ack or stop.
2019-06-06 09:27:47 -07:00
Andy Piper
31ea3466af
AP_InertialSensor: Post-filter logging takes precedence over sensor-rate logging.
2019-06-06 17:09:17 +10:00
Andy Piper
52e4676564
Filter: Allow all filter frequencies to be 16bit.
2019-06-06 17:09:17 +10:00
Andy Piper
36878e9b3c
AP_InertialSensor: Allow all filter frequencies to be 16bit.
2019-06-06 17:09:17 +10:00
Andy Piper
fff81a2163
AP_InertialSensor: Make sure the LPF output is used by the notch input.
2019-06-06 17:09:17 +10:00
Andy Piper
1a8475cf9f
Filter: Decouple notch filter configuration from the filter itself.
...
Allow multiple notch filters to be instantiated using the same configuration.
2019-06-06 17:09:17 +10:00
Andy Piper
18d403c3ac
AP_InertialSensor: Rework notch filter allocation and sampling
...
https://github.com/ArduPilot/ardupilot/issues/11346
Allocate a notch filter per-IMU.
Update the notch filters in the backend at the sensor sample rate.
Allow raw logging of post-filtered gyro and accel values.
2019-06-06 17:09:17 +10:00
Andrew Tridgell
045bdf3478
AP_InternalError: removed unused internal error
2019-06-06 16:35:22 +10:00
Andrew Tridgell
91f80613dd
AP_Logger: removed internal error for logging without sem
2019-06-06 16:35:22 +10:00
Peter Barker
dce472745e
AP_NavEKF3: take EAS2TAS from AHRS rather than airspeed
2019-06-06 12:44:36 +10:00
Peter Barker
11f31c2851
AP_NavEKF2: take EAS2TAS from AHRS rather than airspeed
2019-06-06 12:44:36 +10:00
Peter Barker
697b8f6b53
AP_AHRS: take EAS2TAS directly from Baro (rather than via airspeed)
2019-06-06 12:44:36 +10:00
Peter Barker
5cfba85095
AP_AirSpeed: take EAS2TAS directory from baro; use for all backends
...
Plane was only setting EAS2TAS in the primary frontend; calibration
expected it to be set on each instance.
2019-06-06 12:44:36 +10:00
Peter Barker
470e88f8b3
AP_Button: use send_to_active_channels()
2019-06-06 12:41:48 +10:00
Peter Barker
264a757095
GCS_MAVLink: add send_to_active_channels method
2019-06-06 12:41:48 +10:00
Peter Barker
4d46c801f2
GCS_MAVLink: panic in SITL if we fail to write to uart
2019-06-06 12:41:48 +10:00
Andrew Tridgell
73bc277470
HAL_ChibiOS: fixed KakuteF7 build
...
low on flash
2019-06-06 12:19:13 +10:00
Andrew Tridgell
2acaada884
HAL_ChibiOS: fixed OMNIBUSF7V2 build
...
ran out of flash for plane
2019-06-06 12:19:13 +10:00
Andrew Tridgell
bfdf857b34
HAL_ChibiOS: fixed airbotf4 build
2019-06-06 12:19:13 +10:00
Peter Barker
f2163fbc24
AC_WPNav: use singleton for getting AC_Avoid instance
2019-06-06 11:47:22 +10:00
Andrew Tridgell
614a059819
HAL_ChibiOS: convert more boards to using new sensor config system
2019-06-05 18:54:40 +10:00
Andrew Tridgell
4a8c307720
AP_UAVCAN: fixed build error of F4 boards with CAN
2019-06-05 18:54:40 +10:00
Peter Barker
4c88a1e9de
AP_RangeFinder: remove dangling update_instance declaration
2019-06-04 19:36:57 +09:00
Peter Barker
503aeba7b7
AP_RPM: remove dangling update_instance declaration
2019-06-04 19:36:57 +09:00
Peter Barker
d617904726
AP_Proximity: remove dangling update_instance declaration
2019-06-04 19:36:57 +09:00
Tatsuya Yamaguchi
18a43601cd
RangeFinder: Add up to 10 RangeFinder logs
2019-06-04 19:11:11 +10:00
Peter Barker
be9df7f600
AP_Logger: add a README.md to help locating units/mults/fieldtypes
2019-06-04 19:00:11 +10:00
Peter Barker
b644df14d0
AP_Logger: move documentation for fieldtypes, units and mults to top
2019-06-04 19:00:11 +10:00
1iggy2
7323a5da9d
AP_Motors: Added Octo I frame
2019-06-04 09:49:44 +09:00
ChristopherOlson
fc84995fb9
AP_Motors:Heli - remove H_LAND_COL_MIN and replace with H_COL_MID
2019-06-04 09:48:03 +09:00
Peter Barker
fb3f761fc7
AP_UAVCAN: fix redefinition of UAVCAN_NODE_POOL_BLOCK_SIZE warning
2019-06-04 10:25:15 +10:00
Peter Barker
cbf6d44277
AP_RCProtocol: fix missing-declaration warning in example
2019-06-04 10:25:15 +10:00
Peter Barker
73c81519da
AP_GPS: fix missing-declaration warning in example
2019-06-04 10:25:15 +10:00
Peter Barker
e9160cd9d5
AC_Avoid: correct iteration through edges
2019-06-04 09:06:07 +09:00
Peter Barker
cd6e5b48a1
AC_Avoid: move check for zero-desired-velocity into adjust_velocity_polygon
...
This is the method which divides by the length of this vector; the
check belongs in here.
2019-06-04 09:06:07 +09:00
Vincent
3177d24429
AP_HAL: Make linux hardware define more readable
2019-06-04 10:00:09 +10:00
Peter Barker
bb14ec1a2c
AP_Arming: make proximity sensor checks common
2019-06-04 08:45:34 +09:00
Peter Barker
99c56c1770
GCS_MAVLink: fix MAV.txp log field
...
This was being promoted to an unsigned.
2019-06-04 09:05:37 +10:00
Andrew Tridgell
e9ed3540f1
AP_NavEKF2: constrain field by table after fusion
...
this should make for faster convergence
2019-06-03 12:21:29 +10:00
Andrew Tridgell
3835d2613e
AP_NavEKF2: added EK2_MAG_EF_LIM parameter
...
this sets a limit on the difference between the earth field from the
WMM tables and the learned earth field inside the EKF. Setting it to
zero disables the feature. A positive value sets the limit in mGauss.
2019-06-03 12:21:29 +10:00
Andrew Tridgell
7206258587
AP_Compass: use new get_earth_field_ga() API
2019-06-03 12:21:29 +10:00
Andrew Tridgell
be62bf32cb
AP_Declination: added get_earth_field_ga() interface
...
this gives a more convenient API for getting the earth field as a
vector
2019-06-03 12:21:29 +10:00
Peter Hall
49003868fe
AP_Windvane: add NMEA wind sensor type
2019-06-03 10:48:19 +09:00
Peter Hall
fe38413ddc
AP_SerialManger: add windvane serial type
2019-06-03 10:48:19 +09:00
Peter Hall
ea4ecebfc4
AP_Math: add speed unit converstion defs
2019-06-03 10:48:19 +09:00
ChristopherOlson
b6bfc8947f
AP_Motors:Heli Governor - change rotor_rpm argument to a float
2019-06-03 07:53:01 +09:00
bnsgeyer
f1a32d7872
AP_Motors: Tradheli- modified thrcrv and gov parameter group names
2019-06-03 07:53:01 +09:00
ChristopherOlson
b1046c7b80
AP_Motors:Heli_RSC Governor - add method of droop compensation
...
- improve handling of outliers from speed sensor
- change governor_tc variable to governor_thrcurve
- remove equals zero from variable declarations
2019-06-03 07:53:01 +09:00
bnsgeyer
4120e29614
AP_Motors: Tradheli-complete conversion of throttle curve params to percent
...
add conversion for throttle curve params for upgrade
2019-06-03 07:53:01 +09:00
bnsgeyer
3629541a20
AP_Motors: Tradheli - implement enable params for throttle curve and governor
2019-06-03 07:53:01 +09:00
bnsgeyer
51d4029f03
AP_Motors: Tradheli - maintain consistent variable types as used in calcs
...
add override to declaration of new functions
2019-06-03 07:53:01 +09:00
ChristopherOlson
cca58e393a
AP_Motors:Heli_RSC - add support for rotor speed governor with droop speed control
2019-06-03 07:53:01 +09:00
Peter Barker
062ee71135
AC_Fence: simplify fence loading
...
There's only one caller to this, who didn't force loading - so remove
the unused parameter.
Also remove the _boundary_loaded boolean; it was only set to true in one
place - just before the sole caller called the function!
2019-05-30 16:03:58 +09:00
Andrew Tridgell
ff603a1f0b
HAL_ChibiOS: convert mini-pix
2019-05-30 15:39:57 +10:00
Andrew Tridgell
4548aa162b
HAL_ChibiOS: convert mindpx-v2
2019-05-30 15:39:57 +10:00
Andrew Tridgell
91aa49ba6f
HAL_ChibiOS: convert matek boards
2019-05-30 15:39:57 +10:00
Andrew Tridgell
fca03bef8d
HAL_ChibiOS: convert F4BY
2019-05-30 15:39:57 +10:00
Andrew Tridgell
8605060dfc
HAL_ChibiOS: convert F35Lightning
2019-05-30 15:39:57 +10:00
Andrew Tridgell
288d5d6fe6
HAL_ChibiOS: convert DrotekP3Pro
2019-05-30 15:39:57 +10:00
Andrew Tridgell
d90b05f685
HAL_ChibiOS: convert all fmuv5 boards to sensor config system
2019-05-30 15:39:57 +10:00
Andrew Tridgell
03bb94599b
HAL_ChibiOS: support I2C sensor probes by bus mask
2019-05-30 15:39:57 +10:00
Andrew Tridgell
fc1ec8a465
HAL_ChibiOS: convert airbot to new config
2019-05-30 15:39:57 +10:00
Andrew Tridgell
82b171582e
HAL_ChibiOS: added sensor config for cube varients
2019-05-30 15:39:57 +10:00
Andrew Tridgell
c36d76c213
HAL_ChibiOS: convert Pixhawk1 to new sensor config
...
saves 26k of flash, making 1M boards work for longer
2019-05-30 15:39:57 +10:00
Andrew Tridgell
eae852962e
HAL_ChibiOS: fixed case of no IMU, BARO or COMPASS config settings
2019-05-30 15:39:57 +10:00
Andrew Tridgell
068e6ea8d2
HAL_ChibiOS: convert KakuteF4 and KakuteF7 to new sensor config
2019-05-30 15:39:57 +10:00
Andrew Tridgell
1b0bf88c8f
HAL_ChibiOS: convert crazyflie2 to new config
2019-05-30 15:39:57 +10:00
Andrew Tridgell
b47ab5c8a9
HAL_ChibiOS: support I2C sensor config in hwdef.dat
2019-05-30 15:39:57 +10:00
Andrew Tridgell
4c5b651296
AP_HAL: removed board type for mRoControlZeroF7
2019-05-30 15:39:57 +10:00
Andrew Tridgell
38c775e6df
AP_Compass: removed old mRoControlZeroF7 config
2019-05-30 15:39:57 +10:00
Andrew Tridgell
aef343bfd0
AP_InertialSensor: removed old mRoControlZeroF7 config
2019-05-30 15:39:57 +10:00
Andrew Tridgell
ceb9c3b83e
HAL_ChibiOS: convert mRoControlZeroF7 to new sensor config
2019-05-30 15:39:57 +10:00
Andrew Tridgell
039e7366b0
AP_InertialSensor: support new sensor config setup
2019-05-30 15:39:57 +10:00
Andrew Tridgell
481ae22671
AP_Compass: support new sensor config setup
2019-05-30 15:39:57 +10:00
Andrew Tridgell
f7b9368b94
AP_Baro: support new sensor config setup
2019-05-30 15:39:57 +10:00
Andrew Tridgell
5eb488303c
HAL_ChibiOS: convert Pixracer to use new sensor config
2019-05-30 15:39:57 +10:00
Andrew Tridgell
e198d552a8
HAL_ChibiOS: support IMU, COMPASS and BARO lines in hwdef.dat
...
this allows for main sensors to be set in hwdef.dat, making adding new
boards simpler
2019-05-30 15:39:57 +10:00
Andrew Tridgell
532b82b3a3
AP_Compass: use DRIVER_HMC5843 to match driver name
2019-05-30 15:39:57 +10:00
Tom Pittenger
c67a585b68
AP_Proximity: increase angular resoluion to mavlink packet OBSTACLE_DISTANCE
2019-05-29 18:22:53 -07:00
Peter Barker
1c4b5b0d73
AP_Arming: move arm status statustext messages back into vehicles
...
Not all vehicle maintainers like having these emitted as part of normal
operations.
2019-05-30 07:37:30 +09:00
Peter Barker
61a2be1470
AP_Arming: change arm and disarm to account for Copter now using them
2019-05-30 07:37:30 +09:00
Peter Barker
75ae6b59b0
GCS_MAVLink: allow Copter to disallow mavlink disarm
2019-05-30 07:37:30 +09:00
Peter Barker
84b16ea3dd
AP_Arming: move check for ARMING_CHECK_NONE back into relevant vehicles
...
Plane and Rover allow all prearm and arm checks to be bypassed with
ARMING_CHECK_NONE. Not all vehicles allow this, so move this bypass
back into Plane and Rover.
2019-05-30 07:37:30 +09:00
Peter Barker
e340873d88
GCS_MAVLink: canonicalise on success on commanded-to-arm-when-armed
...
This means the mavlink return value indicates the current arm status of
the vehicle rather than success/failure of transitioning to the armed or
disarmed state (where trying to arm when armed is considered a failure).
MAVLink is a lossy communication mechanism. It would not be
unreasonable for a GCS to issue a disarm command multiple times to
increase the chances of the command getting through.
2019-05-30 07:37:30 +09:00
Peter Barker
c38e5ba4fc
RC_Channel: handle AUX_FUNC::ARMDISARM
2019-05-30 07:37:30 +09:00
Peter Barker
b857d2c1af
GCS_MAVLink: handle MAV_CMD_COMPONENT_ARM_DISARM
2019-05-30 07:37:30 +09:00
Peter Barker
d67e68eb03
AP_Logger: move LOG_ARM_DISARM_MSG in
2019-05-30 07:37:30 +09:00
Peter Barker
aff6cb424f
AP_Arming: move Log_Write_Arm_Disarm in, make disarm virtual
2019-05-30 07:37:30 +09:00
Peter Barker
d384827291
AP_Arming: add singleton
2019-05-30 07:37:30 +09:00
Andrew Tridgell
48ac028cd0
AP_OSD: take ahrs and baro semaphores
...
this ensures OSD data is self-consistent within each item
2019-05-30 08:33:12 +10:00
Andrew Tridgell
5023b51679
AP_Baro: added semaphore for safe multi-thread use of APIs
2019-05-30 08:33:12 +10:00
Peter Barker
e4de5a17d1
AP_Math: add pitch-7 to rotation tests
2019-05-29 17:12:32 +10:00
Andrew Tridgell
e2eda63d2c
AP_Math: added new rotation for PITCH_7
2019-05-29 17:12:32 +10:00
Peter Barker
977fe09276
AP_Math: add a more complex polygon for Polygon_outside tests
2019-05-29 15:34:02 +10:00
Peter Barker
d3971c18fa
AP_Math: more tests for closed-vs-open polygons
2019-05-29 15:34:02 +10:00
Peter Barker
d74e6db12e
AP_Math: add more tests for Polygon_outside
2019-05-29 15:34:02 +10:00
Peter Barker
da81c5fe39
AP_Beacon: do not include fence closing/duplicate point in polygon boundary
2019-05-29 15:34:02 +10:00
Peter Barker
de9fa4c730
AC_Avoid: call Polygon_outside directly; avoids losing first point
2019-05-29 15:34:02 +10:00
Peter Barker
4be3a48275
AC_Avoid: adjust for renamed get_polygon_points
2019-05-29 15:34:02 +10:00
Peter Barker
2822c635ec
AC_Fence: correct get_boundary_points to account for closing point
...
Also rename from get_polygon_points
2019-05-29 15:34:02 +10:00
Peter Barker
36fe9a18a0
AP_Math: make Polygon_outside cope with being passed unclosed polygons
2019-05-29 15:34:02 +10:00
Randy Mackay
2061621951
AP_Proximity: default YAW_CORR to 0
...
The default of 22 was good when the Lightware SF40C was our only proximity sensor but not good now that we have numerous options
2019-05-29 11:17:28 +09:00
Randy Mackay
ff3d3d256c
AP_Proximity: RPLidarA2 supports yaw-correction and orientation params
2019-05-29 11:17:28 +09:00
斯东Stone
c0e8a443af
AP_OpticalFlow: Correct CX-OF Data Format Sequence
...
Correct CX-OF (a.k.a. UART Version PMW3901) Data Format Sequence
2019-05-29 10:22:51 +09:00
Randy Mackay
ce44d127c0
AR_WPNav: add is_destination_valid accessor
2019-05-29 09:40:05 +09:00
Peter Barker
ab7ee4fefb
AP_Common: Location.cpp: add sanity checks
2019-05-29 09:04:37 +09:00
Michael Oborne
6031f5b6a9
AP_GPS_UBLOX: add support for TIMEGPS message. used to get gps week
2019-05-29 09:48:17 +10:00
Peter Barker
fc71e1ba53
AP_InternalError: add internal error for out-of-range bitmask ops
2019-05-28 09:43:17 +10:00
Peter Barker
9d4bdbf3d5
AP_Common: add sanity check into bitmask get/set
...
Also return false if we are asked about an out-of-bounds bit
2019-05-28 09:43:17 +10:00
Peter Hall
5839c1ebf6
SITL: Sailboat: write rpm and airspeed for windvane backends
2019-05-28 08:35:58 +09:00
Peter Hall
f26e1dc8e8
AP_WindVane: add modern devices rev p cal
2019-05-28 08:35:58 +09:00
Peter Hall
9dba9867c6
AP_WindVane: mini onion
2019-05-28 08:35:58 +09:00
Peter Barker
dbbf09d018
AP_Proximity: minor performance enhancements
2019-05-28 09:19:48 +10:00
Peter Barker
1c7a8c1509
AP_Beacon: correct parameter documentation to include SITL
2019-05-28 09:16:47 +10:00
Peter Barker
64aafb2af2
AP_Math: add Polygon_outside tests for long template instantiation
2019-05-28 09:08:07 +10:00
Peter Barker
51a0401383
AP_Math: correct Polygon_outside floating point instatiation
...
This routine was entemplatificated from the integer version, which was
designed to be perfect across representable ranges of points. The
floating point version suffered from a rounding problem.
2019-05-28 09:08:07 +10:00
Peter Barker
b35b65eed1
AP_Math: add GTEST suite for Polygon_outside
2019-05-28 09:08:07 +10:00
Peter Barker
1ce2424e49
AP_HAL_Linux: add required override keyword on configure_parity
...
Also remove virtual - doesn't make sense here.
2019-05-27 09:55:18 -07:00
Michael du Breuil
a1fda8bc76
AP_BLHeli: Update to support newer targets and protocols
2019-05-25 09:37:56 +10:00
Lucas De Marchi
4f73881c4b
AP_RangeFinder: TFMiniPlus: enforce minimum version 1.7.6
...
On this version of the firmware the command changed - support the new
command and only that one: it's not expected to have devices with the
older versions.
2019-05-24 01:47:04 -07:00
Lucas De Marchi
b3a8496613
AP_RangeFinder: add support for Benewake TFMini Plus on I2C
...
This was tested with firmware 1.7.0 on the sensor.
2019-05-24 01:47:04 -07:00
Peter Barker
f09efe0908
AP_Math: correct URL for Polygon_outside algorithm
2019-05-24 13:17:43 +10:00
Phillip Kocmoud
734abe3d7d
hwdef: Correct typo for mRo x2.1-777 USB PID
...
This needed to match the firmware directory which contains the compiled binaries hosted at http://firmware.ardupilot.org so that MissionPlanner can automatically download and update firmware.
2019-05-23 11:05:42 +10:00
Rajat Singhal
8097b0ede3
SITL: Gazebo: Fixed comment, typos
2019-05-23 08:23:37 +09:00