Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
63,483 Commits 71 Branches 509 Tags 716 MiB
Commit Graph

3168 Commits

Author SHA1 Message Date
Andrew Tridgell 4eaf5ef247 HAL_ChibiOS: support STM32H723 boards 2024-01-30 12:32:23 +11:00
Andrew Tridgell e772012e01 HAL_ChibiOS: raise SDMMC clock limit on H7 
this allows for faster log download on ethernet
 2024-01-29 06:51:11 +11:00
Andrew Tridgell a2707b48c5 HAL_ChibiOS: enable clock management on G4 
this allows for a different clock tree in the main fw from the
bootloader
 2024-01-25 11:44:02 +11:00
Andrew Tridgell 2d031a4d20 HAL_ChibiOS: switched G4 FDCAN clock to 80MHz 
this requires main CPU clock at 160 MHz instead of 168 MHz
 2024-01-25 11:44:02 +11:00
Andrew Tridgell 1c8048df8f HAL_ChibiOS: fixed CANFD timings 
our CANFD timings were resulting in a lot of busoff errors. Here is an
example of master at 1Mbit/5MBit:

Getting @SYS/can0_stats.txt as -
------- Clock Config -------
CAN_CLK_FREQ:   80MHz
Std Timings: bitrate=1000000 presc=7
sjw=0 bs1=7 bs2=0 sample_point=90.00000%
FD Timings:  bitrate=5000000 presc=1
sjw=0 bs1=5 bs2=0 sample_point=90.00000%
------- CAN Interface Stats -------
tx_requests:    2689
tx_rejected:    0
tx_overflow:    443
tx_success:     7
tx_timedout:    2232
tx_abort:       0
rx_received:    18470
rx_overflow:    0
rx_errors:      0
num_busoff_err: 34439
num_events:     18477
ECR:            F8
fdf_rx:         18467
fdf_tx_req:     2182
fdf_tx:         0

here is an example with the new timings:

------- Clock Config -------
CAN_CLK_FREQ:   80MHz
Std Timings: bitrate=1000000 presc=8
sjw=1 bs1=8 bs2=1 sample_point=90.00000%
FD Timings:  bitrate=8000000 presc=2
sjw=3 bs1=8 bs2=3 sample_point=80.00000%
------- CAN Interface Stats -------
tx_requests:    3023
tx_rejected:    0
tx_overflow:    0
tx_success:     3023
tx_timedout:    0
tx_abort:       0
rx_received:    27865
rx_overflow:    0
rx_errors:      0
num_busoff_err: 0
num_events:     30888
ECR:            0
fdf_rx:         27862
fdf_tx_req:     3016
fdf_tx:         3016

I am testing between a CubeOrange and a Pixhawk6X. I tested 1, 2, 4, 5
and 8 MBit (which are the only valid FD bitrates in our parameters)

Many thanks to Kai from Salient Motion for finding this issue and
providing the corrected timing table
 2024-01-25 11:44:02 +11:00
Hayden Donald a81f2785aa AP_HAL_ChibiOS: Use correct pin config for ADC2 and ADC3 2024-01-24 08:03:24 +11:00
MallikarjunSE 873e2eac7d AP_HAL_ChibiOS: update truenav hwdef 2024-01-24 07:58:09 +11:00
Andrew Tridgell e714f0a7a3 AP_HAL_ChibiOS: fixed name of pitch limit parameters 2024-01-23 15:00:30 +11:00
Andrew Tridgell a6bceccd82 AP_HAL_ChibiOS: convert param files LIM_ROLL_CD -> ROLL_LIMIT_DEG 2024-01-23 15:00:30 +11:00
Andrew Tridgell 862b0ed8d6 AP_HAL_ChibiOS: convert param files for pitch limits 2024-01-23 15:00:30 +11:00
Andrew Tridgell e5199a71d6 AP_HAL_ChibiOS: convert ALT_HOLD_RTL to RTL_ALTITUDE 2024-01-23 15:00:30 +11:00
Andrew Tridgell f935cbaead AP_HAL_ChibiOS: convert ARSPD_FBW_MIN/MAX to AIRSPEED_MIN and AIRSPEED_MAX 2024-01-23 15:00:30 +11:00
Andrew Tridgell 98d40d0e58 AP_HAL_ChibiOS: converted TRIM_ARSPD_CM to AIRSPEED_CRUISE 2024-01-23 15:00:30 +11:00
Andy Piper 6c634ebc00 AP_HAL_ChibiOS: allow dshot beeps to play on all dshot ESC types 2024-01-23 11:58:55 +11:00
Peter Barker 331110639e AP_HAL_ChibiOS: rename COMPASS_TYPEMASK to COMPASS_DISBLMSK 
this is a very confusingly named parameter.  I've seen several instances of people treating this as an enable mask rather than a disable mask
 2024-01-23 11:54:49 +11:00
Andrew Tridgell 140518da3c hwdef: added support for Holybro6X-45686 2024-01-23 11:49:14 +11:00
bugobliterator 9de1b6164b AP_HAL_ChibiOS: add more pins to STM32H757 ADC channel map 2024-01-22 20:35:16 +11:00
bugobliterator b17d864d1a AP_HAL_ChibiOS: fix set_pin and _pin_scalar methods for ADC2 and ADC3 2024-01-22 20:35:16 +11:00
MallikarjunSE f71fc58767 AP_HAL_ChibiOS: Add hwdef for TrueNavPro-G4 2024-01-21 13:10:10 +11:00
MallikarjunSE 6231a5edfd AP_HAL_ChibiOS: add TrueNavIC hwdef 2024-01-21 13:10:10 +11:00
Andrew Tridgell f7c7ee00e9 HAL_ChibiOS: added a delete_next thread field for cleanup 
allows for cleanup of web server threads in bootloader
 2024-01-21 12:30:08 +11:00
Andrew Tridgell 5e7b211b79 HAL_ChibiOS: moved M4 disable into H757 script 
this fixes assert checking in the bootloader and for boards other than
CubeRedPrimary
 2024-01-21 12:30:08 +11:00
Andrew Tridgell b49a7da32a hwdef: disable use of external flash in PPPGW 
we cannot upload new firmware on CAN or network with external flash
 2024-01-21 12:30:08 +11:00
Andrew Tridgell 855a5d28c0 hwdef: use a common PPPGW include 
and fixed missing RTC bindings in web server
 2024-01-21 12:30:08 +11:00
Andrew Tridgell 3a84f35593 HAL_ChibiOS: support building with no GPIOs 2024-01-21 12:30:08 +11:00
Andrew Tridgell f225d797d2 hwdef: use common include for network bootloader 2024-01-21 12:30:08 +11:00
Andrew Tridgell 4e49481d3a hwdef: enable USB for bootloader on Pixhawk6X-PPPGW 2024-01-21 12:30:08 +11:00
Andrew Tridgell 91cc0d7dba HAL_ChibiOS: ensure periph uses same RAM0 address as bootloader 
this fixes passing of addresses for boards that use an ALT_RAM_MAP
 2024-01-21 12:30:08 +11:00
Andrew Tridgell 82dea9c037 HAL_ChibiOS: ensure our reserved ram is not in available ram regions 
this prevents a fault when the ram0 region is filled in by the periph
code on boards that do dynamic memory allocation
 2024-01-21 12:30:08 +11:00
Andrew Tridgell a155f592a4 hwdef: added CubePilot PPPGW builds 2024-01-21 12:30:08 +11:00
Andrew Tridgell 2fee9e69db HAL_ChibiOS: support ROMFS_DIRECTORY in hwdef.dat 2024-01-21 12:30:08 +11:00
Andrew Tridgell 46f65aec4e AP_Periph: moved web UI script to Tools/AP_Periph 
for use in multiple boards
 2024-01-21 12:30:08 +11:00
Andrew Tridgell 69f23edd4a hwdef: added bootloader web server for Pixhawk6X-PPPGW 2024-01-21 12:30:08 +11:00
Andrew Tridgell 654b70da67 HAL_ChibiOS: allow HAL_Semaphore in the bootloader 2024-01-21 12:30:08 +11:00
Peter Barker 8e2a634c72 hwdef: don't enable filesystem-romfs just because we have a defaults file 2024-01-18 21:44:15 +11:00
Peter Barker e958e7b720 hwdef: enable ROMFS if we have a defaults filepath to embed 2024-01-18 21:44:15 +11:00
Peter Barker 3aab3bac52 Tools/AP_HAL_ChibiOS: move defaults from tools to hwdef directory 
Tools: move defaults from tools to hwdef directory
 2024-01-17 18:28:48 +11:00
Peter Barker c4a342f0af AP_HAL_ChibiOS: use @ROMFS/defaults.parm rather than apj_tool for defaul parms 2024-01-17 18:28:48 +11:00
Peter Barker 29f1953ad7 AP_HAL_ChibiOS: remove bad default from kha_eth hwdef 
off is the default, but you have to use 0 not FALSE or it's a redefinition error
 2024-01-17 18:25:55 +11:00
Peter Barker 2e23fa7612 hwdef: remove ghost telemetry from peripherals 2024-01-16 09:46:57 +11:00
Peter Barker f7365556d0 AP_HAL_ChibiOS: tidy disabling of GHST on iomcu 2024-01-16 09:46:57 +11:00
Thomas Watson 5f5673b58f AP_HAL_ChibiOS: match thread stack pointer types to ChibiOS 
`__main_thread_stack_base__` and `__main_thread_stack_end__` are
variables whose address is defined to be the corresponding part of the
stack. These are declared as `extern stkalign_t` in ChibiOS code, and
being declared as `extern uint32_t` in ArduPilot code creates a warning
at link time when using LTO. Correct the declaration to eliminate this
warning.

Also update `__main_stack_base__` and `__main_stack_end__` which don't
currently trigger this warning but serve similar purposes and so might
in the future.

The hardware expects an alignment of `stkalign_t` (which is 8 bytes) and
the linker script defines the variable values with this alignment as
well, so this is safe.

No code size or functional change.
 2024-01-16 09:24:34 +11:00
Peter Barker d0e7039b68 hwdef: remove un-needed AP_PARAM_MAX_EMBEDDED_PARAM default 
these boards have <= 1024, and we have code in place which defaults this value tto 1024
 2024-01-15 20:25:59 +11:00
Peter Barker 7cf66d917c hwdef: correct compilation of revo-mini-sd 
this isn't built on the firmware server, so we won't notice when it dies

In this case the SMBUS batter define was being set differently

Also remove some redundant defines which come from includes anyway
 2024-01-15 20:24:37 +11:00
Peter Barker d4f59cbe5f hwdef: remove HAL_NO_LOGGING from Here4FC-bl.dat 
this was removed from master a long time ago
 2024-01-15 09:40:35 +11:00
Peter Barker ad90e37f21 hwdef: remove bad AP_PERIPH_HAVE_LED lines from bootloaders 
this define is only used within the AP_Periph directory
 2024-01-15 09:40:35 +11:00
Andrew Tridgell 60c69d052b hwdef: added scripting to CubePilot-PPPGW 2024-01-12 19:06:49 -08:00
Andrew Tridgell faea203af6 hwdef: added web UI to PPPGW example 2024-01-12 19:06:49 -08:00
Andrew Tridgell 2c946b92e9 hwdef: added Pixhawk6X-PPPGW 2024-01-12 14:23:34 -08:00
Andrew Tridgell 280d7c6d15 hwdef: added CubePilot-PPPGW 2024-01-12 14:23:34 -08:00
Davide_Lentini 5fdcd876ee AP_HAL_ChibiOS: Update defaults.parm of luminousbee5 board 2024-01-12 20:45:11 +09:00
Andy Piper 3caf336b0f AP_HAL_ChibiOS: switch BetaFPV-F405, BeastF7 and BeastF7v2 to minimize_fpv 2024-01-10 18:32:53 +11:00
Iampete1 416a41e756 AP_HAL_ChibiOS: Only test SPI clock if SPI is enabled 2024-01-10 13:46:40 +11:00
Maxim Buzdalov 809e15acf4 hwdef: Add pinout for Flywoo GOKU F745 AIO v1.2 2024-01-09 10:57:29 +11:00
bugobliterator 57ccac308d AP_HAL_ChibiOS: Add readme file to Here4 FC 2024-01-08 07:05:34 +11:00
bugobliterator ec15951b06 AP_HAL_ChibiOS: add hwdef for Here4FC 2024-01-08 07:05:34 +11:00
bugobliterator bea8b25c5d AP_HAL_ChibiOS: add support for early initialisation of WATCHDOG 
This is needed for Ardupilot Vehicle builds running on AP_Periph bootloaders
 2024-01-08 07:05:34 +11:00
Andrew Tridgell 6ea2c28a4d HAL_ChibiOS: fixed DMA on SPI on H743 
this fixes DMA failures affecting IMUs on H743. The reason for the
failure is not yet clear, but this reverts back to our old stragegy of
always using the bouncebuffer on H7 as a quick workaround
 2024-01-07 19:10:25 +11:00
Andrew Tridgell c54aa0241a HAL_ChibiOS: added mem_is_dma_safe() function 
used for bouncebuffer code and in FATFS code
 2024-01-05 06:52:11 -08:00
Peter Barker c557e67aff chibios_hwdef.py: populate intdefines as part of parsing, not output 2024-01-04 20:29:14 +11:00
jamming 6fe7a1408e hwdef: Add support for BMI088 on Pixhawk6c 2024-01-04 07:17:24 +11:00
Peter Barker ed1ae3b5f1 chibios_hwdef.py: add quiet option to remove parsing debug output 2024-01-03 18:04:37 +11:00
Andrew Tridgell cc8c671cb7 HAL_ChibiOS: don't link evtimer in chibios_board.mk 2024-01-03 12:14:47 +11:00
Andrew Tridgell 418897c443 HAL_ChibiOS: removed old lwip options 2024-01-03 12:14:47 +11:00
Andrew Tridgell 936bbeda88 AP_HAL_ChibiOS: added PRIORITY_NET 2024-01-03 12:14:47 +11:00
Andrew Tridgell 9456b585fa HAL_ChibiOS: don't link lwip bindings from ChibiOS 2024-01-03 12:14:47 +11:00
Andrew Tridgell 5748adbf44 HAL_ChibiOS: allow for networking without ethernet 2024-01-03 12:14:47 +11:00
Peter Barker d5ddbad27f HAL_ChibiOS_Class: adjust for dsp disappearing from HAL constructor 2024-01-03 11:45:31 +11:00
Andrew Tridgell c0d0aeee86 HAL_ChibiOS: reimplement CAN with BinarySemaphore 2024-01-03 07:37:05 +11:00
Andrew Tridgell 8a027eddb0 HAL_ChibiOS: implement BinarySemaphore 
and removed event handles
 2024-01-03 07:37:05 +11:00
Andrew Tridgell c2011570f7 HAL_ChibiOS: use chSysLock for CAN critical section 
this avoids an assert in some code paths that combine with hrt
functions
 2024-01-03 07:37:05 +11:00
Peter Barker 467daeb4a6 hwdef: tidy checking of is-bootloader-build 2024-01-02 13:00:15 +11:00
alexklimaj c53d3ae09b hwdef: ARK_CANNODE add rangefinder 2024-01-02 11:58:35 +11:00
Andrew Tridgell 0a8faa83d9 HAL_ChibiOS: allow for up to 12.5MBps on H7 UARTs 
use 8x oversampling instead of 16x oversampling
 2024-01-02 08:12:37 +11:00
alexklimaj e9f51a96cb hwdef: ARKV6X add USART6 to serial list 2024-01-01 13:17:06 +11:00
Andrew Tridgell 1e626a70cb hwdef: added MatekL431-Serial 2023-12-27 05:13:14 -07:00
Andrew Tridgell 46171a7c79 hwdef: give a more useful error message on no bootloader 2023-12-27 21:45:13 +11:00
Andrew Tridgell d2d2067f1c HAL_ChibiOS: fixed micros and millis on boards without 1MHz clock 2023-12-24 10:10:14 +11:00
Andrew Tridgell 4a59097b5e HAL_ChibiOS: use C implemention of div1000 2023-12-21 09:09:11 +11:00
bugobliterator cf481a8952 AP_HAL_ChibiOS: allow option to enable scripting on CubeRedSecondary 2023-12-21 07:30:25 +11:00
Andrew Tridgell 65cae116a2 hwdef: fixed build of CarbonixL496 2023-12-20 20:07:35 +11:00
Andrew Tridgell a94484d770 HAL_ChibiOS: fixed SPI build on F1xx 
F1 does not have palReadLineMode()
 2023-12-20 19:33:12 +11:00
Andrew Tridgell 6dbc3b6a70 HAL_ChibiOS: speed up millis(), micros64() etc 
these use faster primitives and an assembly division by 1000 to get
between 2x and 3x speedup on these critical calls
 2023-12-19 11:47:24 +11:00
Thomas Watson 2aa4ee8ba7 AP_HAL_ChibiOS: remove references to legacy UART order from hwdefs 2023-12-19 06:53:15 +11:00
Thomas Watson dc4438d0e3 AP_HAL_ChibiOS: eliminate legacy UART ordering/references 
SERIAL_ORDER has been around for a few years now and UART_ORDER is
rejected by the hwdef script, so support for UART_ORDER and associated
processing in the hwdef script is removed, along with the order
conversion script.
 2023-12-19 06:53:15 +11:00
Thomas Watson 507ab623b2 AP_HAL_ChibiOS: pass UARTs to AP_HAL in SERIALn order 2023-12-19 06:53:15 +11:00
Andy Piper ea76c0bd01 AP_HAL_ChibiOS: ensure dshot commands are send to all FMU channels when IOMCU is present 2023-12-18 19:02:52 +11:00
Andy Piper d2a48148dd AP_HAL_ChibiOS: allow bdshot iomcu on non-bdshot fmu 2023-12-18 19:02:52 +11:00
Andy Piper 2415c2998b AP_HAL_ChibiOS: allow dshot to be used even if bdshot was specified. 
correct zero handling in bdshot decoding
 2023-12-18 19:02:52 +11:00
Andy Piper 8c03c9e4bf AP_HAL_ChibiOS: cache values of io_dshot() and io_enabled() 
enabled shared_up_dma to be fully compiled out
address some minor review comments
 2023-12-18 19:02:52 +11:00
Andy Piper a5b6c3b5ef AP_HAL_ChibiOS: utility to print out bdshot encoded data 2023-12-18 19:02:52 +11:00
Andy Piper 9f30d01561 AP_HAL_ChibiOS: bdshot for f103 iofirmware 
add support to tell if shared DMA channel is actually shared
avoid starting and stopping the timer peripheral with bdshot
ensure that rcout DMA allocation and deallocation happens entirely within the lock
increase rcout thread working area for bdshot
fix mode mask that is sent to the iomcu
ensure iomcu rcout thread gets timeouts for callbacks
control bdshot input and output line levels on f103
use input capture channel pairs to read rising and falling edges of telemetry on f103
reset channel pairs together on iomcu
generalize the bdshot input path to support suitable buffer sizes for iomcu
generalize DMAR reading of CCR registers to read two at a time on iomcu
enable bi-directional dshot channels on PWM1-4 on iomcu
add methods to directly access erpm values from rcout
update erpm mask and esc telemetry correctly for firmware supporting dshot
add support for propagating bdmask to iomcu
dshot commands to all channels need to be aware of iomcu
ensure esc type is propagated to iomcu
cope with iomcu channel numbering when using EDT
ensure pwm driver is reset properly for dshot commands on iomcu
correctly reset pwm for dshot commands
correctly mask off bdshot bits going to iomcu
don't reset GPIO modes on disabled lines
don't reset pwm_started when sharing DMA channels
set thread name on iomcu rcout and reduce stack size on iomcu
ensure that bdshot pulses with no response are handled correctly
correctly setup DMA for input capture on f103
deal with out of order captured bytes when decoding bdshot telemetry
ensure DMA sharing on f103 does not pull lines low
only disable the timer peripheral when switching DMA channels on iomcu
add support for waiting for _UP to finish before proceeding with dshot
re-order iomcu dshot channels to let TIM4_UP go first
ensure that a cascading event will always come when expected on rcout
allow timeouts when using cascading dshot
always rotate telemetry channel after trying to capture input
cater for both in order and out-of-order bdshot telemetry packets
cope with reversed packets when decoding bdshot telemetry
ensure UP DMA channel is fully free on iomcu before starting next dshot cycle
refactor rcout for iofirmware into separate file
 2023-12-18 19:02:52 +11:00
tomas.vrsansky e6feebb2fb AP_HAL_ChibiOS: add hwdef files for Airvolute DCS2 onboard FMU 
added ethernet config to hwdef
updated readme.md
hwdef: MAC parameters redefined according to ChibiOS
hwdef: add default params for Airvolute DCS2 on board FMU
update according to new changes in ChibiOS MAC driver
added defines to support ethernet communication
bootloaders: Airvolute-DCS2
 2023-12-12 11:09:09 +11:00
Andrew Tridgell a4fb05de95 HAL_ChibiOS: increase LWIP windows 
now getting 6.8MByte/s with NET_TESTS=4
 2023-12-11 18:00:38 +11:00
Andrew Tridgell 28885dca4c HAL_ChibiOS: adjust buffer sizes 
this fixes issues with TCP accepts being lost in web server
 2023-12-11 18:00:38 +11:00
Andrew Tridgell f603f045b5 HAL_ChibiOS: make lwip debugging easier 
use ap_networking_printf wrapper
 2023-12-11 18:00:38 +11:00
Andrew Tridgell 436c60c7de HAL_ChibiOS: defaults to 50 socket limit 
makes for more useful web server
 2023-12-11 18:00:38 +11:00
bugobliterator 00a65632eb AP_HAL_ChibiOS: add support for swapping ICM42688 with ICM45686 2023-12-06 13:34:52 +11:00
bugobliterator e34e9c61aa AP_HAL_ChibiOS: disable core m4 use to silence the chibios asserts 
checking allocation of peripherals
 2023-12-06 13:31:26 +11:00
Andy Piper cca8f8219a hwdef: new variant of KakuteH7 using ICM42688 2023-12-05 11:41:08 +11:00
Andy Piper 0cc5cf7d2d AP_HAL_ChibiOS: allow betaflight converter to run on output from "dump hardware" 2023-12-05 11:38:53 +11:00
Martin Luessi 6e417f1d0c RADIX2HD: Set HAL_I2C_INTERNAL_MASK 2023-12-05 11:37:57 +11:00
jfbblue0922 c16e1a28df AP_HAL_ChibiOS/hwdef: changed defaults parm in JFB110 board definition 
Co-authored-by: Randy Mackay <rmackay9@yahoo.com>
 2023-11-28 15:58:53 +09:00
Andrew Tridgell f471732aad HAL_ChibiOS: enable SO_REUSEADDR 2023-11-28 12:18:55 +11:00
Andrew Tridgell 0659ab8ef4 HAL_ChibiOS: increase max TCP resources 2023-11-28 12:18:55 +11:00
Henry Wurzburg d9d5e91110 hwdef: update SDH7V1 readme 2023-11-28 11:47:32 +11:00
daniel.li e6b7daa323 AP_HAL_ChibiOS: Add Aocoda-RC-H743Dual target 2023-11-28 10:29:23 +11:00
Thomas Watson 87fef1ae5d AP_HAL_ChibiOS: use get_HAL_mutable() to install new CAN interfaces 
Avoids dubious extern redefinition.
 2023-11-28 08:24:25 +11:00
Thomas Watson a9ddadee3b AP_HAL_ChibiOS: introduce get_HAL_mutable() to complement get_HAL() 
Returns a mutable reference to the same HAL for certain purposes where
the HAL needs to be mutated to avoid UB problems with casting away const
and to make the fact that mutation is happening obvious.
 2023-11-28 08:24:25 +11:00
Tom Pittenger 1f7b4d0938 AP_HAL_ChibiOS: set AP_BATTERY_WATT_MAX_ENABLED 0 for minimize 2023-11-26 11:57:14 +11:00
Tom Pittenger cd6a656acf AP_HAL_ChibiOS: set AP_BATTERY_WATT_MAX_ENABLED 0 for periph 2023-11-26 11:57:14 +11:00
Peter Barker 27f836b66e hwdef: correct ARK_CANNODE compilation 
this was turning SPI on when there aren't any devices...
 2023-11-25 13:47:13 -08:00
alexklimaj ddba794420 hwdef: ark_rtk_gps fix safety led 2023-11-25 13:45:56 -08:00
Peter Barker e9fc99b1bf AP_HAL_ChibiOS: base HAL_USE_SPI on devices not buses 
fixes compilation problem with gcc 10.3

../../libraries/AP_HAL_ChibiOS/SPIDevice.cpp: In static member function 'static void ChibiOS::SPIDeviceManager::__static_initialization_and_destruction_0(int, int)':
../../libraries/AP_HAL_ChibiOS/SPIDevice.cpp:76:18: error: statement has no effect [-Werror=unused-value]
   76 | ChibiOS::SPIDesc SPIDeviceManager::device_table[] = { HAL_SPI_DEVICE_LIST };
      |                  ^~~~~~~~~~~~~~~~
compilation terminated due to -Wfatal-errors.
cc1plus: some warnings being treated as errors
 2023-11-22 18:14:00 +11:00
Peter Barker 15e0f689c2 AP_HAL_ChibiOS: correct AP_Filter defines 
- checking the build type is very rarely used and definitely not required here
 - fix boilerplate to conform to normal pattern of including the config header and #if'ing based on the _ENABLED directly after that
 2023-11-21 21:13:42 +11:00
Andy Piper 229916a48c AP_HAL_ChibiOS: enable serial LEDs on ARK_CANNODE 2023-11-20 19:23:06 +11:00
Andy Piper 73610c8932 AP_HAL_ChibiOS: return success status from serial_led_send and set_serial_led_rgb_data 2023-11-20 19:22:20 +11:00
Andy Piper b7fd04318a AP_HAL_ChibiOS: fix race condition in sending serial LED data 2023-11-20 19:22:20 +11:00
Andrew Tridgell 2ba4bf1478 HAL_ChibiOS: allow for --disable-networking 2023-11-17 10:54:24 -08:00
Andrew Tridgell 6bf3debe73 HAL_ChibiOS: default disable ICE in periph 2023-11-17 13:09:02 +11:00
Tom Pittenger ac16f10ecd AP_HAL_ChibiOS: hwdef kha_eth to show SerialManager params 2023-11-16 10:58:50 -08:00
Jonathan Loong 16c55a3bc1 AP_HAL_ChibiOS: Add in CarbonixF405 QMC5883P compass enable 2023-11-15 10:53:38 +11:00
Jonathan Loong 8d64d5215e AP_Periph: CarbonixL496 crystal hwdef changes 2023-11-15 10:53:38 +11:00
Andy Piper 7639761d28 AP_HAL_ChibiOS: correct neopixel bitwidth 
Use 64-bit timestamps for dshot send checks
 2023-11-14 11:06:25 +11:00
Henry Wurzburg 4681e5fba6 hwdef:correct JFB110 defaults 2023-11-14 10:55:33 +11:00
Andrew Tridgell 2f9bfb648f HAL_ChibiOS: default RTS pins to PULLDOWN 
this avoids issues with SiK and RFD900x radios getting stuck in
bootloader mode due to a high RTS pin on power on.

We did this for Pixhawk6C in this PR:
https://github.com/ArduPilot/ardupilot/pull/24169

this now applies it to all boards
 2023-11-12 07:26:50 +11:00
Cedric0489 95dbb7a3f5 AP_HAL_ChibiOS: added PixPilot-C3 2023-11-10 17:14:18 +11:00
Henry Wurzburg ba76d4e2f9 hwdef:save flash on FlywooF405S-AIO 2023-11-09 12:49:13 +11:00
Andrew Tridgell 7b6ad15f90 hwdef: make f103-QiotekPeriph a single compass 
dual compass periph is not supported
 2023-11-08 18:34:41 +11:00
Peter Barker d2a3fed4a1 hwdef: AP_BATTERY_ESC_ENABLED needs HAL_WITH_ESC_TELEM 2023-11-08 18:05:55 +11:00
yjuav f7dd6dec96 hwdef: add YJUAV_A6SE_H743 board support 2023-11-07 10:31:20 +11:00
jfbblue0922 7d4d2f98bf AP_HAL_ChibiOS: corrected analog input pin number 2023-11-02 19:08:09 +11:00
bugobliterator 5bd5aa87a7 AP_HAL_ChibiOS: add CubeNode pinout diagram 2023-11-01 14:18:02 +00:00
Andy Piper 2bef8f2cad AP_HAL_ChibiOS: add support for SpeedyBeeF405v4 2023-11-01 19:25:19 +11:00
Andrew Tridgell cd3eab3c5d hwdef: support Holybro Pixhawk6X_Rev6 2023-10-31 10:42:25 +11:00
Andrew Tridgell 6173726846 HAL_ChibiOS: fail on badly formed SPIDEV line 2023-10-31 10:42:25 +11:00
Peter Barker 9dbd6f335a hwdef: minimize_features on mini-pix, not minimize_fpv_osd 2023-10-31 09:13:01 +11:00
Henry Wurzburg e474305c6d hwdef:free flash for space critical bds 2023-10-28 13:32:19 +11:00
Peter Barker f70a510c6b AP_HAL_ChibiOS: move AP_BOOTLOADER_FLASHING_ENABLED default to AP_HAL 
.... need the defines on HALs other than ChibiOS
 2023-10-27 14:16:47 +11:00
Peter Barker 90607ffa5f hwdef: remove payload place from minimized boards 2023-10-27 14:15:53 +11:00
Peter Barker ba72b7edfd hwdef: fix speedybeef4v3 build 
double-definition
 2023-10-26 18:15:30 +11:00
Peter Barker 8e5708b6f2 speedybeef4: remove redefinition of AP_BATTERY_SYNTHETIC_CURRENT_ENABLED 2023-10-26 18:15:30 +11:00
Peter Barker f5045384cf hwdef: correct ReaperF745 build 2023-10-26 18:15:30 +11:00
Peter Barker b757319245 hwdef: fix KakuteF4Mini build 
redefinition
 2023-10-26 18:15:30 +11:00
Peter Barker 38db3d8cbc hwdef: fix F35Lightning build 
.... and remove redundantdefine
 2023-10-26 18:15:30 +11:00
Andy Piper 9ba9553d96 AP_HAL_ChibiOS: NFC refactor of dshot/bdshot in preparation for bdshot on iomcu 2023-10-25 19:30:35 +11:00
Andy Piper fee43af729 AP_HAL_ChibiOS: enable highres sampling on CubeOrangePlus 2023-10-25 19:23:11 +11:00
Peter Barker b86c5b7eea hwdef: remove unused HAL_NO_LOGGING define from hwdefs 2023-10-25 19:17:18 +11:00
Peter Barker 28e89505fe hwdef: remove redundant HAL_GCS_ENABLED lines 2023-10-25 19:17:18 +11:00
Peter Barker 6152059843 hwdef: rearrange FlyingMoonH743 IMU order 2023-10-25 09:47:43 +11:00
Peter Barker 782b51b89b hwdef: rearrange FlyingMoonF427 IMU order 2023-10-25 09:47:43 +11:00
Tom Pittenger 4dc9d1ebc7 AP_HAL_ChibiOS: enable scripting on CubeOrange-periph-heavy 2023-10-23 22:44:35 -07:00
Henry Wurzburg 5c546dedcb hwdef:include minimal in minimize_common 2023-10-24 12:20:41 +11:00
Andy Piper 51793ef5ca hwdef: bugfixes for BETAFPV-F405 2023-10-24 11:44:54 +11:00
Martin Luessi 0970cb29c7 AP_HAL_ChibiOS: RADIX2HD Probe external I2C compasses 2023-10-24 10:44:57 +11:00
Martin Luessi 04564882fa AP_HAL_ChibiOS: Add UART7 to RADIX2HD target 2023-10-24 10:05:57 +11:00
Michael du Breuil 0739f0839f AP_HAL_ChibiOS: Add sw-spar-f407 periph target 2023-10-24 09:48:13 +11:00
bugobliterator fd319c6b2c AP_HAL_ChibiOS: fix setting APP_RAM size 
also allows passing APP_RAM_START index through hwdef
 2023-10-23 10:43:42 +11:00
Peter Barker 5b34a9bf13 hwdef: remove redundant MODE_TURTLE_ENABLED 
this is defined later in the file
 2023-10-19 20:53:28 +11:00
AerofoxTech 63f28b6720 hwdef: To adapt the rotation directionof the QMC5883L on new Aerofox-Airspeed-DLVR 2023-10-18 19:50:46 +11:00
AerofoxTech c0780a45c1 hwdef: Adapt the rotation direction of the QMC5883L 2023-10-18 19:50:10 +11:00
bugobliterator 1ae842e4ed AP_HAL_ChibiOS: add option to set HAL_SPI_SCK_SAVE_RESTORE 2023-10-18 19:25:19 +11:00
bugobliterator 6c13d7bee9 AP_HAL_ChibiOS: fix mode setting for ICM45686 on CubeOrangePlus 2023-10-18 19:25:19 +11:00
bugobliterator 57f6f8e34d AP_HAL_ChibiOS: add support for saving and restoring SCK pin state 
when SPI goes into undefined state during reset
 2023-10-18 19:25:19 +11:00
Andy Piper 7a937cd23a AP_HAL_ChibiOS: correct printing of timer information 2023-10-18 18:01:48 +11:00
Henry Wurzburg 42d4b2671b hwdef:fix bug in AtomRCF405NAVI,fix some bds that aren't building 2023-10-17 18:21:04 +11:00
Iampete1 e736d5ecb7 AP_HAL_ChibiOS: hwdef: scripts: defaults_periph: disable unused libaries by defualt 2023-10-17 10:23:20 +11:00
muramura e0a012919c hwdef: Cite CubeOrange-SimOnHW as the default file 2023-10-14 17:55:56 +11:00
Peter Barker 4b0958fb4f hwdef: correct compilation of CubeOrange-SimOnHW 
../../libraries/AP_InertialSensor/AP_InertialSensor_config.h:20:2: error: #error "INS_AUX_INSTANCES must be zero if INS_MAX_INSTANCES is less than 3"
   20 | #error "INS_AUX_INSTANCES must be zero if INS_MAX_INSTANCES is less than 3"
      |  ^~~~~
 2023-10-13 17:26:35 +11:00
jfbblue0922 0f1e766269 AP_HAL_ChibiOS: JFB110 board definition 
Co-authored-by: Randy Mackay <rmackay9@yahoo.com>
 2023-10-12 17:03:04 +11:00
Peter Barker 28d827cedc AP_HAL_ChibiOS: add RTC support to GPS periphs that log 
this re-adds support for RTC into GPS peripherals that also log.  This was removed as these boards were calling methods on the nullptr
 2023-10-11 19:17:27 +11:00
Peter Barker cf96791fe2 AP_HAL_ChibiOS: add and use HAP_PERIPH_ENABLE_RTC 2023-10-11 19:17:27 +11:00
Peter Barker 53f4709a78 AP_HAL_ChibiOS: disable RTC on periphs 
the singleton isn't instantiated
 2023-10-11 19:17:27 +11:00
Henry Wurzburg 912a088c2b hwdef: Create correct README and add defaults to ease setup 2023-10-11 19:11:16 +11:00
muramura 007c3460ea AP_ChibiOS: Delete the same definition 2023-10-11 14:42:32 +11:00
rishabsingh3003 5897aab566 hwdef: add MatekL431 ADSB Periph 2023-10-09 16:18:13 -07:00
thu5cob 49d7d0b1c4 HAL_ChibiOS: Fix stm32l4+ flash issue 
stm32l4+ flash reset register has been reset properly
 2023-10-06 14:52:34 +11:00
Henry Wurzburg de7dd9d692 hwdef:add VTX power control to SpeedyBeeF405-Wing 2023-10-06 14:51:52 +11:00
Peter Barker 3b2dec7ec6 hwdef: CubeOrangePlus: build abin files 
... for use with flash-from-SD-card
 2023-10-05 18:55:48 +11:00
alexklimaj e1b991a84a hwdef: ARKV6X ADIS16507 example 2023-10-05 08:21:50 +11:00
Peter Barker fe9932855b hwdef: HerePro requires AHRS to compile 2023-10-04 18:10:58 +11:00
Andy Piper 9ff3d21c20 AP_HAL_ChibiOS: add support for NeoPixelRGB 2023-10-04 18:06:17 +11:00
Andrew Tridgell da0870f616 HAL_ChibiOS: enable mavlink bindings for ADSB periph 2023-10-02 21:45:28 +11:00
Peter Barker e2975a67e7 AP_HAL_ChibiOS: use AP_GPS_ENABLED to exclude more code when GPS not compiled in 2023-09-27 16:38:15 +10:00
Peter Barker 0824eca776 AP_GPS: use AP_GPS_ENABLED to exclude more code when GPS not compiled in 2023-09-27 16:38:15 +10:00
Andy Piper 82452758b4 AP_HAL_ChibiOS: write out serial ports that are available when configuring 2023-09-26 11:31:08 +10:00
James O'Shannessy 70bee8e67a AP_HAL_ChibiOS: Explicitly include InternalError 
Debug builds utilise internal error in the Util class.

The include was being passed up from Logger->LoggerMessageWriter->LoggerBackend->Bitmask.
Periph Builds tend not to have HAL_LOGGING_ENABLED, and so the include was not present.
 2023-09-20 19:51:48 +10:00
Andy Piper 36fc7521ea AP_HAL_ChibiOS: modify prescaler based on dshot type 2023-09-20 17:35:44 +10:00
Andy Piper 1b1e5b1085 hwdef: correct inversion pin on MambaF405v2 
correct battery setup for MambaF405v2
provide suitable serial defaults for MambaF405v2
reallocate DMA channels to allow full DMA on USART3 and NeoPixel on MambaF405v2
add camera control pin to MambaF405v2
 2023-09-19 11:43:58 +10:00
Henry Wurzburg d13085d4bb HWDEF:Correct hwdef of BETAFPV-F405 2023-09-19 08:03:58 +10:00
Andrew Tridgell ebffc8fc65 HAL_ChibiOS: fixed CAN statistics on F4/L4/F3/F7 2023-09-19 07:33:53 +10:00
subashchandar d1e8cef9b6 AP_HAL_ChibiOS: Increase limit for Storage pages 
STm32l4+ has 512 flash pages in dual flash mode
 2023-09-17 21:03:37 +10:00
subashchandar 2207f7bb14 AP_HAL_ChibiOS: change adc sampling rate 
STm32l4r5 adc sampling rate.
 2023-09-17 21:02:42 +10:00
Davide_Lentini 5b0d7928bd hwdef: Update luminousbee5 defaults.parm 2023-09-14 12:40:59 +10:00
Michael du Breuil dcfd9f6586 AP_HAL_ChibiOS: Add sw-nav-f405 target 
Navlight board with a compass, requires #24945 for status light to work
 2023-09-14 10:56:20 +10:00
Henry Wurzburg ae05df22eb HWDEF: Correct define errors in HEEWING and Tmotor bds 2023-09-14 10:38:01 +10:00
TunaLobster 6f80f8f200 AP_HAL_ChibiOS: Add hwdef for ARK_CANNODE 2023-09-13 17:06:02 +10:00
Andy Piper f02b34fc02 hwdef: mRoControlZeroOEMH7 bdshot version 2023-09-13 17:04:24 +10:00
Andy Piper feabd1f568 AP_HAL_ChibiOS: hwdef for Flywoo F405 Pro 2023-09-13 17:03:51 +10:00
Andy Piper 9387236e6c AP_HAL_ChibiOS: prefer bi-directional dshot channels that can be shared on F4 and F7 2023-09-13 17:03:51 +10:00