Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
12,433 Commits 71 Branches 509 Tags 790 MiB
Commit Graph

5438 Commits

Author SHA1 Message Date
Andrew Tridgell 493c5dd63f GCS_MAVLink: rebuild MAVLink headers 2014-04-04 21:57:22 +11:00
Andrew Tridgell 14b3696959 GCS_MAVLink: added SERIAL_CONTROL message definition 
will be used for on-board radio and GPS firmware update and control
over USB
 2014-04-04 21:57:22 +11:00
Andrew Tridgell 07d621c4be AP_NavEKF: used state structure in more places 
makes the code a bit easier to read

Pair-Programmed-With: Paul Riseborough <p_riseborough@live.com.au>
 2014-04-04 21:30:16 +11:00
priseborough aa5335b16e AP_NavEKF : Improved GPS position glitch handling 
When using GPS after previously rejecting it, the GPS position will
always be offset if outside the specified glitch radius. This was the
original intent of the design and makes handling of glitches smoother.

It has been tested on replay using glitchy flight data
 2014-04-04 21:01:22 +11:00
priseborough b1786cf1e5 AP_NavEKF : Do not reset on GPS velocity timeout if good position data 2014-04-04 21:01:20 +11:00
priseborough d25883f712 AP_NavEKF : Limit rate of Z accel bias adaptation 
Aliasing can causes the bias estimate to fluctuate very rapidly as it tries
to keep up, which degrades the benefit of switching between
accelerometers to avoid aliasing.

This patch give a much more stable bias estimate during aliasing, and
allows the bias to adapt at a maximum rate of 1.0 m/s2 in 50 seconds
 2014-04-04 21:01:18 +11:00
priseborough 36b3cbc365 AP_NavEKF : Relax aliasing check limits 
This reduces the chance of noisy data inhibiting GPS glitch protection
 2014-04-04 21:01:15 +11:00
priseborough 0ae736c3a0 AP_NavEKF : clean up convoluted logic used in sensor health checks 
This doesn't change the behavior, but does make the code easier to
understand
 2014-04-04 21:01:13 +11:00
Andrew Tridgell 013aaf4d3e GCS_MAVLink: moved comms functions to not be inline 
saves a bit of flash space
 2014-04-04 13:19:15 +11:00
Andrew Tridgell d9d038345a AP_GPS: save 800 bytes of code space on APM2 
we can assume a single GPS
 2014-04-04 10:08:28 +11:00
Andrew Tridgell 9f857529ca AP_GPS: auto-switch primary GPS based on status and number of satellites 2014-04-04 08:32:34 +11:00
Andrew Tridgell 11f196318e RC_Channel: added static functions to simplify operations on all channels 
this avoids vehicle code having to loop over all channels for common
operations
 2014-04-03 12:18:56 +11:00
Andrew Tridgell 21c205a57e AP_GPS: cope with different MON-HW message size in u-Blox Neo7 2014-04-03 10:55:05 +11:00
Andrew Tridgell cd3038fabd AP_NavEKF: fixed return of offset in getVariances() 2014-04-03 07:49:06 +11:00
Andrew Tridgell dcb42af3e9 AP_BattMonitor: fixed example build 2014-04-03 07:49:06 +11:00
Craig Elder 3a92d75936 Ublox: Enable 1Hz Lock LED by default 2014-04-01 20:57:18 -07:00
Andrew Tridgell 067bbf5b5c DataFlash: hdop is unsigned 2014-04-02 07:55:28 +11:00
Andrew Tridgell e40a048009 AP_GPS: handle multiple GPS in GPS setHIL() 2014-04-02 07:55:28 +11:00
Andrew Tridgell 79f5618f6f AP_GPS: zero state structure on driver release 
this ensures no values are left from the previous driver
 2014-04-02 07:55:28 +11:00
Randy Mackay 2ddc414f4d InertialNav: replace safe_sqrt with pythagorous2 2014-04-01 20:43:53 +09:00
Randy Mackay 90e205c905 AC_PosControl: replace safe_sqrt with pythagorous2 2014-04-01 20:43:51 +09:00
Randy Mackay 15da01cf3a AC_WPNav: replace safe_sqrt with pythagorous2 2014-04-01 20:43:45 +09:00
Andrew Tridgell b8e4e35a0d AP_Airspeed: use pythagorous3() 2014-04-01 22:15:12 +11:00
Andrew Tridgell a7f213a5c5 AP_NavEKF: use pythagorous2() 2014-04-01 22:13:03 +11:00
Andrew Tridgell 9ab1a79b5a AP_Airspeed: changed sqrt() to sqrtf() 2014-04-01 22:09:21 +11:00
priseborough 09c5ba1aed Dataflash : Improved logging of EKF sensor health checks 
This changes the definition sof the messages in the EKF4 message to make it more useful
The values shown now relate directly to how much margin there is before a measurement
is rejected, enabling better tuning of error trap parameters
 2014-04-01 21:27:07 +11:00
priseborough 04036d7777 AP_NavEKF : Updated GPS glitch protection logic 
This adds new functionality to the detection and compensation of GPS
glitches:

1) A maximum allowable innovation is calculated using the GPS noise
parameter multiplied by the gate, with an additional component allowing
for growth in position uncertainty due to acceleration error since
the last valid measurement
2) Includes per vehicle type values for the acceleration error limit
3) If the innovation length exceeds the maximum allowable, no fusion occurs
4) If no fusion has occurred for long enough such that the position uncertainty
exceeds the maximum set by a per vehicle parameter or a maximum time, an offset
is applied to the GPS data to so that it matches the value predicted by the filter
5) The offset is never allowed to be bigger than 100m
6) The offset is decayed to zero at a rate of 1.0 m/s to allow GPS jumps to
be accommodated gradually
7) The default velocity innovation gate has been tightened up for copter and rover
8) The variance data logging output has been updated to make it more useful
 2014-04-01 21:22:14 +11:00
Andrew Tridgell 7e2ef0cfc0 AP_GPS: fixed GPS for Replay 2014-04-01 17:25:15 +11:00
Andrew Tridgell 9278685cdf AP_Math: fixed location build on SITL 2014-04-01 14:20:10 +11:00
Andrew Tridgell 77e2f48581 AP_GPS: fixed notify updates for new API 2014-04-01 06:38:25 +11:00
Andrew Tridgell 9781175bf5 AP_GPS: fixed handling of driver destruction 
this allows for more complex destructors, and ensures we don't have
multiple backends allocated at once per instance
 2014-04-01 06:38:25 +11:00
Andrew Tridgell 7ceba8dce4 AP_GPS: prevent double allocation of GPS drivers 2014-04-01 06:38:25 +11:00
Andrew Tridgell 8779ffe088 AP_GPS: flush pending config strings when uBlox starts 2014-04-01 06:38:25 +11:00
Andrew Tridgell 0191355488 AP_GPS: fixed init strings to all be in progmem 
and sent async ...
 2014-04-01 06:38:25 +11:00
Andrew Tridgell bc0c9ad6d5 AP_InertialNav: fixed example build 2014-04-01 06:38:25 +11:00
Andrew Tridgell 35c111a63a AP_AHRS: fixed example build 2014-04-01 06:38:25 +11:00
Andrew Tridgell 7b2d56a8cb AC_Fence: disable example build 
fails to build with compiler error
 2014-04-01 06:38:25 +11:00
Andrew Tridgell 3b8c6e629d AC_AttitudeControl: updated example for new GPS API 2014-04-01 06:38:25 +11:00
Andrew Tridgell c2486d8d6e AP_GPS: updated examples for new API 
removed old per-driver examples, and updates AUTO example
 2014-04-01 06:38:25 +11:00
Andrew Tridgell d04d33a02d AP_InertialNav: convert to new GPS API 2014-04-01 06:38:24 +11:00
Andrew Tridgell 5a2e84e792 AP_NavEKF: changes for new GPS API 2014-04-01 06:38:24 +11:00
Andrew Tridgell b7a2db716b AP_Arming: convert to new GPS API 2014-04-01 06:38:24 +11:00
Andrew Tridgell eb67948171 AP_Mount: convert to new GPS API 2014-04-01 06:38:24 +11:00
Andrew Tridgell f07e4dee52 AP_AHRS: convert to new GPS API 2014-04-01 06:38:24 +11:00
Andrew Tridgell 31d3b6555f DataFlash: convert to new GPS API 2014-04-01 06:38:23 +11:00
Andrew Tridgell 368daf89f1 AP_GPS: new GPS API 
This is a complete rewrite of the GPS driver structure, with a static
main driver and separate backend drivers. This will allow proper
support for multiple GPSes, and will allow parameters to be set on the
GPS object
 2014-04-01 06:38:23 +11:00
Andrew Tridgell 2dd92832dc AP_GPS: support multiple AP_GPS_Auto drivers 
move all static variables into a dynamically allocated structure in
the AUTO driver which gets freed when we have found a GPS type
 2014-04-01 06:38:23 +11:00
Andrew Tridgell 3c4389180e AP_GPS: removed GPS_406 driver 
this driver was untested and badly structured. If we want to support
the 406 we can revive it and do it properly
 2014-04-01 06:38:23 +11:00
Jonathan Challinger f0fc0397d3 Notify: add arming failure tone 2014-03-31 20:34:27 +09:00
Randy Mackay 7bb981f2df AP_Notify: correct dos formatting 2014-03-31 20:34:24 +09:00
Andrew Tridgell 31082f4ce2 AP_Mission: fixed a bug re-entering AUTO 
this fixes a bug found by Marco where we would continue in CRUISE mode
with no waypoint if we re-entered AUTO after a mission reset
 2014-03-31 06:18:07 +11:00
Randy Mackay 93f8d53d1b Mission: make get_prev_nav_cmd_index const 2014-03-30 23:09:54 +09:00
Randy Mackay b15d4379d8 AC_WPNav: use atan2f, make methods const 2014-03-30 23:09:51 +09:00
Randy Mackay 3ad635feeb AC_AttControl: 45deg/sec yaw rate for Auto, RTL 2014-03-30 15:44:14 +09:00
Randy Mackay d27ca53a9d AC_WPNav: spline sets origin vel to zero when no prev segment 
Issue caught by Michael Oborne
 2014-03-30 15:19:18 +09:00
Randy Mackay 7dfde39e19 AC_WPNav: advance_spline to use dt 2014-03-30 15:02:07 +09:00
Randy Mackay c0458b786a AC_WPNav: check acceleration is non zero 2014-03-30 11:52:44 +09:00
Randy Mackay f0f3688172 AC_WPNav: rounder corners for short spline segments 2014-03-30 11:52:41 +09:00
priseborough 9c5f564dc5 AP_NavEKF : Fixes bug in initial earth magnetic field states 
The calculation for these states was not being bias corrected
 2014-03-30 07:43:52 +11:00
Randy Mackay 7bff8e9312 AC_AttControl: constrain earth frame yaw angle error 
This temporarily resolves the wobble we see in Auto when the target
heading is suddenly changed leading to a large yaw angle error
 2014-03-29 20:42:21 +09:00
Randy Mackay 197683d539 WPNav: clean up spline comments 2014-03-29 17:57:47 +09:00
priseborough e1819bb53a AP_NavEKF : Add initial parameter defaults for Copter, Rover and Plane 2014-03-29 14:06:43 +11:00
Randy Mackay ac339a0289 Mission: add decoding of NAV_SPLINE command 2014-03-28 09:23:30 +09:00
Randy Mackay e7be622eef GCS_MAVLink: generate after adding NAV_SPLINE cmd 2014-03-28 09:23:28 +09:00
Randy Mackay 519d5fc444 GCS_MAVLink: add MAV_CMD_NAV_SPLINE_WAYPOINT cmd 
This is the same as a NAV_WAYPOINT except that the vehicle flies a
spline curved path to the destination
 2014-03-28 09:23:23 +09:00
Randy Mackay 24eb195aa3 WPNav: add yaw control for straight line wp nav 2014-03-28 09:23:13 +09:00
Randy Mackay b42b12f7be AC_WPNav: add get_spline_yaw 2014-03-28 09:23:07 +09:00
Randy Mackay f2d9ad41aa Mission: minor comment update 2014-03-28 09:22:56 +09:00
Randy Mackay e5e71ce371 WPNav: add spline support 2014-03-28 09:22:53 +09:00
Michael Day e1d193f539 GCS_MAVLink: Generated code from message additions for autofence. 2014-03-27 09:26:20 +11:00
Michael Day c5ebd120f1 GCS_MAVLink: XML for MAV_CMD_DO_FENCE_ENABLE and MAV_SYS_STATUS_GEOFENCE 2014-03-27 09:26:20 +11:00
priseborough 55c60b8f07 AP_NavEKF : Reduce Magnetometer innovation consistency check threshold 2014-03-26 21:29:47 +11:00
priseborough 45b1a2fa46 AP_NavEKF : Reduce GPS position innovation consistency fail threshold 
This patch reduces the maximum acceptable GPS jump from approximately 16 to 8 metres
This will provide copters with more protection for close in loiter situations
 2014-03-26 21:29:45 +11:00
Andrew Tridgell 8c0c9c317e RC_Channel: prevent a numerical exception with bad mount parameters 2014-03-26 17:38:27 +11:00
Andrew Tridgell bafc664750 AP_NavEKF: use APM_BUILD_TYPE() macro 2014-03-26 12:42:11 +11:00
Andrew Tridgell fbec098e2f AP_Vehicle: added APM_BUILD_TYPE() macro 
this makes checking build type less fragile
 2014-03-26 12:41:53 +11:00
Andrew Tridgell e3792f9b26 AP_NavEKF: added a mechanism for per-vehicle-type defaults in EKF 2014-03-26 12:30:17 +11:00
Andrew Tridgell 6b2f0b9553 AP_Vehicle: added defines for main vehicle types 2014-03-26 12:15:45 +11:00
Andrew Tridgell 6bf2b5033e DataFlash: support logging up to 14 RC input channels 2014-03-25 16:39:19 +11:00
Andrew Tridgell 6039eab442 RC_Channel: support up to 12 aux channels on PX4 
this allows RC13 and RC14 to work correctly as aux outputs on Pixhawk
 2014-03-25 15:42:48 +11:00
Andrew Tridgell 64772cede8 GCS_MAVLink: rebuild MAVLink headers 2014-03-25 14:47:43 +11:00
Andrew Tridgell d24547b390 GCS_MAVLink: merge latest msgs from upstream 2014-03-25 14:47:05 +11:00
Andrew Tridgell 6eee2421cc AP_HAL: removed RCInput valid_channels() and added new_input() and num_channels() 
the valid_channels() method was inconsistently implemented between
boards, and served two quite different purposes. It is clearer as two
functions
 2014-03-25 14:39:41 +11:00
Andrew Tridgell 27dbf608c8 DataFlash: fixed a build warning 2014-03-25 13:31:21 +11:00
Andrew Tridgell 2a9a89e020 HAL_PX4: fixes for merged upstream PX4Firmware 2014-03-25 10:30:00 +11:00
priseborough 17cdac7bc8 AP_NavEKF : Clean up angle and mag field initialisation 
This path reduces duplicated code, eliminates unused variables and
causes the earth magnetic field states to be reset when exiting static mode
which will occur every time copter is armed. This enables copters to be
powered on and initialised inside vehicles or houses, without bad earth
field values affecting flight.
 2014-03-24 19:54:48 +11:00
Andrew Tridgell f05b90bfd2 GCS_MAVLink: fixed some compiler warnings 2014-03-24 12:52:39 +11:00
Andrew Tridgell 0af35bd636 AP_Mission: fixed some compiler warnings 2014-03-24 12:52:27 +11:00
Andrew Tridgell 2763393908 AP_InertialSensor: fixed some compiler warnings 2014-03-24 12:52:16 +11:00
Andrew Tridgell c6f3e0a81c AP_GPS: fixed example builds 2014-03-24 12:20:34 +11:00
Andrew Tridgell 271ba3a6bc AP_InertialNav: fixed example build 2014-03-24 12:03:47 +11:00
Andrew Tridgell 1b1a92251f DataFlash: allow drivers to setup their own logging formats 
this allows drivers to ask the dataflash driver to add new log formats
 2014-03-24 12:03:31 +11:00
Andrew Tridgell 5630bb1ef6 AP_GPS: added detailed hardware status logging for uBlox 
this gives us noise, jamming and RF information from the uBlox
protocol. This will hopefully allow a more detailed investigation of
antenna choices and RF interference
 2014-03-24 12:02:37 +11:00
Andrew Tridgell 7ff293ca38 AP_GPS: added DataFlash to GPS init to allow for detailed logging 
this will allow GPS drivers to log much more detailed device specific
information
 2014-03-24 12:01:13 +11:00
Andrew Tridgell 485ae596fc AP_Compass: fixed last_update for secondary compass with primary failed 
this ensures EKF and DCM will use a secondary compass if the primary
fails
 2014-03-23 22:05:17 +11:00
Matthew Lloyd 60a4f74de6 AP_Compass: avoid division by zero if we haven't received any mag reports 
Otherwise, get_field() will return NaNs after once every few calls to
read() during compassmot on PX4 platforms, which causes compassmot to fail.

This is a quick hack around the deeper issue, which could be something
like the PX4 mag driver experiencing starvation and skipping mag reports,
buffer overrun or something else that causes mag reports to be dropped.
Or perhaps we should never expect in the first place that we will always
receive at least one mag report between calls to read().
 2014-03-23 21:22:32 +11:00
priseborough 7ae86b3979 AP_NavEKF : Track baro height observations pre-arm 
This prevents copter from failing the pre-arm height discrepancy test
 2014-03-23 18:25:50 +11:00
priseborough 7780d55788 AP_NavEKF : Prevent large magnetic field adaptations early in flight 2014-03-22 19:55:26 +11:00
Randy Mackay 3efad982c0 GCS_Mavlink: return MISSION_INVALID when conversion fails 
Requested by MichaelO to allow better error message to be displayed to
user when the mission upload from the GCS to vehicle fails
 2014-03-22 11:29:36 +09:00
Paul Riseborough f7007569d1 AP_NavEKF : Fix bug that limits copter sensor delay compensation to 125 
msec
 2014-03-21 21:52:20 +11:00
Paul Riseborough b2c0979947 AP_NavEKF : Fixes bug that causes accel bias to diverge in static mode, preventing copter arming 2014-03-21 21:49:50 +11:00
Andrew Tridgell a55c4e2296 AP_TECS: set target airspeed, not min/max airspeed, on landing 
this seems to prevent ballooning of the altitude when we are in the
landing approach, and gives a much smoother landing
 2014-03-20 17:34:39 +11:00
Andrew Tridgell 98530928b5 AP_TECS: make target landing speed a float 
some users may want more precise control
 2014-03-20 17:34:36 +11:00
Andrew Tridgell b1ad2be897 AP_SpdHgtControl: added get_target_airspeed() interface 2014-03-20 17:34:29 +11:00
Michael Day bd7e1b82e1 AP_TECS: Auto landing now takes throttle_nudge into account. 2014-03-20 17:34:26 +11:00
Michael Day 861690dea2 AP_TECS: New params LAND_ARSPD and LAND_THR auto-slowing landings. 
Also controlling pitch by ignoring height error during landing.
This serves to keep the nose up.
 2014-03-20 17:34:23 +11:00
Andrew Tridgell 3bdc22d672 AP_Mission: make p1 16 bit 
this gives us a 16 bit value for extra data on a location, allowing
for an accurate angle in centi-degrees.

Also add validation of the size of the union arms in Content
 2014-03-20 16:57:09 +11:00
Andrew Tridgell 959cafef8d AP_Common: make alt in Location 24 bit 
this allows for up to 83km mission altitudes, while allowing for 1
more byte in the command structure, making p1 16 bits
 2014-03-20 16:57:09 +11:00
Andrew Tridgell d508c7f37f GCS_MAVLink: re-generate MAVLink headers 2014-03-20 10:21:28 +11:00
Andrew Tridgell 106fda773f GCS_MAVLink: merge XML from upstream 2014-03-20 10:20:00 +11:00
Andrew Tridgell 8af9573806 GCS_MAVLink: allow logging of RADIO_STATUS, very useful for link analysis 2014-03-20 09:56:37 +11:00
Michael Day 68dbfd6315 DataFlash: Add Log_Write_Radio to store RSSI and noise on board. 2014-03-20 09:56:37 +11:00
Andrew Tridgell 8202cf437b AP_Relay: fixed Pixhawk relay pin numbers 
thanks to Craig for spotting this!
 2014-03-20 09:40:08 +11:00
Paul Riseborough 8a2d16d13d AP_NavEKF : modifed Zaccel bias noise parameter to prevent unstable bias estimate 2014-03-20 08:50:00 +11:00
Randy Mackay c520cb789c Mission: cmd field types to match mavlink commands 
Split Set-Servo and Repeat-Servo command structures
Split Set-Relay and Repeat-Relay command structures
 2014-03-19 12:14:22 +09:00
Andrew Tridgell 0832aba6bc GCS_MAVLINK: moved deferred message handling into common code 2014-03-19 12:14:15 +09:00
Andrew Tridgell 8d89a64312 GCS_MAVLink: moved handling of MISSION_ITEM into common code 2014-03-19 12:14:09 +09:00
Andrew Tridgell ba8c4b86a0 AP_InertialNav: fixed example build 2014-03-19 12:14:08 +09:00
Andrew Tridgell d36989f6a1 AP_HAL: fixed example build 2014-03-19 12:14:06 +09:00
Andrew Tridgell d3d71d597c AP_Baro: fixed example build 2014-03-19 12:14:05 +09:00
Andrew Tridgell dbd8f4b735 AP_Airspeed: fixed example build 2014-03-19 12:14:03 +09:00
Andrew Tridgell afab8a9c5b AP_AHRS: fixed example build 2014-03-19 12:14:02 +09:00
Andrew Tridgell 04587efb2d AC_WPNav: fixed example build 2014-03-19 12:14:00 +09:00
Andrew Tridgell 1e9dcba3da AC_Sprayer: fixed example build 2014-03-19 12:13:59 +09:00
Andrew Tridgell 4507c0fc4c AC_Fence: fixed example build 2014-03-19 12:13:57 +09:00
Andrew Tridgell 73ae38eaf0 AC_AttitudeControl: fixed example build 2014-03-19 12:13:56 +09:00
Andrew Tridgell 23e296dd00 GCS_Console: fixed example build 2014-03-19 12:13:55 +09:00
Andrew Tridgell 5f85792224 DataFlash: fixed example build 2014-03-19 12:13:53 +09:00
Andrew Tridgell 2a199c4f03 AP_Notify: fixed example build 2014-03-19 12:13:51 +09:00
Andrew Tridgell 6eece3a278 AP_Mount: fixed example build 2014-03-19 12:13:50 +09:00
Andrew Tridgell acd54d0826 AP_Math: fixed example build 2014-03-19 12:13:48 +09:00
Andrew Tridgell 731f980327 AP_InertialSensor: fixed example build 2014-03-19 12:13:47 +09:00
Andrew Tridgell 965f6bd3bd GCS_MAVLink: make DataFlash a pointer 
handle sketches where DataFlash is not available
 2014-03-19 12:13:37 +09:00
Andrew Tridgell b85c5123b2 GCS_MAVLink: added save parameter to handle_request_data_stream() 
this allows copter to not save stream rate changes
 2014-03-19 12:13:35 +09:00
Andrew Tridgell 79bb14b8c1 GCS_MAVLink: moved RADIO_STATUS handling into common code 2014-03-19 12:13:34 +09:00
Andrew Tridgell 144217ac74 GCS_MAVLink: moved parameter and stream handling into common code 
this keeps it in common between vehicles, and saves stack space
 2014-03-19 12:13:32 +09:00
Andrew Tridgell 06c578eb34 GCS_MAVLink: re-generate MAVLink headers 2014-03-19 12:13:31 +09:00
Andrew Tridgell 0b811ba6a9 GCS_MAVLink: added have_flow_control() method 
can be used to change speed of handling some protocol methods, as we
know communication will be reliable
 2014-03-19 12:13:25 +09:00
Randy Mackay c462adf2ee GCS_MAVLink: added five handle_mission methods 
The five methods moved from the vehicle specific code are
handle_mission_request_list, set_current, count, clear_all and
write_partial_list
 2014-03-19 12:13:19 +09:00
Randy Mackay 3938fb7255 GCS_MAVLink: loiter direction removed 
This is now handled in Mission library
 2014-03-19 12:13:18 +09:00
Randy Mackay 37cff752c8 Mission: handle Loiter direction 
loiter-unlimited, loiter-turns and loiter-time cms specify the turn
direction in Param3.  This is stored in the location's loiter_ccw flag.
Previously supported only in Plane, moving here allows us to share more
code with Plane, Copter, Rover.
 2014-03-19 12:13:16 +09:00
Andrew Tridgell add2416dbe GCS_MAVLink: added handle_mission_request() common function 
this handles requests for mission items, using stack saving

Pair-Programmed-With: Randy Mackay <rmackay9@yahoo.com>
 2014-03-19 12:13:10 +09:00
Andrew Tridgell ce29bbe394 GCS_MAVLink: save some memory in log download 
use an existing buffer instead of using the mavlink _send()
function. This saves some stack space in log download

Pair-Programmed-With: Randy Mackay <rmackay9@yahoo.com>
 2014-03-19 12:13:09 +09:00
Randy Mackay c75560218d Mission: command specific structures 2014-03-19 12:12:51 +09:00
Randy Mackay 865a4de33d Common: use PACKED instead of pragma pack for Location 2014-03-19 12:12:49 +09:00
Randy Mackay 869f325c66 DataFlash: Log_Write_MavCmd replaces Log_Write_Cmd 2014-03-19 12:12:43 +09:00
Andrew Tridgell 3a6698f54b AP_Mission: fixed typo 2014-03-19 12:12:42 +09:00
Andrew Tridgell 3538621c48 AP_Mission: doc updates 2014-03-19 12:12:40 +09:00
Randy Mackay 48329c1bba Mission: bug fix for loading consecutive do-cmds 
The verify step was not being run for the 2nd consecutive do-command in
a mission list
 2014-03-19 12:12:37 +09:00
Randy Mackay ece02b0c9a Mission: get_prev_nav_cmd returns int16 2014-03-19 12:12:34 +09:00
Randy Mackay 266a1ce9af Mission: bug fix set_current_cmd 
If mission had completed desired command index was ignored
 2014-03-19 12:12:27 +09:00
Andrew Tridgell 107cc2c126 AP_Mission: added truncate() function 
Used when loading a mission while flying

Pair-Programmed-With: Randy Mackay <rmackay9@yahoo.com>
 2014-03-19 12:12:21 +09:00
Andrew Tridgell acdaf561c8 AP_Mission: fixed typo 2014-03-19 12:12:15 +09:00
Randy Mackay ebf72f5beb Dataflash: example sketch includes AP_Mission.h 2014-03-19 12:12:10 +09:00
Randy Mackay 150faafaf4 Dataflash: add Log_Write_Cmd method 2014-03-19 12:12:07 +09:00
Randy Mackay 8e117d29eb Mission: test exceeding command storage size 2014-03-19 12:11:55 +09:00
Randy Mackay 9e07070d86 Mission: pass eeprom start into constructor 
This allows different storage locations for ArduCopter, Plane and Rover
 2014-03-19 12:11:53 +09:00
Randy Mackay 7663c5898e AP_HAL_Boards: board specific storage size definition 2014-03-19 12:11:52 +09:00
Randy Mackay ddc4cd4f18 Mission: add init and check_eeprom_version methods 2014-03-19 12:11:46 +09:00
Randy Mackay 4c0a31a9dc Mission: init home to zero before writing to eeprom 2014-03-19 12:11:37 +09:00
Randy Mackay df339c05fc Mission: num_commands returns uint16 2014-03-19 12:11:25 +09:00
Randy Mackay af186fba05 AP_Common: pack Location structure 
This resolves issues storing and retrieving Location to eeprom as part
of AP_Mission
 2014-03-19 12:11:13 +09:00
Randy Mackay e60865b715 Mission: example sketch test for set_current_cmd 2014-03-19 12:11:12 +09:00
Randy Mackay 512b378c4a Mission: allow set_current_cmd when mission is not running 
Can now be run when mission is complete or stopped.  When mission is
resumed it will begin at the set command.  This command can be either a
nav or do command
 2014-03-19 12:11:10 +09:00
Andrew Tridgell eaf34bba9a AP_Mission: fixed reset using set mission item to 0 
this causes a mission reset
 2014-03-19 12:11:07 +09:00
Randy Mackay 8dd301b0c2 Mission: set_current_cmd to use uint16 2014-03-19 12:11:06 +09:00
Randy Mackay a6e422333e Mission: remove alt_in_cm from mavlink to cmd conversion 2014-03-19 12:11:01 +09:00
Randy Mackay efd4058e8b AHRS: interate move of p1 from Location to mission cmd 2014-03-19 12:10:51 +09:00
Randy Mackay 5dd86bd7d7 Mission: update example sketch for p1's move to cmd structure 2014-03-19 12:10:49 +09:00
Randy Mackay 87126c9b71 Common: remove id and p1 from Location structure 
id and p1 are now part of AP_Mission's Mission_Command structure
 2014-03-19 12:10:46 +09:00
Randy Mackay 0dc3c9ab42 Mission: add p1 to command structure 
mavlink_to_mission_cmd method extended to support plane including adding
parameter to allow the alt to be expressed in cm or meters
 2014-03-19 12:10:45 +09:00
Randy Mackay 4c0ae63169 Mission: example sketch test replace_cmd method 2014-03-19 12:10:42 +09:00
Randy Mackay 61cc5e6b72 Mission: add replace_cmd method 2014-03-19 12:10:40 +09:00
Randy Mackay ef21e32fbc Mission: example sketch tests set current command 2014-03-19 12:10:37 +09:00
Randy Mackay 3cbbd4ebb9 Mission: add set current command method 2014-03-19 12:10:36 +09:00
Randy Mackay c7ffd2db90 Mission: reduce unnecessary search for do-commands 
do_cmd_all_done flag is set after all do-commands are complete
 2014-03-19 12:10:33 +09:00
Randy Mackay 0c92d60406 Mission: command index increase to int16 
Once more eeprom space is allocated this will allow more than 255
commands
 2014-03-19 12:10:31 +09:00
Randy Mackay 85b979ede9 Mission: support do-jump num_times is -1 
do-jump loops forever when num times is set to -1
 2014-03-19 12:10:29 +09:00
Randy Mackay c6c43847b6 Mission: example sketch tests set home command 2014-03-19 12:10:27 +09:00
Randy Mackay 9ef27955b5 Common: add location options masks 2014-03-19 12:10:20 +09:00
Randy Mackay cc8554fa2b Mission: fix example sketch 2014-03-19 12:10:18 +09:00
Randy Mackay f4d8ccc128 Mission: add mavlink to cmd conversion methods 2014-03-19 12:10:17 +09:00
Randy Mackay 87c7d19f83 AP_Mission: special handling for cmd 2014-03-19 12:10:14 +09:00
Randy Mackay e8db57ced3 AP_Mission: replace block read/write for eeprom 
Also reserve command #0 for home position
 2014-03-19 12:10:00 +09:00
Randy Mackay fd009d0704 AP_Mission: tests added to example sketch 2014-03-19 12:09:59 +09:00
Randy Mackay 84b3497a82 AP_Mission: fixes to protect against endless loops 2014-03-19 12:09:57 +09:00
Randy Mackay 6086bc14be AP_Mission: mostly working draft 2014-03-19 12:09:56 +09:00
Randy Mackay 4285eba297 AP_Mission: initial draft library 2014-03-19 12:09:54 +09:00
Randy Mackay dd45647626 AC_PosControl: update some comments re leash lengths 2014-03-17 10:13:02 +09:00
Holger Steinhaus 345115fddd AC_PosControl: fixed leash length calc for descent speed 2014-03-17 10:12:47 +09:00
Andrew Tridgell 6b5d27efbb AP_GPS: fixed example builds with change to init() 2014-03-16 06:44:50 +11:00
Andrew Tridgell 68462025ba RC_Channel: constrain norm_input() to -1 to 1 
if RC is not properly calibrated we could get a value beyond 1, which
could cause some flight modes to exceed the roll/pitch limits of the
aircraft
 2014-03-15 20:43:13 +11:00
Andrew Tridgell 9cf1fd46c8 AP_GPS: removed nav_setting default 
not needed, and apparently caused issue with xcode 5.1
 2014-03-14 07:49:56 +11:00
Paul Riseborough dacba5d911 AP_NavEKF : Update default tuning parameters (for plane use) 2014-03-14 06:07:58 +11:00
Paul Riseborough d0828d9c15 AP_NavEKF : Prevent bad user parameter causing incorrect GPS fusion 2014-03-14 06:07:58 +11:00
Paul Riseborough a24bfc1b8a AP_NavEKF : Use synthetic sideslip fusion during GPS denied operation with airspeed 2014-03-14 06:07:57 +11:00
Paul Riseborough 35811758d7 AP_NavEKF : Update comments and remove un-used function declarations 2014-03-14 06:07:57 +11:00
Andrew Tridgell db48ed9218 AP_Compass: fixed showing of is_external for 2nd compass 2014-03-13 16:26:43 +11:00
Andrew Tridgell beb6123576 GCS_MAVLink: send a "zero logs" message when no logs available 2014-03-11 17:12:22 +11:00
Andrew Tridgell ecdd74d580 DataFlash: return number of logs as zero correctly 
when we have no file based logs, report no logs :)
 2014-03-11 17:11:58 +11:00
Andrew Tridgell d9e8c34a89 GCS_MAVLink: allow for proxying of larger MAVLink messages on PX4 
this makes it possible to deal with large MAVLink messages
 2014-03-11 13:48:25 +11:00
Paul Riseborough 784034170d AP_NavEKF : increased useage of helper functions 2014-03-10 21:54:03 +11:00
Paul Riseborough 7b3130cfcc AP_NaVEKF : Enable operation without airspeed and compass 2014-03-10 21:53:09 +11:00
Paul Riseborough 3a5acb9cea AP_NavEKF : improved on-ground, in-air check and GPS yaw alignment 2014-03-10 14:07:34 +11:00
Paul Riseborough b47a11edf6 AP_NavEKF : improved static and on-ground mode selection logic 2014-03-10 04:39:59 +11:00
Paul Riseborough 15a44571c2 AP_NavEKF : enable operation without a compass for planes 2014-03-09 20:01:45 +11:00
Paul Riseborough 2019708056 AP_NavEKF : Make all compass use autodetect 2014-03-09 19:59:19 +11:00
Paul Riseborough e485b246e7 AP_NavEKF : update comments 2014-03-09 19:59:18 +11:00
Paul Riseborough c8bd415b00 AP_NavEKF : Add sideslip constraint to allow plane flight without magnetometer 2014-03-09 19:59:17 +11:00
Paul Riseborough 52fabc822f AP_NavEKF : Add low speed magnetometer calibration option 2014-03-09 19:59:16 +11:00
Paul Riseborough 88b0364fcd AP_TECS : Add protection for airspeed runaway due to pitch errors 2014-03-09 19:59:16 +11:00
priseborough 6ace31b6c1 AP_NavEKF : Fix bug that leaves height unconstrained in static mode 2014-03-09 19:27:21 +11:00
Mike McCauley c90d3ff59e Flymaple: RCOUtput disable_ch() now supports disabling outputs 2014-03-08 21:55:57 +11:00
Andrew Tridgell 794cc33e6a GPS: added set_secondary() function 
for preventing notify updates for 2nd GPS
 2014-03-08 21:47:49 +11:00
Paul Riseborough 94ff7522fc AP_NavEKF : Fix bug in initial East mag field state variance 2014-03-08 07:44:34 +11:00
Andrew Tridgell 63234d4c22 AP_Baro: fixed linux build of BMP085 driver 2014-03-07 09:33:43 +11:00
Randy Mackay 4cfe50b70c Notify: brighter RGB LED when on battery power 2014-03-05 21:38:29 +09:00
Randy Mackay 1c457d8448 Mount: add get_mode and set_mode_to_default methods 2014-03-05 16:01:11 +09:00
Andrew Tridgell dd502e98b4 RC_Channel: added support for separate wheel steering channels on planes 2014-03-05 12:57:50 +11:00
Andrew Tridgell a788405c8b RC_Channel: added percent_input() function 
useful for plane flaps
 2014-03-05 09:17:50 +11:00
Randy Mackay 25ee5d5dc8 AC_AttControl: smoothing_gain to angle_ef_roll_pitch_rate_ef_yaw_smooth 
pair-programmed with lthall
 2014-03-04 22:23:14 +09:00
lthall 15f88c2a2b AC_AttControl: Stabilize input shaping 2014-03-04 21:52:18 +09:00
Andrew Tridgell 5f85e7af6a HAL_PX4: switch to new serial port for 2nd GPS 2014-03-04 20:34:44 +11:00
Andrew Tridgell af2f72acb0 HAL_SITL: honor SIM_GPS2_ENABLE option 2014-03-03 07:07:29 +11:00
Andrew Tridgell 7a52938f68 SITL: added SIM_GPS2_ENABLE option 2014-03-03 07:07:09 +11:00
Mike McCauley be34e0358a RC_Channel: Removed duplicate defines from RC_Channel.h 2014-03-03 06:34:34 +11:00
Andrew Tridgell 449d09051e AP_NavEKF: cope with compass going offline while in flight 2014-03-02 14:32:10 +11:00
Andrew Tridgell 77f91e6250 AP_NavEKF: don't assume the number of gyros == number of accels 2014-03-02 13:53:19 +11:00
Paul Riseborough ebb3cc3348 AP_NavEKF : Use average of dual IMU gyro data when available 2014-03-02 13:28:44 +11:00
Paul Riseborough a39d00fc13 AP_NavEKF : Fix bug that prevents Zacc bias state variance being updated 2014-03-02 13:27:22 +11:00
Paul Riseborough 573b3210dd AP_NavEKF : Add div0 protection to the IMU1_weighting calc 2014-03-02 08:10:06 +11:00
Paul Riseborough bd152d332c AP_NavEKF : Add accel aliasing protection 2014-03-02 08:10:04 +11:00
Andrew Tridgell 853271dd37 Replay: moved replay tool into Tools/Replay 2014-03-01 14:30:55 +11:00
Andrew Tridgell 295cd9adba AP_NavEKF: give a sensible error for no such file on replay 2014-03-01 14:24:51 +11:00
Paul Riseborough 854f013146 AP_NavEKF : Fixes zero compass offsets on initialisation 2014-02-28 19:43:12 +11:00
Andrew Tridgell cc4c443b32 SITL: simulate dual accel/gyro 2014-02-28 17:30:38 +11:00
Jonathan Challinger e81d2e9584 AP_InertialSensor: Correct out-of-bounds array access that was causing SITL to crash 2014-02-28 17:25:54 +11:00
Andrew Tridgell 736201689b AP_NavEKF: only use the active accel from DCM if fly_forward is set 2014-02-27 17:40:13 +11:00
Andrew Tridgell aaaae9a222 AP_AHRS: added get_fly_forward() method 
will be used to detect a copter
 2014-02-27 17:39:49 +11:00
Paul Riseborough 62eff63267 AP_NavEKF : Increase the tuning range for magnetometer measurement noise 2014-02-27 17:20:38 +11:00
Andrew Tridgell 9a5ecc9541 AP_AHRS: use primary accel for accel_ef 
Logs from Randy show that the copter INav code can't handle the
accelerometer sensor changing.
 2014-02-27 16:28:37 +11:00
Andrew Tridgell 2c85a7ba56 AP_InertialSensor: expose get_primary_accel() for use in AHRS 2014-02-27 16:27:46 +11:00
Andrew Tridgell cf148fa76c AP_Compass: improved COMPASS_ORIENT and COMPASS_EXTERNAL for Pixhawk 2014-02-27 12:46:27 +11:00
Andrew Tridgell a9e683dada AP_NavEKF: use the accelerometer chosen by DCM for each step 2014-02-27 09:41:48 +11:00
Andrew Tridgell b53496d470 AP_AHRS: choose the best accelerometer at each drift correction step 
this greatly reduces the impact of aliasing on accelerometers by
choosing the accelerometer that produces the smallest error term in
DCM. The difference can be quite dramatic on the Pixhawk.
 2014-02-27 09:41:28 +11:00
Andrew Tridgell 0b45d2bc06 AP_AHRS: removed the AHRS_GPS_DELAY parameter 
the best value has turned out to be 1, and tweaking it has not turned
out to be useful, so this simplifies the code in preparation for
adding the anti-aliasing handling with multiple accelerometers
 2014-02-27 08:57:44 +11:00
Paul Riseborough 78a1cac560 AP_NavEKF : Improved heading and magnetic field state initialisation 2014-02-27 08:12:10 +11:00
Paul Riseborough d83b382e59 AP_NavEKF : Fix variance constraint bug 
Constraining variances to a minimum value of 1e-9 was causing problems
with gyro bias and angular accuracy in noisy GPS environments.
Because the constraint is applied after every covariance prediction
and correction, a lower value of 0 is more appropriate.
 2014-02-27 08:12:03 +11:00
Andrew Tridgell 8b59e564ba AP_NavEKF: improved replay timing 2014-02-27 08:11:04 +11:00
Andrew Tridgell 840f1b9a1e AP_InertialSensor: make HIL timing more accurate 
needed for 400Hz replay
 2014-02-27 08:10:42 +11:00
Andrew Tridgell 66f238c0da AP_NavEKF: support 400Hz replay from 50Hz logs 2014-02-26 19:34:01 +11:00
Andrew Tridgell 3fa2207a2d AP_HAL: allow for microsecond resolution in scheduler->stop_clock() 
this makes 400Hz in the replay code possible
 2014-02-26 19:33:39 +11:00
Andrew Tridgell 6fc5c12f1d AP_AHRS: remove unused variable 2014-02-26 10:28:12 +11:00
Andrew Tridgell 866e32f059 AP_Motors: removed unused variable 2014-02-26 09:40:39 +11:00
Andrew Tridgell e410733682 DataFlash: added GPS2 logging 2014-02-26 09:19:00 +11:00
Andrew Tridgell 0115b9fa07 HAL_SITL: support a 2nd GPS 2014-02-26 08:19:47 +11:00
Andrew Tridgell 836f473db2 HAL_FLYMAPLE: no uartE 2014-02-26 08:19:20 +11:00
Andrew Tridgell 58d5454d65 HAL_Empty: no uartE 2014-02-26 08:19:18 +11:00
Andrew Tridgell 6c74ca58c3 HAL_AVR: no uartE 2014-02-26 08:19:15 +11:00
Andrew Tridgell 4cb61f1f08 AP_HAL: support uartE 2014-02-26 08:18:20 +11:00
Andrew Tridgell bf2dd141e9 HAL_PX4: support uartE for 2nd GPS 2014-02-26 08:18:11 +11:00
Andrew Tridgell 63874dfffd AP_NavEKF: set fix type in GPS replay 2014-02-25 21:10:49 +11:00
Andrew Tridgell d7b2a09919 AP_GPS: added fix type to setHIL 2014-02-25 21:10:30 +11:00
Andrew Tridgell 09cce5d24e AP_NavEKF: fixed replay with current copter logs 2014-02-25 20:56:53 +11:00
Jonathan Challinger f321a5f241 AP_AHRS: Change airspeed_estimate to const in children of AP_AHRS 
Allows roll/pitch controllers to use DCM's airspeed estimate. Thanks to Kevin Hester for assistance in finding this.
 2014-02-25 18:49:16 +11:00
Paul Riseborough 72a91ccbca AP_NavEKF : Prevents aliasing triggering innovation consistency check failures 2014-02-25 15:55:44 +11:00
Andrew Tridgell 7a6f671659 AP_GPS: added have_vertical_velocity() function 
for use by EKF
 2014-02-24 18:24:10 +11:00
Andrew Tridgell a273951f70 HAL_Linux: added missing Util.cpp 2014-02-24 11:59:24 +11:00
Paul Riseborough 5db9a87d31 AP_NavEKF : fixed bug in velocity rate of change filter 
This bug meant the velocity rate of change used to scale the GPS measurement variances was noisy and too small
 2014-02-23 19:50:37 +11:00
Paul Riseborough 01c84c3f47 AP_NavEKF : fixed bug in height limit range 2014-02-23 19:50:36 +11:00
Paul Riseborough 36d619ec3a AP_NavEKF : Changed default IMU bias process noise to use smallest value 2014-02-23 19:50:36 +11:00
Paul Riseborough 89e0b48320 AP_NavEKF : Bug fix for height drift due to timer wrap-around 2014-02-23 19:50:35 +11:00
Paul Riseborough 939a32a7bb AP_NavEKF : Improved stability of Z accel bias 2014-02-23 19:50:34 +11:00
Paul Riseborough 9f3c19c03a AP_AHRS : change initialisation requirements for EKF and use dynamic method 2014-02-23 19:50:34 +11:00
Andrew Tridgell 6732d6c79b AP_InertialSensor: enable get_accel_count() and get_gyro_count() APIs for HIL 2014-02-23 19:10:07 +11:00
Andrew Tridgell 5d7346b5c2 HAL_SITL: fixed build with new HIL INS API 2014-02-23 19:09:41 +11:00
Andrew Tridgell ffbd655ba0 AP_NavEKF: support dual sensors in log replay, and fix flight altitude 2014-02-23 08:17:55 +11:00
Andrew Tridgell 707cc2b532 AP_NavEKF: allow log filename to be specified in replay 2014-02-23 08:17:01 +11:00
Andrew Tridgell 0e18079c47 AP_InertialSensor: allow HIL sensors to support multiple instances 
this allows log replay to test both sets of sensors on a Pixhawk log
 2014-02-23 08:16:33 +11:00
Andrew Tridgell 735c6449a1 AP_HAL: added support for commandline arguments 
useful for log replay, specifying log file
 2014-02-23 08:15:39 +11:00
Andrew Tridgell 4e56196655 AP_NavEKF: allow states to be accessed using names as well as a Vector22 2014-02-21 20:24:47 +11:00
Andrew Tridgell 009913ec60 AP_Math: make is_nan const for quaternion and add .zero() for vector2 2014-02-21 20:24:47 +11:00
Randy Mackay 33fe778cdd InertialSensor_PX4: resolve compiler warning 2014-02-21 13:53:34 +09:00
Randy Mackay 98bdbb7fed AC_WPNav: set loiter accel to 1/2 of speed 
Bug fix from Leonard.
Also fixed some formatting.
 2014-02-20 21:37:45 +09:00
Andrew Tridgell f222f2ef1e DataFlash: fixed logging on PX4v1 
large writes break IO, a NuttX bug
 2014-02-20 06:55:35 +11:00
Andrew Tridgell 20b0444c15 AP_NavEKF: remove sleep on init of EKF 
this prevents HIL from locking up, and also prevents a possible 1s
delay in flight on EKF init
 2014-02-19 22:04:12 +11:00
Andrew Tridgell b434c11215 AP_AHRS: removed empty file 2014-02-19 22:00:25 +11:00
Randy Mackay aa5ea23245 GCS_MAVLink: regenerate for COMPASSMOT_STATUS msg 2014-02-19 16:04:08 +11:00
Randy Mackay a7c25ec649 GCS_MALink: improved generate.sh failure msg 2014-02-19 16:04:05 +11:00
Andrew Tridgell 50cbc661ef GCS_MAVLink: added new COMPASSMOT_STATUS message 2014-02-19 16:03:57 +11:00
Andrew Tridgell c9d0c1face AP_NavEKF: use ahrs->get_armed() for static mode demanded 2014-02-19 10:52:57 +11:00
Andrew Tridgell 3b1f9a4bbf AP_AHRS: added get_armed() and set_armed() calls 
will be used by NavEKF to determine static mode
 2014-02-19 10:52:24 +11:00
Andrew Tridgell fe0cb23733 AP_InertialSensor: fixed HIL for 400Hz INS 2014-02-19 10:29:00 +11:00
Andrew Tridgell 536160a3fb AP_NavEKF: use AHRS get_correct_centrifugal() 2014-02-19 10:28:45 +11:00
Andrew Tridgell fad0b2b233 AP_AHRS: added get_correct_centrifugal() 
used by NavEKF to force static mode
 2014-02-19 10:28:14 +11:00
Andrew Tridgell 599c3a8abf AP_Math: added more operators to VectorN 2014-02-19 10:14:58 +11:00
Andrew Tridgell 869e41fd03 AP_NavEKF: fixed detection of airspeed sensor 
the get_airspeed() AHRS call can change as the user enables/disables
the airspeed sensor, plus it only gets enabled after the NavEKF
constructor runs.
 2014-02-19 09:22:45 +11:00
Paul Riseborough 1ade39977a AP_NavEKF : covariance prediction cleanup 2014-02-19 09:22:45 +11:00
Paul Riseborough 8daca145d0 AP_NavEKF : useAirspeed set automatically 2014-02-19 09:22:45 +11:00
Paul Riseborough 6fbada26d3 AP_NavEKF : Improvements to staticMode robustness 2014-02-19 09:22:45 +11:00
Mike McCauley bd768a0c0c AP_HAL_FLYMAPLE RCOutput.cpp: enable_ch no longer resets servo 
FLYMAPLERCOutput::enable_ch incorrectly reset the servo to 0, which caused
servo twitching once per second when RC_Channel_aux::enable_aux_servos
enabled each channel.
 2014-02-18 09:25:08 +11:00
Andrew Tridgell ad4db4de6c AP_Airspeed: added setHIL() method 
useful for log playback
 2014-02-18 09:25:08 +11:00
Andrew Tridgell e11ada7bf0 RC_Channel: fixed comment on enable_aux_servos() 
thanks to Mike McCauley for spotting
 2014-02-18 09:25:07 +11:00
Andrew Tridgell b2bd81f262 AP_Baro: added alternative setHIL interface 
uses pressure and temperature for better log replay
 2014-02-18 09:25:07 +11:00
Andrew Tridgell 5bf170c440 AP_NavEKF: fixed log replay code 
also added BARO and ARSP messages
 2014-02-18 09:25:07 +11:00
jschall 024855014f AC_PosControl: update _pos_error if it is being limited 
This fixes a bug that causes 10hz throttle noise.
 2014-02-17 22:33:06 +09:00
Andrew Tridgell 9cf70fe3f7 AP_HAL: another broken example build 
this one an internal compiler error
 2014-02-17 12:42:13 +11:00
Mike McCauley 4f9f87a8c6 AP_HAL_FLYMAPLE: Add notes to FlymaplePortingNotes.txt re GPS selection. 2014-02-17 05:56:37 +11:00
Mike McCauley 54a0b04c12 AP_HAL_FLYMAPLE: RCInput detects stale input readings better. Update test 
code.
 2014-02-17 05:56:37 +11:00
Mike McCauley f1533aa350 AP_HAL_FLYAPLE: update documentation in FlymaplePortingNotes.txt 2014-02-17 05:56:37 +11:00
Mike McCauley 81791bdc43 AP_HAL_FLYMAPLE: Added documentation about alternative orientations to FlymaplePortingNotes.txt 2014-02-17 05:56:37 +11:00
Mike McCauley 95bea052d2 AP_HAL_FLYMAPLE: update documentation in FlymaplePortingNotes.txt 2014-02-17 05:56:37 +11:00
Mike McCauley 2c94a40310 AP_InertialSensor: AP_InertialSensor_Flymaple Remove unnecessary 
comment
 2014-02-17 05:56:37 +11:00
Mike McCauley dd6abb49a9 AP_InertialSensor: AP_InertialSensor_Flymaple::healthy() was required after 
all.
 2014-02-17 05:56:37 +11:00
Mike McCauley 0a43cf8c5c AP_InertialSensor: AP_InertialSensor_Flymaple removed redundant definition of 
healthy().
 2014-02-17 05:56:37 +11:00
Mike McCauley f7279aa13f AP_InertialSensor: AP_InertialSensor_Flymaple implement get_gyro_health 
and get_accel_health.
 2014-02-17 05:56:37 +11:00
Mike McCauley 4dc33c8de8 AP_HAL_FLYMAPLE: updated FlymaplePortingNotes.txt 2014-02-17 05:56:37 +11:00
Randy Mackay d277b6cabd AC_AttControl: fix @Units parameter descriptions 2014-02-16 22:36:59 +09:00
Paul Riseborough 7a82746fcc AP_NavEKF : fixed bug in pos and vel reset when in static mode 2014-02-16 22:35:19 +11:00
Paul Riseborough 275ef86f86 AP_NavEKF : Position and Velocity reset bugfix 2014-02-16 21:05:37 +11:00
Paul Riseborough b22dc706b2 AP_NavEKF : staticMode bugfix and robustness improvements 2014-02-16 21:04:55 +11:00
Paul Riseborough 2926602718 AP_NavEKF : Cleaned up InitialiseFilterDynamic 2014-02-16 21:04:51 +11:00
Paul Riseborough 404fbafe26 AP_NavEKF : Changed timout behaviour to only reset PosVel states 2014-02-16 21:04:46 +11:00
Andrew Tridgell 856dfd0ee6 AC_AttitudeControl: fixed example build 2014-02-16 18:43:15 +11:00
Andrew Tridgell ee37bc3d27 AP_AHRS: ensure we have HAL_CPU_CLASS available 2014-02-16 17:57:09 +11:00
Randy Mackay 6af705d455 AC_Circle: bug fix for pos target when radius is zero 2014-02-16 13:46:38 +11:00
Randy Mackay 9130c88f15 AC_PosControl: throttle rate to simple P controller 2014-02-16 13:35:44 +11:00
Randy Mackay a021d0ca31 AHRS: fix compiler warning 2014-02-16 13:35:37 +11:00
Randy Mackay 34b62fc078 AC_AttControlHeli: add ACCEL_RP_MAX, ACCEL_Y_MAX 2014-02-16 13:35:26 +11:00
lthall b8d9bdb794 AC_AttControl: accel limit for roll, pitch yaw rates 2014-02-16 13:35:23 +11:00
Andrew Tridgell 189d635493 AP_Compass: constrain compass offsets to +/- 2000 
this is prompted by a user log showing NaN compass offsets, resulting
in a crash. The patch ensures we never end up with NaN offsets, and
also constrains the offsets to a reasonable limit
 2014-02-16 13:33:41 +11:00
Andrew Tridgell 6618bdae67 DataFlash: periodically use lseek to avoid NuttX seek bug 2014-02-16 13:21:35 +11:00
Andrew Tridgell 9bb8f73d56 Compass: split compass learning out to its own C++ file 2014-02-16 13:21:06 +11:00
Andrew Tridgell 24e1070eb2 AP_NavEKF: initialise quaternion from rotation matrix 2014-02-15 12:21:11 +11:00
Andrew Tridgell 2df314799e AP_Math: added tests for quaternion to/from rotation matrix 2014-02-15 12:20:51 +11:00
Andrew Tridgell 689f230d40 AP_Math: added quaternion.from_rotation_matrix() 2014-02-15 12:20:31 +11:00
Andrew Tridgell c6b24c521b AP_NavEKF: force healthy false when initialising 
this prevents us feeding off our own values when booting

Pair-Programmed-With: Paul Riseborough <p_riseborough@live.com.au>
 2014-02-15 09:25:40 +11:00
Andrew Tridgell be33a9634e AP_AHRS: move using_EKF to .cpp to make it easier in gdb 2014-02-15 09:25:40 +11:00
Andrew Tridgell eedd88c2ec AP_AHRS: give zero lat/lng and baro alt if no position yet in DCM 2014-02-15 09:25:40 +11:00
Andrew Tridgell 4d3f714a5d AP_Notify: fixed example build 2014-02-15 06:40:39 +11:00
Andrew Tridgell 830afefcef AP_HAL: fixed example build 2014-02-15 06:40:29 +11:00
Andrew Tridgell 3af38a778d AP_Baro: fixed example build 2014-02-15 06:40:15 +11:00
Andrew Tridgell 8201f9c928 AP_NavEKF: don't build example 2014-02-15 06:40:06 +11:00
Andrew Tridgell c1dff6aa65 AP_Math: fixed example build 2014-02-15 06:39:43 +11:00
Andrew Tridgell f9d0747750 AP_InertialSensor: fixed example build 2014-02-15 06:39:35 +11:00
Randy Mackay 5bdc564191 AP_AHRS: fix example sketch 2014-02-15 06:09:08 +11:00
Randy Mackay c18b3f6094 AP_Airspeed: fix example sketch 2014-02-15 06:09:08 +11:00
Randy Mackay bb715424ee Baro: fix BMP085 example sketch 2014-02-15 06:09:08 +11:00
Randy Mackay d761ddd4af AP_Motors: fix example sketch 2014-02-15 06:09:08 +11:00
Randy Mackay ae59bef6d1 AC_INav: fix example sketch 2014-02-15 06:09:08 +11:00
Randy Mackay 42d9225fbe HAL_AVR: ArduCopterLibs to use AC_P library 2014-02-15 06:09:08 +11:00
Randy Mackay bf3effcd10 AC_WPNav: fix example sketch 2014-02-15 06:09:08 +11:00
Randy Mackay 889ee1bfef AC_Sprayer: fix example sketch 2014-02-15 06:09:08 +11:00
Randy Mackay 4484a4232a AC_Fence: fix example sketch 2014-02-15 06:09:08 +11:00
Randy Mackay c35bd84e21 AC_AttControl: fix example sketch 2014-02-15 06:09:08 +11:00
Randy Mackay 451910fc94 AC_AttControlHeli: replace APM_PI with AC_P 2014-02-15 06:09:08 +11:00
Randy Mackay ff9f4fe6e7 AC_AttControl: replace APM_PI with AC_P 2014-02-15 06:09:08 +11:00
Randy Mackay 94fb9c4274 AC_PosControl: replace APM_PI with AC_P 2014-02-15 06:09:08 +11:00
Randy Mackay fbf8106280 AC_Circle: remove AC_PID include 
This is no longer required with introduction of PosControl lib
 2014-02-15 06:09:08 +11:00
Randy Mackay e86a21a254 AC_WPNav: remove AC_PID include 
This is no longer required with introduction of PosControl lib
 2014-02-15 06:09:08 +11:00
Randy Mackay 8fae75ee87 AC_PID: add AC_P controller 
Used for stabilize angle controllers, alt hold and loiter
 2014-02-15 06:09:08 +11:00
Randy Mackay fbc5af2705 AC_PID: results returned as float 2014-02-15 06:09:08 +11:00
Randy Mackay a6ad51b38f AC_AttControl: rename most methods 2014-02-15 06:09:08 +11:00
lthall 65c2fc0cc6 AC_AttControl: ACRO fixes 2014-02-15 06:09:08 +11:00
Andrew Tridgell 0bbe038587 GCS_MAVLink: re-generate MAVLink headers 2014-02-15 05:48:24 +11:00
Andrew Tridgell 801ceacaf2 AP_AHRS: re-run update_trig() after EKF AHRS update 2014-02-15 05:48:24 +11:00
Andrew Tridgell a88212eb7a AP_InertialNav: fixed EKF version for new AHRS API 2014-02-15 05:48:24 +11:00
Andrew Tridgell a7a44a9a5c AP_NavEKF: fixed init order warning 2014-02-15 05:48:24 +11:00
Andrew Tridgell 9b8311580b AP_TECS: update for AHRS API change 2014-02-15 05:48:24 +11:00
Andrew Tridgell 25ef0d5a7b AP_AHRS: don't allow get_velocity_NED() and get_relative_position_NED() without EKF 
this avoids some linking issues, plus the functions are inaccurate
without EKF
 2014-02-15 05:48:24 +11:00
Andrew Tridgell 6964529124 AP_Baro: _calculate can be private 2014-02-15 05:48:24 +11:00
Andrew Tridgell c62ccce9d8 AP_AHRS: make estimate_wind() public 
this avoids it linking into copter
 2014-02-15 05:48:24 +11:00
Paul Riseborough b56c8211c9 AP_NavEKF: Reduced number of Mavlink tuneable parameters 2014-02-15 05:48:23 +11:00
Paul Riseborough c20fac1269 AP_NavEKF: Updated comments for private functions 2014-02-15 05:48:23 +11:00
Paul Riseborough deb64c4cbd AP_NavEKF: Pos Vel reset after long GPS timeout 2014-02-15 05:48:23 +11:00
Paul Riseborough 7ac0172db1 AP_NavEKF: removed repeated intialisation 2014-02-15 05:48:23 +11:00
Paul Riseborough 28fb5e364b AP_NavEKF: Fixed bug in pos/vel/hgt reset on timout 2014-02-15 05:48:23 +11:00
Paul Riseborough f74cce8b4e AP_NavEKF : Removed double to float conversions 2014-02-15 05:48:23 +11:00
Paul Riseborough 80f6dba694 AP_NavEKF: Improved control of fusion update intervals 2014-02-15 05:48:23 +11:00
Paul Riseborough 13b9daeff5 AP_NavEKF: Added constraints to Mavlink tuneable parameters 2014-02-15 05:48:23 +11:00
Paul Riseborough b123e1bb16 AP_NavEKF: Improved in-air reset behaviour 2014-02-15 05:48:22 +11:00
Paul Riseborough 1651980b9f AP_NavEKF: Improved behaviour following loss and regaining of GPS 2014-02-15 05:48:22 +11:00
Paul Riseborough 14eb63e7c9 AP_NavEKF: Made most tuning parameters Mavlink adustable 2014-02-15 05:48:22 +11:00
Andrew Tridgell f800f5592d AP_NavEKF: fixup parameter handling 2014-02-15 05:48:22 +11:00
Andrew Tridgell f09ae0c2d0 AP_AHRS: expose get_NavEKF as non-const 
better than having two methods
 2014-02-15 05:48:22 +11:00
Paul Riseborough f0f76920fa AP_NavEKF : Mavlink tunable parameter - first attempt 2014-02-15 05:48:22 +11:00
Paul Riseborough 128f71157d AP_NavEKF: Fixed bug in pre GPS fix updates 2014-02-15 05:48:22 +11:00
Paul Riseborough 08267cea87 AP_AHRS: Scheduling for yaw gain to reduce atitude errors in turning flight 2014-02-15 05:48:22 +11:00
Paul Riseborough 357743ee2d AP_NavEKF: Adjusted tuning parameters for plane use 2014-02-15 05:48:22 +11:00
Paul Riseborough b4171853b1 AP_NavEKF: allow initialisation before GPS lock to aid indoor testing 2014-02-15 05:48:21 +11:00
Paul Riseborough 7fb60812c2 AP_NavEKF: Added pitch and roll inertial sensor to body trim adjustment 2014-02-15 05:48:21 +11:00
Paul Riseborough 9d375da550 AP_NavEKF: changed sqrt to sqrtf 2014-02-15 05:48:21 +11:00
Paul Riseborough 1f0b4b02d0 AP_NavEKF: fixed merge error that inverted static mode 2014-02-15 05:48:21 +11:00
Paul Riseborough 17e24521e8 DataFlash : Added logging of NavEKF innovations and variances 2014-02-15 05:48:21 +11:00
Paul Riseborough 9bbddb2f66 AP_TECS : Use NavEKF height and height rate data if available 2014-02-15 05:48:21 +11:00
Paul Riseborough 0599817aa9 AP_AHRS : EKF initialisation changed to use bootstrap method 2014-02-15 05:48:21 +11:00
Paul Riseborough 401e3aee43 AP_NavEKF : Changes to test harness to support accel bias states 2014-02-15 05:48:21 +11:00
Paul Riseborough 5219869389 AP_NavEKF : Added Z accel bias state and bootstrap initialisation method 2014-02-15 05:48:21 +11:00
Randy Mackay 301a04b74a AP_NavEKF: update params for copter 2014-02-15 05:48:21 +11:00
Randy Mackay f068d0ff7e AP_AHRS_NavEKF: expose non-const EKF for tuning 2014-02-15 05:48:20 +11:00
Randy Mackay 7c73020015 AP_NavEKF: make params public so they can be tuned 2014-02-15 05:48:20 +11:00
Randy Mackay 9f130b40a0 AP_AHRS_NavEKF: override set_correct_centrifugal 2014-02-15 05:48:20 +11:00
Randy Mackay 8f6fd86f69 AP_AHRS: make set_correct_centrifugal virtual 2014-02-15 05:48:20 +11:00
Paul Riseborough a87df0ad56 AP_AHRS : set NavEKF staticMode using call to set_correct_centrigual 2014-02-15 05:48:20 +11:00
Paul Riseborough 5c3dea28dc AP_NavEKF : Enable staticMode to be set externally 2014-02-15 05:48:20 +11:00
Andrew Tridgell 3617c65af7 AP_InertialSensor: make HIL treat time like PX4 does 2014-02-15 05:48:20 +11:00
Andrew Tridgell 77c4968342 AP_NavEKF: enable plotting in plot2.dat too 2014-02-15 05:48:20 +11:00
Andrew Tridgell ab2a5a0672 AP_NavEKF: enable some debug 2014-02-15 05:48:20 +11:00
Paul Riseborough 0d4d287215 AP_NavEKF: comment and parameter tweaks for ground testing 2014-02-15 05:48:20 +11:00
Paul Riseborough b6b0c2a489 AP_NavEKF: fixed bug in flag reset for hgt fusion 2014-02-15 05:48:19 +11:00
Paul Riseborough 2f3b2a7111 AP_NavEKF: second attempt at higher rate baro fusion 2014-02-15 05:48:19 +11:00
Paul Riseborough cdbc5a3f35 AP_NavEKF: added position observations to static mode 2014-02-15 05:48:19 +11:00
Paul Riseborough da2c341914 Revert "AP_NavEKF: Modifed Vel Pos fusion to fuse height data whenever baro reading has changed" 
This reverts commit d1e1be192a0e7ab0771edc9f2c03547da25697cf.
 2014-02-15 05:48:19 +11:00
Paul Riseborough 32cc427ff4 AP_NavEKF: Modifed Vel Pos fusion to fuse height data whenever baro reading has changed 2014-02-15 05:48:19 +11:00
Paul Riseborough 2998aa1a6a AP_NavEKF: Amended tuning parameter list, and changed from variance to noise definitions 2014-02-15 05:48:19 +11:00
Paul Riseborough f9aae1b90b AP_NavEKF: fixed bug in variance constraint code 2014-02-15 05:48:19 +11:00
Paul Riseborough 735c9684da AP_NavEKF: removed error in constructor comments 2014-02-15 05:48:19 +11:00
Paul Riseborough 8f999fe787 AP_NavEKF: Misc tuning adjustments for Plane testing 2014-02-15 05:48:19 +11:00
Paul Riseborough c87a5aaf34 AP_NavEKF: added PositionReset public function to fix pre-arm loss of solution 2014-02-15 05:48:19 +11:00
Paul Riseborough fec4fd463c AP_NavEKF: reduced On Ground yaw gyro bias drift variance scaler 2014-02-15 05:48:19 +11:00
Paul Riseborough 619fffec3e AP_NavEKF: added static mode for pre-arm and bench testing 2014-02-15 05:48:18 +11:00
Paul Riseborough ab08a5c7d6 AP_AHRS : altered NavEKF set home to reset position instead of reset filter 2014-02-15 05:48:18 +11:00
Paul Riseborough d0831c708d AP_NavEKF : Added position and height reset public method 2014-02-15 05:48:18 +11:00
Andrew Tridgell 1b1f9e41ab AP_NavEKF: improved playback initialisation 2014-02-15 05:48:18 +11:00
Andrew Tridgell d9ef45234b AP_NavEKF: useful plotting function 2014-02-15 05:48:18 +11:00
Andrew Tridgell 0816642436 AP_NavEKF: handle intertial nav 2014-02-15 05:48:18 +11:00
Andrew Tridgell 77c6e3206a AP_NavEKF: some debug code 2014-02-15 05:48:18 +11:00
Andrew Tridgell 2cd781997f AP_Baro: changed HIL driver to use floats and better handle starup 2014-02-15 05:48:18 +11:00
Andrew Tridgell c995f994c5 AP_InertialNav: make some functions protected 2014-02-15 05:48:18 +11:00
Andrew Tridgell c33da7b3a2 AP_NavEKF: fixed log playback for copter 2014-02-15 05:48:18 +11:00
Andrew Tridgell 78ff078988 HAL_Linux: fixed stopped clock delay 2014-02-15 05:48:18 +11:00
Andrew Tridgell 9b53db66cb AP_NavEKF: tweak parameters based on randys copter log 2014-02-15 05:48:18 +11:00
Andrew Tridgell 9e3bf685c2 SITL: use sinf() and cosf() 
for some strange reason the double precision functions can crash
 2014-02-15 05:48:17 +11:00
Andrew Tridgell bb0eed5c14 SITL: prevent initialisation error 2014-02-15 05:48:17 +11:00
Andrew Tridgell 574946f0aa AP_AHRS: start EKF 5 seconds after getting GPS lock 2014-02-15 05:48:17 +11:00
Andrew Tridgell df271fbd59 AP_AHRS: fill in _dcm_matrix whenever EKF started 
this ensures get_dcm_matrix() always returns valid data
 2014-02-15 05:48:17 +11:00
Andrew Tridgell 4c42f53636 AP_NavEKF: use INS delta_time 2014-02-15 05:48:17 +11:00
Andrew Tridgell 5193ce90dc AP_NavEKF: copter specific dtIMUAvg 2014-02-15 05:48:17 +11:00
Andrew Tridgell ada7d4fb98 AP_AHRS: use the right DCM matrix when EKF not enabled 2014-02-15 05:48:17 +11:00
Andrew Tridgell a74fcc5a93 AP_AHRS: added set_ekf_use() 2014-02-15 05:48:17 +11:00
Andrew Tridgell 38ac8d404a SITL: fixed PX4 build 2014-02-15 05:48:17 +11:00
Andrew Tridgell fba0891617 SITL: fixed SIM df altitude 2014-02-15 05:48:17 +11:00
Paul Riseborough 8b1d056e07 AP_NavEKF: updated timeout for GPS retry and reduced onGround gyro bias noise multiplier 2014-02-15 05:48:16 +11:00
Paul Riseborough 7e026d41df AP_NavEKF: explicitly zeroed covariance matrix priro to setting initial values 2014-02-15 05:48:16 +11:00
Paul Riseborough 6e6e3d923e AP_NavEKF: improved covariance matrix numerical stability protection 2014-02-15 05:48:16 +11:00
Andrew Tridgell 45177df354 DataFlash: moved EKF logging to common code 2014-02-15 05:48:16 +11:00
Andrew Tridgell 9aea781248 GCS_MAVLink: moved send_ahrs2 to common code 2014-02-15 05:48:16 +11:00
Andrew Tridgell 66dbaa6657 AP_NavEKF: make health() API const 2014-02-15 05:48:16 +11:00
Andrew Tridgell 47f541e143 AP_InertialNav: implement InertialNav in terms of AHRS when available 2014-02-15 05:48:16 +11:00
Andrew Tridgell 5d43a1d704 AP_AHRS: added inertial nav interfaces to AHRS 2014-02-15 05:48:16 +11:00