yaapu
fed8ecc3b0
AP_Frsky_Telem: fix for protocol=4 GAlt=0 and GSPd=0
...
This fixes protocol 4 GPS altitude and speed error, both were reported as constant 0
for cal_gps_position() was never called
2020-03-31 13:09:35 +11:00
Peter Barker
a3e2e156e7
AP_HAL_Linux: do not create ConsoleDevices for Replay or examples
...
Uusally problems evidence themsleves with stdin not working correctly -
for example, "git add -p" skipping through all queries as if the
user was just pressing enter.
2020-03-31 11:22:21 +11:00
Andrew Tridgell
21e93dae34
GCS_MAVLink: send only old value for readonly param set
...
this prevents a condition where the GCS can display the wrong value if
the 2nd PARAM_VALUE is lost
Note that groundstations can tell the set failed due to readonly in
the following ways:
1) look for the statustext: Param write denied (PARAMNAME)
2) see that the value came back with the old value, with index of
65535
3) can repeat the send, looking for (1) and (2)
Michael has proposed we add a PARAM_VALUE mavlink2 flags
extension. That would be nice, but we should still make this change to
fix the issue with mavlink 1.0
2020-03-31 11:19:58 +11:00
Peter Barker
55d37e5d0e
GCS_MAVLink: correct slowing down of waypoint re-requests
...
These re-requests shouldn't be slowed down by a factor of 20.
This was a left-over from when we did these in terms of 20ms intervals
(50Hz loop rate)
2020-03-31 11:15:04 +11:00
Peter Barker
ca7fcc093c
GCS_MAVLink: correct return type on get_stream_slowdown_ms
...
Only used in one place. On slow links may have caused us to re-request
a waypoint too often. "Too often" is still >1s intervals.
2020-03-31 11:15:04 +11:00
Peter Barker
0b756547be
GCS_MAVLink: add stream_slowdown to MAV message
2020-03-31 11:13:11 +11:00
Peter Barker
be6ed0be9f
AP_Logger: add stream_slowdown to MAV message
2020-03-31 11:13:11 +11:00
Peter Barker
46a014b399
AP_Notify: remove recursive call to play in next_action
...
Infinite recursion is bad.
See https://github.com/ArduPilot/ardupilot/issues/13868
2020-03-31 11:06:30 +11:00
Peter Barker
7028f1adba
GCS_MAVLink: GCS_FTP: remove redundant more_pending variable
...
This is taken care of by the "break" statements
2020-03-31 10:38:13 +11:00
Peter Barker
a09ac895e9
GCS_MAVLink: remove dead assignment
...
This value is never used
2020-03-31 10:38:13 +11:00
Peter Barker
2b08af69bc
AP_GPS: fix dereference-of-nullptr warning from scan-build
...
This is kind-of a false positive as this in practise could never be
nullptr.
2020-03-31 10:37:16 +11:00
Michael du Breuil
18baf18041
GCS_MAVLink: Remove redundant assignment to the command
...
This is done internally by the conversion to mission_item_int_t
2020-03-31 10:35:49 +11:00
Peter Barker
609b66a053
AP_NavEKF3: rename struct log_NKF2a to log_XKF2
2020-03-31 10:25:59 +11:00
Peter Barker
8a28fa2244
AP_Logger: rename struct log_NKF2a to log_XKF2
2020-03-31 10:25:59 +11:00
Gone4Dirt
c97cc71382
AP_Camera: Correct trigger behaviour when cmd is switched off then on again
2020-03-31 10:05:40 +11:00
Gone4Dirt
d813ee27de
AP_Mission: Added immediate trigger for DO_SET_CAM_TRIGG_DIST
2020-03-31 10:05:40 +11:00
Randy Mackay
cca361a942
AP_VisualOdom: minor format and comment fixes
2020-03-30 20:31:38 +09:00
Randy Mackay
ecf5abc1f2
GCS_MAVLink: minor format fix
2020-03-30 20:20:08 +09:00
Randy Mackay
7a48a3f354
AP_Math: minor comment fix
2020-03-30 20:20:02 +09:00
Henry Wurzburg
a637073dad
AP_HAL_Chibios: add tenth PWM output to MatekF405-Wing
2020-03-30 11:23:14 +11:00
Peter Barker
aeb45bf146
AP_Logger: fix extremely unlikely nullptr dereference in SITL sanity checks
2020-03-29 08:07:29 +11:00
Michael du Breuil
75b133926f
AP_Scripting: Cleanups to remove false posive warnings
2020-03-28 21:16:09 +11:00
Michael du Breuil
d50e9865bd
AP_Scripting: Delete the lua object if we failed to allocate the required memory
2020-03-28 21:16:09 +11:00
Michael du Breuil
6753e99604
AP_Scripting: Add a return around luaL_error
...
This is the normal method of calling luaL_error which longjmp's away,
and it helps the static analysis tools realize that anything afterwards
will not be reached
2020-03-28 21:16:09 +11:00
Andrew Tridgell
e7fdf8fad1
GCS_MAVLink: reduced delay between ftp packets
2020-03-28 15:28:03 +11:00
Andrew Tridgell
5c9ae33151
GCS_MAVLink: support variable sized packets in burst read
...
this allows packet size to be tailored to the transport
2020-03-28 15:28:03 +11:00
Andrew Tridgell
8a84dbc19e
GCS_MAVLink: slow down telemetry during ftp
2020-03-28 15:28:03 +11:00
Andrew Tridgell
5047eb88e2
AP_Scripting: use @ROMFS
2020-03-28 15:28:03 +11:00
Andrew Tridgell
10c709a5a1
AP_Filesystem: use @ROMFS
2020-03-28 15:28:03 +11:00
Andrew Tridgell
a8f7212d79
AP_Filesystem: fixed open for write in ROMFS
2020-03-28 15:28:03 +11:00
Andrew Tridgell
e0957c2bcc
HAL_ChibiOS: include hwdef.dat in ROMFS
...
this allows download via ftp
2020-03-28 15:28:03 +11:00
Andrew Tridgell
c1d4a5bd35
GCS_MAVLINK: prevent closedir() with nullptr
2020-03-28 15:28:03 +11:00
Andrew Tridgell
8d1bf46dab
AP_Param: use smaller param area for all 1M flash boards
2020-03-28 15:28:03 +11:00
Andrew Tridgell
ebec738b88
AP_Scripting: enable lua scripts in ROMFS
2020-03-28 15:28:03 +11:00
Andrew Tridgell
ea57b7b3cd
HAL_ChibiOS: embed ROMFS files from hwdef directory
...
this allows for a scripts/ directory under hwdef board directory to
embed lua scripts
2020-03-28 15:28:03 +11:00
Andrew Tridgell
28082774b6
GCS_MAVLink: use new DirHandle for directory listings
2020-03-28 15:28:03 +11:00
Andrew Tridgell
a91c587ef3
AP_Scripting: use new DirHandle for directory listings
2020-03-28 15:28:03 +11:00
Andrew Tridgell
b5cc1f236a
AP_Logger: use new DirHandle for directory listings
2020-03-28 15:28:03 +11:00
Andrew Tridgell
6583f7c13e
AP_Filesystem: added VFS system for multiple backends
2020-03-28 15:28:03 +11:00
Andrew Tridgell
98542d0c0b
AP_ROMFS: added directory listing interface
2020-03-28 15:28:03 +11:00
Andrew Tridgell
6360c67858
AP_OSD: avoid build when OSD disabled
2020-03-28 15:28:03 +11:00
Andrew Tridgell
822460ce7d
HAL_ChibiOS: fixed strdup() on ChibiOS
2020-03-28 15:28:03 +11:00
Peter Barker
051a7dc298
AP_NavEKF: add onboard LogMessage documentation
2020-03-27 08:05:53 +11:00
Peter Barker
7f0e722a33
AP_Logger: add onboard LogMessage documentation
2020-03-27 08:05:53 +11:00
Andrew Tridgell
6d42e9502b
AP_Compass: fixed unreg compass check for AP_Periph
...
this fixes detection of compasses on peripherals where
COMPASS_MAX_UNREG_DEV is 0
2020-03-26 18:10:13 +11:00
Daniel Magree
b3ff81648b
Nav_EKF3: varInnovBodyVel assigned the innovation covariance, rather than inverse
2020-03-25 21:52:49 +11:00
Andrew Tridgell
0f6f684bab
AP_Airspeed: expose get_corrected_pressure()
...
needed for AP_Periph
2020-03-25 20:37:00 +11:00
Henry Wurzburg
c34c857123
AP_Logger: update logger meta-data, add to gitignore
2020-03-25 14:20:53 +11:00
Peter Hall
53caf516f9
SRV_Channel: add missing ProfiLED description values
2020-03-24 13:37:20 +09:00
Andrew Tridgell
f299a4af33
RC_Channel: added RC_OPTION bit for protocol logging
2020-03-24 09:10:36 +09:00
Andrew Tridgell
087da57858
AP_RCProtocol: added logging of RC prototol input bytes
2020-03-24 09:10:36 +09:00
bugobliterator
edaf9fa086
AP_Scripting: remove unused user of realloc from lua
2020-03-24 10:32:14 +11:00
bugobliterator
8215537f99
HAL_ChibiOS: deprecate realloc for ChibiOS build, so as to return error when used
2020-03-24 10:32:14 +11:00
bugobliterator
afea703aaf
AP_HAL: ensure libc realloc is available for all platforms except ChibiOS
2020-03-24 10:32:14 +11:00
bugobliterator
89d03f0243
AP_HAL_ChibiOS: implement standard realloc method
2020-03-24 10:32:14 +11:00
bugobliterator
c615bd9874
AP_HAL: implement standard realloc method
2020-03-24 10:32:14 +11:00
bugobliterator
88de9572aa
AP_Common: use standard realloc method from HAL
2020-03-24 10:32:14 +11:00
Rishabh
59af2fcbbb
AP_WindVane: Fix duplicate values in Param
2020-03-24 10:26:04 +11:00
Rishabh
44d35942b6
AP_RSSI: Fix duplicate values in ANA_PIN
2020-03-24 10:26:04 +11:00
Rishabh
9e8894139c
AP_BattMonitor: Fix duplicate values in VOLT_PIN param
2020-03-24 10:26:04 +11:00
Peter Barker
f4f2caeef2
AP_Tuning: avoid name collision with Copter's PTUN message
2020-03-22 18:35:14 +11:00
Peter Barker
2b5f15fe78
AP_TECS: add missing field documentation in TECS and TEC2
2020-03-22 18:35:14 +11:00
Peter Barker
35ad582440
AP_Logger: correct various onboard log message documentation
2020-03-22 18:35:14 +11:00
Peter Barker
cf0875bb00
AC_AutoTune: add missing axis field to ATUN message
2020-03-22 18:35:14 +11:00
Peter Barker
af62d7d7b6
AP_GyroFFT: inline used-only-once Log_Write parameters
...
This simplifies the code a little (no need to make these constants you
need to go and look up), and also makes external parsing easier.
2020-03-22 18:35:14 +11:00
Henry Wurzburg
8155f5dcbf
AP_TECS: fix typos in logger message meta-data
2020-03-22 10:04:53 +11:00
Henry Wurzburg
7bb5d92dcc
AP_Logger: fix typos in logger message meta-data
2020-03-22 10:04:53 +11:00
Peter Barker
1065317332
AC_AutoTune: add documentation for ATUN log message
2020-03-21 09:34:43 +11:00
Peter Barker
fa50b5f76d
AP_Logger: add more metadata for logged messages
...
LogStructure: add MAG log information
LogStructure: add MODE log information
LogStructure: add PID log information
AP_Logger: add ATT information
AP_Logger: add documentation for BAT log message
LogStructure: add RCIN and RCOU messages
AP_Logger: add VIBE message information
2020-03-21 09:34:43 +11:00
Peter Barker
de36b6a16a
AP_Logger: add LoggerMessage metadata for GPS message
2020-03-20 13:05:46 +11:00
Peter Barker
55ee3362b9
AP_Logger: add example of documentation for a log structure
2020-03-20 13:05:46 +11:00
Peter Barker
6c56f24e30
AP_TECS: add documentation for TECS and TEC2
2020-03-20 13:05:46 +11:00
Andrew Tridgell
fc0b2ef920
HAL_ChibiOS: added half-duplex protection for non-inverted
...
to prevent output bytes being seen as input bytes we disable half
duplex during transmit. This was previously only done for non-inverted
UARTs. This patch enables it whether we are inverted or not. This
greatly reduces the number of bad input bytes.
2020-03-20 12:37:52 +11:00
Andrew Tridgell
6b35497129
AP_RCProtocol: moved fport variables into class
...
reduced pollution of global namespace
2020-03-20 12:37:52 +11:00
Andrew Tridgell
a1069d85cb
AP_RCProtocol: fixed bug in FPort parser
...
if we got invalid frame->type values we would overrun the buffer and
cause memory corruption. This was the cause of the bug Polarijet found
2020-03-20 12:37:52 +11:00
Peter Hall
3f7ab6289d
AP_Scripting: move scripting_test.lua from examples to tests
2020-03-19 15:28:39 -07:00
Peter Hall
524d59ad78
AP_Scripting: add math and strings test scripts
2020-03-19 15:28:39 -07:00
Randy Mackay
05b563cf54
AP_Scripting: fixup comment in set-target-location example script
2020-03-19 15:17:11 -07:00
Randy Mackay
0846746932
AP_Scripting: add copter-fly-vertical-circle example script
2020-03-19 15:17:11 -07:00
Randy Mackay
fa0fb9ef34
AP_Scripting: add set-target-velocity example script
2020-03-19 15:17:11 -07:00
Randy Mackay
d7fb84c765
AP_Scripting: make bindings
2020-03-19 15:17:11 -07:00
Randy Mackay
60b3c6ca94
AP_Scripting: add bindings for start_takeoff and set_target_velocity_NED
2020-03-19 15:17:11 -07:00
Randy Mackay
849adcd678
AP_Vehicle: add start_takeoff and set_target_velocity_NED for use in scripting
2020-03-19 15:17:11 -07:00
Peter Hall
d37efe1b38
AP_Scripting: regenerate bindings
2020-03-19 14:59:34 -07:00
Peter Hall
67bfedd845
AP_Scripting: add button example script
2020-03-19 14:59:34 -07:00
Peter Hall
f5052b68a8
AP_Scripting: add binding for AP_Button get_button_state
2020-03-19 14:59:34 -07:00
Peter Hall
ecd7e12dd3
AP_Button: add crude debouncing and get_button_state function
2020-03-19 14:59:34 -07:00
Peter Barker
a59c3670c8
AP_HAL_ChibiOS: stash lr_thd in watchdog hardfault handler
2020-03-19 16:03:58 +11:00
Peter Barker
97b07d9c84
GCS_MAVLink: add option to get the autopilot to hard-fault itself
2020-03-19 16:03:58 +11:00
Andrew Tridgell
f00314a5d1
AP_GPS: removed dead blending code
2020-03-17 12:13:54 +11:00
Andrew Tridgell
9fa034d1de
AP_GPS: fixed antenna offset for blending
...
we were accessing beyond the end of the antenna_offset array
2020-03-17 12:13:54 +11:00
Peter Barker
0665c379de
AP_Compass: correct use of incorrect backend-count macro
2020-03-17 11:25:16 +11:00
Patrick José Pereira
1635054c4f
AP_Math: Add missing constexpr
...
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2020-03-17 10:23:47 +11:00
Peter Barker
c9f2b9ff87
AR_AttitudeControl: correct spelling error in param docs
2020-03-16 17:44:35 +11:00
Patrick José Pereira
e65cc35fb0
AP_HAL_Linux: Use template to generate raspberry pins
...
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2020-03-15 22:35:50 -07:00
Andrew Tridgell
5a4b648cf5
HAL_ChibiOS: disable flash fallback for boards with FRAM
...
this saves on flash and prevents confusing results when fram fails
2020-03-14 13:47:25 +11:00
Nick Exton
741abaf760
AP_Param: Add static assert on NVM struct sizes
2020-03-14 13:47:25 +11:00
Nick Exton
4cd39a4619
HAL_ChibiOS: improved selection of storage backend
2020-03-14 13:47:25 +11:00
Nick Exton
f9ec9c037a
AP_RAMTRON: improved driver robustness
...
- added retries on all operations
- detect errors with a CRC
- fixed detection of fujitsu devices
2020-03-14 13:47:25 +11:00
Andy Piper
104dd7cd75
AP_HAL_ChibiOS: remove board subtype for OmnibusNanoV6
2020-03-14 10:20:46 +11:00
Andrew Tridgell
add7615ed9
AP_HAL: removed unnecessary subtypes
2020-03-14 08:35:32 +11:00
Andrew Tridgell
986ad0dc27
HAL_ChibiOS: removed unnecessary subtype defines
2020-03-14 08:35:32 +11:00
Andrew Tridgell
c3f2117590
HAL_ChibiOS: fixed R9Pilot board ID
2020-03-14 07:05:22 +11:00
Peter Barker
4c19eb4bab
AP_NavEKF3: use compass reference rather than repeatedly asking AHRS for it
2020-03-13 08:26:18 +11:00
Peter Barker
903d81c263
AP_NavEKF2: use compass reference rather than repeatedly asking AHRS for it
2020-03-13 08:26:18 +11:00
Peter Barker
8679e95fca
AP_Logger: add comments about message_writer being leaked
...
These are really "shouldn't happen", and only happen at startup, so
impact of the memory leak is quite limited.
Fixing this requires putting in a virtual destructor on the
MessageWriter class - this and the calls add up to several hundred bytes
of flash.
2020-03-12 15:10:42 +11:00
Andrew Tridgell
87b97f8bee
AP_Scripting: added a VTOL failsafe example script
...
if fwd motor is lost try to make best effort to get home
2020-03-12 08:36:40 +11:00
Andrew Tridgell
e815b97c66
AP_Scripting: regenerate bindings
2020-03-12 08:36:40 +11:00
Andrew Tridgell
564740f06b
AP_Scripting: added get_vibration and get_target_location bindings
2020-03-12 08:36:40 +11:00
Andrew Tridgell
393a8785f3
AP_AHRS: implement get_vibration method on AHRS
2020-03-12 08:36:40 +11:00
Andrew Tridgell
d192544107
AP_Vehicle: added get_target_location() method
...
for scripting
2020-03-12 08:36:40 +11:00
Andrew Tridgell
be7e142888
AP_Scripting: regenerate bindings for RPM
2020-03-12 08:36:40 +11:00
Andrew Tridgell
609b535dda
AP_Scripting: added RPM interface
2020-03-12 08:36:40 +11:00
Andrew Tridgell
39fc324854
GCS_MAVLink: convert to new get_rpm() API
2020-03-12 08:36:40 +11:00
Andrew Tridgell
4f54d9b75f
AP_WindVane: convert to new get_rpm() API
2020-03-12 08:36:40 +11:00
Andrew Tridgell
ed37ebede8
AP_Logger: convert to new get_rpm() API
2020-03-12 08:36:40 +11:00
Andrew Tridgell
a93aa27cc1
AP_ICEngine: convert to new get_rpm() API
2020-03-12 08:36:40 +11:00
Andrew Tridgell
0f83da7e16
AP_Hott_Telem: convert to new get_rpm() API
2020-03-12 08:36:40 +11:00
Andrew Tridgell
429c21b887
AC_Autorotation: convert to new get_rpm() API
2020-03-12 08:36:40 +11:00
Andrew Tridgell
22ce90af34
AP_RPM: changed get_rpm() API to be scripting compatible
...
return a bool and use a reference for the value
2020-03-12 08:36:40 +11:00
Peter Barker
934d05f4ff
AP_Compass: correct incorrect and misleading comment
2020-03-11 22:24:36 +11:00
Peter Barker
621d029207
AP_Vehicle: add warning about get_scheduler_task implementations
...
We don't initialise these values we pass in. Considering how few times
we need to get this right, requiring it of the implementation would seem
to make sense and save a few bytes.
2020-03-11 22:23:56 +11:00
Andrew Tridgell
aaf828c9d4
GCS_MAVLink: consider NO_CHANGE as success for bootloader flash
...
this prevents GCS users from seeing "update failed"
2020-03-11 16:30:06 +11:00
Andrew Tridgell
d8b33bcac9
AP_InertialSensor: suppress expected errors from invensense IMUs
2020-03-11 16:30:06 +11:00
Andrew Tridgell
1540cf958b
HAL_ChibiOS: improve error messages for flashing bootloader
...
send progress as statustext messages
2020-03-11 16:30:06 +11:00
Andrew Tridgell
cf7c2b1475
HAL_ChibiOS: suppress SPI timeout error for expected delay
2020-03-11 16:30:06 +11:00
Andrew Tridgell
65cd223023
HAL_ChibiOS: implement in_expected_delay()
2020-03-11 16:30:06 +11:00
Andrew Tridgell
58b4b523fd
AP_HAL: added in_expected_delay()
...
allows for error message suppression when delays are expected
2020-03-11 16:30:06 +11:00
Randy Mackay
06b62107c7
AC_PosControl: move freeze_ff_z to be with other z-axis methods
...
Also minor comment fix to get_stopping_point_xy
2020-03-11 10:39:18 +09:00
Leonard Hall
25f1a4a4e1
AC_WPNav: add shift_wp_origin_to_current_pos_xy
...
also add shift_wp_origin_and_destination_to_stopping_point_xy
2020-03-11 10:39:18 +09:00
Leonard Hall
29332ac112
AC_PosControl: add relax_velocity_controller_xy
2020-03-11 10:39:18 +09:00
Andrew Tridgell
d35fff5186
HAL_ChibiOS: set CS pins high while in bootloader
...
this appears to be the root cause of the parameter resets on
CubeOrange. We need to ensure the CS pin is not floating or random
noise on the SPI bus for FRAM can cause the FRAM to become corrupt
2020-03-11 09:53:06 +11:00
Gone4Dirt
537a259ab6
AP_Mission: added to rewind mission on resume with MAV_CMD_DO_SET_RESUME_REPEAT_DIST
2020-03-11 09:48:40 +11:00
Peter Barker
ebfa910774
GCS_MAVLink: GCS_Dummy: add missing CR to console output of statustexts
...
send_text and friends don't expect the caller to add the CR; the GCS
will add one. Since we're jsut emitting to console, add one ourselves.
2020-03-10 19:07:08 +11:00
Peter Barker
1db081b095
AP_Vehicle: move AP_PARM_KEY_DUMP function up to AP_Vehicle base class
...
Common to all vehicles now, including Tracker
2020-03-10 11:00:14 +11:00
Peter Barker
d0edfd2c0d
AP_HAL_ChibiOS: VRUBrain-v51: reduce AP_MAX_EMBEDDED_PARAM to 1024
...
Stops us overflowing on Copter and Plane builds
2020-03-10 10:50:18 +11:00
Peter Barker
f8058bcf70
AP_HAL_Linux: avoid segfaults during early panics
...
singletons failing to be singleton can cause the segfaults. This is
more a tidiness thing - but better not to have cascading failures.
2020-03-10 10:45:09 +11:00
Peter Barker
19249a13fd
AP_Scripting: tell the user where their scripts directory is on failure
2020-03-10 08:43:03 +09:00
Peter Hall
e95e996cc4
AP_Scripting: Add led matrix examples
2020-03-10 10:37:26 +11:00
Peter Hall
bf76a8c727
AP_Scripting: update LED_roll example
2020-03-10 10:37:26 +11:00
Peter Hall
3002089396
AP_HAL_SITL: update function names
2020-03-10 10:37:26 +11:00
Peter Hall
e1c2977adc
AP_Notify: support ProfiLEDs
2020-03-10 10:37:26 +11:00
Peter Hall
fe5779fd88
AP_HAL_ChibiOS: add support for ProfiLEDs
2020-03-10 10:37:26 +11:00
Peter Hall
6ab13333c2
AP_HAL: support ProfiLEDs
2020-03-10 10:37:26 +11:00
Peter Hall
f1fee1ebc5
AP_SerialLED: support ProfiLEDs
2020-03-10 10:37:26 +11:00
Peter Hall
8dccea4a15
AP_Scripting: regenerate bindings
2020-03-10 10:37:26 +11:00
Peter Hall
426f5e6180
AP_Scripting: support ProfiLEDs
2020-03-10 10:37:26 +11:00
Peter Hall
001f71e3de
SRV_Channel: add ProfiLED ouputs
2020-03-10 10:37:26 +11:00
Andrew Tridgell
16f34778fc
HAL_ChibiOS: added f103-HWESC target
2020-03-04 16:21:06 +11:00
Andrew Tridgell
bca1bd2c72
HAL_ChibiOS: added f303-HWESC firmware
2020-03-04 16:21:06 +11:00
Randy Mackay
1486421581
AP_Scripting: rename arming-check-batt-temp example script
2020-03-04 11:28:10 +09:00
Randy Mackay
8d12c25555
AP_Vehicle: formatting fixes
2020-03-03 10:06:38 -07:00
Randy Mackay
2526aaeb74
AP_Scripting: set-target-location example script
2020-03-03 10:06:38 -07:00
Randy Mackay
ae8c8b71b2
AP_Scripting: make bindings
2020-03-03 10:06:38 -07:00
Randy Mackay
989241a6bd
AP_Scripting: fix limits on Location alt field binding
2020-03-03 10:06:38 -07:00
Randy Mackay
e8699ab9fe
AP_Scripting: add Location.alt to bindings
2020-03-03 10:06:38 -07:00
Randy Mackay
1e2fc444b6
AP_Scripting: add set_target_location binding
2020-03-03 10:06:38 -07:00
Randy Mackay
6f5d733ba9
AP_Vehicle: add set_target_location method
2020-03-03 10:06:38 -07:00
Peter Hall
fc0d845b6c
AP_Scripting: add NMEA decode example
2020-03-03 09:57:07 -07:00
Peter Barker
12f7337030
AP_Radio: correct for recent semaphore bool/void changes
2020-03-03 21:56:33 +09:00
Peter Barker
a32e54ea17
AP_Arming: correct toymode compilation for recent disarm-reason changes
2020-03-03 21:56:33 +09:00
Rishabh
f3e66055e5
GCS_MAVLink: Alert GCS if user tries calibration while vehicle is armed
2020-03-03 11:37:19 +11:00
Rishabh
cbccdfa8a3
AP_Compass: Alert GCS if user tries to calibrate compass while vehicle is armed
2020-03-03 11:37:19 +11:00
Peter Barker
d1f74faed7
AP_Notify: remove bad HIGH/LOW defines
...
These are just terrible defines to have in a header which can be
included into random files. These symbols can confuse construction of
enumerations, for example.
2020-03-03 10:46:06 +11:00
Peter Barker
09562e1f13
AP_HAL_Linux: use constants for high/low rather than defines, like ChibiOS
...
These are really bad defines to have hanging around for general use.
2020-03-03 10:46:06 +11:00
Peter Barker
1a123e5f8d
AP_HAL_ChibiOS: avoid referencing flash sector/page 22 on 1MB boards
2020-03-03 10:13:53 +11:00
Peter Barker
c917cd4dbb
AP_HAL_Linux: make a static-const hal references references to external symbol
2020-03-03 10:12:14 +11:00
Peter Barker
2d2fdf8bd0
AP_HAL_ChibiOS: make a static-const hal a reference to the external symbol
2020-03-03 10:12:14 +11:00
Peter Hall
2f036c65f3
AP_Motors: MotorsMulticopter fix floating boost output
2020-03-02 18:22:30 +09:00
Peter Hall
71f1755c97
AP_Scripting: update plane-wind-fs example
2020-02-27 18:33:56 -07:00
Peter Hall
6587653e14
AP_Scripting: regnerate bindings
2020-02-27 18:07:31 -07:00
Peter Hall
129dc16bdb
AP_Scripting: add mission scripting example
2020-02-27 18:07:31 -07:00
Peter Hall
46714d69a5
AP_Mission: add get id functions for scripting
2020-02-27 18:07:31 -07:00
Peter Hall
370b6473a2
AP_Scripting: add AP_Mission bindings
2020-02-27 18:07:31 -07:00
Andrew Tridgell
fbbba887e5
AP_Notify: implement SIM_LED_LAYOUT
...
added support for luminousbee layout
2020-02-27 13:12:26 +11:00
Andrew Tridgell
09b272b840
SITL: added SIM_LED_LAYOUT parameter
...
for layout of simulated LEDs
2020-02-27 13:12:26 +11:00
Andrew Tridgell
ccc7d48c20
HAL_ChibiOS: reserve plenty of DMA memory for luminousbee4
2020-02-27 13:12:26 +11:00
Andrew Tridgell
e582432a2f
AP_Scripting: regen bindings
2020-02-27 13:12:26 +11:00
Andrew Tridgell
2277e22bc7
AP_SerialLED: added define for LED limit
2020-02-27 13:12:26 +11:00
Andrew Tridgell
5ad4ceef71
AP_SerialLED: allow more than 32 LEDs
2020-02-27 13:12:26 +11:00
Andrew Tridgell
fe86d8bb0c
AP_Scripting: adjust for updated LED API
2020-02-27 13:12:26 +11:00
Andrew Tridgell
dbba89a024
AP_Notify: allow up to 64 LEDs on a pin
2020-02-27 13:12:26 +11:00
Andrew Tridgell
09d10df3a3
HAL_SITL: allow more than 32 LEDs on a pin
2020-02-27 13:12:26 +11:00
Andrew Tridgell
669b98c6df
HAL_ChibiOS: allow more than 32 WS2812 LEDs on a pin
2020-02-27 13:12:26 +11:00
Andrew Tridgell
5d15d867b5
AP_HAL: adjust LED API to allow more than 32 LEDs on a pin
2020-02-27 13:12:26 +11:00
Andrew Tridgell
5bfd607300
HAL_ChibiOS: added luminousbee4 flight controller
2020-02-27 13:12:26 +11:00
Peter Barker
fbe2e75b9f
GCS_MAVLink: divide time allowed to send messages fairly
2020-02-27 08:49:59 +11:00
murata
c6f12e519b
AP_SerialManager: Add a description
2020-02-26 12:18:40 +11:00
Bill Geyer
bf345b0dd4
AC_AttitudeControlHeli: update filter parameter desc mins
2020-02-26 08:02:27 +09:00
Randy Mackay
aff854f485
AC_AttitudeControl: update param ranges
2020-02-26 08:02:27 +09:00
Randy Mackay
6297306492
AP_LandingGear: add OPTIONS param to auto deploy and retract
2020-02-26 08:01:00 +09:00
Randy Mackay
cc33c8d116
AP_Scripting: make bindings
2020-02-25 19:55:54 +09:00
Randy Mackay
c0bc696b86
AP_Scripting: add arming-check-batt-temp example script
2020-02-25 19:55:54 +09:00
Randy Mackay
ccaa74655c
AP_Scripting: support external authorisation for arming
2020-02-25 19:55:54 +09:00
Randy Mackay
05a8e34d5c
AP_Arming: support auxiliary authorisation
2020-02-25 19:55:54 +09:00
Randy Mackay
2ee5f9dcc5
AP_Logger: ARM msg logs ArmChecks as uint32_t
2020-02-25 19:55:54 +09:00
Randy Mackay
df8bf27a7f
AP_Arming: get_enabled_checks returns uint32_t
2020-02-25 19:55:54 +09:00
Randy Mackay
8ad9a49900
AP_Mount: ignore rc trim when calculating desired mount angles
2020-02-25 17:38:24 +09:00
Randy Mackay
cd38940ecf
RC_Channel: formatting fixes
2020-02-25 17:38:24 +09:00
Randy Mackay
77d5165c01
RC_Channel: add norm_input_ignore_trim
...
same as norm_input but ignores the trim value
2020-02-25 17:38:24 +09:00
Andrew Tridgell
8f83bf5e80
AP_Compass: fixed in-flight learning for all compasses
...
after recent changes only first compass was learnt
See
https://discuss.ardupilot.org/t/break-in-latest-master-in-flight-compass-calibration/52602
2020-02-25 12:40:27 +11:00
Peter Barker
727c12c388
GCS_MAVLink: move initialisation of serial and gcs to AP_Vehicle
2020-02-25 11:50:55 +11:00
Peter Barker
2ede027635
AP_Vehicle: move initialisation of serial and gcs to AP_Vehicle
2020-02-25 11:50:55 +11:00
Peter Barker
2b7af4d70b
AP_Vehicle: fold init_vehicle back into AP_Vehicle init method
2020-02-25 11:47:52 +11:00
Peter Barker
a7c493d037
AP_BoardConfig: fold init_vehicle back into AP_Vehicle init method
2020-02-25 11:47:52 +11:00
Peter Hall
0ca6b7cf77
AP_HAL_ChibiOS: retry neopixel until successful send
2020-02-25 11:15:55 +11:00
Peter Barker
e2c9f6a8a1
GCS_MAVLink: add flags to MAV dataflash log
...
holds various pieces of simple information about a link
2020-02-25 10:59:22 +11:00
Peter Barker
10c9bc3659
AP_Logger: add flags to MAV dataflash log
...
holds various pieces of simple information about a link
2020-02-25 10:59:22 +11:00
Gone4Dirt
d813a70c8d
AP_Mission: Added force resume for when MIS_RESTART=1
2020-02-25 10:05:12 +11:00
Andy Piper
3b25a8ae2e
AP_GyroFFT: adjust default FFT lengths for boards that can cope and are likely to have BMI088
2020-02-25 08:35:09 +11:00
Andy Piper
509341957f
AP_HAL: check for div0 in quinn's estimator
2020-02-25 08:35:09 +11:00
Andy Piper
507bd9eea9
AP_InertialSensor: add in user-specified background noise when there is no rpm noise
2020-02-25 08:35:09 +11:00
Andrew Tridgell
41b74ec014
HAL_ChibiOS: use DNA by default for all AP_Periph builds
...
this makes multiple sensors of the same type on the bus easier
2020-02-22 12:28:16 +11:00
Andrew Tridgell
6139860a64
HAL_ChibiOS: use default USB IDs for fmuv3
2020-02-22 12:17:05 +11:00
Peter Barker
4d0c61970d
ArduSub: log disarm method
2020-02-22 12:16:29 +11:00
Peter Barker
347f64264d
RC_Channel: log disarm method
2020-02-22 12:16:29 +11:00
Peter Barker
f8f4ed7ee0
GCS_MAVLink: log disarm method
2020-02-22 12:16:29 +11:00
Peter Barker
1e82ae4676
AP_Scripting: log disarm method
2020-02-22 12:16:29 +11:00
Peter Barker
7b9cdd6d06
AP_Arming: log disarm method
2020-02-22 12:16:29 +11:00
Andy Piper
41b41c05f3
AP_InertialSensor: scale SITL motor noise by SIM_VIB_MOT_MULT
2020-02-22 11:15:37 +11:00
Andy Piper
2033cf3b4a
SITL: add SIM_VIB_MOT_MULT to allow motor noise to have a different amplitude to the fixed frequency noise
2020-02-22 11:15:37 +11:00
Andy Piper
c0c61660b0
SITL: quadplane updates
2020-02-22 11:15:37 +11:00
Andy Piper
dcdd1707f7
AP_HAL_SITL: make throttle comply with quadplane dynamics
2020-02-22 11:15:37 +11:00
Andy Piper
0e9b2a26c5
AP_InertialSensor: SITL the raw sample rate is not the same as the sensor rate
...
use regulated time for frequency noise to avoid spurious harmonics
SITL sensors must be true separate instances
don't compile in FFT structures if DSP disabled
2020-02-22 11:15:37 +11:00
Andy Piper
a16bb2f188
AP_Scheduler: allow registration of tasks at loop rate
2020-02-22 11:15:37 +11:00
Andy Piper
7663c67eec
AP_Arming: gyrofft arming checks
2020-02-22 11:15:37 +11:00
Andy Piper
6613d4da3d
AP_Vehicle: add FFT configuration and initialization
...
add arming checks to validate FFT performance
allow gyros to be sampled at either the fastloop rate or gyro rate.
add gyro and parameter update loops for GyroFFT
add GYRO_FFT aux function
save FFT results on disarm
2020-02-22 11:15:37 +11:00
Andy Piper
4c1816a983
Copter: port betaflight in-flight fft analysis to arducopter and expose as a log message
...
add harmonic notch tracking mode
call AP_GyroFFT::update_freq_hover() from update_throttle_hover()
move gyrofft configuration and control to AP_Vehicle
move fft logging to fft library
2020-02-22 11:15:37 +11:00
Andy Piper
6f5b991f28
Filter: add harmonic notch dynamic tracking mode
...
move definition of HNF_MAX_HARMONICS
2020-02-22 11:15:37 +11:00
Andy Piper
127a0e9b41
AP_HAL_Linux: add in empty dsp driver
2020-02-22 11:15:37 +11:00
Andy Piper
7d36bc4422
AP_GyroFFT: new FFT library for motor peak analysis using HAL DSP abstraction
...
add dynamic gyro windows
control inclusion based on HAL_WITH_DSP and GYROFFT_ENABLED
target appropriate ARM cpus
constrain window sizes to be achievable
improve FFT signal accuracy through configurable window overlap and quinn's estimator
calculate energy weighted center frequency
add support for learning hover frequency and throttle reference
calculate power spectrum rather than amplitude
record noise as a per-bin power spectrum
calculate true SNR per-bin and use that to determine there is a signal
add user config for SNR signal level
constrain frequency scanning to MAXHZ
calculate and learn the peak bandwidth at the configured attenuation
allow enabling/disabling dynamically through rc function
MAXHZ should be below Nyquist
Incorporate full range of MAXHZ to MINHZ
update FFT analysis in a separate thread
allocate memory in a specific region
constrain window size by CPU class
do not allocate any resources when not enabled
Prevent self-check and analysis interfering with each other
put configuration and initialization to AP_Vehicle
add logging
fix significant issues with threading, locking and sample buffer access
use both calculated noise peaks together with the harmonic notch configuration to detemine which peak represents the fundamental harmonic that should be tracked
record harmonic fit
add CMSIS 5 libraries and headers
allow larger FFT lengths on Linux and SITL
2020-02-22 11:15:37 +11:00
Andy Piper
7571b4d95c
AP_HAL_SITL: SITL version of DSP implementation
2020-02-22 11:15:37 +11:00
Andy Piper
495a89459f
AP_HAL_Empty: empty implementation of HAL FFT
2020-02-22 11:15:37 +11:00
Andy Piper
3d0cf7e12a
AP_HAL_ChibiOS: hardware M4-Cortex and M7-Cortex (and H7) implementation of HAL FFT abstraction
...
implements an FFT engine based on the betaflight feature using ARM hardware accelerated CMSIS library
make the FFT feature optional
add dynamic gyro windows
add quinns and candans estimators and record in DSP state
disable DSP for boards with limited flash
calculate power spectrum rather than amplitude
start/analyse version of analysis to support threading
allocate memory in a specific region
constrain window size by CPU class
control inclusion of DSP based on board size
2020-02-22 11:15:37 +11:00
Andy Piper
f4a99a1589
AP_HAL: hardware abstraction for FFT.
...
control inclusion of FFT based on HAL_WITH_DSP and HAL_GYROFFT_ENABLED. target appropriate ARM cpus
define hanning window and quinn's estimator
start/analyse version of FFT to support threading
allocate memory in a specific region
calculate frequency and noise bandwidth of two noisiest peaks
control inclusion of DSP based on board size
2020-02-22 11:15:37 +11:00
Andy Piper
3d9776dd6d
AP_InertialSensor: expose statically filtered gyro values for FFT analysis and allow sampling to gyro window for FFT analysis.
...
FFT windows can be dynamically allocated
add harmonic notch dynamic tracking mode
unwind gyro window allocation in the case of failure
allow access to harmonic notch harmonics
2020-02-22 11:15:37 +11:00
bnsgeyer
593ff6818d
AC_WPNAV:make speed changes during missions obey WPNAV_ACCEL
...
Includes commits by rmackay9
AC_WPNav: fixup max speed acceleration
AC_WPNav: simplify the initialisation of poscontrol's max speed
Changed at Leonard's request to keep things simpler
2020-02-22 08:53:41 +09:00
Randy Mackay
fc2e15651e
AC_PosControl: allow smaller changes in max speed and accel
...
also small changes in max speed for z-axis
2020-02-22 08:53:41 +09:00
ashvath100
1c77df9169
SITL: Rename morse-rover to morse-skid
2020-02-21 08:23:54 +09:00
yaapu
b4bdc76a53
AP_RCProtocol: handle 0x10 and 0x00 frames, check scheduler delay and fix incoming crc
...
Respond to 0x10 when the rx is controlling bandwidth, else respond only to 0x00
but in this case never exceed a max number of consecutive frames.
Always respond to polling and if necessary send a null frame.
moved delay check after get_telem_data() to account for scheduler time
align incoming to outgoing crc
2020-02-21 09:29:15 +11:00
yaapu
0c5618c9e7
AP_Frsky_Telem: add semaphores to ahrs access and fix potential array out of bounds access
...
use a semaphore for non atomic ahrs calls and fix a potential array out of bounds
access for faster than sport telemetry links.
2020-02-21 07:54:59 +11:00
Pierre Kancir
95ee01082f
AP_HAL_SITL: update search for dumpstack.sh
2020-02-20 20:41:26 +11:00
Andy Piper
387b5e7002
AP_Camera: bug fixes to support 5-key remote RunCams
...
allow the boot-time recording state to be configured
only process events on state transitions. Simplifies logic and debugging.
support regular Split 2s
allow menu enter/exit in 5-key mode
match betaflight with 5-Key OSD which requires an "enter" key
2020-02-20 19:58:43 +11:00
Andrew Tridgell
20ea1a3dc7
GCS_MAVLink: don't send statustext from other than main thread
...
This fixes high stack usage in the RCIN thread when it notifies the
GCS of a new RCIN protocol. The problem is severe when signing is
enabled, as signing adds over 500 bytes to stack cost of sending a
mavlink msg
fixes issue #13615
2020-02-20 10:39:29 +11:00
Michael du Breuil
d7a59bc449
AP_Scripting: Reduce the sleep time with no scripts
...
Lowering the sleep time when no scripts are pending, causes starting a
REPL session to respond much faster (this cuts the latency from up to 10
seconds to 1 second before the session is ready to start).
Also lowers the default scripting debug level to hide the statustext
from users, as in the general case this is just a spammy message if it
occurs, and we should be finding better reporting bits to get this to
the user.
2020-02-19 13:24:23 -07:00
Andrew Tridgell
772438f3ed
AP_NavEKF3: fixed use of antenna position when switching GPS primary
...
when GPS primary switches we were using a position which had not been
corrected for antenna offset. This was used for calculating the reset
for sensor change.
This fixes that (trivial fix) and also fixes a similar issue on
position reset
2020-02-19 18:12:54 +11:00
Andrew Tridgell
9030590a88
AP_NavEKF2: fixed use of antenna position when switching GPS primary
...
when GPS primary switches we were using a position which had not been
corrected for antenna offset. This was used for calculating the reset
for sensor change.
This fixes that (trivial fix) and also fixes a similar issue on
position reset
2020-02-19 18:12:54 +11:00
Andrew Tridgell
b49a76bb20
AP_Filesystem: fixed EOF on file read
...
should return number of bytes read. This fixes an issue with MAVProxy
ftp client
2020-02-19 18:11:41 +11:00
Andrew Tridgell
1cb711d35d
AP_Filesystem: make SITL take paths relative to starting directory
...
this makes SITL filesystem behave more like a real device
2020-02-19 18:11:41 +11:00
Siddharth Purohit
f00a39af52
AP_Compass: run style script on Compass.cpp
2020-02-19 13:59:53 +09:00