Hwurzburg
6dfbd9ce31
AP_HAL_ChibiOS: add batt mon defaults to Kakutef4 Mini
2021-09-14 10:14:20 +10:00
Andrew Tridgell
88d77d0acd
HAL_ChibiOS: change f303-PWM timers
...
fixes PWM on channels 3 and 4
2021-09-13 21:29:13 +10:00
mateksys
659286ee4f
ChibiOS: add icm42605 as substitution for icm20602
2021-09-11 17:37:12 +10:00
Andy Piper
e705f78b5e
AP_HAL_ChibiOS: correct and compact Pixhawk4-bdshot build
2021-09-08 17:09:49 +10:00
Andy Piper
c92c75c9a6
AP_HAL_ChibiOS: bdshot version of CUAVv5
2021-09-08 17:09:49 +10:00
Andy Piper
bb41db8478
AP_HAL_ChibiOS: bdshot version of CUAVv5Nano
2021-09-08 17:09:49 +10:00
Andrew Tridgell
d29057a158
HAL_ChibiOS: added f303-PWM
...
for a PWM output node based on mRo f303 CAN node
2021-09-08 17:06:44 +10:00
Andrew Tridgell
2e4766fe54
HAL_ChibiOS: ensure HI_POWER periph is on
2021-09-07 10:40:44 +10:00
Andrew Tridgell
532396e5e6
REVERT: HAL_ChibiOS: Rename STM32F412 hw definition file
...
This reverts commit 5de6c690d8
.
That commit broke the build for the affected board as the chibios
headers rely on the name of the file matching a ifdef
2021-09-07 10:37:43 +10:00
Andrew Tridgell
b77580f934
HAL_ChibiOS: avoid an issue with DCache init on H743
...
this fixes an issue found by Andy Piper where the H743 bootloader gets
a hard fault in the DCache enable code when SRAM1 is primary memory.
This is the simplest fix I could think of, and avoids the problem by
making DTCM the first segment in the bootloader.
Note that we can't use DTCM as first segment for main firmware since
we went to double precision EKF as the static variables don't fit
2021-09-06 18:23:03 +10:00
Hwurzburg
d0b67baefd
AP_HAL_ChibOS: add pin defs for RSSI to KakuteF7
2021-09-06 10:12:48 +10:00
Hwurzburg
854697f870
AP_HAL_ChibiOS: update default params for SWAN-K1
2021-09-06 08:07:06 +10:00
Andrew Tridgell
8462ce4e2e
HAL_ChibiOS: fixed GPIO lines for QioTekZealotF427
2021-09-03 18:16:43 +10:00
bugobliterator
4ecdf90470
AP_HAL_ChibiOS: add internal flash version of hwdef for H757I_EVAL
2021-09-01 17:10:53 +10:00
Siddharth Purohit
d484477a99
AP_HAL_ChibiOS: move to using PLL2_R_CK for QSPI
2021-09-01 17:10:53 +10:00
Siddharth Purohit
81dc237a19
AP_HAL_ChibiOS: move to using Instruction RAM with External Flash setup
2021-09-01 17:10:53 +10:00
Siddharth Purohit
1eb318c62b
AP_HAL_ChibiOS: increase clock frequency for QSPI
2021-09-01 17:10:53 +10:00
Siddharth Purohit
39bd229279
AP_HAL_ChibiOS: remove dependency on Semaphores in QSPIDevice in BL
2021-09-01 17:10:53 +10:00
Siddharth Purohit
813e93a69c
AP_HAL_ChibiOS: do not reset GPIO for boards with external flash
2021-09-01 17:10:53 +10:00
Siddharth Purohit
4ba2835de1
AP_HAL_ChibiOS: add config for supporting load from external flash
2021-09-01 17:10:53 +10:00
Siddharth Purohit
faedb12493
AP_HAL_ChibiOS: fix hwdef generation for bootloader supporting ext flash
2021-09-01 17:10:53 +10:00
Siddharth Purohit
6e81fcbed1
AP_HAL_ChibiOS: add support for things required to run QSPIDriver
2021-09-01 17:10:53 +10:00
Siddharth Purohit
a039711628
AP_HAL_ChibiOS: prepare H757I_EVAL for external flash programming
2021-09-01 17:10:53 +10:00
Andrew Tridgell
fdfa14c4c0
HAL_ChibiOS: adjust Swan-K1 tuning
2021-09-01 14:04:35 +10:00
Andrew Tridgell
584fb7cd7b
HAL_ChibiOS: use more USB buffers on higher end F7 chips
2021-08-31 10:12:00 +10:00
Andrew Tridgell
39f44147b8
HAL_ChibiOS: reduce the impact of UART DMA contention
...
this changes the heuristics for UART TX DMA allocation to greatly
reduce the chances of DMA contention causing long delays on other
devices
This fixes issues with FETTec driver output and gimbal status messages
as reported by Amilcar and OlliW. The problem is particularly bad when
no GPS is connected to GPS1 on fmuv3 and derived boards (such as
CubeBlack)
key changes:
- remember the contention_counter across begin() calls, as the GPS
calls begin with new baudrates regularly
- added a is_shared() API to Shared_DMA, allowing the UART driver to
avoid TX DMA on shared streams when at low baudrates.
2021-08-31 07:55:27 +10:00
Marek Łukasiewicz
5de6c690d8
HAL_ChibiOS: Rename STM32F412 hw definition file
2021-08-30 10:27:45 +10:00
bugobliterator
fd95c32d88
AP_HAL_ChibiOS: add CubeOrange Periph Heavy build
2021-08-27 09:17:30 -07:00
Andrew Tridgell
858a6b7e87
HAL_ChibiOS: allow FlywooF745 to build again
2021-08-27 07:45:58 +10:00
Marek S. Łukasiewicz
47f2e13024
HAL_ChibiOS: Add hwdef for BirdCANdy
2021-08-26 09:43:39 +10:00
bugobliterator
a32a32ab43
HAL_ChibiOS: change name for USART2_CTS pin in STM32H757xx.py
2021-08-25 10:09:23 +10:00
bugobliterator
21ad3c7ac1
AP_HAL_ChibiOS: add HereID board
2021-08-25 10:09:23 +10:00
Andrew Tridgell
e9427f1dae
HAL_ChibiOS: removed remnants of CHIBIOS_ADC_MAVLINK_DEBUG
2021-08-25 07:11:31 +10:00
Andrew Tridgell
4cebcede31
HAL_ChibiOS: switched to fix allocation for BMDA streams on H7
...
this avoids issues with BDMA stream assignments due to bugs found
while testing boards with both I2C4 and SPI6
2021-08-25 07:11:31 +10:00
Andrew Tridgell
57e87b9820
HAL_ChibiOS: measure MCU temperature and ref voltage on H7
...
this uses ADC3 to measure the internal MCU temperature and the reference
voltage. This uses a currently unused BDMA channel
2021-08-25 07:11:31 +10:00
Andrew Tridgell
531ca4289e
HAL_ChibiOS: switch to minimum scheduling delta of 10us
...
this avoids an issue with the ChibiOS 20.3 virtual timer
implementation that can result in a scheduling slip equal to the
system timer period.
Andy has been suggesting this change for a while. I resisted it as I
thought it would impact on soft-serial parsing, but it turns out it
doesn't.
Fixes issue #18383
2021-08-23 10:45:44 +10:00
Peter Barker
70aef84997
AP_HAL_ChibiOS: remove definitions of BOARD_PWM_COUNT_DEFAULT
...
No longer used
2021-08-20 10:51:19 +10:00
Andy Piper
0279c86f7f
AP_HAL_ChibiOS: use hardware serial inversion pins on F4 boards that support it
...
change mamba F405 to active high as per betaflight
2021-08-19 17:05:42 +10:00
bugobliterator
d64621e349
HAL_ChibiOS: remove duplicate FLASH_RESERVE_START_KB from hwdef
2021-08-19 14:20:58 +10:00
bugobliterator
4f65705c99
AP_HAL_ChibiOS: set proper name for CAN terminators on HerePro
2021-08-19 14:20:58 +10:00
bugobliterator
c7907bb8fb
AP_HAL_ChibiOS: update config for dual gps heading in HerePro
2021-08-19 14:20:58 +10:00
Andy Piper
b78d848a5d
AP_HAL_ChibiOS: add FlywooF745Nano board definition
2021-08-18 17:06:09 +10:00
Randy Mackay
a1eb84ebfd
AP_HAL_ChibiOS: swap Pixhawk4 blue and red LEDs
2021-08-17 10:13:39 +10:00
Dr.-Ing. Amilcar do Carmo Lucas
38a825c987
AP_HAL_ChibiOS: disable FETtec OneWire device driver
2021-08-13 16:22:37 +10:00
Andrew Tridgell
79b0571d7e
HAL_ChibiOS: added Swan K1 support
2021-08-10 10:08:05 +10:00
Andy Piper
7dea029626
AP_HAL_ChibiOS: probe for compasses on FlywooF745
2021-08-10 09:35:06 +10:00
Leonard Hall
4e06140c6c
AP_Hal_ChibiOS: Skyviper Parameters PSC_VELXY_FLTE
2021-08-10 08:33:56 +09:00
QioTek
30e23052a0
AP_HAL_ChibiOS: add Icm42605 as a backup to replace icm20649
...
AP_HAL_ChibiOS: add Icm42605 as a backup to replace icm20649
2021-08-10 07:00:52 +10:00
Andrew Tridgell
eb638a5267
HAL_ChibiOS: added CubeMX files for G431 and G441
2021-08-03 10:54:03 +10:00
Andrew Tridgell
8df99f0d15
HAL_ChibiOS: added G431 and G441 support
2021-08-03 10:54:03 +10:00
Andrew Tridgell
4df62ce719
HAL_ChibiOS: added mRo-M10095 G491 peripheral
2021-07-30 10:20:52 +10:00
Andrew Tridgell
4fce1ae092
HAL_ChibiOS: added G491 support
2021-07-30 10:20:52 +10:00
Hwurzburg
8b7b4d6796
AP_HAL_Chibios: Change RC in to RCINT to free a DMA channel
2021-07-28 17:24:06 +10:00
mateksys
08cd1171bf
Tools: added MatekF765-SE to autobuild
2021-07-26 18:13:46 +10:00
Isaac Alich
35beae6037
AP_HAL_ChibiOS: Make final tweaks to MambaF405US-I2C
2021-07-25 17:44:22 +10:00
Isaac Alich
bdcb32456e
AP_HAL_ChibiOS: Add support for MambaF405US-I2C based boards
2021-07-25 09:28:17 +10:00
Andrew Tridgell
bbcce717dc
HAL_ChibiOS: stop defaulting relay pins to 54 and 55
...
this just leads to confusion
2021-07-22 07:48:12 +10:00
bugobliterator
48b8fdfd48
AP_HAL_ChibiOS: make linecoding objects static arrays
2021-07-21 17:06:41 +10:00
bugobliterator
d1b0438412
AP_HAL_ChibiOS: add support for usb passthrough with baud changes
2021-07-21 17:06:41 +10:00
Michael Oborne
d622aad592
AP_HAL_ChibiOS: add get_usb_baud - support for usb baudrate
2021-07-21 17:06:41 +10:00
honglang
ef109721fe
AP_HAL_ChibiOS: hwdef: reorder CUAV-X7 IMUs
...
adjust the sequence of IMU sensors to have good performance.
2021-07-20 16:10:50 +10:00
Andrew Tridgell
a098c80671
HAL_ChibiOS: use DNA for node allocation on Matek GPS
...
this works as MSP is now active when a DNA server is not found
2021-07-15 14:38:11 +10:00
Andrew Tridgell
4f32fa537a
HAL_ChibiOS: define HAL_HAVE_HARDWARE_DOUBLE on F765, F777 and H7
2021-07-10 07:20:41 +10:00
Andrew Tridgell
6c712c9001
HAL_ChibiOS: use SRAM1 as first ram segment on H7
...
this is needed to give the linker more than 128k for static variables
with double precision maths.
2021-07-10 07:20:41 +10:00
mateksys
40200654af
AP_HAL_ChibiOS: add MatekF765-SE hwdef as a variant of MatekF765-Wing
2021-07-08 13:01:44 +10:00
Andy Piper
e9f0c59e61
AP_HAL_ChibiOS: re-enable LEDs on MatekF405-bdshot
2021-07-06 10:10:04 +10:00
Siddharth Purohit
9b2359b34c
AP_HAL_ChibiOS: allow option to enable ChibiOS features in bootloader
2021-07-02 08:50:16 +10:00
Siddharth Purohit
1a1dd76a4c
AP_HAL_ChibiOS: add initial herepro hwdef
2021-07-02 08:50:16 +10:00
Andrew Tridgell
b4b02b4ffc
HAL_ChibiOS: use nargs='+' for chibios_hwdef.py
2021-07-01 09:33:16 +10:00
willpiper
ce1ee6334f
AP_HAL_ChibiOS: addressed reviewed comments
2021-07-01 09:33:16 +10:00
willpiper
fb4a4e609a
AP_HAL_ChibiOS: added --extra-hwdef option
2021-07-01 09:33:16 +10:00
Siddharth Purohit
245f9d21b3
AP_HAL_ChibiOS: update clock config for FDCAN and External Flash
2021-06-30 19:34:36 +10:00
Siddharth Purohit
263fbbbdb0
AP_HAL_ChibiOS: add echo safe debug flag bouncebuffer
2021-06-30 19:33:17 +10:00
Siddharth Purohit
c962292bae
AP_HAL_ChibiOS: add support for H757I Evaluation board
2021-06-30 19:33:17 +10:00
Siddharth Purohit
abc26d1993
AP_HAL_ChibiOS: add QSPI Device Driver in HAL
2021-06-30 19:33:17 +10:00
Siddharth Purohit
4cb48da984
modules: update ChibiOS
2021-06-30 19:33:17 +10:00
Siddharth Purohit
0e4fbe7c46
AP_HAL_ChibiOS: allow using internal compasses onboard
2021-06-30 17:06:02 +10:00
bugobliterator
7e8f11b749
AP_HAL_ChibiOS: allow embedded bootloader to be excluded
...
Co-authored-by: Peter Barker <pb-gh@barker.dropbear.id.au>
2021-06-24 08:36:30 +10:00
Andrew Tridgell
ed93caadd5
HAL_ChibiOS: fixed build of VRUBrain-v51
...
overflowing flash
2021-06-21 16:48:10 -07:00
Andy Piper
3386cbb0df
AP_HAL_ChibiOS: add OREO support to CubeSolo.
...
add back RunCam and Spektrum support to MatekF405-Wing
remove gripper support from MatekF405-Wing
2021-06-16 20:25:58 +10:00
Samuel Tabor
3fc58de7ce
AP_HAL_ChibiOS: Restore soaring on F405-Wing board.
2021-06-16 09:15:03 +10:00
Andy Piper
d36b4bfa3f
AP_HAL_ChibiOS: make sure all MatekF405 bi-dir outputs get a DMA channel
...
only allow (b)dshot on M1-4 to get full DMA on USART3 and UART4
2021-06-15 09:49:02 +10:00
Dr.-Ing. Amilcar do Carmo Lucas
d363cbadcc
AP_HAL_ChibiOS: Disable un-needed hardware drivers in SkyViper builds
...
these boards have integrated ESCs with no telemetry
2021-06-09 21:42:51 +10:00
Tom Pittenger
1feec460c4
AP_HAL_ChibiOS: enable BattMon MPPT PacketDigital to CubeOrange-periph
2021-06-09 18:36:18 +10:00
Andrew Tridgell
f09abc705b
HAL_ChibiOS: bring us to 18k free for MatekF405-Wing plane build
2021-06-09 18:07:00 +10:00
Peter Barker
09e82e52e1
AP_HAL_ChibiOS: disable AP_EFI on MatekF405-Wing and omnibusf4pro
2021-06-08 14:08:34 +10:00
Peter Barker
3ba57fed89
AP_HAL_ChibiOS: add support for AP_Logger into AP_Periph
2021-06-08 09:57:55 +10:00
Andrew Tridgell
c34d8e80e9
HAL_ChibiOS: fixed serial info indexing for EMPTY uarts
2021-06-05 18:52:33 +10:00
Andrew Tridgell
a895bc1846
HAL_ChibiOS: reduce flash on VRBranin-v51
2021-06-05 13:05:30 +10:00
honglang
847ce3b311
AP_HAL_ChibiOS: CUAV X7/Nora: use icm42688 instead of bmi088
2021-06-03 13:57:27 +10:00
CUAVcaijie
0ff38e1379
HAL_ChibiOS: CUAV ICM20649 on SPI6 bus replaced by ICM20689
...
alternative IMUs for Nora and X7
2021-06-02 10:49:55 +10:00
Andrew Tridgell
5529ba36e2
HAL_ChibiOS: added HolybroGPS AP_Periph port
2021-06-01 09:19:51 +10:00
Andrew Tridgell
23c0f257b6
HAL_ChibiOS: default off serial protocols in AP_Periph
...
this allows for a GPS on high numbered ports
2021-06-01 09:19:51 +10:00
Andrew Tridgell
ac1e03e16a
HAL_ChibiOS: move heater gains on CubeOrange to hwdef.dat
...
this makes it easier for users using apjtool to override params
2021-06-01 08:07:49 +10:00
Andrew Tridgell
244d896bfb
HAL_ChibiOS: enable heater on Pix32v5
2021-06-01 08:07:49 +10:00
Michael Oborne
126456742a
Hwdef: add Joey
2021-05-27 14:19:55 +10:00
Andrew Tridgell
91dce554d1
HAL_ChibiOS: removed unnecessary USB product IDs from boards
2021-05-27 09:30:30 +09:00
Andrew Tridgell
de3a3f7edf
HAL_ChibiOS: fixed case of Pix32v5 USB product string
2021-05-27 09:30:30 +09:00
Andrew Tridgell
fced5271af
HAL_ChibiOS: expand pin map of G474 to cover 64 pin parts
2021-05-25 09:35:25 +10:00
Peter Barker
79809b60aa
AP_HAL_ChibiOS: rename f103-periph/hwdef.dat to .inc (f303 too)
2021-05-20 17:23:17 +10:00
Siddharth Purohit
5bcc713985
AP_HAL_ChibiOS: add omnibusf4pro config with one compass and gps
2021-05-19 18:04:20 +10:00
Peter Barker
31ef6db937
AP_HAL_ChibiOS: remove redundant HAL_LOGGING_ENABLED from AP_Periph hwdefs
2021-05-19 17:38:47 +10:00
Andrew Tridgell
ebe858f762
HAL_ChibiOS: auto-set HAL_LOGGING_ENABLED for AP_Periph builds
2021-05-19 17:38:47 +10:00
Peter Barker
7d8c5757d6
AP_HAL_ChibiOS: move from HAL_NO_LOGGING to HAL_LOGGING_ENABLED
2021-05-19 17:38:47 +10:00
Andy Piper
6a21446bac
AP_HAL_ChibiOS: correct KakuteF4Mini board id
2021-05-18 10:02:36 +10:00
Andy Piper
25be0cf4b4
AP_HAL_ChibiOS: pull the right pin for KakuteF4 buzzer
2021-05-18 10:02:36 +10:00
vierfuffzig
393ac386cc
AP_HAL_ChibiOS: add revo-mini-i2c alt configs
2021-05-18 09:53:38 +10:00
Andy Piper
b33b07e43f
AP_HAL_ChibiOS: fixes for KakuteF4Mini
2021-05-12 17:26:35 +10:00
Andy Piper
387812bb01
AP_HAL_ChibiOS: avoid startup scream on KakuteF4 and variants
2021-05-12 17:26:35 +10:00
Andy Piper
f0ff4a2cd4
AP_HAL_ChibiOS: hwdef for KakuteF4Mini
2021-05-12 17:26:35 +10:00
Andrew Tridgell
e1a5d73504
HAL_ChibiOS: fixed DTCM comment for F732
2021-05-09 06:44:19 +10:00
Andrew Tridgell
b7fffe35f9
HAL_ChibiOS: added FreeflyRTK GPS build
...
a F732 based GPS peripheral
2021-05-09 06:44:19 +10:00
Andrew Tridgell
6b9e4161cb
HAL_ChibiOS: removed UDID_START from all MCU defs
...
use UID_BASE from ChibiOS headers
2021-05-09 06:44:19 +10:00
Andrew Tridgell
36d5c98e96
HAL_ChibiOS: default UDID_START to UID_BASE
2021-05-09 06:44:19 +10:00
Andrew Tridgell
2dc4c50953
HAL_ChibiOS: fixed default OTP address and size
2021-05-09 06:44:19 +10:00
Andrew Tridgell
22f7218acf
HAL_ChibiOS: support 512k F7 parts for flash
2021-05-09 06:44:19 +10:00
Andrew Tridgell
03cae60471
HAL_ChibiOS: added STM32F732 support
2021-05-09 06:44:19 +10:00
Andrew Tridgell
f1de0c7fe2
HAL_ChibiOS: added F732 16MHz CubeMX config
2021-05-09 06:44:19 +10:00
Andy Piper
f3f3056dba
AP_HAL_ChibiOS: add support for dshot commands to rcout
...
add support for dshot beepcodes through tonealarm
add support for dshot reversal and command queue
add support for dshot commands to all channels
correctly manage channel enablement in PWM groups
Correctly send dshot commands when using bi-dir dshot
allow reversible settings to be changed
ChibiOS: allow more than one type of ESC for dshot commands
Only execute reverse/reversible commands on BLHeli
add support for checking active ESCS
mark ESCs active when bdshot telemetry is returned
allow dshot alarm to be disabled
allow priroitized dshot commands
2021-05-05 17:41:24 +10:00
Andrew Tridgell
8764d69e2c
HAL_ChibiOS: default SDMMC clock to 12.5MHz max on H7
...
this makes microsd considerably more reliable
2021-05-02 13:04:42 +10:00
QioTek
ca6102ed28
f103Qiotek_Periph
...
f103Qiotek_Periph
2021-04-24 07:48:40 +10:00
QioTek
1de3135d14
HAL_ChibiOS: added f103-QiotekPeriph hwdef ( #1 )
...
HAL_ChibiOS: added f103-QiotekPeriph
2021-04-24 07:48:40 +10:00
Andy Piper
42ebc13e6c
Revert "AP_HAL_ChibiOS: support 6 bi-directional dshot channels on the MatekH743"
...
This reverts commit f9d166edf6
.
2021-04-22 18:39:06 +10:00
Andrew Tridgell
6764f039ca
HAL_ChibiOS: added support for the new H7 luminousbee version 5
2021-04-21 20:41:34 +10:00
Andy Piper
f9d166edf6
AP_HAL_ChibiOS: support 6 bi-directional dshot channels on the MatekH743
2021-04-21 17:18:53 +10:00
Andy Piper
558631918c
AP_HAL_ChibiOS: add %age of total to thread statistics
...
don't display meaningless thread info
2021-04-21 17:14:11 +10:00
Andrew Tridgell
961e538cc0
HAL_ChibiOS: reduced flash usage on MatekF405
...
overflowing by 1k
2021-04-21 07:12:55 +10:00
Andrew Tridgell
eca8cf3414
HAL_ChibiOS: save flash on boards that are critically low
...
move to single OSD font on some boards
this saves about 12k on these boards. They were also extremely close
to overflowing flash, under 2k on some
Now that we support having an OSD font on the microSD card (where
available) we can reduce built in fonts without a large functionality
impact
This also disables some less used features on these boards:
- generator support
- object avoidance path planning
- precision landing
This will give us some breathing room on these boards
2021-04-13 09:58:59 +10:00
anbello
77998fb5ba
revo-mini bdshot
2021-04-07 17:44:29 +10:00
anbello
dcb90c7bdb
revo-mini ext i2c
2021-04-07 17:26:56 +10:00
Andy Piper
be39e1f297
AP_HAL_ChibiOS: correct current scale for BeastH7 and BeastF7
2021-04-07 17:25:19 +10:00
Andy Piper
aa0ec0f091
AP_HAL_ChibiOS: optimize BeastH7 compilation
2021-04-07 17:25:19 +10:00
Andrew Tridgell
61c829d624
HAL_ChibiOS: only use SRAM4 for DMA for now
...
we can enable others when we have an allocation interface that
specifies the peripheral type
2021-04-07 17:10:45 +10:00
Iampete1
2377d33417
AP_HAL_ChibiOS: H7 set SRAM4 to no cache and allow DMA
2021-04-07 17:10:45 +10:00
Andy Piper
b3dbc21fa7
AP_HAL_ChibiOS: KakuteF7 bdshot configuration, tested by yaapu
2021-04-06 11:33:53 +10:00
Andrew Tridgell
45477f6063
HAL_ChibiOS: fixed default MSP port for f405-MatekGPS
2021-04-05 11:02:32 +10:00
Andrew Tridgell
ca948171fe
HAL_ChibiOS: fixed ADC error on revXY STM32H7 boards
...
with the new ChibiOS revision we were configuring for newer revisions
of the H7, which meant that we changed the ADC config. This broke ADC
readings on revX and revY H7 MCUs.
This PR fixes it in two ways:
1) change ChibiOS config to assume XY config chips
2) use 16 bit ADC for H7, which means the chip rev doesn't matter,
and also gives us 16x the resolution for ADC readinga, so we can
read smaller voltage and current values
2021-04-05 11:01:03 +10:00
willpiper
94bdca7f6f
AP_HAL_ChibiOS: tidy up beastF7 DMA channels
2021-04-04 16:51:19 +10:00
Andrew Tridgell
f0d6b79e8a
HAL_ChibiOS: fixed skyviper builds with BMM150
2021-03-30 13:31:50 +09:00
Andrew Tridgell
2d4dfe8a2a
HAL_ChibiOS: fixed (unused) FF_FS_TIMEOUT
...
this change was harmless as we don't define FF_FS_REENTRANT
2021-03-23 12:01:20 +11:00
Andrew Tridgell
ffb2876f58
HAL_ChibiOS: disable unused ChibiOS features
2021-03-23 12:01:20 +11:00
Andrew Tridgell
b4e4d48e52
HAL_ChibiOS: switch OMNIBUSF7V2 timer for RCIN
...
this avoids a conflict with shared interrupt on TIM1
2021-03-23 12:01:20 +11:00
Andrew Tridgell
ff31e10d9e
HAL_ChibiOS: ensure that RCIN DMA channel is not shared
...
RCIN DMA cannot be shared as it runs all the time
2021-03-23 12:01:20 +11:00
Andrew Tridgell
2842730868
HAL_ChibiOS: fixed F3 CAN build
2021-03-23 12:01:20 +11:00
Andrew Tridgell
2fc7ea1a8b
HAL_ChibiOS: added G4-ESC hwdef
2021-03-23 12:01:20 +11:00
Andrew Tridgell
ac9e6ba86d
HAL_ChibiOS: fix label for CCM on G4
2021-03-23 12:01:20 +11:00
Andrew Tridgell
f57b1b9c4b
HAL_ChibiOS: support logical/physical CAN bus mapping
...
allow for first CAN interface to be CAN2 or CAN3
2021-03-23 12:01:20 +11:00
Andrew Tridgell
2f7ff778be
HAL_ChibiOS: fixed bug in DMA resolver
...
idsets can be empty for a peripheral
2021-03-23 12:01:20 +11:00
Andrew Tridgell
439a944801
HAL_ChibiOS: added support for STM32G474 MCU
2021-03-23 12:01:20 +11:00
Andy Piper
e1d71486e4
AP_HAL_ChibiOS: build fixes for ChibiOS 20.3.x
2021-03-23 12:01:20 +11:00
Andrew Tridgell
5b59445471
AP_HAL_ChibiOS: fixes for build with 20.3.x ChibiOS
2021-03-23 12:01:20 +11:00
QioTek
fe30612bb0
AP_HAL_ChibiOS: release ICM20649 reserve sensor
...
BMI055 & BMI088 out of stock, release ICM20649 reserve sensor
2021-03-22 19:05:03 +11:00
Andrew Tridgell
bbd32844d1
HAL_ChibiOS: switch more boards to 32k FRAM
...
this enables the parameter backup/restore on those boards, as well as
more waypoints
This is in response to a report that CUAVv5 boards can suffer from the
parameter reset issue
2021-03-21 11:59:12 +11:00
Andy Piper
bb270014e7
AP_HAL_ChibiOS: make sure LEDs get a DMA channel on MatekH743-bdshot
2021-03-17 18:28:01 +11:00
Andrew Tridgell
8a8db85b9c
HAL_ChibiOS: fixed build of f103-trigger fw
2021-03-16 18:28:58 +11:00
Lava Chemist
4a52f945db
AP_HAL_ChibiOS: Add FlywooF745
2021-03-16 11:27:23 +11:00
Andy Piper
d6575fb6ad
AP_HAL_ChibiOS: bdshot configs for CubeYellow and mRoControlZeroH7
2021-03-03 18:02:26 +11:00
Andrew Tridgell
4fbdb59398
HAL_ChibiOS: prevent sharing the same DMA stream on TIMn_UP channels
...
this avoids an issue with DShot where we run the same DMA stream on
two timers at once
2021-03-02 11:58:38 +11:00
Andy Piper
6cb263056d
AP_HAL_ChibiOS: build fix for iomcu
2021-03-02 11:58:38 +11:00
Andy Piper
d0e4d510cf
AP_HAL_ChibiOS: order PWM timers by DMA UP stream id to prevent deadlocks in dshot
2021-03-02 11:58:38 +11:00
Andrew Tridgell
243cf2199d
HAL_ChibiOS: disable shared DMA on IOMCU
...
this saves about 600 bytes of ram
2021-02-24 18:21:08 +11:00
Mirko Denecke
edc2b0c94e
AP_HAL_ChibiOS: fix copy and paste typo
2021-02-23 08:15:50 +09:00
Andrew Tridgell
7af20e9ea3
HAL_ChibiOS: increase H7 serial buffer sizes
...
this takes better advantage of the new UART code. Log download over
USB gets to 730 kbyte/s. For comparison, with the 4.0 code on the same
H7 we get about 300 kbyte/s
2021-02-20 20:49:45 +11:00
Andrew Tridgell
5e0f175223
HAL_ChibiOS: adjust UART buffer sizes for new UART code
...
this gains about 20k of RAM, and has almost no impact on log download
speed at 921600 on a F427. The improved threading means we can afford
to have smaller buffers
2021-02-20 14:37:11 +11:00
Andy Piper
94de238751
AP_HAL_ChibiOS: disable RCOUT thread on iomcu and rebuild iomcu.
2021-02-20 14:37:11 +11:00
Andy Piper
f9c5f9be00
AP_HAL_ChibiOS: make dshot DMA unlock event driven in order to allow unlocking from rcout thread
...
refactor rcout into separate thread and process all dshot requests there
move uart DMA completion to event model
process dshot locks in strick reverse order when unlocking
convert Shared_DMA to use mutexes
move UART transmit to a thread-per-uart
do blocking UART DMA transactions
do blocking dshot DMA transactions
trim stack sizes
cancel dma transactions on dshot when timeout occurs
support contention stats on blocking locking
move thread supression into chibios_hwdef.py
invalidate DMA bounce buffer correctly
separate UART initialisation into two halves
cleanup UART transaction timeouts
add @SYS/uarts.txt
move half-duplex handling to TX thread
correct thread statistics after use of ExpandingString
set unbuffered TX thread priority owner + 1
correctly unlock serial_led_send()
don't share IMU RX on KakuteF7Mini
observe dshot pulse time more accurately.
set TRBUFF bit for UART DMA transfers
deal with UART DMA timeouts correctly
don't deadlock on reverse ordered DMA locks
change PORT_INT_REQUIRED_STACK to 128
2021-02-20 14:37:11 +11:00
mateksys
7eb4e9b370
AP_Periph: set PORT defaults for F405-MatekGPS
2021-02-18 11:51:50 +11:00
mateksys
97c2b7228e
AP_Periph: Matek F303 and F405 AP_Periph use DSP310 baro
2021-02-18 11:51:50 +11:00
Michael du Breuil
c0da87c066
AP_HAL_ChibiOS: Update HitecMosaic to reflect changes to GPS config
2021-02-15 16:31:45 -07:00
Andrew Tridgell
9de1519928
HAL_ChibiOS: prevent hw flow control from hogging a DMA channel
...
When hw flow control is enabled check the CTS pin before we grab the
DMA channel to prevent a long timeout trying to send to a blocked port
from holding a DMA channel against another device
this fixes issue #16587
2021-02-15 07:23:56 +11:00
Andrew Tridgell
098a17fe2e
HAL_ChibiOS: fixed CubeOrange ADSB param name
2021-02-13 13:06:20 +11:00
Andy Piper
20d8696a0a
AP_HAL_ChibiOS: BeastH7 has DPS310 baro
2021-02-10 18:33:59 +11:00
Andrew Tridgell
814393c9c2
HAL_ChibiOS: switch from DPS280 to DPS310 in boards that use the DPS310
2021-02-09 11:37:07 +11:00
Andrew Tridgell
86fda93781
HAL_ChibiOS: added heater correction of AK09916
...
this fixes a problem with the internal compass being impacted by the
magnetic field from the heater
2021-02-09 11:32:19 +11:00
Andrew Tridgell
2ab8ad0ef0
HAL_ChibiOS: added Durandal pinout details
2021-02-09 07:14:02 +11:00
Michael du Breuil
623951a262
AP_HAL_ChibiOS: Add some extra GPS SBF config
2021-02-05 11:52:29 -07:00
Andy Piper
2cdc202d19
AP_HAL_ChibiOS: use non-cachable SRAM3 for DMA on H743
...
Adjust SRAM1+SRAM2 to 256k as describe in the H743 reference manual
Provide access to mem_info() information
Co-authored-by: Andrew Tridgell <andrew@tridgell.net>
2021-02-03 23:35:44 +11:00
Andy Piper
06a1500f98
AP_HAL_ChibiOS: ensure GPIO pins get undef'ed properly
...
minimise bi-directional dshot configs for:
CubeOrange
Durandal
MatekF405
MatekH743
OmnibusNanoV6
Pixracer
mRoPixracerPro
omnibusf4pro
CUAV-X7
2021-02-03 18:49:06 +11:00
Michel Pastor
41f7587637
ChibiOS: Add SWD pins to SuccexF4 bootloader
2021-02-03 18:37:46 +11:00
auturgy
24268cc6de
AP_HAL_ChibiOS: add MatekH743-periph hwdef
2021-02-03 18:17:44 +11:00
mateksys
b91c65b4a4
AP_HAL_ChibiOS: add f405-MatekGPS & MatekF405-CAN hwdef
2021-02-03 18:09:35 +11:00
huhen
9ba35580db
HAL_ChibiOS: Init kakutef7 motor pins for correct initialization of some ESCs
2021-02-03 13:13:32 +11:00
Andy Piper
6f5d5c2bf9
AAP_HAL_ChibiOS: allow asserts to be printed on a GPIO pin
2021-01-27 19:36:58 +11:00
Andy Piper
20d928a86a
AP_HAL_ChibiOS: don't share DMA on OmnibusNanoV6 for Flash SPI
2021-01-27 19:04:49 +11:00
Andy Piper
873d35acd9
AP_HAL_ChibiOS: bi-directional dshot for MatekH743
2021-01-27 18:58:38 +11:00
Andy Piper
877dde4736
AP_HAL_ChibiOS: on BeastF7 share TIM3 UP/CH and give flash SPI dedicated channel
2021-01-27 18:54:43 +11:00
Andy Piper
2823fa7245
AP_HAL_ChibiOS: never write bytes that have not been erased on H7
...
Be more careful about flash failure conditions on H7
2021-01-27 18:30:36 +11:00
Andy Piper
78735a946e
AP_HAL_ChibiOS: allow STM32_FLASH_DISABLE_ISR for H7
2021-01-27 18:30:36 +11:00
Andrew Tridgell
d81c2ee407
HAL_ChibiOS: allow for some embedded parameters on AP_Periph builds
2021-01-21 06:19:46 +11:00
bugobliterator
8b90eb23e0
AP_HAL_ChibiOS: distcc doesn't like lst generation commands
2021-01-20 19:21:14 +11:00
Andy Piper
9e641a32ad
AP_HAL_ChibiOS: don't share flash SPI on BeastH7 and compile with -Os
2021-01-20 18:12:57 +11:00
bugobliterator
c02c546077
AP_HAL_ChibiOS: add support for inline comments in hwdef.dat
2021-01-18 09:37:11 +11:00
bugobliterator
41693403e2
AP_HAL_ChibiOS: retain memory of past conflicts in dma_resolver
2021-01-18 09:37:11 +11:00
Andrew Tridgell
f93e2f6717
HAL_ChibiOS: enable 32k FRAM on H7 boards
2021-01-16 06:47:10 +11:00
pkocmoud
7b61a4d8c2
HAL_ChibiOS: support F7 with no crystal
2021-01-15 15:48:01 +11:00
Andy Piper
cb5be4fcc1
AP_HAL_ChibiOS: don't share IMU DMA on MatekH743 to avoid SPI DMA contention
2021-01-15 14:32:39 +11:00
Andy Piper
e781572d53
AP_HAL_ChibiOS: support iFlight BeastF7
...
reduce DMA contention on BeastH7 and correct sharing
add README's for BeastF7 and BeastH7
2021-01-13 18:09:33 +11:00
bugobliterator
4346264113
AP_HAL_ChibiOS: ensure UP and CH timer channels share DMA for H7
2021-01-12 10:45:03 +11:00
Andrew Tridgell
14433c3ae3
HAL_ChibiOS: enable ICM-40609 on mRoNexus
2021-01-11 14:43:35 +11:00
Andrew Tridgell
afbdd69165
AP_HAL_ChibiOS: adjust stack sizes
2021-01-10 08:28:55 +11:00
Andy Piper
8fb403c569
AP_HAL_ChibiOS: make sure BDMA channels are not adjacent
2021-01-10 08:11:37 +11:00
Andrew Tridgell
42bc9adfb7
HAL_ChibiOS: use ExpandingString for @SYS buffers
2021-01-05 10:52:00 +11:00
Andrew Tridgell
324ff178d8
HAL_ChibiOS: fixed CUAV_GPS defaults.parm
2021-01-03 16:24:12 -08:00
Tom Pittenger
113f792ad1
AP_HAL_ChibiOS: update periph targets who have buzzer/LEDs with notify
2021-01-03 16:24:12 -08:00
Hwurzburg
ce361e51bf
HAL_ChibiOS: Reinstate HAL_MINIMIZE_FEATURES for 1MB F7 boards
2021-01-02 08:57:47 +11:00
Andrew Tridgell
e260c7ad59
HAL_ChibiOS: update f303-MatekGPS to allow disable of MSP
...
and use DMA for MSP
2021-01-01 15:40:13 +11:00
David B. Bitton
8dbe0a71ba
AP_HAL_ChibiOS: add support for Toshiba LED
2020-12-31 11:02:10 -08:00
Andy Piper
401e5c2073
AP_HAL_ChibiOS: add support for bidir DShot support in RCOutput
...
add support for sampling GPIO pins using timer
don't restart pwm group when not doing bi-dir
fix hwdef generation preproc for TIM DMA
decode telemetry at the start of the dshot cycle
calculate dshot pulse separation correctly and ensure we output rapidly enough
calculate dshot min periods and timeouts correctly
refactor dshot_send() into dshot_send_groups()
use bi-dir dshot channel mask
selectively enable bi-dir RC Channels
process bi-dir mask correctly when allocating DMA channels
allow UP and CH DMA channel sharing
optionally enable bidir vars in hwdef.
enable bi-dir dshot in KakuteF7Mini
enable bi-dir dshot in OmnibusF4Pro
enable bi-dir dshot in OmnibusNanoV6
enable bi-dir dshot in MatekF405
enable bi-dir dshot in fmuv5
enable bi-dir dshot in fmuv3
enable bi-dir dshot in OmnibusF7V2
enable bi-dir dshot in OmnibusNanoV6
enable bi-dir dshot in CubeOrange
enable bi-dir dshot in Pixracer
enable bi-dir dshot in mRoPixracerPro
Co-authored-by: bugobliterator <siddharthbharatpurohit@gmail.com>
2020-12-30 19:14:16 +11:00
Andy Piper
83c8807b39
AP_HAL_ChibiOS: when HAL_ENABLE_THREAD_STATISTICS is defined add ChibiOS thread stats to threads.txt
...
define HAL_ENABLE_THREAD_STATISTICS in hwdef.h
2020-12-30 18:15:05 +11:00
Andy Piper
a4b2930223
AP_HAL_ChibiOS: iFlight Beast H7 AIO hwdef
2020-12-30 18:13:03 +11:00
ukmook
bf34041211
AP_HAL_ChibiOS: add support for Pixracer-periph
2020-12-29 07:52:39 -07:00
Tom Pittenger
5432c9957a
AP_HAL_ChibiOS: rename AP_PERIPH_<feature>_DEFAULT to HAL_PERIPH_<feature>_DEFAULT
2020-12-28 09:16:02 +11:00
Tom Pittenger
083088bfff
AP_HAL_ChibiOS: adjust defaults to use param instead of hardcoded defaults
2020-12-25 16:24:50 -07:00
Ari Krupnik
79e1f5e8bd
AP_HAL_ChibiOS: standard spelling of variant
2020-12-25 00:01:50 +11:00
Phillip Kocmoud
062c6cef41
HAL_ChibiOS: Fix typo relating to pin PB7:I2C4_SDA
2020-12-23 06:43:19 +11:00
Siddharth Purohit
5b58163c35
AP_HAL_ChibiOS: add HAL_PERIPH_ENABLE_RCOUT_TRANSLATOR to CubeBlack-periph and CubeOrange-periph
2020-12-21 18:27:07 -08:00
Tom Pittenger
da74d755d0
AP_HAL_ChibiOS: add new HAL_PWM_COUNT define
2020-12-21 18:27:07 -08:00
Tom Pittenger
f670f7a9b6
AP_HAL_ChibiOS: change ADSB to use param ADSB_PORT instead of define
2020-12-17 23:24:04 -08:00
Tom Pittenger
5c98e18236
AP_HAL_CubeORange-periph: enable HAL_PERIPH_ALLOW_MAVLINK_UART_OR_USB_REBOOT_CMD on USB
2020-12-18 06:59:09 +11:00
Andrew Tridgell
b4201436dd
HAL_ChibiOS: fixed flash space on 16k bl boards
...
this avoids the stm32_flash_recent_erase() function which added around
800 bytes to the bootloader. It is not needed
2020-12-17 12:51:25 +11:00
Sebastian Witt
6cfaae4e7d
AP_HAL_ChibiOS: Support for Diatone MambaF405 MK2
2020-12-16 19:07:07 +11:00
Andrew Tridgell
e54fc4b0de
AP_HAL_ChibiOS: convert to using hal.serial() instead of hal.uartX
2020-12-15 10:32:46 +11:00
Phillip Kocmoud
ce87b62dcc
AP_Periph: Add alternate ordering of NCP5623 LED colors
2020-12-12 14:57:35 +11:00
Tom Pittenger
68b2982cc6
AP_HAL_ChibiOS: CubeBlack/Orange-periph to use default HAL_SUPPORT_RCOUT_SERIAL
2020-12-09 07:53:09 -08:00
Tom Pittenger
2203bf2400
AP_HAL_ChibiOS: Add f303-periph default RANGEFINDER_MAX_INSTANCES 1
2020-12-09 18:05:24 +11:00
Andrew Tridgell
0c440d5675
HAL_ChibiOS: cope with flash erase in expected delay
...
when there has been a flash erase when we are definately in an
expected delay
2020-12-08 13:22:36 +11:00
Andrew Tridgell
b4de6fb56a
HAL_ChibiOS: added new option DEFAULTGPIO for hwdef.dat
...
this allows ESD issues to be avoided by pulling all unused pins low
2020-12-08 11:21:57 +11:00
Andrew Tridgell
f44e4aaefb
HAL_ChibiOS: always set STM32_DMA_REQUIRED for non-bootloader
...
this fixes an issue for uart-only AP_Periph builds
2020-12-08 10:27:27 +11:00
Andrew Tridgell
b1e7b508db
HAL_ChibiOS: added HitecMosaic
2020-12-06 16:48:08 +11:00
Andrew Tridgell
1723cf8efb
HAL_ChibiOS: reduce SPI clock on MatekH743 mpu6k to 2MHz
...
this fixes regular transfer errors
2020-12-06 13:04:52 +11:00
Tom Pittenger
e235fd311e
AP_HAL_ChibiOS: fixed comment in script file
2020-12-03 20:33:51 +11:00
Andrew Tridgell
6765265a3b
AP_Periph: switched to 1kHz clock for f303-periph
...
and use CAN RX buffer size of 64.
This makes for more efficient CPU usage on f3, and fixes an issue with
lost CAN parameter replies causing timeouts in the CAN parameter
download protocol
2020-12-03 20:00:55 +11:00
Andrew Tridgell
b289701d20
HAL_ChibiOS: removed SPI devices on f103-periph
...
these are unused and saves us a couple of k of flash
2020-12-03 15:50:50 +11:00
Phillip Kocmoud
38dd3b9209
hwdef: add mRo Control Zero Classic
2020-12-01 15:19:50 +11:00
Phillip Kocmoud
bef522387a
hwdef: add mRo Control Zero H7
2020-12-01 14:46:55 +11:00
Andrew Tridgell
cf22caa7ef
HAL_ChibiOS: raise stack limits in f303 peripherals
2020-12-01 11:14:50 +11:00
Andrew Tridgell
ba69cd72c9
HAL_ChibiOS: improved stack checking and stack display
...
display both ISR stack and thread stacks. Show total stack sizes as
well as amount of stack remaining
2020-12-01 11:14:50 +11:00
Andrew Tridgell
84eac7642b
HAL_ChibiOS: improved stack checking
2020-12-01 11:14:50 +11:00
Andrew Tridgell
c778d14fd3
HAL_ChibiOS: enable stack checking on f303 boards
2020-12-01 11:14:50 +11:00
Andrew Tridgell
573cd6db6d
HAL_ChibiOS: adjust MAIN_STACK for more ISR stack
...
we need more stack to deal with interrupt nesting between CAN, system
timer and serial interrupts
2020-12-01 11:14:50 +11:00
Andrew Tridgell
2a29b0fcf5
HAL_ChibiOS: fixed AP_Periph build with --enable-asserts
2020-12-01 11:14:50 +11:00
Andrew Tridgell
4d171ec19a
AP_HAL_ChibiOS: support uartI, allowing a total of 9 uarts
...
this allows for OTG2 on the MatekH743 board, which makes SLCAN much
easier
2020-11-30 14:09:31 +11:00
Phillip Kocmoud
c9182b39d5
hwdef: mRo Control Zero H7 OEM - update and improve uniformity
2020-11-30 08:48:36 +11:00
Phillip Kocmoud
b55920165a
hwdef: mRo Pixracer Pro - update and improve uniformity
2020-11-30 08:48:36 +11:00
Phillip Kocmoud
a379bb8fc5
hwdef: mRo Control Zero F7 update and improve uniformity
2020-11-28 20:28:22 +11:00
Andrew Tridgell
a587195912
HAL_ChibiOS: change f303-MatekGPS to 5Hz by default
2020-11-27 19:41:33 +11:00
Tom Pittenger
67405cedb2
AP_HAL_ChibiOS: add AP_BattMonitor support to CubeBlack&Orange-periph
2020-11-25 14:20:53 +11:00
斯东Stone
4990048efb
HAL_ChibiOS: Correct a typo and Update product link url for PH4-mini
2020-11-24 12:48:11 +11:00
QioTek
e4f4868d9b
HAL_ChibiOS: add QMC5883L on QioTekZealotF427
...
add QMC5883L on QioTekZealotF427
2020-11-22 06:10:34 +11:00
Marek Łukasiewicz
64f208cbec
HAL_ChibiOS: Add af_parse for CubeMX pinout csv
2020-11-18 18:39:07 +11:00