Randy Mackay
a93a0d370a
Copter: add throw mode to aux switches
2016-03-03 15:30:03 +09:00
Randy Mackay
dca89e7fe7
Copter: throw static variables moved to global scope
2016-03-03 12:18:27 +09:00
Randy Mackay
24cfbeebd0
Copter: add throw_exit
2016-03-03 12:18:25 +09:00
Randy Mackay
959c0eccfd
Copter: reject changing to throw mode while armed
2016-03-03 12:18:23 +09:00
Randy Mackay
20b6688e77
Copter: add throw to FLTMODE param descriptions
2016-03-03 12:18:20 +09:00
Paul Riseborough
1aade494fc
AP_State: enable use of motor interlock during throw mode
2016-03-03 12:18:18 +09:00
Paul Riseborough
a7b69366a1
Copter: Add flight mode for throw launch
...
The is commit adds a new flight mode called 'Throw' to Copter that enables the copter to be thrown into the air to start motors. This mode can only be netered when the copters EKF has a valid position estimate and goes through the following states
Throw_Disarmed - The copter is disarmed and motors are off.
Throw_Detecting - The copter is armed, but motors will not spin unless THROW_MOT_START has been set to 1. The copter is waiting to detect the throw. A throw with an upwards velocity of at least 50cm/s is required to trigger the detector.
Throw_Uprighting - The throw has been detected and the copter is being uprighted with 50% throttle to maximise control authority. This state transitions when the copter is within 30 degrees of level.
Throw_HgtStabilise - The copter is kept level and height is stabilised about the target height which is 3m above the height at which the throw release was detected. This state transitions when the height is no more than 0.5m below the demanded height.
Throw_PosHold - The horizontal motion is arrested and the copter is kept at a constant position and height.
2016-03-03 12:18:13 +09:00
Randy Mackay
e428abde42
Copter: enable precision landing by default
2016-02-29 19:17:20 +09:00
dgrat
5148e41c1a
AP_Math: Cleaned macro definitions
...
Moved Definitions into a separate header. Replaced PI with M_PI and
removed the M_PI_*_F macros.
2016-02-27 02:51:33 -03:00
Randy Mackay
077999d2aa
Copter: 3.3.3 release notes
2016-02-24 11:03:25 +09:00
Tom Pittenger
6568402b28
Copter: convert to using static send_statustext
...
- no more MSG_STATUSTEXT
- TODO: replace calls to gcs_send_text and gcs_send_text_fmt to GCS_MAVLINK::send_statustext()
2016-02-24 09:18:06 +11:00
Tom Pittenger
09dd2a1b3d
Copter: use set_dataflash() for static logging
2016-02-24 09:18:05 +11:00
Lucas De Marchi
09e7cbe005
ArduCopter: remove unused CMAKE define
...
This is a leftover from previos cmake build system.
2016-02-19 19:15:39 -02:00
Peter Barker
44c63b8873
Copter: move use of defines after config.h and defines.h
2016-02-19 12:34:23 -02:00
Leonard Hall
8e790d3f91
Copter: autotune adjustment for large copters
2016-02-18 20:49:12 +09:00
Jonathan Challinger
e09e9a313e
Copter: interpret MAV_FRAME_GLOBAL_RELATIVE_ALT as MAV_FRAME_GLOBAL_RELATIVE_ALT_INT
2016-02-06 09:36:51 +09:00
Jonathan Challinger
0b8162aa0d
Copter: add support for COMMAND_INT DO_SET_ROI
2016-02-06 09:36:41 +09:00
Randy Mackay
a1b0a53e17
Copter: remove AP_Limits from comments
2016-02-04 09:55:07 +09:00
Randy Mackay
a77dd59dc6
Copter: single and coax copters become mav_type quadrotor
2016-01-30 17:15:28 +09:00
Andrew Tridgell
5be21cc178
ArduCopter: log a picture if AP_Camera::control() returns true
2016-01-29 10:01:51 +11:00
Andrew Tridgell
4efb9bd785
ArduCopter: update for changed AP_Camera API
2016-01-29 09:19:43 +11:00
Dario Lindo Andres
90bf13279b
ArduCopter: Added precise camera trigger logging
...
Added update_trigger and check_digital_pin functions
added camera trigger precise time mark
detect camera feedback pin status
added support for simple digital pin
included support for digital pin. Already included in
APMrover2.
added support for TRIGGER MSG
corrected according to defines.h
2016-01-29 09:19:43 +11:00
Randy Mackay
5e24443a0a
Copter: 3.3.3-rc2 release notes
2016-01-28 14:19:33 +09:00
Randy Mackay
27ed9e1561
Copter: allow mount to be disabled
2016-01-23 10:35:48 +09:00
Jonathan Challinger
22c3397657
Copter: make AP_Mount calls required by AP_Mount_SoloGimbal
2016-01-23 10:35:42 +09:00
Jonathan Challinger
5f610fdcba
Copter: support SET_POSITION_TARGET with WGS84 altitudes
2016-01-23 10:29:04 +09:00
Jonathan Challinger
82322144ee
Copter: remove unnecessary header file
2016-01-23 09:42:08 +09:00
Gustavo Jose de Sousa
c2e3f05dbf
waf: ardupilotwaf: prefix build context methods with ap_
...
It helps to distinguish between things from waf and things from ardupilotwaf.
2016-01-22 20:10:29 -02:00
Gustavo Jose de Sousa
e9d3dc9e72
waf: vehicles and antennatracker: use methods from bld
...
Instead of from ardupilotwaf.
2016-01-22 20:10:29 -02:00
Gustavo Jose de Sousa
cf432e8b3e
waf: ardupilotwaf: rename vehicle_stlib to ap_stlib
...
That function is not only for vehicles.
2016-01-22 20:10:28 -02:00
Gustavo Jose de Sousa
a35c0d48b0
waf: ardupilotwaf: rename program to ap_program
...
Make the rename so that there is no name clashes when defining it as a taskgen
method.
2016-01-22 20:10:28 -02:00
Lucas De Marchi
7f04e0106e
waf: change binary names
...
APMrover2 -> ardurover
AntennaTracker -> antennatracker
ArduCopter -> arducopter
ArduPlane -> arduplane
2016-01-18 16:56:08 -02:00
Gustavo Jose de Sousa
17e5d99509
waf: allow partial builds with new mavlink as submodule
...
The task generator for the mavlink headers is given a name 'mavlink' and is
added as a dependency to all local static libraries, because all of them use
sources that include mavlink headers. It would be nice to have a good way to
detect sources that use mavlink headers or to declare list of libraries that
use the headers, so that the dependency could be added automatically.
Additionally, there's a minor change in syntax for the task generator: using
strings directly instead of lists.
2016-01-15 07:28:48 +11:00
Randy Mackay
d989cf29e2
Copter: cancelling no-gps-land switches to AltHold
...
Previously it could switch to Loiter
2016-01-14 15:22:02 +09:00
Randy Mackay
dc2ec5db18
Copter: add Bitmask param description for PILOT_THR_BHV
2016-01-14 15:21:59 +09:00
Randy Mackay
2c5f9422d4
Copter: log event if pilot cancels land
...
Also add definition for throttle value that cancels land
2016-01-14 15:21:57 +09:00
Jonathan Challinger
8965185587
Copter: add "high throttle cancels landing" option
2016-01-14 15:21:54 +09:00
Randy Mackay
9e0cd7a5cf
Copter: allow arming in Drift and Sport modes
2016-01-14 10:13:45 +09:00
Derek Ma
3751dbef91
ArduCopter: include precision landing sensor in mavlink system status
...
Set MAV_SYS_STATUS_SENSOR_VISION_POSITION bit in onboard_control_sensors_present, onboard_control_sensors_enabled and onboard_control_sensors_health based on the status of precision landing sensor.
2016-01-14 09:36:24 +09:00
Randy Mackay
97725c3187
Copter: add DISALLOW_GCS_MODE_CHANGE_DURING_RC_FAILSAFE to APM_Config.h
...
This makes it easier for us to find the definition without searching through the code
2016-01-12 19:51:43 +09:00
Jonathan Challinger
cc1f27ad95
Copter: add DISALLOW_GCS_MODE_CHANGE_DURING_RC_FAILSAFE option
2016-01-12 19:49:17 +09:00
Jonathan Challinger
5cc969f01b
Copter: simplify battery and radio failsafe logic
2016-01-12 18:23:01 +09:00
squilter
91187899fd
Copter: initialize capabilities earlier
2016-01-12 18:13:15 +09:00
Randy Mackay
89c147184f
Copter: log guided mode targets
2016-01-12 18:04:59 +09:00
Randy Mackay
6a67ad706c
Copter: add Relays to aux switch parameter descriptions
...
Also fix formatting of new options in switches.cpp
No functional change
2016-01-08 12:13:37 +09:00
Gavin Mogensen
3918987507
Copter: aux switches for relays 2,3 and 4
2016-01-08 12:12:47 +09:00
Randy Mackay
e216f814c5
Copter: add CAL_ALWAYS_REBOOT to APM_Config.h
2016-01-08 12:01:51 +09:00
Jonathan Challinger
d916413a15
Copter: add CAL_ALWAYS_REBOOT option
2016-01-08 11:58:41 +09:00
Randy Mackay
e16cccf218
Copter: RTL config formatting fix
...
No functional change
2016-01-07 17:29:54 +09:00
Randy Mackay
2927d6b2df
Copter: add RTL_CONE_SLOPE param description values
2016-01-07 17:22:35 +09:00
Jonathan Challinger
3800c66f07
Copter: add RTL_CONE_SLOPE
2016-01-07 17:22:33 +09:00
Jonathan Challinger
dcd16696a2
Copter: refactor RTL to compute full path on initialization
2016-01-07 17:22:31 +09:00
Randy Mackay
85b4288990
Copter: update 3.3.3-rc1 release notes
2016-01-07 14:30:06 +09:00
Robert Lefebvre
bfa69ed543
Copter: 3.3.3-rc1 release notes
2016-01-07 14:30:03 +09:00
Randy Mackay
15e673f5ae
Copter: fix precland parameter description prefix
...
Thanks to Thomas Stone for finding this
No functional change
2016-01-07 12:55:44 +09:00
Andrew Tridgell
907a680a3b
Copter: always call load_all
...
this ensures defaults file works on first start after erase
2016-01-07 09:33:00 +11:00
Andrew Tridgell
74883ddaeb
Copter: use set_range_in() for tuning channel
...
this allows channel 6 to be used for something else for output
2016-01-04 11:23:33 +09:00
Andrew Tridgell
5c94b61f49
Copter: support up to 14 input channels for all boards
2016-01-04 08:22:51 +11:00
Randy Mackay
cfff57257e
Copter: shorten precision landing param prefix
2015-12-31 15:30:39 +09:00
Randy Mackay
1155b1f557
Copter: remove precision landing PI controller
...
This controller has been moved into the precision landing class
2015-12-31 15:30:36 +09:00
Jonathan Challinger
0e85f55cfc
Copter: remove OF_LOITER entirely
2015-12-31 14:27:22 +09:00
Tom Pittenger
d969154391
Copter: incorporate AP_ADSB function rename
...
- non-functional change
2015-12-31 15:36:49 +11:00
Robert Lefebvre
dc1846447e
Copter: ensure Ch6 tuned value does not go out of range
2015-12-31 12:41:29 +09:00
Robert Lefebvre
e2879b375d
Copter: fix Ch6 Tuning when no RC Receiver on boot
2015-12-31 12:41:11 +09:00
Jonathan Challinger
93fc595d4d
Copter: check if compass cal requires reboot
2015-12-31 12:32:57 +09:00
pepevalbe
3b3205304b
Copter: added group parameter for AP_Notify library
2015-12-31 11:33:08 +09:00
Jonathan Challinger
5cd0ca851a
Copter: check if accel cal requires reboot
2015-12-29 10:46:35 -08:00
bugobliterator
9a976963aa
Copter: support AP_AccelCal
2015-12-29 10:46:34 -08:00
Lucas De Marchi
e5e8bf3203
ArduCopter: don't link unused AP_Curve library
2015-12-28 10:23:23 -02:00
Randy Mackay
6ac48b4dac
Copter: minor formatting fix
2015-12-28 14:01:12 +09:00
Jonathan Challinger
750cacc875
Copter: barometer ground effect compensation
2015-12-28 13:51:27 +09:00
Lucas De Marchi
a096703b06
Global: don't link with AP_Progmem
...
AP_Progmem is not used anymore.
2015-12-27 15:58:12 -02:00
Andrew Tridgell
4dd8714880
Copter: changed to Hz based task table
2015-12-27 14:57:21 +09:00
Randy Mackay
1f3fa3e272
Copter: formatting fixes to arming checks
2015-12-24 14:11:38 +09:00
Jonathan Challinger
933ffb2b10
Copter: move prearm logic to arming_checks.cpp
2015-12-24 14:10:23 +09:00
Andrew Tridgell
d14056fa1e
Copter: fixed build warnings
2015-12-20 17:55:40 +11:00
Andre Kjellstrup
eb0daee4b3
ArduCopter: Camera options for better camera control
...
All on one because they would not pass autotest if split up.
2015-12-18 18:16:11 +11:00
Jonathan Challinger
cee706edd9
Copter: reflect renamed function in AP_AHRS
2015-12-18 18:08:37 +11:00
Julien BERAUD
f897356fd9
Copter: Optflow constructor update
...
AHRS passed as param
2015-12-18 17:56:06 +11:00
Gustavo Jose de Sousa
dc81a2410e
waf: use single entry point for make wrappers
2015-12-10 10:40:34 +09:00
Jonathan Challinger
709fcf37cc
Copter: call renamed functions in AC_AttitudeControl
2015-12-09 19:58:49 +09:00
Jonathan Challinger
a0b36e0eff
Copter: use renamed functions in AC_AttitudeControl
2015-12-09 19:58:47 +09:00
Jonathan Challinger
0fe0787265
Copter: call renamed AC_AttitudeControl functions
2015-12-09 19:58:43 +09:00
Jonathan Challinger
dfab21171b
Copter: call renamed functions in AC_AttitudeControl
2015-12-09 19:58:37 +09:00
Jonathan Challinger
9d8b0f3d58
Copter: call renamed functions in AC_AttitudeControl
2015-12-09 19:58:30 +09:00
Jonathan Challinger
b906767a45
Copter: change acro to use modified attitude_control functions
2015-12-09 19:58:28 +09:00
Robert Lefebvre
9848d05a9d
Copter: Always send RPM data when sensor is enabled
2015-12-08 08:25:18 +11:00
Robert Lefebvre
652283a570
Copter: Helicopters to force descent when motor is shut off
2015-12-07 14:51:39 +09:00
DonLakeFlyer
c8cc83505b
Copter: return success or failure of get home position
2015-12-07 12:33:15 +09:00
Robert Lefebvre
f55effa562
Copter: remove unnecessary frame ifdef
2015-12-04 14:18:00 +09:00
Lucas De Marchi
164b9f345c
ArduCopter: remove unused AP_ADC_AnalogSource
2015-12-03 13:32:45 +11:00
Peter Barker
826912c3e4
Copter: DataFlash-over-MAVLink support
2015-12-03 13:21:51 +11:00
Peter Barker
f57d237181
Copter: support multiple simultaneous backends
2015-12-03 13:21:51 +11:00
Gustavo Jose de Sousa
7837bbfd81
waf: add a make wrappers
2015-12-03 07:54:32 +11:00
Gustavo Jose de Sousa
f27b8869a6
waf: add missing AP_ADSB library to ArduCopter
2015-12-03 07:54:32 +11:00
Caio Marcelo de Oliveira Filho
6e7b73610d
waf: add waf support
2015-12-03 07:54:30 +11:00
Randy Mackay
d9baf334c4
Copter: remove unused definitions
2015-12-02 14:56:24 +09:00
Lucas De Marchi
83ff0476a8
ArduCopter: fix signed/unsigned comparison warning
...
commands_logic.cpp: In member function 'bool
Copter::verify_within_distance()':
commands_logic.cpp:770:21: warning: comparison between signed and
unsigned integer expressions [-Wsign-compare]
if (wp_distance < MAX(condition_value,0)) {
^
2015-12-01 16:28:18 -02:00
Lucas De Marchi
2591261af6
Global: rename min and max macros to uppercase
...
The problem with using min() and max() is that they conflict with some
C++ headers. Name the macros in uppercase instead. We may go case by
case later converting them to be typesafe.
Changes generated with:
git ls-files '*.cpp' '*.h' -z | xargs -0 sed -i 's/\([^_[:alnum:]]\)max(/\1MAX(/g'
git ls-files '*.cpp' '*.h' -z | xargs -0 sed -i 's/\([^_[:alnum:]]\)min(/\1MIN(/g'
2015-12-01 16:28:09 -02:00
Randy Mackay
d9a14d05f4
Copter: 3.3.2 release notes
2015-12-01 15:12:29 +09:00
Leonard Hall
6eca767db0
Copter: reduce autotune min D param default to 0.001
2015-11-30 11:21:54 +09:00
Randy Mackay
19f5c8f209
Copter: remove debug comments
2015-11-27 16:17:00 +09:00
Luis Vale Gonçalves
3199829d45
Copter: revisions to text strings sent to GCS
2015-11-27 16:16:58 +09:00
Andrew Tridgell
f5d73a9d10
Copter: fixed deadzone for acro with extgyro and no flybar
2015-11-27 15:24:43 +09:00
Randy Mackay
06880e8b04
Copter: fix input_manager init order to resolve compiler warning
2015-11-27 15:18:17 +09:00
Randy Mackay
4eafd90864
Copter: remove old comment
2015-11-27 15:02:24 +09:00
Randy Mackay
e6f8d812d3
Copter: adsb handling simply logs error to dataflash
2015-11-27 15:02:20 +09:00
Randy Mackay
4ef53427f2
Copter: allow ADSB to be disabled
2015-11-27 15:02:17 +09:00
Tom Pittenger
34d6d985e9
Copter: Add support for ADS-B
2015-11-27 15:02:15 +09:00
Randy Mackay
802ced201d
Copter: 3.3.2-rc2 release notes
2015-11-21 14:34:30 +09:00
Robert Lefebvre
90416ac81d
Copter: 3.3.2-rc1 release notes
2015-11-21 14:34:27 +09:00
Andre Kjellstrup
c2a810d72a
Copter: update RTL altitude param description
2015-11-21 12:44:10 +09:00
Caio Marcelo de Oliveira Filho
c7acc46d09
Copter: use millis/micros/panic functions
2015-11-20 12:26:31 +09:00
Randy Mackay
50e3c2ce3a
Copter: minor comment updates
...
No functional change
2015-11-18 22:12:44 +09:00
bugobliterator
945bdee452
Copter: PILOT_VELZ_MAX and PILOT_ACCEL_Z take effect immediately
2015-11-18 22:12:41 +09:00
Randy Mackay
674bedd867
Copter: acro sets alt target to zero for reporting
2015-11-18 21:48:34 +09:00
Jonathan Challinger
a5e4f64b20
Copter: refuse to enter manual throttle modes while landed with throttle high
2015-11-18 21:48:27 +09:00
Randy Mackay
b2b8dcb8ff
Copter: guided calls velocity controller at 400hz
...
velocity controller internally updates xy-axis at 50hz, z-axis at 400hz
2015-11-18 13:31:22 +09:00
Randy Mackay
1b29a1af46
Copter: consolidate setting of using-iterlock state
2015-11-17 09:02:31 +09:00
Andrew Tridgell
0c92331762
Copter: fixed build for SITL changes
2015-11-16 17:57:36 +11:00
Jonathan Challinger
5086168b03
Copter: add RTL_SPEED parameter
2015-11-16 10:20:32 +09:00
Andrew Tridgell
8f4ce7f20b
build: removed all nocore.inoflag files
...
these were APM2 specific
2015-11-16 08:05:17 +11:00
Randy Mackay
05246ea0c7
Copter: fix RTL compile error when rally disabled
...
Thanks to derekxm for finding this
2015-11-14 12:39:23 +09:00
Randy Mackay
731c44d053
Copter: allow terrain to be excluded from build
2015-11-14 12:38:47 +09:00
Robert Lefebvre
2b111c2bd6
Copter: fix Helicopter no-build issue
...
Conflict with another recent change to disarm counter
2015-11-14 10:32:58 +09:00
Andrew Tridgell
9214b85cf1
Copter: fixed path for AC_InputManager for heli
2015-11-13 13:49:25 +11:00
Fredrik Hedberg
a6d2e0d4df
Copter: Don't auto-disarm helicopters if rotor is still spinning.
2015-11-13 11:17:43 +09:00
Robert Lefebvre
02b8dd5ffd
Copter: Heli to set hover roll trim scalar
2015-11-12 19:37:36 +09:00
Robert Lefebvre
5cc4f41d85
Copter: Helicopter: to use new Stab_Col and Acro_Col functions.
2015-11-12 19:37:23 +09:00
Robert Lefebvre
34fb600c4f
Copter: Utilize Input Manager Class
2015-11-12 19:37:22 +09:00
Robert Lefebvre
afcc304cbf
AC_InputManager: Initial class creation
2015-11-12 19:37:21 +09:00
Robert Lefebvre
7ad623dc70
Copter: Helicopter, fix so servos move after arming in Acro and Stabilize.
2015-11-12 19:37:16 +09:00
Robert Lefebvre
2632a2e348
Copter: Rework arming proceedures for interlock/Estop
...
to fix race condition.
2015-11-12 19:37:15 +09:00
Jonathan Challinger
6524222397
Copter: adapt auto disarm check to use a timer
2015-11-09 15:34:41 +09:00
Jonathan Challinger
05e533e6fc
Copter: don't accept disarm commands in stabilize and acro unless also landed
2015-11-07 11:07:14 +09:00
lvale
549695181c
Copter: revised and uniformization of severity messages
2015-11-05 12:20:49 +09:00
Randy Mackay
420b1ca715
Copter: minor comment and order change to takeoff
...
No functional change
2015-11-04 20:49:25 +09:00
Jonathan Challinger
082c1f77fb
Copter: soften takeoff
2015-11-04 20:49:22 +09:00
Lucas De Marchi
030fd046c7
ArduCopter: remove check for MAVLINK_COMM_NUM_BUFFERS
2015-11-04 12:14:15 +11:00
Lucas De Marchi
e0639ac029
ArduCopter: remove check for AVR CPUs
...
Remove the checks for HAL_CPU_CLASS > HAL_CPU_CLASS_16 and
HAL_CPU_CLASS >= HAL_CPU_CLASS_75. Corresponding dead code will be
removed on separate commits.
2015-11-04 12:14:15 +11:00
Lucas De Marchi
3e889b005f
ArduCopter: remove checks for HAL_BOARD_APM2 and HAL_BOARD_APM1
2015-11-04 12:14:13 +11:00
Andrew Tridgell
99b448d1bb
Copter: make EV log messages critical
...
these should be a high priority
2015-11-02 20:29:10 +11:00
Lucas De Marchi
f4e71affa1
ArduCopter: fix wrong printf format for 32 bits
...
Heading is a 32 bits value, so use %u.
2015-10-30 14:35:36 +09:00
Lucas De Marchi
e9b6c76454
ArduCopter: fix wrong printf format for 32 bits
...
"micros() - before" doesn't return a long value. Use "%u".
2015-10-30 14:35:34 +09:00
Lucas De Marchi
c397e550e2
ArduCopter: fix warning due to wrong type
...
"%s" expects a string. This works since the string in the struct is the
first member so it's harmless.
2015-10-30 14:35:33 +09:00
Lucas De Marchi
5244559010
Minimize AP_Progmem.h includes
...
Most of AP_Progmem is already gone so we can stop including it in most
of the places. The only places that need it are the ones using
pgm_read_*() APIs.
In some cases the header needed to be added in the .cpp since it was
removed from the .h to reduce scope. In those cases the headers were
also reordered.
2015-10-30 14:35:32 +09:00
Lucas De Marchi
1b07dabeb7
Replace prog_char and prog_char_t with char
...
prog_char and prog_char_t are now the same as char on supported
platforms. So, just change all places that use them and prefer char
instead.
AVR-specific places were not changed.
2015-10-30 14:35:30 +09:00
Lucas De Marchi
4ab9821624
Replace use of Log_Write_Message_P() with Log_Write_Message()
2015-10-30 14:35:28 +09:00
Lucas De Marchi
20c6ffc5e3
Replace use of UARTDriver::printf_P() with UARTDriver::printf()
...
This also starts to show warnings on places that were already using
wrong printf format strings.
2015-10-30 14:35:25 +09:00
Lucas De Marchi
6f4904189b
Replace use of println_P() with println()
2015-10-30 14:35:22 +09:00
Lucas De Marchi
a964ac38ec
Replace use of print_P() with print()
2015-10-30 14:35:21 +09:00
Lucas De Marchi
89fc4f4b62
Replace use of send_text_P() with send_text()
2015-10-30 14:35:17 +09:00
Lucas De Marchi
831d8acca5
Remove use of PROGMEM
...
Now variables don't have to be declared with PROGMEM anymore, so remove
them. This was automated with:
git grep -l -z PROGMEM | xargs -0 sed -i 's/ PROGMEM / /g'
git grep -l -z PROGMEM | xargs -0 sed -i 's/PROGMEM//g'
The 2 commands were done so we don't leave behind spurious spaces.
AVR-specific places were not changed.
2015-10-30 14:35:16 +09:00
Lucas De Marchi
6f0db45b57
Replace use of strcasecmp_P() with strcasecmp()
2015-10-30 14:35:08 +09:00
Lucas De Marchi
84da1f5039
Rename gcs_send_text_P to gcs_send_text
2015-10-30 14:35:07 +09:00
Lucas De Marchi
84d5fb006f
Remove use of Util::{v,}snprintf_P()
...
These are now the same function as Util::snprintf().
2015-10-30 14:35:05 +09:00
Lucas De Marchi
2c38e31c93
Remove use of PSTR
...
The PSTR is already define as a NOP for all supported platforms. It's
only needed for AVR so here we remove all the uses throughout the
codebase.
This was automated with a simple python script so it also converts
places which spans to multiple lines, removing the matching parentheses.
AVR-specific places were not changed.
2015-10-30 14:35:04 +09:00
Randy Mackay
606a0e0d0b
Copter: set jerk to default for circle and guided
2015-10-29 12:10:49 +09:00
Leonard Hall
411e75b917
Copter: feed forward only used for AltHold, Loiter, PosHold
...
land modes use non-feedforward alt hold
2015-10-28 20:21:54 +09:00
Randy Mackay
b49fda4a94
Copter: remove rotor spinning arming check from TradHeli
2015-10-27 09:14:39 +09:00
Jonathan Challinger
da3961e4a6
Copter: support MAV_CMD_DO_SEND_BANNER
2015-10-26 16:28:57 +09:00
Randy Mackay
02c4fdf519
Copter: 3.3.1 release notes
2015-10-26 11:32:28 +09:00
Jonathan Challinger
5486be34b1
Copter: use configured function to determine if heli_servo_rsc has been configured
2015-10-26 11:15:54 +11:00
Jonathan Challinger
28f55766fd
Copter: use configured to check whether radio has been calibrated
2015-10-26 11:15:54 +11:00
Caio Marcelo de Oliveira Filho
bf6d1afd59
ArduCopter: include SITL only for SITL board
...
Include board-specific files only when the board is used. Since these
should be exceptional cases, let the includer handle the ifdef instead
of putting ifdefs in every platform-specific header.
In the future we should evaluate whether the HAL for the board should
instantiate this.
2015-10-22 13:36:14 -02:00
Caio Marcelo de Oliveira Filho
49a42dc985
SITL: use a SITL namespace
2015-10-22 11:04:42 -02:00
Caio Marcelo de Oliveira Filho
05ae7858e8
Copter: explicitly ask for always using EKF
...
When instantiating AP_AHRS_NavEKF for ArduCopter, explicitly pass the
flag to always use the EKF.
The motivation is to move vehicle specifc code out of the general
libraries. This patch shouldn't change behavior.
2015-10-21 11:01:11 +11:00
Peter Barker
080c31c15e
Copter: use simple log entry numbers to download logs
2015-10-21 10:50:32 +11:00
Lucas De Marchi
09f185eb5e
ArduCopter: remove check for max INS instances
...
For all supported boards the maximum number of instances is 3.
2015-10-21 10:05:17 +11:00
Caio Marcelo de Oliveira Filho
3e3f13659d
ArduCopter: implement HAL::Callbacks
...
Also removes includes for each board since they are not necessary
anymore.
2015-10-21 09:16:09 +11:00
Caio Marcelo de Oliveira Filho
ec52df991c
build: compile only the HAL files needed by the board
...
Instead of requiring every program to specify the HAL related modules,
let the build system do it (in practice everything we compiled depended
on HAL anyway). This allow including only the necessary files in the
compilation.
2015-10-21 09:16:07 +11:00
Caio Marcelo de Oliveira Filho
2e464a53c2
AP_HAL: make code not depend on concrete HAL implementations
...
The switching between different AP_HAL was happening by giving different
definitions of AP_HAL_BOARD_DRIVER, and the programs would use it to
instantiate.
A program or library code would have to explicitly include (and depend)
on the concrete implementation of the HAL, even when using it only via
interface.
The proposed change move this dependency to be link time. There is a
AP_HAL::get_HAL() function that is used by the client code. Each
implementation of HAL provides its own definition of this function,
returning the appropriate concrete instance.
Since this replaces the job of AP_HAL_BOARD_DRIVER, the definition was
removed.
The static variables for PX4 and VRBRAIN were named differently to avoid
shadowing the extern symbol 'hal'.
2015-10-21 09:16:07 +11:00
Randy Mackay
3f9d62d6b4
Copter: 3.3.1-rc1 release notes
2015-10-20 16:00:41 +09:00
Randy Mackay
1858a0544f
Copter: guided takeoff checks auto-armed status
...
This resolves an edge case in which the vehicle could takeoff with auto-armed false
2015-10-20 15:51:55 +09:00
Paul Riseborough
75a61df627
Copter: Enable access to EKF2 height tuning
2015-10-20 15:21:38 +11:00
Paul Riseborough
d0aba09503
Copter: Access EKF healthy through AHRS object
...
Enables EKF2 use
2015-10-20 15:21:38 +11:00
Paul Riseborough
19785c1033
Copter: Access EKF origin through AHRS object
...
Enables EKF2 use
2015-10-20 15:21:38 +11:00
Paul Riseborough
7c6b31b585
Copter: Access EKF variance checks through AHRS object
...
Supports flight using EKF2
2015-10-20 15:21:38 +11:00
Randy Mackay
d03489263d
Copter: remove gyro cal on first arming
2015-10-19 12:00:41 +09:00
Jonathan Challinger
598925f8d2
Copter: EKF failsafe action always Land if RC failsafe active
2015-10-18 10:06:05 +09:00
José Roberto de Souza
c581a702a0
ArduCopter: Fix typo: auxiliar to auxiliary
2015-10-16 10:16:24 +11:00
Gustavo Jose de Sousa
fb5320bb25
ArduCopter: use compass get_{field,offsets}() functions
...
Both functions are equivalent, so we're going to simply use
get_{field,offsets}() instead of get_{field,offsets}_milligauss().
2015-10-15 19:56:05 +09:00
Randy Mackay
9b80ab18ae
Copter: position_ok when optical flow ok
...
Previously the GPS based absolute position was required
This allows using optical flow in all flight modes
2015-10-14 12:01:41 +09:00
vooon
f3cbbef418
Copter: fix guided attitude type_mask check
2015-10-10 22:04:51 +09:00
Randy Mackay
a142688fea
Copter: guided attitude timeout to 1sec
...
Also add set-attitude-target capabilities flag
Thanks to Fredia and Sebastian for noticing these issues!
2015-10-10 22:04:48 +09:00
Randy Mackay
e20038a453
Copter: support SET_ATTITUDE_TARGET in guided mode
2015-10-09 12:15:38 +09:00
Randy Mackay
1dcf58bc20
Copter: support set-home-position message
2015-10-03 12:51:32 +09:00
Randy Mackay
330961b524
Copter: send home position when home is set or get-home msg received
2015-10-03 12:50:45 +09:00
Randy Mackay
26329c5a03
Copter: 3.3 release notes
2015-09-29 10:25:43 +09:00
Andrew Tridgell
38bae40ca0
Copter: use ahrs.send_ekf_status_report()
2015-09-29 10:59:24 +10:00
Andrew Tridgell
5cb088fe14
Copter: pass display_failure to AP_Motors heli check
2015-09-25 12:30:34 +10:00
Andrew Tridgell
94eb23ef56
Copter: consider flight to be dynamic at greater than 2m above ground
...
use rangefinder to switch to dynamic flight if possible
2015-09-25 12:30:34 +10:00
Andrew Tridgell
49ee4b7965
Copter: tell motors library when to use acro gyro gain
2015-09-25 12:30:34 +10:00
Andrew Tridgell
1c26ed0fca
Copter: fixed deadzone handling for external tail gyro
...
when using an external tail gyro on a flybar heli the stick input
should be directly passed to output. This patch fixes the use of
deadzone in that passthrough.
It also makes the tail handling consistent with roll and pitch
handling, by not using ACRO_YAW_P when in tail pass-through.
Finally it also fixes deadzone handling for roll and pitch, and
removes the unnecessary get_pilot_desired_yaw_rate() that has a
different prototype from the one used in the rest of the code
2015-09-25 12:05:43 +10:00
Randy Mackay
cdd4570f02
Copter: fix init order of ekfYawReset_ms
2015-09-24 16:57:50 +09:00
Randy Mackay
317779f976
Copter: check_ekf_yaw_reset uses ahrs method
2015-09-24 16:57:47 +09:00
Jonathan Challinger
e47175862a
Copter: use modified getLastYawResetAngle function
2015-09-24 16:57:44 +09:00
Andrew Tridgell
2470cf0e76
Copter: use resetHeightDatum() and getLastYawResetAngle()
2015-09-23 17:47:11 +10:00
Andrew Tridgell
053194fd51
Copter: added EK2_* parameters and EKF2 instance
2015-09-23 11:56:33 +10:00
Randy Mackay
96d6b8eb61
Copter: 3.3-rc12 release notes
2015-09-22 15:17:23 +09:00
Randy Mackay
57c5840f0d
Copter: add EKF attitude arming check
2015-09-21 17:06:39 +09:00
Randy Mackay
f3d4b20a80
Copter: calibrate gyros during accel calibration
2015-09-21 17:06:37 +09:00
Randy Mackay
01c0b20930
Copter: calibrate gyros depending on INS GYR_CAL parameter
2015-09-21 17:06:34 +09:00
KiwiHC16
004c5b8416
Copter: mission_start always restarts mission
2015-09-16 17:17:20 +09:00
Stewart Loving-Gibbard
985be6dd86
Copter: Adding Logging of RSSI data.
2015-09-16 16:41:43 +09:00
Randy Mackay
0f55b2a0eb
Copter: replace vehicle compass consistency check
2015-09-16 15:13:38 +09:00
squilter
30ed2508d6
Copter: Support do_digicam_x via command_long
2015-09-16 13:06:49 +09:00
Randy Mackay
a403e5aef0
Copter: fix severity of super simple message to GCS
2015-09-12 12:35:42 +09:00
Ivale
6c74981010
Copter: report simple mode status to GCS as text
2015-09-12 12:28:58 +09:00
Daniel Nugent
3a7036fd67
Copter: pass LANDING_TARGET message to precland lib
2015-09-11 20:56:10 +09:00
Daniel Nugent
9fe3abf5ca
Copter: precision landing uses sonar alt if available
2015-09-11 20:56:09 +09:00
Randy Mackay
cf6d0db0f1
Copter: 3.3-rc11 release notes
2015-09-10 14:54:55 +09:00
Peter Barker
1103451d36
Copter: ensure 10% free space when initialising logging
2015-09-09 12:22:36 +10:00
Randy Mackay
8efc02fe0c
Copter: delay for 200ms instead of 50ms before reboot
2015-09-09 10:39:56 +09:00
Jonathan Challinger
1fbdf11eca
Copter: set firmware_update flag instead of event
2015-09-09 10:39:55 +09:00
Staroselskii Georgii
68e0d57998
Copter: make Copter use milligauss
...
The telemetry and and logging is still in compass units, though. This
way, users won't need to recalibrate their compasses.
2015-09-09 10:38:16 +10:00
Andrew Tridgell
d6b244670b
Copter: fix for changed AP_RangeFinder API
2015-09-08 16:46:52 +10:00
Andrew Tridgell
dff9fe9cb2
Copter: use prearm_failure_reason()
2015-09-08 16:07:33 +10:00
Leonard Hall
0129110502
Copter: limit throttle mid to throttle min + 50
2015-09-07 18:10:28 +09:00
Leonard Hall
6b01c1117f
Copter: keep thr-mix at min when landed
2015-09-07 18:10:25 +09:00
Randy Mackay
0eaf815411
Copter: guided mode vel controller integrates althold lean limit
...
Note it does not yet actually limit the lean angles based on throttle
2015-09-07 15:10:13 +09:00
Leonard Hall
543f6fdcd4
Copter: AltHold limits lean angle to maintain altitude
...
get_pilot_desired_lean_angles function now takes angle max parameter but
all flight modes except AltHold simply pass in the ANGLE_MAX parameter
meaning no functional change for them
2015-09-07 15:10:12 +09:00
Leonard Hall
61d6c44e3b
Copter: tricopter yaw rate filter to 100hz
2015-09-07 12:30:39 +09:00
Randy Mackay
dc4923a88d
Copter: suppressing comment for switch case fall through
2015-09-06 16:01:33 +09:00
Randy Mackay
5e38adfae3
Copter: remove support for configure as command long
...
Also protect mount calls with MOUNT definition
2015-09-06 16:01:21 +09:00
squilter
8320c06700
Copter: Support do-mount-control via command-long
2015-09-06 16:01:16 +09:00
Andrew Tridgell
fdb1cc38b0
Copter: removed redundent copter dereference
2015-09-03 16:59:24 +10:00
Siddharth Bharat Purohit
347d1f0a25
Copter: use handle message function for compass cal from compass library
2015-09-03 16:59:14 +10:00
Siddharth Bharat Purohit
9cf2998bba
Copter: update send text severity for compass cal
2015-09-03 16:59:13 +10:00
Jonathan Challinger
1dc373fa20
Copter: correct compile errors after compass cal merge
2015-09-03 16:59:13 +10:00
Jonathan Challinger
7d67a00aa3
Copter: add compass_cal update function
2015-09-03 16:59:12 +10:00
Jonathan Challinger
eec5c2a5eb
Copter: send NACK if compass.start_calibration_all fails
2015-09-03 16:59:12 +10:00
Jonathan Challinger
2864d58474
Copter: refuse to start mag cal if armed
2015-09-03 16:59:12 +10:00
Jonathan Challinger
fa6bfee433
Copter: add arming check for compass calibration running
2015-09-03 16:59:12 +10:00
Jonathan Challinger
3739318d2f
Copter: Hook up compass calibrator
2015-09-03 16:59:11 +10:00
Jonathan Challinger
ee1209c03f
Copter: run compass_accumulate at 100hz
2015-09-03 16:59:09 +10:00
Peter Barker
51a761656e
Copter: DFMessageWriter; ability to trickle messages out to DF
2015-09-03 15:20:19 +10:00
Andrew Tridgell
00da3ccc49
Copter: set in_arm_motors to false on all arm failure returns
...
otherwise if the user fails to arm due to interlock or emergency stop
then they won't be able to try to arm again until they reboot
2015-09-02 11:03:36 +10:00
Andrew Tridgell
64a8e66dd7
Copter: automatically set H_RSC_MIN/MAX from RC8_MIN/MAX on upgrade
...
this prevents a problem where the disarm throttle will change after
upgrading to 3.4
2015-09-02 10:25:48 +10:00
Gustavo Jose de Sousa
19d1c28c06
ArduCopter: use function name for AP_Scheduler task name
...
That makes it easier to identify tasks when debug is enabled in AP_Scheduler.
2015-09-01 20:22:18 +10:00
Gustavo Jose de Sousa
79b8b15053
ArduCopter: use designated initializers for tasks structs
...
Makes code less prone to break build and semantics (e.g., when a new field is
added).
2015-09-01 20:22:18 +10:00
Randy Mackay
7db77482f5
Copter: precision landing velocity PI object
...
Follow up changes required to actually use this PI during landing
2015-08-31 18:00:32 +09:00
Randy Mackay
f4b152f0e3
Copter: add Precision Landing to GPS land
2015-08-31 18:00:31 +09:00
Randy Mackay
0da38ba2bf
Copter: add Precision Landing log message
2015-08-31 18:00:30 +09:00
Randy Mackay
26ded641db
Copter: integrate Precision Landing lib
2015-08-31 18:00:28 +09:00
Randy Mackay
5a4729a966
Make: include AC_PrecLand and AP_IRLock libs in Copter
2015-08-31 18:00:27 +09:00
Randy Mackay
e92296a0b7
TradHeli: integrate RotorControlMode enum
2015-08-31 11:44:00 +09:00
Randy Mackay
d99bb66f8a
TradHeli: remove duplicate code in update_rotor_speed_target
2015-08-31 11:43:56 +09:00
Robert Lefebvre
c51b57e71c
Copter: Remove Armed check from heli RSC controls
2015-08-31 11:43:53 +09:00
Robert Lefebvre
b331799dac
Copter: Add handle to control Throttle Curve RSC.
2015-08-31 11:43:46 +09:00
Robert Lefebvre
c968ec3a63
Copter: Helicopters to use motor interlock logic.
...
Also, remove motor interlock pre-arm check to streamline logic.
2015-08-31 11:43:37 +09:00
Robert Lefebvre
161ce5c11d
Copter: Change name of rotor speed function to match that in library
2015-08-31 11:27:53 +09:00
Robert Lefebvre
990761a13b
Copter: Create new heli RSC RC Channel object.
2015-08-31 11:27:50 +09:00
Fredrik Hedberg
66d9d38750
Copter: Use AP_MotorsHeli_Single for HELI_FRAME.
2015-08-31 11:27:32 +09:00
Andrew Tridgell
ff934d5bca
Copter: added FS_CRASH_CHECK parameter
...
this allows automatic crash detection to be disabled
2015-08-31 12:15:46 +10:00
Andrew Tridgell
90909f2b4a
Copter: added DISARM_DELAY parameter
...
this allows automatic disarming to be disabled, or set to a shorter or
longer time as appropriate for the user
2015-08-31 11:44:08 +10:00
Stewart Loving-Gibbard
7cb494d8e2
Copter: Moving to RSSI library for reading various kinds of RSSI, with the possibility of adding more.
...
* Retains ability to read from Analog Pin
* Adds ability to read RSSI from PWM channel value as is done in OpenLRSng, EazyUHF, and various other LRS.
* Handles any type of RSSI that provides RSSI values inverted - i.e. when the low value is the best signal and the high value is the worst signal.
* Has different key names from all existing RSSI parameters to provide for a clean break and easier distinguishing.
* Existing parameters are marked as obsolete
2015-08-29 08:05:59 +10:00
Randy Mackay
cbfbd46547
Copter: Release notes for AC3.3-rc10
2015-08-28 12:21:09 +09:00
Randy Mackay
1608cffe95
Copter: increase failsafe close-to-home to 5m
...
This distance is used when a failsafe is initiated to decide whether to RTL or LAND
2015-08-28 09:24:37 +09:00
Randy Mackay
be603da579
Copter: fix optflow position_ok check
...
We should accept predicted relative horizontal position only when disarmed
2015-08-27 20:57:41 +09:00
Randy Mackay
4cdb5bf2bd
Copter: sanity check do-set-home and do-set-ROI location
2015-08-27 15:16:04 +09:00
Randy Mackay
0424b3f93c
Copter: pre-arm check of EKF compass variance
2015-08-26 13:59:41 +09:00
Randy Mackay
920d5cefbb
Copter: always check GPS before arming in Loiter
2015-08-26 13:15:28 +09:00
Randy Mackay
71cc89d107
Copter: add ACCEL_Z_FILT_HZ parameter description
...
Also fixed parameter links to ATC, BATT and MOT libraries
2015-08-26 11:17:50 +09:00
squilter
767b4da5b6
Copter: update send text severities
2015-08-25 14:05:25 +09:00
Grant Morphett
da37769e33
Copter: Added include guards for Copter.h
2015-08-25 13:54:18 +09:00
Randy Mackay
43fa9c8ae3
Copter: fix Autotune param descriptions
2015-08-23 14:56:41 +09:00
Randy Mackay
a10a74d498
Copter: AUTOTUNE_MIN_D param to allow controlling minimum D
2015-08-23 14:56:39 +09:00
Randy Mackay
6a4f4c5f8d
Copter: failsafe RTL vs LAND decision always based on 2m
...
Previously this decision was based on the WPNAV_RADIUS parameter which is unexpected (and undocumented) behaviour. Better just to hard-code it to 2m and remove the dependency on this parameter.
2015-08-23 11:03:35 +09:00
squilter
a11227af84
Copter: define and send FIRMWARE_VERSION
2015-08-21 22:40:52 +09:00
Randy Mackay
f0b992f01e
Copter: AC3.3-rc9 release notes
2015-08-20 10:04:55 +09:00
Tom Pittenger
87d0b12c7c
Copter: implement try send mission_item_reached
...
clean up unreachable code
2015-08-19 15:42:07 +10:00
Stewart Loving-Gibbard
d1f5a2988d
Copter: fix spelling errors in Parameters.cpp
2015-08-18 09:48:52 +09:00
squilter
f77b06175e
Copter: update flighttermination capability
2015-08-17 17:15:50 +09:00
Paul Riseborough
dc785fd2ed
Copter: shorten disarm counter to 10 seconds
2015-08-15 08:21:13 +09:00
Jonathan Challinger
94fb94d67d
Copter: adapt auto disarm for sprung throttle stick copters
2015-08-15 08:21:08 +09:00
Randy Mackay
c8ecb1bac7
Copter: fix PILOT_TKOFF_DZ param description
2015-08-13 10:40:26 -07:00
Randy Mackay
c324d4e89b
Copter: fix ANGLE_MAX param description
...
Thanks to Hamish for finding this
2015-08-13 10:35:32 -07:00
squilter
a42674b0b0
Copter: implement do_flighttermination
2015-08-12 14:17:44 -07:00
TShapinsky
5dfd1ff8d6
Copter: add velocity control timeout in guided mode
2015-08-13 02:07:00 +09:00
Andrew Tridgell
80ad9aa605
Copter: added RPM dataflash logging
2015-08-12 15:03:50 +10:00
Andrew Tridgell
1fdf7ec83f
Copter: added RPM sensor support
...
send result via MAVLink
2015-08-12 15:03:50 +10:00
Randy Mackay
7199b57fde
Copter: check frame for SET_POSITION_TARGET_GLOBAL_INT in guided
2015-08-11 16:41:17 -07:00
Randy Mackay
580c0ad9de
Copter: guided SET_POSITION_TARGET accepts frame
2015-08-11 16:41:11 -07:00
Randy Mackay
b781f85948
Copter: convert fn from body-frame to NE
2015-08-11 16:41:08 -07:00
Randy Mackay
59d5a4fad8
Copter: landing with guided velocity controller
2015-08-11 16:41:05 -07:00
squilter
85c39348f3
Copter: update copter's capabilities
2015-08-11 17:17:44 +10:00
Gustavo Jose de Sousa
4d4b856735
ArduCopter: standardize inclusion of libaries headers
...
This commit changes the way libraries headers are included in source files:
- If the header is in the same directory the source belongs to, so the
notation '#include ""' is used with the path relative to the directory
containing the source.
- If the header is outside the directory containing the source, then we use
the notation '#include <>' with the path relative to libraries folder.
Some of the advantages of such approach:
- Only one search path for libraries headers.
- OSs like Windows may have a better lookup time.
2015-08-11 16:28:40 +10:00
Jonathan Challinger
a18f71b29e
Copter: bug fix to RTL_ALT_MIN feature
...
commited by Randy
2015-08-08 15:38:47 +09:00
Przemek Lekston
f99b152b1f
Copter: fix logging disabled build
2015-08-01 21:19:17 +09:00
Randy Mackay
6765aedb5b
Copter: init vehicle capabilities
2015-07-31 14:50:29 +09:00
squilter
edf5ff1bbe
Copter: add capability bitmask
2015-07-31 14:50:15 +09:00
Randy Mackay
cc27fb46bf
Copter: arming check that baro is healthy
2015-07-29 16:32:47 +09:00
Randy Mackay
11c9e46ec7
Copter: arming check that accels and gyro are healty
2015-07-29 16:32:45 +09:00
Randy Mackay
4eb6f0f646
Copter: slow start motors after landing in Stabilize, Acro
2015-07-28 15:16:24 +09:00
Andrew Tridgell
149b6bffba
Copter: fixed comment on get_pilot_desired_yaw_rate
2015-07-27 12:04:03 +10:00
Randy Mackay
73ae816a8b
Copter: update AC3.3-rc8 release notes
2015-07-25 14:53:38 +09:00
Randy Mackay
0645453997
Copter: AC3.3-rc8 release notes
2015-07-25 13:46:14 +09:00
Randy Mackay
c627f84fa8
Copter: Ch6 circle rate as float
2015-07-23 16:21:23 +09:00
Randy Mackay
7935bf70f1
Copter: rc_override active only on non-zero overrides
...
Bug found by Kevin Hester
2015-07-22 17:32:30 +09:00