Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
65,480 Commits 71 Branches 509 Tags 747 MiB
Commit Graph

3313 Commits

Author SHA1 Message Date
Andy Piper 278595cf83 AP_HAL_ChibiOS: add support for sdcard to iFlight 2RAW 2024-07-26 10:39:38 +10:00
Andrew Tridgell 23f628f26b hwdef: fixes for BotBloxSwitch 2024-07-25 10:57:04 +10:00
bugobliterator 8a4b925c71 AP_HAL_ChibiOS: add support for PPP between CubeRed Primary and Secondary 2024-07-25 09:37:16 +10:00
bugobliterator 993d694fbb AP_HAL_ChibiOS: allow setup for low noise clock mismatch tolerant UART line 2024-07-25 09:37:16 +10:00
bugobliterator 025077b6f4 AP_HAL_ChibiOS: add support for recording UART Rx errors 2024-07-25 09:37:16 +10:00
Peter Barker a4577685a7 AP_HAL_ChibiOS: rename LED_1 pin define to AP_NOTIFY_GPIO_LED_1_PIN 2024-07-24 09:13:50 +10:00
Bob Long 230269bed8 HAL_ChibiOS: add adjustable wdg timeout for hwdefs 
This allows the watchdog timeout to be adjusted in the hwdef.dat file,
so that critical nodes like ESCs can recover more quickly.
 2024-07-23 19:53:38 +10:00
Andrew Tridgell 03bdbea77c hwdef: enable relay support in MatekL431-DShot fw 
the PWM expansion boards can also be used for relay control, often
combined with PWM output
 2024-07-23 18:42:56 +10:00
James O'Shannessy ce0ae33c5b AP_HAL_ChibiOS: Capture the case where the persistent parameter is the newer format INSn_ACC_ID 
This fixes the handling of the newer INSn_* parameters when loading those stored in persistent memory.
 2024-07-23 12:06:18 +10:00
Peter Barker 7e722eeb94 hwdef: prune out redundant lines 
these have been merged with bad lines in them
 2024-07-17 17:49:57 +10:00
Peter Barker d4adb1923a hwdef: stop hwdefs defining HAL_GPIO_LED_ON to 0 2024-07-17 17:42:01 +10:00
bugobliterator d466618b11 AP_HAL_ChibiOS: add flash ecc corrupt method 2024-07-17 17:31:15 +10:00
bugobliterator ceea189fa3 AP_HAL_ChibiOS: enable heap allocation if flash space for bootloader is > 128K 2024-07-17 17:31:15 +10:00
Peter Barker 956ac243e1 AP_HAL_ChibiOS: adjust hwdef files for define renames 2024-07-11 09:34:00 +10:00
Andrew Tridgell 64f6abd4d4 AP_HAL_ChibiOS: switched ENABLE_HEAP to an #if 2024-07-11 09:28:17 +10:00
Andrew Tridgell e86e012896 AP_HAL_ChibiOS: removed run_debug_shell 2024-07-11 07:42:54 +10:00
Peter Barker 7f0f851243 hwdef: remove bogus EK2_RPRIMARY from Cube defaults files 
looks likely, but hasn't ever existed
 2024-07-10 22:35:51 +10:00
Peter Barker 481e0301dd hwdef: H757_EVAL: make it not-AP_Periph 
avoids this compilation error:

../../Tools/AP_Periph/can.cpp:152:33: error: static assertion failed: DroneCAN bootloader cannot support external flash
  152 | static_assert(EXT_FLASH_SIZE_MB == 0, "DroneCAN bootloader cannot support external flash");
compilation terminated due to -Wfatal-errors.
 2024-07-09 12:00:52 +10:00
Peter Barker df0b4cdf6d AP_HAL_ChibiOS: chibios_hwdef.py: correct flake8 issues 2024-07-09 10:13:00 +10:00
Andy Piper 1b5febe046 AP_HAL_ChibiOS: iFlight 2RAWH743 2024-07-09 09:43:38 +10:00
HiRCBro 8c58334173 AP_HAL_ChibiOS: longBowF405WING 2024-07-09 09:05:27 +10:00
cuav-chen2 f906fffff7 hwdef: fixed pin definition for C-RTK2-HP 2024-07-08 22:10:27 +10:00
bugobliterator b93c9256c7 AP_HAL_ChibiOS:hwdef/common: disable second core on dual core MCUs 2024-07-05 14:16:27 +10:00
bugobliterator c8fe71b6b0 AP_HAL_ChibiOS: use debug option 3 which includes defines as well 2024-07-05 14:16:27 +10:00
Vincent Poon fba47e641d Update Pixhawk6C hwdef.dat 
Fix https://github.com/ArduPilot/ardupilot/issues/25840

The overcurrent detection of the HIPOWER current limiting chip is connected to PC11 on the Pixhawk 6C.
 2024-07-04 06:37:58 +10:00
Peter Barker 4550f7dcb1 hwdef: make H757I_EVAL a periph 
its bootloader is marked as a bootloader peripheral, the main firmware is notistent in our message.
 2024-07-02 09:17:26 +10:00
Peter Barker a715ee1ce2 AP_HAL_ChibiOS: make AP_RANGEFINDER_ENABLED remove more code 2024-07-02 09:17:26 +10:00
Andrew Tridgell bcfc273799 hwdef: enable an ADC on CubePilot-PPPGW 
allows for mcu temp
 2024-06-27 10:11:14 +10:00
Andrew Tridgell 98479658d4 HAL_ChibiOS: support H7 at 200MHz 2024-06-27 10:11:14 +10:00
Andrew Tridgell 34815f9fb0 HAL_ChibiOS: scale RTS threshold to make software CTS more effective 2024-06-27 10:11:14 +10:00
Andrew Tridgell ebc4ee99a9 AP_HAL_ChibiOS: add support for GPIO pins as software CTS 2024-06-27 10:11:14 +10:00
bugobliterator b6cdb8b1a6 hwdef: fix hwdef for updated CubePilot-PPPGW 2024-06-27 10:11:14 +10:00
bugobliterator 0a0d5a3e49 AP_HAL_ChibiOS: add support for PPP on CubeOrangePlus 2024-06-27 10:11:14 +10:00
Andrew Tridgell ed58758ce6 hwdef: don't use DEFAULTGPIO in bootloaders 
setting up a DEFAULTGPIO pulldown in bootloaders is a bad idea as it
overrides any hardware pullups that have been put in place as part of
a "hold in bootloader" mechanism. See discussion in #27360 for ELRS

note that this only impacts one board that I can see, the
BlitzF745AIO, due to the MCU vs DEFAULTGPIO interaction
 2024-06-25 12:05:40 +10:00
Peter Barker 7dd50cd036 hwdef: JHEMCU-H743HD correct for rename of W25 dataflash driver 2024-06-25 11:05:22 +10:00
Peter Barker 6b490a4c47 AP_HAL_ChibiOS: rename Notify buzzertype enumeration 2024-06-20 14:47:20 +10:00
Siddharth Bharat Purohit f89923fcbe AP_HAL_ChibiOS: mark CONS RX/TX as NC for ADSB Carrier board 2024-06-19 19:09:36 +10:00
bugobliterator 04879d2c42 AP_HAL_ChibiOS: add passthrough from secondary through primary while in bootloader 2024-06-19 19:09:10 +10:00
Thomas Watson 4ef2d49d92 hwdef: CubeRedPrimary: ICM45686 as ICM20649 alternative 
Empirically what is present on Cube Reds built on/after 2024-04-14.
 2024-06-18 10:53:08 +09:00
Iampete1 b68af03419 AP_HAL_ChibiOS: update relay parameter names 2024-06-18 08:59:34 +09:00
SCRainbow 0f011a4b61 AP_HAL_ChibiOS: Added support for JHEMCU H743 HD 
commit 7d01b9e3cb09e89afea4bcb903d54b9ce8cdb1be
Author: SCRainbow <139575368+SCRainbow@users.noreply.github.com>
Date:   Fri Apr 19 07:06:45 2024 +0800

    AP_HAL_ChibiOS: Added support for JHEMCU H743 HD

    commit d1e4ba0ef307e3ab3cc0f4218dd08e2f5c8f6ad0
    Author: SCRainbow <139575368+SCRainbow@users.noreply.github.com>
    Date:   Fri Apr 19 04:38:22 2024 +0800

        board_types.txt: Reverted change for seperate PR

        hwdef-bl.dat: revert flash size to 2mb

        hwdef.dat: flash size set to 2mb, corrected syntax, realigned imus

    commit ee465524a7c37509d89ae17ae277a42328cb1cfd
    Merge: b1a55e0e3d 0f0023e62d
    Author: SCRainbow <139575368+SCRainbow@users.noreply.github.com>
    Date:   Tue Apr 16 10:59:31 2024 +0800

        Merge branch 'master' into master

    commit b1a55e0e3d10a1fc3eff7af14c837271d0a3d131
    Author: SCRainbow <139575368+SCRainbow@users.noreply.github.com>
    Date:   Tue Apr 16 10:59:08 2024 +0800

        Create defaults.parm

        output 9 is setup as serial LED

    commit 8437b6277c9f1d00a333ebd4f96946f02bf2bfc1
    Author: SCRainbow <139575368+SCRainbow@users.noreply.github.com>
    Date:   Tue Apr 16 10:56:44 2024 +0800

        Update JHEMCU-H743HD/README.md

        Changed default UART6 protocol to displayport

        Co-authored-by: Henry Wurzburg <hwurzburg@yahoo.com>

    commit 186740cbc038a0ed4dd3bfc9035504bdd165b5aa
    Author: SCRainbow <139575368+SCRainbow@users.noreply.github.com>
    Date:   Tue Apr 16 10:56:28 2024 +0800

        Update JHEMCU-H743HD/hwdef.dat

        Changed default UART6 protocol to displayport

        Co-authored-by: Henry Wurzburg <hwurzburg@yahoo.com>

    commit 48cfc0daaf58fecfe75a9338c91f4543aed4b14c
    Merge: 789b71d709 5a21d0cb8a
    Author: SCRainbow <139575368+SCRainbow@users.noreply.github.com>
    Date:   Mon Apr 15 10:25:49 2024 +0800

        Merge branch 'master' into master

    commit 789b71d709b2b01c2a5134f8293f785917a787fd
    Author: SCRainbow <139575368+SCRainbow@users.noreply.github.com>
    Date:   Sat Apr 13 19:37:37 2024 +0800

        Update hwdef-bl.dat

        Corrected FLASH_SIZE_KB to 1024 as H743VGT6  have only 1M flash

    commit cfa26b8f014c1775aa0270168682deca8ae16e78
    Author: SCRainbow <139575368+SCRainbow@users.noreply.github.com>
    Date:   Sat Apr 13 19:37:04 2024 +0800

        Update hwdef.dat

        Corrected FLASH_SIZE_KB to 1024 as H743VGT6  have only 1M flash

    commit 3ae8a2c6ca2b0e95c076b652622adfe53275575a
    Author: SCRainbow <139575368+SCRainbow@users.noreply.github.com>
    Date:   Sat Apr 13 18:40:31 2024 +0800

        Update hwdef.dat

        Fixed BIDIR labels, they are now in pairs, only on M1, M3, M5 and M7

    commit 200e22d5f06f6a0aef30463f4d2702872fe6f063
    Author: SCRainbow <139575368+SCRainbow@users.noreply.github.com>
    Date:   Sat Apr 13 18:20:42 2024 +0800

        Update hwdef.dat

        Included OTG2, default serial 3 protocol is set to None.

    commit 8f561c17efa9708acbd257759f12b056f44ea5f6
    Author: SCRainbow <139575368+SCRainbow@users.noreply.github.com>
    Date:   Sat Apr 13 18:10:01 2024 +0800

        Update README.md

        Corrected title

    commit 404b49f399d756561727571132ec38f3f89188a3
    Merge: b1d353b185 77cccd08a3
    Author: SCRainbow <139575368+SCRainbow@users.noreply.github.com>
    Date:   Sat Apr 13 09:56:53 2024 +0800

        Merge branch 'master' into master

    commit b1d353b185721c1e319f2b758f8e4ea1b1d30968
    Author: SCRainbow <139575368+SCRainbow@users.noreply.github.com>
    Date:   Fri Apr 12 17:51:57 2024 +0800

        Added JHEMCU H743 HD support

    commit 299841b23628431dc1b0172bb5fc50968acf2fd1
    Author: SCRainbow <139575368+SCRainbow@users.noreply.github.com>
    Date:   Fri Apr 12 17:25:01 2024 +0800

        Added JHEMCU-H743HD

    commit 39d10456894bbbc4f73dfba65ee7cace7659ae17
    Author: SCRainbow <139575368+SCRainbow@users.noreply.github.com>
    Date:   Fri Apr 12 17:21:14 2024 +0800

        Update README.md

    commit 048780fe44aace829173b0e701bc5a2ff874ee49
    Author: SCRainbow <139575368+SCRainbow@users.noreply.github.com>
    Date:   Fri Apr 12 17:18:23 2024 +0800

        Added initial hwdef for JHEMCU H743 HD board

commit d4021681ec6d47f81973e6b346a67b757f3908d2
Author: SCRainbow <139575368+SCRainbow@users.noreply.github.com>
Date:   Fri Apr 19 07:06:46 2024 +0800

    Tools: Added support for JHEMCU H743 HD

    commit d1e4ba0ef307e3ab3cc0f4218dd08e2f5c8f6ad0
    Author: SCRainbow <139575368+SCRainbow@users.noreply.github.com>
    Date:   Fri Apr 19 04:38:22 2024 +0800

        board_types.txt: Reverted change for seperate PR

        hwdef-bl.dat: revert flash size to 2mb

        hwdef.dat: flash size set to 2mb, corrected syntax, realigned imus

    commit ee465524a7c37509d89ae17ae277a42328cb1cfd
    Merge: b1a55e0e3d 0f0023e62d
    Author: SCRainbow <139575368+SCRainbow@users.noreply.github.com>
    Date:   Tue Apr 16 10:59:31 2024 +0800

        Merge branch 'master' into master

    commit b1a55e0e3d10a1fc3eff7af14c837271d0a3d131
    Author: SCRainbow <139575368+SCRainbow@users.noreply.github.com>
    Date:   Tue Apr 16 10:59:08 2024 +0800

        Create defaults.parm

        output 9 is setup as serial LED

    commit 8437b6277c9f1d00a333ebd4f96946f02bf2bfc1
    Author: SCRainbow <139575368+SCRainbow@users.noreply.github.com>
    Date:   Tue Apr 16 10:56:44 2024 +0800

        Update JHEMCU-H743HD/README.md

        Changed default UART6 protocol to displayport

        Co-authored-by: Henry Wurzburg <hwurzburg@yahoo.com>

    commit 186740cbc038a0ed4dd3bfc9035504bdd165b5aa
    Author: SCRainbow <139575368+SCRainbow@users.noreply.github.com>
    Date:   Tue Apr 16 10:56:28 2024 +0800

        Update JHEMCU-H743HD/hwdef.dat

        Changed default UART6 protocol to displayport

        Co-authored-by: Henry Wurzburg <hwurzburg@yahoo.com>

    commit 48cfc0daaf58fecfe75a9338c91f4543aed4b14c
    Merge: 789b71d709 5a21d0cb8a
    Author: SCRainbow <139575368+SCRainbow@users.noreply.github.com>
    Date:   Mon Apr 15 10:25:49 2024 +0800

        Merge branch 'master' into master

    commit 789b71d709b2b01c2a5134f8293f785917a787fd
    Author: SCRainbow <139575368+SCRainbow@users.noreply.github.com>
    Date:   Sat Apr 13 19:37:37 2024 +0800

        Update hwdef-bl.dat

        Corrected FLASH_SIZE_KB to 1024 as H743VGT6  have only 1M flash

    commit cfa26b8f014c1775aa0270168682deca8ae16e78
    Author: SCRainbow <139575368+SCRainbow@users.noreply.github.com>
    Date:   Sat Apr 13 19:37:04 2024 +0800

        Update hwdef.dat

        Corrected FLASH_SIZE_KB to 1024 as H743VGT6  have only 1M flash

    commit 3ae8a2c6ca2b0e95c076b652622adfe53275575a
    Author: SCRainbow <139575368+SCRainbow@users.noreply.github.com>
    Date:   Sat Apr 13 18:40:31 2024 +0800

        Update hwdef.dat

        Fixed BIDIR labels, they are now in pairs, only on M1, M3, M5 and M7

    commit 200e22d5f06f6a0aef30463f4d2702872fe6f063
    Author: SCRainbow <139575368+SCRainbow@users.noreply.github.com>
    Date:   Sat Apr 13 18:20:42 2024 +0800

        Update hwdef.dat

        Included OTG2, default serial 3 protocol is set to None.

    commit 8f561c17efa9708acbd257759f12b056f44ea5f6
    Author: SCRainbow <139575368+SCRainbow@users.noreply.github.com>
    Date:   Sat Apr 13 18:10:01 2024 +0800

        Update README.md

        Corrected title

    commit 404b49f399d756561727571132ec38f3f89188a3
    Merge: b1d353b185 77cccd08a3
    Author: SCRainbow <139575368+SCRainbow@users.noreply.github.com>
    Date:   Sat Apr 13 09:56:53 2024 +0800

        Merge branch 'master' into master

    commit b1d353b185721c1e319f2b758f8e4ea1b1d30968
    Author: SCRainbow <139575368+SCRainbow@users.noreply.github.com>
    Date:   Fri Apr 12 17:51:57 2024 +0800

        Added JHEMCU H743 HD support

    commit 299841b23628431dc1b0172bb5fc50968acf2fd1
    Author: SCRainbow <139575368+SCRainbow@users.noreply.github.com>
    Date:   Fri Apr 12 17:25:01 2024 +0800

        Added JHEMCU-H743HD

    commit 39d10456894bbbc4f73dfba65ee7cace7659ae17
    Author: SCRainbow <139575368+SCRainbow@users.noreply.github.com>
    Date:   Fri Apr 12 17:21:14 2024 +0800

        Update README.md

    commit 048780fe44aace829173b0e701bc5a2ff874ee49
    Author: SCRainbow <139575368+SCRainbow@users.noreply.github.com>
    Date:   Fri Apr 12 17:18:23 2024 +0800

        Added initial hwdef for JHEMCU H743 HD board
 2024-06-18 08:21:16 +09:00
Brad Bosch f2f9349419 AP_HAL: Add support for parity to Serial passthrough 
Add code to reflect USB ACM parity setting to the passthrough port alongside existing support for ACM baud rate changes.  Some use cases for serial passthrough require specific parity settings.

For example, even parity is used and required by the USART protocol used in the STM32 system bootloader. This enhancement allows the use of standard flash programming tools such as STM32CubeProgrammer to flash connected STM based peripherals such as Receivers and Telemetry radios via serial passthrough.  Some examples of such peripherals include the FrSky R9 receivers as well as various other STM based LoRa modules used by the mLRS project.
 2024-06-11 09:24:32 +10:00
Martin Luessi 3201622d38 AP_HAL_ChibiOS: Update readme for RADIX2HD 2024-06-11 09:11:09 +10:00
subashchandar 7e59b8c5a0 hwdef: update PixFlamingo_f767 README 2024-06-11 08:42:56 +10:00
Andy Piper 90f7222f98 AP_HAL_ChibiOS: enable LEDs on Here4AP 2024-06-10 06:53:23 +10:00
Henry Wurzburg 887e4713e6 AP_HAL_ChibiOS:remove fetaures to allow boards to build 2024-06-04 09:23:43 +10:00
Andrew Tridgell 8dbad82c8a AP_HAL_ChibiOS: use NEW_NOTHROW for new(std::nothrow) 2024-06-04 09:20:21 +10:00
Andy Piper ae8a2d9513 AP_HAL_ChibiOS: reset pwm peripheral on F1 when deallocating IC DMA 2024-06-02 10:54:14 +10:00
Henry Wurzburg f5a6193cbf AP_HAL_ChibiOS:correct pin to be pulled high during boot 2024-06-01 10:23:52 +10:00
Henry Wurzburg f5f78b7711 AP_HAL_ChibiOS:Improve SDMODELH7V2 definition 2024-05-29 10:40:03 +10:00
Peter Barker 720c8719dc waf: boards.py: use chibios_hwdef.py to get boards list 2024-05-28 10:25:39 +10:00
rotorman 0962b759b0 AP_HAL_ChibiOS: adds Flywoo/Goku F405 HD 1-2S ELRS AIO v2 flight controller support 
Co-authored-by: Henry Wurzburg <hwurzburg@yahoo.com>
 2024-05-28 09:57:14 +10:00
Iampete1 e10b4abad8 ChibiOS: UART: Add support for RS-485 Driver Enable RTS flow control 2024-05-28 09:48:19 +10:00
Iampete1 e6a0abdfce AP_HAL_ChibiOS: hwdef.py: find alt function for UART RTS and add to init struct 2024-05-28 09:48:19 +10:00
burgeruser 458cb0a1c9 AP_HAL_ChibiOS: bi-directional dshot on iomcu F103 8MHz 2024-05-28 06:56:14 +10:00
David O'Connor 77adb5586d AP_HAL_ChibiOS: Added mag and dataflash logging support to AnyLeaf H7 2024-05-23 09:48:02 +10:00
Peter Barker 482342340d hwdef: fold minimal_GPS.inc into sole user 2024-05-22 18:03:06 +10:00
Maxim Buzdalov 43937ddeed AP_HAL_ChibiOS: add support for Extended DShot Telemetry v2 2024-05-15 17:29:19 +10:00
Andy Piper 2891b37807 AP_HAL_ChibiOS: add SDMODELV2 2024-05-15 07:27:46 +10:00
Iampete1 0bb51a31ea AP_HAL_ChibiOS: remove setting of ROMFS flags 2024-05-14 10:05:51 +10:00
Andy Piper a7d4183776 AP_HAL_ChibiOS: BLITZ Wing H743 2024-05-14 09:35:51 +10:00
mateksys 8c23379d45 AP_HAL_ChibiOS: add MatekG474-Periph hwdef 2024-05-10 12:54:11 +10:00
Andrew Tridgell 3050a8b0dc HAL_ChibiOS: fixed erasing of G4 dual-bank past 256k flash 
BKER needs to be set to bank number, lower 7 bits of page number in
PNB
 2024-05-10 12:54:11 +10:00
Andy Piper 8c91077c35 AP_HAL_ChibiOS: correct GPS output on MambaH743v4 2024-05-08 18:56:45 +10:00
Andrew Tridgell b4bc6f1e2e hwdef: added MatekL431-APDTelem 
for using APD ESCs with serial telemetry
 2024-05-08 18:19:19 +10:00
MallikarjunSE d93f9a09db hwdef:update DMA 2024-05-08 09:04:45 +10:00
Henry Wurzburg 061823551a hwdef:preconfig MicoAir bds shipping with BF for BF migration 2024-05-07 14:14:06 +10:00
Henry Wurzburg 7a21f2b862 hwdef: enable can port on Blitz743Pro 2024-05-07 10:44:15 +10:00
tanghongkai b66ecd8884 AP_Logger: rename class and hwdef related to w25nxx 2024-05-06 12:26:38 +10:00
mateksys af1ab61f78 AP_HAL_ChibiOS: update MatekH7A3 hwdef for 16MHz xtal 2024-05-04 20:52:50 +10:00
Jacob Dahl e5ea8f14f4 hwdef: ARKV6X: enable debug console 2024-05-02 15:16:33 -07:00
Jacob Dahl 9f5e837646 hwdef: ARKV6X: UART6 RC SBUS input 2024-05-02 15:16:33 -07:00
Andy Piper b1e7974453 AP_HAL_ChibiOS: add highres sampling to Pixhawk6X 2024-05-02 11:01:20 +10:00
Peter Barker f44dd9605d AP_HAL_ChibiOS: enable AP_Scheduler for CubeOrange-periph-heavy 
... we use the scehduler in AP_Motors, which is compiled when making heavy-periph
 2024-05-01 17:53:44 +10:00
Peter Barker c521a5edfe AP_HAL_ChibiOS: move handling of AP_Radio RC input down into AP_RCProtocol 2024-05-01 17:51:49 +10:00
richaravoil af3be52925 AP_HAL_ChibiOS: adding active UART in the bootloader 
Adding USART6 to be active in bootloader phase to allow flashing with a serial connection.
 2024-05-01 17:21:30 +10:00
Andy Piper f38faaae99 AP_HAL_ChibiOS: iFlight Blitz H7 Pro 2024-05-01 17:19:05 +10:00
Hubert 890a83166d hwdef: Fix MicoAir743 internal compass rotation 2024-04-29 07:43:57 +10:00
Hubert 84900473de AP_HAL_ChibiOS: added NxtPX4v2 
Update README.md

Update NxtPX4v2_BackView

Hwdef Remove: define HAL_GPIO_LED_OFF 0
 2024-04-24 13:57:48 +10:00
Hubert d1d71db8a0 AP_HAL_ChibiOS: add hwdef MicoAir743 
Update README.md

Co-Authored-By: Henry Wurzburg <hwurzburg@yahoo.com>
 2024-04-23 09:56:23 +10:00
Henry Wurzburg 4d7e4d1ca9 Revert "hwdef: bdshot version of the MatekF765-SE" 
This reverts commit ac86bd8d21.
 2024-04-23 09:52:01 +10:00
Daniel Li f47998ed8a hwdef: Fix Aocoda-RC H743Dual motor 5-8 mis-labeled issue 2024-04-22 12:03:33 +10:00
Randy Mackay 6a56b2bc94 AP_HAL_ChibiOS: correct CUAV-Nora periph power comment 2024-04-17 18:07:56 +10:00
Randy Mackay 1b4f62c1ea AP_HAL_ChibiOS: correct CUAV-X7 periph power comment 2024-04-17 18:07:56 +10:00
Randy Mackay 69eff077d7 AP_HAL_ChibiOS: Durandal peripheral power on at startup 2024-04-17 18:07:56 +10:00
Randy Mackay 136ccf66c7 AP_HAL_ChibiOS: Pixhawk5X peripheral power on at startup 2024-04-17 18:07:56 +10:00
Randy Mackay 0b3b2148cb AP_HAL_ChibiOS: Pixhawk6C peripheral power on at startup 2024-04-17 18:07:56 +10:00
Randy Mackay 561d1254a1 AP_HAL_ChibiOS: Pixhawk6X peripheral power on at startup 2024-04-17 18:07:56 +10:00
Andy Piper ca3ad93f0d AP_HAL_ChibiOS: iFlight BLITZ Mini F745 2024-04-17 17:34:10 +10:00
Andy Piper bad4463463 AP_HAL_ChibiOS: iFlight Blitz F745 2024-04-17 17:34:10 +10:00
Gone4Dirt 9153c40568 AP_HAL_ChibiOS: MatekL431-Rangefinder: Add 2nd rangefinder 2024-04-17 17:06:42 +10:00
Leonardo Garcia 763193d4fc AP_HAL_ChibiOS: Support for 3DR Control Zero H7 OEM rev G 
Co-authored-by: Alexis Guijarro <totonzx@gmail.com>
Co-authored-by: Andy Piper <github@andypiper.com>
 2024-04-16 14:10:13 +10:00
Henry Wurzburg 5c4aeddae7 AP_HAL_ChibiOS: add MicoAir405Mini 2024-04-16 09:21:23 +10:00
FOG_Yamato ac86bd8d21 hwdef: bdshot version of the MatekF765-SE 2024-04-16 09:13:43 +10:00
Andy Piper 563d31b1ea AP_HAL_ChibiOS: fixups for FoxeerF405v2 2024-04-11 18:38:08 +10:00
Henry Wurzburg 6b5bb4e864 hwdef:add BIDIR to MatekH7A3 2024-04-11 10:17:43 +10:00
mateksys 74e7132bd3 hwdef: add MatekH7A3 readme.md 2024-04-11 10:17:17 +10:00
Hubert 4893f1303c hwdef: correct hwdef for MicoAir405v2 
Update hwdef: DMA allocation and LED mapping
Update README: UARTs DMA allocation
Update defaults.parm: GPS low baudrate
 2024-04-10 21:55:01 +10:00
Andrew Tridgell 739d4a7fc8 hwdef: the RM3100 should run at max 1MHz on SPI bus 2024-04-10 21:40:51 +10:00
Alexis Guijarro a50c19f622 mRo Control Zero Classic: Added ADC input for servo rail 2024-04-10 19:01:51 +10:00
Peter Barker 0e6bca92f7 AP_HAL_ChibiOS: remove redundant lines from hwdef files 2024-04-10 17:28:48 +10:00
Peter Barker 29149fad1b hwdef: remove un-needed lines from CSKY405 hwdef 
linting the hwdef showed this
 2024-04-10 10:35:16 +10:00
Peter Barker f16d0378e1 hwdef: compilation fix for CSKY405-fix 
SCB-WAF: ../../libraries/AP_HAL/AP_HAL_Boards.h:372:2: error: #error "HAL_GPIO_LED_OFF must not be defined, it is implicitly !HAL_GPIO_LED_ON"  372 | #error "HAL_GPIO_LED_OFF must not be defined, it is implicitly !HAL_GPIO_LED_ON"
 2024-04-10 10:35:16 +10:00
Andrew Tridgell 006d2c6cfe hwdef: require bootloader for BotBloxSwitch 2024-04-10 09:59:14 +10:00
Peter Barker 27598d1026 AP_HAL_ChibiOS: add missing Math.h include 
for "MIN"
 2024-04-10 08:45:18 +09:00
Iampete1 73f4a47496 AP_HAL_ChibiOS: and `uart_log` method and stats struct 2024-04-09 10:00:50 +10:00
Iampete1 7dd2529683 AP_HAL_ChibiOS: UARTDriver: add getters for cumulative tx and rx counts 2024-04-09 10:00:50 +10:00
Peter Barker ecf93f6d86 hwdef: remove redundant defines from hwdefs 
this is set in the periph defaults file
 2024-04-09 09:32:15 +10:00
Andy Piper 75978f9d6f AP_HAL_ChibiOS: CB Unmanned Stamp H743 2024-04-09 09:26:40 +10:00
richaravoil 4cdca46a0c hwdef: adding IMU lines for older version of board 2024-04-08 22:30:57 +10:00
Andy Piper b9fede8a27 AP_HAL_ChibiOS: fixup FoxeerF405v2 build 2024-04-06 10:13:46 +11:00
Michael du Breuil 84cef5b786 AP_HAL_ChibiOS: add sw-boom-f407 and supporting scripts 2024-04-05 10:53:38 +11:00
AlexandrShipovsky ace31e617e AP_HAL_ChibiOS: add CSKY405 board 2024-04-05 10:45:00 +11:00
Andy Piper fdce070f81 AP_HAL_ChibiOS: allow H7RF to build 2024-04-05 10:23:50 +11:00
Iampete1 edc12c2857 AP_HAL_ChibiOS: use new UART stats tracking helper moving history up to util 2024-04-03 13:10:06 +01:00
Andy Piper b045939f1d AP_HAL_ChibiOS: FoxeerF405v2 2024-04-03 18:50:52 +11:00
Peter Barker 47716e2338 hwdef: remove stray HAL_BUILD_AP_PERIPH defines 
this is added by defaults_periph
 2024-04-03 18:36:29 +11:00
Peter Barker 5fb4e1e285 hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED 2024-04-03 18:36:29 +11:00
Peter Barker 764f6863ea hwdef: re-enable RCIN thread on some builds/boards 
not because they need it, but to make a PR NFC
 2024-04-03 18:36:29 +11:00
Peter Barker 994c268644 AP_HAL_ChibiOS: replace HAL_NO_RCIN_THREAD w/HAL_RCIN_THREAD_ENABLED 2024-04-03 18:36:29 +11:00
Henry Wurzburg 594c2466d8 HWDEF:revert copter only build on bds with integrated escs 2024-04-03 18:31:54 +11:00
Peter Barker a65e06e0a9 AP_HAL_ChibiOS: move GPIO ON/off defaults from AP_HAL_ChibiOS to AP_HAL 
these can be reused across different vehicles
 2024-04-03 11:00:24 +11:00
Peter Barker e1f3864349 hwdef: convert_betaflight_unified.py: don't set HAL_GPIO_LED_OFF 
this value is the default value anyway, so don't make many copies..
 2024-04-03 11:00:24 +11:00
Peter Barker 10627d296d hwdef: remove HAL_GPIO lines which are simply the default values 
... or the _OFF entry, which is simply !HAL_GPIO_MED_ON
 2024-04-03 11:00:24 +11:00
Peter Barker 99dd85d51c AP_HAL_ChibiOS: enforce HAL_GPIO_LED_OFF is not(HAL_GPIO_LED_ON) 
the current "flexibility" allows for ON/OFF to be the same value.

Many hwdef files where only setting one of these, leaving the other at teh default, too....
 2024-04-03 11:00:24 +11:00
mateksys b904ab27f8 AP_HAL_ChibiOS: add MatekH7A3 defaults.parm 2024-04-02 15:29:55 +11:00
mateksys 4c3800c462 AP_HAL_ChibiOS: modify MatekH7A3 hwdef 2024-04-02 15:29:55 +11:00
Peter Barker 33e5b20709 hwdef: re-add ESC control to AP_Periph units which lost it 
I'm quite sure that several of these don't actually want it, but want NFC
 2024-04-02 11:28:27 +11:00
Peter Barker 416f7d393a hwdef: remove DISABLE_SERIAL_ESC_COMM AP_Periph boilerplate 
... use the defaults file instead
 2024-04-02 11:28:27 +11:00
Peter Barker f28cfc9a3b hwdef: remove handling of FULL_CHIBIOS_BOOTLOADER directive 
the string FULL_CHIBIOS_BOOTLOADER doesn't exist anywhere else in the source code
 2024-04-02 11:20:48 +11:00
Henry Wurzburg b83a895d7b HWDEF: allow all build targets for non-integrated boarda 2024-04-02 10:17:21 +11:00
Peter Barker 8fc76e7455 hwdef: remove extraneous lines from hwdef files 
these either come from includes are duplicated in these files
 2024-03-26 11:09:03 +11:00
Peter Barker 395f438b42 chibios_hwdef.py: print error message if a define is re-defined at top level with same value 2024-03-26 11:09:03 +11:00
Peter Barker eca2fd92b2 chibios_hwdef.py: correct extraction of intdefines 
another regex problem
 2024-03-26 11:09:03 +11:00
Peter Barker 1f3b4c47a0 hwdef: make a skyviper.inc, use it on skyviper-journey 2024-03-26 11:07:42 +11:00
Peter Barker df19fed523 AP_HAL_ChibiOS: remove VRBrain board sub-types 
these were only used to turn choose between AP_Notify LED backends, which can be done much more neatly with specific features defines.
 2024-03-26 11:06:13 +11:00
Peter Barker d663f14e3e AP_HAL_ChibiOS: remove HAL_BOARD_SUBTYPE_CHIBIOS_FMUV4 
this isn't used for anything
 2024-03-26 10:59:23 +11:00
Peter Barker 813f0cf428 hwdef: remove save_some_flash.inc 
all but one board was getting all of these includes from minimize_fpv_osd, and the remaining board had most lines foming from minimize_features.inc.

This file has served its purpose, its role now taken on by minimize_fpv_osd.inc
 2024-03-24 20:15:53 +11:00
Peter Barker 85d25b205f hwdef: remove unused STM32_PWM_USE_ADVANCED defines 2024-03-23 22:04:34 +11:00
Peter Barker 5d369b2634 chibios_hwdef.py: correct extraction of intdefines from hwdef files 
many of our hwdef files contain lines which look like this:

define STM32_PWM_USE_ADVANCED TRUE

The current regex does not allow for numbers in those define, so the regex ends up matching "STM" as a name....

the "intdefines" hash which is populated from these is only used internally to chibios_hwdey.py for logic purposes, not directly in hwdef output purposes, and none of the strings which it looks at contain numbers at the moment, so this is a non-functional change.
 2024-03-23 15:23:08 +11:00
Andrew Tridgell 663a41a1f0 hwdef: probe external i2c compasses on MatekL431-GPS 2024-03-23 08:29:24 +11:00
Tim Tuxworth f4d19275fc Chibios: CubeRed - change NET_ENABLED to NET_ENABLE 2024-03-20 19:08:31 +11:00
Andy Piper d2b50edf12 AP_HAL_ChibiOS: Orqa F405 Pro 2024-03-20 19:04:21 +11:00
Andrew Tridgell d3a37d1357 HAL_ChibioOS: fixed FDCAN -> CAN labels 
we use CAN1_RX not FDCAN1_RX in our MCU files
 2024-03-20 14:26:23 +11:00
Alex P 4b082eb579 hwdef: added JHEMCUGF16F405 2024-03-19 19:53:03 +11:00
Wu 3fbf3368fc AP_HAL_ChibiOS: added RadiolinkPIX6 support 2024-03-19 19:50:42 +11:00
Peter Barker 1d4e0a784c AP_HAL_ChibiOS: rename GPS_ to GPS1_ 2024-03-19 19:50:12 +11:00
Peter Barker 1ee7ef37ab AP_HAL_ChibiOS: adjust for GPS parameter renames 2024-03-19 19:50:12 +11:00
Peter Barker 7ea2928e52 AP_HAL_ChibiOS: allow IOMCU to be turned off in includes 2024-03-18 09:57:12 +11:00
Andrew Tridgell e983738c38 HAL_ChibiOS: fixed a cache corruption issue on H7 
This fixes a bug introduced in this PR:

https://github.com/ArduPilot/ardupilot/pull/25900

the bug is that when we don't go via the bouncebuffer on H7 we were
also skipping the cache invalidate/flush ops. This caused data
corruption for filesystem operations, particularly noticible as lua
scripts failing to load with parse errors or log corruption
 2024-03-16 21:57:33 +11:00