Commit Graph

14592 Commits

Author SHA1 Message Date
Peter Barker af6eb4e41d DataFlash: remove unused NeedPrep function 2017-06-14 12:20:29 +01:00
Peter Barker 9fb4ac2143 DataFlash: update examples for init simplification 2017-06-14 12:20:29 +01:00
Peter Barker 91b62abfe5 DataFlash: simplify dataflash initialisation 2017-06-14 12:20:29 +01:00
Randy Mackay 3bcc410048 AP_Beacon: fix pozyx west-east processing 2017-06-14 16:07:32 +09:00
Randy Mackay af7f4fef0a DataFlash: protect against large testRatio from EKF
This should be resolved in the EKF but for now this stops the floating point exception
2017-06-14 16:07:32 +09:00
Shingo Matsuura 7b0f6edf31 AC_Avoidance: add adjust velocity by beacon fence 2017-06-14 16:07:32 +09:00
Randy Mackay cded78022c AP_Beacon: update_boundary_points calculates outer perimeter around beacons 2017-06-14 16:07:32 +09:00
Shingo Matsuura c9475c2747 AP_Beacon: add get_boundary_points 2017-06-14 16:07:32 +09:00
Paulo Neves 3158cafefd AP_Beacon: Added Marvelmind beacon example.
This commit includes an example program to
run the code of AP_Marvelmind class.
It also includes a dump from the marvelmind
serial as well as a script that injects
this dump into the example for demonstration.
2017-06-14 09:33:23 +09:00
Randy Mackay 3e130273a9 AP_AHRS: do not fallback to DCM if EKF can provide relative position 2017-06-14 09:12:20 +09:00
Michael du Breuil 3534d0a0eb AP_Landing: Fix missing doc for LAND_TYPE 2017-06-13 20:06:41 +09:00
Randy Mackay c9cc0de83d AP_LandingGear: set pwm only when set_position called
Also simplify interface and internal state
2017-06-13 13:56:07 +09:00
Michael du Breuil 6c3db3939e AP_GPS: Update comment on get_rate_ms()
AP_GPS::get_rate_ms() is only meant to help the GPS backends
2017-06-12 01:06:38 +01:00
Peter Barker b5029aad4f DataFlash: correct dataflash examples 2017-06-11 20:34:12 +01:00
Peter Barker cdd0397bbf DataFlash: check all backends for sensor health 2017-06-11 20:34:12 +01:00
Peter Barker 7221b0def2 DataFlash: StartUnstartedLogging replaces logging_started/start_logging 2017-06-11 20:34:12 +01:00
Peter Barker bd747006aa DataFlash: eliminate calls to manipulate _writes_enabled 2017-06-11 20:34:12 +01:00
Peter Barker 0be2e7962f DataFlash: create a WritesOK method for WritePrioritisedBlock 2017-06-11 20:34:12 +01:00
Randy Mackay e84b5c63be LandingGear: remove unused enabled method
Also minor formatting fix
2017-06-10 10:34:33 +09:00
Randy Mackay 45147af455 AP_Beacon: fit SITL beacon location 2017-06-09 15:24:36 +09:00
Randy Mackay db45442de2 AP_Math: remove unused angle method 2017-06-09 15:21:58 +09:00
Andrew Tridgell bcd305c821 AP_Compass: fixes for merge with master 2017-06-09 14:56:33 +10:00
Andrew Tridgell 04430457d5 AP_Compass: attempts to diagnose the twitches in MMC3416 2017-06-09 14:56:33 +10:00
Andrew Tridgell 36932a2959 AP_Compass: implement full state machine for MMC3416
this uses 100Hz readings most of the time, but does slow offset
readings every 50 samples
2017-06-09 14:56:33 +10:00
Andrew Tridgell 167988b5c4 AP_Compass: implement MMC3416 temperature compensation
this is much slower, but removes temperature offset
2017-06-09 14:56:33 +10:00
Andrew Tridgell 736fb715ec AP_Compass: MMC3416 magnetometer driver 2017-06-09 14:56:33 +10:00
Francisco Ferreira a960c6526c
AP_Rangefinder: set type for VL53L0X 2017-06-08 01:32:11 +01:00
Pierre Kancir d5cc1e64ed GCS_Common: rename send_rangefinder to send_rangefinder_downward 2017-06-08 01:32:04 +01:00
Pierre Kancir e9685ba13e GCS_MAVLink: add rangefinder msg 2017-06-08 01:22:07 +01:00
Pierre Kancir 0848d96354 GCS_MAVLink: add send_distance_sensor_downward function 2017-06-08 01:22:07 +01:00
Pierre Kancir f0369bc507 GCS_MAVLink: add distance sensor msg 2017-06-08 01:22:07 +01:00
Pierre Kancir 38540b4dcc AP_Proximity: add PROXIMITY_MAX_DIRECTION and PROXIMITY_SENSOR_ID_START 2017-06-08 01:22:07 +01:00
Pierre Kancir 8b38bd2e33 AP_RangeFinder: add sensor type to backend 2017-06-08 01:22:07 +01:00
Andrew Tridgell b29db0aa5b AP_RangeFinder: implement VL53L0X rangefinder 2017-06-07 23:05:01 +01:00
Peter Barker 5c15c1e4d2 AP_BoardConfig: add public method returning true if on sensor error 2017-06-07 12:56:46 +01:00
Randy Mackay 1ce2a7fcee AP_Compass: resolve AK09916 driver compiler warning 2017-06-07 20:38:12 +09:00
Dr.-Ing. Amilcar Do Carmo Lucas ca72f4d283 AC_Stats: NFC Statistics are read-only variables 2017-06-07 19:53:09 +09:00
Pierre Kancir 1c8d169814 AP_HAL_SITL: sitl_airspeed simplify include 2017-06-07 20:29:02 +10:00
Pierre Kancir 775ca9303a AP_HAL_SITL: sitl_airspeed correct style 2017-06-07 20:29:02 +10:00
Pierre Kancir 0afc907b0a AP_HAL_SITL: rename sitl_ins & _update_ins to sitl_airspeed & _update_airspeed 2017-06-07 20:29:02 +10:00
Pierre Kancir b176ba53d7 SIM_Aircraft: move advance in time from update_position to time_advance 2017-06-07 20:29:02 +10:00
Pierre Kancir 579f655e76 SIM_Aircraft: change define in favor of static constexpr 2017-06-07 20:29:02 +10:00
Pierre Kancir 22dd81e298 AP_HAL_SITL: rangefinder const correctness 2017-06-07 20:28:25 +10:00
Pierre Kancir 3f045a4905 AP_HAL_SITL: airspeed_simulated use is_zero 2017-06-07 20:28:25 +10:00
Pierre Kancir 148e84320b SITL: Sim_aircraft correct style 2017-06-07 20:28:25 +10:00
Pierre Kancir 4acf4538c7 AP_HAL_SITL: rangefinder don't adjust value from FDM on external data 2017-06-07 20:28:25 +10:00
Pierre Kancir 599e3d7b83 SITL: make range finder a standalone sitl plugin 2017-06-07 20:28:25 +10:00
Andrew Tridgell 0e27d4bd6f AP_Soaring: fixed Log_Write call 2017-06-07 20:10:20 +10:00
samuelctabor f6b3c00b19 AP_Soaring: Fix initialisers in SoaringController. In-line method to get altitude in Variometer. 2017-06-07 20:10:11 +10:00
samuelctabor 4cbff71689 AP_Soaring: Separate the vario functionality into a seperate class from the soaring/thermalling functionality. 2017-06-07 20:10:03 +10:00
Andrew Tridgell c9e140a946 AP_Terrain: removed unused variable 2017-06-07 19:59:14 +10:00
Michael du Breuil 3e2b5269a6 AP_Terrain: fix Coverity issue 91367
Also converts to using the get_relative_position_D_home() functions rather then attempting to derive home itself
2017-06-07 19:58:45 +10:00
Andrew Tridgell 6a01494d4a AP_HAL: fixed setting of HAL_MINIMIZE_FEATURES for FMUv3 2017-06-07 17:39:45 +10:00
Andrew Tridgell d946d5da6f AP_Compass: enable AK09916 inside a ICM20948
the ICM20948 has an AK09916 which can be accessed via I2C bypass
2017-06-07 17:39:45 +10:00
Lucas De Marchi eb70dbc6f5 AP_HAL: add HAL_OS_POSIX_IO for aerofc-v1
What aerofc-v1 doesn't have is an sdcard, but it has posix-like API as
it's running on top of NuttX.
2017-06-06 18:42:17 -07:00
murata ac8234cdf0 AP_Notify: Change to the value of boolean. 2017-06-07 08:06:44 +09:00
Randy Mackay 33ef3bd51d AP_Proximity: MAV driver gets distance validity check 2017-06-06 20:41:54 +09:00
Randy Mackay 1409f0ca7e DataFlash: rename CURR/CUR2 to BAT/BAT2 2017-06-06 14:57:04 +09:00
Randy Mackay 26845cc66a DataFlash: add resting voltage and resistance to current logging
also log cell voltages in separate message
2017-06-06 14:57:04 +09:00
Leonard Hall 9e86732edc AP_Motors: accept external battery resistance estimate 2017-06-06 14:57:04 +09:00
Randy Mackay 7a2d8fd5fd AP_BattMonitor: add has_cell_voltages method 2017-06-06 14:57:04 +09:00
Randy Mackay 6d8dc0fccf AP_BattMonitor: replace int with uint8_t
non-functional change
2017-06-06 14:57:04 +09:00
Leonard Hall d5e898156f AP_BattMonitor: allow using resting voltage for failsafe 2017-06-06 14:57:04 +09:00
Leonard Hall 8709fe58ec AP_BattMonitor: resistance learning 2017-06-06 14:57:04 +09:00
Randy Mackay f64777849f AP_BattMonitor: rename VOLT_TIMER to LOW_TIMER 2017-06-06 14:57:04 +09:00
Randy Mackay 989677ddfd AP_BattMonitor: move has_current to backend 2017-06-06 14:57:04 +09:00
Matt f02bfab7fe AP_Notify: OreoLED rework
Reworked the process flow.  Created the aviation vs rover themes.
Created visual operator feedback for prearm checks, GPS, EKF, gyro init,
radio failsafe, and low battery. This also includes work by Hugh Eaves
to open up the full extended properties of the Oreo LEDs.  Not only are
far more functions available, but you can override and do custom things
via mavlink.
2017-06-06 12:59:03 +09:00
Matt 34d305083d AP_Notify: Complete rework of notify device selection
Jaime did the hard work on this one.  He reworked notify device
selection to take place on init rather than on compile like before.  The
notify decivces are mostly set on compile using preprocessor directives
based on board type.  I created NTF_OREO_THEME.  This will allow the
user to enable/disable the OreoLED driver. And it also allows you to
select between aircraft and rover lighting themes. This allows the Solo
to use the OreoLEDs, and doesn't waste the memory on vehicles not
equipped with Oreo LEDs. The OreoLED driver is restricted to Pixhawk 2
FCs by proprocessor directive due to memory constraints. So it will
never work by accident on another board.

There is also a new notify flag for GPS Fusion.  This flag is true when
the EKF is happy with the GPS, actively using it for position
information.
2017-06-06 12:58:28 +09:00
Matt 6354ca7096 AP_AHRS: Set the new gps_fusion notify flag
Uses EKF filter state to set the new gps_fusion notify flag. This allows
the GCS and notify devices to specifically be notified if the GPS is or
is not usable.
2017-06-06 10:38:42 +09:00
Matt 545e417348 AP_Notify: Remove solo specific tones, align with px4 tones
Evaluated solo specific tones file vs standard px4 tones files.  The
only thing the Solo had that standard ArduPilot does not have is the GPS
unplugged tone and the power off tone.
* Some tones have a different tune, which is fine. We want the Solo to
sound like ArduPilot if it is running ArduPilot.
* GPS unplugged tone abandoned. Determined to be unnecessary.
* Power off tone merged into standard px4 tones file. Smart battery
signalling a power off will make use of this tone. Has application for
any smart battery equipped vehicle, not just Solo.
* Removed all references and dependencies to `ToneAlarm_PX4_Solo.cpp`
and `ToneAlarm_PX4_Solo.h`
* Deleted `ToneAlarm_PX4_Solo.cpp` and `ToneAlarm_PX4_Solo.h` since
they're no longer needed.
2017-06-06 10:38:40 +09:00
Dr.-Ing. Amilcar Do Carmo Lucas 65cca6ae87 SRV_Channel: Improve the PWM parameters descriptions 2017-06-06 11:06:26 +10:00
Dr.-Ing. Amilcar Do Carmo Lucas ed07d5b5c9 RC_Channel: Improve the PWM parameters descriptions 2017-06-06 11:06:26 +10:00
Dr.-Ing. Amilcar Do Carmo Lucas 2c867ec362 AP_RSSI: Improve the PWM parameters descriptions 2017-06-06 11:06:26 +10:00
Dr.-Ing. Amilcar Do Carmo Lucas 89a0d2aa3b AP_Parachute: Improve the PWM parameters descriptions 2017-06-06 11:06:26 +10:00
Dr.-Ing. Amilcar Do Carmo Lucas 1b062d9d29 AP_Motors: Improve the PWM parameters descriptions 2017-06-06 11:06:26 +10:00
Dr.-Ing. Amilcar Do Carmo Lucas eebf26ed9f AP_LandingGear: Improve the PWM parameters descriptions 2017-06-06 11:06:26 +10:00
Dr.-Ing. Amilcar Do Carmo Lucas d1f9633ed2 AP_Landing: Improve the PWM parameters descriptions 2017-06-06 11:06:26 +10:00
Dr.-Ing. Amilcar Do Carmo Lucas 1ad5e58eb7 AP_Gripper: Improve the PWM parameters descriptions 2017-06-06 11:06:26 +10:00
Dr.-Ing. Amilcar Do Carmo Lucas 67620e87f0 AP_Camera: Improve the PWM parameters descriptions 2017-06-06 11:06:26 +10:00
Jonathan Challinger 2e07f8824e AP_Motors: reserve parameter index 38 2017-06-06 08:45:37 +09:00
Peter Barker d56eca036d AC_AttitudeControl: correct parameter markup 2017-06-05 21:02:30 +10:00
priseborough 1985dcd366 AP_NavEKF2: Fix bug in declination fusion 2017-06-03 15:16:25 +01:00
Lucas De Marchi 2e096d76c6 sparse-endian: avoid clash with linux/types.h
On recent kernels (>= 4.10) __bitwise is defined on the header. Avoid
warning about redefining it.
2017-06-02 11:26:02 -07:00
Michael du Breuil 6830a8b86c AccelCal: Continously report success/failure to the GCS that requested the calibration 2017-06-01 20:20:05 +01:00
Michael du Breuil c62e79b5c0 GCS_MAVLink: Update the accelcal signature to accept uint32_t 2017-06-01 20:20:05 +01:00
mirkix 478fb60a5b AP_HAL: BeagleBone Blue fix HMC5843 I2C bus number 2017-06-01 17:11:34 +01:00
mirkix d9d3d97e54 AP_Compass: BeagleBone Blue add external compass HMC5843 2017-06-01 17:11:34 +01:00
Leonard Hall 447b20efa5 AP_InertialSensor: reduce accel filter to 10hz 2017-06-01 14:53:48 +09:00
Leonard Hall ad74769fb7 AC_AttControl: adjust default rate IMAX and Yaw Filt
Increase Roll, Pitch and Yaw IMAX from 0.444 or 0.222 to 0.5
Decrease Yaw Filter from 5hz to 2.5hz based on the results of autotunes on many vehicles which always seems to produce values between 2 and 3hz
2017-06-01 10:08:41 +09:00
Michael du Breuil ffe701bda3 AP_GPS: Use a static assert to check that the init blob is small enough 2017-05-31 14:39:53 +01:00
Randy Mackay 0b7ec0dc64 AP_Proximity: validate range finder distances 2017-05-31 16:26:42 +09:00
Michael du Breuil 1877d09f7c AP_GPS: Don't track detection time to broadcast baud rate 2017-05-30 23:37:59 +01:00
Michael du Breuil 84598544fb AP_GPS: Don't autodetect NMEA instances 2017-05-30 23:37:59 +01:00
Michael du Breuil f026438f22 AP_BattMonitor: Fetch remaining capacity 2017-05-30 20:28:12 +09:00
Dr.-Ing. Amilcar Do Carmo Lucas f7a683d38e AP_BoardConfig: remove redundant BRD_ prefix, it also made this parameter 17 characters long 2017-05-30 12:09:02 +09:00
Michael du Breuil 2cd6ff6dd5 AP_Math: Accept float epsilon in is_positive is_negative as a valid result 2017-05-27 10:46:59 -07:00
murata c21b586ccc SITL: add dodeca-hexa support 2017-05-27 14:21:13 +09:00
murata 66fc49889b AP_Motors: add dodeca-hexa 2017-05-27 14:21:13 +09:00
Randy Mackay d00725b2ed AP_Motors: rc_write handles motors 9 to 12 2017-05-27 14:21:13 +09:00
Randy Mackay 544d6aa8a0 SRV_Channel: define aux functions for motors 9 to 12 2017-05-27 14:21:13 +09:00
Dr.-Ing. Amilcar Do Carmo Lucas bf4a505494 AP_SerialMananger: Add missing @RebootRequired: True 2017-05-27 01:55:55 +01:00
Dr.-Ing. Amilcar Do Carmo Lucas 3f6059397c AP_NavEKF2: Add missing @RebootRequired: True 2017-05-27 01:55:55 +01:00
Michael du Breuil a1479c4138 AP_GPS: SBF report driver lag 2017-05-26 17:42:15 +01:00
Michael du Breuil 3da3ad05bf AP_GPS: SBF report velocity accuracy 2017-05-26 17:42:15 +01:00
murata 75f744591e AP_Avoidance: Change the determination place of the index value. 2017-05-25 23:23:16 +01:00
Michael du Breuil c7a89d5aa0 AP_GPS: Set unknown DOP's to UINT16_MAX, rather then 9999
This fixes the MAVLink reporting for unknown dops, and avoids the situation where a GPS driver could report a worse DOP then we could handle.

Also corrects an apparent error in the HIL_GPS MAVLink message, where we would always select the unknown dop value rather then provided DOP.
2017-05-25 11:03:33 -07:00
Michael du Breuil 26ff1acf55 Landing: Deepstall print travel distances
The distances are used for doing log analysis on the prediction numbers.
2017-05-24 15:22:27 -07:00
Michael du Breuil 16bd7a091e GCS_MAVLink: Add landing reporting 2017-05-24 15:22:27 -07:00
Michael du Breuil 1e735324d4 AP_Landing: Add MAVLink reporting interface 2017-05-24 15:22:27 -07:00
Michael du Breuil 5a15413513 AP_Math: Add is_negative and is_positive helpers 2017-05-24 15:22:27 -07:00
Michael du Breuil 397ae00526 AP_GPS: SBF report VDOP 2017-05-24 20:03:29 +01:00
Michael du Breuil 7e5aa5bc4c AP_Mission: Prohibit resuming mission waypoints that are no longer in the mission 2017-05-24 10:19:56 -07:00
Andrew Tridgell a3cb6a42c9 AP_BoardConfig: drop target temperature for cube to 45
getting to 60 was taking far too long (15 minutes or so). 45 is more
achievable.

This is a result of the fix to the invensense temperature detection
code
2017-05-24 08:41:16 +10:00
Andrew Tridgell 9e74bfbc20 AP_BoardConfig: cope with bad config of pixhawk2
don't allow FMUv2 firmware on cube, and force temperature if incorrect
2017-05-24 08:41:16 +10:00
Lucas De Marchi ee0f46e3aa AP_HAL_Linux: RCInput_RPI: ignore unwanted signals
We are setting a termination handler for some signals which are of not
interest.  Just ignore them.  Ignoring SIGWINCH allows for example to
run on a screen and change the window size later without killing
ardupilot.
2017-05-23 09:09:51 +10:00
Lucas De Marchi e803045d1f AP_HAL_Linux: Scheduler: increase stack for scheduler threads
RPI-based boards that use RCInput_RPI need more stack space otherwise we
end up with stack corruption. This leads to crash particularly when also
using GPIO_RPI since it may change what that driver is poking on memory.

This increases stack size to 1M which is overkill for most of other
boards with a more controllable stack usage. However this exposes that
on multiple different HWs a single point for stack size decision may not
be the best.  This can be improved in future.
2017-05-23 09:09:51 +10:00
Francisco Ferreira 9c027713d1
AP_BattMonitor: update current/voltage parameter documentation
Remove information for old APM boards
Correct information for The Cube (Pixhawk 2.1) Power2 port
2017-05-19 01:19:23 +01:00
Dr.-Ing. Amilcar Do Carmo Lucas 079d2ff3be AC_WPNav: correct min limit 2017-05-18 20:48:50 +09:00
Randy Mackay a1a5c9f239 AC_WPNav: sanity check wpnav-radius
Occasionally users accidentally set the wpnav-radius to 0 and the vehicle gets stuck at waypoints
2017-05-18 12:25:47 +09:00
Dr.-Ing. Amilcar Do Carmo Lucas c1eb9fb9c3 AP_NavEKF3: Spell in comments 2017-05-18 09:29:55 +09:00
Dr.-Ing. Amilcar Do Carmo Lucas 5e938c8cc0 SRV_Channel: Use SI units conventions in parameter units
Follow the rules from:
http://physics.nist.gov/cuu/Units/units.html
http://physics.nist.gov/cuu/Units/outside.html
and
http://physics.nist.gov/cuu/Units/checklist.html
one further constrain is that only printable (7bit) ASCII characters are allowed
2017-05-17 18:07:25 +10:00
Dr.-Ing. Amilcar Do Carmo Lucas 8661bdda8a RC_Channel: Use SI units conventions in parameter units
Follow the rules from:
http://physics.nist.gov/cuu/Units/units.html
http://physics.nist.gov/cuu/Units/outside.html
and
http://physics.nist.gov/cuu/Units/checklist.html
one further constrain is that only printable (7bit) ASCII characters are allowed
2017-05-17 18:07:25 +10:00
Dr.-Ing. Amilcar Do Carmo Lucas 26771f5348 AP_Terrain: Use SI units conventions in parameter units
Follow the rules from:
http://physics.nist.gov/cuu/Units/units.html
http://physics.nist.gov/cuu/Units/outside.html
and
http://physics.nist.gov/cuu/Units/checklist.html
one further constrain is that only printable (7bit) ASCII characters are allowed
2017-05-17 18:07:25 +10:00
Dr.-Ing. Amilcar Do Carmo Lucas c417376ba8 AP_Stats: Use SI units conventions in parameter units
Follow the rules from:
http://physics.nist.gov/cuu/Units/units.html
http://physics.nist.gov/cuu/Units/outside.html
and
http://physics.nist.gov/cuu/Units/checklist.html
one further constrain is that only printable (7bit) ASCII characters are allowed
2017-05-17 18:07:25 +10:00
Dr.-Ing. Amilcar Do Carmo Lucas b4244efb87 AP_Soaring: Use SI units conventions in parameter units
Follow the rules from:
http://physics.nist.gov/cuu/Units/units.html
http://physics.nist.gov/cuu/Units/outside.html
and
http://physics.nist.gov/cuu/Units/checklist.html
one further constrain is that only printable (7bit) ASCII characters are allowed
2017-05-17 18:07:25 +10:00
Dr.-Ing. Amilcar Do Carmo Lucas 78b7207ab4 AP_RangeFinder: Use SI units conventions in parameter units
Follow the rules from:
http://physics.nist.gov/cuu/Units/units.html
http://physics.nist.gov/cuu/Units/outside.html
and
http://physics.nist.gov/cuu/Units/checklist.html
one further constrain is that only printable (7bit) ASCII characters are allowed
2017-05-17 18:07:25 +10:00
Dr.-Ing. Amilcar Do Carmo Lucas a1de89a812 AP_Rally: Use SI units conventions in parameter units
Follow the rules from:
http://physics.nist.gov/cuu/Units/units.html
http://physics.nist.gov/cuu/Units/outside.html
and
http://physics.nist.gov/cuu/Units/checklist.html
one further constrain is that only printable (7bit) ASCII characters are allowed
2017-05-17 18:07:25 +10:00
Dr.-Ing. Amilcar Do Carmo Lucas 2b5d33fa07 AP_RSSI: Use SI units conventions in parameter units
Follow the rules from:
http://physics.nist.gov/cuu/Units/units.html
http://physics.nist.gov/cuu/Units/outside.html
and
http://physics.nist.gov/cuu/Units/checklist.html
one further constrain is that only printable (7bit) ASCII characters are allowed
2017-05-17 18:07:25 +10:00
Dr.-Ing. Amilcar Do Carmo Lucas adc919c7fc AP_Proximity: Use SI units conventions in parameter units
Follow the rules from:
http://physics.nist.gov/cuu/Units/units.html
http://physics.nist.gov/cuu/Units/outside.html
and
http://physics.nist.gov/cuu/Units/checklist.html
one further constrain is that only printable (7bit) ASCII characters are allowed
2017-05-17 18:07:25 +10:00
Dr.-Ing. Amilcar Do Carmo Lucas 5a2a82437a AP_Parachute: Use SI units conventions in parameter units
Follow the rules from:
http://physics.nist.gov/cuu/Units/units.html
http://physics.nist.gov/cuu/Units/outside.html
and
http://physics.nist.gov/cuu/Units/checklist.html
one further constrain is that only printable (7bit) ASCII characters are allowed
2017-05-17 18:07:25 +10:00
Dr.-Ing. Amilcar Do Carmo Lucas d3a57b5965 AP_NavEKF3: Use SI units conventions in parameter units
Follow the rules from:
http://physics.nist.gov/cuu/Units/units.html
http://physics.nist.gov/cuu/Units/outside.html
and
http://physics.nist.gov/cuu/Units/checklist.html
one further constrain is that only printable (7bit) ASCII characters are allowed
2017-05-17 18:07:25 +10:00
Dr.-Ing. Amilcar Do Carmo Lucas 38b19b9eee AP_NavEKF2: Use SI units conventions in parameter units
Follow the rules from:
http://physics.nist.gov/cuu/Units/units.html
http://physics.nist.gov/cuu/Units/outside.html
and
http://physics.nist.gov/cuu/Units/checklist.html
one further constrain is that only printable (7bit) ASCII characters are allowed
2017-05-17 18:07:25 +10:00
Dr.-Ing. Amilcar Do Carmo Lucas 823bf217d9 AP_Mount: Use SI units conventions in parameter units
Follow the rules from:
http://physics.nist.gov/cuu/Units/units.html
http://physics.nist.gov/cuu/Units/outside.html
and
http://physics.nist.gov/cuu/Units/checklist.html
one further constrain is that only printable (7bit) ASCII characters are allowed
2017-05-17 18:07:25 +10:00
Dr.-Ing. Amilcar Do Carmo Lucas 9d9ebc91cd AP_Motors: Use SI units conventions in parameter units
Follow the rules from:
http://physics.nist.gov/cuu/Units/units.html
http://physics.nist.gov/cuu/Units/outside.html
and
http://physics.nist.gov/cuu/Units/checklist.html
one further constrain is that only printable (7bit) ASCII characters are allowed
2017-05-17 18:07:25 +10:00
Dr.-Ing. Amilcar Do Carmo Lucas 44eca002f0 AP_LandingGear: Use SI units conventions in parameter units
Follow the rules from:
http://physics.nist.gov/cuu/Units/units.html
http://physics.nist.gov/cuu/Units/outside.html
and
http://physics.nist.gov/cuu/Units/checklist.html
one further constrain is that only printable (7bit) ASCII characters are allowed
2017-05-17 18:07:25 +10:00
Dr.-Ing. Amilcar Do Carmo Lucas 2a16c20ce1 AP_Landing: Use SI units conventions in parameter units
Follow the rules from:
http://physics.nist.gov/cuu/Units/units.html
http://physics.nist.gov/cuu/Units/outside.html
and
http://physics.nist.gov/cuu/Units/checklist.html
one further constrain is that only printable (7bit) ASCII characters are allowed
2017-05-17 18:07:25 +10:00
Dr.-Ing. Amilcar Do Carmo Lucas 5a9baaa8b3 AP_L1_Control: Use SI units conventions in parameter units
Follow the rules from:
http://physics.nist.gov/cuu/Units/units.html
http://physics.nist.gov/cuu/Units/outside.html
and
http://physics.nist.gov/cuu/Units/checklist.html
one further constrain is that only printable (7bit) ASCII characters are allowed
2017-05-17 18:07:25 +10:00
Dr.-Ing. Amilcar Do Carmo Lucas 6ac8aeff05 AP_ICEngine: Use SI units conventions in parameter units
Follow the rules from:
http://physics.nist.gov/cuu/Units/units.html
http://physics.nist.gov/cuu/Units/outside.html
and
http://physics.nist.gov/cuu/Units/checklist.html
one further constrain is that only printable (7bit) ASCII characters are allowed
2017-05-17 18:07:25 +10:00
Dr.-Ing. Amilcar Do Carmo Lucas c892555c17 AP_Gripper: Use SI units conventions in parameter units
Follow the rules from:
http://physics.nist.gov/cuu/Units/units.html
http://physics.nist.gov/cuu/Units/outside.html
and
http://physics.nist.gov/cuu/Units/checklist.html
one further constrain is that only printable (7bit) ASCII characters are allowed
2017-05-17 18:07:25 +10:00
Dr.-Ing. Amilcar Do Carmo Lucas 2d5033b132 AP_GPS: Use SI units conventions in parameter units
Follow the rules from:
http://physics.nist.gov/cuu/Units/units.html
http://physics.nist.gov/cuu/Units/outside.html
and
http://physics.nist.gov/cuu/Units/checklist.html
one further constrain is that only printable (7bit) ASCII characters are allowed
2017-05-17 18:07:25 +10:00
Dr.-Ing. Amilcar Do Carmo Lucas 4c45b1c7ca AP_Compass: Use SI units conventions in parameter units
Follow the rules from:
http://physics.nist.gov/cuu/Units/units.html
http://physics.nist.gov/cuu/Units/outside.html
and
http://physics.nist.gov/cuu/Units/checklist.html
one further constrain is that only printable (7bit) ASCII characters are allowed
2017-05-17 18:07:25 +10:00
Dr.-Ing. Amilcar Do Carmo Lucas 41a9402175 AP_Camera: Use SI units conventions in parameter units
Follow the rules from:
http://physics.nist.gov/cuu/Units/units.html
http://physics.nist.gov/cuu/Units/outside.html
and
http://physics.nist.gov/cuu/Units/checklist.html
one further constrain is that only printable (7bit) ASCII characters are allowed
2017-05-17 18:07:25 +10:00
Dr.-Ing. Amilcar Do Carmo Lucas a85b7af32d AP_BoardConfig: Use SI units conventions in parameter units
Follow the rules from:
http://physics.nist.gov/cuu/Units/units.html
http://physics.nist.gov/cuu/Units/outside.html
and
http://physics.nist.gov/cuu/Units/checklist.html
one further constrain is that only printable (7bit) ASCII characters are allowed
2017-05-17 18:07:25 +10:00
Dr.-Ing. Amilcar Do Carmo Lucas 24aa52a24d AP_Beacon: Use SI units conventions in parameter units
Follow the rules from:
http://physics.nist.gov/cuu/Units/units.html
http://physics.nist.gov/cuu/Units/outside.html
and
http://physics.nist.gov/cuu/Units/checklist.html
one further constrain is that only printable (7bit) ASCII characters are allowed
2017-05-17 18:07:25 +10:00
Dr.-Ing. Amilcar Do Carmo Lucas 25cfee9824 AP_BattMonitor: Use SI units conventions in parameter units
Follow the rules from:
http://physics.nist.gov/cuu/Units/units.html
http://physics.nist.gov/cuu/Units/outside.html
and
http://physics.nist.gov/cuu/Units/checklist.html
one further constrain is that only printable (7bit) ASCII characters are allowed
2017-05-17 18:07:25 +10:00
Dr.-Ing. Amilcar Do Carmo Lucas ed916327fc AP_Baro: Use SI units conventions in parameter units
Follow the rules from:
http://physics.nist.gov/cuu/Units/units.html
http://physics.nist.gov/cuu/Units/outside.html
and
http://physics.nist.gov/cuu/Units/checklist.html
one further constrain is that only printable (7bit) ASCII characters are allowed
2017-05-17 18:07:25 +10:00
Dr.-Ing. Amilcar Do Carmo Lucas 8bd51fa068 AP_Avoidance: Use SI units conventions in parameter units
Follow the rules from:
http://physics.nist.gov/cuu/Units/units.html
http://physics.nist.gov/cuu/Units/outside.html
and
http://physics.nist.gov/cuu/Units/checklist.html
one further constrain is that only printable (7bit) ASCII characters are allowed
2017-05-17 18:07:25 +10:00
Dr.-Ing. Amilcar Do Carmo Lucas 9941e910ee AP_Arming: Use SI units conventions in parameter units
Follow the rules from:
http://physics.nist.gov/cuu/Units/units.html
http://physics.nist.gov/cuu/Units/outside.html
and
http://physics.nist.gov/cuu/Units/checklist.html
one further constrain is that only printable (7bit) ASCII characters are allowed
2017-05-17 18:07:25 +10:00
Dr.-Ing. Amilcar Do Carmo Lucas 4b49a84d8e AP_AdvancedFailsafe: Use SI units conventions in parameter units
Follow the rules from:
http://physics.nist.gov/cuu/Units/units.html
http://physics.nist.gov/cuu/Units/outside.html
and
http://physics.nist.gov/cuu/Units/checklist.html
one further constrain is that only printable (7bit) ASCII characters are allowed
2017-05-17 18:07:25 +10:00
Dr.-Ing. Amilcar Do Carmo Lucas 98a43cc4b5 AP_AHRS: Use SI units conventions in parameter units
Follow the rules from:
http://physics.nist.gov/cuu/Units/units.html
http://physics.nist.gov/cuu/Units/outside.html
and
http://physics.nist.gov/cuu/Units/checklist.html
one further constrain is that only printable (7bit) ASCII characters are allowed
2017-05-17 18:07:25 +10:00
Dr.-Ing. Amilcar Do Carmo Lucas 0f5d1ae2dd APM_Control: Use SI units conventions in parameter units
Follow the rules from:
http://physics.nist.gov/cuu/Units/units.html
http://physics.nist.gov/cuu/Units/outside.html
and
http://physics.nist.gov/cuu/Units/checklist.html
one further constrain is that only printable (7bit) ASCII characters are allowed
2017-05-17 18:07:25 +10:00
Dr.-Ing. Amilcar Do Carmo Lucas 087b5b89f0 AC_Sprayer: Use SI units conventions in parameter units
Follow the rules from:
http://physics.nist.gov/cuu/Units/units.html
http://physics.nist.gov/cuu/Units/outside.html
and
http://physics.nist.gov/cuu/Units/checklist.html
one further constrain is that only printable (7bit) ASCII characters are allowed
2017-05-17 18:07:25 +10:00
Dr.-Ing. Amilcar Do Carmo Lucas de56459887 AC_PrecLand: Use SI units conventions in parameter units
Follow the rules from:
http://physics.nist.gov/cuu/Units/units.html
http://physics.nist.gov/cuu/Units/outside.html
and
http://physics.nist.gov/cuu/Units/checklist.html
one further constrain is that only printable (7bit) ASCII characters are allowed
2017-05-17 18:07:25 +10:00
Dr.-Ing. Amilcar Do Carmo Lucas 1c300fa8a1 AC_InputMananger: Use SI units conventions in parameter units
Follow the rules from:
http://physics.nist.gov/cuu/Units/units.html
http://physics.nist.gov/cuu/Units/outside.html
and
http://physics.nist.gov/cuu/Units/checklist.html
one further constrain is that only printable (7bit) ASCII characters are allowed
2017-05-17 18:07:25 +10:00
Dr.-Ing. Amilcar Do Carmo Lucas 9ac429ab13 AC_Fence: Use SI units conventions in parameter units
Follow the rules from:
http://physics.nist.gov/cuu/Units/units.html
http://physics.nist.gov/cuu/Units/outside.html
and
http://physics.nist.gov/cuu/Units/checklist.html
one further constrain is that only printable (7bit) ASCII characters are allowed
2017-05-17 18:07:25 +10:00
Dr.-Ing. Amilcar Do Carmo Lucas 823bee8a31 AC_Avoidance: Use SI units conventions in parameter units
Follow the rules from:
http://physics.nist.gov/cuu/Units/units.html
http://physics.nist.gov/cuu/Units/outside.html
and
http://physics.nist.gov/cuu/Units/checklist.html
one further constrain is that only printable (7bit) ASCII characters are allowed
2017-05-17 18:07:25 +10:00
Dr.-Ing. Amilcar Do Carmo Lucas 188dfb6936 AC_AttitudeControl: Use SI units conventions in parameter units
Follow the rules from:
http://physics.nist.gov/cuu/Units/units.html
http://physics.nist.gov/cuu/Units/outside.html
and
http://physics.nist.gov/cuu/Units/checklist.html
one further constrain is that only printable (7bit) ASCII characters are allowed
2017-05-17 18:07:25 +10:00
Dr.-Ing. Amilcar Do Carmo Lucas 9cb068d3f4 AP_NavEKF3: Spell in coments 2017-05-16 20:29:16 +09:00
Dr.-Ing. Amilcar Do Carmo Lucas 95b09bc19e AP_Arming: fix a spell error in a parameter description
fix { indentation
2017-05-16 20:29:16 +09:00
Randy Mackay 2fcb4932b7 AP_Beacon: minor formatting fixes for marvelmind 2017-05-16 15:27:48 +09:00
Karthik Desai 5060ebe626 AP_Beacon: order the stationary beacons in ascending order of address 2017-05-16 15:27:37 +09:00
Karthik Desai 8a5fcc82bd AP_Beacon: transform Marvelmind ENU to ArduPilot NED coordinates
Cache beacon positions to speed-up distance calculations
Only pass data to EKF after both hedgehog and beacon positions are known
Add license and credit Marvelmind
Re-order code around to minimize diff with upstream marvelmind code
Integrated review requests
2017-05-16 15:27:09 +09:00
Dr.-Ing. Amilcar Do Carmo Lucas 119696bea3 AP_Beacon: added units in the comments documentation, to make the API easier to use 2017-05-16 14:46:07 +09:00
karthik.desai 8f7b9323d2 AP_SerialManager: Rename Pozyx Beacon to Beacon 2017-05-16 14:46:05 +09:00
Michael du Breuil 64fb09fb38 AP_Landing: Add an interface to poll if we should be setting fly_forward in AHRS 2017-05-15 14:50:29 -07:00
Michael du Breuil d80aecfd2d AP_Landing: Deepstall: Recompute approach heading until breakout
Also enforces a minimum approach length, which is needed to ensure that the
aircraft doesn't do a 180 degree turn part way through the approach to land
on the target.
2017-05-15 14:50:29 -07:00
Dr.-Ing. Amilcar Do Carmo Lucas 6c14f498f7 AP_Proximity: Add missing @RebootRequired: True 2017-05-15 21:51:19 +09:00
murata 46cba2c970 libraries: Delete the setting value for specific editor. 2017-05-11 13:18:41 -07:00
murata 10c446f69d AP_Motors: Fit the indent column to the coding style. 2017-05-11 13:18:41 -07:00
Peter Barker b18c1853f9 GCS_MAVLink: count parameters in param thread
This helps avoid counting parameters on the main thread,
avoiding long-loops
2017-05-11 08:21:17 +10:00
Sriram Sami 379005ebc7 AP_Motors: Fix comment on expected variable range
the move_actuators function in AP_MotorsHeli_Dual previously
indicated incorrect ranges for its input variables.
2017-05-09 17:41:26 +09:00
Andrew Tridgell 46d9a1dcb5 AP_Motors: fixed tricopter tail servo in fwd flight
in quadplane forward flight the with tilt-tricopter tail servo needs to
be at its trim position. Thanks to Marco for noticing this.
2017-05-09 08:59:00 +09:00
Andrew Tridgell b6568b1c7e AP_AHRS: support set_origin and get_origin for EKF 10 2017-05-08 13:38:10 +10:00
Andrew Tridgell 47b79eb72d SITL: expose home location 2017-05-08 13:38:10 +10:00
Peter Barker 57c0551260 AP_Notify: remove non-required initialisation of variables
These objects are dynamically allocated, and we zero the memory
as we allocate them
2017-05-08 10:29:25 +09:00
Peter Barker ec37d863bc AP_Notify: simplify scrolling code 2017-05-08 10:29:22 +09:00
Peter Barker b1ef778215 AP_TemperatureSensor: use HAL_SEMAPHORE_BLOCK_FOREVER macro 2017-05-08 10:23:03 +09:00
Peter Barker 6bb75a730f AP_HAL_QURT: use HAL_SEMAPHORE_BLOCK_FOREVER macro 2017-05-08 10:23:03 +09:00
Peter Barker 7ce353e652 AP_HAL_PX4: use HAL_SEMAPHORE_BLOCK_FOREVER macro 2017-05-08 10:23:03 +09:00
Peter Barker c78f3b9e78 AP_HAL_Linux: use HAL_SEMAPHORE_BLOCK_FOREVER macro 2017-05-08 10:23:03 +09:00
Peter Barker e9ce3aa0ce AP_GPS: use HAL_SEMAPHORE_BLOCK_FOREVER macro 2017-05-08 10:23:03 +09:00
Peter Barker b39da462ec AP_Compass: use HAL_SEMAPHORE_BLOCK_FOREVER macro 2017-05-08 10:23:03 +09:00
Peter Barker ccc495e4c1 AP_Baro: use HAL_SEMAPHORE_BLOCK_FOREVER macro 2017-05-08 10:23:03 +09:00
Dr.-Ing. Amilcar Do Carmo Lucas e31ac00f26 AP_GPS: fix spelling in comments 2017-05-08 10:08:31 +09:00
Andrew Tridgell bdc4320fe8 AP_Motors: added MOT_BOOST_SCALE
this is to support boost motors for copters, such as having a petrol
motor for extra lift on a multicopter

The scaling factor allows the user to control how much of the lift is
generated from the booster and how much from the main multicopter
motors
2017-05-08 11:02:55 +10:00
Andrew Tridgell 2168222d4b SRV_Channel: added throttle_boot output function 2017-05-08 11:02:55 +10:00
Andrew Tridgell d9223165c7 AP_AHRS: fixed get_accel_ef_blended() for SITL EKF 10 2017-05-07 09:10:44 +10:00
Andrew Tridgell 1f847132d7 AP_Motors: setup limits flags for tailsitters 2017-05-07 09:10:44 +10:00
Andrew Tridgell 3018728f50 AP_UAVCAN: rename macros to avoid conflicts 2017-05-06 15:21:14 +10:00
Andrew Tridgell db64da7856 AP_TemperatureSensor: rename macros to avoid conflicts
these macros were also defined in NuttX in clock.h
2017-05-06 15:21:14 +10:00
Andrew Tridgell 607220d12b AP_Math: rename macros to avoid conflicts
these macros were also defined in NuttX in clock.h
2017-05-06 15:21:14 +10:00
Andrew Tridgell e51bbcebec AP_HAL_SITL: rename macros to avoid conflicts
these macros were also defined in NuttX in clock.h
2017-05-06 15:21:14 +10:00
Andrew Tridgell b72532164b AP_HAL_PX4: rename macros to avoid conflicts
these macros were also defined in NuttX in clock.h
2017-05-06 15:21:14 +10:00
Andrew Tridgell 279c1b9d9c AP_HAL_Linux: rename macros to avoid conflicts
these macros were also defined in NuttX in clock.h
2017-05-06 15:21:14 +10:00
Andrew Tridgell 3687b6bdf0 AP_GPS: rename macros to avoid conflicts
these macros were also defined in NuttX in clock.h
2017-05-06 15:21:14 +10:00
Andrew Tridgell 45f27ceb9c AP_Compass: rename macros to avoid conflicts
these macros were also defined in NuttX in clock.h
2017-05-06 15:21:14 +10:00
Andrew Tridgell 71158e3e74 AP_Common: added #pragma once 2017-05-06 15:21:14 +10:00
Andrew Tridgell 375c7b0f5f AP_Baro: rename macros to avoid conflicts
these macros were also defined in NuttX in clock.h
2017-05-06 15:21:14 +10:00
Andrew Tridgell 7b73004882 AP_Airspeed: added ARSPD_USE=2 for gliders 2017-05-04 22:59:02 -07:00
mirkix db7cf388f2 AP_Notify: enable display for BeagleBone Blue 2017-05-04 16:25:06 -07:00
Pierre Kancir 67e79a30e8 SRV_Channel: limit pwm_from_angle return to +/-high_out 2017-05-04 21:12:15 +10:00
Andrew Tridgell 9bdf971336 AP_Baro: added set_pressure_correction()
for use by AP_TempCalibration
2017-05-03 20:12:04 +10:00
Andrew Tridgell 99883ffc49 AP_Baro: added temperature sensitivity modelling in SITL 2017-05-03 20:12:04 +10:00
Andrew Tridgell d50dcb5ad2 SITL: added SIM_TEMP_BFACTOR
for barometer temperature error
2017-05-03 20:12:04 +10:00
Andrew Tridgell ac82d1a65d HAL_SITL: moved SITL baro to AP_Baro_SITL 2017-05-03 20:12:04 +10:00
Andrew Tridgell ee4161fa62 AP_Baro: moved SITL baro to standard sensor backend model 2017-05-03 20:12:04 +10:00
Andrew Tridgell 62b826953d AP_InertialSensor: use AP_Math rand_float() 2017-05-03 20:12:04 +10:00
Andrew Tridgell 2fcecaa7c5 AP_Math: added rand_float() 2017-05-03 20:12:04 +10:00
Andrew Tridgell c1b6684b9f SITL: added temperature control parameters 2017-05-03 20:12:04 +10:00
Andrew Tridgell 7e24be95c9 AP_Param: added macro for var table extension in object 2017-05-03 20:12:04 +10:00
Andrew Tridgell 37166301c9 HAL_PX4: use sensor_config_error() 2017-05-03 11:37:02 +10:00
Andrew Tridgell cbea29ad71 AP_Baro: use sensor_config_error() 2017-05-03 11:37:01 +10:00
Andrew Tridgell e32e2f5b5d AP_BoardConfig: added sensor_config_error()
used to notify user of fatal sensor setup error
2017-05-03 11:37:01 +10:00
Randy Mackay bffc5daeb0 AC_WPNav: unset yaw when setting new origin and destination
This ensures that old yaw targets are not used in the short interval before they are initialised in advance_wp_target_along_track or advance_spline_along_track
2017-05-03 09:15:01 +09:00
Dr.-Ing. Amilcar Do Carmo Lucas 1691a39b36 AP_GPS: spell in comments 2017-05-03 08:45:08 +09:00
Dr.-Ing. Amilcar Do Carmo Lucas 23b7f1e645 AP_NavEKF3: Improve comments, typos 2017-05-03 08:45:01 +09:00
Dr.-Ing. Amilcar Do Carmo Lucas ce37517268 AP_NavEKF2: Improve comments, typos 2017-05-03 08:44:49 +09:00
Pierre Kancir a6eb337438 AP_Notify: remove unused variables 2017-05-02 18:14:40 +01:00
Andrew Tridgell bfd8d151c8 AP_InertialSensor: lower slave rate with fast sampling
On an invensense IMU with fast sampling we need to lower the slave
sample rate for slave sensors such as the built-in AK8963 compass on a
MPU9250.

The slave rate is set as a multiple of the main rate, so it needs to be
much lower for fast sampling. If we leave it high then it greatly
impacts on IMU sample rate.

Without this change a MPU9250 with fast sampling and a compass enabled
will give a gyro rate of around 7200Hz. With this change it gets 7760Hz
2017-05-02 12:11:08 +10:00
Peter Barker ece0e84ddf AP_Notify: reindent (NFC) 2017-05-02 08:50:41 +10:00
Peter Barker ce5739f1a0 AP_Notify: remove semaphores protecting pixels
The semaphore-take-forevers were absolutely killing performance.

We can take some random pixel corruption to avoid vehicles crashing.
2017-05-02 08:50:41 +10:00
Andrew Tridgell 519a293af9 AP_InertialSensor: fixed instance usage in set_gyro_oversampling()
thanks Francisco!
2017-05-02 08:27:11 +10:00
Andrew Tridgell 112b22516a AP_InertialSensor: fixed use of accel2_noise
thanks Francisco!
2017-05-02 08:24:50 +10:00
Peter Barker a3f4a523b2 AP_Notify: convert unknown characters to spaces 2017-05-01 16:21:55 +01:00
Peter Barker 5a02219642 AP_HAL_Linux: use HAL_SEMAPHORE_BLOCK_FOREVER 2017-05-01 15:05:51 +01:00
Peter Barker 3ff4cd8c07 AP_HAL_PX4: use HAL_SEMAPHORE_BLOCK_FOREVER 2017-05-01 15:05:51 +01:00
Peter Barker b11ca5d538 AP_HAL_QURT: use HAL_SEMAPHORE_BLOCK_FOREVER 2017-05-01 15:05:51 +01:00
Peter Barker 2f79a5bd90 AP_HAL_SITL: use HAL_SEMAPHORE_BLOCK_FOREVER 2017-05-01 15:05:51 +01:00
Peter Barker 85e5de15c4 AP_HAL_VRBRAIN: use HAL_SEMAPHORE_BLOCK_FOREVER 2017-05-01 15:05:51 +01:00
Dr.-Ing. Amilcar Do Carmo Lucas 5b67b33310 AP_GPS: Remove un-used AP_GPS::inject_data_all() function 2017-05-01 13:06:18 +01:00
Dr.-Ing. Amilcar Do Carmo Lucas 5261654756 AP_GPS: Only inject RTCM data to the selected GPS device defined in GPS_INJECT_TO parameter 2017-05-01 13:06:18 +01:00
Michael du Breuil 12f83ecf75 AP_GPS: SBF if RAW_DATA is enabled check that the GPS is succeeding at logging 2017-05-01 13:04:52 +01:00
Peter Barker ac1484f60e DataFlash: clear format sent mask when backend starts new log 2017-05-01 19:16:47 +10:00
Andrew Tridgell 2876f1467c AP_InertialSensor: converge sensor rate quickly, then slowly
converge fast for the first 60 seconds, then more slowly to reduce
noise
2017-05-01 15:13:56 +10:00
Andrew Tridgell db25b6e966 AP_InertialSensor: estimate and log sensor rates for all IMUs
this adds IMU.GHz and IMU.AHz log fields so we can see the actual
observed sensor rates of each IMU
2017-05-01 15:06:46 +10:00
Andrew Tridgell 0a83281a29 DataFlash: added logging of actual sensor rates 2017-05-01 15:06:46 +10:00
Andrew Tridgell 49cc0965c0 AP_InertialSensor: separate handling of FIFO and non-FIFO sensors
FIFO sensors produce data at a well known rate, but samples come in
bunches, so we can't use the system clock to calculate deltaT.

non-FIFO sensors produce data when we sample them, but that rate is
less regular due to timing jitter.

For FIFO sensors this changes makes us use a learned sample rate,
which allows for different clock speeds on sensor and system board.

For non-FIFO sensors we use the system clock to measure deltaT

the overall effect is a fix for sensors that produce samples at other
than the claimed datasheet rate.
2017-05-01 15:06:46 +10:00
Andrew Tridgell 74eb7a7243 AP_InertialSensor: make SITL sensor rate match a Pixhawk1
use 760Hz 2nd gyro and 800 Hz 2nd accel
2017-05-01 15:06:46 +10:00
Andrew Tridgell 25cd16a275 AP_InertialSensor: fixed LSM303D registered sample rate
we are running the LSM303D at 1600Hz, and are sampling it at 1kHz. We
need to tell the AP_InertialSensor layer that samples will arrive at 1kHz
2017-05-01 15:06:46 +10:00
Andrew Tridgell 28030dd85c AP_AHRS: use SIM_ODOM_ENABLE to enable visual odom in SITL 2017-05-01 15:06:46 +10:00
Andrew Tridgell 67404e9660 SITL: added SIM_ODOM_ENABLE
for enabling visual odomotry simulated data
2017-05-01 15:06:46 +10:00
Andrew Tridgell 56aa467d60 AP_Scheduler: adjust debug levels
this is more useful for performance analysis of scheduler, using perf
command
2017-05-01 15:02:34 +10:00
Andrew Tridgell 5c62e4f4c2 GCS_MAVLink: don't use more than 1ms sending parameters
this reduces the scheduling misses when fetching parameters initially
2017-05-01 14:37:15 +10:00
Andrew Tridgell f465c37c65 GCS_MAVLink: added async parameter sending 2017-05-01 14:37:13 +10:00
Andrew Tridgell 5c4ca3bf0b GCS_MAVLink: added send_queued_parameters() 2017-05-01 14:36:52 +10:00
Andrew Tridgell f778954b84 GCS_MAVLink: split parameter functions into a separate file 2017-05-01 14:36:10 +10:00
Andrew Tridgell 60e4c0eb98 AP_Param: make count_parameters() thread safe 2017-05-01 14:36:10 +10:00
Andrew Tridgell 84114d067a SRV_Channels: added SRV_Channels::enable_by_mask() 2017-05-01 14:32:18 +10:00
Andrew Tridgell 2c4975ba31 AP_Motors: removed cork/push from AP_Motors
should be done by vehicle code if needed, so that AUX servos are sent
at the same time
2017-05-01 14:32:18 +10:00
Andrew Tridgell 5c028897a3 HAL_VRBrain: cope with nested cork/push 2017-05-01 14:32:18 +10:00
Andrew Tridgell 266f99db93 HAL_QURT: cope with nested cork/push 2017-05-01 14:32:18 +10:00
Andrew Tridgell 9bdb6838e6 HAL_PX4: cope with nested cork/push 2017-05-01 14:32:18 +10:00
Andrew Tridgell 9b297ef5a1 HAL_Linux: fixed nested cork/push
don't generate extra pulse sets if we nest
2017-05-01 14:32:18 +10:00
Andrew Tridgell f257a869ac HAL_SITL: make cork/push safe to call nested 2017-05-01 14:32:18 +10:00
priseborough 2d4eee0cce AP_NavEKF2: documentation update 2017-05-01 14:24:55 +10:00
priseborough 4a898037e9 AP_NavEKF3: documentation update 2017-05-01 14:24:55 +10:00
Andrew Tridgell a04aff7a7d AP_NavEKF3: added inter-EKF scheduling cooperation
this changes the stragegy for load levelling between EKF cores so it
works between EK2 and EK3, and with future estimators as well.

It allows us to run EK3 and EK2 at the same time with good scheduling
performance
2017-05-01 14:24:55 +10:00
Andrew Tridgell 2de8777669 AP_NavEKF2: added inter-EKF scheduling cooperation
this changes the stragegy for load levelling between EKF cores so it
works between EK2 and EK3, and with future estimators as well.

It allows us to run EK3 and EK2 at the same time with good scheduling
performance
2017-05-01 14:24:55 +10:00
Andrew Tridgell e62fdad12c AP_InertialSensor: added get_last_update_usec()
this will be used by the inter-EKF scheduling changes
2017-05-01 14:24:55 +10:00
Andrew Tridgell e78f55ef9b AP_AHRS: change order of EK2/EK3 update
if EK3 is our primary estimator when we want to run the EK3 update
first, so it gets time priority for inter-EKF scheduling.
2017-05-01 14:24:55 +10:00
Andrew Tridgell 4c36c77db1 AP_BoardConfig: split setup of safety switch init init_safety()
this allows it to be called late, so that servo outputs are fully
setup before the safety is disabled when BRD_SAFETYENABLE=0
2017-04-30 21:47:04 +10:00
Randy Mackay b1bd3f0364 AC_WPNav: yaw points along leash 2017-04-29 11:47:51 +09:00
priseborough 8ead9d6b19 DataFlash: Add logging of average EKF time step min/max 2017-04-29 11:03:44 +10:00
priseborough 0bf50fd56f AP_NavEKF3: Add monitoring of average EKF time step 2017-04-29 11:03:44 +10:00
priseborough e48f46c98b AP_NavEKF2: Add monitoring of average EKF time step 2017-04-29 11:03:44 +10:00
priseborough 7d777485d8 AP_NavEKF: Add monitoring of average EKF time step 2017-04-29 11:03:44 +10:00
priseborough 3ce81967ae AP_NavEKF3: Improve calculation and use of average EKF time step 2017-04-29 11:03:44 +10:00
priseborough 7abf9997e6 AP_NavEKF3: Correctly initialise dtIMUavg time step and apply LPF 2017-04-29 11:03:44 +10:00
Andrew Tridgell 4ce0a8e24e GCS_MAVLink: time limit GCS update() calls
and add performance counters
2017-04-28 16:09:12 -07:00
priseborough 1301b9797a AP_NavEKF3: Fix solution validity reporting bug
Fixes bug that causes relative position status to report as false when using optical flow and using range finder as the primary height sensor.
2017-04-28 17:19:23 +01:00
priseborough 082f429da3 AP_NavEKF2: Fix solution validity reporting bug
Fixes bug that causes relative position status to report as false when using optical flow and using range finder as the primary height sensor.
2017-04-28 17:19:23 +01:00
Leonard Hall 62c123bb08 AC_WPNav: correct straight line waypoint leash calculation
The former calculation was not correctly using the 3D leash
2017-04-28 17:58:34 +09:00
Andrew Tridgell d4e6720b01 AP_BattMonitor: added BATT_VOLT_TIMEO
this is useful for aircraft with very low C batteries, to prevent a low
voltage failsafe on takeoff. For long endurance aircraft low C batteries
are often used, and the voltage sags a lot on takeoff, but it fine for
the rest of the flight
2017-04-28 17:40:18 +10:00
Andrew Tridgell 0ccb3a7688 DataFlash: added logging of timing statistics 2017-04-28 17:19:39 +10:00
Andrew Tridgell adb281cd4e AP_NavEKF3: added timing statistics logging 2017-04-28 17:19:39 +10:00
Andrew Tridgell ee5c032f27 AP_NavEKF2: added recording of timing statistics 2017-04-28 17:19:39 +10:00
Andrew Tridgell ae3df89d17 AP_NavEKF: added ekf_timing structure 2017-04-28 17:19:39 +10:00
Leonard Hall ba011eef78 AC_WPNav: init z-axis feed-foward to correct stopping point calcs 2017-04-28 09:10:02 +09:00
Randy Mackay 3a397584a1 AC_PosControl: z-axis stopping point up to 3m above vehicle
Stopping point while descending remains at 2m for safety
2017-04-28 09:10:02 +09:00
Leonard Hall 6e92f74ca0 AC_PosControl: add clear_desired_velocity_ff_z method 2017-04-28 09:10:02 +09:00
Michael du Breuil 22ab8de4d2 AP_BattMonitor: SMBus: Fetch pack capacity 2017-04-28 00:36:10 +01:00
Michael du Breuil f919c409bb AP_BattMonitor: Remove redundant state copy
Every backend stored a instance reference, which wasn't used in most locations
which is redundant given that the state already tracks the instance for us as
well.
2017-04-28 00:36:10 +01:00
Michael du Breuil 3ab3face9b AP_BattMonitor: SMBus: Read serial number 2017-04-28 00:36:10 +01:00
Francisco Ferreira 7dca7933fa AP_HAL_PX4: fix UAVCAN armed state to depend on safety switch 2017-04-27 14:04:56 +01:00
Francisco Ferreira 965eda69f3 AP_HAL_PX4: remove left-overs of legacy UAVCAN support 2017-04-27 13:32:43 +01:00
Andrew Tridgell ca4cde9770 HAL_PX4: fixed safety switch light pattern
this was broken by the recent CAN merge. My fault for not checking it
carefully. We have to publish the armed state so the fmu driver on
pixracer can update the light
2017-04-27 13:32:43 +01:00
priseborough 596b20eb07 AP_NavEKF2: close perf counter when doing early return 2017-04-27 20:14:21 +10:00
priseborough 88469ce80c AP_NavEKF2: Reset covariance if bad mag fusion update 2017-04-27 20:14:21 +10:00
priseborough f208986d43 AP_NavEKF3: Reset covariance if bad mag fusion update 2017-04-27 20:14:21 +10:00
Andrew Tridgell 18b66f9eed AP_NavEKF3: fixed reset of coviariance matrix 2017-04-27 18:33:25 +10:00
Andrew Tridgell d799bacd7d AP_NavEKF2: fixed reset of coviariance matrix 2017-04-27 18:33:25 +10:00
Randy Mackay e2cf836734 AC_WPNav: add get_stopping_point
returns 3D stopping point, simply re-uses pos_controller methods
2017-04-27 14:36:22 +09:00
Randy Mackay e96332d346 AC_WPNav: reduce spline to straight twitch 2017-04-27 11:21:33 +09:00
Pierre Kancir f8d6b5fc9c AP_HAL_SITL: Allow to use a second type of gps for all type 2017-04-26 18:34:56 +01:00
karthik.desai 44d84fca15 AP_Beacon: Added Marvelmind Beacon class
Code cleanup, adhering to Ardupilot code style
Marvelmind code fixes
formatting fixes including replacing camel case with underscore
replaced puts with ::printf
removed unused debug and counter

Removed useless library includes.
Corrected spellings.
Update the last_update_ms so healthy() doesn't break.
2017-04-26 11:59:20 +09:00
Pierre Kancir f0f7ca2386 SITL: State constrain rover motor input between 1000 and 2000 2017-04-26 10:38:01 +10:00
Andrew Tridgell 1e69508322 SITL: added a vectored tilt tricopter quadplane 2017-04-24 16:54:41 +10:00
Andrew Tridgell 61fbaf0db7 SRV_Channel: added elevon and vtail functions
these allow for trimming and limit setting per channel, plus allow for
more than one set of elevon or vtail
2017-04-24 16:26:08 +10:00
Michael du Breuil d91f89d24b AP_GPS: Remove stale ublox config files
These configurations no longer (and haven't for quite awhile) matched the
desired command set or baud rates, loading them will still require the GPS
driver to tweak settings, or have AUTO_CONFIG turned off, which is a less
safe configuration.
2017-04-23 21:15:58 +01:00
Peter Barker 1ba59b446c AP_GPS: log ublox sw and hw versions on dataflash log start
This burns 41 bytes of RAM for each u-Blox GPS.
2017-04-23 21:04:17 +01:00
Peter Barker b7baca8d43 AP_GPS: move GPS type announcements into backend
See #4584
2017-04-23 21:04:17 +01:00
Peter Barker c46ea73426 AP_GPS: rename QURTGPS to QURT 2017-04-23 21:04:15 +01:00
Peter Barker 2354a0ec5a AP_GPS: ability to log GPS detection state to dataflash 2017-04-23 21:03:23 +01:00
Peter Barker 94a5e94ec9 AP_GPS: canonicalise statustext messages
Use "GPS %d" prefix, where %d is instance+1, to correspond
with parameters
2017-04-23 09:09:30 +10:00
Peter Barker 4334a92ac9 AP_GPS: remove unimplemented method declarations 2017-04-23 09:08:30 +10:00
Peter Barker 608d6d0a5f DataFlash: implement a printf-like Log_Write_MessageF method 2017-04-23 09:08:30 +10:00
karthik.desai 28a6ca7d75 Dataflash: add AP_Beacon logging 2017-04-22 10:54:59 +09:00
Randy Mackay b255c7b370 AP_NavEKF: add setOrigin 2017-04-22 10:37:31 +09:00
Randy Mackay 0af9433c8e AP_AHRS: add set_origin 2017-04-22 10:37:31 +09:00
Jacob Walser 96f503d9d1 AP_Baro: Fix GND_EXT_BUS @Values formatting 2017-04-21 21:11:40 +01:00
Michael du Breuil e0d49e6d84 AP_BattMonitor: Use a unified SMBus temperature interface 2017-04-21 00:38:41 +01:00
Michael du Breuil 9c3b97347a AP_BattMonitor: Unify read_word interface 2017-04-21 00:38:41 +01:00
Michael du Breuil 3319c3ccdc AP_BattMonitor: Use a common PEC helper 2017-04-21 00:38:41 +01:00
Randy Mackay 35a965ebc5 AC_Avoidance: add configurable margin
vehicle will attempt to stop MARGIN meters from objects in GPS modes
2017-04-20 18:11:43 +09:00
Randy Mackay 3ad5c3775e AP_Proximity: rename get_distances to get_horizontal_distances
Also fix existing bug in return
2017-04-20 18:11:43 +09:00
Randy Mackay 09e3d6b7f0 AP_Proximity_MAV: healthy if either horiz or vert positions received 2017-04-20 18:11:43 +09:00
Pierre Kancir 327ac07d54 AP_HAL_SITL: gps correct glitchs 2017-04-19 17:44:29 +01:00
Florent Martel 949aa4d9ca AP_Frsky_Telem: replace VDOP with extra GPS status bits
This removes VDOP (not really that useful) and replaces two of those
bits with GPS status info that now allows to differentiate between 3D
fix, DGPS, RTK Float, and RTK Fixed. This is written to maximize
backwards compatibility (by not shifting any other bits of the
gps_status variable)
2017-04-19 17:43:17 +01:00
Eugene Shamaev fb8f4f8cd1 AP_UAVCAN: ESC numbering correction 2017-04-19 14:28:48 +01:00
Michael du Breuil a96772e46e AP_BattMonitor: get Solo battery voltage from sum of cell voltages
Minimizes the number of transactions on the bus, and reduces the amount of noise we have to consider
2017-04-19 14:17:24 +01:00
Michael du Breuil 3b6d348241 DataFlash: Log battery temperature and cell voltages 2017-04-19 14:17:24 +01:00
Michael du Breuil 341ac701d1 GCS_MAVLink: report temperature information to the battery status report 2017-04-19 14:17:24 +01:00
Michael du Breuil 9cb0d8f99b GCS_MAVlink: Add battery cell backend 2017-04-19 14:17:24 +01:00
Michael du Breuil 8f24d211ce AP_BattMonitor: Solo add support for temperature and cells
Also fixs a buffer overflow when reading the ManufacturerData
2017-04-19 14:17:24 +01:00
Michael du Breuil 043b93d643 AP_BattMonitor: Maxell support temperature 2017-04-19 14:17:24 +01:00
Michael du Breuil de02bd52ed AP_BattMonitor: SMBus_Maxell request voltages 2017-04-19 14:17:24 +01:00
Michael du Breuil 121ebebfef AP_BattMonitor: Add temperature interface 2017-04-19 14:17:24 +01:00
Michael du Breuil e39ae6d48c AP_BattMonitor: Add cell monitoring 2017-04-19 14:17:24 +01:00
Eugene Shamaev c9f413da38 GCS_MAVLink: AOA, SSA message 2017-04-19 20:48:42 +10:00
Eugene Shamaev a144e79a50 DataFlash: logging of AOA and SSA 2017-04-19 20:48:42 +10:00
Eugene Shamaev 5c080ce875 AP_AHRS: calculation and reporting of AOA and SSA 2017-04-19 20:48:42 +10:00
Lucas De Marchi 915f10dc8a AP_HAL: SPIDevice: prefer nullptr for pointer 2017-04-19 01:36:58 -07:00
Vinicius Juvinski c3d5aaa21c AP_Notify: add AP_BoardLED support for BBBMini 2017-04-19 01:33:50 -07:00
Vinicius Juvinski 203073e543 AP_HAL: add LEDs for BBBMini
Use pins P8.9, P8.10 and P8.11
2017-04-19 01:33:35 -07:00
Lucas De Marchi 875538ccb5 AP_HAL_Linux: examples: small fixes to BusTest
- Fix char allocation
  - Fix coding style
  - Fix accessing dev->bus_type(): it's a function
2017-04-19 01:13:40 -07:00
hiro2233 0d1d430600 AP_HAL_Linux:examples: Example to test device bus with the new APM API. 2017-04-19 01:05:12 -07:00
hiro2233 be06c1e8ed AP_HAL_Linux:SPIDevice: Add functions to get possible spi registered device 2017-04-19 01:05:12 -07:00
hiro2233 1a8fa6ac5a AP_HAL:SPIDevice: Added functions for spi registered device. 2017-04-19 01:05:12 -07:00
Lucas De Marchi 16c1bc1b0e AP_HAL_Linux: Util: fix coding style for pointers 2017-04-19 00:19:40 -07:00
Lucas De Marchi 9aa2a3938c AP_HAL_Linux: Util: make get_custom_log_directory const override final
While at it, add final and override to mark this as being the overriden
final implementation of this method.

Thanks to Phillip Khandeliants (@khandeliants) for reporting.
2017-04-19 00:19:22 -07:00
Peter Barker 18d8f9ba9d AP_HAL: make get_custom_log_directory const 2017-04-19 00:11:49 -07:00
Lucas De Marchi 008e631147 AP_HAL_Linux: Util: fix overriden function signature
While at it, add final and override to mark this as being the overriden
final implementation of this method.

Thanks to Phillip Khandeliants (@khandeliants) for reporting.
2017-04-18 23:57:54 -07:00
Lucas De Marchi 6f952fe3dd AP_HAL_Linux: fix checking wrong value for pthread function
Thanks to Phillip Khandeliants (@khandeliants) for reporting.
2017-04-18 23:57:54 -07:00
Peter Barker 9324d8e251 Dataflash: emit io thread warnings much less frequently 2017-04-19 12:33:18 +09:00
Randy Mackay 0644314499 DataFlash: add visual odometry sensor logging 2017-04-19 11:04:40 +09:00
priseborough d2c89443df DataFlash: add logging for EKF body frame odometry fusion 2017-04-19 11:04:40 +09:00
priseborough 90cd46f4d7 AP_AHRS: simulate body frame odometry sensor 2017-04-19 11:04:40 +09:00
priseborough 3b82f60b08 AP_AHRS: add interface for use of visual odometry data 2017-04-19 11:04:40 +09:00
priseborough fb7104f4e3 AP_NavEKF3: add fusion method for body frame odometry data 2017-04-19 11:04:40 +09:00
Randy Mackay 595d37ec70 AP_VisualOdom: class accepts deltas from visual odom camera 2017-04-19 11:04:40 +09:00