Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
8,905 Commits 71 Branches 509 Tags 747 MiB
Commit Graph

2393 Commits

Author SHA1 Message Date
Randy Mackay 58d1da2d80 Copter: integrate AC_Fence in place of limits 
Lesser functionality than limits but saves more than 150 bytes and it
works
 2013-04-27 11:14:07 +09:00
Randy Mackay 45aab0de92 Copter: add I2C error count to PM message 2013-04-26 22:39:22 +09:00
Andrew Tridgell 300a8d2bbc Copter: support all 12 channels on PX4 
last 4 channels are on the FMU pins
 2013-04-25 20:10:53 +10:00
Randy Mackay 74dca6da22 Copter: move update_commands to run_autopilot fn 
update_commands was being run in the medium_loop counter but it is
easier to understand the flow of the code if it is consolidated along
with other autopilot calls.
 2013-04-24 20:59:49 +09:00
Andrew Tridgell fb0f5d46ba Copter: use BIT_IF_SET() 
this should fix the problem with simple mode on PX4

Pair-Programmed-With: Randy Mackay <rmackay9@yahoo.com>
 2013-04-23 23:05:42 +10:00
Andrew Tridgell 5ad9deecfb Copter: cleanup some bit if tests to be clearer 
Pair-Programmed-With: Randy Mackay <rmackay9@yahoo.com>
 2013-04-23 23:03:34 +10:00
Andrew Tridgell 8ec1eaa8b1 build: removed obsolete cmake rules 
these have not been maintained for over a year
 2013-04-23 11:07:53 +10:00
Randy Mackay 63a48f76e2 Copter: add pre-arm check of radio and accel 
Only checks throttle channel and accelerometer scaling
 2013-04-23 00:01:20 +09:00
Randy Mackay 07b6efafd8 Copter: use DEGX100 constant for position_vector calcs 2013-04-22 21:03:46 +09:00
Randy Mackay 0b29754920 Copter: simplify roll-pitch stabilize controller 
remove check of whether to freeze i term when attitude is less than 5
degrees from horizontal.  I terms have been moved to the rate
controllers.
 2013-04-22 18:47:56 +09:00
Andrew Tridgell 82c604dd67 Copter: more constrain fixes 2013-04-22 13:26:49 +10:00
Andrew Tridgell d5875676b1 Copter: use a reference to DCM matrix 2013-04-22 13:26:49 +10:00
Andrew Tridgell c2c037ec0d Copter: use the right constrain() type in Attitude code 
Pair-Programmed-With: Randy Mackay <rmackay9@yahoo.com>
 2013-04-22 13:26:49 +10:00
Randy Mackay a9da3c9d3d Copter: remove unused throttle functions 
removed get_pilot_desired_acceleration vand get_pilot_desired_direct_alt
were used for initial testing of the inertial alt-hold controller but
are no longer required.
 2013-04-21 23:43:04 +09:00
Andrew Tridgell 9cec664236 Copter: fixed format of PM message log 2013-04-21 23:46:35 +10:00
Randy Mackay 94d4ecef11 Copter: reduce throttle rate D to zero 2013-04-21 16:28:07 +09:00
Randy Mackay 2fc25da4c3 Copter: Leonard's fix for get_loiter_accel_to_lean_angle 2013-04-21 16:27:50 +09:00
Andrew Tridgell c53ede506d Copter: make if statement clearer 2013-04-21 07:25:52 +10:00
Bill Bonney 36041bb9ff Copter: Enable CURRENT logging by default to dataflash 2013-04-21 07:25:34 +10:00
Andrew Tridgell 8b31f276a2 Copter: switch to block based logs for SITL 2013-04-20 20:45:51 +10:00
Randy Mackay 745df9b13c Copter: add SONAR_GAIN to tune reaction to sonar 
Some users report the response to sonar is too violent, this allows that
reaction to be reduced
 2013-04-20 15:58:36 +09:00
Randy Mackay 50515e28e1 Copter: replace fabs with fabsf 2013-04-20 15:40:56 +09:00
Randy Mackay a53e5f747b Copter: add fourth yaw behaviour, look-at-home 
Added get_wp_yaw_mode to remove duplication of checks of the
WP_YAW_BEHAVIOR parameter
 2013-04-20 15:36:24 +09:00
Andrew Tridgell 02c3083f60 Copter: print flight mode as string 2013-04-20 15:18:22 +10:00
Andrew Tridgell ce3ee97e73 Copter: removed duplicate print_latlon() declarations 2013-04-20 13:57:45 +10:00
Andrew Tridgell 93d075404c Copter: added board voltage to current message 2013-04-20 13:52:37 +10:00
Andrew Tridgell a0708460a4 Copter: convert to new logging system 2013-04-20 13:52:37 +10:00
Andrew Tridgell 67484a2ea1 Copter: make copter code compatible with the new logging system 
not fully converted yet
 2013-04-20 13:52:36 +10:00
Randy Mackay 37abfdc65a Copter: make CIRCLE_RATE a tunable parameter 
Also bug fix to check of how many time it has rotated during a loiter
turns mission command
 2013-04-20 12:03:55 +09:00
Randy Mackay d65d7d95e2 Copter: bug fix for take-off so it never descends 
If copter was already flying when take-off command was received it could
descend to the target altitude if it was below the current altitude.
 2013-04-18 22:30:24 +09:00
Randy Mackay 0fc9c8739e Copter: add WP_YAW_BEHAVE parameter 
Allows user to control whether nose points towards next waypoint and/or
home when RTLing.
Replaces YAW_OVR_BEHAVE which had a very similar purpose.  Almost nobody
ever knew about or used this parameter.
 2013-04-18 15:30:18 +09:00
Randy Mackay 18c1373847 Copter: remove unused AUTO_VELZ defaults 
These have now moved to AC_WPNav
 2013-04-18 14:57:08 +09:00
Randy Mackay f5955d8915 Copter: auto climb and descent params removed 
These params now reside in the AC_WPNav library
 2013-04-18 14:52:21 +09:00
Randy Mackay 9b351feade Copter: shorted INAV dataflash log message length 
Velocities are now output in WPNav message
 2013-04-17 22:39:30 +09:00
Randy Mackay f7524e5741 Copter: remove unnecessary cast to float in Log 2013-04-17 22:35:02 +09:00
Randy Mackay 7c8527e6a6 Copter: resolve compiler warning 2013-04-17 22:14:47 +09:00
Randy Mackay 2b4a7d60a9 Copter: remove unused throttle modes 
These were useful for testing the alt-hold when it was first introduced
but now they just add complexity
 2013-04-17 22:14:22 +09:00
Randy Mackay 56809a9df2 Copter: remove unused nav_ok and alt_sensor_flag 2013-04-17 21:57:57 +09:00
Randy Mackay 0b808abbed Copter: remove unused waypoint_valid function 2013-04-17 21:28:43 +09:00
Randy Mackay d2bd818b2d Copter: bug fix for auto_armed logic 
Zero throttle when switching into an auto flight mode would cause the
motors to stop.
 2013-04-17 21:28:42 +09:00
Andrew Tridgell 501eb4f0b4 Copter: made more variables static 2013-04-17 21:35:11 +10:00
Andrew Tridgell 61c2befd4d Copter: fixed logging for new API 2013-04-17 21:34:42 +10:00
Randy Mackay 82989d85f2 Copter: remove unused #defines 2013-04-16 22:34:12 +09:00
Randy Mackay 0663da7c9e Copter: loiter rate IMAX to 4m/s/s and D to zero 2013-04-16 22:28:18 +09:00
Randy Mackay b8974dec99 Copter: compass learn off by default 2013-04-16 18:47:39 +09:00
Randy Mackay a7b32caf72 Copter: bug fix for loiter_time check 
loiter_time_max was changed to hold the loiter time in seconds
(previously it was milliseconds) in order to allow the delay to be more
than 65 seconds but the verify_loiter_time check was missed from that
change
 2013-04-15 23:57:22 +09:00
Randy Mackay a185fa950c Copter: Jason's fix to auto disarming 
Added check so that it only starts counting down when motors are armed.
This removes the issue in which the copter sometimes disarms shortly
aftering being armed.
 2013-04-15 23:36:45 +09:00
Randy Mackay 8fe3e689f4 Copter: add WPNAV log message 2013-04-15 21:54:29 +09:00
Randy Mackay b48864e1ad Copter: allow CH6 tuning of compass declination 2013-04-15 21:50:44 +09:00
Andrew Tridgell cf6ae4a746 Copter: remove ahrs.set_barometer() 2013-04-15 10:52:32 +10:00
Randy Mackay 8c7a1597dc Copter: remove debug comment from RTL 2013-04-14 18:28:13 +09:00
Randy Mackay 629d23b7e2 Copter: remove WP_SPEED and WP_RADIUS parameters 
AC_WPNav library has equivalent params with very similar names
 2013-04-14 13:27:37 +09:00
Randy Mackay b58c26bcd5 Copter: remove pid_nav_lat, pid_nav_lon 2013-04-14 12:12:51 +09:00
Randy Mackay bffe4fa412 Copter: remove NAV_LAT and NAV_LON 
Loiter and navigation controllers now combined
 2013-04-14 12:09:45 +09:00
Randy Mackay 700fb1b179 Copter: replace sin_yaw_y, cos_yaw_x in circle mode 2013-04-14 10:39:30 +09:00
Randy Mackay 366616e32c Copter: reduce default loiter PIDs 2013-04-14 10:39:28 +09:00
Randy Mackay 1ee825ee9a Copter: move alt and wp checking to AC_WPNAV 
RTL fix so that if it starts rtl-ing from above 80m it returns home
while descending instead of descending at initial position.
add get and set_target_alt_for_reporting
 2013-04-14 10:39:23 +09:00
Randy Mackay 2db8365c90 Copter: add AC_WPNav to parameters list 2013-04-14 10:39:02 +09:00
Randy Mackay bc87118062 AC_WPNav: add get_target_alt method 2013-04-14 10:39:00 +09:00
Randy Mackay 6dbcbdcb43 AC_WPNav: limit max loiter position error 
move interpretation of pilot input to wpnav lib
 2013-04-14 10:38:58 +09:00
Randy Mackay 7c559333f5 Copter: get_throttle_rate's target_speed a float 2013-04-14 10:38:51 +09:00
Randy Mackay 926c404994 AC_WPNav: Leonard's loiter target smoothing 2013-04-14 10:38:39 +09:00
Randy Mackay ee7f40cfe9 Copter: Leonard's alt-hold feed forward 2013-04-14 10:38:37 +09:00
Randy Mackay f82ce449d7 AC_WPNav: add angle limits and set from AC's throttle controller 2013-04-14 10:38:34 +09:00
Randy Mackay 553f40a99c Copter: bug fix to loiter delay 
change delay to seconds to allow delays longer than 65seconds
 2013-04-14 10:38:30 +09:00
Randy Mackay a65960a009 Copter: use velocity based set_loiter_target 2013-04-14 10:38:28 +09:00
Randy Mackay e592baae11 Copter: remove remnants of fast_corner 2013-04-14 10:38:20 +09:00
Randy Mackay 4de5f67a91 Copter: replace wp_nav.get_target_alt with get_destination_alt 2013-04-14 10:38:17 +09:00
Randy Mackay 5b93990e41 Copter: removed next_WP 
Use the wp_nav.get_target_alt or controller_desired_alt in it's place
 2013-04-14 10:38:07 +09:00
Randy Mackay 1516972eaa Copter: add panorama to CIRCLE mode 
Yaw will slowly rotate if CIRCLE_RADIUS is set to zero
Circle center is projected forward CIRCLE_RADIUS from current position
and heading
 2013-04-14 10:38:01 +09:00
Randy Mackay 58ed8cd544 Copter: replace set_next_WP with direct call to wp_nav 2013-04-14 10:37:55 +09:00
Randy Mackay 49828eba7d Copter: integrate AC_WPNav 2013-04-14 10:37:48 +09:00
Randy Mackay cdb532a594 Copter: bug fix for loiter target 2013-04-11 18:24:20 +09:00
Randy Mackay e637a8fb29 Copter: remove old commented out code from setup.pde 2013-04-11 10:12:21 +09:00
tobias 217b8d7a59 cleanup: use const for struct Location pointers and references 
this allows the compiler to generate more efficient code
 2013-04-09 12:10:32 +10:00
Randy Mackay 9036b97a16 Copter: fix build error 
Removed last print_test_disabled call
 2013-04-05 23:03:17 +09:00
Randy Mackay fc0c451b69 Copter: remove #ifdef checks for Atmega1280 2013-04-05 22:48:10 +09:00
Randy Mackay 1dcd46bffc Copter: reduce compiler warnings 2013-04-05 22:25:58 +09:00
Randy Mackay 95d944f610 Copter: Jason's bug fix for loiter's set_next_WP_latlon 2013-04-05 13:46:07 +09:00
Randy Mackay 777c6a308e AP_InertialNav: use shared GRAVITY_MSS constant 2013-04-05 11:48:41 +09:00
Randy Mackay d1afd2fb9b Copter: make guided mode start at current location 2013-04-03 23:06:46 +09:00
Randy Mackay 0be23c8090 Copter: fix THR_ALT_P documentation 2013-04-03 22:38:34 +09:00
Randy Mackay 3bf847f675 Copter: Jason's faster cos_yaw, sin_yaw 2013-04-02 15:50:29 +09:00
Randy Mackay 40f6416b3d Copter: update Log_Read_Compass comment 2013-04-02 11:02:14 +09:00
Randy Mackay 7cf2255822 Copter LEDs: replace bitRead with bitmask 
Consolidate all checks of led_mode to leds.pde
Add #defines for bitmasks comparisons
Some formatting changes
 2013-04-01 13:10:12 +09:00
Randy Mackay a9eb626cb8 Copter: update default Rate Yaw P to 0.20 (was 0.25) 2013-04-01 11:49:50 +09:00
Randy Mackay 7ccb14344c Copter: update version to 2.9.1b-dev 2013-04-01 11:47:56 +09:00
Randy Mackay 7d4eea271f Copter: update Release notes again for 2.9.1b release 
Missed item re increasing max inav accel correction to 3 m/s
 2013-04-01 11:46:42 +09:00
Randy Mackay 49e3e040b6 Copter: update Release notes ahead of 2.9.1b release 2013-04-01 11:46:37 +09:00
Randy Mackay 24dd167607 Copter: ACRO bug fix from Jason 2013-04-01 11:44:28 +09:00
Michael Oborne 541fa13291 cleanup comments 2013-03-31 17:14:54 +08:00
Michael Oborne e80f2c094e HIL fix location, alt, mag from hil state message 2013-03-31 16:42:16 +08:00
Michael Oborne 59f80410d5 Add ability to compile sensor hil with sitl 2013-03-31 16:35:23 +08:00
Andrew Tridgell b280857025 Copter: use common angle wrap code 2013-03-29 13:14:31 +11:00
Randy Mackay f7d977fe37 Copter: add support for GPS fix type 2D 2013-03-27 11:41:47 +09:00
Andrew Tridgell b955aed976 Copter: fixed GPS test (detection of uBlox needs 10Hz poll) 2013-03-21 22:45:07 +11:00
Andrew Tridgell d22a7c64c9 Copter: only enter CLI is link is idle when 3 enters are hit 
this will prevent binary contents of RADIO packets being interpreted
as CLI enter line-feeds
 2013-03-21 21:56:02 +11:00
Andrew Tridgell ce8313e8fb Copter: only allow CLI within 20s of startup and when motors not armed 2013-03-21 17:34:11 +11:00
Randy Mackay 80bd593814 Copter: disarm motors when entering CLI 2013-03-21 12:07:00 +09:00
Randy Mackay dcf21eee8f Copter: only allow entering the CLI within 30 seconds of start-up 2013-03-21 11:54:04 +09:00
Andrew Tridgell ae96c77add Copter: added shell command in CLI test menu 2013-03-20 12:35:50 +11:00
Randy Mackay 38e81adae0 InertialNav: remove unnecessary "virtual" from function definitions 
This saves about 30bytes of RAM
 2013-03-19 17:51:16 +09:00
Randy Mackay a17421da27 Copter: scale HIL accels consistently with Plane code 2013-03-19 15:07:15 +09:00
Randy Mackay b4b9d80c2f Copter: bug fix to accept HIL accel values correctly 2013-03-19 11:33:58 +09:00
John Stäck 46a831fc03 Copter: add parameter "set" and "show" commands to setup menu. 
Squashed commit of the following:

commit 4243a0bb89de2f850606c623aac6a5b583c333ae
Author: John Stack <stack@spotify.com>
Date:   Thu Mar 7 09:28:16 2013 +0100

    Undo change to system.pde, not needed.

commit dae2dbbbd6e13621fccc1d0a221aae8d83240417
Author: John Stack <stack@spotify.com>
Date:   Wed Mar 6 22:47:50 2013 +0100

    Remove leftover bits of old menu setup

commit ccefc8fe0d237364b06a1478348f8552720d7598
Author: John Stack <stack@spotify.com>
Date:   Wed Mar 6 22:40:30 2013 +0100

    Roll the param menu into setup.

commit c61dad17bf32a3080d8eca2389c6e25f98767545
Author: John Stack <stack@spotify.com>
Date:   Wed Mar 6 08:08:42 2013 +0100

    Make the param menu a compile-time option, by defining PARAM_MENU

commit 0f35c4e88ec7aba5035b4880e9994e4783da75a9
Author: John Stack <stack@spotify.com>
Date:   Wed Mar 6 07:57:22 2013 +0100

    Use find(), which works well.

commit 3b81b29597fcee49193330d7b6d3f3aed99a476c
Author: John Stack <stack@spotify.com>
Date:   Tue Mar 5 07:57:33 2013 +0100

    Whitespace fixes

commit 6b9ccc5fe1de1e40a24eb9ff89006b9bd80e3662
Author: John Stack <stack@spotify.com>
Date:   Tue Mar 5 07:28:20 2013 +0100

    Add cli menu to change any parameter.
 2013-03-18 15:49:41 +09:00
Andrew Tridgell 952c56e990 Copter: fixed barometer init in HIL sensors mode 2013-03-18 16:20:25 +11:00
Andrew Tridgell ac06b5e62d Copter: remove unused function 2013-03-18 16:20:25 +11:00
Randy Mackay 36834e77b5 Copter: remove support for CLI Slider 2013-03-18 14:07:04 +09:00
Randy Mackay 597a4b912a Copter: fix to allow building HIL_MODE_SENSORS 2013-03-18 13:41:52 +09:00
Randy Mackay d1344e8c39 Copter: remove #define for CROSSTRACK_GAIN 
Note: the cross track is still calculated inside the inertial nav based
loiter and wp controls but it's no longer requires a tunable parameter
 2013-03-17 16:56:18 +09:00
Randy Mackay 1b6fcad90a Copter: remove tilt compensation parameter 
Note: this idea of feed forward tilt compensation is being incorporated
into the inertial nav based loiter and wp controllers but does not
require a separate tunable parameter
 2013-03-17 16:53:32 +09:00
Randy Mackay 61e29173e3 Copter: remove unused crosstrack variables and parameters 
Cross track is still calculated internally to the wpnav controller so we
should move this to a library and still report it to the ground station
 2013-03-17 16:46:31 +09:00
Randy Mackay a1295c042b Copter: fix init of wp_verify_byte so wp alt is always required 2013-03-17 16:37:30 +09:00
Randy Mackay fdcb78ccf7 Copter: leonard's smoother alt-hold transition 
Target altitude when entering alt-hold is based on a projection from
current alt and climb rate
 2013-03-17 13:24:49 +09:00
Randy Mackay 37040adfaa Copter: bug fix for auto missions over 320m 
get_throttle_althold_with_slew's target_alt parameter defined as int16_t
(instead of int32_t) meaning missions with altitudes >320m could wrap
around and become negative.
 2013-03-17 11:14:35 +09:00
Randy Mackay 150046f2b8 Copter: GPS Failsafe implemented 
Switches to LAND mode 5 seconds after losing GPS if you're in a flight
mode that requires a GPS
 2013-03-16 17:27:46 +09:00
Randy Mackay f9539384a1 Copter: rename failsafe to failsafe_radio 
Makes way for separation of failsafes for throttle, gps and gcs
 2013-03-16 17:14:21 +09:00
Randy Mackay f263e81ed7 Copter: remove unused GPS and baro filters 
Saves 24bytes of RAM
Removing the baro filter leads to noisier Baro Alt appearing in the log
so we should make the inertial nav altitude appear in the CTUN message
 2013-03-16 00:20:15 +09:00
Randy Mackay 5380973225 Copter: only start delay timer after reaching wp location and altitude 2013-03-06 12:50:41 +09:00
Randy Mackay a73f50494c TradHeli: remove duplicate RC_FAST_SPEED definition 2013-03-04 23:45:23 +09:00
Randy Mackay cb6ffc7acf Copter: minor formatting fix for report_ins 2013-03-04 23:14:14 +09:00
Randy Mackay 998511f506 Copter: use unsigned long for dataflash log for gps time 
Updated some formatting of comments in the same file
 2013-03-04 23:13:06 +09:00
Randy Mackay 33bd984a91 Copter: remove unused input_voltage parameter 2013-03-03 23:23:54 +09:00
Randy Mackay cb84ec9d9b Copter: add current based compass compensation 2013-03-03 23:02:36 +09:00
Andrew Tridgell c2fd1512ff Copter: use voltage_average() so as to avoid INPUT_VOLTS 2013-03-03 16:16:01 +11:00
Randy Mackay 0d5e731a65 Copter: add compassmot to cli 
Allows user to setup compensation for motor's interference on the
compass
 2013-03-02 17:54:18 +09:00
Randy Mackay 476a6d0164 Copter: fix for acro throttle bug 2013-03-02 10:28:44 +09:00
Randy Mackay 6b2b69535f Copter: Compass log stores/retrieves motor offsets 2013-03-02 00:03:20 +09:00
Randy Mackay d8515ff85e Compass: basic compensation for motor interference 2013-03-02 00:03:16 +09:00
Andrew Tridgell 637ecd5279 Copter: updates for new dataflash API 2013-03-01 07:18:26 +11:00
Andrew Tridgell 9a3bd17cfb Copter: fixes for new DataFlash API 2013-03-01 07:18:25 +11:00
Randy Mackay e0506bd622 Copter: inav circle initial implementation 2013-02-26 11:35:35 +09:00
Randy Mackay c8f09ac219 Copter: fix compile error for PX4 re Compass logging 2013-02-25 13:26:58 +09:00
Randy Mackay d6ff5ae261 Copter: add roll-pitch slew for auto modes 
Added reporting of roll, pitch inputs for ACRO, AUTO
 2013-02-24 14:42:04 +09:00
Randy Mackay e297ba7d18 Copter: update default loiter gains for inertial nav 2013-02-24 14:42:00 +09:00
Randy Mackay 102b5da59d Copter: remove unnecessary #defines from APM_Config.h 2013-02-24 14:41:56 +09:00
Randy Mackay cbde042ec5 Copter: remove non-inav loiter and wp controllers 
lon_speed, lat_speed changed to float
do_takeoff, do_land now set roll-pitch, yaw and nav modes specifically
removed fast_corners functionality (may need to be reimplemented with
new inertial nav controllers)
 2013-02-24 14:41:52 +09:00
Randy Mackay 609676e26c Copter: add logging of compass values 
Removed rarely used ITERM because we didn't have enough bits in the log
mask
 2013-02-24 14:41:48 +09:00
Randy Mackay 6f27bc7ae5 Copter: remove filters from inav loiter 2013-02-24 14:41:44 +09:00
Randy Mackay 1410063a14 Copter: new ROLL_PITCH_WP_INAV roll-pitch mode 
small corrections to allow waypoints to work with new inertial nav wp
controller
 2013-02-24 14:41:40 +09:00
Randy Mackay 574756908d Copter: set wpinav controller targets in nav calls 
All navigation commands now properly set wpinav controller targets
except CIRCLE related commands.
 2013-02-24 14:41:36 +09:00
Randy Mackay 00bc28adcc Copter: take-off code cleanup 
remove redundant setting of loiter target.
explicitely set throttle mode to THROTTLE_AUTO
 2013-02-24 14:41:32 +09:00
Randy Mackay 67c69a19ee Copter: remove baro-only alt hold 
Saves 8 bytes of memory and more importantly simplifies the alt hold
calculations
 2013-02-24 14:41:29 +09:00
Randy Mackay 37d3e1d7e4 Copter: add zero slope checks to wpinav 
also added RTL fix to set wpinav target explicitly
 2013-02-24 14:41:25 +09:00
Randy Mackay b74da54c98 Copter: enable inav xy by default 2013-02-24 14:41:21 +09:00
Randy Mackay 53ab1d5d9b Copter: add advance track call to actually move towards waypoint 
Also added unrelated check that waypoint is valid before updating
waypoint distance.
 2013-02-24 14:41:17 +09:00
Randy Mackay 766ccdf6f8 Copter: add selection of inertial nav wp controller to APM_Config.h 2013-02-24 14:41:13 +09:00
Randy Mackay fcf102b2cf Copter: inertial nav waypoint controller 
#define added to allow compile time selection of traditional or inav
based loiter and wp controllers
 2013-02-24 14:41:09 +09:00
Jason Short 4c3ee76900 AC: Moving flip speed back to 400°/s to prevent oscillation around change in speed. 
Would like to add a more gradual speed change in the finish. Might require a new state as the copter passes -90°
 2013-02-23 13:14:15 +09:00
Jason Short 7d5b975da2 AC: Flip code fix 
Flight tested it today and made some flips. Throttle adjusted in Manual throttle modes. Not tested in AP throttle modes such as alt hold.
 2013-02-23 13:14:11 +09:00
Randy Mackay 8e4c9518ea Copter: increase low voltage check to 10.5v 
Change requested by Rob Lefebvre and Richie Wilson
 2013-02-23 00:36:51 +09:00
Jason Short abd0fb9099 AC : global static variables should not be initialized to zero 2013-02-22 17:34:18 +09:00
Andrew Tridgell 4c7a1a1806 Copter: change PX4 main baud rate back to 115200 
we now use USB console
 2013-02-22 07:04:23 +11:00
Randy Mackay 2ecf34e509 Copter: update version to 2.9.1 ahead of release 2013-02-19 13:52:04 +09:00
Randy Mackay d48aebea8e Copter: updated release notes for 2.9.1-rc2 2013-02-19 13:49:53 +09:00
Randy Mackay 9904e9f4db Copter: update firmware version to 2.9.1-rc1 2013-02-19 13:43:36 +09:00
Randy Mackay 6601bd37cf Copter: integrate automatic roll and pitch trims 2013-02-19 12:51:24 +09:00
Michael Oborne 61e5b09f28 Send FS state to gcs for AC 2013-02-09 10:11:36 +08:00
Andrew Tridgell 19a282dad0 Copter: removed use of ins.temperature() 2013-02-07 15:05:47 +11:00
Pat Hickey d418197898 ArduCopter: fixed memory unsafe member access in GCS_MAVLINK 
* Smokey, this is not 'Nam. this is bowling. there are rules
 2013-02-02 22:43:56 -08:00
Randy Mackay 9d34ead486 Copter: fix up some casting issues for wp_distance 2013-02-01 22:42:50 +09:00
Randy Mackay df1c0d92bd Copter: manual throttle scaling fix 
Scaling of bottom half of throttle was changed from THR_MIN ~ 500.
Previously it was from 0 ~ 500.
 2013-02-01 22:37:33 +09:00
Randy Mackay a0b65a262b Copter: use scaled throttle for accel-throttle's I term 
Accel throttle's I term is taken from scaled manual throttle
 2013-02-01 22:37:25 +09:00
Randy Mackay 06a71af12f Copter: THR_MID used to scale manual throttle 2013-02-01 22:37:16 +09:00
Randy Mackay 4813526725 Copter: bug fix for autotrim's roll axis backwards 2013-01-31 17:42:29 +09:00
rmackay9 9c3b9907dd Copter: bug fix to set sonar_alt_health to zero when disabled 2013-01-31 17:00:28 +09:00
Randy Mackay 70371be4a1 Copter: use AP_Math's longitude_scale 
bug fix to base scaling on home location instead of next_WP which may
not have been initialised
 2013-01-27 23:35:12 +09:00
Randy Mackay 6f5050a8b9 Copter: minor casting fixup for wp_distance 2013-01-27 11:27:43 +09:00
Randy Mackay ce370bab0c Copter: rename CUR and CURR to CURRENT for logging 
Based on user complaint that enable/disable was using CUR while message
was appearing as CURR
 2013-01-26 17:20:41 +09:00
Randy Mackay fb1358a629 Copter: make all message output csv 2013-01-26 17:05:38 +09:00
Randy Mackay d2767b911c AP_Math: switch get_distance_cm to return uint32_t 
Includes changes required on ArduCopter and ArduPlane side as well
 2013-01-26 17:04:12 +09:00
Randy Mackay 0056bfadd7 Copter: rename ROLL_PITCH_LOITER 
new name ROLL_PITCH_LOITER_INAV makes it more clear that it should only
be used with the new inertial nav loiter controllers
 2013-01-25 23:27:31 +09:00
Randy Mackay b74fe10aa9 Copter: set each flight mode's nav_mode 
Allow ACRO flight mode's roll, pitch, yaw, throttle and nav mode to be
overwritten
 2013-01-25 15:57:55 +09:00
Randy Mackay aaecc25ac7 Copter: leonard's inav2 
Moved loiter controller to navigation.pde
 2013-01-25 15:16:35 +09:00
Randy Mackay fd02cfe706 Copter: added set_nav_mode to control initialisation of nav controllers 
Renamed run_navigation_controllers() to run_autopilot()
Renamed update_nav_wp() to update_nav_mode()
Renamed wp_control to nav_mode to be more consistent with roll-pitch,
yaw and throttle controllers
 2013-01-25 15:16:29 +09:00
Randy Mackay 8af605cafc Copter: set update rate to 50hz during esc calibration 
Also modified some comments in the code re the esc calibration
 2013-01-25 11:34:48 +09:00
Randy Mackay deafbf1f56 Copter: inav loiter comment changes 
removed unused get_loiter_vel function
 2013-01-24 11:14:38 +09:00
Randy Mackay 68fc9ac1d8 Copter: add "f" to end of float constants 
This is a small performance improvement for the px4
 2013-01-23 14:51:37 +09:00
Randy Mackay 911e090e07 Copter: typo fixed for trad heli config 2013-01-23 12:35:10 +09:00
Randy Mackay 9a09f086d2 Copter: Leonard Hall's inertial nav ver 2 2013-01-23 12:34:49 +09:00
Andrew Tridgell 47cc247046 Copter: limit number of bytes read per GCS check 2013-01-23 09:34:54 +11:00
rmackay9 ab1978ad50 Copter: Leonard Hall's inertial nav based loiter 2013-01-22 18:38:00 +09:00
Jonathan Challinger 6565d83e73 InertialNav: Fixed signs, remove body-frame rotation, apply correction at 100hz. 2013-01-22 18:37:45 +09:00
Andrew Tridgell f303554259 Copter: run serial0 at 57600 on PX4 2013-01-22 09:50:22 +11:00
Andrew Tridgell ae5f46abc9 Copter: fixed mavlink fetch of 16 character parameter 2013-01-21 16:52:01 +11:00
Robert Lefebvre dde713aaa5 Arducopter: Backing out my changes for a new Loiter Repositioning mode. Leonard and Jonathan's work will trump this. 2013-01-20 21:32:00 +09:00
Andrew Tridgell a341d59ed0 Copter: fixed test code warnings 2013-01-20 22:13:20 +11:00
Michael Oborne 74e3d64e62 AC Fix BATT_CURR_PIN number 2013-01-20 06:33:29 +08:00
Andrew Tridgell 580abf1106 Copter: fixed PX4 mag orientation 2013-01-17 17:23:34 +11:00
Randy Mackay 577bf865b3 Copter: update firmware version to 2.9-dev 
The -dev extension indicates that we are post 2.9 release
 2013-01-17 13:03:33 +09:00
James Bielman 5631f865b2 Update floating point calculations to use floats instead of doubles. 
- Allows use of hardware floating point on the Cortex-M4.
- Added "f" suffix to floating point literals.
- Call floating point versions of stdlib math functions.
 2013-01-16 13:52:01 +11:00
Randy Mackay ccaa7a52ef Copter: RTL bug fix to initial step is always a climb and not a descent 
Also bug fix to hold yaw on take-off
 2013-01-15 12:17:52 +09:00
Randy Mackay 2dab40abeb Copter: bug fix to altitude check of verify takeoff 
set_next_WP function was not setting the alt_change_flag properly
 2013-01-15 12:17:45 +09:00
Randy Mackay 148c227d73 Copter: update firmware version to rc5 2013-01-15 12:17:41 +09:00
Randy Mackay 04677bfb95 Copter: constrain auto roll and pitch to 45 degrees 2013-01-15 12:17:32 +09:00
Andrew Tridgell 56f22f9226 Copter: use common log reading function 2013-01-15 14:03:51 +11:00
jschall d6b3d370c3 Correct spelling of run_navigation_contollers 2013-01-14 16:45:15 -08:00
Randy Mackay 5418827f22 Copter: update parameter descriptions for FRAME and CH7_OPT 2013-01-14 15:49:26 +09:00
Randy Mackay 98f5e27dc3 Copter: small correction to RTL_ALT_FINAL param description 2013-01-14 15:21:19 +09:00
Randy Mackay 8bbc93bb04 Copter: added CH7 switch to enabling/disable the sonar in flight 
This indirectly switches surface tracking on/off which is useful to
avoid tracking the tops of uneven objects when far above the ground
 2013-01-14 14:00:08 +09:00
Randy Mackay df2137ed72 Copter: constrain loiter so that it never commands more than 45 degrees of lean in lat or lon directions 2013-01-14 13:34:19 +09:00
Randy Mackay fef7569dee Copter: added experimental LOITER_REPOSITIONING #define to config.h 
APM_Config.h should be used to overriding the standard parameters but
they still require a definition in config.h or they will be undefined
when built by the mission planner.
 2013-01-14 13:34:14 +09:00
Randy Mackay 76f032160c Copter: relax altitude check in verify_takeoff 
Previously we checked if the alt > target_alt but because there is
little to no overshoot with the new accel based alt controller this
check was failing for some users.
 2013-01-14 13:34:06 +09:00
Randy Mackay 8ac95d6034 ArduCopter: updated release notes for 2.9-rc4 2013-01-13 20:01:13 +11:00
Randy Mackay c1fa850d10 ArduCopter: update firmware version to 2.9-rc4 2013-01-13 20:01:09 +11:00
Randy Mackay c447b4b79b ArduCopter: move setting of land's yaw mode to the do_land function 2013-01-13 20:01:06 +11:00
Randy Mackay 08dc730d40 ArduCopter: bug fix to LAND flight mode not actually landing if initiated from failsafe 
An hidden bit of failsafe functionality in the set_mode function was
switching the throttle mode back to THROTTLE_AUTO instead of
THROTTLE_LAND
 2013-01-13 20:01:03 +11:00
Randy Mackay 175f69a64f ArduCopter: smooth throttle when switching from manual throttle to alt hold 
new set_accel_throttle_I_from_pilot_throttle function copies the
difference between the pilot's throttle and hover throttle to the
accelerometer based throttle controller's I term.
 2013-01-13 20:00:59 +11:00
Randy Mackay 9ad6f711f8 ArduCopter: replace FS_THR_RTL_MIN_DISTANCE with wp_radius 
This effectively means that an RTL kicked off by a failsafe will
immediately switch to LAND mode only if within 2 meters.  Previously the
radius was much wider (15m).
 2013-01-13 20:00:47 +11:00
Randy Mackay 19abdc3cd3 ArduCopter: update release notes for rc3 2013-01-13 20:00:43 +11:00
Randy Mackay 12f885c33c ArduCopter: disable ITERM logging by default 
This message takes 1ms to write and we are running over our limits on
some loops.
 2013-01-13 20:00:39 +11:00
Randy Mackay fbed8b8861 ArduCopter: alphabetized the contributors list 
Jonathan Challinger added
 2013-01-13 20:00:28 +11:00
Randy Mackay 5965914039 ArduCopter: increase firmware version to 2.9-rc3 2013-01-13 20:00:25 +11:00
Andrew Tridgell b0c710b67f Copter: move read_AHRS() before run_rate_controllers() 
this ensures the rate controllers use the latest data
 2013-01-13 20:00:14 +11:00
rmackay9 f25f1cb3bf ArduCopter: changed alt hold to use the sonar if enabled and healthy 2013-01-13 19:56:19 +11:00
rmackay9 21b6c78d12 ArduCopter: added get_throttle_althold_with_slew to allow slower altitude target changes 
Improved surface tracking by using slewed althold controller
Reduced sonar mode filter to just 3 elements to reduce lag but at the possible consequence of allowing sonar noise to creep through for people with margin sonar set-ups.
 2013-01-13 19:51:47 +11:00
Pat Hickey 164246c7d8 ArduCopter: better instructons for setup_motors cli test 
* i just spent hours confused about this
 2013-01-13 00:17:17 -08:00
Andrew Tridgell 72c8a14e76 Copter: fix trad heli log build 2013-01-13 17:57:47 +11:00
Andrew Tridgell 78fd5bb23f Copter: get rid of remaining Log.pde warnings 2013-01-13 17:53:39 +11:00
Andrew Tridgell 36e38eeef7 Copter: ensure ahrs.init() is called 2013-01-13 17:32:48 +11:00
Andrew Tridgell 3039c37f95 Copter: use macros from common header 2013-01-13 17:31:42 +11:00
Pat Hickey d7eeeab79e ArduCopter: fix new style Log.pde build for PX4. 
randy - you should please review these changes to make sure you wanted
to have the int16_t type in all of these structs, or how you want to
convert all these other integer types to int16_t if you do need it that
way.
 2013-01-12 13:11:25 -08:00
Randy Mackay 87627d883b ArduCopter: use new logging method for remaining packet types 
Additional changes include renaming RAW dataflash type to IMU
 2013-01-13 00:17:44 +09:00
Randy Mackay 177da0ca74 ArduCopter: fixed minor bug in logging of parameter changes to dataflash 
It is questionable whether we should even bother writing these to the
dataflash as there is no way to recognise which parameter has been
affectded
 2013-01-13 00:15:34 +09:00
Randy Mackay b4bbae56c6 ArduCopter: reduce redundant event logging 
We now only write state changes to the dataflash log when they have
changed.
Also replaced <tab> with <space> in AP_State.pde
 2013-01-13 00:13:10 +09:00
Andrew Tridgell af478d52bc Copter: use the new logging methods for 2 packet types 
the rest still need to be converted
 2013-01-12 18:15:23 +11:00
Andrew Tridgell 0fe7901422 Copter: only print perf data when SCHED_DEBUG is non-zero 2013-01-12 12:06:40 +11:00
Andrew Tridgell dcb181d2d8 Copter: use new AP_Scheduler library 2013-01-12 12:02:57 +11:00
Andrew Tridgell 585459ece9 Copter: tweak the serial buffer sizes 
we only need the large buffers for HIL
 2013-01-11 10:31:55 +11:00
Andrew Tridgell 2e57720444 Copter: move memcheck_init() earlier in setup 2013-01-11 10:24:21 +11:00
Andrew Tridgell 21e979910f Copter: improved 'FRAME' docs 2013-01-10 15:44:13 +11:00
Pat Hickey 0ff6ed12b1 ArduCopter Makefile: Don't include targets.mk directly (included by apm.mk) 2013-01-09 13:15:38 -08:00
James Bielman 7374e5d84e ArduCopter: Use 16-bit arithmetic when comparing event tick counters. 
- On the ARM, once the tick counter wrapped, we stopped running events
  because the wraparound case wasn't being handled correctly.  Make
  sure the comparison is 16 bits to prevent this.
 2013-01-09 11:19:52 -08:00
James Bielman 7827a4a54a ArduCopter: Add AP_HAL_SMACCM support. 
- Added default configuration to "config.h".
- Added main function to run under FreeRTOS with HWF4.
 2013-01-09 11:19:51 -08:00
James Bielman ab37f833db MS5611: Fix CONFIG_MS5611_SERIAL definitions. 
- Make sure the values are defined as integers.  We were always using
  SPI rather than using I2C when desired.
 2013-01-09 11:19:51 -08:00
Andrew Tridgell e575c5eba0 Copter: read baro at 50Hz 2013-01-09 23:46:05 +11:00
Andrew Tridgell 269804e866 Copter: use barometer.accumulate() 
this gives us more consistent timing and faster baro reads on APM1
 2013-01-09 23:08:19 +11:00
Andrew Tridgell 91ad870f11 Copter: check bitmask in more logging functions 2013-01-09 23:06:40 +11:00
Andrew Tridgell a237b6cc7b Copter: update for new AP_Param API 2013-01-09 13:30:58 +11:00
Andrew Tridgell 860f4b2605 Copter: merge the latest 2.9 changes into master 2013-01-08 14:37:40 -08:00
Andrew Tridgell d11dde578f Copter: a useful bit of timing debug code 
enable when looking at main loop timing
 2013-01-07 11:07:44 +11:00
Andrew Tridgell 647b3b09b6 Copter: ensure we process deferred mavlink messages 2013-01-07 11:07:39 +11:00
Andrew Tridgell d952ccf968 Copter: added main_loop_ready() function 
this tells us when the main loop is ready to run. MAVLink won't send a
message if the main loop could run.
 2013-01-07 11:07:34 +11:00
Andrew Tridgell b079a96eaf Copter: removed GPS_STATUS message 
this message is huge, and completely pointless now that we have
num_satellites in GPS_RAW_INT
 2013-01-05 20:39:31 +11:00
Andrew Tridgell c48714be16 Copter: enabled PX4 sensors 2013-01-05 20:39:31 +11:00
James Bielman 264db3670e AP_Baro: Add CONFIG_MS5611_SERIAL option to choose between SPI and I2C. 
- Update ArduCopter and ArduPlane modules to pass the correct serial
  driver to the MS5611 driver.
- Update barometer examples, assuming SPI.
 2013-01-03 13:48:06 -08:00
rmackay9 ed79e8c954 ArduCopter: correct TRIM_THROTTLE parameter comments 2013-01-03 00:39:18 +09:00
rmackay9 861a66e26e ArduCopter: remove @brief from GCS_MAVLINK class's comments because they mess up the mission planner's parsing of parameter descriptions 2013-01-03 00:34:10 +09:00
rmackay9 ba8e9c8f9e ArduCopter: revert path for reading gcs parameter descriptions 2013-01-02 23:51:27 +09:00
rmackay9 d56e9cc701 ArduCopter: change path for GCS_Mavlink parameter descriptions 2013-01-02 23:42:05 +09:00
rmackay9 4ef7e7b1c6 ArduCopter: add parameter descriptions for GCS_Mavlink objects 2013-01-02 23:36:48 +09:00
Andrew Tridgell 94e3322e24 Copter: fixed build on px4 2013-01-02 22:09:02 +11:00
rmackay9 886329898c ArduCopter: minor fixup to a few parameter descriptions 2013-01-02 18:50:25 +09:00
rmackay9 ac028cca74 ArduCopter: remove spaces to allow MP to parse RC Channel parameter descriptions 2013-01-02 18:40:59 +09:00
rmackay9 42a5d183da ArduCopter: added parameter descriptions for optflow, throttle and loiter pid controllers 2013-01-02 18:32:11 +09:00
rmackay9 ffa923981c ArduCopter: added parameter description for navigation and some throttle controllers 2013-01-02 17:44:21 +09:00
rmackay9 4a975d35ce ArduCopter: add parameter descriptions for loiter's lat and lon rate controllers 2013-01-02 17:20:58 +09:00
rmackay9 c595a1e9a2 ArduCopter: updated parameters for roll, pitch and yaw rate controllers. 
Also added reference to AP_Motors_Class.cpp so that parameter descriptions can be seen in mission planner.
 2013-01-02 17:05:57 +09:00
Andrew Tridgell 374af1cd14 build: change from Arduino.mk to apm.mk 2013-01-02 17:29:37 +11:00
Andrew Tridgell e56a7eacec Copter: don't pass board version to motors 2013-01-02 15:28:34 +11:00
Andrew Tridgell 394dccf9a8 Copter: make config defaults match 2.9 2013-01-02 15:27:42 +11:00
Andrew Tridgell ead38f917f Copter: use GRAVITY_MSS 2013-01-02 14:45:08 +11:00
Robert Lefebvre b9594e7123 Parameters: Fixing a typo 2013-01-01 20:13:00 -05:00
Andrew Tridgell 4236b10edc Copter: fixed board ID string 2013-01-02 10:18:05 +11:00
Andrew Tridgell 17a63dc76a Copter: fixes for AP_HAL merge 2013-01-02 09:55:55 +11:00
Andrew Tridgell 51d987a890 Copter: removed unusued variable 2013-01-02 09:55:55 +11:00
rmackay9 9b2956b377 ArduCopter: increase throttle rate P to 6.0 (was 1.0) and alt hold P to 2.0 (was 1.0) 2013-01-02 09:55:37 +11:00
rmackay9 228ad2198f ArduCopter: update firmware version to 2.9-rc2 2013-01-02 09:55:37 +11:00
rmackay9 2181ec2ab0 ArduCopter: log watchdog event to dataflash 2013-01-02 09:55:37 +11:00
rmackay9 16f99ebcab ArduCopter: fix to sub system used to record failsafe in dataflash ERR message 2013-01-02 09:55:37 +11:00
rmackay9 672fdfbf71 ArduCopter: added ERR dataflash message 
Failsafe events changed to errors so they are more obvious.
Errors recorded to dataflash for failure to init compass and optical flow sensor.
Errors recorded for pwm failure.
Resolved a compile error when dataflash logging is disabled.
 2013-01-02 09:55:37 +11:00
rmackay9 677b38a48e ArduCopter: first implementation of surface tracking using sonar 
Note: not yet enabled as part of any flight mode
 2013-01-02 09:55:37 +11:00
rmackay9 92e271e517 AP_InertialNav: increase baro delay to 0.5 sec (was 0.2sec) to allow slower baro updates on APM1 2013-01-02 09:55:37 +11:00
rmackay9 d400e5040b ArduCopter: turn on INERTIAL_NAV_Z in the config.h file so that it takes effect when built for the mission planner 2013-01-02 09:55:37 +11:00
rmackay9 daac540e08 ArduCopter: get_throttle_althold - add check to avoid divide by zero 2013-01-02 09:55:37 +11:00
rmackay9 0decd870dc ArduCopter: inertial nav - only initialise horizontal position when home is initialised 2013-01-02 09:55:37 +11:00
rmackay9 4c14010029 ArduCopter: update release notes for 2.9-rc1 2013-01-02 09:55:37 +11:00
rmackay9 576af6d487 ArduCopter: bug fix to althold desired rate calculation. Fix from Jonathan. 2013-01-02 09:55:37 +11:00
rmackay9 02bf3ea027 ArduCopter: Battery failsafe triggers RTL only if we are more than 15m from home, otherwise it performs a LAND 2013-01-02 09:55:37 +11:00
rmackay9 ff40fa6aab ArduCopter: alt hold bug fix - should use 2x linear distance when calculating the desired rate 
Bug fix from Leonard.
 2013-01-02 09:55:37 +11:00
rmackay9 68b62abd38 ArduCopter with the new Camera and Relay classes for APM1 and APM2. 
All changes by Sandro Benigno
 2013-01-02 09:55:37 +11:00
rmackay9 393c893cdb ArduCopter: bug fix (attempt #2) for accel based throttle controller 
Thanks to Jonathan for this.
 2013-01-02 09:25:58 +11:00
rmackay9 e583ade62d ArduCopter: bug fix to accel based throttle controller (was using m/s instead of cm/s) 2013-01-02 09:24:31 +11:00
rmackay9 e77b54c7dc ArduCopter: bug fix to GUIDED mode. Now checks that desired altitude was reached before deciding the waypoint is complete. 2013-01-02 09:24:31 +11:00
rmackay9 e850ab7ccd ArduCopter: add AUTO_VELZ_MIN, AUTO_VELZ_MAX and PILOT_VELZ_MAX to allow better control of climb/descent rate in auto and manual throttle modes 2013-01-02 09:24:31 +11:00
Craig@3DR 0ed25cf719 Global change all references from 
GPS_PROTOCOL_MTK16
to
GPS_PROTOCOL_MTK19
 2013-01-02 09:24:31 +11:00
rmackay9 5526ca204c ArduCopter: on throttle failsafe, only initiate RTL if we are at least 15m from home 2013-01-02 09:22:51 +11:00
rmackay9 466097b383 ArduCopter: use inertial nav for current altitude and climb rate 2013-01-02 09:22:51 +11:00
rmackay9 5ba363b007 ArduCopter: move gcs_check function (which sends to ground station) to run when 50hz loop is not running 
Also removed redundant heartbeat message
 2013-01-02 09:21:35 +11:00
rmackay9 331a73c4ac ArduCopter: remove duplicate (?) send of MSG_EXTENDED_STATUS1 2013-01-02 09:20:08 +11:00
rmackay9 6baddf4aee ArduCopter: remove unused variable last_5hz 2013-01-02 09:20:08 +11:00
rmackay9 1f5fdcdaa8 ArduCopter: remove unnecessary "Initialising APM message..." 2013-01-02 09:20:08 +11:00
Jason Short 8b62c4630b ACM: Restore Multi-mode support 2013-01-02 09:20:08 +11:00
rmackay9 bd0e018ca0 ArduCopter: restore auto-trim method but now use AHRS.add_trim 2013-01-02 09:20:08 +11:00
Craig@3DR e350bfbba8 Removed 2 more degree symbols from comments 2013-01-02 09:20:08 +11:00
rmackay9 b786cf40f7 ArduCopter: change GPS dataflash message to output unfiltered gps lat and lon 2013-01-02 09:19:39 +11:00
rmackay9 d3cbf733ba ArduCopter: ensure RTL performs a land if a failsafe has been triggered 2013-01-02 09:19:39 +11:00
Robert Lefebvre 6e64b1b357 ACM: Precision Loiter RePositioning code. 
Protected behind a #define
 2013-01-02 09:19:39 +11:00
rmackay9 0fa6fdf407 ArduCopter: remove unused wait_for_yes function 2013-01-02 09:19:39 +11:00
rmackay9 e6519330f4 ArduCopter: remove unused rc_override variables to save 21 bytes 2013-01-02 09:19:17 +11:00
rmackay9 396024e802 ArduCopter: move scaleLongUp and scaleLongDown initialisation to init_home 2013-01-02 09:19:17 +11:00
rmackay9 7a5e4b8549 ArduCopter: stop unnecessary updates of target altitude and knock-on effect of too many EV message in dataflash log 2013-01-02 09:19:17 +11:00
rmackay9 1b5ff6aac6 ArduCopter: restore initial climb to RTL 2013-01-02 09:19:17 +11:00
rmackay9 52802cb29e ArduCopter: limit output throttle to 800 only for TRI which does not have the new stability patch 2013-01-02 09:19:17 +11:00
rmackay9 34e18ae12a ArduCopter: increase accel based throttle PIDs and add D term to rate based throttle 2013-01-02 09:19:17 +11:00
rmackay9 ac8af9a53f ArduCopter: Leonard Hall's changes to alt hold including adding low pass filter to climb rate 
get_throttle_rate_stabilized changed to simply update the target altitude instead of talking directly to the rate controller.
get_throttle_althold changed to use sqrt of distance when calculating the desired rate towards the target altitude.
added reset of accel based throttle PID's I term.
unrelated small bug fix from Randy to allow CH6 tuning of throttle rate D term.
 2013-01-02 09:19:17 +11:00
rmackay9 f4c50353b9 ArduCopter: allow tuning of the Throttle Rate D term 2013-01-02 09:16:48 +11:00
Robert Lefebvre 9605bd8ee1 ACM: Trying to set a default MPU6K filter rate of 10Hz for TradHeli. Doesn't Work. 2013-01-02 09:14:55 +11:00
rmackay9 d926360e81 ArduCopter: move gcs updates to run only when there are 4ms of spare time before the next 100hz iteration starts 2013-01-02 09:14:31 +11:00
rmackay9 881dae1e27 ArduCopter: remove throttle limit of 800 for quads, hexas and octacopters 
Note: Y6 and OctaQuads still have the 800 limit because they do not have the latest stability patch
 2013-01-02 09:13:42 +11:00
rmackay9 6da68c53a5 ArduCopter: bug fix so AP_Limits does not use up memory if it is disabled 2013-01-02 09:13:42 +11:00
rmackay9 d8e3d5c10c ArduCopter: allow RTL's yaw mode to be overridden with a #define in APM_Config.h 2013-01-02 09:12:40 +11:00
rmackay9 5633164fa0 ArduCopter: bug fix for compass.accumulate check in main loop (millis vs micros issue) 2013-01-02 09:12:40 +11:00
rmackay9 50d46898fb ArduCopter: allow GUIDED mode roll-pitch, yaw and throttle control modes to be overridden 2013-01-02 09:12:17 +11:00
rmackay9 ddc578fd18 ArduCopter: restore YAW to default AUTO_YAW mode instead of YAW_LOOK_AT_NEXT_WP mode 2013-01-02 09:12:17 +11:00
rmackay9 0ab82f8c4e ArduCopter: clear ahrs roll and pitch trims after an accel level command 2013-01-02 09:12:17 +11:00
rmackay9 7ea34d4fb7 ArduCopter: updated accel based throttle to use ahrs's get_accel_ef method 
Also removed slow low pass filter meant to correct for accelerometer calibration.  This is no longer required now that we have the improved calibration method.
 2013-01-02 09:11:25 +11:00
rmackay9 4dfe3a2d73 ArduCopter: remove weird character from navigation.pde 2013-01-02 09:11:25 +11:00
Robert Lefebvre ab95f04a91 ACM: TradHeli 
Change name of attitude rate feed-forward parameters.
 2013-01-02 09:10:40 +11:00
rmackay9 8e032b89ee ArduCopter: create 2.9 branch and update firmware version 2013-01-02 09:10:40 +11:00
Andrew Tridgell cf8e648558 CLI: fixed accel setup 
disable mavlink callback in CLI
 2012-12-24 08:51:33 +11:00
Andrew Tridgell 9931009db2 Math: use pythagorous2() in some more places 2012-12-20 15:16:18 +11:00
Andrew Tridgell 78d98023f4 Copter: remove use of 'byte' 2012-12-20 14:58:07 +11:00
Pat Hickey 1878290510 ArduCopter: fixes for AP_InertialSenor_UserInteract 2012-12-20 14:53:23 +11:00
Andrew Tridgell 3c0440b0b4 Math: use common degrees() and radians() functions 2012-12-20 14:53:22 +11:00
Andrew Tridgell 06357c40f2 Copter: use new functions 2012-12-20 14:53:22 +11:00
Pat Hickey 2ad4fed8cd Rover/Copter/Plane: change from vsnprintf to vsnprintf_P 2012-12-20 14:52:38 +11:00
Pat Hickey 54b98c0a7c ArduPlane: use hal's vsnprintf 2012-12-20 14:52:37 +11:00
Andrew Tridgell a02f723f3a Copter: fixed HIL builds 2012-12-20 14:52:37 +11:00
Andrew Tridgell 2e8e84ba8b Copter: switch to using targets.mk 2012-12-20 14:52:36 +11:00
Pat Hickey eb530b86e8 move Arduino.mk to /mk/Arduino.mk 2012-12-20 14:52:35 +11:00
Andrew Tridgell 9e986801c9 Copter: fixed SITL for ArduCopter 2012-12-20 14:52:34 +11:00
Andrew Tridgell 08b1c2d590 Copter: fixed GPS init 2012-12-20 14:52:33 +11:00
Pat Hickey 9a28ed2df6 ArduCopter: refactor Makefile targets in terms of Arduino.mk targets 2012-12-20 14:52:31 +11:00
Andrew Tridgell 7d27e420ae AP_HAL: remove unnecessary Arduino.h includes 2012-12-20 14:52:30 +11:00
Pat Hickey 22ac39a4ef ArduCopter: disable and remove InertialNav defines from APM_Config 
* We're not going to have the RAM available to support those in general release
 2012-12-20 14:52:29 +11:00
Pat Hickey d5d97be837 ArduCopter: add param loader properly implement parameters 
* thanks tridge!
 2012-12-20 14:52:29 +11:00
Pat Hickey 5e63491994 ArduCopter: fix issues with HAL/HIL mixup and baro/compass instances 2012-12-20 14:52:29 +11:00
Pat Hickey 21d0da84a6 ArduCopter: temporarily disable AP_Param::setup_sketch_results 
* rebased away tridge's AP_Param changes as they seemed possibly buggy?
 2012-12-20 14:52:29 +11:00
Pat Hickey a0151aa66c ArduCopter: fix cliSerial null ptr, do AP_Param::setup_sketch_defaults 
* plus make SITL DataFlash available.
 2012-12-20 14:52:29 +11:00
Pat Hickey 1e48d0fc69 Makefile Targets rewritten to use per-target extension style 2012-12-20 14:52:29 +11:00
Pat Hickey 524e52f449 ArduCopter: changed makefile to inherit environments properly 2012-12-20 14:52:29 +11:00
Pat Hickey d93d932831 ArduCopter: defines fixes 
Conflicts:

	libraries/AP_Common/Arduino.mk
 2012-12-20 14:52:28 +11:00
Pat Hickey 2aa4657315 ArduCopter: changes to use CONFIG_HIL_BOARD 2012-12-20 14:52:28 +11:00
Pat Hickey ade7099d75 ArduCopter: add AP_HAL_MAIN 2012-12-20 14:52:28 +11:00
Pat Hickey 5bd7046a95 ArduCopter: sketch cpp builds! 2012-12-20 14:52:28 +11:00
Pat Hickey 8b49208771 ArduCopter: some fixes 2012-12-20 14:52:28 +11:00
Pat Hickey 13c044ab3e ArduCopter: fixes to radio.pde 2012-12-20 14:52:28 +11:00
Pat Hickey 7af03127f6 ArduCopter: more work 2012-12-20 14:52:28 +11:00
Pat Hickey b90889dd11 ArduCopter: add ArduPlane's compat.h & compat.pde 2012-12-20 14:52:28 +11:00