Mirror/ardupilot
5
0
Fork 0
mirror of https://github.com/ArduPilot/ardupilot synced 2025-01-02 14:13:42 -04:00
Code Issues Packages Projects Releases Wiki Activity
17,743 Commits 71 Branches 509 Tags 744 MiB
62d5e7ca92
Commit Graph

8550 Commits

Author SHA1 Message Date
Robert Lefebvre
bfc10c1969 AC_AttitudeControl_Heli: Remove Accel Feedforward. 2015-07-30 14:22:53 +09:00
Randy Mackay
5032cf9fbc Copter: init multicopter flags 
Resolves coverity warning

Also fixed indentation
 2015-07-25 14:00:29 +09:00
Michael du Breuil
9d53aa77eb AP_GPS: Add reboot required docstring 2015-07-25 10:56:19 +09:00
Randy Mackay
b13921a7aa Mount_SToRM32: find gimbal channel on startup 2015-07-25 10:53:05 +09:00
Randy Mackay
e7df54ca75 GCS_MAVLink: static find_by_mavtype method 2015-07-25 10:53:03 +09:00
Randy Mackay
e092902613 GCS_MAVLink: add find_by_mavtype 2015-07-25 10:52:59 +09:00
Peter Barker
1ee330ebb2 DataFlash: CLI log dumping - don't truncate lines that contain doubles 
We currently print doubles out as if they were floats.  The ftoa_engine isn't something to replicate for doubles lightly!
 2015-07-24 08:08:51 +10:00
Peter Barker
39b2cdcc3c AP_Menu: avoid segmentation fault 
Insufficient input would cause a segfault
 2015-07-24 08:05:13 +10:00
Randy Mackay
3dfb447fd7 BattMon: has_current true for Bebop 
The bebop does not actually provide current but it does estimate the
percentage of battery remaining
 2015-07-23 21:49:32 +09:00
Randy Mackay
8403b504d1 BattMon: add Bebop to monitor param description 2015-07-23 21:49:32 +09:00
Randy Mackay
9482578c60 BattMon: Bebop always uses bebop batt monitor 2015-07-23 21:49:31 +09:00
Randy Mackay
84b6ab0707 BattMon_Bebop: use ARRAY_SIZE 
Also remove printf of failure message, instead we should add the battery
monitor health to the SYS_STATUS message sent to the ground station
 2015-07-23 21:49:30 +09:00
Randy Mackay
3b36178a0b BattMon_Bebop: init members in constructor 2015-07-23 21:49:29 +09:00
Jean-Baptiste Dubois
f6aba6c952 HAL_Linux: add read_obs_data to RCOutput_Bebop 2015-07-23 21:49:28 +09:00
Jean-Baptiste Dubois
35ae562dbe AP_BattMonitor: Add battery support for Bebop Hardware 2015-07-23 21:49:27 +09:00
Andrew Tridgell
54254c89d7 AP_Arming: control rudder arming with ARMING_RUDDER parameter 
allow for 3 states:

 0: no rudder arming
 1: arm only
 2: arm and disarm
 2015-07-23 21:48:50 +10:00
Lucas De Marchi
8240e5ae65 AP_Compass: AK8963: reduce bytes read 
We are not using INFO and ST1 registers, so there's no need to read
extra 2 bytes for each transaction.
 2015-07-23 17:44:36 +10:00
Lucas De Marchi
2b9c46e1ff AP_Compass: AK8963: don't oversample AK8963 
Reduce the frequency with which MPU9250 reads AK8963 to reduce the
chance of errors.
 2015-07-23 17:44:36 +10:00
Lucas De Marchi
6c2ceea165 AP_Compass: AK8963: remove author and connection comment 
Authorship and how sensor is connected get outdated (as it already is).
Our code is on git so let it track who wrote each line.
 2015-07-23 17:44:36 +10:00
Staroselskii Georgii
8ab33c46ce AP_Compass: revisited AK8963 code 
Reduced duplication a bit and revisited the update method which is now
split into several logical hunks.
 2015-07-23 17:44:36 +10:00
Lucas De Marchi
fffedae3e0 AP_Compass: AK8963: reduce stack usage and zero out buffers 
Since we are not using MPU9250's fifo to get samples from AK8963 we will
always read only 1 sample (+ control registers).
 2015-07-23 17:44:35 +10:00
Lucas De Marchi
37734886a5 AP_Compass: AK8963: remove repeated comments 
No need to repeat the same comments on 3 different places. Instead add a
single comment to explain how start_measurements() and read_raw() are
related.
 2015-07-23 17:44:35 +10:00
Lucas De Marchi
27d95b67a8 AP_Compass: AK8963: remove state machine 
Don't use a state machine in AK8963: the start_measurements() method
should be called only once.  Even if there's a magnetic sensor overflow
the only thing we should do is to discard the new data.

This also moves the _collect_samples() method to be inside _update()
since it's the only place it should be called from, the one running on
the timer thread.
 2015-07-23 17:44:35 +10:00
Lucas De Marchi
e232543fca AP_Compass: AK8963: change initialization and rename methods 
We need to check the AK8963's id before anything else Here we are
reordering the calls to _calibrate() and _check_id(). After that we
don't need to read and write again the AK8963_CNTL1 register.

While at it do some renames as well:
	- _configure() -> _setup_mode(): since now there's a
 	  _bus->configure() it became confusing what actually it's
	  doing.
	- make error messages say what we were actually trying to do but
	  couldn't. Also remove PSTR since this is linux-only.
	- start_conversion() -> start_measurements():  We are instructing the
          bus to start to get the samples, not to tell the chip to start an
          analog->digital conversion like in other sensors.
 2015-07-23 17:44:35 +10:00
Lucas De Marchi
ae5d9baddb AP_Compass: AK8963: remove defines not used anymore 
The MPUREG_PWR_MGMT_1 defines were used when we cared about the MPU9250
initialization code. Now all initialization is done by the MPU9250 class
itself, so remove these defines.

Also remove AK8983_SELFTEST_MAGNETIC_FIELD_ON that is never used and let
the defines always with 2 bytes to improve readability.
 2015-07-23 17:44:34 +10:00
Lucas De Marchi
cae895bfdf AP_Compass: AK8963: group members together 
Besides being semantically related, this removes the hole due to
alignment. The size is the same since the hole is actually turned into
padding.
 2015-07-23 17:44:34 +10:00
Lucas De Marchi
28d3d775a4 AP_Compass: AK8963: remove resolution member 
We only use the highest one and there's no intention to support the
14bits one. Just use the define rather than saving it as a member.
 2015-07-23 17:44:34 +10:00
Lucas De Marchi
86b3312112 AP_Compass: AK8963: factor out common code of read_raw() 
Similar code was added in the read_raw() implementation for each bus.
Add a new POD struct read_raw to contain the registers from the AK8963
and use it instead as argument.
 2015-07-23 17:44:33 +10:00
dgrat
d941174978 AP_Compass: AK8963: enhance the readability 
Reduce the deepness of indentation and fix coding style.
 2015-07-23 17:44:33 +10:00
Randy Mackay
28c722c157 AC_Circle: rate change takes effect immediately 2015-07-23 16:21:20 +09:00
Tom Pittenger
d51e6d466b AP_HAL_SITL: add support for airspeed failures 2015-07-23 14:38:06 +10:00
Tom Pittenger
250dcd31a2 SITL: Add ARSP_FAIL param 
This will allow testing pitot tube hardware failures
 2015-07-23 14:38:06 +10:00
Staroselskii Georgii
d7ac725a64 AP_HAL_Linux: fixed signal handler in RCInput_Navio 
DMA is getting stopped in the separate method now. This is the best we
can get at the current time. It does yield slightly better experience
and works in the majority of cases.

The patch is a no bulletproof solution, though.

There's a possibility of corruption in case of e.g. a SIGKILL. There's
no signal framework at the time and the commit doesn't add one. That's
why all signals are handled in the same erroneous way. This is not a
good nor a final solution to the issue.

For the issue at hand a better fix might be porting the code to kernel
space but it's a rather tediuos task that we cannot undertake in the
couple of weeks.
 2015-07-23 08:51:38 +10:00
Staroselskii Georgii
8528a7d159 AP_HAL_Linux: added deinit logic for RCInput_Navio 
DMA needs to be stopped if a panic occurs.
 2015-07-23 08:51:37 +10:00
Staroselskii Georgii
f4d14f73ba AP_HAL_Linux: extended panic handling with RCInput deinitialization 
The issue has already come up. There's no deinitialization mechanisms at the moment. As APM is rather software than firmware on Linux, there're some clean-up work that needs to be done. This commit triggers deinitialization of RCInput on a panic.
 2015-07-23 08:51:37 +10:00
Vladislav Zakharov
97b51a4bcb AP_HAL: Added deinit() method to RCInput 
Add a deinit() counterpart. This is needed for some ports that require some deinitializtion logic. The default implementation is empty. I'm not sure whether we need to inforce it for all.
 2015-07-23 08:51:37 +10:00
Tom Pittenger
9737c426eb SITL: Gazebo index out of bound 
- imu_orientation_quat[size=3] is fed to Quaternion[size=4] which causes an index-out-of-range problem
 2015-07-22 21:33:46 +10:00
Michael du Breuil
59dda49cce AP_GPS: Fix missing reserved fields in the UBX-RXM-RAWX message 2015-07-22 21:31:10 +10:00
Michael du Breuil
09fef505e0 AP_GPS: With a ublox driver, accept a packet if it will fit in the buffer 2015-07-22 21:31:10 +10:00
Michael du Breuil
22b16b4532 AP_GPS: Enable selecting what GNSS system to use if the reciever supports it 
Ublox 7 and 8 seires use a UBX-CFG-GNSS message to enable satellite constellations. The default value does not enable any additional ones, and any constellations the reciever doesn't report knowing about are not configured.
 2015-07-22 21:31:10 +10:00
Michael du Breuil
47592a1953 AP_GPS: Raise the baud rate on a ublox GPS if using RAW logging 
the implementation leaves an easy path forward for providing a different startup blob for all the GPS's if raw logging is enabled
 2015-07-22 21:31:09 +10:00
Michael du Breuil
19bb96b9cb AP_GPS: Improve startup logic for detecting what gps is connected 
Remove race condition on sending intial blob to the GPS, it was possible to send a blob that got the GPS configured enough to allow the autodetect to take over (and then some drivers like ublox would not finish sending the blob, which has potential details that the driver might have needed to send)

Limit the delay to checking for NMEA gps to only checking after all the available baud rates have been checked

Since a UBlox will actually report having DGPS (due to SBAS or RTCM data) actually report this as the highest supported mode
 2015-07-22 21:31:09 +10:00
Arthur Benemann
e3398648d7 GCS_MAVLink: fix debug formatting 2015-07-21 21:41:34 +09:00
Randy Mackay
521f3dc4b9 GCS_MAVLink: only forward msg once per channel 
Issue found and alternative fix provided by Arthur Benemann
 2015-07-21 21:41:32 +09:00
Randy Mackay
6f72d202fe GPS: fix parameter descriptions 2015-07-21 19:50:12 +09:00
Randy Mackay
e31f2d26c4 MotorsMulticopter: move get_hover_throttle_as_pwm to protected 
No functional change
 2015-07-21 16:27:04 +09:00
Randy Mackay
c7c6228b5d MotorsMulticopter: remove virtual from set_yaw_headroom 2015-07-21 16:27:01 +09:00
Randy Mackay
157c97447d AC_AttControlHeli: init passthrough_yaw 2015-07-21 16:26:27 +09:00
Randy Mackay
8b4805bfcb AC_AttControl_heli: add MotorsHeli include 2015-07-21 16:25:56 +09:00
Randy Mackay
bf2bf2e3fa AC_AttControl_Multi: new multirotor specific attitude control class 2015-07-21 16:25:53 +09:00
Randy Mackay
93dd7dd970 AC_AttControl: get_boosted_throttle purely virtual 2015-07-21 16:25:50 +09:00
Randy Mackay
4843be49de AP_MotorsTri: remove call to empty parent Init 
Also rename uses of Multirotor to Multicopter
 2015-07-21 16:25:48 +09:00
Randy Mackay
f906934dfa AP_MotorsSingle: remove call to empty parent Init 
Also rename uses of Multirotor to Multicopter
 2015-07-21 16:25:45 +09:00
Randy Mackay
112e934072 AP_MotorsMatrix: remove call to empty parent Init 
Also rename uses of Multirotor to Multicopter
 2015-07-21 16:25:43 +09:00
Randy Mackay
b1a4a6bf0a AP_Motors_Coax: remove call to empty parent Init 
Also rename uses of Multirotor to Multicopter
 2015-07-21 16:25:40 +09:00
Randy Mackay
4d1dfd94f5 AP_MotorsMulticopter: multicopter features moved in from parent 
Also rename from multirotor to multicopter
 2015-07-21 16:25:37 +09:00
Randy Mackay
7355ac9cb8 AP_MotorsHeli: implement empty slow start method 2015-07-21 16:25:34 +09:00
Randy Mackay
a3fab10ef4 AP_MotorsHeli: init roll_radio_passthrough 2015-07-21 16:25:31 +09:00
Randy Mackay
c9dedbd3b2 AP_Motors: remove multicopter only features 
Also rename uses of Multirotor to Multicopter
 2015-07-21 16:25:28 +09:00
Robert Lefebvre
abb6eba291 AP_MotorsHeli: Change allow_arming check to use _rotor_speed_estimate 
In future, this will be used to check actual rotor speed (measured) if available, to prevent trying to arm with the rotor spinning.
 2015-07-21 16:25:21 +09:00
Robert Lefebvre
9fcbc77ce0 AP_MotorsHeli: Create rotor_speed_above_critical accessor 2015-07-21 16:25:11 +09:00
Robert Lefebvre
992c9c75bb AP_MotorsHeli: Create parameter_check method. 2015-07-21 16:25:04 +09:00
Robert Lefebvre
e2fe640e6c Copter: Clean up helicopter allow_arming() function 2015-07-21 16:24:58 +09:00
Robert Lefebvre
61d6c5aa1d AP_Motors: Creation of AP_Motors_Multirotor class 2015-07-21 16:24:38 +09:00
Lucas De Marchi
5c9bf90d94 SITL: use ARRAY_SIZE macro 2015-07-21 14:25:19 +09:00
Lucas De Marchi
fd5d25b1d5 AP_Compass: use ARRAY_SIZE macro 2015-07-21 14:25:17 +09:00
Lucas De Marchi
3136b8916c DataFlash: use ARRAY_SIZE macro 2015-07-21 14:25:15 +09:00
Lucas De Marchi
d8b70dc0c5 AP_Scheduler: use ARRAY_SIZE macro 2015-07-21 14:25:13 +09:00
Lucas De Marchi
fdc6a75124 AP_Menu: use ARRAY_SIZE macro 2015-07-21 14:25:10 +09:00
Lucas De Marchi
0471de2342 AP_Math: use ARRAY_SIZE macro 2015-07-21 14:25:09 +09:00
Lucas De Marchi
eda4879f3f AP_InertialSensor: use ARRAY_SIZE macro 2015-07-21 14:25:07 +09:00
Lucas De Marchi
3f472fb9e1 AP_HAL_VRBRAIN: use ARRAY_SIZE macro 2015-07-21 14:25:05 +09:00
Lucas De Marchi
473415a3c2 AP_HAL_SITL: use ARRAY_SIZE macro 2015-07-21 14:25:03 +09:00
Lucas De Marchi
d4d56aef1a AP_HAL_PX4: use ARRAY_SIZE macro 2015-07-21 14:25:01 +09:00
Lucas De Marchi
cfc2972e51 AP_HAL_Linux: use ARRAY_SIZE macro 2015-07-21 14:24:58 +09:00
Lucas De Marchi
b83708f77f AP_HAL: use ARRAY_SIZE macro 2015-07-21 14:24:56 +09:00
Lucas De Marchi
9d59b43920 AP_GPS: use ARRAY_SIZE macro 2015-07-21 14:24:54 +09:00
Lucas De Marchi
4a595bd797 APM_Control: use ARRAY_SIZE 2015-07-21 14:24:52 +09:00
Lucas De Marchi
fb2eb262e7 AP_Math: use ARRAY_SIZE instead of defining another one 2015-07-21 14:24:49 +09:00
Randy Mackay
73ff01dc68 AP_Notify: replace unsigned int with uint8_t 2015-07-21 13:52:03 +09:00
Lucas De Marchi
1bba105be4 AP_Notify: don't manually define number of notify devices 
Like b211b86 (AP_HAL_Linux: don't manually define number of spi devices)
did for spi.
 2015-07-21 13:52:00 +09:00
Peter Barker
65813f308e DataFlash: fix incorrect comment 2015-07-21 13:11:00 +09:00
Randy Mackay
8225e58454 AP_Motors: throttle_min method in 0 to 1000 range 
Previously the pwm range value was returned.  This value is only used by
the multicopter attitude controller's angle boost function.
 2015-07-20 20:44:46 +09:00
Randy Mackay
6bf6442396 MotorsMatrix; protect against divide by zero 
This should never happen but just to be safe
 2015-07-20 20:44:43 +09:00
Randy Mackay
fa60c3dce8 MotorsCoax: fix output_armed_stabilized min thr limit 2015-07-20 20:44:36 +09:00
Randy Mackay
8a308205ce MotorsSingle: fix output_armed_stabilized min thr limit 2015-07-20 20:44:32 +09:00
Randy Mackay
bd9a605086 MotorsTri: fix output_armed_stabilized min thr limit 
_min_throttle is in the pwm range but was being used as if in the 0 to
1000 range
 2015-07-20 20:44:23 +09:00
Randy Mackay
e53c46bd8f MotorsMatrix: fix output_armed_stabilized min thr limit 
_min_throttle was being used as if it were in the 0 to 1000 range when
in fact it is in the pwm range.  This meant the lower limit was too low.
 2015-07-20 20:44:14 +09:00
Jean-Baptiste Dubois
7dcfe1c667 RCOutput_Bebop: group channels write 2015-07-20 09:23:13 +10:00
Andrew Tridgell
3b1b7ea029 AP_GPS: fixed time handling with NMEA driver 2015-07-20 09:15:32 +10:00
Julien BERAUD
a852e48f37 AP_GPS_NMEA: fix gps startup 
when no valid gps data, gps would restart in a loop. Take the frame without
gps fix into account for frame counting
 2015-07-20 09:14:15 +10:00
John Hsu
14e462706d SITL: added gazebo SITL shim 2015-07-20 09:10:48 +10:00
John Hsu
c34ddb7fb8 HAL_SITL: added gazebo SITL model support 2015-07-20 09:10:48 +10:00
Randy Mackay
a61129f7f8 GCS_MAVLink: add support for send_mission_item_reached 2015-07-19 12:14:09 +09:00
Randy Mackay
766ccea3be Mission: fix bug causing first do-cmd to be run many times 
The symptom was that if the very first command in the mission was a
do-command, it would be run after every nav-command that didn't have
another do-command before it.
 2015-07-17 12:15:08 +09:00
Randy Mackay
429346f4bc AP_Mission: add missing breaks to case statement 2015-07-17 12:15:06 +09:00
Randy Mackay
0acfcbfa81 NavEKF: use primary compass instead of first instance 
Thanks very much to staroselskii for finding this bug
 2015-07-17 10:02:42 +09:00
Randy Mackay
cedc9a8670 Compass: add last_update_usec per instance 2015-07-17 10:02:41 +09:00
Andrew Tridgell
69cfe11455 AP_Arming: raise accel arming threshold to 0.75 
arming issues due to accel inconsistency are too common
 2015-07-17 09:50:19 +10:00
Andrew Tridgell
18de1c2c47 GCS_MAVLink: send AHRS2 even if we don't have a secondary position 2015-07-17 08:24:49 +10:00
Andrew Tridgell
6009ae55b1 AP_Math: fixed build of eulers example sketch 2015-07-17 08:24:49 +10:00
Randy Mackay
cc0ab26f5d Mount: fix init of mode 
Mode was being set from MNT_DEFTL_MODE parameter before that parameter's
value had been initialised from eeprom
 2015-07-16 14:14:01 +09:00
Jean-Baptiste Dubois
9e5d13c1de RCOutput_Bebop: use CLOCK_MONOTONIC instead of CLOCK_REALTIME 
CLOCK_MONOTONIC is not affected by discontinuous jumps in the system time.
 2015-07-15 12:08:44 +02:00
Robert Lefebvre
14882bc6a8 AC_AttitudeControl: Remove unused takeoff jump #define 2015-07-14 20:16:58 +09:00
Robert Lefebvre
e1902e2289 AP_MotorsHeli: Remove unused _dt variable. 2015-07-14 20:13:43 +09:00
Randy Mackay
7d2fe3cc2b AP_GPS_UBlox: remove unused member 2015-07-14 15:02:15 +09:00
Randy Mackay
2c33250bee AP_GPS_UBlox: send_next_rate_update always runs all steps 
Moving the if, endif checks within the case statement ensures the state
machine goes through all 10 states
 2015-07-14 15:02:13 +09:00
Randy Mackay
4b015d2091 AP_GPS: remove compiler warnings 2015-07-14 15:02:10 +09:00
Randy Mackay
df3a04e284 AP_GPS: reduce fake Ublox hdop to 130 2015-07-14 15:02:08 +09:00
Andy Piper
5ccc58ffb4 AP_GPS: Read actual hDOP value from UBLOX messages 
Before we were reading the position DOP and calling it hDOP. Since the
other drivers actualy read hDOP it seem best to do the same.
Fixes issue 462.
 2015-07-14 15:02:03 +09:00
Paul Riseborough
610595bfb9 AP_NavEKF: Prevent position drift between arming and takeoff when using OF 2015-07-13 10:54:36 +09:00
Randy Mackay
2b4aaf2368 SITL: add vibe monitor and SIM_ACC2_RND to sitl 2015-07-12 16:50:30 +09:00
Paul Riseborough
8b4b0b9576 AP_NavEKF: Add accelerometer clip monitoring and isolation 
Isolates an accelerometer that is clipping  and attempts to use the one that is clipping less.
 2015-07-12 16:49:19 +09:00
Staroselskii Georgii
72820303d4 AP_HAL_Linux: set higher SPI speed for Navio 
We can set a higher speed on newer Linux kernels since
52469b2a38.
The older ones will just floor the value.
 2015-07-10 18:59:18 +10:00
Peter Barker
0028910428 AP_InertialNav: take reference to variable we are trying to update 
There are no callers to this function.  Perhaps it should be removed?
 2015-07-10 18:56:20 +10:00
Andrew Tridgell
4e0c2c5a9b AP_HAL: defined default log and terrain directories for bebop 
the /var filesystem is wiped on boot on Bebop. Use these as a
temporary workaround
 2015-07-10 16:46:31 +10:00
Andrew Tridgell
6df33dd3f4 AP_InertialSensor: fixed MPU6000_SPI bus initialisation 
we need _spi for get_semaphore()
 2015-07-10 16:46:30 +10:00
Julien BERAUD
954ec71630 HAL_Linux: added rcout implementation for bebop 2015-07-10 16:46:30 +10:00
Julien BERAUD
51c3c499e2 AP_Compass: support AK8963 on I2C 2015-07-10 16:46:30 +10:00
Julien BERAUD
0b41da0dea AP_Compass: rework to make the bus generic for AK8963 
Supporting only MPU9250, prepare to implement another bus, i.e i2c on the
bebop
 2015-07-10 16:46:29 +10:00
Julien BERAUD
0cd584c293 AP_Compass: fix rotation for bebop AK8963 
Set the correct rotation for bebop
 2015-07-10 16:46:29 +10:00
Julien BERAUD
7dd0b5fae6 AP_Compass: removed _spi_sem and _spi 2015-07-10 16:46:29 +10:00
Julien BERAUD
d407737434 AP_Baro: added MS5607 support 2015-07-10 16:46:29 +10:00
Julien BERAUD
3cf952d1f8 AP_InertialSensor: add fifo support for MPU6000 
And remove the use of data rdy in this case
 2015-07-10 14:24:09 +10:00
Julien BERAUD
8a76ff53bd AP_InertialSensor: add i2c bus driver for MPU6050 2015-07-10 14:24:09 +10:00
Julien BERAUD
1679728730 AP_InertialSensor: Configure SPI as a generic bus for MPU6000 
Add the possibility to implement an i2c bus communication for the
MPU6050 on parrot bebop
 2015-07-10 14:24:09 +10:00
Julien BERAUD
f0bed711cf AP_HAL: added AK8963 I2C defines 2015-07-10 14:23:18 +10:00
Julien BERAUD
e0b59942b0 AP_HAL: changed log directories for bebop 2015-07-10 14:23:18 +10:00
Julien BERAUD
5c414b4ca2 AP_HAL: Fix Compass I2C address for Bebop 2015-07-10 14:23:18 +10:00
Julien BERAUD
8d6123928f AP_HAL: Add i2c bus numbers and addresses 2015-07-10 14:23:18 +10:00
Julien BERAUD
bef8001a09 AP_HAL: added MS5607 baro define 2015-07-10 14:23:17 +10:00
Julien BERAUD
eea7ea8488 AP_HAL: split MPU6000 INS defines for I2C and SPI 2015-07-10 14:23:17 +10:00
Julien BERAUD
7275e33e79 AP_HAL: add the possibility to have more than 1 i2c 
Bebop drone has 3 i2c
 2015-07-10 14:23:17 +10:00
Andrew Tridgell
a6f62c208e AP_HAL: added bebop Linux board type 2015-07-10 10:22:59 +10:00
Julien BERAUD
b32259307d AP_GPS: Add baudrate 230400 for GPS 
Needed by bebop gps by default
 2015-07-10 10:12:52 +10:00
Andrew Tridgell
282efe2d57 AP_Baro: fixed example to run accumulate at 50Hz 2015-07-10 09:59:35 +10:00
Andrew Tridgell
c83d5b1f08 AP_Compass: only build AK8963 driver on Linux 
must match MPU9250 build
 2015-07-09 11:57:27 +10:00
Andrew Tridgell
f4a9f9876f HAL_PX4: make usb_connected() more robust 
thanks to a suggestion from Phillip Kocmoud, this should fix issues
with the XUAV-X2
 2015-07-08 11:19:07 +10:00
Randy Mackay
2f8a7f316f Notify: enable toshibaLED for NAVIO 2015-07-07 20:08:19 +09:00
Staroselskii Georgii
402f46c56f AP_Airspeed: fixed a typo in the ARSPD_DEFAULT_PIN define 
There was a redundant elif for Linux builds.
 2015-07-07 21:02:21 +10:00
Randy Mackay
1d732ddf62 Mount: param desc rename from MAVLink to 3DR Solo 2015-07-07 13:29:24 +09:00
mirkix
1b0f482d37 AP_RangeFinder: Add support for HC-SR04 Range Finder connected to BBB 2015-07-07 08:00:33 +10:00
Randy Mackay
d192b3ccea Compass: set device id for ak8963 and hmc5843 2015-07-06 21:04:46 +09:00
Randy Mackay
ad1f9c4829 DataFlash: add ORGN message 2015-07-06 12:11:49 +09:00
Randy Mackay
03356a8d3a OptFlow: fix parameter descriptions 2015-07-06 11:37:38 +09:00
dgrat
f56f584233 Compass: Improved field rounding in learning 
Signed-off-by: Daniel Frenzel <dgdanielf@gmail.com>
 2015-07-06 11:31:58 +10:00
Daniel Frenzel
c49e44d02c HAL_LInux: RCInput for Navio 
Cleaned the code a bit

Signed-off-by: Daniel Frenzel <dgdanielf@gmail.com>
 2015-07-06 11:19:33 +10:00
kozinalexey
20a04bad77 AP_GPS: request RMC message in NMEA driver 2015-07-06 11:16:12 +10:00
dzollo
5d5d9dc137 AP_GPS: Fix max/min bug on SBP buffering. Log messages whether SBP driver recognizes the msg_type or not. 2015-07-06 10:53:35 +10:00
Lucas De Marchi
efec7723ff AP_InertialSensor: reset the MPU9250 chip on startup 
Now that the initialization of MPU9250 is shared between the
AP_InertialSensor and other drivers using it as a backend, we can reset
the MPU9250 in order to put it in a known state.
 2015-07-06 10:48:07 +10:00
Lucas De Marchi
1deb837e70 AP_Compass: Use common function in MPU9250 for initialization 2015-07-06 10:48:07 +10:00
Lucas De Marchi
eb4e2ac2e5 AP_InertialSensor: factor out MPU9250 initialization 
Now we have the initialization code split in 2 parts:

1) Making sure the MPU9250 chip is alive and working: this is now in a
static function that may be called by other drivers that use MPU9250 as
backend.

2) The configuration of gyro and accel. Once the first part is completed
successfully the AP_InertialSensor_MPU9250 finishes the configuration of
the sensors it uses.

The only change in behavior here is that before we would try 25 time (5x
inside _hardware_init time 5x inside _init_sensor() that calls the first
function) to "boot the chip" and now we are doing "only" 5.
 2015-07-06 10:48:07 +10:00
Lucas De Marchi
953bfbd3fe AP_InertialSensor: provide static methods for spi transactions 
Add static methods to do the SPI transactions and provide the wrapper
methods when we have an instance of the object. This is useful so these
methods can be called from other contexts when the AP_InertialSensor
hasn't been initialized yet.
 2015-07-06 10:48:07 +10:00
Lucas De Marchi
fde43a77b3 AP_HAL_Linux: allow to change spi device state 
Allowing to change the SPI device state allows us to save the
information whether the device was already initialized and avoid 2
separate drivers to initialize it.
 2015-07-06 10:48:06 +10:00
Lucas De Marchi
384d650a23 AP_HAL: allow to have spi device state 2015-07-06 10:48:06 +10:00
Staroselskii Georgii
26c8007c96 AP_Compass: updated backend detect method 
Uses reimplemented AK8963 driver. There's also no need trying to detect this
compass twice. Actually, it might even be bad, because the current code can
allocate an AK8963 object twice.
 2015-07-06 10:48:06 +10:00
Staroselskii Georgii
7a417d1151 AP_Compass: AK8963 rework 
Got rid of extra abstraction layer. There is no need for that now.
 2015-07-06 10:48:06 +10:00
mirkix
f82344358f AP_InertialSensor: Change BBBMINI standard orientation 2015-07-06 10:12:39 +10:00
mirkix
e6363ea95d AP_HAL_Linux: BBBMINI uses /dev/i2c-2 2015-07-06 10:09:21 +10:00
Lucas De Marchi
b211b86204 AP_HAL_Linux: don't manually define number of spi devices 
It's error-prone, let's make the compiler define it for us.
 2015-07-06 10:07:22 +10:00
Lucas De Marchi
82314ee4a3 AP_Common: add helper macro ARRAY_SIZE 2015-07-06 10:07:21 +10:00
Andrew Tridgell
1f58e0080a SITL: fixed some build warnings 2015-07-06 09:21:49 +10:00
Andrew Tridgell
8f41d97548 AP_Math: fixed build error on PX4 
variable set but not used with recent longitude_scale change
 2015-07-06 08:19:57 +10:00
Andrew Tridgell
099392d3ca AP_Math: don't optimise longitude_scale on faster CPUs 
it causes problems with replay
 2015-07-05 17:27:53 +10:00
Andrew Tridgell
88a90495b2 HAL_SITL: allow for more data before GPS pipe flush 2015-07-04 15:14:39 +10:00
Andrew Tridgell
21c895f6f3 AP_GPS: prevent extra NMEA messages causing rapid fix rates 
unexpected messages could cause the GPS driver to report a very high
fix rate, which can confuse the EKF
 2015-07-03 22:08:05 +10:00
Paul Riseborough
4fb7beba4b AP_NAvEKF: Prevent failure due to magnetometer fusion numerical errors 
If a badly conditioned covariance matrix causes negative innovation variances, then the filter will diverge. The previous approach of increasing process noise was not effective in some cases, so a hard reset of the covariance matrix has been adopted to guarantee recovery.
This fixes a numerical error observed using the replay on flight log which had significant periods of compass rejection.
 2015-07-02 18:07:22 +10:00
Randy Mackay
43b1694c76 Compass: add third compass to PRIMARY param description 2015-07-02 14:19:30 +09:00
Peter Barker
844f050cf3 DataFlash: correct zero-byte-file handling in CLI 
-rw-rw-r-- 1 pbarker pbarker   2105344 Jul  1 16:10 1.BIN
-rw-rw-r-- 1 pbarker pbarker         0 Jul  1 19:35 2.BIN
-rw-rw-r-- 1 pbarker pbarker   2494464 Jul  1 16:58 3.BIN
-rw-rw-r-- 1 pbarker pbarker 128503808 Jul  1 20:22 4.BIN
-rw-rw-r-- 1 pbarker pbarker         3 Jul  1 19:46 LASTLOG.TXT

Before fix:

2 logs
Log 3 in logs/3.BIN of size 2494464 2015/7/1 6:58
Log 4 in logs/4.BIN of size 128503808 2015/7/1 10:22

After Fix:

4 logs
Log 1 in logs/1.BIN of size 2105344 2015/7/1 6:10
Log 2 in logs/2.BIN of size 0 2015/7/1 9:35
Log 3 in logs/3.BIN of size 2494464 2015/7/1 6:58
Log 4 in logs/4.BIN of size 128503808 2015/7/1 10:22

If the last file was zero bytes, no files would be shown.
 2015-07-02 08:53:18 +10:00
Andrew Tridgell
5b0394eb05 AP_Compass: start MPU9250 driver at low speed 
this raises the chances of successful init of the MPU9250
 2015-07-02 08:48:06 +10:00
Staroselskii Georgii
d40b45c9ae AP_InertialSensor: disable reset on MPU9250 
The Compass library is initialized before the InertialSensor. AK8963 with
MPU9250 as backend already takes care of resetting MPU9250. The problem with
also resetting it in the MPU9250 initialization code is that if the reset
happens during an internal I2C transaction, the AK8963 may hang. So here we
remove the reset inside MPU9250. There still a possibility that the first
MPU9250 initialization is not successful and it resets the chip, but it's not
happening in tests.
 2015-07-01 20:44:09 +03:00
Andrew Tridgell
5f0302ed9f HAL_Linux: fixed chaining of getopt calls 2015-07-01 20:44:07 +10:00
Andrew Tridgell
355575f793 HAL_Linux: fixed chaining of getopt instances 2015-07-01 15:42:07 +10:00
Andrew Tridgell
c8a6a02be1 HAL_Linux: don't do chardev test on subtype NONE 
otherwise replay is broken
 2015-07-01 15:36:34 +10:00
Andrew Tridgell
0679552cf7 GCS_MAVLink: regenerate headers 2015-07-01 12:02:44 +10:00
Andrew Tridgell
44b7c75a4c GCS_MAVLink: merged upstream mag cal messages for APM 2015-07-01 12:00:23 +10:00
tcr3dr
41e4c2720d AP_Param: Explicitly casts AP_CLASSTYPE parameter. 2015-07-01 11:32:11 +10:00
tcr3dr
9d26bc6958 HAL_SITL: Adds polyfill for feenableexcept on OS X. 2015-07-01 11:32:01 +10:00
tcr3dr
523acc1c54 AP_Menu: Corrects string null comparison in AP_Menu. 2015-07-01 11:31:54 +10:00
Tom Pittenger
457d3be4d7 AP_BoardConfig: add user-defined serial number 
new param: BRD_SERIAL_NUM
// @Description: User-defined serial number of this vehicle, it can be any arbitrary number you want and has no effect on the autopilot
// @Range: -32767 to 32768 (any 16bit signed number)
 2015-06-30 17:20:15 +10:00
Andrew Tridgell
281f6d9caa HAL_Linux: cope with expansion of storage from 4096 to 16k 2015-06-30 16:45:49 +10:00
Gustavo Jose de Sousa
87776d8a4b Storage: define LINUX_STORAGE_SIZE correctly 
The value for LINUX_STORAGE_SIZE was defined inconsistently against the one
defined for Linux boards in HAL_STORAGE_SIZE. That led to some values not
being written to the storage when running the test binary built at
libraries/StorageManager/examples/StorageTest.
 2015-06-30 16:37:08 +10:00
Peter Barker
cabea266e7 DataFlash: pull out common mission logging code 2015-06-30 16:23:35 +10:00
Peter Barker
d85b247706 DataFlash: Log_Write_SysInfo - pull out common logging startup messages 2015-06-30 16:23:34 +10:00
Peter Barker
c5c39a77a3 DataFlash: method to flush ringbuffer to fd 2015-06-30 16:19:22 +10:00
Andrew Tridgell
686b1137fa AP_NavEKF: added vehicle specific initial gyro bias uncertainty 2015-06-30 16:16:26 +10:00
Andrew Tridgell
761b39be03 HAL_Linux: removed extra include 2015-06-30 15:09:52 +10:00
Andrew Tridgell
1296da56bb AP_Terrain: fixed terrain path handling 2015-06-30 15:08:10 +10:00
Andrew Tridgell
a3c7297d8e HAL_Linux: fixed setting of custom directories 2015-06-30 15:08:10 +10:00
Víctor Mayoral Vilches
f592981a60 TerrainIO: Support custom_terrain_directory 2015-06-30 14:36:43 +10:00
Víctor Mayoral Vilches
c06abeb02e DataFlash_File: Support custom_log_directory 2015-06-30 14:36:42 +10:00
Víctor Mayoral Vilches
2e7a4aa1e6 HAL_Linux: Implement custom dir. methods 2015-06-30 14:36:42 +10:00
Víctor Mayoral Vilches
e5a90c7a34 AP_HAL: Util, add custom terrain and log methods 2015-06-30 14:36:00 +10:00
Víctor Mayoral Vilches
5c4ae15deb HAL_Linux: Make use of GetOptLong 
Use GetOptLong to process long args, support
custom terrain and log directories and update
_usage().
 2015-06-30 14:36:00 +10:00
Víctor Mayoral Vilches
309511dc08 HAL_Linux: UARTDriver, const device_path 
Class member set to const and set_device_path
accepts a const char* now.
 2015-06-30 14:36:00 +10:00
Víctor Mayoral Vilches
790f4ec56c HAL_Linux: Util fix indentation 2015-06-30 14:35:59 +10:00
Andrew Tridgell
ac3200fd32 AP_InertialSensor: make max_abs_offsets a single float, not a vector 2015-06-30 10:51:43 +10:00
Gustavo Jose de Sousa
0fcd98c804 AP_InertialSensor: disable debug on LSM9DS0 2015-06-30 10:28:05 +10:00
Gustavo Jose de Sousa
c168e19e73 AP_InertialSensor: fix coding style with uncrustify on LSM9DS0 
This commit makes backend source code for LSM9DS0 comply with the configuration
files "uncrustify_cpp.cfg" and "uncrustify_headers.cfg".
 2015-06-30 10:28:02 +10:00
Gustavo Jose de Sousa
2f2a627002 AP_InertialSensor: use runtime GPIO drdy pins numbers instead C constant macros 
As we intend to eventually get board related parameters from a configuration
file, this commit makes the GPIO numbers for data-ready pins be instance
variables instead of from C constant macros.

Another advantage of using instance variables in this context is the
possibility of using more than one LSM9DS0.
 2015-06-30 10:27:59 +10:00