Mirror/ardupilot
5
0
Fork 0
mirror of https://github.com/ArduPilot/ardupilot synced 2025-01-10 09:58:28 -04:00
Code Issues Packages Projects Releases Wiki Activity

GCS_MAVLink: merged upstream mag cal messages for APM

Browse Source
This commit is contained in:
Andrew Tridgell 2015-07-01 12:00:23 +10:00
parent 41e4c2720d
commit 44b7c75a4c
1 changed files with 72 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

73
libraries/GCS_MAVLink/message_definitions/ardupilotmega.xml
View File

@ -55,6 +55,39 @@
<param index="6">Empty</param>
<param index="7">Empty</param>
</entry>
<entry name="MAV_CMD_DO_START_MAG_CAL" value="42424">
<description>Initiate a magnetometer calibration</description>
<param index="1">uint8_t bitmask of magnetometers (0 means all)</param>
<param index="2">Automatically retry on failure (0=no retry, 1=retry).</param>
<param index="3">Save without user input (0=require input, 1=autosave).</param>
<param index="4">Delay (seconds)</param>
<param index="5">Empty</param>
<param index="6">Empty</param>
<param index="7">Empty</param>
</entry>
<entry name="MAV_CMD_DO_ACCEPT_MAG_CAL" value="42425">
<description>Initiate a magnetometer calibration</description>
<param index="1">uint8_t bitmask of magnetometers (0 means all)</param>
<param index="2">Empty</param>
<param index="3">Empty</param>
<param index="4">Empty</param>
<param index="5">Empty</param>
<param index="6">Empty</param>
<param index="7">Empty</param>
</entry>
<entry name="MAV_CMD_DO_CANCEL_MAG_CAL" value="42426">
<description>Cancel a running magnetometer calibration</description>
<param index="1">uint8_t bitmask of magnetometers (0 means all)</param>
<param index="2">Empty</param>
<param index="3">Empty</param>
<param index="4">Empty</param>
<param index="5">Empty</param>
<param index="6">Empty</param>
<param index="7">Empty</param>
</entry>
</enum>
<!-- AP_Limits Enums -->
@ -280,6 +313,15 @@
<entry name="EKF_PRED_POS_HORIZ_ABS" value="512"> <description>set if EKF's predicted horizontal position (absolute) estimate is good</description></entry>
</enum>
<enum name="MAG_CAL_STATUS">
<entry name="MAG_CAL_NOT_STARTED" value="0"></entry>
<entry name="MAG_CAL_WAITING_TO_START" value="1"></entry>
<entry name="MAG_CAL_RUNNING_STEP_ONE" value="2"></entry>
<entry name="MAG_CAL_RUNNING_STEP_TWO" value="3"></entry>
<entry name="MAG_CAL_SUCCESS" value="4"></entry>
<entry name="MAG_CAL_FAILED" value="5"></entry>
</enum>
<enum name="PID_TUNING_AXIS">
<entry name="PID_TUNING_ROLL" value="1"></entry>
<entry name="PID_TUNING_PITCH" value="2"></entry>
@ -668,7 +710,36 @@
<field type="uint8_t[24]" name="custom_bytes">Custom Bytes</field>
</message>
<!-- 191 to 192 RESERVED for mag calibration -->
<message name="MAG_CAL_PROGRESS" id="191">
<description>Reports progress of compass calibration.</description>
<field type="uint8_t" name="compass_id">Compass being calibrated</field>
<field type="uint8_t" name="cal_mask">Bitmask of compasses being calibrated</field>
<field type="uint8_t" name="cal_status">Status (see MAG_CAL_STATUS enum)</field>
<field type="uint8_t" name="attempt">Attempt number</field>
<field type="uint8_t" name="completion_pct">Completion percentage</field>
<field type="uint8_t[10]" name="completion_mask">Bitmask of sphere sections (see http://en.wikipedia.org/wiki/Geodesic_grid)</field>
<field type="float" name="direction_x">Body frame direction vector for display</field>
<field type="float" name="direction_y">Body frame direction vector for display</field>
<field type="float" name="direction_z">Body frame direction vector for display</field>
</message>
<message name="MAG_CAL_REPORT" id="192">
<description>Reports results of completed compass calibration. Sent until MAG_CAL_ACK received.</description>
<field type="uint8_t" name="compass_id">Compass being calibrated</field>
<field type="uint8_t" name="cal_mask">Bitmask of compasses being calibrated</field>
<field type="uint8_t" name="cal_status">Status (see MAG_CAL_STATUS enum)</field>
<field type="uint8_t" name="autosaved">0=requires a MAV_CMD_DO_ACCEPT_MAG_CAL, 1=saved to parameters</field>
<field type="float" name="fitness">RMS milligauss residuals</field>
<field type="float" name="ofs_x">X offset</field>
<field type="float" name="ofs_y">Y offset</field>
<field type="float" name="ofs_z">Z offset</field>
<field type="float" name="diag_x">X diagonal (matrix 11)</field>
<field type="float" name="diag_y">Y diagonal (matrix 22)</field>
<field type="float" name="diag_z">Z diagonal (matrix 33)</field>
<field type="float" name="offdiag_x">X off-diagonal (matrix 12 and 21)</field>
<field type="float" name="offdiag_y">Y off-diagonal (matrix 13 and 31)</field>
<field type="float" name="offdiag_z">Z off-diagonal (matrix 32 and 23)</field>
</message>
<!-- EKF status message from autopilot to GCS. -->
<message name="EKF_STATUS_REPORT" id="193">