Commit Graph

21166 Commits

Author SHA1 Message Date
Mark Whitehorn eb620f0792 AP_IOMCU: fix IO fast channel mask 2019-10-01 08:32:03 +10:00
Mark Whitehorn 2034bde367 HAL_ChibiOS: fix FMU fast_channel_mask
fix IO fast channel mask
use IOMCU chmask to only set right channels
remove unused variable
2019-10-01 08:32:00 +10:00
Andrew Tridgell 4c22633c60 AP_GPS: fixed a bug in handling corrupt u-blox packets
when we have corrupt input due to loss of bytes on a UART we can end
up with a u-blox packet with zero payload bytes. When that happens we
need to bypass payload reading as otherwise we will end up keeping
reading bytes until the driver resets at 4 seconds, causing a GPS
outage.

This was causing GPS outages every few hours in copters running 3.6.7,
and was also reproduced in SITL using SIM_GPS_BYTELOSS.
2019-10-01 08:31:20 +10:00
Henry Wurzburg 6108c5b5ab AP_OSD: Add autoranging to current and speed displays 2019-09-22 21:11:06 +10:00
Randy Mackay 1433741cc9 AP_Proximity: fix rangefinder backends cm to m conversion 2019-09-22 21:09:38 +10:00
Peter Barker 784edac137 AP_NavEKF2: correct return of empty prearm string 2019-09-22 21:09:11 +10:00
Peter Barker 6693610c7a AP_NavEKF3: correct return of empty prearm string 2019-09-22 21:09:04 +10:00
Andrew Tridgell 2bebe8f916 SITL: added SIM_LOOP_DELAY parameter
this allows us to test high CPU load conditions by adding a delay to
each loop
2019-09-22 21:08:38 +10:00
Andrew Tridgell ae4bcf0f6f AP_Scheduler: cope with high CPU load by stretching loop times
this adds an extra budget of time per loop when we are not achieving
scheduled tasks at a rate of at least 1/8 of the desired rate. This
fixes an issue where a vehicle can become uncontrollable if the user
asks for a SCHED_LOOP_RATE which is not achievable. As these events
happen we add extra loop budget until we are able to run all tasks. We
drop the extra time when the CPU pressure eases.
2019-09-22 21:08:34 +10:00
Andrew Tridgell d916c31575 AP_Logger: added logging of extra loop time from the scheduler 2019-09-22 21:08:27 +10:00
Lucas De Marchi 1eb2dc2b2f AP_RangeFinder: add missing overrides 2019-09-22 21:08:14 +10:00
Lucas De Marchi 575200f8c7 AP_RangeFinder: fix build 2019-09-22 21:08:11 +10:00
Andrew Tridgell 62c3fec45c HAL_ChibiOS: fixes from LGTM errors 2019-09-22 21:07:54 +10:00
Andrew Tridgell f6b28f3013 HAL_ChibiOS: fixed delay for OneShot125 channels
we were delaying output for OneShot125 by 8x as much as we need to,
which reduced our max loop rate
2019-09-22 21:07:49 +10:00
Andrew Tridgell 372eca7dad AP_NavEKF3: fixed use of uninitialised variable in EKF3 mag fusion
not all elements of H_MAG are initialised, but they are used, as found
by valgrind
2019-09-22 21:07:38 +10:00
Andrew Tridgell eeb6fbe5ee HAL_ChibiOS: fixed undef for define lines
this fixes IMU heater enable for CubeBlack+
2019-09-16 12:55:44 +10:00
Andrew Tridgell dceee38d69 HAL_ChibiOS: fixed IMU order and board ID for CubeBlack+ 2019-09-16 12:55:36 +10:00
bugobliterator e540248695 HAL_ChibiOS: hwdef: add hwdef for CubeBlack+ 2019-09-16 12:55:34 +10:00
bugobliterator 8dca2b14db AP_BoardConfig: add support for CubeBlackPlus 2019-09-16 12:55:32 +10:00
Andrew Tridgell f86a7d347d Revert "AP_HAL_SITL: set initial PWM values to a flag value"
This reverts commit 1735563bb7.

This commit broke RC input on high channels with sim_vehicle.py, plane
getc RC failsafe immediately
2019-09-15 18:26:50 +10:00
Peter Barker 6193d6cf69 AP_Compass: fix example by instantiating Baro
Baro is required to get location, and Compass tries to get the declination based on current location
2019-09-13 08:54:21 +09:00
bnsgeyer e91402aeb6 AP_Motors: tradheli-make all RSC params part of library
AP_Motors: Tradheli-fix RSC mode change while armed

AP_Motors: tradheli - improve RSC param metadata

AP_Motors: tradheli-put all throttle param settings in percent
2019-09-13 08:53:54 +09:00
Peter Barker 1735563bb7 AP_HAL_SITL: set initial PWM values to a flag value
These should never be used.  Setting them to a flag value may give a
hint to someone trying to debug a problem in the future.
2019-09-13 08:58:43 +10:00
Peter Barker 8da978b913 GCS_MAVLink: use sending_mavlink1 method in send_rc_channels_raw 2019-09-12 16:10:23 +10:00
Peter Barker 5dad0e5410 AP_HAL: a few more simple tests for snprintf 2019-09-12 16:08:59 +10:00
Andrew Tridgell 28cca004f2 HAL_ChibiOS: added default params for skyviper-journey 2019-09-12 14:02:36 +10:00
Andrew Tridgell 1dca0a16f5 HAL_ChibiOS: rename skyviper-f412 to skyviper-journey 2019-09-12 14:02:36 +10:00
Andrew Tridgell dcbbc86f34 AP_Radio: added support for Skyviper 2018 model radios
fixes #12273
2019-09-12 14:02:36 +10:00
mhefny 375510ecc2 SITL: adding wind simulation in Webots 2019-09-12 13:22:26 +10:00
mhefny bfb7e3af3b SITL: sending wind data to Webots controller 2019-09-12 13:22:26 +10:00
Andrew Tridgell 8bb6a67b36 GCS_MAVLink: refuse set of read-only parameters 2019-09-12 10:50:30 +10:00
Andrew Tridgell 6573857a90 AP_Param: support @READONLY marker in param files
allows for read-only parameters embedded in firmware
2019-09-12 10:50:30 +10:00
Andrew Tridgell 4a6fdc00c9 AP_AdvancedFailsafe: added AFS_MAX_RANGE option
this allows a maximum range since first arm to be set in
AFS_MAX_RANGE. This value (in km) will trigger the configured
termination type if the GPS location shows that it has been breached.

This feature, in combination with the @READONLY apj parameter feature,
is intended to be used to meet regulatory restrictions on a vehicles
maximum range
2019-09-12 09:59:17 +10:00
Andrew Tridgell 6af9d55e70 AP_OSD: fixed vsnprintf return assumption 2019-09-12 08:43:31 +10:00
Andrew Tridgell 98c2606c0a GCS_MAVLink: fixed assumption on return of snprintf 2019-09-12 08:43:31 +10:00
Peter Barker 412bf24b9a AP_HAL: add gtests for snprintf 2019-09-12 07:42:40 +10:00
Andrew Tridgell 54b9524c0b AP_RangeFinder: make LightWare I2C native work with more hw versions
this allows the native i2c lightware driver to work with a wide range
of lidars from LightWare, removing the specific version check, and the
version specific config commands
2019-09-12 07:40:32 +10:00
Andy Piper 8e385d7453 AP_InertialSensor: correct formatting 2019-09-11 18:41:05 +10:00
Leonard Hall 6f3be90147 Filter: Alter Notch filter formula to remove /0 and allow perfect notch.
This formulation of the notch equations lets the user specify the depth of the Notch. The presence of a diveide by A prevents the gain going to zero and therefore achieving a perfect notch. It also provides the risk that a user may attempt to do this and cause a divide by zero error. This change adds the ability to achive a perfect notch and removes the possibility of a divide by zero.

Add Notch Filter parameter checking
2019-09-11 18:41:05 +10:00
Andy Piper 9b9fb0d593 Filter: sanity check the harmonic notch sample rate on initialization. do not allow harmonics to go above the nyquist frequency 2019-09-11 18:41:05 +10:00
Andy Piper 5b7f9f6bea AP_InertialSensor: while sensors are converging update the filters sample rates. if gyro filtering produces invalid output, keep the previous value 2019-09-11 18:41:05 +10:00
Andy Piper bc5916ebc9 Filter: comment on reserved config. cope with notch allocation failure. 2019-09-11 18:41:05 +10:00
Andy Piper a9a7fe3ea5 AP_InertialSensor: ensure harmonic notch gets appropriate defaults 2019-09-11 18:41:05 +10:00
Andy Piper 3261677e01 AP_InertialSensor: remove _ prefix from methods. use changed filter methods. 2019-09-11 18:41:05 +10:00
Andy Piper 334ebadd5a Filter: add comments and address review comments for harmonic notch 2019-09-11 18:41:05 +10:00
Andy Piper 50f7e50634 AP_InertialSensor: add harmonic notch filter to gyro filter chain
Allow dynamic updates to the calculated frequency. Convert bandwidth and frequency to floats.
backend variables do not need to be indexed per-backed
2019-09-11 18:41:05 +10:00
Andy Piper 366bc06089 Filter: New HarmonicNotchFilter
This delegates updates to a bank of NotchFilters located at an rpm frequency and harmonics. Center frequency can be updated dynamically. Notch parameters are configurable, including the number of harmonics to filter on. Updates to the filter parameters are optimized across the notch bank. Convert notch bandwidth and frequency to floats.

allow all filter harmonics to be controlled.

add destructor to harmonic notch.

don't allocate sub-filters for harmonic notch if no harmonics set.
2019-09-11 18:41:05 +10:00
Andrew Tridgell fae2e44eac AP_NavEKF3: reset inhibitMagStates on in-flight yaw reset
this is needed to prevent the next ConstrainVariances() from zeroing
the variances, which leads to very slow learning of mag states
2019-09-11 14:22:18 +10:00
Andrew Tridgell 71ad90819e AP_Compass: don't reset SITL compass offsets if set by user
makes for easier EKF compass bias learning testing
2019-09-11 14:22:18 +10:00
Peter Barker 10675ab5c4 AP_HAL: correct include ordering in srxl.h
The header needs stdint.h which it was only getting because it was
included after stdint.h in the cpp file.

Stop including standard headers before other ArduPilot headers
2019-09-11 14:19:14 +10:00
Andrew Tridgell 4197fdeb2a AP_HAL: fixed bug in vsnprintf()
we need to return the number of bytes that would have been printed if
the buffer was big enough to support use cases such as vasprintf()
which needs to know how many bytes to allocate
2019-09-11 13:41:03 +10:00
Peter Hall 102a231c3f AP_WindVane: rename abs to true wind 2019-09-11 11:22:12 +09:00
Rajat Singhal 5147b607c0 SITL: Correct Airsim params 2019-09-11 08:28:28 +10:00
Randy Mackay 246bfcf4a1 AP_Common: expanding array checks memory before allocating 2019-09-11 06:56:35 +10:00
Peter Barker 15308af230 AP_HAL_SITL: avoid lockstep scheduling issue with semaphores
If there is another thread holding a lock that the main thread wants to
take while pretending to be the IO thread, we will wait forever as we do
not move SITL time forward while pretending to be the IO thread.

This patch simply allows time to move forward if we've failed to take a
semaphore immediately and need to wait.
2019-09-10 21:01:37 +10:00
Andy Piper dde6dec145 AP_InertialSensor: correct reboot documentation for batch logger and filters 2019-09-10 20:29:56 +10:00
Randy Mackay 0e1a2efb7c EKF3: RNG_USE_HGT param only used when ALT_SOURCE = rangefinder 2019-09-10 18:44:52 +10:00
Randy Mackay 94a52b3525 EKF2: RNG_USE_HGT param only used when ALT_SOURCE = rangefinder 2019-09-10 18:44:52 +10:00
Andrew Tridgell b33afde884 HAL_ChibiOS: allow safety button on CUAV_GPS to be used for "stay in bootloader"
allows for recovery of bad CAN firmware
2019-09-10 16:22:33 +10:00
Andrew Tridgell c6a9f067e2 HAL_ChibiOS: enable LEDs on CUAV_GPS 2019-09-10 16:22:33 +10:00
Andrew Tridgell 3dfe15443d HAL_ChibiOS: fixed orientation of CUAV_GPS compass 2019-09-10 16:22:33 +10:00
Andrew Tridgell 21cce1385a AP_UAVCAN: support safety buttons on UAVCAN
the button works in parallel with any button attached by IOMCU or by a
pin, and obeys all the same BRD_SAFETY* options
2019-09-10 16:22:33 +10:00
Andrew Tridgell 03c1a8bfd9 HAL_ChibiOS: use safety button logic from AP_BoardConfig 2019-09-10 16:22:33 +10:00
Andrew Tridgell 5a96e374ba AP_BoardConfig: moved logic for safety button press to AP_BoardConfig
this allows for common code between CAN and pin safety switches, as
well as making the code neater as most of the logic is related to
AP_BoardConfig options
2019-09-10 16:22:33 +10:00
Andrew Tridgell 82a98ef95d AP_Notify: added NTZ_BUZZ_VOLUME parameter
it is fairly non-linear, but does work
2019-09-10 16:22:33 +10:00
Andrew Tridgell 39f4f7c208 AP_UAVCAN: added safety LED and button messages 2019-09-10 16:22:33 +10:00
Andrew Tridgell 0ea67943b9 HAL_ChibiOS: enable safety button on CUAV_GPS 2019-09-10 16:22:33 +10:00
Andrew Tridgell c6c1c4bc31 AP_UAVCAN: support safety LEDs on UAVCAN 2019-09-10 16:22:33 +10:00
Andrew Tridgell 186eedf838 HAL_ChibiOS: enable safety LED 2019-09-10 16:22:33 +10:00
Andrew Tridgell 75696997cc HAL_ChibiOS: added buzzer support to CUAV_GPS 2019-09-10 16:22:33 +10:00
Andrew Tridgell 7c57546eb1 AP_Notify: support UAVCAN buzzers 2019-09-10 16:22:33 +10:00
Andrew Tridgell d55f76c88e AP_UAVCAN: added buzzer support 2019-09-10 16:22:33 +10:00
Peter Barker 8fc55b9678 GCS_MAVLink: remove comm_get_available
available returns an unsigned integer, so this was just weird
2019-09-10 15:45:27 +10:00
Andrew Tridgell cbe0af2463 HAL_ChibiOS: setup for LEDs on KakuteF4
this makes Kopis1 display LEDs properly
2019-09-10 13:03:28 +10:00
Andrew Tridgell a4924e1c0b AP_Notify: allow setting of LED count in hwdef.dat 2019-09-10 13:03:28 +10:00
Andrew Tridgell 28b5f2b021 AP_Notify: simplify NeoPixel driver
use new API to avoid complexities
2019-09-10 13:03:28 +10:00
Andrew Tridgell f441223b55 HAL_ChibiOS: implement updated NeoPixel API
allow for N leds per chain, and setting separate colours per led in
each chain
2019-09-10 13:03:28 +10:00
Andrew Tridgell 1cb608a9f4 AP_HAL: allow neopixel LEDs to be set more flexibly
allow for N leds per chain, with RGB control of each
2019-09-10 13:03:28 +10:00
Tom Pittenger aa602b5e1b AP_Notify: add NeoPixel driver 2019-09-10 13:03:28 +10:00
Tom Pittenger e3416b66dc AP_HAL_ChibiOS: add Neopixel output type, similar to dshot 2019-09-10 13:03:28 +10:00
Tom Pittenger 52be3903c0 SRV_Channel: add neopixel as an output type 2019-09-10 13:03:28 +10:00
Randy Mackay aba4a1fdc8 AC_Avoidance: remove OADatabase check that can never be true 2019-09-10 09:15:56 +10:00
Randy Mackay 0dd8525c99 AP_HAL_SITL: resolve compiler warning in sitl_airspeed by using fabsf 2019-09-10 09:15:56 +10:00
Randy Mackay 2d128e0079 AP_Proximity: remove unused var from AriSimSITL 2019-09-10 09:15:56 +10:00
Randy Mackay d4b047fc1f SITL: Gripper_EPM compiler warning resolved by using float and fabsf 2019-09-10 09:15:56 +10:00
Randy Mackay 1fd7618238 SITL: remove unused time_diff member 2019-09-10 09:15:56 +10:00
Michael du Breuil 9a7d64e8fc AP_NavEKF3: Allow the GPS to be responsible for logging 2019-09-10 09:09:17 +10:00
Michael du Breuil a4d10b2e86 AP_NavEKF2: Allow the GPS to be responsible for logging 2019-09-10 09:09:17 +10:00
Michael du Breuil f857eb4640 AP_GPS: Take responsibility for logging the GPS if the EKF wants logging 2019-09-10 09:09:17 +10:00
Willian Galvani b92473111c AP_LeakDetector: Mark Leak pins RebootRequired 2019-09-09 09:53:28 -07:00
Andy Piper 6f3334b460 AP_Filesystem: build fixes for SITL on macOS 2019-09-09 20:18:00 +10:00
Andrew Tridgell 91e8752c17 HAL_ChibiOS: wrap more libc functions
this saves a few k of flash as it avoids linking libc versions of some
functions
2019-09-09 13:31:30 +10:00
Andrew Tridgell 3166f84954 HAL_ChibiOS: added vsnprintf wrapper
this allows us to use a common snprintf implementation
2019-09-09 13:31:30 +10:00
Michael du Breuil ba3cfbfb54 AP_RTC: Don't allow RTC times before 2019 2019-09-09 04:43:29 +10:00
Andrew Tridgell aa20be4270 AP_RCProtocol: fixed SUMD with 16 channels
with 16 channels it is more than 3ms per frame
2019-09-07 10:02:26 +10:00
Andrew Tridgell df387dc396 AP_Compass: allow rotation of BMM150 compass 2019-09-07 09:53:21 +10:00
Andrew Tridgell 1cb775e2c2 AP_Compass: probe more addresses for IST8310
IST8310 can be on 4 possible i2c addresses
2019-09-07 07:35:54 +10:00
Andrew Tridgell 5e5c30efe8 HAL_SITL: allow SITL to use SERIALn_PROTOCOL=23
this allows for testing of RC input protocol parsing in SITL
2019-09-06 08:51:45 +10:00
Andrew Tridgell c8de2ec9c7 AP_RCProtocol: added update() method for use by SITL 2019-09-06 08:51:45 +10:00
Andrew Tridgell 4b48e80c26 AP_SerialManager: fixed AP_Periph build 2019-09-06 08:51:45 +10:00
Andrew Tridgell 83872c23e5 HAL_ChibiOS: fixed AP_Periph build 2019-09-06 08:51:45 +10:00
Andrew Tridgell fd80220d3e HAL_ChibiOS: setup PH4-mini RCIN port by default 2019-09-06 08:51:45 +10:00
Andrew Tridgell 54649a0e4f HAL_ChibiOS: fixed KakuteF4 define for SERIAL2 2019-09-06 08:51:45 +10:00
Andrew Tridgell 06b272705e HAL_ChibiOS: run RCIN thread at 1kHz
this gives fast enough response for SBUS parsing on a UART
2019-09-06 08:51:45 +10:00
Andrew Tridgell 6983186210 AP_HAL: added get_options() method on UARTs 2019-09-06 08:51:45 +10:00
Andrew Tridgell c841b39ea2 HAL_ChibiOS: switch to AP::RC() for AP_RCProtocol 2019-09-06 08:51:45 +10:00
Andrew Tridgell bf2cf7834d HAL_ChibiOS: fixed a bug in parity/stop-bit setting on STM32F7 and H7
and add get_options() method
2019-09-06 08:51:45 +10:00
Andrew Tridgell 312018898f HAL_Linux: use AP::RC() 2019-09-06 08:51:45 +10:00
Andrew Tridgell 672d09c965 AP_IOMCU: use AP::RC() for AP_RCProtocol 2019-09-06 08:51:45 +10:00
Andrew Tridgell cbdb23afb5 AP_SerialManager: support SERIALn_PROTOCOL=23 for RC input
sets up an extra RC input port
2019-09-06 08:51:45 +10:00
Andrew Tridgell 2b856abdd1 AP_RCProtocol: support an additional uart on RC input
this will allow for any UART to be configured as an additional RC
input source
2019-09-06 08:51:45 +10:00
Andrew Tridgell ad2890dc5a HAL_ChibiOS: added connector pinouts for PH4-mini 2019-09-06 08:51:45 +10:00
Andrew Tridgell b72dcf6478 AP_Filesystem: use a recursive semaphore
this is needed to cope with the mkdir("/APM") in sdcard_retry()
2019-09-06 08:51:04 +10:00
Andrew Tridgell 7afd51d03e AP_Frsky_Telem: move FrSky handling to it's own thread
we are getting timing issues sharing with the other users of the IO
thread. The FrSky protocols are quite timing sensitive, so this should
help
2019-09-05 10:50:17 +10:00
Randy Mackay fb38db6640 AP_AHRS: resolve compile warning in AP_AHRS_DCM::use_compass 2019-09-05 08:39:10 +10:00
Andrew Tridgell b344946300 HAL_ChibiOS: prevent duplicate sensors in hwdef.dat
throw an error on configure if there is a duplicate
2019-09-05 06:37:35 +10:00
Andrew Tridgell 2c5c8106a5 HAL_ChibiOS: removed duplicate barometer from fmuv5 2019-09-04 21:24:01 +10:00
Peter Barker df5921a87c GCS_MAVLink: gate AP_DEVO_Telem behind !HAL_MINIMIZE_FEATURES 2019-09-04 17:47:33 +10:00
Andrew Tridgell 708ee47c03 HAL_ChibiOS: fixed f103 rm3100 2019-09-04 16:27:47 +10:00
Andrew Tridgell c2c8702329 HAL_ChibiOS: convert remaining boards to use COMPASS specifier 2019-09-04 16:27:47 +10:00
Andrew Tridgell 3aa01448ff HAL_ChibiOS: use COMPASS specifier for f103-periph 2019-09-04 16:27:47 +10:00
Andrew Tridgell f18a18c0ee AP_Baro: use GET_I2C_DEVICE() for i2c probes
for consistency with compass and INS
2019-09-04 16:27:47 +10:00
Andrew Tridgell 2bc7db4cca AP_HAL: removed old HAL_COMPASS_ defines (no longer used) 2019-09-04 16:27:47 +10:00
Andrew Tridgell bd0760f9d4 AP_Compass: removed unusued compass probes
now only use probe lists
2019-09-04 16:27:47 +10:00
Andrew Tridgell 43e011c7a8 AP_HAL: convert Linux compass specification to new probe list
this avoids the special handling in AP_Compass library
2019-09-04 16:27:47 +10:00
Andrew Tridgell 3bc8522b54 AP_Compass: added ROTATION_NONE to probes
we no longer use defaults in the headers
2019-09-04 16:27:47 +10:00
Andrew Tridgell f877def909 AP_Compass: removed default rotations for compass probe
this prevents bugs where the force_external and rotation are mixed up
in hwdef.dat causing incorrect rotations
2019-09-04 16:27:47 +10:00
Andrew Tridgell 2a48241ebb AP_Compass: fixed naming of QMC5883L driver
needed for probe using COMPASS macro in hwdef.dat
2019-09-04 16:27:47 +10:00
Andrew Tridgell 316e7cf7e6 HAL_ChibiOS: fixed mini-pix compass and baro probing
removed dup baro and fixed compass probe
2019-09-04 16:27:47 +10:00
Andrew Tridgell 2509b50852 AP_Baro: define GET_I2C_DEVICE() 2019-09-04 16:27:47 +10:00
Andrew Tridgell 15e15e0b9d AP_InertialSensor: define GET_I2C_DEVICE() 2019-09-04 16:27:47 +10:00
Andrew Tridgell beca17c638 HAL_ChibiOS: use GET_I2C_DEVICE() for i2c probing
this allows for the driver probing to use a macro to prevent loading
of duplicate i2c devices (AP_Compass does this)
2019-09-04 16:27:47 +10:00
Michael du Breuil e19f0ef238 AP_HAL_ChibiOS: Remove set_stop_pin from AnalogSource 2019-09-04 09:54:50 +10:00
Michael du Breuil 75b241622f AP_HAL_Empty: Remove set_stop_pin from AnalogSource 2019-09-04 09:54:50 +10:00
Michael du Breuil 979a431e4a AP_HAL_Linux: Remove set_stop_pin from AnalogSource 2019-09-04 09:54:50 +10:00
Michael du Breuil 69d3e97533 AP_HAL_SITL: Remove set_stop_pin from AnalogSource 2019-09-04 09:54:50 +10:00
Michael du Breuil c12652b325 AP_Rangefinder: Remove stop pin usage 2019-09-04 09:54:50 +10:00
Michael du Breuil 927a0521e3 AP_HAL: Remove the empty force_safety_no_wait 2019-09-04 07:14:50 +10:00
Michael du Breuil e5eeb6181d GCS_MAVLink: Remove the usage of force_safety_no_wait 2019-09-04 07:14:50 +10:00
Michael du Breuil 5711c2cbac AP_UAVCAN: Remove the usage of force_safety_no_wait 2019-09-04 07:14:50 +10:00
Michael du Breuil 53860b53ac AP_BoardConfig: Remove the usage of force_safety_no_wait 2019-09-04 07:14:50 +10:00
Michael du Breuil a74f00d045 GCS_MAVLink: Remove single use method 2019-09-03 14:35:17 +10:00
Michael du Breuil 8adc6ba3ad AP_Notify: Add an alternate LED scheme 2019-09-03 11:50:52 +10:00
E Thomas c09d6908ed Enabled active buzzer output on OmnibusNanoV6 2019-09-03 09:59:53 +10:00
Peter Barker 7ea449076f AP_NavEKF3: use timing logging from AP_NavEKF 2019-09-03 09:28:37 +10:00
Peter Barker c8fac758ee AP_NavEKF2: use timing logging from AP_NavEKF 2019-09-03 09:28:37 +10:00
Peter Barker 6d71ef5cf8 AP_Logger: move EKF timing logging out to EKF 2019-09-03 09:28:37 +10:00
Peter Barker 9e0f525f69 AP_NavEKF: move logging in from AP_Logger 2019-09-03 09:28:37 +10:00
Peter Barker 9da0efaaef GCS_MAVLink: fill SYS_STATUS bits from AC_Fence 2019-09-03 09:12:24 +10:00
Andrew Tridgell 9c900c7176 AP_RangeFinder: added driver for Lanbao CM8JL65 2019-09-03 09:10:48 +10:00
Peter Hall 2f3c0447eb RC_Channel: add fence and value for rover 2019-09-02 11:03:27 +09:00
Andrew Tridgell 172c802ffa AP_RangeFinder: support native I2C protocol on LightWare Lidars
this supports both the native and the legacy I2C protocol for
LightWare Lidars. The native protocol is a string based protocol that
is enabled by default on new Lidars. By supporting both protocols we
avoid the need for users to re-configure their new lidar using a
serial cable before using it on I2C.

This driver was originally written by Mitch Koch and Jonathan
Challinger, and ported to master by me (it required only minor
changes)
2019-09-02 07:20:22 +10:00
Peter Hall fdb6da0793 RC_Channel: define sailboat mainsail and motor input channels
The unusual use of 207 is in preparation for Peter Barker's RCMAP replacement PR which uses 200 to 206
2019-09-01 09:11:25 +09:00
Peter Hall 3dd0ebaf0d AP_WindVane: add wind_speed_enabled method 2019-09-01 09:11:25 +09:00
Peter Barker ca5ee2bfbc AP_Param: correct fetching of flags for parameters
This was sending through the flags for the group the parameter was in,
rather than the parameter itself.
2019-08-30 06:57:30 +10:00
Andrew Tridgell bcb139f02f AP_Compass: fixed uninitialised CAN device ID bits 2019-08-29 18:37:03 +10:00
Rajat Singhal 80bbadf9ca SITL: AirSim: Store last timestamp only
Also change the datatype of deltat
2019-08-29 08:32:19 +10:00
Rajat Singhal 86a70e5797 SITL: Remove redundant timestep in Airsim backend 2019-08-29 08:32:19 +10:00
Rajat Singhal c056548f0d SITL: Enable Arming Checks in airsim-copter params 2019-08-29 08:32:19 +10:00
Michael du Breuil fa6e43be77 AP_Logger: Forward declare AHRS
This reduces the number of places this is implicitly included, and helps
to reduce the scope of files that get rebuilt
2019-08-28 13:13:03 +10:00
Michael du Breuil fe279b03b6 SITL: Directly include needed headers 2019-08-28 13:13:03 +10:00
Michael du Breuil c85c9faa6d GCS_MAVLink: Directly include needed headers 2019-08-28 13:13:03 +10:00
Michael du Breuil 1a5627ae54 AP_VisualOdom: Directly include needed headers 2019-08-28 13:13:03 +10:00
Michael du Breuil 04863f858d AP_Terrain: Directly include needed headers 2019-08-28 13:13:03 +10:00
Michael du Breuil 17cec7cf2b AP_Landing: Directly include needed headers 2019-08-28 13:13:03 +10:00
Michael du Breuil ca0dad9a7f AP_GPS: Directly include needed headers 2019-08-28 13:13:03 +10:00
Michael du Breuil 5d888abfec AP_Baro: Directly include needed headers 2019-08-28 13:13:03 +10:00
Michael du Breuil d8bce8295e AP_Arming: Directly include needed headers 2019-08-28 13:13:03 +10:00
Peter Barker 78af091869 AP_Logger: log parameter space used as part of log open 2019-08-28 11:51:09 +10:00
Peter Barker b493805fb4 AP_Param: methods to provide amount of parameter space used
AP_Param: provide method for storage size
2019-08-28 11:51:09 +10:00
Peter Barker 2d1357b44c AP_Mount: stop passing serial manager through to init() 2019-08-28 06:55:28 +10:00
Andrew Tridgell 6cecf15e6a AP_Baro: remove unused baro probe lines 2019-08-28 06:54:11 +10:00
Andrew Tridgell 7fa6eeaaed AP_HAL: remove unused HAL_BARO_ defines 2019-08-28 06:54:11 +10:00
Andrew Tridgell 9d94598235 AP_HAL: convert linux boards to use baro probe list 2019-08-28 06:54:11 +10:00
Andrew Tridgell 72494788f7 HAL_ChibiOS: convert more boards to use BARO specifier 2019-08-28 06:54:11 +10:00
Andrew Tridgell 60a6f1b04a AP_HAL: removed most HAL_INS_* defines
not used any more
2019-08-28 06:54:11 +10:00
Andrew Tridgell 1c92ecc89f AP_InertialSensor: removed old method of specifying most IMUs
and removed dangerous default values for rotations
2019-08-28 06:54:11 +10:00
Andrew Tridgell 0667747506 HAL_ChibiOS: convert some more boards to new IMU specifiers 2019-08-28 06:54:11 +10:00
Andrew Tridgell 96180018fb AP_HAL: convert HAL_Linux to use HAL_INS_PROBE_LIST
makes for much simpler addition of new boards, especially with more
than one IMU
2019-08-28 06:54:11 +10:00
Jaaaky d7abd636ac AP_HAL_SITL: Fix build with --sitl-flash-storage option 2019-08-28 06:23:04 +10:00
Andrew Tridgell dcd9003831 Revert "AP_Mission: Better AUTO watchdog restore"
This reverts commit d774bf3ea5.
2019-08-27 13:18:12 -06:00
Andrew Tridgell 5ce4ff916e HAL_ChibiOS: fixed Pixhawk1 gyro orientation
this was broken by the recent switch to hwdef.dat for orientations
2019-08-27 19:29:37 +10:00
Andrew Tridgell c99923d500 AP_InertialSensor: require gyro orientations in LSM9DS probe
this prevents a bug where they are missing in hwdef.dat
2019-08-27 19:29:37 +10:00
Andrew Tridgell d40835c666 AP_Logger: use AP::FS().set_mtime() 2019-08-27 15:40:43 +10:00
Andrew Tridgell b489e8a655 AP_Filesystem: added set_mtime() call 2019-08-27 15:40:43 +10:00
Andrew Tridgell 0ffe2e75be HAL_ChibiOS: fixed warnings 2019-08-27 15:40:43 +10:00
Andrew Tridgell df4cb00970 AP_Logger: added LOG_FILE_TIMEOUT parameter
this allows for cards to be removed and re-inserted while continuing
logging
2019-08-27 15:40:43 +10:00
Andrew Tridgell b577787f68 AP_Scripting: use AP_Filesystem API 2019-08-27 15:40:43 +10:00
Andrew Tridgell 667b4e045a AP_Logger: convert to use AP_Filesystem 2019-08-27 15:40:43 +10:00
Andrew Tridgell fb50ec2a1d AP_Notify: convert to use AP_Filesystem 2019-08-27 15:40:43 +10:00
Andrew Tridgell d160f14856 AP_UAVCAN: convert to use AP_Filesystem 2019-08-27 15:40:43 +10:00
Andrew Tridgell a4860afd32 AP_Terrain: convert to use AP_Filesystem 2019-08-27 15:40:43 +10:00
Andrew Tridgell a4258639c8 AP_Proximity: use strtol instead of sscanf 2019-08-27 15:40:43 +10:00
Andrew Tridgell 9d760a2956 HAL_ChibiOS: disable re-entrancy in FATFS
not needed now we have a semaphore in AP_Filesystem
2019-08-27 15:40:43 +10:00
Andrew Tridgell bf79b65e07 HAL_ChibiOS: simplify stubs code 2019-08-27 15:40:43 +10:00
Andrew Tridgell d1565a96c5 HAL_ChibiOS: wrap cacheBuffer functions
needed to avoid problem with end() method in UARTDriver shadowing with
F7 implementation of cache macros
2019-08-27 15:40:43 +10:00
Andrew Tridgell b867ef35c0 HAL_ChibiOS: use AP_Filesystem API 2019-08-27 15:40:43 +10:00
Andrew Tridgell 692abb11fa AP_Filesystem: define new filesystem API 2019-08-27 15:40:43 +10:00
Michael du Breuil 7fdc9fef12 AP_Scripting: Garbage collect after each run of a script
For some reason this resolves a memory leak in a tight loop of file
open, close. This also extends the memory debug printing to be a bit
more useful.
2019-08-27 13:54:54 +10:00
Michael du Breuil 1484a12f4b AP_HAL_Linux: Fix bad check order on heap_realloc 2019-08-27 13:54:54 +10:00
Michael du Breuil 2d40250f9b AP_HAL_SITL: Fix bad check order on heap_realloc 2019-08-27 13:54:54 +10:00
Andrew Tridgell b30f3697d2 HAL_ChibiOS: fixed build without ISR limit 2019-08-27 10:29:56 +10:00
Andrew Tridgell 97c56c068e HAL_ChibiOS: update board IDs for AP_Periph firmwares 2019-08-27 10:29:56 +10:00
Andrew Tridgell 63f39c2bd6 HAL_ChibiOS: fixed build of iomcu firmware 2019-08-27 10:29:56 +10:00
Andrew Tridgell 444af9e638 AP_BoardConfig: fixed AP_Periph build error 2019-08-27 10:29:56 +10:00
Andrew Tridgell e8e18959f7 AP_Baro: fixed baro build with AP_Periph
no GCS available
2019-08-27 10:29:56 +10:00
Andrew Tridgell a19e55e83c AP_Baro: added BMP388 driver 2019-08-27 10:29:56 +10:00
Andrew Tridgell 64921b64f5 HAL_ChibiOS: enable sensors in peripheral firmwares 2019-08-27 10:29:56 +10:00
Andrew Tridgell fa76d1fbe6 HAL_ChibiOS: disable watchdog save in bootloader 2019-08-27 10:29:56 +10:00
Andrew Tridgell 5cbe85ee19 HAL_ChibiOS: allow for ADC and clock overrides 2019-08-27 10:29:56 +10:00
Andrew Tridgell dc89d10ccf HAL_ChibiOS: added hwdef.dat for CUAV_GPS 2019-08-27 10:29:56 +10:00
Andrew Tridgell c8806acaf5 HAL_ChibiOS: use AP_PERIPH env var 2019-08-27 10:29:56 +10:00
Andrew Tridgell cbc83d68cd HAL_ChibiOS: allow for CAN enable override on F4 2019-08-27 10:29:56 +10:00
Andrew Tridgell fb68fa8bc9 HAL_ChibiOS: fixed typo for 512k F4 parts 2019-08-27 10:29:56 +10:00
Andrew Tridgell e51a1a88df HAL_ChibiOS: initial hwdef-bl.dat for CUAV CAN GPS 2019-08-27 10:29:56 +10:00
Andrew Tridgell 66ab585a24 HAL_ChibiOS: setup defaults for CAN app versions 2019-08-27 10:29:56 +10:00
Andrew Tridgell d711bed405 HAL_ChibiOS: set default node ID of 117
this allows for flight controllers without DNA support
2019-08-27 10:29:56 +10:00
Andrew Tridgell ababe1e81d HAL_ChibiOS: disable UART support in f103-periph bootloader 2019-08-27 10:29:56 +10:00
Andrew Tridgell 2facfe0baa HAL_ChibiOS: support empty UART_ORDER
for CAN bootloader without uart support
2019-08-27 10:29:56 +10:00
Andrew Tridgell f4576ec8f3 AP_Compass: reduce firmware size for AP_Periph 2019-08-27 10:29:56 +10:00
Andrew Tridgell 0ec3f80bbe AP_Compass: enable LIS3MDL on I2C and RM3100 on SPI 2019-08-27 10:29:56 +10:00
Andrew Tridgell 9a7b52fd15 HAL_ChibiOS: added hwdef.dat for f103-periph 2019-08-27 10:29:56 +10:00
Andrew Tridgell 16bdaaa1af HAL_ChibiOS: added support for STM31F10x for AP_Periph 2019-08-27 10:29:56 +10:00
Andrew Tridgell 24e05e96e7 AP_HAL: define support for LIS3MDL_I2C and RM3100_SPI 2019-08-27 10:29:56 +10:00
Andrew Tridgell 01472aa795 AP_FlashStorage: added support for STM32F1xx 2019-08-27 10:29:56 +10:00
Andrew Tridgell 291d72601b AP_GPS: enabled reduced size for AP_Periph support 2019-08-27 10:29:56 +10:00
Andrew Tridgell f897eae89d AP_Param: enable reduced size support for AP_Periph 2019-08-27 10:29:56 +10:00
Andrew Tridgell 88fbbfba09 AP_Vehicle: added AP_Periph vehicle type 2019-08-27 10:29:56 +10:00
Andrew Tridgell d005f066a9 StorageManager: enable use of a single storage region 2019-08-27 10:29:56 +10:00
Michael du Breuil 1e66457755 AP_Scripting: Allow the bindings to descirbe any build dependencies needed
Scripting has a hard requirement on AP_Terrain being available, this
allows us to emit a cleaner error message if you have disabled terrain
but not scripting
2019-08-27 09:45:35 +10:00
Peter Barker 5d9b332bcb GCS_MAVLink: log exectuted COMMAND_LONG and COMMAND_INT packets 2019-08-27 09:32:00 +10:00
Peter Barker 631725f817 AP_Logger: add Write_Command for writing out received mavlink commands 2019-08-27 09:32:00 +10:00
Peter Barker 5010de9560 AP_Notify: add static asserts for array size
We index into these arrays so ensuring their size is worthwhile
2019-08-27 09:29:11 +10:00
Michael du Breuil ee3fcf49c6 AP_BattMonitor: Detect bad configuration of failsafes 2019-08-26 18:57:59 +01:00
Michael du Breuil e47f97c5d3 AP_HAL: Fix bad buffer termination 2019-08-26 18:57:59 +01:00
Stone white ec911710c9 hwdef: Enable Spektrum 3.3V VDD Power on fmuv5 2019-08-26 17:27:02 +10:00
Michael du Breuil 56e35e0712 AP_HAL_ChibiOS: Remove almost redundant code duplication from the HAL 2019-08-26 17:24:09 +10:00
Andrew Tridgell 66dc36ef88 AP_Logger: ifdef out _need_rtc_update 2019-08-26 15:41:44 +10:00
Andrew Tridgell 4418495c99 AP_Logger: use UNUSED_RESULT
Co-Authored-By: Francisco Ferreira <OXINARF@users.noreply.github.com>
2019-08-26 15:41:44 +10:00
Andrew Tridgell 8e58cb993d AP_Logger: fix timestamp on log files opened before GPS lock 2019-08-26 15:41:44 +10:00
Andrew Tridgell ffe0f338d3 HAL_ChibiOS: enable utime() API 2019-08-26 15:41:44 +10:00
murata 1a8e644437 AP_Logger: GPA/GPA2 Change the unit of DELTA. 2019-08-26 14:22:47 +10:00
Andrew Tridgell 4ca48f225d SITL: send vicon data at 70ms intervals
this matches the max rate that EK2 will accept this data
2019-08-26 12:27:31 +10:00
Andrew Tridgell cfc37f2089 GCS_MAVLink: log corrected timestamp for vision data
this allows for debugging of link lag issues
2019-08-26 12:27:31 +10:00
Andrew Tridgell 414d3eb670 AP_NavEKF2: don't fuse GPS when EK2_GPS_TYPE=3
when using a vision position system, the user may have vision derived
GPS data coming in using GPS_INPUT msgs. We should not fuse these when
EK2_GPS_TYPE=3 as we end up fusing both vision data and GPS data,
which does not work with the current EK2 code

This change makes it possible to run EK2 and EK3 in parallel in a
Vicon, wityh EK2 using VISION_POSITION_ESTIMATE data and EK3 using
GPS_INPUT (with yaw) data.
2019-08-26 12:27:31 +10:00
Jaaaky fee3136b44 AP_Baro: Fix floating point exception with watchdog reset
Fixes #12132
2019-08-26 12:24:21 +10:00
Henry Wurzburg 00c111651a ChiBios: Omnibusf4pro hwdef tweak to allow active or passive buzzer 2019-08-26 12:22:53 +10:00
Andrew Tridgell aeb58cede1 HAL_ChibiOS: I2C timeout should be send+recv, not MAX(send,recv)
MAX() is right for SPI, not I2C
2019-08-26 09:13:39 +10:00
Andrew Tridgell 4027d61e17 AP_Scheduler: log I2C ISR count 2019-08-26 09:13:39 +10:00
Andrew Tridgell 7d5c0e92ae AP_Logger: added logging of I2C ISR count 2019-08-26 09:13:39 +10:00