Peter Barker
1aa75e4c3e
Plane: use camera singleton to get camera rather than callback
2018-08-31 15:48:56 +10:00
Peter Barker
558158c62a
Plane: GCS_MAVLink uses compass singleton, stop implementing get_compass
2018-08-31 15:48:56 +10:00
Andrew Tridgell
066c26e445
Plane: updated 3.9.1 release notes
2018-08-31 12:35:59 +10:00
Michael du Breuil
3098744777
Plane: Fix a stale rudder input that was left from rebase
2018-08-28 10:44:17 +10:00
Michael du Breuil
8417bcc7d5
Plane: Add flight options bitmask
2018-08-28 09:40:53 +10:00
Andrew Tridgell
d1f419b530
Plane: updated release notes for 3.9.1beta3
2018-08-23 13:30:14 +10:00
Michael du Breuil
e4bbcd5ee3
Plane: Don't initilize motors with a trim value
2018-08-23 13:19:08 +10:00
Andrew Tridgell
d9b72f6821
Plane: reset rudder input during RC failsafe
2018-08-23 12:55:11 +10:00
Michael du Breuil
9ed5184d98
Plane: Remove unneeded ServoRelayEvent mask set
2018-08-20 21:31:06 -07:00
Michael du Breuil
fa1ad09a3b
Plane: Remove unneeded rudder set
2018-08-21 08:32:56 +10:00
Andrew Tridgell
b11552e945
Plane: update release notes for 3.9.1beta2
...
# Conflicts:
# ArduPlane/release-notes.txt
2018-08-17 20:43:02 +10:00
Alexander Malishev
001948d40c
Plane: publish navigation info to OSD
2018-08-16 10:26:34 +10:00
Michael du Breuil
c8cb5b9e0f
Plane: Log target airspeed to NTUN messages
2018-08-09 11:53:05 +10:00
Michael du Breuil
3d923d0572
Plane: Send a quadplane version of NAV_CONTROLLER_OUTPUT
2018-08-07 09:49:01 +10:00
Randy Mackay
903d00c4b2
Plane: remove compass accumulate
2018-08-06 11:05:34 +10:00
Andrew Tridgell
690bbcdaad
Plane: release notes for 3.9.0
2018-08-06 10:44:29 +10:00
Andrew Tridgell
c964a393c0
Plane: fixed RC_Channels parameter docs
2018-08-04 12:28:38 +10:00
Peter Barker
9ce02bc504
Plane: minimal support for inheritting from RC_Channel
2018-08-01 12:11:30 +09:00
Michael du Breuil
eea8267704
Plane: Update notify initilization
2018-08-01 09:22:09 +10:00
Andrew Tridgell
4f2508d89f
Plane: updated release notes for 3.9.0beta6
2018-07-30 18:18:53 +10:00
Andrew Tridgell
1d675390ab
Plane: make soaring an optional build feature
...
this disables soaring on px4-v2, saving 5k of flash
This is needed to consider pr #9042 , which takes a lot of flash space
2018-07-30 13:09:15 +10:00
Andrew Tridgell
16c7ab81dc
Plane: pass rc_speed to motor backend constructors
...
this sets the right speed as early as possible
2018-07-28 15:25:57 +10:00
Andrew Tridgell
a4d3b08d87
Plane: release notes for 3.9.0beta5
2018-07-19 12:42:27 +10:00
IamPete1
20c67019b0
Plane: added Q_TAILSIT_THSCMX
...
this provides more flexibility in tailsitter throttle scaling
2018-07-19 09:48:25 +10:00
Andrew Tridgell
149a6af48f
Plane: releases notes for plane 3.9.0beta4
2018-07-18 20:45:02 +10:00
Andrew Tridgell
07187f7797
Plane: fixed ARMING_REQUIRE=2 for dual-motor planes
...
many thanks to Marco for finding this bug!
2018-07-18 19:58:02 +10:00
Michael du Breuil
f25726fbb1
Plane: Remove unused ADC include
2018-07-17 09:29:50 +10:00
Andrew Tridgell
ad55605605
Plane: update version to 3.10.0-dev
2018-07-06 11:01:05 +10:00
Andrew Tridgell
db1f1a42d6
Plane: updated 3.9.0beta2 release notes
2018-07-06 10:59:55 +10:00
Peter Barker
94ad85a67d
Plane: handle MAV_CMD_ACCELCAL_VEHICLE_POS in GCS base class
2018-07-06 09:43:09 +10:00
Peter Barker
d077723028
Plane: handle command_int in GCS base class
2018-07-06 09:43:09 +10:00
Peter Barker
d76e7d210b
Plane: handle command_long in GCS base class
2018-07-06 09:43:09 +10:00
Andrew Tridgell
1d91f18177
Plane: fixed version for enums
2018-07-05 11:10:31 +10:00
Andrew Tridgell
bd4515947a
Plane: updated release notes
2018-07-05 11:10:27 +10:00
Peter Barker
85f339caae
Plane: remove annoying ice_update shim
2018-07-04 21:08:47 +01:00
Peter Barker
e404562544
Plane: remove vexing button_update shim
2018-07-04 21:08:47 +01:00
Peter Barker
c42fb6d797
Plane: remove pointless rangefinder_init shim function
2018-07-04 21:08:47 +01:00
Peter Barker
4502fd21c3
Plane: use compass singleton for logging
2018-07-04 20:11:27 +01:00
Peter Barker
3bfa4c8678
Plane: use singletons in AP_Arming
2018-07-03 13:44:11 +10:00
Peter Barker
320e24af65
Plane: move mavlink reboot code up to base class
2018-07-03 12:12:25 +10:00
Jacob Walser
4eb00ac779
Plane: refactor output_test -> output_test_seq
2018-07-02 11:31:58 -04:00
Lucas De Marchi
1a45aa12f5
AP_Param: warn on last pass only about unknown parameters
...
Do not warn about unknown parameters on the first pass, i.e. when
AP_Param:load_all() is called. This is because we may still not know
about dynamically loaded parameters. When we call the second (last)
time, we expect to already know all possible parameters, so print a
warning to both console and the debug terminal.
2018-06-28 10:18:19 -07:00
Lucas De Marchi
7f0d5ddf21
AP_Param: stop panic()'ing on unknown parameters
...
Our track record on keeping parameters up to date with master is not
great and panic()'ing when loading them apparently is not helping
because every and each vehicle has a different file.
On aerofc load_defaults_file() is used in the same way as
load_embedded_param_defaults() is in which the panic() behavior has been
previously removed.
This finishes the removal of the panic param and add warnings to the
debug console when reading the parameters (rather than when counting
them).
2018-06-28 10:18:19 -07:00
Andrew Tridgell
bc503cc600
Plane: moved OSD to top level params
...
this is to give lots of depth for OSD params (which will be very
complex)
2018-06-27 14:55:00 +10:00
Alexander Malishev
75bf6984f5
Plane: added OSD support
2018-06-27 14:55:00 +10:00
Michael du Breuil
1c276e6af7
Plane: Remove unneeded wrapper functions
...
Also removes unneeded battery failsafe flag clearing
2018-06-27 11:39:35 +10:00
Peter Barker
23919daf11
Plane: use arming check_failed function
2018-06-23 15:33:19 +10:00
Andrew Tridgell
d454bc555e
Plane: added ESC_TELEMETRY to mavlink streams
2018-06-21 10:48:02 +10:00
Peter Barker
f984e5e31d
Plane: use magic force arm/disarm definitions
2018-06-20 11:43:38 +10:00
Peter Barker
f5e241af01
Plane: option to force arm, bypassing checks
2018-06-20 11:43:38 +10:00
Peter Barker
2b7f9247e8
Plane: use AP_FWVersion singleton
2018-06-18 19:10:37 +01:00
Peter Barker
9824832523
Plane: use AP_RTC
...
Plane: AP_GPS now sets the system time directly
2018-06-15 08:01:22 +10:00
Michael du Breuil
12da35220c
Plane: Simplify radio trimming, improve MAVLink report
2018-06-11 16:29:36 -07:00
Michael du Breuil
fae8d1e489
Plane: Log navigation target location
...
Closes #4358
2018-06-12 09:08:58 +10:00
Peter Barker
2cdcca2841
Plane: move handling of MAV_CMD_DO_GRIPPER up
2018-06-11 19:07:39 +01:00
Andrew Tridgell
d8a7618e15
Plane: update use of AC_Loiter controller for quadplane
...
this changes the way the loiter controller is initialised for QLOITER,
after discussions with Leonard.
The way we were doing it could cause a sudden acceleration demand when
switching into QLOITER.
This also changes the default loiter parameters to reduce the maximum
acceleration that will be applied in QLOITER. Many thanks to Leonard for
the advice
2018-06-11 08:40:58 +09:00
Michael du Breuil
47c0048499
Plane: Remove manual polling of flap input channel
2018-06-05 09:51:09 +10:00
Michael du Breuil
a98a8d0789
Plane: Update to support new RC_Overrides conventions
2018-06-05 09:51:09 +10:00
Michael du Breuil
749861f8ad
Plane: Only send healthy airspeed reports
2018-06-05 09:27:19 +10:00
Michael du Breuil
44f2a652f3
Plane: Remove software type param
2018-06-05 09:14:12 +10:00
Peter Barker
9437e893e5
Plane: move try_send_message handling of EKF_STATUS_REPORT up
2018-06-01 16:12:45 +01:00
Peter Barker
ac729f4614
Plane: lock home when it is set from the GCS
2018-05-29 14:38:45 +10:00
Peter Barker
18c4823427
Plane: return MAV_RESULT_ACCEPTED for setting home to current location
2018-05-29 14:38:45 +10:00
Peter Barker
bc9df01d21
Plane: remove sending of statustext for home location
2018-05-29 14:38:45 +10:00
Peter Barker
22306c370b
Plane: factor out a Plane::set_home
2018-05-29 14:38:45 +10:00
Peter Barker
ad600fff68
Plane: split home-set and home-locked state
2018-05-29 14:38:45 +10:00
Peter Barker
5a087ee7e2
Plane: create persist_streamrates() callback to indicate persistence
2018-05-29 13:08:29 +10:00
Peter Barker
8b4ffb11f5
Plane: move sending of vfr_hud up
2018-05-29 13:00:40 +10:00
Tom Pittenger
4dca1c48f2
Plane: update vehicle max_speed to ADSB library
2018-05-23 14:02:45 -07:00
Peter Barker
ef77bea4eb
Plane: move sending of simstate up
2018-05-23 18:36:50 +10:00
Peter Barker
2a68eca273
Plane: add type-correctness for stream messages
2018-05-22 11:21:25 +10:00
Peter Barker
2112d76b75
Plane: move try_send_message of servo-output-raw up
2018-05-21 19:08:08 +01:00
Andrew Tridgell
ce73918873
Plane: fixed throttle_percentage for twin engine planes
...
there is no servo output for function 70 - use the scaled value
2018-05-21 14:39:56 +10:00
Andrew Tridgell
805b159fd4
Plane: update release notes for 3.9.0
2018-05-21 14:38:35 +10:00
Peter Barker
cdf4128900
Plane: move sending of POSITION_TARGET_GLOBAL_INT up
2018-05-18 20:26:37 +10:00
Peter Barker
57cc0cac97
Plane: GCS_MAVLink base class now uses same ekf call to get alt
2018-05-17 15:48:06 +01:00
Peter Barker
5aefb90e61
Plane: move sending of GLOBAL_POSITION_INT up to GCS_MAVLINK
2018-05-17 15:48:06 +01:00
Peter Barker
1545b9b161
Plane: remove arguments to send_home and send_ekf_origin
2018-05-17 20:42:36 +10:00
Peter Barker
6f8339028e
Plane: move send_attitude into GCS_MAVLINK_Plane
2018-05-17 18:28:43 +10:00
Peter Barker
1f9d1ee5a2
Plane: move try_send_message sending of scaled_pressure up
2018-05-17 15:37:14 +10:00
Peter Barker
0e3ad3f023
Plane: move try_send_message sending of sensor offsets up
2018-05-17 15:37:14 +10:00
Peter Barker
e6411c6804
Plane: move try_send_message of RAW_IMU up to GCS_MAVLINK
2018-05-17 15:37:14 +10:00
Peter Barker
7afd056e98
Plane: handle setting of ekf origin in GCS_MAVLink
2018-05-17 10:13:42 +10:00
Peter Barker
052b76d017
Plane: move Log_Write_Home_And_Origin into AP_AHRS
2018-05-17 10:13:42 +10:00
Michael du Breuil
fcf6c69a5b
Plane: AP_Proximity is now a common library
2018-05-16 23:21:41 +01:00
Michael du Breuil
499df8e0b3
Plane: Move MAVLink rangefinder up to parent
2018-05-16 23:21:41 +01:00
Michael du Breuil
8afc96097b
Plane: Send all distance sensors
2018-05-16 23:21:41 +01:00
Michael du Breuil
b479f3760a
Plane: Remove some unneeded logging indirection
...
Saves 32 bytes on make px4-v2
2018-05-16 20:34:00 +10:00
Peter Barker
eb026e0a5f
Plane: correct compilation when logging is disabled
2018-05-10 17:55:13 +09:00
Peter Barker
8da8c616f6
Plane: move sending of battery data up
2018-05-09 11:40:31 -07:00
Peter Barker
0fec702ba6
Plane: move data stream send up
2018-05-09 16:15:38 +10:00
Peter Barker
e10c23bd43
Plane: make scheduler track whether it has called the delay callback
2018-05-09 16:15:38 +10:00
Andrew Tridgell
8d996112ec
Plane: don't do throttle ESC scaling for quadplanes
2018-05-09 14:17:15 +10:00
Peter Barker
1dcd731005
Plane: AP_RSSI is included in build for all vehicles
2018-05-08 12:33:32 +01:00
Peter Barker
68497f27fa
Plane: move try_send_message handling of RC_CHANNELS up
2018-05-08 12:33:32 +01:00
Peter Barker
8df625e81a
Plane: move try_send_message of heartbeats up to GCS_MAVLINK
2018-05-07 11:30:13 -06:00
Peter Barker
c1680d90a6
Plane: move try_send_message handling of VIBRATION up
2018-05-07 11:23:28 -06:00
Peter Barker
2e3a7fc5b6
Plane: remove rcmap member from AP_AdvancedFailsafe
2018-05-05 18:06:31 +09:00
Andrew Tridgell
c20351202d
Plane: document TKOFF_THR_SLEW = -1 for takeoff
2018-04-26 15:59:06 +10:00
Andrew Tridgell
badea86fbd
Plane: remove old pde file
...
this was here for upgrading very old MissionPlanner versions. We can
remove it now
2018-04-26 14:25:01 +10:00
Michael du Breuil
2deac7238c
Plane: Support new RC_Channels::read_input()
2018-04-26 08:00:09 +10:00
Andrew Tridgell
7208fe96d5
Plane: update release notes for 3.8.5
2018-04-25 20:05:50 +10:00
Andrew Tridgell
d07f8aa42b
Plane: fixed a bug in transition to QSTABILIZE for tailsitters
...
this bug was found bug Marco on his tailsitter. It resulted in zero
throttle for 2s in transition from FBWA to QSTABILIZE
2018-04-25 18:01:12 +10:00
night-ghost
aa53832a70
ArduPlane: devo telemetry support (RX705/707)
2018-04-24 10:44:28 +10:00
Peter Barker
5cc98a9733
Plane: use AP_ServoRelayEvents singleton
2018-04-18 20:31:55 +09:00
Peter Barker
5ef417a669
Plane: GPS now logs its own data
2018-04-18 13:50:55 +09:00
Michael du Breuil
7b7f5e242b
Plane: Simplify channel reading
2018-04-14 14:05:20 +10:00
Peter Barker
2b54113334
Plane: Baro does its own dataflash logging
2018-04-12 19:12:12 +01:00
Michael du Breuil
3e4288d604
Plane: Use RC_Channels instead of hal.rcin
2018-04-11 21:47:07 +01:00
Michael du Breuil
1af2155641
Plane: Check MANUAL_CONTROL target
2018-04-10 16:54:34 +01:00
Randy Mackay
840a6e4147
Plane: quadplane uses AC_Loiter
...
includes param conversion
2018-04-04 10:45:10 +09:00
Francisco Ferreira
bbe3e41162
Plane: fix method shadowing
2018-04-03 16:29:33 +01:00
Peter Barker
f6a185a3c3
Plane: factor vehicle's mavlink send_heartbeat
2018-04-03 13:05:19 +01:00
Peter Barker
58d41e40d3
Plane: let GCS_MAVLink calibrate airspeed sensor
...
Also remove useless zero_airspeed function
2018-04-02 23:25:05 +01:00
Peter Barker
65893cfca5
Plane: tidy handling of barometer calibrations
2018-04-02 23:25:05 +01:00
Peter Barker
71bc3f5def
Plane: move common calibration functions up
2018-04-02 23:25:05 +01:00
Peter Barker
91c2ece7a2
Plane: factor out preflight calibration function
2018-04-02 23:25:05 +01:00
Michael du Breuil
7405bb7b85
Plane: Support new battery failsafes
2018-03-27 22:12:21 +01:00
Peter Barker
8a75a804e7
Plane: allow DataFlash to handle log sending
2018-03-26 09:22:47 +09:00
Przemek Lekston
e5a9ac84e7
[Plane] Fix verify_loiter_heading acceptance criteria.
2018-03-20 10:25:35 -07:00
Peter Barker
5572d83ce9
Plane: move handling of get_home_position up
2018-03-19 10:32:37 +09:00
Peter Barker
7fd859da65
Plane: move home state into AP_AHRS
2018-03-19 10:32:37 +09:00
Peter Barker
7c86c4fe61
Plane: use ins singleton
2018-03-16 00:37:35 -07:00
Randy Mackay
548a7f8fcf
Plane: add minor comment to quadplane
2018-03-16 13:50:57 +09:00
Leonard Hall
ee745d2cd2
Plane: quad plane uses rate-control control during transitions
2018-03-16 13:50:57 +09:00
Leonard Hall
a16d4ddad7
Plane: quadplane uses poscontrol instead of loiter
2018-03-16 13:50:57 +09:00
Randy Mackay
c5d838125b
Plane: quadplane logs PSC message
2018-03-16 13:50:57 +09:00
Randy Mackay
09cad7c59d
Plane: quadplane integrates attitude control inertial_frame_reset
2018-03-16 13:50:57 +09:00
Randy Mackay
03c162432e
Plane: quadplane provides dt to AC_WPNav::set_pilot_desired_acceleration
2018-03-16 13:50:57 +09:00
Randy Mackay
a0a9a68fbc
Plane: quadplane smoothing gain replaced by Q_A_INPUT_TC
...
Q_A_INPUT_TC parameter allows this to be tuned and a single value (which defaults to a value between the two previously used values) is used for all modes
2018-03-16 13:50:57 +09:00
Leonard Hall
aa47b19dea
Plane: remove quadplane calls to multicopter poscontrol's freeze_ff_xy
2018-03-16 13:50:57 +09:00
Peter Barker
f558bbca2e
Plane: use baro singleton
2018-03-08 21:20:05 -08:00
Peter Barker
4104d40130
Plane: delete correct assignment operator
2018-03-08 21:20:05 -08:00
Peter Barker
5671b3173e
Plane: use AHRS singleton in GCS_MAVLink
2018-03-07 12:34:39 +00:00
Peter Barker
0862d1454e
Plane: use AP::ahrs() for ADSB
2018-03-07 12:34:39 +00:00
Dr.-Ing. Amilcar Do Carmo Lucas
33288fa676
Plane: NFC adapt to new AP_Battery method name
2018-03-03 17:19:13 +00:00
Tom Pittenger
6820531e2a
Plane: fixed error string spelling
2018-03-02 21:37:11 -08:00
Michael du Breuil
faea5d285c
Plane: Consolidate some of the PID logging details
2018-03-03 17:34:18 +12:00
Andrew Tridgell
27e4953ad8
Plane: disable HIL on px4-v2
...
this saves enough flash for px4-v2 to fit again
2018-03-03 13:35:39 +11:00
night-ghost
98b8a61ca8
Plane: allow AP_Stats to be optional
2018-03-02 07:23:35 +11:00
David Ingraham
a6aeebad4b
Plane: Add support for AP_Gripper
2018-03-01 14:14:43 +11:00
David Ingraham
9419cc3b32
Plane: Fix param docs for quadplane attitude control
...
Docs aren't currently being generated for plane for AC_AttitudeControl.cpp. I believe this will fix that.
2018-02-20 16:38:27 +11:00
Andrew Tridgell
e6cebdecd1
Plane: use scheduler.get_last_loop_time_s()
2018-02-13 17:15:05 +11:00
Peter Barker
3859e5dfb1
Plane: eliminate update_perf_logging scheduler table shim
2018-02-13 17:15:05 +11:00
Andrew Tridgell
36660b2124
Plane: use filtered loop time
2018-02-13 17:15:05 +11:00
Peter Barker
4586b892f2
Plane: pass log-performance-bit at init time rather than update time
2018-02-13 17:15:05 +11:00
Peter Barker
8cae776448
Plane: move logging of PM and PERF messages to AP_Scheduler
2018-02-13 17:15:05 +11:00
Peter Barker
02540fdbf9
Plane: use AP_Scheduler's loop() function
2018-02-13 17:15:05 +11:00
Peter Barker
73092c3c30
Plane: use scheduler ticks in place of mainloop_count
2018-02-13 17:15:05 +11:00
Peter Barker
519e6c31d2
Plane: use AP::PerfInfo library
2018-02-13 17:15:05 +11:00
Randy Mackay
dd6755f486
Plane: fix global-pos-int velocity direction to NED
2018-02-13 08:52:48 +09:00
Andrew Tridgell
2fb6113098
Plane: use AP:PerfInfo class
2018-02-10 10:50:22 +11:00
Andrew Tridgell
ac196b8e0a
Plane: fixed build error
2018-02-10 08:00:24 +11:00
Tom Pittenger
50a2d824c4
Plane: crash detection hard landing detection should skip debounce
...
closes https://github.com/ArduPilot/ardupilot/issues/7683
2018-02-09 11:40:12 -08:00
Andrew Tridgell
d1e11a5bde
Plane: fixed build (remove learn_offsets call)
2018-02-08 17:36:33 +11:00
Michael du Breuil
43972f8e56
Plane: Move battery logging code to AP_BattMonitor
2018-02-06 00:11:32 +00:00
Randy Mackay
ddcd08d6b6
Plane: PSC_ACCZ param name shortened
2018-01-31 08:48:21 +09:00
Michael du Breuil
aec7521da4
Plane: Fix truncation of a time interval
...
Truncating the a millisecond time delta to uint16_t causes it to wrap
every 65 seconds, which could momentarily reset the desired climb rate
2018-01-25 14:30:49 +11:00
Randy Mackay
d579e086cf
Plane: quadplane param index comment for moved PIDs
2018-01-24 21:14:53 +09:00
Andrew Tridgell
20b05e4228
Plane: added conversion code for PID layout change
...
this copes with the move of multicopter PIDs inside the position
controller
2018-01-24 18:23:59 +11:00
Tom Pittenger
518abfe1d0
Plane: Allow GUIDED mode to take advantage of crosstrack flag.
2018-01-22 19:17:09 -08:00
Randy Mackay
7b1157e2d8
Plane: remove setting accel_z PID controller's dt
...
This is handled within pos-controller's set_dt function
2018-01-23 12:00:43 +09:00
Randy Mackay
f41f4dc6e5
Plane: move pos-control pids to pos-control library
2018-01-23 12:00:43 +09:00
Randy Mackay
017e71a748
Plane: quadplane velocity pi moves to position control library
2018-01-23 12:00:43 +09:00
Michael du Breuil
ff85f5e9bd
Plane: Support AP_BattMonitor_Params
2018-01-17 22:21:55 +00:00
Andrew Tridgell
5614fd1ccc
Plane: use calloc in preferance to malloc
2018-01-17 11:22:05 +11:00
Andrew Tridgell
2c6a004a67
Plane: mark version as 3.9.0-dev
2018-01-16 11:04:55 +11:00
Andrew Tridgell
be0d2229c1
Plane: update release notes
2018-01-16 11:03:26 +11:00
Andrew Tridgell
31d7d9f909
Plane: change airspeed parameter prefix
...
this makes for clearer parameter names with dual sensors
2018-01-16 07:14:20 +11:00
Andrew Tridgell
c1cbbf9203
Plane: check all airspeed sensors are healthy
2018-01-16 07:14:20 +11:00
Tom Pittenger
746ca91649
Plane: reset groundspeed_undershoot value when GPS is lost
...
If we lose GPS lock the gndspd undershoot value gets stuck at the last calculated value forever (until GPS locks again)
2018-01-09 17:05:04 -08:00
Tom Pittenger
1ef0f27786
Plane: allow control_mode enum to be in arbitrary order
...
never use control_mode >= BLAH. This requires the order to be important which greatly increases chance for unexpected behavior
Closes https://github.com/ArduPilot/ardupilot/issues/4656
2018-01-09 17:05:04 -08:00
Tom Pittenger
39a200b83f
Plane: allow control_mode enum to be in arbitrary order
...
never use control_mode >= BLAH. This requires the order to be important which greatly increases chance for unexpected behavior
Closes https://github.com/ArduPilot/ardupilot/issues/4656
2018-01-09 17:05:04 -08:00
Peter Barker
c4c6b3cc70
Plane: AP_AHRS no longer requires GPS in constructor
2017-12-27 00:58:02 +00:00
Peter Barker
c5ae01fc6d
Plane: use GPS singleton
2017-12-27 00:58:02 +00:00
luweikxy
25224cd261
Plane: remove dead code from do_vtol_land
2017-12-14 20:52:18 +09:00
Andrew Tridgell
30e224e705
Plane: removed create() method for objects
...
See discussion here:
https://github.com/ArduPilot/ardupilot/issues/7331
we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach
Thanks to assistance from Lucas, Peter and Francisco
2017-12-14 08:12:28 +11:00
Michael Oborne
9ed3ca3d35
ArduPlane: update version number
2017-12-13 18:00:03 +11:00
Ubuntu 16.04 VM
624aef401d
Plane: Enforce THR_MIN/THR_MAX in VTOL modes
2017-12-11 22:18:39 -08:00
Tom Pittenger
512b327cd4
Plane: failsafe events to use enums instead of magical numbers : Non-functional change
2017-12-07 00:19:32 -08:00
Peter Barker
af007c5f0f
Plane: tighten handleMessage result type
2017-12-01 17:01:10 +00:00
Tom Pittenger
3d6cc59a6b
Plane: cleanup geofence warnings
2017-11-27 18:35:49 -08:00
Andrew Tridgell
2a81792b41
Plane: don't disable compass on one bad reading
...
the compass can go back for a short time and recover
found by Michael
2017-11-28 09:02:24 +11:00
Andrew Tridgell
49cb245ea6
Plane: use a min airspeed for is_flying test
...
in VTOLs setting min airspeed to zero can be useful
2017-11-28 09:02:24 +11:00
Michael du Breuil
1a3ca43e86
Plane: Don't check FS_SHORT_TIMEOUT if it's disabled
...
Also renames the check_minimum_altitude() to reflect that it's only used
for FBWB.
2017-11-24 09:58:01 -08:00
Tom Pittenger
7271586a47
Plane: invert auto_state.no_crosstrack flag to be auto_state.crosstrack. Non-functional change
2017-11-23 09:25:18 -08:00
Peter Barker
6ed0d645a3
Plane: support for units on fields
2017-11-23 10:40:30 +11:00
Guy Tzoler
a6c7890c74
Plane: use cork/push wrapper
2017-11-21 14:10:54 +11:00
Michael du Breuil
9720fcb8cc
Plane: Only update home when not armed, rather then not soft armed
...
Plane supports being armed, in takeoff logic and not spinning the motor
until the moment the safety button has been pressed. Unfortunately
because the safety button is required to be pressed for soft arming this
results in the plane updating home position while the user moves the
vehicle or is holding it to throw the vehicle which will can result in
several meters of altitude error from where the user expected home to
be.
Because the normal approach to plane is to have activated the safety
button before arming the aircraft this is not expected to be a behaviour
change for most users, but an improvement for people who use the button
to initiate a takeoff.
2017-11-21 11:45:15 +11:00
Andrew Tridgell
f7a735b990
Plane: fixed transitions for tailsitters after auto-takeoff
...
need to use angle wait
2017-11-19 16:06:02 +11:00
Andrew Tridgell
85573b3ff3
Plane: fixed a division by zero
...
if min airspeed is zero
2017-11-19 16:04:40 +11:00
Andrew Tridgell
e06f160dc9
Plane: disable rudder scaling in tailsitters
...
this is most often implemented as dual-motor differential thrust, and
we don't want to do surface speed scaling for that.
In the future we'll move this scaling so it can be done on rudders for
3D planes
2017-11-18 10:38:46 +11:00
Peter Barker
ee5f550475
Plane: AP_Camera uses GPS singleton
2017-11-16 15:28:37 +00:00
Peter Barker
b4294c00f6
Plane: use gps singleton for GCS functions
2017-11-15 13:43:03 +00:00
André Kjellstrup
1d27e21d83
Plane: Option to trig by distance only when in AUTO mode
2017-11-14 00:10:22 +00:00
Andrew Tridgell
bf1aa64345
Plane: updated release notes for 3.8.3
2017-11-13 15:06:42 +11:00
Andrew Tridgell
271373e1e8
Plane: added a not on min slew rate for throttle
2017-11-13 10:29:46 +11:00
Michael du Breuil
767018b1d4
Plane: Support unlocking cruise heading with rudder
2017-11-09 09:39:44 +11:00
Michael du Breuil
bd32b5deb7
Plane: update isFlying() landing check
...
When we are landing a sink_rate < -0.2f means the vehicle is climbing,
which should never happen during an approach for any supported landing
type (slope or deepstall), and on hard impacts with the ground its
common for the vehicle altitude to be projected to low and climb back to
the correct altitude slowly (but at a higher rate). This changes the
check to only consider sinks while on approach as acceptable.
2017-11-07 08:57:15 +01:00
Tom Pittenger
8029a7f10e
Plane: add Tom Pittenger to developers list
...
Plane: add Tom Pittenger to developers list. He was added to main Plane.h as "Lead Developer" here *https://github.com/ArduPilot/ardupilot/blob/master/ArduPlane/Plane.h#L2 ) but never to the main ArduPilot.c file.
2017-11-06 13:46:32 +01:00
Andrew Tridgell
5843086760
Plane: update release notes for 3.8.3beta4
2017-11-05 21:47:15 +11:00
Andrew Tridgell
957c1f6d23
Plane: extend QLOITER transition pitch limit
...
use twice transition time for pitch envelope to reduce QLOITER
transition harshness
2017-11-05 21:35:32 +11:00
Andrew Tridgell
bbf98fae46
Plane: fixed a warning
2017-11-05 21:25:37 +11:00
Andrew Tridgell
9c8cd6c1cc
Plane: added Q_TRANS_DECEL
...
this gives a deceleration rate for QRTL transition from RTL, and also
for transitions to QLOITER
2017-11-05 20:44:42 +11:00
Andrew Tridgell
e27c54a312
Plane: smooth out fwd tailsitter transition
...
use Q_TRANSITION_MS and the transition angle to pitch forward more
slowly
2017-11-05 17:25:00 +11:00
Andrew Tridgell
21164ef409
Plane: added tailsitter surface speed scaling
...
added scaling of control surfaces by throttle when in hover. This helps
the controller remain stable over a wide range of throttle levels, such
as when descending or rapidly climbing
2017-11-05 17:05:08 +11:00
Michael du Breuil
83decd1370
ArduPlane: Only run is_flying landing checks when in landing stage
2017-11-04 10:07:16 +11:00
Andrew Tridgell
126d5ce5d4
Plane: re-implement MIXING_OFFSET
...
this was lost in the conversion of SRV_Channels
2017-11-04 09:34:22 +11:00
Michael du Breuil
e63e39c411
Plane: Don't broadcast PWM value that tripped throttle failsafe
2017-11-02 16:46:08 -07:00
Michael du Breuil
d52f5155f0
Plane: Rename rc failsafe state members
2017-11-02 16:46:08 -07:00
nick2204
7d91755bd1
Plane: update Q_OPTIONS docs
...
Made q_options description a little clearer
2017-11-01 09:38:42 +11:00
Andrew Tridgell
1bee1dd210
Plane: log currently used airspeed
...
this logs whatever airspeed is being used for flight
2017-11-01 09:22:15 +11:00
Andrew Tridgell
43ee462813
Plane: prepare for 3.8.3beta2
2017-10-31 18:05:50 +11:00
Andrew Tridgell
f14f40d3ef
Plane: fixed GUIDED loiter with Q_RTL_MODE=1
...
this was broken by the recent RTL_RADIUS changes
thanks to Nick for noticing this!
2017-10-31 18:02:31 +11:00
Andrew Tridgell
84e5cd7e14
Plane: update release notes for 3.8.3beta1
2017-10-30 18:46:51 +11:00
Andrew Tridgell
1085069851
Plane: use WP_LOITER_RAD if RTL_RADIUS is 0 for QRTL
2017-10-30 16:52:19 +11:00
Andrew Tridgell
aa430a6e2c
Plane: use RTL_RADIUS for QRTL threshold
...
when Q_RTL_MODE=1 in a quadplane use RTL_RADIUS as the distance to
switch to QRTL mode. We navigate to the destination using direct
waypoint navigation instead of using a loiter circle.
2017-10-30 16:30:38 +11:00
Andrew Tridgell
552faa8f67
Plane: smoother tailsitter transitions
...
this smooths out tailsitter transitions in both directions, adding a
new FW to VTOL transition state
2017-10-30 16:30:38 +11:00
Andrew Tridgell
c24ee9192b
Plane: prevent a float exception at pitch 90
...
this can happen with a tailsitter
2017-10-30 16:30:38 +11:00
Andrew Tridgell
214434a2d7
Plane: fixed tailsitter ANGLE_WAIT transition
...
we need vtol control during transition from hover to fwd flight
2017-10-30 16:30:38 +11:00
Andrew Tridgell
af893ddde7
Plane: implement Q_OPTIONS
...
this allows for NAV_TAKEOFF to be treated as NAV_VTOL_TAKEOFF in
quadplanes, and for level flight to be maintained during quadplane
transitions
2017-10-30 16:30:10 +11:00
Andrew Tridgell
02f8d888c3
Plane: relax controllers when disarmed
...
this prevents any remaining integrator from a previous flight stage from
affecting flight across a disarm
2017-10-30 16:30:10 +11:00
Peter Barker
d49be616da
Plane: call ins's periodic function
2017-10-27 16:33:45 +11:00
Tom Pittenger
8adacfeea3
Plane: always log MODE and include reason when logging is enabled
2017-10-25 21:18:29 +11:00
Andrew Tridgell
92ee05b925
Plane: fixed motor channel handling
2017-10-25 11:39:11 +11:00
Peter Barker
4ce051af82
Plane: ensure we're in short failsafe before using failsafe.ch3_timer_ms
2017-10-24 09:28:13 +11:00
Peter Barker
ff88b0dfda
Plane: remove redundant failsafe string
2017-10-24 09:28:13 +11:00
Peter Barker
7feef72b34
Plane: improve failsafe notifications
2017-10-24 09:28:13 +11:00
Peter Barker
01d8c506d2
Plane: add option to entirely disable short failsafe
2017-10-24 09:28:13 +11:00
Andrew Tridgell
6526ff504d
Plane: fix for changes to AP_Motors API
2017-10-22 15:52:50 +11:00
Andrew Tridgell
e008559b6e
Plane: support LOITER_TO_ALT in quadplanes
2017-10-21 18:50:01 +11:00
Andrew Tridgell
8178ab4037
Plane: make mav_type in HEARTBEAT configurable
...
needed for qgc to setup for quadplanes
2017-10-20 15:41:06 +11:00
Andrew Tridgell
0aed5a9a57
Plane: prevent controller windup on ground
...
when on the ground in an auto-throttle mode lik FBWB or CRUISE, we may
have the throttle suppressed. In that case we should not run the
multicopter controller on quadplanes, or it may build up control which
will then apply on takeoff. This is particularly severe for aircraft
that are not level on the ground, such as taildragger quadplanes
Fixes https://discuss.ardupilot.org/t/quadplane-flips-on-takeoff/22095
many thanks to Sriram for reporting
2017-10-20 15:41:04 +11:00
Andrew Tridgell
1a95dcbdd7
Plane: update docs for Q_YAW_RATE_MAX
2017-10-20 15:40:58 +11:00
Michael du Breuil
615f6dfadb
Plane: Don't log PIDL messages
2017-10-17 14:37:11 -07:00
Michael du Breuil
cc55e5a8fa
Plane: Don't log SONR if there are no rangefinders
2017-10-16 10:10:26 -07:00
Andrew Tridgell
f81ec9b1b3
Plane: support simple accelcal
2017-10-10 10:57:38 +11:00
Andrew Tridgell
f5b4d8d99c
Plane: added frame type 11 for FlreFlyY6
2017-10-06 11:36:34 +11:00
Michael du Breuil
52fc2c82af
Plane: Report GPS health
2017-09-27 19:29:32 +01:00
Lucas De Marchi
a2b67ed615
ArduPlane: use static method to construct AP_Landing
2017-09-26 03:01:21 +01:00
Lucas De Marchi
e10c60e492
ArduPlane: use static method to construct controllers
2017-09-26 03:01:21 +01:00
Lucas De Marchi
05c870a4d4
ArduPlane: use static method to construct AP_TECS
2017-09-26 03:01:21 +01:00
Lucas De Marchi
bfd13dfe87
global: use static method to construct AP_AHRS_DCM
2017-09-26 03:01:21 +01:00
Lucas De Marchi
beabae6a98
global: use static method to construct AP_AHRS_NavEKF
2017-09-26 03:01:21 +01:00
Lucas De Marchi
c9fbf7b722
global: use static method to construct AP_NavEKF3
2017-09-26 03:01:21 +01:00
Lucas De Marchi
e2fe36357a
global: use static method to construct AP_NavEKF2
2017-09-26 03:01:21 +01:00
Lucas De Marchi
6781a44046
global: use static method to construct AP_Avoidance_*
2017-09-26 03:01:21 +01:00
Lucas De Marchi
119e82f32e
ArduPlane: add static create method for AP_Avoidance_*
2017-09-26 03:01:21 +01:00
Lucas De Marchi
6d009cdf6e
global: use static method to construct AP_ADSB
2017-09-26 03:01:21 +01:00
Lucas De Marchi
cf6ea9642e
global: use static method to construct AP_Terrain
2017-09-26 03:01:21 +01:00
Lucas De Marchi
31db77e47b
global: use static method to construct AP_Parachute
2017-09-26 03:01:21 +01:00
Lucas De Marchi
eadd650d78
global: use static method to construct AP_RSSI
2017-09-26 03:01:21 +01:00
Lucas De Marchi
b05610870c
global: use static method to construct AP_Rally
2017-09-26 03:01:21 +01:00
Lucas De Marchi
18aa88b329
global: use static method to construct AP_Mount
2017-09-26 03:01:21 +01:00
Lucas De Marchi
c3647f0185
global: use static method to construct AP_Camera
2017-09-26 03:01:21 +01:00
Lucas De Marchi
cc53e7bc4b
global: use static method to construct AP_ServoRelayEvents
2017-09-26 03:01:21 +01:00
Lucas De Marchi
13d7f58036
global: use static method to construct AP_Relay
2017-09-26 03:01:21 +01:00
Lucas De Marchi
9ce6019138
global: use static method to construct AP_Frsky_Telem
2017-09-26 03:01:21 +01:00
Lucas De Marchi
b022c02029
global: use static method to construct AP_BattMonitor
2017-09-26 03:01:21 +01:00
Lucas De Marchi
69b6d95cb2
global: use static method to construct AP_Board_Config{,_CAN}
2017-09-26 03:01:21 +01:00
Lucas De Marchi
a74e700006
global: use static method to construct RCMapper
2017-09-26 03:01:21 +01:00
Lucas De Marchi
72fd2d6f05
global: use static method to construct AP_SerialManager
2017-09-26 03:01:21 +01:00
Lucas De Marchi
fbe0d9761c
global: use static method to construct AP_OpticalFlow
2017-09-26 03:01:21 +01:00
Lucas De Marchi
2d2876a226
ArduPlane: use static method to construct AP_Arming_Plane
2017-09-26 03:01:21 +01:00
Lucas De Marchi
b36a5919f5
global: use static method to construct AP_Mission
...
This also move the initialization to be in the header for those that
weren't already to maintain consistency.
2017-09-26 03:01:21 +01:00
Lucas De Marchi
de5e044b02
global: use static method to construct AP_RPM
2017-09-26 03:01:21 +01:00
Lucas De Marchi
40fd1b346c
global: remove rangefinder from AP_AHRS_NavEKF
...
AP_AHRS_NavEKF doesn't use the rangefinder, it just delegates the
calls to the right estimator.
For libraries/AP_AHRS/examples/AHRS_Test/AHRS_Test.cpp the initialization
order has also been modified to match the order on vehicles. It's more
correct since it passes a reference when EKF2/EKF3 are already
constructed, while thos constructors use a pointer. Ideally these
should be moved to an init() method though, or use a get_instance().
2017-09-26 03:01:21 +01:00
Lucas De Marchi
9027a55696
global: use static method to construct RangeFinder
2017-09-26 03:01:21 +01:00
Lucas De Marchi
f5c2ffffb9
global: remove DataFlash from AP_Mount::init()
2017-09-26 03:01:21 +01:00
Lucas De Marchi
53c82b4aaf
global: use static method to construct DataFlash_Class
2017-09-26 03:01:21 +01:00
Lucas De Marchi
62ac0ab8aa
global: use static method to construct AP_Notify
2017-09-26 03:01:21 +01:00
Lucas De Marchi
de680dac5b
global: use static method to construct AP_Scheduler
2017-09-26 03:01:21 +01:00
Lucas De Marchi
8094482f21
global: use static method to construct AP_GPS
2017-09-26 03:01:21 +01:00
Lucas De Marchi
87b30b4552
global: use static method to construct AP_InertialSensor
2017-09-26 03:01:21 +01:00
Lucas De Marchi
c1a957fbf3
global: use static method to construct Compass
2017-09-26 03:01:21 +01:00
Lucas De Marchi
91feec0e14
global: use static method to construct AP_Baro
2017-09-26 03:01:21 +01:00
Lucas De Marchi
96e7ea4d69
ArduPlane: protect version.h from inclusion and use ap_version.h
2017-09-23 21:37:45 -07:00
Lucas De Marchi
36c80daa86
ArduPlane: do not include version.h/ap_version.h
...
The interface provided by each vehicle should be used to get the
version.
2017-09-23 21:37:45 -07:00
Lucas De Marchi
18ff17e22c
ArduPlane: move version to a static member
...
We should never include version.h or ap_version.h headers directly
on a header since this will trigger a complete rebuild of the
codebase when we commit to the repository. The ap_version.h header
is auto-generated containing information from the current commit.
If we include it in a header, every other file that ends up including
that header (directly or indirectly) will need to be rebuilt. No
ccache's cache beats having to do nothing when the header is just
not included.
version.h contains information that is kept on a struct inside
each vehicle. Rather than using the macros from each vehicle,
the getter should be preferred, which returns an AP_FWVersion
referente.
2017-09-23 21:37:45 -07:00
Ferruccio Vicari
85ab3edc5f
Plane: Smoother transition to QLOITER and QLAND
...
Use estimated stopping position
2017-09-21 07:57:38 +10:00
Peter Barker
1a724ded2a
Plane: AP_Arming: sanity-check fs timeout parameters
2017-09-20 09:46:24 -07:00
mirkix
7c6be7c421
Plane: change format of reset alt target message
2017-09-20 20:28:53 +10:00
Randy Mackay
667cdcdfcf
Plane: resolve compiler warning while using send_text
...
non-functional change
2017-09-20 12:14:38 +09:00
Randy Mackay
2073d65975
Plane: command-long DO_SET_HOME check first param is zero
2017-09-20 12:14:38 +09:00
Randy Mackay
640fb91329
Plane: accept DO_SET_HOME within COMMAND_INT
2017-09-20 12:14:38 +09:00
Andrew Tridgell
3d16ca7144
Plane: fixed MANUAL_RCMASK
...
ensure it only applies in MANUAL, and fixed input scaling in px4io
2017-09-19 17:05:56 +10:00
Peter Barker
7e631ba16c
Plane: move handling of SET_GPS_GLOBAL_ORIGIN up
2017-09-19 15:44:23 +09:00
mirkix
b682f3f6d9
Plane: fix parameter units
2017-09-19 11:34:26 +10:00
Randy Mackay
3d7b6ddc40
Plane: support SET_GPS_GLOBAL_ORIGIN message
2017-09-19 10:30:15 +09:00
Peter Barker
1304b86d09
Plane: remove old DO_SET_MODE support
...
We no longer support setting anything except custom-modes
2017-09-19 01:24:11 +01:00
Andrew Tridgell
35c1a732a6
Plane: allow takeoff in guided then fw loiter
...
this allows for quadplane takeoff in GUIDED with Q_GUIDED_MODE=0. The
takeoff will be VTOL, but subsequent guided points will be fixed wing
2017-09-18 10:21:53 +10:00
Tom Pittenger
85b7f1bbb4
Plane: guided takeoff success should return true
2017-09-13 14:46:22 -07:00
Michael du Breuil
4fd13d5205
Plane: Support landing terminations on landing backends that support it
2017-09-13 13:15:08 -07:00
Peter Barker
aee939f891
Plane: move gcs_out_of_time into GCS object
2017-09-12 18:28:07 +01:00
Andrew Tridgell
73d6a05241
Plane: support change alt for GUIDED from qgc
2017-09-11 13:26:48 +10:00
Andrew Tridgell
1c75cd7039
Plane: update release notes for 3.8.2
2017-09-11 09:57:28 +10:00
Andrew Tridgell
11b9805dce
Plane: added MANUAL_CONTROL support
...
allows for joystick with QGC
2017-09-11 07:55:48 +10:00
Andrew Tridgell
37220e1568
Plane: removed unused prototypes
2017-09-10 17:15:18 +10:00
David Ingraham
750212eb8f
Plane: Remove deprecated control surface mixing functions
...
This commit removes the deprecated functions used for calculating elevon and vtail mixes. This code is currently unrechable.
The functions that called these were removed in PR #6546 .
2017-09-10 17:14:14 +10:00
Andrew Tridgell
d61705ee51
Plane: added release notes for plane 3.8.2beta1
2017-09-09 08:32:14 +10:00
Andrew Tridgell
600a5c44d2
Plane: allow changing of target altitude in GUIDED
2017-09-09 08:14:09 +10:00
Andrew Tridgell
bc17c26dbf
Plane: limit pitch in transition to QLOITER and QLAND
...
when switching to QLOITER or QLAND when in forward flight, limit the
maximum pitch to prevent a sudden decelleration
2017-09-09 08:14:09 +10:00
Andrew Tridgell
b6809655d4
Plane: smooth the transition to LAND_FINAL in quadplanes
...
this makes for a much smoother change to LAND_FINAL, without a jerk as
it changes vertical speed
2017-09-09 08:14:09 +10:00
Andrew Tridgell
8411ac5c57
Plane: fixed a problem with descent rate in landings for quadplanes
...
use xy controller instead of xyz controller, which prevents calling z
controller twice, which led to poor height control
2017-09-09 08:14:09 +10:00
Andrew Tridgell
baee71a5b4
Plane: added GUIDED takeoff for quadplanes
...
this allows takeoff in GUIDED mode in the same way as copters
2017-09-09 08:14:09 +10:00
Michael du Breuil
1f5743e900
Plane: Report the primary magnetometer health rather then the first
2017-09-08 10:27:17 +10:00
Andrew Tridgell
a88e663191
Plane: adjust target altitude slowly in QRTL mode
...
this fixes a sudden throttle drop when starting the descent in QRTL mode
thanks to Marco for finding this issue
2017-09-07 07:22:13 +10:00
Andrew Tridgell
87e52a9f0f
Plane: prepare for 3.8.1 release
2017-09-03 19:31:30 +10:00
Peter Barker
0c7c2a41c4
Plane: handle param_request_list in GCS_MAVLINK base class
2017-08-30 15:54:47 +01:00
Peter Barker
dd4bffb4a2
Plane: handle param_set in GCS_MAVLINK base class
2017-08-30 15:54:47 +01:00
Peter Barker
0db1711b1f
Plane: move send_autopilot_request calls up to GCS base class
2017-08-30 15:54:46 +01:00
Peter Barker
c15c1b84a4
Plane: add constant structure holding firmware version
2017-08-30 15:54:46 +01:00
Peter Barker
0708130b5e
Plane: correct bad case fallthrough
2017-08-30 15:54:46 +01:00
Andrew Tridgell
6bfed07eae
Plane: updated USE_REV_THRUST docs
2017-08-30 08:46:53 +10:00
Michael du Breuil
8630037fd7
Plane: Parameterize the home altitude reset conditions
2017-08-29 13:09:46 -07:00
Andrew Tridgell
d541ac509f
Plane: removed TRIM_RC_AT_START parameter
...
this option caused a lot more problems than it solved, and is buggy
2017-08-29 07:35:49 +10:00
Andrew Tridgell
1a207c919b
Plane: fixed bug in TRIM_AUTO
...
fixed trim for differential spoilers
2017-08-29 07:35:49 +10:00
Andrew Tridgell
4124d371c9
Plane: fixed minacc and delay for launch
...
See
https://discuss.ardupilot.org/t/tkoff-thr-minacc-and-tkoff-thr-delay-doesnt-work-together/19928
2017-08-29 07:35:04 +10:00
Peter Barker
2861c1d06a
Plane: add ArduSub to list of SYSID_SW_TYPE
2017-08-24 19:50:38 +09:00
Peter Barker
212174bc0e
Plane: remove unused defines
2017-08-24 19:48:17 +09:00
Lucas De Marchi
44ffb67837
ArduPlane: use FALLTHROUGH define
...
When falling through on a case switch, allow to add an empty statement
with the correct attribute to tell the compiler this behavior is
intended.
2017-08-22 23:59:13 -07:00
Randy Mackay
c80a83322a
Plane: integrate simpler Log_Write_EKF
2017-08-23 11:19:14 +09:00
Peter Barker
8272fb8fa2
Plane: remove unused repeating events defines
2017-08-22 09:58:12 -07:00
Peter Barker
9732b19f04
Plane: move serial_control case to base class
2017-08-17 12:42:31 +01:00
Peter Barker
4321abd477
Plane: move play_tune and led_control handling to base class
2017-08-17 12:27:10 +01:00
Peter Barker
8eeae45300
Plane: use GCS_MAVLINK subclasses to handle set_mode
2017-08-16 11:58:10 +10:00
Michael du Breuil
833ec1336e
Plane: Expose the AFS instance to MAVLink
2017-08-15 15:14:56 +01:00
Peter Barker
1a665280e9
Plane: remove CLI
2017-08-14 10:23:50 +09:00
Peter Barker
c6b9c84d1f
Copter: remove CLI
2017-08-14 10:23:50 +09:00
Peter Barker
d33cd801a1
Plane: send gps messages as separate queued messages
2017-08-09 16:18:22 +01:00
Peter Barker
c3e86840b2
Plane: move sending of gps_raw up
2017-08-09 16:18:22 +01:00
Peter Barker
933cd7a44c
Plane: move sending of system_time up
2017-08-09 16:18:22 +01:00
Peter Barker
4aee416c1d
Plane: move sending of camera_feedback up
2017-08-09 16:18:22 +01:00
Peter Barker
9eb96886e5
Plane: move sending of meminfo up
2017-08-09 16:18:22 +01:00
Peter Barker
a9c866f574
Plane: use new retry_deferred method
2017-08-05 23:14:36 +01:00
Andrew Tridgell
3802e7bc3b
Plane: mark version as 3.8.1-dev
2017-08-05 17:19:32 +10:00
Andrew Tridgell
6e84210d1b
Plane: prepare for plane 3.8.0 release
2017-08-05 17:19:32 +10:00
Peter Barker
4cb94b80ee
Plane: move try_send_message queued_param_send up
2017-08-03 14:34:33 +01:00
Peter Barker
089f6f4650
Plane: move try_send_message send_hwstatus up
2017-08-03 14:33:37 +01:00
Peter Barker
fee9e83881
Plane: move try_send_message mission handling up
2017-08-03 14:24:47 +01:00
Peter Barker
a740c10dfe
Plane: move try_send_message compass message handling up
2017-08-03 14:24:46 +01:00
Peter Barker
50cbbc324b
Plane: base SYS_STATUS load average on variable loop rate
2017-08-01 19:39:27 +01:00
Andrew Tridgell
9b16836da5
Plane: cope better with more RC trim/min/max values
...
when min > trim we need to do RC scaling via rc_config. This loses the
ability to go beyond RC limits, but that can be coped with using
MANUAL_RCMASK
2017-08-01 08:25:32 +10:00
Andrew Tridgell
99df31f6ec
Plane: fixes from review
...
thanks Francisco
2017-08-01 08:25:32 +10:00
Andrew Tridgell
ea1a4bc176
Plane: improve px4_mixer handling of servo trim/min/max
2017-08-01 08:25:32 +10:00
Andrew Tridgell
cff692ca48
Plane: implement MANUAL_RCMASK
...
this replaces the functionality of the old "with input"
aileron/elevator functions, but in a much more flexible way. It means
that people who want to fly in MANAUL mode will have the ability to
have full control of trims and mixing using transmitter mixers if they
need that functionality
2017-08-01 08:25:32 +10:00
Andrew Tridgell
fedd2c558c
Plane: added AETR log message
...
this makes debugging mixers much easier
2017-08-01 08:25:32 +10:00
Andrew Tridgell
5d91e29cea
Plane: fixed px4_mixer for new function based mixing
...
this fixes the OVERRIDE_CHAN functionality to work correctly with the
new function based mixing code
It isn't a perfect match for ArduPilot mixing, but it is very close
for the key control surfaces, including mixed surfaces
2017-08-01 08:25:32 +10:00
Andrew Tridgell
0266168e69
Plane: removed old elevon and vtail mixers
...
now only use the function based mixing, and auto-convert on startup
2017-08-01 08:25:32 +10:00
Andrew Tridgell
178e7eca54
Plane: always setup target airspeed
...
this sets up a target airspeed even when flying without an airspeed
sensor. This is needed for quadplanes without airspeed sensors where
we use synthetic airspeed during the transition in TECS
2017-07-31 09:55:44 -07:00
Andrew Tridgell
909f109b3f
Plane: don't start a transition while disarmed
...
this can caused flooding of the GCS console while disarmed in FBWA
mode
2017-07-30 12:39:36 -07:00
Peter Barker
1cb6962f84
Plane: move common mavlink camera handling up
2017-07-28 14:32:58 +01:00
Peter Barker
2fb46a67dd
Plane: camera is responsible for taking distance-based-images and logging
2017-07-28 14:27:53 +01:00
Peter Barker
fbcd072d98
Plane: move gps inject handling up to GCS_MAVLINK
2017-07-27 12:03:25 +01:00
Patrick José Pereira
60834e9af0
Plane: Allow a second activation of parachute
...
The hardware can fail in the first activation,
this patch allow a second chance to active the parachute successfully.
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2017-07-26 17:51:34 +01:00
Peter Barker
87af817893
Plane: handle common GPS messages in base GCS_MAVLINK class
2017-07-25 14:00:45 +01:00
Peter Barker
fa39f315c6
Plane: move starting of new logs into DataFlash
2017-07-19 16:37:28 +01:00
Peter Barker
ea892d278f
Plane: remove MSG_STATUSTEXT entirely
2017-07-18 16:12:59 +01:00
Michael du Breuil
f87a69dcf2
Plane: Throttle based landing aborts should ask the landing library
...
Throttle based aborts should be requesting a go around from AP_Landing.
This was missed in the initial port.
2017-07-17 08:43:50 -07:00
Peter Barker
7f0cb82797
Plane: move handling of PREFLIGHT_SET_SENSOR_OFFSETS up
2017-07-17 14:17:19 +01:00
Peter Barker
6047026b11
Plane: move handling of MAG_CAL command longs up
2017-07-17 14:17:19 +01:00
Peter Barker
2b6752e0b4
Plane: move MAV_CMD_START_RX_PAIR handling to base class
2017-07-17 14:17:19 +01:00
Peter Barker
7042d3e9c9
Global: all vehicles get AP_Relay and AP_ServoRelayEvent libraries
2017-07-17 00:06:31 +01:00
Peter Barker
36eab56178
Plane: move mavlink support for servo/relay up
2017-07-16 23:56:00 +01:00
Peter Barker
3af52d9db3
Plane: add common handling of mavlink command messages
2017-07-16 23:56:00 +01:00
Michael du Breuil
b8e6ad7476
Plane: Document loop max time as being in microseconds
2017-07-15 17:27:04 +09:00
Peter Barker
983686745e
Plane: move rally-point handling up
2017-07-14 01:28:05 +01:00
Peter Barker
a250f47f13
Plane: remove unneeded telemetry_delayed parameter
2017-07-12 17:01:36 +01:00
Peter Barker
c9c4b31e99
Plane: move handling of incoming statutext messages up
2017-07-12 16:52:24 +01:00
Peter Barker
c058fba5ac
Plane: eliminate GCS_MAVLINK::send_statustext_all
2017-07-11 23:53:53 +01:00
Peter Barker
592729733e
Copter: eliminate GCS_MAVLINK::send_statustext_all
2017-07-11 23:53:53 +01:00
Peter Barker
1be52495f1
Plane: eliminate global static GCS_MAVLINK::send_home_all
2017-07-11 23:48:39 +01:00
Peter Barker
d850feb75f
Plane: move common mission handling up to GCS_MAVLINK
2017-07-11 23:45:17 +01:00
Peter Barker
250f315678
Plane: eliminate gcs_send_mission_item_reached wrapper
2017-07-11 23:45:16 +01:00
Peter Barker
3b0a7703c4
Plane: eliminate gcs_send_message wrapper
2017-07-11 23:45:16 +01:00
Peter Barker
5a8f01c19c
Plane: use send_text method on the GCS singleton
2017-07-09 17:17:29 -04:00
Peter Barker
685706952c
ArduPlane: use Notify singleton for sending statustext
2017-07-09 17:17:29 -04:00
Peter Barker
5b3b61a2e4
Plane: move GCS functions up to superclass GCS
2017-07-07 16:18:37 +01:00
Andrew Tridgell
1d626db3b1
Plane: use scaled outputs for AFS failsafe
...
we need to use scaled outputs so that derived outputs (such as elevons
and vtail) have a valid input to use
2017-07-04 07:59:28 +10:00
Peter Barker
923b201025
Plane: send servos outputs after flaperon update
2017-07-04 07:59:28 +10:00
Peter Barker
38921c4f1a
Plane: correct AFS terminate for rcin/servos split
2017-07-04 07:59:28 +10:00
Eugene Shamaev
b95ebadf8b
ArduPlane: move of CAN parameters into separate group
2017-07-03 11:44:32 +01:00
Andrew Tridgell
b2cd5f5c06
Plane: release 3.8.0beta5
2017-07-03 11:39:48 +10:00
Andrew Tridgell
d3f9afd4e7
Plane: fixed auto-adjustment of flaperon trim
2017-07-03 11:17:42 +10:00
Andrew Tridgell
2cb511c049
Plane: deprecate old aileron_with_input and elevator_with_input
...
these have very rarely been used and don't work well with new trimming
mechanisms. Now treat them as ordinary ailerons/elevators
2017-07-03 11:17:42 +10:00
Andrew Tridgell
51b39ea3a1
Plane: removed ancient "mix_mode" type elevon mixing
...
this has been deprecated for a long time
2017-07-03 11:17:42 +10:00
Andrew Tridgell
725244ff8a
Plane: implement new TRIM_AUTO functionality
...
this fixes TRIM_AUTO for new scaled output approach to servo functions
2017-07-03 11:17:42 +10:00
Andrew Tridgell
984e887d1d
Plane: changed differential spoilers to scaled outputs
...
this matches new elevon, vtail and flaperon code
2017-07-03 11:17:42 +10:00
Andrew Tridgell
c9e4423997
Plane: re-implement flaperons
...
implement as scaled output instead of PWM output
this will break some peoples setups, but gives much easier setup and
more consistent behaviour
2017-07-03 11:17:42 +10:00
Peter Barker
1ca5f243a5
Plane: check dataflash to see if we should log backend gps messages
2017-06-29 15:43:38 +01:00
Peter Barker
949e07c7e3
Plane: use DataFlash should_log to determine raw IMU logging
2017-06-29 15:26:27 +01:00
Peter Barker
88a7167cb9
Plane: move should_log check of log bitmask into DataFlash
2017-06-29 15:26:27 +01:00
Peter Barker
5b70b688cb
Plane: handle knowledge of in_log_download in DataFlash
2017-06-27 03:10:43 +01:00
Peter Barker
60ebd099bd
Plane: move send-logs-via-mavlink code into DataFlash
2017-06-27 03:10:43 +01:00
Michael du Breuil
8691eae679
Plane: Handle NAV_CONTROLLER_OUTPUT.wp_dist overflowing
2017-06-20 15:41:50 +01:00
Andrew Tridgell
0b40e853c9
Plane: call set_likely_flying()
2017-06-20 09:44:44 +10:00
Peter Barker
ceec44350f
Plane: move MAVLINK_MSG_ID_REMOTE_LOG_BLOCK_STATUS handling up
2017-06-17 15:07:48 +01:00
Michael du Breuil
92cdb54176
Plane: Fix a fly away when aborting a landing
...
DO_LAND_START -> LAND waypoints in sequence would cause a perpetual abort state
due to the sticky nature of the abort states. If we restart a landing on
purpose while doing an abort, then we can move onto trying to land again.
2017-06-17 09:10:27 +10:00
Peter Barker
30dfd32b87
Plane: stop using in_mavlink_delay as a proxy for disabling logging
2017-06-16 17:07:48 +01:00
Peter Barker
b57a4e9685
Plane: call dataflash should_log method
2017-06-16 17:07:48 +01:00
Michael du Breuil
1d03732ac5
Plane: Remove redundant status text on MAV_CMD_DO_GO_AROUND
2017-06-16 11:49:52 +09:00
Pierre Kancir
5d0972f589
Arduplane: fix implicit cast to double warning in quadplane
2017-06-14 12:40:47 +01:00
Peter Barker
c6beb3a867
Plane: simplify dataflash initialisation
2017-06-14 12:20:29 +01:00
Peter Barker
4dc241fd22
Plane: StartUnstartedLogging replaces logging_started/start_logging
2017-06-11 20:34:12 +01:00
Peter Barker
927cc75843
Plane: simplify should_log (NFC)
2017-06-11 20:34:12 +01:00
Andrew Tridgell
1455c23230
Plane: fixed docs for tailsitter
2017-06-10 18:41:34 +10:00
Pierre Kancir
d5cc1e64ed
GCS_Common: rename send_rangefinder to send_rangefinder_downward
2017-06-08 01:32:04 +01:00
Pierre Kancir
0bc9d294fb
ArduPlane: change rangefinder msg for common one
2017-06-08 01:31:52 +01:00
Pierre Kancir
9a121dc7c4
ArduPlane: add DISTANCE_SENSOR support
2017-06-08 01:31:52 +01:00
Dr.-Ing. Amilcar Do Carmo Lucas
ccee841578
Plane: NFC SYS_NUM_RESETS is a read-only variable
2017-06-07 19:53:03 +09:00
Mark Whitehorn
6607dafc66
ArduPlane: change is_tailsitter() to tailsitter_active()
2017-06-07 20:21:49 +10:00
Mark Whitehorn
53b82d1d4d
ArduPlane: add comments on tailsitter pitch limits
2017-06-07 20:21:49 +10:00
Mark Whitehorn
65755454e0
ArduPlane: set tailsitter VTOL pitch limits using only Q_ANGLE_MAX
2017-06-07 20:21:49 +10:00
Dr.-Ing. Amilcar Do Carmo Lucas
14b214eb9b
Plane: remove FS parameters default values macros.
...
They just add an un-necessary level of indirection in the code. The parameters are run-time configurable now.
2017-06-07 17:46:39 +10:00
Michael du Breuil
87c076da4d
ArduPlane: Fix missing break in GCS_MAVLink
...
Was causing AOA_SSA to send a landing message as wel
2017-06-05 13:12:01 +09:00
Randy Mackay
f7e830cfad
Plane: pixhawk mixer supports motors 9 to 12
2017-05-27 14:21:13 +09:00
Dr.-Ing. Amilcar Do Carmo Lucas
405e0bb9d9
Plane: Add missing @RebootRequired: True
2017-05-27 01:55:55 +01:00
Paulo Neves
a45dd30c1d
Plane: Add MAV_CMD_DO_SET_CAM_TRIGG_DIST support.
2017-05-25 09:35:22 +09:00
Michael du Breuil
19a5475195
Plane: Send landing messages
2017-05-24 15:22:27 -07:00
Dr.-Ing. Amilcar Do Carmo Lucas
2f5f8eb323
Plane: Use SI units conventions in parameter units
...
Follow the rules from:
http://physics.nist.gov/cuu/Units/units.html
http://physics.nist.gov/cuu/Units/outside.html
and
http://physics.nist.gov/cuu/Units/checklist.html
one further constrain is that only printable (7bit) ASCII characters are allowed
2017-05-17 18:07:25 +10:00
Michael du Breuil
92d505598b
ArduPlane: Poll AP_Landing for fly forward information
2017-05-15 14:50:29 -07:00
Andrew Tridgell
92f88e9b33
Plane: fixed climb rate for quadplanes in CRUISE
...
the high loop rate of quadplanes led to less than 1cm/loop change in
height, which got truncated to zero. Adjusting height at 10Hz fixes
that.
Thanks to Marco for reporting this!
2017-05-10 08:03:23 +10:00
Andrew Tridgell
6eaad59115
Plane: improve vectored tailsitter takeoff
...
this gives extra pitch input when taking off a vectored tailsitter,
allowing the motors to point straight up for easy takeoff
thanks to Leonard for the idea!
2017-05-07 09:10:44 +10:00
Andrew Tridgell
a46799d34e
Plane: removed AP_Airspeed from vehicle code
2017-05-04 22:59:02 -07:00
André Kjellstrup
21b8d3cb3d
Plane: Removed scary autotakeoff message.
...
This message does not provide anything useful, but is rather scary to
get moments before launch.
If it's somehow meant to provide useful information, or an action "Timer
interrupted AUTO" should be replaced by something else.
2017-05-04 22:37:32 -07:00
Peter Barker
378015691b
Plane: stop appending lf to PERF message
2017-05-01 16:21:55 +01:00
Peter Barker
084242cf03
Plane: move init of DataFlash references into vehicle init
...
It is possible to start a log before the existing codepath is crossed.
2017-05-01 15:04:34 +01:00
Andrew Tridgell
708b483d77
Plane: prepare for 3.8.0beta5
2017-05-01 20:30:32 +10:00
Andrew Tridgell
2706c9d57a
Plane: use common send_queued_parameters()
2017-05-01 14:36:10 +10:00
Andrew Tridgell
351304ebcb
Plane: don't set fly-forward when transitioning
...
when quad motors are providing assistance don't see the fly-forward
flag in the AHRS. This will lower the chance of EKF yaw confusion
2017-05-01 14:27:45 +10:00
Andrew Tridgell
3eeff938b0
Plane: call BoardConfig.init_safety() at end of startup
...
this fixes a bug where motors can start on soft reboot
2017-04-30 21:47:04 +10:00
Mark Whitehorn
dc10675965
ArduPlane: suppress differential thrust when throttle is zero
...
this prevents motors from spinning when disarming in FBWA
2017-04-28 16:08:50 -07:00
Andrew Tridgell
5a57aafb98
Plane: reduce pitch demand on takeoff on roll error
2017-04-28 16:34:33 +10:00
Andrew Tridgell
954905e0eb
Plane: allow battery failsafe with usb connected
...
some people connect USB to allow connections from a companion
computer. The arming check is sufficient to prevent unwanted battery
failsafes when bench testing
2017-04-28 16:33:49 +10:00
Andrew Tridgell
888edcd709
Plane: fixed duplicate include of AP_ADC library
2017-04-27 18:32:26 +10:00
Andrew Tridgell
7ea0f65590
Plane: removed incorrect comment
2017-04-24 16:56:23 +10:00
Andrew Tridgell
06b0742481
Plane: fixed jump in qhover on takeoff
...
Z controller PID is from -1 to 1
thanks to Leonard for spotting this
2017-04-24 16:55:41 +10:00
Andrew Tridgell
b9debba509
Plane: make ground test easier for tilt
2017-04-24 16:55:41 +10:00
Andrew Tridgell
76870f8e01
Plane: improve fast/slow tilt in ground tests
...
when disarmed use the slow tilts so users can judge the rates it will
use in flight
2017-04-24 16:55:41 +10:00
Andrew Tridgell
aab20317a0
Plane: fixed position control in QLAND_FINAL
2017-04-24 16:55:41 +10:00
Andrew Tridgell
b1f1ace736
Plane: support vectored yaw tiltrotors
...
this adds support for tiltrotors which control yaw by vectoring the
forward motors. This avoids the need for the rear motor on a
tilt-tricopter to have a tilt servo
2017-04-24 16:54:41 +10:00
Andrew Tridgell
fedabd1ace
Plane: added logging of quadplane desired yaw
...
makes analysis of takeoffs easier
2017-04-24 16:52:16 +10:00
Andrew Tridgell
2d9c3e3d93
Plane: added EKF yaw reset handling to quadplane
...
this follows the implementation from copter. Thanks to Leonard for the
suggestion
2017-04-24 16:52:16 +10:00
Andrew Tridgell
516bf26719
Plane: fixed QRTL change when coming from loiter
...
the nav controller can think we have already reached the loiter target
if we were last in a LOITER when we switch to RTL. In that case it
would switch to QRTL immediately
found by Leonard (thanks!)
2017-04-24 16:28:59 +10:00
Andrew Tridgell
be1b50d6e2
Plane: support auto trim for separate elevon and vtail channels
...
this supports SERVO_AUTO_TRIM=1 for elevons and vtails setup using the
new separate functions
2017-04-24 16:26:08 +10:00
Andrew Tridgell
b4ffcfa6bd
Plane: added support for elevon and vtail servo functions
...
these make trimming and limiting servo movement easier
2017-04-24 16:26:08 +10:00
Peter Barker
b5b8620d04
Plane: log GPS detection state to DF on log startup
2017-04-23 21:04:17 +01:00
Eugene Shamaev
ca84ab36be
Plane: AOA and SSA estimations are added to parameters and data logs
2017-04-19 20:48:42 +10:00
Andrew Tridgell
88e02c7b35
Plane: log the throttle mix for quadplane copter control
2017-04-19 09:08:43 +10:00
Andrew Tridgell
8e3f8f47c8
Plane: tilt motors fast in final stages of quadplane transition
...
when transition of tilt quadplane has reached the stage where the tilted
motors are used solely for fwd thrust and rear motors are off we should
move the tilt to full forward rapidly
2017-04-19 09:08:14 +10:00