Matt
29adf300ee
Tools: update default Solo parameters running AC3.5
2017-04-18 11:00:26 +09:00
Randy Mackay
835aa56777
Tools: intel aero params enable failsafes
2017-04-15 18:39:13 +09:00
Andrey Kolobov
2ed63d24bd
XPlane: adding airfoils required to for XPlane
...
needed to load some of the RC sailplane models used for SITL
2017-04-10 19:11:24 +10:00
Lucas De Marchi
2ff720f99f
Frame_params: add default params for Intel Aero RTF
2017-03-24 12:06:19 +11:00
Randy Mackay
e3bca10e9a
Tools: fix Solo param file name
2017-03-14 11:36:08 +09:00
Randy Mackay
6e47eaf3c2
Tools: initial Solo default params
...
These are not perfect but it's a start
2017-03-14 11:10:19 +09:00
Randy Mackay
c9ff028ec3
Tools: update IRIS param file for AC3.5
2017-02-28 16:43:09 +09:00
Randy Mackay
cc67335b26
Tools: update EnRoute frame parameters
2017-02-28 14:09:41 +09:00
Julien Beraud
a5523a4b94
Frame_Params: Remove unexisting param
...
FRAME has disappeared and causes a crash at startup
2017-01-23 21:23:16 +11:00
Mathieu OTHACEHE
4daa4e9df9
Tools: remove deleted parameters
...
RCx_REV and SERVO_RNG_ENABLE no longer exists, they need to be erased
from param files.
2017-01-13 20:19:30 +11:00
Randy Mackay
07e5b43132
Tools: add FRAME_CLASS to bebop parameter files
2017-01-13 07:46:27 +09:00
Andrew Tridgell
7c058c922f
Tools: removed ARSPD_ENABLE parameters
2016-12-05 16:51:49 -08:00
Randy Mackay
3576d06638
Tools: EX700 proximity ignores legs
2016-11-26 11:39:26 +09:00
Randy Mackay
7e031262c3
Tools: remove duplicate from Bebop2 params file
2016-11-07 09:54:58 +09:00
Randy Mackay
d9e476c96f
Tools: Bebop2 param get radio failsafe
...
put params in alphabetical order
2016-11-07 09:53:37 +09:00
Randy Mackay
fb47480b51
Tools: Bebop params get ground effect compensation
...
Also put in alphabetical order
2016-11-07 09:52:41 +09:00
Randy Mackay
b34c14ef67
Tools: update EX700 parameter file
...
swapped around lidar, TX1 and SF40c input channels
2016-11-05 17:10:40 +09:00
Randy Mackay
c19ef757ef
Tools: add IRIS AC3.4 params file
2016-11-03 12:38:56 +09:00
Mathieu OTHACEHE
5e42800b5e
Disco: add LED support
...
Use RGBLed generic implementation to support Disco LED.
2016-10-26 11:56:11 -03:00
Francisco Ferreira
79cb4ea595
Tools: set Disco battery capacity in frame parameters
2016-10-24 09:24:11 -03:00
Francisco Ferreira
832fec68b7
Tools: set Bebop battery capacity in frame parameters
2016-10-24 09:24:11 -03:00
Mathieu OTHACEHE
01804063f6
Disco: set SCHED_LOOP_RATE to 200
...
Video stabilization on stock firmware requires main loop to run at
200Hz.
2016-10-20 09:07:54 -03:00
Mathieu OTHACEHE
6ccbbb0074
Disco: set WP_LOITER_RAD to 30
...
Use the same value for LOITER radius as in stock autopilot.
2016-10-20 09:07:54 -03:00
Mathieu OTHACEHE
352551a239
Bebop2: Remove CR in param file.
...
Remove CR in Parrot_Bebop2.param line endings.
2016-10-20 09:07:07 -03:00
Andrew Tridgell
227bd3d13c
Frame_params: enabled FS_THR_ENABLE on Bebop and Bebop2
2016-10-18 21:00:13 +11:00
Andrew Tridgell
fe3d57b19c
Frame_params: fixed scaling errors in Bebop parameters
2016-10-18 08:28:58 +11:00
Andrew Tridgell
16bd04ba7e
Tools: update frame parameters for Disco
...
use new SERVO_RNG_ENABLE option. This makes tuning independent of the
users R/C settings
2016-10-15 16:59:37 +11:00
Andrew Tridgell
19d580d60f
Disco: adjust default Disco parameters
2016-09-16 19:31:28 +10:00
Andrew Tridgell
dd3d5152f6
Frame_params: added more Disco info
2016-09-15 18:17:09 +10:00
Andrew Tridgell
94460949e1
Frames: added Parrot Disco parameters
2016-09-15 18:09:35 +10:00
Randy Mackay
e4efa4c07c
Tools: EnRoute EX700 param file gets flow orientation
2016-08-31 10:34:26 +09:00
Randy Mackay
4fbc686e68
Tools: EnRoute EX700 params get SF10b
2016-08-29 21:06:50 +09:00
Randy Mackay
28715106d6
Tools: update Bebop2 parameter gains
2016-08-26 09:12:48 +09:00
Randy Mackay
29e18dba5b
Tools: add battery failsafe to EnRoute EX700 param file
2016-08-25 13:07:56 +09:00
Randy Mackay
65ee71075c
Tools: set GND_EFFECT_COMP for Bebop2 params
2016-08-09 16:19:53 +09:00
Randy Mackay
650d6756bf
Tools: update EnRoute EX700 parameter defaults
2016-08-05 16:26:36 +09:00
Randy Mackay
3b86ef71ca
Tools: update EnRoute EX700 parameters
2016-08-04 16:56:46 +09:00
Randy Mackay
de24d2ca3b
Tools: add EnRoute EX700 frame parameters
2016-08-04 14:37:14 +09:00
Julien Beraud
fdb43fdc6a
Frame_Params: fix param name for bebop
...
Change-Id: Id1c16e11e68f0004019afc885acf0e0f119b78b7
2016-07-15 12:25:17 -03:00
Julien Beraud
3897e03d39
Frame_params: fix Bebop param names
...
Broken by AP_Motors refactoring
2016-05-04 10:09:31 +09:00
Randy Mackay
e78595bf48
Frame_Params: remove defaults from Bebop2 params
...
Removed parameter values that should already be these values by default on a fresh install
2016-01-23 11:42:13 +09:00
Julien BERAUD
90d266698d
Frame_Params: Bebop 2 tuning by Leonard
2016-01-22 13:58:46 -02:00
Julien BERAUD
b8aef20ee8
Frame_Params: Fix bebop compass orient
...
Without COMPASS_EXTERNAL set to 1, COMPASS_ORIENT wasn't taken
into account, leading to bad data
2016-01-13 19:17:27 -02:00
Julien BERAUD
e22fe34259
Params: add arming check for bebop
...
Taken from bebop 2
2015-12-22 16:50:27 -02:00
Randy Mackay
4f612f5d69
Frame_params: Bebop2 parameters
...
Rate PIDs are taken from original bebop which are slightly too high
2015-12-14 11:51:34 +09:00
Randy Mackay
8be0f9371f
Frame_params: update recommended Bebop parameters
2015-12-14 11:49:00 +09:00
orlando3d
6d266d2063
Update 3DR_X8-M_RTF.param
2015-10-18 09:27:54 +09:00
orlando3d
7c0239e59c
Update 3DR_X8+_RTF.param
2015-10-18 09:27:51 +09:00
orlando3d
11ae5a64d0
Update 3DR_Iris+.param
2015-10-18 09:27:49 +09:00
Leonard Hall
041dd3c855
Frame: new Bebop default parameters
2015-10-08 12:21:14 +09:00
Leonard Hall
1f287da70b
Tools: first draft Parrot Bebop parameters
2015-09-12 12:53:43 +09:00
Randy Mackay
08466d34e8
Frame: add SToRM32 gimbal parameters
...
These parameters can be used to configure ardupilot to control a SToRM32
3-axis gimbal attached to Pixhawk Telem2 port using the MAVLink
protocol. Gimbal Tilt is controlled using the RC6 input
2015-06-02 14:49:40 +09:00
Randy Mackay
cebd578403
Frame Params: remove unused Advanced, Beginner
2015-04-21 10:44:26 +09:00
Randy Mackay
f225558dbd
IRIS params: update RATE_PIT_IMAX to 1000
2015-02-02 17:59:52 +09:00
Craig Elder
324473a15b
Frame_params: Updating 3DR_X8_RTF.param for Copter 3.2
2014-11-14 18:03:29 -08:00
Craig Elder
5ea947de2f
Frame_params: Updating 3DR_X8-M_RTF for Copter 3.2
2014-11-14 17:56:56 -08:00
Craig Elder
e3d6b25301
Frame_params: Updated 3DR_X8+_RTF
2014-11-14 13:52:38 -08:00
Craig Elder
5df3d24c77
Frame_params: 3DR_X8+_RTF.param
...
Adding param file for 3DR X8+
2014-10-28 19:33:44 -07:00
Craig Elder
df16dd67d2
Frame_params: 3DR_Iris+.param
...
Add GPS_HDOP_GOOD
2014-10-23 17:05:08 -07:00
Craig Elder
adf741b959
Frame_params: Updated 3DR_X8-M_RTF.param
2014-10-07 15:00:57 -07:00
Craig Elder
5b23f81e2b
Frame_params: Updating 3DR_X8-M_RTF.param
2014-10-06 16:07:49 -07:00
Craig Elder
5d7ec98d7a
Frame_params: Adding 3DR_X8-M_RTF.param
2014-10-06 15:44:35 -07:00
Craig Elder
41ce8c2abd
Frame_params: 3DR_Iris+
...
Decreased ATC_RATE_RP_MAX to 18000
2014-10-06 12:17:52 -07:00
Craig Elder
ab46f2d2fe
Frame_params: 3DR_Iris+ reduced WP_NAV to 650
2014-09-24 13:43:52 -07:00
Craig Elder
3f687733e6
Frame_params: added 3DR_AERO_M.param
2014-09-17 18:48:48 -07:00
Craig Elder
da66c7df36
Frame_params: 3DR_Aero_RTF.param Changed tuning
2014-09-17 18:46:52 -07:00
Craig Elder
4c38f51337
Frame_Parameters: 3DR_Iris+ changed mode switch configuration
2014-09-16 00:12:40 -07:00
Craig Elder
d26173bf81
Frame_params: Updated 3DR Iris+
2014-09-11 23:05:28 -07:00
Craig Elder
6e79ab8478
Frame_params: Added Frsky telemetry to 3DR_Iris+.param
2014-09-10 13:30:59 -07:00
Craig Elder
5fae3638dc
Frame_params: Updated 3DR_Iris+
2014-09-10 10:54:06 -07:00
Craig Elder
a6db3586f6
Frame_params: Removed Iris with 3 Position Mode Switch.param
2014-09-09 18:55:34 -07:00
Craig Elder
e6b2726738
Frame_params: 3DR_Iris+.parm
2014-09-09 12:36:04 -07:00
Craig Elder
2f2665c022
Frame_params: Updated 3DR_Iris+.param
2014-09-09 00:36:06 -07:00
Craig Elder
df82e0accc
Frame_Params: Added 3DR Iris+
2014-09-08 12:40:10 -07:00
Craig Elder
a57818dfc8
Frame_parameters: Updated Iris with 3 Position Mode Switch
2014-09-04 11:49:02 -07:00
Craig Elder
21e4144b29
Frame_params: Updated Iris with 3 Position Mode Switch
2014-09-03 16:47:18 -07:00
Craig Elder
0ab3e40e92
Frame Parameters: Updated Mode Switch order
2014-08-21 13:34:42 -07:00
Craig Elder
27a7ea2766
Frame Parameters: 3DR Aero RTF
2014-08-18 15:33:34 -07:00
Craig Elder
b0d26d9ace
* Frame Parameters: 3DR AERO RTF
...
Updated RLL2SRV_P parameter
2014-08-15 12:18:49 -07:00
Craig Elder
926d57698d
Frame Parameters: 3DR AERO RTF
...
Updated 3DR AERO RTF parameters
2014-08-14 18:37:29 -07:00
Craig Elder
7d152cbbf2
Frame_params: Added Iris with 3 Positon Mode Switch.param
2014-07-29 17:27:37 -07:00
Craig Elder
972a2403ed
Frame_params: Added Iris with Front Mount Go Pro
2014-05-19 16:47:41 -07:00
Craig Elder
32a1fac612
Frame_params: Removed TRIM_AUTO,1
2014-05-06 14:53:53 -07:00
Kevin Hester
25f9a469e6
Tools: fixup line endings
2014-04-15 15:55:15 +09:00
Craig Elder
be51a68701
3DR_Aero_RTF: Changed the name from 3DR_Skywalker_RTF
2014-04-08 00:19:18 -07:00
Craig Elder
428dcdb817
Frame_params: Updated Iris.param
2014-03-19 19:49:27 -07:00
Craig Elder
2131d9923f
Frame_params: Added Iris with Tarot Gimbal
2014-03-19 19:48:44 -07:00
Craig Elder
7be2cea42f
Frame_params: Adding 3DR_Rover.param
2014-03-18 13:27:27 -07:00
Craig Elder
0a33e69787
Frame_params: Updated tilt angles for Tarot Gimbals
2014-03-08 11:03:25 -08:00
Craig Elder
5a80ae0f61
Frame_params: Updated 3DR Iris for Tarot Gimbal
2014-03-07 18:27:13 -08:00
Craig Elder
74bd5f9e40
Frame_params: Updated 3DR Y6B for Tarot Gimbal
2014-03-07 18:26:07 -08:00
Craig Elder
70ca616696
Frame_params: Updated 3DR X8 for Tarot Gimbal
2014-03-07 18:23:00 -08:00
Craig Elder
df51b3025b
Frame_params: Updated 3DR Quad for Tarot Gimbal
2014-03-07 18:22:09 -08:00
Craig Elder
2869d6fd08
Frame_Parameters: Added Skywalker
2014-03-07 18:20:47 -08:00
Craig Elder
aa5a098adb
Iris:parameter adjustments
2014-02-13 14:11:55 -08:00
Craig Elder
f2a318e057
Iris: Updated Parameter file
2014-02-12 21:16:00 -08:00
Craig Elder
e334e92e27
Iris:Updated Parameters
2014-02-12 19:46:00 -08:00
Craig Elder
32f5a1ac94
Iris: Updated gimbal configuration
2014-02-07 18:29:51 -08:00
grant3DR
31f6e3c63b
Update 3DR_X8_RTF.param
...
Updated RATE_PIT_(P,I,D), RATE_RLL_(P,I,D), RATE_YAW_(P,I,D), THR_MID, and STB_(PIT, RLL, and YAW) to autotuned param values
Grant Lieberman
3D Robotics
2014-02-07 22:32:48 +09:00
Randy Mackay
058e058487
Frame Params: 3dr tarot gimbal params
2014-02-04 21:52:25 +09:00