Andy Piper
f38faaae99
AP_HAL_ChibiOS: iFlight Blitz H7 Pro
2024-05-01 17:19:05 +10:00
Daniel Field
33892aa049
SITL: modifications to lift in SIM_StratoBlimp ( #3 )
...
* Update SIM_StratoBlimp.cpp
* Update SIM_StratoBlimp.h
2024-05-01 15:45:22 +10:00
Peter Barker
c08d982c0c
SITL: populate speed accuracy uBlox messages from SITL parameters
2024-05-01 10:19:58 +10:00
Andrew Tridgell
68b58d5435
AP_Compass: workaround hardware bug in IST8310 whoami
...
the WAI (whoami) register is writeable. Not only is it writeable, but
the written value is persistent across a power cycle. You have to
remove power for about 30s for it to finally go back to the right
default value of 0x10
this makes using WAI as a test for finding a IST8310 problematic. The
best we can do is send a soft reset which will reset it to default for
us to then check
2024-05-01 09:24:54 +10:00
Andy Piper
41fd7c726e
AP_IOMCU: allow up to 16 channels of servo data to be sent to the iomcu
2024-05-01 08:21:01 +10:00
Peter Barker
dce3a41657
SITL: add description for SIM_BARO_DRIFT
2024-04-30 16:39:32 +10:00
Peter Barker
527e621a57
AP_Baro: accumulate altitude drift in place of raw calc
...
currently we set drift based on current boot time. If you want to introduce it at some stage in a flight the baro alt will suddenly jump based on how long you've been up.
Instead, accumulate a delta
2024-04-30 16:39:32 +10:00
Andy Piper
25b10fb8c4
AP_HAL: make NeoPixel high-low proportions match for 0 and 1
2024-04-30 11:00:30 +10:00
tanghongkai
0dac7d5cfe
AP_Logger: add support to w25n02kv
2024-04-30 10:58:12 +10:00
Ryan Friedman
b81a5deefe
AP_ExternalAHRS: Add pre-arm for misconfigured EAHRS_SENSORS and GPS_TYPE
...
* This catches when there's a mismatch of GPSx_TYPE and EAHRS_SENSORS
when GPS is enabled
* Before this pre-arm, failure to set GPS_TYPE2 to 21 (ExternalAHRS)
resulted in silent rejection of the data in AP_GPS because the default
is off
* And fix a little logging bug
Signed-off-by: Ryan Friedman <ryanfriedman5410+github@gmail.com>
2024-04-30 09:18:46 +10:00
Iampete1
1b1ce9530c
AP_Common: add `get_distance_NED_alt_frame` method
2024-04-30 08:03:39 +09:00
Iampete1
1cdff47246
AP_Mission: add support for DO_RETURN_PATH_START
2024-04-30 08:03:39 +09:00
Brad Bosch
e8d2097ec4
GCS_MAVLink: Avoid serial passthrough buffer exhausted/lost data
...
Just don't read more than we can write.
2024-04-29 20:06:43 +10:00
Hubert
890a83166d
hwdef: Fix MicoAir743 internal compass rotation
2024-04-29 07:43:57 +10:00
Peter Barker
0a3ff72fd8
AP_Baro: correct placement of field elevation #endif
...
wind compensation and field elevation should be unrelated
2024-04-28 18:02:29 +10:00
Andrew Tridgell
202cc6ae9d
SITL: fixed param meta-data name
2024-04-28 06:48:25 +10:00
Andrew Tridgell
4bb5a9ac52
HAL_SITL: link in StratoBlimp
2024-04-27 22:03:05 +10:00
Andrew Tridgell
1976f3d2d6
SITL: added StratoBlimp simulator
2024-04-27 22:03:05 +10:00
Iampete1
0a3bdbfdc9
Filter: NotchFilter: return NaN for `logging_frequency` if not initialised
2024-04-24 17:30:35 +10:00
Hubert
84900473de
AP_HAL_ChibiOS: added NxtPX4v2
...
Update README.md
Update NxtPX4v2_BackView
Hwdef Remove: define HAL_GPIO_LED_OFF 0
2024-04-24 13:57:48 +10:00
aditya
9abcd6b7ca
AP_ESC_TELEM: solved the logical error in grouping of escs into 4
2024-04-24 08:10:02 +09:00
Paul Riseborough
3c8b3be7a7
AP_NavEKF3: Change yaw source to stop compass use when calibrating
2024-04-23 15:19:56 +09:00
Andrew Tridgell
fe42171268
AP_GPS: make get_RelPosHeading boolean
2024-04-23 10:32:43 +10:00
Hubert
d1d71db8a0
AP_HAL_ChibiOS: add hwdef MicoAir743
...
Update README.md
Co-Authored-By: Henry Wurzburg <hwurzburg@yahoo.com>
2024-04-23 09:56:23 +10:00
Henry Wurzburg
4d7e4d1ca9
Revert "hwdef: bdshot version of the MatekF765-SE"
...
This reverts commit ac86bd8d21
.
2024-04-23 09:52:01 +10:00
Michael du Breuil
ff7a215dd0
AP_Baro: Do not cache EAS2TAS conversions
...
Caching this introduces discontinuities in TECS, as the step change
modifies the target speed demand.
2024-04-23 09:32:27 +10:00
Iampete1
30fdae880f
SITL: allow disabling MAVLink simstate messages
2024-04-23 09:16:55 +10:00
Iampete1
64b57de559
AP_HAL_SITL: call `_sitl->set_stop_MAVLink_sim_state()` when alocating elrs
2024-04-23 09:16:55 +10:00
Iampete1
700804a015
SITL: add ELRS simulator
2024-04-23 09:16:55 +10:00
Iampete1
cbd5bcb694
AP_HAL_SITL: SITL_State_common: add elrs and pass portnumber in `create_serial_sim`
2024-04-23 09:16:55 +10:00
Iampete1
b0ceaa7610
AP_HAL_SITL: use DataRateLimit helper
2024-04-23 09:16:55 +10:00
Iampete1
92adcb14e1
AP_HAL: utility: Add Data Rate Limit helper
2024-04-23 09:16:55 +10:00
Daniel Li
f47998ed8a
hwdef: Fix Aocoda-RC H743Dual motor 5-8 mis-labeled issue
2024-04-22 12:03:33 +10:00
Ferruccio Vicari
1c104557b7
AP_Motors: fix heli yaw behavior in autorotation
2024-04-18 11:13:50 -04:00
Peter Barker
c5f4fe9a8a
AP_Baro: remove Baro accumulate API
...
no backend actually needs to be prodded, everything is done on timers
2024-04-18 09:19:20 +10:00
Tatsuya Yamaguchi
8874c1a560
AP_HAL_SITL: added HEXA X
2024-04-18 08:25:41 +10:00
Peter Barker
bf63729d31
SRV_Channels: gate method on scripting being enabled
...
also AP_Scheduler since we're calling and instance method on it
2024-04-18 08:25:15 +10:00
Peter Barker
ee038cdf1f
GCS_MAVLink: adjust for AP_SCHEDULER_ENABLED being false
2024-04-18 08:25:15 +10:00
Peter Barker
35dbf93e13
AP_Scheduler: fixes for AP_SCHEDULER_ENABLED
2024-04-18 08:25:15 +10:00
Peter Barker
fe9bcb9b5b
AP_Vehicle: cope with AP_Scheduler not being available
2024-04-18 08:25:15 +10:00
Iampete1
8f2b2cfe31
Filter: HarmonicNotchFilter: convert harmonics as a bitmask
2024-04-17 22:15:22 +01:00
Iampete1
cd0bdda93d
AP_Param: add convert_bitmask_parameter_width method
2024-04-17 22:15:22 +01:00
Tatsuya Yamaguchi
26ec2ae952
AC_AttitudeControl: fix ATC_SLEW_YAW description (NFC)
2024-04-17 22:18:51 +10:00
Peter Barker
b367fd0c1e
AP_RCMapper: exclude body of AP_RCMapper based on AP_RCMAPPER_ENABLED
2024-04-17 18:17:56 +10:00
Peter Barker
dc692f7169
AP_Arming: exclude body of AP_Arming.cpp based on AP_ARMING_ENABLED
2024-04-17 18:17:27 +10:00
Peter Barker
75bbff01c1
AP_DroneCAN: move Arming, Beacon and RC_Mapper into ardupilotwaf.py
...
these were built for all vehicles, so put them in the common list
2024-04-17 18:11:46 +10:00
Peter Barker
7d10b0fc4d
GCS_MAVLink: add and use AP_HOME_ENABLED
2024-04-17 18:09:25 +10:00
Peter Barker
9df6beb181
AP_AHRS: add and use AP_HOME_ENABLED
2024-04-17 18:09:25 +10:00
Randy Mackay
6a56b2bc94
AP_HAL_ChibiOS: correct CUAV-Nora periph power comment
2024-04-17 18:07:56 +10:00
Randy Mackay
1b4f62c1ea
AP_HAL_ChibiOS: correct CUAV-X7 periph power comment
2024-04-17 18:07:56 +10:00
Randy Mackay
69eff077d7
AP_HAL_ChibiOS: Durandal peripheral power on at startup
2024-04-17 18:07:56 +10:00
Randy Mackay
136ccf66c7
AP_HAL_ChibiOS: Pixhawk5X peripheral power on at startup
2024-04-17 18:07:56 +10:00
Randy Mackay
0b3b2148cb
AP_HAL_ChibiOS: Pixhawk6C peripheral power on at startup
2024-04-17 18:07:56 +10:00
Randy Mackay
561d1254a1
AP_HAL_ChibiOS: Pixhawk6X peripheral power on at startup
2024-04-17 18:07:56 +10:00
Randy Mackay
d951898f13
AP_DAL: visual odom get_delay_ms return fix
2024-04-17 18:05:26 +10:00
Andy Piper
2a786616b1
AP_IOMCU: account for possibility of SBUS_OUT in PWM structures
2024-04-17 17:49:56 +10:00
Andy Piper
ca3ad93f0d
AP_HAL_ChibiOS: iFlight BLITZ Mini F745
2024-04-17 17:34:10 +10:00
Andy Piper
bad4463463
AP_HAL_ChibiOS: iFlight Blitz F745
2024-04-17 17:34:10 +10:00
Gone4Dirt
9153c40568
AP_HAL_ChibiOS: MatekL431-Rangefinder: Add 2nd rangefinder
2024-04-17 17:06:42 +10:00
Andrew Tridgell
dce2492321
AP_NavEKF3: use filtered gyro in INS position correction
...
this reduces the impact of IMU noise on the output velocity from the
EKF
2024-04-17 14:53:59 +10:00
Andrew Tridgell
eed50a0872
AP_DAL: change gyro filter to 10Hz
...
this improved EKF3 IMU position correction for noise
2024-04-17 14:53:59 +10:00
Clyde McQueen
52a9bb7792
AP_Baro: disable BARO_FIELD_ELV for sub
2024-04-17 10:37:16 +10:00
Peter Barker
44359ff6b2
AP_Common: add get_alt - 100 times better than get_alt_cm
2024-04-16 19:14:12 +10:00
Peter Barker
423198cef0
AP_Frsky_Telem: avoid manipulation of alt frames outside of Location object
2024-04-16 19:14:12 +10:00
Leonardo Garcia
763193d4fc
AP_HAL_ChibiOS: Support for 3DR Control Zero H7 OEM rev G
...
Co-authored-by: Alexis Guijarro <totonzx@gmail.com>
Co-authored-by: Andy Piper <github@andypiper.com>
2024-04-16 14:10:13 +10:00
Peter Barker
cd9aa0e3ed
AP_GPS: remove dedundant crc32 routine from Nova
2024-04-16 10:02:47 +10:00
Peter Barker
b95bd8f19d
AP_AHRS: remove call to get_home()
...
this is our object, we don't need permission
2024-04-16 08:47:15 +09:00
Peter Barker
6ef131c0f9
SITL: correct diagnostic message about what AirSim-in addr we bound
...
Co-authored-by: Oleksiy Protas <elfy.ua@gmail.com>
2024-04-16 09:31:20 +10:00
Henry Wurzburg
5c4aeddae7
AP_HAL_ChibiOS: add MicoAir405Mini
2024-04-16 09:21:23 +10:00
Brad Bosch
6538e8c9ae
GCS_MAVLink: Cleanup and Reduce chance of GCS FTP timeout
...
Delete unneeded orphan comment
replace get_last_txbuf() with a predicate
Make txbuf flow control threashold consistent between Parameter download and FTP and keep it in range where we are also slowing down normal streams
Delay sending text banner until after first FTP response to reduce latency on slow links
Don't let flow control delay setting ftp.last_send_ms so as to slow down normal streams as soon as possible to improve FTP response time
2024-04-16 09:16:52 +10:00
Brad Bosch
bbfb0ed001
GCS_MAVLink: Make get_last_txbuf() safer
...
Add check for stale radio_status to get_last_txbuf()
Move last_txbuf into last_radio_status struct
2024-04-16 09:16:52 +10:00
Brad Bosch
0e47599bb1
GCS_MAVLink: respect txbuf flow control for FTP messages
...
This gives slow radio links a fighting chance of getting FTP bulk download working even when they use a baud rate which is much higher than their current bandwidth.
This should eliminate the need to disable FTP for parameter download on slow to moderate speed radio links like mLRS and ELRS. It allows removal of a hack in mLRS which results in a decrease in parameter download time for 19 Hz mLRS from 45-60 seconds to 11-17 seconds. This should also be good news for the ELRS rc-mavlink branch.
2024-04-16 09:16:52 +10:00
Oleksiy Protas
cadd121401
Bounds correctness for AnalogIn_IIO
2024-04-16 09:14:55 +10:00
FOG_Yamato
ac86bd8d21
hwdef: bdshot version of the MatekF765-SE
2024-04-16 09:13:43 +10:00
Peter Barker
5a21d0cb8a
AP_Camera: correct compilation when HAL_MOUNT_SET_CAMERA_SOURCE_ENABLED not set
...
- need the include because an enumeration is used in the header (relied on the include previously being made by a file including this header)
- set_lens is not part of set-camera-source, so shouldn't be excluded
- exclude entire method, not body of method based on the include
2024-04-14 13:33:00 +10:00
Peter Barker
a4ec91c4f1
AP_Follow: use Location.change_alt_frame for what it is good for
2024-04-14 13:29:58 +10:00
Andrew Tridgell
1cafe25854
AP_Scripting: improve INF inject driver
...
make it more robust to serial errors, and support correct checksum
2024-04-14 07:19:40 +10:00
Tim Tuxworth
495726344c
AP_Mount: Do not override default mode when first connecting to RC
2024-04-12 12:18:33 +09:00
Peter Barker
43995763db
AP_Camera: stop adjusting logged altitudes manually, use location methods
2024-04-11 22:39:09 +10:00
Peter Barker
d1a1bcba19
RC_Channel: process only transitions after rc is valid for arm_emergency_stop switch and parachute deploy switch
2024-04-11 22:17:08 +10:00
Andy Piper
563d31b1ea
AP_HAL_ChibiOS: fixups for FoxeerF405v2
2024-04-11 18:38:08 +10:00
Thomas Frans
d52f49ec36
AP_GPS: SBF report correct satellite count on NrSV DNU value
...
When the NrSV field of the SBF PVTGeodetic message contains the
Do-Not-Use value of 255, set the satellite count to 0 instead of
ignoring the change.
2024-04-11 18:35:16 +10:00
muramura
a9d0bf856e
AP_Mount: Do not perform unnecessary processing
2024-04-11 18:35:01 +10:00
murata
f605c0fbe3
RC_Channel: Notify function error if ADS-B is not implemented
2024-04-11 13:12:22 +10:00
Henry Wurzburg
6b5bb4e864
hwdef:add BIDIR to MatekH7A3
2024-04-11 10:17:43 +10:00
Peter Barker
468158e0f9
RC_Channel: add option to flight mode pause/resume via aux function
2024-04-11 10:17:35 +10:00
mateksys
74e7132bd3
hwdef: add MatekH7A3 readme.md
2024-04-11 10:17:17 +10:00
Peter Barker
f83cde7760
GCS_MAVLink: correct spelling of dereferecing
2024-04-10 21:56:52 +10:00
Peter Barker
292ad8678a
AP_Arming: force user to ack crashdump or get prearm failure
2024-04-10 21:56:52 +10:00
Andrii Fil
ed6ddf725d
AP_Parachute: optional (CHUTE_OPTIONS:1) disarm defore parachute release
2024-04-10 21:55:51 +10:00
Hubert
4893f1303c
hwdef: correct hwdef for MicoAir405v2
...
Update hwdef: DMA allocation and LED mapping
Update README: UARTs DMA allocation
Update defaults.parm: GPS low baudrate
2024-04-10 21:55:01 +10:00
Peter Barker
cd8f081611
AP_NavEKF: correct setting of _filled
...
Co-authored-by: luweiagi <luweiagi@163.com>
2024-04-10 21:53:54 +10:00
Peter Barker
99f5e74a8e
AP_NavEKF: correct initialisation of ekf_imu_buffer
...
this init() call can be called on an existing buffer, in which case we clear the object.
Presumably since we've just zeroed all the elements its safe to say that we should mark the object as having never-been-filled
2024-04-10 21:53:54 +10:00
Peter Barker
8452f5f0cd
AP_NavEKF: add tests for ekf_imu_buffer
2024-04-10 21:53:54 +10:00
Peter Barker
42c4329d4c
RC_Channel: require RC switch position transition for arming
...
currently if you turn your transmitter on at runtime we may try to arm the vehicle if your arming switches are asserted.
This patch changes things to we don't trust the first position seen from an RC receiver - we must see a transission for the arming options
2024-04-10 21:53:23 +10:00
Peter Barker
f55c35487b
AP_VisualOdom: correct unused variable in visualodom
...
when both logging and gcs are compiled out
2024-04-10 21:52:28 +10:00
Andrew Tridgell
739d4a7fc8
hwdef: the RM3100 should run at max 1MHz on SPI bus
2024-04-10 21:40:51 +10:00
Alexis Guijarro
a50c19f622
mRo Control Zero Classic: Added ADC input for servo rail
2024-04-10 19:01:51 +10:00
Peter Barker
b03b8309ef
AP_GPS: copy GPS metadata in for pre-per-instance-parameters
...
allows to not break older firmware in terms of available metadata
2024-04-10 16:37:35 +09:00
Peter Barker
0e6bca92f7
AP_HAL_ChibiOS: remove redundant lines from hwdef files
2024-04-10 17:28:48 +10:00
muramura
d4236a95c4
tools: change a word(NFC)
2024-04-10 14:20:04 +09:00
muramura
927cfeec68
AP_Airspeed: change a word(NFC)
2024-04-10 14:20:04 +09:00
Peter Barker
29149fad1b
hwdef: remove un-needed lines from CSKY405 hwdef
...
linting the hwdef showed this
2024-04-10 10:35:16 +10:00
Peter Barker
f16d0378e1
hwdef: compilation fix for CSKY405-fix
...
SCB-WAF: ../../libraries/AP_HAL/AP_HAL_Boards.h:372:2: error: #error "HAL_GPIO_LED_OFF must not be defined, it is implicitly !HAL_GPIO_LED_ON" 372 | #error "HAL_GPIO_LED_OFF must not be defined, it is implicitly !HAL_GPIO_LED_ON"
2024-04-10 10:35:16 +10:00
Andrew Tridgell
006d2c6cfe
hwdef: require bootloader for BotBloxSwitch
2024-04-10 09:59:14 +10:00
Peter Barker
27598d1026
AP_HAL_ChibiOS: add missing Math.h include
...
for "MIN"
2024-04-10 08:45:18 +09:00
Peter Barker
b0351cd339
AP_GPS: protect detection structures with GPS backend defines
...
Save some memory when backends are compiled out
2024-04-09 10:25:42 +10:00
Iampete1
03b00cb906
AP_Vehicle: call `uart_log` in `one_Hz_update`
2024-04-09 10:00:50 +10:00
Iampete1
264bd91f4e
AP_Logger: add log structures from AP_HAL
2024-04-09 10:00:50 +10:00
Iampete1
6017f372a2
AP_HAL_SITL: and `uart_log` method and stats struct
2024-04-09 10:00:50 +10:00
Iampete1
73f4a47496
AP_HAL_ChibiOS: and `uart_log` method and stats struct
2024-04-09 10:00:50 +10:00
Iampete1
e82502a4a4
AP_HAL: Util: add virtual `uart_log` method
2024-04-09 10:00:50 +10:00
Iampete1
1e63ec24a8
AP_HAL: UARTDriver: add log_stats method and log structure
2024-04-09 10:00:50 +10:00
Iampete1
e970a6cb5d
AP_HAL_SITL: UARTDriver: add getters for cumulative tx and rx counts
2024-04-09 10:00:50 +10:00
Iampete1
7dd2529683
AP_HAL_ChibiOS: UARTDriver: add getters for cumulative tx and rx counts
2024-04-09 10:00:50 +10:00
Iampete1
a4fd3980a8
AP_HAL: UARTDriver: add getters for cumulative tx and rx counts
2024-04-09 10:00:50 +10:00
Iampete1
c5ecddad92
AP_Logger: add bytes per second unit `B`
2024-04-09 10:00:50 +10:00
Henry Wurzburg
06efeb20cd
AP_Airspeed:add option to report cal offset to GCS
2024-04-09 09:54:21 +10:00
Peter Barker
44891ce570
AP_Vehicle: base-class implementation of set_home
2024-04-09 09:35:16 +10:00
Peter Barker
420f80db75
GCS_MAVLink: move handling of DO_SET_HOME up to GCS_MAVLink base class
2024-04-09 09:35:16 +10:00
Peter Barker
d78e96cc6b
AP_Vehicle: move handling of DO_SET_HOME up to GCS_MAVLink base class
2024-04-09 09:35:16 +10:00
Peter Barker
ecf93f6d86
hwdef: remove redundant defines from hwdefs
...
this is set in the periph defaults file
2024-04-09 09:32:15 +10:00
Henry Wurzburg
b0decff44f
AP_SCripting: update VTOL QuickTune to allow YAW FLTE = 0
2024-04-09 09:31:42 +10:00
Andy Piper
75978f9d6f
AP_HAL_ChibiOS: CB Unmanned Stamp H743
2024-04-09 09:26:40 +10:00
Henry Wurzburg
b69b2324e6
Filter:correct vehicles which can use throttle based notches
2024-04-08 23:11:03 +01:00
Peter Mullen
c0a8e6c96a
AP_Scripting: lua range finder driver that returns distances to a simulated sea floor for testing ArduSub surface tracking modes
2024-04-08 11:18:23 -03:00
richaravoil
4cdca46a0c
hwdef: adding IMU lines for older version of board
2024-04-08 22:30:57 +10:00
Andrew Tridgell
4933ef3f2d
AP_RCProtocol: fixed underflow wrap in GHST
2024-04-07 15:23:47 +10:00
Andrew Tridgell
5a2f711d85
AP_RCProtocol: added random data test
...
this triggers the CRSF crash bug that was just fixed
2024-04-07 15:23:47 +10:00
Andrew Tridgell
427384eb11
AP_RCProtocol: fixed crc memory range error in CRSF
...
this fixes a crash bug that caused a watchdog for Henry on a
F765-Wing. The bug happens with corrupt serial data causing an
underflow in the length argument to the crc call
2024-04-07 15:23:47 +10:00
Lanea Lucy S
01b0e0c27c
AP_Relay: added relay output invert function
2024-04-06 10:58:43 +11:00
Andy Piper
b9fede8a27
AP_HAL_ChibiOS: fixup FoxeerF405v2 build
2024-04-06 10:13:46 +11:00
Oleksiy Protas
364e6f06f3
AP_HAL_Linux: delay signal handlers setup
...
Allow default signals before full initialization in Linux, this makes sure we don't get an unkillable process if it hangs on initialization
Exit flag marked volatile to counteract possible compiler optimization due to the handler code running in a different context
2024-04-05 11:36:29 +11:00
Tatsuya Yamaguchi
f1d37fc051
AP_Stats: update flight time on disarm
2024-04-05 11:31:20 +11:00
James O'Shannessy
9dbc61f85b
AP_InertialSensor: Fix parameter name when saving persistent accel cals for Aux IMUs
...
Without this change, you get:
* IMU_ACCOFFS_*
* IMU_ACC2OFFS_*
* IMU_ACC3OFFS_*
* IMU3_ACCOFFS_*
After this change, you get:
* IMU_ACCOFFS_*
* IMU_ACC2OFFS_*
* IMU_ACC3OFFS_*
* IMU4_ACCOFFS_*
2024-04-05 11:02:04 +11:00
Philipp Borgers
1e2600c2e3
AP_Logger_MAVLink: Remove code that changes behavior when in SITL
...
The removed code changed behavior of the send_log_block function when
simulating with SITL. While I can understand the intention I do not
think that it is the right way to do it and has the potential to confuse
people debugging stuff with SITL and comparing to the real world.
2024-04-05 10:54:26 +11:00
Michael du Breuil
84cef5b786
AP_HAL_ChibiOS: add sw-boom-f407 and supporting scripts
2024-04-05 10:53:38 +11:00
AlexandrShipovsky
ace31e617e
AP_HAL_ChibiOS: add CSKY405 board
2024-04-05 10:45:00 +11:00
Andy Piper
fdce070f81
AP_HAL_ChibiOS: allow H7RF to build
2024-04-05 10:23:50 +11:00
Iampete1
d93cc7f113
AP_HAL_SITL: report baudlimit_enable in bw_in_bytes_per_second function
2024-04-03 13:10:06 +01:00
Iampete1
0b95b515bd
AP_HAL_SITL: implement uart_info to populate @SYS/uarts.txt
2024-04-03 13:10:06 +01:00
Iampete1
29559b6710
AP_HAL_Empty: update uart_info function for new signature
2024-04-03 13:10:06 +01:00
Iampete1
edc12c2857
AP_HAL_ChibiOS: use new UART stats tracking helper moving history up to util
2024-04-03 13:10:06 +01:00
Iampete1
c64124daf9
AP_HAL: Add StatsTracker helper
2024-04-03 13:10:06 +01:00
Andy Piper
b045939f1d
AP_HAL_ChibiOS: FoxeerF405v2
2024-04-03 18:50:52 +11:00
Peter Barker
47716e2338
hwdef: remove stray HAL_BUILD_AP_PERIPH defines
...
this is added by defaults_periph
2024-04-03 18:36:29 +11:00
Peter Barker
5fb4e1e285
hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED
2024-04-03 18:36:29 +11:00
Peter Barker
764f6863ea
hwdef: re-enable RCIN thread on some builds/boards
...
not because they need it, but to make a PR NFC
2024-04-03 18:36:29 +11:00
Peter Barker
994c268644
AP_HAL_ChibiOS: replace HAL_NO_RCIN_THREAD w/HAL_RCIN_THREAD_ENABLED
2024-04-03 18:36:29 +11:00
Henry Wurzburg
594c2466d8
HWDEF:revert copter only build on bds with integrated escs
2024-04-03 18:31:54 +11:00
Iampete1
dd4e212fbd
AP_Scripting: examples: update servo scan
2024-04-03 16:31:23 +09:00
Dave
d6488eb030
AP_HAL_ESP32: Added missing letter to printf statement
2024-04-03 16:18:02 +09:00
Peter Barker
b7fe779713
AP_HAL: move GPIO ON/off defaults from AP_HAL_ChibiOS to AP_HAL
...
these can be reused across different vehicles
2024-04-03 11:00:24 +11:00
Peter Barker
a65e06e0a9
AP_HAL_ChibiOS: move GPIO ON/off defaults from AP_HAL_ChibiOS to AP_HAL
...
these can be reused across different vehicles
2024-04-03 11:00:24 +11:00
Peter Barker
e1f3864349
hwdef: convert_betaflight_unified.py: don't set HAL_GPIO_LED_OFF
...
this value is the default value anyway, so don't make many copies..
2024-04-03 11:00:24 +11:00
Peter Barker
10627d296d
hwdef: remove HAL_GPIO lines which are simply the default values
...
... or the _OFF entry, which is simply !HAL_GPIO_MED_ON
2024-04-03 11:00:24 +11:00
Peter Barker
99dd85d51c
AP_HAL_ChibiOS: enforce HAL_GPIO_LED_OFF is not(HAL_GPIO_LED_ON)
...
the current "flexibility" allows for ON/OFF to be the same value.
Many hwdef files where only setting one of these, leaving the other at teh default, too....
2024-04-03 11:00:24 +11:00
Peter Barker
f70a1927f5
AP_HAL: chibios.h: remove defaulting of HAL_GPIO_LED_ON and _OFF
...
this same defaulting is being done in AP_HAL_ChibiOS/GPIO.h
2024-04-03 11:00:24 +11:00
mateksys
b904ab27f8
AP_HAL_ChibiOS: add MatekH7A3 defaults.parm
2024-04-02 15:29:55 +11:00
mateksys
4c3800c462
AP_HAL_ChibiOS: modify MatekH7A3 hwdef
2024-04-02 15:29:55 +11:00
Peter Barker
33e5b20709
hwdef: re-add ESC control to AP_Periph units which lost it
...
I'm quite sure that several of these don't actually want it, but want NFC
2024-04-02 11:28:27 +11:00
Peter Barker
416f7d393a
hwdef: remove DISABLE_SERIAL_ESC_COMM AP_Periph boilerplate
...
... use the defaults file instead
2024-04-02 11:28:27 +11:00
Maxim Buzdalov
9978b8f97f
AP_Arming: do not wait 10 seconds with single gyro/accel
2024-04-02 11:23:01 +11:00
Peter Barker
f28cfc9a3b
hwdef: remove handling of FULL_CHIBIOS_BOOTLOADER directive
...
the string FULL_CHIBIOS_BOOTLOADER doesn't exist anywhere else in the source code
2024-04-02 11:20:48 +11:00
Iampete1
b08034373f
AP_Logger: `Write_VER` keep g++ 7.5 happy by removeing non-trivial designated initializers
2024-04-02 11:13:55 +11:00
Iampete1
afe257a8db
AP_Mission: take location in `get_landing_sequence_start`, `jump_to_landing_sequence`, `jump_to_abort_landing_sequence`, and `is_best_land_sequence`, add helpers for scripting
2024-04-02 11:11:59 +11:00
Iampete1
b16f70a83d
AP_Landing: `restart_landing_sequence` get current location and pass it to `get_landing_sequence_start`
2024-04-02 11:11:59 +11:00
Clyde McQueen
10f39c3d28
GCS_Common: defer to AP_AHRS::set_origin to write logs
2024-04-02 11:00:22 +11:00
Clyde McQueen
f422537f70
AP_AHRS: set_origin calls Log_Write_Home_And_Origin on success
2024-04-02 11:00:22 +11:00
rmaia
30ea932e9b
AP_RCTelemetry: add extended RC link stats OSD fields
...
Adds RSSI dBm, SNR, LQ, Tx power and active antenna OSD fields
2024-04-02 10:30:24 +11:00
rmaia
ea91d6e171
AP_RCProtocol: add extended RC link stats OSD fields
...
Adds RSSI dBm, SNR, LQ, Tx power and active antenna OSD fields
2024-04-02 10:30:24 +11:00
rmaia
a1a87bd1f5
AP_OSD: add extended RC link stats OSD fields
...
Adds RSSI dBm, SNR, LQ, Tx power and active antenna OSD fields
2024-04-02 10:30:24 +11:00
Andrew Tridgell
1794c128a2
AP_Scripting: raise max FLTE for yaw to 8
...
better yaw for many vehicles
2024-04-02 10:28:34 +11:00
Henry Wurzburg
b83a895d7b
HWDEF: allow all build targets for non-integrated boarda
2024-04-02 10:17:21 +11:00
rishabsingh3003
b22e4fa085
AP_RangeFinder: Refactor RDS02UF rangefinder
2024-04-01 16:12:53 +11:00
rishabsingh3003
276ee86f38
AP_Math: Add RDS02UF RangeFinder CRC
2024-04-01 16:12:53 +11:00
rishabsingh3003
fc0084fe83
SITL: Update RDS02UF CRC
2024-04-01 16:12:53 +11:00
zebulon-86
871292cb29
AP_RangeFinder:add support for RDS02UF radar driver on serial
...
parameter RNGFNDx_TYPE is 42
Apply suggestions from code review
Co-authored-by: Peter Barker <pb-gh@barker.dropbear.id.au>
2024-04-01 16:12:53 +11:00
James O'Shannessy
ac271cf4e0
AP_InertialSensor: Improve bitmask indicating persistent parameters on bootloader flash
...
INS_TCAL_OPTIONS parameter description indicates a singular bit in a bitmask to persist Accels/TCAL parameters, however there are two separate bits for persistence.
2024-03-26 11:39:11 +11:00
Henry Wurzburg
0cfdc75c90
add 60x22 to OSD_TXT_RES metadata
2024-03-26 11:37:16 +11:00
Andrew Tridgell
17a61ab14b
AP_OSD: allow size of SITL OSD to be set with parameters
2024-03-26 11:36:48 +11:00
Andrew Tridgell
feb8c3be67
SITL: added SIM_OSD_ROWS and SIM_OSD_COLUMNS
2024-03-26 11:36:48 +11:00
Iampete1
8ccec7615c
AP_OSD: use `set_and_default` when ensuring first screen is enabled
2024-03-26 11:36:00 +11:00
Iampete1
c4691bef94
AP_DAL: Standalone: add int8 parameter set_and_default method to avoid include
2024-03-26 11:35:36 +11:00
Iampete1
21df26de75
AP_NavEKF3: use set_and_defualt when changing imu mask
2024-03-26 11:35:36 +11:00
Iampete1
b95b51f1a1
AP_NavEKF2: use set_and_defualt when changing imu mask
2024-03-26 11:35:36 +11:00
Ryan Friedman
6fc8185716
AP_ExternalAHRS: Only use GPS data when populating GPS fields
...
Signed-off-by: Ryan Friedman <ryanfriedman5410+github@gmail.com>
2024-03-26 11:23:06 +11:00
Ryan Friedman
35451c7021
AP_ExternalAHRS: Check backend pre-arm before origin
...
* This allows the backend to report more detailed errors
* Before this, many pre-arm errors were hidden by origin failure
* If pre-arm could report multiple errors, that would be ideal
Signed-off-by: Ryan Friedman <ryanfriedman5410+github@gmail.com>
2024-03-26 11:22:06 +11:00
Ryan Friedman
95ac178f20
Save flash, reduce code duplication
...
* Add generic health and time utils
* Fix bug only checking first GNSS system
* Use common logging struct
* Improve pre-arm log checks
Signed-off-by: Ryan Friedman <ryanfriedman5410+github@gmail.com>
2024-03-26 11:22:06 +11:00
Ryan Friedman
9edc0f8ec6
AP_ExternalAHRS: Don't send init message till booted up
...
Signed-off-by: Ryan Friedman <ryanfriedman5410+github@gmail.com>
2024-03-26 11:22:06 +11:00
Ryan Friedman
d383a19c29
AP_ExternalAHRS: Use state watching instead
...
Signed-off-by: Ryan Friedman <ryanfriedman5410+github@gmail.com>
2024-03-26 11:22:06 +11:00
Ryan Friedman
67b89a9b1f
AP_ExternalAHRS: Provide warning for init failure
...
* If the device hasn't initialized in 5 seconds, give a warning
Signed-off-by: Ryan Friedman <ryanfriedman5410+github@gmail.com>
2024-03-26 11:22:06 +11:00
Ryan Friedman
dc2815e9f5
AP_ExternalAHRS: Use filter data to populate EKF status report
...
* Variances vs uncertainties may still be off
* Requires enabling the following packets in SensorConnect:
* Position Uncertainty (LLH)
* Velocity Uncertainty (NED)
Signed-off-by: Ryan Friedman <ryanfriedman5410+github@gmail.com>
2024-03-26 11:11:39 +11:00
Peter Barker
8fc76e7455
hwdef: remove extraneous lines from hwdef files
...
these either come from includes are duplicated in these files
2024-03-26 11:09:03 +11:00
Peter Barker
395f438b42
chibios_hwdef.py: print error message if a define is re-defined at top level with same value
2024-03-26 11:09:03 +11:00
Peter Barker
eca2fd92b2
chibios_hwdef.py: correct extraction of intdefines
...
another regex problem
2024-03-26 11:09:03 +11:00
Peter Barker
58c0823264
AP_Radio: correct guards around code in AP_Radio_cc2500
...
these were missed in a cleanup; the header is already guarded with these
2024-03-26 11:07:42 +11:00
Peter Barker
1f3b4c47a0
hwdef: make a skyviper.inc, use it on skyviper-journey
2024-03-26 11:07:42 +11:00
Peter Barker
44477c3b62
AP_Notify: remove VRBrain board sub-types
...
these were only used to turn choose between AP_Notify LED backends, which can be done much more neatly with specific features defines.
2024-03-26 11:06:13 +11:00
Peter Barker
3387cad322
AP_HAL: remove VRBrain board sub-types
...
these were only used to turn choose between AP_Notify LED backends, which can be done much more neatly with specific features defines.
2024-03-26 11:06:13 +11:00