Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
33,091 Commits 71 Branches 509 Tags 780 MiB
Commit Graph

514 Commits

Author SHA1 Message Date
Lucas De Marchi b17acfee12 Add aerofc support 
Flight Controller board that comes on Intel Aero RTF Drone.
 2017-03-24 12:06:19 +11:00
Siddharth Bharat Purohit 5029dd1bab AP_HAL_PX4: GPIO: return correct FMU pin read even if IO not connected/detected 2017-03-22 12:15:05 +11:00
Andrew Tridgell fc4caf51e9 HAL_PX4: fixed RC failsafe for SBUS on FMUv4 
the FMUv4 SBUS parser sets timestamp_last_signal even if we are in
failsafe

thanks to Mark Whitehorn for finding this
 2017-03-18 17:36:13 +11:00
Lucas De Marchi f972fed70b AP_HAL_PX4: rename method to follow AP_HAL 
This allows to avoid the cast in the HAL, making it easier to replace
the implementation with an Empty::RCOutput while prototyping.
 2017-02-26 13:38:24 +11:00
Lucas De Marchi e1eda3066c AP_HAL_PX4: SPIDevice: add missing ifdefs 
These sensors may always be present on px4fmu* boards, but they are not
always present for all boards supported by the PX4Firmware.
 2017-02-26 13:37:13 +11:00
Andrew Tridgell 787a2093ec HAL_PX4: fixed motor test for brushed motors 
this fixes zero pwm output on a subset of channels. When using
motortest and asking for a single channel, multiple channels fired due
to an incorrect optimisation
 2017-02-02 09:27:48 +09:00
murata 9b1dadd93e AP_HAL_PX4: Unify from print or println to printf. 2017-01-27 18:20:22 +11:00
iseries1 e6a643f805 AP_HAL: define pixracer LED pins 2017-01-27 11:01:17 +09:00
Andrew Tridgell 1bd9d0b7f9 HAL_PX4: cleanup whitespace 2017-01-12 17:39:37 +11:00
Andrew Tridgell 05d9455f87 Revert "HAL_PX4: Add input parameter check." 
This reverts commit 5f41b09fde.

This change is completely incorrect. It is quite common to do SPI
transfers with zero send bytes, and is required for many sensors and
other devices
 2016-12-07 12:47:10 +11:00
murata d619d33374 AP_HAL_PX4: UARTDriver: Delete the condition that does not hold. 2016-12-05 16:53:36 -08:00
Andrew Tridgell e2192d5b4d HAL_PX4: report user bus number not system bus number 2016-12-05 16:51:49 -08:00
murata 5f41b09fde HAL_PX4: Add input parameter check. 2016-12-02 17:09:47 -08:00
Andrew Tridgell 23480a92ad HAL_PX4: only include parts needed for build 
allow for external USE_FLASH_STORAGE define in build
 2016-12-02 09:58:36 +11:00
Andrew Tridgell 6bc0c76d54 HAL_PX4: update for new AP_FlashStorage API 
allow flash sector erase while disarmed
 2016-12-02 09:49:40 +11:00
Andrew Tridgell a66924422f HAL_PX4: implement optional flash backend for storage 
this allows the last two flash sectors to be used as storage for
parameters, waypoints etc.

A change to the bootloader to not erase the last two sectors is needed
 2016-12-02 09:49:39 +11:00
Andrew Tridgell b0832e6c15 HAL_PX4: factor out storage functions 
ready for multiple backends
 2016-12-02 09:49:39 +11:00
Andrew Tridgell d4f679f954 HAL_PX4: removed support for old storage files on microSD 2016-12-02 09:49:39 +11:00
Andrew Tridgell 4cfd63c30a HAL_PX4: refactor storage to use bitmask class 2016-12-02 09:49:39 +11:00
Andrew Tridgell ed8f9b444a HAL_PX4: fixed whitespace 2016-12-02 09:49:38 +11:00
Andrew Tridgell ce5ed66b45 HAL_PX4: auto-scale brushed output with ESC output range 2016-11-30 10:53:26 +11:00
Andrew Tridgell b3286c3da0 HAL_PX4: support MODE_PWM_BRUSHED16KHZ 2016-11-30 10:53:25 +11:00
Andrew Tridgell 40bd3a8861 HAL_PX4: tidy up thread wait code 
use the same method for all threads. Makes for tidier top output
 2016-11-28 10:28:01 +11:00
Andrew Tridgell f039a37971 HAL_PX4: set names on all bus threads 2016-11-28 10:18:52 +11:00
Andrew Tridgell f04b186879 HAL_PX4: fixed bug in instantiation of I2C bus threads 
we ended up with a thread per device instead of a thread per bus!
 2016-11-28 09:53:19 +11:00
Andrew Tridgell 12e0c840e8 HAL_PX4: set thread names for main threads 2016-11-28 09:47:49 +11:00
Andrew Tridgell 37a9a78725 HAL_PX4: avoid bounce buffers for SPI when possible 2016-11-27 11:10:18 +11:00
Andrew Tridgell f3d401abb9 HAL_PX4: fixed FMUv1 build 2016-11-27 07:45:54 +11:00
Andrew Tridgell df60b4252a HAL_PX4: reduced noise in PX4 console 2016-11-26 19:06:15 +11:00
Andrew Tridgell 638e89bd1d HAL_PX4: implement set_chip_select for SPI 2016-11-25 21:24:10 +11:00
Andrew Tridgell 60801314e0 HAL_PX4: added different modes for external SPI 
and lower bus speed to 1MHz
 2016-11-25 21:24:10 +11:00
Andrew Tridgell bcb6663187 HAL_PX4: added table of actual bus speeds for SPI 2016-11-25 20:31:43 +11:00
Andrew Tridgell 0e793e1214 HAL_PX4: lower SPI bus speed on invensense devices 
now we are using DMA we don't need such high bus speed, and this makes
SPI reliable with a wider range of devices.
 2016-11-25 18:32:19 +11:00
Andrew Tridgell 29bbee421e HAL_PX4: enable sharing of SPI bus with PX4 with DMA 2016-11-25 17:50:18 +11:00
Andrew Tridgell 3fad5ca065 HAL_PX4: implement DMA allocation routines 2016-11-25 17:49:58 +11:00
Andrew Tridgell 7220dc15f9 HAL_PX4: adjusted bus speeds on invensense sensors 2016-11-25 17:49:57 +11:00
Andrew Tridgell 252f90ba36 HAL_PX4: drop I2C speed to 100kHz 
reduce I2C errors on long cables for all sensors
 2016-11-21 10:29:52 +11:00
Andrew Tridgell 00938f7dbb HAL_PX4: fixed enabled channels in init 
now this is called from AP_BoardConfig we need to not clear enabled
channels
 2016-11-13 13:16:22 +11:00
Andrew Tridgell 0502eca7fc HAL_PX4: removed unused variable 2016-11-13 13:16:22 +11:00
Andrew Tridgell 41018feb3a HAL_PX4: split I2C transfers 
this avoids SCL low with a stop condition, which doesn't work with
some devices
 2016-11-12 14:18:14 +11:00
Andrew Tridgell 8e61b15384 HAL_PX4: added ICM20608_EXT SPI device 2016-11-11 08:08:55 +11:00
Andrew Tridgell 96e42696b7 HAL_PX4: added icm20608-am SPI device 2016-11-09 17:08:12 +11:00
Andrew Tridgell b34ab2956b HAL_PX4: added access to external SPI connector on FMUv2 2016-11-09 17:08:12 +11:00
Andrew Tridgell 01fadb6e90 HAL_PX4: added per-device perf counter for I2C devices 2016-11-09 17:08:11 +11:00
Andrew Tridgell 42f242a07b HAL_PX4: fixed build on PX4-v1 2016-11-09 17:08:11 +11:00
Andrew Tridgell 20cd165476 HAL_PX4: allow for missing SPIDevice table entries 
removed panic
 2016-11-09 17:08:10 +11:00
Andrew Tridgell 922d5a74f7 HAL_PX4: print msg when I2C device is closed 2016-11-09 17:08:09 +11:00
Andrew Tridgell e5a4dd4e56 HAL_PX4: added perf counter on SPI devices 2016-11-09 17:08:09 +11:00
Andrew Tridgell 8bca8545a2 HAL_PX4: removed unused devname field in SPIDevice 2016-11-09 17:08:08 +11:00
Andrew Tridgell 18df213069 HAL_PX4: fixed initial SPI bus speed and report new SPI instances 2016-11-09 17:08:08 +11:00
Andrew Tridgell 4dc5dc87b5 HAL_PX4: added ICM20608 to SPI table 2016-11-09 17:08:08 +11:00
Andrew Tridgell 16489d2a13 HAL_PX4: implement device IDs for I2C and SPI 2016-11-09 17:08:04 +11:00
Andrew Tridgell e08babb7df HAL_PX4: added new SPI devices for PH2 2016-11-09 17:08:03 +11:00
Andrew Tridgell 4bc5b715bf HAL_PX4: define 9250 and fix SPI bus speeds 2016-11-09 17:08:01 +11:00
Andrew Tridgell 84f93439ca HAL_PX4: delay peripheral starup 
moved to AP_BoardConfig
 2016-11-09 17:07:59 +11:00
Andrew Tridgell e91b1318fb HAL_PX4: reformat 2016-11-09 17:07:58 +11:00
Andrew Tridgell 1bb450c722 HAL_PX4: moved to common DeviceBus class for thread management in I2C and SPI 2016-11-09 17:07:58 +11:00
Andrew Tridgell 972f85c490 HAL_PX4: go direct to NuttX for SPI transfers 2016-11-09 17:07:58 +11:00
Andrew Tridgell c7bef33ab7 HAL_PX4: fixed lsm303d SPI name 2016-11-09 17:07:57 +11:00
Andrew Tridgell 254b71468c HAL_PX4: added ms5611_int SPI descriptor 2016-11-09 17:07:57 +11:00
Andrew Tridgell 0a28a3a83a HAL_PX4: run SPI priority above boost prioriity 
otherwise ins sample wait can end up waiting on blocked SPI
 2016-11-09 17:07:56 +11:00
Andrew Tridgell 3aa36185e4 HAL_PX4: drop mpu6000 speed to 11MHz 
match previous driver
 2016-11-09 17:07:56 +11:00
Andrew Tridgell ed6df09d12 HAL_PX4: added lsm9ds0 entries to SPI table 2016-11-09 17:07:56 +11:00
Andrew Tridgell c2c7284a94 HAL_PX4: implement SPIDevice code for PX4 
with thread per bus
 2016-11-09 17:07:56 +11:00
Andrew Tridgell 88df9c7029 HAL_PX4: added thread-per-bus implementation for I2C 2016-11-09 17:07:55 +11:00
murata c808ee2f49 Global: To nullptr from NULL. 
RC_Channel: To nullptr from NULL.

AC_Fence: To nullptr from NULL.

AC_Avoidance: To nullptr from NULL.

AC_PrecLand: To nullptr from NULL.

DataFlash: To nullptr from NULL.

SITL: To nullptr from NULL.

GCS_MAVLink: To nullptr from NULL.

DataFlash: To nullptr from NULL.

AP_Compass: To nullptr from NULL.

Global: To nullptr from NULL.

Global: To nullptr from NULL.
 2016-11-02 16:04:47 -02:00
Lucas De Marchi a3140df24a AP_HAL_PX4: UARTDriver: remove commented out code 
This is not working and there's no reason to keep it around.
 2016-10-27 10:35:01 -03:00
Lucas De Marchi ec4d1eefca AP_HAL_PX4: UARTDriver: fix trailing whitespaces 2016-10-27 10:35:01 -03:00
Lucas De Marchi 4df627693d AP_HAL_PX4: UARTDriver: fix writting with failures 
When the buffer wraps and we do it in 2 steps, we can't actually do the
second part if it fails or if we wrote less bytes than we intended,
otherwise we will corrupt the data being sent.

While at it, just like in the write case, explain why we are stopping.
 2016-10-27 14:23:43 +11:00
Lucas De Marchi 4346f1dd83 AP_HAL_PX4: fix resetting TX buffer 
We can't give the TX buffer 16 bytes more since next time begin() is
called it will compare the buffer size to the value the caller is trying
to set.  In this case we would free and alloc the buffer again each time
begin was called.
 2016-10-27 14:23:43 +11:00
Murilo Belluzzo c7a65a026c AP_HAL_PX4: UARTDriver: Make use of ByteBuffer class 
This patch replaces the 'old style' ringbuffer by the ByteBuffer class.
An effort was made to keep the exchange as close as possible from a
drop-in replacement to minimize the risk of introducing bugs.

Although the exchange opens opportunities for improvement and
simplification of this class.
 2016-10-27 14:23:43 +11:00
Mathieu OTHACEHE 152edf7189 Global: remove mode line from headers 
Using a global .dir-locals.el file is a better alternative than
reincluding the same emacs header in every file of the project.
 2016-10-24 09:42:01 -02:00
Andrew Tridgell 9d6a5c6f04 HAL_PX4: make ready_to_arm state latching 
this fixes a race condition in the handling of the px4io safety switch
 2016-10-24 13:36:04 +11:00
Andrew Tridgell 2a44e6a7d7 HAL_PX4: cope with no px4io on FMUv2 
don't open px4fmu twice
 2016-10-23 17:15:32 +11:00
Andrew Tridgell c825c7b4cc HAL_PX4: disable FMU outputs again on re-engaging of safety switch 2016-10-21 09:10:55 +11:00
Andrew Tridgell e78651e8f2 HAL_PX4: fixed DSM bind on Pixracer 2016-10-13 19:58:00 +11:00
Andrew Tridgell c493ba81e4 HAL_PX4: fixed cork() for RCOutput 2016-10-13 10:00:04 +11:00
Lucas De Marchi ae53920e5b build: don't build examples with old build system 
We currently check examples are buildable with waf which doesn't need
the libraries to be specified in a make.inc file.  Having the makefiles
there is misleading since people try to build and realize the build is
broken.
 2016-10-11 13:03:08 +11:00
Andrew Tridgell aafd1512e4 HAL_PX4: limit IMU target temperature to 65 2016-09-05 12:59:50 +10:00
Lucas De Marchi e1ab44f4a3 Global: remove get_fd() from Device API 
This was there for compatibility with I2CDriver and SPIDriver. We don't
use them anymore so we can remove the compat method.
 2016-08-29 10:27:36 -03:00
Andrew Tridgell dddaded8d4 HAL_PX4: fixed a race condition in force_safety_on/off 
the status update from IO may not have come through if we force safety
on and then off in quick succession, such as for plane mixer load

this forces the ioctl to be sent at least once
 2016-08-16 12:53:34 +10:00
LukeMike 998033286d AP_HAL_PX4 / Semaphores: removed AP_HAL_VRBRAIN (for now it's better to have different AP_HAL for PX4 and VRBRAIN) 2016-08-07 20:31:50 +10:00
Murilo Belluzzo 077e03678f Global: Adapt Stream class to be used with Ringbuffer 2016-08-03 01:44:02 -03:00
Lucas De Marchi c859c5ecd9 AP_HAL_PX4: update Device interface 2016-07-30 00:55:27 -03:00
Lucas De Marchi 2ef78051c1 AP_HAL_PX4: remove I2CDriver 
I2CDevice now serves for the same purpose.
 2016-07-28 18:08:56 -03:00
Lucas De Marchi 293f94b355 AP_HAL_PX4: Util: fix check for PX4_V4 
When building for px4-v2 we have an warning because we are checking for
the value of this undefined macro. Just change both checks to use
"defined()".

../../libraries/AP_HAL_PX4/Util.cpp:115:7: warning: "CONFIG_ARCH_BOARD_PX4FMU_V4" is not defined [-Wundef]
 #elif CONFIG_ARCH_BOARD_PX4FMU_V4
       ^
 2016-07-19 17:53:46 -03:00
khancyr c4b009f4b5 AP_HAL_PX4 : remove unused variable 2016-07-19 17:44:22 -03:00
Andrew Tridgell 1b8da3bce2 HAL_PX4: implement I2CDevice driver for PX4 2016-07-15 12:24:03 -03:00
Andrew Tridgell 7c2e4d0419 HAL_PX4: implement IMU heater in hal.util for Pixhawk2 2016-07-01 15:29:52 +10:00
Tom Pittenger a512e807dc AP_HAL_PX4: disarm motors on reboot so ensure they are off during bootloader upload 2016-06-04 00:42:43 -07:00
Tom Pittenger 57d6ccc0dd AP_HAL_PX4: skip the 100ms delay on first px4io safety_state async attempt 2016-05-27 11:30:50 -07:00
Tom Pittenger 67aaf7e226 AP_HAL_PX4: defer calls to safety_state switch to queue an async attempt. 
- this allows for auto-retries if the state does not set correctly
 2016-05-27 21:34:40 +10:00
Andrew Tridgell dda35a366c HAL_PX4: prevent rate changes once oneshot is setup 
this fixes a problem with small motor outputs at the start of a motor
test.

Thanks to Luis for reporting this.
 2016-05-26 12:18:49 +10:00
Andrew Tridgell ae3cb0557d HAL_PX4: disable "Overtime in task" msg 
this hasn't helped us find any bugs and it is very annoying with nsh
over MAVLink
 2016-05-25 12:35:42 +10:00
Ricardo de Almeida Gonzaga 892cc2ea6f AP_HAL_PX4: Fix typos 2016-05-13 19:20:06 -03:00
Andrew Tridgell eeef28be5e AP_HAL_PX4: fixed hexacopter on Pixracer 
the _servo_count was 4 as we didn't re-fetch the count after applying
changes in AP_BoardConfig from BRD_PWM_COUNT
 2016-05-11 13:01:15 +10:00
Andrew Tridgell 8a7627474f Revert "AP_HAL_PX4: use new I2CDevice interface" 
This reverts commit f767918e0e.

These commits broke startup on PX4
 2016-05-11 12:19:00 +10:00
Andrew Tridgell 8c06e6cddc Revert "AP_HAL_PX4: embed PX4_I2C object into I2CDevice" 
This reverts commit 54fd3702c3.

These commits broke startup on PX4
 2016-05-11 12:18:45 +10:00
Lucas De Marchi 54fd3702c3 AP_HAL_PX4: embed PX4_I2C object into I2CDevice 
Otherwise we would destroy PX4_I2C object after returning from
I2CDeviceManager::get_device(). Since this implementation is very
simple, just make PX4_I2C as an internal class and embed it into the
I2CDevice object.
 2016-05-10 15:39:24 -03:00
Luiz Ywata f767918e0e AP_HAL_PX4: use new I2CDevice interface 2016-05-10 15:12:30 -03:00
Andrew Tridgell 0af322e90d HAL_PX4: added comment on oneshot 2016-04-22 13:50:05 +10:00
Andrew Tridgell 5ce7ae71a7 HAL_PX4: fixed enabling oneshot on a subset of motors 2016-04-22 13:24:24 +10:00
Andrew Tridgell bcd0d48ced HAL_PX4: fixed non-contiguous motor outputs 
this fixes tricopter with chan3 never set
 2016-04-22 11:51:08 +10:00
Andrew Tridgell 28aa4c40cc HAL_PX4: fixed order of wifi and frsky on FMUv4 
thanks to OXINARF for noticing!
 2016-04-20 10:23:11 +10:00
Andrew Tridgell 4a35f8e9fc HAL_PX4: fixed comments for FMUv4 uarts 2016-04-20 10:08:48 +10:00
Andrew Tridgell 18ccaf7e2b HAL_PX4: added uartF 2016-04-20 09:39:49 +10:00
Andrew Tridgell a731caa4ab HLA_PX4: prevent timer disturbance in oneshot mode 2016-04-16 18:52:31 +10:00
Andrew Tridgell d9d6f87195 HAL_PX4: fixed bug in pwm send code 
many thanks to Oxinarf for spotting this!
 2016-04-16 08:32:04 +10:00
Andrew Tridgell c9dfccfb26 HAL_PX4: improved oneshot support 
this now supports oneshot properly on both IO and FMU
 2016-04-16 07:30:44 +10:00
Andrew Tridgell 6f284d673a HAL_PX4: enable oneshot support on px4io 2016-04-16 07:30:43 +10:00
Peter Barker daa210729c AP_HAL_PX4: correct systemid output for PX4v4 2016-04-14 13:40:27 -07:00
Andrew Tridgell 8695668da3 HAL_PX4: enable wifi port on FMUv4 2016-04-14 08:05:06 +10:00
Andrew Tridgell 5922e67785 HAL_PX4: allow sbus output on channels beyond BRD_PWM_COUNT 2016-04-14 08:05:06 +10:00
Andrew Tridgell 759b0d6629 HAL_PX4: only support oneshot on FMU outputs for now 
oneshot on PX4IO gives some very weird results. I think it is doable,
but will take a bit more work
 2016-04-14 08:05:06 +10:00
Andrew Tridgell 934b4dd475 HAL_PX4: support OneShot on PX4 
this greatly lowers output latency
 2016-04-14 08:05:05 +10:00
Andrew Tridgell 1d5deed72a HAL_PX4: fixed build for new px4 param functions 2016-04-14 08:05:04 +10:00
Lucas De Marchi 28f67f0947 AP_HAL_PX4: replace header guard with pragma once 2016-03-16 18:40:41 +11:00
Andrew Tridgell 2a6e64e358 HAL_PX4: send all channels to px4io 
this allows for 16 channel SBUS out
 2016-03-13 10:03:56 +11:00
Jonathan Challinger 4bf3ec0e91 AP_HAL_PX4: implement RCOutput::read_last_sent 2016-03-10 13:56:27 -08:00
Andrew Tridgell 7fede90df3 HAL_PX4: work around a bus locking issue on Pixracer 
Pixracer has FRAM on the same bus as the ms5611 and the FRAM ramtron
driver does not use the same locking mechanism as other px4 SPI
drivers. We need to disable interrupts during FRAM transfers to ensure
we don't get FRAM corruption
 2016-02-23 16:34:06 +11:00
Lucas De Marchi 8de329fc81 AP_HAL_PX4: use empty I2CDevice 2016-02-16 19:49:09 -02:00
Lucas De Marchi f39a6745d1 Global: remove unused _timer_pending from scheduler 2016-02-12 23:42:34 -02:00
Lucas De Marchi 9aa49cda93 Global: remove system_initializing() from scheduler 
This is not used anymore.
 2016-02-12 23:42:34 -02:00
Gustavo Jose de Sousa c2e3f05dbf waf: ardupilotwaf: prefix build context methods with ap_ 
It helps to distinguish between things from waf and things from ardupilotwaf.
 2016-01-22 20:10:29 -02:00
Gustavo Jose de Sousa 3d22490397 waf: examples: use methods from bld instead of ardupilotwaf 2016-01-22 20:10:29 -02:00
Gustavo Jose de Sousa d281067bcc waf: make example binaries be placed in 'examples' dir 
This commit makes examples' wscripts use ardupilotwaf.example() instead of
ardupilot.program().
 2016-01-15 16:46:41 -02:00
Andrew Tridgell 519afc7a06 HAL_PX4: debug code for FRAM corruption 2016-01-06 19:16:16 +11:00
Andrew Tridgell 526fb65dd1 HAL_PX4: fixed setting of rcout frequency on alt channels 2016-01-05 09:47:52 +11:00
Jonathan Challinger f376510524 AP_HAL_PX4: fix example build 2015-12-29 10:46:35 -08:00
Lucas De Marchi a096703b06 Global: don't link with AP_Progmem 
AP_Progmem is not used anymore.
 2015-12-27 15:58:12 -02:00
Andrew Tridgell 02bee8810d HAL_PX4: added Semaphore support 2015-12-20 17:55:39 +11:00
Julien BERAUD c0f65ff6e1 AP_HAL_PX4: add empty optical flow 
No onboard optical flow on PX4
 2015-12-18 17:56:04 +11:00
Lucas De Marchi 503533c6fe AP_HAL_PX4: rename AP_HAL_Empty instances 2015-12-08 11:12:14 +11:00
Andrew Tridgell 78e9b0a4e3 HAL_PX4: check for servo counts changing after boot 
this copes with changes to BRD_PWM_COUNT
 2015-12-06 14:19:28 +11:00
Lucas De Marchi fe5d6f2d49 AP_HAL_PX4: remove unused AP_ADC_AnalogSource 2015-12-03 13:32:43 +11:00
Caio Marcelo de Oliveira Filho 6e7b73610d waf: add waf support 2015-12-03 07:54:30 +11:00
Lucas De Marchi 6d7678d2a3 AP_HAL_PX4: fix passing callback to member function 
This is the same approach as done for AP_HAL_Linux in e3d78b8 ("AP_HAL_Linux:
fix passing callback to member function"). It fixes the following warnings:

ardupilot/libraries/AP_HAL_PX4/Scheduler.cpp: In member function 'virtual void PX4::PX4Scheduler::init(void*)':
ardupilot/libraries/AP_HAL_PX4/Scheduler.cpp:55:95: warning: converting from 'void* (PX4::PX4Scheduler::*)()' to 'pthread_startroutine_t {aka void* (*)(void*)}' [-Wpmf-conversions]
  pthread_create(&_timer_thread_ctx, &thread_attr, (pthread_startroutine_t)&PX4::PX4Scheduler::_timer_thread, this);
                                                                                               ^
ardupilot/libraries/AP_HAL_PX4/Scheduler.cpp:65:94: warning: converting from 'void* (PX4::PX4Scheduler::*)()' to 'pthread_startroutine_t {aka void* (*)(void*)}' [-Wpmf-conversions]
  pthread_create(&_uart_thread_ctx, &thread_attr, (pthread_startroutine_t)&PX4::PX4Scheduler::_uart_thread, this);
                                                                                              ^
ardupilot/libraries/AP_HAL_PX4/Scheduler.cpp:75:92: warning: converting from 'void* (PX4::PX4Scheduler::*)()' to 'pthread_startroutine_t {aka void* (*)(void*)}' [-Wpmf-conversions]
  pthread_create(&_io_thread_ctx, &thread_attr, (pthread_startroutine_t)&PX4::PX4Scheduler::_io_thread, this);
                                                                                            ^
ardupilot/libraries/AP_HAL_PX4/Scheduler.cpp:85:100: warning: converting from 'void* (PX4::PX4Scheduler::*)()' to 'pthread_startroutine_t {aka void* (*)(void*)}' [-Wpmf-conversions]
     pthread_create(&_storage_thread_ctx, &thread_attr, (pthread_startroutine_t)&PX4::PX4Scheduler::_storage_thread, this);

ardupilot/libraries/AP_HAL_PX4/NSHShellStream.cpp: In member function 'void PX4::NSHShellStream::start_shell()':
ardupilot/libraries/AP_HAL_PX4/NSHShellStream.cpp:83:99: warning: converting from 'void (PX4::NSHShellStream::*)()' to 'pthread_startroutine_t {aka void* (*)(void*)}' [-Wpmf-conversions]
     pthread_create(&shell_thread_ctx, &thread_attr, (pthread_startroutine_t)&PX4::NSHShellStream::shell_thread, this);
                                                                                                   ^
 2015-12-03 07:51:08 +11:00
Lucas De Marchi 0c3733601b AP_HAL_PX4: use init() method without arguments 
Override the init() method from parent class that doesn't have a
parameter since it's not used here.
 2015-12-02 14:49:11 -02:00
Andrew Tridgell 520b9de48a HAL_PX4: expose do_transfer() in API 2015-12-01 07:18:25 +11:00
Andrew Tridgell 335e621932 HAL_PX4: cope with PX4 header changes 2015-11-27 18:54:31 +11:00
Andrew Tridgell 155e82c1b3 HAL_PX4: fixed PWM output for FMUv4 2015-11-27 18:54:31 +11:00
Andrew Tridgell 9835043dd5 HAL_PX4: support FMUv4 2015-11-27 18:54:30 +11:00
Caio Marcelo de Oliveira Filho c43474fbf4 AP_HAL_PX4: Remove unused extern declaration for HALs 2015-11-20 16:32:32 +09:00
Caio Marcelo de Oliveira Filho 1de0e0a5a6 AP_HAL_PX4: remove unused functions 2015-11-20 12:36:34 +09:00
Caio Marcelo de Oliveira Filho a76c9e0051 AP_HAL_PX4: use millis/micros/panic functions 2015-11-20 12:31:13 +09:00
Caio Marcelo de Oliveira Filho 8db8b9b355 AP_HAL_PX4: implement new AP_HAL functions 
Implement the new AP_HAL functions and use them in the Scheduler when
possible.
 2015-11-20 12:25:40 +09:00
Caio Marcelo de Oliveira Filho efbc7648b1 AP_HAL: create AP_HAL namespace and use for some HAL functionality 
For certain basic functionality, there aren't much benefit to be able to
vary the implementation easily at runtime. So instead of using virtual
functions, use regular functions that are "resolved" at link time. The
implementation of such functions is provided per board/platform.

Examples of functions that fit this include: getting the current
time (since boot), panic'ing, getting system information, rebooting.

These functions are less likely to benefit from the indirection provided
by virtual interfaces. For more complex hardware access APIs the
indirection makes more sense and ease the testing (when we have it!).

The idea is that instead of calling

    hal.scheduler->panic("on the streets of london");

now use

    AP_HAL::panic("on the streets of london");

A less important side-effect is that call-site code gets
smaller. Currently the compiler needs to get the hal, get the scheduler
pointer, get the right function pointer in the vtable for that
scheduler. And the call must include an extra parameter ("this"). Now it
will be just a function call, with the address resolved at link time.

This patch introduces the first functions that will be in the namespace,
further patches will implementations for each board and then switch the
call-sites. The extra init() function allow any initial setup needed for
the functions to work.
 2015-11-20 12:25:24 +09:00
Andrew Tridgell 8f4ce7f20b build: removed all nocore.inoflag files 
these were APM2 specific
 2015-11-16 08:05:17 +11:00
Andrew Tridgell ac1c0bba15 HAL_PX4: make available_memory() uint32_t 2015-11-05 16:09:00 +11:00
Lucas De Marchi 1b07dabeb7 Replace prog_char and prog_char_t with char 
prog_char and prog_char_t are now the same as char on supported
platforms. So, just change all places that use them and prefer char
instead.

AVR-specific places were not changed.
 2015-10-30 14:35:30 +09:00