dark0707
/
px4-firmware
forked from Archive/PX4-Autopilot
1
0
Fork 0
Code Pull Requests Activity
40,845 Commits 514 Branches 136 Tags 601 MiB
Commit Graph

502 Commits

Author SHA1 Message Date
Beat Küng bf11362dae i2c_posix: fix use of wrong device path 
previously, get_devname() was used as the I2C device path, but on NuttX,
get_devname() is the device file which the driver creates. This patch
changes it, so the sematics are the same as on NuttX: both now use _bus
to decide to which I2C bus device to talk to.

I did not see any other use-cases than the led on ocpoc.
 2017-07-13 16:53:28 +02:00
Beat Küng fc4affbb5f ocpoc_mmap_pwm_out: remove this driver, it's in linux_pwm_out now 2017-07-13 16:53:28 +02:00
Beat Küng 8527c8276f drivers: rename rpi_pwm_out to linux_pwm_out 2017-07-13 16:53:28 +02:00
Beat Küng d3f76262da RPI px4_no_shield.config: add documentation for connected HW 2017-07-13 16:53:28 +02:00
Beat Küng 243ae00e4e rpi_pca9685_pwm_out: remove this driver, it's now in rpi_pwm_out 2017-07-13 16:53:28 +02:00
Beat Küng 723f67b39a refactor navio_sysfs_pwm_out: rename to rpi_pwm_out 2017-07-13 16:53:28 +02:00
crossa 0340f96ad0 Rename px4_rpi.config to px4_no_shield.config 2017-07-13 16:53:28 +02:00
crossa 6a9aa60ad7 Add rpi_pca9685_pwm_out command 2017-07-13 16:53:28 +02:00
crossa 78b853431d change gps command 2017-07-13 16:53:28 +02:00
crossa 6ee6165592 PX4 RASPBERRY PI CONFIG 2017-07-13 16:53:28 +02:00
ChristophTobler add78a4b04 stream distance sensor at 10Hz for SITL-EKF testing 2017-07-11 13:59:12 +02:00
Daniel Agar 7a9e31f440 delete unused MPC_XY_FF and MPC_Z_FF (#7563) 2017-07-08 20:57:10 -04:00
Rogelio 9d9da229cc Add GPS command to all eagle configs 2017-07-08 20:28:30 +02:00
Lorenz Meier 72e452ba32 Add missing Iris config 2017-07-06 07:42:06 +02:00
Lorenz Meier a6ef6c6e33 SITL Launcher: gzserver must be running when gzclient connects 2017-06-27 11:59:29 +02:00
Daniel Agar a04d7989b1 eagle and excelsior fix UART_ESC_BAUD param 2017-06-12 12:18:53 -04:00
Daniel Agar 829e88587b SITL unit tests don't run perf (#7367) 2017-06-06 17:28:30 -04:00
Marco Zorzi aef522553e unmanned ground vehicle (UGV) controllers and Traxxas Stampede configuration (#7175) 2017-06-06 13:26:51 -04:00
davidaroyer 59057184ce posix-configs: update ocpoc config file 2017-06-04 04:24:50 +08:00
davidaroyer 0e6db671da posix-configs: add support for Aerotenna OcPoC-Zynq hardware 2017-06-04 04:24:50 +08:00
Daniel Agar 24b26e53b9 cmake organize code coverage handling and base 2017-06-02 19:35:18 -04:00
Nicolae Rosia 5467beed93 posix-configs rpi: add default values for Navio2 Power Module 
Signed-off-by: Nicolae Rosia <nicolae.rosia@gmail.com>
 2017-05-14 17:51:02 +02:00
Nicolae Rosia 32498009a3 navio_adc: add driver for Navio2 ADC 
Signed-off-by: Nicolae Rosia <nicolae.rosia@gmail.com>
 2017-05-14 17:51:02 +02:00
Mohamed Abdelkader Zahana cd1e04d43c support of multi uav simulation in SITL 2017-05-14 15:46:18 +02:00
Beat Küng 061bff14c8 rpi startup configs: set logger buffer size to 200 
Avoid dropouts, we have enough RAM there.
 2017-04-24 10:12:23 +02:00
Daniel Agar ea2a611f0b posix-configs replace sdlog2 with logger 2017-04-24 10:12:23 +02:00
jwilson 57fa031e2b Fixes problem preventing params on snapdragon platforms from being saved to flash memory. 2017-04-20 09:06:13 +02:00
James Goppert 955749ed6f Add iris_rplidar model (#6558) 
* Whitespace cleanup and add config for rplidar.

* Add rplidar target.

* Disable gps for rplidar.
 2017-04-10 03:06:21 -04:00
ChristophTobler 7aea4a33c0 use new logger for all eagle configs 2017-04-06 08:45:45 +02:00
ChristophTobler 3d1a10d4f2 Use new logger for Snapdragon Flight 2017-04-05 13:49:02 +02:00
Lorenz Meier 5f135acf33 Land detector: Add mode for rovers 2017-04-02 21:52:18 +02:00
Lorenz Meier bbd1906dfb Add Rover SITL config 2017-04-02 21:52:18 +02:00
bharath374 6e64bff494 Updated PID gains in 200qx config file 2017-04-02 12:15:37 +02:00
ChristophTobler 80e7475267 use snapdragon_pwm_out and change connector for RC 2017-03-29 20:11:34 +02:00
Mohammed Kabir 679b59b8d4 lpe : default fusion flags for GPS-only use 2017-03-26 14:05:23 +02:00
Matthias Grob bfb4de0e66 startup scripts/mc_pos_control: renamed parameters after refactor 2017-03-22 15:21:34 +01:00
ChristophTobler d5137ed794 set EKF2_AID_MASK and EKF2_HGT_MODE because of iris_opt_flow 2017-03-16 09:18:54 +01:00
Beat Küng df791cef94 RPi: make sure navio_rgbled works and add it to autostart 2017-03-12 00:08:35 +01:00
Beat Küng 4b1bbaa114 posix: remove rgbledsim driver which does nothing 
In addition this is almost a copy of the rgbled driver
 2017-03-12 00:08:35 +01:00
Beat Küng 644d237ce6 posix-configs scripts: remove unneeded 'sleep 1' 
There is no need to wait, and it would be the wrong way of doing
startup synchronization.
 2017-03-10 11:28:41 +01:00
Beat Küng 828bb983e8 rpi startup scripts: start dataman so that missions can be flown 2017-03-10 09:00:24 +01:00
Beat Küng 2a6eac578d rpi: add HIL config 2017-03-10 09:00:24 +01:00
Beat Küng 3a737097ee rpi px4.config: switch to ekf2 2017-03-10 09:00:24 +01:00
Daniel Agar e63ee9d8bd fw_att wheel controller enable param (default off) 2017-03-05 11:41:14 +08:00
Beat Küng 473192aa81 replay: some API refactoring & extensions 
in preparation to the updated ekf2 replay
 2017-03-04 22:47:54 +08:00
Beat Küng 037280c17d sitl: add iris_replay startup script, handle $replay_mode in sitl_run.sh 
usage:
export replay_mode=ekf2
export replay=<abs_path_to_log.ulg>
make posix none
 2017-03-04 22:47:54 +08:00
Daniel Agar 1bbca3bf1d test_dataman add to SITL with minor updates 2017-02-15 22:29:24 -05:00
Daniel Agar b14cb952ae sitl plane update tuning 2017-02-12 11:03:51 +01:00
Larry Wang 1beb2911e2 init shmem early to avoid random crash in fastrpc (#6407) 
* init shmem early to avoid possible crash

* fix_code_style

* Keep the initialziation to NULL, remove the duplicate memory allocation
 2017-01-21 08:30:46 +01:00
Michael Schaeuble 7aea2ca030 BebopFlow: Add V4L2 interface and image functionality 2017-01-20 23:09:13 +01:00
Michael Schaeuble 85aa710414 BebopRangeFinder: Integration into build and starup 2017-01-20 23:09:13 +01:00
wangxdflight b693e29d64 enable px4 flight for excelsior(legacy) 2017-01-16 08:25:58 -08:00
Dennis Mannhart d124de5045 px4.config: add spektrum_rc to startup 
added line at the end
 2017-01-03 20:54:06 +01:00
Daniel Agar c5c676cbd5 tests template remove list_builtins 2017-01-03 04:20:19 -05:00
Daniel Agar 573aed0ee8 tests coverage reorder to avoid lcov issues 2017-01-03 04:00:41 -05:00
Daniel Agar 6d4579751a tests add airspeedsim 2017-01-03 04:00:41 -05:00
Daniel Agar b4da337cd4 test coverage cleanup 
- dataman clean exit code
 - unit test proper cleanup
 - add some level of simulated sensors for tests
 - delete unused test/standard_vtol
 2017-01-03 04:00:41 -05:00
Daniel Agar 1ceb0bebb5 sitl tests don't manually stop mavlink and dataman 2017-01-02 10:14:41 +01:00
Daniel Agar 28971caaf3 partially restore mavlink_tests 2017-01-02 10:14:41 +01:00
Daniel Agar dc9a71b674 WIP startup_shutdown test with ASAN on 2017-01-02 10:14:41 +01:00
Daniel Agar 4f97ef417f sitl tests all config 2017-01-02 10:14:41 +01:00
Daniel Agar 74231e6656 split tests for SITL ctest 2017-01-02 10:14:41 +01:00
Lorenz Meier 9178bb7371 Add new posix_sitl_shell build target which allows to run -make posix_sitl_shell none- in order to get an empty shell 2017-01-01 13:59:41 +01:00
ChristophTobler 037d91c51c update posix-config for inav optical flow 2017-01-01 13:33:27 +01:00
Lorenz Meier 0205492a24 Update Mixer for LPE solo 2016-12-30 12:21:16 +01:00
jg 14ddc3018a fixed solo gazebo target 2016-12-30 12:20:15 +01:00
ChristophTobler 11de4d70a6 add config file for ekf2-optical flow 2016-12-30 10:39:57 +01:00
Lorenz Meier 48f1ae31dd Iris: use correct mixer for frame 2016-12-25 21:31:32 +01:00
Lorenz Meier 171ccd1203 POSIX SITL configs: Update default parameters to improve simulation behaviour 
The main changes include:
 * Better attitude tuning for airframes (more realistic models, the models had previously not as much thrust as the real vehicles)
 * Better waypoint and navigation default parameters which match the on-hardware parameters
 * More suitable minimum and trim airspeeds for VTOL and fixed wing which prevents stalls that happened in SITL previously (the new airspeeds match the real vehicles nicely)
 2016-12-25 18:15:51 +01:00
Lorenz Meier 42101671f4 Drop rate gains for H480 2016-12-24 16:14:52 +01:00
Lorenz Meier 07fecaa9d5 Re-tune the H480 config as we increased its simulated motor power recently. 2016-12-24 16:14:52 +01:00
James Goppert c28cd76e5f LPE fault relaxation and sitl fix (#6146) 
* Set LPE FUSE for standard iris sitl config.

* Relax fault detection handling.

* Always correct lidar.
 2016-12-23 15:08:37 -05:00
Beat Küng fca3a11907 RPI config: set SYS_MC_EST_GROUP 2016-12-22 16:54:15 +01:00
Beat Küng eadb55569b eagle configs: set SYS_MC_EST_GROUP 2016-12-22 16:54:15 +01:00
Beat Küng af99ecfe42 bebop config: set SYS_MC_EST_GROUP to 2 2016-12-22 16:54:15 +01:00
Beat Küng d828023e47 SITL startup config: set SYS_MC_EST_GROUP 
so that we know which estimator was used in the log file
 2016-12-22 16:54:15 +01:00
Beat Küng a3de7f7acc RPI: fix startup scripts: start navigator & load parameters 2016-12-22 15:17:58 +01:00
Roman c38e378f59 bebop config: updated some gains for decent performance 
Signed-off-by: Roman <bapstroman@gmail.com>
 2016-12-21 21:36:53 +01:00
James Goppert 6ff85fb927 LPE land bug fix and switch to fusion bit mask. 2016-12-21 08:43:18 +01:00
Roman d0d9ee373b bebop config: increase logger buffer from 20kB to 200kB 
Signed-off-by: Roman <bapstroman@gmail.com>
 2016-12-16 00:15:25 +01:00
Roman daa88f69db bebop2 config: updated some positon control params for decent performance 
- this is not the final tune!!!

Signed-off-by: Roman <bapstroman@gmail.com>
 2016-12-16 00:15:25 +01:00
Roman b0bca24526 bebop2 config: use logger instead of sdlog2 
- sdlog2 drops lots of data and logs very, very irregularly

Signed-off-by: Roman <bapstroman@gmail.com>
 2016-12-16 00:15:25 +01:00
Roman 5ce24e82f5 bebop2 apps: start other important apps, use ekf2 as estimator 
Signed-off-by: Roman <bapstroman@gmail.com>
 2016-12-15 00:11:13 +01:00
Andreas Antener be2451cfc7 SITL: use logger for standard_vtol and upload *.ulg files after integrationtests 2016-12-13 10:20:14 +01:00
Roman 88f771fc1e bebop2 startup config: start gps driver 
Signed-off-by: Roman <bapstroman@gmail.com>
 2016-12-12 23:48:15 +01:00
James Goppert 13df03c78a Fix bug with imu rotation for tyhpoon in sitl gazebo. (#5988) 2016-12-06 12:55:05 -05:00
James Goppert 4b6a11161e Fixes for sitl gazebo ground truth. (#5932) 
* Fixes for sitl gazebo ground truth.

* Switch ekf2 to new logging module for sitl.
 2016-12-03 11:40:53 -05:00
Beat Küng 707666488e RPi px4_fw.config: use AERT mixer file & fix fw_pos_control_l1 start 2016-11-24 14:57:52 +01:00
Beat Küng fdc489358a RPi startup scripts: start logger 2016-11-24 14:43:45 +01:00
mantelt 6cbd398974 RPi/Navio: add rpi baseline config for fw 2016-11-02 17:45:31 +01:00
Julian Oes 0a043365ec rename gazebo_tailsitter to tailsitter 
This is currently broken anyway but the new name makes more sense.
 2016-10-28 23:56:46 +02:00
Miguel Arroyo c6f43689e7 Adds Auto Mode Scanning 2016-10-06 09:00:09 +02:00
Hidenori e7b582502a Navio: change the GPS device 2016-10-06 09:00:09 +02:00
Michael Schaeuble 6bb03f3665 Add pitch angle to AK8963 for Bebop 2016-10-05 09:56:54 +02:00
bharathr 2f6abf26a3 Updated mainapp.config for 200qx and 210qc airframes (based off the generic flight version) 2016-10-02 16:06:08 +02:00
Beat Küng 35e93c24e8 fix sitl_multiple_run.sh: adapt to path updates 2016-09-30 13:50:51 +02:00
Beat Küng bb61144efc cmake: add posix_sitl_inav target 2016-09-29 07:28:03 +02:00
Daniel Agar 9fd0513be3 vtol remove unused vehicle_status 2016-09-27 08:49:45 +02:00
Daniel Agar 6d655d2d6e startup remove old EKF PE_ params (#5533) 2016-09-26 22:51:43 +02:00
Lorenz Meier bd922e4eed Standard VTOL: report correctly in SIM 2016-09-25 18:37:33 +02:00
Mark Whitehorn 8f64825297 switch to new logger for posix_sitl_default 2016-09-19 13:05:14 +02:00
Beat Küng 3ae2ca74c5 posix-configs: start vmount for typhoon 2016-09-19 07:55:38 +02:00
Beat Küng 057d71e101 posix-configs: use 'mixer append' command for typhoon mount mixer 2016-09-19 07:54:51 +02:00
Michael Schaeuble 40bf8f75d6 Add Bebop mixer and controller gains 2016-09-07 08:24:08 +02:00
Michael Schaeuble ad8f51f662 Update PX4 config to new functionality 2016-09-07 08:24:08 +02:00
Michael Schaeuble 5d3e9df731 Add DF wrapper for BebopBus driver 2016-09-07 08:24:08 +02:00
Lorenz Meier 3f07b03911 SITL: Tune standard VTOL to have better position control performance & update gazebo 2016-09-06 11:35:52 +02:00
John Hsu 340cb05f70 Add configurations for Zephyr SITL. Add init script for Zephyr SITL. Update hexa_x.main.mix with leg control. 2016-09-06 11:33:18 +02:00
Beat Küng 010c9e937b SITL: switch to HIL_ACTUATOR_CONTROLS mavlink message & add pwm_out_sim support for 16 outputs 2016-09-06 11:33:18 +02:00
Lorenz Meier 1d99f83b34 Add config for LPE and plane 2016-08-31 09:17:01 +02:00
James Goppert dbc5e90993 Change to sitl to allow no board rotation for gazebo. (#5400) 
* Change to sitl to allow no board rotation for gazebo.

* Fix typo in typhoon launch file and create config for lpe.

* Exit early on test failures
 2016-08-27 20:03:54 -04:00
Mark Whitehorn bad6f0032c change board rotation to zero (#5392) 2016-08-27 22:56:08 +02:00
Lorenz Meier f511d49cc2 Improvements to SITL to make paths more flexible. (#5181) (#5255) 
* Path cleanup for SITL.

* Restructured sitl scripts dir.

* Set integration tests to use ekf2 for vtol.

* Fix sitl paths for mac.
 2016-08-25 21:47:45 +02:00
James Goppert 818840b576 Path cleanup, low impact changes (#5340) 
* Low impact changes from path_cleanup branch.

This is a step towards minimizing the diff with path_cleanup branch.

* Update ecl.

* Revert matrix update.

* Revert ecl and matrix.

* Update sitl gazebo.

* Revert sitl_gazebo and matrix changes.
 2016-08-18 15:37:23 -04:00
Daniel Agar 8b9bef3872 osx fix and enable tests 2016-08-07 14:05:03 +02:00
Lorenz Meier 102f5b54d7 Revert "Improvements to SITL to make paths more flexible. (#5181)" 
This reverts commit 699b6a2cb3.
 2016-08-05 21:29:49 +02:00
James Goppert 699b6a2cb3 Improvements to SITL to make paths more flexible. (#5181) 2016-08-05 06:23:59 -04:00
Michael Schaeuble a3a855203c Update Bebop mainapp.config with new functionality 2016-08-05 10:15:11 +02:00
Michael Schaeuble e600e29ea4 Add DF wrapper for AK8963 2016-08-05 10:15:11 +02:00
Lorenz Meier db174cf8b1 Disable EKF2 3D fusion temporarily in SITL, fix missing fast-init params for some configs 2016-08-05 10:12:44 +02:00
sander 5710a0c040 Remove default geofence from gazebo_standard_vtol 2016-07-31 22:09:44 +02:00
Lorenz Meier 6ab9dc0acf Testing cleanup from Daniel Agar 2016-07-29 13:49:14 +02:00
James Goppert b6a9ff756c Rename mainapp to px4. 2016-07-29 11:05:01 +02:00
James Goppert 05315abc89 Optical flow simulator and install cleanup. (#5132) 
sitl CI is having some issue cloning, but I have verified it locally for various configs
 2016-07-24 13:07:14 -04:00
Julian Oes 317fd270d1 RPi: add mainapp.config again 
This file got deleted accidentally because all .config files were in
gitignore.
 2016-07-22 09:33:43 +02:00
Michael Schaeuble 7d11b32981 Add correct rotation for MPU6050 on Bebop 2016-07-22 09:21:55 +02:00
Michael Schaeuble 28de6d2cbd Update mainapp.config and add MPU6050 2016-07-22 09:21:55 +02:00
Julian Oes fa614a3cc1 RPi: just use RPI instead of RPI2. 
The reason for this change is that RPi2 and RPi3 are compatible, and
hopefully all differences coming up can be resolved without ifdefs but
at runtime.
 2016-07-16 15:51:00 +01:00
Julian Oes 2bf40efe8b RPi2: fuse mainapp/common and navio2 
We currently only support Navio2, so let's fuse the two configurations.
 2016-07-16 15:51:00 +01:00
Miguel Arroyo 17be06cf1a Fixes Navio2 Config Typo 2016-07-16 15:51:00 +01:00
Beat Küng 49614cfe38 SITL init scripts: add replay tryapplyparams & replay trystart 
These will only start replay if there's an environment variable 'replay',
otherwise they do nothing.

We apply the parameters even before loading the modules, so that the
modules 'see' the same state as the recorded system had. We will have to
see how well this works in practice.
 2016-07-11 09:26:35 +02:00
Lorenz Meier 7afe2e8dd8 Iris SITL: Default gains 2016-07-08 00:02:48 +02:00
Lorenz Meier eb6af9afb9 VTOL updates 2016-07-07 23:30:57 +02:00
Lorenz Meier 38652ec940 SITL: Re-tune multicopter gains 2016-07-07 23:28:21 +02:00
Julian Oes 1631cfdc83 Eagle: SDLOG_PRIO_BOOST to raise sdlog2 priority 
This should lead to less drops on Snapdragon although it's hard to
verify this.
 2016-07-07 16:48:27 +02:00
bharathr d96810f250 Removed px4 config file for 200qx P1 board, updated P2 board version to support Qualcomm ESCs 2016-07-03 12:43:54 +02:00
bharathr 29be7c3003 Updated motor-esc mappings in 200qx config file 2016-07-03 12:43:54 +02:00
bharathr 9131647566 Fixed UART_ESC_MODEL parameter in 200qx config file 2016-07-03 12:43:54 +02:00
bharathr 00243a9842 Updated 200qx config files (removed calib files, cleaned up and renamed all files) 2016-07-03 12:43:54 +02:00
Lorenz Meier 2a729028bd SITL: Set battery cells 2016-07-02 11:41:23 +02:00
Hidenori ee58188162 Split Navio2 specific parts from general RPI2 files 
For Navio2, make posix_navio2_release and use navio2.config.
 2016-07-01 23:08:17 +02:00
Hidenori 76ee17e532 RC input and PWM output for Navio2 2016-07-01 23:08:17 +02:00
Lorenz Meier e43625cfc1 ROMFS: Clear out SITL mixers from deployed image, delete unused mixers, move test mixers to test config 2016-07-01 18:08:32 +02:00
Daniel Agar 377726a9a7 sitl gazebo plane fix land detector startup order (#4932) 2016-06-30 13:56:06 +02:00
Andreas Antener c9f278e46f fix rcS for standard vtol 2016-06-28 22:44:49 +02:00
Andreas Antener 00d56b9ef8 added VTOL mission test, updated mission test to check mission depending on vehicle state 2016-06-28 22:44:49 +02:00
Lorenz Meier 33e259e827 Update controller gains to match better vehicle models 2016-06-26 22:25:55 +02:00
Julian Oes 6618cac10a RPi2: don't forget to start the baro 2016-06-25 12:00:49 +02:00
Julian Oes e56be33e50 RPi2: switch from ekf2 to q/inav 2016-06-25 12:00:49 +02:00
Julian Oes 8b8766e840 RPi2: put drivers back in 2016-06-25 12:00:49 +02:00
Andreas Antener d1b27ab056 moved params NAV_OBL to COM_OBL 2016-06-20 19:23:11 +02:00
Andreas Antener d3d9f013f4 set OBL parameters for iris 2016-06-20 19:03:10 +02:00
Andreas Antener ced8376268 added offboard lost actions with additional timeout 2016-06-20 19:03:09 +02:00
Michael Schaeuble 83ec092b46 Update bebop configuration and use parameters 2016-06-20 12:55:01 +02:00
Michael Schaeuble 696a378120 Add modules and commands to bebop build 2016-06-20 12:55:01 +02:00
Lorenz Meier b2cfe05881 Adjust Typhoon H480 gains 2016-06-20 12:54:22 +02:00
Lorenz Meier c647b6db4d Update gains 2016-06-18 17:36:48 +02:00
Lorenz Meier d860bdcdc0 Update VTOL gains 2016-06-18 17:03:49 +02:00
Lorenz Meier 3ef6ee056f Sync rate control gains 2016-06-18 16:58:04 +02:00
Lorenz Meier afdc8cdf55 VTOL: Use standard attitude gains 2016-06-18 16:29:28 +02:00
Lorenz Meier 0126e49841 Solo: Use the right mixer 2016-06-17 22:44:42 +02:00
Lorenz Meier dff50072e9 Add new airframe meta files 2016-06-17 22:44:42 +02:00
Lorenz Meier c248adb18d Fix tuning gains for Solo and tailsitter 2016-06-17 22:44:42 +02:00
Julian Oes da0813b842 Snapdragon: make RC calibration easier 
20 Hz of RC_CHANNELS makes the RC calibration in QGC a more pleasant
thing.
 2016-06-10 11:20:22 +01:00
Julian Oes 51defb9de2 px4.config: remove unneeded commands 2016-06-07 22:10:56 +02:00
Lorenz Meier 7a6ff4742d Add Solo sim model (#4761) 2016-06-07 21:25:35 +02:00
Lorenz Meier c02214f745 Update RPI2 config 2016-06-05 12:55:14 +02:00
Lorenz Meier 93ef7ea4f6 posix-configs/eagle/hil 2016-06-05 12:54:41 +02:00
Lorenz Meier 44c222f6b7 Update Eagle flight config 2016-06-05 12:54:27 +02:00
Lorenz Meier 8a7fd9c889 Update 210qc config 2016-06-05 12:54:12 +02:00
Lorenz Meier 131a1613af Update 200qx config 2016-06-05 12:53:58 +02:00
Lorenz Meier 6b97a9ece8 Update Bebop config 2016-06-05 12:53:44 +02:00
Lorenz Meier b0d05c19bc Update SITL config posix-configs/SITL/init/rcS_multiple_gazebo_iris 2016-06-05 12:53:32 +02:00
Lorenz Meier 6608c98192 Update SITL config posix-configs/SITL/init/rcS_lpe_jmavsim_iris 2016-06-05 12:43:04 +02:00
Lorenz Meier 53b1bbd49f UPpdate SITL config posix-configs/SITL/init/rcS_lpe_gazebo_iris_opt_flow 2016-06-05 12:42:52 +02:00
Lorenz Meier 50f4a603e8 Update SITL config posix-configs/SITL/init/rcS_lpe_gazebo_iris 2016-06-05 12:42:37 +02:00
Lorenz Meier 17e28ceeb1 Update SITL config posix-configs/SITL/init/rcS_jmavsim_iris 2016-06-05 12:42:22 +02:00
Lorenz Meier e5ba214f34 Update SITL config posix-configs/SITL/init/rcS_gazebo_tailsitter 2016-06-05 12:42:08 +02:00
Lorenz Meier da943b0007 Update SITL config posix-configs/SITL/init/rcS_gazebo_standard_vtol 2016-06-05 12:41:55 +02:00
Lorenz Meier a651f3dae5 Update SITL config posix-configs/SITL/init/rcS_gazebo_plane 2016-06-05 12:41:43 +02:00
Lorenz Meier b198638a6c Update SITL config posix-configs/SITL/init/rcS_gazebo_iris_opt_flow 2016-06-05 12:40:41 +02:00
Lorenz Meier e19b373347 Updatee SITL config rcS_gazebo_iris 2016-06-05 12:40:25 +02:00
Julian Oes 1880d1f6fd Snapdragon: start sdlog first to log everything (#4734) 
In order to capture everything for replay logs, start sdlog2 at the very
beginning. Also, wait with starting the sensors for a second, to make
sure sdlog2 has started by then.
 2016-06-05 12:01:38 +02:00
bharathr 6f9665d718 Restored 210qc snapdragon config files 2016-06-04 15:12:01 +02:00
Julian Oes d030444733 posix-configs: start HMC5883 before MPU9250 in DF 
We need to start the external mag before we start the internal mag on
the MPU9250 because the ekf2 does not support voting for the sensor with
the highest priority (or failures) yet, so it will just subscribe to
whatever is at 0.
 2016-05-31 16:43:13 +02:00
jwilson c6250657eb Added mag support to the DriverFramework mpu9250 driver. Shortened parameter names for legacy drivers. Added temporary ifdef's in the calibration code for Snapdragon Flight builds. 
Signed-off-by: jwilson <jwilson@qti.qualcomm.com>
 2016-05-31 16:43:12 +02:00
Michael Schäuble d9422e0296 Add Parrot Bebop as build target (#4698) 
* Add parrot bebop build structure

* Add upload functionality to bebop build

* Add modules and commands to bebop build
 2016-05-31 13:04:22 +02:00
Lorenz Meier 55c7ffbe62 Fix more Qualcomm param length issues 2016-05-28 14:36:51 +02:00
Lorenz Meier afa3429bdb 210qc: Fix sample rate 2016-05-28 14:24:55 +02:00
Lorenz Meier aa355d86d0 200qx: Fix sample rate 2016-05-28 14:24:38 +02:00
Julian Oes 9d489b9b0f Snapdragon: rename uart_esc to pwm_out_rc_in 
The name uart_esc was initially taken by Qualcomm's UART ESC driver but
then got changed into the current mavlink ESC/RC helper. Since the
uart_esc is still around, we should prevent the names clashing.
 2016-05-28 11:42:12 +02:00
Lorenz Meier ff5a481c34 Remove unneeded EKF2 configs 2016-05-28 11:34:08 +02:00
Lorenz Meier c3974446bd Update Gazebo tuning gains 2016-05-28 11:31:39 +02:00
jwilson 64c3b330ee Partial fix for Snapdragon HITL mode 2016-05-23 17:58:59 +02:00
Kabir Mohammed 529460d573 Fix RPi2 build system 2016-05-19 15:41:50 +02:00
Julian Oes 6ddffb71ea SITL init: set EKF2 params for SITL 
The sensors in the SITL environment are near ideal, so the
initialization in ekf2 can happen quicker.
 2016-05-18 12:44:04 +10:00
Julian Oes 1e155776fd Revert "Switch from EKF2 to LPE since SITL s is not any more a bearable workflow with EKF2 init lag" 
This reverts commit 503966165b.
 2016-05-18 12:44:04 +10:00
Julian Oes 920d2ef1e8 posix sdflight: add navigator to Linux side 2016-05-14 11:21:44 +02:00
Lorenz Meier 503966165b Switch from EKF2 to LPE since SITL s is not any more a bearable workflow with EKF2 init lag 2016-05-13 22:05:07 +02:00
korotkoves a8bbbcbff5 scripts for runnung multiple SITL 2016-05-13 13:23:54 +02:00