Commit Graph

2960 Commits

Author SHA1 Message Date
Peter Barker 5b34a9bf13 hwdef: remove redundant MODE_TURTLE_ENABLED
this is defined later in the file
2023-10-19 20:53:28 +11:00
AerofoxTech 63f28b6720 hwdef: To adapt the rotation directionof the QMC5883L on new Aerofox-Airspeed-DLVR 2023-10-18 19:50:46 +11:00
AerofoxTech c0780a45c1 hwdef: Adapt the rotation direction of the QMC5883L 2023-10-18 19:50:10 +11:00
bugobliterator 1ae842e4ed AP_HAL_ChibiOS: add option to set HAL_SPI_SCK_SAVE_RESTORE 2023-10-18 19:25:19 +11:00
bugobliterator 6c13d7bee9 AP_HAL_ChibiOS: fix mode setting for ICM45686 on CubeOrangePlus 2023-10-18 19:25:19 +11:00
bugobliterator 57f6f8e34d AP_HAL_ChibiOS: add support for saving and restoring SCK pin state
when SPI goes into undefined state during reset
2023-10-18 19:25:19 +11:00
Andy Piper 7a937cd23a AP_HAL_ChibiOS: correct printing of timer information 2023-10-18 18:01:48 +11:00
Henry Wurzburg 42d4b2671b hwdef:fix bug in AtomRCF405NAVI,fix some bds that aren't building 2023-10-17 18:21:04 +11:00
Iampete1 e736d5ecb7 AP_HAL_ChibiOS: hwdef: scripts: defaults_periph: disable unused libaries by defualt 2023-10-17 10:23:20 +11:00
muramura e0a012919c hwdef: Cite CubeOrange-SimOnHW as the default file 2023-10-14 17:55:56 +11:00
Peter Barker 4b0958fb4f hwdef: correct compilation of CubeOrange-SimOnHW
../../libraries/AP_InertialSensor/AP_InertialSensor_config.h:20:2: error: #error "INS_AUX_INSTANCES must be zero if INS_MAX_INSTANCES is less than 3"
   20 | #error "INS_AUX_INSTANCES must be zero if INS_MAX_INSTANCES is less than 3"
      |  ^~~~~
2023-10-13 17:26:35 +11:00
jfbblue0922 0f1e766269 AP_HAL_ChibiOS: JFB110 board definition
Co-authored-by: Randy Mackay <rmackay9@yahoo.com>
2023-10-12 17:03:04 +11:00
Peter Barker 28d827cedc AP_HAL_ChibiOS: add RTC support to GPS periphs that log
this re-adds support for RTC into GPS peripherals that also log.  This was removed as these boards were calling methods on the nullptr
2023-10-11 19:17:27 +11:00
Peter Barker cf96791fe2 AP_HAL_ChibiOS: add and use HAP_PERIPH_ENABLE_RTC 2023-10-11 19:17:27 +11:00
Peter Barker 53f4709a78 AP_HAL_ChibiOS: disable RTC on periphs
the singleton isn't instantiated
2023-10-11 19:17:27 +11:00
Henry Wurzburg 912a088c2b hwdef: Create correct README and add defaults to ease setup 2023-10-11 19:11:16 +11:00
muramura 007c3460ea AP_ChibiOS: Delete the same definition 2023-10-11 14:42:32 +11:00
rishabsingh3003 5897aab566 hwdef: add MatekL431 ADSB Periph 2023-10-09 16:18:13 -07:00
thu5cob 49d7d0b1c4 HAL_ChibiOS: Fix stm32l4+ flash issue
stm32l4+ flash reset register has been reset properly
2023-10-06 14:52:34 +11:00
Henry Wurzburg de7dd9d692 hwdef:add VTX power control to SpeedyBeeF405-Wing 2023-10-06 14:51:52 +11:00
Peter Barker 3b2dec7ec6 hwdef: CubeOrangePlus: build abin files
... for use with flash-from-SD-card
2023-10-05 18:55:48 +11:00
alexklimaj e1b991a84a hwdef: ARKV6X ADIS16507 example 2023-10-05 08:21:50 +11:00
Peter Barker fe9932855b hwdef: HerePro requires AHRS to compile 2023-10-04 18:10:58 +11:00
Andy Piper 9ff3d21c20 AP_HAL_ChibiOS: add support for NeoPixelRGB 2023-10-04 18:06:17 +11:00
Andrew Tridgell da0870f616 HAL_ChibiOS: enable mavlink bindings for ADSB periph 2023-10-02 21:45:28 +11:00
Peter Barker e2975a67e7 AP_HAL_ChibiOS: use AP_GPS_ENABLED to exclude more code when GPS not compiled in 2023-09-27 16:38:15 +10:00
Peter Barker 0824eca776 AP_GPS: use AP_GPS_ENABLED to exclude more code when GPS not compiled in 2023-09-27 16:38:15 +10:00
Andy Piper 82452758b4 AP_HAL_ChibiOS: write out serial ports that are available when configuring 2023-09-26 11:31:08 +10:00
James O'Shannessy 70bee8e67a AP_HAL_ChibiOS: Explicitly include InternalError
Debug builds utilise internal error in the Util class.

The include was being passed up from Logger->LoggerMessageWriter->LoggerBackend->Bitmask.
Periph Builds tend not to have HAL_LOGGING_ENABLED, and so the include was not present.
2023-09-20 19:51:48 +10:00
Andy Piper 36fc7521ea AP_HAL_ChibiOS: modify prescaler based on dshot type 2023-09-20 17:35:44 +10:00
Andy Piper 1b1e5b1085 hwdef: correct inversion pin on MambaF405v2
correct battery setup for MambaF405v2
provide suitable serial defaults for MambaF405v2
reallocate DMA channels to allow full DMA on USART3 and NeoPixel on MambaF405v2
add camera control pin to MambaF405v2
2023-09-19 11:43:58 +10:00
Henry Wurzburg d13085d4bb HWDEF:Correct hwdef of BETAFPV-F405 2023-09-19 08:03:58 +10:00
Andrew Tridgell ebffc8fc65 HAL_ChibiOS: fixed CAN statistics on F4/L4/F3/F7 2023-09-19 07:33:53 +10:00
subashchandar d1e8cef9b6 AP_HAL_ChibiOS: Increase limit for Storage pages
STm32l4+ has 512 flash pages in dual flash mode
2023-09-17 21:03:37 +10:00
subashchandar 2207f7bb14 AP_HAL_ChibiOS: change adc sampling rate
STm32l4r5 adc sampling rate.
2023-09-17 21:02:42 +10:00
Davide_Lentini 5b0d7928bd hwdef: Update luminousbee5 defaults.parm 2023-09-14 12:40:59 +10:00
Michael du Breuil dcfd9f6586 AP_HAL_ChibiOS: Add sw-nav-f405 target
Navlight board with a compass, requires #24945 for status light to work
2023-09-14 10:56:20 +10:00
Henry Wurzburg ae05df22eb HWDEF: Correct define errors in HEEWING and Tmotor bds 2023-09-14 10:38:01 +10:00
TunaLobster 6f80f8f200 AP_HAL_ChibiOS: Add hwdef for ARK_CANNODE 2023-09-13 17:06:02 +10:00
Andy Piper f02b34fc02 hwdef: mRoControlZeroOEMH7 bdshot version 2023-09-13 17:04:24 +10:00
Andy Piper feabd1f568 AP_HAL_ChibiOS: hwdef for Flywoo F405 Pro 2023-09-13 17:03:51 +10:00
Andy Piper 9387236e6c AP_HAL_ChibiOS: prefer bi-directional dshot channels that can be shared on F4 and F7 2023-09-13 17:03:51 +10:00
Andy Piper f3ac8f9d75 hwdef: SpeedyBeeF405Mini 2023-09-12 09:23:39 +10:00
cuav-chen2 13195464d5 hwdef: added ICP-20100 baro to CUAV_GPS 2023-09-08 18:03:02 +10:00
Ryan Friedman f92a6bf2b2 AP_HAL_ChibiOS: Remove executable permissions
* Fixes a pre-commit violation; the ioc files are not supposed to be executable

Signed-off-by: Ryan Friedman <ryanfriedman5410+github@gmail.com>
2023-09-08 17:09:26 +10:00
yjuav 914c3c702d hwdef: Modify YJUAV_A6SE board TIME12 to TIM8 2023-09-08 07:57:07 +10:00
Peter Barker 6bb5723b18 hwdef: fpv/osd boards get turtle, flowhold and msp 2023-09-06 20:32:06 +10:00
Peter Barker b9df48e2ec AP_HAL_ChibiOS: include hexa and octa frames in mimimize_fpv_osd 2023-09-06 20:32:06 +10:00
Peter Barker bc83de5eac hwdef: fpv/osd boards get CRSF Text and spektrum telemetry 2023-09-06 20:32:06 +10:00
Peter Barker 0400282416 hwdef: fpv/osd boards get Tramp 2023-09-06 20:32:06 +10:00
Peter Barker d3c32ba440 hwdef: add comments clarifying use of each of the minimize includes 2023-09-06 20:32:06 +10:00
Peter Barker 91e1dac053 hwdef: minimize_fpv_osd.inc: remove features not needed for fpv/osd 2023-09-06 20:32:06 +10:00
Peter Barker 7deb7e2c20 ArduCopter: disable turtle mode in minimize_features.inc
instead of using the define.

This enables turtle mode on minimised fpv-osd boards.
2023-09-06 20:32:06 +10:00
Peter Barker 472dda6555 AP_HAL_ChibiOS: disable turtle mode in minimize_features.inc
instead of using the define.

This enables turtle mode on minimised fpv-osd boards.
2023-09-06 20:32:06 +10:00
Peter Barker 19b066a46a hwdef: enable SmartAudio on fpv-osd boards 2023-09-06 20:32:06 +10:00
Peter Barker cdfabf2038 hwdef: enable RunCam on fpv-osd boards 2023-09-06 20:32:06 +10:00
Peter Barker 9dda151a2d hwdef: make soaring and crsf aailable on minimized-OSD boards 2023-09-06 20:32:06 +10:00
Peter Barker c29948c69a hwdef: do not remove OSD in common minimized boards 2023-09-06 20:32:06 +10:00
Peter Barker 1c07c875d6 hwdef: recreate minimize_features.inc to just include minimize_common.inc 2023-09-06 20:32:06 +10:00
Peter Barker d55c08009f hwdef: rename minimize_features.inc to minimize_common..inc 2023-09-06 20:32:06 +10:00
Andy Piper c6511b513b AP_HAL_ChibiOS: T-Motor H743 Mini 2023-09-06 17:13:07 +10:00
Andy Piper 194f555c7b AP_HAL_ChibiOS: provide mcu defaults in betaflight conversion 2023-09-06 17:13:07 +10:00
Andy Piper 2160a1afb4 AP_HAL_ChibiOS: correct hwdef generator battery scale 2023-09-06 17:13:07 +10:00
Andy Piper ee8631e9fd AP_HAL_ChibiOS: cope with different IMU drivers in hwdef conversion 2023-09-06 17:13:07 +10:00
Andrew Tridgell 698673b0b2 hwdef: reduced size of f103-periph bootloader
serial not needed
2023-09-06 11:21:51 +10:00
Andrew Tridgell 684385c7d5 hwdef: reduced size of Hitec-Airspeed bootloader
serial not needed in bootloader
2023-09-06 11:21:51 +10:00
Andrew Tridgell ea51aea2e5 hwdef: removed most CAN_APP_NODE_NAME defines
both bootloader and AP_Periph now default to
"org.ardupilot.BOARD_NAME". This makes it much easier to find the
right firmware for update
2023-09-06 11:21:51 +10:00
Andrew Tridgell fb5dba9d86 hwdef: disable HAL_USE_CAN on all boards except f103-periph
setting HAL_USE_CAN uses the ChibiOS CAN driver instead of the AP_HAL
CAN driver. This is only used on the f103-periph as it significantly
reduces the size of the bootloader, which allows for f103 builds to
fit in the limited flash

on all other builds we are much better off using the HAL CAN driver as
it is much faster
2023-09-06 11:21:51 +10:00
Andrew Tridgell fbd44dddd0 HAL_ChibiOS: enable ISRs during flash ops in bootloader
this makes a huge difference in AP_Periph bootloader speeed, where
disabling interrupts prevents CAN packets from being received
2023-09-06 11:21:51 +10:00
Peter Barker c7080825d3 AP_HAL_ChibiOS: chibios_hwdef.py: canonicalise AP_PERIPH env define
before this change this environment variable is a string, which means anything checking it for truth will get back true even if it is empty ("") or the string zero ("0").  The existing is_periph_fw check only works because "1" != 0 - if it was "0" then it would still be considered a periph firmware
2023-09-06 09:28:37 +10:00
Peter Barker f6f6b08af8 hwdef: include defaults.parm files from other identical defaults.parm
where the files were identical and the board an obvious derivative, grab the defaults.parm from the other place.
2023-09-05 11:37:19 +10:00
Davide_Lentini 5a996952f6 hwdef: Update defaults.parm luminousbee5 2023-09-05 07:29:26 +10:00
Andrew Tridgell ef3d42ee9d HAL_ChibiOS: fixed bootloader build with F4 CAN 2023-09-05 06:56:51 +10:00
Andrew Tridgell bc373354fc HAL_ChibiOS: enable CAN stats on AP_Periph for bxCAN interface
this allows for dead interface detection
2023-09-05 06:56:51 +10:00
Andrew Tridgell d5fbce0547 AP_HAL_ChibiOS: added last_transmit_us to CAN stats 2023-09-05 06:56:51 +10:00
Vincent Poon 1b6148cba8 hwdef: Restore I2C2 on HolybroG4_GPS
I2C2 was removed by mistake previously, causing LED Driver to not function.
2023-09-01 13:44:23 +10:00
Andrew Tridgell c0cd255135 hwdef: use HAL_PERIPH_ENABLE_PROXIMITY 2023-09-01 13:04:59 +10:00
subashchandar 3cfa13c0b2 AP_HAL_CHIBIOS: allow RCIN thread priority to be overridden
Add provision to change Rcin thread priority
-needed to increase priority for some low speed cpu
2023-08-31 09:24:05 +10:00
Iampete1 2fbc27584b AP_HAL_ChibiOS: default to 0 battery capacity on periph 2023-08-30 12:25:46 +10:00
Peter Barker b751224ae1 hwdef: don't include solo gimbal or oreoled on thepeach autopilots 2023-08-29 11:14:15 +10:00
Andrew Tridgell 8888cac10f hwdef: added DMA for USART3 for MatekL431-RC and GPS
this allows for faster connections

also added 4 PWM output requested by Josh and Sampson
2023-08-29 08:00:20 +10:00
Tim Tuxworth 2850740bd8 hwdef: added QiotekAdeptF407 2023-08-26 21:14:15 +10:00
Andrew Tridgell e1f3cb9f71 hwdef: added AR-F407SmartBat
balance plug DroneCAN periph node
2023-08-26 21:12:42 +10:00
Andrew Tridgell 202e71482f HAL_ChibiOS: support CKS32F407 MCU
based on STM32F407
2023-08-26 21:12:42 +10:00
Andrew Tridgell 999919424b hwdef: allow for MCO pin to be configured
this allows for hwdef.dat lines like this:

  PA8 MCO1 RCC
  PC9 MCO2 RCC

you can control the scaling by defining the following:

- STM32_MCO1SEL
- STM32_MCO1PRE_VALUE
- STM32_MCO2SEL
- STM32_MCO2PRE_VALUE
2023-08-25 07:37:12 +10:00
MallikarjunSE 00879e9b0b AP_HAL_ChibiOS/hwdef: Add hwdef for Sierra True series periphs 2023-08-24 17:47:05 +10:00
MallikarjunSE 5e6591fa58 AP_HAL_ChibiOS/hwdef: Add hwdef for Sierra-PrecisionPoint 2023-08-24 17:45:31 +10:00
Andrew Tridgell 49f1e5d1db HAL_ChibiOS: removed ESC scaling, moved to AP_HAL 2023-08-24 13:06:40 +10:00
Andrew Tridgell 39153a1c01 AP_HAL_ChibiOS: removed native_millis/micros 2023-08-24 13:06:40 +10:00
Peter Barker 81326a17db hwdef: qiotek: correct HAL_BATT_MONITOR_DEFAULT define name 2023-08-23 17:20:20 +10:00
Tom Pittenger ed43f095ce AP_HAL_ChibiOS: add AP_BATTERY_ESC_TELEM_OUTBOUND_ENABLED to defaults_periph 2023-08-22 16:14:36 -07:00
Andy Piper 37a3f85a9a AP_HAL_ChibiOS: add 8 bi-directional dshot channels to KakuteH7-Wing 2023-08-22 11:08:14 +10:00
Andrew Tridgell aaec99ae31 hwdef: removed baro from HolybroG4_GPS
not included in production versions, and baro is not generally a good
idea on a GPS due to impact of airflow

also disable unused IMU, SPI bus and 2nd I2C and re-enable 2nd CAN as
helical units have dual CAN
2023-08-22 09:37:20 +10:00
Peter Barker efa680f1e0 AP_HAL_ChibiOS: add hwdef for bootloader for MatekL431-RC 2023-08-20 17:37:44 +10:00
Peter Barker ca549e1887 hwdef: add MatekL431-RC for RC input 2023-08-19 20:27:24 +10:00
Peter Barker 103caac92c AP_HAL_ChibiOS: add support for DroneCAN RCInput packets 2023-08-19 20:27:24 +10:00
Tom Pittenger 27f9a54a54 AP_HAL_ChibiOS: fix CubeRed default MAC Address 2023-08-17 13:51:54 +10:00
Peter Barker bb6f0ae527 AP_HAL_ChibiOS: improve gating of use of AP_InternalError library
- gate calls into library directly on the define
 - INTERNAL_ERROR becomes empty if library not compiled in
2023-08-17 09:16:46 +10:00
Peter Barker c2f4fb5def hwdef: use APJ_BOARD_ID mapping for ACNS-CM4Pilot 2023-08-17 09:13:54 +10:00
Peter Barker 19bd97a893 chibios_hwdef.py: permit board ID to be specified as a string 2023-08-17 09:13:54 +10:00
Peter Barker b8978ad73a hwdef: explicitly state no-bootloader-embedding on some boards 2023-08-17 08:37:31 +10:00
Peter Barker a11df25490 chibios_hwdef.py: enforce presence of bootloader if embedding desired 2023-08-17 08:37:31 +10:00
yunjiuav f92073fa4d HAL_ChibiOS: modify APJ_BOARD_ID of YJUAV_A6SE 2023-08-17 08:35:18 +10:00
Andy Piper 7896b04365 AP_HAL_ChibiOS: betafpv F450 AIO hwdef 2023-08-16 17:51:23 +10:00
Henry Wurzburg b1fc5bd69f AP_HAL_ChibiOS: add missing bootloader binaries 2023-08-16 17:49:00 +10:00
Peter Barker 7273c8416a AP_HAL_ChibiOS: prevent Periph bricking problem when paniccing early
if Periph panics before we mark the scheduler as initialised then we don't watchdog, which we really need to do on periph nodes so they can be re-flashed conveniently.
2023-08-16 17:21:30 +10:00
yjuav ac993753eb Modify the LED light pins and adjust the direction of the IMU and COMPASS sensors. 2023-08-15 08:35:26 +10:00
yunjiuav 5671e502d3 HAL_ChibiOS: added YJUAV_A6SE support 2023-08-15 08:35:26 +10:00
Andy Piper 75c1ad6efa AP_HAL_ChibiOS: explicitly set dshot rate when using iomcu 2023-08-15 06:53:48 +10:00
Andy Piper c6c78a9c32 AP_HAL_ChibiOS: ensure reverse and reversible masks are applied to iomcu 2023-08-15 06:53:48 +10:00
Andy Piper 52dbac1de7 AP_HAL_ChibiOS: run STM32F103 core clock at 72Mhz on 24Mhz oscillators 2023-08-15 06:53:48 +10:00
Andy Piper 33c40eaba3 AP_HAL_ChibiOS: add iomcu dshot for Pixhawk1, Pixhawk5X and fmuv5 2023-08-15 06:53:48 +10:00
Andy Piper 876f4f7a8f AP_HAL_ChibiOS: dshot iofirmware for Durandal, Pixhawk6C, CubePurple and CubeYellow 2023-08-15 06:53:48 +10:00
Andy Piper 1c646d2986 AP_HAL_ChibiOS: use f103 iofirmware for Pixhawk6X 2023-08-15 06:53:48 +10:00
Andy Piper c057cc5485 AP_HAL_ChibiOS: add get_output_mode() and use it to print correct banner for iomcu
add support for undef of STM32 lines and DMA_NOMAP
add support for F103 running at 24Mhz
add f103 variants of iofirmware
reduce memory usage in iomcu for new model
correct pwm output reporting
split iofirmware into config + mcu to allow f103 definition
don't enable non-existant timers on F103
2023-08-15 06:53:48 +10:00
Andy Piper 83fddd0d61 AP_HAL_ChibiOS: enable iomcu-dshot on CubeBlack 2023-08-15 06:53:48 +10:00
Andy Piper 10a612566a AP_HAL_ChibiOS: ensure shared DMA works in IOMCU
enable TIM4 in shared mode on IOMCU for dshot
stop the PWM peripheral in rcout DMA swapping on IOMCU to prevent UART corruption
provide debugging options on iomcu dshot
support unshared DMA with iomcu dshot
optimize rcout on iomcu
tune iomcu stack for 8 channels
2023-08-15 06:53:48 +10:00
Andy Piper 3c42f1b7d9 AP_HAL_ChibiOS: disable stack checking on iomcu 2023-08-15 06:53:48 +10:00
Andy Piper 837c81af5e AP_HAL_ChibiOS: fix sending of dshot commands to all channels 2023-08-15 06:53:48 +10:00
bugobliterator 9a21297cd1 AP_HAL_ChibiOS: add support for DShot on IOMCU
set timer counter size to be a byte wide
use HAL_DSHOT_ENABLED instead of DISABLE_DSHOT
build iomcu-dshot from existing iomcu
correct defines for DMAR size on iomcu
allow iomcu dshot rate to be configured from FMU
correct DMA allocation for dshot on iomcu
allow debug builds on iofirmware
ensure dshot is enabled on iomcu dshot
support proper iomcu dshot output thread triggered by FMU
allow selective disablement of serial LEDs and passthrough
disable serial LEDs and passthrough on iomcu-dshot
propagate ESC telemetry to iomcu
dshot_send_groups() for iomcu
remove use of ICU on iomcu for dshot. only allocate possible DMA channels
rename serial passthrough and dshot defines
update dshot docs
resize dshot iomcu main stack to minimum
correct dshot prescaler usage and bit_width_mul calculation
use ChibiOS in tickless mode on iomcu-dshot so that virtual timers can be used
propagate dshot commands to iomcu
passthrough oneshot125 to iomcu
2023-08-15 06:53:48 +10:00
Andy Piper f233a65580 AP_HAL_ChibiOS: add global interrupt handlers for TIM15 and TIM17 on F1 2023-08-15 06:53:48 +10:00
alexklimaj 738a4c638a hwdef: arkv6x default to no IO MCU 2023-08-14 12:06:25 +10:00
Andy Piper 205e6bebc7 AP_HAL_ChibiOS: fix incorrect removal of HAL_I2C_INTERNAL_MASK undef in SkystarsH743HD 2023-08-12 14:00:11 +10:00
Tom Pittenger 2b30fbcfb2 AP_HAL_ChibiOS: disable RPM by default on Periph 2023-08-11 13:31:45 -07:00
Peter Barker e638925ee0 AP_HAL_ChibiOS: chibios_hwdef.py: fix minor bugs
also mark as flake8-clean
2023-08-11 10:41:02 +10:00
Peter Barker 536f3ac922 chibios_hwdef.py: minor flake8 fixes
whitespace, long lines, ambiguous variables etc
2023-08-11 10:41:02 +10:00
Andy Piper f787e940b3 AP_HAL_ChibiOS: change incorrect I2C internal mask from SkystarsH7HD bdshot 2023-08-10 16:16:16 +10:00
Andy Piper 9212a24248 AP_HAL_ChibiOS: properly support CRSF on HEEWING-F405
update HeeWing F405 README to reflect VTX pinout
2023-08-09 17:44:14 +10:00
Peter Barker ceab0180ec AP_HAL_ChibiOS: remove use of HAL_BUILD_AP_PERIPH
turn torqeedo off in chibios_hwdef.py instead for Periph
2023-08-09 17:39:49 +10:00
Peter Barker 68e3b1e79b AP_HAL_ChibiOS: move rangefinder rotation default down into AP_Periph 2023-08-09 17:39:49 +10:00
Peter Barker 67988320a7 hwdef: disable sending of RELAY_STATUS on mimimized boards 2023-08-09 07:44:07 +10:00
Andy Piper fe56a6aedd AP_HAL_ChibiOS: allow 8 bdshot channels on mRoControlZeroH7 2023-08-08 11:50:56 +10:00
Peter Barker 53d5d1b9a9 AP_HAL_ChibiOS: break out include files for firmware defaults 2023-08-08 11:45:50 +10:00
Peter Barker 009172685e AP_HAL_ChibiOS: avoid use of MINIMIZE_FEATURES define in Copter directory 2023-08-08 10:35:19 +10:00
Peter Barker 646704c5dc AP_HAL_ChibiOS: remove MINIMIZE_FEATURES define 2023-08-08 10:35:19 +10:00
Michael du Breuil c1e6f130dd AP_HAL_ChibiOS: CubeOrange map EXTERN_DRDY and !EXTERN_CS to ADC 2023-08-08 09:16:56 +10:00
Peter Barker 37de51f1d4 hwdef: remove un-needed lines in KakuteH7 config
these are the default values, and KakuteH7 isn't minimized
2023-08-06 17:36:25 -07:00
Andrew Tridgell 0333e92cbc hwdef: update SIYI_N7 hwdef
the N7 isn't the same as the Durandal. It has 1 CAN bus, and 2 less
UARTs, and an extra compass. This fixes the hwdef.dat to match the
schematic
2023-08-06 09:23:45 +10:00
Tom Pittenger 8bddd4168b AP_HAL_ChibiOS: update hwdefs for eth 2023-08-06 09:20:08 +10:00
Tom Pittenger d59c3d7de0 AP_HAL_ChibiOS: remove common_eth.ld 2023-08-06 09:20:08 +10:00
Tom Pittenger 772465fef3 AP_HAL_ChibiOS: fix whitespace 2023-08-06 09:20:08 +10:00
bugobliterator f84572a545 AP_HAL_ChibiOS: remove legacy define WATCHDOG_DISABLED 2023-08-06 09:20:08 +10:00
bugobliterator cf6fd6717b AP_HAL_ChibiOS: fix alignment for Ethernet safe memory 2023-08-06 09:20:08 +10:00
Tom Pittenger 9698291920 AP_HAL_ChibiOS: fix unused var compile error 2023-08-06 09:20:08 +10:00
bugobliterator 5c657cad9a AP_HAL_ChibiOS: disable AP_Periph_Heavy for CubePilot-CANMod 2023-08-06 09:20:08 +10:00
bugobliterator 7bdee92d77 AP_HAL_ChibiOS: disable CAN2 on CubePilot-CANMod 2023-08-06 09:20:08 +10:00
bugobliterator 4e39318920 AP_HAL_ChibiOS: disable watchdog on CubePilot-CANMod 2023-08-06 09:20:08 +10:00
bugobliterator 50ae1ca7e8 AP_HAL_ChibiOS: update CubePilot-CANMod to support Networking 2023-08-06 09:20:08 +10:00
bugobliterator e6b51df7cd AP_HAL_ChibiOS: dynamically allocate memory for MAC Peripheral 2023-08-06 09:20:08 +10:00
Tom Pittenger ec65b5175b AP_HAL_ChibiOS: update Networking hwdef's param defaults 2023-08-06 09:20:08 +10:00